updated pot file

1 files changed, 18177 insertions, 0 deletions

diff --git a/perl-install/share/po/ms.po b/perl-install/share/po/ms.po
new file mode 100644
index 000000000..111a51e3a
--- /dev/null
+++ b/perl-install/share/po/ms.po
@@ -0,0 +1,18177 @@
+# DrakX Bahasa Melayu (Malay) (ms).
+# Copyright (C) 2003 Free Software Foundation, Inc.
+# Sharuzzaman Ahmat Raslan <sharuzzaman@myrealbox.com>, 2003
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: DrakX\n"
+"POT-Creation-Date: 2003-09-09 17:07+0200\n"
+"PO-Revision-Date: 2003-08-20 19:30+0800\n"
+"Last-Translator: Sharuzzaman Ahmat Raslan <sharuzzaman@myrealbox.com>\n"
+"Language-Team: Malay <translation-team-ms@lists.sourceforge.net>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.0\n"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "Mengimbas partisyen untuk mencari titik lekapan"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr "jika tetap kepada ya, periksa penambahan/pembuangan fail suid root."
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
+"0/1 for Local Config...\n"
+msgstr ""
+"%s: %s memerlukan namahos, alamat MAC, IP, imej-nbi, 0/1 untuk THIN_CLIENT, "
+"0/1 untuk Local Config...\n"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Configuration changed - restart clusternfs/dhcpd?"
+msgstr "Konfigurasi berubah - mulakan semula clusternfs/dhcpd?"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr "\t\tPadam=%s"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Differential backups only save files that have changed or are new since the "
+"original 'base' backup."
+msgstr ""
+"Backup berkala hanya menyimpan fail yang telah berubah atau baru semenjak "
+"backup 'induk' asal"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "port pencetak rangkaian"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "Sila masukkan cakera liut:"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "DrakTermServ"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ""
+"The backup partition table has not the same size\n"
+"Still continue?"
+msgstr ""
+"Jadual partisyen backup tidak mempunyai saiz yang sama\n"
+"Masih teruskan?"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Which username"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Which type of entry do you want to add?"
+msgstr ""
+
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Configure hostname..."
+msgstr "Internet."
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr ""
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid ""
+"The current security level is %s\n"
+"Select permissions to see/edit"
+msgstr ""
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr ""
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Jenis"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
+msgstr "fail."
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Sri Lanka"
+msgstr "Sri Lanka"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Central African Republic"
+msgstr "Republik Afrika Tengah"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "Gateway device"
+msgstr "Peranti gateway"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Advanced preferences"
+msgstr "Keutamaan lanjutan"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Net Method:"
+msgstr ""
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Ethernetcard"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "If set, send the mail report to this email address else send it to root"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Parameters"
+msgstr "Parameter"
+
+#: ../../standalone/draksec:1
+#, c-format
+msgid "no"
+msgstr "tidak"
+
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Auto-detect"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface:"
+msgstr "Antaramuka:"
+
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr ""
+
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr "Internet."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr "Sambung dan Tetingkap?"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "Belarus"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Error writing to file %s"
+msgstr "Ralat menulis kepada fail %s"
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Report check result to syslog"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
+msgstr "dan."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use tape to backup"
+msgstr ""
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "The following packages are going to be installed"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "CUPS configuration"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Total progress"
+msgstr "Jumlah"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Hong Kong"
+msgstr "Hong Kong"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Not enough free space to allocate new partitions"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
+
+#: ../../standalone/draksec:1
+#, c-format
+msgid "yes"
+msgstr "ya"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "("
+msgstr ""
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr "Selamat Datang Rangkaian Konfigurasikan"
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#, c-format
+msgid ")"
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Lebanon"
+msgstr "Lebanon"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "MM HitTablet"
+msgstr ""
+
+#: ../../services.pm:1
+#, c-format
+msgid "Stop"
+msgstr "Henti"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Edit selected host"
+msgstr "Edit hos dipilih"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No CD device defined!"
+msgstr "Tidak!"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "\tUse .backupignore files\n"
+msgstr "fail"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Bulgarian (phonetic)"
+msgstr ""
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "The DHCP start ip"
+msgstr "DHCP mula"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "256 kB"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Don't rewind tape after backup"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Bootloader main options"
+msgstr "PemuatBoot utama"
+
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
+msgstr ""
+
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#, c-format
+msgid "Tape"
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Malaysia"
+msgstr "Malaysia"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Scanning network..."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
+"\n"
+" direktori."
+
+#: ../../standalone/drakedm:1
+#, fuzzy, c-format
+msgid "The change is done, do you want to restart the dm service ?"
+msgstr "siap ulanghidup?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Swiss (French layout)"
+msgstr "Swiss (susunatur Perancis)"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "August"
+msgstr ""
+
+#: ../../raid.pm:1
+#, c-format
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr ""
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Webcam"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "size of the (second level) cpu cache"
+msgstr ""
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Soundcard"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Month"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Search for files to restore"
+msgstr "Cari fail"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Luxembourg"
+msgstr "Luxembourg"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr "Kepada fail<file>"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Level %s\n"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Syriac (phonetic)"
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Iran"
+msgstr "Iran"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Bus"
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Iraq"
+msgstr "Iraq"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "dalam"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Configuring..."
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "siap dan dihidupkan."
+
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr "dan."
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Password (again)"
+msgstr "Katalaluan"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Search installed fonts"
+msgstr "Cari"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Default desktop"
+msgstr "Default"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Venezuela"
+msgstr "Venezuela"
+
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "IP address"
+msgstr "Alamat IP"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Choose the sizes"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid ""
+"Can only be mounted explicitly (i.e.,\n"
+"the -a option will not cause the file system to be mounted)."
+msgstr "terpasang fail terpasang."
+
+#: ../../network/modem.pm:1
+#, c-format
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose another partition"
+msgstr ""
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Current user"
+msgstr ""
+
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username"
+msgstr "Namapengguna"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Left \"Windows\" key"
+msgstr "Kiri Tetingkap"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Guyana"
+msgstr "Guyana"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "dhcpd Server Configuration"
+msgstr "Pelayan"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
+"direktori\n"
+" direktori fail dalam direktori"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr "on"
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Printer Name"
+msgstr "Giliran"
+
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Remove a module"
+msgstr "Buang"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Password"
+msgstr "Katalaluan"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Advanced Configuration"
+msgstr "Lanjutan"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning on your HP multi-function device"
+msgstr "on"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Root"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Choose an existing RAID to add to"
+msgstr "RAD"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Turki"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Lilo message not found"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr "dalam"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "if needed"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Failed..."
+msgstr "Gagal."
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "/Autodetect _jazz drives"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Store the password for this system in drakbackup configuration."
+msgstr "dalam."
+
+#: ../../install_messages.pm:1
+#, fuzzy, c-format
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and  \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License,  you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of  the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of  "
+"downloading software components \n"
+"from one of Mandrake Linux sites  which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities.  Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A.  \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A.  \n"
+msgstr ""
+"Pengenalan dan dalam dan dan dan A dalam dan dan dalam dan dan dan tidak A "
+"dalam tidak dan dan keluar A A dalam tidak keluar dan keluar dalam lokal "
+"dalam dan dan Umum dan A Dokumentasi A Kanan: dan dan A dalam dan dan A dan "
+"Perancis on keluar Perancis on A"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Default user"
+msgstr "Default"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Current interface configuration"
+msgstr ""
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPD - Line Printer Daemon"
+msgstr ""
+
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr "on dan"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do not print any test page"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Gurmukhi"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "%s already in use\n"
+msgstr "dalam"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Force No APIC"
+msgstr "Tidak"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+
+#: ../../standalone.pm:1
+#, c-format
+msgid "[keyboard]"
+msgstr ""
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "FTP proxy"
+msgstr "FTP"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Install List"
+msgstr "Install"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr "Ubah"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Show only for the selected day"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\tLimit disk usage to %s MB\n"
+msgstr ""
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "512 kB"
+msgstr ""
+
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "Logs"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "port"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>N"
+msgstr ""
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "What kind of card do you have?"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>O"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Security"
+msgstr "Keselamatan"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr "dan KDE on"
+
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/printerdrake:1
+#, c-format
+msgid "<control>Q"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Unable to find backups to restore...\n"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown"
+msgstr "Entah"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr "dalam"
+
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "Network Configuration"
+msgstr "Konfigurasi Rangkaian"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr ""
+
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid ""
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
+msgstr "Protokol Saluran"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be a number!"
+msgstr ""
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Notice"
+msgstr "Notis"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr "on."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"file list sent by FTP: %s\n"
+" "
+msgstr "fail FTP "
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Interface"
+msgstr "Antaramuka"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Multisession CD"
+msgstr ""
+
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "comma separated strings"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Messages"
+msgstr ""
+
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Entah"
+
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "POP and IMAP Server"
+msgstr "dan"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Mexico"
+msgstr "Mexico"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "Model"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Rwanda"
+msgstr "Rwanda"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Switzerland"
+msgstr "Switzerland"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Brunei Darussalam"
+msgstr "Brunei Darussalam"
+
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Do you have any %s interfaces?"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "You must be root to read configuration file. \n"
+msgstr "fail"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote lpd Printer Options"
+msgstr "lpd"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
+"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
+msgstr ""
+"pengguna pengguna fail dan on pengguna fail dan on pengguna dalam dan A "
+"pengguna dalam dan pengguna default dan pengguna tidak fail on Tambah "
+"pengguna default pengguna default pengguna dalam dan lokal pengguna dan "
+"dalam."
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Configure Internet Access..."
+msgstr "Internet."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please choose the time interval between each backup"
+msgstr ""
+
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Norway"
+msgstr "Norway"
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Delete profile"
+msgstr "Padam"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Danish"
+msgstr "Danish"
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr "on."
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr "IP IP dalam."
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr "on on dan."
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "When checked, owner and group won't be changed"
+msgstr "dan"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Bulgaria"
+msgstr "Bulgaria"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Tuesday"
+msgstr ""
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Processors"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbard and Jan Mayen Islands"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "Tidak!"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "partition %s is now known as %s"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Other files..."
+msgstr "Lain-lain fail."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Congo (Kinshasa)"
+msgstr "Kongo"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "SMB server IP"
+msgstr "SMB"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Partisyen!"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Installing HPOJ package..."
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr "A on normal on A"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"                      DrakBackup Daemon Report\n"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Latvian"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "monthly"
+msgstr ""
+
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Module name"
+msgstr "Modul"
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Start at boot"
+msgstr "Mula"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Incremental Backups"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "First sector of drive (MBR)"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "El Salvador"
+msgstr "El Salvador"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Joystick"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "DVD"
+msgstr ""
+
+#: ../../any.pm:1 ../../help.pm:1
+#, c-format
+msgid "Use Unicode by default"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Trying to rescue partition table"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be an integer number!"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Use password to authenticate users"
+msgstr ""
+
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid ""
+"Entries you'll have to fill:\n"
+"%s"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"For backups to other media, files are still created on the hard drive, then "
+"moved to the other media.  Enabling this option will remove the hard drive "
+"tar files after the backup."
+msgstr "fail on fail."
+
+#: ../../standalone/livedrake:1
+#, fuzzy, c-format
+msgid "Unable to start live upgrade !!!\n"
+msgstr "mula"
+
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Name: "
+msgstr "Nama: "
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "16 million colors (24 bits)"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Allow all users"
+msgstr ""
+
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "The official MandrakeSoft Store"
+msgstr ""
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Enter the maximum size\n"
+" allowed for Drakbackup (MB)"
+msgstr "Enter\n"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr ""
+
+#: ../../standalone/drakperm:1 ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "User"
+msgstr "Pengguna"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Name"
+msgstr "Nama"
+
+#: ../../raid.pm:1
+#, c-format
+msgid "mkraid failed"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Button 3 Emulation"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Check additions/removals of sgid files"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files..."
+msgstr "fail."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Israeli (Phonetic)"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to rpm tools"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "You must choose/enter a printer/device!"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Permission problem accessing CD."
+msgstr ""
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Phone number"
+msgstr ""
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Ralat"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer name, description, location"
+msgstr ""
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (broadcast)"
+msgstr ""
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Use Xinerama extension"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Loopback"
+msgstr ""
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "West Europe"
+msgstr "Barat"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "On CD-R"
+msgstr "pada CDROM"
+
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid ""
+"[OPTIONS] [PROGRAM_NAME]\n"
+"\n"
+"OPTIONS:\n"
+"  --help            - print this help message.\n"
+"  --report          - program should be one of mandrake tools\n"
+"  --incident        - program should be one of mandrake tools"
+msgstr ""
+"NAMA\n"
+"\n"
+"\n"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Harddrake2 version %s"
+msgstr ""
+
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Preferences"
+msgstr "Keutamaan"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Swaziland"
+msgstr "Swaziland"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Dominican Republic"
+msgstr "Republik Dominica"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Copying %s"
+msgstr ""
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Choose color"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Syriac"
+msgstr ""
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Set-UID"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
+msgstr "dalam on dan!"
+
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, fuzzy, c-format
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "dan."
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Enable \"%s\" to execute the file"
+msgstr ""
+
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "Generic 2 Button Mouse"
+msgstr "Generik"
+
+#: ../../lvm.pm:1
+#, fuzzy, c-format
+msgid "Remove the logical volumes first\n"
+msgstr "Buang"
+
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, fuzzy, c-format
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "dalam saat."
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid ""
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Internet access"
+msgstr "Internet"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid ""
+"y coordinate of text box\n"
+"in number of characters"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
+msgstr "Kepada on."
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing test page(s)..."
+msgstr "Cetakan."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr ""
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "Enable/Disable msec hourly security check."
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to decide where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space you will\n"
+"have to partition the drive. Basically, partitioning a hard drive consists\n"
+"of logically dividing it to create the space needed to install your new\n"
+"Mandrake Linux system.\n"
+"\n"
+"Because the process of partitioning a hard drive is usually irreversible\n"
+"and can lead to lost data if there is an existing operating system already\n"
+"installed on the drive, partitioning can be intimidating and stressful if\n"
+"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
+"simplifies this process. Before continuing with this step, read through the\n"
+"rest of this section and above all, take your time.\n"
+"\n"
+"Depending on your hard drive configuration, several options are available:\n"
+"\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
+"\n"
+"   Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"then when you started. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software.\n"
+"\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
+"\n"
+"   !! If you choose this option, all data on your disk will be deleted. !!\n"
+"\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
+"\n"
+"   !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
+msgstr ""
+"on kosong on dan pengguna dan on\n"
+" tidak\n"
+" on default dan\n"
+" Tetingkap on dan on Kepada Tetingkap dan Tetingkap Tetingkap dan dan on\n"
+" Tetingkap\n"
+" dan on dan\n"
+" on\n"
+" on dan Semua on\n"
+" on\n"
+" secara manual dan siap dan on dalam."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Ukraine"
+msgstr "Ukraine"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Application:"
+msgstr ""
+
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "External ISDN modem"
+msgstr "Luaran"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "if set to yes, report check result by mail."
+msgstr "ya."
+
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Your choice? (default %s) "
+msgstr "default "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
+"\n"
+msgstr "Ujian"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "daily"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and one unknown printer"
+msgstr "dan tidak diketahui"
+
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Ireland"
+msgstr "Ireland"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "         Restore Configuration       "
+msgstr ""
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You will now set up your Internet/network connection. If you wish to\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
+"\n"
+"When configuring your network, the available connections options are:\n"
+"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
+"simple LAN connection (Ethernet).\n"
+"\n"
+"We will not detail each configuration option - just make sure that you have\n"
+"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
+"from your Internet Service Provider or system administrator.\n"
+"\n"
+"You can consult the ``Starter Guide'' chapter about Internet connections\n"
+"for details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection."
+msgstr ""
+"Internet Internet lokal dan dalam dan IP default Internet Internet dan."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Wizard Configuration"
+msgstr ""
+
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Autoprobe"
+msgstr ""
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+"if set to yes, check for :\n"
+"\n"
+"- empty passwords,\n"
+"\n"
+"- no password in /etc/shadow\n"
+"\n"
+"- for users with the 0 id other than root."
+msgstr "ya kosong tidak dalam."
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system files..."
+msgstr "fail."
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Can't use broadcast with no NIS domain"
+msgstr "tidak NIS"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing printer \"%s\"..."
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Shell history size"
+msgstr ""
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "drakfloppy"
+msgstr ""
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid ""
+"Please indicate where the auto_install.cfg file is located.\n"
+"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
+"\n"
+msgstr "fail"
+
+#: ../../printer/cups.pm:1 ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Configured on other machines"
+msgstr "Tidak"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Peru"
+msgstr "Peru"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " on device: %s"
+msgstr "on"
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows(TM)"
+msgstr "Buang Tetingkap"
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Font Pelayan."
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Select the font file or directory and click on 'Add'"
+msgstr "fail direktori dan on Tambah"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Madagascar"
+msgstr "Madagascar"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Urpmi"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Cron not available yet as non-root"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "System"
+msgstr "Sistem"
+
+#: ../../any.pm:1 ../../help.pm:1
+#, c-format
+msgid "Do you want to use this feature?"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Arabic"
+msgstr "Arab"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"- Options:\n"
+msgstr "Pilihan"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Password required"
+msgstr "Katalaluan"
+
+#: ../../common.pm:1
+#, c-format
+msgid "%d minutes"
+msgstr ""
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, fuzzy, c-format
+msgid "Graphics card: %s"
+msgstr "Grafik"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "WebDAV transfer failed!"
+msgstr ""
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree configuration"
+msgstr ""
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Choose action"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "French Polynesia"
+msgstr "French Polynesia"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
+msgstr "tidak on dan dan bersiri USB default dan dan dan dan on dan on."
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "dan."
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Files or wildcards listed in a .backupignore file at the top of a directory "
+"tree will not be backed up."
+msgstr "dalam fail direktori."
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Lanjutan Bunyi"
+
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Installing driver for %s card %s"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr "default default?"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Enable Server"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Ukrainian"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr "dan dan."
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Enable \"%s\" to write the file"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "dalam"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Local network(s)"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Buang"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr "Multimedia Grafik dalam."
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Firewire controllers"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
+msgstr "on dan dan dalam!"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "System mode"
+msgstr "Sistem"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
+msgstr "Kepada on IP dan pengguna dan."
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Netmask:"
+msgstr "Netmask:"
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "Do it later"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Append"
+msgstr "Tambah"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr "Segarkan"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
+msgstr "on on off."
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
+msgstr "on"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Network printer \"%s\", port %s"
+msgstr "Rangkaian"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr "Rangkaian."
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "OK to restore the other files."
+msgstr "OK fail."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please choose your keyboard layout."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer Device URI"
+msgstr "Peranti RAID"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not erasable media!"
+msgstr ""
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Terminal-based"
+msgstr ""
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "Enable/Disable IP spoofing protection."
+msgstr "IP."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing a printing system in the %s security level"
+msgstr "dalam"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "The user name is too long"
+msgstr "pengguna"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Other OS (windows...)"
+msgstr "Lain-lain"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "WebDAV remote site already in sync!"
+msgstr "dalam!"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Reading printer database..."
+msgstr "Membaca."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Generate auto install floppy"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
+msgstr "pengguna on"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Somalia"
+msgstr "Somalia"
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "No open source driver"
+msgstr "Tidak"
+
+#: ../../standalone/printerdrake:1
+#, c-format
+msgid "Def."
+msgstr ""
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid ""
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr "dan."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Nicaragua"
+msgstr "Nicaragua"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "New Caledonia"
+msgstr "New Caledonia"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "European protocol (EDSS1)"
+msgstr ""
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "/_Delete"
+msgstr "Hapus"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Video mode"
+msgstr "Video"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Oman"
+msgstr "Oman"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Please enter your email address below "
+msgstr ""
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Network Monitoring"
+msgstr "Rangkaian"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "SunOS"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "New size in MB: "
+msgstr "Baru dalam "
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Partition table type: %s\n"
+msgstr "Partisyen"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Authentication Windows Domain"
+msgstr "Pengesahan Tetingkap"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "US keyboard"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Buttons emulation"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ", network printer \"%s\", port %s"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"Drakbackup activities via tape:\n"
+"\n"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
+"\n"
+" FTP fail FTP"
+
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "Sending Speed:"
+msgstr ""
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid ""
+"The classic bug sound tester is to run the following commands:\n"
+"\n"
+"\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
+"by default\n"
+"\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
+"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
+"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
+"\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"\n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+msgstr "default dan dan on"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Halt bug"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Mail alert configuration"
+msgstr "Mel"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Tokelau"
+msgstr "Tokelau"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Matching"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Bosnian"
+msgstr ""
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Release: "
+msgstr ""
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Connection speed"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Namibia"
+msgstr "Namibia"
+
+#: ../../services.pm:1
+#, c-format
+msgid "Database Server"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr "dan"
+
+#: ../../raid.pm:1
+#, fuzzy, c-format
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "RAD"
+
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr "dalam."
