removed obsolete old unused strings, to make the po files lighter

1 files changed, 567 insertions, 572 deletions

diff --git a/perl-install/share/po/cs.po b/perl-install/share/po/cs.po
index 8b9bcb25c..dc2a4f796 100644
--- a/perl-install/share/po/cs.po
+++ b/perl-install/share/po/cs.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2002-09-12 13:54+0200\n"
+"POT-Creation-Date: 2002-09-13 22:00+0200\n"
 "PO-Revision-Date: 2002-09-12 18:18GMT\n"
 "Last-Translator: Michal Bukovjan <bukm@centrum.cz>\n"
 "Language-Team: Czech <cs@li.org>\n"
@@ -193,8 +193,8 @@ msgid "Ok"
 msgstr "Ok"
 
 #: ../../Xconfig/main.pm_.c:122 ../../diskdrake/dav.pm_.c:28
-#: ../../harddrake/ui.pm_.c:96 ../../printerdrake.pm_.c:3184
-#: ../../standalone/draksplash_.c:122 ../../standalone/logdrake_.c:224
+#: ../../harddrake/ui.pm_.c:96 ../../printerdrake.pm_.c:3203
+#: ../../standalone/draksplash_.c:122 ../../standalone/logdrake_.c:225
 msgid "Quit"
 msgstr "Konec"
 
@@ -303,7 +303,7 @@ msgstr "Grafická karta: %s"
 #: ../../interactive/http.pm_.c:105 ../../interactive/newt.pm_.c:195
 #: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143
 #: ../../my_gtk.pm_.c:158 ../../my_gtk.pm_.c:162 ../../my_gtk.pm_.c:287
-#: ../../network/netconnect.pm_.c:42 ../../printerdrake.pm_.c:2150
+#: ../../network/netconnect.pm_.c:42 ../../printerdrake.pm_.c:2169
 #: ../../security/main.pm_.c:295 ../../standalone/drakautoinst_.c:203
 #: ../../standalone/drakbackup_.c:3928 ../../standalone/drakbackup_.c:3961
 #: ../../standalone/drakbackup_.c:3987 ../../standalone/drakbackup_.c:4014
@@ -312,8 +312,8 @@ msgstr "Grafická karta: %s"
 #: ../../standalone/drakbackup_.c:4184 ../../standalone/drakconnect_.c:115
 #: ../../standalone/drakconnect_.c:147 ../../standalone/drakconnect_.c:289
 #: ../../standalone/drakconnect_.c:537 ../../standalone/drakconnect_.c:679
-#: ../../standalone/drakfloppy_.c:234 ../../standalone/drakfont_.c:970
-#: ../../standalone/drakgw_.c:532 ../../standalone/logdrake_.c:224
+#: ../../standalone/drakfloppy_.c:235 ../../standalone/drakfont_.c:970
+#: ../../standalone/drakgw_.c:532 ../../standalone/logdrake_.c:225
 #: ../../ugtk.pm_.c:296
 msgid "Cancel"
 msgstr "Zrušit"
@@ -506,7 +506,7 @@ msgstr "Prodleva před automatickým spuštěním"
 #: ../../any.pm_.c:170 ../../any.pm_.c:789
 #: ../../diskdrake/smbnfs_gtk.pm_.c:179
 #: ../../install_steps_interactive.pm_.c:1094 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:850 ../../printerdrake.pm_.c:965
+#: ../../printerdrake.pm_.c:865 ../../printerdrake.pm_.c:980
 #: ../../standalone/drakbackup_.c:3530 ../../standalone/drakconnect_.c:624
 #: ../../standalone/drakconnect_.c:649
 msgid "Password"
@@ -614,7 +614,7 @@ msgstr "Přidat"
 #: ../../any.pm_.c:258 ../../any.pm_.c:777 ../../diskdrake/dav.pm_.c:68
 #: ../../diskdrake/hd_gtk.pm_.c:153 ../../diskdrake/removable.pm_.c:27
 #: ../../diskdrake/smbnfs_gtk.pm_.c:88 ../../interactive/http.pm_.c:153
-#: ../../printerdrake.pm_.c:3184 ../../standalone/drakbackup_.c:2774
+#: ../../printerdrake.pm_.c:3203 ../../standalone/drakbackup_.c:2774
 msgid "Done"
 msgstr "Hotovo"
 
@@ -884,8 +884,8 @@ msgstr "Vytvořit uživatele"
 msgid "Real name"
 msgstr "Skutečné jméno"
 
-#: ../../any.pm_.c:788 ../../printerdrake.pm_.c:849
-#: ../../printerdrake.pm_.c:964
+#: ../../any.pm_.c:788 ../../printerdrake.pm_.c:864
+#: ../../printerdrake.pm_.c:979
 msgid "User name"
 msgstr "Uživatelské jméno"
 
@@ -942,7 +942,7 @@ msgstr "Povolit všem uživatelům"
 msgid "No sharing"
 msgstr "Nesdílet"
 
-#: ../../any.pm_.c:988 ../../install_any.pm_.c:1198 ../../standalone.pm_.c:58
+#: ../../any.pm_.c:988 ../../install_any.pm_.c:1199 ../../standalone.pm_.c:59
 #, c-format
 msgid "The package %s needs to be installed. Do you want to install it?"
 msgstr "Balíček %s musí být nainstalován. Chcete ho nainstalovat?"
@@ -954,7 +954,7 @@ msgstr ""
 "Nyní lze provést export přes protokol NFS nebo Samba. Vyberte prosím, který "
 "chcete použít."
 
-#: ../../any.pm_.c:999 ../../install_any.pm_.c:1203 ../../standalone.pm_.c:63
+#: ../../any.pm_.c:999 ../../install_any.pm_.c:1204 ../../standalone.pm_.c:64
 #, c-format
 msgid "Mandatory package %s is missing"
 msgstr "Chybí potřebný balíček %s"
@@ -1214,18 +1214,18 @@ msgid "Boot Style Configuration"
 msgstr "Nastavení stylu zavádění"
 
 #: ../../bootlook.pm_.c:79 ../../harddrake/ui.pm_.c:62
-#: ../../harddrake/ui.pm_.c:63 ../../standalone/drakfloppy_.c:81
-#: ../../standalone/logdrake_.c:101
+#: ../../harddrake/ui.pm_.c:63 ../../standalone/drakfloppy_.c:82
+#: ../../standalone/logdrake_.c:102
 msgid "/_File"
 msgstr "/_Soubor"
 
-#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:82
-#: ../../standalone/logdrake_.c:107
+#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83
+#: ../../standalone/logdrake_.c:108
 msgid "/File/_Quit"
 msgstr "/Soubor/U_končit"
 
 #: ../../bootlook.pm_.c:80 ../../harddrake/ui.pm_.c:63
-#: ../../standalone/drakfloppy_.c:82 ../../standalone/logdrake_.c:107
+#: ../../standalone/drakfloppy_.c:83 ../../standalone/logdrake_.c:108
 msgid "<control>Q"
 msgstr "<control>K"
 
@@ -2043,7 +2043,7 @@ msgstr "Volby pro připojení"
 msgid "Various"
 msgstr "Další"
 
-#: ../../diskdrake/interactive.pm_.c:917 ../../standalone/drakfloppy_.c:103
+#: ../../diskdrake/interactive.pm_.c:917 ../../standalone/drakfloppy_.c:104
 msgid "device"
 msgstr "zařízení"
 
@@ -2676,7 +2676,7 @@ msgstr "Třída médií"
 msgid "class of hardware device"
 msgstr "třída hardwarového zařízení"
 
-#: ../../harddrake/ui.pm_.c:23 ../../printerdrake.pm_.c:1543
+#: ../../harddrake/ui.pm_.c:23 ../../printerdrake.pm_.c:1562
 msgid "Description"
 msgstr "Popis"
 
@@ -2749,7 +2749,7 @@ msgstr "/_Konec"
 
 #: ../../harddrake/ui.pm_.c:64 ../../harddrake/ui.pm_.c:65
 #: ../../harddrake/ui.pm_.c:71 ../../harddrake/ui.pm_.c:73
-#: ../../standalone/logdrake_.c:110
+#: ../../standalone/logdrake_.c:111
 msgid "/_Help"
 msgstr "/_Nápověda"
 
@@ -2899,30 +2899,37 @@ msgstr "Zapnout podporu rádia"
 msgid ""
 "GNU/Linux is a multiuser system, and this means that each user can have his\n"
 "own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you add here will not be entitled to change anything except their own files\n"
-"and their own configuration. You will have to create at least one regular\n"
-"user for yourself. That account is where you should log in for routine use.\n"
-"Although it is very practical to log in as \"root\" everyday, it may also\n"
-"be very dangerous! The slightest mistake could mean that your system would\n"
-"not work any more. If you make a serious mistake as a regular user, you may\n"
-"only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
+"to learn more this concept. But unlike \"root\", which is the\n"
+"administrator, the users you add here will not be entitled to change\n"
+"anything except their own files and their own configurations. You will have\n"
+"to create at least one regular user for yourself. That account is where you\n"
+"should log in for routine use. Although it is very practical to log in as\n"
+"\"root\" everyday, it may also be very dangerous! The slightest mistake\n"
+"could mean that your system would not work any more. If you make a serious\n"
+"mistake as a regular user, you may only lose some information, but not the\n"
+"entire system.\n"
+"\n"
+"First, you have to enter your real name. This is not mandatory, of course\n"
+"-- as you can actually enter whatever you want. DrakX will then take the\n"
+"first word you have entered in the box and will bring it over to the \"User\n"
 "name\". This is the name this particular user will use to log onto the\n"
 "system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as the \"root\"'\n"
+"non-privileged (regular) user's password is not as crucial as the \"root\"\n"
 "one from a security point of view, but that is no reason to neglect it:\n"
 "after all, your files are at risk.\n"
 "\n"
 "If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
+"a user for each one of the people meant to use that computer. When you are\n"
+"finish adding all the users you want, select \"Done\".\n"
 "\n"
 "Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
+"for that user (bash by default).\n"
+"\n"
+"When you are finished adding all users, you will be proposed to choose a\n"
+"user which can automatically log into the system when the computer boots\n"
+"up. If you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"Yes\".\n"
+"If you are not interested in this feature, click \"No\"."
 msgstr ""
 "GNU/Linux je víceuživatelský systém, což znamená, že každý uživatel může\n"
 "mít své vlastní nastavení, soubory atd. Více se dočtete v \"Příručce "
@@ -2957,14 +2964,14 @@ msgstr ""
 "který\n"
 "bude uživatel používat (výchozí je bash)."
 
-#: ../../help.pm_.c:41
+#: ../../help.pm_.c:48
 msgid ""
 "Listed above are the existing Linux partitions detected on your hard drive.\n"
 "You can keep the choices made by the wizard, they are good for most common\n"
 "installations. If you make any changes, you must at least define a root\n"
 "partition (\"/\"). Do not choose too small a partition or you will not be\n"
 "able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
 "(only possible if you have more than one Linux partition available).\n"
 "\n"
 "Each partition is listed as follows: \"Name\", \"Capacity\".\n"
@@ -3011,7 +3018,7 @@ msgstr ""
 "Pro SCSI disky platí, že \"a\" je \"nejmenší SCSI ID\", \"b\" je \"druhé\n"
 "nejmenší SCSI ID\" atd."
 
-#: ../../help.pm_.c:72
+#: ../../help.pm_.c:79
 msgid ""
 "The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
 "knows if a selected package is located on another CD-ROM and will eject the\n"
@@ -3022,7 +3029,7 @@ msgstr ""
 "vyžádá\n"
 "si výměnu CD za jiné."
 
-#: ../../help.pm_.c:77
+#: ../../help.pm_.c:84
 msgid ""
 "It is now time to specify which programs you wish to install on your\n"
 "system. There are thousands of packages available for Mandrake Linux, and\n"
@@ -3055,7 +3062,7 @@ msgid ""
 "installation (by opposition to an upgrade), a dialog will pop up proposing\n"
 "different options for a minimal installation:\n"
 "\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
+" * \"With X\": install the fewest packages possible to have a working\n"
 "graphical desktop;\n"
 "\n"
 " * \"With basic documentation\": installs the base system plus basic\n"
@@ -3071,8 +3078,8 @@ msgid ""
 "total control over what will be installed.\n"
 "\n"
 "If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
+"groups to avoid installing any new package. This is useful to repair or\n"
+"update an existing system."
 msgstr ""
 "V této chvíli je možné vybrat, které programy chcete nainstalovat na váš "
 "systém.\n"
@@ -3123,7 +3130,7 @@ msgstr ""
 "daných skupin, čímž zabráníte instalaci nových balíčků. To je užitečné\n"
 "pro případ opravy nebo aktualizace existujícího systému."
 
-#: ../../help.pm_.c:128
+#: ../../help.pm_.c:135
 msgid ""
 "Finally, depending on whether or not you chose to be able to select\n"
 "individual packages, you will be presented a tree containing all packages\n"
@@ -3134,9 +3141,9 @@ msgid ""
 "right. When your selection is finished, click the \"Install\" button which\n"
 "will then launch the installation process. Depending on the speed of your\n"
 "hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
+"a while to complete the process. An installation time estimate is displayed\n"
+"on the screen, to help you gauge if there is sufficient time to enjoy a cup\n"
+"of coffee.\n"
 "\n"
 "!! If a server package has been selected, either intentionally or because\n"
 "it was part of a whole group, you will be asked to confirm that you really\n"
@@ -3157,8 +3164,8 @@ msgid ""
 "The tiny floppy disk icon at the bottom of the list allows to load the\n"
 "package list chosen during a previous installation. Clicking on this icon\n"
 "will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
+"another installation. See the second tip of the previous step on how to\n"
+"create such a floppy disk."
 msgstr ""
 "V závislosti na tom, zda jste zvolili individuální výběr balíčků, se "
 "nabídne\n"
@@ -3197,12 +3204,12 @@ msgstr ""
 "si\n"
 "tuto disketu vytvořit."
 
-#: ../../help.pm_.c:164
+#: ../../help.pm_.c:171
 msgid ""
 "You are now able to set up your Internet/network connection. If you wish to\n"
 "connect your computer to the Internet or to a local network, click \"OK\".\n"
 "The autodetection of network devices and modem will be launched. If this\n"
-"detection fails, uncheck the \"Use auto detection\" box next time. You may\n"
+"detection fails, uncheck the \"Use auto-detection\" box next time. You may\n"
 "also choose not to configure the network, or do it later; in that case,\n"
 "simply click the \"Cancel\" button.\n"
 "\n"
@@ -3213,8 +3220,8 @@ msgid ""
 "all the parameters from your Internet Service Provider or system\n"
 "administrator.\n"
 "\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
+"You can consult the ``Starter Guide'' chapter about Internet connections\n"
+"for details about the configuration, or simply wait until your system is\n"
 "installed and use the program described there to configure your connection.\n"
 "\n"
 "If you wish to configure the network later after installation, or if you\n"
@@ -3246,13 +3253,13 @@ msgstr ""
 "nastavit\n"
 "připojení k síti později po instalaci, klepněte na tlačítko \"Zrušit\"."
 
-#: ../../help.pm_.c:186
+#: ../../help.pm_.c:193
 msgid ""
 "You may now choose which services you wish to start at boot time.\n"
 "\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
+"Here are listed all the services available with the current installation.\n"
+"Review them carefully and uncheck those which are not always needed at boot\n"
+"time.\n"
 "\n"
 "You can get a short explanatory text about a service by selecting a\n"
 "specific service. However, if you are not sure whether a service is useful\n"
@@ -3279,7 +3286,7 @@ msgstr ""
 "je spuštěno, tím je větší nebezpečí nežádoucího proniknutí do počítače.\n"
 "Takže povolte opravdu jen ty služby, které nezbytně potřebujete."
 
-#: ../../help.pm_.c:203
+#: ../../help.pm_.c:210
 msgid ""
 "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
 "local time according to the time zone you selected. It is however possible\n"
@@ -3310,16 +3317,16 @@ msgstr ""
 "připojení k Internetu. Na počítač se také nainstaluje časový server, který\n"
 "mohou volitelně používat jiné počítače ve vaší lokální síti."
 
-#: ../../help.pm_.c:217
+#: ../../help.pm_.c:224
 msgid ""
 "X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
 "on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely.\n"
 "\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
+"You will be presented the list of available resolutions and color depth\n"
+"available for your hardware. Choose the one that best suit your needs (you\n"
+"will be able to change that after installation though). When you are\n"
+"satisfied with the sample shown in the monitor, click \"OK\". A window will\n"
 "then appear and ask you if you can see it.\n"
 "\n"
 "If you are doing an \"Expert\" installation, you will enter the X\n"
@@ -3329,7 +3336,7 @@ msgid ""
 "If you can see the message during the test, and answer \"Yes\", then DrakX\n"
 "will proceed to the next step. If you cannot see the message, it simply\n"
 "means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen. Refer then to the Video\n"
+"after 10 seconds, restoring the screen. Refer then to the video\n"
 "configuration section of the user guide for more information on how to\n"
 "configure your display."
 msgstr ""
@@ -3362,7 +3369,7 @@ msgstr ""
 "videa\" vaší\n"
 "uživatelské příručky."
 
