updated pot file

1 files changed, 978 insertions, 679 deletions

diff --git a/perl-install/share/po/nb.po b/perl-install/share/po/nb.po
index 1f58f0577..6a402a046 100644
--- a/perl-install/share/po/nb.po
+++ b/perl-install/share/po/nb.po
@@ -17,7 +17,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: nb\n"
-"POT-Creation-Date: 2006-01-17 20:17+0800\n"
+"POT-Creation-Date: 2006-01-26 11:06+0100\n"
 "PO-Revision-Date: 2005-09-21 23:11+0200\n"
 "Last-Translator: Per Øyvind Karlsen <pkarlsen@mandriva.com>\n"
 "Language-Team: Norwegian Bokmål <cooker-i18n@mandrivalinux.com>\n"
@@ -217,21 +217,21 @@ msgstr "Oppdager og setter opp enheter.."
 #: printer/printerdrake.pm:2249 printer/printerdrake.pm:2267
 #: printer/printerdrake.pm:2276 printer/printerdrake.pm:2285
 #: printer/printerdrake.pm:2296 printer/printerdrake.pm:2360
-#: printer/printerdrake.pm:2511 printer/printerdrake.pm:2924
-#: printer/printerdrake.pm:3208 printer/printerdrake.pm:3214
-#: printer/printerdrake.pm:3779 printer/printerdrake.pm:3783
-#: printer/printerdrake.pm:3787 printer/printerdrake.pm:4183
-#: printer/printerdrake.pm:4423 printer/printerdrake.pm:4451
-#: printer/printerdrake.pm:4528 printer/printerdrake.pm:4594
-#: printer/printerdrake.pm:4714 standalone/drakTermServ:414
-#: standalone/drakTermServ:484 standalone/drakTermServ:493
-#: standalone/drakTermServ:801 standalone/drakTermServ:808
-#: standalone/drakTermServ:834 standalone/drakTermServ:883
-#: standalone/drakTermServ:1134 standalone/drakTermServ:1169
-#: standalone/drakTermServ:1622 standalone/drakTermServ:1631
-#: standalone/drakTermServ:1639 standalone/drakTermServ:1644
-#: standalone/drakTermServ:1652 standalone/drakTermServ:1668
-#: standalone/drakTermServ:1688 standalone/drakauth:36
+#: printer/printerdrake.pm:2512 printer/printerdrake.pm:2947
+#: printer/printerdrake.pm:3231 printer/printerdrake.pm:3237
+#: printer/printerdrake.pm:3802 printer/printerdrake.pm:3806
+#: printer/printerdrake.pm:3810 printer/printerdrake.pm:4206
+#: printer/printerdrake.pm:4446 printer/printerdrake.pm:4474
+#: printer/printerdrake.pm:4551 printer/printerdrake.pm:4617
+#: printer/printerdrake.pm:4737 standalone/drakTermServ:422
+#: standalone/drakTermServ:492 standalone/drakTermServ:501
+#: standalone/drakTermServ:812 standalone/drakTermServ:819
+#: standalone/drakTermServ:845 standalone/drakTermServ:894
+#: standalone/drakTermServ:1146 standalone/drakTermServ:1181
+#: standalone/drakTermServ:1634 standalone/drakTermServ:1643
+#: standalone/drakTermServ:1651 standalone/drakTermServ:1656
+#: standalone/drakTermServ:1664 standalone/drakTermServ:1680
+#: standalone/drakTermServ:1700 standalone/drakauth:36
 #: standalone/drakbackup:510 standalone/drakbackup:624
 #: standalone/drakbackup:1104 standalone/drakbackup:1135
 #: standalone/drakbackup:1320 standalone/drakbackup:1652
@@ -258,9 +258,9 @@ msgstr "Oppdager og setter opp enheter.."
 #: standalone/finish-install:70 standalone/logdrake:171
 #: standalone/logdrake:439 standalone/logdrake:444 standalone/scannerdrake:59
 #: standalone/scannerdrake:202 standalone/scannerdrake:261
-#: standalone/scannerdrake:715 standalone/scannerdrake:726
-#: standalone/scannerdrake:865 standalone/scannerdrake:876
-#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
+#: standalone/scannerdrake:732 standalone/scannerdrake:743
+#: standalone/scannerdrake:882 standalone/scannerdrake:893
+#: standalone/scannerdrake:963 wizards.pm:95 wizards.pm:99 wizards.pm:121
 #, c-format
 msgid "Error"
 msgstr "Feil"
@@ -501,10 +501,10 @@ msgstr "Skreddersydd"
 
 #: Xconfig/main.pm:127 any.pm:730 diskdrake/dav.pm:26 help.pm:14
 #: install_steps_interactive.pm:1303 printer/printerdrake.pm:882
-#: printer/printerdrake.pm:899 printer/printerdrake.pm:4523
-#: printer/printerdrake.pm:4987 standalone/drakhosts:263
+#: printer/printerdrake.pm:899 printer/printerdrake.pm:4546
+#: printer/printerdrake.pm:5010 standalone/drakhosts:263
 #: standalone/drakroam:230 standalone/draksplash:93 standalone/logdrake:176
-#: standalone/net_applet:103 standalone/scannerdrake:477
+#: standalone/net_applet:103 standalone/scannerdrake:494
 #, c-format
 msgid "Quit"
 msgstr "Avslutt"
@@ -666,7 +666,7 @@ msgstr "Grafikk-kort: %s"
 #: Xconfig/resolution_and_depth.pm:375 interactive.pm:119 interactive.pm:436
 #: interactive/http.pm:103 interactive/http.pm:156 interactive/newt.pm:321
 #: interactive/stdio.pm:39 interactive/stdio.pm:142 interactive/stdio.pm:143
-#: standalone/drakTermServ:214 standalone/drakTermServ:535
+#: standalone/drakTermServ:222 standalone/drakTermServ:543
 #: standalone/drakbackup:1360 standalone/drakbackup:4106
 #: standalone/drakbackup:4166 standalone/drakbackup:4210
 #: standalone/drakbackup:4464 standalone/drakconnect:158
@@ -683,7 +683,7 @@ msgstr "Ok"
 #: install_steps_interactive.pm:811 interactive.pm:120 interactive.pm:437
 #: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
 #: interactive/stdio.pm:39 interactive/stdio.pm:142
-#: printer/printerdrake.pm:3859 standalone/drakautoinst:215
+#: printer/printerdrake.pm:3882 standalone/drakautoinst:215
 #: standalone/drakbackup:1360 standalone/drakbackup:4035
 #: standalone/drakbackup:4039 standalone/drakbackup:4094
 #: standalone/drakbackup:4464 standalone/drakconnect:157
@@ -698,7 +698,7 @@ msgstr "Avbryt"
 
 #: Xconfig/resolution_and_depth.pm:375 diskdrake/hd_gtk.pm:150
 #: install_steps_gtk.pm:232 install_steps_gtk.pm:617 interactive.pm:567
-#: interactive/gtk.pm:682 interactive/gtk.pm:684 standalone/drakTermServ:303
+#: interactive/gtk.pm:682 interactive/gtk.pm:684 standalone/drakTermServ:311
 #: standalone/drakbackup:4031 standalone/drakbug:105
 #: standalone/drakconnect:153 standalone/drakconnect:236
 #: standalone/drakfont:511 standalone/draknfs:206 standalone/drakperm:133
@@ -931,7 +931,7 @@ msgstr "Første sektor av root-partisjon"
 msgid "On Floppy"
 msgstr "På diskett"
 
-#: any.pm:236 help.pm:739 printer/printerdrake.pm:4180
+#: any.pm:236 help.pm:739 printer/printerdrake.pm:4203
 #, c-format
 msgid "Skip"
 msgstr "Hopp over"
@@ -1275,9 +1275,9 @@ msgstr ""
 #: any.pm:636 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
 #: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
 #: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4987
-#: standalone/drakbackup:2824 standalone/scannerdrake:668
-#: standalone/scannerdrake:818
+#: printer/printerdrake.pm:382 printer/printerdrake.pm:5010
+#: standalone/drakbackup:2824 standalone/scannerdrake:685
+#: standalone/scannerdrake:835
 #, c-format
 msgid "Done"
 msgstr "Ferdig"
@@ -1481,9 +1481,9 @@ msgstr "Du kan eksportere med NFS eller SMB. Velg den du ønsker å bruke."
 msgid "Launch userdrake"
 msgstr "Start userdrake"
 
-#: any.pm:1061 printer/printerdrake.pm:4062 printer/printerdrake.pm:4065
-#: printer/printerdrake.pm:4066 printer/printerdrake.pm:4067
-#: printer/printerdrake.pm:5305 standalone/drakTermServ:313
+#: any.pm:1061 printer/printerdrake.pm:4085 printer/printerdrake.pm:4088
+#: printer/printerdrake.pm:4089 printer/printerdrake.pm:4090
+#: printer/printerdrake.pm:5328 standalone/drakTermServ:321
 #: standalone/drakbackup:4228 standalone/drakbug:126 standalone/drakfont:499
 #: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85
 #: standalone/draknfs:210 standalone/net_monitor:117
@@ -1662,7 +1662,7 @@ msgstr "Domene"
 
 #: authentication.pm:124 diskdrake/dav.pm:63 help.pm:146
 #: printer/printerdrake.pm:75 share/compssUsers.pl:82
-#: standalone/drakTermServ:288
+#: standalone/drakTermServ:296
 #, c-format
 msgid "Server"
 msgstr "Tjener"
@@ -1792,7 +1792,7 @@ msgid "Can not use broadcast with no NIS domain"
 msgstr "Kan ikke bruke broadcast uten NIS-domene"
 
 #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:765
+#: bootloader.pm:767
 #, c-format
 msgid ""
 "Welcome to the operating system chooser!\n"
@@ -1807,42 +1807,42 @@ msgstr ""
 "vent for standardoppstart.\n"
 "\n"
 
-#: bootloader.pm:906
+#: bootloader.pm:909
 #, c-format
 msgid "LILO with graphical menu"
 msgstr "LILO med grafisk meny"
 
-#: bootloader.pm:907
+#: bootloader.pm:910
 #, c-format
 msgid "LILO with text menu"
 msgstr "LILO med tekstmeny"
 
-#: bootloader.pm:908
+#: bootloader.pm:911
 #, c-format
 msgid "GRUB with graphical menu"
 msgstr "GRUB med grafisk meny"
 
-#: bootloader.pm:909
+#: bootloader.pm:912
 #, c-format
 msgid "GRUB with text menu"
 msgstr "GRUB med tekstmeny"
 
-#: bootloader.pm:910
+#: bootloader.pm:913
 #, c-format
 msgid "Yaboot"
 msgstr "Yaboot"
 
-#: bootloader.pm:987
+#: bootloader.pm:990
 #, c-format
 msgid "not enough room in /boot"
 msgstr "ikke nok plass i /boot"
 
-#: bootloader.pm:1480
+#: bootloader.pm:1483
 #, c-format
 msgid "You can not install the bootloader on a %s partition\n"
 msgstr "Du kan ikke installere oppstartslasteren på en %s-partisjon\n"
 
-#: bootloader.pm:1520
+#: bootloader.pm:1523
 #, c-format
 msgid ""
 "Your bootloader configuration must be updated because partition has been "
@@ -1851,7 +1851,7 @@ msgstr ""
 "Ditt oppsett av oppstartslaster trenger å oppdateres pga. rekkefølgen på "
 "dine partisjoner har blitt endret"
 
-#: bootloader.pm:1533
+#: bootloader.pm:1536
 #, c-format
 msgid ""
 "The bootloader can not be installed correctly. You have to boot rescue and "
@@ -1860,7 +1860,7 @@ msgstr ""
 "Oppstartslasteren kan ikke bli installert korrekt. Du må gjøre nødoppstart "
 "og velge \"%s\""
 
-#: bootloader.pm:1534
+#: bootloader.pm:1537
 #, c-format
 msgid "Re-install Boot Loader"
 msgstr "Installer oppstartslaster på nytt"
@@ -3074,7 +3074,7 @@ msgstr "Søk nye tjenere"
 msgid "The package %s needs to be installed. Do you want to install it?"
 msgstr "Pakken %s må installeres. Vil du installere den?"
 
-#: do_pkgs.pm:19 do_pkgs.pm:39 do_pkgs.pm:52 printer/printerdrake.pm:3925
+#: do_pkgs.pm:19 do_pkgs.pm:39 do_pkgs.pm:52 printer/printerdrake.pm:3948
 #, c-format
 msgid "Could not install the %s package!"
 msgstr "Kunne ikke installere %s-pakken!"
@@ -3085,19 +3085,19 @@ msgid "Mandatory package %s is missing"
 msgstr "Obligatorisk pakke %s mangler"
 
 #: do_pkgs.pm:35 harddrake/sound.pm:275 install_steps_interactive.pm:1288
-#: keyboard.pm:388 network/ndiswrapper.pm:95 network/netconnect.pm:471
-#: printer/printerdrake.pm:1416 printer/printerdrake.pm:2494
-#: printer/printerdrake.pm:2609 printer/printerdrake.pm:2930
-#: printer/printerdrake.pm:2937 printer/printerdrake.pm:3924
-#: printer/printerdrake.pm:4188 printer/printerdrake.pm:4307
-#: printer/printerdrake.pm:5464 standalone/drakTermServ:346
-#: standalone/drakTermServ:1255 standalone/drakTermServ:1316
-#: standalone/drakTermServ:1985 standalone/drakbackup:509
+#: keyboard.pm:381 network/ndiswrapper.pm:95 network/netconnect.pm:471
+#: printer/printerdrake.pm:1416 printer/printerdrake.pm:2495
+#: printer/printerdrake.pm:2632 printer/printerdrake.pm:2953
+#: printer/printerdrake.pm:2960 printer/printerdrake.pm:3947
+#: printer/printerdrake.pm:4211 printer/printerdrake.pm:4330
+#: printer/printerdrake.pm:5487 standalone/drakTermServ:354
+#: standalone/drakTermServ:1267 standalone/drakTermServ:1328
+#: standalone/drakTermServ:2006 standalone/drakbackup:509
 #: standalone/drakbackup:608 standalone/drakboot:133 standalone/drakclock:224
 #: standalone/drakconnect:973 standalone/drakperm:380 standalone/drakperm:390
 #: standalone/drakups:27 standalone/harddrake2:511 standalone/harddrake2:527
 #: standalone/localedrake:43 standalone/scannerdrake:51
-#: standalone/scannerdrake:940
+#: standalone/scannerdrake:957
 #, c-format
 msgid "Warning"
 msgstr "Advarsel"
@@ -3997,7 +3997,7 @@ msgstr "Brukernavn"
 #: help.pm:51 help.pm:431 help.pm:681 install_interactive.pm:176
 #: install_steps_gtk.pm:237 install_steps_gtk.pm:682 interactive.pm:436
 #: interactive/newt.pm:321 network/thirdparty.pm:385
-#: printer/printerdrake.pm:3861 standalone/drakTermServ:404
+#: printer/printerdrake.pm:3884 standalone/drakTermServ:412
 #: standalone/drakbackup:4085 standalone/drakbackup:4179
 #: standalone/drakbackup:4196 standalone/drakbackup:4214 ugtk2.pm:490
 #, c-format
@@ -4976,8 +4976,8 @@ msgstr ""
 "ødelagte blokker på disken."
 
 #: help.pm:431 install_steps_gtk.pm:392 interactive.pm:437
-#: interactive/newt.pm:318 printer/printerdrake.pm:3859
-#: standalone/drakTermServ:383 standalone/drakbackup:4048
+#: interactive/newt.pm:318 printer/printerdrake.pm:3882
+#: standalone/drakTermServ:391 standalone/drakbackup:4048
 #: standalone/drakbackup:4084 standalone/drakbackup:4195
 #: standalone/drakbackup:4210 ugtk2.pm:488
 #, c-format
@@ -6092,8 +6092,8 @@ msgid ""
 "Do you have a supplementary installation medium to configure?"
 msgstr ""
 
-#: install_any.pm:422 printer/printerdrake.pm:3188
-#: printer/printerdrake.pm:3195 standalone/scannerdrake:182
+#: install_any.pm:422 printer/printerdrake.pm:3211
+#: printer/printerdrake.pm:3218 standalone/scannerdrake:182
 #: standalone/scannerdrake:190 standalone/scannerdrake:241
 #: standalone/scannerdrake:248
 #, c-format
@@ -7819,14 +7819,14 @@ msgstr ""
 msgid "Re-submit"
 msgstr "Re-submit"
 
-#: keyboard.pm:171 keyboard.pm:203
+#: keyboard.pm:171 keyboard.pm:202
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Czech (QWERTZ)"
 msgstr "Tsjekkisk (QWERTZ)"
 
-#: keyboard.pm:172 keyboard.pm:205
+#: keyboard.pm:172 keyboard.pm:204
 #, c-format
 msgid ""
 "_: keyboard\n"
@@ -7840,28 +7840,28 @@ msgid ""
 "Dvorak"
 msgstr "Dvorak"
 
-#: keyboard.pm:174 keyboard.pm:222
+#: keyboard.pm:174 keyboard.pm:217
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Spanish"
 msgstr "Spansk"
 
-#: keyboard.pm:175 keyboard.pm:223
+#: keyboard.pm:175 keyboard.pm:218
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Finnish"
 msgstr "Finsk"
 
-#: keyboard.pm:176 keyboard.pm:225
+#: keyboard.pm:176 keyboard.pm:220
 #, c-format
 msgid ""
 "_: keyboard\n"
 "French"
 msgstr "Fransk"
 
-#: keyboard.pm:177 keyboard.pm:269
+#: keyboard.pm:177 keyboard.pm:264
 #, c-format
 msgid ""
 "_: keyboard\n"
@@ -7875,828 +7875,828 @@ msgid ""
 "Polish"
 msgstr "Polsk"
 
-#: keyboard.pm:179 keyboard.pm:281
+#: keyboard.pm:179 keyboard.pm:275
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Russian"
 msgstr "Russisk"
 
-#: keyboard.pm:181 keyboard.pm:287
+#: keyboard.pm:180 keyboard.pm:281
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Swedish"
 msgstr "Svensk"
 
-#: keyboard.pm:182 keyboard.pm:317
+#: keyboard.pm:181 keyboard.pm:310
 #, c-format
 msgid "UK keyboard"
 msgstr "UK-tastatur"
 
-#: keyboard.pm:183 keyboard.pm:320
+#: keyboard.pm:182 keyboard.pm:313
 #, c-format
 msgid "US keyboard"
 msgstr "US-tastatur"
 
-#: keyboard.pm:185
+#: keyboard.pm:184
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Albanian"
 msgstr "Albansk"
 
-#: keyboard.pm:186
+#: keyboard.pm:185
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Armenian (old)"
 msgstr "Armensk (gammel)"
 
-#: keyboard.pm:187
+#: keyboard.pm:186
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Armenian (typewriter)"
 msgstr "Armensk (skrivemaskin)"
 
-#: keyboard.pm:188
+#: keyboard.pm:187
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Armenian (phonetic)"
 msgstr "Armensk (fonétisk)"
 
-#: keyboard.pm:189
+#: keyboard.pm:188
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Arabic"
 msgstr "Arabisk"
 
-#: keyboard.pm:190
+#: keyboard.pm:189
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Azerbaidjani (latin)"
 msgstr "Azerbaidjansk (latin)"
 
-#: keyboard.pm:191
+#: keyboard.pm:190
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Belgian"
 msgstr "Belgisk"
 
-#: keyboard.pm:192
+#: keyboard.pm:191
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Bengali (Inscript-layout)"
 msgstr "Bengalsk (Inscript oppsett)"
 
-#: keyboard.pm:193
+#: keyboard.pm:192
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Bengali (Probhat)"
 msgstr "Bengalsk (Probhat oppsett)"
 
-#: keyboard.pm:194
+#: keyboard.pm:193
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Bulgarian (phonetic)"
 msgstr "Bulgarsk (fonétisk)"
 
-#: keyboard.pm:195
+#: keyboard.pm:194
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Bulgarian (BDS)"
 msgstr "Bulgarsk (BDS)"
 
-#: keyboard.pm:196
+#: keyboard.pm:195
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Brazilian (ABNT-2)"
 msgstr "Brasiliansk (ABNT-2)"
 
-#: keyboard.pm:197
+#: keyboard.pm:196
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Bosnian"
 msgstr "Bosnisk"
 
-#: keyboard.pm:198
+#: keyboard.pm:197
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Belarusian"
 msgstr "Belarusian"
 
-#: keyboard.pm:199
+#: keyboard.pm:198
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Swiss (German layout)"
 msgstr "Sveisisk (tysk oppsett)"
 
-#: keyboard.pm:200
+#: keyboard.pm:199
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Swiss (French layout)"
 msgstr "Sveitsisk (fransk oppsett)"
 
-#: keyboard.pm:202
+#: keyboard.pm:201
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Cherokee syllabics"
 msgstr "Cherokee syllabics"
 
-#: keyboard.pm:204
+#: keyboard.pm:203
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Czech (QWERTY)"
 msgstr "Tsjekkisk (QWERTY)"
 
