sync with code

1 files changed, 261 insertions, 200 deletions

diff --git a/perl-install/share/po/cs.po b/perl-install/share/po/cs.po
index a6ea477f2..d4151fc53 100644
--- a/perl-install/share/po/cs.po
+++ b/perl-install/share/po/cs.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: drakx_share\n"
-"POT-Creation-Date: 2012-12-14 15:17+0100\n"
+"POT-Creation-Date: 2013-04-06 03:21+0200\n"
 "PO-Revision-Date: 2012-03-10 14:30+0000\n"
 "Last-Translator: Oliver Burger <oliver.bgr@googlemail.com>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -15,7 +15,7 @@ msgstr ""
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2\n"
 
-#: any.pm:261 any.pm:971 diskdrake/interactive.pm:645
+#: any.pm:255 any.pm:964 diskdrake/interactive.pm:645
 #: diskdrake/interactive.pm:869 diskdrake/interactive.pm:931
 #: diskdrake/interactive.pm:1036 diskdrake/interactive.pm:1266
 #: diskdrake/interactive.pm:1324 do_pkgs.pm:242 do_pkgs.pm:287
@@ -24,12 +24,12 @@ msgstr ""
 msgid "Please wait"
 msgstr "Prosím počkejte"
 
-#: any.pm:261
+#: any.pm:255
 #, c-format
 msgid "Bootloader installation in progress"
 msgstr "Probíhá instalace zaváděcího programu"
 
-#: any.pm:272
+#: any.pm:266
 #, c-format
 msgid ""
 "LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
@@ -47,12 +47,12 @@ msgstr ""
 "\n"
 "Přiřadit nové ID svazku?"
 
-#: any.pm:283
+#: any.pm:277
 #, c-format
 msgid "Installation of bootloader failed. The following error occurred:"
 msgstr "Instalace zaváděcího programu selhala. Stala se tato chyba:"
 
-#: any.pm:289
+#: any.pm:283
 #, c-format
 msgid ""
 "You may need to change your Open Firmware boot-device to\n"
@@ -69,7 +69,7 @@ msgstr ""
 " Potom zadejte: shut-down\n"
 "Při dalším spuštění už uvidíte prompt."
 
-#: any.pm:329
+#: any.pm:323
 #, c-format
 msgid ""
 "You decided to install the bootloader on a partition.\n"
@@ -84,268 +84,268 @@ msgstr ""
 "\n"
 "Z jakého disku startujete systém?"
 
-#: any.pm:340
+#: any.pm:334
 #, c-format
 msgid "Bootloader Installation"
 msgstr "Instalace zaváděcího programu"
 
-#: any.pm:344
+#: any.pm:338
 #, c-format
 msgid "Where do you want to install the bootloader?"
 msgstr "Kam chcete nainstalovat zaváděcí program?"
 
-#: any.pm:368
+#: any.pm:362
 #, c-format
 msgid "First sector (MBR) of drive %s"
 msgstr "První sektor (MBR) disku %s"
 
-#: any.pm:370
+#: any.pm:364
 #, c-format
 msgid "First sector of drive (MBR)"
 msgstr "První sektor disku (MBR)"
 
-#: any.pm:372
+#: any.pm:366
 #, c-format
 msgid "First sector of the root partition"
 msgstr "První sektor kořenového oddílu"
 
-#: any.pm:374
+#: any.pm:368
 #, c-format
 msgid "On Floppy"
 msgstr "Na disketu"
 
-#: any.pm:376 pkgs.pm:283 ugtk2.pm:526
+#: any.pm:370 pkgs.pm:283 ugtk2.pm:526
 #, c-format
 msgid "Skip"
 msgstr "Přeskočit"
 
-#: any.pm:411
+#: any.pm:405
 #, c-format
 msgid "Boot Style Configuration"
 msgstr "Nastavení stylu zavádění"
 
-#: any.pm:427 any.pm:460 any.pm:461
+#: any.pm:420 any.pm:453 any.pm:454
 #, c-format
 msgid "Bootloader main options"
 msgstr "Základní nastavení zaváděcího programu"
 
-#: any.pm:431
+#: any.pm:424
 #, c-format
 msgid "Bootloader"
 msgstr "Zaváděcí program"
 
-#: any.pm:432 any.pm:464
+#: any.pm:425 any.pm:457
 #, c-format
 msgid "Bootloader to use"
 msgstr "Zaváděcí program"
 
-#: any.pm:435 any.pm:467
+#: any.pm:428 any.pm:460
 #, c-format
 msgid "Boot device"
 msgstr "Startovací zařízení"
 
-#: any.pm:438
+#: any.pm:431
 #, c-format
 msgid "Main options"
 msgstr "Hlavní volby"
 
-#: any.pm:439
+#: any.pm:432
 #, c-format
 msgid "Delay before booting default image"
 msgstr "Prodleva před zavedením výchozího obrazu"
 
-#: any.pm:440
+#: any.pm:433
 #, c-format
 msgid "Enable ACPI"
 msgstr "Povolit ACPI"
 
-#: any.pm:441
+#: any.pm:434
 #, c-format
 msgid "Enable SMP"
 msgstr "Povolit SMP"
 
-#: any.pm:442
+#: any.pm:435
 #, c-format
 msgid "Enable APIC"
 msgstr "Povolit APIC"
 