-#: ../../help.pm_.c:239
+#: ../../help.pm_.c:246
 msgid ""
 "Finally, you will be asked whether you want to see the graphical interface\n"
 "at boot. Note this question will be asked even if you chose not to test the\n"
@@ -3376,19 +3383,19 @@ msgstr ""
 "jako server nebo v případě, že se nepodařilo správně nastavit grafickou "
 "kartu."
 
-#: ../../help.pm_.c:246
+#: ../../help.pm_.c:253
 msgid ""
 "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
 "booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
 "at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
 "should come back to this step for help in at least two situations:\n"
 "\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
+" * when installing the bootloader, DrakX will rewrite the boot sector (\n"
+"MBR) of your main disk (unless you are using another boot manager), to\n"
+"allow you to start up with either Windows or GNU/Linux (assuming you have\n"
+"Windows in your system). If you need to reinstall Windows, the Microsoft\n"
+"install process will rewrite the boot sector, and then you will not be able\n"
+"to start GNU/Linux!\n"
 "\n"
 " * if a problem arises and you cannot start up GNU/Linux from the hard\n"
 "disk, this floppy disk will be the only means of starting up GNU/Linux. It\n"
@@ -3426,14 +3433,13 @@ msgstr ""
 "být prázdná, nebo na ní mohou být data, která již nepotřebujete. Disketa\n"
 "nemusí být formátována, aplikace DrakX přepíše celý její obsah."
 
-#: ../../help.pm_.c:270
+#: ../../help.pm_.c:277
 msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
+"You now need to choose where you want to install the Mandrake Linux\n"
+"operating system on your hard drive. If your hard drive is empty or if an\n"
+"existing operating system is using all the available space, you will need\n"
+"to partition it. Basically, partitioning a hard drive consists of logically\n"
+"dividing it to create space to install your new Mandrake Linux system.\n"
 "\n"
 "Because the partitioning process' effects are usually irreversible,\n"
 "partitioning can be intimidating and stressful if you are an inexperienced\n"
@@ -3442,9 +3448,9 @@ msgid ""
 "\n"
 "If you are running the installation in Expert mode, you will enter\n"
 "DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
+"fine-tune your partitions. See the DiskDrake section in the ``Starter\n"
+"Guide''. From the installation interface, you can use the wizards as\n"
+"described here by clicking the dialog's \"Wizard\" button.\n"
 "\n"
 "If partitions have already been defined, either from a previous\n"
 "installation or from another partitioning tool, simply select those to\n"
@@ -3452,7 +3458,7 @@ msgid ""
 "\n"
 "If partitions are not defined, you will need to create them using the\n"
 "wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
+"available.\n"
 "\n"
 " * \"Use free space\": this option will simply lead to an automatic\n"
 "partitioning of your blank drive(s). You will not be prompted further;\n"
@@ -3463,9 +3469,9 @@ msgid ""
 "each of the partitions. The legacy mount points are selected by default,\n"
 "and you should generally keep them.\n"
 "\n"
-" * \"Use the free space on the Windows; partition\": if Microsoft Windows\n"
-"is installed on your hard drive and takes all the space available on it,\n"
-"you have to create free space for Linux data. To do so, you can delete your\n"
+" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
+"installed on your hard drive and takes all the space available on it, you\n"
+"have to create free space for Linux data. To do so, you can delete your\n"
 "Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n"
 "mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n"
 "be performed without the loss of any data, provided you previously\n"
@@ -3492,10 +3498,10 @@ msgid ""
 "   !! If you choose this option, all data on your disk will be lost. !!\n"
 "\n"
 " * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
+"your hard drive. Be careful -- it is a powerful but dangerous option. You\n"
 "can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing. To know how do use the DiskDrake utility used\n"
-"here, refer to the section ``Managing Your Partitions'' of the ````User\n"
+"know what you are doing. To know how to use the DiskDrake utility used\n"
+"here, refer to the section ``Managing Your Partitions'' of the ````Starter\n"
 "Guide''''"
 msgstr ""
 "V tomto bodě si musíte definovat, na které diskové oddíly budete\n"
@@ -3571,9 +3577,9 @@ msgstr ""
 "o nástroji DiskDrake, který se v tomto případě používá, prostudujte sekci "
 "\"Správa vašich oddílů\" v \"Uživatelské příručce\"."
 
-#: ../../help.pm_.c:341
+#: ../../help.pm_.c:347
 msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
+"There you are. Installation is now completed and your GNU/Linux system is\n"
 "ready to use. Just click \"OK\" to reboot the system. You can start\n"
 "GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
 "soon as the computer has booted up again.\n"
@@ -3637,10 +3643,10 @@ msgstr ""
 "(*) Potřebujete disketu formátovanou FAT (Pod Linuxem ji vytvoříte příkazem\n"
 "\"mformat a:\")"
 
-#: ../../help.pm_.c:372
+#: ../../help.pm_.c:378
 msgid ""
 "Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
+"(formatting means creating a filesystem on it).\n"
 "\n"
 "At this time, you may wish to reformat some already existing partitions to\n"
 "erase any data they contain. If you wish to do that, please select those\n"
@@ -3654,7 +3660,7 @@ msgid ""
 "\n"
 "Please be careful when selecting partitions. After formatting, all data on\n"
 "the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
+"it.\n"
 "\n"
 "Click on \"OK\" when you are ready to format partitions.\n"
 "\n"
@@ -3689,7 +3695,7 @@ msgstr ""
 "Kliknutím na \"Rozšířené\" můžete vybrat, které oddíly budou otestovány\n"
 "na vadné bloky."
 
-#: ../../help.pm_.c:398
+#: ../../help.pm_.c:404
 msgid ""
 "Your new Mandrake Linux operating system is currently being installed.\n"
 "Depending on the number of packages you will be installing and the speed of\n"
@@ -3704,7 +3710,7 @@ msgstr ""
 "\n"
 "Mějte prosím trpělivost a vyčkejte."
 
-#: ../../help.pm_.c:406
+#: ../../help.pm_.c:412
 msgid ""
 "At the time you are installing Mandrake Linux, it is likely that some\n"
 "packages have been updated since the initial release. Some bugs may have\n"
@@ -3734,13 +3740,13 @@ msgstr ""
 "stažení\n"
 "a instalace vybraných balíčků. Akci můžete přerušit klepnutím na \"Zrušit\"."
 
-#: ../../help.pm_.c:419
+#: ../../help.pm_.c:425
 msgid ""
 "Before continuing, you should read carefully the terms of the license. It\n"
 "covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
+"all the terms included in it, click on the \"Refuse\" button which will\n"
+"immediately terminate the installation. To continue with the installation,\n"
+"click on the \"Accept\" button."
 msgstr ""
 "Předtím, než budete pokračovat, přečtěte si pozorně podmínky licence. Ty\n"
 "se vztahují k celé distribuci Mandrake Linux a pokud s nimi nesouhlasíte,\n"
@@ -3748,7 +3754,7 @@ msgstr ""
 "pokračovat\n"
 "v instalaci, klikněte na tlačítko \"Potvrdit\"."
 
-#: ../../help.pm_.c:426
+#: ../../help.pm_.c:432
 msgid ""
 "At this point, it is time to choose the security level desired for the\n"
 "machine. As a rule of thumb, the more exposed the machine is, and the more\n"
@@ -3768,7 +3774,7 @@ msgstr ""
 "\n"
 "Pokud nevíte co vybrat, ponechte výchozí nastavení."
 
-#: ../../help.pm_.c:436
+#: ../../help.pm_.c:442
 msgid ""
 "At this point, you need to choose which partition(s) will be used for the\n"
 "installation of your Mandrake Linux system. If partitions have already been\n"
@@ -3786,16 +3792,16 @@ msgid ""
 "drive;\n"
 "\n"
 " * \"Auto allocate\": this option enables to automatically create ext3 and\n"
-"swap partitions in free space of your hard drive;\n"
+"swap partitions on your hard drive's free space;\n"
 "\n"
 "\"More\": gives access to additional features:\n"
 "\n"
 " * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
+"for later partition-table recovery, if necessary. It is strongly\n"
+"recommended to perform this step;\n"
 "\n"
 " * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
+"partition table from a floppy disk;\n"
 "\n"
 " * \"Rescue partition table\": if your partition table is damaged, you can\n"
 "try to recover it using this option. Please be careful and remember that it\n"
@@ -3911,7 +3917,7 @@ msgstr ""
 "pro\n"
 "uložení ramdisku a jádra pro situace záchrany disku."
 
-#: ../../help.pm_.c:507
+#: ../../help.pm_.c:513
 msgid ""
 "More than one Microsoft partition has been detected on your hard drive.\n"
 "Please choose the one you want to resize in order to install your new\n"
@@ -3974,47 +3980,45 @@ msgstr ""
 "\"Jméno pro Windows\" je písmeno, které je použito ve Windows\n"
 "(první oddíl nebo disk má písmeno \"C:\")."
 
-#: ../../help.pm_.c:538
+#: ../../help.pm_.c:544
 msgid "Please be patient. This operation can take several minutes."
 msgstr "Buďte trpěliví. Tato operace může trvat několik minut."
 
-#: ../../help.pm_.c:541
+#: ../../help.pm_.c:547
 msgid ""
 "DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
+"installation or if you want to have greater control (\"Expert\") over your\n"
+"installation. You can also choose to do a new installation or upgrade your\n"
+"existing Mandrake Linux system:\n"
 "\n"
-" * \"Install\": completely wipes out the old system, however, depending on\n"
+" * \"Install\": completely wipes out the old system. However, depending on\n"
 "what is currently installed on your machine, you may be able to keep some\n"
 "old partitions (Linux or otherwise) unchanged;\n"
 "\n"
 " * \"Upgrade\": this installation class allows to simply update the\n"
-"packages currently installed on your Mandrake Linux system. It keeps the\n"
-"current partitions of your hard drives as well as user configurations. All\n"
-"other configuration steps remain available, similar to a normal\n"
-"installation;\n"
+"packages currently installed on your Mandrake Linux system. It keeps your\n"
+"hard drives' current partitions as well as user configurations. All other\n"
+"configuration steps remain available, similar to a normal installation;\n"
 "\n"
 " * \"Upgrade Packages Only\": this new installation class allows you to\n"
 "upgrade an existing Mandrake Linux system while keeping all system\n"
 "configurations unchanged. Adding new packages to the current installation\n"
 "is also possible.\n"
 "\n"
-"Upgrades should work fine on Mandrake Linux systems containing version\n"
-"\"8.1\" or later.\n"
+"Upgrades should work fine on Mandrake Linux systems using version \"8.1\"\n"
+"or later.\n"
 "\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
+"Depending on your GNU/Linux knowledge, select one of the following choices:\n"
 "\n"
 " * Recommended: choose this if you have never installed a GNU/Linux\n"
 "operating system. The installation will be very easy and you will only be\n"
 "asked a few questions;\n"
 "\n"
-" * Expert: if you have a good understanding of GNU/Linux, you may wish to\n"
+" * Expert: if you have a good GNU/Linux understanding, you may wish to\n"
 "perform a highly customized installation. Some of the decisions you will\n"
-"have to make may be difficult if you do not have good knowledge of\n"
-"GNU/Linux, so it is not recommended that those without a fair amount of\n"
-"experience select this installation class."
+"have to make may be difficult if you do not have good GNU/Linux knowledge,\n"
+"so it is not recommended that those without a fair amount of experience\n"
+"select this installation class."
 msgstr ""
 "Nyní se instalační program zeptá na to, zda chcete provést (\"Doporučenou"
 "\")\n"
@@ -4051,7 +4055,7 @@ msgstr ""
 "ty, kteří nemají velmi dobré znalosti GNU/Linuxu.\n"
 "Nevolte tuto volbu, pokud nemáte dostatečné zkušenosti s instalací systému."
 
-#: ../../help.pm_.c:578
+#: ../../help.pm_.c:582
 msgid ""
 "Normally, DrakX selects the right keyboard for you (depending on the\n"
 "language you have chosen). However, you might not have a keyboard that\n"
@@ -4065,8 +4069,8 @@ msgid ""
 "supported keyboards.\n"
 "\n"
 "If you choose a keyboard layout based on a non-latin alphabet, you will be\n"
-"asked on next dialog to choose the key binding that will switch the\n"
-"keyboard layout between the latin and non latin layouts."
+"asked in the next dialog to choose the key binding that will switch the\n"
+"keyboard layout between the latin and non-latin layouts."
 msgstr ""
 "Normálně zvolí instalační program správnou klávesnici na základě zvoleného\n"
 "jazyka, takže není potřeba nic v tomto kroku měnit. \n"
@@ -4088,7 +4092,7 @@ msgstr ""
 "přepínat\n"
 "rozložení klávesnice mezi latinkou a vámi zvoleným rozložením."
 
-#: ../../help.pm_.c:594
+#: ../../help.pm_.c:598
 msgid ""
 "The first step is to choose your preferred language.\n"
 "\n"
@@ -4097,12 +4101,16 @@ msgid ""
 "Clicking on the \"Advanced\" button will allow you to select other\n"
 "languages to be installed on your workstation. Selecting other languages\n"
 "will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
+"applications. For example, if you host users from Spain on your machine,\n"
+"select English as the main language in the tree view and in the Advanced\n"
+"section, click on the box corresponding to \"Spanish|Spain\".\n"
 "\n"
 "Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
+"additional locales, click the \"OK\" button to continue.\n"
+"\n"
+"To switch from one language to the other, you can launch the\n"
+"\"/usr/sbin/localedrake\" command as \"root\" to change the whole system\n"
+"language, or as a simple user to only change that user's default language."
 msgstr ""
 "V prvním kroku si vyberete požadovaný jazyk.\n"
 "\n"
@@ -4122,14 +4130,14 @@ msgstr ""
 "\"OK\"\n"
 "a instalace bude pokračovat dalším krokem."
 
-#: ../../help.pm_.c:609
+#: ../../help.pm_.c:617
 msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
+"DrakX generally detects the number of buttons your mouse possesses. If not,\n"
+"it assumes you have a two-button mouse and will set it up for third-button\n"
 "emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
 "USB mouse.\n"
 "\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
+"If you wish to specify a different type of mouse, select the appropriate\n"
 "type from the provided list.\n"
 "\n"
 "If you choose a mouse other than the default, a test screen will be\n"
@@ -4137,12 +4145,12 @@ msgid ""
 "correct. If the mouse is not working well, press the space bar or [Return]\n"
 "to \"Cancel\" and choose again.\n"
 "\n"
-"Wheel mouses are sometimes not automatically detected. You will need to\n"
+"Sometimes, wheel mouses are not automatically detected. You will need to\n"
 "manually select it in the list. Be sure to select the one corresponding to\n"
 "the correct port it is attached to. After you have pressed the \"OK\"\n"
-"button, a mouse image is displayed. You then need to move the wheel of your\n"
-"mouse to activate it correctly. Then test all buttons and movements are\n"
-"correct."
+"button, a mouse image will be displayed. You then need to move the wheel of\n"
+"your mouse to activate it correctly. Then test that all buttons and\n"
+"movements are correct."
 msgstr ""
 "Aplikace DrakX obvykle zjistí počet tlačítek na vaší myši. Pokud ne, "
 "předpokládá,\n"
@@ -4169,7 +4177,7 @@ msgstr ""
 "myši.\n"
 "Poté ověřte, zda-li je správné nastavení tlačítek a pohybu vaší myši."
 
-#: ../../help.pm_.c:630
+#: ../../help.pm_.c:638
 msgid ""
 "Please select the correct port. For example, the \"COM1\" port under\n"
 "Windows is named \"ttyS0\" under GNU/Linux."
@@ -4177,23 +4185,23 @@ msgstr ""
 "Vyberte prosím správný port. Například \"COM1\" pod MS Windows se\n"
 "v Linuxu jmenuje \"ttyS0\"."
 
-#: ../../help.pm_.c:634
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
+#: ../../help.pm_.c:642
+msgid ""
+"This is the most crucial decision in regards with the security of your\n"
+"GNU/Linux system: you have to enter the \"root\" password. \"Root\" is the\n"
+"system administrator and is the only one authorized to make updates, add\n"
+"users, change the overall system configuration, and so on. In short,\n"
+"\"root\" can do everything! That is why you must choose a password that is\n"
+"difficult to guess -- DrakX will tell you if it is too easy. As you can\n"
+"see, you can choose not to enter a password, but we strongly advise you\n"
+"against this if only for one reason: do not think that because you booted\n"
+"GNU/Linux that your other operating systems are safe from mistakes. Since\n"
+"\"root\" can overcome all limitations and unintentionally erase all data on\n"
+"partitions by carelessly accessing the partitions themselves, it is\n"
+"important for it to be difficult to become \"root\".\n"
 "\n"
 "The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
+"characters long. Never write down the \"root\" password -- it makes it too\n"
 "easy to compromise a system.\n"
 "\n"
 "However, please do not make the password too long or complicated because\n"
@@ -4207,9 +4215,9 @@ msgid ""
 "In Expert mode, you will be asked if you will be connecting to an\n"
 "authentication server, like NIS or LDAP.\n"
 "\n"
-"If your network uses either of the LDAP, NIS, or PDC Windows Domain\n"
-"authentication services, select the appropriate one as \"authentication\".\n"
-"If you do not know, ask your network administrator.\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one as \"authentication\". If you have no\n"
+"clue, ask your network administrator.\n"
 "\n"
 "If your computer is not connected to any administrated network, you will\n"
 "want to choose \"Local files\" for authentication."
@@ -4256,11 +4264,11 @@ msgstr ""
 "Pokud není počítač připojen do žádné spravované sítě, zvolte pro ověření\n"
 "možnost \"Lokální soubory\"."
 
