updated pot file

1 files changed, 337 insertions, 255 deletions

diff --git a/perl-install/share/po/gl.po b/perl-install/share/po/gl.po
index fe2f72210..483dfd516 100644
--- a/perl-install/share/po/gl.po
+++ b/perl-install/share/po/gl.po
@@ -4,7 +4,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-09-09 17:07+0200\n"
+"POT-Creation-Date: 2003-09-16 13:45+0200\n"
 "PO-Revision-Date: 2001-03-17 19:17+0100\n"
 "Last-Translator: Jesús Bravo Álvarez (mdk) <jba@pobox.com>\n"
 "Language-Team: Galician <trasno@ceu.fi.udc.es>\n"
@@ -175,7 +175,7 @@ msgstr "Tarxeta Ethernet"
 msgid "If set, send the mail report to this email address else send it to root"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1
 #, c-format
 msgid "Parameters"
 msgstr "Parámetros"
@@ -481,6 +481,11 @@ msgstr "Ocupado"
 msgid "Iraq"
 msgstr ""
 
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "connecting to %s ..."
+msgstr "Lendo a base de datos de controladores de CUPS..."
+
 #: ../../standalone/drakgw:1
 #, c-format
 msgid "Potential LAN address conflict found in current config of %s!\n"
@@ -524,6 +529,16 @@ msgstr ""
 msgid "Default desktop"
 msgstr "Por omisión"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid ""
+"To submit a bug report, click on the button report.\n"
+"This will open  a web browser window on %s\n"
+" where you'll find a form to fill in.  The information displayed above will "
+"be \n"
+"transferred to that server."
+msgstr ""
+
 #: ../../lang.pm:1
 #, c-format
 msgid "Venezuela"
@@ -982,6 +997,36 @@ msgstr ""
 "Resto do mundo \n"
 " sen canle-D (liñas dedicadas)"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - /etc/xinetd.d/tftp:\n"
+"        \tdrakTermServ will configure this file to work in conjunction with "
+"the images created\n"
+"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to \n"
+"        \teach diskless client.\n"
+"\n"
+"        \tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \tservice tftp\n"
+"\t\t\t{\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t}\n"
+"        \t\t\n"
+"        \tThe changes here from the default installation are changing the "
+"disable flag to\n"
+"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+"        \tputs its images."
+msgstr ""
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Option %s must be a number!"
@@ -1574,16 +1619,16 @@ msgstr ""
 msgid "Use the %c and %c keys for selecting which entry is highlighted."
 msgstr "Use as teclas %c e %c para seleccionar a entrada marcada."
 
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr ""
-
 #: ../../mouse.pm:1
 #, c-format
 msgid "Generic 2 Button Mouse"
 msgstr "Rato de 2 botóns xenérico"
 
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Enable \"%s\" to execute the file"
+msgstr ""
+
 #: ../../lvm.pm:1
 #, c-format
 msgid "Remove the logical volumes first\n"
@@ -2672,6 +2717,23 @@ msgstr "Este é un paquete obrigatorio, non se pode deseleccionar"
 
 #: ../../standalone/drakTermServ:1
 #, c-format
+msgid ""
+"        - Create etherboot floppies/CDs:\n"
+"        \tThe diskless client machines need either ROM images on the NIC, or "
+"a boot floppy\n"
+"        \tor CD to initate the boot sequence.  drakTermServ will help "
+"generate these\n"
+"        \timages, based on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+"        \t\t\n"
+"        \tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
 msgid "Etherboot ISO image is %s"
 msgstr ""
 
@@ -3053,22 +3115,6 @@ msgstr "mkraid fallou"
 msgid "Auto-detect printers connected to this machine"
 msgstr "Impresora remota"
 
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-
 #: ../../any.pm:1
 #, c-format
 msgid "Sorry, no floppy drive available"
@@ -3566,6 +3612,15 @@ msgstr ""
 msgid "Restore From Tape"
 msgstr "Táboa de particións de rescate"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid ""
+"To submit a bug report, click the report button, which will open your "
+"default browser\n"
+"to Anthill where you will be able to upload the above information as a bug "
+"report."
+msgstr ""
+
 #: ../../network/netconnect.pm:1
 #, c-format
 msgid "Choose the profile to configure"
@@ -3703,7 +3758,7 @@ msgstr ""
 msgid "Need hostname, username and password!"
 msgstr ""
 
