updated pot file

1 files changed, 12996 insertions, 12918 deletions

diff --git a/perl-install/share/po/hr.po b/perl-install/share/po/hr.po
index b666ed7e5..7b0ddfeae 100644
--- a/perl-install/share/po/hr.po
+++ b/perl-install/share/po/hr.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
 "PO-Revision-Date: 2002-03-22 05:58CET\n"
 "Last-Translator: Vlatko Kosturjak <kost@iname.com>\n"
 "Language-Team: Croatian <lokalizacija@linux.hr>\n"
@@ -15,971 +15,1743 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 0.8\n"
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+msgid "Scanning partitions to find mount points"
+msgstr "Tražim particije kako bi pronašao mjesta montiranja"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
 msgstr ""
-"Dijeljenje po korisniku koristi grupu \"fileshare\". \n"
-"Možete koristiti userdrake za dodavanje korisnika u navedenu grupu."
 
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Cancel"
-msgstr "Odustani"
+msgid "\t\tErase=%s"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "network printer port"
+msgstr ", TCP/IP host \"%s\", port %s"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Please insert floppy disk:"
+msgstr "Molim, umetnite Boot disketu u pogon %s"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Launch userdrake"
-msgstr "Pokreni userdrake"
+msgid "PCMCIA"
+msgstr "PCMCIA"
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"The backup partition table has not the same size\n"
+"Still continue?"
 msgstr ""
-"Da li želite dozvoliti korisnicima da izvezu neke direktorije u "
-"njihivompolaznom direktoriju?\n"
-"Dozvoljavanjem navedenoga ćete dozvoliti korisnicima da jednostavno kliknuna "
-"\"Dijeljenje\"\n"
-" u konqueroru i nautilusu.\n"
-"\n"
-"\"Proizvoljno\" će omogućiti dozvoljavanje po korisniku.\n"
+"Backup particijske tablice nema istu veličinu\n"
+"Da ipak nastavim?"
 
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Nužni paket %s nedostaje"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Which username"
+msgstr "Korisničko ime"
 
 #: ../../any.pm:1
 #, c-format
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr "Možete izvesti koristeći NFS ili Sambu. Koji od njih želite"
+msgid "Which type of entry do you want to add?"
+msgstr "Kakvu vrstu zapisa želite dodati"
 
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Paket %s treba instalirati. Da li ga želite instalirati?"
+msgid "Restore partition table"
+msgstr "Vrati particijsku tabelu"
 
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../printer/cups.pm:1
 #, c-format
-msgid "Custom"
-msgstr "Prilagođeno"
+msgid "On CUPS server \"%s\""
+msgstr "Na CUPS poslužitelju \"%s\""
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Allow all users"
-msgstr "Dozvoli svim korisnicima"
+msgid "Post-install configuration"
+msgstr "Postava nakon instalacije"
 
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "No sharing"
-msgstr "Nema dijeljenja"
+msgid "Use ``%s'' instead"
+msgstr "Umjesto toga koristi ``%s''"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "More"
-msgstr "Više"
+msgid "Type"
+msgstr "Vrsta"
 
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Here is the full list of available countries"
-msgstr "Ovdje je cijeli popis raspoloživih tipkovnica"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
+msgstr ""
+"\n"
+"Također, pisači podešeni sa PPD datotekama od svog proizvođača ili sanative "
+"CUPS pokretačkim programima se ne mogu prebaciti."
 
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "Molim izaberite koju vrstu miša koristite."
+#: ../../lang.pm:1
+#, c-format
+msgid "Sri Lanka"
+msgstr "Sri Lanka"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid " / Region"
-msgstr "Reunion"
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "Kopiraj fontove na vaš sustav"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Country"
-msgstr "Zemlja:"
+#: ../../lang.pm:1
+#, c-format
+msgid "Central African Republic"
+msgstr "Centralna Afrička Republika"
 
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "All languages"
-msgstr "Odaberite jezik"
+#: ../../network/network.pm:1
+#, c-format
+msgid "Gateway device"
+msgstr "Gateway uređaj"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use Unicode by default"
+msgid "Net Method:"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Ethernetcard"
+msgstr "Ethernet kartica"
+
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "Možete izabrati druge jezike koji će biti dostupni nakon instalacije"
+msgid "Parameters"
+msgstr "Parametri"
 
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Auto-detect"
+msgstr "Koristi auto detekciju"
+
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Please choose a language to use."
-msgstr "Molim izaberite jezik koji želite koristiti."
+msgid "Interface:"
+msgstr "Međusklop:"
 
-#: ../../any.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Choose the window manager to run:"
-msgstr "Izaberite prozorski upravitelj koji želite pokrenuti:"
+msgid "Select installation class"
+msgstr "Odaberite razred instalacije"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Choose the default user:"
-msgstr "Izaberite uobičajenog korisnika:"
+msgid "on CDROM"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
 #, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "Da li želite koristiti aboot?"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"Čini se kako sustav nije spojen na internet.\n"
+"Probajte ponovno podesiti vašu vezu."
 
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "I can set up your computer to automatically log on one user."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
 msgstr ""
-"Mogu podesiti da se vaše računalo automatski prijavi kao jedan korisnik.\n"
-"Da li želite koristiti tu pogodnost?"
+"Povežite vaš pisač na Linux poslužitelj i dopustite da se vaša "
+"Windowsračunala povezuju na njega kao klijenti.\n"
+"\n"
+"Da li stvarno želite nastaviti namještati ovaj pisač kao što činite sada?"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Autologin"
-msgstr "Auto-prijava"
+msgid "Belarus"
+msgstr "Belarus"
 
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Icon"
-msgstr "Ikona"
+msgid "Error writing to file %s"
+msgstr "Greška prilikom pisanja u datoteku %s"
 
-#: ../../any.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Shell"
-msgstr "Ljuska"
+msgid ""
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
+msgstr ""
+"apmd služi za monitoriranje statusa i baterije i njegovo logiranje putem "
+"syslog-a.\n"
+"Također može biti korišten za gašenje računala kada je baterija slaba."
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Password (again)"
-msgstr "Lozinka (provjera)"
+msgid "Use tape to backup"
+msgstr "Koristi vrpcu za pohranu"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Password"
-msgstr "Lozinka"
+msgid "The following packages are going to be installed"
+msgstr "Slijedeći paketi će biti instalirani"
 
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "User name"
-msgstr "Korisničko ime"
+msgid "CUPS configuration"
+msgstr "CUPS postavke"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Real name"
-msgstr "Puno ime"
+msgid "Hong Kong"
+msgstr "Hong Kong"
 
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Accept user"
-msgstr "Prihvati korisnika"
+msgid "Not enough free space to allocate new partitions"
+msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija"
 
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Done"
-msgstr "Gotov"
+msgid "Moving"
+msgstr "Premještam"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Enter a user\n"
-"%s"
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
 msgstr ""
-"Unesite korisnika\n"
-"%s"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Add user"
-msgstr "Dodaj korisnika"
+msgid "("
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "This user name has already been added"
-msgstr "Ovaj korisnik već postoji"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Dobro Došli u Čarobnjak za podešavanje mreže\n"
+"\n"
+"Sada ćemo konfigurirati vašu internet/mrežnu vezu.\n"
+"Ukoliko ne želite koristiti auto detekciju, odselektirajte kvadratić s "
+"potvrdom.\n"
 
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "The user name is too long"
-msgstr "Ovaj korisnik već postoji"
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#, c-format
+msgid ")"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Korisničko ime može sadržavati samo mala slova, brojeve, `-' i `_'"
+msgid "Lebanon"
+msgstr "Lebanon"
 
-#: ../../any.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Please give a user name"
-msgstr "Molim dajte korisniku korisničko ime"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
 
-#: ../../any.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "This password is too simple"
-msgstr "Lozinka je prejednostavna"
+msgid "Stop"
+msgstr "Zaustavljanje"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "detektirano %s"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No CD device defined!"
+msgstr "Odaberite datoteku"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Please try again"
-msgstr "Molim pokušajte ponovo"
+msgid "Bulgarian (phonetic)"
+msgstr "Bugarska (fonetska)"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "The passwords do not match"
-msgstr "Lozinke se ne podudaraju"
+msgid "The DHCP start ip"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "(already added %s)"
-msgstr "(već postoji %s)"
+msgid "256 kB"
+msgstr "256 kB"
 
 #: ../../any.pm:1
+#, c-format
+msgid "Bootloader main options"
+msgstr "Glavne postavke bootloadera"
+
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
+msgstr ""
+
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "access to compilation tools"
-msgstr "pristup rpm alatima"
+msgid "Tape"
+msgstr "Vrsta"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "access to network tools"
-msgstr "pristup rpm alatima"
+msgid "Scanning network..."
+msgstr "Pokrećem mrežu ..."
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "access to administrative files"
-msgstr "pristup administracijskim datotekama"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
+"S ovom opcijom moći ćete povratiti bilo koju inačicu\n"
+"vašeg /etc direktorija."
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "allow \"su\""
-msgstr "dozvoli \"su\""
+msgid "Malaysia"
+msgstr "Malazija"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "access to rpm tools"
-msgstr "pristup rpm alatima"
+msgid "Swiss (French layout)"
+msgstr "Švicarska (francuski raspored)"
 
-#: ../../any.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid "access to X programs"
-msgstr "pristup X programima"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid nije uspio (možda niste instalirali raidtools alate?)"
 
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+msgid "Webcam"
 msgstr ""
-"Ovo su trenutni zapisi.\n"
-"Možete dodati još koji ili urediti postojeći."
 
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Other OS (windows...)"
-msgstr "Drugi OS (Windows...)"
+msgid "size of the (second level) cpu cache"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Soundcard"
+msgstr "Zvučna kartica"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Drugi OS (MacOS...)"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"Da bi ipisali datoteku iz komandne linije (terminalski prozor) "
+"koristitekomandu \"%s <datoteka>\".\n"
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Drugi OS (SunOS...)"
+msgid "Level %s\n"
+msgstr "Razina %s\n"
 
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "Luxembourg"
+msgstr "Luksemburg"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Kakvu vrstu zapisa želite dodati"
+msgid ""
+"\n"
+"                      DrakBackup Daemon Report\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+"                      DrakBackup Daemon Report\n"
+"\n"
+"\n"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Iran"
+msgstr "Irak"
+
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "This label is already used"
-msgstr "Ova oznaka već postoji"
+msgid "Bus"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "You must specify a root partition"
-msgstr "Morate odrediti root particiju"
+msgid "Iraq"
+msgstr "Irak"
 
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "You must specify a kernel image"
-msgstr "Morate odrediti sliku kernela"
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr ""
+"Potencijalni LAN adresni konflikt je pronađen u trenutnoj konfiguraciji %s!\n"
 
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Empty label not allowed"
-msgstr "Prazna oznaka nije dozvoljena"
+msgid "Configuring..."
+msgstr "Podešavam..."
 
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Default"
-msgstr "Uobičajeno"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Postavljanje je već urađeno, ali je trenutno omogućeno."
 
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "NoVideo"
-msgstr "NemaVidea"
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Initrd-size"
-msgstr "Initrd-veličina"
+msgid "Password (again)"
+msgstr "Lozinka (provjera)"
 
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Append"
-msgstr "Dodaj na kraj"
+msgid "Search installed fonts"
+msgstr "Traži instalirane fontove"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Label"
-msgstr "Oznaka"
+msgid "Venezuela"
+msgstr "Venezuela"
 
-#: ../../any.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Unsafe"
-msgstr "Nesigurno"
+msgid "IP address"
+msgstr "IP adresa"
 
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Table"
-msgstr "Tablica"
+msgid "Choose the sizes"
+msgstr "Odaberite veličinu"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Root"
-msgstr "Root"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Popis oštećenih podataka:\n"
+"\n"
 
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "Read-write"
-msgstr "Čitaj-piši"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Choose another partition"
+msgstr "Izaberite drugu particiju"
 
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Current user"
+msgstr "Prihvati korisnika"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username"
+msgstr "Korisničko ime"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Video mode"
-msgstr "Video mod"
+msgid "Left \"Windows\" key"
+msgstr "Lijeva \"Windows\" tipka"
 
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "dhcpd Server Configuration"
+msgstr "Napredne postavke"
+
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Image"
-msgstr "Slika (image)"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Default OS?"
-msgstr "Uobičajeni OS?"
+msgid "Guyana"
+msgstr "Guyana"
 
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr "na Novell poslužitelju \"%s\", pisač \"%s\""
+
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Enable OF Boot?"
-msgstr "Omogući podizanje?"
+msgid "Remove a module"
+msgstr "Ukloni modul"
 
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Enable CD Boot?"
-msgstr "Omogući CD podizanje?"
+msgid "Password"
+msgstr "Lozinka"
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Vrijeme čekanja podizanja kernela"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Open Firmware Delay"
-msgstr "Pauza Otvorenog Firmware-a"
+msgid "Advanced Configuration"
+msgstr "Napredne postavke"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning on your HP multi-function device"
+msgstr ", multi-funkcionalan uređaj"
 
 #: ../../any.pm:1
 #, c-format
-msgid "Boot device"
-msgstr "Boot uređaj"
+msgid "Root"
+msgstr "Root"
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Init Message"
-msgstr "Init poruka"
+msgid "Choose an existing RAID to add to"
+msgstr "Izaberite postojeći RAID na koji želite dodati "
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Bootloader to use"
-msgstr "Koristiti Bootloader"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Turska (moderna  \"Q\" model)"
 
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Bootloader main options"
-msgstr "Glavne postavke bootloadera"
+msgid "Lilo message not found"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
 msgstr ""
-"Postavka ``Ograničene opcije na komandnoj liniji'' nema svrhe ako ne unesete "
-"lozinku"
+"Automatsko regeneriranje kernel header-a u /boot za\n"
+"/usr/include/linux/{autoconf,version}.h"
 
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Give the ram size in MB"
-msgstr "Upišite veličinu RAM u Mb"
+msgid "if needed"
+msgstr "ako je potrebno"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Failed..."
+msgstr "Povrati ostalo"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _jazz drives"
+msgstr "Koristi auto detekciju"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Description:\n"
+"\n"
+"  Drakbackup is used to backup your system.\n"
+"  During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ...  and Other (like Windows Partitions)\n"
+"\n"
+"  Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+"  Drakbackup allows you to restore your system to\n"
+"  a user selected directory.\n"
+"\n"
+"  Per default all backups will be stored on your\n"
+"  /var/lib/drakbackup directory\n"
+"\n"
+"  Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+"  \n"
+"  During the restore step, DrakBackup will remove \n"
+"  your original directory and verify that all \n"
+"  backup files are not corrupted. It is recommended \n"
+"  you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
+"Opis:\n"
+"\n"
+"  Drakbackup se koristi za sigurnosnu pohranu vašeg sustava.\n"
+"  Tijekom podešavanja možete izabrati: \n"
+"\t- Sustavske datoteke, \n"
+"\t- Korisničke datoteke, \n"
+"\t- Ostale datoteke.\n"
+"\tčitav vaš sustav ... i ostale (poput Windows particija)\n"
+"\n"
+"  Drakbackup vam omogućuje da pohranite vaš sustav na:\n"
+"\t- Tvrdi disk.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (s automatskim pokretanjem prilikom podizanja "
+"računala,\n"
+"spasonosnom opcijom i automatskom instalacijom.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Vrpcu.\n"
+"\n"
+"  Drakbackup vam omogućuje da povratite vaš sustav u\n"
+"  izabranu mapu.\n"
+"\n"
+"  Podrazumijevano, sve pohrane će biti u\n"
+"  /var/lib/drakbackup mapi\n"
+"\n"
+"  Datoteka s postavkama:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"\n"
+"Povrat:\n"
+"  \n"
+"  Tijekom povrata, DrakBackup će ukloniti \n"
+"  vašu izvornu mapu i potvrditi da li su sve\n"
+"  datoteke u pohrani ispravne. Preporučamo \n"
+"  da napravite posljednju pohranu prije povrata.\n"
+"\n"
+"\n"
+
+#: ../../install_messages.pm:1
 #, c-format
-msgid "Enable multiple profiles"
-msgstr "Omogući više obrazaca"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and  \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License,  you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of  the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of  "
+"downloading software components \n"
+"from one of Mandrake Linux sites  which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities.  Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A.  \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A.  \n"
+msgstr ""
+"Uvod\n"
+"\n"
+"Operativni sustav i njegove različite komponente raspoložive u Mandrake "
+"Linux distribuciji \n"
+"će se zvati \"Software-ski Produkti\" daljnje u tekstu. Software-ski "
+"Produkti  uključuju, ali nisu \n"
+"ograničeni na, skup programa, metoda, zakona i dokumentacija vezanih uz "
+"operativni\n"
+"sustav i različite komponente Mandrake Linux distribucije.\n"
+"\n"
+"\n"
+"1. Licencni Dogovor\n"
+"\n"
+"Molimo pažljivo pročitajte ovaj dokument. Ovaj dokument je licenci dogovor "
+"između vas i \n"
+"MandrakeSoft S.A. koji se primjenjuje na Software-ske produkte.\n"
+"Instaliranjem, dupliciranjem ili korištenjem Software-skih Produkata u bilo "
+"kojem obliku,eksplicitno \n"
+"prihvaćate i potpuno se slažete da ćete prihvatiti stavke i uvjete ove "
+"Licence. \n"
+"Ukoliko se ne slažete sa bilo kojim dijelom licence, nije vam dozvoljeno "
+"instalirati, duplicirati ili koristiti \n"
+"Software-ski produkt. \n"
+"Svaki pokušaj instalacije, dupliciranja ili korištenja Software-skog "
+"Produkta u obliku kojem ne priliči \n"
+"sa stavkama i uvjetima ove licence je prazno i uništiti će vaša prava pod "
+"ovom\n"
+"Licencom. Uslijed uništenja licence, morate odmah unišititi sve kopije \n"
+"Software-skog Produkta.\n"
+"\n"
+"\n"
+"2. Ograničeno Jamstvo\n"
+"\n"
+"Software-ski Produkt i pripadajuća dokumentacija je pružena \"kako je\", bez "
+"jamstva, do \n"
+"mjere dozvoljene zakonom.\n"
+"MandrakeSoft S.A. neće, u bilo kojim slučajevima i do te mjere dozvoljene "
+"zakonom, biti odgovaran za bilo kakvu specijalnu,\n"
+"nesretnu, direktnu ili indirektnu štetu bilo kakvu (uključujući granice "
+"štete od gubitka\n"
+"posla, prestanka posla, financijskih gubitaka, legalnih plaćanja i kazni "
+"posljedica sudskih \n"
+"presuda, ili bilo kakvih drugih posljedica gubitka) što je posljedica "
+"korištenja ili nemogućnosti korištenja Software-skog \n"
+"Produkta, iako je MandrakeSoft S.A. bio upozoren od mogućnosti takve \n"
+"štete.\n"
+"\n"
+"OGRANIČENA ODGOVORNOST POVEZANA SA POSJEDOVANJEM ILI KORIŠTENJEM ZABRANJENOG "
+"SOFTWARE-A U NEKIM ZEMLJAMA\n"
+"\n"
+"Do granice dozvoljene zakonom, MandrakeSoft S.A. ili njegovi distributori "
+"neće, u bilo kakvim slučajevima, biti \n"
+"odgovaran za bilo kakvu specijalnu, nesretnu, direktnu ili indirektnu štetu "
+"bilo kako (uključujući \n"
+"ograničene štete zbog gubitka posla, prekida posla, financijskog gubitka, "
+"legalnih plaćanja \n"
+"i kazni posljedica sudskih presuda, ili bilo kakvih drugih "
+"posljedicagubitka) što je posljedica \n"
+"posjedovanja ili korištenja software-skih komponenti ili kao posljedica "
+"skidanja (download-a) software-skih komponenti \n"
+"sa jednog od Mandrake Linux site-ova koja su zabranjena ili ograničena u "
+"nekim zemljama po lokalnim zakonima.\n"
+"Ova ograničena odgovornost se primjenjuje na, ali nije ograničena, jake "
+"kriptografske komponente \n"
+"uključene u Software-ski Produkt.\n"
+"\n"
+"\n"
+"3. GPL Licenca i slične licence\n"
+"\n"
+"Software-ski Prodkt se sastoji od komponenti napravljenih od raznih ljudi "
+"ili entiteta.  Veliki \n"
+"broj tih komponenti je pokriveno pod stavkama i uvjetima GNU Opće Javne \n"
+"Licence, u daljnjem tekstu zvana \"GPL\", ili  sličnih licenci. Veliki broj "
+"tih licenci dozvoljava vam korištenje, \n"
+"dupliciranje, prilagođavanje ili redistribuciju komponenti koju ona pokriva. "
+"Molimo pročitajte pažljivo stavke \n"
+"i uvjete licencnog dogovora svake komponente prije korištenja bilo koje "
+"komponente. Bilo koje pitanje \n"
+"o licenci komponente trebao bi biti adresiran autoru komponente a ne "
+"MandrakeSoft-u.\n"
+"Programe razvijeni od strane MandrakeSoft S.A. su pokriveni GPL licencom. "
+"Dokumentacija napisana \n"
+"od strane MandrakeSoft S.A. je pokrivena specifičnom licencom. Molimo "
+"pogledajte dokumentaciju za \n"
+"više detalja.\n"
+"\n"
+"\n"
+"4. Prava na intelektualno vlasništvo\n"
+"\n"
+"Sva prava komponenti Software-skog Produkta pripada njihovim uvaženim "
+"autorima i \n"
+"zaštićeni su intelektualnim vlasništvom i autorskim zakonima primjenjivim na "
+"software-ske programe.\n"
+"MandrakeSoft S.A. zadržava svoje pravo za izmjenu ili prilagođavanje "
+"Software-skog Produkta, kao cijelinu ili u\n"
+"dijelovima, u svim slučajevima za sve namjene.\n"
+"\"Mandrake\", \"Mandrake Linux\" i pripadajući logoi su zaštićeni prodajni "
+"znaci MandrakeSoft S.A.  \n"
+"\n"
+"\n"
+"5. Državni zakoni \n"
+"\n"
+"Ukoliko neki dio ovog dogovora govori ništa, ilegalan ili neprikladan "
+"sudstvu, taj \n"
+"dio može se isključiti iz ovog ugovora. Ali ostajete obveznu drugim "
+"primjenjivim sekcijama\n"
+"ugovora.\n"
+"Za stavke i uvjete ove Licence je nadležan zakon Francuske.\n"
+"Sve sporove oko stavaka licence će preferirano biti uređeno sudom. Kao "
+"zadnji \n"
+"izlaz, spor će biti predan odgovarajućem Sudu u Parizu - Francuska.\n"
+"Za bilo kakva pitanja o ovom dokumentu, molimo kontaktirajte MandrakeSoft S."
+"A.  \n"
 
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precizna veličina RAMa (pronađeno %d MB)"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "Pokaži trenutne postavke sučelja"
+
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Očisti /tmp na svakom podizanju"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon"
 
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Create a bootdisk"
-msgstr "Napravi boot disketu"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Ukoliko imate ISA karticu, vrijednosti na slijedećem zaslonu trebale bi biti "
+"dobre.\n"
+"\n"
+"Ukoliko imate PCMCIA karticu, morate znati irq i io vaše kartice.\n"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "restrict"
-msgstr "ograniči"
+msgid "Do not print any test page"
+msgstr "Ne ispiši nikakve probne stranice"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Restrict command line options"
-msgstr "Ograničene opcije na komandnoj liniji"
+msgid "Gurmukhi"
+msgstr ""
 
 #: ../../any.pm:1
 #, c-format
 msgid "Force No APIC"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+"Ova lozinka je prejednostavna (lozinka mora sadržavati barem %d znakova)"
+
+#: ../../standalone.pm:1
 #, fuzzy, c-format
-msgid "Enable ACPI"
-msgstr "Omogući CD podizanje?"
+msgid "[keyboard]"
+msgstr "Tipkovnica"
 
-#: ../../any.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Delay before booting default image"
-msgstr "Odgoda prije bootiranja uobičajenog imagea"
+msgid "FTP proxy"
+msgstr "FTP proxy"
 
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "compact"
-msgstr "zbijeno"
+msgid "Install List"
+msgstr "Instalacijski popis"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr "Povrati ostalo"
+
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Compact"
-msgstr "Zbijeno"
+msgid "Show only for the selected day"
+msgstr "Pokaži samo izabrani dan"
 
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Bootloader installation"
-msgstr "Bootloader instalacija"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t   \n"
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+"        \t\tto help manage/customize these images.\n"
+"\n"
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+"        \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+"        \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+"        \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+"        \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address              192.168.192.3;\n"
+"\t\t\t\t\t#type                          fat;\n"
+"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+"        - Maintain /etc/exports:\n"
+"        \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+"        \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+"        \t\tdiskless clients.\n"
+"\n"
+"        \t\tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t\t/                  (ro,all_squash)\n"
+"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+"        \t\t\n"
+"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+"        \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+"        \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+"        \t\tfiles.\n"
+"\n"
+"        - Per client system configuration files:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+"        \t\tbasis.\n"
+"\n"
+"        - /etc/xinetd.d/tftp:\n"
+"        \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+"        \t\tdiskless client.\n"
+"\n"
+"        \t\tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \t\tservice tftp\n"
+"        \t\t(\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t\t}\n"
+"        \t\t\n"
+"        \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+"        \t\tputs it's images.\n"
+"\n"
+"        - Create etherboot floppies/CDs:\n"
+"        \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
+"generate these images,\n"
+"        \t\tbased on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+"        \t\t\n"
+"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "First sector of boot partition"
-msgstr "Prvi sektor boot particije"
+msgid "512 kB"
+msgstr "512 kB"
 
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Prvi sektor pogona (MBR)"
+msgid "Logs"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Gdje želite instalirati bootloader?"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalacija"
+msgid "<control>N"
+msgstr "<control>N"
 
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "SILO Installation"
-msgstr "SILO instalacija"
+msgid "What kind of card do you have?"
+msgstr "Kakvu karticu posjedujete?"
 
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Skip"
-msgstr "Preskoči"
+msgid "<control>O"
+msgstr "<control>O"
 
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "On Floppy"
-msgstr "Spremi na disketu"
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Security"
+msgstr "Sigurnost"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
+"Možete također koristiti grafičko sučelje \"xpdq\" za namještanje opcijai "
+"upravljanje poslovima ispisa.\n"
+"Ako koristite KDE okružje, imate \"dugme za paniku\", ikonu na radnom stolu,"
+"nazvanu \"ZAUSTAVI pisač!\", koja zaustavlja sve poslove ispisa čim "
+"jestisnete. Ovo je korisno kad se, npr., zaglavi papir.\n"
+
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "<control>Q"
+msgstr "<control>Q"
+
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "Prvi sektor boot particije"
+msgid "Unknown"
+msgstr "Nepoznati model"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+msgid "This server is already in the list, it cannot be added again.\n"
 msgstr ""
-"Odlučili ste instalirati bootloader na particiju.\n"
-"To podrazumijeva da već imate bootloader na tvrdom disku sa kojeg podižete\n"
-"sustav (npr. System Commander).\n"
-"\n"
-"Sa kojeg diska želite podizati?"
 
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Creating bootdisk..."
-msgstr "Stvaram boot disketu"
+msgid "Network Configuration"
+msgstr "Mrežne postavke"
 
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Insert a floppy in %s"
-msgstr "Umetnite disketu u pogon %s"
+msgid "<control>S"
+msgstr "<control>S"
 
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Izaberite disketni pogon koji želite koristiti za izradu boot diskete"
+msgid ""
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
+msgstr ""
+"Protokol za ostatak svijeta \n"
+" bez D-kanala (za iznajmljene linije)"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Second floppy drive"
-msgstr "Drugi disketni pogon"
+msgid "Option %s must be a number!"
+msgstr "Opcija %s mora biti broj!"
 
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Notice"
+msgstr "NemaVidea"
+
+#: ../../security/help.pm:1
 #, c-format
-msgid "First floppy drive"
-msgstr "Prvi disketni pogon"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Žalim, međutim disketni pogon nije dostupan"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
 msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
 msgstr ""
-"Proizvoljna boot disketa omogućava način podizanja vašeg Linux sustava bez\n"
-"ovisnosti o normalnom bootloader-u. Ovo je korisno ukoliko ne želite "
-"instalirati\n"
-"LILO (ili grub) na vaš sustav, ili je drugi operativni sustav uklonio LILO, "
-"ili LILO ne\n"
-"želi raditi sa vašom konfiguracijom hardware-a. Proizvoljna boot disketa "
-"također može biti korištena sa\n"
-"Mandrake spasonosnom slikom, omogućavajući tako lakše spašavanje od raznih\n"
-" sustavskih grešaka.\n"
-"Da li želite napraviti proizvoljnu boot disketu za vaš sustav?\n"
-"%s"
+"Ovaj pisač je prepoznat. Namještanje pisača će raditi potpuno automatski.Ako "
+"vaš pisač nije ispravno prepoznat ili ako biste radije ručno "
+"namještalipisač, uključite \"Ručno namještanje\"."
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
+msgid "What type of partitioning?"
+msgstr "Kakav tip particioniranja?"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
 msgid ""
+"file list sent by FTP: %s\n"
+" "
+msgstr ""
+"popis datoteka poslan FTPom: %s\n"
+" "
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "Međusklop"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Options Description:\n"
+"\n"
+" - Backup System Files:\n"
+"       \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
 "\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane.  To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup.    \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
 "\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
 msgstr ""
+"opis opcija:\n"
+"\n"
+" - Pohrani sustavske datoteke:\n"
+"        \n"
+"\tOva opcija vam omogućuje da pohranite svoju /etc mapu,\n"
+"\tkoja sadrži sve datoteke s postavkama. Budite\n"
+"\toprezni tijekom postupka povrata da ne bi prepisali:\n"
+"\t\t/etc/passed \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Pohrani korisničke datoteke: \n"
+"\n"
+"\tOva opcija vam omogućuje da izaberete sve korisnike koje\n"
+"\tželite pohraniti.\n"
+"\tDa bi uštedjeli prostor na disku, preporučamo da\n"
+"\tizostavite cache web preglednika.\n"
+"\n"
+" - Pohrani ostale datoteke: \n"
+"\n"
+"\tOva opcija vam omogućuje da dodate još podataka za pohranu.\n"
+"\tSa ovom pohranom nije trenutačno moguće izabrati\n"
+"\tinkrementalnu pohranu.\t\t\n"
+" \n"
+" - Inkrementalne pohrane:\n"
+"\n"
+"\tInkrementalna pohrana je najmoćnija opcija kod\n"
+"\tpohranjivanja. Omogućuje vam da pohranite\n"
+"\tsve svoje podatke prvi put, a potom samo one\n"
+"\tpromijenjene.\n"
+"\tZatim ćete moći, prilikom povrata,\n"
+"\tvratiti vaše podatke prema određenom\n"
+"\tnadnevku.\n"
+"\tAko niste izabrali ovu opciju sve\n"
+"\tstare pohrane će biti prebrisane prije svake pohrane.\n"
 "\n"
 "\n"
-"(UPOZORENJE! Koristite XFS za vašu root particiju,\n"
-"stvaranje boot diskete na disketi kapaciteta 1.44 Mb vjerojatno\n"
-"neće uspjeti, jer XFS treba vrlo velik pokretački program)."
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
 "\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
 msgstr ""
-"Proizvoljna boot disketa omogućava način podizanja vašeg Linux sustava bez\n"
-"ovisnosti o normalnom bootloader-u. Ovo je korisno ukoliko ne želite "
-"instalirati\n"
-"SILO na vaš sustav, ili je drugi operativni sustav uklonio SILO, ili SILO "
-"ne\n"
-"želi raditi sa vašom konfiguracijom hardware-a. Proizvoljna boot disketa "
-"također može biti korištena sa\n"
-"Mandrake spasonosnom slikom, omogućavajući tako lakše spašavanje od raznih "
-"sustavskih\n"
-"grešaka.\n"
-"\n"
-"Ako želite napraviti boot disketu za vaš sustav, ubacite disketu u prvi\n"
-" pogon i pritisnite \"U redu\"."
 
-#: ../../bootloader.pm:1
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Ne možete instalirati bootloader na %s particiju\n"
+#: ../../modules/parameters.pm:1
+#, fuzzy, c-format
+msgid "comma separated strings"
+msgstr "Formatiraj particije"
 
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "not enough room in /boot"
-msgstr "nema dovoljno mjesta u /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Osvjetljeni zapis biti će bootiran automatski za %d sekundi."
+msgid "Messages"
+msgstr "Poruke"
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "naredbe prije bootiranja ili 'c' za komandnu liniju."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr ""
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite ENTER za bootiranje izabranog OS, 'e' za promjenu"
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "POP and IMAP Server"
+msgstr "LDAP Poslužitelj"
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Za mijenjanje izabranog sustava pritisnite tipke %c i %c."
+msgid "Mexico"
+msgstr "Meksiko"
 
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Dobro dosli u GRUB izbornik operativnih sustava!"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "Postavka opterećenja"
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Rwanda"
 
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "Da li imate %s međusklopova?"
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "LILO with text menu"
-msgstr "LILO sa tekstualnim menijem"
+msgid "Switzerland"
+msgstr "Switzerland"
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO sa grafičkim menijem"
+msgid "Brunei Darussalam"
+msgstr "Brunei Darussalam"
 
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Postavke udaljenog lpd pisača"
 
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
 "\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
 msgstr ""
-"Dobro dosli u %s izbornik operativnih sustava!\n"
+"GNU/Linux je višekorisnički sustav, i to znači da svaki korisnik može imati\n"
+"vlastita podešenja, vlastite datoteke itd. Možete pročitati ``User Guide''\n"
+"da naučite više. Za razliku od \"root\"-a, koji je administrator, korisnici\n"
+"koje ćete dodati ovdje neće imati ovlaštenja za mijenjanje ničega osim "
+"vlastitih\n"
+"datoteka ili vlastitih postavki. Morati ćete napraviti najmanje jednog "
+"normalnog\n"
+"korisnika za vas. Taj račun ćete koristiti za prijavljivanje za rutinsko\n"
+"korištenje. Iako je vrlo praktično se prijaviti kao \"root\" svaki dan,\n"
+"to može biti vrlo opasno! Najmanja pogreška može značiti da vaš sustav\n"
+"neće više moći raditi. Ako napravite ozbiljnu grešku kao normalan korisnik,\n"
+"možete izgubiti samo neke informacije, ali ne cijeli sustav.\n"
 "\n"
-"Izaberite operativni sustav u popisu iznad ili\n"
-"pričekajte %d sekundi za uobičajeno podizanje.\n"
+"Prvo, morate unijeti vaše pravo ime. Ono nije obvezno, naravno\n"
+"možete ustvari unijeti što god želite. DrakX će tada uzeti prvu riječ koju\n"
+"ste unijeli u to polje i prenijeti je u \"Korisničko ime\". To je ime kojim "
+"će \n"
+"se taj konkretni korisnik prijavljivati u sustav. Možete ga mijenjati. "
+"Tada \n"
+"morate ovdje upisati lozinku. Sa gledišta sigurnosti, lozinka "
+"neprivilegiranog \n"
+"(običnog) korisnika nije toliko važna kao \"root\" lozinka, ali je ne treba "
+"zbog\n"
+"toga zanemarivati: naposlijetku, radi se o vašim datotekama.\n"
 "\n"
+"Ako pritisnete \"Prihvati korisnika\", možete ih dodati koliko želite. "
+"Dodajte\n"
+"korisnika za svakog prijatelja: oca ili sestru, npr. Kada ste dodali sve "
+"korisnike\n"
+"koje ste željeli, stisnite \"Završi\".\n"
+"\n"
+"Pritiskanjem na \"Napredno\" možete promijeniti predodređenu \"ljusku\" za "
+"tog\n"
+"korisnika (bash je predodređen)."
 
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "consolehelper missing"
-msgstr "nedostaje consolehelper"
+msgid "Configure Internet Access..."
+msgstr "Podešavanje Internet Pristupa..."
 
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "kdesu missing"
-msgstr "kdesu nedostaje"
+msgid "Norway"
+msgstr "Norveška"
 
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Screenshotovi će biti raspoloživi poslije instalaciju u %s"
+msgid "Danish"
+msgstr "Danska"
 
-#: ../../common.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Ne mogu napraviti screenshotove prije particioniranja"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"Automatski uključuje numlock tipku u konzoli i\n"
+"XFree-u pri podizanju."
 
-#: ../../common.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "%d seconds"
-msgstr "%d sekundi"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Molim unesite IP postavke za ovaj stroj.\n"
+"Svaka stavka treba biti unesena kao  IP adresa odvojena\n"
+"točkama (npr. 1.2.3.4)"
 
-#: ../../common.pm:1
-#, c-format
-msgid "1 minute"
-msgstr "1 minuta"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"Mandrake Linux instalacija je proširena na nekoliko CDROMova. DrakX\n"
+"zna ukoliko se odabrani paket nalazi na drugom CDROMu i izbaciti će\n"
+"trenutni CD i pitati vas da ubacite drugi koji je potreban."
 
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "%d minutes"
-msgstr "%d minuta"
+msgid "Processors"
+msgstr ""
 
-#: ../../common.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "TB"
-msgstr "TB"
+msgid "Bulgaria"
+msgstr "Bugarska"
 
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "Nije povezan"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "GB"
-msgstr "GB"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbard and Jan Mayen Islands"
 
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "MB"
-msgstr "MB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"Došlo je do problema tijekom namještanja. Provjerite vezu putem "
+"net_monitora\n"
+"ili mcca. Ako vaša veza ne radi, možda ćete morati ponovno pokrenuti\n"
+"konfiguraciju"
 
-#: ../../common.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "KB"
-msgstr "KB"
+msgid "partition %s is now known as %s"
+msgstr "particija %s je sada poznata kao %s"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "United States"
-msgstr "Sjedinjene Američke Države"
+msgid "Backup Other files..."
+msgstr "Sigurnosna pohrana drugih datoteka"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Austria"
-msgstr "Austrija"
+msgid "SMB server IP"
+msgstr "IP SMB poslužitelja"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Italy"
-msgstr "Italija"
+msgid "Congo (Kinshasa)"
+msgstr ""
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Netherlands"
-msgstr "Nizozemska"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Particijska tablica pogona %s će sada biti zapisana na disk!"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing HPOJ package..."
+msgstr "Instaliram pakete..."
+
+#: ../../any.pm:1
 #, c-format
-msgid "Sweden"
-msgstr "Švedska"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Proizvoljna boot disketa omogućava način podizanja vašeg Linux sustava bez\n"
+"ovisnosti o normalnom bootloader-u. Ovo je korisno ukoliko ne želite "
+"instalirati\n"
+"LILO (ili grub) na vaš sustav, ili je drugi operativni sustav uklonio LILO, "
+"ili LILO ne\n"
+"želi raditi sa vašom konfiguracijom hardware-a. Proizvoljna boot disketa "
+"također može biti korištena sa\n"
+"Mandrake spasonosnom slikom, omogućavajući tako lakše spašavanje od raznih\n"
+" sustavskih grešaka.\n"
+"Da li želite napraviti proizvoljnu boot disketu za vaš sustav?\n"
+"%s"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ", USB printer \\#%s"
+msgstr ", USB pisač \\/*%s"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Norway"
-msgstr "Norveška"
+msgid "Latvian"
+msgstr "Latvija"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Greece"
-msgstr "Grčka"
+msgid "monthly"
+msgstr "svaki mjesec"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Germany"
-msgstr "Njemačka"
+msgid "Module name"
+msgstr "Ime modula"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Czech Republic"
-msgstr "Češka Republika"
+msgid "Start at boot"
+msgstr "Pokrenuto pri podizanju"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "Koristi inkrementalnu pohranu (ne zamjenjuje stare pohrane)"
+
+#: ../../any.pm:1
 #, c-format
-msgid "Belgium"
-msgstr "Belgija"
+msgid "First sector of drive (MBR)"
+msgstr "Prvi sektor pogona (MBR)"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "France"
-msgstr "Francuska"
+msgid "Joystick"
+msgstr ""
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Costa Rica"
-msgstr "Kosta Rika"
+msgid "El Salvador"
+msgstr "El Salvador"
 
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Greška prilikom otvaranja %s za pisanje: %s"
+msgid "Use Unicode by default"
+msgstr ""
 
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Nothing to do"
-msgstr "Nema ništa za uraditi"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr ""
 
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Nema dovoljno slobodnog prostora za auto-alokaciju"
+msgid "Trying to rescue partition table"
+msgstr "Pokušavam spasiti particijsku tablicu"
 
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Ne možete koristiti enkriptirani datotečni sustav za točku montiranja %s"
+msgid "Option %s must be an integer number!"
+msgstr "Opcija %s mora biti cijeli broj!"
 
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
+#: ../../interactive/stdio.pm:1
+#, c-format
 msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+"Entries you'll have to fill:\n"
+"%s"
 msgstr ""
-"Treba vam istinski datotečni sustav (ex2, reiserfs) za ovo mjesto "
-"montiranja\n"
+"Unosi koje trebate popuniti:\n"
+"%s"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
 #, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Ovaj direktorij bi trebao ostati unutar root datotečnog sustava"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Ne mogu pokrenuti živu nadogradnju !!!\n"
 
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ne možete koristiti LVM logički prostor za mjesto montiranja %s"
+msgid "Name: "
+msgstr "Ime: "
 
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Izabrali ste softwaresku RAID particiju kao root (/).\n"
-"Nema bootloader-a koji je u mogućnosti to podržati bez /boot particije.\n"
-"Zato budite pažljivi da dodate /boot particiju"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "16 million colors (24 bits)"
+msgstr "16 milijuna boja (24 bita)"
 
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Već postoji particija sa mjestom montiranja %s\n"
+msgid "Allow all users"
+msgstr "Dozvoli svim korisnicima"
 
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Ime pisača može sadržavati samo slova, brojeve i podvlaku"
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "The official MandrakeSoft Store"
+msgstr ""
 
-#: ../../fsedit.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Mjesto montiranja mora početi sa /"
+msgid "Resizing"
+msgstr "Mijenjam veličinu"
 
-#: ../../fsedit.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "ReiserFS se ne može koristiti na particijama koje su manje od 32 MB"
+msgid "Cable connection"
+msgstr "Kablovska veza"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "JFS se ne može koristiti na particijama koje su manje od 16 MB"
+msgid "User"
+msgstr "Korisnik"
 
 #: ../../fsedit.pm:1
 #, fuzzy, c-format
@@ -999,1228 +1771,244 @@ msgstr ""
 "\n"
 "Da li se slažete da izgubite sve particije?\n"
 
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Error"
-msgstr "Greška"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
+"Napravi novu sigurnosnu pohranu prije povrata (samo za inkrementalne "
+"pohrane.)"
 
-#: ../../fsedit.pm:1
-#, c-format
-msgid "server"
-msgstr "poslužitelj"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer on parallel port \\#%s"
+msgstr "Pisač na paralelnom portu \\/*%s"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Name"
+msgstr "Ime: "
+
+#: ../../raid.pm:1
 #, c-format
-msgid "with /usr"
-msgstr "sa /usr"
+msgid "mkraid failed"
+msgstr "mkraid nije uspio"
 
-#: ../../fsedit.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "simple"
-msgstr "jednostavno"
+msgid "Button 3 Emulation"
+msgstr "Emulacija 3 gumba"
 
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "Formatiram particiju %s"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Sending files..."
+msgstr "Šaljem datoteke..."
 
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "error unmounting %s: %s"
-msgstr "greška kod demontiranja %s: %s"
+msgid "Israeli (Phonetic)"
+msgstr "Izraelska (fonetska)"
 
-#: ../../fs.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "montiranje particije %s u direktorij %s neuspješno"
+msgid "access to rpm tools"
+msgstr "pristup rpm alatima"
 
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "Formatiram particiju %s"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "edit"
+msgstr ""
 
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Checking %s"
-msgstr "Kopiram %s"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "You must choose/enter a printer/device!"
+msgstr "Morate izabrati/upisati pisač/uređaj!"
 
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiram particiju %s"
+msgid "Permission problem accessing CD."
+msgstr ""
 
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Creating and formatting file %s"
-msgstr "Stvaram i formatiram datoteku %s"
+msgid "Phone number"
+msgstr "Telefonski broj"
 
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ne znam kako formatirati %s kao vrstu %s"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr ""
 
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatiranje %s nije uspjelo"
+msgid "Printer name, description, location"
+msgstr "Ime pisača, opis, lokacija"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Izaberite \"U redu\" ukoliko želite obrisati sve podatke i\n"
-"postojeće particije na navedenom tvrdom disku. Budite pažljivi, nakon\n"
-"klikanja na \"U redu\", nećete moći povratiti bilo kakve postojeće podatke "
-"ili\n"
-"particije na ovom hard disku, uključujući Windows podatke.\n"
-"\n"
-"Pritisnite na \"Odustani\" za prekidanje ove operacije bez gubljenja bilo\n"
-"kakvih postojećih podataka i particija na ovom hard disku."
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (broadcast)"
+msgstr "SAD (bcast)"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Izaberite hard disk kojeg želite obrisati kako bi instalirali vašu\n"
-"novu Mandrake Linux particiju. Budite pažljivi, svi postojeći podaci\n"
-"biti će izgubljen i neće se moći povratiti!"
+"Please choose the\n"
+"media for backup."
+msgstr "Izaberite medij za pohranu."
 
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
-msgstr ""
+msgid "Use Xinerama extension"
+msgstr "Koristi Xinerama proširenje"
 
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
+msgid "Loopback"
+msgstr "Loopback"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakfloppy:1
+#, c-format
 msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
 msgstr ""
-"Yaboot je bootloader za NewWorld MacIntosh hardware. Može\n"
-"podići GNU/Linux, MacOS, ili MacOSX, ukoliko postoje na vašem računalu.\n"
-"Obično, ti drugi operativni sustavi su ispravno pronađeni i\n"
-"instalirani. Ukoliko to nije slučaj, možete dodati unos ručno na ovom\n"
-"zaslonu. Budite pažljivi da izaberete ispravne parametre.\n"
-"\n"
-"Glavne opcije Yaboota su:\n"
-"\n"
-" * Init Poruka: Jednostavna tekst poruka koja se prikaže prije pitanja o\n"
-"podizanju.\n"
-"\n"
-" * Boot Uređaj: Označava gdje želite staviti informaciju potrebnu za \n"
-"podizanje GNU/Linux-a. Općenito, bootstrap particiju namještate prije, \n"
-"da sadrži ovu informaciju.\n"
-"\n"
-" * Otvorena Firmware Pauza: Za razliku od LILO-a, postoje dvije raspoložive\n"
-"pauze sa yaboot-om.  Prva pauza se mjeru sekundama i na tom mjestu možete \n"
-"birati izmežu CD-a, OF boot-a, MacOS-a ili Linux-a.\n"
-"\n"
-" * Kernel Boot Čekanje: Ovo čekanje je slično LILO boot čekanju. Poslije \n"
-"izabiranja Linux-a, imati ćete pauzu od 0.1 sekunde prije nego "
-"podrazumijevani\n"
-"kernel opis bude odabran.\n"
-"\n"
-" * Omogući CD Boot?: Postavljanje ove opcije će vam dozvoliti da možete\n"
-"izabrati 'C' za CD na prvom pitanju pri podizanju.\n"
-"\n"
-" * Omogući OF Boot?: Postavljanje ove opcije će vam dozvoliti da možete\n"
-"izabrati 'N' za Open Firmware prvi prvom pitanju pri podizanju.\n"
-"\n"
-" * Podrazumijevani OS: Možete izabrati koji OS ćete podići podrazumijevano\n"
-"kada Open Firmware pauza istekne."
+"Ne mogu ispravno zatvoriti mkbootdisk: \n"
+" %s \n"
+" %s"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
-msgstr ""
-"Možete dodati dodatne unose za yaboot, ili za drugi operativni sustav,\n"
-"alternativne kernele, ili za spasonosnu boot sliku.\n"
-"\n"
-"Za druge OS-ove - unos se sastoji samo od labele i \"root\" particije.\n"
-"\n"
-"Za Linux, postoji nekoliko mogućih opcija: \n"
-"\n"
-" * Labela: Jednostavno, ovo je ime koje ćete napisati u yaboot promptu za\n"
-"odabir ove boot opcije.\n"
-"\n"
-" * Slika: Ovo je ime kernela koji se podiže. Tipično vmlinux ili\n"
-"varijacija vmlinux-a sa ekstenzijom;\n"
-"\n"
-" * Root: \"root\" uređaj ili '/' za vašu Linux instalaciju.\n"
-"\n"
-" * Dodatak: Na Apple hardware-u, kernel dodatak opcija se koristi vrlo često "
-"za\n"
-"pomoć pri inicijaliziranju video hardware-a, ili za omogućavanje emulacije\n"
-"tipaka na mišu tipkovnicom zbog čestog nedostatka 2-og ili 3-eg tipke na "
-"Apple\n"
-" miševima. Neki primjeri:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-" * Initrd: Ova opcija se može koristiti ili za učitavanje inicijalnih\n"
-"modula, prije nego što je boot\n"
-"uređaj raspoloživ, ili za učitavanje ramdisk slike za spasonosne boot "
-"situacije.\n"
-"\n"
-" * Initrd-veličina: Podrazumijevana veličina ramdisk-a je općenito 4096\n"
-"byte-ova. Ukoliko trebate alocirati veći ramdisk, ova opcija može biti "
-"korištena.\n"
-"\n"
-" * Čitaj-Piši: Normalno je \"root\" particija inicijalno podignuta u čitaj-"
-"samo,\n"
-"radi mogućnosti provjere datotečnog sustava prije nego sustav postane "
-"'živ'.\n"
-"Možete premostiti tu opciju ovdje.\n"
-"\n"
-" * NoVideo: Ako se Apple hardware pokaže kao iznimno problematičan, možete\n"
-"izabrati ovu opciju za podizanje u 'novideo' modu, sa native framebuffer "
-"podrškom.\n"
-"\n"
-" * Podrazumijevano: Izabire ovaj unos kao podrazumijevani Linux izbor,\n"
-"moguće izbirati pritiskom ENTER-a na yaboot pitanju. Ovaj unos će također\n"
-"biti označen sa '*', ukoliko stisnete [Tab] za pregledavanje boot izbora."
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "West Europe"
+msgstr "Zapadna Europa"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone.pm:1
+#, c-format
 msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
 "\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
+"OPTIONS:\n"
+"  --help            - print this help message.\n"
+"  --report          - program should be one of mandrake tools\n"
+"  --incident        - program should be one of mandrake tools"
 msgstr ""
-"DrakX sada pretražuje IDE uređaje prisutne u vašem računalu.Također će "
-"pokušati\n"
-"pronaći PCI SCSI adapter(e). Ukoliko DrakX\n"
-"pronađe SCSI adapter i zna koji upravljački program da koristi, on će \n"
-"automatski biti instaliran.\n"
-"\n"
-"Ukoliko imate SCSI adapter, ISA SCSI adapter ili PCI SCSI adapter koji\n"
-"DrakX ne može prepoznati, biti ćete pitani da li imate SCSI adapter u vašem\n"
-"sustavu. Ukoliko nemate adapter, možete kliknuti na \"Ne\". Ukoliko kliknete "
-"na\n"
-"\"Da\", dobiti ćete popis upravljačkih programa odakle možete izabrati vaš\n"
-"specifičan adapter.\n"
-"\n"
-"Ako trebate ručno specifirati vaš adapter, DrakX će pitati da li želite \n"
-"specifirati opcije za njega. Trebali biste dozvoliti DrakX-u da isproba "
-"opcije za\n"
-"hardware. Ovo obično radi dobro.\n"
-"\n"
-"Ako ne, trebati ćete navesti opcije za upravljački program. Molimo\n"
-"pregledajte User\n"
-"Guide (poglavlje 3, sekciju \"Collecting informations on your hardware\") "
-"za\n"
-"preporuke o pribavljanju ovih informacija iz dokumentacije hardware-a, sa \n"
-"proizvođačevog Web site-a (ukoliko imate Internet pristup) ili iz Microsoft "
-"Windows-a\n"
-"(ukoliko ga imate na vašem sustavu)."
 
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
-"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
-msgstr ""
-"Ovdje biramo sustav za ispis za vaše računalo. Drugi OSovi možda nude "
-"jedan,\n"
-"ali Mandrake Linux nudi tri.\n"
-"\n"
-" * \"pdq\", što znači ``print, don't queue'' (ispiši, bez stavljanja u red), "
-"je\n"
-"izbor koji ćete koristiti ako imate izravnu vezu sa pisačem, želite izbjeći\n"
-"zastoje u ispisu i nemate pisače u mreži. Ima samo jednostavne mrežne "
-"mogućnosti\n"
-"i ponešto je spor za mrežu. Izaberite \"pdq\" ako ste novi u GNU/Linuxu. "
-"Možete\n"
-"promijeniti odabir poslije instalacije pokretanjem PrinterDrakea iz "
-"Mandrake\n"
-"kontrolnog centra i pritiskom na dugme za stručnjake.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', je izvrstan za ispis na vašem "
-"lokalnom\n"
-"računalu, kao i za ispis na drugom kraju svijeta. Jednostavan je i može "
-"poslužiti\n"
-"kao poslužitelj i klijent za drevni \"lpd\" sustav za ispis. Dakle, "
-"kompatibilan je\n"
-"s ranijim sustavima. Ima mnoštvo trikova, ali osnovne postavke su gotovo\n"
-"jednostavne kao i \"pdq\". Ako trebate da vam emulira \"lpd\" poslužitelj, "
-"morate\n"
-"uključiti \"cups-lpd\" daemon. Ima grafička sučelja za ispis i za odabir "
-"opcija\n"
-"za ispis.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. Ovaj sustav može raditi\n"
-"otprilike iste stvari kao i ostali, ali će pisati i s pisačima u Novell "
-"mreži,\n"
-"jer podržava IPX protokol, i može ispisivati izravno u komande ljuske. Ako "
-"vam\n"
-"treba Novell ili ispis u komande bez korištenja preusmjeravanja, koristite "
-"lprNG.\n"
-"Inačem CUPS je najbolji jer je jednostavniji i bolje radi preko mreže."
+msgid "Harddrake2 version %s"
+msgstr "Otkrivanje hard diskova"
 
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
+msgid "Copying %s"
+msgstr "Kopiram %s"
 
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"LILO (the LInux LOader) i Grub su bootloaderi: oni su u mogućnosti podići\n"
-"ili GNU/Linux ili bilo koji drugi postojeći operativni sustav na vašem\n"
-"računalu.\n"
-"Normalno, ti drugi operativni sustavi su ispravno pronađeni i\n"
-"instalirani. Ako to nije slučaj, možete ga dodati ručno na ovom\n"
-"zaslonu. Budite pažljivi da izaberete ispravne parametre.\n"
-"\n"
-"Također ćete poželiti ne dati pristup tim drugim operativnim sustavima\n"
-"drugima, u tom slučaju možete obrisati odgovarajuće unose. Ali\n"
-"u tom slučaju, trebati ćete boot disketu kako bi ih mogli podići!"
+msgid "Choose color"
+msgstr "Odaberite monitor"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"LILO i grub su GNU/Linux bootloaderi. Ovaj korak je obično potpuno "
-"automatiziran.\n"
-"U stvarim DrakX analizira boot sektor diska i ponaša se u skladu s onim što "
-"je\n"
-"tamo pronašao:\n"
-"\n"
-" * ako je pronađen Windows boot sektor, bit će zamijenjen sa grub/LILO boot "
-"sektorom.\n"
-"Prema tome, moći ćete podizati ili GNU/Linux ili neki drugi OS;\n"
-"\n"
-" * ako je pronađen grub/LILO boot sektor, bit će zamijenjen sa novim.\n"
-"\n"
-"Ako postoji neka dvojba, DrakX će izbaciti dijalog za različitim opcijama.\n"
-"\n"
-" * \"Koji bootloader koristiti\": imate tri izbora:\n"
-"\n"
-"    * \"GRUB\": ako preferirate grub (tekstualni izbornik).\n"
-"\n"
-"    * \"LILO sa grafičkim izbornikom\": ako preferirate LILO sa svojim\n"
-"grafičkim sučeljem.\n"
-"\n"
-"    * \"LILO sa tekstualnim izbornikom\": ako preferirate LILO sa svojim\n"
-"tekstualnim sučeljem.\n"
-"\n"
-" * \"Boot uređaj\": u većini slučajeva, nećete mijenjati podrazumijevani\n"
-"(\"/dev/hda\"), ali ak vam je tako draže, bootloader se može instalirati na "
-"drugi\n"
-"tvrdi disk (\"/dev/hdb\"), ili čak na disketu (\"/dev/fd0\");\n"
-"\n"
-" * \"Vrijeme do podizanja podrazumijevane slike\": kada pokrećete računalo,\n"
-"ovo je vrijeme koje korisnik ima da u bootloader izborniku izabere drugi "
-"izbor\n"
-"od podrazumijevanog.\n"
-"\n"
-"!! Pazite da, ako izaberete da se bootloader ne instalira (pritiskom na\n"
-"\"Odustani\"), morate na neki drugi način osigurati podizanje Mandrake/"
-"Linux\n"
-"sustava! Također, budite sigurni da znate što radite prije mijenjanja "
-"opcija. !!\n"
-"\n"
-"Pritiskom na \"Napredno\" u ovom dijalogu dobit ćete mnoštvo naprednih "
-"opcija,\n"
-"rezerviranih za napredne korisnike.\n"
-"\n"
-"Nakon što ste namjestili opće parametre bootloadera, bit će prikazan popis "
-"opcija\n"
-"za podizanje sustava koje će biti dostupne prilikom podizanja sustava.\n"
-"\n"
-"Ako postoji neki drugi operacijski sustav instaliran na vašem računalu, "
-"automatski\n"
-"će biti dodan boot izborniku. Ovdje možete fino podesiti postojeće opcije. "
-"Izaberite\n"
-"stavku i stisnite \"Promijeni\" da bi je promijenili ili uklonili; \"Dodaj\" "
-"stvara\n"
-"novu stavku; i \"Završi\" kreće dalje na slijedeći instalacijski korak."
+#: ../../lang.pm:1
+#, c-format
+msgid "Dominican Republic"
+msgstr "Dominikanska Republika"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"Ovo je najvažnija odluka za sigurnost vašeg GNU/Linux sustava: morate "
-"unijeti\n"
-"\"root\" lozinku. \"root\" je sustavski administrator i jedini koji je "
-"ovlašten\n"
-"da vrši nadogradnje, dodaje korisnike, mijenja cjelokupne postavke sustava, "
-"itd.\n"
-"Ukratko, \"root\" može raditi sve! Stoga morate izabrati lozinku koju je "
-"teško\n"
-"pogoditi, DrakX će vam reći da li je prelagana. Kao što vidite, možete "
-"odabrati\n"
-"da ne unesete lozinku, ali jako vam savjetujemo da to ne činite, barem zbog\n"
-"jednog razloga: nemojte mislite da, zbog tog što ste pokrenuli GNU/Linux, su "
-"vaši\n"
-"ostali operacijski sustavi sigurni od grešaka. Pošto \"root\" može "
-"premostiti\n"
-"sva ograničenja i nenamjerno obrisati sve podatke na particijama nemarnim "
-"pristupanjem,\n"
-"važno je da bude teško postati \"root\".\n"
-"\n"
-"Lozinka bi trebala biti kombinacija alfanumeričkih znakova i barem 8 znakova "
-"duga.\n"
-"Nikad ne zapisujte \"root\" lozinku, prelako dovodite sustav u opasnost.\n"
-"\n"
-"Ipak, nemojte izabrati predugu ili presloženu lozinku, jer ćete je morati "
-"lako\n"
-"zapamtiti.\n"
-"\n"
-"Lozinka se neće pojaviti na ekranu kako je budete upisivali. Zato je morate\n"
-"upisati dvaput da bi smanjili mogućnost greške pri upisu. Ako ipak ponovite "
-"istu\n"
-"grešku dva puta, morat ćete koristiti ovu \"netočnu\" lozinku kada se prvi "
-"put\n"
-"budete prijavljivali.\n"
-"\n"
-"U stručnjak modu, bit ćete zapitani da li ćete se spajati na "
-"autentifikacijski\n"
-"poslužitelj, poput NISa ili LDAPa.\n"
-"\n"
-"Ako vaša mreža koristi LDAP (ili NIS) protokole za autentifikaciju, "
-"izaberite\n"
-"\"LDAP\" (ili \"NIS\") kao autentifikaciju. Ako ne znate kako, pitajte\n"
-"administratora mreže.\n"
-"\n"
-"Ako vaše računalo nije povezano sa administriranom mrežom, morat ćete "
-"izabrati\n"
-"\"Lokalne datoteke\" za autentifikaciju."
+#: ../../lang.pm:1
+#, c-format
+msgid "Swaziland"
+msgstr "Swaziland"
 
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
+msgid "Set-UID"
 msgstr ""
-"Molim odaberite ispravni port. Na primjer, COM1 port pod MS Windowsima\n"
-"se,  pod GNU/Linuxom zove \"ttyS0\"."
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-"DrakX obično prepozna koliko vaš miš ima dugmeta. Ako ne, pretpostavlja da\n"
-"imate miš sa dva dugmeta, a treće će emulirati. DrakX će automatski znati da "
-"li\n"
-"se radi o PS/2, serijskom ili USB mišu.\n"
-"\n"
-"Ako želite odrediti drugačiji tip miša, odaberite odgovarajući tip iz "
-"ponuđenog\n"
-"popisa.\n"
-"\n"
-"Ako izaberete miš različit od podrazumijevanog, prikazati će se testni "
-"ekran.\n"
-"Koristite dugmad i kotačić da potvrdite da li su postavke točne. Ako miš ne "
-"radi\n"
-"dobro, stisnite razmaknicu ili [Return] da bi odustali i ponovno izabirali."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please check if you are using CDRW media"
+msgstr "Naznačite da li koristite CDRW medij"
 
 #: ../../help.pm:1
 #, fuzzy, c-format
 msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
 msgstr ""
-"Izaberite jezik kojim se želite služiti u instalaciji i sustavu.\n"
-"\n"
-"Pritiskom na \"Napredno\" moći ćete izabrati druge jezike koji će biti "
-"instalirani\n"
-"na vašu radnu stanicu. Odabiranjem drugih jezika instalirat će se "
-"specifične\n"
-"jezične datoteke za sustavsku dokumentaciju i aplikacije. Npr. ako ćete na "
-"svom\n"
-"računalu imati korisnike iz Španjolske, u stablu odaberite Engleski kao "
-"glavni\n"
-"jezik i u sekciji Napredno označite kućicu koja odgovara Španjolskoj.\n"
-"\n"
-"Primjetite da se može instalirati više jezika. Kada odredite eventualne "
-"dodatne\n"
-"lokale, stisnite \"U redu\" za nastavak."
+"Izaberite hard disk kojeg želite obrisati kako bi instalirali vašu\n"
+"novu Mandrake Linux particiju. Budite pažljivi, svi postojeći podaci\n"
+"biti će izgubljen i neće se moći povratiti!"
 
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"Obično, DrakX izabere pravu tipkovnicu za vas (ovisno o jeziku koji ste "
-"odabrali)\n"
-"i nećete ni vidjeti ovaj korak. Međutim, možda nemate tipkovnicu koja točno\n"
-"odgovara vašem jeziku: npr. ako ste iz Švicarske a govorite engleski, možda\n"
-"svejedno želite švicarsku tipkovnicu. Ili ako govorite engleski, a živite u\n"
-"Quebecu, možda ćete se naći u sličnoj situaciji. U oba slučaja, morate se "
-"vratiti\n"
-"na ovaj instalacijski korak i odabrati odgovarajuću tipkovnicu iz popisa.\n"
-"\n"
-"Pristisnite \"Dodatno\" da biste dobili potpun popis podržanih tipkovnica."
+msgid " on parallel port \\#%s"
+msgstr " na paralelnom portu \\/*%s"
 
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Za mijenjanje izabranog sustava pritisnite tipke %c i %c."
 