-#: keyboard.pm:206
+#: keyboard.pm:205
 #, c-format
 msgid ""
 "_: keyboard\n"
 "German (no dead keys)"
 msgstr "Tysk (ingen døde taster)"
 
-#: keyboard.pm:207
+#: keyboard.pm:206
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Devanagari"
 msgstr "Devanagari"
 
-#: keyboard.pm:208
+#: keyboard.pm:207
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Danish"
 msgstr "Dansk"
 
-#: keyboard.pm:209
+#: keyboard.pm:208
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Dvorak (US)"
 msgstr "Dvorak (US)"
 
-#: keyboard.pm:211
+#: keyboard.pm:209
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Dvorak (Esperanto)"
 msgstr "Dvorak (Esperanto)"
 
-#: keyboard.pm:213
+#: keyboard.pm:210
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Dvorak (French)"
 msgstr "Dvorak (Fransk)"
 
-#: keyboard.pm:215
+#: keyboard.pm:211
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Dvorak (UK)"
 msgstr "Dvorak (Britisk)"
 
-#: keyboard.pm:216
+#: keyboard.pm:212
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Dvorak (Norwegian)"
 msgstr "Dvorak (Norsk)"
 
-#: keyboard.pm:218
+#: keyboard.pm:213
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Dvorak (Polish)"
 msgstr "Dvorak (Polsk)"
 
-#: keyboard.pm:219
+#: keyboard.pm:214
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Dvorak (Swedish)"
 msgstr "Dvorak (Svensk)"
 
-#: keyboard.pm:220
+#: keyboard.pm:215
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Dzongkha/Tibetan"
 msgstr "Dzongkha/Tibetan"
 
-#: keyboard.pm:221
+#: keyboard.pm:216
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Estonian"
 msgstr "Estlandsk"
 
-#: keyboard.pm:224
+#: keyboard.pm:219
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Faroese"
 msgstr "Faroese"
 
-#: keyboard.pm:226
+#: keyboard.pm:221
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Georgian (\"Russian\" layout)"
 msgstr "Georgisk (\"Russisk\" oppsett)"
 
-#: keyboard.pm:227
+#: keyboard.pm:222
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Georgian (\"Latin\" layout)"
 msgstr "Georgisk (\"Latinsk\" oppsett)"
 
-#: keyboard.pm:228
+#: keyboard.pm:223
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Greek"
 msgstr "Gresk"
 
-#: keyboard.pm:229
+#: keyboard.pm:224
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Greek (polytonic)"
 msgstr "Gresk (polytonisk)"
 
-#: keyboard.pm:230
+#: keyboard.pm:225
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Gujarati"
 msgstr "Gujarati"
 
-#: keyboard.pm:231
+#: keyboard.pm:226
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Gurmukhi"
 msgstr "Gurmukhi"
 
-#: keyboard.pm:232
+#: keyboard.pm:227
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Croatian"
 msgstr "Kroatisk"
 
-#: keyboard.pm:233
+#: keyboard.pm:228
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Hungarian"
 msgstr "Ungarsk"
 
-#: keyboard.pm:234
+#: keyboard.pm:229
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Irish"
 msgstr "Irsk"
 
-#: keyboard.pm:235
+#: keyboard.pm:230
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Israeli"
 msgstr "Israelsk"
 
-#: keyboard.pm:236
+#: keyboard.pm:231
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Israeli (phonetic)"
 msgstr "Israelsk (Phonetic)"
 
-#: keyboard.pm:237
+#: keyboard.pm:232
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Iranian"
 msgstr "Iransk"
 
-#: keyboard.pm:238
+#: keyboard.pm:233
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Icelandic"
 msgstr "Islansk"
 
-#: keyboard.pm:239
+#: keyboard.pm:234
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Italian"
 msgstr "Italiensk"
 
-#: keyboard.pm:240
+#: keyboard.pm:235
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Inuktitut"
 msgstr "Inuktitut"
 
-#: keyboard.pm:244
+#: keyboard.pm:239
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Japanese 106 keys"
 msgstr "Japansk 106 taster"
 
-#: keyboard.pm:245
+#: keyboard.pm:240
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Kannada"
 msgstr "Kannada"
 
-#: keyboard.pm:248
+#: keyboard.pm:243
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Korean"
 msgstr "Koreansk tastatur"
 
-#: keyboard.pm:250
+#: keyboard.pm:245
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Kurdish (arabic script)"
 msgstr "Kurdisk (arabisk skript)"
 
-#: keyboard.pm:251
+#: keyboard.pm:246
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Kyrgyz"
 msgstr "Kyrgyz-tastatur"
 
-#: keyboard.pm:252
+#: keyboard.pm:247
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Latin American"
 msgstr "Latinamerikansk"
 
-#: keyboard.pm:254
+#: keyboard.pm:249
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Laotian"
 msgstr "Laot"
 
-#: keyboard.pm:255
+#: keyboard.pm:250
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Lithuanian AZERTY (old)"
 msgstr "Liauisk AZERTY (gammel)"
 
-#: keyboard.pm:257
+#: keyboard.pm:252
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Lithuanian AZERTY (new)"
 msgstr "Liauisk AZERTY (ny)"
 
-#: keyboard.pm:258
+#: keyboard.pm:253
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Lithuanian \"number row\" QWERTY"
 msgstr "Litauisk \"nummer-rekke\" QWERTY"
 
-#: keyboard.pm:259
+#: keyboard.pm:254
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Lithuanian \"phonetic\" QWERTY"
 msgstr "Litauisk \"fonétisk\" QWERTY"
 
-#: keyboard.pm:260
+#: keyboard.pm:255
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Latvian"
 msgstr "Latvisk"
 
-#: keyboard.pm:261
+#: keyboard.pm:256
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Malayalam"
 msgstr "Malaysisk"
 
-#: keyboard.pm:263
+#: keyboard.pm:258
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Macedonian"
 msgstr "Makedonsk"
 
-#: keyboard.pm:264
+#: keyboard.pm:259
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Myanmar (Burmese)"
 msgstr "Myanmar (Burmesisk)"
 
-#: keyboard.pm:265
+#: keyboard.pm:260
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Mongolian (cyrillic)"
 msgstr "Mongolsk (cyrillic)"
 
-#: keyboard.pm:266
+#: keyboard.pm:261
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Maltese (UK)"
 msgstr "Maltesisk (UK)"
 
-#: keyboard.pm:267
+#: keyboard.pm:262
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Maltese (US)"
 msgstr "Maltesisk (US)"
 
-#: keyboard.pm:268
+#: keyboard.pm:263
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Dutch"
 msgstr "Nederlandsk"
 
-#: keyboard.pm:270
+#: keyboard.pm:265
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Oriya"
 msgstr "Oriya"
 
-#: keyboard.pm:271
+#: keyboard.pm:266
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Polish (qwerty layout)"
 msgstr "Polsk (qwerty oppsett)"
 
-#: keyboard.pm:272
+#: keyboard.pm:267
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Polish (qwertz layout)"
 msgstr "Polsk (qwertz oppsett)"
 
-#: keyboard.pm:274
+#: keyboard.pm:269
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Pashto"
 msgstr "Pashto"
 
-#: keyboard.pm:275
+#: keyboard.pm:270
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Portuguese"
 msgstr "Portugisisk"
 
-#: keyboard.pm:277
+#: keyboard.pm:272
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Canadian (Quebec)"
 msgstr "Kanadisk (Quebec)"
 
-#: keyboard.pm:279
+#: keyboard.pm:273
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Romanian (qwertz)"
 msgstr "Romansk (qwertz)"
 
-#: keyboard.pm:280
+#: keyboard.pm:274
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Romanian (qwerty)"
 msgstr "Romansk (qwerty)"
 
-#: keyboard.pm:282
+#: keyboard.pm:276
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Russian (phonetic)"
 msgstr "Russisk (Phonetic)"
 
-#: keyboard.pm:283
+#: keyboard.pm:277
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Saami (norwegian)"
 msgstr "Samisk (norsk)"
 
-#: keyboard.pm:284
+#: keyboard.pm:278
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Saami (swedish/finnish)"
 msgstr "Samisk (svensk/finsk)"
 
-#: keyboard.pm:286
+#: keyboard.pm:280
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Sindhi"
 msgstr "Sindhi"
 
-#: keyboard.pm:288
+#: keyboard.pm:282
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Slovenian"
 msgstr "Slovensk"
 
-#: keyboard.pm:290
+#: keyboard.pm:284
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Sinhala"
 msgstr "Sinhala"
 
-#: keyboard.pm:291
+#: keyboard.pm:285
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Slovakian (QWERTZ)"
 msgstr "Slovakisk (QWERTZ)"
 
-#: keyboard.pm:292
+#: keyboard.pm:286
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Slovakian (QWERTY)"
 msgstr "Slovakisk (QWERTY)"
 
-#: keyboard.pm:294
+#: keyboard.pm:288
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Serbian (cyrillic)"
 msgstr "Serbisk (cyrillic)"
 
-#: keyboard.pm:295
+#: keyboard.pm:289
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Syriac"
 msgstr "Syrisk"
 
-#: keyboard.pm:296
+#: keyboard.pm:290
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Syriac (phonetic)"
 msgstr "Syrisk (fonétisk)"
 
-#: keyboard.pm:297
+#: keyboard.pm:291
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Telugu"
 msgstr "Telugu"
 
-#: keyboard.pm:299
+#: keyboard.pm:293
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Tamil (ISCII-layout)"
 msgstr "Tamilsk (ISCII-oppsett)"
 
-#: keyboard.pm:300
+#: keyboard.pm:294
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Tamil (Typewriter-layout)"
 msgstr "Tamilsk (skrivemaskin-oppsett)"
 
-#: keyboard.pm:301
+#: keyboard.pm:295
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Thai (Kedmanee)"
 msgstr "Thai (Kedmanee)"
 
-#: keyboard.pm:302
+#: keyboard.pm:296
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Thai (TIS-820)"
 msgstr "Thai (TIS-820)"
 
-#: keyboard.pm:304
+#: keyboard.pm:298
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Thai (Pattachote)"
 msgstr "Thai (Pattachote)"
 
-#: keyboard.pm:307
+#: keyboard.pm:300
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Tifinagh (moroccan layout) (+latin/arabic)"
 msgstr "Tifinagh (marokansk oppsett)(+latinsk/arabisk)"
 
-#: keyboard.pm:308
+#: keyboard.pm:301
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Tifinagh (phonetic) (+latin/arabic)"
 msgstr "Tifinagh (fonetisk) (+latinsk/arabisk)"
 
-#: keyboard.pm:310
+#: keyboard.pm:303
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Tajik"
 msgstr "Tajik-tastatur"
 
-#: keyboard.pm:312
+#: keyboard.pm:305
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Turkmen"
 msgstr "Turkmensk"
 
-#: keyboard.pm:313
+#: keyboard.pm:306
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Turkish (traditional \"F\" model)"
 msgstr "Tyrkisk (tradisjonell \"F\" modell)"
 
-#: keyboard.pm:314
+#: keyboard.pm:307
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Turkish (modern \"Q\" model)"
 msgstr "Tyrkisk (moderne \"Q\" modell)"
 
-#: keyboard.pm:316
+#: keyboard.pm:309
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Ukrainian"
 msgstr "Ukrainsk"
 
-#: keyboard.pm:319
+#: keyboard.pm:312
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Urdu keyboard"
 msgstr "Urdu-tastatur"
 
-#: keyboard.pm:321
+#: keyboard.pm:314
 #, c-format
 msgid "US keyboard (international)"
 msgstr "US-tastatur (internasjonalt)"
 
-#: keyboard.pm:322
+#: keyboard.pm:315
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Uzbek (cyrillic)"
 msgstr "Usbekistansk (cyrillic)"
 
-#: keyboard.pm:324
+#: keyboard.pm:317
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Vietnamese \"numeric row\" QWERTY"
 msgstr "Vietnamesisk \"nummer-rekke\" QWERTY"
 
-#: keyboard.pm:325
+#: keyboard.pm:318
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Yugoslavian (latin)"
 msgstr "Jugoslavisk (latin)"
 
-#: keyboard.pm:332
+#: keyboard.pm:325
 #, c-format
 msgid "Right Alt key"
 msgstr "Høyre Alt-tast"
 
-#: keyboard.pm:333
+#: keyboard.pm:326
 #, c-format
 msgid "Both Shift keys simultaneously"
 msgstr "Begge Shift-taster samtidig"
 
-#: keyboard.pm:334
+#: keyboard.pm:327
 #, c-format
 msgid "Control and Shift keys simultaneously"
 msgstr "Control- og Shift-taster samtidig"
 
-#: keyboard.pm:335
+#: keyboard.pm:328
 #, c-format
 msgid "CapsLock key"
 msgstr "CapsLock-tast"
 
-#: keyboard.pm:336
+#: keyboard.pm:329
 #, c-format
 msgid "Shift and CapsLock keys simultaneously"
 msgstr "Shift- og CapsLock-taster samtidig"
 
-#: keyboard.pm:337
+#: keyboard.pm:330
 #, c-format
 msgid "Ctrl and Alt keys simultaneously"
 msgstr "Ctrl- og Alt-taster samtidig"
 
-#: keyboard.pm:338
+#: keyboard.pm:331
 #, c-format
 msgid "Alt and Shift keys simultaneously"
 msgstr "Alt- og Shift-taster samtidig"
 
-#: keyboard.pm:339
+#: keyboard.pm:332
 #, c-format
 msgid "\"Menu\" key"
 msgstr "\" Menu\"-tast"
 
-#: keyboard.pm:340
+#: keyboard.pm:333
 #, c-format
 msgid "Left \"Windows\" key"
 msgstr "Venstre \"Windows\" tast"
 
-#: keyboard.pm:341
+#: keyboard.pm:334
 #, c-format
 msgid "Right \"Windows\" key"
 msgstr "Høyre \"Windows\"-tast"
 
-#: keyboard.pm:342
+#: keyboard.pm:335
 #, c-format
 msgid "Both Control keys simultaneously"
 msgstr "Begge Control-taster samtidig"
 
-#: keyboard.pm:343
+#: keyboard.pm:336
 #, c-format
 msgid "Both Alt keys simultaneously"
 msgstr "Begge Alt-taster samtidig"
 
-#: keyboard.pm:344
+#: keyboard.pm:337
 #, c-format
 msgid "Left Shift key"
 msgstr "Venstre \"shift\"-tast"
 
-#: keyboard.pm:345
+#: keyboard.pm:338
 #, c-format
 msgid "Right Shift key"
 msgstr "Høyre Shift-tast"
 
-#: keyboard.pm:346
+#: keyboard.pm:339
 #, c-format
 msgid "Left Alt key"
 msgstr "Venstre Alt-tast"
 
-#: keyboard.pm:347
+#: keyboard.pm:340
 #, c-format
 msgid "Left Control key"
 msgstr "Venstre Control-tast"
 
-#: keyboard.pm:348
+#: keyboard.pm:341
 #, c-format
 msgid "Right Control key"
 msgstr "Høyre Control-tast"
 
-#: keyboard.pm:384
+#: keyboard.pm:377
 #, c-format
 msgid ""
 "Here you can choose the key or key combination that will \n"
@@ -8707,7 +8707,7 @@ msgstr ""
 "å bytte mellom forskjellige tastaturoppsett.\n"
 "(for eksempel latin og ikke-latin)"
 
-#: keyboard.pm:389
+#: keyboard.pm:382
 #, c-format
 msgid ""
 "This setting will be activated after the installation.\n"
@@ -11100,8 +11100,8 @@ msgstr "Netmaske bør være i format 255.255.224.0"
 msgid "Warning: IP address %s is usually reserved!"
 msgstr "Advarsel : IP-adresse %s er vanligvis reservert !"
 
-#: network/netconnect.pm:978 standalone/drakTermServ:1906
-#: standalone/drakTermServ:1907 standalone/drakTermServ:1908
+#: network/netconnect.pm:978 standalone/drakTermServ:1927
+#: standalone/drakTermServ:1928 standalone/drakTermServ:1929
 #, c-format
 msgid "%s already in use\n"
 msgstr "%s er allerede i bruk\n"
@@ -11813,7 +11813,7 @@ msgid "Firmware copy failed, file %s not found"
 msgstr "Firmwarekopiering feilet, filen %s ble ikke funnet"
 
 #: network/thirdparty.pm:424 standalone/drakautoinst:250
-#: standalone/drakvpn:888 standalone/scannerdrake:405
+#: standalone/drakvpn:888 standalone/scannerdrake:422
 #, c-format
 msgid "Congratulations!"
 msgstr "Gratulerer!"
@@ -11947,9 +11947,9 @@ msgstr "Satt opp på andre maskiner"
 msgid "On CUPS server \"%s\""
 msgstr "På CUPS-tjener \"%s\""
 
-#: printer/cups.pm:119 printer/printerdrake.pm:4886
-#: printer/printerdrake.pm:4896 printer/printerdrake.pm:5055
-#: printer/printerdrake.pm:5066 printer/printerdrake.pm:5280
+#: printer/cups.pm:119 printer/printerdrake.pm:4909
+#: printer/printerdrake.pm:4919 printer/printerdrake.pm:5078
+#: printer/printerdrake.pm:5089 printer/printerdrake.pm:5303
 #, c-format
 msgid " (Default)"
 msgstr " (Standard)"
@@ -12001,9 +12001,9 @@ msgstr "Fjern-CUPS"
 
 #: printer/detect.pm:168 printer/detect.pm:263 printer/detect.pm:498
 #: printer/detect.pm:571 printer/main.pm:330 printer/main.pm:692
-#: printer/main.pm:1810 printer/printerdrake.pm:960
-#: printer/printerdrake.pm:1120 printer/printerdrake.pm:2447
-#: printer/printerdrake.pm:3981
+#: printer/main.pm:1815 printer/printerdrake.pm:960
+#: printer/printerdrake.pm:1120 printer/printerdrake.pm:2448
+#: printer/printerdrake.pm:4004
 #, c-format
 msgid "Unknown model"
 msgstr "Ukjent modell"
@@ -12251,7 +12251,7 @@ msgid "URI: %s"
 msgstr "URI: %s"
 
 #: printer/main.pm:689 printer/printerdrake.pm:1047
-#: printer/printerdrake.pm:3119
+#: printer/printerdrake.pm:3142
 #, c-format
 msgid "Raw printer (No driver)"
 msgstr "Rå skriver (ingen driver)"
@@ -12282,12 +12282,12 @@ msgstr "Vertsnavn %s"
 msgid "%s (Port %s)"
 msgstr "%s (Port %s)"
 
-#: printer/main.pm:1939 printer/main.pm:2097
+#: printer/main.pm:1945 printer/main.pm:2100
 #, c-format
 msgid "user-supplied"
 msgstr ""
 
-#: printer/main.pm:1943 printer/main.pm:2101
+#: printer/main.pm:1949 printer/main.pm:2104
 #, c-format
 msgid "NEW"
 msgstr ""
@@ -12336,7 +12336,7 @@ msgstr ""
 "tilgjengelige på denne maskinen."
 
 #: printer/printerdrake.pm:72 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4519
+#: printer/printerdrake.pm:4542
 #, c-format
 msgid "Remote CUPS server and no local CUPS daemon"
 msgstr "Ekstern CUPS-tjener og ingen lokal CUPS-tjeneste"
@@ -12386,8 +12386,8 @@ msgstr "Printerdeling på verter/nettverk"
 msgid "Custom configuration"
 msgstr "Egendefinert oppsett"
 
-#: printer/printerdrake.pm:101 standalone/scannerdrake:593
-#: standalone/scannerdrake:610
+#: printer/printerdrake.pm:101 standalone/scannerdrake:610
+#: standalone/scannerdrake:627
 #, c-format
 msgid "No remote machines"
 msgstr "Ingen fjern-maskiner"
@@ -12619,8 +12619,8 @@ msgstr "Port"
 msgid "On, Name or IP of remote server:"
 msgstr "På, Navn eller IP av ekstern tjener."
 
