- perl -pi -e 's!Hard drive!Hard disk drive!' (except install/steps_list.pm)

144 files changed, 366 insertions, 366 deletions

diff --git a/perl-install/install/help/help.pm b/perl-install/install/help/help.pm
index a60aec02f..2182bf63d 100644
--- a/perl-install/install/help/help.pm
+++ b/perl-install/install/help/help.pm
@@ -67,10 +67,10 @@ Each partition is listed as follows: \"Name\", \"Capacity\".
 \"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",
 \"partition number\" (for example, \"hda1\").
 
-\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and
+\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and
 \"sd\" if it is a SCSI hard disk drive.
 
-\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE
+\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE
 hard disk drives:
 
  * \"a\" means \"master hard disk drive on the primary IDE controller\";
@@ -536,10 +536,10 @@ Each partition is listed as follows: \"Linux name\", \"Windows name\"
 \"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",
 \"partition number\" (for example, \"hda1\").
 
-\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and
+\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and
 \"sd\" if it is a SCSI hard disk drive.
 
-\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE
+\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE
 hard disk drives:
 
  * \"a\" means \"master hard disk drive on the primary IDE controller\";
diff --git a/perl-install/install/help/po/DrakX-help.pot b/perl-install/install/help/po/DrakX-help.pot
index 81f958daa..a6ed2b546 100644
--- a/perl-install/install/help/po/DrakX-help.pot
+++ b/perl-install/install/help/po/DrakX-help.pot
@@ -97,10 +97,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -731,10 +731,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/af.po b/perl-install/install/help/po/af.po
index 2daeb34ab..b497979c8 100644
--- a/perl-install/install/help/po/af.po
+++ b/perl-install/install/help/po/af.po
@@ -152,10 +152,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1190,10 +1190,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/am.po b/perl-install/install/help/po/am.po
index 2f4109a61..337ee9d3c 100644
--- a/perl-install/install/help/po/am.po
+++ b/perl-install/install/help/po/am.po
@@ -95,10 +95,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -727,10 +727,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ar.po b/perl-install/install/help/po/ar.po
index a5275911a..53dd78910 100644
--- a/perl-install/install/help/po/ar.po
+++ b/perl-install/install/help/po/ar.po
@@ -144,10 +144,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1215,10 +1215,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/az.po b/perl-install/install/help/po/az.po
index 06e5f3ba0..68e7a1c61 100644
--- a/perl-install/install/help/po/az.po
+++ b/perl-install/install/help/po/az.po
@@ -153,10 +153,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1260,10 +1260,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/be.po b/perl-install/install/help/po/be.po
index 8e8e18c45..bb0cdb594 100644
--- a/perl-install/install/help/po/be.po
+++ b/perl-install/install/help/po/be.po
@@ -95,10 +95,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -727,10 +727,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/bg.po b/perl-install/install/help/po/bg.po
index d503d120c..7dbff4499 100644
--- a/perl-install/install/help/po/bg.po
+++ b/perl-install/install/help/po/bg.po
@@ -150,10 +150,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1131,10 +1131,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/bn.po b/perl-install/install/help/po/bn.po
index 4f4a57921..0322733c7 100644
--- a/perl-install/install/help/po/bn.po
+++ b/perl-install/install/help/po/bn.po
@@ -148,10 +148,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1037,10 +1037,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/br.po b/perl-install/install/help/po/br.po
index bb90f6ca5..489c655df 100644
--- a/perl-install/install/help/po/br.po
+++ b/perl-install/install/help/po/br.po
@@ -97,10 +97,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -737,10 +737,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/bs.po b/perl-install/install/help/po/bs.po
index 0ed9bd845..20f6339fd 100644
--- a/perl-install/install/help/po/bs.po
+++ b/perl-install/install/help/po/bs.po
@@ -151,10 +151,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1239,10 +1239,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ca.po b/perl-install/install/help/po/ca.po
index e9b1cb8f8..a2e3d12fd 100644
--- a/perl-install/install/help/po/ca.po
+++ b/perl-install/install/help/po/ca.po
@@ -158,10 +158,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1260,10 +1260,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/cs.po b/perl-install/install/help/po/cs.po