-#: any.pm:444
+#: any.pm:437
 #, c-format
 msgid "Enable Local APIC"
 msgstr "Povolit lokální APIC"
 
-#: any.pm:445 security/level.pm:63
+#: any.pm:438 security/level.pm:63
 #, c-format
 msgid "Security"
 msgstr "Bezpečnost"
 
-#: any.pm:446 any.pm:906 any.pm:925 authentication.pm:249
+#: any.pm:439 any.pm:899 any.pm:918 authentication.pm:249
 #: diskdrake/smbnfs_gtk.pm:181
 #, c-format
 msgid "Password"
 msgstr "Heslo"
 
-#: any.pm:449 authentication.pm:260
+#: any.pm:442 authentication.pm:260
 #, c-format
 msgid "The passwords do not match"
 msgstr "Hesla nejsou shodná"
 
-#: any.pm:449 authentication.pm:260 diskdrake/interactive.pm:1499
+#: any.pm:442 authentication.pm:260 diskdrake/interactive.pm:1499
 #, c-format
 msgid "Please try again"
 msgstr "Zkuste to znovu, prosím"
 
-#: any.pm:451
+#: any.pm:444
 #, c-format
 msgid "You cannot use a password with %s"
 msgstr "Nemůžete použít heslo s %s"
 
-#: any.pm:455 any.pm:909 any.pm:927 authentication.pm:250
+#: any.pm:448 any.pm:902 any.pm:920 authentication.pm:250
 #, c-format
 msgid "Password (again)"
 msgstr "Heslo (podruhé)"
 
-#: any.pm:456
+#: any.pm:449
 #, c-format
 msgid "Clean /tmp at each boot"
 msgstr "Vyčistit adresář /tmp při každém startu"
 
-#: any.pm:466
+#: any.pm:459
 #, c-format
 msgid "Init Message"
 msgstr "Úvodní zpráva"
 
-#: any.pm:468
+#: any.pm:461
 #, c-format
 msgid "Open Firmware Delay"
 msgstr "Prodleva pro firmware"
 
-#: any.pm:469
+#: any.pm:462
 #, c-format
 msgid "Kernel Boot Timeout"
 msgstr "Prodleva při spuštění"
 
-#: any.pm:470
+#: any.pm:463
 #, c-format
 msgid "Enable CD Boot?"
 msgstr "Povolit spuštění z CD?"
 
-#: any.pm:471
+#: any.pm:464
 #, c-format
 msgid "Enable OF Boot?"
 msgstr "Povolit zavaděč OF?"
 
-#: any.pm:472
+#: any.pm:465
 #, c-format
 msgid "Default OS?"
 msgstr "Výchozí OS?"
 
-#: any.pm:546
+#: any.pm:539
 #, c-format
 msgid "Image"
 msgstr "Obraz(image)"
 
-#: any.pm:547 any.pm:561
+#: any.pm:540 any.pm:554
 #, c-format
 msgid "Root"
 msgstr "Kořenový(root)"
 
-#: any.pm:548 any.pm:574
+#: any.pm:541 any.pm:567
 #, c-format
 msgid "Append"
 msgstr "Připojit"
 
-#: any.pm:550
+#: any.pm:543
 #, c-format
 msgid "Xen append"
 msgstr "Připojit Xen"
 
-#: any.pm:552
+#: any.pm:545
 #, c-format
 msgid "Requires password to boot"
 msgstr "Vyžaduje pro zavedení heslo"
 
-#: any.pm:554
+#: any.pm:547
 #, c-format
 msgid "Video mode"
 msgstr "Video režim"
 
-#: any.pm:556
+#: any.pm:549
 #, c-format
 msgid "Initrd"
 msgstr "Initrd"
 
-#: any.pm:557
+#: any.pm:550
 #, c-format
 msgid "Network profile"
 msgstr "Síťový profil"
 
-#: any.pm:566 any.pm:571 any.pm:573 diskdrake/interactive.pm:411
+#: any.pm:559 any.pm:564 any.pm:566 diskdrake/interactive.pm:411
 #, c-format
 msgid "Label"
 msgstr "Značka"
 
-#: any.pm:568 any.pm:576 harddrake/v4l.pm:438
+#: any.pm:561 any.pm:569 harddrake/v4l.pm:438
 #, c-format
 msgid "Default"
 msgstr "Výchozí"
 
-#: any.pm:575
+#: any.pm:568
 #, c-format
 msgid "NoVideo"
 msgstr "Bez Videa"
 
-#: any.pm:586
+#: any.pm:579
 #, c-format
 msgid "Empty label not allowed"
 msgstr "Prázdná značka není povolena"
 
-#: any.pm:587
+#: any.pm:580
 #, c-format
 msgid "You must specify a kernel image"
 msgstr "Musíte zadat soubor s jádrem"
 
-#: any.pm:587
+#: any.pm:580
 #, c-format
 msgid "You must specify a root partition"
 msgstr "Musíte zadat kořenový oddíl"
 
-#: any.pm:588
+#: any.pm:581
 #, c-format
 msgid "This label is already used"
 msgstr "Tato značka se již používá"
 
-#: any.pm:606
+#: any.pm:599
 #, c-format
 msgid "Which type of entry do you want to add?"
 msgstr "Jaký typ záznamu chcete přidat?"
 