-#: ../../help.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "Generički miš s 2 gumba"
 
-#: ../../help.pm:1
+#: ../../lvm.pm:1
 #, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Više od jedne Microsoft Windows particije su pronađene\n"
-"na vašem hard disku. Molimo izaberite jednu kojoj želite promjeniti "
-"veličinu\n"
-"kako bi instalirali vaš novi Mandrake Linux operativni sustav.\n"
-"\n"
-"Svaka je particija popisana kako slijedi; \"Linux ime\", \"Windows ime\"\n"
-"\"Kapacitet\".\n"
-"\n"
-"\"Linux ime\" je kodirano kako slijedi: \"tip hard diska\", \"broj hard diska"
-"\",\n"
-"\"broj particije\" (naprimjer, \"hda1\").\n"
-"\n"
-"\"Tip hard diska\" je \"hd\" ukoliko je hard disk - IDE hard disk i \"sd\"\n"
-"ukoliko je on SCSI hard disk.\n"
-"\n"
-"\"Broj hard diska\" je uvijek slovo poslije \"hd\" ili \"sd\". Sa IDE hard\n"
-"diskovima:\n"
-"\n"
-"   * \"a\" znači \"master hard disk na primarnom IDE kontroleru\",\n"
-"\n"
-"   * \"b\" znači \"slave hard disk na primarnom IDE kontroleru\",\n"
-"\n"
-"   * \"c\" znači \"master hard disk na sekundarnom IDE kontroleru\",\n"
-"\n"
-"   * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\".\n"
-"\n"
-"Sa SCSI hard diskovima, \"a\" znači \"primarni hard disk\", \"b\" znači\n"
-"\"sekundarni hard disk\", itd...\n"
-"\n"
-"\"Windows ime\" je slovo vašeg hard diska pod Windows-ima (prvi disk\n"
-"ili particija se zove \"C:\")."
+msgid "Remove the logical volumes first\n"
+msgstr "Ukloni logički volumen prvo\n"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"U ovoj točki instalacije, trebate izabrati koje partiticije ćete koristiti "
-"za\n"
-"instalaciju vašeg novog Mandrake Linux sustava. Ukoliko su\n"
-"particije već definirane (iz prethodne instalacije GNU/Linux-a ili iz\n"
-"drugih particijskih alata), možete koristiti postojeće particije. Inače,\n"
-"moraju biti definirane.\n"
-"\n"
-"Za pravljenje particija, morate prvo izabrati tvrdi disk. Možete izabrati \n"
-"disk za particioniranje klikanjem na \"hda\" za prvi IDE disk, \"hdb\" za\n"
-"drugi ili \"sda\" za prvi SCSI disk i tako dalje.\n"
-"\n"
-"Za particioniranje izabranog hard diska, možete izabrati ove opcije:\n"
-"\n"
-" * \"Obriši sve\": ova opcija će obrisati sve raspoložive particije na\n"
-"odabranom hard disku.\n"
-"\n"
-" * \"Auto alokacija\": ova opcija vam dozvoljava da automatski napravite\n"
-"\"Ext2\" i swap particije u slobodnom prostoru vašeg hard diska.\n"
-"\n"
-" * \"Dodatno\": pristup dodatnim mogućnostima:\n"
-"\n"
-"   * \"Spasi particijsku tablicu\": ukoliko je vaša particijska tablica\n"
-"oštećena, možete probati spasiti ju koristeći ovu opciju. Molimo\n"
-"budite pažljivi i zapamtite da ne mora biti uspješna.\n"
-"\n"
-"   * \"Povrati\": možete koristiti ovu opciju za odustajanje od vaših "
-"promjena.\n"
-"\n"
-"   * \"Ponovno učitaj\": možete koristiti ovu opciju ukoliko želite vratiti\n"
-"unazad sve promjene i učitati vašu inicijalnu particijsku tablicu\n"
-"\n"
-"   * \"Čarobnjak\": ukoliko želite koristiti čarobnjak za particioniranje "
-"vašeg\n"
-"hard diska, možete koristiti ovu opciju. Preporučeno je ukoliko \n"
-"nemate dovoljno znanja oko particioniranja.\n"
-"\n"
-"   * \"Vrati sa diskete\": ukoliko ste spremili vašu particijsku tablicu na\n"
-"disketu tijekom prijašnje instalacije, možete\n"
-"je vratiti koristeći ovu opciju.\n"
-"\n"
-"   * \"Spremi na disketu\": ukoliko želite spremiti vašu particijsku tablicu "
-"na\n"
-"disketu kako biste je mogli kasnije vratiti, možete koristiti ovu\n"
-"opciju. Jako je preporučljivo koristiti ovu opciju\n"
-"\n"
-"   * \"Završi\": kada ste završili s particioniranjem vašeg hard diska,\n"
-"koristite ovu opciju za spremanje vaših promjena.\n"
-"\n"
-"Za informaciju, možete dohvatiti bilo koju opciju koristeći tastaturu:\n"
-"navigiranje kroz particije se obavlja koristeći [Tab] i [Up/Down] strelice.\n"
-"\n"
-"Kada je particija odabrana, možete koristiti:\n"
-"\n"
-" * Ctrl-c za pravljenje novih particija (kada je prazna particija\n"
-"izabrana)\n"
-"\n"
-" * Ctrl-d za brisanje particije\n"
-"\n"
-" * Ctrl-m za postavljanje točke montiranja\n"
-"\n"
-"Za informacije o raznim dostupnim datotečnim sustavima, pročitajte ext2fs\n"
-"poglavlje u ``Reference Manual''\n"
-"\n"
-"Ukoliko instalirate na PPC računalo, željet ćete napraviti malu HFS\n"
-"'bootstrap' particiju od najmanje 1MB koju će koristiti\n"
-"yaboot bootloader. Ukoliko se odlučite za pravljenje malo veće \n"
-"particije, recimo 50MB, možete ju pronaći korisnom za stavljanje\n"
-"dodatnog kernela i ramdisk slike u slučaju nužde."
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Osvjetljeni zapis biti će bootiran automatski za %d sekundi."
 
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakboot:1
+#, c-format
 msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
 msgstr ""
-"Sada treba odabrati željenu razinu sigurnosti računala. Opće pravilo jest "
-"da\n"
-"što je više računalo izloženo i podaci vrijedniji, to bi veća razina "
-"sigurnosti\n"
-"trebala biti. Međutim, veća razina sigurnosti utječe na jednostavnost "
-"korištenja.\n"
-"Pogledajte u \"msec\" poglavlje u ``Reference Manual'' za bolje obješnjenje\n"
-"značenja tih razina.\n"
-"\n"
-"Ako ne znate što biste odabrali, ostavite podrazumijevanu opciju."
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Dok instalirate Mandrake Linux, moguće je da su neki paketi već nadograđeni\n"
-"od prvotne inačice. Neki bugovi su možda uklonjeni, i sigurnost poboljšana.\n"
-"Da bi iskoristili prednosti tih nadogradnji, predloženo vam je da ih\n"
-"skinete s Interneta. Izaberite \"Da\" ako ste povezani s Internetom, ili \"Ne"
-"\"\n"
-"ako biste radije instalirali nadograđene pakete kasnije.\n"
-"\n"
-"Odabir \"Da\" prikazuje popis mjesta otkuda se nadogradnje mogu skinuti.\n"
-"Izaberite ono najbliže vama. Tada će se pojaviti stablo za odabir paketa:\n"
-"pregledajte odabir i stisnite \"Instaliraj\" da bi skinuli i instalirali "
-"odabrane\n"
-"pakete, ili \"Odustani\" za prekid."
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Internet pristup"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/draksplash:1
+#, c-format
 msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
 msgstr ""
-"Svaka novo definirana particija mora biti\n"
-"formatirana za korištenje (formatiranje znači pravljenje datotečnog "
-"sustava).\n"
-"\n"
-"Trenutno, možete htjeti ponovno formatirati neke već postojeće particije\n"
-"kako bi obrisali\n"
-"podatke koje one posjeduju. Ukoliko želite to napraviti,\n"
-"izaberite particije koje želite formatirati.\n"
-"\n"
-"Primjetite da nije nužno ponovno formatirati sve već postojeće particije.\n"
-"Morate ponovno formatirati particije koje sadrže operativni sustav (poput \n"
-"\"/\",\"/usr\" ili \"/var\") ali ne morate ponovno formatirati particije "
-"koje\n"
-"sadrže podatke koje želite zadržati (tipično \"/home\").\n"
-"\n"
-"Molimo budite pažljivi odabirom particija, poslije formatiranja, svi podaci\n"
-"će biti obrisani i nećete ih moći povratiti.\n"
-"\n"
-"Pritisnite na \"U redu\" kada ste spremni za formatiranje particije.\n"
-"\n"
-"Pritisnite na \"Odustani\" kada želite izabrati druge particije za\n"
-"instalaciju vašeg novog Mandrake Linux operativnog sustava.\n"
-"\n"
-"Pritisnite na \"Napredno\" ako želite izabrati particije koje će biti\n"
-"provjeravane radi loših blokova (bad blocks)."
 
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
 msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
 msgstr ""
-"Eto. Instalacija je završena i vaš GNU/Linux sustav je spreman za "
-"korištenje.\n"
-"Samo pritisnite \"U redu\" da bi ponovno pokrenuli sustav. Možete pokrenuti\n"
-"GNU/Linux ili Windowse, što god želite (ako imate dva sustava), čim se\n"
-"računalo ponovno podigne.\n"
-"\n"
-"\"Napredno\" dugme (samo u modu za stručnjake) će prikazati još dva "
-"dugmeta: \n"
-"\n"
-" * \"napravi disketu za automatsku instalaciju\": za stvaranje "
-"instalacijske\n"
-"diskete koja će automatski izvršiti čitavu instalaciju bez pomoći "
-"operatora,\n"
-"sličnu instalaciji koju ste upravo namjestili.\n"
-"\n"
-"   Primjetite da su dvije različite opcije dostupne nakon pritiska na "
-"dugme:\n"
-"\n"
-"    * \"Replay\". Ovo je djelomice automatizirana instalacija, pošto\n"
-"particioniranje (i samo to) ostaje interaktivno;\n"
-"\n"
-"    * \"Automatska instalacija\". Potpuno automatizirana instalacija: tvrdi\n"
-"disk se u potpunosti prebrisava, svi podaci se gube.\n"
-"\n"
-"   Ova opcija je dosta korisna pri instaliranju na veći broj sličnih "
-"mašina.\n"
-"Pogledajte odjeljak za automatsku instalaciju na našem web siteu;\n"
-"\n"
-" * \"Snimi odabir paketa\"(*): snima prethodni odabir paketa. Potom, pri "
-"drugoj\n"
-"instalaciji, stavite disketu u pogon i pokrenite instalaciju odlaskom u\n"
-"ekran za pomoć pritiskom na [F1], te zadavanjem >>linux defcfg=\"floppy\"<<\n"
-"naredbe.\n"
-"\n"
-"(*) Trebate FAT formatiranu disketu (da bi je napravili u GNU/Linuxu, "
-"napišite\n"
-"\"mformat a:\")"
+"Da bi dobili popis opcija dostupnih za trenutni pisač stisnite na "
+"\"Popisispisnih opcija\"."
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Omogućujem poslužitelje..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "Ispisujem probnu stranicu(e)..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Već postoji particija sa mjestom montiranja %s\n"
 
 #: ../../help.pm:1
 #, fuzzy, c-format
@@ -2241,51 +2029,49 @@ msgid ""
 "\n"
 "Depending on your hard drive configuration, several options are available:\n"
 "\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
 "\n"
 "   Before choosing this option, please understand that after this\n"
 "procedure, the size of your Microsoft Windows partition will be smaller\n"
 "then when you started. You will have less free space under Microsoft\n"
 "Windows to store your data or to install new software.\n"
 "\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
 "\n"
 "   !! If you choose this option, all data on your disk will be deleted. !!\n"
 "\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
 "\n"
 "   !! If you choose this option, all data on your disk will be lost. !!\n"
 "\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
 msgstr ""
 "U ovom trenutku, trebate izabrati gdje ćete instalirati vaš\n"
 "Mandrake Linux operativni sustav na vašem tvrdom disku. Ukoliko je prazan "
@@ -2360,211 +2146,119 @@ msgstr ""
 "izgubiti sve vaše podatke vrlo lako. Zato,\n"
 "nemojte izabrati ovo rješenje ukoliko ne znate što radite."
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Konačno ćete biti pitani da li želite vidjeti grafičko sučelje pri\n"
-"dizanju. Primjetite da ovo pitanje će biti pitano iako ne želite "
-"istestirati\n"
-"konfiguraciju. Vjerojatno, želite odgovoriti sa \"Ne\" ukoliko će vaše "
-"računalo\n"
-"raditi kao poslužitelj, ili ako niste bili uspješni u konfiguriranju vašeg\n"
-"zaslona."
+msgid "Ukraine"
+msgstr "Ukrajina"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Application:"
+msgstr "Provjera autentičnosti"
+
+#: ../../network/isdn.pm:1
 #, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
+msgid "External ISDN modem"
+msgstr "Vanjski ISDN modem"
 
-#: ../../help.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
+msgid "if set to yes, report check result by mail."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+msgid "Your choice? (default %s) "
+msgstr "Vaš izbor? (uobičajeno %s) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Reunion"
+
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
 "\n"
 "\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
 "\n"
-"   the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
 "\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
 "\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
 "\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
 "\n"
-"   You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
 "\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
 msgstr ""
-"GNU/Linux upravlja vremenom po GMTu (Greenwich Mean Time) i prevodi ga u\n"
-"lokalno vrijeme prema vremenskoj zoni koju ste izabrali. Moguće je, doduše,\n"
-"ovo isključiti isključivanjem odabira \"Hardverski sat namješten na GMT\" "
-"tako\n"
-"da je hardverski sat jednak sustavskom. Ovo je korisno kada se na računalu\n"
-"nalazi drugi operacijski sustav, poput Windows.\n"
+"Testna/e stranica/e su poslane na pisač.\n"
+"Može potrajati neko vrijeme dok ispisivanje ne započne.\n"
+"Status ispisa:\n"
+"%s\n"
 "\n"
-"Opcija \"Automatska sinhronizacija vremena\" će automatski podešavati sat\n"
-"tako da će se povezivati sa vremenskim poslužiteljem na Internetu. Sa "
-"popisa\n"
-"izaberite poslužitelj najbliže vama. Naravno, morate imati ispravnu vezu sa\n"
-"Internetom da bi ovo radilo. Također, instalirat će vremenski poslužitelj "
-"na\n"
-"vaše računalo kojeg, opcionalno, mogu koristiti druga računala u vašoj\n"
-"lokalnoj mreži."
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "daily"
+msgstr "svaki dan"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Sada možete izabrati servise koje želite pokreniti pri podizanju.\n"
-"\n"
-"Ovdje su predstavljeni svi servisi dostupni sa trenutnom instalacijom.\n"
-"Pregledajet ih pažljivo i maknite one koje nisu uvijek potrebni prilikom\n"
-"podizanja sustava.\n"
-"\n"
-"Odabiranjem određenog servisa dobit ćete kratki opis tog servisa. Međutim, "
-"ako\n"
-"niste sigurni je li servis koristan ili ne, sigurnije je ostaviti "
-"predodređeno\n"
-"ponašanje.\n"
-"\n"
-"!! Na ovoj razini obratite pozornost na to da li ćete koristiti stroj kao\n"
-"poslužitelj: vjerojatno ne želite pokretati neke servise koje ne trebate.\n"
-"Prisjetite se da neki servisi mogu biti opasni ako su pokrenuti na "
-"poslužitelju.\n"
-"Općenito, izaberite samo one servise koji vam stvarno trebaju.\n"
-"!!"
+msgid "and one unknown printer"
+msgstr "Dodaj novi pisač"
 
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
+msgid "Ireland"
+msgstr "Irska"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "kernel inačica"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "         Restore Configuration       "
+msgstr "         Povrati postavke          "
+
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Is this the correct setting?"
+msgstr "Da li je ovo ispravno?"
 
 #: ../../help.pm:1
 #, fuzzy, c-format
 msgid ""
 "You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
 "\n"
 "When configuring your network, the available connections options are:\n"
 "traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2604,6191 +2298,6474 @@ msgstr ""
 "Ako želite namjestiti mrežu kasnije, poslije instalacije, ili ste završili\n"
 "namještanje mreže, stisnite \"Odustani\"."
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"Konačno, ovisno o tome da li ste izbrali individualne pakete, prikazat će "
-"vam \n"
-"se stablo sa svim paketima podijeljenim u grupe i podgrupe. Pri "
-"pregledavanju\n"
-"stabla možete izabrati čitave grupe, podgrupe ili pojedine pakete.\n"
-"\n"
-"Kad god izaberet paket na stablu, na desnoj strani se pojavi opisnik. Kada "
-"ste\n"
-"završili odabir, pritisnite \"Instaliraj\", čime ćete pokrenuti proces "
-"instaliranja.\n"
-"Ovisno o brzini računala i broju paketa koji trebaju biti instalirani, "
-"proces može\n"
-"potrajati. Procjena vremena koje će biti potrebno da bi se sve instaliralo "
-"piše\n"
-"na ekranu, da vam pomogne procjeniti imate li vremena za šalicu kave.\n"
-"\n"
-"!! Ako je odabran poslužiteljski paket, namjerno ili jer je pripadao nekoj "
-"grupi,\n"
-"bit ćete upitani da potvrdite da li želite stvarno instalirati te "
-"poslužitelje.\n"
-"Kod Mandrake Linuxa, svi instalirani poslužitelji se pokreću prilikom "
-"podizanja\n"
-"sustava. Čak iako su sigurni, bez poznatih problema u vrijeme izlaska "
-"distribucije,\n"
-"može se dogoditi da se otkriju sigurnosne rupe nakon zgotovljenja ove "
-"inačice\n"
-"Mandrake Linuxa. Ako ne znate što bi pojedini servis trebao raditi ili "
-"zašto \n"
-"se instalira, pritisnite \"Ne\". Pritiskanjem na \"Da\"instalirat će se "
-"navedeni\n"
-"servisi i pokretat će se automatski. !!\n"
-"\n"
-"\"Automatske ovisnosti\" opcija onemogućuje upozorenje koje se pojavi kad "
-"god \n"
-"instalacija automatski izabere paket. Ovo se dešava stoga što je utvrdila "
-"da\n"
-"treba zadovoljiti ovisnost drugim paketom da bi se uspješno završila.\n"
-"\n"
-"Malena ikona diskete na dnu popisa omogućuje učitavanje popisa paketa "
-"izabranih\n"
-"tijekom neke prošle instalacije. Pritiskom na nj upitat će vas da ubacite "
-"disketu\n"
-"napravljenu na kraju neke druge instalacije. Pogledajte drugi savjet u "
-"posljednjem\n"
-"koraku stvaranja takve diskete."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Wizard Configuration"
+msgstr "Postavke čarobnjaka"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Sada treba odrediti koje programe želite instalirati u svoj sustav. Za "
-"Mandrake \n"
-"Linux su dostupne tisuće paketa, i ne morate ih sve znati na pamet.\n"
-"\n"
-"Ako pokrećete standarnu instalaciju sa CD-ROMa, prvo ćete biti upitani da "
-"navedete\n"
-"CDove koje imate (samo u modu za stručnjake). Provjerite imena CDova i "
-"označite\n"
-"kućice koje odgovaraju CDovima koje imate. Pritisnite \"U redu\" kada ste "
-"spremni\n"
-"nastaviti.\n"
-"\n"
-"Paketi su podijeljeni po grupama koje odgovaraju određenoj svrsi. Grupe su \n"
-"podijeljene u četiri sekcije:\n"
-"\n"
-" * \"Radna stanica\": ako ćete koristiti stroj kao radnu stanicu, izaberite\n"
-"jednu ili više odgovarajućih grupa;\n"
-"\n"
-" * \"Razvoj\": ako će se Vaš stroj koristiti za programiranje, izaberite\n"
-"željene grupe;\n"
-"\n"
-" * \"Poslužitelj\": ako je Vaš stroj određen za poslužitelja, moći ćete "
-"odabrati\n"
-"koje od uobičajenih servisa želite instalirati na njega;\n"
-"\n"
-" * \"Grafičko okružje\": naposlijetku, ovdje birate grafičko okružje. Barem "
-"jedno\n"
-"mora biti odabrano ako želite imati grafičku radnu stanicu!\n"
-"\n"
-"Pomicanjem pokazivača miša na ime grupe će se prikazati kratak opis te "
-"grupe. Ako\n"
-"nijedna grupa nije odabrana pri normalnoj instalaciji (za razliku od "
-"nadogradnje),\n"
-"iskočit će dijalog sa predloženim opcijama za minimalnu instalaciju:\n"
-"\n"
-" * \"Sa Xima\": instaliranje što je manje paketa moguće za grafičko "
-"sučelje;\n"
-"\n"
-" * \"Sa osnovnom dokumentacijom\": instalira osnovni sustav sa osnovnim "
-"pomoćnim\n"
-"programima i njihovom dokumentacijom. Ova instalacija je pogodna za "
-"namještanje\n"
-"poslužitelja;\n"
-"\n"
-" * \"Stvarno malena instalacija\": instalirat će strogi minimum potreban da "
-"bi\n"
-"imali Linux sustav koji radi, samo u komandnoj liniji. Ova instalacija je "
-"velika\n"
-"oko 65Mb.\n"
-"\n"
-"Možete provjeriti \"Inividualni odabir paketa\", što je korisno ako ste "
-"upoznati\n"
-"sa ponuđenim paketima ili ako želite imati potpunu kontrolu nad "
-"instaliranim\n"
-"sadržajem.\n"
-"\n"
-"Ako ste pokrenuli instalaciju u \"Nadogradnja\" načinu, možete odselektirati "
-"sve\n"
-"grupe da izbjegnete instaliranje novih paketa. Ovo je korisno za "
-"popravljanje\n"
-"ili osuvremenjivanje postojećeg sustava."
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Autoprobe"
+msgstr "Auto. ispitaj"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"Mandrake Linux instalacija je proširena na nekoliko CDROMova. DrakX\n"
-"zna ukoliko se odabrani paket nalazi na drugom CDROMu i izbaciti će\n"
-"trenutni CD i pitati vas da ubacite drugi koji je potreban."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup system files..."
+msgstr "Sigurnosna pohrana sustavskih datoteka"
 
-#: ../../help.pm:1
+#: ../../install_any.pm:1
+#, c-format
+msgid "Can't use broadcast with no NIS domain"
+msgstr "Ne mogu koristiti broadcast bez NIS domene"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
+msgid "Removing printer \"%s\"..."
+msgstr "Uklanjam pisač \"%s\" ..."
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "drakfloppy"
+msgstr "drakfloppy"
+
+#: ../../standalone/drakpxe:1
+#, c-format
 msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"Please indicate where the auto_install.cfg file is located.\n"
 "\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
 "\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
 msgstr ""
-"Gore su popisane postojeće Linux particije pronađene na\n"
-"vašem hard disku. Možete zadržati izbore napravljene od strane čarobnjaka, "
-"one su dobre za\n"
-"uobičajenu upotrebu. Ukoliko promjenite izbore, morate barem definirati "
-"root\n"
-"particiju (\"/\"). Nemojte izabrati premalu particiju jer nećete moći \n"
-"instalirati dovoljno software-a. Ako želite spremati vaše podatke na "
-"posebnoj particiji,\n"
-"trebate također izabrati \"/home\" (jedino moguće ako imate više od jedne\n"
-"raspoložive Linux particije).\n"
-"\n"
-"\n"
-"Za informaciju, svaka particija je popisana kako slijedi: \"Ime\", "
-"\"Kapacitet\".\n"
-"\n"
-"\n"
-"\"Ime\" je kodirano kako slijedi: \"tip hard diska\", \"broj hard diska\",\n"
-"\"broj particije\" (naprimjer, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tip hard diska\" je \"hd\" ukoliko je hard disk - IDE hard disk i \"sd\"\n"
-"ukoliko je on SCSI hard disk.\n"
-"\n"
-"\n"
-"\"Broj hard diska\" je uvijek slovo poslije \"hd\" ili \"sd\". Sa IDE hard "
-"diskovima:\n"
-"\n"
-" * \"a\" znači \"master hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"b\" znači \"slave hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"c\" znači \"master hard disk na sekundarnom IDE kontroleru\";\n"
-"\n"
-" * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\".\n"
-"\n"
-"\n"
-"Sa SCSI hard diskovima, \"a\" znači \"primarni hard disk\", \"b\" znači "
-"\"sekundarni hard disk\", itd..."
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "information level that can be obtained through the cpuid instruction"
 msgstr ""
-"GNU/Linux je višekorisnički sustav, i to znači da svaki korisnik može imati\n"
-"vlastita podešenja, vlastite datoteke itd. Možete pročitati ``User Guide''\n"
-"da naučite više. Za razliku od \"root\"-a, koji je administrator, korisnici\n"
-"koje ćete dodati ovdje neće imati ovlaštenja za mijenjanje ničega osim "
-"vlastitih\n"
-"datoteka ili vlastitih postavki. Morati ćete napraviti najmanje jednog "
-"normalnog\n"
-"korisnika za vas. Taj račun ćete koristiti za prijavljivanje za rutinsko\n"
-"korištenje. Iako je vrlo praktično se prijaviti kao \"root\" svaki dan,\n"
-"to može biti vrlo opasno! Najmanja pogreška može značiti da vaš sustav\n"
-"neće više moći raditi. Ako napravite ozbiljnu grešku kao normalan korisnik,\n"
-"možete izgubiti samo neke informacije, ali ne cijeli sustav.\n"
-"\n"
-"Prvo, morate unijeti vaše pravo ime. Ono nije obvezno, naravno\n"
-"možete ustvari unijeti što god želite. DrakX će tada uzeti prvu riječ koju\n"
-"ste unijeli u to polje i prenijeti je u \"Korisničko ime\". To je ime kojim "
-"će \n"
-"se taj konkretni korisnik prijavljivati u sustav. Možete ga mijenjati. "
-"Tada \n"
-"morate ovdje upisati lozinku. Sa gledišta sigurnosti, lozinka "
-"neprivilegiranog \n"
-"(običnog) korisnika nije toliko važna kao \"root\" lozinka, ali je ne treba "
-"zbog\n"
-"toga zanemarivati: naposlijetku, radi se o vašim datotekama.\n"
-"\n"
-"Ako pritisnete \"Prihvati korisnika\", možete ih dodati koliko želite. "
-"Dodajte\n"
-"korisnika za svakog prijatelja: oca ili sestru, npr. Kada ste dodali sve "
-"korisnike\n"
-"koje ste željeli, stisnite \"Završi\".\n"
-"\n"
-"Pritiskanjem na \"Napredno\" možete promijeniti predodređenu \"ljusku\" za "
-"tog\n"
-"korisnika (bash je predodređen)."
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Peru"
+msgstr "Peru"
+
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Prije nastavka trebate pažljivo pročitati stavke licence. Ona\n"
-"pokriva cijelu Mandrake Linux distribuciju, i ako se ne slažete u svim\n"
-"stavkama sadržanih u njoj, kliknite na \"Odbij\" gumb koji će automatski\n"
-"završiti instalaciju. Za nastavak instalacije, kliknite na\n"
-"\"Prihvati\" gumb."
+msgid " on device: %s"
+msgstr "Uređaj miša: %s\n"
 
-#: ../../install2.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "You must also format %s"
-msgstr "Morate također formatirati %s"
+msgid "Remove Windows(TM)"
+msgstr "Ukloni Windowse(TM)"
 
-#: ../../install2.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Ne mogu pristupiti kernel modulima koji odgovaraju vašem kernelu (datoteka %"
-"s nedostaje), ovo obično znači da vaša disketa za dizanje sustava nije "
-"usklađena sainstalacijskim medijem (napravite noviju boot disketu)"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Pokreće X Pismovni Poslužitelj (ovo je nužno za XFree da se pokrene)."
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
 msgstr ""
-"Pojavila se greška - ne mogu pronaći niti jedan valjani uređaj na kojem\n"
-"bih mogao instalirati datotečni sustav. Provjerite da li je sa vašim "
-"hardverom sve u redu."
 
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Error reading file %s"
-msgstr "Greška prilikom čitanja datoteke %s"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr "Izaberite datoteku ili mapu fontova i stisnite 'Dodaj'"
 
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+msgid "Madagascar"
+msgstr "Madagaskar"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Urpmi"
 msgstr ""
-"Za korištenje spremljenog odabira paketa, podignite instalaciju sa ``linux "
-"defcfg=floppy''"
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Ova disketa nije FAT formatirana"
+msgid "Cron not available yet as non-root"
+msgstr ""
 
-#: ../../install_any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Umetnite FAT formatiranu disketu u pogon %s"
+msgid "System"
+msgstr "Sustav"
 
-#: ../../install_any.pm:1
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "Do you want to use this feature?"
+msgstr "Da li želite koristiti aboot?"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Ne mogu koristiti broadcast bez NIS domene"
+msgid "Arabic"
+msgstr ""
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
 "\n"
+"- Options:\n"
+msgstr ""
 "\n"
-"Do you really want to remove these packages?\n"
+"- Opcije:\n"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Password required"
+msgstr "Lozinka"
+
+#: ../../common.pm:1
+#, c-format
+msgid "%d minutes"
+msgstr "%d minuta"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Graphics card: %s"
+msgstr "Grafička kartica: %s"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "WebDAV transfer failed!"
 msgstr ""
 
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "No"
-msgstr "Ne"
+msgid "XFree configuration"
+msgstr "XFree postavke"
 
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Yes"
-msgstr "Da"
+msgid "Choose action"
+msgstr "Izaberite akciju"
 
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "French Polynesia"
+msgstr "Francuska Polinezija"
+
+#: ../../help.pm:1
 #, fuzzy, c-format
 msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
 "\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
 "\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
 "\n"
-"Do you really want to install these servers?\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
 msgstr ""
-"Izabrali ste slijedeće poslužitelje: %s\n"
-"\n"
-"\n"
-"Ti poslužitelji biti će postavljeno aktivirani. Oni nemaju poznatih "
-"sigurnosnih\n"
-"propusta, ali neki novi mogu biti pronađeni. U tom slučaju, morate ga "
-"nadograditi\n"
-"što prije moguće.\n"
+"DrakX obično prepozna koliko vaš miš ima dugmeta. Ako ne, pretpostavlja da\n"
+"imate miš sa dva dugmeta, a treće će emulirati. DrakX će automatski znati da "
+"li\n"
+"se radi o PS/2, serijskom ili USB mišu.\n"
 "\n"
+"Ako želite odrediti drugačiji tip miša, odaberite odgovarajući tip iz "
+"ponuđenog\n"
+"popisa.\n"
 "\n"
-"Da li zaista želite instalirati te poslužitelje?\n"
-
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System configuration"
-msgstr "postava upozoravanja"
-
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System installation"
-msgstr "SILO instalacija"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "Onemogućujem mrežu"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing up the network"
-msgstr "Podižem mrežu"
+"Ako izaberete miš različit od podrazumijevanog, prikazati će se testni "
+"ekran.\n"
+"Koristite dugmad i kotačić da potvrdite da li su postavke točne. Ako miš ne "
+"radi\n"
+"dobro, stisnite razmaknicu ili [Return] da bi odustali i ponovno izabirali."
 
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Partitioning failed: %s"
-msgstr "Particioniranje neuspjelo: %s"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Podržava OKI 4w i kompaktibilne win pisače."
 
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX čarobnjak za particioniranje je pronašao slijedeća rješenja:"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Pokreni ALSA (Naprednu Linux Zvučnu Arhitekturu) zvučni sustav"
 
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "I can't find any room for installing"
-msgstr "Ne mogu pronaći bilo kakvo mjesto za instaliranje"
+msgid "Installing driver for %s card %s"
+msgstr "Instaliram upravljački program %s za karticu %s"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
 msgstr ""
-"Sada možete razdijeliti %s.\n"
-"Kada ste gotovi ne zaboravite spremiti postavu sa `w'"
+"Prebacili ste vaš bivši podrazumijevani pisač(\"%s\"), da li bi trebao "
+"bitipodrazumijevani pisač i u novom sustavu %s?"
 
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use fdisk"
-msgstr "Koristi fdisk"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Enable Server"
+msgstr "Poslužitelj baza podataka"
 
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Custom disk partitioning"
-msgstr "Proizvoljno particioniranje diska"
+msgid "Ukrainian"
+msgstr "Ukrajinska"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "SVE postojeće particije i podaci biti će izgubljeni na disku %s"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"Mreža nije pokrenuta. Provjerite postavke i hardver. Zatim probajte "
+"ponovnopodesiti vaš udaljeni pisač."
 
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Imate više od jednog hard diska, na koji želite instalirati Linux?"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Molim, umetnite Boot disketu u pogon %s"
 
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Erase entire disk"
-msgstr "Obriši cijeli disk"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local network(s)"
+msgstr "C-Class lokalna mreža"
 
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Remove Windows(TM)"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
 msgstr "Ukloni Windowse(TM)"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
 msgstr ""
-"Nema FAT particije za mjenjanje veličine ili za korištenje loopback-a (ili "
-"nema dovoljno prostora)"
+"vaš %s skener je podešen.\n"
+"Možete sada skenirati dokumente korištenjem ''XSanea'' izMultimedija/Grafika "
+"u aplikacijskom izborniku."
 
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
+msgid "Firewire controllers"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
 msgstr ""
+"LILO (the LInux LOader) i Grub su bootloaderi: oni su u mogućnosti podići\n"
+"ili GNU/Linux ili bilo koji drugi postojeći operativni sustav na vašem\n"
+"računalu.\n"
+"Normalno, ti drugi operativni sustavi su ispravno pronađeni i\n"
+"instalirani. Ako to nije slučaj, možete ga dodati ručno na ovom\n"
+"zaslonu. Budite pažljivi da izaberete ispravne parametre.\n"
+"\n"
+"Također ćete poželiti ne dati pristup tim drugim operativnim sustavima\n"
+"drugima, u tom slučaju možete obrisati odgovarajuće unose. Ali\n"
+"u tom slučaju, trebati ćete boot disketu kako bi ih mogli podići!"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Mijenjanje FAT veličine nije uspjelo: %s"
+msgid "System mode"
+msgstr "Sistemski mod"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Resizing Windows partition"
-msgstr "Izračunavam granice Windows datotečnog sustava"
+msgid ""
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
+msgstr ""
+"Za ispis na NetWare pisač, trebate navestiNetWare ime ispisnog poslužitelja "
+"(Primjetite da može biti različit odnjegovog TCP/IP imena računala!) kao i "
+"ime ispisnog reda za pisač kojimželite pristupiti, te neko primjenjivo "
+"korisničko ime i lozinku."
 
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Resizing"
-msgstr "Mijenjam veličinu"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Netmask:"
+msgstr "Netmaska"
 
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "partition %s"
-msgstr "particija %s"
+msgid "Append"
+msgstr "Dodaj na kraj"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Koliku veličinu želite zadržati za windowse"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr "Osvježi popis pisača (za prikaz svih dostupnih udaljenih CUPS pisača)"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"WARNING!\n"
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
 "\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
 msgstr ""
-"UPOZORENJE!\n"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
 "\n"
-"DrakX sada mora promijeniti veličinu vaše Windows particije\n"
-"Budite vrlo oprezni budući da je ova operacija\n"
-"izuzetno opasna. Ukoliko još niste mijenjali veličinu particije molim\n"
-"izađite prvo iz instalacije, pokrenite scandisk pod Windowsima (opcionalno "
-"pokrenite defrag), tada ponovno pokrenite instalaciju.\n"
-"Također preporučljivo je da sačuvate vaše podatke (napravite backup).\n"
-"Kada ste sigurni da želite nastaviti, pritisnite U redu."
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
 msgstr ""
-"Vaša Windows particija je prefragmentirana, molim pokrenite ``defrag'' prvo."
+"Auto instalacija može biti potpuno automatska ukoliko želite,\n"
+"u tom slučaju će preuzeti hard disk!!\n"
+"(ovo znači za instalaciju na drugo računalo).\n"
+"\n"
+"Možete preferirati da ponovite instalaciju.\n"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Iskoristi slobodan prostor na Windows particiji"
+msgid "Network printer \"%s\", port %s"
+msgstr "Mrežni pisač (TCP/socket)"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
 msgstr ""
-"Program koji mjenja veličinu FAT-a ne može rukovati vašom particijom, \n"
-"slijedeća greška se dogodila: %s"
+"Molimo odaberite koji mrežni adapter će biti povezan na vašu lokalnu mrežu."
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Kojoj particiji želite promijeniti veličinu?"
+msgid "OK to restore the other files."
+msgstr "U redu da bi povratili ostale datoteke"
 
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Iskoristi slobodan prostor na Windows particiji"
+msgid "Please choose your keyboard layout."
+msgstr "Molim, izaberite raspored tipkovnice."
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer Device URI"
+msgstr "URI Uređaja pisača"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not erasable media!"
+msgstr ""
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Terminal-based"
+msgstr "Terminal-zasnovano"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Installing a printing system in the %s security level"
+msgstr "Instaliram ispisni sustav s %s sigurnosnom razinom."
+
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgid "The user name is too long"
+msgstr "Ovaj korisnik već postoji"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (windows...)"
+msgstr "Drugi OS (Windows...)"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "WebDAV remote site already in sync!"
 msgstr ""
-"Nema FAT particije za mjenjanje veličine ili za korištenje loopback-a (ili "
-"nema dovoljno prostora)"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Swap partition size in MB: "
-msgstr "Veličina swap particiju u MB: "
+msgid "Reading printer database..."
+msgstr "Čitam bazu pisača ..."
 
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Root partition size in MB: "
-msgstr "Veličina korijenske particije u MB: "
+msgid "Generate auto install floppy"
+msgstr "Napravi auto instalacijsku disketu"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Choose the sizes"
-msgstr "Odaberite veličinu"
+msgid ""
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
+msgstr ""
+"\t\t korisničko ime: %s\n"
+"\t\t u putanju: %s \n"
 
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Koju particiju želite koristiti za Linux4Win?"
+msgid "Somalia"
+msgstr "Somalija"
 
-#: ../../install_interactive.pm:1
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "No open source driver"
+msgstr "X upravljački program"
+
+#: ../../security/level.pm:1
 #, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Koristi Windows particiju za loopback"
+msgid ""
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
+"Temeljeno na prijašnjoj razini, ali je sustav potpuno zatvoren.\n"
+"Sigurnosne značajke su na maksimumu."
 
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "There is no existing partition to use"
-msgstr "Nema postojećih particija koje bih mogao upotrijebiti"
+msgid "Nicaragua"
+msgstr "Nicaragua"
 
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use existing partitions"
-msgstr "Koristi postojeće particije"
+msgid "New Caledonia"
+msgstr "Nova Kaledonia"
 
-#: ../../install_interactive.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija"
+msgid "European protocol (EDSS1)"
+msgstr "Europski protokol (EDSS1)"
 
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Use free space"
-msgstr "Koristi slobodan prostor"
+msgid "Video mode"
+msgstr "Video mod"
 
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Please enter your email address below "
+msgstr "Upišite svoju lozinku"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Morate imati FAT particiju montiranu na /boot/efi"
+msgid "Oman"
+msgstr "Oman"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Network Monitoring"
+msgstr "Mrežne postavke"
+
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Swap particija ne postoji\n"
-"\n"
-"Da ipak nastavim?"
+msgid "SunOS"
+msgstr "SunOS"
 
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Morate imati root particiju.\n"
-"Prvo napravite particiju (ili kliknite na postojeću) te\n"
-"odaberite akciju ``Mjesto monitranja'' te odaberite `/'"
+msgid "New size in MB: "
+msgstr "Nova veličina u MB: "
 
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Neki hardware na vašem računalu treba ``vlasničke'' upravljačke programe\n"
-"kako bi proradio. Možete naći više informaciju o tome na: %s"
+msgid "Partition table type: %s\n"
+msgstr "Vrsta particijske tabele: %s\n"
 
-#: ../../install_messages.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Authentication Windows Domain"
+msgstr "LDAP Autentifikacija"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Čestitam, instalacija je kompletna.\n"
-"Uklonite boot medij i pritisnite return za ponovno podizanje.\n"
-"\n"
-"\n"
-"Za informacije o popravcima koji su raspoloživi za ovo izdanje Mandrake "
-"Linux-a,\n"
-"konzultirajte Eratu raspoloživu na\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Informacije o konfiguriranju vašeg sustava je raspoloživo u poslije\n"
-"instalacijskom poglavlju od Official Mandrake Linux User's Guide."
+msgid "US keyboard"
+msgstr "US tipkovnica"
 
-#: ../../install_messages.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Buttons emulation"
+msgstr "Emulacija gumbova"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakesoft.com/sales/contact"
+msgid ", network printer \"%s\", port %s"
+msgstr ", TCP/IP host \"%s\", port %s"
 
-#: ../../install_messages.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
 "\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
+"Drakbackup activities via tape:\n"
 "\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
 msgstr ""
-"\n"
-"Upozorenje\n"
-"\n"
-"Molimo pročitajte pažljivo činjenice niže. Ukoliko se ne slažete sa bilo\n"
-"kojim dijelom, nemate dozvolu instalirati slijedeći CD medij. Pritisnite "
-"'Odbij' \n"
-"za nastavak instalacije bez korištenja ovog medija.\n"
-"\n"
-"\n"
-"Neke komponente sadržane u slijedećem CD mediju nisu pokrivene\n"
-"GPL licencom ili sličnim ugovorom. Svaka takva komponenta je tada\n"
-"pokrivena stavkama i uvjetima svojim vlastitim specifičnim licencama. \n"
-"Molimo pročitajte pažljivo i složite se specifičnim licencama prije \n"
-"vašeg korištenja ili redistribuiranja navedenih komponenti. \n"
-"Takve licence općenito zabranjuju prijenos, dupliciranje \n"
-"(osim za spasonosne kopije), redistribuciju, reverzno inženjerstvo, \n"
-"disasembliranje, dekompilaciju ili promjenu komponente. \n"
-"Svako kršenje ugovora će odmah prekinuti vaša prava kod\n"
-"specifične licence. Ako vam stavke specifične licence ne odobre takva\n"
-"prava, obično ne možete instalirati programe na više od jednog\n"
-"sustava, ili prilagoditi ga za korištenje na mreži. Ako ste u nedoumici,\n"
-"kontaktirajte direktno distributera ili urednika komponente. \n"
-"Prijenos trećim osobama ili kopiranje takvih komponenti uključujući \n"
-"dokumentaciju je obično zabranjeno.\n"
-"\n"
-"\n"
-"Sva prava na komponente slijedećeg CD medija pripadaju njihovim \n"
-"uvaženim autorima i zaštićeni su intelektualnim vlasništvom i \n"
-"autorskim zakonima primjenjivim na software-ske programe.\n"
 
-#: ../../install_messages.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
 msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
 "\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
 msgstr ""
-"Uvod\n"
-"\n"
-"Operativni sustav i njegove različite komponente raspoložive u Mandrake "
-"Linux distribuciji \n"
-"će se zvati \"Software-ski Produkti\" daljnje u tekstu. Software-ski "
-"Produkti  uključuju, ali nisu \n"
-"ograničeni na, skup programa, metoda, zakona i dokumentacija vezanih uz "
-"operativni\n"
-"sustav i različite komponente Mandrake Linux distribucije.\n"
 "\n"
-"\n"
-"1. Licencni Dogovor\n"
-"\n"
-"Molimo pažljivo pročitajte ovaj dokument. Ovaj dokument je licenci dogovor "
-"između vas i \n"
-"MandrakeSoft S.A. koji se primjenjuje na Software-ske produkte.\n"
-"Instaliranjem, dupliciranjem ili korištenjem Software-skih Produkata u bilo "
-"kojem obliku,eksplicitno \n"
-"prihvaćate i potpuno se slažete da ćete prihvatiti stavke i uvjete ove "
-"Licence. \n"
-"Ukoliko se ne slažete sa bilo kojim dijelom licence, nije vam dozvoljeno "
-"instalirati, duplicirati ili koristiti \n"
-"Software-ski produkt. \n"
-"Svaki pokušaj instalacije, dupliciranja ili korištenja Software-skog "
-"Produkta u obliku kojem ne priliči \n"
-"sa stavkama i uvjetima ove licence je prazno i uništiti će vaša prava pod "
-"ovom\n"
-"Licencom. Uslijed uništenja licence, morate odmah unišititi sve kopije \n"
-"Software-skog Produkta.\n"
-"\n"
-"\n"
-"2. Ograničeno Jamstvo\n"
-"\n"
-"Software-ski Produkt i pripadajuća dokumentacija je pružena \"kako je\", bez "
-"jamstva, do \n"
-"mjere dozvoljene zakonom.\n"
-"MandrakeSoft S.A. neće, u bilo kojim slučajevima i do te mjere dozvoljene "
-"zakonom, biti odgovaran za bilo kakvu specijalnu,\n"
-"nesretnu, direktnu ili indirektnu štetu bilo kakvu (uključujući granice "
-"štete od gubitka\n"
-"posla, prestanka posla, financijskih gubitaka, legalnih plaćanja i kazni "
-"posljedica sudskih \n"
-"presuda, ili bilo kakvih drugih posljedica gubitka) što je posljedica "
-"korištenja ili nemogućnosti korištenja Software-skog \n"
-"Produkta, iako je MandrakeSoft S.A. bio upozoren od mogućnosti takve \n"
-"štete.\n"
-"\n"
-"OGRANIČENA ODGOVORNOST POVEZANA SA POSJEDOVANJEM ILI KORIŠTENJEM ZABRANJENOG "
-"SOFTWARE-A U NEKIM ZEMLJAMA\n"
-"\n"
-"Do granice dozvoljene zakonom, MandrakeSoft S.A. ili njegovi distributori "
-"neće, u bilo kakvim slučajevima, biti \n"
-"odgovaran za bilo kakvu specijalnu, nesretnu, direktnu ili indirektnu štetu "
-"bilo kako (uključujući \n"
-"ograničene štete zbog gubitka posla, prekida posla, financijskog gubitka, "
-"legalnih plaćanja \n"
-"i kazni posljedica sudskih presuda, ili bilo kakvih drugih "
-"posljedicagubitka) što je posljedica \n"
-"posjedovanja ili korištenja software-skih komponenti ili kao posljedica "
-"skidanja (download-a) software-skih komponenti \n"
-"sa jednog od Mandrake Linux site-ova koja su zabranjena ili ograničena u "
-"nekim zemljama po lokalnim zakonima.\n"
-"Ova ograničena odgovornost se primjenjuje na, ali nije ograničena, jake "
-"kriptografske komponente \n"
-"uključene u Software-ski Produkt.\n"
-"\n"
-"\n"
-"3. GPL Licenca i slične licence\n"
-"\n"
-"Software-ski Prodkt se sastoji od komponenti napravljenih od raznih ljudi "
-"ili entiteta.  Veliki \n"
-"broj tih komponenti je pokriveno pod stavkama i uvjetima GNU Opće Javne \n"
-"Licence, u daljnjem tekstu zvana \"GPL\", ili  sličnih licenci. Veliki broj "
-"tih licenci dozvoljava vam korištenje, \n"
-"dupliciranje, prilagođavanje ili redistribuciju komponenti koju ona pokriva. "
-"Molimo pročitajte pažljivo stavke \n"
-"i uvjete licencnog dogovora svake komponente prije korištenja bilo koje "
-"komponente. Bilo koje pitanje \n"
-"o licenci komponente trebao bi biti adresiran autoru komponente a ne "
-"MandrakeSoft-u.\n"
-"Programe razvijeni od strane MandrakeSoft S.A. su pokriveni GPL licencom. "
-"Dokumentacija napisana \n"
-"od strane MandrakeSoft S.A. je pokrivena specifičnom licencom. Molimo "
-"pogledajte dokumentaciju za \n"
-"više detalja.\n"
-"\n"
-"\n"
-"4. Prava na intelektualno vlasništvo\n"
-"\n"
-"Sva prava komponenti Software-skog Produkta pripada njihovim uvaženim "
-"autorima i \n"
-"zaštićeni su intelektualnim vlasništvom i autorskim zakonima primjenjivim na "
-"software-ske programe.\n"
-"MandrakeSoft S.A. zadržava svoje pravo za izmjenu ili prilagođavanje "
-"Software-skog Produkta, kao cijelinu ili u\n"
-"dijelovima, u svim slučajevima za sve namjene.\n"
-"\"Mandrake\", \"Mandrake Linux\" i pripadajući logoi su zaštićeni prodajni "
-"znaci MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Državni zakoni \n"
-"\n"
-"Ukoliko neki dio ovog dogovora govori ništa, ilegalan ili neprikladan "
-"sudstvu, taj \n"
-"dio može se isključiti iz ovog ugovora. Ali ostajete obveznu drugim "
-"primjenjivim sekcijama\n"
-"ugovora.\n"
-"Za stavke i uvjete ove Licence je nadležan zakon Francuske.\n"
-"Sve sporove oko stavaka licence će preferirano biti uređeno sudom. Kao "
-"zadnji \n"
-"izlaz, spor će biti predan odgovarajućem Sudu u Parizu - Francuska.\n"
-"Za bilo kakva pitanja o ovom dokumentu, molimo kontaktirajte MandrakeSoft S."
-"A.  \n"
+"(!) problem sa FTP vezom: nije bilo moguće poslati vaše pohranjene "
+"datotekeFTPom.\n"
 
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Pokrećem korak `%s'\n"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Sending Speed:"
+msgstr "Šaljem datoteke..."
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
 #: ../../standalone/harddrake2:1
 #, c-format
-msgid "Help"
-msgstr "Pomoć"
+msgid "Halt bug"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "not configured"
-msgstr "ponovno postavi"
+msgid "Mail alert configuration"
+msgstr "Postava upozorenja na poštu/SMS"
 
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Configure"
-msgstr "Podesi"
+msgid "Tokelau"
+msgstr "Tokelau"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Go on anyway?"
-msgstr "Da ipak nastavim?"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bosnian"
+msgstr "Estonska"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Pojavila se greška kod instalacije paketa:"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Release: "
+msgstr "Molim pričekajte"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "There was an error ordering packages:"
-msgstr "Javila se greška prilikom sortiranja paketa:"
+msgid "Connection speed"
+msgstr "Brzina"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
 msgstr ""
-"Promjenite vaš Cd-Rom!\n"
-"\n"
-"Ubacite Cd-Rom označen \"%s\" u vaš pogon i pritisnite U redu kada "
-"završite.\n"
-"Ukoliko ga nemate, pritisnite Odustani kako bi izbjegli instalaciju sa ovog "
-"Cd-Rom-a."
+"Upišite ime vašeg CD snimača\n"
+" ex: 0,1,0"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Refuse"
-msgstr "Odbij"
+msgid "Namibia"
+msgstr "Namibia"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../services.pm:1
 #, c-format
-msgid "Accept"
-msgstr "Prihvati"
+msgid "Database Server"
+msgstr "Poslužitelj baza podataka"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Installing package %s"
-msgstr "Instaliram paket %s"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid "%d packages"
-msgstr "%d paketa"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Ne mogu dodati particiju na _formatirani_ RAID md%d"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"Vaša video kartica može imati 3D ubrzanje samo sa XFree %s,\n"
+"UPOZORAVAMO VAS DA JE OVO EKSPERIMENTALNA PODRŠKA I MOŽE ZAMRZNUTI VAŠE "
+"RAČUNALO.Vaša kartica je podržana od XFree %s koja može imati bolju podršku "
+"u 2D."
+
+#: ../../standalone/draksec:1
 #, fuzzy, c-format
-msgid "No details"
-msgstr "Detalji"
+msgid "Please wait, setting security options..."
+msgstr "Molimo pričekajte, Pripremam instalaciju"
 
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Details"
-msgstr "Detalji"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Molimo pričekajte, Pripremam instalaciju"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Pokreni X-Window sustav pri podizanju"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Time remaining "
-msgstr "Preostalo vrijeme"
+msgid "hourly"
+msgstr "svaki sat"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Estimating"
-msgstr "Procjenjujem"
+msgid "          Successfuly Restored on %s       "
+msgstr "          Uspješno povraćeni na %s          "
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Installing"
-msgstr "Instaliram"
+msgid "Making printer port available for CUPS..."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose the packages you want to install"
-msgstr "Odaberite pakete koje želite instalirati"
+msgid "Antigua and Barbuda"
+msgstr "Antigua i Barbuda"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Minimal install"
-msgstr "Minimalna instalacija"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Updating package selection"
-msgstr "Dograđujem izbor paketa"
+msgid "Spanish"
+msgstr "Španjolska"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Load/Save on floppy"
-msgstr "Učitaj/Spremi na disketu"
+msgid "Start"
+msgstr "Pokretanje"
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "<- Previous"
-msgstr "<- Prijašnje"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Install"
-msgstr "Instaliraj"
+msgid "Configuring applications..."
+msgstr "Podešavam aplikacije..."
 
-#: ../../install_steps_gtk.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Show automatically selected packages"
-msgstr "Prikaži automatski odabrane pakete"
+msgid "Normal modem connection"
+msgstr "Normalna modemska veza"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ne možete odznačiti ovaj paket budući da ga treba nadograditi"
+msgid "File Selection"
+msgstr "Odabir datoteka"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+"  tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+"  standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
 msgstr ""
-"Ovaj paket treba nadograditi\n"
-"Da li ste sigurni da ga želite odznačiti?"
+"Koju ISDN konfiguraciju preferirate?\n"
+"\n"
+"* Stara konfiguracija koristi isdn4net. Ona sadrži snažne\n"
+"  alate, ali je teška za konfiguriranje, nije standardna.\n"
+"\n"
+"* Nova konfiguracija je lakša za razumiti, mnogo standardnija,\n"
+"  ali sa manje alata.\n"
+"\n"
+"Preporučamo laku konfiguraciju.\n"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
 #, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Ne možete odznačiti ovaj paket budući da je već instaliran"
+msgid "CUPS"
+msgstr "CUPS"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Budući da je ovo obvezni paket ne možete ga odznačiti"
+msgid "Run config tool"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "You can't select/unselect this package"
-msgstr "Ne možete označiti/odznačiti ovaj paket"
+msgid "Bootloader installation"
+msgstr "Bootloader instalacija"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "The following packages are going to be removed"
-msgstr "Slijedeći paketi će biti uklonjeni"
+msgid "Root partition size in MB: "
+msgstr "Veličina korijenske particije u MB: "
 
 #: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "The following packages are going to be installed"
-msgstr "Slijedeći paketi će biti instalirani"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Budući da je ovo obvezni paket ne možete ga odznačiti"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"You can't select this package as there is not enough space left to install it"
+msgid "Etherboot ISO image is %s"
 msgstr ""
-"Ne možete označiti ovaj paket budući da nema dovoljno mjesta gdje ga se može "
-"instalirati"
 
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Značaj: %s\n"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Veličina: %d KB\n"
-
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Version: %s\n"
-msgstr "Inačica: %s\n"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) je Domain Name Server (DNS) poslužitelj koji se upotrebljava\n"
+"za razlučivanje imena računala u IP adrese."
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Name: %s\n"
-msgstr "Ime: %s\n"
+msgid "Disconnect..."
+msgstr "Odspoji..."
 
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Bad package"
-msgstr "Loš paket"
+msgid "Saint Lucia"
+msgstr "Sveta Lucija"
 
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Other"
-msgstr "Ostali"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Report"
+msgstr "port"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ukupna veličina: %d / %d MB"
+msgid "Palau"
+msgstr "Palau"
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Next ->"
-msgstr "Slijedeće ->"
+msgid "level"
+msgstr "razina"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, c-format
-msgid "Individual package selection"
-msgstr "Individualan odabir paketa"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
 
 #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Package Group Selection"
 msgstr "Odabir grupe paketa"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+msgid "Restore Via Network Protocol: %s"
 msgstr ""
-"Vaš sustav je slab na resursima. Možete imati nekih problem prilikom\n"
-"instalacije Mandrake Linux-a. Ukoliko se to desi, možete probati tekstualnu\n"
-"instalaciju. Za to, pritisnite `F1' kada podižete CDROM, i unesite `text'."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Save packages selection"
-msgstr "Spremi odabir paketa"
+msgid "You can configure each parameter of the module here."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Automated"
-msgstr "Automatski"
+msgid "Choose the resolution and the color depth"
+msgstr "Odaberite rezoluciju  i color depth"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/mousedrake:1
 #, c-format
-msgid "Replay"
-msgstr "Ponovno prikaži"
+msgid "Emulate third button?"
+msgstr "Emuliranje treće tipke?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
 msgstr ""
-"Auto instalacija može biti potpuno automatska ukoliko želite,\n"
-"u tom slučaju će preuzeti hard disk!!\n"
-"(ovo znači za instalaciju na drugo računalo).\n"
-"\n"
-"Možete preferirati da ponovite instalaciju.\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Generate auto install floppy"
-msgstr "Napravi auto instalacijsku disketu"
+msgid "Mount"
+msgstr "Montiraj"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakautoinst:1
 #, fuzzy, c-format
-msgid "Reboot"
-msgstr "Root"
+msgid "Creating auto install floppy"
+msgstr "Pravim auto instalacijsku disketu"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Install updates"
+msgstr "Instaliraj dogradnje sustava"
+
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
+msgid "text box height"
 msgstr ""
-"Niste završili sve korake.\n"
-"\n"
-"Želite li zaista završiti?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Creating auto install floppy..."
-msgstr "Pravim auto instalacijsku disketu"
+msgid "State"
+msgstr "Stanje"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Umetnite praznu disketu u pogon %s"
+msgid "Be sure a media is present for the device %s"
+msgstr "Uvjerite se da je medij\tprisutan za uređaj %s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Trebati ćete promjeniti vaš Otvoreni Firmware boot-uređaj kako bi\n"
-" omogućili bootloader. Ukoliko ne želite vidjeti bootloader prompt pri\n"
-" podizanju, pritisnite Command-Option-O-F pri podizanju i unesite:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Tada napišite: shut-down\n"
-"Pri slijedećem podizanju trebali biste vidjeti prompt bootloadera."
+msgid "Enable multiple profiles"
+msgstr "Omogući više obrazaca"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Installation of bootloader failed. The following error occured:"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
 msgstr ""
-"Instalacija bootloader-a nije uspjela. Prijavljena je slijedeća grešska:"
+"Ove opcije mogu pohraniti i povratiti sve datoteke u vašoj /etc mapi.\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Installing bootloader"
-msgstr "Instaliranje bootloadera"
+msgid "Local printer"
+msgstr "Lokalni pisač"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+msgid "Files Restored..."
 msgstr ""
-"Greška prilikom instalacije aboot-a, \n"
-"probati nasilno instalirati iako to može uništiti prvu particiju?"
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Do you want to use aboot?"
-msgstr "Da li želite koristiti aboot?"
+msgid "Package selection"
+msgstr "Odabir paketa"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Mauritania"
+msgstr "Mauritania"
+
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
 msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t      \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
 msgstr ""
-"Čini se da imate OldWorld ili Nepoznato\n"
-" računalo, yaboot bootloader neće moći raditi kod vas.\n"
-"Instalacija će nastaviti, ali ćete morati\n"
-" koristiti BootX da podignete vaše računalo"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Pripremam bootloader"
+"Mogu zadržati vaše trenutne postavke i pretpostaviti da ste već "
+"postaviliDHCP poslužitelj; u tom slučaju molim provjerite da li sam točno "
+"pročitaoC-Class mrežu koju koristite za vašu lokalnu mrežu; neću je "
+"ponovnokonfigurirati niti dirati postavke vašeg DHCP poslužitelja.\n"
+"\n"
+"Inače, mogu vam rekonfigurirati vaše sučelje i (re)konfiguriratiDHCP "
+"poslužitelj.\n"
+"\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Domain Admin Password"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
 msgstr ""
+"Nije pronađen nijedan lokalni pisač! Za ručno instaliranje pisača upišiteime "
+"uređaja/datoteke u liniju za unos (paralelni portovi:/dev/lp0, /dev/lp1, ...,"
+"odgovara LPT1:, LPT2:, ..., prvi USB pisač: /dev/usb/lp0, drugi USB pisač:/"
+"dev/usb/lp1, ...)."
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Domain Admin User Name"
-msgstr "Ime domene"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Windows Domain"
-msgstr "Dobavi Windows fontove"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Authentication Windows Domain"
-msgstr "LDAP Autentifikacija"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "All primary partitions are used"
+msgstr "Sve primarne particije su iskorištene"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
 msgstr ""
+"Nakon što je to napravljeno, preporučamo da ponovno pokrenete vaše X\n"
+"okružje kako bi izbjegli probleme prilikom promjene imena računala."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "NIS Server"
-msgstr "NIS Poslužitelj"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Automatska detekcija i konfiguracija hardware-a pri podizanju."
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS domena"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation Server Configuration"
+msgstr "Napredne postavke"
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Authentication NIS"
-msgstr "NIS Autentifikacija"
+msgid "Configuring IDE"
+msgstr "Podešavam IDE"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Network functionality not configured"
+msgstr "Mreža nije podešena"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "LDAP Server"
-msgstr "LDAP Poslužitelj"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Configure module"
+msgstr "Podesi miš"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
+msgid "Cocos (Keeling) Islands"
+msgstr "Cocos (Keeling) Otočje"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnecting from the Internet "
+msgstr "Spoji se na Internet"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Authentication LDAP"
-msgstr "LDAP Autentifikacija"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Trebate ponovo pokrenuti sustav prije nego promjene postanu aktivne"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "Provider phone number"
+msgstr "Telef. broj pružatelja"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Host %s"
+msgstr "Ime računala"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Local files"
-msgstr "Lokalne datoteke"
+msgid "Armenia"
+msgstr "Armenija"
 
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Authentication"
-msgstr "Provjera autentičnosti"
+msgid "Fiji"
+msgstr "Fiji"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "This password is too short (it must be at least %d characters long)"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
 msgstr ""
-"Ova lozinka je prejednostavna (lozinka mora sadržavati barem %d znakova)"
 
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "No password"
-msgstr "Bez lozinke"
+msgid "Second floppy drive"
+msgstr "Drugi disketni pogon"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Set root password"
-msgstr "Podešavanje root lozinke"
+msgid "About Harddrake"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "You have not configured X. Are you sure you really want this?"
+msgid "Drive capacity"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servisi: %d aktiviran za %d registriran"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"Umetnite disketu u pogon\n"
+"Svi podaci na disketi biti će izbrisani"
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Services"
-msgstr "Servisi"
+msgid "Size: %s"
+msgstr "Veličina: %s"
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "System"
-msgstr "Sustav"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "Port"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Bootloader"
-msgstr "Koristiti Bootloader"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Boot"
-msgstr "Root"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "disabled"
-msgstr "onemogući"
+msgid "Control and Shift keys simultaneously"
+msgstr "Control i Shift tipke istodobno"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "activated"
-msgstr "Aktiviraj sada"
+msgid "secondary"
+msgstr "%d sekundi"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Firewall"
-msgstr "Vatrozid/Ruter"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "View Backup Configuration."
+msgstr "Pogledaj postavke sigurnosne pohrane"
 
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Security"
-msgstr "Sigurnost"
+msgid "if set to yes, report check result to syslog."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Security Level"
-msgstr "Sigurnosna razina"
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No password"
+msgstr "Bez lozinke"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Network"
-msgstr "Mreža"
+msgid "Nigeria"
+msgstr "Nigeria"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "Mrežni međusklop"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "There is no existing partition to use"
+msgstr "Nema postojećih particija koje bih mogao upotrijebiti"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "X kod pokretanja sustava"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "Kopiraj fontove na vaš sustav"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Hardware"
-msgstr "na tvrdi disk"
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Za ispis na TCP ili socket pisač, trebate navestiime poslužitelja pisača te "
+"opciono broj porta. Na HP JetDirect poslužiteljimabroj porta je obično 9100, "
+"na drugim poslužiteljima može biti drugačije.Pogledajte priručnik vašeg "
+"hardvera."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "TV card"
-msgstr "TV kartica"
+msgid "Hard drive information"
+msgstr "Hard disk informacije"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Nije pronađena zvučna kartica. Probajte \"harddrake\" poslije instalacije"
+msgid "Russian"
+msgstr "Ruska"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Pokrenite \"sndconfig\" poslije instalacije za podešavanje vaše zvučne "
-"kartice"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Jordan"
+msgstr "Jordan"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Da li imate ISA zvučnu karticu?"
+msgid "Hide files"
+msgstr "Sakrij datoteku"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Auto-detect printers connected to this machine"
+msgstr "Automatski prepoznaj pisač"
+
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Sound card"
-msgstr "Zvučna kartica"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Remote CUPS server"
-msgstr "Udaljeni CUPS poslužitelj"
+msgid "Sorry, no floppy drive available"
+msgstr "Žalim, međutim disketni pogon nije dostupan"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No printer"
-msgstr "Nema pisača"
+msgid "Bolivia"
+msgstr "Bolivija"
 
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printer"
-msgstr "Pisac"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Namjestite vaš Windows poslužitelj da omogućuje pristup pisaču preko "
+"IPPprotokola i namjestite ispis s ovog računala sa \"%s\" tipom veze u "
+"Printerdrakeu.\n"
+"\n"
 