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
 #, fuzzy, c-format
 msgid "Insert floppy"
 msgstr "Insira un disquete na unidade %s"
@@ -3841,9 +3896,16 @@ msgstr "O monitor non está configurado"
 msgid "Couldn't access the floppy!"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../install_messages.pm:1
 #, c-format
-msgid "connecting to Bugzilla wizard ..."
+msgid ""
+"Warning: Free Software may not necessarily be patent free, and some Free\n"
+"Software included may be covered by patents in your country. For example, "
+"the\n"
+"MP3 decoders included may require a licence for further usage (see\n"
+"http://www.mp3licensing.com for more details). If you are unsure if a "
+"patent\n"
+"may be applicable to you, check your local laws."
 msgstr ""
 
 #: ../../network/drakfirewall.pm:1
@@ -4022,6 +4084,11 @@ msgstr "Aceptar"
 msgid "Description"
 msgstr "Descrición"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Please enter summary text."
+msgstr ""
+
 #: ../../fsedit.pm:1
 #, c-format
 msgid "Error opening %s for writing: %s"
@@ -4858,7 +4925,7 @@ msgstr ""
 msgid "Right Control key"
 msgstr "Impresora remota"
 
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
 #, fuzzy, c-format
 msgid ""
 "Insert a FAT formatted floppy in drive %s with %s in root directory and "
@@ -5833,6 +5900,22 @@ msgstr ""
 msgid "busmouse"
 msgstr "busmouse"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
+"be created.\n"
+"        \tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical \n"
+"        \tinterface to help manage/customize these images. To create the "
+"file \n"
+"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
+"include in \n"
+"        \tdhcpd.conf, you should create the etherboot images for at least "
+"one full kernel."
+msgstr ""
+
 #: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
 msgid "Account Login (user name)"
@@ -6171,24 +6254,6 @@ msgstr ""
 msgid "Floppy"
 msgstr "Gardar nun disquete"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \t\tdiskless clients.\n"
-"\n"
-"        \t\tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network."
-msgstr ""
-
 #: ../../standalone/drakfont:1
 #, c-format
 msgid "Ghostscript referencing"
@@ -6719,6 +6784,11 @@ msgstr "Compartición da conexión á Internet"
 msgid "Choose file"
 msgstr ""
 
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Summary: "
+msgstr "Resume"
+
 #: ../../network/shorewall.pm:1
 #, c-format
 msgid ""
@@ -6793,6 +6863,17 @@ msgstr "Territorios Franceses do Sul"
 msgid "the vendor name of the processor"
 msgstr ""
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Maintain %s:\n"
+"        \tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
+"        \thelps in this respect by adding or removing system users from this "
+"file."
+msgstr ""
+
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "All data on this partition should be backed-up"
@@ -7083,6 +7164,11 @@ msgstr "Restaurar a partir dun ficheiro"
 msgid "Encryption key for %s"
 msgstr "Os contrasinais non coinciden"
 
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Do you want to recover your system?"
+msgstr "¿Desexa usar aboot?"
+
 #: ../../services.pm:1
 #, c-format
 msgid ""
@@ -7509,6 +7595,11 @@ msgstr "Configurar as X"
 msgid ", "
 msgstr ", "
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Submit lspci"
+msgstr ""
+
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
 msgid "Remove selected host/network"
@@ -7730,6 +7821,11 @@ msgstr ""
 "\n"
 "Vaise configurar a rede de área local usando ese adaptador."
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Submit cpuinfo"
+msgstr ""
+
 #: ../../install_steps_gtk.pm:1
 #, fuzzy, c-format
 msgid "Minimal install"
@@ -7740,6 +7836,11 @@ msgstr "Desinstalar"
 msgid "Ethiopia"
 msgstr "Estonio"
 
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "YES"
+msgstr ""
+
 #: ../../security/l10n.pm:1
 #, c-format
 msgid "Enable \"crontab\" and \"at\" for users"
@@ -8023,13 +8124,6 @@ msgstr "Elixa o paquete a instalar"
 msgid "Printer \"%s\" on SMB/Windows server \"%s\""
 msgstr "Impresora SMB/Windows 95/98/NT"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-
 #: ../../modules/parameters.pm:1
 #, c-format
 msgid "%d comma separated numbers"
@@ -8338,6 +8432,11 @@ msgstr "Frecuencia horizontal do monitor: %s\n"
 msgid "Path"
 msgstr ""
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "NOT FOUND"
+msgstr ""
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
@@ -8886,18 +8985,6 @@ msgstr "importante"
 msgid "Total Progress"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-"        \t\tin this respect by adding or removing system users from this "
-"file."
-msgstr ""
-
 #: ../../help.pm:1
 #, c-format
 msgid ""
@@ -9013,6 +9100,26 @@ msgstr "¿Que configuración de XFree quere usar?"
 msgid "Use Incremental/Differential Backups  (do not replace old backups)"
 msgstr ""
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP \n"
+"        \taddress and net boot images to the machine. drakTermServ helps "
+"create/remove \n"
+"        \tthese entries.\n"
+"\t\t\t\n"
+"        \t(PCI cards may omit the image - etherboot will request the correct "
+"image. \n"
+"\t\t\tYou should also consider that when etherboot looks for the images, it "
+"expects \n"
+"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:"
+msgstr ""
+
 #: ../../harddrake/sound.pm:1
 #, c-format
 msgid "There's no known driver for your sound card (%s)"
@@ -9124,6 +9231,13 @@ msgid ""
 "in number of characters"
 msgstr ""
 