+
+#: ../../standalone/draksec:1
+#, c-format
+msgid "Please wait, setting security options..."
+msgstr ""
+
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Entah"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Launch the graphical environment when your system starts"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "hourly"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Right Shift key"
+msgstr "Kanan Shif"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "          Successfuly Restored on %s       "
+msgstr "on "
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Making printer port available for CUPS..."
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Antigua and Barbuda"
+msgstr "dan"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
+"dalam\n"
+" dalam Pelayan pengguna Pelayan."
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Spanish"
+msgstr "Spanyol"
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Start"
+msgstr "Mula"
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Direct root login"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring applications..."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"Please plug in and turn on all printers connected to this machine so that it/"
+"they can be auto-detected. Also your network printer(s) and your Windows "
+"machines must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"Tetingkap dalam dan on dan Tetingkap dan on on off dan Tetingkap\n"
+" on Berikutnya dan on Batal."
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Normal modem connection"
+msgstr ""
+
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "File Selection"
+msgstr "Fail"
+
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
+#, c-format
+msgid "CUPS"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Erase tape before backup"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Run config tool"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Bootloader installation"
+msgstr "PemuatBoot"
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Root partition size in MB: "
+msgstr "dalam "
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "This is a mandatory package, it can't be unselected"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Etherboot ISO image is %s"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr "Domain Nama Pelayan IP."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Saint Lucia"
+msgstr "Saint Lucia"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "November"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Disconnect..."
+msgstr "Putus."
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Report"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Palau"
+msgstr "Palau"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "level"
+msgstr ""
+
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, fuzzy, c-format
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr "Semua tunggal."
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Package Group Selection"
+msgstr "Pemilihan Kumpulan Pakej"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid ""
+"Allow local hardware\n"
+"configuration."
+msgstr "lokal."
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Via Network Protocol: %s"
+msgstr "Rangkaian Protokol"
+
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "You can configure each parameter of the module here."
+msgstr ""
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, fuzzy, c-format
+msgid "Choose the resolution and the color depth"
+msgstr "dan"
+
+#: ../../standalone/mousedrake:1
+#, c-format
+msgid "Emulate third button?"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr "dan."
+
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Mount"
+msgstr ""
+
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Creating auto install floppy"
+msgstr "Mencipta"
+
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Install updates"
+msgstr "Install"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text box height"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "State"
+msgstr ""
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Be sure a media is present for the device %s"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Enable multiple profiles"
+msgstr ""
+
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Do not interpret character or block special devices on the file system."
+msgstr "on fail."
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr "dan fail dalam direktori"
+
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Local printer"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Files Restored..."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Package selection"
+msgstr "Pakej"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Mauritania"
+msgstr "Mauritania"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t      \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
+"dan DHCP dalam Rangkaian lokal dan DHCP default Pelayan Nama on IP dan DHCP"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr "Tidak lokal Kepada secara manual fail dalam USB USB."
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "All primary partitions are used"
+msgstr "Semua"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "LPD server \"%s\", printer \"%s\""
+msgstr "on"
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
+msgstr "siap ulanghidup."
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "dan."
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation Server Configuration"
+msgstr "Pelayan"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Configuring IDE"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Network functionality not configured"
+msgstr "Rangkaian"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Configure module"
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Cocos (Keeling) Islands"
+msgstr "Kepulauan Cocos (Keeling)"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "You'll need to reboot before the modification can take place"
+msgstr ""
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Provider phone number"
+msgstr ""
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Host %s"
+msgstr "Hos"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Fiji"
+msgstr "Fiji"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Armenia"
+msgstr "Armenia"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Second floppy drive"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "About Harddrake"
+msgstr "Perihal"
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Authorize TCP connections to X Window"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Drive capacity"
+msgstr "Pemacu"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr "dalam on"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Size: %s"
+msgstr "Saiz"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Control and Shift keys simultaneously"
+msgstr "dan Shif"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "secondary"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "View Backup Configuration."
+msgstr "Konfigurasikan."
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "if set to yes, report check result to syslog."
+msgstr "ya."
+
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "No password"
+msgstr "Tidak"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Nigeria"
+msgstr "Nigeria"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "%s: %s requires hostname...\n"
+msgstr ""
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "There is no existing partition to use"
+msgstr "tidak"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "on"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Multi-function device on parallel port #%s"
+msgstr "on"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr "Kepada soket IP dan default on."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Hard drive information"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Russian"
+msgstr "Russia"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Jordan"
+msgstr "Jordan"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Hide files"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Auto-detect printers connected to this machine"
+msgstr ""
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr "tidak dalam dalam."
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Sorry, no floppy drive available"
+msgstr "tidak"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Bolivia"
+msgstr "Bolivia"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr "Tetingkap dan dalam"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Bad package"
+msgstr ""
+
+#: ../../share/advertising/07-server.pl:1
+#, fuzzy, c-format
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr "fail dan!"
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "DrakSec Basic Options"
+msgstr "Asas"
+
+#: ../../standalone/draksound:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program.  Just type \"sndconfig\" in a console."
+msgstr "dalam."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Romania"
+msgstr "Romania"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Group"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Canada"
+msgstr "Kanada"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "choose device"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Remove from LVM"
+msgstr "Buang"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Timezone"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "German"
+msgstr "Jerman"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Next ->"
+msgstr "Berikutnya"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
+msgstr "on biasa fail dalam dalam dalam dan on on on on."
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr "Jurupacu"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Guinea-Bissau"
+msgstr "Guinea-Bissau"
+
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Horizontal refresh rate"
+msgstr ""
+
+#: ../../standalone/drakperm:1 ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Edit"
+msgstr "Edit"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr "siap dan Rangkaian Internet dan Perkakasan"
+
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "USB controllers"
+msgstr "USB"
+
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "What norm is your TV using?"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Type:"
+msgstr "Jenis:"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Share name"
+msgstr "Kongsi"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "enable"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr ""
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr "A"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Remove the loopback file?"
+msgstr "Buang fail?"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Selected size is larger than available space"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NCP server name missing!"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Please choose your country."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hard Disk Backup files..."
+msgstr "fail."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Laotian"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Samoa"
+msgstr "Samoa"
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr "on on."
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Re-generating list of configured scanners ..."
+msgstr ""
+
+#: ../../modules/interactive.pm:1
+#, fuzzy, c-format
+msgid "Module configuration"
+msgstr "Bunyi"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Scanner"
+msgstr ""
+
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Amaran"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "pengguna dan"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Menudrake"
+msgstr ""
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Welcome To Crackers"
+msgstr "Selamat Datang Kepada"
+
+#: ../../modules/interactive.pm:1
+#, fuzzy, c-format
+msgid "Module options:"
+msgstr "Modul:"
+
+#: ../../share/advertising/11-mnf.pl:1
+#, fuzzy, c-format
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr "Rangkaian"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Go on without configuring the network"
+msgstr "Pergi ke on"
+
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Abort"
+msgstr "Abai"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No password prompt on %s at port %s"
+msgstr "Tidak on"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Kensington Thinking Mouse with Wheel emulation"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Usage of remote scanners"
+msgstr ""
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr "Tetingkap Tetingkap ulanghidup."
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Dvorak (Norwegian)"
+msgstr "Norwegian"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Hard Disk Backup Progress..."
+msgstr ""
+
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#, c-format
+msgid "Unable to fork: %s"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Type: "
+msgstr "Jenis "
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "<-- Edit Client"
+msgstr "Edit"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "no fonts found"
+msgstr "tidak"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Mouse"
+msgstr "Tetikus"
+
+#: ../../bootloader.pm:1
+#, fuzzy, c-format
+msgid "not enough room in /boot"
+msgstr "dalam"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Liechtenstein"
+msgstr "Liechtenstein"
+
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Host name"
+msgstr "Hos"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "the color of the progress bar"
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Suppress Fonts Files"
+msgstr "Font"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Add to RAID"
+msgstr "Tambah"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"dalam dan\n"
+" Label\n"
+" Imej\n"
+"\n"
+" Tambah on dalam dan on\n"
+"\n"
+"\n"
+"\n"
+" default default\n"
+" terpasang fail default\n"
+" dalam\n"
+" Default default Tab."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr "Pejabat."
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No floppy drive available!"
+msgstr "Tidak!"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr "Kepada on"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Saudi Arabia"
+msgstr "Arab Saudi"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Continue anyway?"
+msgstr "Teruskan?"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Internet"
+msgstr "Internet"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Some devices were added:\n"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing on the printer \"%s\""
+msgstr "Cetakan on"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr "hos dan hos"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From Tape"
+msgstr "Daripada"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Choose the profile to configure"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, fuzzy, c-format
+msgid "Password minimum length and number of digits and upcase letters"
+msgstr "Katalaluan dan dan"
+
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr "default."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup Now from configuration file"
+msgstr ""
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "Mount points should contain only alphanumerical characters"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Restarting printing system..."
+msgstr ""
+
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "See hardware info"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Day"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "First sector of boot partition"
+msgstr "Sektor pertama bagi partisyen but"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer manufacturer, model"
+msgstr ""
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "PDQ - Print, Don't Queue"
+msgstr ""
+
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable         : enable MTS\n"
+"--disable        : disable MTS\n"
+"--start          : start MTS\n"
+"--stop           : stop MTS\n"
+"--adduser        : add an existing system user to MTS (requires username)\n"
+"--deluser        : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient      : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient      : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr "Pelayan mula mula pengguna pengguna IP IP"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Subnet Mask:"
+msgstr "Topengan:"
+
+#: ../../security/l10n.pm:1
+#, fuzzy, c-format
+msgid "Set password expiration and account inactivation delays"
+msgstr "dan"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid ""
+"_: load here is a noun, the load of the system\n"
+"Load"
+msgstr ""
+
+#: ../../Xconfig/monitor.pm:1
+#, fuzzy, c-format
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"menegak dan mengufuk\n"
+" dalam."
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#, c-format
+msgid "Modify"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr "dan<file>"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Need hostname, username and password!"
+msgstr "dan!"
+
+#: ../../network/adsl.pm:1
+#, fuzzy, c-format
+msgid "Insert floppy"
+msgstr "dalam"
+
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr "direktori dan lokal Baru."
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "HardDrake"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "new"
+msgstr ""
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "Enable/Disable syslog reports to console 12"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Would you like to try again?"
+msgstr ""
+
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Wizard"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Edit selected server"
+msgstr "Edit"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please choose where you want to backup"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Do not include the browser cache"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can lose data)"
+msgstr "Gagal"
+
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Please, choose your keyboard layout."
+msgstr ""
+
+#: ../../mouse.pm:1 ../../security/level.pm:1
+#, c-format
+msgid "Standard"
+msgstr ""
+
+#: ../../standalone/mousedrake:1
+#, c-format
+msgid "Please choose your mouse type."
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Connect..."
+msgstr "Sambung."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Gagal!"
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "not configured"
+msgstr ""
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "ISA / PCMCIA"
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "About"
+msgstr "Perihal"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "Proxies configuration"
+msgstr ""
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "GlidePoint"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Start: sector %s\n"
+msgstr "Mula"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "No Mask"
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Network interface already configured"
+msgstr "Rangkaian"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Couldn't access the floppy!"
+msgstr ""
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "connecting to Bugzilla wizard ..."
+msgstr ""
+
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Mail Server"
+msgstr "Pelayan Mel"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "Please click on a partition"
+msgstr "on"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Multi-function device on HP JetDirect"
+msgstr "on"
+
+#: ../../any.pm:1 ../../standalone/drakbackup:1
+#, c-format
+msgid "Linux"
+msgstr ""
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Have a nice day!"
+msgstr ""
+
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/fd0"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Upgrade %s"
+msgstr "Tingkatupaya"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Select Printer Connection"
+msgstr ""
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Scanning for TV channels in progress ..."
+msgstr "dalam."
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"Ralat fail FTP\n"
+" FTP."
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "IP Range Start:"
+msgstr "IP Mula:"
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr "dan."
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "the height of the progress bar"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr "Simpan on"
+
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Argentina"
+msgstr "Argentina"
+
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Domain Name Server"
+msgstr "Domain Nama"
+
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Level:"
+msgstr "Tahap keselamatan:"
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "Mount points must begin with a leading /"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Choose your CD/DVD device"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Postfix Mail Server"
+msgstr "Mel"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Quit without saving"
+msgstr "Keluar tanpa menyimpan"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Yemen"
+msgstr "Yaman"
+
+#: ../../share/advertising/11-mnf.pl:1
+#, fuzzy, c-format
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "on."
+
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "=> There are many things to choose from (%s).\n"
+msgstr ""
+
+#: ../../steps.pm:1
+#, c-format
+msgid "Hard drive detection"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid ""
+"You need the Alcatel microcode.\n"
+"You can provide it now via a floppy or your windows partition,\n"
+"or skip and do it later."
+msgstr ""
+
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid "Please enter the WebDAV server URL"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Tajikistan"
+msgstr "Tajikistan"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Accept"
+msgstr "Terima"
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Description"
+msgstr "Huraian"
+
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "Error opening %s for writing: %s"
+msgstr "Ralat"
+
+#: ../../Xconfig/various.pm:1
+#, fuzzy, c-format
+msgid "Mouse type: %s\n"
+msgstr "Tetikus"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr ""
+
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Choose a monitor"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Empty label not allowed"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Maltese (UK)"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "I can't add any more partition"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Size in MB: "
+msgstr "Saiz dalam "
+
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Remote printer"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Please choose a language to use."
+msgstr ""
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr "AMARAN Internet terima."
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "I can set up your computer to automatically log on one user."
+msgstr "on pengguna."
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Floppy format"
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Generic Printers"
+msgstr "Generik"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr "fail dalam"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "The scanners on this machine are available to other computers"
+msgstr "on"
+
+#: ../../any.pm:1
+#, c-format
+msgid "First sector of the root partition"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Alternative drivers"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Cape Verde"
+msgstr "Cape Verde"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr ""
+
+#: ../../standalone/printerdrake:1
+#, c-format
+msgid "Loading printer configuration... Please wait"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr "dan"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Guam"
+msgstr "Guam"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr "fail dalam"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "/Options/Test"
+msgstr "Pilihan"
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr "Internet tidak."
+
+#: ../../fs.pm:1
+#, c-format
+msgid "Mounting partition %s"
+msgstr ""
+
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "User name"
+msgstr "Nama pengguna"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Userdrake"
+msgstr "Userdrake"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Test pages"
+msgstr "Ujian"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Logical volume name "
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+
+#: ../../fs.pm:1
+#, c-format
+msgid "Checking %s"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "TCP/Socket Printer Options"
+msgstr ""
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Card mem (DMA)"
+msgstr "DMA"
+
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "Disconnecting from Internet "
+msgstr ""
+
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "France"
+msgstr "Perancis"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "browse"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Checking installed software..."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Remote printer name missing!"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "on dalam lokal"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Turkey"
+msgstr "Turki"
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "Alcatel speedtouch usb"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Number of buttons"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Module"
+msgstr "Modul"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr "Masuk."
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Hardware"
+msgstr "Perkakasan"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Ctrl dan Alt"
+
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "United States"
+msgstr "Amerika Syarikat"
+
+#: ../../security/l10n.pm:1
+#, fuzzy, c-format
+msgid "User umask"
+msgstr "Pengguna"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Default OS?"
+msgstr "Default?"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Swiss (German layout)"
+msgstr "Jerman"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Configure all heads independently"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr "on."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NTP Server"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, fuzzy, c-format
+msgid "Sulogin(8) in single user level"
+msgstr "dalam tunggal pengguna"
+
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Load/Save on floppy"
+msgstr "Simpan on"
+
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "dalam!"
+
+#: ../../pkgs.pm:1
+#, c-format
+msgid "nice"
+msgstr ""
+
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Leaving in %d seconds"
+msgstr "dalam"
+
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Please choose which serial port your modem is connected to."
+msgstr "bersiri."
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Property"
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Ghostscript"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "LAN Configuration"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Ghana"
+msgstr "Ghana"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Path or Module required"
+msgstr "Modul"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Advanced Options"
+msgstr "Lanjutan"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "View Configuration"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Coma bug"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"on dan on\n"
+" on\n"
+" dan dalam\n"
+"\n"
+"\n"
+" dan\n"
+" dan on\n"
+" secara manual dan dan\n"
+"\n"
+"\n"
+" on\n"
+" Tab dan Naik Turun\n"
+" Ctrl kosong\n"
+" Ctrl\n"
+" Ctrl fail on dan."
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+"\n"
+" dan on\n"
+" Masuk."
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "There was an error installing packages:"
+msgstr "ralat:"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Lexmark inkjet configuration"
+msgstr ""
+
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Undo"
+msgstr ""
+
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Save partition table"
+msgstr "Simpan"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Finnish"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Macedonia"
+msgstr "Macedonia"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr "pengguna pengguna."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovenian"
+msgstr ""
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Authorize:\n"
+"\n"
+"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
+"set to \"ALL\",\n"
+"\n"
+"- only local ones if set to \"LOCAL\"\n"
+"\n"
+"- none if set to \"NONE\".\n"
+"\n"
+"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
+"(5))."
+msgstr "hos lokal tiada hos hos."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Libya"
+msgstr "Libya"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer on parallel port #%s"
+msgstr "on"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Table"
+msgstr ""
+
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "I don't know how to format %s in type %s"
+msgstr "dalam"
+
+#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Model"
+msgstr "Model"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "USB printer #%s"
+msgstr "USB"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Stop Server"
+msgstr "Henti"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr "dan"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Modem"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Tuvalu"
+msgstr "Tuvalu"
+
+#: ../../help.pm:1 ../../network/netconnect.pm:1
+#, c-format
+msgid "Use auto detection"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr "dan on."
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Started on boot"
+msgstr "on"
+
+#: ../../share/advertising/12-mdkexpert.pl:1
+#, fuzzy, c-format
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr "dan dan on:"
+
+#: ../../security/l10n.pm:1
+#, fuzzy, c-format
+msgid "No password aging for"
+msgstr "Tidak"
+
+#: ../../standalone/draksec:1
+#, c-format
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Automatically find available printers on remote machines"
+msgstr "on"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "East Timor"
+msgstr "Timor Larose"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "On Tape Device"
+msgstr "on"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr "Simpan on"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Login name"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Report unowned files"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Del profile..."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Installing Foomatic..."
+msgstr ""
+
+#: ../../standalone/XFdrake:1
+#, fuzzy, c-format
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "keluar dan Ctrl Alt"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "detected"
+msgstr ""
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "ulanghidup?"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package: "
+msgstr "Pakej "
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "SECURITY WARNING!"
+msgstr "AMARAN!"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "StarOffice"
+msgstr ""
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "No, I don't want autologin"
+msgstr "Tidak"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Windows Migration tool"
+msgstr "Tetingkap"
+
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "All languages"
+msgstr "Semua"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Removing %s"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "%s not found...\n"
+msgstr ""
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Testing your connection..."
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Cache size"
+msgstr ""
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr "Katalaluan dihidupkan."
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Start sector: "
+msgstr "Mula "
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Congo (Brazzaville)"
+msgstr "Kongo"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Read"
+msgstr ""
+
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#, c-format
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Seychelles"
+msgstr "Seychelles"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr "dalam dalam dan dan secara manual secara manual on"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Bad password on %s"
+msgstr "on"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr "tidak diketahui"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Right Control key"
+msgstr "Kanan"
+
+#: ../../network/adsl.pm:1
+#, fuzzy, c-format
+msgid ""
+"Insert a FAT formatted floppy in drive %s with %s in root directory and "
+"press %s"
+msgstr "dalam"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Zambia"
+msgstr "Zambia"
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Security Administrator (login or email)"
+msgstr "Keselamatan"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Sorry, we support only 2.4 kernels."