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Mouse"
-msgstr "Miš"
+msgid "Bad package"
+msgstr "Loš paket"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Timezone"
-msgstr "Vremenska zona"
+#: ../../share/advertising/07-server.pl:1
+#, fuzzy, c-format
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Učinite od svog računala moćni poslužitelj sa samo nekoliko pritisaka na "
+"mišu:Web poslužitelj, email, vatrozid, router, datotečni i ispisni "
+"poslužitelj, ..."
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
-#, c-format
-msgid "Keyboard"
-msgstr "Tipkovnica"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "DrakSec Basic Options"
+msgstr "Opcije"
 
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../standalone/draksound:1
 #, c-format
-msgid "Summary"
-msgstr "Sumarno"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program.  Just type \"sndconfig\" in a console."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "NTP Server"
-msgstr "NTP Poslužitelj"
+msgid "Romania"
+msgstr "Rumunjska"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatska vremenska sinkronizacija (koristeći NTP)"
+msgid "choose device"
+msgstr "Izaberite uređaj"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Vaš hardverski sat namješten je na GMT"
+msgid "Canada"
+msgstr "Kanada"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Which is your timezone?"
-msgstr "Koja je vaša vremenska zona?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "Da li želite podesiti ispisivanje?"
+msgid "Remove from LVM"
+msgstr "Ukloni sa LVM-a"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Ne mogu napraviti fork: %s"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Timezone"
+msgstr "Vremenska zona"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Spajam se na mirror kako bih pribavio popis dostupnih paketa"
+msgid "German"
+msgstr "Njemačka"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Izaberite mirror sa kojeg želite skinuti pakete"
+msgid "Next ->"
+msgstr "Slijedeće ->"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
 msgstr ""
-"Kontaktiram Mandrake Linux web site za dobivanje popisa raspoloživih mirrora"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
 msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
 "\n"
-"Do you want to install the updates ?"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
 msgstr ""
-"Imate mogućnost skidanja (downloada) paketa za dogradnju koji su\n"
-"izašli poslije nego što je distribucija postala raspoloživa.\n"
-"\n"
-"Dobit ćete sigurnosne popravke i popravke od grešaka, ali za nastavak\n"
-"trebate imati podešenu Internet vezu.\n"
 "\n"
-"Da li želite instalirati dogradnju?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Molim, umetnite Update Modules disketu u pogon %s"
+"Šanse su, da je ova particija\n"
+"ustvari particija upravljačkog programa, vjerojatno\n"
+"biste ju trebali ostaviti.\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Molim, umetnite Boot disketu u pogon %s"
+msgid "Guinea-Bissau"
+msgstr "Gvineja-Bisau"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Post-install configuration"
-msgstr "Postava nakon instalacije"
+msgid "Horizontal refresh rate"
+msgstr "Horizontalna vrijednost osvježavanja"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Installing package %s\n"
-"%d%%"
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
 msgstr ""
-"Instaliram paket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing installation"
-msgstr "Pripremam instalaciju"
+"Ne mogu maknuti točku za montiranje zato što se ova particija koristi za "
+"loop back.\n"
+"Uklonite loopback prvo"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom naslovljen \"%s\""
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
+"Postava mreže napravljena tijekom instalacije se ne može sada pokrenuti."
+"Provjerite da li je mreža dostupna poslije pokretanja sustava i "
+"ispravitepostavke korištenjem Mandrake kontrolnog centra, odjeljak \"Mreža i "
+"Internet\"/\"Veza\", i poslije podesite pisač, također iz Mandrake "
+"kontrolnog centra,odjeljak \"Hardver\"/\"Pisač\""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+msgid "USB controllers"
 msgstr ""
-"Ako imate sve dolje navedene CDove kliknite U redu.\n"
-"Ako nemate niti jedan od navedenih CD kliknite Odustani.\n"
-"Ako imate samo neke od dolje navedenih CDa odznačite one koje nemate i "
-"kliknite U redu."
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../Xconfig/various.pm:1
+#, fuzzy, c-format
+msgid "What norm is your TV using?"
+msgstr "Kakav tip ISDN veze koristite ?"
+
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "All"
-msgstr "Sve"
+msgid "Type:"
+msgstr "Tip:"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Stvarno malena instalacija (posebice bez urpmia)"
+msgid "Share name"
+msgstr "Ime sharea"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Sa osnovnom dokumentacijom (preporučeno!)"
+msgid "enable"
+msgstr "omogući"
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "With X"
-msgstr "Sa X-ima"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr ""
+"Kontaktiram Mandrake Linux web site za dobivanje popisa raspoloživih mirrora"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
 msgstr ""
-"Niste izabrali niti jednu grupu paketa\n"
-"Izaberite minimalnu instalaciju ako želite"
+"Problem se pojavio prilikom ponovnog pokretanja mreže: \n"
+"\n"
+"%s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Type of install"
-msgstr "Tip instalacije"
+msgid "Remove the loopback file?"
+msgstr "Ukloniti loopback datoteku?"
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Selected size is larger than available space"
 msgstr "Izabrana veličina je veća nego raspoloživ prostor"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Umetnite disketu koja sadržava izbor paketa"
+msgid "NCP server name missing!"
+msgstr "Ime NCP poslužitelja nedostaje!"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Loading from floppy"
-msgstr "Učitavam sa diskete"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose your country."
+msgstr "Molim izaberite koju vrstu miša koristite."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Package selection"
-msgstr "Odabir paketa"
+msgid "Hard Disk Backup files..."
+msgstr "Sigurnosna pohrana datoteka na tvrdom disku..."
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Save on floppy"
-msgstr "Spremi na disketu"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Laotian"
+msgstr "Latvija"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Load from floppy"
-msgstr "Učitaj sa diskete"
+msgid "Samoa"
+msgstr "Samoa"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
 msgstr ""
-"Molimo izaberite učitivanje ili spremanje izbora paketa na disketu.\n"
-"Format je isto kao auto_install napravljene diskete."
+"Rstat protokol omogućava korisnicima na mreži da dohvate\n"
+"mjerljive performanse za svako računalo koje je na mreži."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+msgid "Re-generating list of configured scanners ..."
 msgstr ""
-"Vaš sustav nema dovoljno prostora za instalaciju ili dogradnju (%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Tražim dostupne pakete"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Tražim pakete koje mogu nadograditi"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "Looking at packages already installed..."
-msgstr "Ne možete odznačiti ovaj paket budući da je već instaliran"
+msgid "Scanner"
+msgstr "Odaberite skener"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/test.pm:1
 #, fuzzy, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Tražim dostupne pakete"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Nema dovoljno swapa za završetak instalacije, molim dodajte još"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Upozorenje: testiranje grafičke kartice može zamrzunti vaše računalo"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
-msgstr ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "Korisničko ime može sadržavati samo mala slova, brojeve, `-' i `_'"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Check bad blocks?"
-msgstr "Provjeri za loše blokove?"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Menudrake"
+msgstr "MandrakeStore"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Izaberite particije koje želite formatirati"
+msgid "Welcome To Crackers"
+msgstr "Dobrodošli Crackeri"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Morate ponovo pokrenuti sustav kako bi se aktivirala promjena particijske "
-"tablice"
+msgid "Module options:"
+msgstr "Postavke modula:"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+msgid "Secure your networks with the Multi Network Firewall"
 msgstr ""
-"Nema slobodnog mjesta za 1 MB bootstrap! Instalacija će nastaviti, ali za "
-"podizanje vašeg sustava, trebati ćete napraviti bootstrap particiju u "
-"DiskDrake-u"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "Odaberite mjesta montiranja"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Tražim particije kako bi pronašao mjesta montiranja"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No partition available"
-msgstr "nema dostupnih particija"
+msgid "Go on without configuring the network"
+msgstr "Nastavi bez podešavanja mreže"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Configuring IDE"
-msgstr "Podešavam IDE"
+msgid "Abort"
+msgstr "Prekini"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "No password prompt on %s at port %s"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Podešavam PCMCIA kartice..."
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Naznačite da li prethodno želite obrisati vaš CDRW"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "Koristi slobodan prostor"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Button 3 Emulation"
-msgstr "Emulacija 3 gumba"
+msgid "\t-CDROM.\n"
+msgstr "\t-CDROM.\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Button 2 Emulation"
-msgstr "Emulacija 2 gumba"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Vaša Windows particija je prefragmentirana, molim pokrenite ``defrag'' prvo."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Buttons emulation"
-msgstr "Emulacija gumbova"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Norveška)"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Izaberite na kojem serijskom portu je miš priključen."
+msgid "Hard Disk Backup Progress..."
+msgstr "Progres sigurnosne pohrane tvrdog diska"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Mouse Port"
-msgstr "Port miša"
+msgid "Unable to fork: %s"
+msgstr "Ne mogu napraviti fork: %s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please choose your type of mouse."
-msgstr "Molim izaberite vašu vrstu miša."
+msgid "Type: "
+msgstr "Vrsta: "
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Enkripcijski ključ"
+msgid "<-- Edit Client"
+msgstr "DHCP klijent"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Upgrade %s"
-msgstr "Dogradnja"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "no fonts found"
+msgstr "nisu pronađeni fontovi"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Da li je ovo instalacija ili nadogradnja?"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Mouse"
+msgstr "Miš"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "Instaliraj/Nadogradi"
+#: ../../bootloader.pm:1
+#, c-format
+msgid "not enough room in /boot"
+msgstr "nema dovoljno mjesta u /boot"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Ovdje je cijeli popis raspoloživih tipkovnica"
+msgid "Choosing an arbitratry driver"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Molim, izaberite raspored tipkovnice."
+msgid "Host name"
+msgstr "Ime računala"
 
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Quit"
-msgstr "Završi"
+msgid "Liechtenstein"
+msgstr "Linhenštajn"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "License agreement"
-msgstr "Licencni dogovor"
+msgid "the color of the progress bar"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "An error occurred"
-msgstr "Pojavila se greška"
+msgid "Suppress Fonts Files"
+msgstr "Potisni datoteke fontova"
 
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
+msgid "Add to RAID"
+msgstr "Dodaj RAID-u"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
 msgstr ""
-"  <Tab>/<Alt-Tab> između elemenata  | <Space> bira | <F12> slijedeći zaslon"
+"Možete dodati dodatne unose za yaboot, ili za drugi operativni sustav,\n"
+"alternativne kernele, ili za spasonosnu boot sliku.\n"
+"\n"
+"Za druge OS-ove - unos se sastoji samo od labele i \"root\" particije.\n"
+"\n"
+"Za Linux, postoji nekoliko mogućih opcija: \n"
+"\n"
+" * Labela: Jednostavno, ovo je ime koje ćete napisati u yaboot promptu za\n"
+"odabir ove boot opcije.\n"
+"\n"
+" * Slika: Ovo je ime kernela koji se podiže. Tipično vmlinux ili\n"
+"varijacija vmlinux-a sa ekstenzijom;\n"
+"\n"
+" * Root: \"root\" uređaj ili '/' za vašu Linux instalaciju.\n"
+"\n"
+" * Dodatak: Na Apple hardware-u, kernel dodatak opcija se koristi vrlo često "
+"za\n"
+"pomoć pri inicijaliziranju video hardware-a, ili za omogućavanje emulacije\n"
+"tipaka na mišu tipkovnicom zbog čestog nedostatka 2-og ili 3-eg tipke na "
+"Apple\n"
+" miševima. Neki primjeri:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
+"\n"
+" * Initrd: Ova opcija se može koristiti ili za učitavanje inicijalnih\n"
+"modula, prije nego što je boot\n"
+"uređaj raspoloživ, ili za učitavanje ramdisk slike za spasonosne boot "
+"situacije.\n"
+"\n"
+" * Initrd-veličina: Podrazumijevana veličina ramdisk-a je općenito 4096\n"
+"byte-ova. Ukoliko trebate alocirati veći ramdisk, ova opcija može biti "
+"korištena.\n"
+"\n"
+" * Čitaj-Piši: Normalno je \"root\" particija inicijalno podignuta u čitaj-"
+"samo,\n"
+"radi mogućnosti provjere datotečnog sustava prije nego sustav postane "
+"'živ'.\n"
+"Možete premostiti tu opciju ovdje.\n"
+"\n"
+" * NoVideo: Ako se Apple hardware pokaže kao iznimno problematičan, možete\n"
+"izabrati ovu opciju za podizanje u 'novideo' modu, sa native framebuffer "
+"podrškom.\n"
+"\n"
+" * Podrazumijevano: Izabire ovaj unos kao podrazumijevani Linux izbor,\n"
+"moguće izbirati pritiskom ENTER-a na yaboot pitanju. Ovaj unos će također\n"
+"biti označen sa '*', ukoliko stisnete [Tab] za pregledavanje boot izbora."
 
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux instalacija %s"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr "Pisač \"%s\" je uspješno dodan StarOfficeu/OpenOffice.org/GIMPu."
 
-#: ../../install_steps.pm:1
-#, c-format
-msgid "No floppy drive available"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No floppy drive available!"
 msgstr "Disketni pogon nije dostupan"
 
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Welcome to %s"
-msgstr "Dobrodošli u %s"
-
-#: ../../install_steps.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
 msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
 msgstr ""
-"Neki važni paketi nisu se instalirali pravilno.\n"
-"Ili je vaš cdrom pogon ili cd medij u defektu.\n"
-"Provjerite cdrom na instaliranom računalu koristeći \"rpm -qpl Mandrake/RPMS/"
-"*.rpm\"\n"
+"Da bi saznali o dostupnim opcijama za trenutni pisač pročitajte ili "
+"popisprikazan dolje ili stisnite na \"Popis ispisnih opcija\".%s\n"
 
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dupliciraj mjesto monitranja %s"
+msgid "Continue anyway?"
+msgstr "Da ipak nastavim?"
 
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
 msgstr ""
-"Dogodila se greška, ali neznam kako s njom lijepo rukovati.\n"
-"Nastavite dalje na vlastiti rizik."
+"Ako vaš pisač nije prikazan, izaberite kombatibilni (pogledajte priručnik "
+"odpisača) ili neki slični."
 
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please wait"
-msgstr "Molim pričekajte"
+msgid "Printer"
+msgstr "Pisac"
 
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Ok"
-msgstr "U redu"
+msgid "Saudi Arabia"
+msgstr "Saudijska Arabija"
 
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Finish"
-msgstr "Završi"
+msgid "Internet"
+msgstr "Internet"
 
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "Basic"
-msgstr "Osnovno"
+msgid "Some devices were added:\n"
+msgstr ""
 
-#: ../../interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Advanced"
-msgstr "Napredno"
-
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#, fuzzy, c-format
-msgid "Remove"
-msgstr "Popis za uklanjanje"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Modify"
-msgstr "Promjeni"
+msgid "Printing on the printer \"%s\""
+msgstr "Ispis na pisaču \"%s\""
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Add"
-msgstr "Dodaj"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
 
-#: ../../interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From Tape"
+msgstr "Vrati particijsku tabelu"
+
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Choose a file"
-msgstr "Izaberite datoteku"
+msgid "Choose the profile to configure"
+msgstr "Izaberite profil za konfiguriranje"
 
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
 msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
 msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Desna \"Windows\" tipka"
-
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Left \"Windows\" key"
-msgstr "Lijeva \"Windows\" tipka"
+msgid "Backup Now from configuration file"
+msgstr "Pohrani iz datoteke sa postavkama"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "\"Menu\" tipka"
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Ime pisača može sadržavati samo slova, brojeve i podvlaku"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt i Shift tipku istodobno"
+msgid "Restarting printing system..."
+msgstr "Ponovno pokrećem ispisni sutav ..."
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl i Alt tipke istodobno"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "CapsLock key"
-msgstr "CapsLock tipka"
+msgid "See hardware info"
+msgstr "Pokaži info o hardveru"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Control i Shift tipke istodobno"
+msgid "First sector of boot partition"
+msgstr "Prvi sektor boot particije"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Obe Shift tipke istodobno"
+msgid "Printer manufacturer, model"
+msgstr "Proizvođač pisača, model"
 
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Right Alt key"
-msgstr "Desna Alt tipka"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Ispiši, Bez Reda"
 
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavenska (latinična)"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable         : enable MTS\n"
+"--disable        : disable MTS\n"
+"--start          : start MTS\n"
+"--stop           : stop MTS\n"
+"--adduser        : add an existing system user to MTS (requires username)\n"
+"--deluser        : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient      : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient      : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vijetnamska \"numeric row\" QWERTY"
+msgid "Subnet Mask:"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "US keyboard (international)"
-msgstr "US keyboard (internacionalna)"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "US keyboard"
-msgstr "US tipkovnica"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Dva kritična parametra su vertikalna vrijednost osvježavanja, koja je "
+"vrijednost\n"
+"u kojoj se cijeli zaslon osvježava, i najvažnije horizontalna\n"
+"vrijednost osvježavanja koja ja vrijednost u kojoj se svaka linija "
+"prikazuje.\n"
+"\n"
+"JAKO JE VAŽNO da ne specifirate tip monitora kod kojega je raspon "
+"osvježavanja\n"
+"veći od mogućnosti vašeg monitora jer možete oštetiti vaš monitor.\n"
+" Ukoliko ste u nedoumici, izaberite konzervativne postavke."
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
 #, c-format
-msgid "UK keyboard"
-msgstr "UK tipkovnica"
+msgid "Modify"
+msgstr "Promjeni"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Ukrainian"
-msgstr "Ukrajinska"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"\"%s\" i \"%s\" naredbe vam također omogućuju da podesite opcije za "
+"određeniposao ispisa. Jednostavno dodajte željene postavke u komandnu "
+"liniju, npr.\"%s <datoteka>\".\n"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turska (moderna  \"Q\" model)"
+msgid "Need hostname, username and password!"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turska (tradicionalni \"F\" model)"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Tajik keyboard"
-msgstr "Tajik tipkovnica"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "HardDrake"
+msgstr "na tvrdi disk"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Thai keyboard"
-msgstr "Tajlandska tipkovnica"
+msgid "new"
+msgstr "novi"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Armenska (pisaća mašina)"
+msgid "Would you like to try again?"
+msgstr "Da li želite podesiti ispisivanje?"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Wizard"
+msgstr "Čarobnjak"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamil (TSCII)"
+msgid "Edit selected server"
+msgstr "detektirano %s"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Srpska (čirilica)"
+msgid "Please choose where you want to backup"
+msgstr "Izaberite gdje želite pohranjivati"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovačka (QWERTY)"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"Morate ponovo pokrenuti sustav kako bi se aktivirala promjena particijske "
+"tablice"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovačka (QWERTZ)"
+msgid "Do not include the browser cache"
+msgstr "Izostavi cache preglednika (browsera)"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid "Slovenian"
-msgstr "Slovenska"
+msgid "Please, choose your keyboard layout."
+msgstr "Molim izaberite raspored tipkovnice."
 
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
 #, c-format
-msgid "Swedish"
-msgstr "Švedska"
+msgid "Standard"
+msgstr "Standardno"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
 #, c-format
-msgid "Russian (Yawerty)"
-msgstr "Ruska (Yawerty)"
+msgid "Please choose your mouse type."
+msgstr "Molim izaberite koju vrstu miša koristite."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Russian"
-msgstr "Ruska"
+msgid "Connect..."
+msgstr "Poveži..."
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Rumunjska (qwerty)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Podešavam pisač \"%s\" ..."
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Rumunjska (qwertz)"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "not configured"
+msgstr "ponovno postavi"
 
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Canadian (Quebec)"
-msgstr "Kanadska (Quebec)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Portuguese"
-msgstr "Portugalska"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "About"
+msgstr "Prekini"
 
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Poljska (qwertz raspored)"
+msgid "Proxies configuration"
+msgstr "Postava proxy-a"
 
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Poljska (qwerty raspored)"
+msgid "GlidePoint"
+msgstr "GlidePoint"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Norwegian"
-msgstr "Norveška"
+msgid "Start: sector %s\n"
+msgstr "Početak: sektor %s\n"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Dutch"
-msgstr "Nizozemska"
+msgid "Network interface already configured"
+msgstr "Mrežno sučelje već podešeno"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Maltese (US)"
+msgid "Couldn't access the floppy!"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Maltese (UK)"
+msgid "connecting to Bugzilla wizard ..."
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
 #, fuzzy, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Srpska (čirilica)"
+msgid "Mail Server"
+msgstr "Poslužitelj baza podataka"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Myanmar (Burmese)"
-msgstr ""
+msgid "Please click on a partition"
+msgstr "Molim kliknite na particiju"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Macedonian"
-msgstr "Makedonska"
+msgid "Linux"
+msgstr "Linux"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Malayalam"
+msgid "Have a nice day!"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Latvian"
-msgstr "Latvija"
+msgid "across Network"
+msgstr "preko mreže"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituanska \"fonetska\" QWERTY"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituanska \"number row\" QWERTY"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Upgrade %s"
+msgstr "Dogradnja"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituanska AZERTY (nova)"
+msgid "Select Printer Connection"
+msgstr "Odaberite vezu pisača"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituanska AZERTY (stara)"
+msgid "Scanning for TV channels in progress ..."
+msgstr "Pretraživanje TV kanala u tijeku ..."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Laotian"
-msgstr "Latvija"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"Greška tijekom slanja datoteke putem FTPa.\n"
+" Ispravite svoje FTP postavke."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Latin American"
-msgstr "Latino američka"
+msgid "IP Range Start:"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Korean keyboard"
-msgstr "Korejska tipkovnica"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Internet superserver demon (najčešće zvan inetd) pokreće \n"
+"razne druge internet servise po potrebi. Odgovoran je za pokretanje \n"
+"mnogo servisa, uključujući telnet, ftp, rsh, i rlogin. Isključivanje inetd-"
+"a\n"
+"onemogučuje sve servise za koje je zadužen."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Japanese 106 keys"
-msgstr "Japanska (106 tipaka)"
+msgid "the height of the progress bar"
+msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Inuktitut"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
 msgstr ""
+"\n"
+"Snimi FTPom na host: %s\n"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Italian"
-msgstr "Talijanska"
+msgid "Argentina"
+msgstr "Argentina"
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Icelandic"
-msgstr "Islandska"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Iranian"
-msgstr "Iranska"
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Domain Name Server"
+msgstr "Ime domene"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Izraelska (fonetska)"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Level:"
+msgstr "Sigurnosna razina"
 
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Israeli"
-msgstr "Izraelska"
+msgid "Mount points must begin with a leading /"
+msgstr "Mjesto montiranja mora početi sa /"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Postfix Mail Server"
+msgstr "Postfix mail poslužitelj, Inn news poslužitelj"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Croatian"
-msgstr "Hrvatska"
+msgid "Quit without saving"
+msgstr "Da završim bez spremanja"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Hungarian"
-msgstr "Mađarska"
+msgid "Yemen"
+msgstr "Yemen"
 
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "Gurmukhi"
+msgid "This product is available on the MandrakeStore Web site."
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Gujarati"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
 msgstr ""
+"Upišite maksimalnu dozvoljenu\n"
+" veličinu za Drakbackup"
 
-#: ../../keyboard.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Greek"
-msgstr "Grčka"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Postoji mnogo stvari za odabir iz (%s).\n"
 
-#: ../../keyboard.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzijska  (\"Latin\" raspored)"
+msgid "Hard drive detection"
+msgstr "Otkrivanje hard diskova"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzijska  (\"Ruski\" raspored)"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Niste izabrali niti jednu grupu paketa\n"
+"Izaberite minimalnu instalaciju ako želite"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "French"
-msgstr "Francuska"
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "Please enter the WebDAV server URL"
+msgstr "Upišite brzinu cd snimača"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Finnish"
-msgstr "Finska"
+msgid "Tajikistan"
+msgstr "Tajikistan"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
 #, c-format
-msgid "Spanish"
-msgstr "Španjolska"
+msgid "Accept"
+msgstr "Prihvati"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Estonian"
-msgstr "Estonska"
+msgid "Description"
+msgstr "Opis"
 
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Švedska)"
+msgid "Error opening %s for writing: %s"
+msgstr "Greška prilikom otvaranja %s za pisanje: %s"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norveška)"
+msgid "Mouse type: %s\n"
+msgstr "Vrsta miša: %s\n"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (USA)"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "Vaša kartica može imati 3D hardware-sku akceleraciju sa XFree %s."
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Danish"
-msgstr "Danska"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Izaberite prostor na CDu"
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Devanagari"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "German (no dead keys)"
-msgstr "Njemačka (bez mrtvih tipaka)"
+msgid "Expert Area"
+msgstr "Ekspertno područje"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "German"
-msgstr "Njemačka"
+msgid "Choose a monitor"
+msgstr "Odaberite monitor"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Czech (QWERTY)"
-msgstr "Češka (QWERTY)"
+msgid "Empty label not allowed"
+msgstr "Prazna oznaka nije dozvoljena"
 
 #: ../../keyboard.pm:1
 #, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Češka (QWERTZ)"
+msgid "Maltese (UK)"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Swiss (French layout)"
-msgstr "Švicarska (francuski raspored)"
+msgid "I can't add any more partition"
+msgstr "Ne mogu dodati niti jednu dodatnu particiju"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Swiss (German layout)"
-msgstr "Švicarska (Njemački raspored)"
+msgid "Size in MB: "
+msgstr "Veličina u MB:"
 
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Belarusian"
-msgstr "Bjeloruska"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bosnian"
-msgstr "Estonska"
+msgid "Remote printer"
+msgstr "Udaljeni pisač"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilska (ABNT-2)"
+msgid "Please choose a language to use."
+msgstr "Molim izaberite jezik koji želite koristiti."
 
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bugarska (BDS)"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"UPOZORENJE: Ovaj uređaj je bio prethodno konfiguriran za spajanje na "
+"Internet.\n"
+"Jednostavno prihvatite ovaj uređaj konfiguriran.\n"
+"Promjena polja niže će prepisati ovu konfiguraciju."
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Bugarska (fonetska)"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"Mogu podesiti da se vaše računalo automatski prijavi kao jedan korisnik.\n"
+"Da li želite koristiti tu pogodnost?"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Bengali"
-msgstr "omogući"
+msgid "Floppy format"
+msgstr "Formatiraj"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Belgian"
-msgstr "Belgijska"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbejdžanska (latinica)"
+msgid "Generic Printers"
+msgstr "Generički pisač"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Arabic"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
 msgstr ""
+"Izaberite port preko kojeg je vaš pisač povezan ili upišite ime uređaja/"
+"datotekeu liniju za unos."
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armenska (fonetska)"
-
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armenska (pisaća mašina)"
+msgid "The scanners on this machine are available to other computers"
+msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Armenian (old)"
-msgstr "Armenska (stara)"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "First sector of the root partition"
+msgstr "Prvi sektor boot particije"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Albanian"
-msgstr "Albanska"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Alternative drivers"
+msgstr "Alternativna testna stranica (A4)"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Polish"
-msgstr "Poljska"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Provjerite sve opcije koje trebate.\n"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Initrd"
+msgstr "Initrd"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabwe"
+msgid "Cape Verde"
+msgstr "Cape Verde"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Zambia"
-msgstr "Zambia"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr ""
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "South Africa"
-msgstr "Južna Afrika"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
 
 #: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Serbia"
-msgstr "serijski"
+#, c-format
+msgid "Guam"
+msgstr "Guam"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Izaberite port preko kojeg je vaš pisač povezan ili upišite ime uređaja/"
+"datotekeu liniju za unos."
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Yemen"
-msgstr "Yemen"
+msgid "/Options/Test"
+msgstr "/Opcije/Proba"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Ova razina se treba koristiti sa pažnjom. Ona čini vaš sustav mnogo lakšim "
+"za korištenje,\n"
+"ali vrlo osjetljiv: ne smije biti korišten za računala koja su povezana u "
+"mreži ili na Internet. Naime, nema lozinke za pristup."
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, fuzzy, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis and Futuna Islands"
+msgid "Mounting partition %s"
+msgstr "Formatiram particiju %s"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "User name"
+msgstr "Korisničko ime"
 
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "New configuration (isdn-light)"
+msgstr "Nova konfiguracija (isdn-light)"
+
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "Vietnam"
-msgstr "Viet Nam"
+msgid "Userdrake"
+msgstr "Printerdrake"
 
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Djevičanski Otoci (U.S.)"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Koju particiju želite koristiti za Linux4Win?"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Virgin Islands (British)"
-msgstr "Djevičanski Otoci (Britanski)"
+msgid "Backup system"
+msgstr "Pohrani sustav"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
+msgid "Test pages"
+msgstr "Testne stranice"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Saint Vincent and the Grenadines"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Popis podataka za povrat:\n"
+"\n"
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, fuzzy, c-format
-msgid "Vatican"
-msgstr "Latvija"
+msgid "Checking %s"
+msgstr "Kopiram %s"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistan"
+msgid "TCP/Socket Printer Options"
+msgstr "Opcije TCP/Socket pisača"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Uruguay"
-msgstr "Urugvaj"
+msgid "Card mem (DMA)"
+msgstr "Memorija kartice (DMA)"
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "United States Minor Outlying Islands"
+msgid "France"
+msgstr "Francuska"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Uganda"
-msgstr "Uganda"
+msgid "browse"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Ukraine"
-msgstr "Ukrajina"
+msgid "Checking installed software..."
+msgstr "Provjeravam instalirani softver..."
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Tanzania"
-msgstr ""
+msgid "Remote printer name missing!"
+msgstr "Nedostaje ime udaljenog pisača!"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Taiwan"
-msgstr "Tajland"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad i Tobago"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr ""
+"Da li želite postaviti ovaj pisač (\"%s\")\n"
+"kao podrazumijevani pisač?"
 
 #: ../../lang.pm:1
 #, c-format
 msgid "Turkey"
 msgstr "Turska"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Tonga"
-msgstr "Tonga"
-
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Tunisia"
-msgstr "Tunis"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch usb"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Number of buttons"
+msgstr "2 gumba"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "East Timor"
-msgstr "Istočni Timor"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vijetnamska \"numeric row\" QWERTY"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Module"
+msgstr "Miš"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Tajikistan"
-msgstr "Tajikistan"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"Uz to, ovaj program ne može stvarati redove ili \"foomatic-configure\" sene "
+"može prebaciti."
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr "Tajland"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Hardware"
+msgstr "na tvrdi disk"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Togo"
-msgstr "Togo"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Ctrl i Alt tipke istodobno"
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "French Southern Territories"
-msgstr "Francuski južni teritoriji"
+msgid "United States"
+msgstr "Sjedinjene Američke Države"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Chad"
-msgstr "Čad"
+msgid "Default OS?"
+msgstr "Uobičajeni OS?"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks and Caicos Islands"
+msgid "Swiss (German layout)"
+msgstr "Švicarska (Njemački raspored)"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Swaziland"
-msgstr "Swaziland"
+msgid "Configure all heads independently"
+msgstr "Podesi sve zaslone nezavisno"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Syria"
-msgstr "Suriname"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"Ovaj je popis svih prepoznatih pisača. Izaberite pisač kojeg želite podesiti."
+"Namještanje pisača će raditi potpuno automatski.Ako vaš pisač nije ispravno "
+"prepoznat ili ako biste radije ručno namještalipisač, uključite \"Ručno "
+"namještanje\"."
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "NTP Server"
+msgstr "NTP Poslužitelj"
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome and Principe"
+msgid "Load/Save on floppy"
+msgstr "Učitaj/Spremi na disketu"
 
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Suriname"
-msgstr "Suriname"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "Somalia"
-msgstr "Somalija"
+msgid "nice"
+msgstr "lijepo"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Senegal"
-msgstr "Senegal"
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Leaving in %d seconds"
+msgstr "%d sekundi"
 
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Izaberite serijski port na kojemu se nalazi modem."
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Country"
+msgstr "Zemlja:"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Slovakia"
-msgstr "Slovačka"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Property"
+msgstr "Port"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard and Jan Mayen Islands"
+msgid "Ghostscript"
+msgstr "Ghostscript"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Slovenia"
-msgstr "Slovenija"
+msgid "LAN Configuration"
+msgstr "LAN postavke"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Saint Helena"
-msgstr "Sveta Helena"
+msgid "Ghana"
+msgstr "Gana"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Singapore"
-msgstr "Singapur"
+msgid "Path or Module required"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Sudan"
-msgstr "Sudan"
+msgid "Advanced Options"
+msgstr "Napredne opcije"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Seychelles"
-msgstr "Seychelles"
+msgid "Coma bug"
+msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Solomon Islands"
-msgstr "Solomon Otoci"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"U ovoj točki instalacije, trebate izabrati koje partiticije ćete koristiti "
+"za\n"
+"instalaciju vašeg novog Mandrake Linux sustava. Ukoliko su\n"
+"particije već definirane (iz prethodne instalacije GNU/Linux-a ili iz\n"
+"drugih particijskih alata), možete koristiti postojeće particije. Inače,\n"
+"moraju biti definirane.\n"
+"\n"
+"Za pravljenje particija, morate prvo izabrati tvrdi disk. Možete izabrati \n"
+"disk za particioniranje klikanjem na \"hda\" za prvi IDE disk, \"hdb\" za\n"
+"drugi ili \"sda\" za prvi SCSI disk i tako dalje.\n"
+"\n"
+"Za particioniranje izabranog hard diska, možete izabrati ove opcije:\n"
+"\n"
+" * \"Obriši sve\": ova opcija će obrisati sve raspoložive particije na\n"
+"odabranom hard disku.\n"
+"\n"
+" * \"Auto alokacija\": ova opcija vam dozvoljava da automatski napravite\n"
+"\"Ext2\" i swap particije u slobodnom prostoru vašeg hard diska.\n"
+"\n"
+" * \"Dodatno\": pristup dodatnim mogućnostima:\n"
+"\n"
+"   * \"Spasi particijsku tablicu\": ukoliko je vaša particijska tablica\n"
+"oštećena, možete probati spasiti ju koristeći ovu opciju. Molimo\n"
+"budite pažljivi i zapamtite da ne mora biti uspješna.\n"
+"\n"
+"   * \"Povrati\": možete koristiti ovu opciju za odustajanje od vaših "
+"promjena.\n"
+"\n"
+"   * \"Ponovno učitaj\": možete koristiti ovu opciju ukoliko želite vratiti\n"
+"unazad sve promjene i učitati vašu inicijalnu particijsku tablicu\n"
+"\n"
+"   * \"Čarobnjak\": ukoliko želite koristiti čarobnjak za particioniranje "
+"vašeg\n"
+"hard diska, možete koristiti ovu opciju. Preporučeno je ukoliko \n"
+"nemate dovoljno znanja oko particioniranja.\n"
+"\n"
+"   * \"Vrati sa diskete\": ukoliko ste spremili vašu particijsku tablicu na\n"
+"disketu tijekom prijašnje instalacije, možete\n"
+"je vratiti koristeći ovu opciju.\n"
+"\n"
+"   * \"Spremi na disketu\": ukoliko želite spremiti vašu particijsku tablicu "
+"na\n"
+"disketu kako biste je mogli kasnije vratiti, možete koristiti ovu\n"
+"opciju. Jako je preporučljivo koristiti ovu opciju\n"
+"\n"
+"   * \"Završi\": kada ste završili s particioniranjem vašeg hard diska,\n"
+"koristite ovu opciju za spremanje vaših promjena.\n"
+"\n"
+"Za informaciju, možete dohvatiti bilo koju opciju koristeći tastaturu:\n"
+"navigiranje kroz particije se obavlja koristeći [Tab] i [Up/Down] strelice.\n"
+"\n"
+"Kada je particija odabrana, možete koristiti:\n"
+"\n"
+" * Ctrl-c za pravljenje novih particija (kada je prazna particija\n"
+"izabrana)\n"
+"\n"
+" * Ctrl-d za brisanje particije\n"
+"\n"
+" * Ctrl-m za postavljanje točke montiranja\n"
+"\n"
+"Za informacije o raznim dostupnim datotečnim sustavima, pročitajte ext2fs\n"
+"poglavlje u ``Reference Manual''\n"
+"\n"
+"Ukoliko instalirate na PPC računalo, željet ćete napraviti malu HFS\n"
+"'bootstrap' particiju od najmanje 1MB koju će koristiti\n"
+"yaboot bootloader. Ukoliko se odlučite za pravljenje malo veće \n"
+"particije, recimo 50MB, možete ju pronaći korisnom za stavljanje\n"
+"dodatnog kernela i ramdisk slike u slučaju nužde."
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Saudi Arabia"
-msgstr "Saudijska Arabija"
+msgid ""
+"Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Rwanda"
-msgstr "Rwanda"
+msgid "There was an error installing packages:"
+msgstr "Pojavila se greška kod instalacije paketa:"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Russia"
-msgstr "Ruska"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Lexmark inkjet configuration"
+msgstr "Lexmark inkjet konfiguracija"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Romania"
-msgstr "Rumunjska"
+msgid "Undo"
+msgstr "Vrati"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Reunion"
-msgstr "Reunion"
+msgid "Save partition table"
+msgstr "Spremi particijsku tabelu"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Qatar"
-msgstr "Qatar"
+msgid "Finnish"
+msgstr "Finska"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "Macedonia"
+msgstr "Makedonija"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Paraguay"
-msgstr "Paragvaj"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"Dijeljenje po korisniku koristi grupu \"fileshare\". \n"
+"Možete koristiti userdrake za dodavanje korisnika u navedenu grupu."
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Portugal"
-msgstr "Portugal"
+msgid "Slovenian"
+msgstr "Slovenska"
 
 #: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Palestine"
-msgstr "Spremi odabir paketa"
+msgid "Libya"
+msgstr "Liberija"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Riko"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "Podešavam skriptove, instaliram softver, pokrećem poslužitelje..."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint Pierre and Miquelon"
+msgid "Table"
+msgstr "Tablica"
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Poland"
-msgstr "Poljska"
+msgid "I don't know how to format %s in type %s"
+msgstr "ne znam kako formatirati %s kao vrstu %s"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model"
+msgstr "Miš"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Philippines"
-msgstr "Filipini"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua Nova Gvineja"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Stop Server"
+msgstr "NIS Poslužitelj"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "French Polynesia"
-msgstr "Francuska Polinezija"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Peru"
-msgstr "Peru"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Modem"
+msgstr "Miš"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Panama"
-msgstr "Panama"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Oman"
-msgstr "Oman"
+msgid "Tuvalu"
+msgstr "Tuvalu"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
 #, c-format
-msgid "New Zealand"
-msgstr "Novi Zeland"
+msgid "Use auto detection"
+msgstr "Koristi auto detekciju"
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Niue"
-msgstr "Niue"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM dodaje podršku za mišu tekst baziranim Linux aplikacijama kao što je\n"
+"Midnight Commander. Također pruža miš baziranim konzolama odreži-i-zalijepi "
+"operacije,\n"
+"i uključuje podršku za iskočive menije u konzoli."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "Started on boot"
+msgstr "Pokrenuto pri podizanju"
 
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Nigeria"
-msgstr "Nigeria"
+msgid "Automatically find available printers on remote machines"
+msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolk Island"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"Snimi FTPom na host: %s\n"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Niger"
-msgstr "Niger"
+msgid "East Timor"
+msgstr "Istočni Timor"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "New Caledonia"
-msgstr "Nova Kaledonia"
+msgid "Del profile..."
+msgstr "Obriši profil..."
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Namibia"
-msgstr "Namibia"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Mozambique"
-msgstr "Mozambique"
+msgid "Installing Foomatic..."
+msgstr "Instaliram Foomatic ..."
 
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
 #, c-format
-msgid "Malaysia"
-msgstr "Malazija"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Molim prvo se odjavite te pritisnite Ctrl-Alt-BackSpace"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Mexico"
-msgstr "Meksiko"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "detected"
+msgstr "detektirano %s"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Malawi"
-msgstr "Malawi"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Paket %s treba instalirati. Da li ga želite instalirati?"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Maldives"
-msgstr "Maldivi"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package: "
+msgstr "Odabir paketa"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Mauritius"
-msgstr "Mauritius"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid "SECURITY WARNING!"
+msgstr "SIGURNOSNO UPOZORENJE!"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "StarOffice"
+msgstr "StarOffice"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Mauritania"
-msgstr "Mauritania"
+msgid "No, I don't want autologin"
+msgstr "Ne, ne želim automatsko prijavljivanje"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Martinique"
-msgstr "Martinique"
+msgid "Windows Migration tool"
+msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Northern Mariana Islands"
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "All languages"
+msgstr "Odaberite jezik"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Mongolia"
-msgstr "Mongolija"
+msgid "Removing %s"
+msgstr "Uklanjam %s"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
+msgid "Testing your connection..."
+msgstr "Testiram vašu vezu..."
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Mali"
-msgstr "Mali"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cache size"
+msgstr "chunk veličina"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Macedonia"
-msgstr "Makedonija"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Lozinke su sada uključene međutim još ne preporučam korištenje ovog računala "
+"u mrežnom okolišu."
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Marshall Islands"
-msgstr "Marshall Islands"
+msgid "Start sector: "
+msgstr "Početni sektor:"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Madagascar"
-msgstr "Madagaskar"
+msgid "Congo (Brazzaville)"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
 #, c-format
-msgid "Moldova"
-msgstr "Moldova"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Paket %s treba instalirati. Da li ga želite instalirati?"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Monaco"
-msgstr "Monako"
+msgid "Seychelles"
+msgstr "Seychelles"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Morocco"
-msgstr "Moroko"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+"Printerdrake je usporedio ime modela koje je dobio autodetekcijom s "
+"modelimapopisanim u svojoj bazi podataka da bi našao koji najbolje odgovara. "
+"Ovaj izbormože biti pogrešan, posebice kada vaš pisač uopće nije u bazi "
+"pisača. Zatoprovjerite da li je izbor točan i stisnite \"Model je točan\" "
+"ako jest, a ako nestisnite \"Ručno izaberi model\" da bi mogli ručno "
+"izabrati model pisačana slijedećem ekranu.\n"
+"\n"
+"Za vaš pisač Printerdrake je našao:\n"
+"\n"
+"%s"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Libya"
-msgstr "Liberija"
+msgid "Bad password on %s"
+msgstr "Bez lozinke"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Latvia"
-msgstr "Latvija"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Luxembourg"
-msgstr "Luksemburg"
+msgid "Zambia"
+msgstr "Zambia"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Lithuania"
-msgstr "Letonija"
+msgid "Security Administrator (login or email)"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Liberia"
-msgstr "Liberija"
+msgid "Romanian (qwerty)"
+msgstr "Rumunjska (qwerty)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
+msgid "Under Devel ... please wait."
+msgstr "Razvija se ... molimo sačekajte."
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Liechtenstein"
-msgstr "Linhenštajn"
+msgid "Czech Republic"
+msgstr "Češka Republika"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Saint Lucia"
-msgstr "Sveta Lucija"
+msgid "Egypt"
+msgstr "Egipat"
 
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Lebanon"
-msgstr "Lebanon"
+msgid "Old configuration (isdn4net)"
+msgstr "Stara konfiguracija (isdn4net)"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Laos"
-msgstr ""
+msgid "Sound card"
+msgstr "Zvučna kartica"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Kazakhstan"
-msgstr "Kazakhstan"
+msgid "Import Fonts"
+msgstr "Uvoz fontova"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Cayman Islands"
-msgstr "Kajmansko otočje"
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Vaš sustav sadrži samo jednu veliku particiju.\n"
+"(Microsoft DOS/Windows obično koristi jednu particiju).\n"
+"Preporučam da promijenite veličinu particije\n"
+"(kliknite prvo na particiju te onda na \"Promijeni veličinu\")"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Kuwait"
-msgstr "Kuvajt"
+msgid "Suppress Temporary Files"
+msgstr "Potisni privremene datoteke"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Korea"
-msgstr "Više"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Change partition type"
+msgstr "Mijenjam tip particije"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Korea (North)"
+msgid ""
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
 msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts and Nevis"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Network Options"
+msgstr "Još opcija"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Comoros"
-msgstr "Comoros"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid "Statistics"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
 #, c-format
-msgid "Cambodia"
-msgstr "Kambodža"
+msgid "(on %s)"
+msgstr "(na %s)"
 
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Kyrgyzstan"
-msgstr "Kyrgyzstan"
+msgid "MM Series"
+msgstr "MM Serije"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Kenya"
-msgstr "Kenija"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Biblioteka koja štiti od prekoračenja spremnika i format string napada."
 
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Japan"
-msgstr "Japan"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Jordan"
-msgstr "Jordan"
+msgid "average"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Jamaica"
-msgstr "Jamajka"
+msgid "New printer name"
+msgstr "Novo ime pisača"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Iceland"
-msgstr "Iceland"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Iran"
-msgstr "Irak"
+msgid "Equatorial Guinea"
+msgstr "Ekvatorijalna Gvineja"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Iraq"
-msgstr "Irak"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Teritorij Britanskog Indijskog Oceana"
+msgid "Build Backup"
+msgstr "Složi sigurnosnu pohranu"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "India"
-msgstr "Indija"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"Da bi ispisali datoteku iz komandne linije (terminalskog prozora) "
+"koristitenaredbu \"%s <datoteka>\" ili \"%s <datoteka>\".\n"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Israel"
-msgstr "Izrael"
+msgid "Currently, no alternative possibility is available"
+msgstr ""
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Ireland"
-msgstr "Irska"
+msgid "Romanian (qwertz)"
+msgstr "Rumunjska (qwertz)"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Indonesia"
-msgstr "Indonezija"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Write Config"
+msgstr "ponovno postavi"
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Hungary"
-msgstr "Madžarska"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"Routed daemon omogućava automatsku IP ruter tablicu koja se obnavlja\n"
+"putem RIP protokola. Dok se RIP najšire koristi na malim mrežama, više "
+"kompleksniji\n"
+"ruting protokoli su potrebni za kompleksnije mreže."
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Haiti"
-msgstr "Haiti"
+msgid "Kiribati"
+msgstr "Kiribati"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Croatia"
-msgstr "Hrvatska"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Honduras"
-msgstr "Honduras"
+msgid "Browse"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard Island and McDonald Islands"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Hong Kong"
-msgstr "Hong Kong"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "China"
-msgstr "Kina"
+msgid "CDROM"
+msgstr "\t-CDROM.\n"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Guyana"
-msgstr "Guyana"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Da li želite pokušati spajanje na Internet ?"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Guinea-Bissau"
-msgstr "Gvineja-Bisau"
+msgid "Belgian"
+msgstr "Belgijska"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid "Do you have an ISA sound card?"
+msgstr "Da li imate ISA zvučnu karticu?"
 
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
-msgid "Guatemala"
-msgstr "Gvatemala"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Nije pronađen niti jedan mrežni adapter na vašem sustavu.\n"
+"Ne mogu postaviti ovu vrstu veze."
 
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, fuzzy, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "South Georgia and the South Sandwich Island"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "Ekvatorijalna Gvineja"
+msgid "Windows"
+msgstr "Dobavi Windows fontove"
 
-#: ../../lang.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Guadeloupe"
-msgstr "Guadeloupe"
+msgid "Can't make screenshots before partitioning"
+msgstr "Ne mogu napraviti screenshotove prije particioniranja"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Guinea"
-msgstr "Gvineja"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Name"
+msgstr "Ime računala"
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Gambia"
-msgstr "Gambija"
+msgid "/File/Save _As"
+msgstr "/Datoteka/Snimi_kao"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Greenland"
-msgstr "Greenland"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Ghana"
-msgstr "Gana"
+msgid "Delay before booting default image"
+msgstr "Odgoda prije bootiranja uobičajenog imagea"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "French Guiana"
-msgstr "Francuska Gvineja"
+msgid "Restrict command line options"
+msgstr "Ograničene opcije na komandnoj liniji"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Georgia"
-msgstr "Georgia"
+msgid "East Europe"
+msgstr "Istočna Europa"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Grenada"
-msgstr "Grenada"
+msgid "Use free space"
+msgstr "Koristi slobodan prostor"
 
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "United Kingdom"
-msgstr "Ujedinjeno Kraljevstvo"
+msgid "use dhcp"
+msgstr "koristi dhcp"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Gabon"
-msgstr "Gabon"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Mail alert"
+msgstr "Upozorenje na poštu/SMS"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Faroe Islands"
-msgstr "Faroe Otočje"
+msgid "Internet configuration"
+msgstr "Postava Interneta"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Micronesia"
-msgstr "Micronesia"
+msgid "Uzbekistan"
+msgstr "Uzbekistan"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falkland Otočje (Malvinas)"
+msgid "Detected %s"
+msgstr "Detektirano %s"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Fiji"
-msgstr "Fiji"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _printers"
+msgstr "Koristi auto detekciju"
 
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
 #, c-format
-msgid "Finland"
-msgstr "Finska"
+msgid "Finish"
+msgstr "Završi"
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Ethiopia"
-msgstr "Etiopija"
+msgid "Show automatically selected packages"
+msgstr "Prikaži automatski odabrane pakete"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Spain"
-msgstr "Španjolska"
+msgid "CPU flags reported by the kernel"
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
+msgid "Togo"
+msgstr "Togo"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Western Sahara"
-msgstr "Zapadna Sahara"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Egypt"
-msgstr "Egipat"
+msgid "16 MB"
+msgstr "16 MB"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Estonia"
-msgstr "Estonija"
+msgid "Please try again"
+msgstr "Molim pokušajte ponovo"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Ecuador"
-msgstr "Ekvador"
+msgid "The model is correct"
+msgstr "Model je točan"
 
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Algeria"
-msgstr "Algerija"
+msgid "FAT resizing failed: %s"
+msgstr "Mijenjanje FAT veličine nije uspjelo: %s"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Dominican Republic"
-msgstr "Dominikanska Republika"
+msgid "Individual package selection"
+msgstr "Individualan odabir paketa"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Dominica"
-msgstr "Dominica"
+msgid "This partition is not resizeable"
+msgstr "Ova particija nije promjenjiva u veličini"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Denmark"
-msgstr "Danska"
+msgid "Location"
+msgstr "Lokacija"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Djibouti"
-msgstr "Đibuti"
+msgid "USA (cable-hrc)"
+msgstr "SAD (kabl-hrc)"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Cyprus"
-msgstr "Cipar"
+msgid "Journalised FS"
+msgstr "Journalised FS"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Christmas Island"
-msgstr "Christmas Otok"
+msgid "Guatemala"
+msgstr "Gvatemala"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Cape Verde"
-msgstr "Cape Verde"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "(na ovom računalu)"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Cuba"
-msgstr "Kuba"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS uređaj slovo: %s (nagađanje)\n"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Colombia"
-msgstr "Kolumbija"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "Izaberi datoteke ili mape i stisni 'Dodaj'"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Cameroon"
-msgstr "Kamerun"
+msgid "Bahrain"
+msgstr "Bahrain"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Chile"
-msgstr "Čile"
+msgid "omit scsi modules"
+msgstr "izostavi scsi module"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Cook Islands"
-msgstr "Cook Islands"
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Cote d'Ivoire"
-msgstr "Cote d'Ivoire"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"Pošto radite mrežnu instalaciju, vaša mreža je već konfigurirana.\n"
+"Pritisnite U redu da zadržite postojeće postavke, ili Odustani za ponovno "
+"konfiguriranje vaše mrežne/Internet veze.\n"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Switzerland"
-msgstr "Switzerland"
+msgid "Keyboard layout: %s\n"
+msgstr "Raspored tipkovnice: %s\n"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Congo (Brazzaville)"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
 msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Central African Republic"
-msgstr "Centralna Afrička Republika"
-
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Congo (Kinshasa)"
+msgid "Maltese (US)"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Cocos (Keeling) Otočje"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Montira i Demontira sve Mrežne datotečne sustave (NFS), SMB (Lan\n"
+"Manager/Windows), i NCP (NetWare) točke montiranja."
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Canada"
-msgstr "Kanada"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Tvcard"
+msgstr "TV kartica"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Belize"
-msgstr "Belize"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "Prebaci u normalni mod"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Belarus"
-msgstr "Belarus"
+msgid "Size"
+msgstr "Veličina"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Botswana"
-msgstr "Bocvana"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Bouvet Island"
-msgstr "Bouvet Otok"
+msgid "Greenland"
+msgstr "Greenland"
 
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Bhutan"
-msgstr "Butan"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Bahamas"
-msgstr "Bahami"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Brazil"
-msgstr "Brazil"
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
+msgstr ""
+"Postavljanje dijeljenja veze prema internetu je već napravljeno.\n"
+"Trenutno je omogućeno.\n"
+"\n"
+"Što želite napraviti?"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Bolivia"
-msgstr "Bolivija"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete All NBIs"
+msgstr "Izabrao sve"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei Darussalam"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+"    * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"LILO i grub su GNU/Linux bootloaderi. Ovaj korak je obično potpuno "
+"automatiziran.\n"
+"U stvarim DrakX analizira boot sektor diska i ponaša se u skladu s onim što "
+"je\n"
+"tamo pronašao:\n"
+"\n"
+" * ako je pronađen Windows boot sektor, bit će zamijenjen sa grub/LILO boot "
+"sektorom.\n"
+"Prema tome, moći ćete podizati ili GNU/Linux ili neki drugi OS;\n"
+"\n"
+" * ako je pronađen grub/LILO boot sektor, bit će zamijenjen sa novim.\n"
+"\n"
+"Ako postoji neka dvojba, DrakX će izbaciti dijalog za različitim opcijama.\n"
+"\n"
+" * \"Koji bootloader koristiti\": imate tri izbora:\n"
+"\n"
+"    * \"GRUB\": ako preferirate grub (tekstualni izbornik).\n"
+"\n"
+"    * \"LILO sa grafičkim izbornikom\": ako preferirate LILO sa svojim\n"
+"grafičkim sučeljem.\n"
+"\n"
+"    * \"LILO sa tekstualnim izbornikom\": ako preferirate LILO sa svojim\n"
+"tekstualnim sučeljem.\n"
+"\n"
+" * \"Boot uređaj\": u većini slučajeva, nećete mijenjati podrazumijevani\n"
+"(\"/dev/hda\"), ali ak vam je tako draže, bootloader se može instalirati na "
+"drugi\n"
+"tvrdi disk (\"/dev/hdb\"), ili čak na disketu (\"/dev/fd0\");\n"
+"\n"
+" * \"Vrijeme do podizanja podrazumijevane slike\": kada pokrećete računalo,\n"
+"ovo je vrijeme koje korisnik ima da u bootloader izborniku izabere drugi "
+"izbor\n"
+"od podrazumijevanog.\n"
+"\n"
+"!! Pazite da, ako izaberete da se bootloader ne instalira (pritiskom na\n"
+"\"Odustani\"), morate na neki drugi način osigurati podizanje Mandrake/"
+"Linux\n"
+"sustava! Također, budite sigurni da znate što radite prije mijenjanja "
+"opcija. !!\n"
+"\n"
+"Pritiskom na \"Napredno\" u ovom dijalogu dobit ćete mnoštvo naprednih "
+"opcija,\n"
+"rezerviranih za napredne korisnike.\n"
+"\n"
+"Nakon što ste namjestili opće parametre bootloadera, bit će prikazan popis "
+"opcija\n"
+"za podizanje sustava koje će biti dostupne prilikom podizanja sustava.\n"
+"\n"
+"Ako postoji neki drugi operacijski sustav instaliran na vašem računalu, "
+"automatski\n"
+"će biti dodan boot izborniku. Ovdje možete fino podesiti postojeće opcije. "
+"Izaberite\n"
+"stavku i stisnite \"Promijeni\" da bi je promijenili ili uklonili; \"Dodaj\" "
+"stvara\n"
+"novu stavku; i \"Završi\" kreće dalje na slijedeći instalacijski korak."
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Benin"
-msgstr "Benin"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Koju konfiguraciju XFree-a želite imati?"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "More"
+msgstr "Više"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Bahrain"
-msgstr "Bahrain"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Sa ovom sigurnosnom razinom, korištenje ovog sustava kao poslužitelj postaje "
+"moguće.\n"
+"Sigurnost je sada toliko visoka da se sustav može koristiti kao poslužitelj\n"
+"koji prima zahtjeve od mnogo klijenata. Upozorenje: ako je vaše računalo "
+"samo klijent na Internetu, bolje da izaberete nižu razinu."
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Bulgaria"
-msgstr "Bugarska"
+msgid "Account Password"
+msgstr "Korisnička Lozinka"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Odlučili ste instalirati bootloader na particiju.\n"
+"To podrazumijeva da već imate bootloader na tvrdom disku sa kojeg podižete\n"
+"sustav (npr. System Commander).\n"
+"\n"
+"Sa kojeg diska želite podizati?"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Bangladesh"
-msgstr "Bangladeš"
+msgid "Tajik keyboard"
+msgstr "Tajik tipkovnica"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
+"Možete preslikati postavke pisača koje ste napravili za spooler %s na %s,vaš "
+"trenutni spooler. Svi konfiguracijski podaci (ime pisača, opis, lokacija,"
+"vrsta veze i podrazumijevane opcije) su preuzeti, ali ne i poslovi.\n"
+"Ne mogu se svi redovi prebaciti zbog:\n"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosna i Hercegovina"
+msgid "Font List"
+msgstr "Popis fontova"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Azerbaijan"
-msgstr "Azerbedžan"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader.  If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"Trebati ćete promjeniti vaš Otvoreni Firmware boot-uređaj kako bi\n"
+" omogućili bootloader. Ukoliko ne želite vidjeti bootloader prompt pri\n"
+" podizanju, pritisnite Command-Option-O-F pri podizanju i unesite:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Tada napišite: shut-down\n"
+"Pri slijedećem podizanju trebali biste vidjeti prompt bootloadera."
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"Čini se da imate OldWorld ili Nepoznato\n"
+" računalo, yaboot bootloader neće moći raditi kod vas.\n"
+"Instalacija će nastaviti, ali ćete morati\n"
+" koristiti BootX da podignete vaše računalo"
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Australia"
-msgstr "Australija"
+msgid "Select file"
+msgstr "Odaberite datoteku"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "American Samoa"
-msgstr "Američki Samoa"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr ""
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Argentina"
-msgstr "Argentina"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"Ove komande možete također koristiti u \"Printing command\" polju dijalogaza "
+"ispis mnogih aplikacija, ali ovdje ne stavljate ime datoteke jerdatoteku za "
+"ispis dobavlja sama aplikacija.\n"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Antarctica"
-msgstr "Antartika"
+msgid "Japan"
+msgstr "Japan"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid "Print option list"
+msgstr "Popis ispisnih opcija"
 
-#: ../../lang.pm:1
+#: ../../standalone/localedrake:1
 #, c-format
-msgid "Netherlands Antilles"
-msgstr "Netherlands Antilles"
+msgid "The change is done, but to be effective you must logout"
+msgstr "Promjena je izvršena, ali da bi imala učinak, morate se odlogirati"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Armenia"
-msgstr "Armenija"
+msgid "Search servers"
+msgstr "Poslužitelji za pretraživanje"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Albania"
-msgstr "Albanija"
+msgid "NCP queue name missing!"
+msgstr "Nedostaje ime NCP reda!"
 
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr ""
+"Upozorenje, otkrivena je još jedna Internet veza, koja možda koristivašu "
+"mrežu"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "Cd-Rom naslovljen \"%s\""
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua i Barbuda"
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
+msgstr ""
+"Sprema i vraća sustavsku entropiju za veću kvalitetu generiranja\n"
+"slučajnih brojeva."
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "United Arab Emirates"
-msgstr "Ujedinjeni Arapski Emirati"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../share/advertising/07-server.pl:1
 #, c-format
-msgid "Andorra"
-msgstr "Andora"
+msgid "Turn your computer into a reliable server"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Afghanistan"
-msgstr "Afganistan"
+msgid " (driver %s)"
+msgstr " (upravljački program %s)"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid ""
+"Loopback file(s):\n"
+"   %s\n"
+msgstr ""
+"Loopback datoteka(e):\n"
+"   %s\n"
 
-#: ../../loopback.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Circular mounts %s\n"
-msgstr "Kružno montiranje %s\n"
+msgid "I don't know"
+msgstr "Ne znam"
 
-#: ../../lvm.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Ukloni logički volumen prvo\n"
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", TCP/IP host \"%s\", port %s"
 
-#: ../../modules.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
 msgstr ""
-"PCMCIA podrška više ne postoji za 2.2 kernele. Molimo koristite 2.4 kernel."
+"Sada ćete instalirati disketu za automatsku instalaciju. Ova mogućnost "
+"jedonekle opasna i mora se oprezno koristiti.\n"
+"\n"
+"Sa tom mogućnošću, moći ćete ponoviti instalaciju kako ste je proveli naovom "
+"računalu, s tim da ćete biti interaktivno priupitani u nekim koracima,da bi "
+"promijenili njihove vrijednosti.\n"
+"\n"
+"Za maksimalnu sigurnost, particioniranje i formatiranje se nikad "
+"nećeobavljati automatski, što god izabrali prilikom instalacije na ovo "
+"računalo.\n"
+"\n"
+"Želite li nastaviti?"
 
-#: ../../mouse.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "POMAKNITE VAŠ KOTAČIĆ!"
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "To activate the mouse,"
-msgstr "Za aktiviranje miša,"
+msgid "Post Uninstall"
+msgstr "Post deinstalacija"
 
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Please test the mouse"
-msgstr "Molimo istestirajte miša."
+msgid " ("
+msgstr ""
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "No mouse"
-msgstr "Nema miša"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "Sigurnosna razina"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "none"
-msgstr "niti jedan"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Mongolian (cyrillic)"
+msgstr "Srpska (čirilica)"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "3 buttons"
-msgstr "3 gumba"
+msgid "Add a module"
+msgstr "Dodaj modul"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "2 buttons"
-msgstr "2 gumba"
+msgid "Profile to delete:"
+msgstr "Profil za obrisati:"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "1 button"
-msgstr "1 gumb"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Local measure"
+msgstr "Lokalne datoteke"
 
 #: ../../mouse.pm:1
 #, c-format
 msgid "busmouse"
 msgstr "busmiš"
 
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "Account Login (user name)"
+msgstr "Korisničko ime"
 
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Miš (serijski, stari C7 tip)"
+msgid "Fdiv bug"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "MM Series"
-msgstr "MM Serije"
+msgid "Benin"
+msgstr "Benin"
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Uruguay"
+msgstr "Urugvaj"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Path selection"
+msgstr "Spremi odabir paketa"
 
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC serije"
+msgid "Name/IP address of host:"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+#: ../../partition_table/raw.pm:1
+#, fuzzy, c-format
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
+msgstr ""
+"Nešto loše se dešava sa vašim pogonom. \n"
+"Test za provjeru integriteta podataka je neuspješan. \n"
+"To znači da pisanje bilo čega na vaš disk rezultira slučajnim smećem"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP missing!"
+msgstr "Nedostaje ime računala od pisača!"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Generički miš s 3 gumba"
+msgid "Please check all users that you want to include in your backup."
+msgstr "Odaberite sve korisnike koje želite uključiti u pohranu."
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Generički miš s 2 gumba"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr ""
+"Ovaj %s skener mora podesiti printerdrake.\n"
+"Možete pokrenuti printerdrake iz Mandrake kontrolnog centra uHardver "
+"odjeljku."
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "serial"
-msgstr "serijski"
-
-#: ../../mouse.pm:1
-#, fuzzy, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft IntelliMouse"
+msgid "Bangladesh"
+msgstr "Bangladeš"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Wheel"
-msgstr "Kotačić"
+msgid "Japan (cable)"
+msgstr "Japan (kabl)"
 
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Generic"
-msgstr "Generički"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Initial tests"
+msgstr "Početni testovi"
 
-#: ../../mouse.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "Continue"
+msgstr "Nastavi"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generički PS2 miš s kotačićem"
+msgid "Custom Restore"
+msgstr "Prilagođena pohrana"
 
-#: ../../mouse.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr ""
 
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Standard"
-msgstr "Standardno"
+msgid "Script-based"
+msgstr "Temeljem skripta"
 
-#: ../../mouse.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
 #, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - miš"
+msgid "Error reading file %s"
+msgstr "Greška prilikom čitanja datoteke %s"
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "PLL setting:"
+msgstr "Postavka opterećenja"
+
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
 #, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Prebaci između ravno i grupno sortiranog"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Morate imati FAT particiju montiranu na /boot/efi"
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Collapse Tree"
-msgstr "Sažmi stablo"
+msgid " on "
+msgstr ""
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Expand Tree"
-msgstr "Proširi stablo"
+msgid "The URL must begin with http:// or https://"
+msgstr ""
 
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Info"
-msgstr "Info"
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
+msgstr ""
+"Možete izravno odrediti da URI pristupa pisaču. URI mora odgovarati oliCUPS "
+"ili Foomatic specifikacijama. Primjetite da nisu svi URI tipovi podržani od "
+"svih spoolera."
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Is this correct?"
-msgstr "Da li je ovo ispravno?"
+msgid "Other OS (SunOS...)"
+msgstr "Drugi OS (SunOS...)"
 