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4528
-#: printer/printerdrake.pm:4594
+#: printer/printerdrake.pm:514 printer/printerdrake.pm:4551
+#: printer/printerdrake.pm:4617
 #, c-format
 msgid "CUPS server name or IP address missing."
 msgstr "CUPS-tjenernavn eller IP-adresse mangler."
@@ -12630,29 +12630,30 @@ msgstr "CUPS-tjenernavn eller IP-adresse mangler."
 #: printer/printerdrake.pm:901 printer/printerdrake.pm:927
 #: printer/printerdrake.pm:1023 printer/printerdrake.pm:1065
 #: printer/printerdrake.pm:1075 printer/printerdrake.pm:1110
-#: printer/printerdrake.pm:2220 printer/printerdrake.pm:2489
-#: printer/printerdrake.pm:2523 printer/printerdrake.pm:2598
-#: printer/printerdrake.pm:2640 printer/printerdrake.pm:2677
-#: printer/printerdrake.pm:2688 printer/printerdrake.pm:2961
-#: printer/printerdrake.pm:2966 printer/printerdrake.pm:3114
-#: printer/printerdrake.pm:3225 printer/printerdrake.pm:3839
-#: printer/printerdrake.pm:3906 printer/printerdrake.pm:3955
-#: printer/printerdrake.pm:3958 printer/printerdrake.pm:4068
-#: printer/printerdrake.pm:4126 printer/printerdrake.pm:4198
-#: printer/printerdrake.pm:4219 printer/printerdrake.pm:4229
-#: printer/printerdrake.pm:4319 printer/printerdrake.pm:4414
-#: printer/printerdrake.pm:4420 printer/printerdrake.pm:4448
-#: printer/printerdrake.pm:4555 printer/printerdrake.pm:4664
-#: printer/printerdrake.pm:4684 printer/printerdrake.pm:4693
-#: printer/printerdrake.pm:4708 printer/printerdrake.pm:4909
-#: printer/printerdrake.pm:5384 printer/printerdrake.pm:5467
+#: printer/printerdrake.pm:2220 printer/printerdrake.pm:2490
+#: printer/printerdrake.pm:2524 printer/printerdrake.pm:2575
+#: printer/printerdrake.pm:2582 printer/printerdrake.pm:2621
+#: printer/printerdrake.pm:2663 printer/printerdrake.pm:2700
+#: printer/printerdrake.pm:2711 printer/printerdrake.pm:2984
+#: printer/printerdrake.pm:2989 printer/printerdrake.pm:3137
+#: printer/printerdrake.pm:3248 printer/printerdrake.pm:3862
+#: printer/printerdrake.pm:3929 printer/printerdrake.pm:3978
+#: printer/printerdrake.pm:3981 printer/printerdrake.pm:4091
+#: printer/printerdrake.pm:4149 printer/printerdrake.pm:4221
+#: printer/printerdrake.pm:4242 printer/printerdrake.pm:4252
+#: printer/printerdrake.pm:4342 printer/printerdrake.pm:4437
+#: printer/printerdrake.pm:4443 printer/printerdrake.pm:4471
+#: printer/printerdrake.pm:4578 printer/printerdrake.pm:4687
+#: printer/printerdrake.pm:4707 printer/printerdrake.pm:4716
+#: printer/printerdrake.pm:4731 printer/printerdrake.pm:4932
+#: printer/printerdrake.pm:5407 printer/printerdrake.pm:5490
 #: standalone/printerdrake:75 standalone/printerdrake:590
 #, c-format
 msgid "Printerdrake"
 msgstr "Printerdrake"
 
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4127
-#: printer/printerdrake.pm:4665
+#: printer/printerdrake.pm:567 printer/printerdrake.pm:4150
+#: printer/printerdrake.pm:4688
 #, c-format
 msgid "Reading printer data..."
 msgstr "Leser skriverdata: ..."
@@ -12787,7 +12788,7 @@ msgstr ""
 "Skrivere på fjern-CUPS-tjenere trenger du ikke å sette opp her; disse "
 "skriverene vil bli oppdaget automatisk."
 
-#: printer/printerdrake.pm:751 printer/printerdrake.pm:4911
+#: printer/printerdrake.pm:751 printer/printerdrake.pm:4934
 #, c-format
 msgid ""
 "\n"
@@ -13028,12 +13029,12 @@ msgstr " på "
 msgid ")"
 msgstr ")"
 
-#: printer/printerdrake.pm:1056 printer/printerdrake.pm:3126
+#: printer/printerdrake.pm:1056 printer/printerdrake.pm:3149
 #, c-format
 msgid "Printer model selection"
 msgstr "Skrivervalg"
 
-#: printer/printerdrake.pm:1057 printer/printerdrake.pm:3127
+#: printer/printerdrake.pm:1057 printer/printerdrake.pm:3150
 #, c-format
 msgid "Which printer model do you have?"
 msgstr "Hva slags type skriver har du?"
@@ -13051,7 +13052,7 @@ msgstr ""
 "Printerdrake kunne ikke avgjøre hva slags modell skriveren \"%s\" er. Velg "
 "den korrekte modellen fra lista. "
 
-#: printer/printerdrake.pm:1061 printer/printerdrake.pm:3132
+#: printer/printerdrake.pm:1061 printer/printerdrake.pm:3155
 #, c-format
 msgid ""
 "If your printer is not listed, choose a compatible (see printer manual) or a "
@@ -13060,7 +13061,7 @@ msgstr ""
 "Hvis din skriver ikke finnes i listen velg en kompatibel (se i "
 "skrivermanualen) eller en lignende."
 
-#: printer/printerdrake.pm:1076 printer/printerdrake.pm:4685
+#: printer/printerdrake.pm:1076 printer/printerdrake.pm:4708
 #, c-format
 msgid "Configuring printer \"%s\"..."
 msgstr "Setter opp skriver \"%s\"..."
@@ -13083,7 +13084,7 @@ msgstr ""
 "Du kan skru den tilbake på igjen ved å velge \"%s\" -> \"%s\" i "
 "Printerdrake's hovedmeny. "
 
-#: printer/printerdrake.pm:1112 printer/printerdrake.pm:4961
+#: printer/printerdrake.pm:1112 printer/printerdrake.pm:4984
 #, c-format
 msgid "Configure Auto Administration"
 msgstr "Sett opp automatisk administrasjon"
@@ -13101,8 +13102,8 @@ msgstr ""
 
 #: printer/printerdrake.pm:1261 printer/printerdrake.pm:1273
 #: printer/printerdrake.pm:1380 printer/printerdrake.pm:2401
-#: printer/printerdrake.pm:2459 printer/printerdrake.pm:2543
-#: printer/printerdrake.pm:4928 printer/printerdrake.pm:5115
+#: printer/printerdrake.pm:2460 printer/printerdrake.pm:2556
+#: printer/printerdrake.pm:4951 printer/printerdrake.pm:5138
 #, c-format
 msgid "Add a new printer"
 msgstr "Legg til en ny skriver"
@@ -13310,8 +13311,8 @@ msgstr ""
 #: printer/printerdrake.pm:1934 printer/printerdrake.pm:2010
 #: printer/printerdrake.pm:2177 printer/printerdrake.pm:2268
 #: printer/printerdrake.pm:2277 printer/printerdrake.pm:2286
-#: printer/printerdrake.pm:2297 printer/printerdrake.pm:2495
-#: printer/printerdrake.pm:2610
+#: printer/printerdrake.pm:2297 printer/printerdrake.pm:2496
+#: printer/printerdrake.pm:2633
 #, c-format
 msgid "Could not install the %s packages!"
 msgstr "Kunne ikke installere %s-pakkene!"
@@ -13549,10 +13550,10 @@ msgid "Remote printer name missing!"
 msgstr "Det eksterne skrivernavnet mangler!"
 
 #: printer/printerdrake.pm:1719 printer/printerdrake.pm:2195
-#: printer/printerdrake.pm:2318 standalone/drakTermServ:467
-#: standalone/drakTermServ:796 standalone/drakTermServ:812
-#: standalone/drakTermServ:1641 standalone/drakTermServ:1650
-#: standalone/drakTermServ:1664 standalone/drakbackup:511
+#: printer/printerdrake.pm:2318 standalone/drakTermServ:475
+#: standalone/drakTermServ:807 standalone/drakTermServ:823
+#: standalone/drakTermServ:1653 standalone/drakTermServ:1662
+#: standalone/drakTermServ:1676 standalone/drakbackup:511
 #: standalone/drakbackup:617 standalone/drakbackup:652
 #: standalone/drakbackup:753 standalone/draknfs:203
 #: standalone/draksambashare:627 standalone/draksambashare:794
@@ -13934,8 +13935,8 @@ msgstr "Rediger"
 msgid "and choosing \"%s\"."
 msgstr ""
 
-#: printer/printerdrake.pm:2421 printer/printerdrake.pm:5311
-#: printer/printerdrake.pm:5371
+#: printer/printerdrake.pm:2421 printer/printerdrake.pm:5334
+#: printer/printerdrake.pm:5394
 #, c-format
 msgid "Printer connection type"
 msgstr "Skrivertilkoblingstype"
@@ -13945,22 +13946,18 @@ msgstr "Skrivertilkoblingstype"
 msgid "What do you want to do?"
 msgstr "Hva ønsker du å gjøre?"
 
-#: printer/printerdrake.pm:2424 printer/printerdrake.pm:2427
+#: printer/printerdrake.pm:2424 printer/printerdrake.pm:2428
 #, c-format
 msgid "Set up with HPLIP"
 msgstr ""
 
-#: printer/printerdrake.pm:2425 printer/printerdrake.pm:2429
+#: printer/printerdrake.pm:2425 printer/printerdrake.pm:2427
+#: printer/printerdrake.pm:2430
 #, c-format
 msgid "Set up without HPLIP"
 msgstr ""
 
-#: printer/printerdrake.pm:2426
-#, fuzzy, c-format
-msgid "Cancel setup"
-msgstr "Avbryt"
-
-#: printer/printerdrake.pm:2460
+#: printer/printerdrake.pm:2461
 #, c-format
 msgid ""
 "On many HP printers there are special functions available, maintenance (ink "
@@ -13973,7 +13970,7 @@ msgstr ""
 "for gamle, skanning på multifunksjonsenheter og minnekorttilgang på skrivere "
 "med kortlesere."
 
-#: printer/printerdrake.pm:2462
+#: printer/printerdrake.pm:2463
 #, fuzzy, c-format
 msgid ""
 "To access these extra functions on HP printers they must be set up with "
@@ -13982,89 +13979,105 @@ msgstr ""
 "For å få tilgang til disse ekstra funksjonene på din HP skriver må den bli "
 "satt opp med rett programvare: "
 
-#: printer/printerdrake.pm:2464
+#: printer/printerdrake.pm:2465
 #, fuzzy, c-format
 msgid "Do you want to use HPLIP (choose \"No\" for non-HP printers)? "
 msgstr "Hva er ditt valg (velg \"Ingen\" for ikke-HP-skrivere)? "
 
-#: printer/printerdrake.pm:2490
+#: printer/printerdrake.pm:2491
 #, c-format
 msgid "Installing %s package..."
 msgstr "Installerer %s-pakker..."
 
-#: printer/printerdrake.pm:2490 printer/printerdrake.pm:2496
-#: printer/printerdrake.pm:2524
+#: printer/printerdrake.pm:2491 printer/printerdrake.pm:2497
+#: printer/printerdrake.pm:2525
 #, c-format
 msgid "HPLIP"
 msgstr "HPLIP"
 
-#: printer/printerdrake.pm:2497
+#: printer/printerdrake.pm:2498
 #, c-format
 msgid "Only printing will be possible on the %s."
 msgstr "Bare utskrift vil være mulig på %s."
 
-#: printer/printerdrake.pm:2512
+#: printer/printerdrake.pm:2513
 #, c-format
 msgid "Could not remove your old HPOJ configuration file %s for your %s! "
 msgstr "Kunne ikke opprette din gamle HPOJ-oppsettsfil %s for din %s! "
 
-#: printer/printerdrake.pm:2514
+#: printer/printerdrake.pm:2515
 #, c-format
 msgid "Please remove the file manually and restart HPOJ."
 msgstr "Fjern fila manuelt og start HPOJ på nytt."
 
-#: printer/printerdrake.pm:2524
+#: printer/printerdrake.pm:2525
 #, c-format
 msgid "Checking device and configuring %s..."
 msgstr "Sjekker enhet og setter opp %s"
 
-#: printer/printerdrake.pm:2544
+#: printer/printerdrake.pm:2557
 #, c-format
 msgid "Which printer do you want to set up with HPLIP?"
 msgstr "Hvilken skriver ønsker du å sette opp med HPLIP?"
 
-#: printer/printerdrake.pm:2599
+#: printer/printerdrake.pm:2576
+#, c-format
+msgid "HPLIP was not able to communicate with the chosen printer!"
+msgstr ""
+
+#: printer/printerdrake.pm:2577 printer/printerdrake.pm:2584
+#, fuzzy, c-format
+msgid "Setting up the printer without HPLIP..."
+msgstr "Setter opp kjernemoduler..."
+
+#: printer/printerdrake.pm:2583
+#, c-format
+msgid ""
+"HPLIP did not find any local printers (Parallel, USB) which it supports!"
+msgstr ""
+
+#: printer/printerdrake.pm:2622
 #, c-format
 msgid "Installing SANE packages..."
 msgstr "Installerer SANE-pakker..."
 
-#: printer/printerdrake.pm:2612
+#: printer/printerdrake.pm:2635
 #, c-format
 msgid "Scanning on the %s will not be possible."
 msgstr "Scanning på %s vil ikke være mulig."
 
-#: printer/printerdrake.pm:2627
+#: printer/printerdrake.pm:2650
 #, c-format
 msgid "Using and Maintaining your %s"
 msgstr "Bruker og vedlikeholder din %s"
 
-#: printer/printerdrake.pm:2641
+#: printer/printerdrake.pm:2664
 #, c-format
 msgid "Configuring device..."
 msgstr "Setter opp enhet..."
 
-#: printer/printerdrake.pm:2678
+#: printer/printerdrake.pm:2701
 #, c-format
 msgid "Making printer port available for CUPS..."
 msgstr "Gjør skriverport tilgjengelig for CUPS..."
 
-#: printer/printerdrake.pm:2688 printer/printerdrake.pm:2962
-#: printer/printerdrake.pm:3115
+#: printer/printerdrake.pm:2711 printer/printerdrake.pm:2985
+#: printer/printerdrake.pm:3138
 #, c-format
 msgid "Reading printer database..."
 msgstr "Leser skriverdatabase  ..."
 
-#: printer/printerdrake.pm:2920
+#: printer/printerdrake.pm:2943
 #, c-format
 msgid "Enter Printer Name and Comments"
 msgstr "Angi Skrivernavn og kommentarer"
 
-#: printer/printerdrake.pm:2924 printer/printerdrake.pm:4183
+#: printer/printerdrake.pm:2947 printer/printerdrake.pm:4206
 #, c-format
 msgid "Name of printer should contain only letters, numbers and the underscore"
 msgstr "Skrivernavn bør inneholde kun bokstaver, tall og understrek"
 
-#: printer/printerdrake.pm:2930 printer/printerdrake.pm:4188
+#: printer/printerdrake.pm:2953 printer/printerdrake.pm:4211
 #, c-format
 msgid ""
 "The printer \"%s\" already exists,\n"
@@ -14073,7 +14086,7 @@ msgstr ""
 "Skriveren \"%s\" eksisterer allerede,\n"
 "ønsker du å overskrive dens oppsett?"
 
-#: printer/printerdrake.pm:2937
+#: printer/printerdrake.pm:2960
 #, c-format
 msgid ""
 "The printer name \"%s\" has more than 12 characters which can make the "
@@ -14083,7 +14096,7 @@ msgstr ""
 "Printernavnet \"%s\" har mer enn 12 tegn som kan gjøre skriveren "
 "utilgjengelig fra Windows-klienter. Ønsker du virkelig å bruke dette navnet?"
 
-#: printer/printerdrake.pm:2946
+#: printer/printerdrake.pm:2969
 #, c-format
 msgid ""
 "Every printer needs a name (for example \"printer\"). The Description and "
@@ -14093,35 +14106,35 @@ msgstr ""
 "plasseringsfeltene trenger ikke å fylles inn. De er kommentarerer for "
 "brukerne."
 
-#: printer/printerdrake.pm:2947
+#: printer/printerdrake.pm:2970
 #, c-format
 msgid "Name of printer"
 msgstr "Navn på skriver"
 
-#: printer/printerdrake.pm:2948 standalone/drakconnect:592
+#: printer/printerdrake.pm:2971 standalone/drakconnect:592
 #: standalone/harddrake2:39 standalone/printerdrake:224
 #: standalone/printerdrake:231
 #, c-format
 msgid "Description"
 msgstr "Beskrivelse"
 
-#: printer/printerdrake.pm:2949 standalone/printerdrake:224
+#: printer/printerdrake.pm:2972 standalone/printerdrake:224
 #: standalone/printerdrake:231
 #, c-format
 msgid "Location"
 msgstr "Plassering"
 
-#: printer/printerdrake.pm:2967
+#: printer/printerdrake.pm:2990
 #, c-format
 msgid "Preparing printer database..."
 msgstr "Forbereder skriverdatabase ..."
 
-#: printer/printerdrake.pm:3093
+#: printer/printerdrake.pm:3116
 #, c-format
 msgid "Your printer model"
 msgstr "Din skrivermodell"
 
-#: printer/printerdrake.pm:3094
+#: printer/printerdrake.pm:3117
 #, c-format
 msgid ""
 "Printerdrake has compared the model name resulting from the printer auto-"
@@ -14146,18 +14159,18 @@ msgstr ""
 "\n"
 "%s"
 
-#: printer/printerdrake.pm:3099 printer/printerdrake.pm:3102
+#: printer/printerdrake.pm:3122 printer/printerdrake.pm:3125
 #, c-format
 msgid "The model is correct"
 msgstr "Modellen er riktig"
 
-#: printer/printerdrake.pm:3100 printer/printerdrake.pm:3101
-#: printer/printerdrake.pm:3104
+#: printer/printerdrake.pm:3123 printer/printerdrake.pm:3124
+#: printer/printerdrake.pm:3127
 #, c-format
 msgid "Select model manually"
 msgstr "Velg modell manuelt"
 
-#: printer/printerdrake.pm:3128
+#: printer/printerdrake.pm:3151
 #, c-format
 msgid ""
 "\n"
@@ -14172,12 +14185,12 @@ msgstr ""
 "skrivermodell riktig. Søk etter riktig modell i listen når pekeren står over "
 "en feil modell eller på \"Rå skriver\"."
 
-#: printer/printerdrake.pm:3147
+#: printer/printerdrake.pm:3170
 #, c-format
 msgid "Install a manufacturer-supplied PPD file"
 msgstr "Installer en PPD-fil levert av produsent"
 
-#: printer/printerdrake.pm:3179
+#: printer/printerdrake.pm:3202
 #, c-format
 msgid ""
 "Every PostScript printer is delivered with a PPD file which describes the "
@@ -14186,7 +14199,7 @@ msgstr ""
 "Hver PostScript-skriver er levert med en PPD-fil som beskriver skriverens "
 "valg og finesser."
 
-#: printer/printerdrake.pm:3180
+#: printer/printerdrake.pm:3203
 #, c-format
 msgid ""
 "This file is usually somewhere on the CD with the Windows and Mac drivers "
@@ -14195,12 +14208,12 @@ msgstr ""
 "Denne filen er vanligvis et sted på CDen med Windows- og Mac-driverene som "
 "fulgte med skriveren."
 
-#: printer/printerdrake.pm:3181
+#: printer/printerdrake.pm:3204
 #, c-format
 msgid "You can find the PPD files also on the manufacturer's web sites."
 msgstr "Du kan finne PPD-filer også på produsentenes nettsteder."
 
-#: printer/printerdrake.pm:3182
+#: printer/printerdrake.pm:3205
 #, c-format
 msgid ""
 "If you have Windows installed on your machine, you can find the PPD file on "
@@ -14209,7 +14222,7 @@ msgstr ""
 "Hvis du har Windows installert på din maskin så kan du finne PPD-fila på din "
 "Windows-partisjon også."
 
-#: printer/printerdrake.pm:3183
+#: printer/printerdrake.pm:3206
 #, c-format
 msgid ""
 "Installing the printer's PPD file and using it when setting up the printer "
@@ -14219,7 +14232,7 @@ msgstr ""
 "Installerer skriverens PPD-fil og bruker den mens den setter opp skriveren "
 "så alle valg til skriveren vil være tilgjengelig via skriverens hardware"
 
-#: printer/printerdrake.pm:3184
+#: printer/printerdrake.pm:3207
 #, c-format
 msgid ""
 "Here you can choose the PPD file to be installed on your machine, it will "
@@ -14228,51 +14241,51 @@ msgstr ""
 "Her kan du velge PPD-filen som skal installeres på din maskin, den vil siden "
 "bli brukt til oppsett av din skriver."
 
-#: printer/printerdrake.pm:3186
+#: printer/printerdrake.pm:3209
 #, c-format
 msgid "Install PPD file from"
 msgstr "Installer PPD-fil fra"
 
-#: printer/printerdrake.pm:3189 printer/printerdrake.pm:3197
+#: printer/printerdrake.pm:3212 printer/printerdrake.pm:3220
 #: standalone/scannerdrake:183 standalone/scannerdrake:192
 #: standalone/scannerdrake:242 standalone/scannerdrake:250
 #, c-format
 msgid "Floppy Disk"
 msgstr "Diskett"
 
-#: printer/printerdrake.pm:3190 printer/printerdrake.pm:3199
+#: printer/printerdrake.pm:3213 printer/printerdrake.pm:3222
 #: standalone/scannerdrake:184 standalone/scannerdrake:194
 #: standalone/scannerdrake:243 standalone/scannerdrake:252
 #, c-format
 msgid "Other place"
 msgstr "Annet sted"
 
-#: printer/printerdrake.pm:3205
+#: printer/printerdrake.pm:3228
 #, c-format
 msgid "Select PPD file"
 msgstr "Velg PPD-fil"
 
-#: printer/printerdrake.pm:3209
+#: printer/printerdrake.pm:3232
 #, c-format
 msgid "The PPD file %s does not exist or is unreadable!"
 msgstr "PPD-fila %s eksisterer ikke eller er uleselig!"
 