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Romanian (qwerty)"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Under Devel ... please wait."
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Egypt"
+msgstr "Mesir"
+
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Czech Republic"
+msgstr "Republik Czech"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Sound card"
+msgstr "Bunyi"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Import Fonts"
+msgstr ""
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr "Tetingkap on on"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Suppress Temporary Files"
+msgstr ""
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"\n"
+msgstr "Tahniah dan Internet"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Change partition type"
+msgstr "Ubah"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
+"Resolusi\n"
+" dan A dalam."
+
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Network Options"
+msgstr "Rangkaian"
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Enable msec hourly security check"
+msgstr ""
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid ""
+"Display theme\n"
+"under console"
+msgstr "Paparan"
+
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "Statistics"
+msgstr ""
+
+#: ../../printer/cups.pm:1
+#, fuzzy, c-format
+msgid "(on %s)"
+msgstr "on"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "MM Series"
+msgstr ""
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr "A dan."
+
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "average"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "New printer name"
+msgstr "Baru"
+
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid ""
+"Allow an ordinary user to mount the file system. The\n"
+"name of the mounting user is written to mtab so that he can unmount the "
+"file\n"
+"system again. This option implies the options noexec, nosuid, and nodev\n"
+"(unless overridden by subsequent options, as in the option line\n"
+"user,exec,dev,suid )."
+msgstr "pengguna fail pengguna fail dan dalam."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Equatorial Guinea"
+msgstr "Equitorial Guinea"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup System"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Build Backup"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr "Kepada fail<file><file>"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Currently, no alternative possibility is available"
+msgstr "tidak"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Romanian (qwertz)"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Write Config"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr "IP on protokol."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Kiribati"
+msgstr "Kiribati"
+
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
+msgstr "Logitech Mouse (bersiri, jenis C7 lama)"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Other (not drakbackup) keys in place already"
+msgstr "Lain-lain dalam"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
+"\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is incorrect, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+"   the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
+"Sistem KDE GNOME AfterStep\n"
+" dan on\n"
+" Masuk\n"
+" dan\n"
+" dan A dalam\n"
+" dan dan saat Ubah\n"
+"."
+
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Browse"
+msgstr "Lungsur"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "CDROM"
+msgstr ""
+
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Internet?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belgian"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you have an ISA sound card?"
+msgstr ""
+
+#: ../../network/ethernet.pm:1
+#, fuzzy, c-format
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr "Tidak on."
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "Windows"
+msgstr "Tetingkap"
+
+#: ../../common.pm:1
+#, c-format
+msgid "Can't make screenshots before partitioning"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Name"
+msgstr "Hos"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "/File/Save _As"
+msgstr "Fail Simpan"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
+"Kepada on dalam lokal on on Semua dalam dalam utama dalam lokal IP dan."
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr "dalam secara manual?"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting default image"
+msgstr "default"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Restrict command line options"
+msgstr ""
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "East Europe"
+msgstr "Timur"
+
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Use free space"
+msgstr ""
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "use dhcp"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Mail alert"
+msgstr "Mel"
+
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "Internet configuration"
+msgstr "Internet"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Uzbekistan"
+msgstr "Uzbekistan"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Detected %s"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "/Autodetect _printers"
+msgstr ""
+
+#: ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#, fuzzy, c-format
+msgid "Finish"
+msgstr "Tamat"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Show automatically selected packages"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Togo"
+msgstr "Togo"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "CPU flags reported by the kernel"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr ""
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "16 MB"
+msgstr ""
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Please try again"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The model is correct"
+msgstr ""
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "FAT resizing failed: %s"
+msgstr ""
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Individual package selection"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "This partition is not resizeable"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Location"
+msgstr "Lokasi"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable-hrc)"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Guatemala"
+msgstr "Guatemala"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Journalised FS"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Ethernet cards promiscuity check"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "This machine"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Bahrain"
+msgstr "Bahrain"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "fail dan on OK"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "omit scsi modules"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr ""
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr "on Ok Internet Rangkaian"
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Run the daily security checks"
+msgstr ""
+
+#: ../../Xconfig/various.pm:1
+#, fuzzy, c-format
+msgid "Keyboard layout: %s\n"
+msgstr "Papan Kekunci"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr "dan."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Maltese (US)"
+msgstr ""
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "The creation of the boot floppy has been successfully completed \n"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr "dan Rangkaian Fail Sistem SMB Tetingkap dan."
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Launch the wizard"
+msgstr ""
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Tvcard"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "normal"
+
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Size"
+msgstr "Saiz"
+
+#: ../../help.pm:1
+#, c-format
+msgid "GRUB"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Greenland"
+msgstr "Greenland"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Thursday"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
+msgstr "Internet siap dihidupkan?"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete All NBIs"
+msgstr "Padam Semua"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+"    * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" dalam default on on\n"
+" pengguna dalam pengguna."
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Which configuration of XFree do you want to have?"
+msgstr ""
+
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "More"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -"
+"scanbus' would also show you the device number."
+msgstr ""
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr "terima on Internet."
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Server Name"
+msgstr "Pelayan Nama:"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Account Password"
+msgstr ""
+
+#: ../../standalone/drakhelp:1
+#, fuzzy, c-format
+msgid ""
+"%s cannot be displayed \n"
+". No Help entry of this type\n"
+msgstr "Tidak Bantuan"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr "on on Sistem?"
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful: this\n"
+"operation is dangerous. If you have not already done so, you\n"
+"first need to exit the installation, run \"chkdsk c:\" from a\n"
+"Command Prompt under Windows (beware, running graphical program\n"
+"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
+"Command Prompt!), optionally run defrag, then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr "AMARAN Tetingkap siap Tetingkap dan ulanghidup Ok."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Tajik keyboard"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr "siap Semua dan default"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Font List"
+msgstr "Font"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader.  If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"Buka\n"
+"\n"
+" Arahan dan\n"
+"\n"
+"."
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"Entah\n"
+"\n"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Select file"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr "on lokal:"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr "dalam Cetakan fail fail"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Japan"
+msgstr "Jepun"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print option list"
+msgstr ""
+
+#: ../../standalone/localedrake:1
+#, fuzzy, c-format
+msgid "The change is done, but to be effective you must logout"
+msgstr "siap"
+
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Country / Region"
+msgstr ""
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Search servers"
+msgstr "Cari"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NCP queue name missing!"
+msgstr ""
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr "Amaran"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Cd-Rom labeled \"%s\""
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "CDRW media"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
+msgstr "dan."
+
+#: ../../share/advertising/07-server.pl:1
+#, c-format
+msgid "Turn your computer into a reliable server"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, fuzzy, c-format
+msgid "Check empty password in /etc/shadow"
+msgstr "kosong dalam"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid " (driver %s)"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"Loopback file(s):\n"
+"   %s\n"
+msgstr "fail\n"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "I don't know"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Start when requested"
+msgstr "Mula"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr "IP"
+
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid ""
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
+msgstr "Install dan on dalam dan?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Telugu"
+msgstr ""
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr "default"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Post Uninstall"
+msgstr ""
+
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "Connecting to Internet "
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid " ("
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Cpuid level"
+msgstr ""
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Novell server \"%s\", printer \"%s\""
+msgstr "on"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Mongolian (cyrillic)"
+msgstr ""
+
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Add a module"
+msgstr "Tambah"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Profile to delete:"
+msgstr ""
+
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "Local measure"
+msgstr ""
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Warning : IP address %s is usually reserved !"
+msgstr "Amaran IP!"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "busmouse"
+msgstr ""
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Account Login (user name)"
+msgstr "pengguna"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Fdiv bug"
+msgstr ""
+
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
+msgstr "Rangkaian Internet."
+
+#: ../../security/l10n.pm:1
+#, fuzzy, c-format
+msgid "Accept broadcasted icmp echo"
+msgstr "Terima"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Uruguay"
+msgstr "Uruguay"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Benin"
+msgstr "Benin"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "SMB/Windows server \"%s\", share \"%s\""
+msgstr "on SMB Tetingkap"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Path selection"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Name/IP address of host:"
+msgstr "Nama IP:"
+
+#: ../../Xconfig/various.pm:1
+#, fuzzy, c-format
+msgid "Monitor: %s\n"
+msgstr "Monitor"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Custom & system settings"
+msgstr "Tersendiri"
+
+#: ../../partition_table/raw.pm:1
+#, fuzzy, c-format
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
+msgstr "on on."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP missing!"
+msgstr "IP!"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check all users that you want to include in your backup."
+msgstr "dalam."
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr "dalam Perkakasan."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Bangladesh"
+msgstr "Bangladesh"
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Japan (cable)"
+msgstr "Jepun"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Initial tests"
+msgstr ""
+
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Continue"
+msgstr "Teruskan"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Custom Restore"
+msgstr "Tersendiri"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Saturday"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr "on on on dan."
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "Set the root umask."
+msgstr ""
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Script-based"
+msgstr ""
+
+#: ../../install_any.pm:1 ../../partition_table.pm:1
+#, fuzzy, c-format
+msgid "Error reading file %s"
+msgstr "Ralat fail"
+
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "PLL setting:"
+msgstr ""
+
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#, fuzzy, c-format
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "terpasang dalam"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid " on "
+msgstr ""
+
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "The URL must begin with http:// or https://"
+msgstr "URL"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Other OS (SunOS...)"
+msgstr "Lain-lain"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Install/Upgrade"
+msgstr "Install"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr ""
+
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Costa Rica"
+msgstr "Costa Rica"
+
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default             : save default directories.\n"
+"--debug               : show all debug messages.\n"
+"--show-conf           : list of files or directories to backup.\n"
+"--config-info         : explain configuration file options (for non-X "
+"users).\n"
+"--daemon              : use daemon configuration. \n"
+"--help                : show this message.\n"
+"--version             : show version number.\n"
+msgstr "default dan default default fail fail"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain Authentication Required"
+msgstr "Domain Pengesahan"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
+msgstr ""
+
+#: ../../security/level.pm:1
+#, c-format
+msgid "Use libsafe for servers"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Icelandic"
+msgstr "Icelandic"
+
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"\n"
+"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Maximum size\n"
+" allowed for Drakbackup (MB)"
+msgstr ""
+
+#: ../../loopback.pm:1
+#, c-format
+msgid "Circular mounts %s\n"
+msgstr ""
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Lilo/grub mode"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Martinique"
+msgstr "Martinique"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "HardDrive / NFS"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Old user list:\n"
+msgstr "pengguna"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Search Backups"
+msgstr "Cari"
+
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "a number"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Swedish"
+msgstr "Swedish"
+
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Which %s driver should I try?"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr "tidak"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Weekday"
+msgstr ""
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Filesystem types:"
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Northern Mariana Islands"
+msgstr "Kepulauan Mariana Utara"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", multi-function device on HP JetDirect"
+msgstr "on"
+
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "none"
+msgstr "tiada"
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
+msgstr "Nama:"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Floppy"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Maintain /etc/exports:\n"
+"        \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+"        \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+"        \t\tdiskless clients.\n"
+"\n"
+"        \t\tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t\t/                  (ro,all_squash)\n"
+"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network."
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Ghostscript referencing"
+msgstr ""
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Bootloader"
+msgstr "PemuatBoot"
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Authorize all services controlled by tcp_wrappers"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move"
+msgstr ""
+
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "Bootloader to use"
+msgstr "PemuatBoot"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "SMB server host"
+msgstr "SMB"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "Nama Pelayan:"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Minute"
+msgstr ""
+
+#: ../../install_messages.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer,  duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr "dalam dan dan dalam on on Masuk dan dan"
+
+#: ../../standalone/printerdrake:1
+#, c-format
+msgid "/_Expert mode"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Buang Pejabat"
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
+msgstr "Pelayan dan."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Micronesia"
+msgstr "Micronesia"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "4 billion colors (32 bits)"
+msgstr ""
+
+#: ../../steps.pm:1
+#, c-format
+msgid "License"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "This may take a moment to generate the keys."
+msgstr ""
+
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid ""
+"Here, you can setup the security level and administrator of your machine.\n"
+"\n"
+"\n"
+"The Security Administrator is the one who will receive security alerts if "
+"the\n"
+"'Security Alerts' option is set. It can be a username or an email.\n"
+"\n"
+"\n"
+"The Security Level menu allows you to select one of the six preconfigured "
+"security levels\n"
+"provided with msec. These levels range from poor security and ease of use, "
+"to\n"
+"paranoid config, suitable for very sensitive server applications:\n"
+"\n"
+"\n"
+"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
+"very\n"
+"easy to use security level. It should only be used for machines not "
+"connected to\n"
+"any network and that are not accessible to everybody.\n"
+"\n"
+"\n"
+"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
+"security\n"
+"recommended for a computer that will be used to connect to the Internet as "
+"a\n"
+"client.\n"
+"\n"
+"\n"
+"<span foreground=\"royalblue3\">High</span>: There are already some\n"
+"restrictions, and more automatic checks are run every night.\n"
+"\n"
+"\n"
+"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
+"enough\n"
+"to use the system as a server which can accept connections from many "
+"clients. If\n"
+"your machine is only a client on the Internet, you should choose a lower "
+"level.\n"
+"\n"
+"\n"
+"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
+"previous\n"
+"level, but the system is entirely closed and security features are at their\n"
+"maximum"
+msgstr ""
+"dan Keselamatan Keselamatan Keselamatan dan\n"
+"<span foreground=\"royalblue3\"></span> dan\n"
+"<span foreground=\"royalblue3\"></span> Internet\n"
+"<span foreground=\"royalblue3\"> Tinggi</span> dan\n"
+"<span foreground=\"royalblue3\"></span> terima on Internet\n"
+"<span foreground=\"royalblue3\"></span> dan"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "dan SMB"
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "Sagem (using pppoa) usb"
+msgstr ""
+
+#: ../../install_any.pm:1
+#, fuzzy, c-format
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr "ralat tidak on"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Starting the printing system at boot time"
+msgstr ""
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Do you want to start the connection at boot?"
+msgstr "mula?"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Processor ID"
+msgstr "Pemproses"
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Sound trouble shooting"
+msgstr "Bunyi"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Polish (qwerty layout)"
+msgstr ""
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "/_Add Printer"
+msgstr "Tambah user"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr "on dalam dan dan default dalam on?"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Host \"%s\", port %s"
+msgstr "Hos"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "This partition can't be used for loopback"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "File already exists. Use it?"
+msgstr "Fail?"
+
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "received: "
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Right Alt key"
+msgstr "Kanan Alt"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "the list of alternative drivers for this sound card"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Gateway"
+msgstr "Gateway"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Tonga"
+msgstr "Tonga"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Tunisia"
+msgstr "Tunisia"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Scanner sharing"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Profile: "
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr "on dalam dalam."
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "Allow/Forbid autologin."
+msgstr ""
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "XawTV isn't installed!"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "fail"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "old static device name used in dev package"
+msgstr "dalam"
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Enable the logging of IPv4 strange packets"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "This label is already used"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"dalam on dan on dan on on off\n"
+" on Berikutnya dan on Batal."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Greek (polytonic)"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "on"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection Time: "
+msgstr "Masa "
+
+#: ../../standalone/livedrake:1
+#, fuzzy, c-format
+msgid ""
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
+msgstr "dalam dan Ok siap Batal."
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Use group id for execution"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Choose the default user:"
+msgstr "default pengguna:"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Gabon"
+msgstr "Gabon"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
+msgstr "on."
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid ""
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr "dan ulanghidup."
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Directory (or module) to put the backup on this host."
+msgstr "Direktori on."
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain"
+msgstr "Domain"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
+"dan dan\n"
+" Tetingkap\n"
+" tiada."
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Provider dns 2 (optional)"
+msgstr ""
+
+#: ../../any.pm:1 ../../help.pm:1
+#, c-format
+msgid "Boot device"
+msgstr ""
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which partition do you want to resize?"
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "United States Minor Outlying Islands"
+msgstr "Amerika Syarikat, kepulauan Luar Minor"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Djibouti"
+msgstr "Djibouti"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "A tool to monitor your logs"
+msgstr "A"
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "detected on port %s"
+msgstr "on"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPD"
+msgstr ""
+
+#: ../../Xconfig/various.pm:1
+#, fuzzy, c-format
+msgid "Graphics card: %s\n"
+msgstr "Grafik"
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "/Set as _Default"
+msgstr "Default"
+
+#: ../../security/l10n.pm:1
+#, fuzzy, c-format
+msgid "Accept icmp echo"
+msgstr "Terima"
+
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Yaboot"
+msgstr ""
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech CC Series with Wheel emulation"
+msgstr ""
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Splash selection"
+msgstr ""
+
+#: ../../partition_table.pm:1
+#, fuzzy, c-format
+msgid "Extended partition not supported on this platform"
+msgstr "on"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "ISDN Configuration"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "high"
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Internet Connection Sharing"
+msgstr "Internet"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Choose file"
+msgstr ""
+
+#: ../../network/shorewall.pm:1
+#, fuzzy, c-format
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr "Amaran."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Cetakan on"
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Daily security check"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
+msgstr "on on dalam lokal"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "default"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"the WP flag in the CR0 register of the cpu enforce write proctection at the "
+"memory page level, thus enabling the processor to prevent unchecked kernel "
+"accesses to user memory (aka this is a bug guard)"
+msgstr "dalam pengguna"
+
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Generik"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing old printer \"%s\"..."
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Select a device !"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "Buang"
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "Sagem (using dhcp) usb"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "French Southern Territories"
+msgstr "Perancis"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "the vendor name of the processor"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "All data on this partition should be backed-up"
+msgstr "Semua on"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Installing package %s"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Checking device and configuring HPOJ..."
+msgstr "dan."
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr "Kepada"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr "Aplikasi Fail Fail on fail Masuk fail."
+
+#: ../../steps.pm:1
+#, c-format
+msgid "Choose packages to install"
+msgstr ""
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "dan on"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr "Huraian dan Lokasi dalam."
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr "on on."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Bhutan"
+msgstr "Bhutan"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Network interface"
+msgstr "Rangkaian"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnection from Internet failed."
+msgstr "Internet."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Reading printer data..."
+msgstr "Membaca."
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Korean keyboard"
+msgstr "Korea"
+
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Not connected"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Greek"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Saint Kitts and Nevis"
+msgstr "dan"
+
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "Generic 3 Button Mouse with Wheel emulation"
+msgstr "Generik"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Enable OF Boot?"
+msgstr ""
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Erase your RW media (1st Session)"
+msgstr ""
+
+#: ../../Xconfig/various.pm:1
+#, fuzzy, c-format
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Monitor"
+
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Mount point"
+msgstr ""
+
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr "ralat"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "TCP/IP host \"%s\", port %s"
+msgstr "IP"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "User :"
+msgstr "Pengguna:"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore system"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr "on:"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "The DHCP end ip"
+msgstr "DHCP"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Another one"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Drakbackup"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Colombia"
+msgstr "Kolombia"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid ""
+"Current configuration of `%s':\n"
+"\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
+msgstr ""
+
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Plug'n Play"
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Reunion"
+msgstr "Reunion"
+
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Details"
+msgstr "Perincian"
+
+#: ../../network/tools.pm:1
+#, c-format
+msgid "For security reasons, it will be disconnected now."
+msgstr ""
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Synchronization tool"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Checking your system..."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
+"\n"
+" dalam"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Mongolia"
+msgstr "Mongolia"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Mounted\n"
+msgstr ""
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Configure CUPS"
+msgstr "DHCP"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Grafikal"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore Users"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Encryption key for %s"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr "dan NIS on protokol."
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Detected hardware"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Mauritius"
+msgstr "Mauritius"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Myanmar (Burmese)"
+msgstr "Myanmar"
+
+#: ../../fs.pm:1
+#, c-format
+msgid "Enabling swap partition %s"
+msgstr ""
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr "tidak"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (old)"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr "A."
+
+#: ../../share/advertising/12-mdkexpert.pl:1
+#, fuzzy, c-format
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr "Cari."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ", host \"%s\", port %s"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Monaco"
+msgstr "Monaco"
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Partitioning failed: %s"
+msgstr "Pempartisyenan"
+
+#: ../../fs.pm:1 ../../swap.pm:1
+#, c-format
+msgid "%s formatting of %s failed"
+msgstr ""
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Canada (cable)"
+msgstr "Kanada"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Floppy creation completed"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Upgrade"
+msgstr "Tingkatupaya"
+
+#: ../../help.pm:1
+#, c-format
+msgid "Workstation"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Kyrgyzstan"
+msgstr "Kyrgyzstan"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Multi-function device on USB"
+msgstr "on"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "asas"
+
+#: ../../services.pm:1
+#, c-format
+msgid "Anacron is a periodic command scheduler."