-#: ../../my_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
+msgid "Install/Upgrade"
+msgstr "Instaliraj/Nadogradi"
 
-#: ../../partition_table.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Error writing to file %s"
-msgstr "Greška prilikom pisanja u datoteku %s"
+msgid "%d packages"
+msgstr "%d paketa"
 
-#: ../../partition_table.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Bad backup file"
-msgstr "Loša backup datoteka"
+msgid ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default             : save default directories.\n"
+"--debug               : show all debug messages.\n"
+"--show-conf           : list of files or directories to backup.\n"
+"--config-info         : explain configuration file options (for non-X "
+"users).\n"
+"--daemon              : use daemon configuration. \n"
+"--help                : show this message.\n"
+"--version             : show version number.\n"
+msgstr ""
 
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Vraćanje iz datoteke %s nije uspjelo: %s"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain Authentication Required"
+msgstr "Provjera autentičnosti"
 
-#: ../../partition_table.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
 msgstr ""
-"Imate rupu u svojoj particijskoj tablici međutim ja je ne mogu iskoristiti.\n"
-"Jedino rješenje je da pomaknete vašu primarnu particiju kako bi rupa bila\n"
-"odmah do proširenih particija."
 
-#: ../../partition_table.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Proširene particije nisu podržane na ovoj platformi"
+msgid "Costa Rica"
+msgstr "Kosta Rika"
 
-#: ../../partition_table.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "mount failed: "
-msgstr "montiranje nije uspjelo: "
+msgid "Use libsafe for servers"
+msgstr "Koristi libsafe za poslužitelje"
 
-#: ../../pkgs.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "maybe"
-msgstr "možda"
+msgid "Icelandic"
+msgstr "Islandska"
 
-#: ../../pkgs.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "nice"
-msgstr "lijepo"
+msgid ""
+"\n"
+"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
 
-#: ../../pkgs.pm:1
+#: ../../standalone/XFdrake:1
 #, c-format
-msgid "very nice"
-msgstr "vrlo lijepo"
+msgid "Please relog into %s to activate the changes"
+msgstr "Molim ponovo se logirajte u %s kako bi aktivirali promjenjeno"
 
-#: ../../pkgs.pm:1
-#, c-format
-msgid "important"
-msgstr "važno"
+#: ../../my_gtk.pm:1
+#, fuzzy, c-format
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
 
-#: ../../pkgs.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "must have"
-msgstr "potrebno"
+msgid "Lilo/grub mode"
+msgstr "Lilo/grub mod"
 
-#: ../../raid.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nema dovoljno particija za RAID nivo %d\n"
+msgid "Output"
+msgstr "Ispis"
 
-#: ../../raid.pm:1
+#: ../../loopback.pm:1
 #, c-format
-msgid "mkraid failed"
-msgstr "mkraid nije uspio"
+msgid "Circular mounts %s\n"
+msgstr "Kružno montiranje %s\n"
 
-#: ../../raid.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid nije uspio (možda niste instalirali raidtools alate?)"
+msgid "Martinique"
+msgstr "Martinique"
 
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ne mogu dodati particiju na _formatirani_ RAID md%d"
+msgid "HardDrive / NFS"
+msgstr "Tvrdi disk / NFS"
 
-#: ../../services.pm:1
-#, c-format
-msgid "Stop"
-msgstr "Zaustavljanje"
+#: ../../modules/parameters.pm:1
+#, fuzzy, c-format
+msgid "a number"
+msgstr "Telefonski broj"
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Start"
-msgstr "Pokretanje"
+msgid "Swedish"
+msgstr "Švedska"
 
-#: ../../services.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "On boot"
-msgstr "Pri pokretanju"
+msgid "Which %s driver should I try?"
+msgstr "Koji %s upravljački program želite isprobati?"
 
-#: ../../services.pm:1
-#, c-format
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
 msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Nema dodatnih informacija\n"
-"o ovom servisu, žalim."
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr "Primit ćete upozorenje ako jedan od izabranih servisa više ne radi"
 
-#: ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Services and deamons"
-msgstr "Servisi i daemoni"
+msgid "Filesystem types:"
+msgstr "Vrste datotečnih sustava:"
 
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "stopped"
-msgstr "zaustavljen"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", multi-funkcionalan uređaj na HP JetDirectu"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "running"
-msgstr "pokrećem"
+msgid "Northern Mariana Islands"
+msgstr "Northern Mariana Islands"
 
-#: ../../services.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Izaberite koji servisi trebaju biti startani automatski kod boot-a"
+msgid "none"
+msgstr "niti jedan"
 
-#: ../../services.pm:1
-#, c-format
-msgid "Database Server"
-msgstr "Poslužitelj baza podataka"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user :"
+msgstr "Korisnik"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Remote Administration"
-msgstr "Udaljeno administriranje"
+msgid "Please enter your password"
+msgstr "Upišite svoju lozinku"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "File sharing"
-msgstr "Dijeljenje datoteka"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
+msgstr ""
+"Ime profila kojeg treba stvoriti (novi profil se stvara kao kopija "
+"trenutnog):"
 
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Floppy"
+msgstr "Spremi na disketu"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Naznačite da li prethodno želite obrisati vaš CDRW"
+
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Internet"
-msgstr "Internet"
+msgid "Ghostscript referencing"
+msgstr "Ghostscript reference"
 
-#: ../../services.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Bootloader"
+msgstr "Koristiti Bootloader"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Printing"
-msgstr "Ispisujem"
+msgid "Move"
+msgstr "Premjesti"
 
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Pokreće X Pismovni Poslužitelj (ovo je nužno za XFree da se pokrene)."
+msgid "Bootloader to use"
+msgstr "Koristiti Bootloader"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Učitava upravljačke programe za vaše usb uređaje."
+msgid "SMB server host"
+msgstr "SMB poslužitelj"
 
-#: ../../services.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "NIS Poslužitelj"
+
+#: ../../install_messages.pm:1
 #, c-format
 msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer,  duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
 msgstr ""
-"Syslog je resurs kojega koriste mnogi demoni kako bi logirali poruke\n"
-"u različite sustavske log datoteke. Dobra je ideja uvijek imati pokrenuti "
-"syslog."
+"\n"
+"Upozorenje\n"
+"\n"
+"Molimo pročitajte pažljivo činjenice niže. Ukoliko se ne slažete sa bilo\n"
+"kojim dijelom, nemate dozvolu instalirati slijedeći CD medij. Pritisnite "
+"'Odbij' \n"
+"za nastavak instalacije bez korištenja ovog medija.\n"
+"\n"
+"\n"
+"Neke komponente sadržane u slijedećem CD mediju nisu pokrivene\n"
+"GPL licencom ili sličnim ugovorom. Svaka takva komponenta je tada\n"
+"pokrivena stavkama i uvjetima svojim vlastitim specifičnim licencama. \n"
+"Molimo pročitajte pažljivo i složite se specifičnim licencama prije \n"
+"vašeg korištenja ili redistribuiranja navedenih komponenti. \n"
+"Takve licence općenito zabranjuju prijenos, dupliciranje \n"
+"(osim za spasonosne kopije), redistribuciju, reverzno inženjerstvo, \n"
+"disasembliranje, dekompilaciju ili promjenu komponente. \n"
+"Svako kršenje ugovora će odmah prekinuti vaša prava kod\n"
+"specifične licence. Ako vam stavke specifične licence ne odobre takva\n"
+"prava, obično ne možete instalirati programe na više od jednog\n"
+"sustava, ili prilagoditi ga za korištenje na mreži. Ako ste u nedoumici,\n"
+"kontaktirajte direktno distributera ili urednika komponente. \n"
+"Prijenos trećim osobama ili kopiranje takvih komponenti uključujući \n"
+"dokumentaciju je obično zabranjeno.\n"
+"\n"
+"\n"
+"Sva prava na komponente slijedećeg CD medija pripadaju njihovim \n"
+"uvaženim autorima i zaštićeni su intelektualnim vlasništvom i \n"
+"autorskim zakonima primjenjivim na software-ske programe.\n"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Pokreni zvučni sustav na vašem računalu"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Ukloni ovaj pisač iz StarOfficea/OpenOffice.org/GIMPa"
 
 #: ../../services.pm:1
 #, c-format
 msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
 msgstr ""
-"Rwho protokol omogućava udaljenim korisnicima da dobiju popis svih\n"
-"korisnika prijavljenih na računalo na kojima je pokrenut rwho (slično finger-"
-"u)."
+"Linux Virtualni Poslužitelj, koristi se za pravljenje visoko raspoloživog\n"
+"poslužitelja visokih performansi."
 
-#: ../../services.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Rusers protokol omogućava korisnicima na mreži da identificira tko je\n"
-"prijavljen na drugim računalima koja odgovaraju."
+msgid "4 billion colors (32 bits)"
+msgstr "4 milijarde boja (32 bita)"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Rstat protokol omogućava korisnicima na mreži da dohvate\n"
-"mjerljive performanse za svako računalo koje je na mreži."
+msgid "Micronesia"
+msgstr "Micronesia"
 
-#: ../../services.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed daemon omogućava automatsku IP ruter tablicu koja se obnavlja\n"
-"putem RIP protokola. Dok se RIP najšire koristi na malim mrežama, više "
-"kompleksniji\n"
-"ruting protokoli su potrebni za kompleksnije mreže."
-
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+msgid "License"
 msgstr ""
-"Dodjeljuje raw uređaje (kao što su hard disk\n"
-"particije), za uporabu u aplikacijama kao što su Oracle"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
+msgid "This may take a moment to generate the keys."
 msgstr ""
-"Sprema i vraća sustavsku entropiju za veću kvalitetu generiranja\n"
-"slučajnih brojeva."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
 msgstr ""
-"Postfix je Mail Transport Agent, što je program kojišalje mail-ove sa jednog "
-"računala na drugo."
 
-#: ../../services.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+msgid "Sagem (using pppoa) usb"
 msgstr ""
-"Portmapper uređuje RPC vezama, koje su korištene u protokolima\n"
-"poput NFS-a ili NIS-a. Portmap poslužitelj mora biti pokrenut na računalima\n"
-"koji su poslužitelji za protokole koji se služe RPC mehanizmima."
 
-#: ../../services.pm:1
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
 msgstr ""
-"PCMCIA podrška je obično za podržavanje stvari poput ethernet i\n"
-"modema u laptopima. Ona neće biti pokrenuta ukoliko nije tako\n"
-" konfigurirana zato je sigurno pokrenuti ju iako na instaliranom\n"
-" računalu ne treba."
+"Pojavila se greška - ne mogu pronaći niti jedan valjani uređaj na kojem\n"
+"bih mogao instalirati datotečni sustav. Provjerite da li je sa vašim "
+"hardverom sve u redu."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podržava OKI 4w i kompaktibilne win pisače."
+msgid "Starting the printing system at boot time"
+msgstr "Pokretanje ispisnog sustava prilikom podizanja sustava"
 
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatski uključuje numlock tipku u konzoli i\n"
-"XFree-u pri podizanju."
+msgid "Do you want to start the connection at boot?"
+msgstr "Da li želite pokreniti vašu vezu kod svakog podizanja (boot) sustava ?"
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
+msgid "Processor ID"
 msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka putem TCP/IP mreža.\n"
-"Ovaj servis pruža funkcionalnost NFS datotečnog zaključavanja."
 
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
+msgid "Sound trouble shooting"
 msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka putem TCP/IP mreža.\n"
-"Ovaj servis pruža NFS poslužiteljsku funkcionalnost, koji se konfigurira\n"
-"putem /etc/exports datoteke."
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivira/Deaktivira sva podešena mrežna sučelja prilikom pokretanja\n"
-"sustava."
+msgid "Polish (qwerty layout)"
+msgstr "Poljska (qwerty raspored)"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Montira i Demontira sve Mrežne datotečne sustave (NFS), SMB (Lan\n"
-"Manager/Windows), i NCP (NetWare) točke montiranja."
+msgid "activate now"
+msgstr "Aktiviraj sada"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
 msgstr ""
-"named (BIND) je Domain Name Server (DNS) poslužitelj koji se upotrebljava\n"
-"za razlučivanje imena računala u IP adrese."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
 msgstr ""
-"Linux Virtualni Poslužitelj, koristi se za pravljenje visoko raspoloživog\n"
-"poslužitelja visokih performansi."
+"Sada ćete instalirati ispisni sustav %s na sustav koji radi pod %s "
+"sigurnosnomrazinom.\n"
+"Ovaj ispisni sustav pokreće daemon (pozadinski proces) koji čeka na "
+"posloveispisa i rješava ih. Ovaj daemon je dostupan i udaljenim računalima "
+"prekomreže, te je tako moguće mjesto napada. Stoga se na ovoj sigurnosnoj "
+"razinisamo nekoliko izabranih daemona podrazumijevano pokreće.\n"
+"\n"
+"Da li stvarno želite namjestiti ispisivanje na ovom računalu?"
 
-#: ../../services.pm:1
-#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je daemon za ispis koji je potreban od lpr-a kako bi radio ispravno.\n"
-"On je pojednostavljeno poslužitelj koji šalje ispisne poslove pisaču(ima)."
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Host \"%s\", port %s"
+msgstr ", TCP/IP host \"%s\", port %s"
 
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf će ponekada urediti izvršavanje raznih radnji\n"
-"pri samom podizanju kako bi održao sustavsku konfiguraciju."
+msgid "This partition can't be used for loopback"
+msgstr "Ova particija se ne može koristiti za loopback"
 
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatska detekcija i konfiguracija hardware-a pri podizanju."
+msgid "File already exists. Use it?"
+msgstr "Datoteka već postoji. Da li da nju upotrijebim?"
 
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid "received: "
 msgstr ""
-"Automatsko regeneriranje kernel header-a u /boot za\n"
-"/usr/include/linux/{autoconf,version}.h"
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ovaj paket učitava odabranu tastaturnu mapu kao što je postavljenu u\n"
-"/etc/sysconfig/keyboard. Ona se može odabrati koristeći kbdconfig alat.\n"
-"Trebali biste ostaviti ovo uključeno za većinu računala."
+msgid "Right Alt key"
+msgstr "Desna Alt tipka"
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+msgid "the list of alternative drivers for this sound card"
 msgstr ""
-"Pokreće paketno filtriranje za Linux kernel 2.2 serije, za postavljanje\n"
-"vatrozida za zaštitu vašeg računala od mrežnih napada."
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver demon (najčešće zvan inetd) pokreće \n"
-"razne druge internet servise po potrebi. Odgovoran je za pokretanje \n"
-"mnogo servisa, uključujući telnet, ftp, rsh, i rlogin. Isključivanje inetd-"
-"a\n"
-"onemogučuje sve servise za koje je zadužen."
+msgid "Gateway"
+msgstr "Gateway"
 
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing"
+msgstr "Dijeljenje datoteka"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache je World Wide Web poslužitelj. Koristi se za posluživanje HTML\n"
-"dokumenata i CGI skripti."
+msgid "Tonga"
+msgstr "Tonga"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake pokreće isprobavanje hardware-a, i opciono konfigurira\n"
-"novi/promjenjeni hardware."
+msgid "Tunisia"
+msgstr "Tunis"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM dodaje podršku za mišu tekst baziranim Linux aplikacijama kao što je\n"
-"Midnight Commander. Također pruža miš baziranim konzolama odreži-i-zalijepi "
-"operacije,\n"
-"i uključuje podršku za iskočive menije u konzoli."
+msgid "Profile: "
+msgstr "Profil: "
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
+"Click on a device in the left tree in order to display its information here."
 msgstr ""
-"cron je standardan UNIX program koji pokreće korisnički definirane programe\n"
-"u periodično zakazana vremena. vixie cron dodaje veliki broj korisnih "
-"funkcija običnom UNIX cron-u, uključujući bolju sigurnost i veću snagu "
-"konfiguracijskih opcija."
 
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "XawTV isn't installed!"
 msgstr ""
-"Pokreće komande zakazane sa at komandom u specifirano vrijeme kada\n"
-"je at pokrenut, i pokreće batch komande kada je prosječna zauzetost dovoljno "
-"niska."
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"Create/Transfer\n"
+"backup keys for SSH"
 msgstr ""
-"apmd služi za monitoriranje statusa i baterije i njegovo logiranje putem "
-"syslog-a.\n"
-"Također može biti korišten za gašenje računala kada je baterija slaba."
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron periodno zakazivanje komandi"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Izostavi kritične datoteke (passwd, group, fstab)"
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Pokreni ALSA (Naprednu Linux Zvučnu Arhitekturu) zvučni sustav"
+msgid "old static device name used in dev package"
+msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Installing packages..."
-msgstr "Instaliram pakete..."
+msgid "This label is already used"
+msgstr "Ova oznaka već postoji"
 
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
+msgid "After formatting partition %s, all data on this partition will be lost"
 msgstr ""
+"Nakon formatiranja particije %s svi podaci na ovoj particiji biti će obrisani"
 
-#: ../../standalone.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection Time: "
+msgstr "Tip veze: "
+
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "select perm file to see/edit"
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../standalone/livedrake:1
 #, c-format
 msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-"  --no-verify-rpm        don't verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
 msgstr ""
+"Molimo ubacite Instalacijski Cd-Rom u vaš pogon i pritisnite U redu kada ste "
+"završili.\n"
+"Ukoliko ga nemate, pritisnite Odustani kako bi izbjegli živu nadogradnju."
 
-#: ../../standalone.pm:1
-#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr ""
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Use group id for execution"
+msgstr "Koristi auto detekciju"
 
-#: ../../standalone.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
+msgid "Choose the default user:"
+msgstr "Izaberite uobičajenog korisnika:"
 
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
+msgid "Gabon"
+msgstr "Gabon"
 
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "Tipkovnica"
-
-#: ../../standalone.pm:1
-#, c-format
 msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
 msgstr ""
+"\n"
+"Pisače na udaljenom CUPS poslužitelju ne morate konfiguriratiovdje; ti "
+"pisači će biti automatski pronađeni."
 
-#: ../../standalone.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"Font Importation and monitoring "
-"application                                     \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--strong         : strong verification of font.\n"
-"--install        : accept any font file and any directry.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr "Možete izabrati druge jezike koji će biti dostupni nakon instalacije"
 
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain"
+msgstr "NIS domena"
+
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of mandrake tools\n"
-"  --incident        - program should be one of mandrake tools"
-msgstr ""
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Precizna veličina RAMa (pronađeno %d MB)"
 
-#: ../../standalone.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
 "\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
-
-#: ../../standalone.pm:1
-#, fuzzy, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
 "\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
 "\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
 msgstr ""
-"Ovaj program je besplatni softver; možete ga redistribuirati i/ili "
-"mijenjati\n"
-"pod uvjetima GNU General Public License objavljenje od Free Software\n"
-"Foundationa; ili inačice 2, ili (kako izaberete) neke kasnije inačice.\n"
-"\n"
-"Ovaj program se distribuira u nadi da će biti koristan, ali\n"
-"BEZ IKAKVE GARANCIJE; bez čak i podrazumijevane TRŽIŠNE GARANCIJE\n"
-"ili POGODNOSTI ZA ODREĐENU SVRHU. Pogledajte\n"
-"GNU General Public License za više detalja.\n"
-"\n"
-"Trebali ste dobiti presliku GNU General Public License\n"
-"sa ovim programom; ako ne, pišite na Free Software Foundation,\n"
-"Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
 
-#: ../../steps.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Exit install"
-msgstr "Izlaz iz instalacije"
-
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Install updates"
-msgstr "Instaliraj dogradnje sustava"
+msgid "Provider dns 2 (optional)"
+msgstr "Pružateljev DNS 2 (opciono)"
 
-#: ../../steps.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Configure services"
-msgstr "Podešavanje servisa"
+msgid "Boot device"
+msgstr "Boot uređaj"
 
-#: ../../steps.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Configure X"
-msgstr "Podesi X"
+msgid "Which partition do you want to resize?"
+msgstr "Kojoj particiji želite promijeniti veličinu?"
 
-#: ../../steps.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Install bootloader"
-msgstr "Instaliraj bootloader"
+msgid "United States Minor Outlying Islands"
+msgstr "United States Minor Outlying Islands"
 
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Configure networking"
-msgstr "Podesi mrežu"
+msgid "A tool to monitor your logs"
+msgstr "Alat za nadziranje logova"
 
-#: ../../steps.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Add a user"
-msgstr "Dodaj korisnika"
+msgid "Djibouti"
+msgstr "Đibuti"
 
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Root password"
-msgstr "Bez lozinke"
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "detected on port %s"
+msgstr "detektiran na portu %s"
 
-#: ../../steps.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Install system"
-msgstr "Instaliraj sustav"
+msgid "LPD"
+msgstr "LPD"
 
-#: ../../steps.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Choose packages to install"
-msgstr "Izabir instaliranih paketa"
+msgid "Graphics card: %s\n"
+msgstr "Grafička kartica: %s\n"
 
-#: ../../steps.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Format partitions"
-msgstr "Formatiraj particije"
+msgid "Yaboot"
+msgstr "Yaboot"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Partitioning"
-msgstr "Ispisujem"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Naznačite da li koristite CDRW medij"
 
-#: ../../steps.pm:1
-#, c-format
-msgid "Choose your keyboard"
-msgstr "Odaberite tipkovnicu"
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Splash selection"
+msgstr "Spremi odabir paketa"
 
-#: ../../steps.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Select installation class"
-msgstr "Odaberite razred instalacije"
+msgid "Extended partition not supported on this platform"
+msgstr "Proširene particije nisu podržane na ovoj platformi"
 
-#: ../../steps.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Hard drive detection"
-msgstr "Otkrivanje hard diskova"
+msgid "ISDN Configuration"
+msgstr "ISDN postavke"
 
-#: ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Configure mouse"
-msgstr "Podesi miš"
+msgid "high"
+msgstr "Visoka"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "License"
-msgstr ""
+msgid "Internet Connection Sharing"
+msgstr "Dijeljenje Internet Veze"
 
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Language"
-msgstr "Odaberite jezik"
+msgid "Choose file"
+msgstr "Izaberite datoteku"
 
-#: ../../ugtk2.pm:1
+#: ../../network/shorewall.pm:1
 #, c-format
-msgid "utopia 25"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
 msgstr ""
+"Upozorenje! Postojeća vatrozidna konfiguracija je pronađena. Morati ćete "
+"ručno popraviti neke dijelove nakon instalacije."
 
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "OK"
-msgstr "U redu"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Ispis/skeniranje na \"%s\""
 
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
+msgstr ""
 
-#: ../../ugtk.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "Izabir modela pisača"
+
+#: ../../mouse.pm:1
 #, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Generički PS2 miš s kotačićem"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing old printer \"%s\"..."
+msgstr "Uklanjam stari pisač \"%s\" ..."
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "Odaberite skener"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "Ukloni izabrano"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalacijski zaslonski upravljački program)"
+msgid "French Southern Territories"
+msgstr "Francuski južni teritoriji"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgid "the vendor name of the processor"
 msgstr ""
-"Vaša kartica može imati 3D hadware akceleraciju podržanu od XFree %s,\n"
-"UPOZORAVAMO VAS DA JE OVO EKSPERIMENTALNA PODRŠKA I MOŽE ZAMRZNUTI VAŠE "
-"RAČUNALO."
 
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s sa EXPERIMENTALNOM 3D hardware akceleracijom"
+msgid "All data on this partition should be backed-up"
+msgstr "Preporučam da prvo backupirate sve podatke s ove particije"
 
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Vaša kartica može imati 3D hardware-sku akceleraciju sa XFree %s."
+msgid "Installing package %s"
+msgstr "Instaliram paket %s"
 
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s sa 3D hardware akceleracijom"
+msgid "Checking device and configuring HPOJ..."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
 msgstr ""
-"Vaša video kartica može imati 3D ubrzanje samo sa XFree %s,\n"
-"UPOZORAVAMO VAS DA JE OVO EKSPERIMENTALNA PODRŠKA I MOŽE ZAMRZNUTI VAŠE "
-"RAČUNALO.Vaša kartica je podržana od XFree %s koja može imati bolju podršku "
-"u 2D."
+"Ako želite dodati još koju particiju molim obrišite jednu od particija kako "
+"bi\n"
+"mogli stvoriti jednu extended particiju."
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
 msgstr ""
-"Vaša video kartica može imati 3D ubrzanje samo sa XFree %s.\n"
-"Vaša kartica je podržana od XFree %s koji možda ima bolju podršku u 2D."
 
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Podesi samo karticu \"%s\" (%s)"
+msgid "Choose packages to install"
+msgstr "Izabir instaliranih paketa"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use Xinerama extension"
-msgstr "Koristi Xinerama proširenje"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
+"\n"
+"Neke greške tijekom slanja pošte su uzrokovane \n"
+" lošim postavkama postfixa. Da bi ih riješili, morate\n"
+" namjesiti myhostname ili mydomain u /etc/postfix/main.cf\n"
+"\n"
 
-#: ../../Xconfig/card.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Configure all heads independently"
-msgstr "Podesi sve zaslone nezavisno"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "SVE postojeće particije i podaci biti će izgubljeni na disku %s"
 
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Koju konfiguraciju XFree-a želite imati?"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"Vaš sustav nema dovoljno prostora za instalaciju ili dogradnju (%d > %d)"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "XFree configuration"
-msgstr "XFree postavke"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Svaki pisač treba ime (na primjer \"pisač\").Polja opisa i lokacije ne "
+"moraju biti popunjena. To su komentari za korisnike."
 
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Odaberite količinu memorije na grafičkoj kartici"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
 msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
 msgstr ""
-"Vaš sustav podržava postavu sa više zaslona.\n"
-"Što želite napraviti?"
 
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Multi-head configuration"
-msgstr "Više-zaslonska postava"
+msgid "Bhutan"
+msgstr "Butan"
 
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "Odaberite X poslužitelj"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Network interface"
+msgstr "Mrežni međusklop"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "X server"
-msgstr "X poslužitelj"
+msgid "Reading printer data..."
+msgstr "Čitam podatke o pisaču ..."
 
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "64 MB or more"
-msgstr "64 MB ili više"
+msgid "Korean keyboard"
+msgstr "Korejska tipkovnica"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Not connected"
+msgstr "Nije povezan"
 
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Greek"
+msgstr "Grčka"
 
-#: ../../Xconfig/card.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "Saint Kitts and Nevis"
+msgstr "Saint Kitts and Nevis"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Enable OF Boot?"
+msgstr "Omogući podizanje?"
 
-#: ../../Xconfig/card.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "JFS se ne može koristiti na particijama koje su manje od 16 MB"
 
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Vertikalno Osvježenje Monitora: %s\n"
 
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+msgid "path"
 msgstr ""
-"Zadrži promjene?\n"
-"Trenutna postava je:\n"
-"\n"
-"%s"
 
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Options"
-msgstr "Opcije"
+msgid "Mount point"
+msgstr "Točka montiranja"
 
-#: ../../Xconfig/main.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid "Test"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
 msgstr ""
 
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Resolution"
-msgstr "Rezolucija"
+msgid "Restore system"
+msgstr "Povrati sustav"
 
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Monitor"
-msgstr "Monitor"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
 
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid "The DHCP end ip"
+msgstr ""
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, fuzzy, c-format
-msgid "Graphic Card"
-msgstr "Grafička kartica"
+msgid "Another one"
+msgstr "Internet"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Vertical refresh rate"
-msgstr "Vertikalna vrijednost osvježavanja"
+msgid "Drakbackup"
+msgstr "Drakbackup"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Horizontal refresh rate"
-msgstr "Horizontalna vrijednost osvježavanja"
+msgid "Colombia"
+msgstr "Kolumbija"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
+"Current configuration of `%s':\n"
 "\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
 msgstr ""
-"Dva kritična parametra su vertikalna vrijednost osvježavanja, koja je "
-"vrijednost\n"
-"u kojoj se cijeli zaslon osvježava, i najvažnije horizontalna\n"
-"vrijednost osvježavanja koja ja vrijednost u kojoj se svaka linija "
-"prikazuje.\n"
+"Trenutne postavke '%s':\n"
 "\n"
-"JAKO JE VAŽNO da ne specifirate tip monitora kod kojega je raspon "
-"osvježavanja\n"
-"veći od mogućnosti vašeg monitora jer možete oštetiti vaš monitor.\n"
-" Ukoliko ste u nedoumici, izaberite konzervativne postavke."
-
-#: ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr ""
-
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Vendor"
-msgstr "Vrati"
+"Mreža: %s\n"
+"IP adresa: %s\n"
+"IP atribut: %s\n"
+"Pokretački program: %s"
 
 #: ../../Xconfig/monitor.pm:1
 #, c-format
 msgid "Plug'n Play"
 msgstr ""
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose a monitor"
-msgstr "Odaberite monitor"
+msgid "Reunion"
+msgstr "Reunion"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Graphics card: %s"
-msgstr "Grafička kartica: %s"
+msgid "Details"
+msgstr "Detalji"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Odaberite rezoluciju  i color depth"
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "For security reasons, it will be disconnected now."
+msgstr "Zbog sigurnosnih razloga, biti će sada odspojen."
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Resolutions"
-msgstr "Rezolucije"
+msgid "Synchronization tool"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijarde boja (32 bita)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Checking your system..."
+msgstr "Ponovno pokrećem ispisni sutav ..."
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 milijuna boja (24 bita)"
+msgid "Print"
+msgstr "Ispiši"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tisuća boja (16 bita)"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tisuća boja (15 bita)"
+msgid "Mongolia"
+msgstr "Mongolija"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 boja (8 bita)"
+msgid "Mounted\n"
+msgstr "Montiran\n"
 
-#: ../../Xconfig/test.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "Da li je ovo ispravno?"
+msgid "Graphical Interface"
+msgstr "X kod pokretanja sustava"
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore Users"
+msgstr "Povrati korisnike"
+
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d sekundi"
+msgid "Encryption key for %s"
+msgstr "Enkripcijski ključ"
 
-#: ../../Xconfig/test.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
 msgstr ""
+"Portmapper uređuje RPC vezama, koje su korištene u protokolima\n"
+"poput NFS-a ili NIS-a. Portmap poslužitelj mora biti pokrenut na računalima\n"
+"koji su poslužitelji za protokole koji se služe RPC mehanizmima."
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Upozorenje: testiranje grafičke kartice može zamrzunti vaše računalo"
+msgid "Detected hardware"
+msgstr "Pokaži info o hardveru"
 
-#: ../../Xconfig/test.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Da li želite iskušati postavu ?"
+msgid "Mauritius"
+msgstr "Mauritius"
 
-#: ../../Xconfig/test.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Test of the configuration"
-msgstr "Iskušaj postavu"
+msgid "Myanmar (Burmese)"
+msgstr ""
 
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
 #, fuzzy, c-format
-msgid "What norm is your TV using?"
-msgstr "Kakav tip ISDN veze koristite ?"
+msgid "Enabling swap partition %s"
+msgstr "Formatiram particiju %s"
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Nema FAT particije za mjenjanje veličine ili za korištenje loopback-a (ili "
+"nema dovoljno prostora)"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (old)"
+msgstr "Armenska (stara)"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
 msgstr ""
+"Pisač \"%s\" već postoji na %s.\n"
+"Stisnite \"Prebaci\" da prepišete preko njega.\n"
+"Možete i upisati novo ime ili preskočiti ovaj pisač."
 
-#: ../../Xconfig/various.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
 msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
 msgstr ""
-"Mogu podesiti da se X podigne automatski kod podizanja sustava.\n"
-"Da li želite da se X automatski pokreće?"
 
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "X kod pokretanja sustava"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ", host \"%s\", port %s"
+msgstr ", TCP/IP host \"%s\", port %s"
 
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 upravljački program: %s\n"
+msgid "Monaco"
+msgstr "Monako"
 
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 poslužitelj: %s\n"
+msgid "%s formatting of %s failed"
+msgstr "%s formatiranje %s nije uspjelo"
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolucija: %s\n"
+msgid "Partitioning failed: %s"
+msgstr "Particioniranje neuspjelo: %s"
 
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Color depth: %s\n"
-msgstr "Dubina boje: %s\n"
+msgid "Canada (cable)"
+msgstr "Kanada (kabl)"
 
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Grafička memorija: %s kB\n"
+msgid "Upgrade"
+msgstr "Dogradnja"
 
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Graphics card: %s\n"
-msgstr "Grafička kartica: %s\n"
+msgid "Workstation"
+msgstr "Radna stanica"
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Vertikalno Osvježenje Monitora: %s\n"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Instaliram paket %s\n"
+"%d%%"
 
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Horizontalna Sinkronizacija Monitora: %s\n"
+msgid "Kyrgyzstan"
+msgstr "Kyrgyzstan"
 
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Sa osnovnom dokumentacijom (preporučeno!)"
 
-#: ../../Xconfig/various.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Mouse device: %s\n"
-msgstr "Uređaj miša: %s\n"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron periodno zakazivanje komandi"
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Mouse type: %s\n"
-msgstr "Vrsta miša: %s\n"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Morate imati root particiju.\n"
+"Prvo napravite particiju (ili kliknite na postojeću) te\n"
+"odaberite akciju ``Mjesto monitranja'' te odaberite `/'"
 
-#: ../../Xconfig/various.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Raspored tipkovnice: %s\n"
+msgid "Proxy should be http://..."
+msgstr "Proxy treba biti http://..."
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Options: %s"
-msgstr "Opcije: %s"
+msgid "South Africa"
+msgstr "Južna Afrika"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Mount point: "
-msgstr "Mjesto montiranja:"
-
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid "Server: "
-msgstr "Poslužitelj"
+msgid "Western Sahara"
+msgstr "Zapadna Sahara"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "The URL must begin with http:// or https://"
+msgid "Etherboot Floppy/ISO"
 msgstr ""
 
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Upišite brzinu cd snimača"
-
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Mount point"
-msgstr "Točka montiranja"
+msgid "Modify printer configuration"
+msgstr "Promijeni postavke pisača"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Server"
-msgstr "Poslužitelj"
+msgid "Choose a partition"
+msgstr "Izaberite particiju"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Mount"
-msgstr "Montiraj"
+msgid "Edit current rule"
+msgstr ""
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Unmount"
-msgstr "Demontiraj"
-
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid "New"
-msgstr "novi"
+msgid "%s"
+msgstr ""
 
-#: ../../diskdrake/dav.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
 msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Use ``%s'' instead"
-msgstr "Umjesto toga koristi ``%s''"
+msgid "Please test the mouse"
+msgstr "Molimo istestirajte miša."
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Type"
-msgstr "Vrsta"
+msgid "Other Media"
+msgstr "Ostali mediji"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Prvo pritisnite ``Demontiraj''"
+msgid "Backup system files"
+msgstr "Pohrani sustavske datoteke"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Delete"
-msgstr "Obriši"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Create"
-msgstr "Napravi"
+msgid "Sector"
+msgstr "Sektor"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Filesystem types:"
-msgstr "Vrste datotečnih sustava:"
+msgid "Qatar"
+msgstr "Qatar"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Empty"
-msgstr "Prazno"
+msgid "LDAP Base dn"
+msgstr "LDAP Base dn"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"Ne možete označiti ovaj paket budući da nema dovoljno mjesta gdje ga se može "
+"instalirati"
+
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Windows"
-msgstr "Dobavi Windows fontove"
+msgid "generate auto-install floppy"
+msgstr "Napravi auto instalacijsku disketu"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Dialing mode"
+msgstr "Način biranja"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "File sharing"
+msgstr "Dijeljenje datoteka"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Swap"
-msgstr "Swap"
+msgid "Clean /tmp at each boot"
+msgstr "Očisti /tmp na svakom podizanju"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
+msgid "Malawi"
+msgstr "Malawi"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Please choose your type of mouse."
+msgstr "Molim izaberite vašu vrstu miša."
 
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "No hard drives found"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "class of hardware device"
 msgstr ""
-"Nije pronađen lokalni pisač!\n"
-"\n"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please click on a partition"
-msgstr "Molim kliknite na particiju"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
 msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
 msgstr ""
-"Vaš sustav sadrži samo jednu veliku particiju.\n"
-"(Microsoft DOS/Windows obično koristi jednu particiju).\n"
-"Preporučam da promijenite veličinu particije\n"
-"(kliknite prvo na particiju te onda na \"Promijeni veličinu\")"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Choose action"
-msgstr "Izaberite akciju"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Wizard"
-msgstr "Čarobnjak"
+msgid "United Kingdom"
+msgstr "Ujedinjeno Kraljevstvo"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ukoliko želite koristiti aboot morate ostaviti dovoljno mjesta (npr. 2048 "
-"sektora) na\n"
-"početku diska"
+msgid "running"
+msgstr "pokrećem"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Please make a backup of your data first"
-msgstr "Prvo napravite backup podataka"
+msgid "default"
+msgstr "uobičajeno"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Read carefully!"
-msgstr "Pročitajte pažljivo!"
+msgid "Indonesia"
+msgstr "Indonezija"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Encryption key (again)"
-msgstr "Enkripcijski ključ (ponovno)"
+msgid "France [SECAM]"
+msgstr "Francuska [SECAM]"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Encryption key"
-msgstr "Enkripcijski ključ"
+msgid "restrict"
+msgstr "ograniči"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "The encryption keys do not match"
-msgstr "Enkripcijski ključevi se ne slažu"
+msgid "must have"
+msgstr "potrebno"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
 msgstr ""
-"Upisani enkripcijski ključ je prejednostavan (mora biti dug najmanje %d "
-"znakova)"
+"CUPS ne podržava pisače na Novell poslužiteljima ili pisače koji "
+"šaljupodatke u naredbu slobodne forme.\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Izaberite vaš ključ za enkriptiranje datotečnog sustava"
+msgid "Senegal"
+msgstr "Senegal"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Filesystem encryption key"
-msgstr "Ključ enkriptiranja datotečnog sustava"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Command line"
+msgstr "Ime domene"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
+#, fuzzy, c-format
+msgid ""
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
+msgstr ""
+"Potpun raspon Linux rješenja, kao i posebne ponude proizvoda i 'goodiesa', "
+"sudostupni online preko naše e-trgovine"
+
+#: ../../any.pm:1
 #, c-format
-msgid "Type: "
-msgstr "Vrsta: "
+msgid "access to administrative files"
+msgstr "pristup administracijskim datotekama"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "on channel %d id %d\n"
-msgstr "na sabirnici %d id %d\n"
+msgid ""
+"Error during sendmail.\n"
+"  Your report mail was not sent.\n"
+"  Please configure sendmail"
+msgstr ""
+"Greška tijekom slanja pošte\n"
+"  vaš mail sa izvještajem nije poslan\n"
+"  molimo podesite sendmail"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", multi-funkcionalan uređaj na paralelnom portu \\/*%s"
+
+#: ../../security/help.pm:1
 #, c-format
-msgid "Partition table type: %s\n"
-msgstr "Vrsta particijske tabele: %s\n"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskovi %s\n"
+msgid "Montserrat"
+msgstr "Montserrat"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Info: "
-msgstr "Info: "
+msgid "Automatic dependencies"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"
+msgid "Swap"
+msgstr "Swap"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connecting to the Internet "
+msgstr "Spoji se na Internet"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Size: %s\n"
-msgstr "Veličina: %s\n"
+msgid "Restore Other"
+msgstr "Povrati ostalo"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Read-only"
-msgstr ""
+msgid "TV card"
+msgstr "TV kartica"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Device: "
-msgstr "Uređaj:"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Pisač na SMB/Windows 95/98/NT poslužitelju"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid ", "
+msgstr ""
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (umask)\n"
 "\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+"Set the root umask."
 msgstr ""
-"\n"
-"Ova specijalna bootstrap\n"
-"particija je za\n"
-"dvostruko-podizanje (dual-boot) vašeg sustava.\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
+msgid "Remove selected host/network"
+msgstr "Ukloni izabrano"
+
+#: ../../services.pm:1
+#, c-format
 msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
 msgstr ""
-"\n"
-"Šanse su, da je ova particija\n"
-"ustvari particija upravljačkog programa, vjerojatno\n"
-"biste ju trebali ostaviti.\n"
+"Postfix je Mail Transport Agent, što je program kojišalje mail-ove sa jednog "
+"računala na drugo."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Loopback file name: %s"
-msgstr "Ime loopback datoteke: %s"
+msgid "Disconnection from the Internet failed."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskovi %s\n"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Chunk veličina %s\n"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "Mrežne postavke"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Level %s\n"
-msgstr "Razina %s\n"
+msgid "if set to yes, reports check result to tty."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From CD"
+msgstr "Povrati s tvrdog diska"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
 msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
 msgstr ""
-"Podrazumijevana boot particija\n"
-"  (za MS-DOS boot, ne za LILO)\n"
+"Vaše računalo može biti konfigurirano da dijeli vlastitu Internet vezu.\n"
+"Sa tom značajkom, druga računala na vašoj lokalnoj mreži mogu koristiti "
+"Internet vezu ovog računala.\n"
+"\n"
+"Upozorenje: trebati ćete primjenjeni Mrežni Uređaj za postavljanje lokalne "
+"mreže (LAN)."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
 msgid ""
-"Loopback file(s):\n"
-"   %s\n"
+"Please choose which network adapter you want to use to connect to Internet."
 msgstr ""
-"Loopback datoteka(e):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+"Molimo izaberite sa kojim mrežnim adapterom se želite priključiti na Internet"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Mounted\n"
-msgstr "Montiran\n"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
 #, c-format
-msgid "Not formatted\n"
-msgstr "Nije formatiran\n"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Formatted\n"
-msgstr "Formatiran\n"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Dijeljenje veze prema Internetu je trenutno onemogućeno."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindar %d do %d\n"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ", %s sectors"
-msgstr ", %s sektora"
+msgid "Latin American"
+msgstr "Latino američka"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size: %s"
-msgstr "Veličina: %s"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "Promijeni ispisni sustav"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Početak: sektor %s\n"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Old device file"
+msgstr "Odaberite datoteku"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Name: "
-msgstr "Ime: "
+msgid "Info: "
+msgstr "Info: "
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS uređaj slovo: %s (nagađanje)\n"
+msgid "Button `%s': %s"
+msgstr "Gumb `%s': %s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "partition %s is now known as %s"
-msgstr "particija %s je sada poznata kao %s"
+msgid "Please wait"
+msgstr "Molim pričekajte"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Removing %s"
-msgstr "Uklanjam %s"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Copying %s"
-msgstr "Kopiram %s"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "None"
+msgstr "Gotov"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Moving files to the new partition"
-msgstr "Premiješteam datoteke na novu particiju"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "Model je točan"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"Direktorij %s već sadrži neke podatke\n"
-"(%s)"
+msgid "Ethernet Card"
+msgstr "Ethernet kartica"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Hide files"
-msgstr "Sakrij datoteku"
+msgid "Info"
+msgstr "Info"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Move files to the new partition"
-msgstr "Premijesti datoteku na novu particiju"
+msgid "Install"
+msgstr "Instaliraj"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
 msgstr ""
-"Nakon formatiranja particije %s svi podaci na ovoj particiji biti će obrisani"
+"Izaberite \"U redu\" ukoliko želite obrisati sve podatke i\n"
+"postojeće particije na navedenom tvrdom disku. Budite pažljivi, nakon\n"
+"klikanja na \"U redu\", nećete moći povratiti bilo kakve postojeće podatke "
+"ili\n"
+"particije na ovom hard disku, uključujući Windows podatke.\n"
+"\n"
+"Pritisnite na \"Odustani\" za prekidanje ove operacije bez gubljenja bilo\n"
+"kakvih postojećih podataka i particija na ovom hard disku."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Trebate ponovo pokrenuti sustav prije nego promjene postanu aktivne"
+msgid "Exit install"
+msgstr "Izlaz iz instalacije"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Particijska tablica pogona %s će sada biti zapisana na disk!"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Paket %s treba instalirati. Da li ga želite instalirati?"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
+msgstr ""
+"Sve je konfigurirano.\n"
+"Sada možete dijeliti vašu internet vezu sa drugim računalima na vašoj "
+"lokalnoj mreži, koristeći automatsku mrežnu konfiguraciju (DHCP)."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "What type of partitioning?"
-msgstr "Kakav tip particioniranja?"
+msgid "Remote CUPS server"
+msgstr "Udaljeni CUPS poslužitelj"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Budite oprezni: ova operacija je opasna"
+msgid "Sun - Mouse"
+msgstr "Sun - miš"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "chunk size"
-msgstr "chunk veličina"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"Postoji samo jedan konfigurirani mrežni adapter na vašem sustavu:\n"
+"\n"
+"%s\n"
+"\n"
+"Postaviti ću lokalnu mrežu (LAN) sa tim adapterom."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "level"
-msgstr "razina"
+msgid "Minimal install"
+msgstr "Minimalna instalacija"
 
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
 #, c-format
-msgid "device"
-msgstr "uređaj"
+msgid "Ethiopia"
+msgstr "Etiopija"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Various"
-msgstr "Razno"
+msgid "Devanagari"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Mount options"
-msgstr "Opcije montiranja"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "File already exists. Use it?"
-msgstr "Datoteka već postoji. Da li da nju upotrijebim?"
+msgid "Total size: %d / %d MB"
+msgstr "Ukupna veličina: %d / %d MB"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr ""
-"Datoteku koristi neki drugi loopback. Molim izaberite neku drugu datoteku"
+msgid "disabled"
+msgstr "onemogući"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Give a file name"
-msgstr "Dajte ime datoteke"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Search for new scanners"
+msgstr "Lokalni pisač"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Filesystem type: "
-msgstr "Vrsta datotečnog sustava:"
+msgid "Disabling servers..."
+msgstr "Onemogućujem poslužitelje..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Size in MB: "
-msgstr "Veličina u MB:"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"Izaberite vremenski razmak između\n"
+"dvije sigurnosne pohrane"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Loopback file name: "
-msgstr "Ime loopback datoteke:"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Instalacija %s-a nije uspjela. Prijavljena je slijedeća grešska:"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Ova particija se ne može koristiti za loopback"
+#: ../../install_any.pm:1
+#, fuzzy, c-format
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Izabrali ste slijedeće poslužitelje: %s\n"
+"\n"
+"\n"
+"Ti poslužitelji biti će postavljeno aktivirani. Oni nemaju poznatih "
+"sigurnosnih\n"
+"propusta, ali neki novi mogu biti pronađeni. U tom slučaju, morate ga "
+"nadograditi\n"
+"što prije moguće.\n"
+"\n"
+"\n"
+"Da li zaista želite instalirati te poslužitelje?\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "LVM name?"
-msgstr "LVM ime?"
+msgid "Network printer (TCP/Socket)"
+msgstr "Mrežni pisač (TCP/socket)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "new"
-msgstr "novi"
+msgid "Backup User files..."
+msgstr "Sigurnosna pohrana korisničkih datoteka"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Izaberite postojeći LVM na koji želite dodati "
+msgid "Install system"
+msgstr "Instaliraj sustav"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Izaberite postojeći RAID na koji želite dodati "
+msgid "First DNS Server (optional)"
+msgstr "Prvi DNS poslužitelj (opciono)"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Moving partition..."
-msgstr "Premještam particiju..."
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
+"Izaberite port preko kojeg je vaš pisač povezan ili upišite ime uređaja/"
+"datotekeu liniju za unos."
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Moving"
-msgstr "Premještam"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "dhcpd Config..."
+msgstr "Podešavam..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Na koji se sektor želite premjestiti?"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "Postavljanje je već urađeno, ali je trenutno onemogućeno."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Sector"
-msgstr "Sektor"
+msgid "LILO/grub Installation"
+msgstr "LILO/grub instalacija"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Na koji disk se želite premjestiti?"
+msgid "Israeli"
+msgstr "Izraelska"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Move"
-msgstr "Premjesti"
+msgid "load setting"
+msgstr "Postavka opterećenja"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "New size in MB: "
-msgstr "Nova veličina u MB: "
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Ispis na pisaču \"%s\""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Choose the new size"
-msgstr "Odaberite novu veličinu"
+msgid "Floppy can be removed now"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Resize"
-msgstr "Promijeni veličinu"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Minimalna instalacija"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon mijenjanja veličine particije %s svi podaci na ovoj particiji biti će "
-"izgubljeni"
+msgid "Denmark"
+msgstr "Danska"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Preporučam da prvo backupirate sve podatke s ove particije"
+msgid "Moving partition..."
+msgstr "Premještam particiju..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "This partition is not resizeable"
-msgstr "Ova particija nije promjenjiva u veličini"
+msgid "(This) DHCP Server IP"
+msgstr "IP (ovog) DHCP poslužitelja"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Izračunavam granice fat datotečnog sustava"
+msgid "Test of the configuration"
+msgstr "Iskušaj postavu"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Gdje želite montirati uređaj %s?"
+msgid "Installing %s ..."
+msgstr "Instaliram pakete..."
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
 msgstr ""
-"Ne mogu maknuti točku za montiranje zato što se ova particija koristi za "
-"loop back.\n"
-"Uklonite loopback prvo"
+"Konačno, ovisno o tome da li ste izbrali individualne pakete, prikazat će "
+"vam \n"
+"se stablo sa svim paketima podijeljenim u grupe i podgrupe. Pri "
+"pregledavanju\n"
+"stabla možete izabrati čitave grupe, podgrupe ili pojedine pakete.\n"
+"\n"
+"Kad god izaberet paket na stablu, na desnoj strani se pojavi opisnik. Kada "
+"ste\n"
+"završili odabir, pritisnite \"Instaliraj\", čime ćete pokrenuti proces "
+"instaliranja.\n"
+"Ovisno o brzini računala i broju paketa koji trebaju biti instalirani, "
+"proces može\n"
+"potrajati. Procjena vremena koje će biti potrebno da bi se sve instaliralo "
+"piše\n"
+"na ekranu, da vam pomogne procjeniti imate li vremena za šalicu kave.\n"
+"\n"
+"!! Ako je odabran poslužiteljski paket, namjerno ili jer je pripadao nekoj "
+"grupi,\n"
+"bit ćete upitani da potvrdite da li želite stvarno instalirati te "
+"poslužitelje.\n"
+"Kod Mandrake Linuxa, svi instalirani poslužitelji se pokreću prilikom "
+"podizanja\n"
+"sustava. Čak iako su sigurni, bez poznatih problema u vrijeme izlaska "
+"distribucije,\n"
+"može se dogoditi da se otkriju sigurnosne rupe nakon zgotovljenja ove "
+"inačice\n"
+"Mandrake Linuxa. Ako ne znate što bi pojedini servis trebao raditi ili "
+"zašto \n"
+"se instalira, pritisnite \"Ne\". Pritiskanjem na \"Da\"instalirat će se "
+"navedeni\n"
+"servisi i pokretat će se automatski. !!\n"
+"\n"
+"\"Automatske ovisnosti\" opcija onemogućuje upozorenje koje se pojavi kad "
+"god \n"
+"instalacija automatski izabere paket. Ovo se dešava stoga što je utvrdila "
+"da\n"
+"treba zadovoljiti ovisnost drugim paketom da bi se uspješno završila.\n"
+"\n"
+"Malena ikona diskete na dnu popisa omogućuje učitavanje popisa paketa "
+"izabranih\n"
+"tijekom neke prošle instalacije. Pritiskom na nj upitat će vas da ubacite "
+"disketu\n"
+"napravljenu na kraju neke druge instalacije. Pogledajte drugi savjet u "
+"posljednjem\n"
+"koraku stvaranja takve diskete."
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Gdje želite montirati uređaj %s?"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Gdje želite montirati loopback datoteku %s?"
+msgid "Choose your filesystem encryption key"
+msgstr "Izaberite vaš ključ za enkriptiranje datotečnog sustava"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Mijenjam iz ext2 u ext3"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Which filesystem do you want?"
-msgstr "Koji datotečni sustav želite?"
+msgid "Andorra"
+msgstr "Andora"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Change partition type"
-msgstr "Mijenjam tip particije"
+msgid "Sierra Leone"
+msgstr "Sierra Leone"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon mijenjanja tipa particije %s svi podaci na ovoj particiji biti će "
-"obrisani"
+msgid "Botswana"
+msgstr "Bocvana"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "(default value: %s)"
+msgstr " (Uobičajeno)"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remove the loopback file?"
-msgstr "Ukloniti loopback datoteku?"
+msgid "Alternative test page (Letter)"
+msgstr "Alternativna testna stranica (Letter)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Preference: "
-msgstr "Postavke:"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Start sector: "
-msgstr "Početni sektor:"
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Choose an X server"
+msgstr "Odaberite X poslužitelj"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Create a new partition"
-msgstr "Stvori novu particiju"
+msgid "Swap partition size in MB: "
+msgstr "Veličina swap particiju u MB: "
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use for loopback"
-msgstr "Koristi za loopback"
+msgid ""
+"Other (not drakbackup)\n"
+"keys in place already"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Modify RAID"
-msgstr "Promijeni RAID"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No changes to backup!"
+msgstr "Koristi vrpcu za pohranu"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Remove from LVM"
-msgstr "Ukloni sa LVM-a"
+msgid "Formatted\n"
+msgstr "Formatiran\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Remove from RAID"
-msgstr "Ukloni sa RAID-a"
+msgid "Type of install"
+msgstr "Tip instalacije"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Add to LVM"
-msgstr "Dodaj LVM-u"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Pisač na SMB/Windows 95/98/NT poslužitelju"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Add to RAID"
-msgstr "Dodaj RAID-u"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
+"\n"
+"- Daemon (%s) uključi :\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "Format"
-msgstr "Formatiraj"
+msgid "%d comma separated numbers"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Detailed information"
-msgstr "Detaljne informacije"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
+msgstr ""
+"Rusers protokol omogućava korisnicima na mreži da identificira tko je\n"
+"prijavljen na drugim računalima koja odgovaraju."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Trying to rescue partition table"
-msgstr "Pokušavam spasiti particijsku tablicu"
+msgid "Automatic Steps Configuration"
+msgstr "Postava automatskih koraka"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
 msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
 msgstr ""
-"Umetnite disketu u pogon\n"
-"Svi podaci na disketi biti će izbrisani"
 
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Warning"
-msgstr "Upozorenje"
+msgid "Barbados"
+msgstr "Barbados"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Select file"
-msgstr "Odaberite datoteku"
+msgid "Please select data to backup..."
+msgstr "Izaberite podatke koje ćete pohraniti..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
 msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
 msgstr ""
-"Backup particijske tablice nema istu veličinu\n"
-"Da ipak nastavim?"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Removable media automounting"
-msgstr "Automatsko montiranje prenosivog medija"
+msgid "received"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Reload partition table"
-msgstr "Ponovno učitaj particijsku tabelu"
+msgid "/File/_New"
+msgstr "/Datoteka/_Nova"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Rescue partition table"
-msgstr "Spasi particijsku tabelu"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The DNS Server IP"
+msgstr "IP (ovog) DHCP poslužitelja"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Restore partition table"
-msgstr "Vrati particijsku tabelu"
+msgid "IP Range End:"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Save partition table"
-msgstr "Spremi particijsku tabelu"
+msgid "High"
+msgstr "Visok"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Ako želite dodati još koju particiju molim obrišite jednu od particija kako "
-"bi\n"
-"mogli stvoriti jednu extended particiju."
+msgid "NoVideo"
+msgstr "NemaVidea"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "I can't add any more partition"
-msgstr "Ne mogu dodati niti jednu dodatnu particiju"
+msgid "this field describes the device"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "All primary partitions are used"
-msgstr "Sve primarne particije su iskorištene"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Dodavanje pisača StarOfficeu/OpenOffice.org/GIMPu"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Hard drive information"
-msgstr "Hard disk informacije"
+msgid "Local Printers"
+msgstr "Lokalni pisači"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Auto allocate"
-msgstr "Raspodijeli automatski"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation image directory"
+msgstr "Xpmac (instalacijski zaslonski upravljački program)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Clear all"
-msgstr "Očisti sve"
+msgid "NIS Server"
+msgstr "NIS Poslužitelj"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Da li želite spremiti /etc/fstab promjene?"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Port: %s"
+msgstr "Port"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Da završim bez zapisivanje particijske tablice?"
+msgid "Spain"
+msgstr "Španjolska"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Quit without saving"
-msgstr "Da završim bez spremanja"
+msgid "This user name has already been added"
+msgstr "Ovaj korisnik već postoji"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1
 #, c-format
-msgid "Continue anyway?"
-msgstr "Da ipak nastavim?"
+msgid "Choose a file"
+msgstr "Izaberite datoteku"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Toggle to expert mode"
-msgstr "Normalno > Ekspert"
+msgid "Apply"
+msgstr "Primjeni"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "Prebaci u normalni mod"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Auto-detect available ports"
+msgstr "Koristi auto detekciju"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Undo"
-msgstr "Vrati"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Dijeljenje veze prema Internetu je trenutno onemogućeno"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Exit"
-msgstr "Izlaz"
+msgid "San Marino"
+msgstr "San Marino"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Choose a partition"
-msgstr "Izaberite particiju"
+msgid "Belgium"
+msgstr "Belgija"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose another partition"
-msgstr "Izaberite drugu particiju"
+msgid "Kuwait"
+msgstr "Kuvajt"
 
-#: ../../diskdrake/removable.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Change type"
-msgstr "Promijeni tip"
+msgid "Choose the window manager to run:"
+msgstr "Izaberite prozorski upravitelj koji želite pokrenuti:"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Search servers"
-msgstr "Poslužitelji za pretraživanje"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain"
-msgstr "NIS domena"
+msgid "sub generation of the cpu"
+msgstr ""
 
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "Username"
-msgstr "Korisničko ime"
+msgid "First Time Wizard"
+msgstr "Dobro došli u čarobnjak za prvi put"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps.pm:1
 #, c-format
 msgid ""
-"Please enter your username, password and domain name to access this host."
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
 msgstr ""
+"Dogodila se greška, ali neznam kako s njom lijepo rukovati.\n"
+"Nastavite dalje na vlastiti rizik."
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain Authentication Required"
-msgstr "Provjera autentičnosti"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Another one"
-msgstr "Internet"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "please wait, parsing file: %s"
+msgstr "Molim pričekajte, parsiram datoteku: %s"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Which username"
-msgstr "Korisničko ime"
+msgid "Taiwan"
+msgstr "Tajland"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr ""
+msgid "Pakistan"
+msgstr "Pakistan"
 
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "cpu # "
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
 msgstr ""
+"Da bi mogli ispisivati sa svojim Lexmark inkjetom i ovom postavom, "
+"trebateLexmarkove inkjet pokretačke programe za pisače (http://www.lexmark."
+"com/).Otiđite na američki site i stisnite na \"Drivers\" dugme. Zatim "
+"izaberitevaš model i potom \"Linux\" kao operativni sustav. Pokretački "
+"programi dolazekao RPM paketi ili skripte za ljusku sa interaktivnom "
+"grafičkom instalacijom.Ne trebate raditi ovu konfiguraciju iz grafičkog "
+"sučelja. Odustanite odmahnakon pristajanja na licencu. Zatim ispišite "
+"stranice za namještanje glavepisača sa \"lexmarkmaintain\" i podesite "
+"postavke za namještanje glave saovim programom."
 
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "SMBus controllers"
-msgstr ""
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Permissions"
+msgstr "Inačica: %s\n"
 
-#: ../../harddrake/data.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "USB controllers"
-msgstr ""
+msgid "Provider name (ex provider.net)"
+msgstr "Ime ISP pružatelja (npr. provider.hr)"
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "SCSI controllers"
-msgstr ""
+msgid "Version: %s\n"
+msgstr "Inačica: %s\n"
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Firewire controllers"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
 msgstr ""
+"Vaš sustav je slab na resursima. Možete imati nekih problem prilikom\n"
+"instalacije Mandrake Linux-a. Ukoliko se to desi, možete probati tekstualnu\n"
+"instalaciju. Za to, pritisnite `F1' kada podižete CDROM, i unesite `text'."
 
-#: ../../harddrake/data.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr ""
+msgid "Use the Windows partition for loopback"
+msgstr "Koristi Windows particiju za loopback"
 
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Joystick"
-msgstr ""
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Scanner"
-msgstr "Odaberite skener"
-
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown/Others"
-msgstr "Generički"
+msgid "Armenian (typewriter)"
+msgstr "Armenska (pisaća mašina)"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Bridges and system controllers"
-msgstr ""
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Modem"
-msgstr "Miš"
+msgid "Connection type: "
+msgstr "Tip veze: "
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "Ethernet kartica"
+msgid "Graphical interface"
+msgstr "X kod pokretanja sustava"
 
-#: ../../harddrake/data.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
 #, c-format
-msgid "Processors"
-msgstr ""
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s sa 3D hardware akceleracijom"
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Webcam"
-msgstr ""
+msgid "India"
+msgstr "Indija"
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Soundcard"
-msgstr "Zvučna kartica"
+#: ../../lang.pm:1
+#, c-format
+msgid "Chad"
+msgstr "Čad"
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "Ostali mediji"
+#: ../../lang.pm:1
+#, c-format
+msgid "Slovakia"
+msgstr "Slovačka"
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Tvcard"
-msgstr "TV kartica"
+#: ../../lang.pm:1
+#, c-format
+msgid "Singapore"
+msgstr "Singapur"
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Videocard"
-msgstr "Video mod"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cambodia"
+msgstr "Kambodža"
 
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Tape"
-msgstr "Vrsta"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Monitor HorizSync: %s\n"
+msgstr "Horizontalna Sinkronizacija Monitora: %s\n"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "DVD-ROM"
+msgid "Path"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "CD/DVD burners"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
 msgstr ""
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "CDROM"
-msgstr "\t-CDROM.\n"
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Disk"
-msgstr "Danska"
-
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Zip"
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
 msgstr ""
+"Ispisni sustav (%s) se neće automatski pokretati kada se računalu pokrene.\n"
+"\n"
+"Moguće je da je automatsko pokretanje isključeno zbog prebacivanja na "
+"višusigurnosnu razinu, jer je ispisni sustav moguća točka napada.\n"
+"\n"
+"Želite li ponovno uključiti automatsko podizanje ispisnog sustava?"
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Floppy"
-msgstr "Spremi na disketu"
-
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Let me pick any driver"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
 msgstr ""
+"Pisač %s\n"
+"Što želite promijeniti na ovom pisaču?"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Driver:"
-msgstr "Upravljački program"
+msgid "Add host"
+msgstr "Dodaj korisnika"
 
 #: ../../harddrake/sound.pm:1
 #, c-format
@@ -8800,132 +8777,99 @@ msgid ""
 "The current driver for your \"%s\" sound card is \"%s\" "
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
-
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
 "\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Sound trouble shooting"
+"\"Custom\" permit a per-user granularity.\n"
 msgstr ""
+"Da li želite dozvoliti korisnicima da izvezu neke direktorije u "
+"njihivompolaznom direktoriju?\n"
+"Dozvoljavanjem navedenoga ćete dozvoliti korisnicima da jednostavno kliknuna "
+"\"Dijeljenje\"\n"
+" u konqueroru i nautilusu.\n"
+"\n"
+"\"Proizvoljno\" će omogućiti dozvoljavanje po korisniku.\n"
 
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
 msgstr ""
+"Molimo izaberite učitivanje ili spremanje izbora paketa na disketu.\n"
+"Format je isto kao auto_install napravljene diskete."
 
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
-msgid "Unkown driver"
-msgstr "Nepoznati model"
-
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr ""
-
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
-msgid "No known driver"
-msgstr "X upravljački program"
+msgid "China (broadcast)"
+msgstr "Kina (bcast)"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
+msgid "Use quota for backup files."
+msgstr "Koristi quotu za pohranjene datoteke"
 
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "No open source driver"
-msgstr "X upravljački program"
+msgid "Configuring printer \"%s\"..."
+msgstr "Podešavam pisač \"%s\" ..."
 
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Molimo pričekajte... Primjenjujem konfiguraciju"
+msgid "Internet connection"
+msgstr "Internet veza"
 
-#: ../../harddrake/sound.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
 msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
 msgstr ""
+"Učitavanje modula %s nije uspjelo.\n"
+"Da li želite pokušati ponovo sa drugim parametrima?"
 