-#: any.pm:607
+#: any.pm:600
 #, c-format
 msgid "Linux"
 msgstr "Linux"
 
-#: any.pm:607
+#: any.pm:600
 #, c-format
 msgid "Other OS (SunOS...)"
 msgstr "Jiný systém (SunOs...)"
 
-#: any.pm:608
+#: any.pm:601
 #, c-format
 msgid "Other OS (MacOS...)"
 msgstr "Jiný systém (MacOs...)"
 
-#: any.pm:608
+#: any.pm:601
 #, c-format
 msgid "Other OS (Windows...)"
 msgstr "Jiný systém (Windows...)"
 
-#: any.pm:655
+#: any.pm:648
 #, c-format
 msgid "Bootloader Configuration"
 msgstr "Nastavení zaváděcího programu"
 
-#: any.pm:656
+#: any.pm:649
 #, c-format
 msgid ""
 "Here are the entries on your boot menu so far.\n"
@@ -354,47 +354,47 @@ msgstr ""
 "Zde jsou záznamy z vašeho zaváděcího menu.\n"
 "Můžete přidat další nebo změnit stávající."
 
-#: any.pm:867
+#: any.pm:860
 #, c-format
 msgid "access to X programs"
 msgstr "přístup k programům v X prostředí"
 
-#: any.pm:868
+#: any.pm:861
 #, c-format
 msgid "access to rpm tools"
 msgstr "přístup k rpm nástrojům"
 
-#: any.pm:869
+#: any.pm:862
 #, c-format
 msgid "allow \"su\""
 msgstr "povolit \"su\""
 
-#: any.pm:870
+#: any.pm:863
 #, c-format
 msgid "access to administrative files"
 msgstr "přístup k administrativním souborům"
 
-#: any.pm:871
+#: any.pm:864
 #, c-format
 msgid "access to network tools"
 msgstr "přístup k síťovým nástrojům"
 
-#: any.pm:872
+#: any.pm:865
 #, c-format
 msgid "access to compilation tools"
 msgstr "přístup k nástrojům pro kompilaci"
 
-#: any.pm:878
+#: any.pm:871
 #, c-format
 msgid "(already added %s)"
 msgstr "(už byl přidán %s)"
 
-#: any.pm:884
+#: any.pm:877
 #, c-format
 msgid "Please give a user name"
 msgstr "Prosím zadejte uživatelské jméno"
 
-#: any.pm:885
+#: any.pm:878
 #, c-format
 msgid ""
 "The user name must start with a lower case letter followed by only lower "
@@ -403,148 +403,148 @@ msgstr ""
 "Uživatelské jméno musí začínat malým písmenem a pokračovat pouze malými "
 "písmeny, číslicemi nebo znaky „-” a „_”"
 
-#: any.pm:886
+#: any.pm:879
 #, c-format
 msgid "The user name is too long"
 msgstr "Toto uživatelské jméno je příliš dlouhé"
 
-#: any.pm:887
+#: any.pm:880
 #, c-format
 msgid "This user name has already been added"
 msgstr "Toto uživatelské jméno už bylo přidáno"
 
-#: any.pm:893 any.pm:929
+#: any.pm:886 any.pm:922
 #, c-format
 msgid "User ID"
 msgstr "ID uživatele"
 
-#: any.pm:893 any.pm:930
+#: any.pm:886 any.pm:923
 #, c-format
 msgid "Group ID"
 msgstr "ID skupiny"
 
-#: any.pm:894
+#: any.pm:887
 #, c-format
 msgid "%s must be a number"
 msgstr "%s musí být číslo"
 
-#: any.pm:895
+#: any.pm:888
 #, c-format
 msgid "%s should be above 500. Accept anyway?"
 msgstr "%s by mělo být vyšší než 500. Přesto použít?"
 
-#: any.pm:899
+#: any.pm:892
 #, c-format
 msgid "User management"
 msgstr "Správa uživatelů"
 
-#: any.pm:904
+#: any.pm:897
 #, c-format
 msgid "Enable guest account"
 msgstr "Povolit účet hosta"
 
-#: any.pm:905 authentication.pm:236
+#: any.pm:898 authentication.pm:236
 #, c-format
 msgid "Set administrator (root) password"
 msgstr "Heslo správce (uživatele root)"
 
-#: any.pm:911
+#: any.pm:904
 #, c-format
 msgid "Enter a user"
 msgstr "Zadejte uživatele"
 
-#: any.pm:913
+#: any.pm:906
 #, c-format
 msgid "Icon"
 msgstr "Ikona"
 
-#: any.pm:916
+#: any.pm:909
 #, c-format
 msgid "Real name"
 msgstr "Skutečné jméno"
 
-#: any.pm:923
+#: any.pm:916
 #, c-format
 msgid "Login name"
 msgstr "Přihlašovací jméno"
 
-#: any.pm:928
+#: any.pm:921
 #, c-format
 msgid "Shell"
 msgstr "Shell"
 
-#: any.pm:971
+#: any.pm:964
 #, c-format
 msgid "Please wait, adding media..."
 msgstr "Prosím počkejte, přidávám zdroje..."
 