+msgstr ""
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr "on dan"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Western Sahara"
+msgstr "Sahara Barat"
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Proxy should be http://..."
+msgstr "Proksihttp://...."
+
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "South Africa"
+msgstr "Afrika Selatan"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Eject tape after the backup"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Etherboot Floppy/ISO"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Modify printer configuration"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose a partition"
+msgstr ""
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Edit current rule"
+msgstr "Edit"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "%s"
+msgstr "%s"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Please test the mouse"
+msgstr ""
+
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid ""
+"Do not update inode access times on this file system\n"
+"(e.g, for faster access on the news spool to speed up news servers)."
+msgstr "on fail on."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons with Wheel emulation"
+msgstr ""
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Sticky-bit"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Other Media"
+msgstr "Lain-lain"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup system files"
+msgstr ""
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan+"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Sector"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Qatar"
+msgstr "Qatar"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "LDAP Base dn"
+msgstr "LDAP Asas"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+
+#: ../../help.pm:1
+#, c-format
+msgid "generate auto-install floppy"
+msgstr ""
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Dialing mode"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "File sharing"
+msgstr "Fail"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Clean /tmp at each boot"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Malawi"
+msgstr "Malawi"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "local config: false"
+msgstr "lokal"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "System settings"
+msgstr "Tersendiri"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please choose your type of mouse."
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "class of hardware device"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
+msgstr "dan on:"
+
+#: ../../lang.pm:1 ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "United Kingdom"
+msgstr "United Kingdom"
+
+#: ../../services.pm:1
+#, c-format
+msgid "running"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Indonesia"
+msgstr "Indonesia"
+
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "default"
+msgstr "default"
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "France [SECAM]"
+msgstr "Perancis"
+
+#: ../../any.pm:1
+#, c-format
+msgid "restrict"
+msgstr ""
+
+#: ../../pkgs.pm:1
+#, c-format
+msgid "must have"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
+msgstr "on"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Senegal"
+msgstr "Senegal"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Command line"
+msgstr "Arahan"
+
+#: ../../share/advertising/08-store.pl:1
+#, fuzzy, c-format
+msgid ""
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
+msgstr "penuh on dan on:"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "March"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to administrative files"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Error during sendmail.\n"
+"  Your report mail was not sent.\n"
+"  Please configure sendmail"
+msgstr ""
+"Ralat\n"
+"\n"
+
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid ""
+"Do not allow set-user-identifier or set-group-identifier\n"
+"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
+"have suidperl(1) installed.)"
+msgstr "pengguna dalam"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Montserrat"
+msgstr "Montserrat"
+
+#: ../../help.pm:1
+#, c-format
+msgid "Automatic dependencies"
+msgstr ""
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Swap"
+msgstr ""
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Custom settings"
+msgstr "Tersendiri"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore Other"
+msgstr ""
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "TV card"
+msgstr ""
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "on SMB Tetingkap"
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "/_Configure CUPS"
+msgstr "DHCP"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid ", "
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected host/network"
+msgstr "Buang"
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr "Mel."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Uzbek (cyrillic)"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr "dan"
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "Rangkaian"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "if set to yes, reports check result to tty."
+msgstr "ya."
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From CD"
+msgstr "Daripada"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr "Internet on lokal Internet Rangkaian Internet Rangkaian Rangkaian."
+
+#: ../../network/ethernet.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr "Internet."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Photo memory card access on your HP multi-function device"
+msgstr "on"
+
+#: ../../share/advertising/09-mdksecure.pl:1
+#, c-format
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
+
+#: ../../standalone/printerdrake:1
+#, c-format
+msgid "Authors: "
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Internet dimatikan."
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr "ya fail."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Latin American"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "Jepun"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Old device file"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Info: "
+msgstr "Maklumat "
+
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Button `%s': %s"
+msgstr ""
+
+#: ../../any.pm:1 ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakbug:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Please wait"
+msgstr ""
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Genius NetMouse"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "None"
+msgstr "Tiada"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "IP"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please be sure that the cron daemon is included in your services."
+msgstr "dalam."
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Ethernet Card"
+msgstr ""
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Delete selected printer"
+msgstr "Padam"
+
+#: ../../services.pm:1 ../../ugtk2.pm:1
+#, fuzzy, c-format
+msgid "Info"
+msgstr "Maklumat"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Install"
+msgstr "Install"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr "on dan on on dan on Tetingkap on dan on."
+
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Exit install"
+msgstr "Keluar"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
+msgstr "Semuanya Internet on Rangkaian DHCP."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Remote CUPS server"
+msgstr ""
+
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "Sun - Mouse"
+msgstr "Sun"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr "on am Rangkaian."
+
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Minimal install"
+msgstr "Minima"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Ethiopia"
+msgstr "Ethiopia"
+
+#: ../../security/l10n.pm:1
+#, fuzzy, c-format
+msgid "Enable \"crontab\" and \"at\" for users"
+msgstr "dan"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Devanagari"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr "dan dan"
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Total size: %d / %d MB"
+msgstr "Jumlah"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "disabled"
+msgstr "dimatikan"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Search for new scanners"
+msgstr "Cari"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Disabling servers..."
+msgstr ""
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Installation of %s failed. The following error occured:"
+msgstr "ralat:"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr ""
+
+#: ../../install_any.pm:1
+#, fuzzy, c-format
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr "default Masuk"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Network printer (TCP/Socket)"
+msgstr "Rangkaian"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup User files..."
+msgstr "Pengguna fail."
+
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Install system"
+msgstr "Install"
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "First DNS Server (optional)"
+msgstr "Pelayan"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr "fail dalam"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
+"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
+"symlink /etc/security/msec/server to point to\n"
+"/etc/security/msec/server.<SERVER_LEVEL>.\n"
+"\n"
+"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
+"add a service if it is present in the file during the installation of\n"
+"packages."
+msgstr "dalam<SERVER_LEVEL> dalam fail."
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Russian (Phonetic)"
+msgstr "Russia"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "dhcpd Config..."
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "siap dimatikan."
+
+#: ../../any.pm:1
+#, c-format
+msgid "LILO/grub Installation"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Israeli"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "on"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Floppy can be removed now"
+msgstr ""
+
+#: ../../help.pm:1
+#, c-format
+msgid "Truly minimal install"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Denmark"
+msgstr "Denmark"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving partition..."
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "(This) DHCP Server IP"
+msgstr "DHCP Pelayan"
+
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Test of the configuration"
+msgstr "Ujian"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Installing %s ..."
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
+msgstr "dan on on default mula dan tidak dan amaran on."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose your filesystem encryption key"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Sierra Leone"
+msgstr "Sierra Leone"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Botswana"
+msgstr "Botswana"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Andorra"
+msgstr "Andorra"
+
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "(default value: %s)"
+msgstr "default"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
+msgstr "hari dan."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (Letter)"
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
+msgstr "DHCP Pelayan Konfigurasikan DHCP"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Choose an X server"
+msgstr ""
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Swap partition size in MB: "
+msgstr "dalam "
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No changes to backup!"
+msgstr "Tidak!"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Formatted\n"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Type of install"
+msgstr "Jenis"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "on SMB Tetingkap"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
+
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "%d comma separated numbers"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
+msgstr "on dalam on."
+
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Automatic Steps Configuration"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Barbados"
+msgstr "Barbados"
+
+#: ../../share/advertising/02-community.pl:1
+#, fuzzy, c-format
+msgid ""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
+msgstr "dan Buka dalam Bebas!"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please select data to backup..."
+msgstr ""
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
+msgstr "dalam."
+
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "received"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Enable su only from the wheel group members or for any user"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "/File/_New"
+msgstr "Fail"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The DNS Server IP"
+msgstr "Pelayan"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "IP Range End:"
+msgstr "IP Akhir:"
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "High"
+msgstr "Tinggi"
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Add a new printer to the system"
+msgstr "Tambah Kumpulan"
+
+#: ../../any.pm:1
+#, c-format
+msgid "NoVideo"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "this field describes the device"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Pejabat"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Local Printers"
+msgstr ""
+
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid "Installation image directory"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "NIS Server"
+msgstr "NIS"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Port: %s"
+msgstr "Liang"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Spain"
+msgstr "Sepanyol"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "local config: %s"
+msgstr "lokal"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "This user name has already been added"
+msgstr "pengguna"
+
+#: ../../interactive.pm:1
+#, c-format
+msgid "Choose a file"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Apply"
+msgstr "Terap"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Auto-detect available ports"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "San Marino"
+msgstr "San Marino"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Internet"
+
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "Belgium"
+msgstr "Belgium"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Kuwait"
+msgstr "Kuwait"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Choose the window manager to run:"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "December"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "sub generation of the cpu"
+msgstr ""
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "First Time Wizard"
+msgstr "Masa"
+
+#: ../../install_steps.pm:1
+#, fuzzy, c-format
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
+msgstr "ralat."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Taiwan"
+msgstr "Taiwan"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Pakistan"
+msgstr "Pakistan"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "please wait, parsing file: %s"
+msgstr "fail"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Importance: "
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
+msgstr "Kepada danhttp://www.lexmark.com/ on dan Batal dan."
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Permissions"
+msgstr "Keizinan"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Provider name (ex provider.net)"
+msgstr ""
+
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
+msgstr "on on."
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Use the Windows partition for loopback"
+msgstr "Tetingkap"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (typewriter)"
+msgstr ""
+
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Connection type: "
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Graphical interface"
+msgstr "Grafikal"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Chad"
+msgstr "Chad"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "India"
+msgstr "India"
+
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree %s with 3D hardware acceleration"
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Slovakia"
+msgstr "Slovakia"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Singapore"
+msgstr "Singapura"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Cambodia"
+msgstr "Cambodia"
+
+#: ../../Xconfig/various.pm:1
+#, fuzzy, c-format
+msgid "Monitor HorizSync: %s\n"
+msgstr "Monitor"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Path"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
+msgstr "off on?"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr "on?"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add host"
+msgstr "Tambah"
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid ""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
+msgstr "dalam "
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
+msgstr "on Kongsi dalam dan Tersendiri pengguna"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr "on."
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "China (broadcast)"
+msgstr "China"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use quota for backup files."
+msgstr "fail."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer \"%s\"..."
+msgstr ""
+
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid ""
+"Do not allow execution of any binaries on the mounted\n"
+"file system. This option might be useful for a server that has file systems\n"
+"containing binaries for architectures other than its own."
+msgstr "on terpasang fail."
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Internet connection"
+msgstr "Internet"
+
+#: ../../modules/interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
+msgstr "Memuatkan?"
+
+#: ../../share/advertising/01-thanks.pl:1
+#, fuzzy, c-format
+msgid "Welcome to the Open Source world."
+msgstr "Selamat Datang Buka."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Bosnia and Herzegovina"
+msgstr "Bosnia Herzegovina"
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid ""
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "You must enter a host name or an IP address.\n"
+msgstr "IP"
+
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "Netherlands"
+msgstr "Belanda"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "fail"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Internal ISDN card"
+msgstr ""
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr "tidak"
+
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Title"
+msgstr "Tajuk"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Install & convert Fonts"
+msgstr "Install"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "WARNING"
+msgstr "AMARAN"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installing bootloader"
+msgstr ""
+
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "replay"
+msgstr ""
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "detected %s"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Expect is an extension to the Tcl scripting language that allows interactive "
+"sessions without user intervention."
+msgstr "pengguna."
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Virgin Islands (U.S.)"
+msgstr "Virgin Islands (Amerika)"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Bad backup file"
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
+msgstr "Internet siap dimatikan?"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Enter IP address and port of the host whose printers you want to use."
+msgstr "Enter IP dan."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Pipe into command"
+msgstr ""
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
+msgstr "on"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Haiti"
+msgstr "Haiti"
+
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Detecting devices..."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Custom allows you to specify your own day and time.  The other options use "
+"run-parts in /etc/crontab."
+msgstr "Tersendiri dan dalam."
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"Description of the fields:\n"
+"\n"
+msgstr "Huraian"
+
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Basic options"
+msgstr "Asas"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "the name of the CPU"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, fuzzy, c-format
+msgid "Accept bogus IPv4 error messages"
+msgstr "Terima ralat"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Refreshing printer data..."
+msgstr ""
+
+#: ../../install2.pm:1
+#, c-format
+msgid "You must also format %s"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Be careful: this operation is dangerous."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Insert a floppy containing package selection"
+msgstr ""
+
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "Server: "
+msgstr "Pelayan "
+
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Alerts:"
+msgstr "Keselamatan:"
+
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Sweden"
+msgstr "Sweden"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Expect for SSH"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Poland"
+msgstr "Poland"
+
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Other ports"
+msgstr "Liang Lain"
+
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "number of capture buffers for mmap'ed capture"
+msgstr ""
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "SMBus controllers"
+msgstr ""
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Connection timeout (in sec)"
+msgstr "dalam"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Croatian"
+msgstr "Croatia"
+
+#: ../../help.pm:1
+#, c-format
+msgid "Use existing partition"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Unable to contact mirror %s"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "/Help/_About..."
+msgstr "Bantuan Perihal."
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Remove user directories before restore."
+msgstr "Buang pengguna."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
+msgstr "on?"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "CUPS printer configuration"
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "could not find any font in your mounted partitions"
+msgstr "dalam terpasang"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "F00f bug"
+msgstr ""
+
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree %s"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Domain Name:"
+msgstr "Domain Nama:"
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Root umask"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "On Floppy"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Reboot by the console user"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore"
+msgstr ""
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr "ya dalam."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Looking for available packages..."
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Init Message"
+msgstr ""
+
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Rescue partition table"
+msgstr "Penyelamatan"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Cyprus"
+msgstr "Cyprus"
+
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "Connection complete."
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Remove from RAID"
+msgstr "Buang"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr ""
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Configuration Wizards"
+msgstr "Konfigurasikan"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "ISDN connection"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "CD-R / DVD-R"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "primary"
+msgstr ""
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr "on SMB Tetingkap"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr "mula on dan default mula on Masuk!"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Niue"
+msgstr "Niue"
+
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Skip"
+msgstr "Langkah"
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr "mula."
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr "dalam dalam"
+
+#: ../../standalone/printerdrake:1
+#, c-format
+msgid "Mandrake Linux Printer Management Tool"
+msgstr ""
+
+#: ../../pkgs.pm:1
+#, c-format
+msgid "important"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Total Progress"
+msgstr "Jumlah"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+"        \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+"        \t\tin this respect by adding or removing system users from this "
+"file."
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr "dalam on dalam secara manual secara manual."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Aruba"
+msgstr "Aruba"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Users"
+msgstr "Pengguna"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Preparing bootloader..."
+msgstr ""
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Gateway (e.g. %s)"
+msgstr "Gateway"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "The passwords do not match"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Examples for correct IPs:\n"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please choose the media for backup."
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Frequency (MHz)"
+msgstr ""
+
+#: ../../install_any.pm:1
+#, fuzzy, c-format
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
+msgstr "Kepada"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "the number of the processor"
+msgstr ""
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Hardware clock set to GMT"
+msgstr "Perkakasan"
+
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Do you want to start a new configuration ?"
+msgstr "mula?"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Give a file name"
+msgstr "fail"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Please choose the port that your printer is connected to."
+msgstr ""
+
+#: ../../standalone/livedrake:1
+#, fuzzy, c-format
+msgid "Change Cd-Rom"
+msgstr "Ubah"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Paraguay"
+msgstr "Paraguay"
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Configuration is complete, do you want to apply settings ?"
+msgstr "Konfigurasikan?"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Incremental/Differential Backups  (do not replace old backups)"
+msgstr ""
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "There's no known driver for your sound card (%s)"
+msgstr "tidak"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "force"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Exit"
+msgstr "Keluar"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
+msgstr "on dan."
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid ""
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
+msgstr "on"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Estonian"
+msgstr "Estonia"
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr "fail dan."
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr "Enter\n"
+
+#: ../../standalone/draksec:1
+#, c-format
+msgid "ALL"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Add/Del Clients"
+msgstr "Tambah"
+
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid "Choose the network interface"
+msgstr ""
+
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Unknown Model"
+msgstr "Entah"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "CD/DVD burners"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"Partition booted by default\n"
+"    (for MS-DOS boot, not for lilo)\n"
+msgstr "Partisyen default\n"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Enable \"%s\" to read the file"
+msgstr ""
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "choose image"
+msgstr ""
+
+#: ../../network/shorewall.pm:1
+#, c-format
+msgid "Firewalling configuration detected!"
+msgstr ""
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Connection name"
+msgstr ""
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Updating package selection"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "fail?"
+
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid ""
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD-R/DVD-R to backup"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "the number of buttons the mouse has"
+msgstr ""
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Replay"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup other files"
+msgstr ""
+
+#: ../../install_steps.pm:1
+#, fuzzy, c-format
+msgid "No floppy drive available"
+msgstr "Tidak"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup files are corrupted"
+msgstr "fail"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "TV norm:"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Cpuid family"
+msgstr ""
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "32 MB"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "type: thin"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian AZERTY (new)"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr "ya"
+
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr "RAD"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Other OS (MacOS...)"
+msgstr "Lain-lain"
+
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "To activate the mouse,"
+msgstr "Kepada"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Bringing up the network"
+msgstr ""
+
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Screenshots will be available after install in %s"
+msgstr "dalam"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"on dalam Tetingkap dan\n"
+" on\n"
+" on\n"
+" on\n"
+" on Tetingkap Tetingkap C."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Tanzania"
+msgstr "Tanzania"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Computing FAT filesystem bounds"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "custom"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Content of the file"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Authentication LDAP"
+msgstr "Pengesahan"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Let me pick any driver"
+msgstr ""
+
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "Profile "
+msgstr ""
+
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "transmitted"
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Palestine"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "RAID md%s\n"
+msgstr "RAD"
+
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "%d comma separated strings"
+msgstr ""
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid " isdn"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Here is the full list of keyboards available"
+msgstr "penuh"
+
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Theme name"
+msgstr "Tema"
+
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "/_Help"
+msgstr "/_Bantuan"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Choosing an arbitrary driver"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Cook Islands"
+msgstr "Kepulauan Cook"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr "dan."
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "the width of the progress bar"
+msgstr ""
+
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Formatting partition %s"
+msgstr "Memformat"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hostname required"
+msgstr "Namahos"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselect fonts installed"
+msgstr ""
+
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakperm:1
+#: ../../standalone/draksec:1 ../../standalone/logdrake:1
+#: ../../standalone/mousedrake:1 ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Cancel"
+msgstr "Batal"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for configured scanners ..."
+msgstr "Mencari."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Wheel"
+msgstr ""
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Videocard"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "\tBackups use tar and bzip2\n"
+msgstr "dan"
+
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove Selected"
+msgstr "Buang"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "/Autodetect _modems"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove printer"
+msgstr "Buang"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "View Last Log"
+msgstr ""
+
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "Internet?"
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Connection Type"
+msgstr "Jenis Perhubungan:"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr "Selamat Datang"
+
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Other"
+msgstr "Lain-lain"
+
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1 ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Default"
+msgstr "Default"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Button 2 Emulation"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Run chkrootkit checks"
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "type1inst building"
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Abiword"
+msgstr ""
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "choose image file"
+msgstr ""
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "X server"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Domain Admin User Name"
+msgstr "Domain Pengguna"
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "There was an error while scanning for TV channels"
+msgstr "ralat"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "US keyboard (international)"
+msgstr ""
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Not installed"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Both Alt keys simultaneously"
+msgstr "Alt"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "LAN connection"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "/File/-"
+msgstr "Fail"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Italian"
+msgstr "Itali"
+
+#: ../../interactive.pm:1
+#, fuzzy, c-format
+msgid "Basic"
+msgstr "Asas"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+" C"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Honduras"
+msgstr "Honduras"
+
+#: ../../help.pm:1
+#, c-format
+msgid "pdq"
+msgstr ""
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Card IO"
+msgstr ""
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "when checked, owner and group won't be changed"
+msgstr "dan"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr "on on."