-#: printer/printerdrake.pm:3215
+#: printer/printerdrake.pm:3238
 #, c-format
 msgid "The PPD file %s does not conform with the PPD specifications!"
 msgstr "PPD-fila %s følger ikke PPD-spesifikasjonene!"
 
-#: printer/printerdrake.pm:3226
+#: printer/printerdrake.pm:3249
 #, c-format
 msgid "Installing PPD file..."
 msgstr "Installerer PPD-fil..."
 
-#: printer/printerdrake.pm:3345
+#: printer/printerdrake.pm:3368
 #, c-format
 msgid "OKI winprinter configuration"
 msgstr "OKI winprinter-oppsett"
 
-#: printer/printerdrake.pm:3346
+#: printer/printerdrake.pm:3369
 #, c-format
 msgid ""
 "You are configuring an OKI laser winprinter. These printers\n"
@@ -14289,12 +14302,12 @@ msgstr ""
 "du skriver ut en testside. Ellers vil ikke skriveren virke. Innstillinger "
 "for oppkoblingstype vil bli ignorert av driveren."
 
-#: printer/printerdrake.pm:3371 printer/printerdrake.pm:3401
+#: printer/printerdrake.pm:3394 printer/printerdrake.pm:3424
 #, c-format
 msgid "Lexmark inkjet configuration"
 msgstr "Lexmark inkjet-oppsett"
 
-#: printer/printerdrake.pm:3372
+#: printer/printerdrake.pm:3395
 #, c-format
 msgid ""
 "The inkjet printer drivers provided by Lexmark only support local printers, "
@@ -14306,7 +14319,7 @@ msgstr ""
 "skrivere på fjernmaskiner eller skrivertjenerbokser. Koble skriveren til en "
 "lokal port eller sett den opp på maskinen hvor det er koblet til."
 
-#: printer/printerdrake.pm:3402
+#: printer/printerdrake.pm:3425
 #, c-format
 msgid ""
 "To be able to print with your Lexmark inkjet and this configuration, you "
@@ -14327,12 +14340,12 @@ msgstr ""
 "skriverhode alignment sider med \"lexmarkmaintain\" og juster hode alignment-"
 "innstillinger med dette programmet."
 
-#: printer/printerdrake.pm:3412
+#: printer/printerdrake.pm:3435
 #, c-format
 msgid "Lexmark X125 configuration"
 msgstr "Lexmark X125-oppsett"
 
-#: printer/printerdrake.pm:3413
+#: printer/printerdrake.pm:3436
 #, c-format
 msgid ""
 "The driver for this printer only supports printers locally connected via "
@@ -14345,12 +14358,12 @@ msgstr ""
 "skriveren til en lokal USB-port eller sett den opp på maskinen hvor den er "
 "koblet til."
 
-#: printer/printerdrake.pm:3435
+#: printer/printerdrake.pm:3458
 #, c-format
 msgid "Samsung ML/QL-85G configuration"
 msgstr "Samsung ML/QL-85G-oppsett"
 
-#: printer/printerdrake.pm:3436 printer/printerdrake.pm:3463
+#: printer/printerdrake.pm:3459 printer/printerdrake.pm:3486
 #, c-format
 msgid ""
 "The driver for this printer only supports printers locally connected on the "
@@ -14363,17 +14376,17 @@ msgstr ""
 "paralellporter. Koble til skriveren på den første parallellporten eller sett "
 "den opp på maskinen den er koblet til."
 
-#: printer/printerdrake.pm:3462
+#: printer/printerdrake.pm:3485
 #, c-format
 msgid "Canon LBP-460/660 configuration"
 msgstr "Canon LBP-460/660-oppsett"
 
-#: printer/printerdrake.pm:3489
+#: printer/printerdrake.pm:3512
 #, c-format
 msgid "Canon LBP-810/1120 (CAPT) configuration"
 msgstr "Canon LBP-810/1120 (CAPT)-oppsett"
 
-#: printer/printerdrake.pm:3490
+#: printer/printerdrake.pm:3513
 #, c-format
 msgid ""
 "The driver for this printer only supports printers locally connected via "
@@ -14386,12 +14399,12 @@ msgstr ""
 "tilkoblet via parallellport. Koble skriveren til en lokal USB-port eller "
 "sett den opp på maskinen hvor den er koblet til."
 
-#: printer/printerdrake.pm:3497
+#: printer/printerdrake.pm:3520
 #, c-format
 msgid "Firmware-Upload for HP LaserJet 1000"
 msgstr "Firmwareopplasting for HP LaserJet 1000"
 
-#: printer/printerdrake.pm:3647
+#: printer/printerdrake.pm:3670
 #, c-format
 msgid ""
 "Printer default settings\n"
@@ -14409,27 +14422,27 @@ msgstr ""
 "papirholdere) er satt riktig. Merk deg at veldig god utskriftskvalitet kan "
 "gjøre utskriften mye tregere."
 
-#: printer/printerdrake.pm:3772
+#: printer/printerdrake.pm:3795
 #, c-format
 msgid "Printer default settings"
 msgstr "Standardoppsett for skriver"
 
-#: printer/printerdrake.pm:3779
+#: printer/printerdrake.pm:3802
 #, c-format
 msgid "Option %s must be an integer number!"
 msgstr "Valg %s må være ett helt tall!"
 
-#: printer/printerdrake.pm:3783
+#: printer/printerdrake.pm:3806
 #, c-format
 msgid "Option %s must be a number!"
 msgstr "Valg %s må være ett tall!"
 
-#: printer/printerdrake.pm:3787
+#: printer/printerdrake.pm:3810
 #, c-format
 msgid "Option %s out of range!"
 msgstr "Valg %s er utenfor rekkevidden!"
 
-#: printer/printerdrake.pm:3839
+#: printer/printerdrake.pm:3862
 #, c-format
 msgid ""
 "Do you want to set this printer (\"%s\")\n"
@@ -14438,12 +14451,12 @@ msgstr ""
 "Ønsker du å sette denne skriveren (\"%s\")\n"
 "som standard skriver?"
 
-#: printer/printerdrake.pm:3855
+#: printer/printerdrake.pm:3878
 #, c-format
 msgid "Test pages"
 msgstr "Testsider"
 
-#: printer/printerdrake.pm:3856
+#: printer/printerdrake.pm:3879
 #, c-format
 msgid ""
 "Please select the test pages you want to print.\n"
@@ -14456,47 +14469,47 @@ msgstr ""
 "for lite minne vil den ikke skrives ut i det hele tatt. Som regel vil det "
 "holde å skrive ut standard testsiden."
 
-#: printer/printerdrake.pm:3860
+#: printer/printerdrake.pm:3883
 #, c-format
 msgid "No test pages"
 msgstr "Ingen testsider"
 
-#: printer/printerdrake.pm:3861
+#: printer/printerdrake.pm:3884
 #, c-format
 msgid "Print"
 msgstr "Skriv ut"
 
-#: printer/printerdrake.pm:3886
+#: printer/printerdrake.pm:3909
 #, c-format
 msgid "Standard test page"
 msgstr "Standard testside"
 
-#: printer/printerdrake.pm:3889
+#: printer/printerdrake.pm:3912
 #, c-format
 msgid "Alternative test page (Letter)"
 msgstr "Alternativ testside (brev)"
 
-#: printer/printerdrake.pm:3892
+#: printer/printerdrake.pm:3915
 #, c-format
 msgid "Alternative test page (A4)"
 msgstr "Alternativ testside (A4)"
 
-#: printer/printerdrake.pm:3894
+#: printer/printerdrake.pm:3917
 #, c-format
 msgid "Photo test page"
 msgstr "Fototestside"
 
-#: printer/printerdrake.pm:3907
+#: printer/printerdrake.pm:3930
 #, c-format
 msgid "Printing test page(s)..."
 msgstr "Skriver ut testside(r)..."
 
-#: printer/printerdrake.pm:3927
+#: printer/printerdrake.pm:3950
 #, c-format
 msgid "Skipping photo test page."
 msgstr "Hopper over fototestside."
 
-#: printer/printerdrake.pm:3944
+#: printer/printerdrake.pm:3967
 #, c-format
 msgid ""
 "Test page(s) have been sent to the printer.\n"
@@ -14511,7 +14524,7 @@ msgstr ""
 "%s\n"
 "\n"
 
-#: printer/printerdrake.pm:3948
+#: printer/printerdrake.pm:3971
 #, c-format
 msgid ""
 "Test page(s) have been sent to the printer.\n"
@@ -14520,17 +14533,17 @@ msgstr ""
 "Testsiden(e) har blitt sendt til skriveren.\n"
 "Det kan ta litt tid før skriveren starter.\n"
 
-#: printer/printerdrake.pm:3958
+#: printer/printerdrake.pm:3981
 #, c-format
 msgid "Did it work properly?"
 msgstr "Virker det som det skal?"
 
-#: printer/printerdrake.pm:3982
+#: printer/printerdrake.pm:4005
 #, c-format
 msgid "Raw printer"
 msgstr "Rå skriver"
 
-#: printer/printerdrake.pm:4004
+#: printer/printerdrake.pm:4027
 #, c-format
 msgid ""
 "To print a file from the command line (terminal window) you can either use "
@@ -14543,7 +14556,7 @@ msgstr ""
 "eller \"kprinter <fil>\". De grafiske verktøyene lar deg velge skriver og "
 "forandre utskriftsvalg enkelt. \n"
 
-#: printer/printerdrake.pm:4006
+#: printer/printerdrake.pm:4029
 #, c-format
 msgid ""
 "These commands you can also use in the \"Printing command\" field of the "
@@ -14554,8 +14567,8 @@ msgstr ""
 "skriverdialogen til mange applikasjoner, men her skal du ikke angi filnavnet "
 "ettersom det er gitt av applikasjonen.\n"
 
-#: printer/printerdrake.pm:4009 printer/printerdrake.pm:4026
-#: printer/printerdrake.pm:4036
+#: printer/printerdrake.pm:4032 printer/printerdrake.pm:4049
+#: printer/printerdrake.pm:4059
 #, c-format
 msgid ""
 "\n"
@@ -14568,7 +14581,7 @@ msgstr ""
 "skriverjobb. Du kan ganske enkelt angi de forskjellige valgene på "
 "kommandolinja, for eksempel \"%s <fil>\". "
 
-#: printer/printerdrake.pm:4012 printer/printerdrake.pm:4052
+#: printer/printerdrake.pm:4035 printer/printerdrake.pm:4075
 #, c-format
 msgid ""
 "To know about the options available for the current printer read either the "
@@ -14579,7 +14592,7 @@ msgstr ""
 "enten listen nedenfor eller klikk på  \"Skrivervalgliste\"-knappen.%s%s%s\n"
 "\n"
 
-#: printer/printerdrake.pm:4016
+#: printer/printerdrake.pm:4039
 #, c-format
 msgid ""
 "Here is a list of the available printing options for the current printer:\n"
@@ -14588,7 +14601,7 @@ msgstr ""
 "Dette er en liste over tilgjengelige valg for skriveren:\n"
 "\n"
 
-#: printer/printerdrake.pm:4021 printer/printerdrake.pm:4031
+#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4054
 #, c-format
 msgid ""
 "To print a file from the command line (terminal window) use the command \"%s "
@@ -14597,8 +14610,8 @@ msgstr ""
 "For å skrive ut en fil fra kommandolinja (terminalvindu), bruk kommandoen \"%"
 "s  <fil>\". \n"
 
-#: printer/printerdrake.pm:4023 printer/printerdrake.pm:4033
-#: printer/printerdrake.pm:4043
+#: printer/printerdrake.pm:4046 printer/printerdrake.pm:4056
+#: printer/printerdrake.pm:4066
 #, c-format
 msgid ""
 "This command you can also use in the \"Printing command\" field of the "
@@ -14609,7 +14622,7 @@ msgstr ""
 "skriverdialogen til mange applikasjoner. Her skal du ikke oppgi et filnavn "
 "ettersom det er gitt av applikasjonen.\n"
 
-#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4038
+#: printer/printerdrake.pm:4051 printer/printerdrake.pm:4061
 #, c-format
 msgid ""
 "To get a list of the options available for the current printer click on the "
@@ -14618,7 +14631,7 @@ msgstr ""
 "Får å få en liste over tilgjengelige valg for nåværende skriver klikk på "
 "\"Skrivervalgliste\"-knappen."
 
-#: printer/printerdrake.pm:4041
+#: printer/printerdrake.pm:4064
 #, c-format
 msgid ""
 "To print a file from the command line (terminal window) use the command \"%s "
@@ -14627,7 +14640,7 @@ msgstr ""
 "Får å skrive ut en fil fra kommandolinjen (terminalvindu) bruk kommandoen \"%"
 "s <file>\" eller \"%s <file>\".\n"
 
-#: printer/printerdrake.pm:4045
+#: printer/printerdrake.pm:4068
 #, c-format
 msgid ""
 "You can also use the graphical interface \"xpdq\" for setting options and "
@@ -14645,7 +14658,7 @@ msgstr ""
 "annet\n"
 "ved papirkræsj.\n"
 
-#: printer/printerdrake.pm:4049
+#: printer/printerdrake.pm:4072
 #, c-format
 msgid ""
 "\n"
@@ -14658,27 +14671,27 @@ msgstr ""
 "spesifik skriverjobb. Bare legg til de ønskede valgene til kommandolinjen, "
 "feks. \"%s <fil>\".\n"
 
-#: printer/printerdrake.pm:4058
+#: printer/printerdrake.pm:4081
 #, c-format
 msgid "Using/Maintaining the printer \"%s\""
 msgstr "Bruker/vedlikeholder skriveren \"%s\""
 
-#: printer/printerdrake.pm:4059
+#: printer/printerdrake.pm:4082
 #, c-format
 msgid "Printing on the printer \"%s\""
 msgstr "Skriver ut på skriver \"%s\""
 
-#: printer/printerdrake.pm:4065
+#: printer/printerdrake.pm:4088
 #, c-format
 msgid "Print option list"
 msgstr "Skrivervalgliste"
 
-#: printer/printerdrake.pm:4069
+#: printer/printerdrake.pm:4092
 #, fuzzy, c-format
 msgid "Printing option list..."
 msgstr "Skrivervalgliste"
 
-#: printer/printerdrake.pm:4087
+#: printer/printerdrake.pm:4110
 #, c-format
 msgid ""
 "Your %s is set up with HP's HPLIP driver software. This way many special "
@@ -14689,7 +14702,7 @@ msgstr ""
 "mange spesialfinesser din printer måtte ha støttet.\n"
 "\n"
 
-#: printer/printerdrake.pm:4090
+#: printer/printerdrake.pm:4113
 #, c-format
 msgid ""
 "The scanner in your printer can be used with the usual SANE software, for "
@@ -14698,7 +14711,7 @@ msgstr ""
 "Scanneren i skriveren din kan brukes med den vanlige SANE-programvaren, "
 "feks. Kooka eller XSane (Begge i Multimedia/Grafikk-menyen). "
 
-#: printer/printerdrake.pm:4091
+#: printer/printerdrake.pm:4114
 #, c-format
 msgid ""
 "Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
@@ -14709,7 +14722,7 @@ msgstr ""
 "dele scanneren din på nettverket.\n"
 "\n"
 
-#: printer/printerdrake.pm:4095
+#: printer/printerdrake.pm:4118
 #, c-format
 msgid ""
 "The memory card readers in your printer can be accessed like a usual USB "
@@ -14718,7 +14731,7 @@ msgstr ""
 "Minnekortleserne i din skriver kan brukes som en vanlig USB-"
 "masselagringsenhet."
 
-#: printer/printerdrake.pm:4096
+#: printer/printerdrake.pm:4119
 #, c-format
 msgid ""
 "After inserting a card a hard disk icon to access the card should appear on "
@@ -14729,7 +14742,7 @@ msgstr ""
 "dukke opp på ditt skrivebord.\n"
 "\n"
 
-#: printer/printerdrake.pm:4098
+#: printer/printerdrake.pm:4121
 #, c-format
 msgid ""
 "The memory card readers in your printer can be accessed using HP's Printer "
@@ -14740,7 +14753,7 @@ msgstr ""
 "(Meny: System/Overvåking/HP Printer Toolbox) ved å klikke på \"Access Photo "
 "Cards...\"-knappen i \"Functions\"-arkfanen. "
 
-#: printer/printerdrake.pm:4099
+#: printer/printerdrake.pm:4122
 #, c-format
 msgid ""
 "Note that this is very slow, reading the pictures from the camera or a USB "
@@ -14751,7 +14764,7 @@ msgstr ""
 "kortleser er vanligvis raskere.\n"
 "\n"
 
-#: printer/printerdrake.pm:4102
+#: printer/printerdrake.pm:4125
 #, c-format
 msgid ""
 "HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
@@ -14762,33 +14775,33 @@ msgstr ""
 "stor mengde statusovervåkning og vedlikeholdsfunksjoner for din %s:\n"
 "\n"
 
-#: printer/printerdrake.pm:4103
+#: printer/printerdrake.pm:4126
 #, c-format
 msgid " - Ink level/status info\n"
 msgstr " - Blekknivå/statusinformasjon:\n"
 
-#: printer/printerdrake.pm:4104
+#: printer/printerdrake.pm:4127
 #, c-format
 msgid " - Ink nozzle cleaning\n"
 msgstr " - Blekkpatronrensing \n"
 
-#: printer/printerdrake.pm:4105
+#: printer/printerdrake.pm:4128
 #, c-format
 msgid " - Print head alignment\n"
 msgstr " - Skriverhodejustering\n"
 
-#: printer/printerdrake.pm:4106
+#: printer/printerdrake.pm:4129
 #, c-format
 msgid " - Color calibration\n"
 msgstr " - Fargekalibrering\n"
 
-#: printer/printerdrake.pm:4147 printer/printerdrake.pm:4174
-#: printer/printerdrake.pm:4209
+#: printer/printerdrake.pm:4170 printer/printerdrake.pm:4197
+#: printer/printerdrake.pm:4232
 #, c-format
 msgid "Transfer printer configuration"
 msgstr "Overfør skriveroppsett"
 
-#: printer/printerdrake.pm:4148
+#: printer/printerdrake.pm:4171
 #, c-format
 msgid ""
 "You can copy the printer configuration which you have done for the spooler %"
@@ -14803,7 +14816,7 @@ msgstr ""
 "ikke jobber.\n"
 "Ikke alle køer kan overføres grunnet:\n"
 
-#: printer/printerdrake.pm:4151
+#: printer/printerdrake.pm:4174
 #, c-format
 msgid ""
 "CUPS does not support printers on Novell servers or printers sending the "
@@ -14812,7 +14825,7 @@ msgstr ""
 "CUPS støtter ikke skrivere på Novell-tjenere eller skrivere som sender "
 "dataene inn i en friformet kommando.\n"
 
-#: printer/printerdrake.pm:4153
+#: printer/printerdrake.pm:4176
 #, c-format
 msgid ""
 "PDQ only supports local printers, remote LPD printers, and Socket/TCP "
@@ -14821,12 +14834,12 @@ msgstr ""
 "PDQ støtter bare lokale skrivere, fjern-LPD skrivere, og Socket/TCP-"
 "skrivere.\n"
 
-#: printer/printerdrake.pm:4155
+#: printer/printerdrake.pm:4178
 #, c-format
 msgid "LPD and LPRng do not support IPP printers.\n"
 msgstr "LPD og LPRng støtter ikke IPP-skrivere.\n"
 
-#: printer/printerdrake.pm:4157
+#: printer/printerdrake.pm:4180
 #, c-format
 msgid ""
 "In addition, queues not created with this program or \"foomatic-configure\" "
@@ -14835,7 +14848,7 @@ msgstr ""
 "I tillegg, køer laget med dette programmet eller \"foomatic -configure\" kan "
 "ikke overflyttes."
 
-#: printer/printerdrake.pm:4158
+#: printer/printerdrake.pm:4181
 #, c-format
 msgid ""
 "\n"
@@ -14846,7 +14859,7 @@ msgstr ""
 "Skrivere satt opp med PPD-filene som produsenten har laget eller med CUPS-"
 "drivere kan ikke overføres."
 
-#: printer/printerdrake.pm:4159
+#: printer/printerdrake.pm:4182
 #, c-format
 msgid ""
 "\n"
@@ -14857,17 +14870,17 @@ msgstr ""
 "Velg skriverene som du vil overføre og klikk \n"
 "\"Overfør\"."
 
-#: printer/printerdrake.pm:4162
+#: printer/printerdrake.pm:4185
 #, c-format
 msgid "Do not transfer printers"
 msgstr "Ikke overfør skrivere"
 
-#: printer/printerdrake.pm:4163 printer/printerdrake.pm:4179
+#: printer/printerdrake.pm:4186 printer/printerdrake.pm:4202
 #, c-format
 msgid "Transfer"
 msgstr "Overfør"
 
-#: printer/printerdrake.pm:4175
+#: printer/printerdrake.pm:4198
 #, c-format
 msgid ""
 "A printer named \"%s\" already exists under %s. \n"
@@ -14878,17 +14891,17 @@ msgstr ""
 "Klikk \"Overfør\" for å overskrive.\n"
 "Du kan også gi ett nytt skrivernavn, eller hoppe over denne skriveren."
 