-#: any.pm:1003 security/l10n.pm:14
+#: any.pm:996 security/l10n.pm:14
 #, c-format
 msgid "Autologin"
 msgstr "Automatické přihlášení"
 
-#: any.pm:1004
+#: any.pm:997
 #, c-format
 msgid "I can set up your computer to automatically log on one user."
 msgstr ""
 "Můžu nastavit váš počítač tak, aby automaticky přihlásil vybraného uživatele."
 
-#: any.pm:1005
+#: any.pm:998
 #, c-format
 msgid "Use this feature"
 msgstr "Použít tuto vlastnost"
 
-#: any.pm:1006
+#: any.pm:999
 #, c-format
 msgid "Choose the default user:"
 msgstr "Zvolte standardního uživatele:"
 
-#: any.pm:1007
+#: any.pm:1000
 #, c-format
 msgid "Choose the window manager to run:"
 msgstr "Vyberte si, který správce oken má být spouštěn:"
 
-#: any.pm:1018 any.pm:1032 any.pm:1100
+#: any.pm:1011 any.pm:1025 any.pm:1093
 #, c-format
 msgid "Release Notes"
 msgstr "Poznámky k vydání"
 
-#: any.pm:1039 any.pm:1389 interactive/gtk.pm:817
+#: any.pm:1032 any.pm:1382 interactive/gtk.pm:821
 #, c-format
 msgid "Close"
 msgstr "Zavřít"
 
-#: any.pm:1086
+#: any.pm:1079
 #, c-format
 msgid "License agreement"
 msgstr "Souhlas s licencí"
 
-#: any.pm:1088 diskdrake/dav.pm:26
+#: any.pm:1081 diskdrake/dav.pm:26 mygtk2.pm:1222
 #, c-format
 msgid "Quit"
 msgstr "Konec"
 
-#: any.pm:1095
+#: any.pm:1088
 #, c-format
 msgid "Do you accept this license ?"
 msgstr "Přijímáte tuto licenci?"
 
-#: any.pm:1096
+#: any.pm:1089
 #, c-format
 msgid "Accept"
 msgstr "Přijmout"
 
-#: any.pm:1096
+#: any.pm:1089
 #, c-format
 msgid "Refuse"
 msgstr "Odmítnout"
 
-#: any.pm:1122 any.pm:1185
+#: any.pm:1115 any.pm:1178
 #, c-format
 msgid "Please choose a language to use"
 msgstr "Prosím zvolte si jazyk, který chcete používat"
 
-#: any.pm:1150
+#: any.pm:1143
 #, c-format
 msgid ""
 "%s can support multiple languages. Select\n"
@@ -555,87 +555,87 @@ msgstr ""
 "chcete nainstalovat podporu. Tyto budou dostupné po dokončení\n"
 "instalace a restartu systému."
 
-#: any.pm:1152 fs/partitioning_wizard.pm:174
+#: any.pm:1145 fs/partitioning_wizard.pm:174
 #, c-format
 msgid "Mageia"
 msgstr "Mageia"
 
-#: any.pm:1153
+#: any.pm:1146
 #, c-format
 msgid "Multiple languages"
 msgstr "Více jazyků"
 
-#: any.pm:1154
+#: any.pm:1147
 #, c-format
 msgid "Select Additional Languages"
 msgstr ""
 
-#: any.pm:1163 any.pm:1194
+#: any.pm:1156 any.pm:1187
 #, c-format
 msgid "Old compatibility (non UTF-8) encoding"
 msgstr "Stará (ne UTF-8) kódování pro kompatibilitu"
 
-#: any.pm:1164
+#: any.pm:1157
 #, c-format
 msgid "All languages"
 msgstr "Všechny jazyky"
 
-#: any.pm:1186
+#: any.pm:1179
 #, c-format
 msgid "Language choice"
 msgstr "Výběr jazyka"
 
-#: any.pm:1240
+#: any.pm:1233
 #, c-format
 msgid "Country / Region"
 msgstr "Země"
 
-#: any.pm:1241
+#: any.pm:1234
 #, c-format
 msgid "Please choose your country"
 msgstr "Vyberte si prosím svoji zem"
 
-#: any.pm:1243
+#: any.pm:1236
 #, c-format
 msgid "Here is the full list of available countries"
 msgstr "Zde je kompletní seznam dostupných zemí"
 
-#: any.pm:1244
+#: any.pm:1237
 #, c-format
 msgid "Other Countries"
 msgstr "Jiné země"
 
-#: any.pm:1244 interactive.pm:489 interactive/gtk.pm:445
+#: any.pm:1237 interactive.pm:489 interactive/gtk.pm:445
 #, c-format
 msgid "Advanced"
 msgstr "Rozšíření"
 
-#: any.pm:1250
+#: any.pm:1243
 #, c-format
 msgid "Input method:"
 msgstr "Vstupní metoda:"
 
-#: any.pm:1253
+#: any.pm:1246
 #, c-format
 msgid "None"
 msgstr "Žádné"
 
-#: any.pm:1334
+#: any.pm:1327
 #, c-format
 msgid "No sharing"
 msgstr "Nesdílet"
 
-#: any.pm:1334
+#: any.pm:1327
 #, c-format
 msgid "Allow all users"
 msgstr "Povolit všem uživatelům"
 
-#: any.pm:1334
+#: any.pm:1327
 #, c-format
 msgid "Custom"
 msgstr "Vlastní"
 
-#: any.pm:1338
+#: any.pm:1331
 #, c-format
 msgid ""
 "Would you like to allow users to share some of their directories?\n"
@@ -651,7 +651,7 @@ msgstr ""
 "\n"
 "Lze také provést \"Vlastní\" povolení pro jednotlivé uživatele.\n"
 
-#: any.pm:1350
+#: any.pm:1343
 #, c-format
 msgid ""
 "NFS: the traditional Unix file sharing system, with less support on Mac and "
@@ -660,7 +660,7 @@ msgstr ""
 "NFS: tradiční systém pro sdílení souborů v prostředí Unix, s menší podporou "
 "operačních systémů Mac a Windows."
 