-#: ../../help.pm_.c:670
+#: ../../help.pm_.c:678
 msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
 "automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
+"accordingly, depending on what it finds there:\n"
 "\n"
 " * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
 "boot sector. Hence, you will be able to load either GNU/Linux or another\n"
@@ -4269,14 +4277,14 @@ msgid ""
 " * if a grub or LILO boot sector is found, it will replace it with a new\n"
 "one.\n"
 "\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
+"if in doubt, DrakX will display a dialog with various options.\n"
 "\n"
 " * \"Bootloader to use\": you have three choices:\n"
 "\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
+"    * \"GRUB\": if you prefer grub (text menu);\n"
 "\n"
 "    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
+"interface;\n"
 "\n"
 "    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
 "interface.\n"
@@ -4286,7 +4294,7 @@ msgid ""
 "second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
 "\n"
 " * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the bootloader menu,\n"
+"this is the delay granted to the user to choose -- in the bootloader menu,\n"
 "another boot entry than the default one.\n"
 "\n"
 "!! Beware that if you choose not to install a bootloader (by selecting\n"
@@ -4332,7 +4340,7 @@ msgstr ""
 "Kliknutím na tlačítko \"Rozšířené\" se dialog rozšíří o další možnosti,\n"
 "vyhrazené pro znalé uživatele."
 
-#: ../../help.pm_.c:710
+#: ../../help.pm_.c:718
 msgid ""
 "After you have configured the general bootloader parameters, the list of\n"
 "boot options which will be available at boot time will be displayed.\n"
@@ -4340,7 +4348,7 @@ msgid ""
 "If there is another operating system installed on your machine, it will\n"
 "automatically be added to the boot menu. Here, you can choose to fine-tune\n"
 "the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
+"remove it. \"Add\" creates a new entry. and \"Done\" goes on to the next\n"
 "installation step.\n"
 "\n"
 "You may also not want to give access to these other operating systems to\n"
@@ -4365,10 +4373,10 @@ msgstr ""
 "musíte mít spouštěcí disketu, ze které je možné tento operační systém "
 "spustit!"
 
-#: ../../help.pm_.c:724
+#: ../../help.pm_.c:732
 msgid ""
 "You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
+"GNU/Linux.\n"
 "\n"
 "Unless you know exactly what you are doing, choose \"First sector of drive\n"
 "(MBR)\"."
@@ -4379,34 +4387,26 @@ msgstr ""
 "\n"
 "Pokud přesně nevíte co zadat, ponechte \"První sektor na disku (MBR)\"."
 
-#: ../../help.pm_.c:731
+#: ../../help.pm_.c:739
 msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
+"Here, we select a printing system for your computer. Other OSes may offer\n"
+"you one, but Mandrake Linux offers two.\n"
 "\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have\n"
+" * \"pdq\" -- which means ``print, don't queue'', is the choice if you have\n"
 "a direct connection to your printer and you want to be able to panic out of\n"
 "printer jams, and you do not have networked printers. It will handle only\n"
 "very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
+"if this is your first voyage to GNU/Linux. You can change your choices\n"
 "after installation by running PrinterDrake from the Mandrake Control Center\n"
 "and clicking the expert button.\n"
 "\n"
-" * \"CUPS\" - ``Common Unix Printing System'', is excellent at printing to\n"
+" * \"CUPS\" -- ``Common Unix Printing System'', is excellent at printing to\n"
 "your local printer and also halfway-around the planet. It is simple and can\n"
 "act as a server or a client for the ancient \"lpd\" printing system. Hence,\n"
 "it is compatible with the systems that went before. It can do many tricks,\n"
 "but the basic setup is almost as easy as \"pdq\". If you need this to\n"
 "emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
+"graphical front-ends for printing or choosing printer options."
 msgstr ""
 "Zde si můžete vybrat tiskový systém, který budete používat. Jiné OS "
 "nabízejí\n"
@@ -4438,7 +4438,7 @@ msgstr ""
 
 #: ../../help.pm_.c:759
 msgid ""
-"DrakX now detects any IDE devices present in your computer. It will also\n"
+"DrakX now detects any IDE device present in your computer. It will also\n"
 "scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
 "found, DrakX will automatically install the appropriate driver.\n"
 "\n"
@@ -4448,7 +4448,7 @@ msgid ""
 "be presented with a list of SCSI cards to choose from. Click \"No\" if you\n"
 "have no SCSI hardware. If you are unsure, you can check the list of\n"
 "hardware detected in your machine by selecting \"See hardware info\" and\n"
-"clicking \"OK\". Examine the list of hardware and then click on the \"OK\"\n"
+"clicking \"OK\". Examine the hardware list and then click on the \"OK\"\n"
 "button to return to the SCSI interface question.\n"
 "\n"
 "If you have to manually specify your adapter, DrakX will ask if you want to\n"
@@ -4457,12 +4457,7 @@ msgid ""
 "usually works well.\n"
 "\n"
 "If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from Microsoft Windows (if you used this hardware with\n"
-"Windows on your system)."
+"will need to manually provide options to the driver."
 msgstr ""
 "Aplikace DrakX se nejdříve pokusí najít všechny pevné disky v počítači. Také "
 "se\n"
@@ -4496,12 +4491,12 @@ msgstr ""
 "Internetu),nebo ze systému Windows (pokud je máte na počítači a hardware v "
 "nich používáte)."
 
-#: ../../help.pm_.c:786
+#: ../../help.pm_.c:781
 msgid ""
 "You can add additional entries for yaboot, either for other operating\n"
 "systems, alternate kernels, or for an emergency boot image.\n"
 "\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
+"For other OSes, the entry consists only of a label and the \"root\"\n"
 "partition.\n"
 "\n"
 "For Linux, there are a few possible options:\n"
@@ -4532,7 +4527,7 @@ msgid ""
 "need to allocate a large ramdisk, this option can be used;\n"
 "\n"
 " * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
+"read-only, to allow a filesystem check before the system becomes ``live''.\n"
 "Here, you can override this option;\n"
 "\n"
 " * NoVideo: should the Apple video hardware prove to be exceptionally\n"
@@ -4591,7 +4586,7 @@ msgstr ""
 "pouze stisknout ENTER a spustí se. Tato položka je označena \"*\" a všechny\n"
 "výběry se zobrazí po stisknutí tlačítka [Tab]."
 
-#: ../../help.pm_.c:833
+#: ../../help.pm_.c:828
 msgid ""
 "Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
 "either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
@@ -4655,10 +4650,10 @@ msgstr ""
 "\n"
 " * Výchozí OS: vyberte výchozí OS, který se spustí po uplynutí prodlevy."
 
-#: ../../help.pm_.c:865
+#: ../../help.pm_.c:860
 msgid ""
 "Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
+"your installed hardware, you may (or may not), see the following entries:\n"
 "\n"
 " * \"Mouse\": check the current mouse configuration and click on the button\n"
 "to change it if necessary;\n"
@@ -4673,19 +4668,19 @@ msgid ""
 "order to configure the clock according to the time zone you are in;\n"
 "\n"
 " * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``User\n"
+"configuration wizard. Consult the correpsonding chapter of the ``Starter\n"
 "Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation;\n"
+"presented there is similar to the one used at installation time;\n"
 "\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
+" * \"Sound card\": if a sound card is detected on your system, it will be\n"
 "displayed here. No modification possible at installation time;\n"
 "\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
+" * \"TV card\": if a TV card is detected on your system, it will be\n"
+"displayed here. No modification possible at installation time;\n"
 "\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
+" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
 "displayed here. You can click on the button to change the parameters\n"
-"associated with it."
+"associated to it."
 msgstr ""
 "Zde jsou shromážděny různé informace, které se vztahují k tomuto počítači.\n"
 "V závislosti na tom, zda je či není přítomen daný hardware, můžete nebo\n"
@@ -4718,7 +4713,7 @@ msgstr ""
 " * \"ISDN karta\": pokud byla detekována ISDN karta, je zde zobrazena.\n"
 "Kliknutím na tlačítko můžete měnit parametry pro tuto kartu."
 
-#: ../../help.pm_.c:896
+#: ../../help.pm_.c:891
 msgid ""
 "Choose the hard drive you want to erase in order to install your new\n"
 "Mandrake Linux partition. Be careful, all data present on it will be lost\n"
@@ -4727,14 +4722,14 @@ msgstr ""
 "Vyberte disk, který chcete smazat pro instalaci Mandrake Linux.\n"
 "Pamatujte na to, že všechna data budou ztracena a nelze je již obnovit!"
 
-#: ../../help.pm_.c:901
+#: ../../help.pm_.c:896
 msgid ""
 "Click on \"OK\" if you want to delete all data and partitions present on\n"
 "this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
 "to recover any data and partitions present on this hard drive, including\n"
 "any Windows data.\n"
 "\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
+"Click on \"Cancel\" to stop this operation without losing any data and\n"
 "partitions present on this hard drive."
 msgstr ""
 "Klikněte na \"OK\", pokud chcete smazat všechna data a oddíly na tomto\n"
@@ -4762,7 +4757,7 @@ msgstr ""
 msgid "You must also format %s"
 msgstr "Musíte také naformátovat %s"
 
-#: ../../install_any.pm_.c:424
+#: ../../install_any.pm_.c:423
 #, c-format
 msgid ""
 "You have selected the following server(s): %s\n"
@@ -4787,7 +4782,7 @@ msgstr ""
 "\n"
 "Chcete opravdu nainstalovat tyto servery?\n"
 
-#: ../../install_any.pm_.c:442
+#: ../../install_any.pm_.c:441
 #, c-format
 msgid ""
 "The following packages will be removed to allow upgrading your system: %s\n"
@@ -4800,20 +4795,20 @@ msgstr ""
 "\n"
 "Opravdu chcete odebrat tyto balíčky?\n"
 
-#: ../../install_any.pm_.c:472
+#: ../../install_any.pm_.c:471
 msgid "Can't use broadcast with no NIS domain"
 msgstr "Nelze použít všesměrové vysílání bez NIS domény"
 
-#: ../../install_any.pm_.c:869
+#: ../../install_any.pm_.c:870
 #, c-format
 msgid "Insert a FAT formatted floppy in drive %s"
 msgstr "Vložte naformátovanou disketu do %s"
 
-#: ../../install_any.pm_.c:873
+#: ../../install_any.pm_.c:874
 msgid "This floppy is not FAT formatted"
 msgstr "Tato disketa není formátována"
 
-#: ../../install_any.pm_.c:885
+#: ../../install_any.pm_.c:886
 msgid ""
 "To use this saved packages selection, boot installation with ``linux "
 "defcfg=floppy''"
@@ -4821,12 +4816,12 @@ msgstr ""
 "Pokud chcete použít uložený výběr balíčků, spusťte instalaci takto: 'linux "
 "defcfg=floppy'"
 
-#: ../../install_any.pm_.c:908 ../../partition_table.pm_.c:767
+#: ../../install_any.pm_.c:909 ../../partition_table.pm_.c:767
 #, c-format
 msgid "Error reading file %s"
 msgstr "Chyba při čtení souboru %s"
 
-#: ../../install_any.pm_.c:1030
+#: ../../install_any.pm_.c:1031
 msgid ""
 "An error occurred - no valid devices were found on which to create new "
 "filesystems. Please check your hardware for the cause of this problem"
@@ -5070,7 +5065,7 @@ msgstr ""
 msgid "Welcome to %s"
 msgstr "Vítá vás %s"
 
-#: ../../install_steps.pm_.c:531 ../../install_steps.pm_.c:770
+#: ../../install_steps.pm_.c:542 ../../install_steps.pm_.c:781
 msgid "No floppy drive available"
 msgstr "Není dostupná žádná disketová mechanika"
 
@@ -6000,8 +5995,8 @@ msgstr "Myš"
 msgid "Timezone"
 msgstr "Časová zóna"
 
-#: ../../install_steps_interactive.pm_.c:1023 ../../printerdrake.pm_.c:2966
-#: ../../printerdrake.pm_.c:3055
+#: ../../install_steps_interactive.pm_.c:1023 ../../printerdrake.pm_.c:2985
+#: ../../printerdrake.pm_.c:3074
 msgid "Printer"
 msgstr "Tiskárna"
 
@@ -6057,7 +6052,7 @@ msgid "This password is too short (it must be at least %d characters long)"
 msgstr "Toto heslo je příliš jednoduché (musí být alespoň %d znaků dlouhé)"
 
 #: ../../install_steps_interactive.pm_.c:1097 ../../network/modem.pm_.c:49
-#: ../../standalone/drakconnect_.c:625 ../../standalone/logdrake_.c:172
+#: ../../standalone/drakconnect_.c:625 ../../standalone/logdrake_.c:173
 msgid "Authentication"
 msgstr "Ověření"
 
@@ -6163,7 +6158,7 @@ msgstr "první mechaniky"
 msgid "Second floppy drive"
 msgstr "druhé mechaniky"
 
-#: ../../install_steps_interactive.pm_.c:1179 ../../printerdrake.pm_.c:2496
+#: ../../install_steps_interactive.pm_.c:1179 ../../printerdrake.pm_.c:2515
 msgid "Skip"
 msgstr "Přeskočit"
 
@@ -6394,7 +6389,7 @@ msgid "Basic"
 msgstr "Základní"
 
 #: ../../interactive/newt.pm_.c:195 ../../my_gtk.pm_.c:158
-#: ../../printerdrake.pm_.c:2150
+#: ../../printerdrake.pm_.c:2169
 msgid "<- Previous"
 msgstr "<- Předchozí"
 
@@ -7002,7 +6997,7 @@ msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-2,*-r-*"
 msgid "Finish"
 msgstr "Ukončit"
 
-#: ../../my_gtk.pm_.c:159 ../../printerdrake.pm_.c:2152
+#: ../../my_gtk.pm_.c:159 ../../printerdrake.pm_.c:2171
 msgid "Next ->"
 msgstr "Další ->"
 
@@ -7478,13 +7473,13 @@ msgstr "Zvolte profil pro nastavení"
 msgid "Use auto detection"
 msgstr "Použít autodetekci"
 
-#: ../../network/netconnect.pm_.c:168 ../../printerdrake.pm_.c:3180
+#: ../../network/netconnect.pm_.c:168 ../../printerdrake.pm_.c:3199
 #: ../../standalone/drakconnect_.c:274 ../../standalone/drakconnect_.c:277
-#: ../../standalone/drakfloppy_.c:145
+#: ../../standalone/drakfloppy_.c:146
 msgid "Expert Mode"
 msgstr "Expertní režim"
 
-#: ../../network/netconnect.pm_.c:174 ../../printerdrake.pm_.c:386
+#: ../../network/netconnect.pm_.c:174 ../../printerdrake.pm_.c:399
 msgid "Detecting devices..."
 msgstr "Detekuji zařízení..."
 