-#: printer/printerdrake.pm:4196
+#: printer/printerdrake.pm:4219
 #, c-format
 msgid "New printer name"
 msgstr "Nytt skrivernavn"
 
-#: printer/printerdrake.pm:4199
+#: printer/printerdrake.pm:4222
 #, c-format
 msgid "Transferring %s..."
 msgstr "Overfører %s ..."
 
-#: printer/printerdrake.pm:4210
+#: printer/printerdrake.pm:4233
 #, c-format
 msgid ""
 "You have transferred your former default printer (\"%s\"), Should it be also "
@@ -14898,28 +14911,28 @@ msgstr ""
 "opp\n"
 "som standardskriver også under det nye skriversystemet - %s?"
 
-#: printer/printerdrake.pm:4220
+#: printer/printerdrake.pm:4243
 #, c-format
 msgid "Refreshing printer data..."
 msgstr "Oppdaterer skriverdata ..."
 
-#: printer/printerdrake.pm:4230
+#: printer/printerdrake.pm:4253
 #, c-format
 msgid "Starting network..."
 msgstr "Starter nettverk ..."
 
-#: printer/printerdrake.pm:4273 printer/printerdrake.pm:4277
-#: printer/printerdrake.pm:4279
+#: printer/printerdrake.pm:4296 printer/printerdrake.pm:4300
+#: printer/printerdrake.pm:4302
 #, c-format
 msgid "Configure the network now"
 msgstr "Sett opp nettverket nå"
 
-#: printer/printerdrake.pm:4274
+#: printer/printerdrake.pm:4297
 #, c-format
 msgid "Network functionality not configured"
 msgstr "Nettverksfunksjonalitet ikke satt opp"
 
-#: printer/printerdrake.pm:4275
+#: printer/printerdrake.pm:4298
 #, c-format
 msgid ""
 "You are going to configure a remote printer. This needs working network "
@@ -14932,12 +14945,12 @@ msgstr ""
 "nettverket, vil du ikke bli i stand til å bruke skriveren du setter opp. "
 "Hvordan vil du fortsette?"
 
-#: printer/printerdrake.pm:4278
+#: printer/printerdrake.pm:4301
 #, c-format
 msgid "Go on without configuring the network"
 msgstr "Fortsett uten å sette opp nettverket"
 
-#: printer/printerdrake.pm:4309
+#: printer/printerdrake.pm:4332
 #, c-format
 msgid ""
 "The network configuration done during the installation cannot be started "
@@ -14952,7 +14965,7 @@ msgstr ""
 "\"Nettverk og internett\"/ \"Forbindelse\", og sett opp skriveren etterpå, "
 "også i %s Kontrollsenter, under /\"Maskinvare\"/\"Skriver\""
 
-#: printer/printerdrake.pm:4310
+#: printer/printerdrake.pm:4333
 #, c-format
 msgid ""
 "The network access was not running and could not be started. Please check "
@@ -14963,27 +14976,27 @@ msgstr ""
 "nettverksoppsettet og prøv deretter å sette opp nettverks-\n"
 "skriveren igjen."
 
-#: printer/printerdrake.pm:4320
+#: printer/printerdrake.pm:4343
 #, c-format
 msgid "Restarting printing system..."
 msgstr "Starter skriversystemet på nytt ..."
 
-#: printer/printerdrake.pm:4351
+#: printer/printerdrake.pm:4374
 #, c-format
 msgid "high"
 msgstr "høy"
 
-#: printer/printerdrake.pm:4351
+#: printer/printerdrake.pm:4374
 #, c-format
 msgid "paranoid"
 msgstr "paranoid"
 
-#: printer/printerdrake.pm:4353
+#: printer/printerdrake.pm:4376
 #, c-format
 msgid "Installing a printing system in the %s security level"
 msgstr "Installerer et utskriftsystem på %s sikkerhetsnivået"
 
-#: printer/printerdrake.pm:4354
+#: printer/printerdrake.pm:4377
 #, c-format
 msgid ""
 "You are about to install the printing system %s on a system running in the %"
@@ -15007,12 +15020,12 @@ msgstr ""
 "\n"
 "Er du sikker på at du vil sette opp skriver på dette systemet?"
 
-#: printer/printerdrake.pm:4390
+#: printer/printerdrake.pm:4413
 #, c-format
 msgid "Starting the printing system at boot time"
 msgstr "Starter utskriftsystemet ved oppstart"
 
-#: printer/printerdrake.pm:4391
+#: printer/printerdrake.pm:4414
 #, c-format
 msgid ""
 "The printing system (%s) will not be started automatically when the machine "
@@ -15032,32 +15045,32 @@ msgstr ""
 "\n"
 "Ønsker du å skru på automatisk start av skriversystemet igjen?"
 
-#: printer/printerdrake.pm:4414
+#: printer/printerdrake.pm:4437
 #, c-format
 msgid "Checking installed software..."
 msgstr "Sjekker installert programvare..."
 
-#: printer/printerdrake.pm:4420
+#: printer/printerdrake.pm:4443
 #, c-format
 msgid "Removing %s..."
 msgstr "Fjerner %s ..."
 
-#: printer/printerdrake.pm:4424
+#: printer/printerdrake.pm:4447
 #, c-format
 msgid "Could not remove the %s printing system!"
 msgstr "Kunne ikke fjerne %s-utskriftssystemet!"
 
-#: printer/printerdrake.pm:4448
+#: printer/printerdrake.pm:4471
 #, c-format
 msgid "Installing %s..."
 msgstr "Installerer %s ..."
 
-#: printer/printerdrake.pm:4452
+#: printer/printerdrake.pm:4475
 #, c-format
 msgid "Could not install the %s printing system!"
 msgstr "Kunne ikke installere %s-utskriftssystemet!"
 
-#: printer/printerdrake.pm:4520
+#: printer/printerdrake.pm:4543
 #, c-format
 msgid ""
 "In this mode there is no local printing system, all printing requests go "
@@ -15070,7 +15083,7 @@ msgstr ""
 "definere lokale utskriftskøer da og hvis den spesifiserte tjeneren er nede "
 "vil det ikke være mulig å skrive ut fra denne maskinen."
 
-#: printer/printerdrake.pm:4522
+#: printer/printerdrake.pm:4545
 #, c-format
 msgid ""
 "Enter the host name or IP of your CUPS server and click OK if you want to "
@@ -15079,32 +15092,32 @@ msgstr ""
 "Skriv inn vertsnavnet eller IP-adressen til din CUPS-tjener og klikk OK hvis "
 "du vil bruke dette moduset, hvis ikke, klikk \"Avslutt\"."
 
-#: printer/printerdrake.pm:4536
+#: printer/printerdrake.pm:4559
 #, c-format
 msgid "Name or IP of remote server:"
 msgstr "Navn eller IP til ekstern tjener."
 
-#: printer/printerdrake.pm:4556
+#: printer/printerdrake.pm:4579
 #, c-format
 msgid "Setting Default Printer..."
 msgstr "Setter standardskriver..."
 
-#: printer/printerdrake.pm:4576
+#: printer/printerdrake.pm:4599
 #, c-format
 msgid "Local CUPS printing system or remote CUPS server?"
 msgstr "Lokalt CUPS-utskriftssystem eller ekstern CUPS-tjener?"
 
-#: printer/printerdrake.pm:4577
+#: printer/printerdrake.pm:4600
 #, c-format
 msgid "The CUPS printing system can be used in two ways: "
 msgstr "CUPS-utskiftssystemet kan brukes på to måter:"
 
-#: printer/printerdrake.pm:4579
+#: printer/printerdrake.pm:4602
 #, c-format
 msgid "1. The CUPS printing system can run locally. "
 msgstr "1. CUPS-utskriftssystemet kan kjøres lokalt."
 
-#: printer/printerdrake.pm:4580
+#: printer/printerdrake.pm:4603
 #, c-format
 msgid ""
 "Then locally connected printers can be used and remote printers on other "
@@ -15113,7 +15126,7 @@ msgstr ""
 "Da vil skrivere som er koblet til lokalt kunne brukes og eksterne skrivere "
 "på andre CUPS-tjenere i samme nettverket blir oppdaget automatisk."
 
-#: printer/printerdrake.pm:4581
+#: printer/printerdrake.pm:4604
 #, c-format
 msgid ""
 "Disadvantage of this approach is, that more resources on the local machine "
@@ -15125,14 +15138,14 @@ msgstr ""
 "maskinen: Flere programpakker må installeres, CUPS-tjenesten må kjøre i "
 "bakgrunnen og trenger litt minne, og IPP-porten (port 631) blir åpnet."
 
-#: printer/printerdrake.pm:4583
+#: printer/printerdrake.pm:4606
 #, c-format
 msgid "2. All printing requests are immediately sent to a remote CUPS server. "
 msgstr ""
 "2. Alle utskriftsforespørseler blir umiddelbart sent til en ekstern CUPS-"
 "tjener."
 
-#: printer/printerdrake.pm:4584
+#: printer/printerdrake.pm:4607
 #, c-format
 msgid ""
 "Here local resource occupation is reduced to a minimum. No CUPS daemon is "
@@ -15144,7 +15157,7 @@ msgstr ""
 "programvareinfrastruktur for å sette opp lokale utskriftsforespørseler blir "
 "installert, så mindre minne og harddiskplass blir brukt."
 
-#: printer/printerdrake.pm:4585
+#: printer/printerdrake.pm:4608
 #, c-format
 msgid ""
 "Disadvantage is that it is not possible to define local printers then and if "
@@ -15154,48 +15167,48 @@ msgstr ""
 "spesifiserte tjeneren er nede er det ikke mulig å skrive ut fra denne "
 "maskinen."
 
-#: printer/printerdrake.pm:4587
+#: printer/printerdrake.pm:4610
 #, c-format
 msgid "How should CUPS be set up on your machine?"
 msgstr "Hvordan skal CUPS bli satt opp på din maskin?"
 
-#: printer/printerdrake.pm:4591 printer/printerdrake.pm:4606
-#: printer/printerdrake.pm:4610 printer/printerdrake.pm:4616
+#: printer/printerdrake.pm:4614 printer/printerdrake.pm:4629
+#: printer/printerdrake.pm:4633 printer/printerdrake.pm:4639
 #, c-format
 msgid "Remote server, specify Name or IP here:"
 msgstr "Ekstern tjener, spesifiser Navn eller IP her:"
 
-#: printer/printerdrake.pm:4605
+#: printer/printerdrake.pm:4628
 #, c-format
 msgid "Local CUPS printing system"
 msgstr "Lokalt CUPS-utskriftssystem"
 
-#: printer/printerdrake.pm:4644
+#: printer/printerdrake.pm:4667
 #, c-format
 msgid "Select Printer Spooler"
 msgstr "Velg skriverkøbehandler"
 
-#: printer/printerdrake.pm:4645
+#: printer/printerdrake.pm:4668
 #, c-format
 msgid "Which printing system (spooler) do you want to use?"
 msgstr "Hvilket utskriftsystem (købehandler) ønsker du å bruke?"
 
-#: printer/printerdrake.pm:4694
+#: printer/printerdrake.pm:4717
 #, c-format
 msgid "Failed to configure printer \"%s\"!"
 msgstr "Klarte ikke å sette opp skriver \"%s\"!"
 
-#: printer/printerdrake.pm:4709
+#: printer/printerdrake.pm:4732
 #, c-format
 msgid "Installing Foomatic..."
 msgstr "Installerer Foomatic ..."
 
-#: printer/printerdrake.pm:4715
+#: printer/printerdrake.pm:4738
 #, c-format
 msgid "Could not install %s packages, %s cannot be started!"
 msgstr "Kunne ikke installere %s-pakkene. %s kan ikke startes!"
 
-#: printer/printerdrake.pm:4910
+#: printer/printerdrake.pm:4933
 #, c-format
 msgid ""
 "The following printers are configured. Double-click on a printer to change "
@@ -15206,48 +15219,48 @@ msgstr ""
 "oppsettet; for å gjøre den til standard printer; eller for å vise "
 "informasjon om den."
 
-#: printer/printerdrake.pm:4940
+#: printer/printerdrake.pm:4963
 #, c-format
 msgid "Display all available remote CUPS printers"
 msgstr "Vis alle tilgjengelige fjern-CUPS-skrivere"
 
-#: printer/printerdrake.pm:4941
+#: printer/printerdrake.pm:4964
 #, c-format
 msgid "Refresh printer list (to display all available remote CUPS printers)"
 msgstr "Oppdater skriverliste (for å vise alle tilgjengelige CUPS-skrivere)"
 
-#: printer/printerdrake.pm:4952
+#: printer/printerdrake.pm:4975
 #, c-format
 msgid "CUPS configuration"
 msgstr "CUPS-oppsett"
 
-#: printer/printerdrake.pm:4973
+#: printer/printerdrake.pm:4996
 #, c-format
 msgid "Change the printing system"
 msgstr "Endrer utskriftssystemet"
 
-#: printer/printerdrake.pm:4982
+#: printer/printerdrake.pm:5005
 #, c-format
 msgid "Normal Mode"
 msgstr "Normalt modus"
 
-#: printer/printerdrake.pm:4983
+#: printer/printerdrake.pm:5006
 #, c-format
 msgid "Expert Mode"
 msgstr "Ekspertmodus"
 
-#: printer/printerdrake.pm:5261 printer/printerdrake.pm:5317
-#: printer/printerdrake.pm:5403 printer/printerdrake.pm:5412
+#: printer/printerdrake.pm:5284 printer/printerdrake.pm:5340
+#: printer/printerdrake.pm:5426 printer/printerdrake.pm:5435
 #, c-format
 msgid "Printer options"
 msgstr "Valg for skriver"
 
-#: printer/printerdrake.pm:5297
+#: printer/printerdrake.pm:5320
 #, c-format
 msgid "Modify printer configuration"
 msgstr "Endre skriveroppsett"
 
-#: printer/printerdrake.pm:5299
+#: printer/printerdrake.pm:5322
 #, c-format
 msgid ""
 "Printer %s%s\n"
@@ -15256,99 +15269,99 @@ msgstr ""
 "Skriver %s%s\n"
 "Hva ønsker du å forandre på denne skriveren?"
 
-#: printer/printerdrake.pm:5304
+#: printer/printerdrake.pm:5327
 #, c-format
 msgid "This printer is disabled"
 msgstr "Denne skriveren er deaktivert"
 
-#: printer/printerdrake.pm:5306
+#: printer/printerdrake.pm:5329
 #, c-format
 msgid "Do it!"
 msgstr "Gjør det!"
 
-#: printer/printerdrake.pm:5312 printer/printerdrake.pm:5377
+#: printer/printerdrake.pm:5335 printer/printerdrake.pm:5400
 #, c-format
 msgid "Printer name, description, location"
 msgstr "Skrivernavn, beskrivelse, plassering"
 
-#: printer/printerdrake.pm:5314 printer/printerdrake.pm:5396
+#: printer/printerdrake.pm:5337 printer/printerdrake.pm:5419
 #, c-format
 msgid "Printer manufacturer, model, driver"
 msgstr "Skriverprodusent, modell, driver"
 
-#: printer/printerdrake.pm:5315 printer/printerdrake.pm:5397
+#: printer/printerdrake.pm:5338 printer/printerdrake.pm:5420
 #, c-format
 msgid "Printer manufacturer, model"
 msgstr "Skriverprodusent, modell"
 
-#: printer/printerdrake.pm:5319 printer/printerdrake.pm:5407
+#: printer/printerdrake.pm:5342 printer/printerdrake.pm:5430
 #, c-format
 msgid "Set this printer as the default"
 msgstr "Sett denne skriveren som standard"
 
-#: printer/printerdrake.pm:5324 printer/printerdrake.pm:5413
-#: printer/printerdrake.pm:5415 printer/printerdrake.pm:5424
+#: printer/printerdrake.pm:5347 printer/printerdrake.pm:5436
+#: printer/printerdrake.pm:5438 printer/printerdrake.pm:5447
 #, c-format
 msgid "Enable Printer"
 msgstr "Aktiver skriver"
 
-#: printer/printerdrake.pm:5327 printer/printerdrake.pm:5418
-#: printer/printerdrake.pm:5419 printer/printerdrake.pm:5421
+#: printer/printerdrake.pm:5350 printer/printerdrake.pm:5441
+#: printer/printerdrake.pm:5442 printer/printerdrake.pm:5444
 #, c-format
 msgid "Disable Printer"
 msgstr "Deaktiver skriver"
 
-#: printer/printerdrake.pm:5331 printer/printerdrake.pm:5425
+#: printer/printerdrake.pm:5354 printer/printerdrake.pm:5448
 #, c-format
 msgid "Printer communication error handling"
 msgstr "Feilhåndtering ved skriverkommunikasjon"
 
-#: printer/printerdrake.pm:5332 printer/printerdrake.pm:5429
+#: printer/printerdrake.pm:5355 printer/printerdrake.pm:5452
 #, c-format
 msgid "Print test pages"
 msgstr "Skriver ut testsider"
 
-#: printer/printerdrake.pm:5333 printer/printerdrake.pm:5431
+#: printer/printerdrake.pm:5356 printer/printerdrake.pm:5454
 #, c-format
 msgid "Learn how to use this printer"
 msgstr "Lær hvordan man skal bruke denne skriveren"
 
-#: printer/printerdrake.pm:5334 printer/printerdrake.pm:5433
+#: printer/printerdrake.pm:5357 printer/printerdrake.pm:5456
 #, c-format
 msgid "Remove printer"
 msgstr "Fjern skriver"
 
-#: printer/printerdrake.pm:5385
+#: printer/printerdrake.pm:5408
 #, c-format
 msgid "Removing old printer \"%s\"..."
 msgstr "Fjerner gammel skriver \"%s\" ..."
 
-#: printer/printerdrake.pm:5416
+#: printer/printerdrake.pm:5439
 #, c-format
 msgid "Printer \"%s\" is now enabled."
 msgstr "Skriver «%s» er nå aktivert."
 
-#: printer/printerdrake.pm:5422
+#: printer/printerdrake.pm:5445
 #, c-format
 msgid "Printer \"%s\" is now disabled."
 msgstr "Skriver «%s» er nå deaktivert."
 
-#: printer/printerdrake.pm:5464
+#: printer/printerdrake.pm:5487
 #, c-format
 msgid "Do you really want to remove the printer \"%s\"?"
 msgstr "Ønsker du virkelig å fjerne skriveren \"%s\"?"
 
-#: printer/printerdrake.pm:5468
+#: printer/printerdrake.pm:5491
 #, c-format
 msgid "Removing printer \"%s\"..."
 msgstr "Fjerner skriver \"%s\"..."
 
-#: printer/printerdrake.pm:5492
+#: printer/printerdrake.pm:5515
 #, c-format
 msgid "Default printer"
 msgstr "Standardskriver"
 
-#: printer/printerdrake.pm:5493
+#: printer/printerdrake.pm:5516
 #, c-format
 msgid "The printer \"%s\" is set as the default printer now."
 msgstr "Skriveren \"%s\" er nå satt til standard skriver."
@@ -15385,15 +15398,15 @@ msgid "Could not set permissions of firmware file %s!"
 msgstr "Kunne ikke sette rettigheter på firmware-fil %s!"
 