+#: ../../fsedit.pm:1
+#, c-format
+msgid ""
+"You may not be able to install lilo (since lilo doesn't handle a LV on "
+"multiple PVs)"
+msgstr ""
+
 #: ../../install_steps_gtk.pm:1
 #, fuzzy, c-format
 msgid "Updating package selection"
@@ -9387,6 +9501,16 @@ msgstr "Nome de máquina: "
 msgid "Unselect fonts installed"
 msgstr ""
 
+#: ../../mouse.pm:1
+#, c-format
+msgid "Wheel"
+msgstr "Roda"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Submit kernel version"
+msgstr "versión do núcleo"
+
 #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
 #: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
 #: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1
@@ -9408,11 +9532,6 @@ msgstr "Cancelar"
 msgid "Searching for configured scanners ..."
 msgstr "Impresora local"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Wheel"
-msgstr "Roda"
-
 #: ../../harddrake/data.pm:1
 #, fuzzy, c-format
 msgid "Videocard"
@@ -9478,6 +9597,11 @@ msgstr "Por omisión"
 msgid "Button 2 Emulation"
 msgstr ""
 
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Please enter a package name."
+msgstr "Indique o nome de usuario"
+
 #: ../../security/l10n.pm:1
 #, c-format
 msgid "Run chkrootkit checks"
@@ -9557,6 +9681,11 @@ msgid ""
 "\n"
 msgstr ""
 
+#: ../../install_messages.pm:1
+#, c-format
+msgid "http://www.mandrakelinux.com/en/92errata.php3"
+msgstr ""
+
 #: ../../lang.pm:1
 #, c-format
 msgid "Honduras"
@@ -9703,6 +9832,45 @@ msgstr "Tipo de sist. de ficheiros: "
 msgid "Gujarati"
 msgstr ""
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        While you can use a pool of IP addresses, rather than setup a "
+"specific entry for\n"
+"        a client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"        of client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
+"either be 'thin'\n"
+"        or 'fat'.  Thin clients run most software on the server via xdmcp, "
+"while fat clients run \n"
+"        most software on the client machine. A special inittab, %s is\n"
+"        written for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are \n"
+"        modified if thin clients are used, to enable xdmcp. Since there are "
+"security issues in \n"
+"        using xdmcp, hosts.deny and hosts.allow are modified to limit access "
+"to the local\n"
+"        subnet.\n"
+"\t\t\t\n"
+"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
+"Clients can either \n"
+"        be 'true' or 'false'.  'true' enables root login at the client "
+"machine and allows local \n"
+"        hardware configuration of sound, mouse, and X, using the 'drak' "
+"tools. This is enabled \n"
+"        by creating separate config files associated with the client's IP "
+"address and creating \n"
+"        read/write mount points to allow the client to alter the file. Once "
+"you are satisfied \n"
+"        with the configuration, you can remove root login privileges from "
+"the client.\n"
+"\t\t\t\n"
+"        Note: You must stop/start the server after adding or changing "
+"clients."
+msgstr ""
+
 #: ../../interactive/stdio.pm:1
 #, c-format
 msgid ""
@@ -9976,45 +10144,6 @@ msgid ""
 "http://www.linux-mandrake.com/en/hardware.php3"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
-"while fat clients run \n"
-"\t\t\tmost software on the client machine. A special inittab, /etc/inittab\\$"
-"\\$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"\t\t\tmodified if thin clients are used, to enable xdmcp. Since there are "
-"security issues in \n"
-"\t\t\tusing xdmcp, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"\t\t\tsubnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#hdw_config\" entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"\t\t\tbe 'true' or 'false'.  'true' enables root login at the client machine "
-"and allows local \n"
-"\t\t\thardware configuration of sound, mouse, and X, using the 'drak' tools. "
-"This is enabled \n"
-"\t\t\tby creating separate config files associated with the client's IP "
-"address and creating \n"
-"\t\t\tread/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"\t\t\twith the configuration, you can remove root login privileges from the "
-"client.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing clients."
-msgstr ""
-
 #: ../../standalone/drakconnect:1
 #, c-format
 msgid "Configure Local Area Network..."
@@ -10393,23 +10522,11 @@ msgstr "/dev/hda"
 msgid "/dev/hdb"
 msgstr "/dev/hdb"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbug:1
 #, c-format
 msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-"        \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-"        \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-"        \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
+"Application Name\n"
+"or Full Path:"
 msgstr ""
 