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "\t-Network by FTP.\n"
+msgstr "Rangkaian FTP"
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Reports check result to tty"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "You must enter a device or file name!"
+msgstr "fail!"
+
+#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1
+#, c-format
+msgid "/_Quit"
+msgstr ""
+
+#: ../../Xconfig/various.pm:1
+#, fuzzy, c-format
+msgid "Graphics memory: %s kB\n"
+msgstr "Grafik"
+
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr "dan Umum Bebas dalam A Umum Umum Bebas"
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to compilation tools"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please select data to restore..."
+msgstr ""
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Standard test page"
+msgstr ""
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Create"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "What"
+msgstr ""
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "There was an error ordering packages:"
+msgstr "ralat:"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Bulgarian (BDS)"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Disable Server"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Filesystem encryption key"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Gujarati"
+msgstr ""
+
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr "Enter "
+
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Save theme"
+msgstr "Simpan"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Brazil"
+msgstr "Brazil"
+
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Auto Install"
+msgstr ""
+
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Network Configuration Wizard"
+msgstr "Rangkaian Konfigurasikan"
+
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Removable media automounting"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Enter the directory to save:"
+msgstr "Enter direktori:"
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Printing"
+msgstr "Cetakan"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr "tidak"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Create a new partition"
+msgstr ""
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Driver:"
+msgstr "Jurupacu:"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "unknown"
+msgstr "tidak diketahui"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Use fdisk"
+msgstr ""
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "MOVE YOUR WHEEL!"
+msgstr ""
+
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "sent: "
+msgstr ""
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "Automatic IP"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+"   Note that two different options are available after clicking the button:\n"
+"\n"
+"    * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+"    * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+"   This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"dan mula\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" on\n"
+" dalam dan dan"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Moldova"
+msgstr "Moldova"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Kensington Thinking Mouse"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuration of a remote printer"
+msgstr "Konfigurasikan"
+
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, c-format
+msgid "An online platform to respond to enterprise support needs."
+msgstr ""
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "URL"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Oriya"
+msgstr ""
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Add a new rule at the end"
+msgstr "Tambah"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "LiLo and Bootsplash themes installation successful"
+msgstr "dan"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr "on on."
+
+#: ../../modules/interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr "dalam"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Quit without writing the partition table?"
+msgstr "Keluar?"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Genius NetScroll"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "On Hard Drive"
+msgstr "on"
+
+#: ../../standalone.pm:1
+#, c-format
+msgid "Installing packages..."
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Dutch"
+msgstr "Belanda"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Angola"
+msgstr "Angola"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "The following packages need to be installed:\n"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "service setting"
+msgstr ""
+
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#, fuzzy, c-format
+msgid "Custom"
+msgstr "Tersendiri"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Latvia"
+msgstr "Latvia"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "File is already used by another loopback, choose another one"
+msgstr "Fail"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Read-only"
+msgstr ""
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Enable/Disable name resolution spoofing protection.  If\n"
+"\"alert\" is true, also reports to syslog."
+msgstr ""
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "No known driver"
+msgstr "Tidak"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "1 MB"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
+msgstr "fail dalam"
+
+#: ../../standalone/draksound:1
+#, fuzzy, c-format
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
+"Tidak Bunyi on Bunyi dalam\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
+"either be 'thin'\n"
+"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
+"while fat clients run \n"
+"\t\t\tmost software on the client machine. A special inittab, /etc/inittab\\$"
+"\\$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are \n"
+"\t\t\tmodified if thin clients are used, to enable xdmcp. Since there are "
+"security issues in \n"
+"\t\t\tusing xdmcp, hosts.deny and hosts.allow are modified to limit access "
+"to the local\n"
+"\t\t\tsubnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#hdw_config\" entry is also only used by drakTermServ.  "
+"Clients can either \n"
+"\t\t\tbe 'true' or 'false'.  'true' enables root login at the client machine "
+"and allows local \n"
+"\t\t\thardware configuration of sound, mouse, and X, using the 'drak' tools. "
+"This is enabled \n"
+"\t\t\tby creating separate config files associated with the client's IP "
+"address and creating \n"
+"\t\t\tread/write mount points to allow the client to alter the file. Once "
+"you are satisfied \n"
+"\t\t\twith the configuration, you can remove root login privileges from the "
+"client.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing clients."
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Configure Local Area Network..."
+msgstr "Rangkaian."
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Verify checksum of the suid/sgid files"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Launch the sound system on your machine"
+msgstr "on"
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Run some checks against the rpm database"
+msgstr ""
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Execute"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Preparing printer database..."
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Information"
+msgstr "Maklumat"
+
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "No network card"
+msgstr "Tidak"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#, c-format
+msgid "Which filesystem do you want?"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Malta"
+msgstr "Malta"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Detailed information"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
+msgstr "default dan dan."
+
+#: ../../install_any.pm:1
+#, c-format
+msgid "This floppy is not FAT formatted"
+msgstr ""
+
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Configuring network"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"This option will save files that have changed.  Exact behavior depends on "
+"whether incremental or differential mode is used."
+msgstr "fail on."
+
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Graphic Card"
+msgstr ""
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Resizing Windows partition"
+msgstr "Tetingkap"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Cameroon"
+msgstr "Cameroon"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Provider dns 1 (optional)"
+msgstr ""
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
+msgstr "siap"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Saami (swedish/finnish)"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Close"
+msgstr "Tutup"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
+msgstr "dalam on dan dalam."
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Calendar"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Restore Selected\n"
+"Catalog Entry"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
+msgstr "Kepada lpd dan on."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Iceland"
+msgstr "Iceland"
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Network & Internet Configuration"
+msgstr "Konfigurasi Rangkaian"
+
+#: ../../common.pm:1
+#, c-format
+msgid "consolehelper missing"
+msgstr ""
+
+#: ../../services.pm:1
+#, c-format
+msgid "stopped"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Whether the FPU has an irq vector"
+msgstr ""
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Ext2"
+msgstr ""
+
+#: ../../ugtk2.pm:1
+#, c-format
+msgid "Expand Tree"
+msgstr ""
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid ""
+"The old \"%s\" driver is blacklisted.\n"
+"\n"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
+msgstr "on on."
+
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Expert Mode"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer options"
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Local Network adress"
+msgstr "Rangkaian"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup your System files. (/etc directory)"
+msgstr "Sistem fail direktori"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "Set the user umask."
+msgstr "pengguna."
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
+msgstr "Internet?"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Samba Server"
+msgstr "Pengguna Samba"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Australian Optus cable TV"
+msgstr ""
+
+#: ../../install_steps_newt.pm:1
+#, fuzzy, c-format
+msgid ""
+"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
+msgstr ""
+"  <Tab>/<Alt-Tab> Antara unsur   |  <Space> pilih   |  <F12> Skrin "
+"seterusnya "
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Subnet:"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Zimbabwe"
+msgstr "Zimbabwe"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "When"
+msgstr ""
+
+#: ../../network/adsl.pm:1
+#, fuzzy, c-format
+msgid ""
+"You need the Alcatel microcode.\n"
+"Download it at:\n"
+"%s\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
+"\n"
+"%s dalam"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Hour"
+msgstr ""
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Second DNS Server (optional)"
+msgstr "Pelayan"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Finland"
+msgstr "Finland"
+
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Color depth: %s\n"
+msgstr ""
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "You can't unselect this package. It must be upgraded"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Loading from floppy"
+msgstr "Memuatkan"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Slovenia"
+msgstr "Slovenia"
+
+#: ../../standalone/mousedrake:1
+#, fuzzy, c-format
+msgid "Mouse test"
+msgstr "Tetikus"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid ""
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
+msgstr "fail dalam dan default."
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr "Enter pengguna"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr "dan USB dan USB"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "ProgressBar color selection"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid ""
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
+msgstr "on."
+
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/hda"
+msgstr ""
+
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/hdb"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+"        \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+"        \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+"        \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
+msgstr "dan."
+
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Radio support:"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Installing SANE packages..."
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "LDAP"
+msgstr "LDAP"
+
+#: ../../bootloader.pm:1
+#, c-format
+msgid "SILO"
+msgstr ""
+
+#: ../../diskdrake/removable.pm:1
+#, fuzzy, c-format
+msgid "Change type"
+msgstr "Ubah"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ", USB printer #%s"
+msgstr "USB"
+
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr ""
+
+#: ../../install_messages.pm:1
+#, fuzzy, c-format
+msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
+msgstr "Tahniah dan on on dalam Pengguna."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "paranoid"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Do not send mails when unneeded"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Your scanner(s) will not be available on the network."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr "dalam Cetakan fail fail"
+
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#, fuzzy, c-format
+msgid "Resolution"
+msgstr "Resolusi"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
+msgstr "Kepada SMB SMB IP dan IP dan pengguna dan."
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr "pengguna."
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "reconfigure"
+msgstr ""
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Shell timeout"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Xinetd Service"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to network tools"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr ""
+
+#: ../../share/advertising/03-software.pl:1
+#, fuzzy, c-format
+msgid ""
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
+msgstr "bunyi fail dan."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr "Ralat?"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
+"siap\n"
+" on."
+
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Please fill or check the field below"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Do you want to save /etc/fstab modifications"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Boot Protocol"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "LVM-disks %s\n"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "The package %s is needed. Install it?"
+msgstr "Install?"
+
+#: ../../services.pm:1
+#, c-format
+msgid "On boot"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Bus identification"
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Vatican"
+msgstr ""
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Please make a backup of your data first"
+msgstr ""
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "on?"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Eritrea"
+msgstr "Eritrea"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Boot ISO"
+msgstr ""
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "Firmware needed"
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove List"
+msgstr "Buang"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, fuzzy, c-format
+msgid "A customizable environment"
+msgstr "A"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Inuktitut"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Some protocols, like rsync, may be configured at the server end.  Rather "
+"than using a directory path, you would use the 'module' name for the service "
+"path."
+msgstr "protokol direktori."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Morocco"
+msgstr "Morocco"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Which printer model do you have?"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Add a new printer"
+msgstr "Tambah"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "          All of your selected data have been          "
+msgstr "Semua "
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Nepal"
+msgstr "Nepal"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "<-- Delete"
+msgstr ""
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "cpu # "
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "chunk size"
+msgstr ""
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
+"\n"
+"If set to NONE, no issues are allowed.\n"
+"\n"
+"Else only /etc/issue is allowed."
+msgstr "dan tidak."
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid " Enable/Disable sulogin(8) in single user level."
+msgstr "dalam tunggal pengguna."
+
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "commands before booting, or 'c' for a command-line."
+msgstr ""
+
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#, c-format
+msgid "Problems installing package %s"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "You will receive an alert if the load is higher than this value"
+msgstr ""
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
+msgstr ""
+"on on\n"
+" dalam"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add a scanner manually"
+msgstr "Tambah"
+
+#: ../../standalone/printerdrake:1
+#, c-format
+msgid "Refresh"
+msgstr ""
+
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Reload partition table"
+msgstr "Ulangmuat"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Ya pengguna"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore Selected"
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Search for fonts in installed list"
+msgstr "Cari dalam"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "Rangkaian keluar."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Boot"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " and the CD is in the drive"
+msgstr ""
+
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Tuner type:"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"Lain-lain\n"
+" keluar dan dan\n"
+" Cetakan Sistem lokal dan lpd asas lpd on lpd dan dan dan."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "\"Menu\" key"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
+msgstr "Cari dalam."
+
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Administrator:"
+msgstr "Keselamatan:"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "Set the shell timeout. A value of zero means no timeout."
+msgstr "A tidak."
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "Firmware copy succeeded"
+msgstr ""
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr "ya fail dalam."
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid ""
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
+msgstr "Internet on"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Fonts copy"
+msgstr "Font"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automated"
+msgstr ""
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
+msgstr "Pejabat."
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Save packages selection"
+msgstr "Simpan"
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "/_Actions"
+msgstr "Aksi"
+
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Remove the last item"
+msgstr "Buang"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr "Pengguna pengguna"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No net boot images created!"
+msgstr "Tidak!"
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "use pptp"
+msgstr ""
+
+#: ../../services.pm:1
+#, c-format
+msgid "Choose which services should be automatically started at boot time"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, fuzzy, c-format
+msgid "Check files/directories writable by everybody"
+msgstr "fail"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Learn how to use this printer"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configure the network now"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose a mirror from which to get the packages"
+msgstr ""
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
+msgstr "ralat"
+
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Size: "
+msgstr "Saiz: "
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Which sector do you want to move it to?"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Bahamas"
+msgstr "Bahamas"
+
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Do you want to click on this button?"
+msgstr "on?"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Manual configuration"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "search"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
+msgstr "dalam dihidupkan."
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Xpmac (installation display driver)"
+msgstr ""
+
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Zeroconf host name must not contain a ."
+msgstr ""
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid " Accept/Refuse icmp echo."
+msgstr "Terima."
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files.  It is a good idea to always run syslog."
+msgstr "fail."
+
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown/Others"
+msgstr "Entah"
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "No TV Card detected!"
+msgstr "Tidak!"
+
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Options"
+msgstr "Pilihan"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "default."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
+msgstr "dan."
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Auto-detected"
+msgstr ""
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid ""
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr "DHCP on lokal Rangkaian Internet Rangkaian Rangkaian."
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independent "
+"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
+"and limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr "Buka Bunyi Sistem on asas dan Lanjutan Bunyi USB dan"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
+msgstr "Tidak Install dalam"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the printer you want to set up or enter a device name/file "
+"name in the input line"
+msgstr "fail dalam"
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Refuse"
+msgstr ""
+
+#: ../../standalone/draksec:1
+#, c-format
+msgid "LOCAL"
+msgstr ""
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
+msgstr "dan."
+
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Creating and formatting file %s"
+msgstr "Mencipta dan fail"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr "ya fail."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
+msgstr "on Tetingkap on dan fail fail dan fail Salin fail direktori dan dan on"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose an existing LVM to add to"
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "xfs restart"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "No partition available"
+msgstr "Tidak"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Use the scanners on hosts: "
+msgstr "on hos "
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselected All"
+msgstr ""
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Printer Management \n"
+msgstr "Baru"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Domain Name Resolver"
+msgstr "Domain Nama"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Encryption key (again)"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Samba share name missing!"
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "True Type install done"
+msgstr "Jenis"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Detection in progress"
+msgstr "dalam"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Build Whole Kernel -->"
+msgstr ""
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "modem"
+msgstr ""
+
+#: ../../install_steps.pm:1
+#, fuzzy, c-format
+msgid "Welcome to %s"
+msgstr "Selamat datang ke %s"
+
+#: ../../standalone/drakhelp:1
+#, c-format
+msgid ""
+" drakhelp 0.1\n"
+"Copyright (C) 2003 MandrakeSoft.\n"
+"This is free software and may be redistributed under the terms of the GNU "
+"GPL.\n"
+"\n"
+"Usage: \n"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Kemaskini saja dalam"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"is directly connected to your system"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "on hos "
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
+msgstr ""
+
+#: ../../modules/interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
+msgstr "Masuk."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
+"\n"
+"%s\n"
+"\n"
+"Click on Configure to launch the setup wizard."
+msgstr "Selamat Datang Internet on."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Cuba"
+msgstr "Cuba"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "October"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Belize"
+msgstr "Belize"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Searching for new printers..."
+msgstr "Mencari."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " (multi-session)"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Kernel Boot Timeout"
+msgstr ""
+
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr "dalam."
+
+#: ../../security/help.pm:1
+#, c-format
+msgid " Activate/Disable daily security check."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-CD-R.\n"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, fuzzy, c-format
+msgid "Enable libsafe if libsafe is found on the system"
+msgstr "on"
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "Pempartisyenan:"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Hungarian"
+msgstr ""
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid ""
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automatic time synchronization (using NTP)"
+msgstr ""
+
+#: ../../network/adsl.pm:1
+#, fuzzy, c-format
+msgid "Use my Windows partition"
+msgstr "Tetingkap"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "8 MB"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "LDAP Server"
+msgstr "LDAP"
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops.  It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
+msgstr "dan dalam on."
+
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Choose your country"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"- System Files:\n"
+msgstr "Sistem"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Per client system configuration files:\n"
+"        \t\tThrough clusternfs, each diskless client can have its own unique "
+"configuration files\n"
+"        \t\ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
+"\t\t\t\tclients can customize files such as /etc/modules.conf, /etc/"
+"sysconfig/mouse, \n"
+"        \t\t/etc/sysconfig/keyboard on a per-client basis.\n"
+"\n"
+"        Note: Enabling local client hardware configuration does enable root "
+"login to the terminal \n"
+"        server on each client machine that has this feature enabled.  Local "
+"configuration can be turned\n"
+"        back off, retaining the configuration files, once the client machine "
+"is configured."
+msgstr ""
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Standalone Tools"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Where"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "but not matching"
+msgstr ""
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Configuring PCMCIA cards..."
+msgstr ""
+
+#: ../../common.pm:1
+#, c-format
+msgid "kdesu missing"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "%s: %s requires a username...\n"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Encryption key"
+msgstr ""
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid ""
+"This setting will be activated after the installation.\n"
+"During installation, you will need to use the Right Control\n"
+"key to switch between the different keyboard layouts."
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Christmas Island"
+msgstr "Kepulauan Krismas"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "ralat:"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "EIDE/SCSI channel"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Set this printer as the default"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Verify that %s is the correct path"
+msgstr ""
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "partition %s"
+msgstr ""
+
+#: ../../security/level.pm:1
+#, c-format
+msgid "Paranoid"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "NIS"
+msgstr "NIS"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "<-- Del User"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Location on the bus"
+msgstr "Lokasi on"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "No printer found!"
+msgstr "Tidak!"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "the vendor name of the device"
+msgstr ""
+
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Erase entire disk"
+msgstr ""
+
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid " (Default)"
+msgstr "Default"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Automatic reconfiguration"
+msgstr ""
+
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "Receiving Speed:"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Turks and Caicos Islands"
+msgstr "Kepulauan Caicos dan Turks"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "No Ip"
+msgstr ""
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#, c-format
+msgid "<- Previous"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Transfer Now"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Set root password and network authentication methods"
+msgstr "dan"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Internet Connection Sharing configuration"
+msgstr "Internet"
+
+#: ../../ugtk2.pm:1
+#, fuzzy, c-format
+msgid "Toggle between flat and group sorted"
+msgstr "dan"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Themes"
+msgstr "Tema"
+
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Options: %s"
+msgstr "Pilihan"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid ""
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
+msgstr "on."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "OKI winprinter configuration"
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Saint Helena"
+msgstr "Santa Helena"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Parallel port #%s"
+msgstr "on"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Security Level"
+msgstr "Keselamatan"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid ""
+"Some steps are not completed.\n"
+"\n"
+"Do you really want to quit now?"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Sudan"
+msgstr "Sudan"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Polish (qwertz layout)"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Syria"
+msgstr "Syria"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), "
+"an HP PhotoSmart or an HP LaserJet 2200?"
+msgstr ""
+
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
+#, fuzzy, c-format
+msgid ""
+"Welcome to %s the operating system chooser!\n"
+"\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
+"\n"
+msgstr "Selamat Datang saat default"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Portuguese"
+msgstr "Portugis"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Loopback file name: "
+msgstr "fail "
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "dalam"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Left Control key"
+msgstr "Kiri"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Serbia"
+msgstr ""
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Newzealand"
+msgstr ""
+
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "This directory should remain within the root filesystem"
+msgstr "direktori"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Across Network"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "CapsLock key"
+msgstr ""
+
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Install bootloader"
+msgstr "Install"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Select the memory size of your graphics card"
+msgstr ""
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Enable/Disable crontab and at for users.\n"
+"\n"
+"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
+"and crontab(1))."
+msgstr "dan dalam dan."
+
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
+msgstr "Internet dan default Kepada."
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Dynamic IP Address Pool:"
+msgstr "IP Alamat:"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "LVM name?"
+msgstr ""
+
+#: ../../standalone/service_harddrake:1
+#, fuzzy, c-format
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "dalam"
+
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Found %s %s interfaces"
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Install"
+msgstr "Pasca Pasang"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The internal domain name"
+msgstr ""
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Card IRQ"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "logdrake"
+msgstr ""
+
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid ""
+"Font Importation and monitoring "
+"application                                     \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts      : show all fonts that already exist from xls\n"
+"--strong         : strong verification of font.\n"
+"--install        : accept any font file and any directry.\n"
+"--uninstall      : uninstall any font or any directory of font.\n"
+"--replace        : replace all font if already exist\n"
+"--application    : 0 none application.\n"
+"                 : 1 all application available supported.\n"
+"                 : name_of_application like  so for staroffice \n"
+"                 : and gs for ghostscript for only this one."