@@ -7652,7 +7647,7 @@ msgstr "Automatická IP"
 msgid "Start at boot"
 msgstr "Spustit při startu"
 
-#: ../../network/network.pm_.c:333 ../../printerdrake.pm_.c:860
+#: ../../network/network.pm_.c:333 ../../printerdrake.pm_.c:875
 msgid "IP address should be in format 1.2.3.4"
 msgstr "IP adresa musí být ve formátu 1.2.3.4"
 
@@ -7907,7 +7902,7 @@ msgstr "LPD - Démon pro tiskárny"
 msgid "PDQ - Print, Don't Queue"
 msgstr "PDQ - Tisk bez ukládání do fronty"
 
-#: ../../printer.pm_.c:34 ../../printer.pm_.c:1134
+#: ../../printer.pm_.c:34 ../../printer.pm_.c:1144
 msgid "CUPS"
 msgstr "CUPS"
 
@@ -7935,7 +7930,7 @@ msgstr "Vzdálená tiskárna"
 msgid "Printer on remote CUPS server"
 msgstr "Tiskárna na vzdáleném CUPS serveru"
 
-#: ../../printer.pm_.c:52 ../../printerdrake.pm_.c:883
+#: ../../printer.pm_.c:52 ../../printerdrake.pm_.c:898
 msgid "Printer on remote lpd server"
 msgstr "Tiskárna na vzdálený lpd serveru"
 
@@ -7951,7 +7946,7 @@ msgstr "Tiskárna na serveru Windows 95/98/NT"
 msgid "Printer on NetWare server"
 msgstr "Tiskárna na Netware serveru"
 
-#: ../../printer.pm_.c:56 ../../printerdrake.pm_.c:887
+#: ../../printer.pm_.c:56 ../../printerdrake.pm_.c:902
 msgid "Enter a printer device URI"
 msgstr "Zadejte URI tiskového zařízení"
 
@@ -7959,102 +7954,102 @@ msgstr "Zadejte URI tiskového zařízení"
 msgid "Pipe job into a command"
 msgstr "Poslat tiskovou úlohu do příkazu"
 
-#: ../../printer.pm_.c:328 ../../printer.pm_.c:370 ../../printer.pm_.c:542
+#: ../../printer.pm_.c:328 ../../printer.pm_.c:370 ../../printer.pm_.c:552
 msgid "Unknown Model"
 msgstr "Neznámý model"
 
-#: ../../printer.pm_.c:744 ../../printer.pm_.c:935 ../../printer.pm_.c:1327
-#: ../../printerdrake.pm_.c:2286 ../../printerdrake.pm_.c:3443
+#: ../../printer.pm_.c:754 ../../printer.pm_.c:945 ../../printer.pm_.c:1337
+#: ../../printerdrake.pm_.c:2305 ../../printerdrake.pm_.c:3462
 msgid "Unknown model"
 msgstr "Neznámý model"
 
-#: ../../printer.pm_.c:772
+#: ../../printer.pm_.c:782
 msgid "Local Printers"
 msgstr "Místní tiskárny"
 
-#: ../../printer.pm_.c:774 ../../printer.pm_.c:1135
+#: ../../printer.pm_.c:784 ../../printer.pm_.c:1145
 msgid "Remote Printers"
 msgstr "Vzdálené tiskárny"
 
-#: ../../printer.pm_.c:781 ../../printerdrake.pm_.c:404
+#: ../../printer.pm_.c:791 ../../printerdrake.pm_.c:417
 #, c-format
 msgid " on parallel port \\/*%s"
 msgstr " na paralelním portu \\/*%s"
 
-#: ../../printer.pm_.c:784 ../../printerdrake.pm_.c:406
+#: ../../printer.pm_.c:794 ../../printerdrake.pm_.c:419
 #, c-format
 msgid ", USB printer \\/*%s"
 msgstr ", USB tiskárna \\/*%s"
 
-#: ../../printer.pm_.c:789
+#: ../../printer.pm_.c:799
 #, c-format
 msgid ", multi-function device on parallel port \\/*%s"
 msgstr ", multifunkční na paralelním portu \\/*%s"
 
-#: ../../printer.pm_.c:792
+#: ../../printer.pm_.c:802
 msgid ", multi-function device on USB"
 msgstr ", multifunkční zařízení na USB"
 
-#: ../../printer.pm_.c:794
+#: ../../printer.pm_.c:804
 msgid ", multi-function device on HP JetDirect"
 msgstr ", multifunkční zařízení na HP JetDirect"
 
-#: ../../printer.pm_.c:796
+#: ../../printer.pm_.c:806
 msgid ", multi-function device"
 msgstr ", multifunkční zařízení"
 
-#: ../../printer.pm_.c:799
+#: ../../printer.pm_.c:809
 #, c-format
 msgid ", printing to %s"
 msgstr ", při tisku na %s"
 
-#: ../../printer.pm_.c:801
+#: ../../printer.pm_.c:811
 #, c-format
 msgid " on LPD server \"%s\", printer \"%s\""
 msgstr " na serveru LPD \"%s\", tiskárna \"%s\""
 
-#: ../../printer.pm_.c:803
+#: ../../printer.pm_.c:813
 #, c-format
 msgid ", TCP/IP host \"%s\", port %s"
 msgstr ", TCP/IP hostitel \"%s\", port %s"
 
-#: ../../printer.pm_.c:807
+#: ../../printer.pm_.c:817
 #, c-format
 msgid " on SMB/Windows server \"%s\", share \"%s\""
 msgstr " na serveru SMB/Windows \"%s\", sdílená jako \"%s\""
 
-#: ../../printer.pm_.c:811
+#: ../../printer.pm_.c:821
 #, c-format
 msgid " on Novell server \"%s\", printer \"%s\""
 msgstr " na serveru Novell \"%s\", tiskárna \"%s\""
 
-#: ../../printer.pm_.c:813
+#: ../../printer.pm_.c:823
 #, c-format
 msgid ", using command %s"
 msgstr ", používá příkaz %s"
 
-#: ../../printer.pm_.c:932 ../../printerdrake.pm_.c:1682
+#: ../../printer.pm_.c:942 ../../printerdrake.pm_.c:1701
 msgid "Raw printer (No driver)"
 msgstr "Přímý tisk (bez ovladače)"
 
-#: ../../printer.pm_.c:1104
+#: ../../printer.pm_.c:1114
 #, c-format
 msgid "(on %s)"
 msgstr "(na %s)"
 
-#: ../../printer.pm_.c:1106
+#: ../../printer.pm_.c:1116
 msgid "(on this machine)"
 msgstr "(na tomto počítači)"
 
-#: ../../printer.pm_.c:1131
+#: ../../printer.pm_.c:1141
 #, c-format
 msgid "On CUPS server \"%s\""
 msgstr "Na serveru CUPS \"%s\""
 
-#: ../../printer.pm_.c:1137 ../../printerdrake.pm_.c:3100
-#: ../../printerdrake.pm_.c:3111 ../../printerdrake.pm_.c:3332
-#: ../../printerdrake.pm_.c:3384 ../../printerdrake.pm_.c:3410
-#: ../../printerdrake.pm_.c:3585 ../../printerdrake.pm_.c:3587
+#: ../../printer.pm_.c:1147 ../../printerdrake.pm_.c:3119
+#: ../../printerdrake.pm_.c:3130 ../../printerdrake.pm_.c:3351
+#: ../../printerdrake.pm_.c:3403 ../../printerdrake.pm_.c:3429
+#: ../../printerdrake.pm_.c:3604 ../../printerdrake.pm_.c:3606
 msgid " (Default)"
 msgstr " (Výchozí)"
 
@@ -8080,11 +8075,11 @@ msgstr ""
 msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
 msgstr "Autodetekce tiskárny (lokální, TCP/soket, a tiskárny SMB)"
 
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:3164
+#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:3183
 msgid "CUPS configuration"
 msgstr "Nastavení CUPS"
 
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:3165
+#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:3184
 msgid "Specify CUPS server"
 msgstr "Zadejte CUPS server"
 
@@ -8125,7 +8120,7 @@ msgstr ""
 msgid "The IP address should look like 192.168.1.20"
 msgstr "IP adresa musí být ve formátu 192.168.1.20"
 
-#: ../../printerdrake.pm_.c:95 ../../printerdrake.pm_.c:1094
+#: ../../printerdrake.pm_.c:95 ../../printerdrake.pm_.c:1109
 msgid "The port number should be an integer!"
 msgstr "Číslo portu musí být celé číslo!"
 
@@ -8133,7 +8128,7 @@ msgstr "Číslo portu musí být celé číslo!"
 msgid "CUPS server IP"
 msgstr "IP adresa CUPS serveru"
 
-#: ../../printerdrake.pm_.c:103 ../../printerdrake.pm_.c:1114
+#: ../../printerdrake.pm_.c:103 ../../printerdrake.pm_.c:1129
 msgid "Port"
 msgstr "Port"
 
@@ -8142,19 +8137,19 @@ msgid "Automatic CUPS configuration"
 msgstr "Automatické nastavení pro CUPS"
 
 #: ../../printerdrake.pm_.c:177 ../../printerdrake.pm_.c:247
-#: ../../printerdrake.pm_.c:1555 ../../printerdrake.pm_.c:1559
-#: ../../printerdrake.pm_.c:1677 ../../printerdrake.pm_.c:2229
-#: ../../printerdrake.pm_.c:2382 ../../printerdrake.pm_.c:2441
-#: ../../printerdrake.pm_.c:2514 ../../printerdrake.pm_.c:2535
-#: ../../printerdrake.pm_.c:2728 ../../printerdrake.pm_.c:2769
-#: ../../printerdrake.pm_.c:2774 ../../printerdrake.pm_.c:2808
-#: ../../printerdrake.pm_.c:2813 ../../printerdrake.pm_.c:2850
-#: ../../printerdrake.pm_.c:2903 ../../printerdrake.pm_.c:2923
-#: ../../printerdrake.pm_.c:2937 ../../printerdrake.pm_.c:2971
-#: ../../printerdrake.pm_.c:3017 ../../printerdrake.pm_.c:3035
-#: ../../printerdrake.pm_.c:3124 ../../printerdrake.pm_.c:3198
-#: ../../printerdrake.pm_.c:3500 ../../printerdrake.pm_.c:3555
-#: ../../printerdrake.pm_.c:3608 ../../standalone/printerdrake_.c:57
+#: ../../printerdrake.pm_.c:1574 ../../printerdrake.pm_.c:1578
+#: ../../printerdrake.pm_.c:1696 ../../printerdrake.pm_.c:2248
+#: ../../printerdrake.pm_.c:2401 ../../printerdrake.pm_.c:2460
+#: ../../printerdrake.pm_.c:2533 ../../printerdrake.pm_.c:2554
+#: ../../printerdrake.pm_.c:2747 ../../printerdrake.pm_.c:2788
+#: ../../printerdrake.pm_.c:2793 ../../printerdrake.pm_.c:2827
+#: ../../printerdrake.pm_.c:2832 ../../printerdrake.pm_.c:2869
+#: ../../printerdrake.pm_.c:2922 ../../printerdrake.pm_.c:2942
+#: ../../printerdrake.pm_.c:2956 ../../printerdrake.pm_.c:2990
+#: ../../printerdrake.pm_.c:3036 ../../printerdrake.pm_.c:3054
+#: ../../printerdrake.pm_.c:3143 ../../printerdrake.pm_.c:3217
+#: ../../printerdrake.pm_.c:3519 ../../printerdrake.pm_.c:3574
+#: ../../printerdrake.pm_.c:3627 ../../standalone/printerdrake_.c:57
 msgid "Printerdrake"
 msgstr "PrinterDrake"
 
@@ -8270,12 +8265,13 @@ msgstr ""
 "POZNÁMKA: V závislosti na modelu tiskárny a tiskovém systému je potřeba "
 "nainstalovat dalších %d MB potřebného software."
 
-#: ../../printerdrake.pm_.c:269 ../../printerdrake.pm_.c:278
-#: ../../printerdrake.pm_.c:3146 ../../printerdrake.pm_.c:3271
+#: ../../printerdrake.pm_.c:279 ../../printerdrake.pm_.c:291
+#: ../../printerdrake.pm_.c:361 ../../printerdrake.pm_.c:3165
+#: ../../printerdrake.pm_.c:3290
 msgid "Add a new printer"
 msgstr "Přidat novou tiskárnu"
 
-#: ../../printerdrake.pm_.c:270
+#: ../../printerdrake.pm_.c:280
 msgid ""
 "\n"
 "Welcome to the Printer Setup Wizard\n"
@@ -8296,7 +8292,7 @@ msgstr ""
 "Budete dotázáni na všechny potřebné informace pro nastavení tiskárny, můžete "
 "si vybrat se všech tiskových ovladačů a typů připojení tiskárny."
 
-#: ../../printerdrake.pm_.c:280
+#: ../../printerdrake.pm_.c:293
 msgid ""
 "\n"
 "Welcome to the Printer Setup Wizard\n"
@@ -8336,7 +8332,7 @@ msgstr ""
 "Pokud jste připraveni, klepněte na tlačítko \"Další\", nebo klepněte na "
 "tlačítko \"Zrušit\" pokud nechcete v tuto chvíli tiskárny nastavovat."
 
-#: ../../printerdrake.pm_.c:289 ../../printerdrake.pm_.c:306
+#: ../../printerdrake.pm_.c:302 ../../printerdrake.pm_.c:319
 msgid ""
 "\n"
 "Welcome to the Printer Setup Wizard\n"
@@ -8361,7 +8357,7 @@ msgstr ""
 "Pokud jste připraveni, klepněte na tlačítko \"Další\", nebo klepněte na "
 "tlačítko \"Zrušit\" pokud nechcete v tuto chvíli tiskárny nastavovat."
 
-#: ../../printerdrake.pm_.c:297
+#: ../../printerdrake.pm_.c:310
 msgid ""
 "\n"
 "Welcome to the Printer Setup Wizard\n"
@@ -8399,24 +8395,19 @@ msgstr ""
 "Pokud jste připraveni, klepněte na tlačítko \"Další\", nebo klepněte na "
 "tlačítko \"Zrušit\" pokud nechcete v tuto chvíli tiskárny nastavovat."
 
-#: ../../printerdrake.pm_.c:315
+#: ../../printerdrake.pm_.c:328
 msgid "Auto-detect printers connected to this machine"
 msgstr "Automaticky nalézt tiskárny připojené k tomuto počítači"
 
-#: ../../printerdrake.pm_.c:318
+#: ../../printerdrake.pm_.c:331
 msgid "Auto-detect printers connected directly to the local network"
 msgstr "Automaticky nalézt tiskárny připojené přímo k lokální síti"
 
-#: ../../printerdrake.pm_.c:321
+#: ../../printerdrake.pm_.c:334
 msgid "Auto-detect printers connected to machines running Microsoft Windows"
 msgstr "Automaticky nalézt tiskárny sdílené počítači s Microsoft Windows"
 
-#: ../../printerdrake.pm_.c:348 ../../printerdrake.pm_.c:562
-#: ../../printerdrake.pm_.c:587
-msgid "Local Printer"
-msgstr "Místní tiskárna"
-
-#: ../../printerdrake.pm_.c:349
+#: ../../printerdrake.pm_.c:362
 msgid ""
 "\n"
 "Congratulations, your printer is now installed and configured!\n"
@@ -8438,49 +8429,53 @@ msgstr ""
 "hodnoty (typ zásobníku, kvalita tisku,...), zvolte \"Tiskárna\" v sekci "
 "\"Hardware\" v řídícím centru Mandrake."
 
-#: ../../printerdrake.pm_.c:386 ../../printerdrake.pm_.c:577
-#: ../../printerdrake.pm_.c:790 ../../printerdrake.pm_.c:1030
+#: ../../printerdrake.pm_.c:399 ../../printerdrake.pm_.c:590
+#: ../../printerdrake.pm_.c:805 ../../printerdrake.pm_.c:1045
 msgid "Printer auto-detection"
 msgstr "Autodetekce tiskárny"
 
-#: ../../printerdrake.pm_.c:408
+#: ../../printerdrake.pm_.c:421
 #, c-format
 msgid ", network printer \"%s\", port %s"
 msgstr ", síťová tiskárna \"%s\", port %s"
 
-#: ../../printerdrake.pm_.c:410
+#: ../../printerdrake.pm_.c:423
 #, c-format
 msgid ", printer \"%s\" on SMB/Windows server \"%s\""
 msgstr ", tiskárna \"%s\" na serveru SMB/Windows \"%s\""
 
-#: ../../printerdrake.pm_.c:416
+#: ../../printerdrake.pm_.c:429
 #, c-format
 msgid "Detected %s"
 msgstr "Nalezeno %s"
 
-#: ../../printerdrake.pm_.c:420 ../../printerdrake.pm_.c:451
-#: ../../printerdrake.pm_.c:470
+#: ../../printerdrake.pm_.c:433 ../../printerdrake.pm_.c:464
+#: ../../printerdrake.pm_.c:483
 #, c-format
 msgid "Printer on parallel port \\/*%s"
 msgstr "Tiskárna na paralelním portu \\/*%s"
 
-#: ../../printerdrake.pm_.c:422 ../../printerdrake.pm_.c:453
-#: ../../printerdrake.pm_.c:475
+#: ../../printerdrake.pm_.c:435 ../../printerdrake.pm_.c:466
+#: ../../printerdrake.pm_.c:488
 #, c-format
 msgid "USB printer \\/*%s"
 msgstr "USB tiskárna \\/*%s"
 
-#: ../../printerdrake.pm_.c:424
+#: ../../printerdrake.pm_.c:437
 #, c-format
 msgid "Network printer \"%s\", port %s"
 msgstr "Síťová tiskárna \"%s\", port %s"
 
-#: ../../printerdrake.pm_.c:426
+#: ../../printerdrake.pm_.c:439
 #, c-format
 msgid "Printer \"%s\" on SMB/Windows server \"%s\""
 msgstr "Tiskárna \"%s\" na serveru Windows SMB/Windows \"%s\""
 
-#: ../../printerdrake.pm_.c:563
+#: ../../printerdrake.pm_.c:575 ../../printerdrake.pm_.c:600
+msgid "Local Printer"
+msgstr "Místní tiskárna"
+
+#: ../../printerdrake.pm_.c:576
 msgid ""
 "No local printer found! To manually install a printer enter a device name/"
 "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
@@ -8492,19 +8487,19 @@ msgstr ""
 "ekvivalentní LPT1:, LPT2:, ...,první USB tiskárna: /dev/usb/lp0, druhá USB "
 "tiskárna: /dev/usb/lp1,...)."
 
-#: ../../printerdrake.pm_.c:567
+#: ../../printerdrake.pm_.c:580
 msgid "You must enter a device or file name!"
 msgstr "Musíte zadat zařízení nebo název souboru!"
 
-#: ../../printerdrake.pm_.c:578
+#: ../../printerdrake.pm_.c:591
 msgid "No printer found!"
 msgstr "Nenalezena žádná tiskárna!"
 