 #: ../../services.pm:1
@@ -10778,19 +10895,6 @@ msgstr "Problemas instalando o paquete %s"
 msgid "You will receive an alert if the load is higher than this value"
 msgstr ""
 
-#: ../../standalone/drakbug:1
-#, c-format
-msgid ""
-"\n"
-"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
-"\n"
-msgstr ""
-
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "Add a scanner manually"
@@ -10895,7 +10999,7 @@ msgstr "Opcións da impresora remota lpd"
 msgid "Set the shell timeout. A value of zero means no timeout."
 msgstr ""
 
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
 #, c-format
 msgid "Firmware copy succeeded"
 msgstr ""
@@ -11224,11 +11328,6 @@ msgid ""
 "do you really want to overwrite its configuration?"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "No partition available"
-msgstr "ningunha partición dispoñible"
-
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "Use the scanners on hosts: "
@@ -11239,6 +11338,11 @@ msgstr ""
 msgid "Unselected All"
 msgstr ""
 
+#: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "ningunha partición dispoñible"
+
 #: ../../standalone/printerdrake:1
 #, fuzzy, c-format
 msgid "Printer Management \n"
@@ -11279,7 +11383,7 @@ msgstr ""
 msgid "modem"
 msgstr "Rato"
 
-#: ../../install_steps.pm:1
+#: ../../lang.pm:1
 #, c-format
 msgid "Welcome to %s"
 msgstr "Benvido a %s"
@@ -11351,6 +11455,13 @@ msgstr ""
 msgid "Not the correct CD label. Disk is labelled %s."
 msgstr ""
 
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- Daemon, %s via:\n"
+msgstr ""
+
 #: ../../standalone/drakgw:1
 #, c-format
 msgid ""
@@ -11479,26 +11590,6 @@ msgid ""
 "- System Files:\n"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \t\tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \t\ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"\t\t\t\tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t\t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be turned\n"
-"        back off, retaining the configuration files, once the client machine "
-"is configured."
-msgstr ""
-
 #: ../../standalone/drakbug:1
 #, fuzzy, c-format
 msgid "Standalone Tools"
@@ -12272,7 +12363,7 @@ msgstr ""
 msgid "Local Printer"
 msgstr "Impresora local"
 
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
 #, fuzzy, c-format
 msgid "Floppy access error, unable to mount device %s"
 msgstr "¿Onde desexa montar o dispositivo %s?"
@@ -12374,36 +12465,6 @@ msgstr "Dispositivo do rato: %s\n"
 msgid "Reselect correct fonts"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-"        \t\tdiskless client.\n"
-"\n"
-"        \t\tA typical tftp configuration file looks like:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \t\tputs its images."
-msgstr ""
-
 #: ../../help.pm:1
 #, c-format
 msgid ""
@@ -12654,6 +12715,11 @@ msgstr "maio"
 msgid "Yaboot mode"
 msgstr "Modo de arrinque"
 
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Rato de 3 botóns xenérico"
+
 #: ../../standalone/drakxtv:1
 #, c-format
 msgid "USA (cable)"
@@ -12666,11 +12732,6 @@ msgid ""
 "Launch \"lilo\" as root in command line to complete LiLo theme installation."
 msgstr ""
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Rato de 3 botóns xenérico"
-
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
 msgid "Select another media to restore from"
@@ -12986,23 +13047,6 @@ msgid ""
 " --id <id_label>       - load the html help page which refers to id_label\n"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
-"generate these images,\n"
-"        \t\tbased on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0"
-msgstr ""
-
 #: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
 msgid "Select a scanner model"
@@ -13353,11 +13397,6 @@ msgstr "Nome de dominio"
 msgid "Sharing of local printers"
 msgstr "Impresora local"
 
-#: ../../install_messages.pm:1
-#, c-format
-msgid "http://www.mandrakelinux.com/en/92errata.php3"
-msgstr ""
-
 #: ../../security/help.pm:1
 #, c-format
 msgid "Enable/Disable libsafe if libsafe is found on the system."
@@ -13368,6 +13407,11 @@ msgstr ""
 msgid "Available printers"
 msgstr "Impresora local"
 