+msgstr ""
+"Font dan terima fail dan direktori tiada\n"
+"\n"
+"\n"
+" dan."
+
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr "lpd"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr ""
+
+#: ../../bootloader.pm:1 ../../help.pm:1
+#, c-format
+msgid "LILO with text menu"
+msgstr ""
+
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Everything (no firewall)"
+msgstr "Semuanya tidak"
+
+#: ../../any.pm:1
+#, c-format
+msgid "You must specify a kernel image"
+msgstr ""
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", multi-function device on USB"
+msgstr "on"
+
+#: ../../interactive/newt.pm:1
+#, c-format
+msgid "Do"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian AZERTY (old)"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Brazilian (ABNT-2)"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "IP address of host/network:"
+msgstr "IP:"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid ""
+"the progress bar y coordinate\n"
+"of its upper left corner"
+msgstr ""
+
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "Sistem"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Saint Vincent and the Grenadines"
+msgstr "dan"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "Allow/Forbid reboot by the console user."
+msgstr "pengguna."
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "/File/_Open"
+msgstr "Fail"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "Lokasi"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Open Firmware Delay"
+msgstr "Buka"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Hungary"
+msgstr "Hungary"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "New Zealand"
+msgstr "New Zealand"
+
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "Color configuration"
+msgstr ""
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid ""
+"There are already some restrictions, and more automatic checks are run every "
+"night."
+msgstr "dan."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "please choose the date to restore"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Netherlands Antilles"
+msgstr "Netherlands Antilles"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Switching from ext2 to ext3"
+msgstr ""
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPRng"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Browse to new restore repository."
+msgstr "Lungsur."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
+msgstr "lokal dan dalam dan dan."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
+msgstr "dan tidak diketahui"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
+msgstr "dalam"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Backup quota exceeded!\n"
+"%d MB used vs %d MB allocated."
+msgstr ""
+
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "Tidak on."
+
+#: ../../common.pm:1
+#, c-format
+msgid "GB"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please give a user name"
+msgstr "pengguna"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Enable CD Boot?"
+msgstr ""
+
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid " enter `void' for void entry"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backups on unmountable media - Use Catalog to restore"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "January"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, fuzzy, c-format
+msgid "Password history length"
+msgstr "Katalaluan"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Winmodem connection"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
+msgstr "dan dalam Fail default dalam Perkakasan."
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr ""
+
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "%s on %s"
+msgstr "%s pada %s"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "Allow/Forbid remote root login."
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"dalam Masa dan on lokal dan dalam hos Tetingkap on Internet Internet on "
+"lokal."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Which is your timezone?"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Can't create log file!"
+msgstr "fail!"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use .backupignore files"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Guinea"
+msgstr "Guinea"
+
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "The system is now connected to the Internet."
+msgstr "Internet."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Selatan Georgia dan Selatan"
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Japan (broadcast)"
+msgstr "Jepun"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is incorrect, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"Monitor\n"
+" dan."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Mozambique"
+msgstr "Mozambique"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Icon"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please choose what you want to backup"
+msgstr ""
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "256 colors (8 bits)"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Read-write"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Size: %s\n"
+msgstr "Saiz"
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Hostname: "
+msgstr "Namahos "
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Add a rule"
+msgstr "Tambah"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Chunk size %s\n"
+msgstr ""
+
+#: ../../share/advertising/02-community.pl:1
+#, c-format
+msgid "Build the future of Linux!"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Local Printer"
+msgstr ""
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "Floppy access error, unable to mount device %s"
+msgstr ""
+
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "fail"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "ADSL connection"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "Tidak Lanjutan"
+
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Error!"
+msgstr "Ralat!"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "cable connection detected"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Permission denied transferring %s to %s"
+msgstr ""
+
+#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1
+#, c-format
+msgid "/_Report Bug"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Dominica"
+msgstr "Dominica"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resize"
+msgstr ""
+
+#: ../../Xconfig/various.pm:1
+#, fuzzy, c-format
+msgid "Resolution: %s\n"
+msgstr "Resolusi"
+
+#: ../../install2.pm:1
+#, fuzzy, c-format
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr "fail dalam dalam"
+
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "The following packages are going to be removed"
+msgstr ""
+
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#, fuzzy, c-format
+msgid "Connect to the Internet"
+msgstr "Sambung"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Use existing partitions"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Canadian (Quebec)"
+msgstr ""
+
+#: ../../Xconfig/various.pm:1
+#, fuzzy, c-format
+msgid "Mouse device: %s\n"
+msgstr "Tetikus"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Reselect correct fonts"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - /etc/xinetd.d/tftp:\n"
+"        \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+"        \t\tdiskless client.\n"
+"\n"
+"        \t\tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \t\tservice tftp\n"
+"\t\t\t{\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t\t}\n"
+"        \t\t\n"
+"        \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+"        \t\tputs its images."
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
+"Pilihan\n"
+"."
+
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, c-format
+msgid "MandrakeExpert Corporate"
+msgstr ""
+
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+" [everything]\n"
+"       XFdrake [--noauto] monitor\n"
+"       XFdrake resolution"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Write protection"
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "You've not selected any font"
+msgstr ""
+
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Language"
+msgstr "Bahasa"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer model selection"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr "on"
+
+#: ../../common.pm:1
+#, c-format
+msgid "%d seconds"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Insert a blank floppy in drive %s"
+msgstr "dalam"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "A valid URI must be entered!"
+msgstr "A!"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Re-configure interface and DHCP server"
+msgstr "dan DHCP"
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Sound configuration"
+msgstr "Bunyi"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Photo test page"
+msgstr ""
+
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Custom disk partitioning"
+msgstr "Tersendiri"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Enter Printer Name and Comments"
+msgstr "Enter Nama dan"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr ""
+
+#: ../../network/modem.pm:1
+#, c-format
+msgid "You don't have any winmodem"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "type: %s"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTY)"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"This should be a comma-separated list of local users or email addresses that "
+"you want the backup results sent to. You will need a functioning mail "
+"transfer agent setup on your system."
+msgstr "lokal on."
+
+#: ../../standalone/draksound:1
+#, fuzzy, c-format
+msgid "No Sound Card detected!"
+msgstr "Tidak Bunyi!"
+
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#, fuzzy, c-format
+msgid "Mouse Port"
+msgstr "Liang Tetikus"
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Check for unsecured accounts"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
+msgstr "ulanghidup Paparan penuh ulanghidup"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Ftp Server"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Uganda"
+msgstr "Uganda"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "%s fonts conversion"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "on"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
+"\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
+"\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
+"\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
+"\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
+"\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
+"\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
+"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
+"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
+"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
+msgstr ""
+"on on\n"
+" dan\n"
+" dalam on dan dalam\n"
+" default on on\n"
+" dan on\n"
+" on on\n"
+" on on on dan\n"
+" default dalam on\n"
+" on dan on secara manual\n"
+" on on\n"
+" Internet lokal\n"
+" dalam\n"
+" Internet\n"
+"\n"
+"."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Comoros"
+msgstr "Comoros"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "May"
+msgstr ""
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr ""
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr ""
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid ""
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+msgstr "dalam."
+
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Generik"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Select another media to restore from"
+msgstr ""
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr ""
+
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Re-submit"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "CD in place - continue."
+msgstr "dalam."
+
+#: ../../common.pm:1
+#, c-format
+msgid "KB"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Network & Internet"
+msgstr "Rangkaian"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Net Boot Images"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Sharing of local scanners"
+msgstr "lokal"
+
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Services and deamons"
+msgstr "Perkhidmatan dan"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Remote host name missing!"
+msgstr ""
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "with /usr"
+msgstr ""
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Network"
+msgstr "Rangkaian"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "This password is too simple"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Chkconfig obey msec rules"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTZ)"
+msgstr ""
+
+#: ../../share/advertising/06-development.pl:1
+#, fuzzy, c-format
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr "Kepada dan dalam Python C dan C dan Buka."
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No devices found"
+msgstr "Tidak"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "tidak"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use daemon"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakauth:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Authentication"
+msgstr "Pengesahan"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Tambah Pejabat"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Additional CUPS servers: "
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
+msgstr "IP dan default dalam."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Algeria"
+msgstr "Algeria"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore Via Network"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr "Masuk."
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "\tBackups use tar and gzip\n"
+msgstr "dan"
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Set as default"
+msgstr "default"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "2 MB"
+msgstr ""
+
+#: ../../printer/main.pm:1 ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Configured on this machine"
+msgstr "on"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Both Control keys simultaneously"
+msgstr ""
+
+#: ../../standalone/drakhelp:1
+#, c-format
+msgid " --help                - display this help     \n"
+msgstr ""
+
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid ""
+"[OPTION]...\n"
+"  --no-confirmation      don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+"  --no-verify-rpm        don't verify packages signatures\n"
+"  --changelog-first      display changelog before filelist in the "
+"description window\n"
+"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"\n"
+" tidak dalam\n"
+" tidak\n"
+" dalam\n"
+" fail"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Setting Default Printer..."
+msgstr "Default."
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Interface %s (using module %s)"
+msgstr "Antaramuka"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Generating preview ..."
+msgstr ""
+
+#: ../../network/network.pm:1
+#, c-format
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
+
+#: ../../standalone/draksec:1
+#, c-format
+msgid "ignore"
+msgstr ""
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Allow/Forbid X connections:\n"
+"\n"
+"- ALL (all connections are allowed),\n"
+"\n"
+"- LOCAL (only connection from local machine),\n"
+"\n"
+"- NONE (no connection)."
+msgstr "lokal tidak."
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", multi-function device on parallel port #%s"
+msgstr "on"
+
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "serial"
+msgstr "bersiri"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "DVD-ROM"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Georgian (\"Latin\" layout)"
+msgstr ""
+
+#: ../../share/advertising/09-mdksecure.pl:1
+#, c-format
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr ""
+
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Kenya"
+msgstr "Kenya"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``Unmount'' first"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Installing mtools packages..."
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "You must specify a root partition"
+msgstr ""
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "first step creation"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Both Shift keys simultaneously"
+msgstr "Shif"
+
+#: ../../standalone/drakhelp:1
+#, c-format
+msgid ""
+" --id <id_label>       - load the html help page which refers to id_label\n"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Create etherboot floppies/CDs:\n"
+"        \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
+"generate these images,\n"
+"        \t\tbased on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+"        \t\t\n"
+"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Select a scanner model"
+msgstr ""
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "Accept/Refuse bogus IPv4 error messages."
+msgstr "Terima ralat."
+
+#: ../../printer/data.pm:1
+#, fuzzy, c-format
+msgid "LPRng - LPR New Generation"
+msgstr "Baru"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Drakbackup Configuration"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Save as.."
+msgstr "Simpan."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Korea (North)"
+msgstr "Utara"
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid ""
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
+msgstr "dalam utama"
+
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System configuration"
+msgstr "Sistem"
+
+#: ../../any.pm:1 ../../security/l10n.pm:1
+#, c-format
+msgid "Autologin"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Domain Admin Password"
+msgstr "Domain"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, fuzzy, c-format
+msgid ""
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
+msgstr "pengguna KDE GNOME."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr ""
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
+msgstr "Kepada on Tetingkap"
+
+#: ../../common.pm:1
+#, c-format
+msgid "MB"
+msgstr ""
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "if set to yes, run some checks against the rpm database."
+msgstr "ya."
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Virgin Islands (British)"
+msgstr "Kepulauan Virgin (Inggeris)"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Bermuda"
+msgstr "Bermuda"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "click here if you are sure."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr "Tidak fail Lanjutan."
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"on on Nama Nama dan\n"
+" on\n"
+" on\n"
+" on\n"
+" on."
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#, fuzzy, c-format
+msgid "Remove"
+msgstr "Buang"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Lesotho"
+msgstr "Lesotho"
+
+#: ../../ugtk2.pm:1
+#, c-format
+msgid "utopia 25"
+msgstr ""
+
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Pipe job into a command"
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Cote d'Ivoire"
+msgstr "Pantai Gading"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr ""
+
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Yes"
+msgstr "Ya"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Which protocol do you want to use?"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore Progress"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Estonia"
+msgstr "Estonia"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Choose the host on which the local scanners should be made available:"
+msgstr "on lokal:"
+
+#: ../../partition_table.pm:1
+#, fuzzy, c-format
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr "dalam."
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Channel"
+msgstr "Saluran"
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Add"
+msgstr "Tambah"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Tidak Internet."
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " Error while sending mail. \n"
+msgstr "Ralat"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
+#, fuzzy, c-format
+msgid "Keyboard"
+msgstr "Papan Kekunci"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
+msgstr ""
+"\n"
+" dalam"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid ""
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
+msgstr ""
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Choose the connection you want to configure"
+msgstr ""
+
+#: ../../standalone/draksec:1
+#, c-format
+msgid "Please wait, setting security level..."
+msgstr ""
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "Configuring network device %s"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "activated"
+msgstr ""
+
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Finding packages to upgrade..."
+msgstr "Cari pakej untuk ditingkatupaya..."
+
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Mount point: "
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "parse all fonts"
+msgstr ""
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "Allow/Forbid direct root login."
+msgstr ""
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid " Accept/Refuse broadcasted icmp echo."
+msgstr "Terima."
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With X"
+msgstr ""
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Multi-head configuration"
+msgstr ""
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "No browser available! Please install one"
+msgstr "Tidak"
+
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
+"\n"
+"%s"
+msgstr ""
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr ""
+
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
+msgstr ""
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Domain name"
+msgstr "Domain"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Sharing of local printers"
+msgstr "lokal"
+
+#: ../../install_messages.pm:1
+#, c-format
+msgid "http://www.mandrakelinux.com/en/92errata.php3"
+msgstr ""
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "Enable/Disable libsafe if libsafe is found on the system."
+msgstr "on."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Available printers"
+msgstr ""
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Empty"
+msgstr ""
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The default lease (in seconds)"
+msgstr "default dalam saat"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid ""
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press \"%s\" to continue."
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+"        \t\tto help manage/customize these images. To create the file \n"
+"        \t\t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
+"include in \n"
+"        \t\tdhcpd.conf, you should create the etherboot images for at least "
+"one full kernel."
+msgstr ""
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Interface \"%s\""
+msgstr "Antaramuka"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "asas"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"There are %d unknown printers directly connected to your system"
+msgstr "tidak diketahui"
+
+#: ../../Xconfig/main.pm:1
+#, fuzzy, c-format
+msgid "Test"
+msgstr "Ujian"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Korea"
+msgstr ""
+
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Your choice? (default `%s'%s) "
+msgstr "default "
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Raw printer"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "official vendor name of the cpu"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Useless without Terminal Server"
+msgstr ""
+
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Vendor"
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Interface %s"
+msgstr "Antaramuka"
+
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure mouse"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the mount points"
+msgstr ""
+
+#: ../../help.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "OK"
+msgstr "OK"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Yugoslavian (latin)"
+msgstr ""
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installing"
+msgstr ""
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan with Wheel emulation"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Launch userdrake"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Is this an install or an upgrade?"
+msgstr ""
+
+#: ../../help.pm:1
+#, c-format
+msgid "ISDN card"
+msgstr ""
+
+#: ../../share/advertising/02-community.pl:1
+#, fuzzy, c-format
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr "Kepada dan on."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Hard drive.\n"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
+msgstr ""
+"on\n"
+" keluar fail on\n"
+" on dan pengguna Tingkatupaya on Tingkatupaya on."
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Printer on remote CUPS server"
+msgstr "on"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr "Gagal Pejabat."
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "here if no."
+msgstr "tidak."
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "DHCP"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The maximum lease (in seconds)"
+msgstr "dalam saat"
+
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#, fuzzy, c-format
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "bersiri."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Did it work properly?"
+msgstr ""
+
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Mount the file system read-only."
+msgstr "fail."
+
+#: ../../security/level.pm:1
+#, c-format
+msgid "Poor"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Report check result by mail"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Grenada"
+msgstr "Grenada"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The DHCP start range"
+msgstr "DHCP mula"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Unsafe"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ", %s sectors"
+msgstr ""
+
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "No"
+msgstr "Tidak"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Guadeloupe"
+msgstr "Guadeloupe"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Kannada"
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "could not find any font.\n"
+msgstr ""
+
+#: ../../standalone/keyboarddrake:1
+#, fuzzy, c-format
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Padam dalam?"
+
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Vertical refresh rate"
+msgstr ""
+
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#, c-format
+msgid "Entering step `%s'\n"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Niger"
+msgstr "Niger"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing %s ..."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "No printer"
+msgstr "Tidak"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "alert configuration"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NetWare Printer Options"
+msgstr ""
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "%s BootSplash (%s) preview"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "February"
+msgstr ""
+
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "General"
+msgstr "Umum"
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "/etc/issue* exist"
+msgstr ""
+
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Add a user"
+msgstr "Tambah"
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Network configuration (%d adapters)"
+msgstr "Rangkaian"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "April"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Deactivate now"
+msgstr ""
+
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#, c-format
+msgid "Mandatory package %s is missing"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Philippines"
+msgstr "Filipina"
+
+#: ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakperm:1
+#: ../../standalone/draksec:1 ../../standalone/mousedrake:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Ok"
+msgstr "Ok"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "drakTermServ Overview"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print Queue Name"
+msgstr "Giliran"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
+msgstr "lokal dan"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Move files to the new partition"
+msgstr "fail"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
+msgstr "Tambah lokal."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"Please plug in and turn on all printers connected to this machine so that it/"
+"they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"dalam dan on\n"
+" on Berikutnya dan on Batal."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Pitcairn"
+msgstr "Pitcairn"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From Catalog"
+msgstr "Daripada"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "IDE"
+msgstr ""
+
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "mounting partition %s in directory %s failed"
+msgstr "dalam direktori"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Lilo screen"
+msgstr ""
+
+#: ../../bootloader.pm:1 ../../help.pm:1
+#, c-format
+msgid "LILO with graphical menu"
+msgstr ""
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Estimating"
+msgstr ""
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "You can't unselect this package. It is already installed"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "on SMB Tetingkap"
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Go on anyway?"
+msgstr "Pergi ke on?"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "dan."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"                      DrakBackup Report \n"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Does not appear to be recordable media!"
+msgstr ""
+
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Specify options"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vanuatu"
+msgstr "Vanuatu"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "New user list:\n"
+msgstr "Baru pengguna"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Either the server name or the server's IP must be given!"
+msgstr "IP!"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
+"\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
+msgstr "A on normal on A dalam dan Ok."
+
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "fail"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "Set the password history length to prevent password reuse."
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Norfolk Island"
+msgstr "Kepulauan Norfolk"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Theme installation failed!"
+msgstr "Tema!"
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "Nothing to do"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Use for loopback"
+msgstr ""
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Mandrake Bug Report Tool"
+msgstr ""
+
+#: ../../standalone/printerdrake:1
+#, c-format
+msgid "Apply filter"
+msgstr ""
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "use pppoe"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Moving files to the new partition"
+msgstr "fail"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr ""
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, fuzzy, c-format
+msgid "Advanced"
+msgstr "Lanjutan"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Swedish"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Afghanistan"
+msgstr "Afghanistan"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "More Options"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr "Padam Pemacu fail."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Burundi"
+msgstr "Burundi"
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
+msgstr "pengguna asas dan."
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Add Client -->"
+msgstr "Tambah"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Read carefully!"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "RW"
+msgstr ""
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr "dalam dan"
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Port"
+msgstr "Liang"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "No (experts only)"
+msgstr "Tidak"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No kernel selected!"
+msgstr "Tidak!"
+
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr ""
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Set-GID"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "The encryption keys do not match"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"For a multisession CD, only the first session will erase the cdrw. Otherwise "
+"the cdrw is erased before each backup."
+msgstr ""
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "USB printer"
+msgstr "USB"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Right \"Windows\" key"
+msgstr "Kanan Tetingkap"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr "ya kosong dalam."
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr "dalam off."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Here is a list of the available printing options for the current printer:\n"
+"\n"
+msgstr ""
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr ""
+
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
+msgstr "dan."