-#: ../../printerdrake.pm_.c:588
+#: ../../printerdrake.pm_.c:601
 msgid "Available printers"
 msgstr "Tiskárny k dispozici"
 
-#: ../../printerdrake.pm_.c:592
+#: ../../printerdrake.pm_.c:605
 msgid ""
 "The following printer was auto-detected, if it is not the one you want to "
 "configure, enter a device name/file name in the input line"
@@ -8512,7 +8507,7 @@ msgstr ""
 "Tyto tiskárny byly automaticky detekovány, pokud není mezi nimi požadovaná "
 "tiskárna, zadejte do políčka název zařízení/název souboru"
 
-#: ../../printerdrake.pm_.c:593
+#: ../../printerdrake.pm_.c:606
 msgid ""
 "Here is a list of all auto-detected printers. Please choose the printer you "
 "want to set up or enter a device name/file name in the input line"
@@ -8520,7 +8515,7 @@ msgstr ""
 "Zde je seznam všech automaticky rozpoznaných tiskáren. Vyberte si tiskárnu, "
 "kterou chcete nastavit nebo zadejte do políčka název zařízení/název souboru"
 
-#: ../../printerdrake.pm_.c:595
+#: ../../printerdrake.pm_.c:608
 msgid ""
 "The following printer was auto-detected. The configuration of the printer "
 "will work fully automatically. If your printer was not correctly detected or "
@@ -8531,7 +8526,7 @@ msgstr ""
 "automatická. Pokud nebyla tiskárna správně detekována nebo preferujete "
 "vlastní nastavení tisku, zvolte \"Ruční konfigurace\"."
 
-#: ../../printerdrake.pm_.c:596
+#: ../../printerdrake.pm_.c:609
 msgid ""
 "Here is a list of all auto-detected printers. Please choose the printer you "
 "want to set up. The configuration of the printer will work fully "
@@ -8542,7 +8537,7 @@ msgstr ""
 "plně automatická. Pokud nebyla tiskárna správně detekována nebo preferujete "
 "vlastní nastavení tisku, zvolte \"Ruční konfigurace\"."
 
-#: ../../printerdrake.pm_.c:598
+#: ../../printerdrake.pm_.c:611
 msgid ""
 "Please choose the port where your printer is connected to or enter a device "
 "name/file name in the input line"
@@ -8550,11 +8545,11 @@ msgstr ""
 "Vyberte si port, ke kterému je tiskárna připojena nebo zadejte do políčka "
 "název zařízení/název souboru"
 
-#: ../../printerdrake.pm_.c:599
+#: ../../printerdrake.pm_.c:612
 msgid "Please choose the port where your printer is connected to."
 msgstr "Vyberte port, ke kterému je vaše tiskárna připojena."
 
-#: ../../printerdrake.pm_.c:601
+#: ../../printerdrake.pm_.c:614
 msgid ""
 " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
 "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
@@ -8562,19 +8557,19 @@ msgstr ""
 " (Paralelní porty: /dev/lp0, /dev/lp1,... je ekvivalentní LPT1:, LPT2:, ...,"
 "první USB tiskárna: /dev/usb/lp0, druhá USB tiskárna: /dev/usb/lp1,...)."
 
-#: ../../printerdrake.pm_.c:606
+#: ../../printerdrake.pm_.c:619
 msgid "You must choose/enter a printer/device!"
 msgstr "Musíte vybrat/zadat tiskárnu/zařízení!"
 
-#: ../../printerdrake.pm_.c:626
+#: ../../printerdrake.pm_.c:639
 msgid "Manual configuration"
 msgstr "Ruční nastavení"
 
-#: ../../printerdrake.pm_.c:680
+#: ../../printerdrake.pm_.c:693
 msgid "Remote lpd Printer Options"
 msgstr "Možnosti vzdálené lpd tiskárny"
 
-#: ../../printerdrake.pm_.c:681
+#: ../../printerdrake.pm_.c:694
 msgid ""
 "To use a remote lpd printer, you need to supply the hostname of the printer "
 "server and the printer name on that server."
@@ -8582,46 +8577,46 @@ msgstr ""
 "Abyste mohli používat vzdálenou tiskovou frontu lpd, musíte zadat název "
 "tiskového serveru a název tiskárny, kam má být posílán tisk."
 
-#: ../../printerdrake.pm_.c:682
+#: ../../printerdrake.pm_.c:695
 msgid "Remote host name"
 msgstr "Název vzdáleného počítače"
 
-#: ../../printerdrake.pm_.c:683
+#: ../../printerdrake.pm_.c:696
 msgid "Remote printer name"
 msgstr "Název vzdálené tiskárny"
 
-#: ../../printerdrake.pm_.c:686
+#: ../../printerdrake.pm_.c:699
 msgid "Remote host name missing!"
 msgstr "Chybí název vzdáleného počítače!"
 
-#: ../../printerdrake.pm_.c:690
+#: ../../printerdrake.pm_.c:703
 msgid "Remote printer name missing!"
 msgstr "Chybí název vzdálené tiskárny!"
 
-#: ../../printerdrake.pm_.c:712 ../../printerdrake.pm_.c:1225
+#: ../../printerdrake.pm_.c:727 ../../printerdrake.pm_.c:1244
 #, c-format
 msgid "Detected model: %s %s"
 msgstr "Nalezen model: %s %s"
 
-#: ../../printerdrake.pm_.c:790 ../../printerdrake.pm_.c:1030
+#: ../../printerdrake.pm_.c:805 ../../printerdrake.pm_.c:1045
 msgid "Scanning network..."
 msgstr "Zkoumám síť...."
 
-#: ../../printerdrake.pm_.c:799 ../../printerdrake.pm_.c:820
+#: ../../printerdrake.pm_.c:814 ../../printerdrake.pm_.c:835
 #, c-format
 msgid ", printer \"%s\" on server \"%s\""
 msgstr ", tiskárna \"%s\" na serveru \"%s\""
 
-#: ../../printerdrake.pm_.c:802 ../../printerdrake.pm_.c:823
+#: ../../printerdrake.pm_.c:817 ../../printerdrake.pm_.c:838
 #, c-format
 msgid "Printer \"%s\" on server \"%s\""
 msgstr "Tiskárna \"%s\" na serveru \"%s\""
 
-#: ../../printerdrake.pm_.c:843
+#: ../../printerdrake.pm_.c:858
 msgid "SMB (Windows 9x/NT) Printer Options"
 msgstr "Možnosti SMB (Windows 9x/NT) tiskárny"
 
-#: ../../printerdrake.pm_.c:844
+#: ../../printerdrake.pm_.c:859
 msgid ""
 "To print to a SMB printer, you need to provide the SMB host name (Note! It "
 "may be different from its TCP/IP hostname!) and possibly the IP address of "
@@ -8633,7 +8628,7 @@ msgstr ""
 "tiskového serveru, název sdílené tiskárny, vhodné uživatelské jméno, heslo a "
 "informace o pracovní skupině."
 
-#: ../../printerdrake.pm_.c:845
+#: ../../printerdrake.pm_.c:860
 msgid ""
 " If the desired printer was auto-detected, simply choose it from the list "
 "and then add user name, password, and/or workgroup if needed."
@@ -8642,39 +8637,39 @@ msgstr ""
 "ze seznamu a pokud je to potřeba, doplňte uživatelské jméno, heslo, a "
 "pracovní skupinu."
 
-#: ../../printerdrake.pm_.c:846
+#: ../../printerdrake.pm_.c:861
 msgid "SMB server host"
 msgstr "Název SMB serveru"
 
-#: ../../printerdrake.pm_.c:847
+#: ../../printerdrake.pm_.c:862
 msgid "SMB server IP"
 msgstr "IP adresa SMB serveru"
 
-#: ../../printerdrake.pm_.c:848
+#: ../../printerdrake.pm_.c:863
 msgid "Share name"
 msgstr "Sdílené jméno"
 
-#: ../../printerdrake.pm_.c:851
+#: ../../printerdrake.pm_.c:866
 msgid "Workgroup"
 msgstr "Pracovní skupina"
 
-#: ../../printerdrake.pm_.c:853
+#: ../../printerdrake.pm_.c:868
 msgid "Auto-detected"
 msgstr "Automaticky nalezeno"
 
-#: ../../printerdrake.pm_.c:864
+#: ../../printerdrake.pm_.c:879
 msgid "Either the server name or the server's IP must be given!"
 msgstr "Musí být zadán buď název serveru nebo jeho IP adresa!"
 
-#: ../../printerdrake.pm_.c:868
+#: ../../printerdrake.pm_.c:883
 msgid "Samba share name missing!"
 msgstr "Chybí název pro sdílení přes Sambu!"
 
-#: ../../printerdrake.pm_.c:874
+#: ../../printerdrake.pm_.c:889
 msgid "SECURITY WARNING!"
 msgstr "BEZPEČNOSTNÍ VAROVÁNÍ!"
 
-#: ../../printerdrake.pm_.c:875
+#: ../../printerdrake.pm_.c:890
 #, c-format
 msgid ""
 "You are about to set up printing to a Windows account with password. Due to "
@@ -8715,7 +8710,7 @@ msgstr ""
 "PrinterDrake.\n"
 "\n"
 
-#: ../../printerdrake.pm_.c:885
+#: ../../printerdrake.pm_.c:900
 #, c-format
 msgid ""
 "Set up your Windows server to make the printer available under the IPP "
@@ -8728,7 +8723,7 @@ msgstr ""
 "PrinterDrake.\n"
 "\n"
 
-#: ../../printerdrake.pm_.c:888
+#: ../../printerdrake.pm_.c:903
 msgid ""
 "Connect your printer to a Linux server and let your Windows machine(s) "
 "connect to it as a client.\n"
@@ -8740,11 +8735,11 @@ msgstr ""
 "\n"
 "Chcete opravdu pokračovat v nastavení tiskárny tímto způsobem?"
 
-#: ../../printerdrake.pm_.c:960
+#: ../../printerdrake.pm_.c:975
 msgid "NetWare Printer Options"
 msgstr "Možnosti NetWare tiskárny"
 
-#: ../../printerdrake.pm_.c:961
+#: ../../printerdrake.pm_.c:976
 msgid ""
 "To print on a NetWare printer, you need to provide the NetWare print server "
 "name (Note! it may be different from its TCP/IP hostname!) as well as the "
@@ -8755,37 +8750,37 @@ msgstr ""
 "serveru (Pozor! To může být odlišné od jeho názvu pro TCP/IP!), název "
 "tiskové fronty tiskárny, kterou chcete používat, uživatelské jméno a heslo."
 
-#: ../../printerdrake.pm_.c:962
+#: ../../printerdrake.pm_.c:977
 msgid "Printer Server"
 msgstr "Tiskový server"
 
-#: ../../printerdrake.pm_.c:963
+#: ../../printerdrake.pm_.c:978
 msgid "Print Queue Name"
 msgstr "Název tiskové fronty"
 
-#: ../../printerdrake.pm_.c:968
+#: ../../printerdrake.pm_.c:983
 msgid "NCP server name missing!"
 msgstr "Chybí název pro sdílení přes NCP!"
 
-#: ../../printerdrake.pm_.c:972
+#: ../../printerdrake.pm_.c:987
 msgid "NCP queue name missing!"
 msgstr "Chybí název tiskové fronty pro NCP!"
 
-#: ../../printerdrake.pm_.c:1039 ../../printerdrake.pm_.c:1059
+#: ../../printerdrake.pm_.c:1054 ../../printerdrake.pm_.c:1074
 #, c-format
 msgid ", host \"%s\", port %s"
 msgstr ", počítač \"%s\", port %s"
 
-#: ../../printerdrake.pm_.c:1042 ../../printerdrake.pm_.c:1062
+#: ../../printerdrake.pm_.c:1057 ../../printerdrake.pm_.c:1077
 #, c-format
 msgid "Host \"%s\", port %s"
 msgstr "Počítač \"%s\", port %s"
 
-#: ../../printerdrake.pm_.c:1082
+#: ../../printerdrake.pm_.c:1097
 msgid "TCP/Socket Printer Options"
 msgstr "Možnosti tiskárny pro TCP/Socket"
 
-#: ../../printerdrake.pm_.c:1084
+#: ../../printerdrake.pm_.c:1099
 msgid ""
 "Choose one of the auto-detected printers from the list or enter the hostname "
 "or IP and the optional port number (default is 9100) into the input fields."
@@ -8794,7 +8789,7 @@ msgstr ""
 "políček název nebo IP adresu tiskárny a volitelně číslo portu (výchozí je "
 "9100)."
 
-#: ../../printerdrake.pm_.c:1085
+#: ../../printerdrake.pm_.c:1100
 msgid ""
 "To print to a TCP or socket printer, you need to provide the host name or IP "
 "of the printer and optionally the port number (default is 9100). On HP "
@@ -8806,19 +8801,19 @@ msgstr ""
 "případěserverů HP JetDirect je číslo portu obvykle 9100, u jiných serverů "
 "může být jiné. Podívejte se do manuálu k vašemu hardware."
 
-#: ../../printerdrake.pm_.c:1090
+#: ../../printerdrake.pm_.c:1105
 msgid "Printer host name or IP missing!"
 msgstr "Chybí název nebo IP adresa tiskárny!"
 
-#: ../../printerdrake.pm_.c:1112
+#: ../../printerdrake.pm_.c:1127
 msgid "Printer host name or IP"
 msgstr "Název nebo IP adresa tiskárny"
 
-#: ../../printerdrake.pm_.c:1160 ../../printerdrake.pm_.c:1162
+#: ../../printerdrake.pm_.c:1177 ../../printerdrake.pm_.c:1179
 msgid "Printer Device URI"
 msgstr "URI Tiskového Zařízení"
 
-#: ../../printerdrake.pm_.c:1161
+#: ../../printerdrake.pm_.c:1178
 msgid ""
 "You can specify directly the URI to access the printer. The URI must fulfill "
 "either the CUPS or the Foomatic specifications. Note that not all URI types "
@@ -8828,11 +8823,11 @@ msgstr ""
 "specifikaci CUPS nebo Foomatic. Také pamatujte na to, že všechny URI nejsou "
 "podporovány ve všech tiskových správcích."
 
-#: ../../printerdrake.pm_.c:1176
+#: ../../printerdrake.pm_.c:1193
 msgid "A valid URI must be entered!"
 msgstr "Musí být zadáno správné URI!"
 
-#: ../../printerdrake.pm_.c:1541
+#: ../../printerdrake.pm_.c:1560
 msgid ""
 "Every printer needs a name (for example \"printer\"). The Description and "
 "Location fields do not need to be filled in. They are comments for the users."
@@ -8840,27 +8835,27 @@ msgstr ""
 "Každá tiskárna potřebuje název (např. \"tiskarna\"). Popis a umístění nemusí "
 "být vyplněny. Jsou to komentáře pouze pro uživatele."
 
-#: ../../printerdrake.pm_.c:1542
+#: ../../printerdrake.pm_.c:1561
 msgid "Name of printer"
 msgstr "Název tiskárny"
 
-#: ../../printerdrake.pm_.c:1544
+#: ../../printerdrake.pm_.c:1563
 msgid "Location"
 msgstr "Umístění"
 
-#: ../../printerdrake.pm_.c:1556 ../../printerdrake.pm_.c:1678
+#: ../../printerdrake.pm_.c:1575 ../../printerdrake.pm_.c:1697
 msgid "Reading printer database..."
 msgstr "Načítám databázi tiskáren ..."
 
-#: ../../printerdrake.pm_.c:1560
+#: ../../printerdrake.pm_.c:1579
 msgid "Preparing printer database..."
 msgstr "Načítám databázi tiskáren ..."
 
-#: ../../printerdrake.pm_.c:1657
+#: ../../printerdrake.pm_.c:1676
 msgid "Your printer model"
 msgstr "Model tiskárny"
 
-#: ../../printerdrake.pm_.c:1658
+#: ../../printerdrake.pm_.c:1677
 #, c-format
 msgid ""
 "Printerdrake has compared the model name resulting from the printer auto-"
@@ -8885,24 +8880,24 @@ msgstr ""
 "\n"
 "%s"
 
-#: ../../printerdrake.pm_.c:1663 ../../printerdrake.pm_.c:1666
+#: ../../printerdrake.pm_.c:1682 ../../printerdrake.pm_.c:1685
 msgid "The model is correct"
 msgstr "Zvolený model je správný"
 
-#: ../../printerdrake.pm_.c:1664 ../../printerdrake.pm_.c:1665
-#: ../../printerdrake.pm_.c:1668
+#: ../../printerdrake.pm_.c:1683 ../../printerdrake.pm_.c:1684
+#: ../../printerdrake.pm_.c:1687
 msgid "Select model manually"
 msgstr "Vybrat model ručně"
 
-#: ../../printerdrake.pm_.c:1685
+#: ../../printerdrake.pm_.c:1704
 msgid "Printer model selection"
 msgstr "Výběr modelu tiskárny"
 
-#: ../../printerdrake.pm_.c:1686
+#: ../../printerdrake.pm_.c:1705
 msgid "Which printer model do you have?"
 msgstr "Jaký model tiskárny máte?"
 
-#: ../../printerdrake.pm_.c:1687
+#: ../../printerdrake.pm_.c:1706
 msgid ""
 "\n"
 "\n"
@@ -8916,7 +8911,7 @@ msgstr ""
 "správně. Pokud je vyznačen nesprávný model, můžete ho změnit výběrem ze "
 "seznamu nebo zvolte \"Raw printer\"."
 