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
-msgid "Trouble shooting"
-msgstr ""
+msgid "Welcome to the Open Source world."
+msgstr "Dobrodošli u Open Source svijet"
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
+msgid "Bosnia and Herzegovina"
+msgstr "Bosna i Hercegovina"
 
-#: ../../harddrake/sound.pm:1
-#, c-format
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
 msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
 msgstr ""
+"Treba vam istinski datotečni sustav (ex2, reiserfs) za ovo mjesto "
+"montiranja\n"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Upišite ime hosta ili IP."
+
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
+msgid "Netherlands"
+msgstr "Nizozemska"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Sound configuration"
-msgstr "CUPS postavke"
+msgid "Sending files by FTP"
+msgstr "Šaljem datoteke..."
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Internal ISDN card"
+msgstr "Interna ISDN kartica"
 
 #: ../../harddrake/sound.pm:1
 #, c-format
@@ -8934,1663 +8878,1671 @@ msgid ""
 "currently uses \"%s\""
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Title"
+msgstr "Tablica"
+
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "No alternative driver"
-msgstr ""
+msgid "Install & convert Fonts"
+msgstr "Instaliraj i pretvori fontove"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "enable radio support"
+msgid "WARNING"
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Radio support:"
-msgstr ""
+msgid "Installing bootloader"
+msgstr "Instaliranje bootloadera"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakautoinst:1
 #, fuzzy, c-format
-msgid "PLL setting:"
-msgstr "Postavka opterećenja"
+msgid "replay"
+msgstr "Ponovno prikaži"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr ""
+msgid "detected %s"
+msgstr "detektirano %s"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Number of capture buffers:"
-msgstr ""
-
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "Promijeni tip"
-
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "Card model:"
-msgstr "Memorija kartice (DMA)"
+msgid "Virgin Islands (U.S.)"
+msgstr "Djevičanski Otoci (U.S.)"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
+msgid "Bad backup file"
+msgstr "Loša backup datoteka"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Unknown|Generic"
-msgstr "Generički"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgid ""
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
 msgstr ""
+"Postavljanje dijeljenja veze prema Internetu je već napravljeno.\n"
+"Trenutno je onemogućeno.\n"
+"\n"
+"Što želite napraviti?"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgid "Enter IP address and port of the host whose printers you want to use."
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Auto-detect"
-msgstr "Koristi auto detekciju"
+msgid "Pipe into command"
+msgstr "Proslijedi (pipe) na komandu"
 
-#: ../../interactive/newt.pm:1
-#, fuzzy, c-format
-msgid "Do"
-msgstr "Gotov"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid ""
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
+msgstr ""
+"Neki hardware na vašem računalu treba ``vlasničke'' upravljačke programe\n"
+"kako bi proradio. Možete naći više informaciju o tome na: %s"
 
-#: ../../interactive/stdio.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Your choice? (default %s) "
-msgstr "Vaš izbor? (uobičajeno %s) "
+msgid "Detecting devices..."
+msgstr "Otkrivanje uređaja..."
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Bad choice, try again\n"
-msgstr "Krivi izbor, pokušajte ponovo\n"
+msgid "Click here to launch the wizard ->"
+msgstr "Ovdje stisnite za pokretanje čarobnjaka ->"
 
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Re-submit"
-msgstr "Ponovno Pošalji"
+msgid "Haiti"
+msgstr "Haiti"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"Description of the fields:\n"
+"\n"
 msgstr ""
-"=> Obavijest, naziv promijenjen:\n"
-"%s"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+msgid "the name of the CPU"
 msgstr ""
-"Molim, izaberite prvi broj do 10 kojeg želite urediti,\n"
-"ili samo pritisnite Enter za nastavak.\n"
-"Vaš izbor? "
 
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Postoji mnogo stvari za odabir iz (%s).\n"
+msgid "Refreshing printer data..."
+msgstr "Osvježavam padatke o pisaču ..."
 
-#: ../../interactive/stdio.pm:1
+#: ../../install2.pm:1
 #, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Vaš izbor? (uobičajeno `%s'%s) "
+msgid "You must also format %s"
+msgstr "Morate također formatirati %s"
 
-#: ../../interactive/stdio.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid " enter `void' for void entry"
-msgstr ""
+msgid "Be careful: this operation is dangerous."
+msgstr "Budite oprezni: ova operacija je opasna"
 
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Do you want to click on this button?"
-msgstr "Da li želite kliknuti na ovaj gumb? "
+msgid "Insert a floppy containing package selection"
+msgstr "Umetnite disketu koja sadržava izbor paketa"
 
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Gumb `%s': %s"
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "Server: "
+msgstr "Poslužitelj"
 
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Vaš izbor? (0/1, uobičajeno '%s') "
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Alerts:"
+msgstr "Sigurnosna razina"
 
-#: ../../interactive/stdio.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Unosi koje trebate popuniti:\n"
-"%s"
+msgid "Sweden"
+msgstr "Švedska"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+msgid "Use Expect for SSH"
 msgstr ""
-"Učitavanje modula %s nije uspjelo.\n"
-"Da li želite pokušati ponovo sa drugim parametrima?"
 
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Specify options"
-msgstr "Odredi postavke"
+msgid "Poland"
+msgstr "Poljska"
 
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Autoprobe"
-msgstr "Auto. ispitaj"
+msgid "Importance: %s\n"
+msgstr "Značaj: %s\n"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Naznačite da li prethodno želite obrisati vaš CDRW"
+
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Other ports"
+msgstr "Iskušaj portove"
+
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+msgid "number of capture buffers for mmap'ed capture"
 msgstr ""
-"U nekim slučajevima, %s upravljački program treba dodatne informacije da bi "
-"radio\n"
-"ispravno, iako normalno radi i bez toga. Da li želite specifirati te "
-"dodatne\n"
-"opcije za njega ili želite dozvoliti upravljačkom programu da isproba vaše\n"
-"računalo za informacije koje treba? Ponekad, isprobavanje može zamrznuti\n"
-"vaše računlo, ali ne bi trebalo izazvati nikakvu štetu."
 
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Which %s driver should I try?"
-msgstr "Koji %s upravljački program želite isprobati?"
+msgid "SMBus controllers"
+msgstr ""
 
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Module options:"
-msgstr "Postavke modula:"
+msgid "Connection timeout (in sec)"
+msgstr "Vrijeme čekanja veze (u sek)"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sada možete unijeti postavke za modul %s.\n"
-"Postavke su formata ``ime=vrijednost ime2=vrijednost2...''.\n"
-"Na primjer, ``io=0x300 irq=7''"
-
-#: ../../modules/interactive.pm:1
-#, fuzzy, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
 msgstr ""
-"Sada možete unijeti opcije za modul %s.\n"
-"Primjetite da svaka adresa treba biti unešena sa prefiksom 0x kao '0x123'"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
 
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaliram upravljački program %s za karticu %s"
+msgid "Croatian"
+msgstr "Hrvatska"
 
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "See hardware info"
-msgstr "Pokaži info o hardveru"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Koristi postojeće particije"
 
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Da li imate %s međusklopova?"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "Ne mogu napraviti fork: %s"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Do you have another one?"
-msgstr "Da li imate još koji?"
+msgid "/Help/_About..."
+msgstr "/Pomoć/_O programu"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Found %s %s interfaces"
-msgstr "Pronašao sam %s %s međusklopova"
+msgid "Remove user directories before restore."
+msgstr "Ukloni mape korisnika prije povrata."
 
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "You can configure each parameter of the module here."
+msgid ""
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
 msgstr ""
+"Sada ćete podesiti udaljeni pisač. Zahtjeva ispravni pristup mreži, aliona "
+"još nije podešena. Ako nastavite bez ispravne mreže, nećete moćikoristiti "
+"pisač kojeg sada podešavate. Kako želite nastaviti?"
 
-#: ../../modules/parameters.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "comma separated strings"
-msgstr "Formatiraj particije"
+msgid "CUPS printer configuration"
+msgstr "OKI winprinter konfiguracija"
 
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "comma separated numbers"
-msgstr ""
+msgid "could not find any font in your mounted partitions"
+msgstr "nisam mogao naći nikakve fontove na vašim montiranim particijama"
 
-#: ../../modules/parameters.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "%d comma separated strings"
+msgid "F00f bug"
 msgstr ""
 
-#: ../../modules/parameters.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
 #, c-format
-msgid "%d comma separated numbers"
-msgstr ""
-
-#: ../../modules/parameters.pm:1
-#, fuzzy, c-format
-msgid "a number"
-msgstr "Telefonski broj"
+msgid "XFree %s"
+msgstr "XFree %s"
 
-#: ../../network/adsl.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
 msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
 msgstr ""
+"Koji dhcp klijent želite koristiti?\n"
+"Pretpostavljeni je dhcp-client"
 
-#: ../../network/adsl.pm:1
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Najčešći način da se povežete sa adsl-om je pppoe.\n"
-"Neke veze koriste pptp, a nekoliko koriste dhcp.\n"
-"Ukoliko neznate, izaberite 'koristi pppoe'"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Domain Name:"
+msgstr "Ime domene"
 
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Spoji se na Internet"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "On Floppy"
+msgstr "Spremi na disketu"
 
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr ""
+msgid "Restore"
+msgstr "Povrati"
 
-#: ../../network/adsl.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
 
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "use dhcp"
-msgstr "koristi dhcp"
+msgid "Looking for available packages..."
+msgstr "Tražim dostupne pakete"
 
-#: ../../network/adsl.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "use pptp"
-msgstr "koristi pptp"
+msgid "Init Message"
+msgstr "Init poruka"
 
-#: ../../network/adsl.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "use pppoe"
-msgstr "koristi pppoe"
+msgid "Rescue partition table"
+msgstr "Spasi particijsku tabelu"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Other ports"
-msgstr "Iskušaj portove"
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Everything (no firewall)"
-msgstr ""
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
+msgid "Connection complete."
+msgstr "Brzina"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
+msgid "Cyprus"
+msgstr "Cipar"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr ""
+msgid "Remove from RAID"
+msgstr "Ukloni sa RAID-a"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+msgid "This encryption key is too simple (must be at least %d characters long)"
 msgstr ""
-"tinyfirewall podešavanje\n"
-"\n"
-"Ovo podešava osobni vatrozid za ovo Mandrake Linux računalo.\n"
-"Za snažno primjenjena vatrozidna rješenja, molimo pogledajte\n"
-"specijaliziranu MandrakeSecurity Firewall distribuciju."
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "No network card"
-msgstr "ne mogu pronaći niti jednu mrežnu karticu"
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "POP and IMAP Server"
-msgstr "LDAP Poslužitelj"
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "Mail Server"
-msgstr "Poslužitelj baza podataka"
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "Domain Name Server"
-msgstr "Ime domene"
+"Upisani enkripcijski ključ je prejednostavan (mora biti dug najmanje %d "
+"znakova)"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "Web Server"
-msgstr "Poslužitelj"
+msgid "Configuration Wizards"
+msgstr "Čarobnjak mrežnih postavki"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr ""
+msgid "ISDN connection"
+msgstr "ISDN veza"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Host name"
-msgstr "Ime računala"
+msgid "primary"
+msgstr ""
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "Ime računala"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr "na Windows poslužitelju \"%s\", dijeli \"%s\""
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
 "\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
 "\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
 msgstr ""
+"Sada možete izabrati servise koje želite pokreniti pri podizanju.\n"
+"\n"
+"Ovdje su predstavljeni svi servisi dostupni sa trenutnom instalacijom.\n"
+"Pregledajet ih pažljivo i maknite one koje nisu uvijek potrebni prilikom\n"
+"podizanja sustava.\n"
+"\n"
+"Odabiranjem određenog servisa dobit ćete kratki opis tog servisa. Međutim, "
+"ako\n"
+"niste sigurni je li servis koristan ili ne, sigurnije je ostaviti "
+"predodređeno\n"
+"ponašanje.\n"
+"\n"
+"!! Na ovoj razini obratite pozornost na to da li ćete koristiti stroj kao\n"
+"poslužitelj: vjerojatno ne želite pokretati neke servise koje ne trebate.\n"
+"Prisjetite se da neki servisi mogu biti opasni ako su pokrenuti na "
+"poslužitelju.\n"
+"Općenito, izaberite samo one servise koji vam stvarno trebaju.\n"
+"!!"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Configuring network"
-msgstr "Podešavam mrežu"
-
-#: ../../network/ethernet.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr ""
-"Molimo izaberite sa kojim mrežnim adapterom se želite priključiti na Internet"
+msgid "Skip"
+msgstr "Preskoči"
 
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose the network interface"
-msgstr "Odaberite mrežni međusklop"
+msgid "Niue"
+msgstr "Niue"
 
-#: ../../network/ethernet.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
 msgstr ""
-"Nije pronađen niti jedan mrežni adapter na vašem sustavu.\n"
-"Ne mogu postaviti ovu vrstu veze."
+"Aktivira/Deaktivira sva podešena mrežna sučelja prilikom pokretanja\n"
+"sustava."
 
-#: ../../network/ethernet.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
 msgstr ""
-"Koji dhcp klijent želite koristiti?\n"
-"Pretpostavljeni je dhcp-client"
 
-#: ../../network/isdn.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nisam našao niti jednu ISDN PCI karticu. Molim izaberite vašu PCI karticu na "
-"slijedećem ekranu."
+msgid "important"
+msgstr "važno"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-"Pronašao sam ISDN PCI karticu međutim ne znam kojeg je tipa. Molim izaberite "
-"vašu PCI karticu na slijedećem ekranu."
+msgid "Total Progress"
+msgstr "Ukupni progres"
 
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Kakvu ISDN karticu imate?"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN postavke"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Abort"
-msgstr "Prekini"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Continue"
-msgstr "Nastavi"
-
-#: ../../network/isdn.pm:1
-#, c-format
 msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
 "\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
 "\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
 msgstr ""
+"DrakX sada pretražuje IDE uređaje prisutne u vašem računalu.Također će "
+"pokušati\n"
+"pronaći PCI SCSI adapter(e). Ukoliko DrakX\n"
+"pronađe SCSI adapter i zna koji upravljački program da koristi, on će \n"
+"automatski biti instaliran.\n"
 "\n"
-"Ukoliko imate ISA karticu, vrijednosti na slijedećem zaslonu trebale bi biti "
-"dobre.\n"
+"Ukoliko imate SCSI adapter, ISA SCSI adapter ili PCI SCSI adapter koji\n"
+"DrakX ne može prepoznati, biti ćete pitani da li imate SCSI adapter u vašem\n"
+"sustavu. Ukoliko nemate adapter, možete kliknuti na \"Ne\". Ukoliko kliknete "
+"na\n"
+"\"Da\", dobiti ćete popis upravljačkih programa odakle možete izabrati vaš\n"
+"specifičan adapter.\n"
 "\n"
-"Ukoliko imate PCMCIA karticu, morate znati irq i io vaše kartice.\n"
+"Ako trebate ručno specifirati vaš adapter, DrakX će pitati da li želite \n"
+"specifirati opcije za njega. Trebali biste dozvoliti DrakX-u da isproba "
+"opcije za\n"
+"hardware. Ovo obično radi dobro.\n"
+"\n"
+"Ako ne, trebati ćete navesti opcije za upravljački program. Molimo\n"
+"pregledajte User\n"
+"Guide (poglavlje 3, sekciju \"Collecting informations on your hardware\") "
+"za\n"
+"preporuke o pribavljanju ovih informacija iz dokumentacije hardware-a, sa \n"
+"proizvođačevog Web site-a (ukoliko imate Internet pristup) ili iz Microsoft "
+"Windows-a\n"
+"(ukoliko ga imate na vašem sustavu)."
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "I don't know"
-msgstr "Ne znam"
+msgid "Users"
+msgstr "Korisnici"
 
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "Aruba"
+msgstr "Aruba"
 
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Preparing bootloader..."
+msgstr "Pripremam bootloader"
 
-#: ../../network/isdn.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "What kind of card do you have?"
-msgstr "Kakvu karticu posjedujete?"
+msgid "Gateway (e.g. %s)"
+msgstr "Gateway (npr. %s)"
 
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr ""
+msgid "The passwords do not match"
+msgstr "Lozinke se ne podudaraju"
 
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Koji protokol želite koristiti ?"
+msgid "Examples for correct IPs:\n"
+msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokol za ostatak svijeta"
+msgid "Frequency (MHz)"
+msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
 msgstr ""
-"Protokol za ostatak svijeta \n"
-" bez D-kanala (za iznajmljene linije)"
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "European protocol"
-msgstr "Europski protokol"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Europski protokol (EDSS1)"
+"Za korištenje spremljenog odabira paketa, podignite instalaciju sa ``linux "
+"defcfg=floppy''"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+msgid "the number of the processor"
 msgstr ""
-"Izaberite vašeg pružatelja Internet usluga.\n"
-" Ako nije na popisu odaberite Drugi"
 
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "External ISDN modem"
-msgstr "Vanjski ISDN modem"
+msgid "Hardware clock set to GMT"
+msgstr "Vaš hardverski sat namješten je na GMT"
 
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Internal ISDN card"
-msgstr "Interna ISDN kartica"
+msgid "Give a file name"
+msgstr "Dajte ime datoteke"
 
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Kakav tip ISDN veze koristite ?"
+msgid "Please choose the port that your printer is connected to."
+msgstr "Izaberite port na kojem se nalazi pisač."
 
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../standalone/livedrake:1
 #, c-format
-msgid "Network Configuration Wizard"
-msgstr "Čarobnjak mrežnih postavki"
+msgid "Change Cd-Rom"
+msgstr "Promjeni Cd-Rom"
 
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Stara konfiguracija (isdn4net)"
+msgid "Paraguay"
+msgstr "Paragvaj"
 
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Nova konfiguracija (isdn-light)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups  (do not replace old backups)"
+msgstr "Koristi inkrementalnu pohranu (ne zamjenjuje stare pohrane)"
 
-#: ../../network/isdn.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+msgid "There's no known driver for your sound card (%s)"
 msgstr ""
-"Koju ISDN konfiguraciju preferirate?\n"
-"\n"
-"* Stara konfiguracija koristi isdn4net. Ona sadrži snažne\n"
-"  alate, ali je teška za konfiguriranje, nije standardna.\n"
-"\n"
-"* Nova konfiguracija je lakša za razumiti, mnogo standardnija,\n"
-"  ali sa manje alata.\n"
-"\n"
-"Preporučamo laku konfiguraciju.\n"
 
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Do nothing"
-msgstr "ali ne odgovara"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "force"
+msgstr "prisili"
 
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Install rpm"
-msgstr "Instaliraj"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Exit"
+msgstr "Izlaz"
 
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
 msgstr ""
 
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Title"
-msgstr "Tablica"
-
-#: ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
 msgstr ""
+"Nemate niti jedan konfigurirani međusklop.\n"
+"Konfigurirajte ga prvo klikanjem na 'Postavljanje'"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Drugi DNS poslužitelj (opciono)"
+msgid "Estonian"
+msgstr "Estonska"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../services.pm:1
 #, c-format
-msgid "First DNS Server (optional)"
-msgstr "Prvi DNS poslužitelj (opciono)"
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr ""
+"Apache je World Wide Web poslužitelj. Koristi se za posluživanje HTML\n"
+"dokumenata i CGI skripti."
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Domain name"
-msgstr "Ime domene"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Add/Del Clients"
+msgstr "DHCP klijent"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "Choose the network interface"
+msgstr "Odaberite mrežni međusklop"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Script-based"
-msgstr "Temeljem skripta"
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Unknown Model"
+msgstr "Nepoznati model"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Terminal-based"
-msgstr "Terminal-zasnovano"
+msgid "CD/DVD burners"
+msgstr ""
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid ""
+"Partition booted by default\n"
+"    (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Podrazumijevana boot particija\n"
+"  (za MS-DOS boot, ne za LILO)\n"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Login ID"
-msgstr "Prijavno ime"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "Izaberite datoteku"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/shorewall.pm:1
 #, c-format
-msgid "Phone number"
-msgstr "Telefonski broj"
+msgid "Firewalling configuration detected!"
+msgstr "Detektirana je vatrozidna konfiguracija!"
 
 #: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
 msgid "Connection name"
 msgstr "Ime veze"
 
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Dialup options"
-msgstr "Podesi dialup"
-
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Izaberite serijski port na kojemu se nalazi modem."
-
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Network Configuration"
-msgstr "Mrežne postavke"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+"x coordinate of text box\n"
+"in number of characters"
 msgstr ""
-"Došlo je do problema tijekom namještanja. Provjerite vezu putem "
-"net_monitora\n"
-"ili mcca. Ako vaša veza ne radi, možda ćete morati ponovno pokrenuti\n"
-"konfiguraciju"
 
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Nakon što je to napravljeno, preporučamo da ponovno pokrenete vaše X\n"
-"okružje kako bi izbjegli probleme prilikom promjene imena računala."
+msgid "Updating package selection"
+msgstr "Dograđujem izbor paketa"
 
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Čestitam, mrežna i internet konfiguracija je završena.\n"
-"\n"
-"Konfiguracija će sada biti primjenjena na vašem sustavu.\n"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Gdje želite montirati loopback datoteku %s?"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
 msgstr ""
-"Problem se pojavio prilikom ponovnog pokretanja mreže: \n"
-"\n"
-"%s"
+"Disketa je uspješno stvorena.\n"
+"Sada možete ponoviti svoju instalaciju"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Paket %s treba instalirati. Da li ga želite instalirati?"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Network configuration"
-msgstr "Mrežne postavke"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Da li želite pokreniti vašu vezu kod svakog podizanja (boot) sustava ?"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection"
-msgstr "Internet veza"
+msgid "the number of buttons the mouse has"
+msgstr "2 gumba"
 
-#: ../../network/netconnect.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
 msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Odabrali ste više načina za spajanje na Internet.\n"
-"Molimo izaberite koji želite koristiti.\n"
-"\n"
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
+msgstr "Upišite mapu na ovom hostu u koju ćete staviti pohranu."
 
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Izaberite vezu koju želite podesiti"
+msgid "Replay"
+msgstr "Ponovno prikaži"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "ethernet card(s) detected"
-msgstr "ethernet kartica(e) pronađene"
+msgid "Backup other files"
+msgstr "Pohrani ostale datoteke"
 
-#: ../../network/netconnect.pm:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "LAN connection"
-msgstr "LAN veza"
+msgid "No floppy drive available"
+msgstr "Disketni pogon nije dostupan"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "cable connection detected"
-msgstr "detektirana kablovska veza"
+msgid "Backup files are corrupted"
+msgstr "Pohranjene datoteke su oštećene"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Cable connection"
-msgstr "Kablovska veza"
+msgid "TV norm:"
+msgstr "TV standard :"
 
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "detected"
-msgstr "detektirano %s"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Cpuid family"
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "ADSL connection"
-msgstr "ADSL veza"
+msgid "32 MB"
+msgstr "32 MB"
 
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "detected %s"
-msgstr "detektirano %s"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Lituanska AZERTY (nova)"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "ISDN connection"
-msgstr "ISDN veza"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../fsedit.pm:1
 #, fuzzy, c-format
-msgid "Winmodem connection"
-msgstr "Normalna modemska veza"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "detected on port %s"
-msgstr "detektiran na portu %s"
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Izabrali ste softwaresku RAID particiju kao root (/).\n"
+"Nema bootloader-a koji je u mogućnosti to podržati bez /boot particije.\n"
+"Zato budite pažljivi da dodate /boot particiju"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Normal modem connection"
-msgstr "Normalna modemska veza"
+msgid "Previous"
+msgstr "Prijašnje"
 
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Detecting devices..."
-msgstr "Otkrivanje uređaja..."
+msgid "Other OS (MacOS...)"
+msgstr "Drugi OS (MacOS...)"
 
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Expert Mode"
-msgstr "Ekspertni mod"
+msgid "To activate the mouse,"
+msgstr "Za aktiviranje miša,"
 
-#: ../../network/netconnect.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Use auto detection"
-msgstr "Koristi auto detekciju"
+msgid "Bringing up the network"
+msgstr "Podižem mrežu"
 
-#: ../../network/netconnect.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Choose the profile to configure"
-msgstr "Izaberite profil za konfiguriranje"
+msgid "Screenshots will be available after install in %s"
+msgstr "Screenshotovi će biti raspoloživi poslije instalaciju u %s"
 
-#: ../../network/netconnect.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"Welcome to The Network Configuration Wizard.\n"
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
 "\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Dobro Došli u Čarobnjak za podešavanje mreže\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
 "\n"
-"Sada ćemo konfigurirati vašu internet/mrežnu vezu.\n"
-"Ukoliko ne želite koristiti auto detekciju, odselektirajte kvadratić s "
-"potvrdom.\n"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Pošto radite mrežnu instalaciju, vaša mreža je već konfigurirana.\n"
-"Pritisnite U redu da zadržite postojeće postavke, ili Odustani za ponovno "
-"konfiguriranje vaše mrežne/Internet veze.\n"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
 "\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
 "\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
 "\n"
-"We are now going to configure the %s connection.\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
 "\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
 "\n"
-"Press OK to continue."
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
 msgstr ""
+"Više od jedne Microsoft Windows particije su pronađene\n"
+"na vašem hard disku. Molimo izaberite jednu kojoj želite promjeniti "
+"veličinu\n"
+"kako bi instalirali vaš novi Mandrake Linux operativni sustav.\n"
 "\n"
+"Svaka je particija popisana kako slijedi; \"Linux ime\", \"Windows ime\"\n"
+"\"Kapacitet\".\n"
 "\n"
+"\"Linux ime\" je kodirano kako slijedi: \"tip hard diska\", \"broj hard diska"
+"\",\n"
+"\"broj particije\" (naprimjer, \"hda1\").\n"
 "\n"
-"Sada ćemo podesiti %s vezu.\n"
+"\"Tip hard diska\" je \"hd\" ukoliko je hard disk - IDE hard disk i \"sd\"\n"
+"ukoliko je on SCSI hard disk.\n"
 "\n"
+"\"Broj hard diska\" je uvijek slovo poslije \"hd\" ili \"sd\". Sa IDE hard\n"
+"diskovima:\n"
 "\n"
-"Pritisnite U redu za nastavak."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Sada ćemo podesiti %s vezu."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection & configuration"
-msgstr "Internet veza i postava"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Configure the connection"
-msgstr "Podesi vezu"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Disconnect"
-msgstr "Odspoji"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Connect"
-msgstr "Poveži"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
+"   * \"a\" znači \"master hard disk na primarnom IDE kontroleru\",\n"
 "\n"
-"You can reconfigure your connection."
-msgstr ""
+"   * \"b\" znači \"slave hard disk na primarnom IDE kontroleru\",\n"
 "\n"
-"Možete ponovno konfigurirati vašu vezu."
+"   * \"c\" znači \"master hard disk na sekundarnom IDE kontroleru\",\n"
+"\n"
+"   * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\".\n"
+"\n"
+"Sa SCSI hard diskovima, \"a\" znači \"primarni hard disk\", \"b\" znači\n"
+"\"sekundarni hard disk\", itd...\n"
+"\n"
+"\"Windows ime\" je slovo vašeg hard diska pod Windows-ima (prvi disk\n"
+"ili particija se zove \"C:\")."
 
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+msgid "Tanzania"
 msgstr ""
-"\n"
-"Možete se spojiti na Internet ili ponovno konfigurirati vašu vezu."
 
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Niste trenutno spojeni na Internet."
+msgid "Computing FAT filesystem bounds"
+msgstr "Izračunavam granice fat datotečnog sustava"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
 "\n"
-"You can disconnect or reconfigure your connection."
+"Backup Sources: \n"
 msgstr ""
 "\n"
-"Možete isključiti ili ponovno konfigurirati vašu vezu."
+"Izvori za pohranu: \n"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Trenutno ste spojeni na internet."
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Url treba početi sa 'http:'"
+msgid "Content of the file"
+msgstr "Sadržaj datoteke"
 
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy treba biti http://..."
+msgid "Authentication LDAP"
+msgstr "LDAP Autentifikacija"
 
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
+msgid "Let me pick any driver"
+msgstr ""
 
-#: ../../network/network.pm:1
-#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Profile "
+msgstr "Profil: "
 
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Proxies configuration"
-msgstr "Postava proxy-a"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "IP adresa treba biti oblika 1.2.3.4"
+msgid "transmitted"
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "IP adresa treba biti oblika 1.2.3.4"
+msgid "Palestine"
+msgstr "Spremi odabir paketa"
 
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Gateway device"
-msgstr "Gateway uređaj"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
 
-#: ../../network/network.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (npr. %s)"
+msgid "%d comma separated strings"
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "DNS server"
-msgstr "DNS poslužitelj"
+msgid "Here is the full list of keyboards available"
+msgstr "Ovdje je cijeli popis raspoloživih tipkovnica"
 
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Theme name"
+msgstr "Ime sharea"
+
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Molim unesite ime računala.\n"
-"Ime računala treba biti puno ime računala,\n"
-"primjerice mojeracunalo.odjel.domena.hr.\n"
-"Također unesite IP adresu gateway računala ako gateway postoji"
+msgid "/_Help"
+msgstr "/_Pomoć"
 
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
 msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
 msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+msgid "the width of the progress bar"
 msgstr ""
 
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa treba biti oblika 1.2.3.4"
+msgid "Cook Islands"
+msgstr "Cook Islands"
 
-#: ../../network/network.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Start at boot"
-msgstr "Pokrenuto pri podizanju"
+msgid "Formatting partition %s"
+msgstr "Formatiram particiju %s"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Upišite ime hosta ili IP."
+msgid "Hostname required"
+msgstr "Ime računala: "
 
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Mrežne postavke"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselect fonts installed"
+msgstr "Odselektiraj instalirane fontove"
 
-#: ../../network/network.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Prati id mrežne kartice (korisno za laptope)"
+msgid "Cancel"
+msgstr "Odustani"
 
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Ime računala"
-
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Netmask"
-msgstr "Netmaska"
+msgid "Searching for configured scanners ..."
+msgstr "Lokalni pisač"
 
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "IP address"
-msgstr "IP adresa"
+msgid "Wheel"
+msgstr "Kotačić"
 
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
+msgid "Videocard"
+msgstr "Video mod"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Automatic IP"
-msgstr "Automatski IP"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tPohrana koristi tar i bzip2\n"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, c-format
-msgid " (driver %s)"
-msgstr " (upravljački program %s)"
+msgid "Remove Selected"
+msgstr "Ukloni izabrano"
 
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _modems"
+msgstr "Koristi auto detekciju"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Configuring network device %s"
-msgstr "Podešavam mrežni uređaj %s"
+msgid "Remove printer"
+msgstr "Ukloni pisač"
 
-#: ../../network/network.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
 msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
 msgstr ""
-"Molim unesite IP postavke za ovaj stroj.\n"
-"Svaka stavka treba biti unesena kao  IP adresa odvojena\n"
-"točkama (npr. 1.2.3.4)"
+"UPOZORENJE!\n"
+"\n"
+"DrakX sada mora promijeniti veličinu vaše Windows particije\n"
+"Budite vrlo oprezni budući da je ova operacija\n"
+"izuzetno opasna. Ukoliko još niste mijenjali veličinu particije molim\n"
+"izađite prvo iz instalacije, pokrenite scandisk pod Windowsima (opcionalno "
+"pokrenite defrag), tada ponovno pokrenite instalaciju.\n"
+"Također preporučljivo je da sačuvate vaše podatke (napravite backup).\n"
+"Kada ste sigurni da želite nastaviti, pritisnite U redu."
 
-#: ../../network/network.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+msgid "Which services would you like to allow the Internet to connect to?"
 msgstr ""
-"UPOZORENJE: Ovaj uređaj je bio prethodno konfiguriran za spajanje na "
-"Internet.\n"
-"Jednostavno prihvatite ovaj uređaj konfiguriran.\n"
-"Promjena polja niže će prepisati ovu konfiguraciju."
 
-#: ../../network/shorewall.pm:1
-#, c-format
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
 msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
 msgstr ""
-"Upozorenje! Postojeća vatrozidna konfiguracija je pronađena. Morati ćete "
-"ručno popraviti neke dijelove nakon instalacije."
+"Dobrodošli u pomoćni program za postavljanje pošte/SMSa.\n"
+"\n"
+"Ovdje ćete moći namjestiti sustav upozoravanja.\n"
 
-#: ../../network/shorewall.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Detektirana je vatrozidna konfiguracija!"
+msgid "Other"
+msgstr "Ostali"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Account Password"
-msgstr "Korisnička Lozinka"
+msgid "Default"
+msgstr "Uobičajeno"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Account Login (user name)"
-msgstr "Korisničko ime"
+msgid "Button 2 Emulation"
+msgstr "Emulacija 2 gumba"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Vrijeme čekanja veze (u sek)"
+msgid "type1inst building"
+msgstr "stvaranje typ1insta"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Connection speed"
-msgstr "Brzina"
+msgid "Abiword"
+msgstr "Abiword"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image file"
+msgstr "Izaberite datoteku"
+
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Dialing mode"
-msgstr "Način biranja"
+msgid "X server"
+msgstr "X poslužitelj"
 
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Domain Admin User Name"
+msgstr "Ime domene"
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "There was an error while scanning for TV channels"
+msgstr "Pojavila se greška kod instalacije paketa:"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Choose your country"
-msgstr "Odaberite vašu zemlju"
+msgid "US keyboard (international)"
+msgstr "US keyboard (internacionalna)"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Not installed"
+msgstr "Post deinstalacija"
+
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Pružateljev DNS 2 (opciono)"
+msgid "LAN connection"
+msgstr "LAN veza"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Pružateljev DNS 1 (opciono)"
+msgid "/File/-"
+msgstr "/Datoteka/-"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Provider phone number"
-msgstr "Telef. broj pružatelja"
+msgid "Italian"
+msgstr "Talijanska"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
 #, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Ime ISP pružatelja (npr. provider.hr)"
+msgid "Basic"
+msgstr "Osnovno"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Your personal phone number"
-msgstr "Vaš osobni telefonski broj"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Card IO_1"
-msgstr "IO_1 kartice"
+msgid "Honduras"
+msgstr "Honduras"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1
 #, c-format
-msgid "Card IO_0"
-msgstr "IO_0 kartice"
+msgid "pdq"
+msgstr ""
 
 #: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
 msgid "Card IO"
 msgstr "IO kartice"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Card mem (DMA)"
-msgstr "Memorija kartice (DMA)"
+msgid "when checked, owner and group won't be changed"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Card IRQ"
-msgstr "IRQ kartice"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Ova specijalna bootstrap\n"
+"particija je za\n"
+"dvostruko-podizanje (dual-boot) vašeg sustava.\n"
 
-#: ../../network/tools.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Please fill or check the field below"
-msgstr "Molim ispunite ili provjerite vrijednost doljnjeg polja"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"Izaberite za svaki korak da li će se ponoviti kao i u vašoj instalaciji, "
+"iliće se izvoditi ručno"
 
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Connection Configuration"
-msgstr "Postava Veze"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
 msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
 msgstr ""
-"Čini se kako sustav nije spojen na internet.\n"
-"Probajte ponovno podesiti vašu vezu."
 
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Zbog sigurnosnih razloga, biti će sada odspojen."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Network by FTP.\n"
+msgstr "\t-Mrežu FTPom.\n"
 
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Sustav je sada spojen na Internet."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Russian (Yawerty)"
+msgstr "Ruska (Yawerty)"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Testing your connection..."
-msgstr "Testiram vašu vezu..."
+msgid "You must enter a device or file name!"
+msgstr "Morate unijeti ime uređaja ili datoteke!"
 
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Quit"
+msgstr "Završi"
+
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Da li želite pokušati spajanje na Internet ?"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
 
-#: ../../network/tools.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Internet configuration"
-msgstr "Postava Interneta"
+msgid "Graphics memory: %s kB\n"
+msgstr "Grafička memorija: %s kB\n"
 
-#: ../../partition_table/raw.pm:1
+#: ../../standalone.pm:1
 #, fuzzy, c-format
 msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
 msgstr ""
-"Nešto loše se dešava sa vašim pogonom. \n"
-"Test za provjeru integriteta podataka je neuspješan. \n"
-"To znači da pisanje bilo čega na vaš disk rezultira slučajnim smećem"
+"Ovaj program je besplatni softver; možete ga redistribuirati i/ili "
+"mijenjati\n"
+"pod uvjetima GNU General Public License objavljenje od Free Software\n"
+"Foundationa; ili inačice 2, ili (kako izaberete) neke kasnije inačice.\n"
+"\n"
+"Ovaj program se distribuira u nadi da će biti koristan, ali\n"
+"BEZ IKAKVE GARANCIJE; bez čak i podrazumijevane TRŽIŠNE GARANCIJE\n"
+"ili POGODNOSTI ZA ODREĐENU SVRHU. Pogledajte\n"
+"GNU General Public License za više detalja.\n"
+"\n"
+"Trebali ste dobiti presliku GNU General Public License\n"
+"sa ovim programom; ako ne, pišite na Free Software Foundation,\n"
+"Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
 
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Default)"
-msgstr " (Uobičajeno)"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "access to compilation tools"
+msgstr "pristup rpm alatima"
 
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Na CUPS poslužitelju \"%s\""
+msgid "Please select data to restore..."
+msgstr "Izaberite podatke za povrat"
 
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Remote Printers"
-msgstr "Udaljeni pisači"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Ukoliko želite koristiti aboot morate ostaviti dovoljno mjesta (npr. 2048 "
+"sektora) na\n"
+"početku diska"
 
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Standard test page"
+msgstr "Standardna testna stranica"
 
-#: ../../printer/cups.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "(on this machine)"
-msgstr "(na ovom računalu)"
+msgid "Create"
+msgstr "Napravi"
 
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
+msgid "What"
+msgstr "Što"
 
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "There was an error ordering packages:"
+msgstr "Javila se greška prilikom sortiranja paketa:"
 
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "Bulgarian (BDS)"
+msgstr "Bugarska (BDS)"
 
-#: ../../printer/data.pm:1
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Nova Generacija"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Disable Server"
+msgstr "Poslužitelj baza podataka"
 
-#: ../../printer/data.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "Filesystem encryption key"
+msgstr "Ključ enkriptiranja datotečnog sustava"
 
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
+msgid "Gujarati"
+msgstr ""
 
-#: ../../printer/data.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
+"Molim, izaberite prvi broj do 10 kojeg želite urediti,\n"
+"ili samo pritisnite Enter za nastavak.\n"
+"Vaš izbor? "
 
-#: ../../printer/data.pm:1
-#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Ispiši, Bez Reda"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Save theme"
+msgstr "Instaliraj sustav"
 
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Unknown Model"
-msgstr "Nepoznati model"
+msgid "group"
+msgstr "Radna grupa"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Unknown model"
-msgstr "Nepoznati model"
+msgid "Brazil"
+msgstr "Brazil"
 
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "Port"
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Auto Install"
+msgstr "Automatska Instalacija"
 
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Host %s"
-msgstr "Ime računala"
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#, c-format
+msgid "Network Configuration Wizard"
+msgstr "Čarobnjak mrežnih postavki"
 
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Network %s"
-msgstr "Mreža"
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Removable media automounting"
+msgstr "Automatsko montiranje prenosivog medija"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "Međusklop %s"
+#: ../../services.pm:1
+#, c-format
+msgid "Printing"
+msgstr "Ispisujem"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "C-Class lokalna mreža"
+msgid "Unkown driver"
+msgstr "Nepoznati model"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Raw printer (No driver)"
-msgstr "Raw printer (Bez upravljačkog programa)"
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ", using command %s"
-msgstr ", korištenjem komande %s"
+msgid "Create a new partition"
+msgstr "Stvori novu particiju"
 
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
 #, fuzzy, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr "na Novell poslužitelju \"%s\", pisač \"%s\""
+msgid "Driver:"
+msgstr "Upravljački program"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "na Windows poslužitelju \"%s\", dijeli \"%s\""
+msgid "unknown"
+msgstr "Nepoznati model"
 
-#: ../../printer/main.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", port %s"
+msgid "Use fdisk"
+msgstr "Koristi fdisk"
 
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "na LPD poslužitelju \"%s\", pisač \"%s\""
+#: ../../mouse.pm:1
+#, c-format
+msgid "MOVE YOUR WHEEL!"
+msgstr "POMAKNITE VAŠ KOTAČIĆ!"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ", printing to %s"
-msgstr ", ispis na %s"
+msgid "sent: "
+msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid ", multi-function device"
-msgstr ", multi-funkcionalan uređaj"
+msgid "Automatic IP"
+msgstr "Automatski IP"
 
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+"   Note that two different options are available after clicking the button:\n"
+"\n"
+"    * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+"    * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+"   This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"Eto. Instalacija je završena i vaš GNU/Linux sustav je spreman za "
+"korištenje.\n"
+"Samo pritisnite \"U redu\" da bi ponovno pokrenuli sustav. Možete pokrenuti\n"
+"GNU/Linux ili Windowse, što god želite (ako imate dva sustava), čim se\n"
+"računalo ponovno podigne.\n"
+"\n"
+"\"Napredno\" dugme (samo u modu za stručnjake) će prikazati još dva "
+"dugmeta: \n"
+"\n"
+" * \"napravi disketu za automatsku instalaciju\": za stvaranje "
+"instalacijske\n"
+"diskete koja će automatski izvršiti čitavu instalaciju bez pomoći "
+"operatora,\n"
+"sličnu instalaciji koju ste upravo namjestili.\n"
+"\n"
+"   Primjetite da su dvije različite opcije dostupne nakon pritiska na "
+"dugme:\n"
+"\n"
+"    * \"Replay\". Ovo je djelomice automatizirana instalacija, pošto\n"
+"particioniranje (i samo to) ostaje interaktivno;\n"
+"\n"
+"    * \"Automatska instalacija\". Potpuno automatizirana instalacija: tvrdi\n"
+"disk se u potpunosti prebrisava, svi podaci se gube.\n"
+"\n"
+"   Ova opcija je dosta korisna pri instaliranju na veći broj sličnih "
+"mašina.\n"
+"Pogledajte odjeljak za automatsku instalaciju na našem web siteu;\n"
+"\n"
+" * \"Snimi odabir paketa\"(*): snima prethodni odabir paketa. Potom, pri "
+"drugoj\n"
+"instalaciji, stavite disketu u pogon i pokrenite instalaciju odlaskom u\n"
+"ekran za pomoć pritiskom na [F1], te zadavanjem >>linux defcfg=\"floppy\"<<\n"
+"naredbe.\n"
+"\n"
+"(*) Trebate FAT formatiranu disketu (da bi je napravili u GNU/Linuxu, "
+"napišite\n"
+"\"mformat a:\")"
+
+#: ../../mouse.pm:1
 #, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multi-funkcionalan uređaj na HP JetDirectu"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
 
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ", multi-function device on USB"
-msgstr ", multi-funkcionalan uređaj na USBu"
+msgid "Configuration of a remote printer"
+msgstr "Postavke udaljenog pisača"
 
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", multi-funkcionalan uređaj na paralelnom portu \\/*%s"
+#: ../../lang.pm:1
+#, c-format
+msgid "Moldova"
+msgstr "Moldova"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid ", USB printer"
-msgstr ", USB pisač \\/*%s"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Naznačite da li prethodno želite obrisati vaš CDRW"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ", USB printer \\#%s"
-msgstr ", USB pisač \\/*%s"
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, c-format
+msgid "An online platform to respond to enterprise support needs."
+msgstr ""
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid " on parallel port \\#%s"
-msgstr " na paralelnom portu \\/*%s"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Local Printers"
-msgstr "Lokalni pisači"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "Url treba početi sa 'http:'"
 
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Pipe job into a command"
-msgstr "Proslijedi (pipe) na komandu"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Add a new rule at the end"
+msgstr "Dodaj novi pisač"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Enter a printer device URI"
-msgstr "Unesite URI pisača"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Printer on NetWare server"
-msgstr "Pisač na NetWare poslužitelju"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"Sada možete unijeti postavke za modul %s.\n"
+"Postavke su formata ``ime=vrijednost ime2=vrijednost2...''.\n"
+"Na primjer, ``io=0x300 irq=7''"
 
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Pisač na SMB/Windows 95/98/NT poslužitelju"
+msgid "Quit without writing the partition table?"
+msgstr "Da završim bez zapisivanje particijske tablice?"
 
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Mrežni pisač (TCP/socket)"
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Printer on remote lpd server"
-msgstr "Pisač na udaljenom lpd poslužitelju"
+msgid "Installing packages..."
+msgstr "Instaliram pakete..."
 
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Pisač na udaljenom CUPS poslužitelju"
+msgid "Dutch"
+msgstr "Nizozemska"
 
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Remote printer"
-msgstr "Udaljeni pisač"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "The following packages need to be installed:\n"
+msgstr "Slijedeći paketi će biti instalirani"
 
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Local printer"
-msgstr "Lokalni pisač"
+msgid "Angola"
+msgstr "Angola"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Configuring applications..."
-msgstr "Podešavam aplikacije..."
+msgid "service setting"
+msgstr "postavljanje servisa"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "Custom"
+msgstr "Prilagođeno"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Uklanjam pisač \"%s\" ..."
+msgid "File is already used by another loopback, choose another one"
+msgstr ""
+"Datoteku koristi neki drugi loopback. Molim izaberite neku drugu datoteku"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Da li stvarno želite ukloniti pisač \"%s\"?"
+msgid "Read-only"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Remove printer"
-msgstr "Ukloni pisač"
+msgid "Latvia"
+msgstr "Latvija"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "Saznajte kako koristiti ovaj pisač"
+msgid "No known driver"
+msgstr "X upravljački program"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Print test pages"
-msgstr "Ispiši probne stranice"
+msgid "1 MB"
+msgstr "1 MB"
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
 msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-msgstr "Nisam uspio ukloniti pisač \"%s\" iz StarOfficea/OpenOffice.org/GIMPa."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
+msgstr ""
+"Ovaj pisač je prepoznat, ako to nije onaj kojeg želite podešavati, "
+"upišiteime uređaja/datoteke u liniju za unos."
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/draksound:1
+#, fuzzy, c-format
 msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
-msgstr "Pisač \"%s\" je uspješno uklonjen iz StarOfficea/OpenOffice.org/GIMPa."
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
+"TV kartica nije prepoznata na vašem računalu. Provjerite da li je Linux-"
+"podržana Video/TV kartica ispravno uključena.\n"
+"\n"
+"\n"
+"Možete posjetiti našu bazu hardvera na:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Uklanjam pisač iz StarOfficea/OpenOffice.org/GIMPa"
+msgid "Configure Local Area Network..."
+msgstr "Podesi lokalnu mrežu..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Ukloni ovaj pisač iz StarOfficea/OpenOffice.org/GIMPa"
+msgid "Launch the sound system on your machine"
+msgstr "Pokreni zvučni sustav na vašem računalu"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr "Nisam uspio dodati \"%s\" StarOfficeu/OpenOffice.org/GIMPu."
+msgid "Preparing printer database..."
+msgstr "Pripremam bazu pisača ..."
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr "Pisač \"%s\" je uspješno dodan StarOfficeu/OpenOffice.org/GIMPu."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Information"
+msgstr "Prikaži informacije"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Dodavanje pisača StarOfficeu/OpenOffice.org/GIMPu"
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "No network card"
+msgstr "ne mogu pronaći niti jednu mrežnu karticu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
 #, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Dodaj ovaj pisač StarOfficeu/OpenOffice.org/GIMPu"
+msgid "Which filesystem do you want?"
+msgstr "Koji datotečni sustav želite?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Pisač \"%s\" je sada određen za podrazumijevani."
+msgid "3 buttons"
+msgstr "3 gumba"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Default printer"
-msgstr "Podrazumijevani pisač"
+msgid "Detailed information"
+msgstr "Detaljne informacije"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Set this printer as the default"
-msgstr "Odredi ovaj pisač za podrazumijevani"
+msgid "Malta"
+msgstr "Malta"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printer options"
-msgstr "Postavke pisača"
+msgid ""
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
+msgstr ""
+"Podrazumijevane postavke pisača\n"
+"\n"
+"Trebali biste se uvjeriti da li su veličina stranice, vrsta tinte/"
+"načinispisa (ako je dostupan) i hardverske postavke laserskih pisača "
+"(memorija,duplex jedinica, dodatne ladice) postavljeni ispravno. Primjetite "
+"dasa vrlo velikom kakvoćom ispisa/rezolucijom ispis može znatno usporiti."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "Printer manufacturer, model"
-msgstr "Proizvođač pisača, model"
+msgid "This floppy is not FAT formatted"
+msgstr "Ova disketa nije FAT formatirana"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Proizvođač pisača, model, pokretački program"
+msgid "Configuring network"
+msgstr "Podešavam mrežu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
 #, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Uklanjam stari pisač \"%s\" ..."
+msgid "Graphic Card"
+msgstr "Grafička kartica"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Printer name, description, location"
-msgstr "Ime pisača, opis, lokacija"
+msgid "Resizing Windows partition"
+msgstr "Izračunavam granice Windows datotečnog sustava"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Printer connection type"
-msgstr "Vrsta veze s pisačem"
+msgid "Provider dns 1 (optional)"
+msgstr "Pružateljev DNS 1 (opciono)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Raw printer"
-msgstr "Raw pisač"
+msgid "Cameroon"
+msgstr "Kamerun"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Do it!"
-msgstr "Napravi!"
+msgid ""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
+msgstr ""
+"Sada možete razdijeliti %s.\n"
+"Kada ste gotovi ne zaboravite spremiti postavu sa `w'"
 
 #: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
@@ -10599,483 +10551,349 @@ msgstr "Napravi!"
 msgid "Close"
 msgstr "Zatvori"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
 msgstr ""
-"Pisač %s\n"
-"Što želite promijeniti na ovom pisaču?"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Modify printer configuration"
-msgstr "Promijeni postavke pisača"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Add a new printer"
-msgstr "Dodaj novi pisač"
+msgid "Calendar"
+msgstr "Kalendar"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Normal Mode"
-msgstr "Normalni mod"
+msgid ""
+"Restore Selected\n"
+"Catalog Entry"
+msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Change the printing system"
-msgstr "Promijeni ispisni sustav"
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
+msgstr ""
+"Ukoliko želite koristiti udaljeni lpd pisač, morate unijetiime ispisnog "
+"poslužitelja te ime pisača na tom poslužitelju."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "CUPS configuration"
-msgstr "CUPS postavke"
+msgid "Iceland"
+msgstr "Iceland"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Osvježi popis pisača (za prikaz svih dostupnih udaljenih CUPS pisača)"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Osvježi popis pisača (za prikaz svih dostupnih udaljenih CUPS pisača)"
+msgid "consolehelper missing"
+msgstr "nedostaje consolehelper"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Navedeni pisači su podešeni. Dvostruko kliknite na pisač da bi mu "
-"promijenilipostavke; da ga odredite za podrazumijevani pisač; ili da bi "
-"pogledaliinformacije o njemu."
+msgid "stopped"
+msgstr "zaustavljen"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Printing system: "
-msgstr "Ispisni sustav:"
+msgid "Whether the FPU has an irq vector"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Checking installed software..."
-msgstr "Provjeravam instalirani softver..."
+msgid "Ext2"
+msgstr "Ext2"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Installing Foomatic..."
-msgstr "Instaliram Foomatic ..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Podešavam pisač \"%s\" ..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Podešavam pisač \"%s\" ..."
+msgid "Expand Tree"
+msgstr "Proširi stablo"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Reading printer data..."
-msgstr "Čitam podatke o pisaču ..."
+msgid ""
+"The old \"%s\" driver is blacklisted.\n"
+"\n"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Koji ispisni sustav (spooler) želite koristiti?"
+msgid "Expert Mode"
+msgstr "Ekspertni mod"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Select Printer Spooler"
-msgstr "Odaberite spooler pisača"
+msgid "Printer options"
+msgstr "Postavke pisača"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "Podrazumijevani pisač"
+msgid "Local Network adress"
+msgstr "C-Class lokalna mreža"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "Instaliram pakete..."
+msgid "Backup your System files. (/etc directory)"
+msgstr "Sigurnosno pohranjivanje vaših sustavskih datoteka ( /etc mapa )"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "Uklanjam %s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
 msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
 "\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
 "\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+"Do you want to install the updates ?"
 msgstr ""
-"Ispisni sustav (%s) se neće automatski pokretati kada se računalu pokrene.\n"
+"Imate mogućnost skidanja (downloada) paketa za dogradnju koji su\n"
+"izašli poslije nego što je distribucija postala raspoloživa.\n"
 "\n"
-"Moguće je da je automatsko pokretanje isključeno zbog prebacivanja na "
-"višusigurnosnu razinu, jer je ispisni sustav moguća točka napada.\n"
+"Dobit ćete sigurnosne popravke i popravke od grešaka, ali za nastavak\n"
+"trebate imati podešenu Internet vezu.\n"
 "\n"
-"Želite li ponovno uključiti automatsko podizanje ispisnog sustava?"
+"Da li želite instalirati dogradnju?"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Pokretanje ispisnog sustava prilikom podizanja sustava"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Samba Server"
+msgstr "NIS Poslužitelj"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Arguments: (arg, alert=1)\n"
 "\n"
-"Do you really want to configure printing on this machine?"
+"Enable/Disable IP spoofing protection."
 msgstr ""
-"Sada ćete instalirati ispisni sustav %s na sustav koji radi pod %s "
-"sigurnosnomrazinom.\n"
-"Ovaj ispisni sustav pokreće daemon (pozadinski proces) koji čeka na "
-"posloveispisa i rješava ih. Ovaj daemon je dostupan i udaljenim računalima "
-"prekomreže, te je tako moguće mjesto napada. Stoga se na ovoj sigurnosnoj "
-"razinisamo nekoliko izabranih daemona podrazumijevano pokreće.\n"
-"\n"
-"Da li stvarno želite namjestiti ispisivanje na ovom računalu?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instaliram ispisni sustav s %s sigurnosnom razinom."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "paranoid"
-msgstr "Paranoidna"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "high"
-msgstr "Visoka"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Restarting printing system..."
-msgstr "Ponovno pokrećem ispisni sutav ..."
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Configuration of a remote printer"
-msgstr "Postavke udaljenog pisača"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+msgid "Australian Optus cable TV"
 msgstr ""
-"Mreža nije pokrenuta. Provjerite postavke i hardver. Zatim probajte "
-"ponovnopodesiti vaš udaljeni pisač."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
 #, c-format
 msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
 msgstr ""
-"Postava mreže napravljena tijekom instalacije se ne može sada pokrenuti."
-"Provjerite da li je mreža dostupna poslije pokretanja sustava i "
-"ispravitepostavke korištenjem Mandrake kontrolnog centra, odjeljak \"Mreža i "
-"Internet\"/\"Veza\", i poslije podesite pisač, također iz Mandrake "
-"kontrolnog centra,odjeljak \"Hardver\"/\"Pisač\""
+"  <Tab>/<Alt-Tab> između elemenata  | <Space> bira | <F12> slijedeći zaslon"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Configure the network now"
-msgstr "Podesi mrežu"
+msgid "Subnet:"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Go on without configuring the network"
-msgstr "Nastavi bez podešavanja mreže"
+msgid "Zimbabwe"
+msgstr "Zimbabwe"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Sada ćete podesiti udaljeni pisač. Zahtjeva ispravni pristup mreži, aliona "
-"još nije podešena. Ako nastavite bez ispravne mreže, nećete moćikoristiti "
-"pisač kojeg sada podešavate. Kako želite nastaviti?"
+msgid "Please enter the host name or IP."
+msgstr "Upišite ime hosta ili IP."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Network functionality not configured"
-msgstr "Mreža nije podešena"
+msgid "When"
+msgstr "Kada"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Starting network..."
-msgstr "Pokrećem mrežu ..."
+msgid "Second DNS Server (optional)"
+msgstr "Drugi DNS poslužitelj (opciono)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Refreshing printer data..."
-msgstr "Osvježavam padatke o pisaču ..."
+msgid "Finland"
+msgstr "Finska"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Arguments: (arg)\n"
+"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
 msgstr ""
-"Prebacili ste vaš bivši podrazumijevani pisač(\"%s\"), da li bi trebao "
-"bitipodrazumijevani pisač i u novom sustavu %s?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Transfer printer configuration"
-msgstr "Prebaci postavke pisača"
+msgid "Color depth: %s\n"
+msgstr "Dubina boje: %s\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Transferring %s..."
-msgstr "Prebacujem %s ..."
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Ne možete odznačiti ovaj paket budući da ga treba nadograditi"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "New printer name"
-msgstr "Novo ime pisača"
+msgid "Loading from floppy"
+msgstr "Učitavam sa diskete"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
 msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
 msgstr ""
-"Pisač \"%s\" već postoji,\n"
-"da li zaista želite prepisati njegovu konfiguraciju?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
 #, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Ime pisača može sadržavati samo slova, brojeve i podvlaku"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Transfer"
-msgstr "Prebaci"
+msgid "Slovenia"
+msgstr "Slovenija"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"Enter a user\n"
+"%s"
 msgstr ""
-"Pisač \"%s\" već postoji na %s.\n"
-"Stisnite \"Prebaci\" da prepišete preko njega.\n"
-"Možete i upisati novo ime ili preskočiti ovaj pisač."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not transfer printers"
-msgstr "Ne prebacuj pisače"
+"Unesite korisnika\n"
+"%s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
 msgstr ""
-"\n"
-"Označite pisače koje želite prebaciti i stisnite \"Prebaci\"."
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Također, pisači podešeni sa PPD datotekama od svog proizvođača ili sanative "
-"CUPS pokretačkim programima se ne mogu prebaciti."
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "ProgressBar color selection"
+msgstr "Izabir modela pisača"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
 msgstr ""
-"Uz to, ovaj program ne može stvarati redove ili \"foomatic-configure\" sene "
-"može prebaciti."
+"Ovo su trenutni zapisi.\n"
+"Možete dodati još koji ili urediti postojeći."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD i LPRng ne podržavaju IPP pisače.\n"
+msgid "/dev/hda"
+msgstr "/dev/hda"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ podržava samo lokalne pisače, udaljene LPD pisače i socket/TCPpisače.\n"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ne podržava pisače na Novell poslužiteljima ili pisače koji "
-"šaljupodatke u naredbu slobodne forme.\n"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
 msgstr ""
-"Možete preslikati postavke pisača koje ste napravili za spooler %s na %s,vaš "
-"trenutni spooler. Svi konfiguracijski podaci (ime pisača, opis, lokacija,"
-"vrsta veze i podrazumijevane opcije) su preuzeti, ali ne i poslovi.\n"
-"Ne mogu se svi redovi prebaciti zbog:\n"
+"Pokreće komande zakazane sa at komandom u specifirano vrijeme kada\n"
+"je at pokrenut, i pokreće batch komande kada je prosječna zauzetost dovoljno "
+"niska."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
+msgid "Radio support:"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Vaš HP multi-funkcijski uređaj je automatski namješten za skeniranje. "
-"Sadamožete skenirati sa \"scanimage\" (\"scanimage -d hp:%s\" da odredite "
-"kojiskener, ako ih imate više) iz komandne linije ili s grafičkim sučeljima"
-"\"xscanimage\" ili \"xsane\". Ako koristite GIMP, također možete "
-"skeniratibiranjem odgovarajuće stavke u \"File\"/\"Acquire\" izborniku. "
-"Probajte\"man scanimage\" i \"man sane-hp\" u komandnoj liniji za više "
-"informacija.\n"
-"\n"
-"Ne koristite \"scannerdrake\" za ovaj uređaj!"
+msgid "Installing SANE packages..."
+msgstr "Instaliram pakete..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Printing test page(s)..."
-msgstr "Ispisujem probnu stranicu(e)..."
+msgid "boot disk creation"
+msgstr "pravljenje boot diskete"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Print option list"
-msgstr "Popis ispisnih opcija"
+msgid "LDAP"
+msgstr "LDAP"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Ispis na pisaču \"%s\""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Ispis/skeniranje na \"%s\""
+msgid "SILO"
+msgstr "SILO"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
 #, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Ispis/skeniranje na \"%s\""
+msgid "Change type"
+msgstr "Promijeni tip"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Ispis/skeniranje na \"%s\""
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "SILO instalacija"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-msgstr ""
-"Da bi saznali o dostupnim opcijama za trenutni pisač pročitajte ili "
-"popisprikazan dolje ili stisnite na \"Popis ispisnih opcija\".%s\n"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD/DVDROM to backup"
+msgstr "Koristi CD/DVDROM za pohranu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
 #, c-format
 msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
 "\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
 msgstr ""
+"Čestitam, instalacija je kompletna.\n"
+"Uklonite boot medij i pritisnite return za ponovno podizanje.\n"
 "\n"
-"\"%s\" i \"%s\" naredbe vam također omogućuju da podesite opcije za "
-"određeniposao ispisa. Jednostavno dodajte željene postavke u komandnu "
-"liniju, npr.\"%s <datoteka>\".\n"
+"\n"
+"Za informacije o popravcima koji su raspoloživi za ovo izdanje Mandrake "
+"Linux-a,\n"
+"konzultirajte Eratu raspoloživu na\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Informacije o konfiguriranju vašeg sustava je raspoloživo u poslije\n"
+"instalacijskom poglavlju od Official Mandrake Linux User's Guide."
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Možete također koristiti grafičko sučelje \"xpdq\" za namještanje opcijai "
-"upravljanje poslovima ispisa.\n"
-"Ako koristite KDE okružje, imate \"dugme za paniku\", ikonu na radnom stolu,"
-"nazvanu \"ZAUSTAVI pisač!\", koja zaustavlja sve poslove ispisa čim "
-"jestisnete. Ovo je korisno kad se, npr., zaglavi papir.\n"
+msgid "paranoid"
+msgstr "Paranoidna"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr "Ovjde pošalji izvještaj mailom poslije svake pohrane:"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
@@ -11088,296 +10906,243 @@ msgstr ""
 "dijalogamnogih aplikacija. Ali tamo ne upisujete ime datoteke jer datoteku "
 "za ispisdobavlja sama aplikacija.\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Da bi ispisali datoteku iz komandne linije (terminalskog prozora) "
-"koristitenaredbu \"%s <datoteka>\" ili \"%s <datoteka>\".\n"
+msgid "Resolution"
+msgstr "Rezolucija"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
 msgstr ""
-"Da bi dobili popis opcija dostupnih za trenutni pisač stisnite na "
-"\"Popisispisnih opcija\"."
+"Za ispis na SMB pisač, trebate navestiime SMB domaćina (Primjetite da može "
+"biti različit od TCP/IP imena računala) i vjerojatno IP adresu ispisnog "
+"poslužitelja, kao iime dijeljenog resursa za pisač kojem želite pristupiti i "
+"bilo kojeprimjenjivo korisničko ime, lozinku ili informacije o radnoj grupi."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg)\n"
 "\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+" Accept/Refuse icmp echo."
 msgstr ""
-"\n"
-"\"%s\" komanda dozvoljava da podesite opcije za pojedini posao ispisa.Samo "
-"dodajte željene postavke u komandnu liniju, npr. \"%s <datoteka>\"."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Da bi ipisali datoteku iz komandne linije (terminalski prozor) "
-"koristitekomandu \"%s <datoteka>\".\n"
+msgid "reconfigure"
+msgstr "ponovno postavi"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
 msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
 msgstr ""
-"Ovo je popis dostupnih opcija za ispis za trenutni pisač:\n"
-"\n"
+"Vaša kartica može imati 3D hadware akceleraciju podržanu od XFree %s,\n"
+"UPOZORAVAMO VAS DA JE OVO EKSPERIMENTALNA PODRŠKA I MOŽE ZAMRZNUTI VAŠE "
+"RAČUNALO."
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Xinetd Service"
+msgstr "Ispisni poslužitelj"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "access to network tools"
+msgstr "pristup rpm alatima"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
+msgid "Firmware-Upload for HP LaserJet 1000"
 msgstr ""
-"Ove komande možete također koristiti u \"Printing command\" polju dijalogaza "
-"ispis mnogih aplikacija, ali ovdje ne stavljate ime datoteke jerdatoteku za "
-"ispis dobavlja sama aplikacija.\n"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../share/advertising/03-software.pl:1
+#, fuzzy, c-format
 msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
 msgstr ""
-"Da bi ispisali datoteku iz komandne linije (terminalski prozor) koristiteili "
-"komandu \"%s <datoteka>\" ili grafički alat za ispis: \"xpp <datoteka>\"ili "
-"\"kprinter <datoteka>\". Grafički alati vam omogućuju da lako izaberetepisač "
-"i podesite opcije.\n"
+"Mandrake Linux 8.2 vam omogućuje da potpuno ostvarite "
+"multimedijalnipotencijal vašeg računala! Koristite najnovije programe za "
+"reprodukcijuglazbe i zvučnih datoteka, uređujte i organizirajte slike i "
+"fotografije,gledajte TV i video zapise, i još mnogo toga"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Did it work properly?"
-msgstr "Da li je sve radilo ispravno?"
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
 msgstr ""
-"Probna stranica(e) poslana je na pisač.\n"
-"Ponekad je potrebno par sekundi prije nego pisač počne s ispisom.\n"
+"Greška prilikom instalacije aboot-a, \n"
+"probati nasilno instalirati iako to može uništiti prvu particiju?"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
 msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
+"Options Description:\n"
+"\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+"    \n"
+"      If you check bzip2 compression, you will compress\n"
+"      your data better than gzip (about 2-10 %%).\n"
+"      This option is not checked by default because\n"
+"      this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+"      This option will update your backup, but this\n"
+"      option is not really useful because you need to\n"
+"      decompress your backup before you can update it.\n"
+"      \n"
+" - the .backupignore mode:\n"
+"\n"
+"      Like with cvs, Drakbackup will ignore all references\n"
+"      included in .backupignore files in each directories.\n"
+"      ex: \n"
+"         #> cat .backupignore\n"
+"         *.o\n"
+"         *~\n"
+"         ...\n"
+"      \n"
 "\n"
 msgstr ""
-"Testna/e stranica/e su poslane na pisač.\n"
-"Može potrajati neko vrijeme dok ispisivanje ne započne.\n"
-"Status ispisa:\n"
-"%s\n"
+"opis opcija:\n"
+"\n"
+"U ovom koraku Drakbackup će vam omogućiti da promijenite:\n"
+"\n"
+" - Način sažimanja:\n"
+"      \n"
+"        Ako označite bzip2 sažimanje, sažet ćete vaše\n"
+"        podatke bolje nego sa gzipom (oko 2-10 %).\n"
+"        Ova opcija nije podrazumijevano označena jer\n"
+"        ovaj način sažimanja zathjeva više vremena (oko 1000% više).\n"
+" \n"
+" - Način osvježavanja pohrane:\n"
+"\n"
+"        Ova opcija će osvježavati pohranu, ali nije baš\n"
+"        pretjerano korisna jer se prvo sve mora dekompresirati\n"
+"        prije nego što se osvježi.\n"
+"        \n"
+" - .backupignore način:\n"
+"\n"
+"        Kao kod cvsa, Drakbackup će ignorirati sve reference\n"
+"        iz .backupignore datoteka u svakoj od mapa.\n"
+"        ex: \n"
+"           /*> cat .backupignore*/\n"
+"           *.o\n"
+"           *~\n"
+"           ...\n"
+"      \n"
 "\n"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not print any test page"
-msgstr "Ne ispiši nikakve probne stranice"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Photo test page"
-msgstr "Foto testna stranica"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Alternativna testna stranica (A4)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Alternativna testna stranica (Letter)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Standard test page"
-msgstr "Standardna testna stranica"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print"
-msgstr "Ispiši"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "No test pages"
-msgstr "Bez testnih stranica"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr "Ukloni izabrano"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
 msgstr ""
-"Izaberite probne stranice koje želite ispisati.\n"
-"Primjetite: foto probna stranica se može vrlo dugo ispisivati, a na "
-"laserskimpisačima sa malo memorije i uopće se ne ispisati. U većini "
-"slučajeva jedovoljno ispisati standardnu probnu stranicu."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Test pages"
-msgstr "Testne stranice"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Da li želite postaviti ovaj pisač (\"%s\")\n"
-"kao podrazumijevani pisač?"
+msgid "Please fill or check the field below"
+msgstr "Molim ispunite ili provjerite vrijednost doljnjeg polja"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Option %s out of range!"
-msgstr "Opcija %s je izvan dosega!<"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Da li želite spremiti /etc/fstab promjene?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Option %s must be a number!"
-msgstr "Opcija %s mora biti broj!"
+msgid "Boot Protocol"
+msgstr "Boot protokol"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opcija %s mora biti cijeli broj!"
+msgid "LVM-disks %s\n"
+msgstr "LVM-diskovi %s\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Izabir modela pisača"
+msgid "The package %s is needed. Install it?"
+msgstr "Paket %s treba instalirati. Da li ga želite instalirati?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Podrazumijevane postavke pisača\n"
-"\n"
-"Trebali biste se uvjeriti da li su veličina stranice, vrsta tinte/"
-"načinispisa (ako je dostupan) i hardverske postavke laserskih pisača "
-"(memorija,duplex jedinica, dodatne ladice) postavljeni ispravno. Primjetite "
-"dasa vrlo velikom kakvoćom ispisa/rezolucijom ispis može znatno usporiti."
+msgid "On boot"
+msgstr "Pri pokretanju"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Bus identification"
+msgstr "Provjera autentičnosti"
+
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "Please make a backup of your data first"
+msgstr "Prvo napravite backup podataka"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-"Da bi mogli ispisivati sa svojim Lexmark inkjetom i ovom postavom, "
-"trebateLexmarkove inkjet pokretačke programe za pisače (http://www.lexmark."
-"com/).Otiđite na američki site i stisnite na \"Drivers\" dugme. Zatim "
-"izaberitevaš model i potom \"Linux\" kao operativni sustav. Pokretački "
-"programi dolazekao RPM paketi ili skripte za ljusku sa interaktivnom "
-"grafičkom instalacijom.Ne trebate raditi ovu konfiguraciju iz grafičkog "
-"sučelja. Odustanite odmahnakon pristajanja na licencu. Zatim ispišite "
-"stranice za namještanje glavepisača sa \"lexmarkmaintain\" i podesite "
-"postavke za namještanje glave saovim programom."
+msgid "Vatican"
+msgstr "Latvija"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet konfiguracija"
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "Imate više od jednog hard diska, na koji želite instalirati Linux?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+msgid "Boot ISO"
 msgstr ""
-"Pokretački programi za Inkjet pisače od Lexmarka podržavaju samo lokalne "
-"pisače,ne pisače na udaljenim računalima ili kutijama ispisnog poslužitelja. "
-"Spojitevaš pisač na lokalni port ili ga namjestite na računalu u kojeg je "
-"uključen."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Namještate OKI laserski winpisač. Ovi pisači koriste dosta poseban\n"
-"komunikacijski protokol i stoga će raditi samo ako su spojeni na "
-"prviparalelni port. Kada je vaš pisač spojen na drugi port ili na "
-"kutijuispisnog poslužitelja spojite ga na prvi paralelni port prije "
-"ispisaprobne stranice. Inače pisač neće raditi. Vašu postavu tipa veze "
-"pokretačkiprogram će ignorirati."
+msgid "Eritrea"
+msgstr "Eritrea"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinter konfiguracija"
+msgid "Remove List"
+msgstr "Popis za uklanjanje"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
 #, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+msgid "A customizable environment"
 msgstr ""
-"Ako vaš pisač nije prikazan, izaberite kombatibilni (pogledajte priručnik "
-"odpisača) ili neki slični."
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Inuktitut"
 msgstr ""
-"\n"
-"\n"
-"Molim, provjerite da li je Printerdrakeautomatski pronašao vaš model "
-"pisačaispravno. Pronađite ispravan model upopisu kada pokazivač pokazuje "
-"nakrivi model ili na \"Raw pisač\"."
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Morocco"
+msgstr "Moroko"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
@@ -11386,545 +11151,448 @@ msgstr "Kakav model pisača imate?"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printer model selection"
-msgstr "Izabir modela pisača"
+msgid "Add a new printer"
+msgstr "Dodaj novi pisač"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Reading printer database..."
-msgstr "Čitam bazu pisača ..."
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "          All of your selected data have been          "
+msgstr "          Svi vaši izabrani podaci su              "
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Select model manually"
-msgstr "Ručno izaberi model"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "<-- Delete"
+msgstr "Obriši"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The model is correct"
-msgstr "Model je točan"
+msgid "Nepal"
+msgstr "Nepal"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
+msgid "cpu # "
 msgstr ""
-"Printerdrake je usporedio ime modela koje je dobio autodetekcijom s "
-"modelimapopisanim u svojoj bazi podataka da bi našao koji najbolje odgovara. "
-"Ovaj izbormože biti pogrešan, posebice kada vaš pisač uopće nije u bazi "
-"pisača. Zatoprovjerite da li je izbor točan i stisnite \"Model je točan\" "
-"ako jest, a ako nestisnite \"Ručno izaberi model\" da bi mogli ručno "
-"izabrati model pisačana slijedećem ekranu.\n"
-"\n"
-"Za vaš pisač Printerdrake je našao:\n"
-"\n"
-"%s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Your printer model"
-msgstr "Model vašeg pisača"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Preparing printer database..."
-msgstr "Pripremam bazu pisača ..."
+msgid "chunk size"
+msgstr "chunk veličina"
 