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr "dan."
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "Buang"
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Network configuration"
+msgstr "Rangkaian"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "No sharing"
+msgstr "Tidak"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule down one level"
+msgstr ""
+
+#: ../../common.pm:1
+#, c-format
+msgid "TB"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "FATAL"
+msgstr ""
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Refresh the list"
+msgstr "Daftar user"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
+"\n"
+"The network address is %s using a netmask of %s.\n"
+"\n"
+msgstr "DHCP dalam"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Delete"
+msgstr "Padam"
+
+#: ../../Xconfig/various.pm:1
+#, fuzzy, c-format
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
+msgstr "mula mula?"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Build the disk"
+msgstr ""
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "Putus"
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Status:"
+msgstr "Status:"
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "HTTP proxy"
+msgstr "HTTP"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "SSH Server"
+msgstr "SSH"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "\t-Network by rsync.\n"
+msgstr "Rangkaian"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "European protocol"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ", printer \"%s\" on server \"%s\""
+msgstr "on"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Note that currently all 'net' media also use the hard drive."
+msgstr ""
+
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Error"
+msgstr "Ralat"
+
+#: ../../any.pm:1
+#, c-format
+msgid "allow \"su\""
+msgstr ""
+
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Australia"
+msgstr "Australia"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "please wait during ttmkfdir..."
+msgstr ""
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Configure only card \"%s\"%s"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Level"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Change the printing system"
+msgstr "Ubah"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure services"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Broadcast Address:"
+msgstr "Alamat:"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "mount failed: "
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid ""
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter.  Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Image"
+msgstr "Imej"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr "Gagal Pejabat."
+
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr ""
+
+#: ../../modules.pm:1
+#, fuzzy, c-format
+msgid ""
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+msgstr "tidak."
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Selected All"
+msgstr ""
+
+#: ../../printer/data.pm:1
+#, fuzzy, c-format
+msgid "CUPS - Common Unix Printing System"
+msgstr "Cetakan"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Webmin Service"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "device"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Enter the directory to save to:"
+msgstr "Enter direktori:"
+
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Greece"
+msgstr "Greek"
+
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "All"
+msgstr "Semua"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Which printing system (spooler) do you want to use?"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "July"
+msgstr ""
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Prints into %s"
+msgstr "Cetakan"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "An error occurred"
+msgstr "ralat"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Tamil (Typewriter-layout)"
+msgstr ""
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "Use password to authenticate users."
+msgstr ""
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr "on on dan."
+
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "manual"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Filename text to search for:"
+msgstr "Namafail:"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer manufacturer, model, driver"
+msgstr ""
+
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr "tidak."
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr "Direktori"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Printer on NetWare server"
+msgstr "on"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Give the ram size in MB"
+msgstr "dalam"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Friday"
+msgstr ""
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnection from Internet complete."
+msgstr "Internet."
+
+#: ../../any.pm:1
+#, c-format
+msgid "Real name"
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "done"
+msgstr "siap"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please uncheck or remove it on next time."
+msgstr "on."
+
+#: ../../security/level.pm:1
+#, c-format
+msgid "Higher"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr ""
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
+"Tidak on Video dalam\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Can't find %s on %s"
+msgstr "on"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Japanese 106 keys"
+msgstr "Jepun"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Could not install the packages needed to share your scanner(s)."
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "This will take a few minutes."
+msgstr "minit."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "June"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Use scanners on remote computers"
+msgstr "on"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Delete selected rule"
+msgstr "Padam"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Accessing printers on remote CUPS servers"
+msgstr "on"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Insert a floppy in %s"
+msgstr "dalam"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Maldives"
+msgstr "Maldives"
+
+#: ../../any.pm:1
+#, c-format
+msgid "compact"
+msgstr ""
+
+#: ../../common.pm:1
+#, c-format
+msgid "1 minute"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "type: fat"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "on channel %d id %d\n"
+msgstr "on"
+
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", multi-function device"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Laos"
+msgstr "Laos"
+
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid ""
+"Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr "dan Internet dan!"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "Activate/Disable ethernet cards promiscuity check."
+msgstr ""
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr "tidak"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Up"
+msgstr "Naik"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Firewall"
+msgstr ""
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Area:"
+msgstr ""
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "(E)IDE/ATA controllers"
+msgstr ""
+
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "All I/O to the file system should be done synchronously."
+msgstr "Semua fail siap."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer Server"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Custom configuration"
+msgstr "Tersendiri"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr "direktori"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Saint Pierre and Miquelon"
+msgstr "dan"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "September"
+msgstr ""
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "saving Bootsplash theme..."
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Portugal"
+msgstr "Portugal"
+
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Do you have another one?"
+msgstr ""
+
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", printing to %s"
+msgstr ""
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "DHCP"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Toggle to normal mode"
+msgstr "normal"
+
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#, fuzzy, c-format
+msgid "Generic"
+msgstr "Generik"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Cylinder %d to %d\n"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "New profile..."
+msgstr "Baru."
+
+#: ../../standalone/draksec:1
+#, c-format
+msgid "NONE"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Which disk do you want to move it to?"
+msgstr ""
+
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Display logo on Console"
+msgstr "Paparan on"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Windows Domain"
+msgstr "Tetingkap"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Saami (norwegian)"
+msgstr ""
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Interface %s (on network %s)"
+msgstr "Antaramuka on"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "INFO"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Wallis and Futuna"
+msgstr "dan"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Is FPU present"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "tidak on"
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"No additional information\n"
+"about this service, sorry."
+msgstr "Tidak."
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Build Single NIC -->"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Marshall Islands"
+msgstr "Kepulauan Marshall"
+
+#: ../../ugtk2.pm:1
+#, c-format
+msgid "Is this correct?"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Windows (FAT32)"
+msgstr "Tetingkap"
+
+#: ../../steps.pm:1
+#, c-format
+msgid "Root password"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Build All Kernels -->"
+msgstr "Semua"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "DVDRAM device"
+msgstr ""
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "if set to yes, report unowned files."
+msgstr "ya fail."
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"<span foreground=\"royalblue3\">Version:</span> %s\n"
+"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;tvignaud"
+"\\@mandrakesoft.com&gt;\n"
+"\n"
+msgstr ""
+"\n"
+"<span foreground=\"royalblue3\"> Versi</span>\n"
+"<span foreground=\"royalblue3\"></span>&lt;&gt;"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Version: "
+msgstr "Versi: "
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Server IP missing!"
+msgstr "Pelayan IP!"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Suriname"
+msgstr "Surinam"
+
+#: ../../network/adsl.pm:1
+#, fuzzy, c-format
+msgid "Use a floppy"
+msgstr "Simpan on"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Enable ACPI"
+msgstr ""
+
+#: ../../fs.pm:1
+#, c-format
+msgid "Give write access to ordinary users"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Environment"
+msgstr "Grafikal"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Gibraltar"
+msgstr "Gibraltar"
+
+#: ../../network/modem.pm:1
+#, c-format
+msgid "Do nothing"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete Client"
+msgstr "Padam"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Filesystem type: "
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Starting network..."
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vietnam"
+msgstr "Vietnam"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "/_Fields description"
+msgstr ""
+
+#: ../../share/advertising/10-security.pl:1
+#, c-format
+msgid "Optimize your security by using Mandrake Linux"
+msgstr ""
+
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/drakperm:1 ../../standalone/draksec:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Help"
+msgstr "Bantuan"
+
+#: ../../security/l10n.pm:1
+#, fuzzy, c-format
+msgid "Check if the network devices are in promiscuous mode"
+msgstr "dalam"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Your personal phone number"
+msgstr ""
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "Tetingkap"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+msgstr "Ujian"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username required"
+msgstr "Namapengguna"
+
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Device"
+msgstr "Peranti RAID"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr "on default dalam English English dalam dalam dan Masuk on on dan."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "SMB Tetingkap"
+
+#: ../../printer/main.pm:1
+#, c-format
+msgid "URI: %s"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Valid user list changed, rewriting config file."
+msgstr "pengguna fail."
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "mkinitrd optional arguments"
+msgstr ""
+
+#: ../../share/advertising/03-software.pl:1
+#, c-format
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
+
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Protocol for the rest of the world"
+msgstr "Protokol"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print test pages"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Activate now"
+msgstr ""
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "64 MB or more"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr "dan on keluar Masuk."
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Please select the device where your %s is attached"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Not formatted\n"
+msgstr ""
+
+#: ../../standalone/draksec:1
+#, c-format
+msgid "Periodic Checks"
+msgstr ""
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "PXE Server Configuration"
+msgstr "Pelayan"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup the system files before:"
+msgstr "fail:"
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr "Internet."
+
+#: ../../any.pm:1
+#, c-format
+msgid "First floppy drive"
+msgstr ""
+
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "/File/_Quit"
+msgstr "Fail"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose the new size"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Media class"
+msgstr ""
+
+#: ../../standalone/XFdrake:1
+#, fuzzy, c-format
+msgid "You need to log out and back in again for changes to take effect"
+msgstr "keluar dan dalam"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Faroe Islands"
+msgstr "Kepulauan Faroe"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Restart XFS"
+msgstr "Ulanghidup"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Add host/network"
+msgstr "Tambah"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Scannerdrake will not be started now."
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model name"
+msgstr "Model"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Albania"
+msgstr "Albania"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "British Indian Ocean Territory"
+msgstr "Kawasan Ocean India British"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Normal Mode"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No CD-R/DVD-R in drive!"
+msgstr "Tidak dalam!"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer connection type"
+msgstr ""
+
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No network adapter on your system!"
+msgstr "Tidak on!"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Network %s"
+msgstr "Rangkaian"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Malayalam"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Option %s out of range!"
+msgstr "keluar!"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connect %s"
+msgstr "Sambung"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Restarting CUPS..."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Cetakan Kad on"
+
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Duplicate mount point %s"
+msgstr ""
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "if set to yes, run chkrootkit checks."
+msgstr "ya."
+
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Connection Configuration"
+msgstr ""
+
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Unknown|Generic"
+msgstr "Entah"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr "Kepada Internet Internet A dan dan."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Myanmar"
+msgstr "Myanmar"
+
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1 ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1 ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Quit"
+msgstr "Keluar"
+
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Auto allocate"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Check bad blocks?"
+msgstr ""
+
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Other MultiMedia devices"
+msgstr "Lain-lain"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "burner"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " (Default is all users)"
+msgstr "Default"
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "No remote machines"
+msgstr "Tidak"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"dalam on dan on\n"
+" on Berikutnya dan on Batal."
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Authentication NIS"
+msgstr "Pengesahan"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr "tidak"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Internet"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "United Arab Emirates"
+msgstr "Emiriah Arab Bersatu"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Card IO_0"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Disable Local Config"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Thailand"
+msgstr "Thailand"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Card IO_1"
+msgstr ""
+
+#: ../../standalone/printerdrake:1
+#, c-format
+msgid "Search:"
+msgstr "Cari:"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Kazakhstan"
+msgstr "Kazakhstan"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Routers:"
+msgstr ""
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Write"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Display all available remote CUPS printers"
+msgstr "Paparan"
+
+#: ../../install_steps_newt.pm:1
+#, c-format
+msgid "Mandrake Linux Installation %s"
+msgstr ""
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Unknown driver"
+msgstr "Entah"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Thai keyboard"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Bouvet Island"
+msgstr "Bouvet Island"
+
+#: ../../network/modem.pm:1
+#, c-format
+msgid "Dialup options"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "If no port is given, 631 will be taken as default."
+msgstr "tidak default."
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"Change your Cd-Rom!\n"
+"\n"
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+msgstr "Ubah dalam dan Ok siap Batal."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Polish"
+msgstr ""
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Mandrake Online"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "\t-Network by webdav.\n"
+msgstr "Rangkaian"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", multi-function device on a parallel port"
+msgstr "on"
+
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
+msgstr "Tidak on."
+
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Netmask"
+msgstr "Netmask"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "No hard drives found"
+msgstr "Tidak"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "2 buttons"
+msgstr ""
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech CC Series"
+msgstr ""
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "What kind is your ISDN connection?"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Label"
+msgstr "Label"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Save on floppy"
+msgstr "Simpan on"
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Check open ports"
+msgstr ""
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected printer"
+msgstr "Edit"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer auto-detection"
+msgstr ""
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Which of the following is your ISDN card?"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr "fail IP fail."
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Msec"
+msgstr ""
+
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr "Notis"
+
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Number of capture buffers:"
+msgstr ""
+
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "default "
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
+"\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
+msgstr "fail on dan on on on on."
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "French"
+msgstr "Perancis"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Czech (QWERTY)"
+msgstr "Czech"
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Allow X Window connections"
+msgstr ""
+
+#: ../../standalone/service_harddrake:1
+#, fuzzy, c-format
+msgid "Hardware probing in progress"
+msgstr "Perkakasan dalam"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Net Device"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Summary"
+msgstr "Ringkasan"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+msgstr "USB USB."
+
+#: ../../network/adsl.pm:1 ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Next"
+msgstr "Berikutnya"
+
+#: ../../bootloader.pm:1
+#, fuzzy, c-format
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "on"
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "CHAP"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Puerto Rico"
+msgstr "Puerto Rico"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "(bootp/dhcp/zeroconf)"
+msgstr ""
+
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Welcome.\n"
+"\n"
+"The parameters of the auto-install are available in the sections on the left"
+msgstr "dalam on"
+
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid ""
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgstr "Ok Batal"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr ""
+
+#: ../../install_any.pm:1
+#, c-format
+msgid ""
+"The following packages will be removed to allow upgrading your system: %s\n"
+"\n"
+"\n"
+"Do you really want to remove these packages?\n"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Anguilla"
+msgstr "Anguilla"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "NIS Domain"
+msgstr "NIS"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Antarctica"
+msgstr "Antarctika"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr "Pengguna"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Mount options"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Jamaica"
+msgstr "Jamaica"
+
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
+msgstr ""
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Please wait, preparing installation..."
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Czech (QWERTZ)"
+msgstr "Czech"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "Track network card id (useful for laptops)"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The port number should be an integer!"
+msgstr ""
+
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "You must choose an image file first!"
+msgstr "fail!"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore from Hard Disk."
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Add to LVM"
+msgstr "Tambah"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "DNS server"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Trinidad and Tobago"
+msgstr "Trinidad dan Tobago"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "dan"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host name or IP."
+msgstr "Hos IP."
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "/_Edit"
+msgstr "Edit"
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "simple"
+msgstr ""
+
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Clear all"
+msgstr "Kosongkan"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "No test pages"
+msgstr "Tidak"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Falkland Islands (Malvinas)"
+msgstr "Kepulauan Falkland"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Adapter %s: %s"
+msgstr ""
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Boot disk creation"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Monday"
+msgstr ""
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Unknown model"
+msgstr "Entah"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr "ya fail."
+
+#: ../../help.pm:1
+#, c-format
+msgid "authentication"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup Now"
+msgstr ""
+
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "/_File"
+msgstr "/_Fail"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Pejabat"
+
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
+msgstr ""
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Editable"
+msgstr "dimatikan"
+
+#: ../../network/ethernet.pm:1
+#, fuzzy, c-format
+msgid "Which dhcp client do you want to use ? (default is dhcp-client)"
+msgstr "default"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Tamil (ISCII-layout)"
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Mayotte"
+msgstr "Mayotte"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "Set shell commands history size. A value of -1 means unlimited."
+msgstr "A."
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d KB\n"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Creating auto install floppy..."
+msgstr "Mencipta."
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for scanners ..."
+msgstr "Mencari."
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Russia"
+msgstr ""
+
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Partitioning"
+msgstr "Pempartisyenan"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "ethernet card(s) detected"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Syslog"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Can't create catalog!"
+msgstr ""
+
+#: ../../share/advertising/11-mnf.pl:1
+#, fuzzy, c-format
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr "Selesai dan dan."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "Not enough free space for auto-allocating"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Set root password"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, fuzzy, c-format
+msgid "Enable IP spoofing protection"
+msgstr "IP"
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr "tidak."
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Group :"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr "on"
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Internet connection configuration"
+msgstr "Internet"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "Add the name as an exception to the handling of password aging by msec."
+msgstr "Tambah."
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Scanning for TV channels"
+msgstr ""
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Kernel:"
+msgstr ""
+
+#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "/_About..."
+msgstr "Perihal."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Bengali"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Preference: "
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#, fuzzy, c-format
+msgid "Services: %d activated for %d registered"
+msgstr "Perkhidmatan"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Create a bootdisk"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Solomon Islands"
+msgstr "Kepulauan Solomon"
+
+#: ../../standalone/mousedrake:1
+#, c-format
+msgid "Please test your mouse:"
+msgstr ""
+
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "(module %s)"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Workgroup"
+msgstr "Kumpulankerja"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer host name or IP"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Path or Module"
+msgstr "Hos"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "Nama dan"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Show current interface configuration"
+msgstr ""
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Add Printer"
+msgstr "Tambah"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+"The argument specifies if clients are authorized to connect\n"
+"to the X server from the network on the tcp port 6000 or not."
+msgstr "on."
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Development"
+msgstr "Pembangunan"
+
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Done"
+msgstr "Selesai"
+
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Web Server"
+msgstr "Pelayan Web"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Chile"
+msgstr "Chile"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "\tDo not include System Files\n"
+msgstr "Sistem"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
+msgstr "lokal tidak on lokal on."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
+"\n"
+"Do not use \"scannerdrake\" for this device!"
+msgstr "dalam Fail on!"
+
+#: ../../any.pm:1
+#, c-format
+msgid "(already added %s)"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Bootloader installation in progress"
+msgstr "PemuatBoot dalam"
+
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", using command %s"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Alt and Shift keys simultaneously"
+msgstr "Alt dan Shif"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Add/Del Users"
+msgstr "Tambah"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Host/network IP address missing."
+msgstr "Hos IP."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "weekly"
+msgstr ""
+
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Settings"
+msgstr "Setting"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The entered host/network IP is not correct.\n"
+msgstr "IP"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Create/Transfer backup keys for SSH"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Here is the full list of available countries"
+msgstr "penuh"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Alternative test page (A4)"
+msgstr "A4"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
+msgstr "dalam Ok tiada Batal Ok."
+
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Wait please"
+msgstr ""
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "PAP"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup user files"
+msgstr "pengguna"
+
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "New"
+msgstr "Baru"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
+"\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
+"\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
+"\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
+"\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
+"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
+"\n"
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"dan pengguna dan on Masuk ralat dan on dan Tidak sekali on dalam Kepada "
+"ralat ralat LDAP NIS Tetingkap Domain tiada."
+
+#: ../../security/l10n.pm:1
+#, fuzzy, c-format
+msgid "Name resolution spoofing protection"
+msgstr "Nama"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
+"\n"
+"If you do not know what to choose, stay with the default option."
+msgstr "Internet off default."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Load from floppy"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The following printer was auto-detected. "
+msgstr ""
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Uses command %s"
+msgstr "%s pada %s"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Boot Floppy"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Norwegian"
+msgstr "Norwegian"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for new scanners ..."
+msgstr "Mencari."
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Apache World Wide Web Server"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "select path to restore (instead of /)"
+msgstr ""
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Configure bootsplash picture"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Georgia"
+msgstr "Georgia"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "China"
+msgstr "China"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "dan on"
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Reading data of installed printers..."
+msgstr "Membaca."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Erase Now "
+msgstr ""
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "server"
+msgstr ""
+
+#: ../../install_any.pm:1
+#, fuzzy, c-format
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "dalam"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr "ya"
+
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Please Wait... Applying the configuration"
+msgstr ""
+
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, fuzzy, c-format
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Selamat Datang!"
+
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Grub"
+msgstr ""
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "SCSI controllers"
+msgstr ""
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr "on"
+
+#: ../../standalone/drakedm:1
+#, c-format
+msgid "Choosing a display manager"
+msgstr ""
+
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Zeroconf Host name"
+msgstr "Hos"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Custom setup/crontab entry:"
+msgstr "Tersendiri:"
+
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP dalam"
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Configure CUPS printing system"
+msgstr "Ubah"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Ecuador"
+msgstr "Ecuador"
+
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Add an item"
+msgstr "Tambah"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The printers on this machine are available to other computers"
+msgstr "on"
+
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "I can't find needed image file `%s'."
+msgstr "fail."
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr "Tidak"
+
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
+msgstr "dan."