index 201707577..a7070ca8b 100644
--- a/perl-install/install/help/po/cs.po
+++ b/perl-install/install/help/po/cs.po
@@ -142,10 +142,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1231,10 +1231,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/cy.po b/perl-install/install/help/po/cy.po
index 06e8f7f1e..3c5296b15 100644
--- a/perl-install/install/help/po/cy.po
+++ b/perl-install/install/help/po/cy.po
@@ -148,10 +148,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1188,10 +1188,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/da.po b/perl-install/install/help/po/da.po
index 656b3cd21..865e30874 100644
--- a/perl-install/install/help/po/da.po
+++ b/perl-install/install/help/po/da.po
@@ -145,10 +145,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1214,10 +1214,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/de.po b/perl-install/install/help/po/de.po
index 99f809a5d..28388283e 100644
--- a/perl-install/install/help/po/de.po
+++ b/perl-install/install/help/po/de.po
@@ -153,10 +153,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1276,10 +1276,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/el.po b/perl-install/install/help/po/el.po
index c8bdd993d..d3f6566d5 100644
--- a/perl-install/install/help/po/el.po
+++ b/perl-install/install/help/po/el.po
@@ -140,10 +140,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1200,10 +1200,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/eo.po b/perl-install/install/help/po/eo.po
index 6a929c56a..5e1e4e5b8 100644
--- a/perl-install/install/help/po/eo.po
+++ b/perl-install/install/help/po/eo.po
@@ -148,10 +148,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1263,10 +1263,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/es.po b/perl-install/install/help/po/es.po
index f2b8a92a0..4bf27acee 100644
--- a/perl-install/install/help/po/es.po
+++ b/perl-install/install/help/po/es.po
@@ -153,10 +153,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1290,10 +1290,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/et.po b/perl-install/install/help/po/et.po
index 979459604..bbf9e3cac 100644
--- a/perl-install/install/help/po/et.po
+++ b/perl-install/install/help/po/et.po
@@ -143,10 +143,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1243,10 +1243,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/eu.po b/perl-install/install/help/po/eu.po
index ea34a69b4..0b1dc798b 100644
--- a/perl-install/install/help/po/eu.po
+++ b/perl-install/install/help/po/eu.po
@@ -146,10 +146,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1266,10 +1266,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/fa.po b/perl-install/install/help/po/fa.po
index a1825092e..0ca028505 100644
--- a/perl-install/install/help/po/fa.po
+++ b/perl-install/install/help/po/fa.po
@@ -145,10 +145,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1226,10 +1226,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/fi.po b/perl-install/install/help/po/fi.po
index 5ad859ce0..0cbd4f197 100644
--- a/perl-install/install/help/po/fi.po
+++ b/perl-install/install/help/po/fi.po
@@ -143,10 +143,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1219,10 +1219,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/fr.po b/perl-install/install/help/po/fr.po
index ab9c8046e..5eb50848f 100644
--- a/perl-install/install/help/po/fr.po
+++ b/perl-install/install/help/po/fr.po
@@ -208,10 +208,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1323,10 +1323,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/fur.po b/perl-install/install/help/po/fur.po
index 1ac5a3d6c..f199dceec 100644
--- a/perl-install/install/help/po/fur.po
+++ b/perl-install/install/help/po/fur.po
@@ -97,10 +97,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -729,10 +729,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ga.po b/perl-install/install/help/po/ga.po
index cf6fa9d88..75d769a72 100644
--- a/perl-install/install/help/po/ga.po
+++ b/perl-install/install/help/po/ga.po
@@ -94,10 +94,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -726,10 +726,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/gl.po b/perl-install/install/help/po/gl.po
index 5e39caf0f..1dd690d63 100644
--- a/perl-install/install/help/po/gl.po
+++ b/perl-install/install/help/po/gl.po
@@ -140,10 +140,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1230,10 +1230,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/he.po b/perl-install/install/help/po/he.po
index d8090b97b..7b492c2a4 100644
--- a/perl-install/install/help/po/he.po
+++ b/perl-install/install/help/po/he.po
@@ -146,10 +146,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1212,10 +1212,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/hi.po b/perl-install/install/help/po/hi.po