-#: any.pm:1353
+#: any.pm:1346
 #, c-format
 msgid ""
 "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
@@ -669,7 +669,7 @@ msgstr ""
 "SMB: systém pro sdílení souborů používaný ve Windows, MacOS X a mnohými "
 "moderními Linuxovými systémy."
 
-#: any.pm:1361
+#: any.pm:1354
 #, c-format
 msgid ""
 "You can export using NFS or SMB. Please select which you would like to use."
@@ -677,12 +677,12 @@ msgstr ""
 "Nyní lze provést export přes protokol NFS nebo SMB. Vyberte prosím, který "
 "chcete použít."
 
-#: any.pm:1389
+#: any.pm:1382
 #, c-format
 msgid "Launch userdrake"
 msgstr "Spustit UserDrake"
 
-#: any.pm:1391
+#: any.pm:1384
 #, c-format
 msgid ""
 "The per-user sharing uses the group \"fileshare\". \n"
@@ -691,7 +691,7 @@ msgstr ""
 "Sdílení mezi uživateli používá skupinu \"fileshare\". \n"
 "Uživatele lze do této skupiny přidat pomocí nástroje UserDrake."
 
-#: any.pm:1498
+#: any.pm:1491
 #, c-format
 msgid ""
 "You need to logout and back in again for changes to take effect. Press OK to "
@@ -700,47 +700,47 @@ msgstr ""
 "Aby se změny projevily, je nutné se odhlásit a opět přihlásit. Stisknutím OK "
 "se ihned odhlásíte."
 
-#: any.pm:1502
+#: any.pm:1495
 #, c-format
 msgid "You need to log out and back in again for changes to take effect"
 msgstr "Aby se změna projevila, je nutné se odhlásit a opět přihlásit"
 
-#: any.pm:1537
+#: any.pm:1530
 #, c-format
 msgid "Timezone"
 msgstr "Časová zóna"
 
-#: any.pm:1537
+#: any.pm:1530
 #, c-format
 msgid "Which is your timezone?"
 msgstr "Jaké je vaše časové pásmo?"
 
-#: any.pm:1560 any.pm:1562
+#: any.pm:1553 any.pm:1555
 #, c-format
 msgid "Date, Clock & Time Zone Settings"
 msgstr "Nastavení data, hodin a časové zóny"
 
-#: any.pm:1563
+#: any.pm:1556
 #, c-format
 msgid "What is the best time?"
 msgstr "Jaké vedení času je nejvhodnější?"
 
-#: any.pm:1567
+#: any.pm:1560
 #, c-format
 msgid "%s (hardware clock set to UTC)"
 msgstr "%s (hardwarové hodiny nastaveny na UTC)"
 
-#: any.pm:1568
+#: any.pm:1561
 #, c-format
 msgid "%s (hardware clock set to local time)"
 msgstr "%s (hardwarové hodiny nastaveny na místní čas)"
 
-#: any.pm:1570
+#: any.pm:1563
 #, c-format
 msgid "NTP Server"
 msgstr "NTP Server"
 
-#: any.pm:1571
+#: any.pm:1564
 #, c-format
 msgid "Automatic time synchronization (using NTP)"
 msgstr "Automatická synchronizace času (pomocí NTP)"
@@ -1079,7 +1079,7 @@ msgid "Domain Admin Password"
 msgstr "Heslo Správce domény"
 
 #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:998
+#: bootloader.pm:1014
 #, c-format
 msgid ""
 "Welcome to the operating system chooser!\n"
@@ -1094,47 +1094,47 @@ msgstr ""
 "vyckejte na automaticke zavedeni.\n"
 "\n"
 
-#: bootloader.pm:1190
+#: bootloader.pm:1206
 #, c-format
 msgid "LILO with text menu"
 msgstr "LILO s textovým menu"
 
-#: bootloader.pm:1191
+#: bootloader.pm:1207
 #, fuzzy, c-format
 msgid "GRUB2 with graphical menu"
 msgstr "GRUB s grafickým menu"
 
-#: bootloader.pm:1192
+#: bootloader.pm:1208
 #, c-format
 msgid "GRUB with graphical menu"
 msgstr "GRUB s grafickým menu"
 
-#: bootloader.pm:1193
+#: bootloader.pm:1209
 #, c-format
 msgid "GRUB with text menu"
 msgstr "GRUB s textovým menu"
 
-#: bootloader.pm:1194
+#: bootloader.pm:1210
 #, c-format
 msgid "Yaboot"
 msgstr "Yaboot"
 
-#: bootloader.pm:1195
+#: bootloader.pm:1211
 #, c-format
 msgid "SILO"
 msgstr "SILO"
 