+
+#: ../../any.pm:1
+#, c-format
+msgid "Shell"
+msgstr "Shell"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Sao Tome and Principe"
+msgstr "Sao Tome and Principe"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "PCI"
+msgstr ""
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Can't login using username %s (bad password?)"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Azerbaidjani (latin)"
+msgstr ""
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package not installed"
+msgstr "Pakej"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "American Samoa"
+msgstr "Samoa Amerika"
+
+#: ../../share/advertising/12-mdkexpert.pl:1
+#, c-format
+msgid "Become a MandrakeExpert"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Protocol"
+msgstr "Protokol"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Copy fonts on your system"
+msgstr "Salin on"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Harddrake help"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Bogomips"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Pelayan"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"                    DrakBackup Report Details\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" Perincian"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore all backups"
+msgstr ""
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid " on parallel port #%s"
+msgstr "on"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr "dan dan."
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "if set to yes, check open ports."
+msgstr "ya port."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "This may take a moment to erase the media."
+msgstr ""
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "You can't select/unselect this package"
+msgstr ""
+
+#: ../../keyboard.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../harddrake/sound.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Warning"
+msgstr "Amaran"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"- Other Files:\n"
+msgstr "Lain-lain"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Remote host name"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to X programs"
+msgstr ""
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Computing the size of the Windows partition"
+msgstr "Tetingkap"
+
+#: ../../standalone/printerdrake:1
+#, c-format
+msgid "/_Refresh"
+msgstr ""
+
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Italy"
+msgstr "Itali"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Cayman Islands"
+msgstr "Kepulauan Cayman"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Name of printer"
+msgstr "Nama"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "disable"
+msgstr ""
+
+#: ../../fs.pm:1 ../../partition_table.pm:1
+#, fuzzy, c-format
+msgid "error unmounting %s: %s"
+msgstr "ralat"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do it!"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "%s not responding"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Select model manually"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Format"
+msgstr "Format"
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Various"
+msgstr ""
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Zip"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Left Alt key"
+msgstr "Kiri Alt"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Load setting"
+msgstr "Tersendiri"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
+
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Set selected printer as the default printer"
+msgstr "default?"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
+msgstr "dan."
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "PDQ"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Albanian"
+msgstr "Albania"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Lithuania"
+msgstr "Lithuania"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Detected model: %s %s"
+msgstr ""
+
+#: ../../share/advertising/03-software.pl:1
+#, c-format
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Local files"
+msgstr "Setempat"
+
+#: ../../pkgs.pm:1
+#, c-format
+msgid "maybe"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Panama"
+msgstr "Panama"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Can't open %s!"
+msgstr ""
+
+#: ../../Xconfig/various.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
+msgstr "dalam?"
+
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#, fuzzy, c-format
+msgid "Monitor"
+msgstr "Monitor"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Tetingkap dalam dalam Tetingkap pengguna on on dalam lokal Tetingkap on "
+"Tetingkap Tetingkap dalam"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "65 thousand colors (16 bits)"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr "Simpan on on"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove fonts on your system"
+msgstr "Buang on"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr "Amaran secara manual."
+
+#: ../../Xconfig/various.pm:1
+#, fuzzy, c-format
+msgid "Graphical interface at startup"
+msgstr "Grafikal"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid " adsl"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "format of floppies supported by the drive"
+msgstr ""
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "Firmware copy failed, file %s not found"
+msgstr ""
+
+#: ../../raid.pm:1
+#, fuzzy, c-format
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "RAD"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "local config: true"
+msgstr "lokal"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr "on default."
+
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Connected"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Macedonian"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Mali"
+msgstr "Mali"
+
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Bridges and system controllers"
+msgstr "dan"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "/File/_Save"
+msgstr "Fail"
+
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "No details"
+msgstr "Tidak"
+
+#: ../../pkgs.pm:1
+#, c-format
+msgid "very nice"
+msgstr ""
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Preview"
+msgstr ""
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Remote Control"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please select media for backup..."
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Wrong email"
+msgstr ""
+
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree86 server: %s\n"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Allow Thin Clients"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Russia"
+
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "/_Options"
+msgstr "Aksi"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Your printer model"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
+msgstr "AMARAN on."
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
+msgstr "Padam fail"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
+msgstr "Tidak dan fail."
+
+#: ../../share/advertising/04-configuration.pl:1
+#, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr ""
+
+#: ../../standalone/drakbackup:1 ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Save"
+msgstr "Simpan"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "The %s is unsupported"
+msgstr ""
+
+#: ../../services.pm:1
+#, c-format
+msgid "Load the drivers for your usb devices."
+msgstr ""
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Disk"
+msgstr ""
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Enter a printer device URI"
+msgstr "Enter"
+
+#: ../../share/advertising/01-thanks.pl:1
+#, fuzzy, c-format
+msgid ""
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
+msgstr "Bebas."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Israel"
+msgstr "Israel"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "French Guiana"
+msgstr "French Guiana"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "default:LTR"
+msgstr "default"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "A command line must be entered!"
+msgstr "A!"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select user manually"
+msgstr "pengguna"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer printer configuration"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "on"
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Check additions/removals of suid root files"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
+"C Tetingkap dan Domain Tetingkap dihidupkan dan Tetingkap Domain dan "
+"Namapengguna Katalaluan."
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "%s (Port %s)"
+msgstr "Liang"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use network connection to backup"
+msgstr ""
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Kernel version"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"on dan dan Pembangunan\n"
+" dalam\n"
+" on\n"
+" on\n"
+"\n"
+"\n"
+" asas dan\n"
+" jumlah jumlah dalam."
+
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "Accept user"
+msgstr "Terima"
+
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "Server"
+msgstr "Pelayan"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Left Shift key"
+msgstr "Kiri Shif"
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid " local network"
+msgstr "lokal"
+
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Bad choice, try again\n"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Syslog reports to console 12"
+msgstr ""
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Search new servers"
+msgstr "Cari"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Heard and McDonald Islands"
+msgstr "dan"
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "No alternative driver"
+msgstr "Tidak"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Toggle to expert mode"
+msgstr ""
+
+#: ../../printer/cups.pm:1
+#, fuzzy, c-format
+msgid "(on this machine)"
+msgstr "on"
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Gateway dalam"
+
+#: ../../network/modem.pm:1
+#, c-format
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Looking at packages already installed..."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Differential Backups"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Driver"
+msgstr "Jurupacu"
+
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "DVD-R device"
+msgstr ""
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer on remote lpd server"
+msgstr "on lpd"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
+msgstr "dan on normal Masuk Pelayan."
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"dan dan dan dalam dalam utama\n"
+" Mesej\n"
+" Peranti RAID\n"
+" Buka dalam saat dan\n"
+" dalam default\n"
+" C\n"
+"\n"
+" Default default Buka."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Wednesday"
+msgstr ""
+
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Germany"
+msgstr "Jerman"
+
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Austria"
+msgstr "Austria"
+
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "No mouse"
+msgstr "Tidak"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Choose your CD/DVD media size (MB)"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, fuzzy, c-format
+msgid "Check permissions of files in the users' home"
+msgstr "fail dalam"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
+
+#: ../../ugtk2.pm:1
+#, c-format
+msgid "Collapse Tree"
+msgstr ""
+
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Auto Install Configurator"
+msgstr "Install"
+
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure networking"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Where do you want to install the bootloader?"
+msgstr "Dimana anda ingin pemuatbut ini dipasang?"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
+msgstr ""
+"dan dalam dalam dan on on dan Sepanyol on English default dalam dan dalam "
+"Lanjutan tunggal on pengguna pengguna."
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "tape"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "DHCP client"
+msgstr "DHCP"
+
+#: ../../security/l10n.pm:1
+#, fuzzy, c-format
+msgid "List users on display managers (kdm and gdm)"
+msgstr "on dan"
+
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (bersiri, jenis C7 lama)"
+
+#: ../../partition_table.pm:1
+#, fuzzy, c-format
+msgid "Restoring from file %s failed: %s"
+msgstr "fail"
+
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid ""
+"I can't read the partition table of device %s, it's too corrupted for me :(\n"
+"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
+"The other solution is to not allow DrakX to modify the partition table.\n"
+"(the error is %s)\n"
+"\n"
+"Do you agree to lose all the partitions?\n"
+msgstr "on ralat"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "on"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "New devfs device"
+msgstr "Baru"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "ERROR: Cannot spawn %s."
+msgstr "RALAT."
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Boot Style Configuration"
+msgstr "Gaya:"
+
+#: ../../help.pm:1
+#, c-format
+msgid "Automatic time synchronization"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup files not found at %s."
+msgstr "fail."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (phonetic)"
+msgstr ""
+
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Card model:"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Thin Client"
+msgstr ""
+
+#: ../../share/advertising/01-thanks.pl:1
+#, c-format
+msgid "Thank you for choosing Mandrake Linux 9.2"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Start Server"
+msgstr "Mula"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Turkmenistan"
+msgstr "Turkmenistan"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "All remote machines"
+msgstr "Semua"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Install themes"
+msgstr "Install"
+
+#: ../../help.pm:1
+#, c-format
+msgid "Espanol"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Preparing installation"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Edit selected host/network"
+msgstr "Edit"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Add User -->"
+msgstr "Tambah Pengguna"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Nauru"
+msgstr "Nauru"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "True Type fonts installation"
+msgstr "Jenis"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "lokal"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "LAN configuration"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "hard disk model"
+msgstr ""
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Get Windows Fonts"
+msgstr "Tetingkap"
+
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "Mouse Systems"
+msgstr "Tetikus"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Iranian"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Croatia"
+msgstr "Croatia"
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Gateway:"
+msgstr "Gateway:"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Add server"
+msgstr "Tambah"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Remote printer name"
+msgstr ""
+
+#: ../../share/advertising/10-security.pl:1
+#, fuzzy, c-format
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together  in order to highly reduce hacking risks."
+msgstr "dan dalam."
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Device: "
+msgstr "Peranti RAID "
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#, c-format
+msgid "Printerdrake"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "License agreement"
+msgstr ""
+
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "System Options"
+msgstr "Sistem"
+
+#: ../../security/level.pm:1
+#, c-format
+msgid "Please choose the desired security level"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr "dalam"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", USB printer"
+msgstr "USB"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid ""
+"Unable to properly close mkbootdisk:\n"
+"\n"
+"<span foreground=\"Red\"><tt>%s</tt></span>"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Incremental backups only save files that have changed or are new since the "
+"last backup."
+msgstr "fail."
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Choose the applications that will support the fonts:"
+msgstr ""
+
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure X"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "hd"
+msgstr "Chad"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Turki"
+
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Congratulations!"
+msgstr "Tahniah!"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Use owner id for execution"
+msgstr ""
+
+#: ../../security/l10n.pm:1
+#, c-format
+msgid "Allow remote root login"
+msgstr ""
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Down"
+msgstr "Turun"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Raw printer (No driver)"
+msgstr "Tidak"
+
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Install rpm"
+msgstr "Install"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr "Kepada fail<file><file><file> dan"
+
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Time remaining "
+msgstr "Masa "
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "UK keyboard"
+msgstr ""
+
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Unmount"
+msgstr ""
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Uninstall Fonts"
+msgstr ""
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft Explorer"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "German (no dead keys)"
+msgstr "Jerman tidak"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\tSend mail to %s\n"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transferring %s..."
+msgstr ""
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "32 thousand colors (15 bits)"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr ""
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Reboot"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Gambia"
+msgstr "Gambia"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Mandrake Control Center"
+msgstr "Pusat Kawalan Mandrake"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Multi-function device"
+msgstr "on"
+
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr "port."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Tape \n"
+msgstr ""
+
+#: ../../standalone/drakhelp:1
+#, fuzzy, c-format
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr "Tidak on"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Remember this password"
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Internet dihidupkan."
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "\t-Network by SSH.\n"
+msgstr "Rangkaian SSH"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr "dan pengguna dan."
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid " cable"
+msgstr ""
+
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Use the free space on the Windows partition"
+msgstr "on Tetingkap"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "%s found on %s, configure it automatically?"
+msgstr "on?"
+
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree86 driver: %s\n"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr "dalam"
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the packages you want to install"
+msgstr ""
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Papua New Guinea"
+msgstr "Papua New Guinea"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Multi-function device on a parallel port"
+msgstr "on"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Serbian (cyrillic)"
+msgstr "Serbian"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Enter the directory where backups are stored"
+msgstr "Enter direktori"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Make kernel message quiet by default"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr "default?"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The DHCP end range"
+msgstr "DHCP"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Creating bootdisk..."
+msgstr "Mencipta."
+
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "Wait please, testing your connection..."
+msgstr ""
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Bringing down the network"
+msgstr ""
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Login ID"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
+msgstr "fail IP fail."
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "DHCP Client"
+msgstr "DHCP"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "dismiss"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Scanning on \"%s\""
+msgstr "Cetakan on"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "omit raid modules"
+msgstr ""
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr "lpd."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Irish"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Sunday"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Internet Connection Configuration"
+msgstr "Internet"
+
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "comma separated numbers"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
+msgstr "dalam on Maklumat"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "on"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr ""
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "I can't find any room for installing"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Default printer"
+msgstr "Default"
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr "Internet"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Modify RAID"
+msgstr ""
+
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid ""
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
+msgstr "on."
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Add user"
+msgstr "Tambah"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "RAID-disks %s\n"
+msgstr "RAD"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Liberia"
+msgstr "Liberia"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid ""
+"Could not install the packages needed to set up a scanner with Scannerdrake."
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
+
+#: ../../steps.pm:1
+#, c-format
+msgid "Choose your keyboard"
+msgstr ""
+
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Format partitions"
+msgstr "Format"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Automatic correction of CUPS configuration"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Running \"%s\" ..."
+msgstr ""
+
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "enable radio support"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+"        \t\tThrough clusternfs, each diskless client can have its own unique "
+"configuration files\n"
+"        \t\ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
+"        \t\tdrakTermServ will help create these files."
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing to hosts: "
+msgstr "hos "
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Loopback file name: %s"
+msgstr "fail"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Please choose the printer to which the print jobs should go."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do not transfer printers"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "default"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+"     DUPONT Sebastien (original version)\n"
+"     CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+"    -  pfm2afm:   \n"
+"\t by Ken Borgendale:\n"
+"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
+"    -  type1inst:\n"
+"\t by James Macnicol: \n"
+"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+"    -  ttf2pt1:   \n"
+"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
+"             Convert ttf font files to afm and pfb fonts\n"
+msgstr ""
+"\n"
+" C\n"
+"\n"
+"<dchaumette\\@mandrakesoft.com>\n"
+" dan\n"
+" Umum\n"
+" Bebas\n"
+"\n"
+" dalam\n"
+"\n"
+" A\n"
+" Umum\n"
+" Umum\n"
+" Bebas\n"
+"\n"
+"\n"
+" Tetingkap fail Font\n"
+" fail\n"
+"\n"
+" fail dan"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Hard Disk to backup"
+msgstr ""
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#, c-format
+msgid "Configure"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Scannerdrake"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid ""
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
+msgstr "Amaran Internet"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup Users"
+msgstr ""
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
+msgstr "IP."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Select Printer Spooler"
+msgstr ""
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Create new theme"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Mandrake Tools Explanation"
+msgstr ""
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "Tidak"
+
+#: ../../install_steps.pm:1
+#, fuzzy, c-format
+msgid ""
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
+msgstr "on"
+
+#: ../../share/advertising/06-development.pl:1
+#, c-format
+msgid "Mandrake Linux 9.2: the ultimate development platform"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Detected model: %s"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "\"%s\" is not a valid email!"
+msgstr ""
+
+#: ../../standalone/drakedm:1
+#, fuzzy, c-format
+msgid ""
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
+msgstr "Paparan Sistem dan on lokal."
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid "if set to yes, run the daily security checks."
+msgstr "ya."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Azerbaijan"
+msgstr "Azerbaijan"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Device name to use for backup"
+msgstr "Peranti RAID"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No tape in %s!"
+msgstr "Tidak dalam!"
+
+#: ../../standalone/drakhelp:1
+#, c-format
+msgid ""
+" --doc <link>          - link to another web page ( for WM welcome "
+"frontend)\n"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (US)"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgstr "on USB"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "How is the printer connected?"
+msgstr ""
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Security level"
+msgstr "Keselamatan"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "final resolution"
+msgstr ""
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
+#, fuzzy, c-format
+msgid "Services"
+msgstr "Perkhidmatan"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "4 MB"
+msgstr ""
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "Office Workstation"
+msgstr "Pejabat"
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid ""
+"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
+"gnumeric), pdf viewers, etc"
+msgstr "Pejabat"
+
+#: ../../share/compssUsers:999
+msgid "Game station"
+msgstr ""
+
+#: ../../share/compssUsers:999
+msgid "Amusement programs: arcade, boards, strategy, etc"
+msgstr ""
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "Multimedia station"
+msgstr "Multimedia"
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "Sound and video playing/editing programs"
+msgstr "Bunyi dan"
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "Internet station"
+msgstr "Internet"
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid ""
+"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
+"browse the Web"
+msgstr "dan dan dan"
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "Network Computer (client)"
+msgstr "Rangkaian"
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "Clients for different protocols including ssh"
+msgstr "protokol"
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "Configuration"
+msgstr "Konfigurasikan"
+
+#: ../../share/compssUsers:999
+msgid "Tools to ease the configuration of your computer"
+msgstr ""
+
+#: ../../share/compssUsers:999
+msgid "Scientific Workstation"
+msgstr ""
+
+#: ../../share/compssUsers:999
+msgid "Scientific applications such as gnuplot"
+msgstr ""
+
+#: ../../share/compssUsers:999
+msgid "Console Tools"
+msgstr ""
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "Editors, shells, file tools, terminals"
+msgstr "Penyunting fail"
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "KDE Workstation"
+msgstr "KDE"
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid ""
+"The K Desktop Environment, the basic graphical environment with a collection "
+"of accompanying tools"
+msgstr "Desktop Persekitaran asas"
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "Gnome Workstation"
+msgstr "Gnome"
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid ""
+"A graphical environment with user-friendly set of applications and desktop "
+"tools"
+msgstr "A pengguna dan"
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "Other Graphical Desktops"
+msgstr "Lain-lain Grafikal"
+
+#: ../../share/compssUsers:999
+msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
+msgstr ""
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "C and C++ development libraries, programs and include files"
+msgstr "C dan C dan"
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "Documentation"
+msgstr "Dokumentasi"
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "Books and Howto's on Linux and Free Software"
+msgstr "dan on dan Bebas"
+
+#: ../../share/compssUsers:999
+msgid "LSB"
+msgstr ""
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "Linux Standard Base. Third party applications support"
+msgstr "Asas"
+
+#: ../../share/compssUsers:999
+msgid "Web/FTP"
+msgstr ""
+
+#: ../../share/compssUsers:999
+msgid "Apache, Pro-ftpd"
+msgstr ""
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "Mail"
+msgstr "Mel"
+
+#: ../../share/compssUsers:999
+msgid "Postfix mail server"
+msgstr ""
+
+#: ../../share/compssUsers:999
+msgid "Database"
+msgstr ""
+
+#: ../../share/compssUsers:999
+msgid "PostgreSQL or MySQL database server"
+msgstr ""
+
+#: ../../share/compssUsers:999
+msgid "Firewall/Router"
+msgstr ""
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "Internet gateway"
+msgstr "Internet"
+
+#: ../../share/compssUsers:999
+msgid "DNS/NIS "
+msgstr ""
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "Domain Name and Network Information Server"
+msgstr "Domain Nama dan Rangkaian Maklumat"
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "Network Computer server"
+msgstr "Rangkaian"
+
+#: ../../share/compssUsers:999
+msgid "NFS server, SMB server, Proxy server, ssh server"
+msgstr ""
+
+#: ../../share/compssUsers:999
+#, fuzzy
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr "dan dan dan"
+
+#, fuzzy
+#~ msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+#~ msgstr "normal"
+
+#, fuzzy
+#~ msgid "Hostname configuration"
+#~ msgstr "Sistem"
+
+#, fuzzy
+#~ msgid "Hostname"
+#~ msgstr "Hos"
+
+#, fuzzy
+#~ msgid "Printing system: "
+#~ msgstr "Cetakan "
+
+#, fuzzy
+#~ msgid "Insert floppy and press %s"
+#~ msgstr "dalam"