-#: ../../printerdrake.pm_.c:1690
+#: ../../printerdrake.pm_.c:1709
 msgid ""
 "If your printer is not listed, choose a compatible (see printer manual) or a "
 "similar one."
@@ -8924,11 +8919,11 @@ msgstr ""
 "Pokud není tiskárna v seznamu, vyberte kompatibilní nebo podobný model "
 "(podívejte se do manuálu)"
 
-#: ../../printerdrake.pm_.c:1767
+#: ../../printerdrake.pm_.c:1786
 msgid "OKI winprinter configuration"
 msgstr "Nastavení pro OKI win-tiskárnu"
 
-#: ../../printerdrake.pm_.c:1768
+#: ../../printerdrake.pm_.c:1787
 msgid ""
 "You are configuring an OKI laser winprinter. These printers\n"
 "use a very special communication protocol and therefore they work only when "
@@ -8943,11 +8938,11 @@ msgstr ""
 "port, nebo se tiskne přes server, připojte tiskárnu na první paralelní port. "
 "Jinak tisk nebude pracovat. Typ připojení bude ovladač ignorovat."
 
-#: ../../printerdrake.pm_.c:1811 ../../printerdrake.pm_.c:1838
+#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1857
 msgid "Lexmark inkjet configuration"
 msgstr "Nastavení inkoustové tiskárny Lexmark"
 
-#: ../../printerdrake.pm_.c:1812
+#: ../../printerdrake.pm_.c:1831
 msgid ""
 "The inkjet printer drivers provided by Lexmark only support local printers, "
 "no printers on remote machines or print server boxes. Please connect your "
@@ -8959,7 +8954,7 @@ msgstr ""
 "tiskárnu na lokální port nebo ji nastavte na tom počítači, ke kterému bude "
 "připojena."
 
-#: ../../printerdrake.pm_.c:1839
+#: ../../printerdrake.pm_.c:1858
 msgid ""
 "To be able to print with your Lexmark inkjet and this configuration, you "
 "need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
@@ -8980,11 +8975,11 @@ msgstr ""
 "tiskových hlav programem \"lexmarkmaintain\" a nastavit zarovnání tiskové "
 "hlavy pomocí tohoto programu."
 
-#: ../../printerdrake.pm_.c:1842
+#: ../../printerdrake.pm_.c:1861
 msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
 msgstr "Laserová tiskárna GDI používající formát Zenographics ZJ-Stream"
 
-#: ../../printerdrake.pm_.c:1843
+#: ../../printerdrake.pm_.c:1862
 msgid ""
 "Your printer belongs to the group of GDI laser printers (winprinters) sold "
 "by different manufacturers which uses the Zenographics ZJ-stream raster "
@@ -9025,7 +9020,7 @@ msgstr ""
 "První příkaz může zadat i běžný uživatel, druhý může provést pouze uživatel "
 "root. Poté, co výše uvedené provedete, můžete normálně tisknout.\n"
 
-#: ../../printerdrake.pm_.c:2066
+#: ../../printerdrake.pm_.c:2085
 msgid ""
 "Printer default settings\n"
 "\n"
@@ -9041,22 +9036,22 @@ msgstr ""
 "podavač) jsou nastaveny správně. Při tisku ve velmi vysoké kvalitě/rozlišení "
 "bude tisk zřejmě pomalejší."
 
-#: ../../printerdrake.pm_.c:2075
+#: ../../printerdrake.pm_.c:2094
 #, c-format
 msgid "Option %s must be an integer number!"
 msgstr "Hodnota %s musí být celé číslo!"
 
-#: ../../printerdrake.pm_.c:2079
+#: ../../printerdrake.pm_.c:2098
 #, c-format
 msgid "Option %s must be a number!"
 msgstr "Hodnota %s musí být číslo!"
 
-#: ../../printerdrake.pm_.c:2084
+#: ../../printerdrake.pm_.c:2103
 #, c-format
 msgid "Option %s out of range!"
 msgstr "Hodnota %s je mimo rozsah!"
 
-#: ../../printerdrake.pm_.c:2123
+#: ../../printerdrake.pm_.c:2142
 #, c-format
 msgid ""
 "Do you want to set this printer (\"%s\")\n"
@@ -9065,11 +9060,11 @@ msgstr ""
 "Chcete opravdu nastavit tiskárnu \"%s\"\n"
 "jako výchozí?"
 
-#: ../../printerdrake.pm_.c:2146
+#: ../../printerdrake.pm_.c:2165
 msgid "Test pages"
 msgstr "Testovací stránka"
 
-#: ../../printerdrake.pm_.c:2147
+#: ../../printerdrake.pm_.c:2166
 msgid ""
 "Please select the test pages you want to print.\n"
 "Note: the photo test page can take a rather long time to get printed and on "
@@ -9081,39 +9076,39 @@ msgstr ""
 "se na tiskárně s málo pamětí nemusí podařit vůbec. Ve většině případů stačí "
 "vytisknout běžnou testovací stránku."
 
-#: ../../printerdrake.pm_.c:2151
+#: ../../printerdrake.pm_.c:2170
 msgid "No test pages"
 msgstr "Bez testovací stránky"
 
-#: ../../printerdrake.pm_.c:2152
+#: ../../printerdrake.pm_.c:2171
 msgid "Print"
 msgstr "Tisk"
 
-#: ../../printerdrake.pm_.c:2209
+#: ../../printerdrake.pm_.c:2228
 msgid "Standard test page"
 msgstr "Standardní testovací stránka"
 
-#: ../../printerdrake.pm_.c:2212
+#: ../../printerdrake.pm_.c:2231
 msgid "Alternative test page (Letter)"
 msgstr "Alternativní testovací stránka (Letter)"
 
-#: ../../printerdrake.pm_.c:2215
+#: ../../printerdrake.pm_.c:2234
 msgid "Alternative test page (A4)"
 msgstr "Alternativní testovací stránka (A4)"
 
-#: ../../printerdrake.pm_.c:2217
+#: ../../printerdrake.pm_.c:2236
 msgid "Photo test page"
 msgstr "Testovací stránka s fotografií"
 
-#: ../../printerdrake.pm_.c:2221
+#: ../../printerdrake.pm_.c:2240
 msgid "Do not print any test page"
 msgstr "Netisknout testovací stránku"
 
-#: ../../printerdrake.pm_.c:2230 ../../printerdrake.pm_.c:2383
+#: ../../printerdrake.pm_.c:2249 ../../printerdrake.pm_.c:2402
 msgid "Printing test page(s)..."
 msgstr "Tisknu testovací stránku(y)"
 
-#: ../../printerdrake.pm_.c:2255
+#: ../../printerdrake.pm_.c:2274
 #, c-format
 msgid ""
 "Test page(s) have been sent to the printer.\n"
@@ -9128,7 +9123,7 @@ msgstr ""
 "%s\n"
 "\n"
 
-#: ../../printerdrake.pm_.c:2259
+#: ../../printerdrake.pm_.c:2278
 msgid ""
 "Test page(s) have been sent to the printer.\n"
 "It may take some time before the printer starts.\n"
@@ -9136,15 +9131,15 @@ msgstr ""
 "Zkušební stránka byl poslána na tiskárnu.\n"
 "Může chvilku trvat než začne tisk.\n"
 
-#: ../../printerdrake.pm_.c:2266
+#: ../../printerdrake.pm_.c:2285
 msgid "Did it work properly?"
 msgstr "Proběhl tisk správně ?"
 
-#: ../../printerdrake.pm_.c:2288 ../../printerdrake.pm_.c:3445
+#: ../../printerdrake.pm_.c:2307 ../../printerdrake.pm_.c:3464
 msgid "Raw printer"
 msgstr "Přímý tisk na tiskárnu"
 
-#: ../../printerdrake.pm_.c:2314
+#: ../../printerdrake.pm_.c:2333
 #, c-format
 msgid ""
 "To print a file from the command line (terminal window) you can either use "
@@ -9157,7 +9152,7 @@ msgstr ""
 "<soubor>\". Grafické nástroje umožňují jednoduše vybrat tiskárny a měnit "
 "jejich parametry.\n"
 
-#: ../../printerdrake.pm_.c:2316
+#: ../../printerdrake.pm_.c:2335
 msgid ""
 "These commands you can also use in the \"Printing command\" field of the "
 "printing dialogs of many applications, but here do not supply the file name "
@@ -9167,8 +9162,8 @@ msgstr ""
 "většině aplikací, ale nezadává se zde název souboru, které je pokaždé jiné v "
 "závislosti na dané aplikaci.\n"
 
-#: ../../printerdrake.pm_.c:2319 ../../printerdrake.pm_.c:2336
-#: ../../printerdrake.pm_.c:2346
+#: ../../printerdrake.pm_.c:2338 ../../printerdrake.pm_.c:2355
+#: ../../printerdrake.pm_.c:2365
 #, c-format
 msgid ""
 "\n"
@@ -9181,7 +9176,7 @@ msgstr ""
 "Jednoduše zadejte potřebné nastavení do příkazové řádky, např. \"%s<soubor>"
 "\". "
 
-#: ../../printerdrake.pm_.c:2322 ../../printerdrake.pm_.c:2362
+#: ../../printerdrake.pm_.c:2341 ../../printerdrake.pm_.c:2381
 #, c-format
 msgid ""
 "To know about the options available for the current printer read either the "
@@ -9192,7 +9187,7 @@ msgstr ""
 "klepněte na tlačítko \"Možnosti tiskárny\".%s%s\n"
 "\n"
 
-#: ../../printerdrake.pm_.c:2326
+#: ../../printerdrake.pm_.c:2345
 msgid ""
 "Here is a list of the available printing options for the current printer:\n"
 "\n"
@@ -9200,7 +9195,7 @@ msgstr ""
 "Zde je seznam dostupných voleb pro nastavení tisku pro aktuální tiskárnu:\n"
 "\n"
 
-#: ../../printerdrake.pm_.c:2331 ../../printerdrake.pm_.c:2341
+#: ../../printerdrake.pm_.c:2350 ../../printerdrake.pm_.c:2360
 #, c-format
 msgid ""
 "To print a file from the command line (terminal window) use the command \"%s "
@@ -9209,8 +9204,8 @@ msgstr ""
 "Pro vytištění souboru z příkazové řádky (v terminálovém okně) použijte "
 "příkaz \"%s <soubor>\".\n"
 
-#: ../../printerdrake.pm_.c:2333 ../../printerdrake.pm_.c:2343
-#: ../../printerdrake.pm_.c:2353
+#: ../../printerdrake.pm_.c:2352 ../../printerdrake.pm_.c:2362
+#: ../../printerdrake.pm_.c:2372
 msgid ""
 "This command you can also use in the \"Printing command\" field of the "
 "printing dialogs of many applications. But here do not supply the file name "
@@ -9220,7 +9215,7 @@ msgstr ""
 "většině aplikací, ale nezadává se zde název souboru, které je pokaždé jiné v "
 "závislosti na dané aplikaci.\n"
 
-#: ../../printerdrake.pm_.c:2338 ../../printerdrake.pm_.c:2348
+#: ../../printerdrake.pm_.c:2357 ../../printerdrake.pm_.c:2367
 msgid ""
 "To get a list of the options available for the current printer click on the "
 "\"Print option list\" button."
@@ -9228,7 +9223,7 @@ msgstr ""
 "Všechny možnosti tisku pro současnou tiskárnu jsou zobrazeny níže, nebo "
 "klepněte na tlačítko \"Možnosti tiskárny\"."
 
-#: ../../printerdrake.pm_.c:2351
+#: ../../printerdrake.pm_.c:2370
 #, c-format
 msgid ""
 "To print a file from the command line (terminal window) use the command \"%s "
@@ -9237,7 +9232,7 @@ msgstr ""
 "Pro vytištění souboru z příkazové řádky (v terminálovém okně) použijte "
 "příkaz \"%s <soubor>\" nebo \"%s <soubor>\".\n"
 
-#: ../../printerdrake.pm_.c:2355
+#: ../../printerdrake.pm_.c:2374
 msgid ""
 "You can also use the graphical interface \"xpdq\" for setting options and "
 "handling printing jobs.\n"
@@ -9252,7 +9247,7 @@ msgstr ""
 "pojmenovanou \"STOP Printer!\", který po kliknutí ihned zastaví všechny "
 "tiskové úlohy. To je vhodné třeba pro případy uvíznutí papíru.\n"
 
-#: ../../printerdrake.pm_.c:2359
+#: ../../printerdrake.pm_.c:2378
 #, c-format
 msgid ""
 "\n"
@@ -9265,40 +9260,40 @@ msgstr ""
 "Jednoduše zadejte potřebné nastavení do příkazové řádky, např. \"%s <soubor>"
 "\".\n"
 
-#: ../../printerdrake.pm_.c:2369
+#: ../../printerdrake.pm_.c:2388
 #, c-format
 msgid "Printing/Scanning/Photo Cards on \"%s\""
 msgstr "Tisk/Skenování/Foto karty na \"%s\""
 
-#: ../../printerdrake.pm_.c:2370
+#: ../../printerdrake.pm_.c:2389
 #, c-format
 msgid "Printing/Scanning on \"%s\""
 msgstr "Tisk/Skenování na \"%s\""
 
-#: ../../printerdrake.pm_.c:2372
+#: ../../printerdrake.pm_.c:2391
 #, c-format
 msgid "Printing/Photo Card Access on \"%s\""
 msgstr "Tisk/Přístup k foto kartám na \"%s\""
 
-#: ../../printerdrake.pm_.c:2373
+#: ../../printerdrake.pm_.c:2392
 #, c-format
 msgid "Printing on the printer \"%s\""
 msgstr "Tisknu na tiskárnu \"%s\""
 
-#: ../../printerdrake.pm_.c:2376 ../../printerdrake.pm_.c:2379
-#: ../../printerdrake.pm_.c:2380 ../../printerdrake.pm_.c:2381
-#: ../../printerdrake.pm_.c:3429 ../../standalone/drakTermServ_.c:248
+#: ../../printerdrake.pm_.c:2395 ../../printerdrake.pm_.c:2398
+#: ../../printerdrake.pm_.c:2399 ../../printerdrake.pm_.c:2400
+#: ../../printerdrake.pm_.c:3448 ../../standalone/drakTermServ_.c:248
 #: ../../standalone/drakbackup_.c:1562 ../../standalone/drakbackup_.c:4210
 #: ../../standalone/drakbug_.c:130 ../../standalone/drakfont_.c:705
 #: ../../standalone/drakfont_.c:1014
 msgid "Close"
 msgstr "Zavřít"
 
-#: ../../printerdrake.pm_.c:2379
+#: ../../printerdrake.pm_.c:2398
 msgid "Print option list"
 msgstr "Možnosti tiskárny"
 
-#: ../../printerdrake.pm_.c:2399
+#: ../../printerdrake.pm_.c:2418
 #, c-format
 msgid ""
 "Your multi-function device was configured automatically to be able to scan. "
@@ -9321,7 +9316,7 @@ msgstr ""
 "\n"
 "Nepoužívejte pro toto zařízení \"scannerdrake\"!"
 
-#: ../../printerdrake.pm_.c:2420
+#: ../../printerdrake.pm_.c:2439
 msgid ""
 "Your printer was configured automatically to give you access to the photo "
 "card drives from your PC. Now you can access your photo cards using the "
@@ -9343,17 +9338,17 @@ msgstr ""
 "\"MtoolsFM\" můžete přepínat mezi písmeny zařízení pomocí políčka v pravém "
 "horním rohu každého výčtu souborů."
 
-#: ../../printerdrake.pm_.c:2442 ../../printerdrake.pm_.c:2904
-#: ../../printerdrake.pm_.c:3199
+#: ../../printerdrake.pm_.c:2461 ../../printerdrake.pm_.c:2923
+#: ../../printerdrake.pm_.c:3218
 msgid "Reading printer data..."
 msgstr "Načítám data k tisku ..."
 
-#: ../../printerdrake.pm_.c:2462 ../../printerdrake.pm_.c:2490
-#: ../../printerdrake.pm_.c:2525
+#: ../../printerdrake.pm_.c:2481 ../../printerdrake.pm_.c:2509
+#: ../../printerdrake.pm_.c:2544
 msgid "Transfer printer configuration"
 msgstr "Přenést konfiguraci tiskárny"
 
-#: ../../printerdrake.pm_.c:2463
+#: ../../printerdrake.pm_.c:2482
 #, c-format
 msgid ""
 "You can copy the printer configuration which you have done for the spooler %"
@@ -9368,7 +9363,7 @@ msgstr ""
 "ale tiskové úlohy nebudou přeneseny.\n"
 "Ne všechny fronty lze přenést z následujích důvodů:\n"
 
-#: ../../printerdrake.pm_.c:2466
+#: ../../printerdrake.pm_.c:2485
 msgid ""
 "CUPS does not support printers on Novell servers or printers sending the "
 "data into a free-formed command.\n"
@@ -9376,7 +9371,7 @@ msgstr ""
 "CUPS nepodporuje tiskárny na serverech Novell nebo tiskárny, které posílají "
 "data na skupinu příkazů.\n"
 
-#: ../../printerdrake.pm_.c:2468
+#: ../../printerdrake.pm_.c:2487
 msgid ""
 "PDQ only supports local printers, remote LPD printers, and Socket/TCP "
 "printers.\n"
@@ -9384,11 +9379,11 @@ msgstr ""
 "PDQ podporuje pouze místní tiskárny, vzdálené tiskárny LPD a tisk na "
 "tiskárny přes sokety/TCP.\n"
 
-#: ../../printerdrake.pm_.c:2470
+#: ../../printerdrake.pm_.c:2489
 msgid "LPD and LPRng do not support IPP printers.\n"
 msgstr "LPD ani LprNG nepodporují IPP tiskárny.\n"
 
-#: ../../printerdrake.pm_.c:2472
+#: ../../printerdrake.pm_.c:2491
 msgid ""
 "In addition, queues not created with this program or \"foomatic-configure\" "
 "cannot be transferred."
@@ -9396,7 +9391,7 @@ msgstr ""
 "Tiskové fronty, které nebyly vytvořeny tímto programem nebo přes \"foomatic-"
 "configure\" nelze přenést."
 