-#: bootloader.pm:1281
+#: bootloader.pm:1297
 #, c-format
 msgid "not enough room in /boot"
 msgstr "není dost místa v adresáři /boot"
 
-#: bootloader.pm:2030
+#: bootloader.pm:2079
 #, c-format
 msgid "You cannot install the bootloader on a %s partition\n"
 msgstr "Na oddíl %s nelze instalovat zavaděč\n"
 
-#: bootloader.pm:2197
+#: bootloader.pm:2248
 #, c-format
 msgid ""
 "Your bootloader configuration must be updated because partition has been "
@@ -1143,7 +1143,7 @@ msgstr ""
 "Nastavení vašeho zavaděče musí být aktualizováno, protože se změnilo pořadí "
 "oddílů na disku"
 
-#: bootloader.pm:2210
+#: bootloader.pm:2261
 #, c-format
 msgid ""
 "The bootloader cannot be installed correctly. You have to boot rescue and "
@@ -1152,7 +1152,7 @@ msgstr ""
 "Zavaděč se nepodařilo řádně nainstalovat. Spusťte systém v záchranném režimu "
 "a zvolte \"%s\""
 
-#: bootloader.pm:2211
+#: bootloader.pm:2262
 #, c-format
 msgid "Re-install Boot Loader"
 msgstr "Znovu instalovat zaváděcí program"
@@ -1252,7 +1252,7 @@ msgstr "Přípojný bod"
 msgid "Options"
 msgstr "Volby"
 
-#: diskdrake/dav.pm:68 interactive.pm:388 interactive/gtk.pm:453
+#: diskdrake/dav.pm:68 interactive.pm:388 interactive/gtk.pm:457
 #, c-format
 msgid "Remove"
 msgstr "Odebrat"
@@ -1358,7 +1358,7 @@ msgid "Continue"
 msgstr "Pokračovat"
 
 #: diskdrake/hd_gtk.pm:188 fs/partitioning_wizard.pm:555 interactive.pm:654
-#: interactive/gtk.pm:809 interactive/gtk.pm:827 interactive/gtk.pm:848
+#: interactive/gtk.pm:813 interactive/gtk.pm:831 interactive/gtk.pm:862
 #: ugtk2.pm:936
 #, c-format
 msgid "Help"
@@ -1481,7 +1481,7 @@ msgid "More"
 msgstr "Více"
 
 #: diskdrake/interactive.pm:281 diskdrake/interactive.pm:294
-#: diskdrake/interactive.pm:1293
+#: diskdrake/interactive.pm:1293 mygtk2.pm:1221
 #, c-format
 msgid "Confirmation"
 msgstr "Potvrzení"
@@ -2277,8 +2277,8 @@ msgstr "Změnit typ"
 
 #: diskdrake/smbnfs_gtk.pm:81 interactive.pm:130 interactive.pm:551
 #: interactive/curses.pm:267 interactive/http.pm:104 interactive/http.pm:160
-#: interactive/stdio.pm:39 interactive/stdio.pm:148 mygtk2.pm:846 ugtk2.pm:415
-#: ugtk2.pm:517 ugtk2.pm:526 ugtk2.pm:812
+#: interactive/stdio.pm:39 interactive/stdio.pm:148 mygtk2.pm:846
+#: mygtk2.pm:1222 ugtk2.pm:415 ugtk2.pm:517 ugtk2.pm:526 ugtk2.pm:812
 #, c-format
 msgid "Cancel"
 msgstr "Zrušit"
@@ -2788,12 +2788,12 @@ msgstr "Zde je obsah vašeho disku "
 msgid "Partitioning failed: %s"
 msgstr "Vytváření diskových oddílů selhalo: %s"
 
-#: fs/type.pm:389
+#: fs/type.pm:390
 #, c-format
 msgid "You cannot use JFS for partitions smaller than 16MB"
 msgstr "Pro oddíl menší než 16MB nelze použít JFS"
 
-#: fs/type.pm:390
+#: fs/type.pm:391
 #, c-format
 msgid "You cannot use ReiserFS for partitions smaller than 32MB"
 msgstr "Pro oddíl menší než 32MB nelze použít ReiserFS"
@@ -3289,7 +3289,7 @@ msgstr ""
 "- nové ALSA API které má mnoho pokročilých vlastností, ale musíte používat "
 "knihovny ALSA.\n"
 