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Location"
-msgstr "Lokacija"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "naredbe prije bootiranja ili 'c' za komandnu liniju."
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "Description"
-msgstr "Opis"
+msgid "Problems installing package %s"
+msgstr "Problem prilikom instaliranja paketa %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Name of printer"
-msgstr "Ime pisača"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Primit ćete upozorenje ako je opterećenje veće od ove vrijednosti"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
 msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
 msgstr ""
-"Svaki pisač treba ime (na primjer \"pisač\").Polja opisa i lokacije ne "
-"moraju biti popunjena. To su komentari za korisnike."
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add a scanner manually"
+msgstr "Ručno izaberi korisnika"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
+msgid "Reload partition table"
+msgstr "Ponovno učitaj particijsku tabelu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr ""
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Da, želim automatsko prijavljivanje sa ovim korisnikom i okružjem"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr ""
+msgid "Search for fonts in installed list"
+msgstr "Potraži fontove u popisu instaliranih"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr ", multi-funkcionalan uređaj"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "Lokalna mreža nije završila sa '.0', odustajem."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "Instaliram pakete..."
+msgid "Boot"
+msgstr "Root"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
 #, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "Instaliram pakete..."
+msgid "Tuner type:"
+msgstr "Promijeni tip"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Installing HPOJ package..."
-msgstr "Instaliram pakete..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
 msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
 msgstr ""
+"Ovdje biramo sustav za ispis za vaše računalo. Drugi OSovi možda nude "
+"jedan,\n"
+"ali Mandrake Linux nudi tri.\n"
+"\n"
+" * \"pdq\", što znači ``print, don't queue'' (ispiši, bez stavljanja u red), "
+"je\n"
+"izbor koji ćete koristiti ako imate izravnu vezu sa pisačem, želite izbjeći\n"
+"zastoje u ispisu i nemate pisače u mreži. Ima samo jednostavne mrežne "
+"mogućnosti\n"
+"i ponešto je spor za mrežu. Izaberite \"pdq\" ako ste novi u GNU/Linuxu. "
+"Možete\n"
+"promijeniti odabir poslije instalacije pokretanjem PrinterDrakea iz "
+"Mandrake\n"
+"kontrolnog centra i pritiskom na dugme za stručnjake.\n"
+"\n"
+" * \"%s\"``Common Unix Printing System'', je izvrstan za ispis na vašem "
+"lokalnom\n"
+"računalu, kao i za ispis na drugom kraju svijeta. Jednostavan je i može "
+"poslužiti\n"
+"kao poslužitelj i klijent za drevni \"lpd\" sustav za ispis. Dakle, "
+"kompatibilan je\n"
+"s ranijim sustavima. Ima mnoštvo trikova, ali osnovne postavke su gotovo\n"
+"jednostavne kao i \"pdq\". Ako trebate da vam emulira \"lpd\" poslužitelj, "
+"morate\n"
+"uključiti \"cups-lpd\" daemon. Ima grafička sučelja za ispis i za odabir "
+"opcija\n"
+"za ispis.\n"
+"\n"
+" * \"lprNG\"``line printer daemon New Generation''. Ovaj sustav može raditi\n"
+"otprilike iste stvari kao i ostali, ali će pisati i s pisačima u Novell "
+"mreži,\n"
+"jer podržava IPX protokol, i može ispisivati izravno u komande ljuske. Ako "
+"vam\n"
+"treba Novell ili ispis u komande bez korištenja preusmjeravanja, koristite "
+"lprNG.\n"
+"Inačem CUPS je najbolji jer je jednostavniji i bolje radi preko mreže."
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "A command line must be entered!"
-msgstr "Ispravan URI mora biti unešen!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Command line"
-msgstr "Ime domene"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Pipe into command"
-msgstr "Proslijedi (pipe) na komandu"
+msgid "\"Menu\" key"
+msgstr "\"Menu\" tipka"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Detected model: %s %s"
-msgstr "Detektirano %s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Ispravan URI mora biti unešen!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Device URI"
-msgstr "URI Uređaja pisača"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
 msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
 msgstr ""
-"Možete izravno odrediti da URI pristupa pisaču. URI mora odgovarati oliCUPS "
-"ili Foomatic specifikacijama. Primjetite da nisu svi URI tipovi podržani od "
-"svih spoolera."
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Port"
-msgstr "Port"
+"\n"
+"\n"
+"Molim, provjerite da li je Printerdrakeautomatski pronašao vaš model "
+"pisačaispravno. Pronađite ispravan model upopisu kada pokazivač pokazuje "
+"nakrivi model ili na \"Raw pisač\"."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
 #, fuzzy, c-format
-msgid "Printer host name or IP"
-msgstr "Ime računala od pisača"
+msgid "Security Administrator:"
+msgstr "Udaljeno administriranje"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "The port number should be an integer!"
-msgstr "Broj porta bi trebao biti cjelobrojni broj!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Nedostaje ime računala od pisača!"
+msgid "Please enter your login"
+msgstr "Upišite svoje korisničko ime"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check permissions of files in the users' home."
 msgstr ""
-"Za ispis na TCP ili socket pisač, trebate navestiime poslužitelja pisača te "
-"opciono broj porta. Na HP JetDirect poslužiteljimabroj porta je obično 9100, "
-"na drugim poslužiteljima može biti drugačije.Pogledajte priručnik vašeg "
-"hardvera."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
 msgstr ""
+"Nemate niti jednu internet vezu.\n"
+"Napravite jednu klikanjem na 'Podesi'"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Opcije TCP/Socket pisača"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Host \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", port %s"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", port %s"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Scanning network..."
-msgstr "Pokrećem mrežu ..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer auto-detection"
-msgstr "Koristi auto detekciju"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "NCP queue name missing!"
-msgstr "Nedostaje ime NCP reda!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "NCP server name missing!"
-msgstr "Ime NCP poslužitelja nedostaje!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "Ime reda pisača"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Server"
-msgstr "Ispisni poslužitelj"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Za ispis na NetWare pisač, trebate navestiNetWare ime ispisnog poslužitelja "
-"(Primjetite da može biti različit odnjegovog TCP/IP imena računala!) kao i "
-"ime ispisnog reda za pisač kojimželite pristupiti, te neko primjenjivo "
-"korisničko ime i lozinku."
+msgid "Fonts copy"
+msgstr "Kopiranje fontova"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "NetWare Printer Options"
-msgstr "Postavke NetWare pisača"
+msgid "Automated"
+msgstr "Automatski"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Povežite vaš pisač na Linux poslužitelj i dopustite da se vaša "
-"Windowsračunala povezuju na njega kao klijenti.\n"
-"\n"
-"Da li stvarno želite nastaviti namještati ovaj pisač kao što činite sada?"
+msgid "Do you want to test the configuration?"
+msgstr "Da li želite iskušati postavu ?"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Namjestite vaš Windows poslužitelj da omogućuje pristup pisaču preko "
-"IPPprotokola i namjestite ispis s ovog računala sa \"%s\" tipom veze u "
-"Printerdrakeu.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
+msgstr "Pisač \"%s\" je uspješno uklonjen iz StarOfficea/OpenOffice.org/GIMPa."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
 #, c-format
 msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+"               to the Internet as a client.\n"
 "\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High:       There are already some restrictions, and more automatic checks "
+"are run every night.\n"
 "\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher:    The security is now high enough to use the system as a server "
+"which can accept\n"
+"              connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+"           should choose a lower level.\n"
 "\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid:  This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+"                features are at their maximum\n"
 "\n"
+"Security Administrator:\n"
+"               If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+"            email)"
 msgstr ""
-"Sada ćete namjestiti ispis na Windows korisničkom računu sa lozinkom. "
-"Zboggreške u arhitekturi Samba klijent softvera, lozinka je stavljena u "
-"čistomtekstualnom obliku u komandnoj liniji Samba klijenta koji se koristi "
-"zaslanje ispisnog posla Windows poslužitelju. Tako je moguće da si svaki "
-"korisnikna ovom računalu ispiše lozinku na ekranu izdavanje komandi poput "
-"\"psauxwww\".\n"
-"\n"
-"Preporučamo da iskoristite jednu od slijedećih alternativa (u svim "
-"slučajevimamorate provjeriti da samo računala sa vaše lokalne mreže imaju "
-"pristup vašemWindows serveru, npr. putem vatrozida):\n"
-"\n"
-"Koristite korisnički račun bez lozinke na vašem Windows poslužitelju, kao"
-"\"GUEST\" račun ili posebni račun određen samo za ispis. Nemojte "
-"micatizaštitu lozinkom sa osobnog ili administratorskog računa.\n"
-"\n"
-"Namjestite vaš Windows poslužitelj da omogućuje pristup pisaču preko "
-"lpdprotokola. Zatim namjestite ispis s ovog računala sa \"%s\" tipom veze "
-"uPrinterdrakeu.\n"
-"\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "SECURITY WARNING!"
-msgstr "SIGURNOSNO UPOZORENJE!"
+msgid "Save packages selection"
+msgstr "Spremi odabir paketa"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Samba share name missing!"
-msgstr "Ime dijeljenog samba resursa nedostaje!"
+msgid "Remove the last item"
+msgstr "Ukloni posljednju stavku"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Ime poslužitelja ili IP poslužitelja mora biti naveden!"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr ""
+"Popis korisnika za povrat (samo je najnoviji nadnevak važan za svakog "
+"korisnika)"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "Koristi auto detekciju"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "No net boot images created!"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Workgroup"
-msgstr "Radna grupa"
+msgid "use pptp"
+msgstr "koristi pptp"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Share name"
-msgstr "Ime sharea"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Izaberite koji servisi trebaju biti startani automatski kod boot-a"
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server IP"
-msgstr "IP SMB poslužitelja"
+#, fuzzy, c-format
+msgid "Learn how to use this printer"
+msgstr "Saznajte kako koristiti ovaj pisač"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "SMB server host"
-msgstr "SMB poslužitelj"
+msgid "Configure the network now"
+msgstr "Podesi mrežu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
+msgid "Choose a mirror from which to get the packages"
+msgstr "Izaberite mirror sa kojeg želite skinuti pakete"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
 msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
 msgstr ""
-"Za ispis na SMB pisač, trebate navestiime SMB domaćina (Primjetite da može "
-"biti različit od TCP/IP imena računala) i vjerojatno IP adresu ispisnog "
-"poslužitelja, kao iime dijeljenog resursa za pisač kojem želite pristupiti i "
-"bilo kojeprimjenjivo korisničko ime, lozinku ili informacije o radnoj grupi."
+"Program koji mjenja veličinu FAT-a ne može rukovati vašom particijom, \n"
+"slijedeća greška se dogodila: %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Postavke SMB (Windows 9x/NT) pisača"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Ispis na pisaču \"%s\""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr "na Windows poslužitelju \"%s\", dijeli \"%s\""
+msgid "Which sector do you want to move it to?"
+msgstr "Na koji se sektor želite premjestiti?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Remote printer name missing!"
-msgstr "Nedostaje ime udaljenog pisača!"
+msgid "Do you want to click on this button?"
+msgstr "Da li želite kliknuti na ovaj gumb? "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Remote host name missing!"
-msgstr "Nedostaje ime računala udaljenog pisača!"
+msgid "Bahamas"
+msgstr "Bahami"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remote printer name"
-msgstr "Ime udaljenog pisača"
+msgid "Manual configuration"
+msgstr "Ručno namještanje"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Remote host name"
-msgstr "Udaljeno ime računala"
+msgid "search"
+msgstr "potraga"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
 msgstr ""
-"Ukoliko želite koristiti udaljeni lpd pisač, morate unijetiime ispisnog "
-"poslužitelja te ime pisača na tom poslužitelju."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Postavke udaljenog lpd pisača"
+"Ovaj paket učitava odabranu tastaturnu mapu kao što je postavljenu u\n"
+"/etc/sysconfig/keyboard. Ona se može odabrati koristeći kbdconfig alat.\n"
+"Trebali biste ostaviti ovo uključeno za većinu računala."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Manual configuration"
-msgstr "Ručno namještanje"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (instalacijski zaslonski upravljački program)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Morate izabrati/upisati pisač/uređaj!"
+msgid "Zeroconf host name must not contain a ."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files.  It is a good idea to always run syslog."
 msgstr ""
-" (paralelni portovi:/dev/lp0, /dev/lp1, ...,odgovara LPT1:, LPT2:, ..., prvi "
-"USB pisač: /dev/usb/lp0, drugi USB pisač: /dev/usb/lp1, ...)."
+"Syslog je resurs kojega koriste mnogi demoni kako bi logirali poruke\n"
+"u različite sustavske log datoteke. Dobra je ideja uvijek imati pokrenuti "
+"syslog."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown/Others"
+msgstr "Generički"
+
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Izaberite port na kojem se nalazi pisač."
+msgid "No TV Card detected!"
+msgstr "Nema TV kartice!"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Izaberite port preko kojeg je vaš pisač povezan ili upišite ime uređaja/"
-"datotekeu liniju za unos."
+msgid "Options"
+msgstr "Opcije"
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Izaberite port na kojem se nalazi pisač."
+#, c-format
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "Pisač \"%s\" je sada određen za podrazumijevani."
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#, c-format
 msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
 msgstr ""
-"Ovaj je popis svih prepoznatih pisača. Izaberite pisač kojeg želite podesiti."
-"Namještanje pisača će raditi potpuno automatski.Ako vaš pisač nije ispravno "
-"prepoznat ili ako biste radije ručno namještalipisač, uključite \"Ručno "
-"namještanje\"."
+"Namještate OKI laserski winpisač. Ovi pisači koriste dosta poseban\n"
+"komunikacijski protokol i stoga će raditi samo ako su spojeni na "
+"prviparalelni port. Kada je vaš pisač spojen na drugi port ili na "
+"kutijuispisnog poslužitelja spojite ga na prvi paralelni port prije "
+"ispisaprobne stranice. Inače pisač neće raditi. Vašu postavu tipa veze "
+"pokretačkiprogram će ignorirati."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Here is a list of all auto-detected printers. "
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr ""
+#, fuzzy, c-format
+msgid "Auto-detected"
+msgstr "Koristi auto detekciju"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
 #, fuzzy, c-format
 msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
 msgstr ""
-"Ovaj pisač je prepoznat. Namještanje pisača će raditi potpuno automatski.Ako "
-"vaš pisač nije ispravno prepoznat ili ako biste radije ručno "
-"namještalipisač, uključite \"Ručno namještanje\"."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Slijedeći paketi će biti uklonjeni"
+"Vaše računalo može biti konfigurirano da dijeli vlastitu Internet vezu.\n"
+"Sa tom značajkom, druga računala na vašoj lokalnoj mreži mogu koristiti "
+"Internet vezu ovog računala.\n"
+"\n"
+"Upozorenje: trebati ćete primjenjeni Mrežni Uređaj za postavljanje lokalne "
+"mreže (LAN)."
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../install_steps_interactive.pm:1
+#, c-format
 msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
 msgstr ""
-"Izaberite port preko kojeg je vaš pisač povezan ili upišite ime uređaja/"
-"datotekeu liniju za unos."
+"Nema slobodnog mjesta za 1 MB bootstrap! Instalacija će nastaviti, ali za "
+"podizanje vašeg sustava, trebati ćete napraviti bootstrap particiju u "
+"DiskDrake-u"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
@@ -11935,1794 +11603,1486 @@ msgstr ""
 "Izaberite port preko kojeg je vaš pisač povezan ili upišite ime uređaja/"
 "datotekeu liniju za unos."
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-"Izaberite port preko kojeg je vaš pisač povezan ili upišite ime uređaja/"
-"datotekeu liniju za unos."
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Refuse"
+msgstr "Odbij"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
+#, c-format
 msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
 msgstr ""
-"Ovaj pisač je prepoznat, ako to nije onaj kojeg želite podešavati, "
-"upišiteime uređaja/datoteke u liniju za unos."
+"HardDrake pokreće isprobavanje hardware-a, i opciono konfigurira\n"
+"novi/promjenjeni hardware."
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Available printers"
-msgstr "Lokalni pisač"
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#, c-format
+msgid "Remote Printers"
+msgstr "Udaljeni pisači"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No printer found!"
+#: ../../fs.pm:1
+#, c-format
+msgid "Creating and formatting file %s"
+msgstr "Stvaram i formatiram datoteku %s"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of sgid files."
 msgstr ""
-"Nije pronađen lokalni pisač!\n"
-"\n"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "You must enter a device or file name!"
-msgstr "Morate unijeti ime uređaja ili datoteke!"
+msgid ""
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose an existing LVM to add to"
+msgstr "Izaberite postojeći LVM na koji želite dodati "
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "xfs restart"
+msgstr "Ponovno pokreni xfs"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
 msgstr ""
-"Nije pronađen nijedan lokalni pisač! Za ručno instaliranje pisača upišiteime "
-"uređaja/datoteke u liniju za unos (paralelni portovi:/dev/lp0, /dev/lp1, ...,"
-"odgovara LPT1:, LPT2:, ..., prvi USB pisač: /dev/usb/lp0, drugi USB pisač:/"
-"dev/usb/lp1, ...)."
+"Pisač \"%s\" već postoji,\n"
+"da li zaista želite prepisati njegovu konfiguraciju?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Local Printer"
-msgstr "Lokalni pisač"
+msgid "No partition available"
+msgstr "nema dostupnih particija"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "USB printer \\#%s"
-msgstr "USB pisač \\/*%s"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use the scanners on hosts: "
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Pisač na paralelnom portu \\/*%s"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselected All"
+msgstr "Odselektiraj sve"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Pisač na SMB/Windows 95/98/NT poslužitelju"
+msgid "Domain Name Resolver"
+msgstr "Ime domene"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Mrežni pisač (TCP/socket)"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Encryption key (again)"
+msgstr "Enkripcijski ključ (ponovno)"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Detected %s"
-msgstr "Detektirano %s"
+msgid "Samba share name missing!"
+msgstr "Ime dijeljenog samba resursa nedostaje!"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Pisač na SMB/Windows 95/98/NT poslužitelju"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "True Type install done"
+msgstr "Instalacija True Typea gotova"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", port %s"
+msgid "Detection in progress"
+msgstr "detektiran na portu %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
+msgid "Build Whole Kernel -->"
 msgstr ""
-"\n"
-"Čestitamo, vaš pisač je sada instaliran i namješten!\n"
-"\n"
-"Možete pisati korištenjem \"Ispis\" naredbe u vašoj aplikaciji (obično u "
-"\"File\" izborniku).\n"
-"\n"
-"Ako želite dodati, maknuti ili promijeniti ime pisaču, ili želite "
-"promijenitipodrazumijevane opcije (ladicu za uvlačenje papira, kakvoću "
-"ispisa,...),izaberite \"Pisač\" u \"Hardver\" odjeljku Mandrake kontrolnog "
-"centra."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
+msgid "Welcome to %s"
+msgstr "Dobrodošli u %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Auto-detect printers connected directly to the local network"
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Molim, umetnite Update Modules disketu u pogon %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Automatski prepoznaj pisač"
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"is directly connected to your system"
+msgstr "Kopiraj fontove na vaš sustav"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "Dijeljenje datoteka"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
 msgstr ""
+"\n"
+"\"%s\" komanda dozvoljava da podesite opcije za pojedini posao ispisa.Samo "
+"dodajte željene postavke u komandnu liniju, npr. \"%s <datoteka>\"."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
 msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
 msgstr ""
+"U nekim slučajevima, %s upravljački program treba dodatne informacije da bi "
+"radio\n"
+"ispravno, iako normalno radi i bez toga. Da li želite specifirati te "
+"dodatne\n"
+"opcije za njega ili želite dozvoliti upravljačkom programu da isproba vaše\n"
+"računalo za informacije koje treba? Ponekad, isprobavanje može zamrznuti\n"
+"vaše računlo, ali ne bi trebalo izazvati nikakvu štetu."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+msgid "Not the correct CD label. Disk is labelled %s."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
 "\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
+"%s\n"
 "\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"Click on Configure to launch the setup wizard."
 msgstr ""
+"Dobro došli u alat za konfiguriranje dijeljenja Internet veze!\n"
 "\n"
-"Dobrodošli u Čarobnjak za namještanje pisača\n"
-"\n"
-"Ovaj čarobnjak vam omogućuje da instalirate lokalne ili udaljene pisače "
-"koji\n"
-"će se koristiti s ovog računala kao i sa drugih računala u mreži.\n"
+"%s\n"
 "\n"
-"Pita vas za sve potrebne informacije za namještanje pisača i daje vam "
-"pristupsvim dostupnim pokretačkim programima za pisače, njihovim opcijama i "
-"vrstamaveza prema pisačima."
+"Kliknite na Postavke ukoliko želite pokreniti čarobnjak za postavljanja."
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Cuba"
+msgstr "Kuba"
 
 #: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Searching for new printers..."
+msgstr "Lokalni pisač"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
+msgid "Belize"
+msgstr "Belize"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ")"
+msgid " (multi-session)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid " on "
-msgstr ""
+msgid "Kernel Boot Timeout"
+msgstr "Vrijeme čekanja podizanja kernela"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "("
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
 msgstr ""
+"Vaša video kartica može imati 3D ubrzanje samo sa XFree %s.\n"
+"Vaša kartica je podržana od XFree %s koji možda ima bolju podršku u 2D."
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "Podešavam pisač \"%s\" ..."
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "DrakX čarobnjak za particioniranje je pronašao slijedeća rješenja:"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Searching for new printers..."
-msgstr "Lokalni pisač"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Hungarian"
+msgstr "Mađarska"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
 msgstr ""
+"Izaberite vašeg pružatelja Internet usluga.\n"
+" Ako nije na popisu odaberite Drugi"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Da li želite pokreniti vašu vezu kod svakog podizanja (boot) sustava ?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr ""
-"Da li želite postaviti ovaj pisač (\"%s\")\n"
-"kao podrazumijevani pisač?"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Automatska vremenska sinkronizacija (koristeći NTP)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
+msgid "8 MB"
+msgstr "8 MB"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "Izaberite port na kojem se nalazi pisač."
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "LDAP Server"
+msgstr "LDAP Poslužitelj"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"There are no printers found which are directly connected to your machine"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops.  It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
 msgstr ""
+"PCMCIA podrška je obično za podržavanje stvari poput ethernet i\n"
+"modema u laptopima. Ona neće biti pokrenuta ukoliko nije tako\n"
+" konfigurirana zato je sigurno pokrenuti ju iako na instaliranom\n"
+" računalu ne treba."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
+msgid "Choose your country"
+msgstr "Odaberite vašu zemlju"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
 "\n"
-"There is one unknown printer directly connected to your system"
+"- System Files:\n"
 msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr "Kopiraj fontove na vaš sustav"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
 "\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Kopiraj fontove na vaš sustav"
+"- Sustavske datoteke:\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Kopiraj fontove na vaš sustav"
+msgid "Standalone Tools"
+msgstr "Konzolni Alati"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr "Dodaj novi pisač"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Where"
+msgstr "Gdje"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and one unknown printer"
-msgstr "Dodaj novi pisač"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "but not matching"
+msgstr "ali ne odgovara"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Checking your system..."
-msgstr "Ponovno pokrećem ispisni sutav ..."
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "Ponovno pokreni XFS"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Configuring PCMCIA cards..."
+msgstr "Podešavam PCMCIA kartice..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "kdesu missing"
+msgstr "kdesu nedostaje"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Examples for correct IPs:\n"
-msgstr ""
+msgid "Encryption key"
+msgstr "Enkripcijski ključ"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Model je točan"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "Ime NCP poslužitelja nedostaje!"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr "Christmas Otok"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "If no port is given, 631 will be taken as default."
+msgid "Installation of bootloader failed. The following error occured:"
 msgstr ""
+"Instalacija bootloader-a nije uspjela. Prijavljena je slijedeća grešska:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid "EIDE/SCSI channel"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Pisač na udaljenom CUPS poslužitelju"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "Ukloni izabrano"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "detektirano %s"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "Dodaj korisnika"
-
-#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
+msgid "Set this printer as the default"
+msgstr "Odredi ovaj pisač za podrazumijevani"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "IP address of host/network:"
-msgstr ""
+msgid "partition %s"
+msgstr "particija %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "Paranoid"
+msgstr "Paranoidan"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "NIS"
+msgstr "NIS"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Host/network IP address missing."
+msgid "<-- Del User"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "Location on the bus"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Sharing of local printers"
-msgstr "Lokalni pisač"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "Ukloni izabrano"
+msgid "No printer found!"
+msgstr ""
+"Nije pronađen lokalni pisač!\n"
+"\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Edit selected host/network"
+msgid "the vendor name of the device"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "Obriši cijeli disk"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (Uobičajeno)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
 "\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Automatska CUPS konfiguracija"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Promijeni ispisni sustav"
+msgid "Automatic reconfiguration"
+msgstr "Automatska rekonfiguracija"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "Receiving Speed:"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "Gotov"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "Na CUPS poslužitelju \"%s\""
+#: ../../lang.pm:1
+#, c-format
+msgid "Turks and Caicos Islands"
+msgstr "Turks and Caicos Islands"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "No remote machines"
-msgstr "(na ovom računalu)"
+msgid "permissions"
+msgstr "particija %s"
 
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "postava upozoravanja"
+#, c-format
+msgid "<- Previous"
+msgstr "<- Prijašnje"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Dijeljenje datoteka"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing configuration"
+msgstr "Postavke dijeljenja internet veze"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "Prebaci između ravno i grupno sortiranog"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
+msgid "Themes"
+msgstr "Teme"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+msgid "Options: %s"
+msgstr "Opcije: %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
 msgstr ""
+"Trenutno koristite %s kao Upravitelj Boot-a.\n"
+"Pritisnite na Podesi za pokretanje čarobnjaka za postavljanje."
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
+#, c-format
+msgid "OKI winprinter configuration"
 msgstr "OKI winprinter konfiguracija"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr ""
+msgid "Saint Helena"
+msgstr "Sveta Helena"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
+msgid "Security Level"
+msgstr "Sigurnosna razina"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
 msgid ""
+"Some steps are not completed.\n"
 "\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
 msgstr ""
+"Niste završili sve korake.\n"
 "\n"
-"Pisače na udaljenom CUPS poslužitelju ne morate konfiguriratiovdje; ti "
-"pisači će biti automatski pronađeni."
+"Želite li zaista završiti?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "How is the printer connected?"
-msgstr "Kako je pisač povezan?"
+msgid "Sudan"
+msgstr "Sudan"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Select Printer Connection"
-msgstr "Odaberite vezu pisača"
+msgid "Polish (qwertz layout)"
+msgstr "Poljska (qwertz raspored)"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Syria"
+msgstr "Suriname"
 
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
 #, c-format
 msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
 "\n"
-"Set the user umask."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
 "\n"
-"Set the shell timeout. A value of zero means no timeout."
 msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Dobro dosli u %s izbornik operativnih sustava!\n"
+"\n"
+"Izaberite operativni sustav u popisu iznad ili\n"
+"pričekajte %d sekundi za uobičajeno podizanje.\n"
 "\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
+msgid "Portuguese"
+msgstr "Portugalska"
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "Ime loopback datoteke:"
 
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "IP adresa treba biti oblika 1.2.3.4"
 
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Serbia"
+msgstr "serijski"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "Newzealand"
+msgstr "Novi Zeland"
 
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "Ovaj direktorij bi trebao ostati unutar root datotečnog sustava"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
+msgid "CapsLock key"
+msgstr "CapsLock tipka"
 
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "Install bootloader"
+msgstr "Instaliraj bootloader"
 
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "Odaberite količinu memorije na grafičkoj kartici"
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "if set to yes, check additions/removals of suid root files."
+msgid "Dynamic IP Address Pool:"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "LVM name?"
+msgstr "LVM ime?"
 
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "Pronašao sam %s %s međusklopova"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
+msgid "sticky-bit"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
+msgid "Post Install"
+msgstr "Post instalacija"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The internal domain name"
+msgstr "Novo ime pisača"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "Card IRQ"
+msgstr "IRQ kartice"
 
 #: ../../security/help.pm:1
 #, c-format
 msgid ""
 "Arguments: (umask)\n"
 "\n"
-"Set the root umask."
+"Set the user umask."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
+msgid "logdrake"
+msgstr "logdrake"
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+"Font Importation and monitoring "
+"application                                     \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts      : show all fonts that already exist from xls\n"
+"--strong         : strong verification of font.\n"
+"--install        : accept any font file and any directry.\n"
+"--uninstall      : uninstall any font or any directory of font.\n"
+"--replace        : replace all font if already exist\n"
+"--application    : 0 none application.\n"
+"                 : 1 all application available supported.\n"
+"                 : name_of_application like  so for staroffice \n"
+"                 : and gs for ghostscript for only this one."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Izaberite disketni pogon koji želite koristiti za izradu boot diskete"
 
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "LILO with text menu"
+msgstr "LILO sa tekstualnim menijem"
 
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
+msgid "Everything (no firewall)"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
+msgid "You must specify a kernel image"
+msgstr "Morate odrediti sliku kernela"
 
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
+msgid ", multi-function device on USB"
+msgstr ", multi-funkcionalan uređaj na USBu"
 
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
+#, fuzzy, c-format
+msgid "Do"
+msgstr "Gotov"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Spajam se na mirror kako bih pribavio popis dostupnih paketa"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "Lituanska AZERTY (stara)"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "Brazilska (ABNT-2)"
 
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+msgid "IP address of host/network:"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
+"the progress bar y coordinate\n"
+"of its upper left corner"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "SILO instalacija"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
+msgid "Saint Vincent and the Grenadines"
+msgstr "Saint Vincent and the Grenadines"
 
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/Datoteka/_Otvori"
 
 #: ../../security/help.pm:1
 #, c-format
 msgid ""
 "Arguments: (arg)\n"
 "\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
 msgstr ""
 
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "Pravim auto instalacijsku disketu"
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
+msgid "Open Firmware Delay"
+msgstr "Pauza Otvorenog Firmware-a"
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
-msgstr ""
+msgid "Hungary"
+msgstr "Madžarska"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Total progess"
+msgstr "ukupni progres"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "postava upozoravanja"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
+msgid "New Zealand"
+msgstr "Novi Zeland"
 
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
 msgstr ""
+"Već postoje neka ograničenja i više automatskih provjera se pokreće svake "
+"noći."
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "please choose the date to restore"
+msgstr "izaberite nadnevak za povrat"
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
+msgid "Switching from ext2 to ext3"
+msgstr "Mijenjam iz ext2 u ext3"
 
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "LPRng"
+msgstr "LPRng"
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "Netherlands Antilles"
+msgstr "Netherlands Antilles"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+msgid "Browse to new restore repository."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
 "\n"
-" Accept/Refuse icmp echo."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
 msgstr ""
+"\n"
+"Dobrodošli u Čarobnjak za namještanje pisača\n"
+"\n"
+"Ovaj čarobnjak vam omogućuje da instalirate lokalne ili udaljene pisače "
+"koji\n"
+"će se koristiti s ovog računala kao i sa drugih računala u mreži.\n"
+"\n"
+"Pita vas za sve potrebne informacije za namještanje pisača i daje vam "
+"pristupsvim dostupnim pokretačkim programima za pisače, njihovim opcijama i "
+"vrstamaveza prema pisačima."
 
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
+msgstr "Dodaj novi pisač"
+
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
+msgid "No ISDN PCI card found. Please select one on the next screen."
 msgstr ""
+"Nisam našao niti jednu ISDN PCI karticu. Molim izaberite vašu PCI karticu na "
+"slijedećem ekranu."
 
-#: ../../security/level.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Security Administrator (login or email)"
-msgstr ""
+msgid "GB"
+msgstr "GB"
 
-#: ../../security/level.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Biblioteka koja štiti od prekoračenja spremnika i format string napada."
+msgid "Please give a user name"
+msgstr "Molim dajte korisniku korisničko ime"
 
-#: ../../security/level.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Use libsafe for servers"
-msgstr "Koristi libsafe za poslužitelje"
+msgid "Enable CD Boot?"
+msgstr "Omogući CD podizanje?"
 
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Security level"
-msgstr "Sigurnosna razina"
+msgid " enter `void' for void entry"
+msgstr ""
 
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Please choose the desired security level"
-msgstr "Izaberite sigurnosni nivo"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "on Hard Drive"
+msgstr "na tvrdi disk"
 
-#: ../../security/level.pm:1
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "Opcije"
+msgid "Winmodem connection"
+msgstr "Normalna modemska veza"
 
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
 msgstr ""
-"Temeljeno na prijašnjoj razini, ali je sustav potpuno zatvoren.\n"
-"Sigurnosne značajke su na maksimumu."
+"\n"
+"Čestitamo, vaš pisač je sada instaliran i namješten!\n"
+"\n"
+"Možete pisati korištenjem \"Ispis\" naredbe u vašoj aplikaciji (obično u "
+"\"File\" izborniku).\n"
+"\n"
+"Ako želite dodati, maknuti ili promijeniti ime pisaču, ili želite "
+"promijenitipodrazumijevane opcije (ladicu za uvlačenje papira, kakvoću "
+"ispisa,...),izaberite \"Pisač\" u \"Hardver\" odjeljku Mandrake kontrolnog "
+"centra."
 
-#: ../../security/level.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
 msgstr ""
-"Sa ovom sigurnosnom razinom, korištenje ovog sustava kao poslužitelj postaje "
-"moguće.\n"
-"Sigurnost je sada toliko visoka da se sustav može koristiti kao poslužitelj\n"
-"koji prima zahtjeve od mnogo klijenata. Upozorenje: ako je vaše računalo "
-"samo klijent na Internetu, bolje da izaberete nižu razinu."
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
+msgid "Now, you can run xawtv (under X Window!) !\n"
 msgstr ""
-"Već postoje neka ograničenja i više automatskih provjera se pokreće svake "
-"noći."
 
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Nema dovoljno swapa za završetak instalacije, molim dodajte još"
+
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "%s on %s"
+msgstr "Port"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
 msgstr ""
-"Ovo je standardna sigurnosna razina preporučena za računala koja će biti "
-"korištena za spajanje na Internet kao klijent."
+"GNU/Linux upravlja vremenom po GMTu (Greenwich Mean Time) i prevodi ga u\n"
+"lokalno vrijeme prema vremenskoj zoni koju ste izabrali. Moguće je, doduše,\n"
+"ovo isključiti isključivanjem odabira \"Hardverski sat namješten na GMT\" "
+"tako\n"
+"da je hardverski sat jednak sustavskom. Ovo je korisno kada se na računalu\n"
+"nalazi drugi operacijski sustav, poput Windows.\n"
+"\n"
+"Opcija \"Automatska sinhronizacija vremena\" će automatski podešavati sat\n"
+"tako da će se povezivati sa vremenskim poslužiteljem na Internetu. Sa "
+"popisa\n"
+"izaberite poslužitelj najbliže vama. Naravno, morate imati ispravnu vezu sa\n"
+"Internetom da bi ovo radilo. Također, instalirat će vremenski poslužitelj "
+"na\n"
+"vaše računalo kojeg, opcionalno, mogu koristiti druga računala u vašoj\n"
+"lokalnoj mreži."
 
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Lozinke su sada uključene međutim još ne preporučam korištenje ovog računala "
-"u mrežnom okolišu."
+msgid "Which is your timezone?"
+msgstr "Koja je vaša vremenska zona?"
 
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ova razina se treba koristiti sa pažnjom. Ona čini vaš sustav mnogo lakšim "
-"za korištenje,\n"
-"ali vrlo osjetljiv: ne smije biti korišten za računala koja su povezana u "
-"mreži ili na Internet. Naime, nema lozinke za pristup."
+msgid "Guinea"
+msgstr "Gvineja"
 
-#: ../../security/level.pm:1
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "The system is now connected to the Internet."
+msgstr "Sustav je sada spojen na Internet."
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "South Georgia and the South Sandwich Island"
+
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Paranoid"
-msgstr "Paranoidan"
+msgid "Japan (broadcast)"
+msgstr ""
 
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Higher"
-msgstr "Viši"
+msgid "Mozambique"
+msgstr "Mozambique"
 
-#: ../../security/level.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "High"
-msgstr "Visok"
+msgid "Icon"
+msgstr "Ikona"
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Poor"
-msgstr "Slab"
+msgid "Please choose what you want to backup"
+msgstr "Izaberite što želite pohranjivati"
 
-#: ../../security/level.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Welcome To Crackers"
-msgstr "Dobrodošli Crackeri"
+msgid "256 colors (8 bits)"
+msgstr "256 boja (8 bita)"
 
-#: ../../standalone/XFdrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Molim ponovo se logirajte u %s kako bi aktivirali promjenjeno"
+msgid "Read-write"
+msgstr "Čitaj-piši"
 
-#: ../../standalone/XFdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Molim prvo se odjavite te pritisnite Ctrl-Alt-BackSpace"
+msgid "Size: %s\n"
+msgstr "Veličina: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr ""
+msgid "Hostname: "
+msgstr "Ime računala: "
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
+msgid "Chunk size %s\n"
+msgstr "Chunk veličina %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
+msgid "Build the future of Linux!"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Etherboot ISO image is %s"
-msgstr ""
+msgid "Local Printer"
+msgstr "Lokalni pisač"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "No floppy drive available!"
-msgstr "Disketni pogon nije dostupan"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Floppy can be removed now"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
 msgstr ""
+" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Couldn't access the floppy!"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Please insert floppy disk:"
-msgstr "Molim, umetnite Boot disketu u pogon %s"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Write Config"
-msgstr "ponovno postavi"
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "ADSL connection"
+msgstr "ADSL veza"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr ""
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "Nema postavki, molimo izaberite Čarobnjaka ili Napredno.\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
+msgid "Error!"
+msgstr "Greška!"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Napredne postavke"
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "cable connection detected"
+msgstr "detektirana kablovska veza"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "IP Range End:"
+msgid "Permission denied transferring %s to %s"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "IP Range Start:"
+msgid "/_Report Bug"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "NIS Poslužitelj"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "Ime domene"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resize"
+msgstr "Promijeni veličinu"
 
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Broadcast Address:"
-msgstr ""
+msgid "Dominica"
+msgstr "Dominica"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Subnet Mask:"
-msgstr ""
+msgid "Please enter the device name to use for backup"
+msgstr "Upišite ime uređaja kojeg ćete koristiti za sigurnosnu pohranu"
 
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Routers:"
-msgstr ""
+msgid "Resolution: %s\n"
+msgstr "Rezolucija: %s\n"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "Netmaska"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "matching"
+msgstr "odgovara"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
 #, c-format
-msgid "Subnet:"
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
 msgstr ""
+"Ne mogu pristupiti kernel modulima koji odgovaraju vašem kernelu (datoteka %"
+"s nedostaje), ovo obično znači da vaša disketa za dizanje sustava nije "
+"usklađena sainstalacijskim medijem (napravite noviju boot disketu)"
 
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
 msgstr ""
+"Molim odaberite ispravni port. Na primjer, COM1 port pod MS Windowsima\n"
+"se,  pod GNU/Linuxom zove \"ttyS0\"."
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "Podešavam..."
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "DHCP klijent"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "The following packages are going to be removed"
+msgstr "Slijedeći paketi će biti uklonjeni"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "<-- Edit Client"
-msgstr "DHCP klijent"
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#, c-format
+msgid "Connect to the Internet"
+msgstr "Spoji se na Internet"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Add Client -->"
-msgstr ""
+msgid "Use existing partitions"
+msgstr "Koristi postojeće particije"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "DHCP klijent"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Canadian (Quebec)"
+msgstr "Kanadska (Quebec)"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "DHCP klijent"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Mouse device: %s\n"
+msgstr "Uređaj miša: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "No net boot images created!"
-msgstr ""
+msgid "Reselect correct fonts"
+msgstr "Ponovno izaberi ispravne fontove"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "type: %s"
-msgstr "Vrsta: "
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "<-- Del User"
+msgid ""
+"Options Description:\n"
+"\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
+"\n"
 msgstr ""
+"opis opcija:\n"
+"\n"
+"Budite oprezni kada koristite ftp pohranu, jer se samo\n"
+"pohrane koje su već složene mogu slati polužitelju.\n"
+"Tako sada trebate složiti pohranu na vaš tvrdi disk prije\n"
+"no što je pošaljete poslužitelju.\n"
+"\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Add User -->"
-msgstr "Dodaj korisnika"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
 msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
 msgstr ""
+"Konačno ćete biti pitani da li želite vidjeti grafičko sučelje pri\n"
+"dizanju. Primjetite da ovo pitanje će biti pitano iako ne želite "
+"istestirati\n"
+"konfiguraciju. Vjerojatno, želite odgovoriti sa \"Ne\" ukoliko će vaše "
+"računalo\n"
+"raditi kao poslužitelj, ili ako niste bili uspješni u konfiguriranju vašeg\n"
+"zaslona."
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete All NBIs"
-msgstr "Izabrao sve"
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "We are now going to configure the %s connection."
+msgstr "Sada ćemo podesiti %s vezu."
 
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "Obriši"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "This will take a few minutes."
+msgid ""
+" [everything]\n"
+"       XFdrake [--noauto] monitor\n"
+"       XFdrake resolution"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Build All Kernels -->"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Koristi auto detekciju"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "Nije povezan"
+msgid "You've not selected any font"
+msgstr "nisam mogao naći nijedan font.\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "Language"
+msgstr "Odaberite jezik"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "No kernel selected!"
-msgstr "Nema TV kartice!"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer model selection"
+msgstr "Izabir modela pisača"
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Build Whole Kernel -->"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
 msgstr ""
+"Nakon mijenjanja tipa particije %s svi podaci na ovoj particiji biti će "
+"obrisani"
 
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
 #, c-format
-msgid "Boot ISO"
-msgstr ""
+msgid "%d seconds"
+msgstr "%d sekundi"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
 #, c-format
-msgid "Boot Floppy"
-msgstr ""
+msgid "Insert a blank floppy in drive %s"
+msgstr "Umetnite praznu disketu u pogon %s"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t   \n"
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-"        \t\tto help manage/customize these images.\n"
-"\n"
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-"        \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-"        \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-"        \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-"        \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address              192.168.192.3;\n"
-"\t\t\t\t\t#type                          fat;\n"
-"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-"        - Maintain /etc/exports:\n"
-"        \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \t\tdiskless clients.\n"
-"\n"
-"        \t\tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-"        \t\t\n"
-"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-"        \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-"        \t\tfiles.\n"
-"\n"
-"        - Per client system configuration files:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-"        \t\tbasis.\n"
-"\n"
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-"        \t\tdiskless client.\n"
-"\n"
-"        \t\tA typical tftp configuration file looks like:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"        \t\t(\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \t\tputs it's images.\n"
-"\n"
-"        - Create etherboot floppies/CDs:\n"
-"        \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
-"generate these images,\n"
-"        \t\tbased on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
-msgstr ""
+msgid "A valid URI must be entered!"
+msgstr "Ispravan URI mora biti unešen!"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid ""
-"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+msgid "Found \"%s\" interface do you want to use it ?"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
+msgid "Re-configure interface and DHCP server"
+msgstr "Re-konfiguriraj sučelje i DHCP poslužitelj"
 
-#: ../../standalone/drakTermServ:1
+#: ../../harddrake/sound.pm:1
 #, fuzzy, c-format
-msgid "Add/Del Clients"
-msgstr "DHCP klijent"
+msgid "Sound configuration"
+msgstr "CUPS postavke"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "Dodaj korisnika"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Photo test page"
+msgstr "Foto testna stranica"
 
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Net Boot Images"
-msgstr ""
+msgid "Custom disk partitioning"
+msgstr "Proizvoljno particioniranje diska"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Etherboot Floppy/ISO"
+msgid "Enter Printer Name and Comments"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Stop Server"
-msgstr "NIS Poslužitelj"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Start Server"
-msgstr "NIS Poslužitelj"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Disable Server"
-msgstr "Poslužitelj baza podataka"
-
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Enable Server"
-msgstr "Poslužitelj baza podataka"
+msgid ""
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "Kopiraj fontove na vaš sustav"
 
 #: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Prebaci postavke pisača"
+msgid "type: %s"
+msgstr "Vrsta: "
 
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Remove the last item"
-msgstr "Ukloni posljednju stavku"
+msgid "Slovakian (QWERTY)"
+msgstr "Slovačka (QWERTY)"
 
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Add an item"
-msgstr "Dodaj stavku"
+#: ../../standalone/draksound:1
+#, fuzzy, c-format
+msgid "No Sound Card detected!"
+msgstr "Nema TV kartice!"
 
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
 #, c-format
-msgid "Auto Install"
-msgstr "Automatska Instalacija"
+msgid "Mouse Port"
+msgstr "Port miša"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
 msgstr ""
-"Disketa je uspješno stvorena.\n"
-"Sada možete ponoviti svoju instalaciju"
 
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Congratulations!"
-msgstr "Čestitke!"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Ftp Server"
+msgstr "NIS Poslužitelj"
 
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg)\n"
 "\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"Enable/Disable msec hourly security check."
 msgstr ""
-"\n"
-"Dobrodošli.\n"
-"\n"
-"Parametri automatske instalacije su dostupni u odjeljku na lijevoj strani"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Creating auto install floppy"
-msgstr "Pravim auto instalacijsku disketu"
+msgid "%s fonts conversion"
+msgstr "pretvaranje pfm fontova"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Izaberite na kojem serijskom portu je miš priključen."
+
+#: ../../lang.pm:1
 #, c-format
-msgid "manual"
-msgstr ""
+msgid "Uganda"
+msgstr "Uganda"
 
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+"Arguments: (size)\n"
+"\n"
+"Set shell commands history size. A value of -1 means unlimited."
 msgstr ""
-"Izaberite za svaki korak da li će se ponoviti kao i u vašoj instalaciji, "
-"iliće se izvoditi ručno"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Postava automatskih koraka"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "replay"
-msgstr "Ponovno prikaži"
 
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
 "\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
 "\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
 "\n"
-"Do you want to continue?"
-msgstr ""
-"Sada ćete instalirati disketu za automatsku instalaciju. Ova mogućnost "
-"jedonekle opasna i mora se oprezno koristiti.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
 "\n"
-"Sa tom mogućnošću, moći ćete ponoviti instalaciju kako ste je proveli naovom "
-"računalu, s tim da ćete biti interaktivno priupitani u nekim koracima,da bi "
-"promijenili njihove vrijednosti.\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
 "\n"
-"Za maksimalnu sigurnost, particioniranje i formatiranje se nikad "
-"nećeobavljati automatski, što god izabrali prilikom instalacije na ovo "
-"računalo.\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
 "\n"
-"Želite li nastaviti?"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Postava automatske instalacije"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ne mogu naći potrebnu datoteku sa slikom '%s'."
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Error!"
-msgstr "Greška!"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
 "\n"
-"Restore Backup Problems:\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
 "\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
 "\n"
-"Problemi sa povratom pohrane:\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
 "\n"
-"Tijekom pohrane, drakbackup će provjeriti\n"
-"sve vaše datoteke u pohrani prije nego ih povrati.\n"
-"Prije povrata, Drakbackup će ukloniti vašu izvornu\n"
-"mapu, i izgubit ćete sve podatke. Važno je biti\n"
-"oprezan i ne mijenjati podatke u pohrani ručno.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
 "\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
 "\n"
-msgstr ""
-"opis opcija:\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
 "\n"
-"Budite oprezni kada koristite ftp pohranu, jer se samo\n"
-"pohrane koje su već složene mogu slati polužitelju.\n"
-"Tako sada trebate složiti pohranu na vaš tvrdi disk prije\n"
-"no što je pošaljete poslužitelju.\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
 "\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Comoros"
+
+#: ../../network/netconnect.pm:1
+#, c-format
 msgid ""
-"Description:\n"
 "\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
 "\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backups will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
 "\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
+"We are now going to configure the %s connection.\n"
 "\n"
 "\n"
+"Press OK to continue."
 msgstr ""
-"Opis:\n"
 "\n"
-"  Drakbackup se koristi za sigurnosnu pohranu vašeg sustava.\n"
-"  Tijekom podešavanja možete izabrati: \n"
-"\t- Sustavske datoteke, \n"
-"\t- Korisničke datoteke, \n"
-"\t- Ostale datoteke.\n"
-"\tčitav vaš sustav ... i ostale (poput Windows particija)\n"
 "\n"
-"  Drakbackup vam omogućuje da pohranite vaš sustav na:\n"
-"\t- Tvrdi disk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (s automatskim pokretanjem prilikom podizanja "
-"računala,\n"
-"spasonosnom opcijom i automatskom instalacijom.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Vrpcu.\n"
 "\n"
-"  Drakbackup vam omogućuje da povratite vaš sustav u\n"
-"  izabranu mapu.\n"
-"\n"
-"  Podrazumijevano, sve pohrane će biti u\n"
-"  /var/lib/drakbackup mapi\n"
-"\n"
-"  Datoteka s postavkama:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
-"\n"
-"\n"
-"Povrat:\n"
-"  \n"
-"  Tijekom povrata, DrakBackup će ukloniti \n"
-"  vašu izvornu mapu i potvrditi da li su sve\n"
-"  datoteke u pohrani ispravne. Preporučamo \n"
-"  da napravite posljednju pohranu prije povrata.\n"
+"Sada ćemo podesiti %s vezu.\n"
 "\n"
 "\n"
+"Pritisnite U redu za nastavak."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Yaboot mod"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "SAD (kabl)"
+
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
 msgstr ""
 
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Generički miš s 3 gumba"
+
 #: ../../standalone/drakbackup:1
+#, c-format
+msgid "Select another media to restore from"
+msgstr "Izaberite drugi medij s kojeg ćete povratiti podatke"
+
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
+msgid "Software Manager"
+msgstr "Ime sharea"
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
 msgid ""
-"restore description:\n"
+"Restore Description:\n"
 " \n"
 "Only the most recent date will be used, because with incremental \n"
 "backups it is necessary to restore one by one each older backup.\n"
@@ -13734,17 +13094,19 @@ msgid ""
 "\n"
 " - Incremental Backups:\n"
 "\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup.    \n"
 "\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
 "\n"
 msgstr ""
 "opis povrata:\n"
@@ -13772,4806 +13134,5482 @@ msgstr ""
 "\n"
 "\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"opis opcija:\n"
-"\n"
-" - Pohrani sustavske datoteke:\n"
-"        \n"
-"\tOva opcija vam omogućuje da pohranite svoju /etc mapu,\n"
-"\tkoja sadrži sve datoteke s postavkama. Budite\n"
-"\toprezni tijekom postupka povrata da ne bi prepisali:\n"
-"\t\t/etc/passed \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Pohrani korisničke datoteke: \n"
-"\n"
-"\tOva opcija vam omogućuje da izaberete sve korisnike koje\n"
-"\tželite pohraniti.\n"
-"\tDa bi uštedjeli prostor na disku, preporučamo da\n"
-"\tizostavite cache web preglednika.\n"
-"\n"
-" - Pohrani ostale datoteke: \n"
-"\n"
-"\tOva opcija vam omogućuje da dodate još podataka za pohranu.\n"
-"\tSa ovom pohranom nije trenutačno moguće izabrati\n"
-"\tinkrementalnu pohranu.\t\t\n"
-" \n"
-" - Inkrementalne pohrane:\n"
-"\n"
-"\tInkrementalna pohrana je najmoćnija opcija kod\n"
-"\tpohranjivanja. Omogućuje vam da pohranite\n"
-"\tsve svoje podatke prvi put, a potom samo one\n"
-"\tpromijenjene.\n"
-"\tZatim ćete moći, prilikom povrata,\n"
-"\tvratiti vaše podatke prema određenom\n"
-"\tnadnevku.\n"
-"\tAko niste izabrali ovu opciju sve\n"
-"\tstare pohrane će biti prebrisane prije svake pohrane.\n"
-"\n"
-"\n"
+msgid "Re-submit"
+msgstr "Ponovno Pošalji"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-"Neke greške tijekom slanja pošte su uzrokovane \n"
-" lošim postavkama postfixa. Da bi ih riješili, morate\n"
-" namjesiti myhostname ili mydomain u /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %%).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         #> cat .backupignore\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
+msgid "CD in place - continue."
 msgstr ""
-"opis opcija:\n"
-"\n"
-"U ovom koraku Drakbackup će vam omogućiti da promijenite:\n"
-"\n"
-" - Način sažimanja:\n"
-"      \n"
-"        Ako označite bzip2 sažimanje, sažet ćete vaše\n"
-"        podatke bolje nego sa gzipom (oko 2-10 %).\n"
-"        Ova opcija nije podrazumijevano označena jer\n"
-"        ovaj način sažimanja zathjeva više vremena (oko 1000% više).\n"
-" \n"
-" - Način osvježavanja pohrane:\n"
-"\n"
-"        Ova opcija će osvježavati pohranu, ali nije baš\n"
-"        pretjerano korisna jer se prvo sve mora dekompresirati\n"
-"        prije nego što se osvježi.\n"
-"        \n"
-" - .backupignore način:\n"
-"\n"
-"        Kao kod cvsa, Drakbackup će ignorirati sve reference\n"
-"        iz .backupignore datoteka u svakoj od mapa.\n"
-"        ex: \n"
-"           /*> cat .backupignore*/\n"
-"           *.o\n"
-"           *~\n"
-"           ...\n"
-"      \n"
-"\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "KB"
+msgstr "KB"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Restore"
-msgstr "Povrati"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Network & Internet"
+msgstr "Mrežni međusklop"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Backup Now"
-msgstr "Pohrani sada"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Lituanska \"fonetska\" QWERTY"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Advanced Configuration"
-msgstr "Napredne postavke"
+msgid "Net Boot Images"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Wizard Configuration"
-msgstr "Postavke čarobnjaka"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Sharing of local scanners"
+msgstr "Lokalni pisač"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "View Backup Configuration."
-msgstr "Pogledaj postavke sigurnosne pohrane"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
-msgid "Backup Now from configuration file"
-msgstr "Pohrani iz datoteke sa postavkama"
+msgid "Services and deamons"
+msgstr "Servisi i daemoni"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup postava"
+msgid "Remote host name missing!"
+msgstr "Nedostaje ime računala udaljenog pisača!"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Total Progress"
-msgstr "Ukupni progres"
+msgid "with /usr"
+msgstr "sa /usr"
 
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Sending files..."
-msgstr "Šaljem datoteke..."
+msgid "Network"
+msgstr "Mreža"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "files sending by FTP"
-msgstr "slanje datoteka FTPom"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Backup other files"
-msgstr "Pohrani ostale datoteke"
+msgid "This password is too simple"
+msgstr "Lozinka je prejednostavna"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Backup user files"
-msgstr "Pohrani korisničke datoteke"
+msgid "Slovakian (QWERTZ)"
+msgstr "Slovačka (QWERTZ)"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
 #, c-format
-msgid "Backup system files"
-msgstr "Pohrani sustavske datoteke"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Under Devel ... please wait."
-msgstr "Razvija se ... molimo sačekajte."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Stvarno malena instalacija (posebice bez urpmia)"
 
 #: ../../standalone/drakbackup:1
-#, c-format
+#, fuzzy, c-format
 msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Nije pronađena datoteka s postavkama \n"
-"pritisnite Čarobnjaka ili Napredno."
+"  Transfer  \n"
+"Now"
+msgstr "Prebaci"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please select data to backup..."
-msgstr "Izaberite podatke koje ćete pohraniti..."
+msgid "Use daemon"
+msgstr "Koristi daemon"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Please select media for backup..."
-msgstr "Izaberite medij za sigurnosnu pohranu..."
+msgid "Authentication"
+msgstr "Provjera autentičnosti"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please select data to restore..."
-msgstr "Izaberite podatke za povrat"
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Dodaj ovaj pisač StarOfficeu/OpenOffice.org/GIMPu"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Slijedeći paketi će biti instalirani"
+msgid "Additional CUPS servers: "
+msgstr "Na CUPS poslužitelju \"%s\""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
 msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
 msgstr ""
-"Greška tijekom slanja datoteke putem FTPa.\n"
-" Ispravite svoje FTP postavke."
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Where do you want to mount %s?"
+msgstr "Gdje želite montirati uređaj %s?"
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
+msgid "Restore Via Network"
+msgstr "Povrati korisnike"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Algerija"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd-veličina"
+
+#: ../../help.pm:1
+#, c-format
 msgid ""
-"Error during sendmail.\n"
-"  Your report mail was not sent.\n"
-"  Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
 msgstr ""
-"Greška tijekom slanja pošte\n"
-"  vaš mail sa izvještajem nije poslan\n"
-"  molimo podesite sendmail"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Next"
-msgstr "Slijedeće"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tPohrana koristi tar i gzip\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Previous"
-msgstr "Prijašnje"
+msgid "2 MB"
+msgstr "2 MB"
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Save"
-msgstr "Snimi"
+msgid ""
+"[OPTION]...\n"
+"  --no-confirmation      don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+"  --no-verify-rpm        don't verify packages signatures\n"
+"  --changelog-first      display changelog before filelist in the "
+"description window\n"
+"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Setting Default Printer..."
+msgstr "Podrazumijevani pisač"
+
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Build Backup"
-msgstr "Složi sigurnosnu pohranu"
+msgid "Interface %s (using module %s)"
+msgstr "Međusklop %s (koristi modul %s)"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "Povrati korisnike"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Name: %s\n"
+msgstr "Ime: %s\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Restore From Catalog"
-msgstr "Vrati particijsku tabelu"
+msgid "Generating preview ..."
+msgstr "Otkrivanje uređaja ..."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Browse to new restore repository."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "CD in place - continue."
+msgid "serial"
+msgstr "serijski"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "DVD-ROM"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Custom Restore"
-msgstr "Prilagođena pohrana"
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Gruzijska  (\"Latin\" raspored)"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
 #, c-format
-msgid "Restore all backups"
-msgstr "Povrati sve pohrane"
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
 #, fuzzy, c-format
-msgid "Restore Failed..."
-msgstr "Povrati ostalo"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"Sada možete unijeti opcije za modul %s.\n"
+"Primjetite da svaka adresa treba biti unešena sa prefiksom 0x kao '0x123'"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
 #, c-format
-msgid "Files Restored..."
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Path or Module required"
-msgstr ""
+msgid "Kenya"
+msgstr "Kenija"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Hostname required"
-msgstr "Ime računala: "
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``Unmount'' first"
+msgstr "Prvo pritisnite ``Demontiraj''"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Username required"
-msgstr "Korisničko ime"
+msgid "Installing mtools packages..."
+msgstr "Instaliram pakete..."
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
+#, c-format
+msgid "You must specify a root partition"
+msgstr "Morate odrediti root particiju"
+
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Password required"
-msgstr "Lozinka"
+msgid "first step creation"
+msgstr "pravljenje boot diskete"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Host Path or Module"
-msgstr ""
+msgid "Both Shift keys simultaneously"
+msgstr "Obe Shift tipke istodobno"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Host Name"
-msgstr "Ime računala"
+msgid "Select a scanner model"
+msgstr "Odaberite skener"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr ""
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR Nova Generacija"
 
 #: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Via Network"
-msgstr "Povrati korisnike"
+#, c-format
+msgid "Drakbackup Configuration"
+msgstr "Drakbackup postava"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
+msgid "Save as.."
+msgstr "Snimi kao.."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
 msgstr ""
+"Ovo sučelje još nije podešeno.\n"
+"Pokrenite čarobnjak za postavu u glavnom prozoru"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore From Tape"
-msgstr "Vrati particijsku tabelu"
-
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
+msgid "Korea (North)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
+msgid "Autologin"
+msgstr "Auto-prijava"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
 #, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "Povrati s tvrdog diska"
+msgid "System configuration"
+msgstr "postava upozoravanja"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup files not found at %s."
-msgstr "Pohranjene datoteke su oštećene"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Domain Admin Password"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
 msgid ""
-"Change\n"
-"Restore Path"
-msgstr "Povrati ostalo"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "Ukloni izabrano"
+msgid "Configuring printer ..."
+msgstr "Podešavam pisač \"%s\" ..."
 