-#: ../../printerdrake.pm_.c:2473
+#: ../../printerdrake.pm_.c:2492
 msgid ""
 "\n"
 "Also printers configured with the PPD files provided by their manufacturers "
@@ -9406,7 +9401,7 @@ msgstr ""
 "Také tiskárny používající PPD soubory od jejich výrobců nebo tiskárny s "
 "nativními ovladači pro CUPS nelze přenést."
 
-#: ../../printerdrake.pm_.c:2474
+#: ../../printerdrake.pm_.c:2493
 msgid ""
 "\n"
 "Mark the printers which you want to transfer and click \n"
@@ -9415,15 +9410,15 @@ msgstr ""
 "\n"
 "Označte tiskárnu, kterou chcete přenést a stiskněte \"Přenést\"."
 
-#: ../../printerdrake.pm_.c:2477
+#: ../../printerdrake.pm_.c:2496
 msgid "Do not transfer printers"
 msgstr "Nepřenášet tiskárny"
 
-#: ../../printerdrake.pm_.c:2478 ../../printerdrake.pm_.c:2495
+#: ../../printerdrake.pm_.c:2497 ../../printerdrake.pm_.c:2514
 msgid "Transfer"
 msgstr "Přenést"
 
-#: ../../printerdrake.pm_.c:2491
+#: ../../printerdrake.pm_.c:2510
 #, c-format
 msgid ""
 "A printer named \"%s\" already exists under %s. \n"
@@ -9434,11 +9429,11 @@ msgstr ""
 "Klikněte na \"Přenést\" pro přepsání.\n"
 "Také můžete napsat nový název nebo ji přeskočit."
 
-#: ../../printerdrake.pm_.c:2499
+#: ../../printerdrake.pm_.c:2518
 msgid "Name of printer should contain only letters, numbers and the underscore"
 msgstr "Název fronty může obsahovat pouze písmena, číslice a podtržítko"
 
-#: ../../printerdrake.pm_.c:2504
+#: ../../printerdrake.pm_.c:2523
 #, c-format
 msgid ""
 "The printer \"%s\" already exists,\n"
@@ -9447,16 +9442,16 @@ msgstr ""
 "Tiskárna s názvem %s již existuje,\n"
 "chcete opravdu přepsat její konfiguraci?"
 
-#: ../../printerdrake.pm_.c:2512
+#: ../../printerdrake.pm_.c:2531
 msgid "New printer name"
 msgstr "Nový název tiskárny"
 
-#: ../../printerdrake.pm_.c:2515
+#: ../../printerdrake.pm_.c:2534
 #, c-format
 msgid "Transferring %s..."
 msgstr "Přenáším %s ..."
 
-#: ../../printerdrake.pm_.c:2526
+#: ../../printerdrake.pm_.c:2545
 #, c-format
 msgid ""
 "You have transferred your former default printer (\"%s\"), Should it be also "
@@ -9465,29 +9460,29 @@ msgstr ""
 "Byla přenesena výchozí tiskárna (\"%s\"). Má se nastavit jako výchozí také "
 "na vzdáleném tiskovém systému %s?"
 
-#: ../../printerdrake.pm_.c:2536
+#: ../../printerdrake.pm_.c:2555
 msgid "Refreshing printer data..."
 msgstr "Občerstvuji tisková data ...."
 
-#: ../../printerdrake.pm_.c:2544 ../../printerdrake.pm_.c:2619
-#: ../../printerdrake.pm_.c:2631
+#: ../../printerdrake.pm_.c:2563 ../../printerdrake.pm_.c:2638
+#: ../../printerdrake.pm_.c:2650
 msgid "Configuration of a remote printer"
 msgstr "Nastavení vzdálené tiskárny"
 
-#: ../../printerdrake.pm_.c:2545
+#: ../../printerdrake.pm_.c:2564
 msgid "Starting network..."
 msgstr "Spouštím síť ...."
 
-#: ../../printerdrake.pm_.c:2580 ../../printerdrake.pm_.c:2584
-#: ../../printerdrake.pm_.c:2586
+#: ../../printerdrake.pm_.c:2599 ../../printerdrake.pm_.c:2603
+#: ../../printerdrake.pm_.c:2605
 msgid "Configure the network now"
 msgstr "Nastavit síť nyní"
 
-#: ../../printerdrake.pm_.c:2581
+#: ../../printerdrake.pm_.c:2600
 msgid "Network functionality not configured"
 msgstr "Síť není nastavena"
 
-#: ../../printerdrake.pm_.c:2582
+#: ../../printerdrake.pm_.c:2601
 msgid ""
 "You are going to configure a remote printer. This needs working network "
 "access, but your network is not configured yet. If you go on without network "
@@ -9498,11 +9493,11 @@ msgstr ""
 "spojení, ale síť není zatím nastavena. Pokud budete pokračovat bez nastavení "
 "sítě, nebude možné použít tiskárnu, kterou požadujete. Jak chcete pokračovat?"
 
-#: ../../printerdrake.pm_.c:2585
+#: ../../printerdrake.pm_.c:2604
 msgid "Go on without configuring the network"
 msgstr "Pokračovat bez nastavení sítě"
 
-#: ../../printerdrake.pm_.c:2621
+#: ../../printerdrake.pm_.c:2640
 msgid ""
 "The network configuration done during the installation cannot be started "
 "now. Please check whether the network gets accessable after booting your "
@@ -9516,7 +9511,7 @@ msgstr ""
 "Mandrake, v sekci \"Síť a Internet\"/\"Připojení\" a následně nastavte "
 "tiskárnu také v řídícím centru v sekci \"Hardware\"/\"Tiskárna\""
 
-#: ../../printerdrake.pm_.c:2622
+#: ../../printerdrake.pm_.c:2641
 msgid ""
 "The network access was not running and could not be started. Please check "
 "your configuration and your hardware. Then try to configure your remote "
@@ -9525,24 +9520,24 @@ msgstr ""
 "Síť nefunguje a nelze ji spustit. Prosím zkontrolujte nastavení hardware. "
 "Pak se opět pokuste provést nastavení vzdálené tiskárny."
 
-#: ../../printerdrake.pm_.c:2632
+#: ../../printerdrake.pm_.c:2651
 msgid "Restarting printing system..."
 msgstr "Restartuji tiskový systém ..."
 
-#: ../../printerdrake.pm_.c:2670
+#: ../../printerdrake.pm_.c:2689
 msgid "high"
 msgstr "vysoká"
 
-#: ../../printerdrake.pm_.c:2670
+#: ../../printerdrake.pm_.c:2689
 msgid "paranoid"
 msgstr "paranoidní"
 
-#: ../../printerdrake.pm_.c:2671
+#: ../../printerdrake.pm_.c:2690
 #, c-format
 msgid "Installing a printing system in the %s security level"
 msgstr "Instaluji tiskový systém v bezpečnostní úrovni %s"
 
-#: ../../printerdrake.pm_.c:2672
+#: ../../printerdrake.pm_.c:2691
 #, c-format
 msgid ""
 "You are about to install the printing system %s on a system running in the %"
@@ -9567,11 +9562,11 @@ msgstr ""
 "\n"
 "Chcete opravdu nastavit tiskový systém na tomto počítači?"
 
-#: ../../printerdrake.pm_.c:2704
+#: ../../printerdrake.pm_.c:2723
 msgid "Starting the printing system at boot time"
 msgstr "Spustit tiskový systém při startu systému"
 
-#: ../../printerdrake.pm_.c:2705
+#: ../../printerdrake.pm_.c:2724
 #, c-format
 msgid ""
 "The printing system (%s) will not be started automatically when the machine "
@@ -9591,59 +9586,59 @@ msgstr ""
 "\n"
 "Chcete nastavit zpět automatický start tiskového systému?"
 
-#: ../../printerdrake.pm_.c:2729 ../../printerdrake.pm_.c:2770
-#: ../../printerdrake.pm_.c:2809 ../../printerdrake.pm_.c:2851
-#: ../../printerdrake.pm_.c:2972
+#: ../../printerdrake.pm_.c:2748 ../../printerdrake.pm_.c:2789
+#: ../../printerdrake.pm_.c:2828 ../../printerdrake.pm_.c:2870
+#: ../../printerdrake.pm_.c:2991
 msgid "Checking installed software..."
 msgstr "Ověřují nainstalovaný software..."
 
-#: ../../printerdrake.pm_.c:2775
+#: ../../printerdrake.pm_.c:2794
 msgid "Removing LPRng..."
 msgstr "Odebírám LprNG..."
 
-#: ../../printerdrake.pm_.c:2814
+#: ../../printerdrake.pm_.c:2833
 msgid "Removing LPD..."
 msgstr "Odebírám LPD..."
 
-#: ../../printerdrake.pm_.c:2887
+#: ../../printerdrake.pm_.c:2906
 msgid "Select Printer Spooler"
 msgstr "Zvolte tiskový systém pro tiskárnu"
 
-#: ../../printerdrake.pm_.c:2888
+#: ../../printerdrake.pm_.c:2907
 msgid "Which printing system (spooler) do you want to use?"
 msgstr "Který tiskový systém chcete použít pro tisk?"
 
-#: ../../printerdrake.pm_.c:2924
+#: ../../printerdrake.pm_.c:2943
 #, c-format
 msgid "Configuring printer \"%s\"..."
 msgstr "Nastavuji tiskárnu \"%s\"..."
 
-#: ../../printerdrake.pm_.c:2938
+#: ../../printerdrake.pm_.c:2957
 msgid "Installing Foomatic..."
 msgstr "Instaluji Foomatic ..."
 
-#: ../../printerdrake.pm_.c:3008 ../../printerdrake.pm_.c:3049
-#: ../../printerdrake.pm_.c:3446 ../../printerdrake.pm_.c:3519
+#: ../../printerdrake.pm_.c:3027 ../../printerdrake.pm_.c:3068
+#: ../../printerdrake.pm_.c:3465 ../../printerdrake.pm_.c:3538
 msgid "Printer options"
 msgstr "Možnosti tiskárny"
 
-#: ../../printerdrake.pm_.c:3018
+#: ../../printerdrake.pm_.c:3037
 msgid "Preparing Printerdrake..."
 msgstr "Připravuji PrinterDrake...."
 
-#: ../../printerdrake.pm_.c:3036 ../../printerdrake.pm_.c:3609
+#: ../../printerdrake.pm_.c:3055 ../../printerdrake.pm_.c:3628
 msgid "Configuring applications..."
 msgstr "Nastavování aplikací..."
 
-#: ../../printerdrake.pm_.c:3056
+#: ../../printerdrake.pm_.c:3075
 msgid "Would you like to configure printing?"
 msgstr "Chtěli byste nastavit tiskárnu?"
 
-#: ../../printerdrake.pm_.c:3068
+#: ../../printerdrake.pm_.c:3087
 msgid "Printing system: "
 msgstr "Tiskový systém: "
 
-#: ../../printerdrake.pm_.c:3128
+#: ../../printerdrake.pm_.c:3147
 msgid ""
 "The following printers are configured. Double-click on a printer to change "
 "its settings; to make it the default printer; to view information about it; "
@@ -9655,7 +9650,7 @@ msgstr ""
 "nastavit na vzdáleném CUPS serveru pro využití v aplikaci Star Office/"
 "OpenOffice.org/GIMP."
 
-#: ../../printerdrake.pm_.c:3129
+#: ../../printerdrake.pm_.c:3148
 msgid ""
 "The following printers are configured. Double-click on a printer to change "
 "its settings; to make it the default printer; or to view information about "
@@ -9664,28 +9659,28 @@ msgstr ""
 "Jsou nastaveny následující tiskárny. Dvojitým kliknutím na každou z nich je "
 "možné je modifikovat, nastavit jako výchozí nebo o nich získat informace."
 
-#: ../../printerdrake.pm_.c:3156
+#: ../../printerdrake.pm_.c:3175
 msgid "Refresh printer list (to display all available remote CUPS printers)"
 msgstr "Obnovit seznam tiskáren (pro získání všech vzdálených CUPS tiskáren)"
 
-#: ../../printerdrake.pm_.c:3174
+#: ../../printerdrake.pm_.c:3193
 msgid "Change the printing system"
 msgstr "Změna tiskového systému"
 
-#: ../../printerdrake.pm_.c:3179 ../../standalone/drakconnect_.c:277
+#: ../../printerdrake.pm_.c:3198 ../../standalone/drakconnect_.c:277
 msgid "Normal Mode"
 msgstr "Normání režim"
 
-#: ../../printerdrake.pm_.c:3339 ../../printerdrake.pm_.c:3389
-#: ../../printerdrake.pm_.c:3602
+#: ../../printerdrake.pm_.c:3358 ../../printerdrake.pm_.c:3408
+#: ../../printerdrake.pm_.c:3621
 msgid "Do you want to configure another printer?"
 msgstr "Chcete nastavit další tiskárnu?"
 
-#: ../../printerdrake.pm_.c:3424
+#: ../../printerdrake.pm_.c:3443
 msgid "Modify printer configuration"
 msgstr "Změnit nastavení tiskárny"
 
-#: ../../printerdrake.pm_.c:3426
+#: ../../printerdrake.pm_.c:3445
 #, c-format
 msgid ""
 "Printer %s\n"
@@ -9694,86 +9689,86 @@ msgstr ""
 "Tiskárna %s\n"
 "Co chcete změnit na této tiskárně?"
 
-#: ../../printerdrake.pm_.c:3430
+#: ../../printerdrake.pm_.c:3449
 msgid "Do it!"
 msgstr "Provést!"
 
-#: ../../printerdrake.pm_.c:3435 ../../printerdrake.pm_.c:3490
+#: ../../printerdrake.pm_.c:3454 ../../printerdrake.pm_.c:3509
 msgid "Printer connection type"
 msgstr "Typ připojení pro tiskárnu"
 
-#: ../../printerdrake.pm_.c:3436 ../../printerdrake.pm_.c:3494
+#: ../../printerdrake.pm_.c:3455 ../../printerdrake.pm_.c:3513
 msgid "Printer name, description, location"
 msgstr "Název tiskárny, popis, umístění"
 
-#: ../../printerdrake.pm_.c:3438 ../../printerdrake.pm_.c:3512
+#: ../../printerdrake.pm_.c:3457 ../../printerdrake.pm_.c:3531
 msgid "Printer manufacturer, model, driver"
 msgstr "Výrobce tiskárny, model, ovladač"
 
-#: ../../printerdrake.pm_.c:3439 ../../printerdrake.pm_.c:3513
+#: ../../printerdrake.pm_.c:3458 ../../printerdrake.pm_.c:3532
 msgid "Printer manufacturer, model"
 msgstr "Výrobce tiskárny, model"
 
-#: ../../printerdrake.pm_.c:3448 ../../printerdrake.pm_.c:3523
+#: ../../printerdrake.pm_.c:3467 ../../printerdrake.pm_.c:3542
 msgid "Set this printer as the default"
 msgstr "Nastavit tuto tiskárnu jako výchozí"
 
-#: ../../printerdrake.pm_.c:3450 ../../printerdrake.pm_.c:3528
+#: ../../printerdrake.pm_.c:3469 ../../printerdrake.pm_.c:3547
 msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
 msgstr "Přidat tuto tiskárnu do Star Office/OpenOffice.org/GIMP"
 
-#: ../../printerdrake.pm_.c:3451 ../../printerdrake.pm_.c:3537
+#: ../../printerdrake.pm_.c:3470 ../../printerdrake.pm_.c:3556
 msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
 msgstr "Odebrat tiskárnu ze Star Office/OpenOffice.org/GIMP"
 
-#: ../../printerdrake.pm_.c:3452 ../../printerdrake.pm_.c:3546
+#: ../../printerdrake.pm_.c:3471 ../../printerdrake.pm_.c:3565
 msgid "Print test pages"
 msgstr "Tisk testovacích stránek"
 
-#: ../../printerdrake.pm_.c:3453 ../../printerdrake.pm_.c:3548
+#: ../../printerdrake.pm_.c:3472 ../../printerdrake.pm_.c:3567
 msgid "Know how to use this printer"
 msgstr "Nápověda pro tisk na této tiskárně"
 
-#: ../../printerdrake.pm_.c:3455 ../../printerdrake.pm_.c:3550
+#: ../../printerdrake.pm_.c:3474 ../../printerdrake.pm_.c:3569
 msgid "Remove printer"
 msgstr "Odebrat tiskárnu"
 
-#: ../../printerdrake.pm_.c:3501
+#: ../../printerdrake.pm_.c:3520
 #, c-format
 msgid "Removing old printer \"%s\"..."
 msgstr "Odebírám starou tiskárnu \"%s\"..."
 