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "NO"
+msgstr ""
+
 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Empty"
@@ -13399,21 +13443,6 @@ msgstr ""
 "\n"
 "Pode desconectar ou reconfigurar a súa conexión."
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
-"must be created.\n"
-"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-"        \t\tto help manage/customize these images. To create the file \n"
-"        \t\t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \t\tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-
 #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
 msgid "Interface \"%s\""
@@ -14179,6 +14208,17 @@ msgstr "FAT"
 msgid "Refresh the list"
 msgstr "Lista de usuarios"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Per client %s:\n"
+"        \tThrough clusternfs, each diskless client can have its own unique "
+"configuration files\n"
+"        \ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
+"        \tdrakTermServ will help create these files."
+msgstr ""
+
 #: ../../standalone/drakpxe:1
 #, c-format
 msgid ""
@@ -14711,12 +14751,17 @@ msgstr "Xenérico"
 msgid "Cylinder %d to %d\n"
 msgstr "Cilindro %d a cilindro %d\n"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "YOUR TEXT HERE"
+msgstr ""
+
 #: ../../standalone/drakconnect:1
 #, c-format
 msgid "New profile..."
 msgstr "Novo perfil..."
 
-#: ../../standalone/draksec:1
+#: ../../modules/interactive.pm:1 ../../standalone/draksec:1
 #, c-format
 msgid "NONE"
 msgstr ""
@@ -15262,6 +15307,11 @@ msgstr "Outros"
 msgid "burner"
 msgstr "Impresora"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Bug Description/System Information"
+msgstr ""
+
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
 msgid " (Default is all users)"
@@ -15386,6 +15436,26 @@ msgstr "Opcións de chamada"
 msgid "If no port is given, 631 will be taken as default."
 msgstr ""
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Per client system configuration files:\n"
+"        \tThrough clusternfs, each diskless client can have its own unique "
+"configuration files\n"
+"        \ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
+"        \tclients can customize files such as /etc/modules.conf, /etc/"
+"sysconfig/mouse, \n"
+"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
+"\n"
+"        Note: Enabling local client hardware configuration does enable root "
+"login to the terminal \n"
+"        server on each client machine that has this feature enabled.  Local "
+"configuration can be\n"
+"        turned back off, retaining the configuration files, once the client "
+"machine is configured."
+msgstr ""
+
 #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
@@ -15585,7 +15655,7 @@ msgid ""
 "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
 msgstr ""
 
-#: ../../network/adsl.pm:1 ../../network/netconnect.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
 #, fuzzy, c-format
 msgid "Next"
 msgstr "Texto"
@@ -16780,7 +16850,7 @@ msgstr ""
 msgid "format of floppies supported by the drive"
 msgstr ""
 
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
 #, c-format
 msgid "Firmware copy failed, file %s not found"
 msgstr ""
@@ -17346,6 +17416,11 @@ msgstr ""
 "\n"
 "¿Concorda coa perda de tódalas particións?\n"
 
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Find Package"
+msgstr "%d paquetes"
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Are you sure that you want to set up printing on this machine?\n"
@@ -17461,6 +17536,24 @@ msgstr "Configuración da LAN"
 msgid "hard disk model"
 msgstr "Memoria da tarxeta (DMA)"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Maintain /etc/exports:\n"
+"        \tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+"        \tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+"        \tdiskless clients.\n"
+"\n"
+"        \tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t/\t\t\t\t\t(ro,all_squash)\n"
+"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"        \tWith SUBNET/MASK being defined for your network."
+msgstr ""
+
 #: ../../fsedit.pm:1
 #, c-format
 msgid "You can't use a LVM Logical Volume for mount point %s"
@@ -17635,16 +17728,16 @@ msgstr "Británico"
 msgid "Unmount"
 msgstr "Desmontar"
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Uninstall Fonts"
-msgstr "Desinstalando os RPMs"
-
 #: ../../mouse.pm:1
 #, fuzzy, c-format
 msgid "Microsoft Explorer"
 msgstr "Microsoft IntelliMouse"
 
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Uninstall Fonts"
+msgstr "Desinstalando os RPMs"
+
 #: ../../keyboard.pm:1
 #, c-format
 msgid "German (no dead keys)"
@@ -17994,17 +18087,6 @@ msgstr "Lendo a base de datos de controladores de CUPS..."
 msgid "enable radio support"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \t\ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \t\tdrakTermServ will help create these files."
-msgstr ""
-
 #: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
 msgid "Scanner sharing to hosts: "