index 064469ef9..7f68c3f4a 100644
--- a/perl-install/install/help/po/hi.po
+++ b/perl-install/install/help/po/hi.po
@@ -145,10 +145,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1015,10 +1015,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/hr.po b/perl-install/install/help/po/hr.po
index 0455c242f..206b62942 100644
--- a/perl-install/install/help/po/hr.po
+++ b/perl-install/install/help/po/hr.po
@@ -136,10 +136,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1190,10 +1190,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/hu.po b/perl-install/install/help/po/hu.po
index b12826d15..76c5c5721 100644
--- a/perl-install/install/help/po/hu.po
+++ b/perl-install/install/help/po/hu.po
@@ -144,10 +144,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1246,10 +1246,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/id.po b/perl-install/install/help/po/id.po
index d32206e6d..9ce92e824 100644
--- a/perl-install/install/help/po/id.po
+++ b/perl-install/install/help/po/id.po
@@ -153,10 +153,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1282,10 +1282,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/is.po b/perl-install/install/help/po/is.po
index b6a06c2b6..210b0f517 100644
--- a/perl-install/install/help/po/is.po
+++ b/perl-install/install/help/po/is.po
@@ -147,10 +147,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1227,10 +1227,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/it.po b/perl-install/install/help/po/it.po
index 224d80632..790bbce75 100644
--- a/perl-install/install/help/po/it.po
+++ b/perl-install/install/help/po/it.po
@@ -149,10 +149,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1307,10 +1307,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ja.po b/perl-install/install/help/po/ja.po
index 64836aea3..15656ed6a 100644
--- a/perl-install/install/help/po/ja.po
+++ b/perl-install/install/help/po/ja.po
@@ -136,10 +136,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1176,10 +1176,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ko.po b/perl-install/install/help/po/ko.po
index 1a89f07a8..5c50d5892 100644
--- a/perl-install/install/help/po/ko.po
+++ b/perl-install/install/help/po/ko.po
@@ -102,10 +102,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1021,10 +1021,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ky.po b/perl-install/install/help/po/ky.po
index d5b61ccf6..a7a555631 100644
--- a/perl-install/install/help/po/ky.po
+++ b/perl-install/install/help/po/ky.po
@@ -141,10 +141,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1148,10 +1148,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/lt.po b/perl-install/install/help/po/lt.po
index c2be6bb72..434c94cca 100644
--- a/perl-install/install/help/po/lt.po
+++ b/perl-install/install/help/po/lt.po
@@ -96,10 +96,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -942,10 +942,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ltg.po b/perl-install/install/help/po/ltg.po
index 81512fceb..cf57d4bd6 100644
--- a/perl-install/install/help/po/ltg.po
+++ b/perl-install/install/help/po/ltg.po
@@ -101,10 +101,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -942,10 +942,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/lv.po b/perl-install/install/help/po/lv.po
index 111af33d9..fed5ce4ef 100644
--- a/perl-install/install/help/po/lv.po
+++ b/perl-install/install/help/po/lv.po
@@ -103,10 +103,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -941,10 +941,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/mk.po b/perl-install/install/help/po/mk.po
index ee58e5f1e..2acdde2d9 100644
--- a/perl-install/install/help/po/mk.po
+++ b/perl-install/install/help/po/mk.po
@@ -151,10 +151,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1291,10 +1291,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/mn.po b/perl-install/install/help/po/mn.po
index bb6a1c0a9..4fcbd4227 100644
--- a/perl-install/install/help/po/mn.po
+++ b/perl-install/install/help/po/mn.po
@@ -99,10 +99,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -772,10 +772,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ms.po b/perl-install/install/help/po/ms.po
index d55a1c374..17b9ed9e2 100644
--- a/perl-install/install/help/po/ms.po
+++ b/perl-install/install/help/po/ms.po
@@ -99,10 +99,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -794,10 +794,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/mt.po b/perl-install/install/help/po/mt.po
index b62e189a8..42e7067d1 100644
--- a/perl-install/install/help/po/mt.po
+++ b/perl-install/install/help/po/mt.po
@@ -136,10 +136,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1208,10 +1208,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/nb.po b/perl-install/install/help/po/nb.po