-#: harddrake/sound.pm:385 harddrake/sound.pm:468
+#: harddrake/sound.pm:385 harddrake/sound.pm:487
 #, c-format
 msgid "Driver:"
 msgstr "Ovladač:"
@@ -3342,60 +3342,74 @@ msgstr "Řešení problémů se zvukem"
 #: harddrake/sound.pm:430
 #, c-format
 msgid ""
-"The classic bug sound tester is to run the following commands:\n"
+"Below are some basic tips to help debug audio problems, but for accurate and "
+"up-to-date tips and tricks, please see:\n"
 "\n"
+"https://wiki.mageia.org/en/Support:DebuggingSoundProblems\n"
 "\n"
-"- \"lspcidrake -v | fgrep -i AUDIO\" will tell you which driver your card "
-"uses\n"
-"by default\n"
 "\n"
-"- \"grep sound-slot /etc/modprobe.conf\" will tell you what driver it\n"
-"currently uses\n"
 "\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"- General Recommendation: Enable PulseAudio. If you have opted to not to use "
+"PulseAudio, we would strongly advise you enable it. For the vast majority of "
+"desktop use cases, PulseAudio is the recommended and best supported option.\n"
 "\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services are configured to be run on\n"
-"initlevel 3\n"
 "\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
 "\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-"Klasický postup při řešení problémů se zvukem je pomocí těchto příkazů:\n"
+"- \"kmix\" (KDE), \"gnome-control-center sound\" (GNOME) and \"pauvucontrol"
+"\" (generic) will launch graphical applications to allow you to view your "
+"sound devices and adjust volume levels\n"
+"\n"
+"\n"
+"- \"ps aux | grep pulseaudio\" will check that PulseAudio is running.\n"
+"\n"
+"\n"
+"- \"pactl stat\" will check that you can connect to the PulseAudio daemon "
+"correctly.\n"
+"\n"
 "\n"
+"- \"pactl list sink-inputs\" will tell you which programs are currently "
+"playing sound via PulseAudio.\n"
 "\n"
-"- \"lspcidrake -v | fgrep -i AUDIO\" vám řekne, jaký ovladač je výchozí pro\n"
-"danou zvukovou kartu\n"
 "\n"
-"- \"grep sound-slot /etc/modprobe.conf\" vám řekne, který ovladač se nyní\n"
-"používá\n"
+"- \"systemctl status osspd.service\" will tell you the current state of the "
+"OSS Proxy Daemon. This is used to enable sound from legacy applications "
+"which use the OSS sound API. You should install the \"ossp\" package if you "
+"need this functionality.\n"
 "\n"
-"- \"/sbin/lsmod\" provede kontrolu toho, zda modul (ovladač) je nahrán nebo "
-"ne\n"
 "\n"
-"- \"/sbin/chkconfig --list sound\" a \"/sbin/chkconfig --list alsa\" vám "
-"sdělí\n"
-"zda je pro initlevel nastaveny služby alsa a sound\n"
+"- \"pacmd ls\" will give you a LOT of debug information about the current "
+"state of your audio.\n"
 "\n"
-"- \"aumix -q\" vám řekne, zda je zvuk ztlumen nebo ne\n"
 "\n"
-"- \"/sbin/fuser -v /dev/dsp\" vám řekne, který program používá zvukovou "
-"kartu.\n"
+"- \"lspcidrake -v | grep -i audio\" will tell you which low-level driver "
+"your card uses by default.\n"
+"\n"
+"\n"
+"- \"/usr/sbin/lsmod | grep snd\" will enable you to check which sound "
+"related kernel modules (drivers) are loaded.\n"
+"\n"
+"\n"
+"- \"alsamixer -c 0\" will give you a text-based mixer to the low level ALSA "
+"mixer controls for first sound card\n"
+"\n"
+"\n"
+"- \"/usr/sbin/fuser -v /dev/snd/pcm* /dev/dsp\" will tell which programs are "
+"currently using the sound card directly (normally this should only show "
+"PulseAudio)\n"
+msgstr ""
 
-#: harddrake/sound.pm:457
+#: harddrake/sound.pm:476
 #, c-format
 msgid "Let me pick any driver"
 msgstr "Umožnit výběr ovladače"
 
-#: harddrake/sound.pm:460
+#: harddrake/sound.pm:479
 #, c-format
 msgid "Choosing an arbitrary driver"
 msgstr "Výběr libovolného ovladače"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:463
+#: harddrake/sound.pm:482
 #, c-format
 msgid ""
 "If you really think that you know which driver is the right one for your "
@@ -3474,12 +3488,12 @@ msgstr "Ne"
 msgid "Choose a file"
 msgstr "Vyberte soubor"
 
-#: interactive.pm:388 interactive/gtk.pm:453
+#: interactive.pm:388 interactive/gtk.pm:457
 #, c-format
 msgid "Add"
 msgstr "Přidat"
 
-#: interactive.pm:388 interactive/gtk.pm:453
+#: interactive.pm:388 interactive/gtk.pm:457
 #, c-format
 msgid "Modify"
 msgstr "Změnit"
@@ -3514,7 +3528,7 @@ msgstr "Adresář neexistuje"
 msgid "No such file"
 msgstr "Soubor neexistuje"
 
-#: interactive/gtk.pm:592
+#: interactive/gtk.pm:596
 #, c-format
 msgid "Beware, Caps Lock is enabled"
 msgstr "Pozor, jsou povolena velká písmena"
@@ -4801,17 +4815,17 @@ msgstr "Vítá vás %s"
 msgid "Moving used physical extents to other physical volumes failed"
 msgstr "Přesunutí používaných fyzických oblastí na jiné svazky selhalo"
 
-#: lvm.pm:149
+#: lvm.pm:152
 #, c-format
 msgid "Physical volume %s is still in use"
 msgstr "Fyzický svazek %s se stále používá"
 
-#: lvm.pm:159
+#: lvm.pm:162
 #, c-format
 msgid "Remove the logical volumes first\n"
 msgstr "Odeberte nejdříve logické disky\n"
 