-#: ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "Remove user directories before restore."
-msgstr "Ukloni mape korisnika prije povrata."
+msgid "MB"
+msgstr "MB"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
 msgstr ""
-"Napravi novu sigurnosnu pohranu prije povrata (samo za inkrementalne "
-"pohrane.)"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "select path to restore (instead of /)"
-msgstr "izaberi putanju za povrat (umjesto / )"
-
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Restore Other"
-msgstr "Povrati ostalo"
+msgid "Virgin Islands (British)"
+msgstr "Djevičanski Otoci (Britanski)"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Restore Users"
-msgstr "Povrati korisnike"
+msgid "Bermuda"
+msgstr "Bermuda"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Restore system"
-msgstr "Povrati sustav"
+msgid "click here if you are sure."
+msgstr "stisnite ovdje ako ste sigurni"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Other Media"
-msgstr "Ostali mediji"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"Nije pronađena datoteka s postavkama \n"
+"pritisnite Čarobnjaka ili Napredno."
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Select another media to restore from"
-msgstr "Izaberite drugi medij s kojeg ćete povratiti podatke"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Gore su popisane postojeće Linux particije pronađene na\n"
+"vašem hard disku. Možete zadržati izbore napravljene od strane čarobnjaka, "
+"one su dobre za\n"
+"uobičajenu upotrebu. Ukoliko promjenite izbore, morate barem definirati "
+"root\n"
+"particiju (\"/\"). Nemojte izabrati premalu particiju jer nećete moći \n"
+"instalirati dovoljno software-a. Ako želite spremati vaše podatke na "
+"posebnoj particiji,\n"
+"trebate također izabrati \"/home\" (jedino moguće ako imate više od jedne\n"
+"raspoložive Linux particije).\n"
+"\n"
+"\n"
+"Za informaciju, svaka particija je popisana kako slijedi: \"Ime\", "
+"\"Kapacitet\".\n"
+"\n"
+"\n"
+"\"Ime\" je kodirano kako slijedi: \"tip hard diska\", \"broj hard diska\",\n"
+"\"broj particije\" (naprimjer, \"hda1\").\n"
+"\n"
+"\n"
+"\"Tip hard diska\" je \"hd\" ukoliko je hard disk - IDE hard disk i \"sd\"\n"
+"ukoliko je on SCSI hard disk.\n"
+"\n"
+"\n"
+"\"Broj hard diska\" je uvijek slovo poslije \"hd\" ili \"sd\". Sa IDE hard "
+"diskovima:\n"
+"\n"
+" * \"a\" znači \"master hard disk na primarnom IDE kontroleru\";\n"
+"\n"
+" * \"b\" znači \"slave hard disk na primarnom IDE kontroleru\";\n"
+"\n"
+" * \"c\" znači \"master hard disk na sekundarnom IDE kontroleru\";\n"
+"\n"
+" * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\".\n"
+"\n"
+"\n"
+"Sa SCSI hard diskovima, \"a\" znači \"primarni hard disk\", \"b\" znači "
+"\"sekundarni hard disk\", itd..."
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#, fuzzy, c-format
+msgid "Remove"
+msgstr "Popis za uklanjanje"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "Upišite mapu u koju ste pohranili podatke"
+msgid "Lesotho"
+msgstr "Lesotho"
 
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
 #, c-format
-msgid "Restore from Hard Disk."
-msgstr "Povrati s tvrdog diska"
+msgid "utopia 25"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Use quota for backup files."
-msgstr "Koristi quotu za pohranjene datoteke"
+msgid "Pipe job into a command"
+msgstr "Proslijedi (pipe) na komandu"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+msgid "new dynamic device name generated by core kernel devfs"
 msgstr ""
-"Upišite maksimalnu dozvoljenu\n"
-" veličinu za Drakbackup"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Please enter the directory to save:"
-msgstr "Upišite mapu za snimanje:"
+msgid "Yes"
+msgstr "Da"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Koristi tvrdi disk za pohranu"
+msgid "Cote d'Ivoire"
+msgstr "Cote d'Ivoire"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "please choose the date to restore"
-msgstr "izaberite nadnevak za povrat"
+msgid "Which protocol do you want to use?"
+msgstr "Koji protokol želite koristiti ?"
 
 #: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Progress"
+msgstr "Povrati korisnike"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Backup the system files before:"
-msgstr "Pohrani sustavske datoteke prije:"
+msgid "Estonia"
+msgstr "Estonija"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Choose the host on which the local scanners should be made available:"
 msgstr ""
-"Popis korisnika za povrat (samo je najnoviji nadnevak važan za svakog "
-"korisnika)"
 
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "OK to restore the other files."
-msgstr "U redu da bi povratili ostale datoteke"
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Imate rupu u svojoj particijskoj tablici međutim ja je ne mogu iskoristiti.\n"
+"Jedino rješenje je da pomaknete vašu primarnu particiju kako bi rupa bila\n"
+"odmah do proširenih particija."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Channel"
+msgstr "Odustani"
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, c-format
-msgid "         Restore Configuration       "
-msgstr "         Povrati postavke          "
+msgid "Add"
+msgstr "Dodaj"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          Uspješno povraćeni na %s          "
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Dijeljenje veze prema internetu nije bilo konfigurirano."
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "          All of your selected data have been          "
-msgstr "          Svi vaši izabrani podaci su              "
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Backup files are corrupted"
-msgstr "Pohranjene datoteke su oštećene"
+msgid " Error while sending mail. \n"
+msgstr "Greška prilikom čitanja datoteke %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Molimo poništite odabir ili ga uklonite idući put"
+msgid "Keyboard"
+msgstr "Tipkovnica"
 
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
 msgstr ""
-"Popis oštećenih podataka:\n"
-"\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
 msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
 msgstr ""
-"Popis podataka za povrat:\n"
-"\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Nema postavki, molimo izaberite Čarobnjaka ili Napredno.\n"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-Mrežu FTPom.\n"
+msgid "Choose the connection you want to configure"
+msgstr "Izaberite vezu koju želite podesiti"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
 #, fuzzy, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Mrežu FTPom.\n"
+msgid "Please wait, setting security level..."
+msgstr "Podešavam sigurnosni nivo"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
 #, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Mrežu SSHom.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Mrežu FTPom.\n"
+msgid "Configuring network device %s"
+msgstr "Podešavam mrežni uređaj %s"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\t-Tape \n"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "Aktiviraj sada"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
 msgstr ""
+"Molimo izaberite sa kojim mrežnim adapterom se želite priključiti na Internet"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
+msgid "Finding packages to upgrade..."
+msgstr "Tražim pakete koje mogu nadograditi"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Tvrdi disk.\n"
+msgid "Mount point: "
+msgstr "Mjesto montiranja:"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Daemon (%s) uključi :\n"
+msgid "parse all fonts"
+msgstr "parsiraj sve fontove"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tPohrana koristi tar i gzip\n"
+msgid "With X"
+msgstr "Sa X-ima"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tPohrana koristi tar i bzip2\n"
+msgid "Multi-head configuration"
+msgstr "Više-zaslonska postava"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tIzostavi sustavske datoteke\n"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "No browser available! Please install one"
+msgstr "Screenshotovi će biti raspoloživi poslije instalaciju u %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
 #, c-format
 msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
 "\n"
-"- Options:\n"
+"%s"
 msgstr ""
+"Zadrži promjene?\n"
+"Trenutna postava je:\n"
 "\n"
-"- Opcije:\n"
+"%s"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t korisničko ime: %s\n"
-"\t\t u putanju: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "ReiserFS se ne može koristiti na particijama koje su manje od 32 MB"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
 msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
 msgstr ""
-"\n"
-"Snimi FTPom na host: %s\n"
+"Rwho protokol omogućava udaljenim korisnicima da dobiju popis svih\n"
+"korisnika prijavljenih na računalo na kojima je pokrenut rwho (slično finger-"
+"u)."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "\t\tErase=%s"
-msgstr ""
+msgid "Domain name"
+msgstr "Ime domene"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"Snimi FTPom na host: %s\n"
+msgid "Sharing of local printers"
+msgstr "Lokalni pisač"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid " (multi-session)"
-msgstr ""
+#: ../../install_messages.pm:1
+#, fuzzy, c-format
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakesoft.com/sales/contact"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid " on device: %s"
-msgstr "Uređaj miša: %s\n"
+msgid "Available printers"
+msgstr "Lokalni pisač"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "RW"
-msgstr ""
+msgid "Empty"
+msgstr "Prazno"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
 "\n"
-"- Burn to CD"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+"   the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
+msgid "text width"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-"\n"
-"- Snimi na tvrdi disk u putanju: %s\n"
+msgid "Where do you want to mount device %s?"
+msgstr "Gdje želite montirati uređaj %s?"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
+msgid "The default lease (in seconds)"
 msgstr ""
-"\n"
-"- Druge datoteke:\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Interface \"%s\""
+msgstr "Međusklop %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Sa osnovnom dokumentacijom (preporučeno!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 gumb"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"- User Files:\n"
+"There are %d unknown printers directly connected to your system"
 msgstr ""
-"\n"
-"- Korisničke datoteke:\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
 #, c-format
-msgid ""
-"\n"
-"- System Files:\n"
+msgid "Test"
 msgstr ""
-"\n"
-"- Sustavske datoteke:\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg)\n"
 "\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
 msgstr ""
-"\n"
-"Izvori za pohranu: \n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Select user manually"
-msgstr "Ručno izaberi korisnika"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Backup Users"
-msgstr "Pohrani korisnike"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Korea"
+msgstr "Više"
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Backup system"
-msgstr "Pohrani sustav"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Vaš izbor? (uobičajeno `%s'%s) "
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please choose what you want to backup"
-msgstr "Izaberite što želite pohranjivati"
+msgid "Raw printer"
+msgstr "Raw pisač"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "on Tape Device"
+msgid "official vendor name of the cpu"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "on CDROM"
-msgstr ""
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Vendor"
+msgstr "Vrati"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "across Network"
-msgstr "preko mreže"
+msgid "Interface %s"
+msgstr "Međusklop %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
 #, c-format
-msgid "on Hard Drive"
-msgstr "na tvrdi disk"
+msgid "Configure mouse"
+msgstr "Podesi miš"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Please choose where you want to backup"
-msgstr "Izaberite gdje želite pohranjivati"
+msgid "Choose the mount points"
+msgstr "Odaberite mjesta montiranja"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "More Options"
-msgstr "Još opcija"
+msgid "OK"
+msgstr "U redu"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "When"
-msgstr "Kada"
+msgid "Yugoslavian (latin)"
+msgstr "Jugoslavenska (latinična)"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Where"
-msgstr "Gdje"
+msgid "Installing"
+msgstr "Instaliram"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "What"
-msgstr "Što"
+msgid "Launch userdrake"
+msgstr "Pokreni userdrake"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Is this an install or an upgrade?"
+msgstr "Da li je ovo instalacija ili nadogradnja?"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "Interna ISDN kartica"
+
+#: ../../share/advertising/02-community.pl:1
+#, fuzzy, c-format
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"Upoznajte Open Source zajednicu i postanite članom. Učite, podučavajte "
+"ipomažite drugima učestvovanjem u diskusijama u mnogim forumima koje "
+"ćetepronaći na \"Community\" web stranicama"
+
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
 msgstr ""
+"Čestitam, mrežna i internet konfiguracija je završena.\n"
+"\n"
+"Konfiguracija će sada biti primjenjena na vašem sustavu.\n"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Ovjde pošalji izvještaj mailom poslije svake pohrane:"
+msgid "\t-Hard drive.\n"
+msgstr "\t-Tvrdi disk.\n"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../help.pm:1
+#, c-format
 msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
 "\n"
-"Note that currently all 'net' medias also use the hard drive."
-msgstr "Osigurajte da je cron daemon uključen u vaše servise"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Izaberite medij za pohranu."
+msgid "Printer on remote CUPS server"
+msgstr "Pisač na udaljenom CUPS poslužitelju"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Izaberite vremenski razmak između\n"
-"dvije sigurnosne pohrane"
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr "Nisam uspio ukloniti pisač \"%s\" iz StarOfficea/OpenOffice.org/GIMPa."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "delete"
+msgstr "Obriši"
+
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Use daemon"
-msgstr "Koristi daemon"
+msgid "here if no."
+msgstr "ovdje ako niste."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "Ime računala"
+
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "monthly"
-msgstr "svaki mjesec"
+msgid "The maximum lease (in seconds)"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
 #, c-format
-msgid "weekly"
-msgstr "svaki tjedan"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Izaberite na kojem serijskom portu je miš priključen."
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "daily"
-msgstr "svaki dan"
+msgid "Did it work properly?"
+msgstr "Da li je sve radilo ispravno?"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "hourly"
-msgstr "svaki sat"
+msgid "Poor"
+msgstr "Slab"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "HardDrive / NFS"
-msgstr "Tvrdi disk / NFS"
+msgid "The DHCP start range"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "Grenada"
+msgstr "Grenada"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Upišite mapu za snimanje:"
+#: ../../any.pm:1
+#, c-format
+msgid "Unsafe"
+msgstr "Nesigurno"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Naznačite da li prethodno želite obrisati vaš CDRW"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ", %s sectors"
+msgstr ", %s sektora"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Naznačite da li prethodno želite obrisati vaš CDRW"
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "Ne"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Naznačite da li prethodno želite obrisati vaš CDRW"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please enter the device name to use for backup"
-msgstr "Upišite ime uređaja kojeg ćete koristiti za sigurnosnu pohranu"
+msgid "Guadeloupe"
+msgstr "Guadeloupe"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Use tape to backup"
-msgstr "Koristi vrpcu za pohranu"
+msgid "could not find any font.\n"
+msgstr "nisam mogao naći nijedan font.\n"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "No CD device defined!"
-msgstr "Odaberite datoteku"
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Da li želite da BackSpace vrati Delete u konzoli?"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Upišite ime vašeg CD snimača\n"
-" ex: 0,1,0"
+msgid "Vertical refresh rate"
+msgstr "Vertikalna vrijednost osvježavanja"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Naznačite da li koristite CDRW medij"
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#, c-format
+msgid "Entering step `%s'\n"
+msgstr "Pokrećem korak `%s'\n"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Naznačite da li koristite CDRW medij"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid " Erase Now "
-msgstr "Prebaci"
+msgid "Removing %s ..."
+msgstr "Uklanjam %s"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Naznačite da li prethodno želite obrisati vaš CDRW"
+#: ../../lang.pm:1
+#, c-format
+msgid "Niger"
+msgstr "Niger"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Naznačite da li koristite CDRW medij"
+msgid "No printer"
+msgstr "Nema pisača"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "Naznačite da li koristite CDRW medij"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "alert configuration"
+msgstr "postava upozoravanja"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Izaberite prostor na CDu"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NetWare Printer Options"
+msgstr "Postavke NetWare pisača"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
+msgid "%s BootSplash (%s) preview"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "Koristi CD/DVDROM za pohranu"
+msgid "General"
+msgstr "Općenito"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
+msgid "Printing system: "
+msgstr "Ispisni sustav:"
 
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Remember this password"
-msgstr "Zapamti ovu lozinku"
+msgid "Add a user"
+msgstr "Dodaj korisnika"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Please enter your password"
-msgstr "Upišite svoju lozinku"
+msgid "Network configuration (%d adapters)"
+msgstr "Mrežne postavke (%d adaptera)"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
 #, c-format
-msgid "Please enter your login"
-msgstr "Upišite svoje korisničko ime"
+msgid "Mandatory package %s is missing"
+msgstr "Nužni paket %s nedostaje"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr "Upišite mapu na ovom hostu u koju ćete staviti pohranu."
+#: ../../lang.pm:1
+#, c-format
+msgid "Philippines"
+msgstr "Filipini"
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
 #, c-format
-msgid "Please enter the host name or IP."
-msgstr "Upišite ime hosta ili IP."
+msgid "Ok"
+msgstr "U redu"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
+msgid "Print Queue Name"
+msgstr "Ime reda pisača"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"  Transfer  \n"
-"Now"
-msgstr "Prebaci"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Da li želite koristiti aboot?"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Bjeloruska"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
 msgstr ""
+"PDQ podržava samo lokalne pisače, udaljene LPD pisače i socket/TCPpisače.\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Use Expect for SSH"
-msgstr ""
+msgid "Move files to the new partition"
+msgstr "Premijesti datoteku na novu particiju"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Net Method:"
+msgid ""
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "Koristi FTP vezu za pohranu"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Users"
-msgstr "Korisnici"
+msgid "Restore From Catalog"
+msgstr "Vrati particijsku tabelu"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Windows (FAT32)"
-msgstr "Windowse (FAT32)"
+msgid "Pitcairn"
+msgstr "Pitcairn"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Koristi inkrementalnu pohranu (ne zamjenjuje stare pohrane)"
+msgid "IDE"
+msgstr "IDE"
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
-#, c-format
-msgid "Remove Selected"
-msgstr "Ukloni izabrano"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group :"
+msgstr "Radna grupa"
 
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Do not include the browser cache"
-msgstr "Izostavi cache preglednika (browsera)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "montiranje particije %s u direktorij %s neuspješno"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Odaberite sve korisnike koje želite uključiti u pohranu."
+msgid "Lilo screen"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../bootloader.pm:1 ../../help.pm:1
 #, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"S ovom opcijom moći ćete povratiti bilo koju inačicu\n"
-"vašeg /etc direktorija."
+msgid "LILO with graphical menu"
+msgstr "LILO sa grafičkim menijem"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Izostavi kritične datoteke (passwd, group, fstab)"
+msgid "Estimating"
+msgstr "Procjenjujem"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Koristi inkrementalno pohranjivanje (ne zamjenjuje staru pohranu)"
+msgid "You can't unselect this package. It is already installed"
+msgstr "Ne možete odznačiti ovaj paket budući da je već instaliran"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Sigurnosno pohranjivanje vaših sustavskih datoteka ( /etc mapa )"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Pisač na SMB/Windows 95/98/NT poslužitelju"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Ove opcije mogu pohraniti i povratiti sve datoteke u vašoj /etc mapi.\n"
+msgid "Go on anyway?"
+msgstr "Da ipak nastavim?"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Tražim dostupne pakete"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
+msgid "Does not appear to be recordable media!"
 msgstr ""
-"\n"
-"Provjerite sve opcije koje trebate.\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Izaberi datoteke ili mape i stisni 'Dodaj'"
+msgid "Specify options"
+msgstr "Odredi postavke"
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "File Selection"
-msgstr "Odabir datoteka"
+msgid "Vanuatu"
+msgstr "Vanuatu"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Can't create catalog!"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr "Greška prilikom čitanja datoteke %s"
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Ime poslužitelja ili IP poslužitelja mora biti naveden!"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
 "\n"
-"Drakbackup activities via tape:\n"
-"\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
 msgstr ""
+"Proizvoljna boot disketa omogućava način podizanja vašeg Linux sustava bez\n"
+"ovisnosti o normalnom bootloader-u. Ovo je korisno ukoliko ne želite "
+"instalirati\n"
+"SILO na vaš sustav, ili je drugi operativni sustav uklonio SILO, ili SILO "
+"ne\n"
+"želi raditi sa vašom konfiguracijom hardware-a. Proizvoljna boot disketa "
+"također može biti korištena sa\n"
+"Mandrake spasonosnom slikom, omogućavajući tako lakše spašavanje od raznih "
+"sustavskih\n"
+"grešaka.\n"
+"\n"
+"Ako želite napraviti boot disketu za vaš sustav, ubacite disketu u prvi\n"
+" pogon i pritisnite \"U redu\"."
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
+msgid "You can't use an encrypted file system for mount point %s"
 msgstr ""
+"Ne možete koristiti enkriptirani datotečni sustav za točku montiranja %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
+msgid "Norfolk Island"
+msgstr "Norfolk Island"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, fuzzy, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) problem sa FTP vezom: nije bilo moguće poslati vaše pohranjene "
-"datotekeFTPom.\n"
+msgid "Theme installation failed!"
+msgstr "Odaberite razred instalacije"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
+#: ../../fsedit.pm:1
+#, c-format
+msgid "Nothing to do"
+msgstr "Nema ništa za uraditi"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Use for loopback"
+msgstr "Koristi za loopback"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Mandrake Bug Report Tool"
 msgstr ""
-"popis datoteka poslan FTPom: %s\n"
-" "
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "Koristi vrpcu za pohranu"
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "use pppoe"
+msgstr "koristi pppoe"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Sigurnosna pohrana datoteka na tvrdom disku..."
+msgid "Moving files to the new partition"
+msgstr "Premiješteam datoteke na novu particiju"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Backup Other files..."
-msgstr "Sigurnosna pohrana drugih datoteka"
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s sa EXPERIMENTALNOM 3D hardware akceleracijom"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1
 #, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Progres sigurnosne pohrane tvrdog diska"
+msgid "Advanced"
+msgstr "Napredno"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Backup User files..."
-msgstr "Sigurnosna pohrana korisničkih datoteka"
+msgid "Transfer"
+msgstr "Prebaci"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Backup system files..."
-msgstr "Sigurnosna pohrana sustavskih datoteka"
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (Švedska)"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "No tape in %s!"
-msgstr ""
+msgid "More Options"
+msgstr "Još opcija"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Permission problem accessing CD."
-msgstr ""
+msgid "Afghanistan"
+msgstr "Afganistan"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "This may take a moment to erase the media."
+msgid "Delete Hard Drive tar files after backup to other media."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
-msgid "Not erasable media!"
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
 msgstr ""
+"cron je standardan UNIX program koji pokreće korisnički definirane programe\n"
+"u periodično zakazana vremena. vixie cron dodaje veliki broj korisnih "
+"funkcija običnom UNIX cron-u, uključujući bolju sigurnost i veću snagu "
+"konfiguracijskih opcija."
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Does not appear to be recordable media!"
-msgstr ""
+msgid "Burundi"
+msgstr "Burundi"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "No CDR/DVDR in drive!"
+msgid "Add Client -->"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "WebDAV transfer failed!"
-msgstr ""
+msgid "Read carefully!"
+msgstr "Pročitajte pažljivo!"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "WebDAV remote site already in sync!"
+msgid "RW"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Total progess"
-msgstr "ukupni progres"
-
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
 #, c-format
 msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
+"Please,\n"
+"type in your tv norm and country"
 msgstr ""
+"Molim, \n"
+"upišite svoj tv standard i zemlju"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "%s not responding"
+msgid "Port"
+msgstr "Port"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "No (experts only)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Can't find %s on %s"
-msgstr "Ne mogu otvoriti %s: %s\n"
+msgid "No kernel selected!"
+msgstr "Nema TV kartice!"
 
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Permission denied transferring %s to %s"
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Pritisnite ENTER za bootiranje izabranog OS, 'e' za promjenu"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Set-GID"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "Bez lozinke"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "The encryption keys do not match"
+msgstr "Enkripcijski ključevi se ne slažu"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "No password prompt on %s at port %s"
-msgstr ""
+msgid "Right \"Windows\" key"
+msgstr "Desna \"Windows\" tipka"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr ""
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "This may take a moment to generate the keys."
+msgid "if set to yes, check empty password in /etc/shadow."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
 msgstr ""
+"Prije nastavka trebate pažljivo pročitati stavke licence. Ona\n"
+"pokriva cijelu Mandrake Linux distribuciju, i ako se ne slažete u svim\n"
+"stavkama sadržanih u njoj, kliknite na \"Odbij\" gumb koji će automatski\n"
+"završiti instalaciju. Za nastavak instalacije, kliknite na\n"
+"\"Prihvati\" gumb."
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
+"Here is a list of the available printing options for the current printer:\n"
 "\n"
 msgstr ""
-"\n"
-"                    DrakBackup Report detalji\n"
-"\n"
+"Ovo je popis dostupnih opcija za ispis za trenutni pisač:\n"
 "\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
+msgid "Resolutions"
+msgstr "Rezolucije"
+
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
 msgid ""
+"drakfirewall configurator\n"
 "\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
 msgstr ""
+"tinyfirewall podešavanje\n"
 "\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Ovo podešava osobni vatrozid za ovo Mandrake Linux računalo.\n"
+"Za snažno primjenjena vatrozidna rješenja, molimo pogledajte\n"
+"specijaliziranu MandrakeSecurity Firewall distribuciju."
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
 msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
+"Please enter your username, password and domain name to access this host."
 msgstr ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "Ukloni izabrano"
+
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "INFO"
+msgid "Network configuration"
+msgstr "Mrežne postavke"
+
+#: ../../any.pm:1
+#, c-format
+msgid "No sharing"
+msgstr "Nema dijeljenja"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule down one level"
 msgstr ""
 
+#: ../../common.pm:1
+#, c-format
+msgid "TB"
+msgstr "TB"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using a DVDR device"
+msgstr "Naznačite da li koristite CDRW medij"
+
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
 msgid "FATAL"
 msgstr "FAT"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "WARNING"
+msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
+"\n"
+"The network address is %s using a netmask of %s.\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Cron not available yet as non-root"
-msgstr ""
+msgid "Delete"
+msgstr "Obriši"
 
-#: ../../standalone/drakboot:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalacija %s-a nije uspjela. Prijavljena je slijedeća grešska:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid reboot by the console user."
+msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "No, I don't want autologin"
-msgstr "Ne, ne želim automatsko prijavljivanje"
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
+msgstr ""
+"Mogu podesiti da se X podigne automatski kod podizanja sustava.\n"
+"Da li želite da se X automatski pokreće?"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Da, želim automatsko prijavljivanje sa ovim korisnikom i okružjem"
+msgid "Build the disk"
+msgstr "Napravi disk"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "Odspoji"
+
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Pokreni X-Window sustav pri podizanju"
+msgid "Status:"
+msgstr "Status:"
 
-#: ../../standalone/drakboot:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "System mode"
-msgstr "Sistemski mod"
+msgid "HTTP proxy"
+msgstr "HTTP proxy"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "SSH Server"
+msgstr "NIS Poslužitelj"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "\t-Network by rsync.\n"
+msgstr "\t-Mrežu FTPom.\n"
+
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol"
+msgstr "Europski protokol"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ", printer \"%s\" on server \"%s\""
+msgstr "na Windows poslužitelju \"%s\", dijeli \"%s\""
+
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
 #, c-format
-msgid "Bootsplash"
-msgstr ""
+msgid "Error"
+msgstr "Greška"
 
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Lilo screen"
-msgstr ""
+msgid "allow \"su\""
+msgstr "dozvoli \"su\""
 
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
+msgid "Australia"
+msgstr "Australija"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Themes"
-msgstr "Teme"
+msgid "please wait during ttmkfdir..."
+msgstr "sačekajte tijekom ttmkfdira..."
 
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
 #, fuzzy, c-format
-msgid "Splash selection"
-msgstr "Spremi odabir paketa"
+msgid "Configure only card \"%s\"%s"
+msgstr "Podesi samo karticu \"%s\" (%s)"
 
-#: ../../standalone/drakboot:1
-#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Trenutno koristite %s kao Upravitelj Boot-a.\n"
-"Pritisnite na Podesi za pokretanje čarobnjaka za postavljanje."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Level"
+msgstr "razina"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr ""
+msgid "Change the printing system"
+msgstr "Promijeni ispisni sustav"
 
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
 #, fuzzy, c-format
-msgid "Theme installation failed!"
-msgstr "Odaberite razred instalacije"
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+"Vaš sustav podržava postavu sa više zaslona.\n"
+"Što želite napraviti?"
 
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Notice"
-msgstr "NemaVidea"
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure services"
+msgstr "Podešavanje servisa"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Relaunch 'lilo'"
+msgid "Broadcast Address:"
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
+#, c-format
+msgid "mount failed: "
+msgstr "montiranje nije uspjelo: "
+
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter.  Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr ""
+msgid "Image"
+msgstr "Slika (image)"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr ""
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr "Nisam uspio dodati \"%s\" StarOfficeu/OpenOffice.org/GIMPu."
 
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr "Udaljeno administriranje"
+
+#: ../../modules.pm:1
 #, c-format
 msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
 msgstr ""
+"PCMCIA podrška više ne postoji za 2.2 kernele. Molimo koristite 2.4 kernel."
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Selected All"
+msgstr "Izabrao sve"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
+
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Write %s"
-msgstr "XFree %s"
+msgid "Webmin Service"
+msgstr "Servisi"
 
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr ""
+msgid "device"
+msgstr "uređaj"
 
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Lilo message not found"
-msgstr ""
+msgid "All"
+msgstr "Sve"
 
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Copy %s to %s"
-msgstr "Kopiram %s"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Koji ispisni sustav (spooler) želite koristiti?"
 
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Backup %s to %s.old"
-msgstr ""
+msgid "Greece"
+msgstr "Grčka"
 
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Create new theme"
-msgstr "Stvori novu particiju"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "An error occurred"
+msgstr "Pojavila se greška"
 
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
 msgid ""
-"Display theme\n"
-"under console"
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
 msgstr ""
+"Ovaj paket treba nadograditi\n"
+"Da li ste sigurni da ga želite odznačiti?"
 
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Install themes"
-msgstr "Instaliraj sustav"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Armenska (pisaća mašina)"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub mod"
+msgid "manual"
+msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot mod"
+msgid "Printer manufacturer, model, driver"
+msgstr "Proizvođač pisača, model, pokretački program"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Ne postoji medij za uređaj %s.\n"
+"Molimo ubacite jedan."
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "/File/_Quit"
-msgstr "/Datoteka/_Izlaz"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Direktorij %s već sadrži neke podatke\n"
+"(%s)"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "/_File"
-msgstr "/_Datoteka"
+msgid "Printer on NetWare server"
+msgstr "Pisač na NetWare poslužitelju"
 
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Boot Style Configuration"
-msgstr "Postava Stila Podizanja"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "No browser available! Please install one"
-msgstr "Screenshotovi će biti raspoloživi poslije instalaciju u %s"
+msgid "Give the ram size in MB"
+msgstr "Upišite veličinu RAM u Mb"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr ""
+msgid "Real name"
+msgstr "Puno ime"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "Post deinstalacija"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "done"
+msgstr "Gotov"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Not installed"
-msgstr "Post deinstalacija"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please uncheck or remove it on next time."
+msgstr "Molimo poništite odabir ili ga uklonite idući put"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Standalone Tools"
-msgstr "Konzolni Alati"
+#: ../../security/level.pm:1
+#, c-format
+msgid "Higher"
+msgstr "Viši"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Report"
-msgstr "port"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Izaberite particije koje želite formatirati"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
 #, c-format
 msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
 "\n"
 "\n"
-"To submit a bug report, click on the button report.\n"
-"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
 "\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 msgstr ""
+"TV kartica nije prepoznata na vašem računalu. Provjerite da li je Linux-"
+"podržana Video/TV kartica ispravno uključena.\n"
+"\n"
+"\n"
+"Možete posjetiti našu bazu hardvera na:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Release: "
-msgstr "Molim pričekajte"
+msgid "Can't find %s on %s"
+msgstr "Ne mogu otvoriti %s: %s\n"
 
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Kernel:"
+msgid "Japanese 106 keys"
+msgstr "Japanska (106 tipaka)"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "This will take a few minutes."
 msgstr ""
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "Odabir paketa"
+#: ../../lang.pm:1
+#, c-format
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Application:"
-msgstr "Provjera autentičnosti"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use scanners on remote computers"
+msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "Čarobnjak mrežnih postavki"
+msgid "Delete selected rule"
+msgstr "Ukloni izabrano"
 
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Userdrake"
-msgstr "Printerdrake"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Pisač na udaljenom CUPS poslužitelju"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "Windows Migration tool"
-msgstr ""
+msgid "Insert a floppy in %s"
+msgstr "Umetnite disketu u pogon %s"
 
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Urpmi"
-msgstr ""
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Software Manager"
-msgstr "Ime sharea"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Remote Control"
-msgstr "Udaljeni pisač"
+msgid "Maldives"
+msgstr "Maldivi"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Msec"
-msgstr "Miš"
+#: ../../any.pm:1
+#, c-format
+msgid "compact"
+msgstr "zbijeno"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Menudrake"
-msgstr "MandrakeStore"
+#: ../../common.pm:1
+#, c-format
+msgid "1 minute"
+msgstr "1 minuta"
 
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Mandrake Online"
-msgstr "MandrakConsulting"
+msgid "on channel %d id %d\n"
+msgstr "na sabirnici %d id %d\n"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "HardDrake"
-msgstr "na tvrdi disk"
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", multi-function device"
+msgstr ", multi-funkcionalan uređaj"
 
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Synchronization tool"
+msgid "Laos"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
 #, fuzzy, c-format
-msgid "First Time Wizard"
-msgstr "Dobro došli u čarobnjak za prvi put"
-
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Mandrake Control Center"
-msgstr "Mandrake Kontrolni Centar"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"Nema FAT particije za mjenjanje veličine ili za korištenje loopback-a (ili "
+"nema dovoljno prostora)"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Mandrake Bug Report Tool"
+msgid "Up"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Parameters"
-msgstr "Parametri"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Firewall"
+msgstr "Vatrozid/Ruter"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Internet Connection Configuration"
-msgstr "Postava Internet veze"
+msgid "Area:"
+msgstr "Područje :"
 
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "DHCP Client"
-msgstr "DHCP klijent"
+msgid "(E)IDE/ATA controllers"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Ethernet Card"
-msgstr "Ethernet kartica"
+msgid "Printer Server"
+msgstr "Ispisni poslužitelj"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Gateway"
-msgstr "Gateway"
+msgid "Disconnection from the Internet complete."
+msgstr ""
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Connection type: "
-msgstr "Tip veze: "
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Custom configuration"
+msgstr "postava upozoravanja"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Profile: "
-msgstr "Profil: "
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Internet connection configuration"
-msgstr "Postava Internet veze"
+msgid "Saint Pierre and Miquelon"
+msgstr "Saint Pierre and Miquelon"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
 msgstr ""
-"Nemate niti jednu internet vezu.\n"
-"Napravite jednu klikanjem na 'Podesi'"
+"\n"
+"Problemi sa povratom pohrane:\n"
+"\n"
+"Tijekom pohrane, drakbackup će provjeriti\n"
+"sve vaše datoteke u pohrani prije nego ih povrati.\n"
+"Prije povrata, Drakbackup će ukloniti vašu izvornu\n"
+"mapu, i izgubit ćete sve podatke. Važno je biti\n"
+"oprezan i ne mijenjati podatke u pohrani ručno.\n"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "saving Bootsplash theme..."
 msgstr ""
-"Ovo sučelje još nije podešeno.\n"
-"Pokrenite čarobnjak za postavu u glavnom prozoru"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "activate now"
-msgstr "Aktiviraj sada"
+msgid "Portugal"
+msgstr "Portugal"
 
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "deactivate now"
-msgstr "Deaktiviraj sada"
+msgid "Do you have another one?"
+msgstr "Da li imate još koji?"
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "DHCP client"
-msgstr "DHCP klijent"
+msgid ", printing to %s"
+msgstr ", ispis na %s"
 
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "Upišite ime hosta ili IP."
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Started on boot"
-msgstr "Pokrenuto pri podizanju"
+msgid "Toggle to normal mode"
+msgstr "Prebaci u normalni mod"
 
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Boot Protocol"
-msgstr "Boot protokol"
+msgid "Generic"
+msgstr "Generički"
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
+msgid "Cylinder %d to %d\n"
+msgstr "Cilindar %d do %d\n"
 
 #: ../../standalone/drakconnect:1
 #, c-format
-msgid "LAN Configuration"
-msgstr "LAN postavke"
+msgid "New profile..."
+msgstr "Novi profil..."
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "LAN configuration"
-msgstr "LAN postavke"
+msgid "Which disk do you want to move it to?"
+msgstr "Na koji disk se želite premjestiti?"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+msgid "Display logo on Console"
 msgstr ""
-"Nemate niti jedan konfigurirani međusklop.\n"
-"Konfigurirajte ga prvo klikanjem na 'Postavljanje'"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Connect..."
-msgstr "Poveži..."
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Windows Domain"
+msgstr "Dobavi Windows fontove"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Disconnect..."
-msgstr "Odspoji..."
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Interface %s (on network %s)"
+msgstr "Međusklop %s (koristi modul %s)"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Not connected"
-msgstr "Nije povezan"
+msgid "INFO"
+msgstr ""
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Connected"
-msgstr "Povezan"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Wallis and Futuna"
+msgstr "Wallis and Futuna Islands"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+msgid "Need to create /etc/dhcpd.conf first!"
 msgstr ""
-"Upozorenje, otkrivena je još jedna Internet veza, koja možda koristivašu "
-"mrežu"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Interface:"
-msgstr "Međusklop:"
+msgid "Is FPU present"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Gateway:"
-msgstr "Gateway:"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
 #, c-format
-msgid "Apply"
-msgstr "Primjeni"
+msgid ""
+"No additional information\n"
+"about this service, sorry."
+msgstr ""
+"Nema dodatnih informacija\n"
+"o ovom servisu, žalim."
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Ovdje stisnite za pokretanje čarobnjaka ->"
+msgid "Build Single NIC -->"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Wizard..."
-msgstr "Čarobnjak..."
+msgid "Is this correct?"
+msgstr "Da li je ovo ispravno?"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Status:"
-msgstr "Status:"
+msgid "Marshall Islands"
+msgstr "Marshall Islands"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Type:"
-msgstr "Tip:"
+msgid "Windows (FAT32)"
+msgstr "Windowse (FAT32)"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Internet access"
-msgstr "Internet pristup"
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Root password"
+msgstr "Bez lozinke"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Hostname: "
-msgstr "Ime računala: "
+msgid "Build All Kernels -->"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Configure Local Area Network..."
-msgstr "Podesi lokalnu mrežu..."
+msgid "if set to yes, report unowned files."
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "State"
-msgstr "Stanje"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Swap particija ne postoji\n"
+"\n"
+"Da ipak nastavim?"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Driver"
-msgstr "Upravljački program"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Server IP missing!"
+msgstr "Ime NCP poslužitelja nedostaje!"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Protocol"
-msgstr "Protokol"
+msgid "Suriname"
+msgstr "Suriname"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Interface"
-msgstr "Međusklop"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Enable ACPI"
+msgstr "Omogući CD podizanje?"
 
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
 #, c-format
-msgid "Configure Internet Access..."
-msgstr "Podešavanje Internet Pristupa..."
+msgid "Graphical Environment"
+msgstr "Grafičko Okružje"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Wait please"
-msgstr "Molim sačekajte"
+msgid "Gibraltar"
+msgstr "Gibraltar"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
+msgid "on Tape Device"
 msgstr ""
-"Ime profila kojeg treba stvoriti (novi profil se stvara kao kopija "
-"trenutnog):"
 
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Do nothing"
+msgstr "ali ne odgovara"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete Client"
+msgstr "DHCP klijent"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "New profile..."
-msgstr "Novi profil..."
+msgid "Filesystem type: "
+msgstr "Vrsta datotečnog sustava:"
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Profile to delete:"
-msgstr "Profil za obrisati:"
+msgid "Starting network..."
+msgstr "Pokrećem mrežu ..."
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vietnam"
+msgstr "Viet Nam"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Fields description"
+msgstr "Opis"
+
+#: ../../share/advertising/10-security.pl:1
 #, c-format
-msgid "Del profile..."
-msgstr "Obriši profil..."
+msgid "Optimize your security by using Mandrake Linux"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Mrežne postavke (%d adaptera)"
+msgid "Help"
+msgstr "Pomoć"
 
-#: ../../standalone/drakedm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
+msgid "Your personal phone number"
+msgstr "Vaš osobni telefonski broj"
 
-#: ../../standalone/drakedm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Choosing a display manager"
-msgstr ""
+msgid "Which size do you want to keep for Windows on"
+msgstr "Koliku veličinu želite zadržati za windowse"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
 msgstr ""
-"Ne mogu ispravno zatvoriti mkbootdisk: \n"
-" %s \n"
-" %s"
+"Probna stranica(e) poslana je na pisač.\n"
+"Ponekad je potrebno par sekundi prije nego pisač počne s ispisom.\n"
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Unable to fork: %s"
-msgstr "Ne mogu napraviti fork: %s"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username required"
+msgstr "Korisničko ime"
 
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
 #, fuzzy, c-format
 msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
 msgstr ""
-"Ne postoji medij za uređaj %s.\n"
-"Molimo ubacite jedan."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Uvjerite se da je medij\tprisutan za uređaj %s"
+"Obično, DrakX izabere pravu tipkovnicu za vas (ovisno o jeziku koji ste "
+"odabrali)\n"
+"i nećete ni vidjeti ovaj korak. Međutim, možda nemate tipkovnicu koja točno\n"
+"odgovara vašem jeziku: npr. ako ste iz Švicarske a govorite engleski, možda\n"
+"svejedno želite švicarsku tipkovnicu. Ili ako govorite engleski, a živite u\n"
+"Quebecu, možda ćete se naći u sličnoj situaciji. U oba slučaja, morate se "
+"vratiti\n"
+"na ovaj instalacijski korak i odabrati odgovarajuću tipkovnicu iz popisa.\n"
+"\n"
+"Pristisnite \"Dodatno\" da biste dobili potpun popis podržanih tipkovnica."
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Build the disk"
-msgstr "Napravi disk"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "Postavke SMB (Windows 9x/NT) pisača"
 
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Output"
-msgstr "Ispis"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
 
 #: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Remove a module"
-msgstr "Ukloni modul"
+msgid "mkinitrd optional arguments"
+msgstr "mkinitrd opcionalni argumenti"
 
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
-msgid "Add a module"
-msgstr "Dodaj modul"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "omit scsi modules"
-msgstr "izostavi scsi module"
+msgid "Protocol for the rest of the world"
+msgstr "Protokol za ostatak svijeta"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "if needed"
-msgstr "ako je potrebno"
+msgid "Print test pages"
+msgstr "Ispiši probne stranice"
 
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "omit raid modules"
-msgstr "izostavi raid module"
+msgid "64 MB or more"
+msgstr "64 MB ili više"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "force"
-msgstr "prisili"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Izaberite probne stranice koje želite ispisati.\n"
+"Primjetite: foto probna stranica se može vrlo dugo ispisivati, a na "
+"laserskimpisačima sa malo memorije i uopće se ne ispisati. U većini "
+"slučajeva jedovoljno ispisati standardnu probnu stranicu."
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd opcionalni argumenti"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Please select the device where your %s is attached"
+msgstr ""
+"Scannerdrake nije uspio prepoznati vaš %s skener.\n"
+"Izaberite uređaj gdje je skener uključen"
 
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Expert Area"
-msgstr "Ekspertno područje"
+msgid "Not formatted\n"
+msgstr "Nije formatiran\n"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "kernel version"
-msgstr "kernel inačica"
+msgid "Periodic Checks"
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "default"
-msgstr "uobičajeno"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "PXE Server Configuration"
+msgstr "Napredne postavke"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "General"
-msgstr "Općenito"
+msgid "Backup the system files before:"
+msgstr "Pohrani sustavske datoteke prije:"
 
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "boot disk creation"
-msgstr "pravljenje boot diskete"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Ovo je standardna sigurnosna razina preporučena za računala koja će biti "
+"korištena za spajanje na Internet kao klijent."
 
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
 #, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "First floppy drive"
+msgstr "Prvi disketni pogon"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Size"
-msgstr "Veličina"
+msgid "/File/_Quit"
+msgstr "/Datoteka/_Izlaz"
 
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Module name"
-msgstr "Ime modula"
+msgid "Dvorak"
+msgstr "Dvorak"
 
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Post Uninstall"
-msgstr "Post deinstalacija"
+msgid "Choose the new size"
+msgstr "Odaberite novu veličinu"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Remove fonts on your system"
-msgstr "Ukloni fontove s vašeg sustava"
+msgid "Media class"
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Initial tests"
-msgstr "Početni testovi"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Post Install"
-msgstr "Post instalacija"
+msgid "Faroe Islands"
+msgstr "Faroe Otočje"
 
 #: ../../standalone/drakfont:1
 #, c-format
-msgid "Install & convert Fonts"
-msgstr "Instaliraj i pretvori fontove"
+msgid "Restart XFS"
+msgstr "Ponovno pokreni XFS"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Copy fonts on your system"
-msgstr "Kopiraj fontove na vaš sustav"
+msgid "Add host/network"
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Remove List"
-msgstr "Popis za uklanjanje"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
 
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Selected All"
-msgstr "Izabrao sve"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter the directory to save to:"
+msgstr "Upišite mapu za snimanje:"
 
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Unselected All"
-msgstr "Odselektiraj sve"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model name"
+msgstr "Ime modula"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "here if no."
-msgstr "ovdje ako niste."
+msgid "Albania"
+msgstr "Albanija"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "click here if you are sure."
-msgstr "stisnite ovdje ako ste sigurni"
+msgid "No CDR/DVDR in drive!"
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Install List"
-msgstr "Instalacijski popis"
+msgid "British Indian Ocean Territory"
+msgstr "Teritorij Britanskog Indijskog Oceana"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Izaberite datoteku ili mapu fontova i stisnite 'Dodaj'"
+msgid "Normal Mode"
+msgstr "Normalni mod"
 
-#: ../../standalone/drakfont:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
 msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Prije no što instalirate bilo kakve fontove, provjerite da li ih imate "
-"pravokoristiti i instalirati na vaš sustav.\n"
+"Please be sure that the cron daemon is included in your services. \n"
 "\n"
-"-Možete instalirati fontove na normalan način. U rijetkim slučajevima, "
-"lažnifontovi će srušiti vaš X poslužitelj."
+"Note that currently all 'net' medias also use the hard drive."
+msgstr "Osigurajte da je cron daemon uključen u vaše servise"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Generic Printers"
-msgstr "Generički pisač"
+msgid "Printer connection type"
+msgstr "Vrsta veze s pisačem"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Nema mrežnog adaptera na vašem sustavu!"
 
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Network %s"
+msgstr "Mreža"
 
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Izaberite aplikacije koje će podržavati fontove :"
+msgid "Option %s out of range!"
+msgstr "Opcija %s je izvan dosega!<"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-"        CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"Ovaj program je besplatni softver; možete ga redistribuirati i/ili "
-"mijenjati\n"
-"pod uvjetima GNU General Public License objavljenje od Free Software\n"
-"Foundationa; ili inačice 2, ili (kako izaberete) neke kasnije inačice.\n"
-"\n"
-"Ovaj program se distribuira u nadi da će biti koristan, ali\n"
-"BEZ IKAKVE GARANCIJE; bez čak i podrazumijevane TRŽIŠNE GARANCIJE\n"
-"ili POGODNOSTI ZA ODREĐENU SVRHU. Pogledajte\n"
-"GNU General Public License za više detalja.\n"
-"\n"
-"Trebali ste dobiti presliku GNU General Public License\n"
-"sa ovim programom; ako ne, pišite na Free Software Foundation,\n"
-"Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
+msgid "Connect %s"
+msgstr "Poveži"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "About"
-msgstr "Prekini"
+msgid "Restarting CUPS..."
+msgstr "Ponovno pokreni XFS"
 
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Font List"
-msgstr "Popis fontova"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Ispis/skeniranje na \"%s\""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "Advanced Options"
-msgstr "Napredne opcije"
+msgid "Duplicate mount point %s"
+msgstr "Dupliciraj mjesto monitranja %s"
 
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Uninstall Fonts"
-msgstr "Odinstaliraj fontove"
+msgid "if set to yes, run chkrootkit checks."
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Get Windows Fonts"
-msgstr "Dobavi Windows fontove"
+msgid "Connection Configuration"
+msgstr "Postava Veze"
 
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Import Fonts"
-msgstr "Uvoz fontova"
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Unknown|Generic"
+msgstr "Generički"
 
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "done"
-msgstr "Gotov"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"Dok instalirate Mandrake Linux, moguće je da su neki paketi već nadograđeni\n"
+"od prvotne inačice. Neki bugovi su možda uklonjeni, i sigurnost poboljšana.\n"
+"Da bi iskoristili prednosti tih nadogradnji, predloženo vam je da ih\n"
+"skinete s Interneta. Izaberite \"Da\" ako ste povezani s Internetom, ili \"Ne"
+"\"\n"
+"ako biste radije instalirali nadograđene pakete kasnije.\n"
+"\n"
+"Odabir \"Da\" prikazuje popis mjesta otkuda se nadogradnje mogu skinuti.\n"
+"Izaberite ono najbliže vama. Tada će se pojaviti stablo za odabir paketa:\n"
+"pregledajte odabir i stisnite \"Instaliraj\" da bi skinuli i instalirali "
+"odabrane\n"
+"pakete, ili \"Odustani\" za prekid."
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "xfs restart"
-msgstr "Ponovno pokreni xfs"
+msgid "Quit"
+msgstr "Završi"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Suppress Fonts Files"
-msgstr "Potisni datoteke fontova"
+msgid "Myanmar"
+msgstr "Myanmar"
 
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Restart XFS"
-msgstr "Ponovno pokreni XFS"
+msgid "Auto allocate"
+msgstr "Raspodijeli automatski"
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Suppress Temporary Files"
-msgstr "Potisni privremene datoteke"
+msgid "Check bad blocks?"
+msgstr "Provjeri za loše blokove?"
 
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "type1inst building"
-msgstr "stvaranje typ1insta"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Other MultiMedia devices"
+msgstr "Ostali mediji"
 
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "pfm fonts conversion"
-msgstr "pretvaranje pfm fontova"
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "No remote machines"
+msgstr "(na ovom računalu)"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "ttf fonts conversion"
-msgstr "pretvaranje ttf fontova"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscript reference"
+msgid "Authentication NIS"
+msgstr "NIS Autentifikacija"
 
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
 #, c-format
-msgid "Fonts conversion"
-msgstr "Pretvaranje fontova"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr ""
+"Postavka ``Ograničene opcije na komandnoj liniji'' nema svrhe ako ne unesete "
+"lozinku"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "True Type install done"
-msgstr "Instalacija True Typea gotova"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Dijeljenje veze prema internetu je trenutno omogućeno"
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "sačekajte tijekom ttmkfdira..."
+msgid "Card IO_0"
+msgstr "IO_0 kartice"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "True Type fonts installation"
-msgstr "Instalacija True Type fontova"
+msgid "United Arab Emirates"
+msgstr "Ujedinjeni Arapski Emirati"
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Fonts copy"
-msgstr "Kopiranje fontova"
+msgid "Card IO_1"
+msgstr "IO_1 kartice"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Search for fonts in installed list"
-msgstr "Potraži fontove u popisu instaliranih"
+msgid "Thailand"
+msgstr "Tajland"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "could not find any font.\n"
-msgstr "nisam mogao naći nijedan font.\n"
+msgid "Routers:"
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Reselect correct fonts"
-msgstr "Ponovno izaberi ispravne fontove"
+msgid "Kazakhstan"
+msgstr "Kazakhstan"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Display all available remote CUPS printers"
+msgstr "Osvježi popis pisača (za prikaz svih dostupnih udaljenih CUPS pisača)"
+
+#: ../../install_steps_newt.pm:1
 #, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "nisam mogao naći nikakve fontove na vašim montiranim particijama"
+msgid "Mandrake Linux Installation %s"
+msgstr "Mandrake Linux instalacija %s"
 
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "no fonts found"
-msgstr "nisu pronađeni fontovi"
+msgid "Thai keyboard"
+msgstr "Tajlandska tipkovnica"
 
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "parse all fonts"
-msgstr "parsiraj sve fontove"
+msgid "Dialup options"
+msgstr "Podesi dialup"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Unselect fonts installed"
-msgstr "Odselektiraj instalirane fontove"
+msgid "Bouvet Island"
+msgstr "Bouvet Otok"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Search installed fonts"
-msgstr "Traži instalirane fontove"
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
 "\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
 msgstr ""
-"Dobro došli u alat za konfiguriranje dijeljenja Internet veze!\n"
-"\n"
-"%s\n"
+"Promjenite vaš Cd-Rom!\n"
 "\n"
-"Kliknite na Postavke ukoliko želite pokreniti čarobnjak za postavljanja."
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Postavke dijeljenja internet veze"
+"Ubacite Cd-Rom označen \"%s\" u vaš pogon i pritisnite U redu kada "
+"završite.\n"
+"Ukoliko ga nemate, pritisnite Odustani kako bi izbjegli instalaciju sa ovog "
+"Cd-Rom-a."
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Dijeljenje veze prema internetu nije bilo konfigurirano."
+msgid "Polish"
+msgstr "Poljska"
 
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Postavljanje je već urađeno, ali je trenutno omogućeno."
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Mandrake Online"
+msgstr "MandrakConsulting"
 
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Postavljanje je već urađeno, ali je trenutno onemogućeno."
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "\t-Network by webdav.\n"
+msgstr "\t-Mrežu FTPom.\n"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
 msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
 msgstr ""
-"Sve je konfigurirano.\n"
-"Sada možete dijeliti vašu internet vezu sa drugim računalima na vašoj "
-"lokalnoj mreži, koristeći automatsku mrežnu konfiguraciju (DHCP)."
-
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problem prilikom instaliranja paketa %s"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Podešavam skriptove, instaliram softver, pokrećem poslužitelje..."
+"Nije pronađen niti jedan mrežni adapter na vašem sustavu. Molimo pokrenite "
+"hardware-ski konfiguracijski alat."
 
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
 #: ../../standalone/drakgw:1
 #, c-format
-msgid "Configuring..."
-msgstr "Podešavam..."
+msgid "Netmask"
+msgstr "Netmaska"
 
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "No hard drives found"
 msgstr ""
-"Potencijalni LAN adresni konflikt je pronađen u trenutnoj konfiguraciji %s!\n"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Lokalna mreža nije završila sa '.0', odustajem."
+"Nije pronađen lokalni pisač!\n"
+"\n"
 
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Re-konfiguriraj sučelje i DHCP poslužitelj"
+msgid "Logitech CC Series"
+msgstr "Logitech CC serije"
 
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
+msgid "2 buttons"
+msgstr "2 gumba"
 
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "The default lease (in seconds)"
-msgstr ""
+msgid "What kind is your ISDN connection?"
+msgstr "Kakav tip ISDN veze koristite ?"
 
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
 #, c-format
-msgid "The DHCP end range"
-msgstr ""
+msgid "Label"
+msgstr "Oznaka"
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "The DHCP start range"
-msgstr ""
+msgid "Save on floppy"
+msgstr "Spremi na disketu"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "Novo ime pisača"
+msgid "Printer auto-detection"
+msgstr "Koristi auto detekciju"
 
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
 #, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "IP (ovog) DHCP poslužitelja"
+msgid "Which of the following is your ISDN card?"
+msgstr "Kakvu ISDN karticu imate?"
 
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
 #, c-format
-msgid "(This) DHCP Server IP"
-msgstr "IP (ovog) DHCP poslužitelja"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS je popularan protokol za dijeljenje datoteka putem TCP/IP mreža.\n"
+"Ovaj servis pruža NFS poslužiteljsku funkcionalnost, koji se konfigurira\n"
+"putem /etc/exports datoteke."
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Msec"
+msgstr "Miš"
+
+#: ../../interactive/stdio.pm:1
 #, c-format
 msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
-"\n"
+"=> Notice, a label changed:\n"
+"%s"
 msgstr ""
+"=> Obavijest, naziv promijenjen:\n"
+"%s"
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "C-Class lokalna mreža"
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Number of capture buffers:"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Vaš izbor? (0/1, uobičajeno '%s') "
+
+#: ../../help.pm:1
 #, fuzzy, c-format
 msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
 "\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
 "\n"
-msgstr ""
-"Mogu zadržati vaše trenutne postavke i pretpostaviti da ste već "
-"postaviliDHCP poslužitelj; u tom slučaju molim provjerite da li sam točno "
-"pročitaoC-Class mrežu koju koristite za vašu lokalnu mrežu; neću je "
-"ponovnokonfigurirati niti dirati postavke vašeg DHCP poslužitelja.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
 "\n"
-"Inače, mogu vam rekonfigurirati vaše sučelje i (re)konfiguriratiDHCP "
-"poslužitelj.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
 "\n"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
 "\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
 msgstr ""
-"Trenutne postavke '%s':\n"
+"Svaka novo definirana particija mora biti\n"
+"formatirana za korištenje (formatiranje znači pravljenje datotečnog "
+"sustava).\n"
 "\n"
-"Mreža: %s\n"
-"IP adresa: %s\n"
-"IP atribut: %s\n"
-"Pokretački program: %s"
+"Trenutno, možete htjeti ponovno formatirati neke već postojeće particije\n"
+"kako bi obrisali\n"
+"podatke koje one posjeduju. Ukoliko želite to napraviti,\n"
+"izaberite particije koje želite formatirati.\n"
+"\n"
+"Primjetite da nije nužno ponovno formatirati sve već postojeće particije.\n"
+"Morate ponovno formatirati particije koje sadrže operativni sustav (poput \n"
+"\"/\",\"/usr\" ili \"/var\") ali ne morate ponovno formatirati particije "
+"koje\n"
+"sadrže podatke koje želite zadržati (tipično \"/home\").\n"
+"\n"
+"Molimo budite pažljivi odabirom particija, poslije formatiranja, svi podaci\n"
+"će biti obrisani i nećete ih moći povratiti.\n"
+"\n"
+"Pritisnite na \"U redu\" kada ste spremni za formatiranje particije.\n"
+"\n"
+"Pritisnite na \"Odustani\" kada želite izabrati druge particije za\n"
+"instalaciju vašeg novog Mandrake Linux operativnog sustava.\n"
+"\n"
+"Pritisnite na \"Napredno\" ako želite izabrati particije koje će biti\n"
+"provjeravane radi loših blokova (bad blocks)."
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Francuska"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Češka (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
 #, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "Pokaži trenutne postavke sučelja"
+msgid "Hardware probing in progress"
+msgstr "detektiran na portu %s"
 
 #: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "Ispisni poslužitelj"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
 #, c-format
-msgid "Show current interface configuration"
-msgstr "Pokaži trenutne postavke sučelja"
+msgid "Summary"
+msgstr "Sumarno"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No (experts only)"
+msgid ""
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
 msgstr ""
+" (paralelni portovi:/dev/lp0, /dev/lp1, ...,odgovara LPT1:, LPT2:, ..., prvi "
+"USB pisač: /dev/usb/lp0, drugi USB pisač: /dev/usb/lp1, ...)."
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Automatic reconfiguration"
-msgstr "Automatska rekonfiguracija"
+msgid "Next"
+msgstr "Slijedeće"
 
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
+#, c-format
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Ne možete instalirati bootloader na %s particiju\n"
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "CHAP"
+msgstr "CHAP"
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp)"
+
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
 "\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
 "\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
 msgstr ""
-"Upozorenje, mrežni adapter (%s) je već podešen.\n"
 "\n"
-"Želite li automatsku re-konfiguraciju?\n"
+"Dobrodošli.\n"
 "\n"
-"Možete je podesiti i ručno, ali trebate znati što radite."
+"Parametri automatske instalacije su dostupni u odjeljku na lijevoj strani"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Network interface already configured"
-msgstr "Mrežno sučelje već podešeno"
+msgid "Puerto Rico"
+msgstr "Puerto Riko"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
 msgstr ""
-"Molimo odaberite koji mrežni adapter će biti povezan na vašu lokalnu mrežu."
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Lituanska \"number row\" QWERTY"
+
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
 "\n"
-"%s\n"
 "\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
 msgstr ""
-"Postoji samo jedan konfigurirani mrežni adapter na vašem sustavu:\n"
-"\n"
-"%s\n"
-"\n"
-"Postaviti ću lokalnu mrežu (LAN) sa tim adapterom."
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Network interface"
-msgstr "Mrežni međusklop"
+msgid "Anguilla"
+msgstr "Anguilla"
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "NIS domena"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
 msgstr ""
-"Nije pronađen niti jedan mrežni adapter na vašem sustavu. Molimo pokrenite "
-"hardware-ski konfiguracijski alat."
+"\n"
+"- Korisničke datoteke:\n"
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No network adapter on your system!"
-msgstr "Nema mrežnog adaptera na vašem sustavu!"
+msgid "Antarctica"
+msgstr "Antartika"
 
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Interface %s"
-msgstr "Međusklop %s"
+msgid "Mount options"
+msgstr "Opcije montiranja"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Međusklop %s (koristi modul %s)"
+msgid "Jamaica"
+msgstr "Jamajka"
 
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
 #, fuzzy, c-format
-msgid "Net Device"
-msgstr "Ispisni poslužitelj"
-
-#: ../../standalone/drakgw:1
-#, c-format
 msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
 msgstr ""
+"Dodjeljuje raw uređaje (kao što su hard disk\n"
+"particije), za uporabu u aplikacijama kao što su Oracle"
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
+#: ../../security/help.pm:1
+#, c-format
 msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
 "\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection.  If\n"
+"\\fIalert\\fP is true, also reports to syslog."
 msgstr ""
-"Vaše računalo može biti konfigurirano da dijeli vlastitu Internet vezu.\n"
-"Sa tom značajkom, druga računala na vašoj lokalnoj mreži mogu koristiti "
-"Internet vezu ovog računala.\n"
-"\n"
-"Upozorenje: trebati ćete primjenjeni Mrežni Uređaj za postavljanje lokalne "
-"mreže (LAN)."
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Internet Connection Sharing"
-msgstr "Dijeljenje Internet Veze"
+msgid "Please wait, preparing installation..."
+msgstr "Molimo pričekajte, Pripremam instalaciju"
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Dijeljenje veze prema internetu je trenutno omogućeno."
+msgid "Czech (QWERTZ)"
+msgstr "Češka (QWERTZ)"
 
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Enabling servers..."
-msgstr "Omogućujem poslužitelje..."
+msgid "Track network card id (useful for laptops)"
+msgstr "Prati id mrežne kartice (korisno za laptope)"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "dismiss"
-msgstr "odustani"
+msgid "The port number should be an integer!"
+msgstr "Broj porta bi trebao biti cjelobrojni broj!"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "You must choose an image file first!"
+msgstr "Morate izabrati/upisati pisač/uređaj!"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "reconfigure"
-msgstr "ponovno postavi"
+msgid "Restore from Hard Disk."
+msgstr "Povrati s tvrdog diska"
 
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "enable"
-msgstr "omogući"
+msgid "Add to LVM"
+msgstr "Dodaj LVM-u"
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Postavljanje dijeljenja veze prema Internetu je već napravljeno.\n"
-"Trenutno je onemogućeno.\n"
-"\n"
-"Što želite napraviti?"
+#: ../../network/network.pm:1
+#, c-format
+msgid "DNS server"
+msgstr "DNS poslužitelj"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Dijeljenje veze prema Internetu je trenutno onemogućeno"
+msgid "Trinidad and Tobago"
+msgstr "Trinidad i Tobago"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Dijeljenje veze prema Internetu je trenutno onemogućeno."
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD i LPRng ne podržavaju IPP pisače.\n"
 
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Disabling servers..."
-msgstr "Onemogućujem poslužitelje..."
+msgid "simple"
+msgstr "jednostavno"
 
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "disable"
-msgstr "onemogući"
+msgid "Clear all"
+msgstr "Očisti sve"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Postavljanje dijeljenja veze prema internetu je već napravljeno.\n"
-"Trenutno je omogućeno.\n"
-"\n"
-"Što želite napraviti?"
+msgid "No test pages"
+msgstr "Bez testnih stranica"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Dijeljenje veze prema internetu je trenutno omogućeno"
+msgid "Adapter %s: %s"
+msgstr "Adapter %s: %s"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr ""
+msgid "Falkland Islands (Malvinas)"
+msgstr "Falkland Otočje (Malvinas)"
 
-#: ../../standalone/drakhelp:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
+msgid "Unknown model"
+msgstr "Nepoznati model"
 
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Path"
+msgid "if set to yes, check files/directories writable by everybody."
 msgstr ""
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "group :"
-msgstr "Radna grupa"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "user :"
-msgstr "Korisnik"
-
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Path selection"
-msgstr "Spremi odabir paketa"
+msgid "authentication"
+msgstr "Provjera autentičnosti"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr ""
+msgid "Backup Now"
+msgstr "Pohrani sada"
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Use group id for execution"
-msgstr "Koristi auto detekciju"
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "/_File"
+msgstr "/_Datoteka"
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Use owner id for execution"
-msgstr "Koristi auto detekciju"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Uklanjam pisač iz StarOfficea/OpenOffice.org/GIMPa"
 
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
 msgstr ""
+"Pokreće paketno filtriranje za Linux kernel 2.2 serije, za postavljanje\n"
+"vatrozida za zaštitu vašeg računala od mrežnih napada."
 