index 7fe2b9dc9..8d8dd6ccd 100644
--- a/perl-install/install/help/po/nb.po
+++ b/perl-install/install/help/po/nb.po
@@ -159,10 +159,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1293,10 +1293,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/nl.po b/perl-install/install/help/po/nl.po
index 8d2ba4a3c..e8e2bd403 100644
--- a/perl-install/install/help/po/nl.po
+++ b/perl-install/install/help/po/nl.po
@@ -149,10 +149,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1276,10 +1276,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/nn.po b/perl-install/install/help/po/nn.po
index 6642318e0..8b7b7c81f 100644
--- a/perl-install/install/help/po/nn.po
+++ b/perl-install/install/help/po/nn.po
@@ -153,10 +153,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1207,10 +1207,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/pa_IN.po b/perl-install/install/help/po/pa_IN.po
index 198badb64..5036fb640 100644
--- a/perl-install/install/help/po/pa_IN.po
+++ b/perl-install/install/help/po/pa_IN.po
@@ -103,10 +103,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -760,10 +760,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/pl.po b/perl-install/install/help/po/pl.po
index d118f0eb4..000c6ebc4 100644
--- a/perl-install/install/help/po/pl.po
+++ b/perl-install/install/help/po/pl.po
@@ -149,10 +149,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1251,10 +1251,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/pt.po b/perl-install/install/help/po/pt.po
index db198a229..267f62ee1 100644
--- a/perl-install/install/help/po/pt.po
+++ b/perl-install/install/help/po/pt.po
@@ -152,10 +152,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1238,10 +1238,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/pt_BR.po b/perl-install/install/help/po/pt_BR.po
index 63f6f364c..92861c236 100644
--- a/perl-install/install/help/po/pt_BR.po
+++ b/perl-install/install/help/po/pt_BR.po
@@ -160,10 +160,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1282,10 +1282,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ro.po b/perl-install/install/help/po/ro.po
index 0a6b5c99f..9a48dc4dd 100644
--- a/perl-install/install/help/po/ro.po
+++ b/perl-install/install/help/po/ro.po
@@ -101,10 +101,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -733,10 +733,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ru.po b/perl-install/install/help/po/ru.po
index 67aba145b..770e3faaa 100644
--- a/perl-install/install/help/po/ru.po
+++ b/perl-install/install/help/po/ru.po
@@ -143,10 +143,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -174,7 +174,7 @@ msgstr ""
 "\"Название\" разделяется на: \"тип жесткого диска\", \"номер жесткого\n"
 "диска\", \"номер раздела\" (например, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" это \"hd\", если ваш жесткий диск IDE и \"sd\", если он\n"
+"\"Hard disk drive type\" это \"hd\", если ваш жесткий диск IDE и \"sd\", если он\n"
 "SCSI.\n"
 "\n"
 "\"Номер жесткого диска\" всегда является буквой после \"hd\" или \"sd\".\n"
@@ -1240,10 +1240,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/sc.po b/perl-install/install/help/po/sc.po
index 9be661ec6..24059e258 100644
--- a/perl-install/install/help/po/sc.po
+++ b/perl-install/install/help/po/sc.po
@@ -97,10 +97,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -729,10 +729,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/sk.po b/perl-install/install/help/po/sk.po
index 0144c4318..177fcc2dd 100644
--- a/perl-install/install/help/po/sk.po
+++ b/perl-install/install/help/po/sk.po
@@ -143,10 +143,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1273,10 +1273,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/sl.po b/perl-install/install/help/po/sl.po
index e25ba3aae..c5090e97e 100644
--- a/perl-install/install/help/po/sl.po
+++ b/perl-install/install/help/po/sl.po
@@ -150,10 +150,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1224,10 +1224,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/sq.po b/perl-install/install/help/po/sq.po
index 51772db19..92a0455b1 100644
--- a/perl-install/install/help/po/sq.po
+++ b/perl-install/install/help/po/sq.po
@@ -145,10 +145,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1242,10 +1242,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/sr.po b/perl-install/install/help/po/sr.po
index daa320f62..c0a8a192e 100644
--- a/perl-install/install/help/po/sr.po
+++ b/perl-install/install/help/po/sr.po
@@ -149,10 +149,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1279,10 +1279,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/sr@Latn.po b/perl-install/install/help/po/sr@Latn.po
index 94bf1c5b7..147fa9245 100644
--- a/perl-install/install/help/po/sr@Latn.po
+++ b/perl-install/install/help/po/sr@Latn.po