-#: lvm.pm:202
+#: lvm.pm:205
 #, c-format
 msgid "The bootloader can't handle /boot on multiple physical volumes"
 msgstr "Zavaděč neumí pracovat s adresářem /boot na více fyzických svazcích"
@@ -5225,13 +5239,13 @@ msgstr "Chcete opravdu smazat tento mount point?"
 msgid "Password is trivial to guess"
 msgstr "Heslo je jednoduché na uhodnutí"
 
-#: mygtk2.pm:1542
+#: mygtk2.pm:1565
 #, c-format
 msgid "Password should be resistant to basic attacks"
 msgstr ""
 "Heslo by mělo odolat alespoň těm nejzákladnějším kryptografickým útokům"
 
-#: mygtk2.pm:1543 mygtk2.pm:1544
+#: mygtk2.pm:1566 mygtk2.pm:1567
 #, c-format
 msgid "Password seems secure"
 msgstr "Heslo se zdá být bezpečné"
@@ -5467,8 +5481,8 @@ msgid ""
 "\n"
 "- none if set to \"None\".\n"
 "\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
+"To authorize the services you need, use /etc/hosts.allow (see hosts."
+"allow(5))."
 msgstr ""
 "Autorizace:\n"
 "\n"
@@ -6625,7 +6639,7 @@ msgstr "Vzdálená administrace"
 msgid "Database Server"
 msgstr "Databázové servery"
 
-#: services.pm:188 services.pm:227
+#: services.pm:188 services.pm:225
 #, c-format
 msgid "Services"
 msgstr "Služby"
@@ -6640,22 +6654,22 @@ msgstr "Zvolte si, které služby by měly být automaticky spuštěny při star
 msgid "%d activated for %d registered"
 msgstr "aktivováno %d z %d registrovaných"
 
-#: services.pm:243
+#: services.pm:241
 #, c-format
 msgid "running"
 msgstr "spuštěno"
 
-#: services.pm:243
+#: services.pm:241
 #, c-format
 msgid "stopped"
 msgstr "zastaveno"
 
-#: services.pm:248
+#: services.pm:246
 #, c-format
 msgid "Services and daemons"
 msgstr "Služby a démoni"
 
-#: services.pm:254
+#: services.pm:252
 #, c-format
 msgid ""
 "No additional information\n"
@@ -6664,27 +6678,27 @@ msgstr ""
 "Nejsou žádné další\n"
 "informace o službě, promiňte."
 
-#: services.pm:259 ugtk2.pm:924
+#: services.pm:257 ugtk2.pm:924
 #, c-format
 msgid "Info"
 msgstr "Informace"
 
-#: services.pm:262
+#: services.pm:260
 #, c-format
 msgid "Start when requested"
 msgstr "Spustit na žádost"
 
-#: services.pm:262
+#: services.pm:260
 #, c-format
 msgid "On boot"
 msgstr "Při spuštění"
 
-#: services.pm:280
+#: services.pm:278
 #, c-format
 msgid "Start"
 msgstr "Start"
 
-#: services.pm:280
+#: services.pm:278
 #, c-format
 msgid "Stop"
 msgstr "Stop"
@@ -7022,6 +7036,53 @@ msgid "Installation failed"
 msgstr "Instalace selhala"
 
 #~ msgid ""
+#~ "The classic bug sound tester is to run the following commands:\n"
+#~ "\n"
+#~ "\n"
+#~ "- \"lspcidrake -v | fgrep -i AUDIO\" will tell you which driver your card "
+#~ "uses\n"
+#~ "by default\n"
+#~ "\n"
+#~ "- \"grep sound-slot /etc/modprobe.conf\" will tell you what driver it\n"
+#~ "currently uses\n"
+#~ "\n"
+#~ "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+#~ "loaded or not\n"
+#~ "\n"
+#~ "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" "
+#~ "will\n"
+#~ "tell you if sound and alsa services are configured to be run on\n"
+#~ "initlevel 3\n"
+#~ "\n"
+#~ "- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+#~ "\n"
+#~ "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound "
+#~ "card.\n"
+#~ msgstr ""
+#~ "Klasický postup při řešení problémů se zvukem je pomocí těchto příkazů:\n"
+#~ "\n"
+#~ "\n"
+#~ "- \"lspcidrake -v | fgrep -i AUDIO\" vám řekne, jaký ovladač je výchozí "
+#~ "pro\n"
+#~ "danou zvukovou kartu\n"
+#~ "\n"
+#~ "- \"grep sound-slot /etc/modprobe.conf\" vám řekne, který ovladač se "
+#~ "nyní\n"
+#~ "používá\n"
+#~ "\n"
+#~ "- \"/sbin/lsmod\" provede kontrolu toho, zda modul (ovladač) je nahrán "
+#~ "nebo ne\n"
+#~ "\n"
+#~ "- \"/sbin/chkconfig --list sound\" a \"/sbin/chkconfig --list alsa\" vám "
+#~ "sdělí\n"
+#~ "zda je pro initlevel nastaveny služby alsa a sound\n"
+#~ "\n"
+#~ "- \"aumix -q\" vám řekne, zda je zvuk ztlumen nebo ne\n"
+#~ "\n"
+#~ "- \"/sbin/fuser -v /dev/dsp\" vám řekne, který program používá zvukovou "
+#~ "kartu.\n"
+
+#~ msgid ""
 #~ "Launch packet filtering for Linux kernel 2.2 series, to set\n"
 #~ "up a firewall to protect your machine from network attacks."
 #~ msgstr ""