 #: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
-#: standalone/scannerdrake:78 standalone/scannerdrake:346
-#: standalone/scannerdrake:382 standalone/scannerdrake:446
-#: standalone/scannerdrake:490 standalone/scannerdrake:494
-#: standalone/scannerdrake:516 standalone/scannerdrake:581
+#: standalone/scannerdrake:78 standalone/scannerdrake:321
+#: standalone/scannerdrake:370 standalone/scannerdrake:463
+#: standalone/scannerdrake:507 standalone/scannerdrake:511
+#: standalone/scannerdrake:533 standalone/scannerdrake:598
 #, c-format
 msgid "Scannerdrake"
 msgstr "Scannerdrake"
 
-#: scanner.pm:201 standalone/scannerdrake:947
+#: scanner.pm:201 standalone/scannerdrake:964
 #, c-format
 msgid "Could not install the packages needed to share your scanner(s)."
 msgstr "Kunne ikke installere pakkene som trengs for å dele din(e) skanner(e)."
@@ -17315,12 +17328,12 @@ msgstr "Logg ut og bruk så Ctrl-Alt-BackSpace"
 msgid "You need to log out and back in again for changes to take effect"
 msgstr "Du trenger å logge ut og inn igjen for at fendringene skal tre i kraft"
 
-#: standalone/drakTermServ:105 standalone/drakTermServ:111
+#: standalone/drakTermServ:112 standalone/drakTermServ:118
 #, c-format
 msgid "%s: %s requires a username...\n"
 msgstr "%s: %s krever et brukernavn...\n"
 
-#: standalone/drakTermServ:122
+#: standalone/drakTermServ:129
 #, c-format
 msgid ""
 "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
@@ -17329,114 +17342,114 @@ msgstr ""
 "%s: %s krever vertsnavn, MAC-adresse, IP, nbi-image, 0/1 for THIN_CLIENT, "
 "0/1 for Lokalt oppsett...\n"
 
-#: standalone/drakTermServ:128
+#: standalone/drakTermServ:135
 #, c-format
 msgid "%s: %s requires hostname...\n"
 msgstr "%s: %s trenger vertsnavn...\n"
 
-#: standalone/drakTermServ:138
+#: standalone/drakTermServ:144
 #, c-format
 msgid "Host name for client"
 msgstr ""
 
-#: standalone/drakTermServ:139
+#: standalone/drakTermServ:145
 #, c-format
 msgid "MAC address should be in the format 00:11:22:33:44:55"
 msgstr ""
 
-#: standalone/drakTermServ:140
+#: standalone/drakTermServ:146
 #, c-format
 msgid "IP address to be assigned to client"
 msgstr ""
 
-#: standalone/drakTermServ:141
+#: standalone/drakTermServ:147
 #, c-format
 msgid "Kernel/network adapter image to use to boot client"
 msgstr ""
 
-#: standalone/drakTermServ:142
+#: standalone/drakTermServ:148
 #, c-format
 msgid "Create masking files to allow configuration tools to run on client"
 msgstr ""
 
-#: standalone/drakTermServ:143
+#: standalone/drakTermServ:149
 #, c-format
 msgid "Applications will run on server machine"
 msgstr ""
 
-#: standalone/drakTermServ:226 standalone/drakTermServ:229
+#: standalone/drakTermServ:234 standalone/drakTermServ:237
 #, c-format
 msgid "Terminal Server Configuration"
 msgstr "Oppsett av terminaltjener"
 
-#: standalone/drakTermServ:235
+#: standalone/drakTermServ:243
 #, c-format
 msgid "dhcpd Config"
 msgstr "dhcpd-oppsett"
 
-#: standalone/drakTermServ:239
+#: standalone/drakTermServ:247
 #, c-format
 msgid "Enable Server"
 msgstr "Aktiver tjener"
 
-#: standalone/drakTermServ:245
+#: standalone/drakTermServ:253
 #, c-format
 msgid "Disable Server"
 msgstr "Deaktiver tjener"
 
-#: standalone/drakTermServ:251
+#: standalone/drakTermServ:259
 #, c-format
 msgid "Start Server"
 msgstr "Start tjener"
 
-#: standalone/drakTermServ:257
+#: standalone/drakTermServ:265
 #, c-format
 msgid "Stop Server"
 msgstr "Stopp tjener"
 
-#: standalone/drakTermServ:266
+#: standalone/drakTermServ:274
 #, c-format
 msgid "Etherboot Floppy/ISO"
 msgstr "Etherboot-diskett/ISO"
 
-#: standalone/drakTermServ:270
+#: standalone/drakTermServ:278
 #, c-format
 msgid "Net Boot Images"
 msgstr "Nettverksoppstart-imagefiler"
 
-#: standalone/drakTermServ:277
+#: standalone/drakTermServ:285
 #, c-format
 msgid "Add/Del Users"
 msgstr "Legg til/slett brukere"
 
-#: standalone/drakTermServ:281
+#: standalone/drakTermServ:289
 #, c-format
 msgid "Add/Del Clients"
 msgstr "Legg til/slett klienter"
 
-#: standalone/drakTermServ:289
+#: standalone/drakTermServ:297
 #, c-format
 msgid "Images"
 msgstr "Imagefiler"
 
-#: standalone/drakTermServ:290
+#: standalone/drakTermServ:298
 #, c-format
 msgid "Clients/Users"
 msgstr "Klienter/Brukere"
 
-#: standalone/drakTermServ:308 standalone/drakbug:47
+#: standalone/drakTermServ:316 standalone/drakbug:47
 #, c-format
 msgid "First Time Wizard"
 msgstr "Veiviser for første kjøring"
 
-#: standalone/drakTermServ:346 standalone/drakTermServ:347
+#: standalone/drakTermServ:354 standalone/drakTermServ:355
 #, c-format
 msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
 msgstr ""
 "%s er definert som innloggingshåndterer, legger til gdm-bruker i /etc/passwd$"
 "$CLIENT$$"
 
-#: standalone/drakTermServ:353
+#: standalone/drakTermServ:361
 #, c-format
 msgid ""
 "\n"
@@ -17477,27 +17490,27 @@ msgstr ""
 "    e) Spørre deg om å opprette en oppstartsdiskett.\n"
 "    f) Hvis det er tynne klienter, spørre om du vil starte KDM på nytt.\n"
 
-#: standalone/drakTermServ:399
+#: standalone/drakTermServ:407
 #, c-format
 msgid "Cancel Wizard"
 msgstr "Avbryt Veiviser"
 
-#: standalone/drakTermServ:414
+#: standalone/drakTermServ:422
 #, c-format
 msgid "Please save dhcpd config!"
 msgstr "Du må lagre dhcpd-oppsettet!"
 
-#: standalone/drakTermServ:442
+#: standalone/drakTermServ:450
 #, c-format
 msgid "Use thin clients."
 msgstr "Bruk tynne klienter."
 
-#: standalone/drakTermServ:444
+#: standalone/drakTermServ:452
 #, c-format
 msgid "Sync client X keyboard settings with server."
 msgstr "Synkroniserer klients X-tastaturoppsett med tjener."
 
-#: standalone/drakTermServ:446
+#: standalone/drakTermServ:454
 #, c-format
 msgid ""
 "Please select default client type (Fat is the default type if 'Use thin' is "
@@ -17512,28 +17525,28 @@ msgstr ""
 "skjerm.\n"
 "    'Tykke' klienter bruker deres egen CPU/RAM, men tjenerens filsystem."
 
-#: standalone/drakTermServ:466
+#: standalone/drakTermServ:474
 #, c-format
 msgid "Creating net boot images for all kernels"
 msgstr "Oppretter nettverksoppstartsfiler for alle kjerner"
 
-#: standalone/drakTermServ:467 standalone/drakTermServ:796
-#: standalone/drakTermServ:812
+#: standalone/drakTermServ:475 standalone/drakTermServ:807
+#: standalone/drakTermServ:823
 #, c-format
 msgid "This will take a few minutes."
 msgstr "Dette vil ta en stund."
 
-#: standalone/drakTermServ:473 standalone/drakTermServ:513
+#: standalone/drakTermServ:481 standalone/drakTermServ:521
 #, c-format
 msgid "Done!"
 msgstr "Ferdig!"
 
-#: standalone/drakTermServ:484 standalone/drakTermServ:883
+#: standalone/drakTermServ:492 standalone/drakTermServ:894
 #, c-format
 msgid "%s failed"
 msgstr "%s feilet"
 
-#: standalone/drakTermServ:493
+#: standalone/drakTermServ:501
 #, c-format
 msgid ""
 "Not enough space to create\n"
@@ -17544,12 +17557,12 @@ msgstr ""
 "NBIer i %s.\n"
 "Trenger: %d MB, Ledig: %d MB"
 
-#: standalone/drakTermServ:499
+#: standalone/drakTermServ:507
 #, c-format
 msgid "Syncing server user list with client list, including root."
 msgstr "Synkroniserer tjenerbrukerliste med klientliste, inkludert root."
 
-#: standalone/drakTermServ:519
+#: standalone/drakTermServ:527
 #, c-format
 msgid ""
 "In order to enable changes made for thin clients, the display manager must "
@@ -17558,19 +17571,18 @@ msgstr ""
 "For å kunne aktivere endringene gjort for tynne klienter, så må "
 "sesjonsbehandleren startes på nytt. Start på nytt nå?"
 
-#: standalone/drakTermServ:554
+#: standalone/drakTermServ:564
 #, c-format
 msgid "Terminal Server Overview"
 msgstr "Terminaltjeneroversikt"
 
-#: standalone/drakTermServ:555
+#: standalone/drakTermServ:565
 #, c-format
 msgid ""
 "        - Create Etherboot Enabled Boot Images:\n"
 "        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
 "be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
+"        \tmkinitrd-net does much of this work and %s is just a graphical \n"
 "        \tinterface to help manage/customize these images. To create the "
 "file \n"
 "        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
@@ -17581,8 +17593,7 @@ msgstr ""
 "        - Opprett Etherbootaktiverte oppstartsimagefiler:\n"
 "        \tFor å starte med en kjerne via etherboot, må en spesiell kjerne/"
 "initrd-imagefil opprettes.\n"
-"        \tmkinitrd-net gjør mye av dette arbeidet og drakTermServ er bare et "
-"grafisk \n"
+"        \tmkinitrd-net gjør mye av dette arbeidet og %s er bare et grafisk \n"
 "        \tgrensesnitt for å hjelpe til med å håndtere/endre på disse "
 "imagefilene. For å opprette filen \n"
 "        \t/etc/dhcpd.conf.etherboot-pcimap.include som blir dratt inn som en "
@@ -17590,14 +17601,14 @@ msgstr ""
 "        \tdhcpd.conf, så burde du opprette etherboot-imagefilene for i det "
 "minste en full kjerne."
 
-#: standalone/drakTermServ:561
+#: standalone/drakTermServ:571
 #, c-format
 msgid ""
 "        - Maintain /etc/dhcpd.conf:\n"
 "        \tTo net boot clients, each client needs a dhcpd.conf entry, "
 "assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
+"        \taddress and net boot images to the machine. %s helps create/"
+"remove \n"
 "        \tthese entries.\n"
 "\t\t\t\n"
 "        \t(PCI cards may omit the image - etherboot will request the correct "
@@ -17612,8 +17623,8 @@ msgstr ""
 "        - Vedlikehold /etc/dhcpd.conf:\n"
 "        \t\tFor å starte klientene over nettverk, trenger hver klient en "
 "oppføring i dhcpd.conf, som gir ut en IP-adresse\n"
-"        \t\tog nettverksoppstart-imagefiler til maskinen. drakTermServ "
-"hjelper til med å lage/fjerne disse opp føringene.\n"
+"        \t\tog nettverksoppstart-imagefiler til maskinen. %s hjelper til med "
+"å lage/fjerne disse opp føringene.\n"
 "\t\t\t\n"
 "        \t\t(PCI-kort kan unnlate imagefilen - etherboot vil forespørre den "
 "riktige imagefilen. Du burde\n"
@@ -17624,30 +17635,29 @@ msgstr ""
 "        \t\tEn typisk dhcpd.conf-strofe for å støtte diskløse klienter ser "
 "slik ut:"
 
-#: standalone/drakTermServ:579
-#, c-format
+#: standalone/drakTermServ:589
+#, fuzzy, c-format
 msgid ""
 "        While you can use a pool of IP addresses, rather than setup a "
 "specific entry for\n"
 "        a client machine, using a fixed address scheme facilitates using the "
 "functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
+"        of client-specific configuration files that %s provides.\n"
 "\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
+"        Note: The '#type' entry is only used by %s.  Clients can either be "
+"'thin'\n"
 "        or 'fat'.  Thin clients run most software on the server via XDMCP, "
 "while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
+"        most software on the client machine. A special inittab, \n"
+"        %s is written for thin clients. \n"
+"        System config files xdm-config, kdmrc, and gdm.conf are modified if "
+"thin clients are \n"
+"        used, to enable XDMCP. Since there are security issues in using "
+"XDMCP, hosts.deny and \n"
+"        hosts.allow are modified to limit access to the local subnet.\n"
 "\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
+"        Note: The '#hdw_config' entry is also only used by %s.  Clients can "
+"either \n"
 "        be 'true' or 'false'.  'true' enables root login at the client "
 "machine and allows local \n"
 "        hardware configuration of sound, mouse, and X, using the 'drak' "
@@ -17666,10 +17676,10 @@ msgstr ""
 "spesifikt satt opp oppføring for\n"
 "\t\t\ten klient maskin, ved bruk av faste adresseskjema som letter\n"
 "bruken\n"
-"\t\t\tav klientspesifike oppsettsfiler som ClusterNFS tilbyr.\n"
+"\t\t\tav klientspesifike oppsettsfiler som %s tilbyr.\n"
 "\t\t\t\n"
-"\t\t\tMerk: \"#type\"-oppføringen er bare brukt av drakTermServ.  Klienter "
-"kan enten være \"tynne\"\n"
+"\t\t\tMerk: \"#type\"-oppføringen er bare brukt av %s.  Klienter kan enten "
+"være \"tynne\"\n"
 "\t\t\teller 'tykke'.  Tynne klienter kjører mesteparten av programvaren via "
 "XDMCP, mens tykke klienter kjører mesteparten\n"
 "av programvaren på klientmaskinen. En spesiell inttab, %s blir\n"
@@ -17683,17 +17693,16 @@ msgstr ""
 "\t\t\tMerk: Du må stoppe/starte tjeneren etter å ha lagt til eller endret "
 "klienter."
 
-#: standalone/drakTermServ:599
+#: standalone/drakTermServ:609
 #, c-format
 msgid ""
 "        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
+"        \t%s allows export of the root filesystem to diskless clients. %s\n"
 "        \tsets up the correct entry to allow anonymous access to the root "
 "filesystem from\n"
 "        \tdiskless clients.\n"
 "\n"
-"        \tA typical exports entry for clusternfs is:\n"
+"        \tA typical exports entry for %s is:\n"
 "        \t\t\n"
 "        \t/\t\t\t\t\t(ro,all_squash)\n"
 "        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
@@ -17701,57 +17710,58 @@ msgid ""
 "        \tWith SUBNET/MASK being defined for your network."
 msgstr ""
 "        - Vedlikehold /etc/exports:\n"
-"        \t\tClusternfs lar deg eksportere root-filsystemet til diskløse "
-"klienter, drakTermServ\n"
+"        \t\t%s lar deg eksportere root-filsystemet til diskløse klienter, %"
+"s\n"
 "        \t\tsetter opp de riktige oppføringene for å tillate anonym tilgang "
 "til root-filsystemet fra\n"
 "        \t\tdiskløse klienter.\n"
 "\n"
-"        \t\tEn typisk eksporteringsoppføring for clusternfs er:\n"
+"        \t\tEn typisk eksporteringsoppføring for %s er:\n"
 "        \t\t\n"
 "        \t/\t\t\t\t\t(ro,all_squash)\n"
 "        \t\t/home              SUBNETT/MASKE(rw,root_squash)\n"
 "\t\t\t\n"
 "\t\t\tHvor SUBNETT/MASKE blir defintert for ditt nettverk."
 
-#: standalone/drakTermServ:611
-#, c-format
+#: standalone/drakTermServ:621
+#, fuzzy, c-format
 msgid ""
 "        - Maintain %s:\n"
 "        \tFor users to be able to log into the system from a diskless "
 "client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
+"        \t/etc/shadow needs to be duplicated in %s. \n"
+"        \t%s helps in this respect by adding or removing system users from "
+"this \n"
+"        \tfile."
 msgstr ""
 "        - Vedlikehold %s:\n"
 "        \t\tFor at brukere skal kunne logge inn på systemet fra en "
 "diskløsklient, så må deres entoppføring i\n"
-"        \t\t/etc/shadow kopieres inn i %s. drakTermServ hjelper til\n"
+"        \t\t/etc/shadow kopieres inn i %s. %s hjelper til\n"
 "        \t\tved å legge til og slette brukere fra denne filen."
 
-#: standalone/drakTermServ:615
+#: standalone/drakTermServ:626
 #, c-format
 msgid ""
 "        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
+"        \tThrough %s, each diskless client can have its own unique "
 "configuration files\n"
 "        \ton the root filesystem of the server. By allowing local client "
 "hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
+"        \t%s will help create these files."
 msgstr ""
 "        - Per klient %s:\n"
-"        \t\tGjennom clusternfs så kan hver diskløse klient ha deres egne "
-"unike oppsettsfil\n"
-"        \t\tpå root-filsystemet på tjeneren. I fremtiden vil drakTermServ "
-"kunne hjelpe til med å lage disse\n"
+"        \t\tGjennom %s så kan hver diskløse klient ha deres egne unike "
+"oppsettsfil\n"
+"        \t\tpå root-filsystemet på tjeneren. I fremtiden vil %s kunne hjelpe "
+"til med å lage disse\n"
 "        \t\tfilene."
 
-#: standalone/drakTermServ:620
+#: standalone/drakTermServ:631
 #, c-format
 msgid ""
 "        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
+"        \tThrough %s, each diskless client can have its own unique "
 "configuration files\n"
 "        \ton the root filesystem of the server. By allowing local client "
 "hardware configuration, \n"
@@ -17767,7 +17777,7 @@ msgid ""
 "machine is configured."
 msgstr ""
 "        - Systemoppsettsfiler per klient:\n"
-"        \t Gjennom clusternfs så har hver diskløse klient deres egne unike "
+"        \t Gjennom %s så har hver diskløse klient deres egne unike "
 "oppsettsfiler\n"
 "        \tpå tjenerens root-filesystem. Ved å tillate lokalt oppsett av "
 "klientens maskinvare, \n"
@@ -17782,12 +17792,12 @@ msgstr ""
 "        av igjen, og beholde oppsettsfilene så fort klientmaskinen er satt "
 "opp."
 
-#: standalone/drakTermServ:629
+#: standalone/drakTermServ:640
 #, c-format
 msgid ""
 "        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
+"        \t%s will configure this file to work in conjunction with the images "
+"created\n"
 "        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
 "the boot image to \n"
 "        \teach diskless client.\n"
@@ -17812,8 +17822,8 @@ msgid ""
 "        \tputs its images."
 msgstr ""
 "        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ vil configure denne filen til å virke sammen med "
-"imagefilene som blir opprettet av\n"
+"        \t\t%s vil configure denne filen til å virke sammen med imagefilene "
+"som blir opprettet av\n"
 "        \t\tmkinitrd-net, og oppføringene i /etc/dhcpd.conf, for å gi ut "
 "nettverksoppstartsimagefilene til hver \n"
 "        \t\tdiskløse klient.\n"
@@ -17837,14 +17847,12 @@ msgstr ""
 "net\n"
 "        \t\tplassere sine imagefiler."
 
-#: standalone/drakTermServ:650
-#, c-format
+#: standalone/drakTermServ:661
 msgid ""
 "        - Create etherboot floppies/CDs:\n"
 "        \tThe diskless client machines need either ROM images on the NIC, or "
 "a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help "
-"generate these\n"
+"        \tor CD to initiate the boot sequence. %s will help generate these\n"
 "        \timages, based on the NIC in the client machine.\n"
 "        \t\t\n"
 "        \tA basic example of creating a boot floppy for a 3Com 3c509 "
@@ -17855,8 +17863,8 @@ msgstr ""
 "        - Opprett etherboot-disketter/CDer:\n"
 "        \tDe diskløse klientmaskinene trenger enten ROM-imagefil på "
 "nettverkskortet, oppstartsdiskett\n"
-"        \teller en CD for å initialisere oppstartssekvensen.  drakTermServ "
-"vil hjelpe til med å generere disse\n"
+"        \teller en CD for å initialisere oppstartssekvensen.  %s vil hjelpe "
+"til med å generere disse\n"
 "        \timagefilene, basert på nettverkskortet i klientmaskinen.\n"
 "        \t\t\n"
 "        \tEt grunnleggende eksempel på oppretting av en oppstartsdiskett for "
@@ -17864,94 +17872,94 @@ msgstr ""
 "        \t\t\n"
 "        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
 
-#: standalone/drakTermServ:683
+#: standalone/drakTermServ:694
 #, c-format
 msgid "Boot Floppy"
 msgstr "Oppstarts-diskett"
 
-#: standalone/drakTermServ:685
+#: standalone/drakTermServ:696
 #, c-format
 msgid "Boot ISO"
 msgstr "Oppstarts-ISO"
 
-#: standalone/drakTermServ:687
+#: standalone/drakTermServ:698
 #, c-format
 msgid "PXE Image"
 msgstr "PXE-imagefil"
 
-#: standalone/drakTermServ:748
+#: standalone/drakTermServ:759
 #, c-format
 msgid "Default kernel version"
 msgstr "Standard kjerneversjon"
 
-#: standalone/drakTermServ:753
+#: standalone/drakTermServ:764
 #, c-format
 msgid "Create PXE images"
 msgstr ""
 
-#: standalone/drakTermServ:754
+#: standalone/drakTermServ:765
 #, c-format
 msgid "Use Unionfs (TS2)"
 msgstr ""
 
-#: standalone/drakTermServ:784
+#: standalone/drakTermServ:795
 #, c-format
 msgid "Install i586 kernel for older clients"
 msgstr "Installer i586-kjerne for eldre klienter"
 
-#: standalone/drakTermServ:794
+#: standalone/drakTermServ:805
 #, c-format
 msgid "Build Whole Kernel -->"
 msgstr "Bygg hele kjernen -->"
 
-#: standalone/drakTermServ:801
+#: standalone/drakTermServ:812
 #, c-format
 msgid "No kernel selected!"
 msgstr "Ingen kjerne valgt!"
 