@@ -151,10 +151,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1284,10 +1284,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/sv.po b/perl-install/install/help/po/sv.po
index 328440b41..b69e3ea27 100644
--- a/perl-install/install/help/po/sv.po
+++ b/perl-install/install/help/po/sv.po
@@ -148,10 +148,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1235,10 +1235,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ta.po b/perl-install/install/help/po/ta.po
index 609b696ad..60f031e31 100644
--- a/perl-install/install/help/po/ta.po
+++ b/perl-install/install/help/po/ta.po
@@ -133,10 +133,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -164,10 +164,10 @@ msgstr ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1067,10 +1067,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1098,10 +1098,10 @@ msgstr ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/tg.po b/perl-install/install/help/po/tg.po
index d0a283436..415cba967 100644
--- a/perl-install/install/help/po/tg.po
+++ b/perl-install/install/help/po/tg.po
@@ -156,10 +156,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1295,10 +1295,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/th.po b/perl-install/install/help/po/th.po
index 4d546b0ff..e2f4a4384 100644
--- a/perl-install/install/help/po/th.po
+++ b/perl-install/install/help/po/th.po
@@ -97,10 +97,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -729,10 +729,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/tl.po b/perl-install/install/help/po/tl.po
index c1602ea14..b17744a07 100644
--- a/perl-install/install/help/po/tl.po
+++ b/perl-install/install/help/po/tl.po
@@ -154,10 +154,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1313,10 +1313,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/tr.po b/perl-install/install/help/po/tr.po
index ebf9a6772..90138caff 100644
--- a/perl-install/install/help/po/tr.po
+++ b/perl-install/install/help/po/tr.po
@@ -143,10 +143,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1168,10 +1168,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/uk.po b/perl-install/install/help/po/uk.po
index 08ff66fcb..042c2ace7 100644
--- a/perl-install/install/help/po/uk.po
+++ b/perl-install/install/help/po/uk.po
@@ -146,10 +146,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1236,10 +1236,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/uz.po b/perl-install/install/help/po/uz.po
index 03ff0d14e..c15043d7b 100644
--- a/perl-install/install/help/po/uz.po
+++ b/perl-install/install/help/po/uz.po
@@ -101,10 +101,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -749,10 +749,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/uz@cyrillic.po b/perl-install/install/help/po/uz@cyrillic.po
index 38a7af057..17ca71694 100644
--- a/perl-install/install/help/po/uz@cyrillic.po
+++ b/perl-install/install/help/po/uz@cyrillic.po
@@ -101,10 +101,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -748,10 +748,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/vi.po b/perl-install/install/help/po/vi.po
index bc530d27b..17ca0f116 100644
--- a/perl-install/install/help/po/vi.po
+++ b/perl-install/install/help/po/vi.po
@@ -134,10 +134,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1196,10 +1196,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/wa.po b/perl-install/install/help/po/wa.po
index abc7c5aa4..338c84c25 100644
--- a/perl-install/install/help/po/wa.po
+++ b/perl-install/install/help/po/wa.po
@@ -146,10 +146,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1267,10 +1267,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/zh_CN.po b/perl-install/install/help/po/zh_CN.po
index 14cdc89d6..a98830d47 100644
--- a/perl-install/install/help/po/zh_CN.po
+++ b/perl-install/install/help/po/zh_CN.po
@@ -129,10 +129,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1136,10 +1136,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/zh_TW.po b/perl-install/install/help/po/zh_TW.po
index 16c1b495b..8f3015920 100644
--- a/perl-install/install/help/po/zh_TW.po
+++ b/perl-install/install/help/po/zh_TW.po
@@ -142,10 +142,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1045,10 +1045,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/share/po/DrakX.pot b/perl-install/install/share/po/DrakX.pot
index 7ab20df2f..5b6ae262e 100644
--- a/perl-install/install/share/po/DrakX.pot
+++ b/perl-install/install/share/po/DrakX.pot
@@ -1350,7 +1350,7 @@ msgstr ""
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr ""
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/af.po b/perl-install/install/share/po/af.po
index 2776bb5be..26f6b2ef3 100644
--- a/perl-install/install/share/po/af.po
+++ b/perl-install/install/share/po/af.po
@@ -1440,7 +1440,7 @@ msgstr "Muis"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Hardeskyf-speuring."