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Set-GID"
-msgstr ""
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamil (TSCII)"
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Set-UID"
-msgstr ""
+msgid "Mayotte"
+msgstr "Mayotte"
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "sticky-bit"
-msgstr ""
+msgid "Creating auto install floppy..."
+msgstr "Pravim auto instalacijsku disketu"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Property"
-msgstr "Port"
+msgid "Searching for scanners ..."
+msgstr "Lokalni pisač"
 
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
 #, fuzzy, c-format
-msgid "Permissions"
-msgstr "Inačica: %s\n"
+msgid "Partitioning"
+msgstr "Ispisujem"
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Current user"
-msgstr "Prihvati korisnika"
+msgid "Russia"
+msgstr "Ruska"
 
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "browse"
-msgstr ""
+msgid "ethernet card(s) detected"
+msgstr "ethernet kartica(e) pronađene"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Edit current rule"
+msgid "Syslog"
+msgstr "Syslog"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Can't create catalog!"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "edit"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
 msgstr ""
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "Ukloni izabrano"
+#: ../../fsedit.pm:1
+#, c-format
+msgid "Not enough free space for auto-allocating"
+msgstr "Nema dovoljno slobodnog prostora za auto-alokaciju"
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "delete"
-msgstr "Obriši"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Set root password"
+msgstr "Podešavanje root lozinke"
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Add a new rule at the end"
-msgstr "Dodaj novi pisač"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "add a rule"
-msgstr "Dodaj modul"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"Nakon mijenjanja veličine particije %s svi podaci na ovoj particiji biti će "
+"izgubljeni"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Move selected rule down one level"
+msgid "Internet connection configuration"
+msgstr "Postava Internet veze"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Scanning for TV channels"
+msgstr "Tražim TV kanale"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Kernel:"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Down"
-msgstr "Gotov"
+msgid "/_About..."
+msgstr "/Pomoć/_O programu"
 
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Move selected rule up one level"
-msgstr "Odselektiraj sve"
+msgid "Bengali"
+msgstr "omogući"
 
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Up"
-msgstr ""
+msgid "Preference: "
+msgstr "Postavke:"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "select perm file to see/edit"
-msgstr ""
+msgid "Wizard..."
+msgstr "Čarobnjak..."
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
 #, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
+msgid "Services: %d activated for %d registered"
+msgstr "Servisi: %d aktiviran za %d registriran"
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "permissions"
-msgstr "particija %s"
+#: ../../any.pm:1
+#, c-format
+msgid "Create a bootdisk"
+msgstr "Napravi boot disketu"
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "group"
+#: ../../lang.pm:1
+#, c-format
+msgid "Solomon Islands"
+msgstr "Solomon Otoci"
+
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "(module %s)"
+msgstr "(modul %s)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Workgroup"
 msgstr "Radna grupa"
 
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "user"
-msgstr "Korisnik"
+msgid "Printer host name or IP"
+msgstr "Ime računala od pisača"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "path"
+msgid "Host Path or Module"
 msgstr ""
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Pravim auto instalacijsku disketu"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "Ime pisača može sadržavati samo slova, brojeve i podvlaku"
 
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
+msgid "Show current interface configuration"
+msgstr "Pokaži trenutne postavke sučelja"
 
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
 #, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
+msgid "Development"
+msgstr "Razvoj"
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "No image found"
-msgstr ""
-"Nije pronađen lokalni pisač!\n"
-"\n"
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Done"
+msgstr "Gotov"
 
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
 #, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "Xpmac (instalacijski zaslonski upravljački program)"
+msgid "Web Server"
+msgstr "Poslužitelj"
 
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
+msgid "\tDo not include System Files\n"
+msgstr "\tIzostavi sustavske datoteke\n"
 
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The DHCP end ip"
-msgstr ""
+msgid "Chile"
+msgstr "Čile"
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The DHCP start ip"
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
 msgstr ""
+"Pokretački programi za Inkjet pisače od Lexmarka podržavaju samo lokalne "
+"pisače,ne pisače na udaljenim računalima ili kutijama ispisnog poslužitelja. "
+"Spojitevaš pisač na lokalni port ili ga namjestite na računalu u kojeg je "
+"uključen."
 
-#: ../../standalone/drakpxe:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
 msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
 "\n"
+"Do not use \"scannerdrake\" for this device!"
 msgstr ""
+"Vaš HP multi-funkcijski uređaj je automatski namješten za skeniranje. "
+"Sadamožete skenirati sa \"scanimage\" (\"scanimage -d hp:%s\" da odredite "
+"kojiskener, ako ih imate više) iz komandne linije ili s grafičkim sučeljima"
+"\"xscanimage\" ili \"xsane\". Ako koristite GIMP, također možete "
+"skeniratibiranjem odgovarajuće stavke u \"File\"/\"Acquire\" izborniku. "
+"Probajte\"man scanimage\" i \"man sane-hp\" u komandnoj liniji za više "
+"informacija.\n"
+"\n"
+"Ne koristite \"scannerdrake\" za ovaj uređaj!"
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Međusklop %s (koristi modul %s)"
+#: ../../any.pm:1
+#, c-format
+msgid "(already added %s)"
+msgstr "(već postoji %s)"
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Molimo izaberite sa kojim mrežnim adapterom se želite priključiti na Internet"
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", using command %s"
+msgstr ", korištenjem komande %s"
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Alt and Shift keys simultaneously"
+msgstr "Alt i Shift tipku istodobno"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
 msgstr ""
-"Vaše računalo može biti konfigurirano da dijeli vlastitu Internet vezu.\n"
-"Sa tom značajkom, druga računala na vašoj lokalnoj mreži mogu koristiti "
-"Internet vezu ovog računala.\n"
-"\n"
-"Upozorenje: trebati ćete primjenjeni Mrežni Uređaj za postavljanje lokalne "
-"mreže (LAN)."
 
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "Napredne postavke"
+msgid "Add/Del Users"
+msgstr "Dodaj korisnika"
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "Napredne postavke"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Host/network IP address missing."
+msgstr ""
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security options..."
-msgstr "Molimo pričekajte, Pripremam instalaciju"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "weekly"
+msgstr "svaki tjedan"
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security level..."
-msgstr "Podešavam sigurnosni nivo"
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Settings"
+msgstr "Postavke"
 
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Periodic Checks"
+msgid "The entered host/network IP is not correct.\n"
 msgstr ""
 
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "System Options"
-msgstr "Još opcija"
+msgid "Here is the full list of available countries"
+msgstr "Ovdje je cijeli popis raspoloživih tipkovnica"
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Network Options"
-msgstr "Još opcija"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "Alternativna testna stranica (A4)"
 
-#: ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
 msgstr ""
+"Ako imate sve dolje navedene CDove kliknite U redu.\n"
+"Ako nemate niti jedan od navedenih CD kliknite Odustani.\n"
+"Ako imate samo neke od dolje navedenih CDa odznačite one koje nemate i "
+"kliknite U redu."
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "Udaljeno administriranje"
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Wait please"
+msgstr "Molim sačekajte"
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "Sigurnosna razina"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "PAP"
+msgstr "PAP"
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Level:"
-msgstr "Sigurnosna razina"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup user files"
+msgstr "Pohrani korisničke datoteke"
 
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
 #, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " (Uobičajeno)"
+msgid "New"
+msgstr "novi"
 
-#: ../../standalone/draksec:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-"               to the Internet as a client.\n"
-"\n"
-"High:       There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
 "\n"
-"Higher:    The security is now high enough to use the system as a server "
-"which can accept\n"
-"              connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-"           should choose a lower level.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
 "\n"
-"Paranoid:  This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-"                features are at their maximum\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
 "\n"
-"Security Administrator:\n"
-"               If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-"            email)"
-msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
 "\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
 "\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
 "\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program.  Just type \"sndconfig\" in a console."
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
 msgstr ""
-
-#: ../../standalone/draksound:1
-#, fuzzy, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
+"Ovo je najvažnija odluka za sigurnost vašeg GNU/Linux sustava: morate "
+"unijeti\n"
+"\"root\" lozinku. \"root\" je sustavski administrator i jedini koji je "
+"ovlašten\n"
+"da vrši nadogradnje, dodaje korisnike, mijenja cjelokupne postavke sustava, "
+"itd.\n"
+"Ukratko, \"root\" može raditi sve! Stoga morate izabrati lozinku koju je "
+"teško\n"
+"pogoditi, DrakX će vam reći da li je prelagana. Kao što vidite, možete "
+"odabrati\n"
+"da ne unesete lozinku, ali jako vam savjetujemo da to ne činite, barem zbog\n"
+"jednog razloga: nemojte mislite da, zbog tog što ste pokrenuli GNU/Linux, su "
+"vaši\n"
+"ostali operacijski sustavi sigurni od grešaka. Pošto \"root\" može "
+"premostiti\n"
+"sva ograničenja i nenamjerno obrisati sve podatke na particijama nemarnim "
+"pristupanjem,\n"
+"važno je da bude teško postati \"root\".\n"
 "\n"
+"Lozinka bi trebala biti kombinacija alfanumeričkih znakova i barem 8 znakova "
+"duga.\n"
+"Nikad ne zapisujte \"root\" lozinku, prelako dovodite sustav u opasnost.\n"
 "\n"
-"You can visit our hardware database at:\n"
+"Ipak, nemojte izabrati predugu ili presloženu lozinku, jer ćete je morati "
+"lako\n"
+"zapamtiti.\n"
 "\n"
+"Lozinka se neće pojaviti na ekranu kako je budete upisivali. Zato je morate\n"
+"upisati dvaput da bi smanjili mogućnost greške pri upisu. Ako ipak ponovite "
+"istu\n"
+"grešku dva puta, morat ćete koristiti ovu \"netočnu\" lozinku kada se prvi "
+"put\n"
+"budete prijavljivali.\n"
 "\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"TV kartica nije prepoznata na vašem računalu. Provjerite da li je Linux-"
-"podržana Video/TV kartica ispravno uključena.\n"
+"U stručnjak modu, bit ćete zapitani da li ćete se spajati na "
+"autentifikacijski\n"
+"poslužitelj, poput NISa ili LDAPa.\n"
 "\n"
+"Ako vaša mreža koristi LDAP (ili NIS) protokole za autentifikaciju, "
+"izaberite\n"
+"\"LDAP\" (ili \"NIS\") kao autentifikaciju. Ako ne znate kako, pitajte\n"
+"administratora mreže.\n"
 "\n"
-"Možete posjetiti našu bazu hardvera na:\n"
+"Ako vaše računalo nije povezano sa administriranom mrežom, morat ćete "
+"izabrati\n"
+"\"Lokalne datoteke\" za autentifikaciju."
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
 "\n"
+"If you do not know what to choose, stay with the default option."
+msgstr ""
+"Sada treba odabrati željenu razinu sigurnosti računala. Opće pravilo jest "
+"da\n"
+"što je više računalo izloženo i podaci vrijedniji, to bi veća razina "
+"sigurnosti\n"
+"trebala biti. Međutim, veća razina sigurnosti utječe na jednostavnost "
+"korištenja.\n"
+"Pogledajte u \"msec\" poglavlje u ``Reference Manual'' za bolje obješnjenje\n"
+"značenja tih razina.\n"
 "\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Ako ne znate što biste odabrali, ostavite podrazumijevanu opciju."
 
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Load from floppy"
+msgstr "Učitaj sa diskete"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "No Sound Card detected!"
-msgstr "Nema TV kartice!"
+msgid "The following printer was auto-detected. "
+msgstr "Slijedeći paketi će biti uklonjeni"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "%s BootSplash (%s) preview"
+msgid "Boot Floppy"
 msgstr ""
 
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Generating preview ..."
-msgstr "Otkrivanje uređaja ..."
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "You must choose an image file first!"
-msgstr "Morate izabrati/upisati pisač/uređaj!"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Norwegian"
+msgstr "Norveška"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "Izabir modela pisača"
+msgid "Searching for new scanners ..."
+msgstr "Lokalni pisač"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
+msgid "Apache World Wide Web Server"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "saving Bootsplash theme..."
+msgid "stepping of the cpu (sub model (generation) number)"
 msgstr ""
 
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image file"
-msgstr "Izaberite datoteku"
-
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "choose image"
-msgstr "Izaberite datoteku"
+msgid "select path to restore (instead of /)"
+msgstr "izaberi putanju za povrat (umjesto / )"
 
 #: ../../standalone/draksplash:1
 #, fuzzy, c-format
 msgid "Configure bootsplash picture"
 msgstr "Podešavanje servisa"
 
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Make kernel message quiet by default"
-msgstr ""
+msgid "China"
+msgstr "Kina"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "Izaberite port na kojem se nalazi pisač."
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Display logo on Console"
-msgstr ""
+msgid "Georgia"
+msgstr "Georgia"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
 #, fuzzy, c-format
-msgid "Choose color"
-msgstr "Odaberite monitor"
+msgid "Reading data of installed printers..."
+msgstr "Lokalni pisač"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Save theme"
-msgstr "Instaliraj sustav"
+msgid " Erase Now "
+msgstr "Prebaci"
 
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Preview"
-msgstr "uređaj"
+#: ../../fsedit.pm:1
+#, c-format
+msgid "server"
+msgstr "poslužitelj"
 
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "the color of the progress bar"
-msgstr ""
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Umetnite FAT formatiranu disketu u pogon %s"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "the height of the progress bar"
+msgid "yes means the processor has an arithmetic coprocessor"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "the width of the progress bar"
-msgstr ""
+msgid "Please Wait... Applying the configuration"
+msgstr "Molimo pričekajte... Primjenjujem konfiguraciju"
 
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Dobro dosli u GRUB izbornik operativnih sustava!"
 
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
+msgid "Grub"
+msgstr "Grub"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "SCSI controllers"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr "na LPD poslužitelju \"%s\", pisač \"%s\""
+
+#: ../../standalone/drakedm:1
 #, c-format
-msgid "text box height"
+msgid "Choosing a display manager"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Zeroconf Host name"
+msgstr "Ime računala"
+
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "text width"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP adresa treba biti oblika 1.2.3.4"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Ecuador"
+msgstr "Ekvador"
+
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Add an item"
+msgstr "Dodaj stavku"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The printers on this machine are available to other computers"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+msgid "I can't find needed image file `%s'."
+msgstr "Ne mogu naći potrebnu datoteku sa slikom '%s'."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No sound card detected. Try \"harddrake\" after installation"
 msgstr ""
+"Nije pronađena zvučna kartica. Probajte \"harddrake\" poslije instalacije"
 
-#: ../../standalone/draksplash:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
 msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1
 #, c-format
-msgid "Browse"
+msgid "Shell"
+msgstr "Ljuska"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "PCI"
+msgstr "PCI"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Sao Tome and Principe"
+msgstr "Sao Tome and Principe"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Can't login using username %s (bad password?)"
 msgstr ""
 
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Theme name"
-msgstr "Ime sharea"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Azerbaidjani (latin)"
+msgstr "Azerbejdžanska (latinica)"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "final resolution"
-msgstr "Rezolucija"
+msgid "Package not installed"
+msgstr "Post deinstalacija"
 
-#: ../../standalone/draksplash:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, fuzzy, c-format
-msgid "first step creation"
-msgstr "pravljenje boot diskete"
+msgid "Become a MandrakeExpert"
+msgstr "MandrakeExpert"
 
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "American Samoa"
+msgstr "Američki Samoa"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Protocol"
+msgstr "Protokol"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Copy fonts on your system"
+msgstr "Kopiraj fontove na vaš sustav"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Harddrake help"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Bogomips"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Prebaci postavke pisača"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
 "\n"
-"\n"
-"You can visit our hardware database at:\n"
+"                    DrakBackup Report Details\n"
 "\n"
 "\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
 msgstr ""
-"TV kartica nije prepoznata na vašem računalu. Provjerite da li je Linux-"
-"podržana Video/TV kartica ispravno uključena.\n"
 "\n"
-"\n"
-"Možete posjetiti našu bazu hardvera na:\n"
+"                    DrakBackup Report detalji\n"
 "\n"
 "\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No TV Card detected!"
-msgstr "Nema TV kartice!"
+msgid "Restore all backups"
+msgstr "Povrati sve pohrane"
 
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
+msgid "if set to yes, check open ports."
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Have a nice day!"
+msgid "This may take a moment to erase the media."
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "XawTV isn't installed!"
-msgstr ""
-
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Pojavila se greška kod instalacije paketa:"
+msgid "You can't select/unselect this package"
+msgstr "Ne možete označiti/odznačiti ovaj paket"
 
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "Scanning for TV channels"
-msgstr "Tražim TV kanale"
+msgid "Warning"
+msgstr "Upozorenje"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "Pretraživanje TV kanala u tijeku ..."
+msgid ""
+"\n"
+"- Other Files:\n"
+msgstr ""
+"\n"
+"- Druge datoteke:\n"
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Area:"
-msgstr "Područje :"
+msgid "Remote host name"
+msgstr "Udaljeno ime računala"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "TV norm:"
-msgstr "TV standard :"
+msgid "deactivate now"
+msgstr "Deaktiviraj sada"
 
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Molim, \n"
-"upišite svoj tv standard i zemlju"
+msgid "access to X programs"
+msgstr "pristup X programima"
 
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "Australian Optus cable TV"
-msgstr ""
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Computing the size of the Windows partition"
+msgstr "Iskoristi slobodan prostor na Windows particiji"
 
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #: ../../standalone/drakxtv:1
 #, c-format
-msgid "Newzealand"
-msgstr "Novi Zeland"
+msgid "Italy"
+msgstr "Italija"
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "France [SECAM]"
-msgstr "Francuska [SECAM]"
+msgid "Name of printer"
+msgstr "Ime pisača"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "East Europe"
-msgstr "Istočna Europa"
+msgid "disable"
+msgstr "onemogući"
 
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
 #, c-format
-msgid "West Europe"
-msgstr "Zapadna Europa"
+msgid "error unmounting %s: %s"
+msgstr "greška kod demontiranja %s: %s"
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "China (broadcast)"
-msgstr "Kina (bcast)"
+msgid "Do it!"
+msgstr "Napravi!"
 
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Japan (cable)"
-msgstr "Japan (kabl)"
+msgid "Cayman Islands"
+msgstr "Kajmansko otočje"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Japan (broadcast)"
+msgid "%s not responding"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (kabl)"
+msgid "Select model manually"
+msgstr "Ručno izaberi model"
 
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "USA (cable-hrc)"
-msgstr "SAD (kabl-hrc)"
+msgid "Format"
+msgstr "Formatiraj"
 
-#: ../../standalone/drakxtv:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "USA (cable)"
-msgstr "SAD (kabl)"
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
+msgstr ""
+"Najčešći način da se povežete sa adsl-om je pppoe.\n"
+"Neke veze koriste pptp, a nekoliko koriste dhcp.\n"
+"Ukoliko neznate, izaberite 'koristi pppoe'"
 
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "USA (broadcast)"
-msgstr "SAD (bcast)"
+msgid "Various"
+msgstr "Razno"
 
-#: ../../standalone/drakxtv:1
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Zip"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
 "\n"
 "\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "primary"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
 msgstr ""
+"\n"
+"Označite pisače koje želite prebaciti i stisnite \"Prebaci\"."
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "secondary"
-msgstr "%d sekundi"
+#: ../../printer/data.pm:1
+#, c-format
+msgid "PDQ"
+msgstr "PDQ"
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr ""
+msgid "Albanian"
+msgstr "Albanska"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "Nepoznati model"
+#: ../../lang.pm:1
+#, c-format
+msgid "Lithuania"
+msgstr "Letonija"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "unknown"
-msgstr "Nepoznati model"
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "Zbijeno"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Running \"%s\" ..."
-msgstr "Uklanjam pisač \"%s\" ..."
+msgid "Detected model: %s %s"
+msgstr "Detektirano %s"
 
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
-msgid "Run config tool"
+msgid "MandrakeSoft has selected the best software for you"
 msgstr ""
 
 #: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Configure module"
-msgstr "Podesi miš"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Information"
-msgstr "Prikaži informacije"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "Pokaži info o hardveru"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Harddrake2 version "
-msgstr "Otkrivanje hard diskova"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Detection in progress"
-msgstr "detektiran na portu %s"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Author:"
-msgstr "Auto. ispitaj"
-
-#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
 "This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "About Harddrake"
-msgstr ""
+msgid "Local files"
+msgstr "Lokalne datoteke"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_About..."
-msgstr "/Pomoć/_O programu"
+#: ../../pkgs.pm:1
+#, c-format
+msgid "maybe"
+msgstr "možda"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "/_Report Bug"
-msgstr ""
+msgid "Panama"
+msgstr "Panama"
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
 msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "Odaberite skener"
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Monitor"
+msgstr "Monitor"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
 "\n"
 msgstr ""
+"Sada ćete namjestiti ispis na Windows korisničkom računu sa lozinkom. "
+"Zboggreške u arhitekturi Samba klijent softvera, lozinka je stavljena u "
+"čistomtekstualnom obliku u komandnoj liniji Samba klijenta koji se koristi "
+"zaslanje ispisnog posla Windows poslužitelju. Tako je moguće da si svaki "
+"korisnikna ovom računalu ispiše lozinku na ekranu izdavanje komandi poput "
+"\"psauxwww\".\n"
+"\n"
+"Preporučamo da iskoristite jednu od slijedećih alternativa (u svim "
+"slučajevimamorate provjeriti da samo računala sa vaše lokalne mreže imaju "
+"pristup vašemWindows serveru, npr. putem vatrozida):\n"
+"\n"
+"Koristite korisnički račun bez lozinke na vašem Windows poslužitelju, kao"
+"\"GUEST\" račun ili posebni račun određen samo za ispis. Nemojte "
+"micatizaštitu lozinkom sa osobnog ili administratorskog računa.\n"
+"\n"
+"Namjestite vaš Windows poslužitelj da omogućuje pristup pisaču preko "
+"lpdprotokola. Zatim namjestite ispis s ovog računala sa \"%s\" tipom veze "
+"uPrinterdrakeu.\n"
+"\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Harddrake help"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 tisuća boja (16 bita)"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
 msgstr ""
+"\n"
+"- Snimi na tvrdi disk u putanju: %s\n"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "Opis"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Size: %d KB\n"
+msgstr "Veličina: %d KB\n"
 
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "/_Help"
-msgstr "/_Pomoć"
+msgid "Remove fonts on your system"
+msgstr "Ukloni fontove s vašeg sustava"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Quit"
-msgstr "Završi"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"Upozorenje, mrežni adapter (%s) je već podešen.\n"
+"\n"
+"Želite li automatsku re-konfiguraciju?\n"
+"\n"
+"Možete je podesiti i ručno, ali trebate znati što radite."
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "Koristi auto detekciju"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Graphical interface at startup"
+msgstr "X kod pokretanja sustava"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "Koristi auto detekciju"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter the directory to save:"
+msgstr "Upišite mapu za snimanje:"
 
 #: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "Koristi auto detekciju"
+#, c-format
+msgid "format of floppies supported by the drive"
+msgstr ""
 
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../raid.pm:1
 #, c-format
-msgid "/_Options"
-msgstr "/_Opcije"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Nema dovoljno particija za RAID nivo %d\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "the vendor name of the processor"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
 msgstr ""
+"Navedeni pisači su podešeni. Dvostruko kliknite na pisač da bi mu "
+"promijenilipostavke; da ga odredite za podrazumijevani pisač; ili da bi "
+"pogledaliinformacije o njemu."
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "the vendor name of the device"
-msgstr ""
+msgid "Connected"
+msgstr "Povezan"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Izaberite na kojem serijskom portu je miš priključen."
+msgid "USB printer \\#%s"
+msgstr "USB pisač \\/*%s"
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "Postavka opterećenja"
+msgid "Macedonian"
+msgstr "Makedonska"
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "the number of the processor"
+msgid "Bridges and system controllers"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Processor ID"
-msgstr ""
+msgid "/File/_Save"
+msgstr "/Datoteka/_Snimi"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Mali"
+msgstr "Mali"
+
+#: ../../install_steps_gtk.pm:1
 #, fuzzy, c-format
-msgid "network printer port"
-msgstr ", TCP/IP host \"%s\", port %s"
+msgid "No details"
+msgstr "Detalji"
 
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "the name of the CPU"
-msgstr ""
+msgid "very nice"
+msgstr "vrlo lijepo"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Name"
-msgstr "Ime: "
+msgid "Preview"
+msgstr "uređaj"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "2 gumba"
+msgid "Remote Control"
+msgstr "Udaljeni pisač"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "2 gumba"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please select media for backup..."
+msgstr "Izaberite medij za sigurnosnu pohranu..."
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Official vendor name of the cpu"
-msgstr ""
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 poslužitelj: %s\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Model name"
-msgstr "Ime modula"
+msgid "Allow Thin Clients"
+msgstr "DHCP klijent"
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr ""
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Gruzijska  (\"Ruski\" raspored)"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model"
-msgstr "Miš"
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "/_Options"
+msgstr "/_Opcije"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "hard disk model"
-msgstr "Memorija kartice (DMA)"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Your printer model"
+msgstr "Model vašeg pisača"
 
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
 #, c-format
-msgid "class of hardware device"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
 msgstr ""
+"\n"
+"\n"
+"(UPOZORENJE! Koristite XFS za vašu root particiju,\n"
+"stvaranje boot diskete na disketi kapaciteta 1.44 Mb vjerojatno\n"
+"neće uspjeti, jer XFS treba vrlo velik pokretački program)."
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Media class"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Sub generation of the cpu"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
 #, fuzzy, c-format
-msgid "Level"
-msgstr "razina"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Prebaci postavke pisača"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
+msgid "Save"
+msgstr "Snimi"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Floppy format"
-msgstr "Formatiraj"
+msgid "The %s is unsupported"
+msgstr "Skener %s nije podržan"
 
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
 #, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "Učitava upravljačke programe za vaše usb uređaje."
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Halt bug"
-msgstr ""
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Disk"
+msgstr "Danska"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
+msgid "Enter a printer device URI"
+msgstr "Unesite URI pisača"
 
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
-msgid "F00f bug"
+msgid ""
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
 msgstr ""
+"Uspjeh MandrakeSofta se temelji na principima slobodnog softvera. Vašnovi "
+"operativni sustav je rezultat udruženog rada svjetske Linux zajednice"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+msgid "Israel"
+msgstr "Izrael"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr ""
+msgid "French Guiana"
+msgstr "Francuska Gvineja"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
+msgid "default:LTR"
+msgstr "default:LTR"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Is FPU present"
-msgstr ""
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "add a rule"
+msgstr "Dodaj modul"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "A command line must be entered!"
+msgstr "Ispravan URI mora biti unešen!"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Fdiv bug"
-msgstr ""
+msgid "Select user manually"
+msgstr "Ručno izaberi korisnika"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
+msgid "Transfer printer configuration"
+msgstr "Prebaci postavke pisača"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Flags"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Da li želite pokreniti vašu vezu kod svakog podizanja (boot) sustava ?"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Module"
-msgstr "Miš"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr ""
+msgid "%s (Port %s)"
+msgstr "Port"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "New devfs device"
-msgstr "Gateway uređaj"
+msgid "Use network connection to backup"
+msgstr "Koristi FTP vezu za pohranu"
 
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "old static device name used in dev package"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Old device file"
-msgstr "Odaberite datoteku"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "This field describes the device"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
 msgstr ""
+"Sada treba odrediti koje programe želite instalirati u svoj sustav. Za "
+"Mandrake \n"
+"Linux su dostupne tisuće paketa, i ne morate ih sve znati na pamet.\n"
+"\n"
+"Ako pokrećete standarnu instalaciju sa CD-ROMa, prvo ćete biti upitani da "
+"navedete\n"
+"CDove koje imate (samo u modu za stručnjake). Provjerite imena CDova i "
+"označite\n"
+"kućice koje odgovaraju CDovima koje imate. Pritisnite \"U redu\" kada ste "
+"spremni\n"
+"nastaviti.\n"
+"\n"
+"Paketi su podijeljeni po grupama koje odgovaraju određenoj svrsi. Grupe su \n"
+"podijeljene u četiri sekcije:\n"
+"\n"
+" * \"Radna stanica\": ako ćete koristiti stroj kao radnu stanicu, izaberite\n"
+"jednu ili više odgovarajućih grupa;\n"
+"\n"
+" * \"Razvoj\": ako će se Vaš stroj koristiti za programiranje, izaberite\n"
+"željene grupe;\n"
+"\n"
+" * \"Poslužitelj\": ako je Vaš stroj određen za poslužitelja, moći ćete "
+"odabrati\n"
+"koje od uobičajenih servisa želite instalirati na njega;\n"
+"\n"
+" * \"Grafičko okružje\": naposlijetku, ovdje birate grafičko okružje. Barem "
+"jedno\n"
+"mora biti odabrano ako želite imati grafičku radnu stanicu!\n"
+"\n"
+"Pomicanjem pokazivača miša na ime grupe će se prikazati kratak opis te "
+"grupe. Ako\n"
+"nijedna grupa nije odabrana pri normalnoj instalaciji (za razliku od "
+"nadogradnje),\n"
+"iskočit će dijalog sa predloženim opcijama za minimalnu instalaciju:\n"
+"\n"
+" * \"Sa Xima\": instaliranje što je manje paketa moguće za grafičko "
+"sučelje;\n"
+"\n"
+" * \"Sa osnovnom dokumentacijom\": instalira osnovni sustav sa osnovnim "
+"pomoćnim\n"
+"programima i njihovom dokumentacijom. Ova instalacija je pogodna za "
+"namještanje\n"
+"poslužitelja;\n"
+"\n"
+" * \"Stvarno malena instalacija\": instalirat će strogi minimum potreban da "
+"bi\n"
+"imali Linux sustav koji radi, samo u komandnoj liniji. Ova instalacija je "
+"velika\n"
+"oko 65Mb.\n"
+"\n"
+"Možete provjeriti \"Inividualni odabir paketa\", što je korisno ako ste "
+"upoznati\n"
+"sa ponuđenim paketima ili ako želite imati potpunu kontrolu nad "
+"instaliranim\n"
+"sadržajem.\n"
+"\n"
+"Ako ste pokrenuli instalaciju u \"Nadogradnja\" načinu, možete odselektirati "
+"sve\n"
+"grupe da izbjegnete instaliranje novih paketa. Ovo je korisno za "
+"popravljanje\n"
+"ili osuvremenjivanje postojećeg sustava."
 
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
+msgid "Accept user"
+msgstr "Prihvati korisnika"
 
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Frequency (MHz)"
-msgstr ""
+msgid "Server"
+msgstr "Poslužitelj"
 
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr ""
+msgid "Bad choice, try again\n"
+msgstr "Krivi izbor, pokušajte ponovo\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "Sigurnosna razina"
+msgid "Heard and McDonald Islands"
+msgstr "Heard Island and McDonald Islands"
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
+msgid "No alternative driver"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Cpuid family"
-msgstr ""
+msgid "Toggle to expert mode"
+msgstr "Normalno > Ekspert"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
 #, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
+msgid "(on this machine)"
+msgstr "(na ovom računalu)"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Coma bug"
-msgstr ""
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "IP adresa treba biti oblika 1.2.3.4"
 
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Drive capacity"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Looking at packages already installed..."
+msgstr "Ne možete odznačiti ovaj paket budući da je već instaliran"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Size of the (second level) cpu cache"
+msgid "Use Differential Backups"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Cache size"
-msgstr "chunk veličina"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Driver"
+msgstr "Upravljački program"
 
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
 msgstr ""
+"Linuxconf će ponekada urediti izvršavanje raznih radnji\n"
+"pri samom podizanju kako bi održao sustavsku konfiguraciju."
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Location on the bus"
-msgstr ""
+msgid "Printer on remote lpd server"
+msgstr "Pisač na udaljenom lpd poslužitelju"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
 #, c-format
 msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
 msgstr ""
+"Prije no što instalirate bilo kakve fontove, provjerite da li ih imate "
+"pravokoristiti i instalirati na vaš sustav.\n"
+"\n"
+"-Možete instalirati fontove na normalan način. U rijetkim slučajevima, "
+"lažnifontovi će srušiti vaš X poslužitelj."
 
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Bus identification"
-msgstr "Provjera autentičnosti"
-
-#: ../../standalone/harddrake2:1
-#, c-format
 msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
 msgstr ""
+"Yaboot je bootloader za NewWorld MacIntosh hardware. Može\n"
+"podići GNU/Linux, MacOS, ili MacOSX, ukoliko postoje na vašem računalu.\n"
+"Obično, ti drugi operativni sustavi su ispravno pronađeni i\n"
+"instalirani. Ukoliko to nije slučaj, možete dodati unos ručno na ovom\n"
+"zaslonu. Budite pažljivi da izaberete ispravne parametre.\n"
+"\n"
+"Glavne opcije Yaboota su:\n"
+"\n"
+" * Init Poruka: Jednostavna tekst poruka koja se prikaže prije pitanja o\n"
+"podizanju.\n"
+"\n"
+" * Boot Uređaj: Označava gdje želite staviti informaciju potrebnu za \n"
+"podizanje GNU/Linux-a. Općenito, bootstrap particiju namještate prije, \n"
+"da sadrži ovu informaciju.\n"
+"\n"
+" * Otvorena Firmware Pauza: Za razliku od LILO-a, postoje dvije raspoložive\n"
+"pauze sa yaboot-om.  Prva pauza se mjeru sekundama i na tom mjestu možete \n"
+"birati izmežu CD-a, OF boot-a, MacOS-a ili Linux-a.\n"
+"\n"
+" * Kernel Boot Čekanje: Ovo čekanje je slično LILO boot čekanju. Poslije \n"
+"izabiranja Linux-a, imati ćete pauzu od 0.1 sekunde prije nego "
+"podrazumijevani\n"
+"kernel opis bude odabran.\n"
+"\n"
+" * Omogući CD Boot?: Postavljanje ove opcije će vam dozvoliti da možete\n"
+"izabrati 'C' za CD na prvom pitanju pri podizanju.\n"
+"\n"
+" * Omogući OF Boot?: Postavljanje ove opcije će vam dozvoliti da možete\n"
+"izabrati 'N' za Open Firmware prvi prvom pitanju pri podizanju.\n"
+"\n"
+" * Podrazumijevani OS: Možete izabrati koji OS ćete podići podrazumijevano\n"
+"kada Open Firmware pauza istekne."
 
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Bogomips"
-msgstr ""
+msgid "No mouse"
+msgstr "Nema miša"
 
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "EIDE/SCSI channel"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Channel"
-msgstr "Odustani"
+msgid "Germany"
+msgstr "Njemačka"
 
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
+msgid "Austria"
+msgstr "Austrija"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Bus"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
 msgstr ""
+"Pokrenite \"sndconfig\" poslije instalacije za podešavanje vaše zvučne "
+"kartice"
 
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Alternative drivers"
-msgstr "Alternativna testna stranica (A4)"
+msgid "Collapse Tree"
+msgstr "Sažmi stablo"
 
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Da li želite da BackSpace vrati Delete u konzoli?"
+msgid "Auto Install Configurator"
+msgstr "Postava automatske instalacije"
 
-#: ../../standalone/keyboarddrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Molim izaberite raspored tipkovnice."
+msgid "Configure networking"
+msgstr "Podesi mrežu"
 
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ne mogu pokrenuti živu nadogradnju !!!\n"
+msgid "Where do you want to install the bootloader?"
+msgstr "Gdje želite instalirati bootloader?"
 
-#: ../../standalone/livedrake:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
 msgstr ""
-"Molimo ubacite Instalacijski Cd-Rom u vaš pogon i pritisnite U redu kada ste "
-"završili.\n"
-"Ukoliko ga nemate, pritisnite Odustani kako bi izbjegli živu nadogradnju."
+"Izaberite jezik kojim se želite služiti u instalaciji i sustavu.\n"
+"\n"
+"Pritiskom na \"Napredno\" moći ćete izabrati druge jezike koji će biti "
+"instalirani\n"
+"na vašu radnu stanicu. Odabiranjem drugih jezika instalirat će se "
+"specifične\n"
+"jezične datoteke za sustavsku dokumentaciju i aplikacije. Npr. ako ćete na "
+"svom\n"
+"računalu imati korisnike iz Španjolske, u stablu odaberite Engleski kao "
+"glavni\n"
+"jezik i u sekciji Napredno označite kućicu koja odgovara Španjolskoj.\n"
+"\n"
+"Primjetite da se može instalirati više jezika. Kada odredite eventualne "
+"dodatne\n"
+"lokale, stisnite \"U redu\" za nastavak."
 
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Change Cd-Rom"
-msgstr "Promjeni Cd-Rom"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr ""
 
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Promjena je izvršena, ali da bi imala učinak, morate se odlogirati"
+msgid "DHCP client"
+msgstr "DHCP klijent"
 
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Save as.."
-msgstr "Snimi kao.."
+msgid "Restoring from file %s failed: %s"
+msgstr "Vraćanje iz datoteke %s nije uspjelo: %s"
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Please enter your email address below "
-msgstr "Upišite svoju lozinku"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Miš (serijski, stari C7 tip)"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "alert configuration"
-msgstr "postava upozoravanja"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "New devfs device"
+msgstr "Gateway uređaj"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Primit ćete upozorenje ako je opterećenje veće od ove vrijednosti"
+msgid "ERROR: Cannot spawn %s."
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "load setting"
-msgstr "Postavka opterećenja"
+msgid "Boot Style Configuration"
+msgstr "Postava Stila Podizanja"
 
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "Primit ćete upozorenje ako jedan od izabranih servisa više ne radi"
+msgid "Automatic time synchronization"
+msgstr "Automatska vremenska sinkronizacija (koristeći NTP)"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup files not found at %s."
+msgstr "Pohranjene datoteke su oštećene"
+
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
-msgid "service setting"
-msgstr "postavljanje servisa"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Hvala vam što ste izabrali Mandrake Linux 9.1"
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Xinetd Service"
-msgstr "Ispisni poslužitelj"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (phonetic)"
+msgstr "Armenska (fonetska)"
 
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
 #, fuzzy, c-format
-msgid "Webmin Service"
-msgstr "Servisi"
+msgid "Card model:"
+msgstr "Memorija kartice (DMA)"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "SSH Server"
-msgstr "NIS Poslužitelj"
+msgid "Thin Client"
+msgstr "DHCP klijent"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Samba Server"
+msgid "Start Server"
 msgstr "NIS Poslužitelj"
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix mail poslužitelj, Inn news poslužitelj"
+#: ../../lang.pm:1
+#, c-format
+msgid "Turkmenistan"
+msgstr "Turkmenistan"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Ftp Server"
-msgstr "NIS Poslužitelj"
+msgid "All remote machines"
+msgstr "(na ovom računalu)"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
 #, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "Ime domene"
+msgid "Install themes"
+msgstr "Instaliraj sustav"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Apache World Wide Web Server"
+msgid ""
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
 msgstr ""
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+#: ../../help.pm:1
+#, c-format
+msgid "Espanol"
 msgstr ""
-"Dobrodošli u pomoćni program za postavljanje pošte/SMSa.\n"
-"\n"
-"Ovdje ćete moći namjestiti sustav upozoravanja.\n"
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "Postava upozorenja na poštu/SMS"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Preparing installation"
+msgstr "Pripremam instalaciju"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Edit selected host/network"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Mail alert"
-msgstr "Upozorenje na poštu/SMS"
+msgid "Add User -->"
+msgstr "Dodaj korisnika"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Molim pričekajte, parsiram datoteku: %s"
+msgid "Nauru"
+msgstr "Nauru"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Content of the file"
-msgstr "Sadržaj datoteke"
+msgid "True Type fonts installation"
+msgstr "Instalacija True Type fontova"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Calendar"
-msgstr "Kalendar"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Choose file"
-msgstr "Izaberite datoteku"
+msgid "LAN configuration"
+msgstr "LAN postavke"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "but not matching"
-msgstr "ali ne odgovara"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "hard disk model"
+msgstr "Memorija kartice (DMA)"
 
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "matching"
-msgstr "odgovara"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Ne možete koristiti LVM logički prostor za mjesto montiranja %s"
 
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Settings"
-msgstr "Postavke"
+msgid "Get Windows Fonts"
+msgstr "Dobavi Windows fontove"
 
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "A tool to monitor your logs"
-msgstr "Alat za nadziranje logova"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
 
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "search"
-msgstr "potraga"
+msgid "Iranian"
+msgstr "Iranska"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "Objašnjenja Mandrake alata"
+msgid "Croatia"
+msgstr "Hrvatska"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Syslog"
-msgstr "Syslog"
+msgid "Gateway:"
+msgstr "Gateway:"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Messages"
-msgstr "Poruke"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Add server"
+msgstr "Dodaj korisnika"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "User"
-msgstr "Korisnik"
+msgid "Remote printer name"
+msgstr "Ime udaljenog pisača"
 
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
 #, c-format
-msgid "/Help/_About..."
-msgstr "/Pomoć/_O programu"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together  in order to highly reduce hacking risks."
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "/Options/Test"
-msgstr "/Opcije/Proba"
+msgid "Device: "
+msgstr "Uređaj:"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
 #, c-format
-msgid "/File/-"
-msgstr "/Datoteka/-"
+msgid "Printerdrake"
+msgstr "Printerdrake"
 
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "/File/Save _As"
-msgstr "/Datoteka/Snimi_kao"
+msgid "License agreement"
+msgstr "Licencni dogovor"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "System Options"
+msgstr "Još opcija"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "/File/_Save"
-msgstr "/Datoteka/_Snimi"
+msgid "Please enter the directory where backups are stored"
+msgstr "Upišite mapu u koju ste pohranili podatke"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Please choose the desired security level"
+msgstr "Izaberite sigurnosni nivo"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "/File/_Open"
-msgstr "/Datoteka/_Otvori"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr ""
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", USB printer"
+msgstr ", USB pisač \\/*%s"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "/File/_New"
-msgstr "/Datoteka/_Nova"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Izaberite aplikacije koje će podržavati fontove :"
 
-#: ../../standalone/logdrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Show only for the selected day"
-msgstr "Pokaži samo izabrani dan"
+msgid "Configure X"
+msgstr "Podesi X"
 
-#: ../../standalone/mousedrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Emulate third button?"
-msgstr "Emuliranje treće tipke?"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Turska (tradicionalni \"F\" model)"
 
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Please choose your mouse type."
-msgstr "Molim izaberite koju vrstu miša koristite."
+msgid "Congratulations!"
+msgstr "Čestitke!"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Connect %s"
-msgstr "Poveži"
+msgid "Use owner id for execution"
+msgstr "Koristi auto detekciju"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "Odspoji"
+msgid "Down"
+msgstr "Gotov"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Raw printer (No driver)"
+msgstr "Raw printer (Bez upravljačkog programa)"
+
+#: ../../network/modem.pm:1
 #, fuzzy, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Upozorenje, otkrivena je još jedna Internet veza, koja možda koristivašu "
-"mrežu"
+msgid "Install rpm"
+msgstr "Instaliraj"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "received"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
 msgstr ""
+"Da bi ispisali datoteku iz komandne linije (terminalski prozor) koristiteili "
+"komandu \"%s <datoteka>\" ili grafički alat za ispis: \"xpp <datoteka>\"ili "
+"\"kprinter <datoteka>\". Grafički alati vam omogućuju da lako izaberetepisač "
+"i podesite opcije.\n"
 
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "transmitted"
-msgstr ""
+msgid "Time remaining "
+msgstr "Preostalo vrijeme"
 
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "received: "
-msgstr ""
+msgid "UK keyboard"
+msgstr "UK tipkovnica"
 
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "sent: "
-msgstr ""
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Local measure"
-msgstr "Lokalne datoteke"
+msgid "Unmount"
+msgstr "Demontiraj"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "average"
-msgstr ""
+msgid "Uninstall Fonts"
+msgstr "Odinstaliraj fontove"
 
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
 #, fuzzy, c-format
-msgid "Color configuration"
-msgstr "postava upozoravanja"
+msgid "Microsoft Explorer"
+msgstr "Microsoft IntelliMouse"
 
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
+msgid "German (no dead keys)"
+msgstr "Njemačka (bez mrtvih tipaka)"
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "Brzina"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transferring %s..."
+msgstr "Prebacujem %s ..."
 
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Disconnection from the Internet complete."
-msgstr ""
+msgid "32 thousand colors (15 bits)"
+msgstr "32 tisuća boja (15 bita)"
 
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
 #, c-format
-msgid "Disconnection from the Internet failed."
-msgstr ""
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr "Možete izvesti koristeći NFS ili Sambu. Koji od njih želite"
 
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "Spoji se na Internet"
+msgid "Reboot"
+msgstr "Root"
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Spoji se na Internet"
+#: ../../lang.pm:1
+#, c-format
+msgid "Gambia"
+msgstr "Gambija"
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Testiram vašu vezu..."
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Mandrake Control Center"
+msgstr "Mandrake Kontrolni Centar"
 
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Logs"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
 msgstr ""
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "Tip veze: "
-
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
 #, c-format
-msgid "Receiving Speed:"
+msgid ""
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
 msgstr ""
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "Šaljem datoteke..."
-
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Statistics"
+msgid "\t-Tape \n"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Profile "
-msgstr "Profil: "
+#: ../../standalone/drakhelp:1
+#, c-format
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "Mrežne postavke"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Remember this password"
+msgstr "Zapamti ovu lozinku"
 
-#: ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Lokalni pisač"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Dijeljenje veze prema internetu je trenutno omogućeno."
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Name/IP address of host:"
-msgstr ""
+msgid "\t-Network by SSH.\n"
+msgstr "\t-Mrežu SSHom.\n"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "Odaberite skener"
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Use the free space on the Windows partition"
+msgstr "Iskoristi slobodan prostor na Windows particiji"
 
 #: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Upišite ime hosta ili IP."
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s nađen na %s, podesi?"
 
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Lokalni pisač"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "(na ovom računalu)"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 upravljački program: %s\n"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "Ukloni izabrano"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "detektirano %s"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"                      DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+"                      DrakBackup Report \n"
+"\n"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Add host"
-msgstr "Dodaj korisnika"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the packages you want to install"
+msgstr "Odaberite pakete koje želite instalirati"
 
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr ""
+msgid "Papua New Guinea"
+msgstr "Papua Nova Gvineja"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "Koristi slobodan prostor"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Serbian (cyrillic)"
+msgstr "Srpska (čirilica)"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "(na ovom računalu)"
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Make kernel message quiet by default"
+msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
 msgstr ""
+"Da li želite postaviti ovaj pisač (\"%s\")\n"
+"kao podrazumijevani pisač?"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Use the scanners on hosts: "
+msgid "The DHCP end range"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "Use scanners on remote computers"
-msgstr ""
+msgid "Creating bootdisk..."
+msgstr "Stvaram boot disketu"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Dijeljenje datoteka"
+msgid "Wait please, testing your connection..."
+msgstr "Testiram vašu vezu..."
 
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
+msgid "Bringing down the network"
+msgstr "Onemogućujem mrežu"
 
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
+msgid "Login ID"
+msgstr "Prijavno ime"
 
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
 msgstr ""
+"NFS je popularan protokol za dijeljenje datoteka putem TCP/IP mreža.\n"
+"Ovaj servis pruža funkcionalnost NFS datotečnog zaključavanja."
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr ""
+msgid "DHCP Client"
+msgstr "DHCP klijent"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Lokalni pisač"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "dismiss"
+msgstr "odustani"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Lokalni pisač"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing/Scanning on \"%s\""
+msgstr "Ispis/skeniranje na \"%s\""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Dijeljenje datoteka"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "omit raid modules"
+msgstr "izostavi raid module"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Add a scanner manually"
-msgstr "Ručno izaberi korisnika"
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"lpd je daemon za ispis koji je potreban od lpr-a kako bi radio ispravno.\n"
+"On je pojednostavljeno poslužitelj koji šalje ispisne poslove pisaču(ima)."
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Lokalni pisač"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet Connection Configuration"
+msgstr "Postava Internet veze"
 
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "There are no scanners found which are available on your system.\n"
+msgid "comma separated numbers"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
+#: ../../standalone/harddrake2:1
+#, c-format
 msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "Kopiraj fontove na vaš sustav"
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
+msgstr ""
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Move selected rule up one level"
+msgstr "Odselektiraj sve"
 
 #: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
 msgid ""
-"The following scanners\n"
+"The following scanner\n"
 "\n"
 "%s\n"
-"are available on your system.\n"
+"is available on your system.\n"
 msgstr "Kopiraj fontove na vaš sustav"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"vaš %s skener je podešen.\n"
-"Možete sada skenirati dokumente korištenjem ''XSanea'' izMultimedija/Grafika "
-"u aplikacijskom izborniku."
-
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "choose device"
-msgstr "Izaberite uređaj"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Please select the device where your %s is attached"
-msgstr ""
-"Scannerdrake nije uspio prepoznati vaš %s skener.\n"
-"Izaberite uređaj gdje je skener uključen"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "Lokalni pisač"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Da li stvarno želite ukloniti pisač \"%s\"?"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "Koristi auto detekciju"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "I can't find any room for installing"
+msgstr "Ne mogu pronaći bilo kakvo mjesto za instaliranje"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "Default printer"
+msgstr "Podrazumijevani pisač"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
+#: ../../network/netconnect.pm:1
+#, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
 msgstr ""
-"Ovaj %s skener mora podesiti printerdrake.\n"
-"Možete pokrenuti printerdrake iz Mandrake kontrolnog centra uHardver "
-"odjeljku."
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "The %s is unsupported"
-msgstr "Skener %s nije podržan"
+"Odabrali ste više načina za spajanje na Internet.\n"
+"Molimo izaberite koji želite koristiti.\n"
+"\n"
 
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr ""
+msgid "Modify RAID"
+msgstr "Promijeni RAID"
 
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
+msgid ""
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
 msgstr ""
+"Pronašao sam ISDN PCI karticu međutim ne znam kojeg je tipa. Molim izaberite "
+"vašu PCI karticu na slijedećem ekranu."
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "Port"
+#: ../../any.pm:1
+#, c-format
+msgid "Add user"
+msgstr "Dodaj korisnika"
 
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ", "
-msgstr ""
+msgid "RAID-disks %s\n"
+msgstr "RAID-diskovi %s\n"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "Detektirano %s"
+#: ../../lang.pm:1
+#, c-format
+msgid "Liberia"
+msgstr "Liberija"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid " ("
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Odaberite skener"
+#: ../../steps.pm:1
+#, c-format
+msgid "Choose your keyboard"
+msgstr "Odaberite tipkovnicu"
 
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
+msgid "Format partitions"
+msgstr "Formatiraj particije"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s nađen na %s, podesi?"
+msgid "Automatic correction of CUPS configuration"
+msgstr "Automatska CUPS konfiguracija"
 
-#: ../../standalone/service_harddrake:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "detektiran na portu %s"
+msgid "Running \"%s\" ..."
+msgstr "Uklanjam pisač \"%s\" ..."
 
-#: ../../standalone/service_harddrake:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Some devices were added:\n"
+msgid "enable radio support"
 msgstr ""
 
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing to hosts: "
+msgstr "Dijeljenje datoteka"
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
-msgstr ""
-"Uspjeh MandrakeSofta se temelji na principima slobodnog softvera. Vašnovi "
-"operativni sustav je rezultat udruženog rada svjetske Linux zajednice"
+msgid "Loopback file name: %s"
+msgstr "Ime loopback datoteke: %s"
 
-#: ../../share/advertising/01-thanks.pl:1
-#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Dobrodošli u Open Source svijet"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Izaberite port na kojem se nalazi pisač."
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Hvala vam što ste izabrali Mandrake Linux 9.1"
+msgid "Do not transfer printers"
+msgstr "Ne prebacuj pisače"
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
-"Upoznajte Open Source zajednicu i postanite članom. Učite, podučavajte "
-"ipomažite drugima učestvovanjem u diskusijama u mnogim forumima koje "
-"ćetepronaći na \"Community\" web stranicama"
+msgid "Delay before booting the default image"
+msgstr "Odgoda prije bootiranja uobičajenog imagea"
 
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
 msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
-msgstr ""
-
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+"     DUPONT Sebastien (original version)\n"
+"     CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+"    -  pfm2afm:   \n"
+"\t by Ken Borgendale:\n"
+"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
+"    -  type1inst:\n"
+"\t by James Macnicol: \n"
+"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+"    -  ttf2pt1:   \n"
+"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
+"             Convert ttf font files to afm and pfb fonts\n"
 msgstr ""
+"Ovaj program je besplatni softver; možete ga redistribuirati i/ili "
+"mijenjati\n"
+"pod uvjetima GNU General Public License objavljenje od Free Software\n"
+"Foundationa; ili inačice 2, ili (kako izaberete) neke kasnije inačice.\n"
+"\n"
+"Ovaj program se distribuira u nadi da će biti koristan, ali\n"
+"BEZ IKAKVE GARANCIJE; bez čak i podrazumijevane TRŽIŠNE GARANCIJE\n"
+"ili POGODNOSTI ZA ODREĐENU SVRHU. Pogledajte\n"
+"GNU General Public License za više detalja.\n"
+"\n"
+"Trebali ste dobiti presliku GNU General Public License\n"
+"sa ovim programom; ako ne, pišite na Free Software Foundation,\n"
+"Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 8.2 vam omogućuje da potpuno ostvarite "
-"multimedijalnipotencijal vašeg računala! Koristite najnovije programe za "
-"reprodukcijuglazbe i zvučnih datoteka, uređujte i organizirajte slike i "
-"fotografije,gledajte TV i video zapise, i još mnogo toga"
+msgid "Please check for multisession CD"
+msgstr "Naznačite da li koristite CDRW medij"
 
-#: ../../share/advertising/03-software.pl:1
-#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user"
+msgstr "Korisnik"
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Use Hard Disk to backup"
+msgstr "Koristi tvrdi disk za pohranu"
 
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
+msgid "Configure"
+msgstr "Podesi"
 
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Prebaci postavke pisača"
+msgid "Scannerdrake"
+msgstr "Odaberite skener"
 
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
 msgstr ""
+"Upozorenje, otkrivena je još jedna Internet veza, koja možda koristivašu "
+"mrežu"
 
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "A customizable environment"
-msgstr ""
+msgid "Backup Users"
+msgstr "Pohrani korisnike"
 
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
 #, c-format
 msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
 msgstr ""
+"Molim unesite ime računala.\n"
+"Ime računala treba biti puno ime računala,\n"
+"primjerice mojeracunalo.odjel.domena.hr.\n"
+"Također unesite IP adresu gateway računala ako gateway postoji"
 
-#: ../../share/advertising/06-development.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr ""
+msgid "Select Printer Spooler"
+msgstr "Odaberite spooler pisača"
 
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
 #, fuzzy, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"Učinite od svog računala moćni poslužitelj sa samo nekoliko pritisaka na "
-"mišu:Web poslužitelj, email, vatrozid, router, datotečni i ispisni "
-"poslužitelj, ..."
+msgid "Create new theme"
+msgstr "Stvori novu particiju"
 
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Turn your computer into a reliable server"
-msgstr ""
+msgid "Mandrake Tools Explanation"
+msgstr "Objašnjenja Mandrake alata"
 
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
 #, fuzzy, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"Potpun raspon Linux rješenja, kao i posebne ponude proizvoda i 'goodiesa', "
-"sudostupni online preko naše e-trgovine"
-
-#: ../../share/advertising/08-store.pl:1
-#, c-format
-msgid "The official MandrakeSoft Store"
+msgid "No image found"
 msgstr ""
+"Nije pronađen lokalni pisač!\n"
+"\n"
 
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../install_steps.pm:1
 #, c-format
 msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
 msgstr ""
+"Neki važni paketi nisu se instalirali pravilno.\n"
+"Ili je vaš cdrom pogon ili cd medij u defektu.\n"
+"Provjerite cdrom na instaliranom računalu koristeći \"rpm -qpl Mandrake/RPMS/"
+"*.rpm\"\n"
 
-#: ../../share/advertising/09-mdksecure.pl:1
-#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "Detektirano %s"
 
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
 #, c-format
 msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together  in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
 msgstr ""
 
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Optimize your security by using Mandrake Linux"
+msgid "if set to yes, run the daily security checks."
 msgstr ""
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
 #, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr ""
+msgid "Azerbaijan"
+msgstr "Azerbedžan"
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+msgid "No tape in %s!"
 msgstr ""
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak (USA)"
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
 msgstr ""
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
+msgid "How is the printer connected?"
+msgstr "Kako je pisač povezan?"
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
+#, c-format
+msgid "Security level"
+msgstr "Sigurnosna razina"
+
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Become a MandrakeExpert"
-msgstr "MandrakeExpert"
+msgid "final resolution"
+msgstr "Rezolucija"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
 #, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
+msgid "Services"
+msgstr "Servisi"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
-
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, fuzzy, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert"
+msgid "4 MB"
+msgstr "4 MB"
 
 #: ../../share/compssUsers:999
 msgid "Office Workstation"
@@ -18586,10 +18624,6 @@ msgstr ""
 "(kspread, gnumeric), pdf preglednici, itd"
 
 #: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Radna stanica"
-
-#: ../../share/compssUsers:999
 msgid "Game station"
 msgstr "Igračka radna stanica"
 
@@ -18661,10 +18695,6 @@ msgstr ""
 "K Radno Okružje, osnovno grafičko okružje sa kolekcijom pripadajućih alata"
 
 #: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafičko Okružje"
-
-#: ../../share/compssUsers:999
 msgid "Gnome Workstation"
 msgstr "Gnome radna stanica"
 
@@ -18685,10 +18715,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
 msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itd"
 
 #: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Razvoj"
-
-#: ../../share/compssUsers:999
 msgid "C and C++ development libraries, programs and include files"
 msgstr "C i C++ razvojne biblioteke, programi i uključujuće datoteke"
 
@@ -18760,40 +18786,97 @@ msgstr "NFS poslužitelj, SMB poslužitelj, Proxy poslužitelj, SSH poslužitelj"
 
 #: ../../share/compssUsers:999
 #, fuzzy
-msgid "Audio station"
-msgstr "Multimedijska stanica"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Pribor alata za čitanje i slanje mail-a i news-a (pine, mutt, tin..) i za "
+"pregled Web-a"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Internet veza i postava"
+
+#~ msgid "Configure the connection"
+#~ msgstr "Podesi vezu"
+
+#~ msgid "Disconnect"
+#~ msgstr "Odspoji"
+
+#~ msgid "Connect"
+#~ msgstr "Poveži"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Možete ponovno konfigurirati vašu vezu."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Možete se spojiti na Internet ili ponovno konfigurirati vašu vezu."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Niste trenutno spojeni na Internet."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Možete isključiti ili ponovno konfigurirati vašu vezu."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Trenutno ste spojeni na internet."
+
+#~ msgid "files sending by FTP"
+#~ msgstr "slanje datoteka FTPom"
+
+#~ msgid "Use incremental backup  (do not replace old backups)"
+#~ msgstr "Koristi inkrementalno pohranjivanje (ne zamjenjuje staru pohranu)"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "Zvučni i video svirački/uređivački programi"
+#~ msgid "Write %s"
+#~ msgstr "XFree %s"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Video station"
-msgstr "Igračka radna stanica"
+#~ msgid "Copy %s to %s"
+#~ msgstr "Kopiram %s"
+
+#~ msgid "ttf fonts conversion"
+#~ msgstr "pretvaranje ttf fontova"
+
+#~ msgid "Fonts conversion"
+#~ msgstr "Pretvaranje fontova"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Video playing programs"
-msgstr "Zvučni i video svirački/uređivački programi"
+#~ msgid "Author:"
+#~ msgstr "Auto. ispitaj"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Graphic station"
-msgstr "Igračka radna stanica"
+#~ msgid "Audio station"
+#~ msgstr "Multimedijska stanica"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Graphics programs"
-msgstr "Grafički programi poput Gimp-a"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Zvučni i video svirački/uređivački programi"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Pribor alata za čitanje i slanje mail-a i news-a (pine, mutt, tin..) i za "
-"pregled Web-a"
+#~ msgid "Video station"
+#~ msgstr "Igračka radna stanica"
+
+#, fuzzy
+#~ msgid "Video playing programs"
+#~ msgstr "Zvučni i video svirački/uređivački programi"
+
+#, fuzzy
+#~ msgid "Graphic station"
+#~ msgstr "Igračka radna stanica"
+
+#, fuzzy
+#~ msgid "Graphics programs"
+#~ msgstr "Grafički programi poput Gimp-a"
 
 #, fuzzy
 #~ msgid "Printer sharing"
@@ -18911,12 +18994,10 @@ msgstr ""
 #~ "button\n"
 #~ "to change it if necessary.\n"
 #~ "\n"
-#~ " * \"Keyboard\": check the current keyboard map configuration and click "
-#~ "on\n"
+#~ " * \"%s\": check the current keyboard map configuration and click on\n"
 #~ "the button to change that if necessary.\n"
 #~ "\n"
-#~ " * \"Country\": check the current country selection. If you are not in "
-#~ "this\n"
+#~ " * \"%s\": check the current country selection. If you are not in this\n"
 #~ "country, click on the button and choose another one.\n"
 #~ "\n"
 #~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
@@ -19253,9 +19334,6 @@ msgstr ""
 #~ "Imate dvije opcije ili ćete koristiti LILO pa neće raditi ili nećete\n"
 #~ "koristiti LILO pa vam /boot neće ni trebati."
 
-#~ msgid "Upgrade"
-#~ msgstr "Dogradnja"
-
 #~ msgid "Do you want to configure another printer?"
 #~ msgstr "Želite li podesiti neki drugi pisač?"