-#: standalone/drakTermServ:804
+#: standalone/drakTermServ:815
 #, c-format
 msgid "Build Single NIC -->"
 msgstr "Bygg for et enkelt nettverkskort -->"
 
-#: standalone/drakTermServ:808 standalone/drakTermServ:1631
+#: standalone/drakTermServ:819 standalone/drakTermServ:1643
 #, c-format
 msgid "No NIC selected!"
 msgstr "Inget nettverkskort valgt!"
 
-#: standalone/drakTermServ:811
+#: standalone/drakTermServ:822
 #, c-format
 msgid "Build All Kernels -->"
 msgstr "Bygg alle kjerner -->"
 
-#: standalone/drakTermServ:824
+#: standalone/drakTermServ:835
 #, c-format
 msgid ""
 "Custom\n"
 "kernel args"
 msgstr ""
 
-#: standalone/drakTermServ:829
+#: standalone/drakTermServ:840
 #, c-format
 msgid "<-- Delete"
 msgstr "<-- Slett"
 
-#: standalone/drakTermServ:834
+#: standalone/drakTermServ:845
 #, c-format
 msgid "No image selected!"
 msgstr "Imagefil ikke valgt!"
 
-#: standalone/drakTermServ:837
+#: standalone/drakTermServ:848
 #, c-format
 msgid "Delete All NBIs"
 msgstr "Slett alle NBIer"
 
-#: standalone/drakTermServ:914
+#: standalone/drakTermServ:925
 #, c-format
 msgid "Building images for kernel:"
 msgstr "Oppretter imagefiler for kjerne:"
 
-#: standalone/drakTermServ:1038
+#: standalone/drakTermServ:1050
 #, c-format
 msgid ""
 "!!! Indicates the password in the system database is different than\n"
@@ -17962,27 +17970,27 @@ msgstr ""
 " det i terminalserver-databasen.\n"
 "Slett/legg til bruker på nytt i terminalserveren for å aktivere innlogging."
 
-#: standalone/drakTermServ:1043
+#: standalone/drakTermServ:1055
 #, c-format
 msgid "Add User -->"
 msgstr "Legg til bruker -->"
 
-#: standalone/drakTermServ:1049
+#: standalone/drakTermServ:1061
 #, c-format
 msgid "<-- Del User"
 msgstr "<-- Slett bruker"
 
-#: standalone/drakTermServ:1085
+#: standalone/drakTermServ:1097
 #, c-format
 msgid "type: %s"
 msgstr "type: %s"
 
-#: standalone/drakTermServ:1089
+#: standalone/drakTermServ:1101
 #, c-format
 msgid "local config: %s"
 msgstr "lokalt oppsett: %s"
 
-#: standalone/drakTermServ:1124
+#: standalone/drakTermServ:1136
 #, c-format
 msgid ""
 "Allow local hardware\n"
@@ -17991,22 +17999,22 @@ msgstr ""
 "Tillatt lokalt\n"
 "maskinvareoppsett'."
 
-#: standalone/drakTermServ:1134
+#: standalone/drakTermServ:1146
 #, c-format
 msgid "No net boot images created!"
 msgstr "Ingen nettverksoppstartsfiler ble laget!"
 
-#: standalone/drakTermServ:1153
+#: standalone/drakTermServ:1165
 #, c-format
 msgid "Thin Client"
 msgstr "Tynn klient"
 
-#: standalone/drakTermServ:1157
+#: standalone/drakTermServ:1169
 #, c-format
 msgid "Allow Thin Clients"
 msgstr "Tillat tynne klienter"
 
-#: standalone/drakTermServ:1158
+#: standalone/drakTermServ:1170
 #, c-format
 msgid ""
 "Sync client X keyboard\n"
@@ -18015,52 +18023,52 @@ msgstr ""
 "Synkroniser klients X-tastatur\n"
 " instillinger med tjener."
 
-#: standalone/drakTermServ:1159
+#: standalone/drakTermServ:1171
 #, c-format
 msgid "Add Client -->"
 msgstr "Legg til klient -->"
 
-#: standalone/drakTermServ:1169
+#: standalone/drakTermServ:1181
 #, c-format
 msgid "Unknown MAC address format"
 msgstr ""
 
-#: standalone/drakTermServ:1183
+#: standalone/drakTermServ:1195
 #, c-format
 msgid "type: fat"
 msgstr "type: tykk"
 
-#: standalone/drakTermServ:1184
+#: standalone/drakTermServ:1196
 #, c-format
 msgid "type: thin"
 msgstr "type: tynn"
 
-#: standalone/drakTermServ:1191
+#: standalone/drakTermServ:1203
 #, c-format
 msgid "local config: false"
 msgstr "lokalt oppsett: falsk"
 
-#: standalone/drakTermServ:1192
+#: standalone/drakTermServ:1204
 #, c-format
 msgid "local config: true"
 msgstr "lokalt oppsett: sann"
 
-#: standalone/drakTermServ:1200
+#: standalone/drakTermServ:1212
 #, c-format
 msgid "<-- Edit Client"
 msgstr "<-- Endre klient"
 
-#: standalone/drakTermServ:1225
+#: standalone/drakTermServ:1237
 #, c-format
 msgid "Disable Local Config"
 msgstr "Deaktiver lokalt oppsett"
 
-#: standalone/drakTermServ:1232
+#: standalone/drakTermServ:1244
 #, c-format
 msgid "Delete Client"
 msgstr "Slett klient"
 
-#: standalone/drakTermServ:1255
+#: standalone/drakTermServ:1267
 #, c-format
 msgid ""
 "Need to restart the Display Manager for full changes to take effect. \n"
@@ -18070,79 +18078,79 @@ msgstr ""
 "i kraft. \n"
 "(service dm restart - i konsollet)"
 
-#: standalone/drakTermServ:1300
+#: standalone/drakTermServ:1313
 #, c-format
 msgid "Thin clients will not work with autologin. Disable autologin?"
 msgstr ""
 "Tynne klienter vil ikke fungere med automatisk innlogging. Deaktiver "
 "automatisk innlogging?"
 
-#: standalone/drakTermServ:1316
+#: standalone/drakTermServ:1328
 #, c-format
 msgid "All clients will use %s"
 msgstr "Alle klienter vil bruke %s"
 
-#: standalone/drakTermServ:1350
+#: standalone/drakTermServ:1362
 #, c-format
 msgid "Subnet:"
 msgstr "Subnett:"
 
-#: standalone/drakTermServ:1357
+#: standalone/drakTermServ:1369
 #, c-format
 msgid "Netmask:"
 msgstr "Nettmaske:"
 
-#: standalone/drakTermServ:1364
+#: standalone/drakTermServ:1376
 #, c-format
 msgid "Routers:"
 msgstr "Routere:"
 
-#: standalone/drakTermServ:1371
+#: standalone/drakTermServ:1383
 #, c-format
 msgid "Subnet Mask:"
 msgstr "Subnettmaske:"
 
-#: standalone/drakTermServ:1378
+#: standalone/drakTermServ:1390
 #, c-format
 msgid "Broadcast Address:"
 msgstr "Broadcastadresse:"
 
-#: standalone/drakTermServ:1385
+#: standalone/drakTermServ:1397
 #, c-format
 msgid "Domain Name:"
 msgstr "Domenenavn:"
 
-#: standalone/drakTermServ:1393
+#: standalone/drakTermServ:1405
 #, c-format
 msgid "Name Servers:"
 msgstr "Navntjenere:"
 
-#: standalone/drakTermServ:1404
+#: standalone/drakTermServ:1416
 #, c-format
 msgid "IP Range Start:"
 msgstr "IP-rekke start:"
 
-#: standalone/drakTermServ:1405
+#: standalone/drakTermServ:1417
 #, c-format
 msgid "IP Range End:"
 msgstr "IP-rekke slutt:"
 
-#: standalone/drakTermServ:1447
+#: standalone/drakTermServ:1459
 #, c-format
 msgid "Append TS Includes To Existing Config"
 msgstr "Legg til TS-includes i eksisterende oppsett"
 
-#: standalone/drakTermServ:1449
+#: standalone/drakTermServ:1461
 #, c-format
 msgid "Write Config"
 msgstr "Skriv oppsett"
 
-#: standalone/drakTermServ:1465
+#: standalone/drakTermServ:1477
 #, c-format
 msgid "dhcpd Server Configuration"
 msgstr "dhcpd-tjeneroppsett"
 
-#: standalone/drakTermServ:1466
+#: standalone/drakTermServ:1478
 #, c-format
 msgid ""
 "Most of these values were extracted\n"
@@ -18153,7 +18161,7 @@ msgstr ""
 "ut fra ditt system.\n"
 "Du kan endre dem etter behov."
 
-#: standalone/drakTermServ:1469
+#: standalone/drakTermServ:1481
 #, c-format
 msgid ""
 "Dynamic IP Address Pool\n"
@@ -18162,100 +18170,100 @@ msgstr ""
 "Dynamisk IP-adresserekke\n"
 "(trengs for PXE-klienter):"
 
-#: standalone/drakTermServ:1622
+#: standalone/drakTermServ:1634
 #, c-format
 msgid "Write to %s failed!"
 msgstr "Skriving til %s feilet!"
 
-#: standalone/drakTermServ:1635
+#: standalone/drakTermServ:1647
 #, c-format
 msgid "Please insert floppy disk:"
 msgstr "Sett inn en diskett:"
 
-#: standalone/drakTermServ:1639
+#: standalone/drakTermServ:1651
 #, c-format
 msgid "Could not access the floppy!"
 msgstr "Kunne ikke få tilgang til diskettstasjonen!"
 
-#: standalone/drakTermServ:1641
+#: standalone/drakTermServ:1653
 #, c-format
 msgid "Floppy can be removed now"
 msgstr "Disketten kan fjernes nå"
 
-#: standalone/drakTermServ:1644
+#: standalone/drakTermServ:1656
 #, c-format
 msgid "No floppy drive available!"
 msgstr "Ingen diskettstasjon tilgjengelig!"
 
-#: standalone/drakTermServ:1650
+#: standalone/drakTermServ:1662
 #, c-format
 msgid "PXE image is %s/%s"
 msgstr "PXE-imagefil er %s/%s"
 
-#: standalone/drakTermServ:1652
+#: standalone/drakTermServ:1664
 #, c-format
 msgid "Error writing %s/%s"
 msgstr "Feil ved skriving %s/%s"
 
-#: standalone/drakTermServ:1664
+#: standalone/drakTermServ:1676
 #, c-format
 msgid "Etherboot ISO image is %s"
 msgstr "Etheroppstart ISO-imagefil er %s"
 
-#: standalone/drakTermServ:1668
+#: standalone/drakTermServ:1680
 #, c-format
 msgid "Something went wrong! - Is mkisofs installed?"
 msgstr "Noe gikk feil! - Er mkisofs installert?"
 
-#: standalone/drakTermServ:1688
+#: standalone/drakTermServ:1700
 #, c-format
 msgid "Need to create /etc/dhcpd.conf first!"
 msgstr "Trenger å opprette /etc/dhcpd.conf først!"
 
-#: standalone/drakTermServ:1847
+#: standalone/drakTermServ:1867
 #, c-format
 msgid "%s passwd bad in Terminal Server - rewriting...\n"
 msgstr "%s passord feil i Terminaltjener - skriver om...\n"
 
-#: standalone/drakTermServ:1860
+#: standalone/drakTermServ:1880
 #, c-format
 msgid "%s is not a user..\n"
 msgstr "%s er ikke en bruker..\n"
 
-#: standalone/drakTermServ:1861
+#: standalone/drakTermServ:1881
 #, c-format
 msgid "%s is already a Terminal Server user\n"
 msgstr "%s er allerede en Terminaltjenerbruker\n"
 
-#: standalone/drakTermServ:1863
+#: standalone/drakTermServ:1883
 #, c-format
 msgid "Addition of %s to Terminal Server failed!\n"
 msgstr "Klarte ikke å legge %s til i Terminaltjener!\n"
 
-#: standalone/drakTermServ:1865
+#: standalone/drakTermServ:1885
 #, c-format
 msgid "%s added to Terminal Server\n"
 msgstr "%s lagt til Terminaltjener\n"
 
-#: standalone/drakTermServ:1882
+#: standalone/drakTermServ:1903
 #, c-format
 msgid "Deleted %s...\n"
 msgstr "Slettet %s...\n"
 
-#: standalone/drakTermServ:1884 standalone/drakTermServ:1957
+#: standalone/drakTermServ:1905 standalone/drakTermServ:1978
 #, c-format
 msgid "%s not found...\n"
 msgstr "%s ikke funnet...\n"
 
-#: standalone/drakTermServ:1985
+#: standalone/drakTermServ:2006
 #, c-format
 msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
 msgstr "/etc/hosts.allow og /etc/hosts.deny er allerede satt opp - ikke endret"
 
-#: standalone/drakTermServ:2125
+#: standalone/drakTermServ:2158
 #, c-format
-msgid "Configuration changed - restart clusternfs/dhcpd?"
-msgstr "Oppsett endret - restarte clusternfs/dhcpd?"
+msgid "Configuration changed - restart %s/dhcpd?"
+msgstr "Oppsett endret - restarte %s/dhcpd?"
 
 #: standalone/drakautoinst:38 standalone/drakhosts:123
 #: standalone/drakhosts:129 standalone/draknfs:84 standalone/draknfs:105
@@ -26471,17 +26479,17 @@ msgstr ""
 msgid "Scannerdrake will not be started now."
 msgstr "Scannerdrake vil ikke bli startet nå."
 
-#: standalone/scannerdrake:67 standalone/scannerdrake:491
+#: standalone/scannerdrake:67 standalone/scannerdrake:508
 #, c-format
 msgid "Searching for configured scanners..."
 msgstr "Søker etter oppsatte skannere ..."
 
-#: standalone/scannerdrake:71 standalone/scannerdrake:495
+#: standalone/scannerdrake:71 standalone/scannerdrake:512
 #, c-format
 msgid "Searching for new scanners..."
 msgstr "Søker etter nye scannere..."
 
-#: standalone/scannerdrake:79 standalone/scannerdrake:517
+#: standalone/scannerdrake:79 standalone/scannerdrake:534
 #, c-format
 msgid "Re-generating list of configured scanners..."
 msgstr "Re-genererer liste over oppsatte skannere ..."
@@ -26645,43 +26653,43 @@ msgstr ""
 "%s må være satt opp av printerdrake.\n"
 "Du kan kjøre %s Kontrollsenter fra maskinvareseksjonen."
 
-#: standalone/scannerdrake:308 standalone/scannerdrake:315
-#: standalone/scannerdrake:345
+#: standalone/scannerdrake:322
+#, c-format
+msgid "Setting up kernel modules..."
+msgstr "Setter opp kjernemoduler..."
+
+#: standalone/scannerdrake:332 standalone/scannerdrake:339
+#: standalone/scannerdrake:369
 #, c-format
 msgid "Auto-detect available ports"
 msgstr "Oppdag automisk tilgjengelige porter"
 
-#: standalone/scannerdrake:310 standalone/scannerdrake:356
+#: standalone/scannerdrake:334 standalone/scannerdrake:380
 #, c-format
 msgid "Please select the device where your %s is attached"
 msgstr "Velg enheten hvor din %s er tilkoblet"
 
-#: standalone/scannerdrake:311
+#: standalone/scannerdrake:335
 #, c-format
 msgid "(Note: Parallel ports cannot be auto-detected)"
 msgstr "(Merk: Parallellporter kan ikke bli automatisk oppdaget)"
 
-#: standalone/scannerdrake:313 standalone/scannerdrake:358
+#: standalone/scannerdrake:337 standalone/scannerdrake:382
 #, c-format
 msgid "choose device"
 msgstr "velg enhet"
 
-#: standalone/scannerdrake:347
+#: standalone/scannerdrake:371
 #, c-format
 msgid "Searching for scanners..."
 msgstr "Søker etter scannere..."
 
-#: standalone/scannerdrake:383
-#, c-format
-msgid "Setting up kernel modules..."
-msgstr "Setter opp kjernemoduler..."
-
-#: standalone/scannerdrake:390 standalone/scannerdrake:397
+#: standalone/scannerdrake:407 standalone/scannerdrake:414
 #, c-format
 msgid "Attention!"
 msgstr "OBS!"
 
-#: standalone/scannerdrake:391
+#: standalone/scannerdrake:408
 #, c-format
 msgid ""
 "Your %s cannot be configured fully automatically.\n"
@@ -26693,7 +26701,7 @@ msgstr ""
 "\n"
 "Manuelle tilpasninger kreves. Rediger oppsettsfila /etc/sane.d/%s.conf. "
 
-#: standalone/scannerdrake:392 standalone/scannerdrake:401
+#: standalone/scannerdrake:409 standalone/scannerdrake:418
 #, c-format
 msgid ""
 "More info in the driver's manual page. Run the command \"man sane-%s\" to "
@@ -26702,7 +26710,7 @@ msgstr ""
 "Mer informasjon i driverens manualside. Kjør kommandoen \"man sane-%s\" for "
 "å lese den."
 
-#: standalone/scannerdrake:394 standalone/scannerdrake:403
+#: standalone/scannerdrake:411 standalone/scannerdrake:420
 #, c-format
 msgid ""
 "After that you may scan documents using \"XSane\" or \"Kooka\" from "
@@ -26711,7 +26719,7 @@ msgstr ""
 "Etter det så skal du kunne skanne dokumenter dine ved hjelp av \"XSane\" "
 "eller \"Kooka\" fra Multimedia/Grafikk i applikasjonsmenyen."
 
-#: standalone/scannerdrake:398
+#: standalone/scannerdrake:415
 #, c-format
 msgid ""
 "Your %s has been configured, but it is possible that additional manual "
@@ -26720,7 +26728,7 @@ msgstr ""
 "Din %s har blitt satt opp, men det er mulig at manuelle endringer må gjøres "
 "i tillegg for å få det til å fungere. "
 
-#: standalone/scannerdrake:399
+#: standalone/scannerdrake:416
 #, c-format
 msgid ""
 "If it does not appear in the list of configured scanners in the main window "
@@ -26729,12 +26737,12 @@ msgstr ""
 "Hvis den ikke dukker opp i listen over oppsatte scannere i hovedvinduet til "
 "Scannerdrake eller hvis den ikke virker riktig, "
 
-#: standalone/scannerdrake:400
+#: standalone/scannerdrake:417
 #, c-format
 msgid "edit the configuration file /etc/sane.d/%s.conf. "
 msgstr "endre oppsettsfilen /etc/sane.d/%s.conf."
 
-#: standalone/scannerdrake:406
+#: standalone/scannerdrake:423
 #, c-format
 msgid ""
 "Your %s has been configured.\n"
@@ -26745,7 +26753,7 @@ msgstr ""
 "Du vil nå kunne skanne dokumentene dine ved hjelp av \"XSane\" eller \"Kooka"
 "\" fra Multimedia/Grafikk i applikasjonsmenyen."
 
-#: standalone/scannerdrake:431
+#: standalone/scannerdrake:448
 #, c-format
 msgid ""
 "The following scanners\n"
@@ -26758,7 +26766,7 @@ msgstr ""
 "%s\n"
 "er tilgjengelige på ditt system.\n"
 
-#: standalone/scannerdrake:432
+#: standalone/scannerdrake:449
 #, c-format
 msgid ""
 "The following scanner\n"
@@ -26771,43 +26779,43 @@ msgstr ""
 "%s\n"
 "er tilgjengelig på ditt system.\n"
 
-#: standalone/scannerdrake:435 standalone/scannerdrake:438
+#: standalone/scannerdrake:452 standalone/scannerdrake:455
 #, c-format
 msgid "There are no scanners found which are available on your system.\n"
 msgstr ""
 "Det ble ikke funnet noen scannere som er tilgjengelig på ditt system.\n"
 
-#: standalone/scannerdrake:452
+#: standalone/scannerdrake:469
 #, c-format
 msgid "Search for new scanners"
 msgstr "Søk etter nye scannere"
 
-#: standalone/scannerdrake:458
+#: standalone/scannerdrake:475
 #, c-format
 msgid "Add a scanner manually"
 msgstr "Legg til scanner manuelt"
 
-#: standalone/scannerdrake:465
+#: standalone/scannerdrake:482
 #, c-format
 msgid "Install/Update firmware files"
 msgstr "Installer/Oppdater firmware-filer"
 
-#: standalone/scannerdrake:471
+#: standalone/scannerdrake:488
 #, c-format
 msgid "Scanner sharing"
 msgstr "Scannerdeling"
 
-#: standalone/scannerdrake:530 standalone/scannerdrake:695
+#: standalone/scannerdrake:547 standalone/scannerdrake:712
 #, c-format
 msgid "All remote machines"
 msgstr "Alle fjerne maskiner"
 
-#: standalone/scannerdrake:542 standalone/scannerdrake:845
+#: standalone/scannerdrake:559 standalone/scannerdrake:862
 #, c-format
 msgid "This machine"
 msgstr "Denne maskinen"
 
-#: standalone/scannerdrake:582
+#: standalone/scannerdrake:599
 #, c-format
 msgid ""
 "Here you can choose whether the scanners connected to this machine should be "
@@ -26816,7 +26824,7 @@ msgstr ""
 "Her kan du velge om scannerne tilkoblet denne maskinen skal være "
 "tilgjengelige for andre maskiner og for hvilke."
 