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/am.po b/perl-install/install/share/po/am.po
index 3fd5d8d56..7ae2bcbb0 100644
--- a/perl-install/install/share/po/am.po
+++ b/perl-install/install/share/po/am.po
@@ -1368,7 +1368,7 @@ msgstr "መጠቆሚያ"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr ""
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/ar.po b/perl-install/install/share/po/ar.po
index 251a41493..95db5d075 100644
--- a/perl-install/install/share/po/ar.po
+++ b/perl-install/install/share/po/ar.po
@@ -1446,7 +1446,7 @@ msgstr "الفأرة"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "اكتشاف القرص الصّلب"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/ast.po b/perl-install/install/share/po/ast.po
index 4974cdca3..110c8456c 100644
--- a/perl-install/install/share/po/ast.po
+++ b/perl-install/install/share/po/ast.po
@@ -1466,7 +1466,7 @@ msgstr "Mur"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Deteición del discu duru"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/az.po b/perl-install/install/share/po/az.po
index 9b28547d1..08389c4ce 100644
--- a/perl-install/install/share/po/az.po
+++ b/perl-install/install/share/po/az.po
@@ -1432,7 +1432,7 @@ msgstr "Siçan"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Sabit disklərin aşkar edilməsi"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/be.po b/perl-install/install/share/po/be.po
index c138f35d5..1338e768d 100644
--- a/perl-install/install/share/po/be.po
+++ b/perl-install/install/share/po/be.po
@@ -1397,7 +1397,7 @@ msgstr "Мыш"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Вызначэнне жорсткага дыску"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/bg.po b/perl-install/install/share/po/bg.po
index c2b457043..c3e2c2333 100644
--- a/perl-install/install/share/po/bg.po
+++ b/perl-install/install/share/po/bg.po
@@ -1433,7 +1433,7 @@ msgstr "Мишка"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Засичане на дисковете"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/bn.po b/perl-install/install/share/po/bn.po
index ae181b955..5e6a88826 100644
--- a/perl-install/install/share/po/bn.po
+++ b/perl-install/install/share/po/bn.po
@@ -1440,7 +1440,7 @@ msgstr "মাউস"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "হার্ড ড্রাইভ সনাক্ত"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/br.po b/perl-install/install/share/po/br.po
index b5d32130f..3784732eb 100644
--- a/perl-install/install/share/po/br.po
+++ b/perl-install/install/share/po/br.po
@@ -1410,7 +1410,7 @@ msgstr "Logodenn"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Dinoiñ ar bladenn galet"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/bs.po b/perl-install/install/share/po/bs.po
index 65fd8405a..36075b959 100644
--- a/perl-install/install/share/po/bs.po
+++ b/perl-install/install/share/po/bs.po
@@ -1452,7 +1452,7 @@ msgstr "Miš"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Prepoznavanje hard diska"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/ca.po b/perl-install/install/share/po/ca.po
index 0fa97a138..c76f2be48 100644
--- a/perl-install/install/share/po/ca.po
+++ b/perl-install/install/share/po/ca.po
@@ -1445,7 +1445,7 @@ msgstr "Ratolí"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Detecció del disc dur"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/cs.po b/perl-install/install/share/po/cs.po
index 0068a0f1e..7d0666ee1 100644
--- a/perl-install/install/share/po/cs.po
+++ b/perl-install/install/share/po/cs.po
@@ -1458,7 +1458,7 @@ msgstr "Myš"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Detekce pevných disků"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/cy.po b/perl-install/install/share/po/cy.po
index 4b4ae514a..26a5e015d 100644
--- a/perl-install/install/share/po/cy.po
+++ b/perl-install/install/share/po/cy.po
@@ -1455,7 +1455,7 @@ msgstr "Llygoden"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Canfod disg caled"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/da.po b/perl-install/install/share/po/da.po