-#: ../../printerdrake.pm_.c:3526
+#: ../../printerdrake.pm_.c:3545
 msgid "Default printer"
 msgstr "Výchozí tiskárna"
 
-#: ../../printerdrake.pm_.c:3527
+#: ../../printerdrake.pm_.c:3546
 #, c-format
 msgid "The printer \"%s\" is set as the default printer now."
 msgstr "Tiskárna \"%s\" je nyní nastavena jako výchozí."
 
-#: ../../printerdrake.pm_.c:3531 ../../printerdrake.pm_.c:3534
+#: ../../printerdrake.pm_.c:3550 ../../printerdrake.pm_.c:3553
 msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
 msgstr "Přidávám tiskárnu do Star Office/OpenOffice.org/GIMP"
 
-#: ../../printerdrake.pm_.c:3532
+#: ../../printerdrake.pm_.c:3551
 #, c-format
 msgid ""
 "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
 msgstr ""
 "Tiskárna \"%s\" byla úspěšně přidána do Star Office/OpenOffice.org/GIMP."
 
-#: ../../printerdrake.pm_.c:3535
+#: ../../printerdrake.pm_.c:3554
 #, c-format
 msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
 msgstr ""
 "Přidání tiskárny \"%s\" do Star Office/OpenOffice.org/GIMP se nezdařilo."
 
-#: ../../printerdrake.pm_.c:3540 ../../printerdrake.pm_.c:3543
+#: ../../printerdrake.pm_.c:3559 ../../printerdrake.pm_.c:3562
 msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
 msgstr "Odebírám tiskárnu ze Star Office/OpenOffice.org/GIMP"
 
-#: ../../printerdrake.pm_.c:3541
+#: ../../printerdrake.pm_.c:3560
 #, c-format
 msgid ""
 "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
@@ -9782,19 +9777,19 @@ msgstr ""
 "Tiskárna \"%s\" byla úspěšně odebrána z aplikace Star Office/OpenOffice.org/"
 "GIMP."
 
-#: ../../printerdrake.pm_.c:3544
+#: ../../printerdrake.pm_.c:3563
 #, c-format
 msgid ""
 "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
 msgstr ""
 "Odebrání tiskárny \"%s\" ze Star Office/OpenOffice.org/GIMP se nezdařilo."
 
-#: ../../printerdrake.pm_.c:3552
+#: ../../printerdrake.pm_.c:3571
 #, c-format
 msgid "Do you really want to remove the printer \"%s\"?"
 msgstr "Chcete opravdu odebrat tiskárnu \"%s\"?"
 
-#: ../../printerdrake.pm_.c:3556
+#: ../../printerdrake.pm_.c:3575
 #, c-format
 msgid "Removing printer \"%s\"..."
 msgstr "Odebírám tiskárnu \"%s\"..."
@@ -10608,7 +10603,7 @@ msgstr ""
 "produktům získala konkurenční výhodu, pokud chcete podpořit vývoj distribuce "
 "Mandrake Linux, připojte se ke klubu MandrakeClub!"
 
-#: ../../standalone.pm_.c:41
+#: ../../standalone.pm_.c:42
 msgid "Installing packages..."
 msgstr "Instaluji balíčky..."
 
@@ -11856,7 +11851,7 @@ msgid "Previous"
 msgstr "Předchozí"
 
 #: ../../standalone/drakbackup_.c:3941 ../../standalone/drakbackup_.c:4027
-#: ../../standalone/logdrake_.c:223
+#: ../../standalone/logdrake_.c:224
 msgid "Save"
 msgstr "Uložit"
 
@@ -12751,93 +12746,93 @@ msgstr "Ethernetová karta"
 msgid "DHCP Client"
 msgstr "DHCP klient"
 
-#: ../../standalone/drakfloppy_.c:63
+#: ../../standalone/drakfloppy_.c:64
 msgid "usage: drakfloppy\n"
 msgstr "použití: drakfloppy\n"
 
-#: ../../standalone/drakfloppy_.c:67
+#: ../../standalone/drakfloppy_.c:68
 msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
 msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-iso8859-2,*"
 
-#: ../../standalone/drakfloppy_.c:68
+#: ../../standalone/drakfloppy_.c:69
 msgid "Module name"
 msgstr "Název modulu"
 
-#: ../../standalone/drakfloppy_.c:68
+#: ../../standalone/drakfloppy_.c:69
 msgid "Size"
 msgstr "Velikost"
 
-#: ../../standalone/drakfloppy_.c:73
+#: ../../standalone/drakfloppy_.c:74
 msgid "drakfloppy"
 msgstr "drakfloppy"
 
-#: ../../standalone/drakfloppy_.c:90
+#: ../../standalone/drakfloppy_.c:91
 msgid "boot disk creation"
 msgstr "vytváření zaváděcích disket"
 
-#: ../../standalone/drakfloppy_.c:98 ../../standalone/drakfloppy_.c:111
+#: ../../standalone/drakfloppy_.c:99 ../../standalone/drakfloppy_.c:112
 msgid "default"
 msgstr "předvolené"
 
-#: ../../standalone/drakfloppy_.c:114
+#: ../../standalone/drakfloppy_.c:115
 #, c-format
 msgid "DrakFloppy Error: %s"
 msgstr "Chyba DrakFloppy: %s"
 
-#: ../../standalone/drakfloppy_.c:125
+#: ../../standalone/drakfloppy_.c:126
 msgid "kernel version"
 msgstr "verze jádra"
 
-#: ../../standalone/drakfloppy_.c:131
+#: ../../standalone/drakfloppy_.c:132
 msgid "General"
 msgstr "Obecné"
 
-#: ../../standalone/drakfloppy_.c:136
+#: ../../standalone/drakfloppy_.c:137
 msgid "Expert Area"
 msgstr "Expertní nastavení"
 
-#: ../../standalone/drakfloppy_.c:139
+#: ../../standalone/drakfloppy_.c:140
 msgid "mkinitrd optional arguments"
 msgstr "volitelné argumenty pro mkinitrd"
 
-#: ../../standalone/drakfloppy_.c:140
+#: ../../standalone/drakfloppy_.c:141
 msgid "Add a module"
 msgstr "Přidat modul"
 
-#: ../../standalone/drakfloppy_.c:160
+#: ../../standalone/drakfloppy_.c:161
 msgid "force"
 msgstr "vnutit"
 
-#: ../../standalone/drakfloppy_.c:161
+#: ../../standalone/drakfloppy_.c:162
 msgid "if needed"
 msgstr "pokud je potřeba"
 
-#: ../../standalone/drakfloppy_.c:162
+#: ../../standalone/drakfloppy_.c:163
 msgid "omit scsi modules"
 msgstr "vynechat SCSI moduly"
 
-#: ../../standalone/drakfloppy_.c:163
+#: ../../standalone/drakfloppy_.c:164
 msgid "omit raid modules"
 msgstr "vynechat RAID moduly"
 
-#: ../../standalone/drakfloppy_.c:199
+#: ../../standalone/drakfloppy_.c:200
 msgid "Remove a module"
 msgstr "Odebrat modul"
 
-#: ../../standalone/drakfloppy_.c:221
+#: ../../standalone/drakfloppy_.c:222
 msgid "Output"
 msgstr "Výstup"
 
-#: ../../standalone/drakfloppy_.c:233
+#: ../../standalone/drakfloppy_.c:234
 msgid "Build the disk"
 msgstr "Vytvořit disk"
 
-#: ../../standalone/drakfloppy_.c:376
+#: ../../standalone/drakfloppy_.c:377
 #, c-format
 msgid "Be sure a media is present for the device %s"
 msgstr "Zkontrolujte, zda v je zařízení %s vloženo médium"
 
-#: ../../standalone/drakfloppy_.c:381
+#: ../../standalone/drakfloppy_.c:382
 #, c-format
 msgid ""
 "There is no medium or it is write-protected for device %s.\n"
@@ -12846,12 +12841,12 @@ msgstr ""
 "V zařízení %s není žádné médium, nebo je médium chráněno proti zápisu.\n"
 "Vložte prosím nějaké."
 
-#: ../../standalone/drakfloppy_.c:383
+#: ../../standalone/drakfloppy_.c:384
 #, c-format
 msgid "Unable to fork: %s"
 msgstr "Nelze provést fork: %s"
 
-#: ../../standalone/drakfloppy_.c:387
+#: ../../standalone/drakfloppy_.c:388
 #, c-format
 msgid ""
 "Unable to close properly mkbootdisk: \n"
@@ -13829,128 +13824,128 @@ msgstr "Nelze spustit aktualizaci na běžící systém !!!\n"
 msgid "The change is done, but to be effective you must logout"
 msgstr "Změny jsou provedeny, ale pro aktivaci je nutné provést odhlášení"
 
-#: ../../standalone/logdrake_.c:85 ../../ugtk.pm_.c:285
+#: ../../standalone/logdrake_.c:86 ../../ugtk.pm_.c:285
 msgid "logdrake"
 msgstr "logdrake"
 
-#: ../../standalone/logdrake_.c:95
+#: ../../standalone/logdrake_.c:96
 msgid "Show only for the selected day"
 msgstr "Zobrazit pouze pro vybraný den"
 
-#: ../../standalone/logdrake_.c:102
+#: ../../standalone/logdrake_.c:103
 msgid "/File/_New"
 msgstr "/Soubor/_Nový"
 
-#: ../../standalone/logdrake_.c:102
+#: ../../standalone/logdrake_.c:103
 msgid "<control>N"
 msgstr "<control>N"
 
-#: ../../standalone/logdrake_.c:103
+#: ../../standalone/logdrake_.c:104
 msgid "/File/_Open"
 msgstr "/Soubor/_Otevřít"
 
-#: ../../standalone/logdrake_.c:103
+#: ../../standalone/logdrake_.c:104
 msgid "<control>O"
 msgstr "<control>O"
 
-#: ../../standalone/logdrake_.c:104
+#: ../../standalone/logdrake_.c:105
 msgid "/File/_Save"
 msgstr "/Soubor/_Uložit"
 
-#: ../../standalone/logdrake_.c:104
+#: ../../standalone/logdrake_.c:105
 msgid "<control>S"
 msgstr "<control>U"
 
-#: ../../standalone/logdrake_.c:105
+#: ../../standalone/logdrake_.c:106
 msgid "/File/Save _As"
 msgstr "/Soubor/Uložit _jako"
 
-#: ../../standalone/logdrake_.c:106
+#: ../../standalone/logdrake_.c:107
 msgid "/File/-"
 msgstr "/Soubor/-"
 
-#: ../../standalone/logdrake_.c:108
+#: ../../standalone/logdrake_.c:109
 msgid "/_Options"
 msgstr "/_Volby"
 
-#: ../../standalone/logdrake_.c:109
+#: ../../standalone/logdrake_.c:110
 msgid "/Options/Test"
 msgstr "/Volby/Test"
 
-#: ../../standalone/logdrake_.c:111
+#: ../../standalone/logdrake_.c:112
 msgid "/Help/_About..."
 msgstr "/Nápověda/_O aplikaci..."
 
-#: ../../standalone/logdrake_.c:118
+#: ../../standalone/logdrake_.c:119
 msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
 msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-iso8859-2,*"
 
-#: ../../standalone/logdrake_.c:119
+#: ../../standalone/logdrake_.c:120
 msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
 msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-iso8859-2,*"
 
-#: ../../standalone/logdrake_.c:173
+#: ../../standalone/logdrake_.c:174
 msgid "User"
 msgstr "Uživatel"
 
-#: ../../standalone/logdrake_.c:174
+#: ../../standalone/logdrake_.c:175
 msgid "Messages"
 msgstr "Zprávy"
 
-#: ../../standalone/logdrake_.c:175
+#: ../../standalone/logdrake_.c:176
 msgid "Syslog"
 msgstr "Syslog"
 
-#: ../../standalone/logdrake_.c:176
+#: ../../standalone/logdrake_.c:177
 msgid "Mandrake Tools Explanations"
 msgstr "Vysvětlivky nástrojů Mandrake Linuxu"
 
-#: ../../standalone/logdrake_.c:179
+#: ../../standalone/logdrake_.c:180
 msgid "search"
 msgstr "vyhledat"
 
-#: ../../standalone/logdrake_.c:185
+#: ../../standalone/logdrake_.c:186
 msgid "A tool to monitor your logs"
 msgstr "Nástroj na sledování logů"
 
-#: ../../standalone/logdrake_.c:186
+#: ../../standalone/logdrake_.c:187
 msgid "Settings"
 msgstr "Nastavení"
 
-#: ../../standalone/logdrake_.c:191
+#: ../../standalone/logdrake_.c:192
 msgid "matching"
 msgstr "shodných"
 
-#: ../../standalone/logdrake_.c:192
+#: ../../standalone/logdrake_.c:193
 msgid "but not matching"
 msgstr "neshodných"
 
-#: ../../standalone/logdrake_.c:196
+#: ../../standalone/logdrake_.c:197
 msgid "Choose file"
 msgstr "Vyberte soubor"
 
-#: ../../standalone/logdrake_.c:201
+#: ../../standalone/logdrake_.c:202
 msgid "Calendar"
 msgstr "Kalendář"
 
-#: ../../standalone/logdrake_.c:211
+#: ../../standalone/logdrake_.c:212
 msgid "Content of the file"
 msgstr "Obsah souboru"
 
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:391
+#: ../../standalone/logdrake_.c:216 ../../standalone/logdrake_.c:392
 msgid "Mail alert"
 msgstr "Varovné zprávy e-mailem"
 
-#: ../../standalone/logdrake_.c:267
+#: ../../standalone/logdrake_.c:268
 #, c-format
 msgid "please wait, parsing file: %s"
 msgstr "čekejte prosím, zpracovávám soubor: %s"
 
-#: ../../standalone/logdrake_.c:408
+#: ../../standalone/logdrake_.c:409
 msgid "Mail alert configuration"
 msgstr "Nastavení varovných zpráv e-mailem"
 
-#: ../../standalone/logdrake_.c:409
+#: ../../standalone/logdrake_.c:410
 msgid ""
 "Welcome to the mail configuration utility.\n"
 "\n"
@@ -13960,64 +13955,64 @@ msgstr ""
 "\n"
 "Zde lze nastavit systém posílání varovných zpráv.\n"
 
-#: ../../standalone/logdrake_.c:416
+#: ../../standalone/logdrake_.c:417
 msgid "Apache World Wide Web Server"
 msgstr "Server pro World Wide Web Apache"
 
-#: ../../standalone/logdrake_.c:417
+#: ../../standalone/logdrake_.c:418
 msgid "Domain Name Resolver"
 msgstr "Dekodér názvu domény"
 
-#: ../../standalone/logdrake_.c:418
+#: ../../standalone/logdrake_.c:419
 msgid "Ftp Server"
 msgstr "Server FTP"
 
-#: ../../standalone/logdrake_.c:419
+#: ../../standalone/logdrake_.c:420
 msgid "Postfix Mail Server"
 msgstr "Poštovní server Postfix"
 
-#: ../../standalone/logdrake_.c:420
+#: ../../standalone/logdrake_.c:421
 msgid "Samba Server"
 msgstr "Server Samba"
 
-#: ../../standalone/logdrake_.c:421
+#: ../../standalone/logdrake_.c:422
 msgid "SSH Server"
 msgstr "Server SSH"
 
-#: ../../standalone/logdrake_.c:422
+#: ../../standalone/logdrake_.c:423
 msgid "Webmin Service"
 msgstr "Služba Webmin"
 
-#: ../../standalone/logdrake_.c:423
+#: ../../standalone/logdrake_.c:424
 msgid "Xinetd Service"
 msgstr "Služba Xinetd"
 
-#: ../../standalone/logdrake_.c:430
+#: ../../standalone/logdrake_.c:431
 msgid "service setting"
 msgstr "nastavení služeb"
 
-#: ../../standalone/logdrake_.c:431
+#: ../../standalone/logdrake_.c:432
 msgid ""
 "You will receive an alert if one of the selected services is no more running"
 msgstr "Pokud jedna z vybraných služeb nepoběží, obdržíte varovnou zprávu"
 
-#: ../../standalone/logdrake_.c:443
+#: ../../standalone/logdrake_.c:444
 msgid "load setting"
 msgstr "nahrát volby"
 
-#: ../../standalone/logdrake_.c:444
+#: ../../standalone/logdrake_.c:445
 msgid "You will receive an alert if the load is higher than this value"
 msgstr "Pokud bude hodnota vetší než zadané číslo, obdržíte varovnou zprávu"
 
-#: ../../standalone/logdrake_.c:457
+#: ../../standalone/logdrake_.c:458
 msgid "alert configuration"
 msgstr "nastavení varování"
 
-#: ../../standalone/logdrake_.c:458
+#: ../../standalone/logdrake_.c:459
 msgid "Please enter your email address below "
 msgstr "Zadejte prosím níže svou poštovní adresu "
 
-#: ../../standalone/logdrake_.c:497
+#: ../../standalone/logdrake_.c:498
 msgid "Save as.."
 msgstr "Uložit jako..."