-#: standalone/scannerdrake:583
+#: standalone/scannerdrake:600
 #, c-format
 msgid ""
 "You can also decide here whether scanners on remote machines should be made "
@@ -26825,33 +26833,33 @@ msgstr ""
 "Du kan også velge om fjernskannere kan bli gjort tilgjengelige på denne "
 "maskinen."
 
-#: standalone/scannerdrake:586
+#: standalone/scannerdrake:603
 #, c-format
 msgid "The scanners on this machine are available to other computers"
 msgstr "Scannerne på denne maskinen er tilgjengelig for andre maskiner"
 
-#: standalone/scannerdrake:588
+#: standalone/scannerdrake:605
 #, c-format
 msgid "Scanner sharing to hosts: "
 msgstr "Scannerdeling til verter: "
 
-#: standalone/scannerdrake:602
+#: standalone/scannerdrake:619
 #, c-format
 msgid "Use scanners on remote computers"
 msgstr "Bruk scannere på fjerne maskiner"
 
-#: standalone/scannerdrake:605
+#: standalone/scannerdrake:622
 #, c-format
 msgid "Use the scanners on hosts: "
 msgstr "Bruk scannere på verter: "
 
-#: standalone/scannerdrake:632 standalone/scannerdrake:704
-#: standalone/scannerdrake:854
+#: standalone/scannerdrake:649 standalone/scannerdrake:721
+#: standalone/scannerdrake:871
 #, c-format
 msgid "Sharing of local scanners"
 msgstr "Deling av lokale scannere"
 
-#: standalone/scannerdrake:633
+#: standalone/scannerdrake:650
 #, c-format
 msgid ""
 "These are the machines on which the locally connected scanner(s) should be "
@@ -26860,56 +26868,56 @@ msgstr ""
 "Dette er maskiner som de(n) lokalt tilkoblede scanneren(e) skal være "
 "tilgjengelig(e) for:"
 
-#: standalone/scannerdrake:644 standalone/scannerdrake:794
+#: standalone/scannerdrake:661 standalone/scannerdrake:811
 #, c-format
 msgid "Add host"
 msgstr "Legg til vert"
 
-#: standalone/scannerdrake:650 standalone/scannerdrake:800
+#: standalone/scannerdrake:667 standalone/scannerdrake:817
 #, c-format
 msgid "Edit selected host"
 msgstr "Endre valgte vert"
 
-#: standalone/scannerdrake:659 standalone/scannerdrake:809
+#: standalone/scannerdrake:676 standalone/scannerdrake:826
 #, c-format
 msgid "Remove selected host"
 msgstr "Fjern valgte vert"
 
-#: standalone/scannerdrake:683 standalone/scannerdrake:691
-#: standalone/scannerdrake:696 standalone/scannerdrake:742
-#: standalone/scannerdrake:833 standalone/scannerdrake:841
-#: standalone/scannerdrake:846 standalone/scannerdrake:892
+#: standalone/scannerdrake:700 standalone/scannerdrake:708
+#: standalone/scannerdrake:713 standalone/scannerdrake:759
+#: standalone/scannerdrake:850 standalone/scannerdrake:858
+#: standalone/scannerdrake:863 standalone/scannerdrake:909
 #, c-format
 msgid "Name/IP address of host:"
 msgstr "Navn/IP-adresse på vert"
 
-#: standalone/scannerdrake:705 standalone/scannerdrake:855
+#: standalone/scannerdrake:722 standalone/scannerdrake:872
 #, c-format
 msgid "Choose the host on which the local scanners should be made available:"
 msgstr ""
 "Velg verten som de(n) lokale scanneren(e) skal bli gjort tilgjengelig(e) for:"
 
-#: standalone/scannerdrake:716 standalone/scannerdrake:866
+#: standalone/scannerdrake:733 standalone/scannerdrake:883
 #, c-format
 msgid "You must enter a host name or an IP address.\n"
 msgstr "Du må spesifisere vertsnavn eller en IP-adresse.\n"
 
-#: standalone/scannerdrake:727 standalone/scannerdrake:877
+#: standalone/scannerdrake:744 standalone/scannerdrake:894
 #, c-format
 msgid "This host is already in the list, it cannot be added again.\n"
 msgstr "Denne verten er allerede i listen, den kan ikke bli lagt til igjen.\n"
 
-#: standalone/scannerdrake:782
+#: standalone/scannerdrake:799
 #, c-format
 msgid "Usage of remote scanners"
 msgstr "Bruk av fjerne scannere"
 
-#: standalone/scannerdrake:783
+#: standalone/scannerdrake:800
 #, c-format
 msgid "These are the machines from which the scanners should be used:"
 msgstr "Dette er maskinene som scanneren skal kunne bli brukt fra:"
 
-#: standalone/scannerdrake:940
+#: standalone/scannerdrake:957
 #, c-format
 msgid ""
 "saned needs to be installed to share the local scanner(s).\n"
@@ -26920,7 +26928,7 @@ msgstr ""
 "\n"
 "Vil du installere saned-pakka?"
 
-#: standalone/scannerdrake:944 standalone/scannerdrake:948
+#: standalone/scannerdrake:961 standalone/scannerdrake:965
 #, c-format
 msgid "Your scanner(s) will not be available on the network."
 msgstr "Din(e) skanner(e) vil ikke være tilgjengelig(e) på nettverket."
@@ -27104,6 +27112,297 @@ msgstr ""
 msgid "Installation failed"
 msgstr "Installasjon feilet"
 
+#, fuzzy
+#~ msgid "Cancel setup"
+#~ msgstr "Avbryt"
+
+#~ msgid ""
+#~ "        - Create Etherboot Enabled Boot Images:\n"
+#~ "        \tTo boot a kernel via etherboot, a special kernel/initrd image "
+#~ "must be created.\n"
+#~ "        \tmkinitrd-net does much of this work and drakTermServ is just a "
+#~ "graphical \n"
+#~ "        \tinterface to help manage/customize these images. To create the "
+#~ "file \n"
+#~ "        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as "
+#~ "an include in \n"
+#~ "        \tdhcpd.conf, you should create the etherboot images for at least "
+#~ "one full kernel."
+#~ msgstr ""
+#~ "        - Opprett Etherbootaktiverte oppstartsimagefiler:\n"
+#~ "        \tFor å starte med en kjerne via etherboot, må en spesiell kjerne/"
+#~ "initrd-imagefil opprettes.\n"
+#~ "        \tmkinitrd-net gjør mye av dette arbeidet og drakTermServ er bare "
+#~ "et grafisk \n"
+#~ "        \tgrensesnitt for å hjelpe til med å håndtere/endre på disse "
+#~ "imagefilene. For å opprette filen \n"
+#~ "        \t/etc/dhcpd.conf.etherboot-pcimap.include som blir dratt inn som "
+#~ "en \"include\" i \n"
+#~ "        \tdhcpd.conf, så burde du opprette etherboot-imagefilene for i "
+#~ "det minste en full kjerne."
+
+#~ msgid ""
+#~ "        - Maintain /etc/dhcpd.conf:\n"
+#~ "        \tTo net boot clients, each client needs a dhcpd.conf entry, "
+#~ "assigning an IP \n"
+#~ "        \taddress and net boot images to the machine. drakTermServ helps "
+#~ "create/remove \n"
+#~ "        \tthese entries.\n"
+#~ "\t\t\t\n"
+#~ "        \t(PCI cards may omit the image - etherboot will request the "
+#~ "correct image. \n"
+#~ "\t\t\tYou should also consider that when etherboot looks for the images, "
+#~ "it expects \n"
+#~ "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk."
+#~ "nbi).\n"
+#~ "\t\t\t \n"
+#~ "        \tA typical dhcpd.conf stanza to support a diskless client looks "
+#~ "like:"
+#~ msgstr ""
+#~ "        - Vedlikehold /etc/dhcpd.conf:\n"
+#~ "        \t\tFor å starte klientene over nettverk, trenger hver klient en "
+#~ "oppføring i dhcpd.conf, som gir ut en IP-adresse\n"
+#~ "        \t\tog nettverksoppstart-imagefiler til maskinen. drakTermServ "
+#~ "hjelper til med å lage/fjerne disse opp føringene.\n"
+#~ "\t\t\t\n"
+#~ "        \t\t(PCI-kort kan unnlate imagefilen - etherboot vil forespørre "
+#~ "den riktige imagefilen. Du burde\n"
+#~ "        \t\togså vurdere det når etherboot ser etter imagefilene, den "
+#~ "forventer navn som\n"
+#~ "        \t\tboot-3c59x.nbi, framfor boot-3c59x.2.4.19-16mdk.nbi).\n"
+#~ "\t\t\t \n"
+#~ "        \t\tEn typisk dhcpd.conf-strofe for å støtte diskløse klienter "
+#~ "ser slik ut:"
+
+#~ msgid ""
+#~ "        While you can use a pool of IP addresses, rather than setup a "
+#~ "specific entry for\n"
+#~ "        a client machine, using a fixed address scheme facilitates using "
+#~ "the functionality\n"
+#~ "        of client-specific configuration files that ClusterNFS provides.\n"
+#~ "\t\t\t\n"
+#~ "        Note: The '#type' entry is only used by drakTermServ.  Clients "
+#~ "can either be 'thin'\n"
+#~ "        or 'fat'.  Thin clients run most software on the server via "
+#~ "XDMCP, while fat clients run \n"
+#~ "        most software on the client machine. A special inittab, %s is\n"
+#~ "        written for thin clients. System config files xdm-config, kdmrc, "
+#~ "and gdm.conf are \n"
+#~ "        modified if thin clients are used, to enable XDMCP. Since there "
+#~ "are security issues in \n"
+#~ "        using XDMCP, hosts.deny and hosts.allow are modified to limit "
+#~ "access to the local\n"
+#~ "        subnet.\n"
+#~ "\t\t\t\n"
+#~ "        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
+#~ "Clients can either \n"
+#~ "        be 'true' or 'false'.  'true' enables root login at the client "
+#~ "machine and allows local \n"
+#~ "        hardware configuration of sound, mouse, and X, using the 'drak' "
+#~ "tools. This is enabled \n"
+#~ "        by creating separate config files associated with the client's IP "
+#~ "address and creating \n"
+#~ "        read/write mount points to allow the client to alter the file. "
+#~ "Once you are satisfied \n"
+#~ "        with the configuration, you can remove root login privileges from "
+#~ "the client.\n"
+#~ "\t\t\t\n"
+#~ "        Note: You must stop/start the server after adding or changing "
+#~ "clients."
+#~ msgstr ""
+#~ "\t\t\tMens du kan bruke en brønn av IP-adresse, framfor å sette opp en "
+#~ "spesifikt satt opp oppføring for\n"
+#~ "\t\t\ten klient maskin, ved bruk av faste adresseskjema som letter\n"
+#~ "bruken\n"
+#~ "\t\t\tav klientspesifike oppsettsfiler som ClusterNFS tilbyr.\n"
+#~ "\t\t\t\n"
+#~ "\t\t\tMerk: \"#type\"-oppføringen er bare brukt av drakTermServ.  "
+#~ "Klienter kan enten være \"tynne\"\n"
+#~ "\t\t\teller 'tykke'.  Tynne klienter kjører mesteparten av programvaren "
+#~ "via XDMCP, mens tykke klienter kjører mesteparten\n"
+#~ "av programvaren på klientmaskinen. En spesiell inttab, %s blir\n"
+#~ "\t\t\tskrevet for tynne klienter. Systemoppsettsfilene xdm-config, kdmrc, "
+#~ "og gdm.conf blir endret på\n"
+#~ "\t\t\thvis tynne klienter blir brukt, for å aktivere XDMCP. Siden det er "
+#~ "sikkerhetsproblematikk rundt bruken av XDMCP,\n"
+#~ "\t\t\tså blir hosts.deny og hosts.allow endret for å begrense tilgangen "
+#~ "til det lokale subnettet.\n"
+#~ "\t\t\t\n"
+#~ "\t\t\tMerk: Du må stoppe/starte tjeneren etter å ha lagt til eller endret "
+#~ "klienter."
+
+#~ msgid ""
+#~ "        - Maintain /etc/exports:\n"
+#~ "        \tClusternfs allows export of the root filesystem to diskless "
+#~ "clients. drakTermServ\n"
+#~ "        \tsets up the correct entry to allow anonymous access to the root "
+#~ "filesystem from\n"
+#~ "        \tdiskless clients.\n"
+#~ "\n"
+#~ "        \tA typical exports entry for clusternfs is:\n"
+#~ "        \t\t\n"
+#~ "        \t/\t\t\t\t\t(ro,all_squash)\n"
+#~ "        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
+#~ "\t\t\t\n"
+#~ "        \tWith SUBNET/MASK being defined for your network."
+#~ msgstr ""
+#~ "        - Vedlikehold /etc/exports:\n"
+#~ "        \t\tClusternfs lar deg eksportere root-filsystemet til diskløse "
+#~ "klienter, drakTermServ\n"
+#~ "        \t\tsetter opp de riktige oppføringene for å tillate anonym "
+#~ "tilgang til root-filsystemet fra\n"
+#~ "        \t\tdiskløse klienter.\n"
+#~ "\n"
+#~ "        \t\tEn typisk eksporteringsoppføring for clusternfs er:\n"
+#~ "        \t\t\n"
+#~ "        \t/\t\t\t\t\t(ro,all_squash)\n"
+#~ "        \t\t/home              SUBNETT/MASKE(rw,root_squash)\n"
+#~ "\t\t\t\n"
+#~ "\t\t\tHvor SUBNETT/MASKE blir defintert for ditt nettverk."
+
+#~ msgid ""
+#~ "        - Maintain %s:\n"
+#~ "        \tFor users to be able to log into the system from a diskless "
+#~ "client, their entry in\n"
+#~ "        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
+#~ "        \thelps in this respect by adding or removing system users from "
+#~ "this file."
+#~ msgstr ""
+#~ "        - Vedlikehold %s:\n"
+#~ "        \t\tFor at brukere skal kunne logge inn på systemet fra en "
+#~ "diskløsklient, så må deres entoppføring i\n"
+#~ "        \t\t/etc/shadow kopieres inn i %s. drakTermServ hjelper til\n"
+#~ "        \t\tved å legge til og slette brukere fra denne filen."
+
+#~ msgid ""
+#~ "        - Per client %s:\n"
+#~ "        \tThrough clusternfs, each diskless client can have its own "
+#~ "unique configuration files\n"
+#~ "        \ton the root filesystem of the server. By allowing local client "
+#~ "hardware configuration, \n"
+#~ "        \tdrakTermServ will help create these files."
+#~ msgstr ""
+#~ "        - Per klient %s:\n"
+#~ "        \t\tGjennom clusternfs så kan hver diskløse klient ha deres egne "
+#~ "unike oppsettsfil\n"
+#~ "        \t\tpå root-filsystemet på tjeneren. I fremtiden vil drakTermServ "
+#~ "kunne hjelpe til med å lage disse\n"
+#~ "        \t\tfilene."
+
+#~ msgid ""
+#~ "        - Per client system configuration files:\n"
+#~ "        \tThrough clusternfs, each diskless client can have its own "
+#~ "unique configuration files\n"
+#~ "        \ton the root filesystem of the server. By allowing local client "
+#~ "hardware configuration, \n"
+#~ "        \tclients can customize files such as /etc/modules.conf, /etc/"
+#~ "sysconfig/mouse, \n"
+#~ "        \t/etc/sysconfig/keyboard on a per-client basis.\n"
+#~ "\n"
+#~ "        Note: Enabling local client hardware configuration does enable "
+#~ "root login to the terminal \n"
+#~ "        server on each client machine that has this feature enabled.  "
+#~ "Local configuration can be\n"
+#~ "        turned back off, retaining the configuration files, once the "
+#~ "client machine is configured."
+#~ msgstr ""
+#~ "        - Systemoppsettsfiler per klient:\n"
+#~ "        \t Gjennom clusternfs så har hver diskløse klient deres egne "
+#~ "unike oppsettsfiler\n"
+#~ "        \tpå tjenerens root-filesystem. Ved å tillate lokalt oppsett av "
+#~ "klientens maskinvare, \n"
+#~ "        \tså kan klienter skreddersy filer som /etc/modules.conf, /etc/ "
+#~ "sysconfig/mouse, \n"
+#~ "        \t/etc/sysconfig/keyboard på per-klient-basis\n"
+#~ "\n"
+#~ "        Merk: Aktivering av maskinvareoppsett for lokale klienter "
+#~ "aktiverer ikke root-innlogging på terminaltjeneren\n"
+#~ "        for hver klientmaskin som har denne finessen aktivert.  Lokalt "
+#~ "oppsett kan bli skrudd\n"
+#~ "        av igjen, og beholde oppsettsfilene så fort klientmaskinen er "
+#~ "satt opp."
+
+#~ msgid ""
+#~ "        - /etc/xinetd.d/tftp:\n"
+#~ "        \tdrakTermServ will configure this file to work in conjunction "
+#~ "with the images created\n"
+#~ "        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve "
+#~ "up the boot image to \n"
+#~ "        \teach diskless client.\n"
+#~ "\n"
+#~ "        \tA typical TFTP configuration file looks like:\n"
+#~ "        \t\t\n"
+#~ "        \tservice tftp\n"
+#~ "\t\t\t{\n"
+#~ "                        disable         = no\n"
+#~ "                        socket_type  = dgram\n"
+#~ "                        protocol        = udp\n"
+#~ "                        wait             = yes\n"
+#~ "                        user             = root\n"
+#~ "                        server          = /usr/sbin/in.tftpd\n"
+#~ "                        server_args  = -s /var/lib/tftpboot\n"
+#~ "        \t}\n"
+#~ "        \t\t\n"
+#~ "        \tThe changes here from the default installation are changing the "
+#~ "disable flag to\n"
+#~ "        \t'no' and changing the directory path to /var/lib/tftpboot, "
+#~ "where mkinitrd-net\n"
+#~ "        \tputs its images."
+#~ msgstr ""
+#~ "        - /etc/xinetd.d/tftp:\n"
+#~ "        \t\tdrakTermServ vil configure denne filen til å virke sammen med "
+#~ "imagefilene som blir opprettet av\n"
+#~ "        \t\tmkinitrd-net, og oppføringene i /etc/dhcpd.conf, for å gi ut "
+#~ "nettverksoppstartsimagefilene til hver \n"
+#~ "        \t\tdiskløse klient.\n"
+#~ "\n"
+#~ "        \t\tEn typisk TFTP-oppsettsfil ser slik ut:\n"
+#~ "        \t\t\n"
+#~ "        \tservice tftp\n"
+#~ "\t\t\t{\n"
+#~ "                        disable         = no\n"
+#~ "                        socket_type  = dgram\n"
+#~ "                        protocol        = udp\n"
+#~ "                        wait             = yes\n"
+#~ "                        user             = root\n"
+#~ "                        server          = /usr/sbin/in.tftpd\n"
+#~ "                        server_args  = -s /var/lib/tftpboot\n"
+#~ "        \t}\n"
+#~ "        \t\t\n"
+#~ "        \t\tForandringen her fra den vanlige installasjonen er "
+#~ "forandringen av disable-flagget til\n"
+#~ "        \t\t'no' og endring av filbanen til /var/lib/tftpboot, hvor "
+#~ "mkinitrd-net\n"
+#~ "        \t\tplassere sine imagefiler."
+
+#~ msgid ""
+#~ "        - Create etherboot floppies/CDs:\n"
+#~ "        \tThe diskless client machines need either ROM images on the NIC, "
+#~ "or a boot floppy\n"
+#~ "        \tor CD to initiate the boot sequence.  drakTermServ will help "
+#~ "generate these\n"
+#~ "        \timages, based on the NIC in the client machine.\n"
+#~ "        \t\t\n"
+#~ "        \tA basic example of creating a boot floppy for a 3Com 3c509 "
+#~ "manually:\n"
+#~ "        \t\t\n"
+#~ "        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
+#~ msgstr ""
+#~ "        - Opprett etherboot-disketter/CDer:\n"
+#~ "        \tDe diskløse klientmaskinene trenger enten ROM-imagefil på "
+#~ "nettverkskortet, oppstartsdiskett\n"
+#~ "        \teller en CD for å initialisere oppstartssekvensen.  "
+#~ "drakTermServ vil hjelpe til med å generere disse\n"
+#~ "        \timagefilene, basert på nettverkskortet i klientmaskinen.\n"
+#~ "        \t\t\n"
+#~ "        \tEt grunnleggende eksempel på oppretting av en oppstartsdiskett "
+#~ "for et 3Com 3509 manuelt::\n"
+#~ "        \t\t\n"
+#~ "        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
+
+#~ msgid "Configuration changed - restart clusternfs/dhcpd?"
+#~ msgstr "Oppsett endret - restarte clusternfs/dhcpd?"
+
 #~ msgid ""
 #~ "The following media have been found and will be used during install: %s.\n"
 #~ "\n"