index 338f1f027..c0ed445d7 100644
--- a/perl-install/install/share/po/da.po
+++ b/perl-install/install/share/po/da.po
@@ -1465,7 +1465,7 @@ msgstr "Mus"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Harddisk-bestemmelse"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/de.po b/perl-install/install/share/po/de.po
index ddd354bf7..b174def1d 100644
--- a/perl-install/install/share/po/de.po
+++ b/perl-install/install/share/po/de.po
@@ -1479,7 +1479,7 @@ msgstr "Maus"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Festplatten suchen"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/el.po b/perl-install/install/share/po/el.po
index 56697691a..01efebc14 100644
--- a/perl-install/install/share/po/el.po
+++ b/perl-install/install/share/po/el.po
@@ -1483,7 +1483,7 @@ msgstr "Ποντίκι"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Εντοπισμός δίσκου"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/eo.po b/perl-install/install/share/po/eo.po
index 9b33843d9..82c48f25c 100644
--- a/perl-install/install/share/po/eo.po
+++ b/perl-install/install/share/po/eo.po
@@ -1453,7 +1453,7 @@ msgstr "Muso"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Detektado de fiksdisko(j)"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/es.po b/perl-install/install/share/po/es.po
index 19674ffbd..8a6449d67 100644
--- a/perl-install/install/share/po/es.po
+++ b/perl-install/install/share/po/es.po
@@ -1472,7 +1472,7 @@ msgstr "Ratón"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Detección del disco rígido"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/et.po b/perl-install/install/share/po/et.po
index bd3069906..f73e182d6 100644
--- a/perl-install/install/share/po/et.po
+++ b/perl-install/install/share/po/et.po
@@ -1447,7 +1447,7 @@ msgstr "Hiir"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Kõvaketta leidmine"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/eu.po b/perl-install/install/share/po/eu.po
index 94920b6ce..5eeb02d5b 100644
--- a/perl-install/install/share/po/eu.po
+++ b/perl-install/install/share/po/eu.po
@@ -1458,7 +1458,7 @@ msgstr "Sagua"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Disko zurrunen detekzioa"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/fa.po b/perl-install/install/share/po/fa.po
index 6acccff82..aa3b0c7c7 100644
--- a/perl-install/install/share/po/fa.po
+++ b/perl-install/install/share/po/fa.po
@@ -1429,7 +1429,7 @@ msgstr "موشی"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "شناسایی گرداننده‌ی دیسک"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/fi.po b/perl-install/install/share/po/fi.po
index e3a5a0ef7..0f51c0ef8 100644
--- a/perl-install/install/share/po/fi.po
+++ b/perl-install/install/share/po/fi.po
@@ -1477,7 +1477,7 @@ msgstr "Hiiri"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Kiintolevyjen tunnistus"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/fr.po b/perl-install/install/share/po/fr.po
index b6bb3caf8..086ea1b61 100644
--- a/perl-install/install/share/po/fr.po
+++ b/perl-install/install/share/po/fr.po
@@ -1547,7 +1547,7 @@ msgstr "Souris"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Détection des disques durs"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/fur.po b/perl-install/install/share/po/fur.po
index 494182a4e..3940d2b41 100644
--- a/perl-install/install/share/po/fur.po
+++ b/perl-install/install/share/po/fur.po
@@ -1371,7 +1371,7 @@ msgstr "Surie"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr ""
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/ga.po b/perl-install/install/share/po/ga.po
index 268b9f170..712be695f 100644
--- a/perl-install/install/share/po/ga.po
+++ b/perl-install/install/share/po/ga.po
@@ -1369,7 +1369,7 @@ msgstr "Luchóg"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr ""
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/gl.po b/perl-install/install/share/po/gl.po
index 0c1171fb7..0a2b54eec 100644
--- a/perl-install/install/share/po/gl.po
+++ b/perl-install/install/share/po/gl.po
@@ -1467,7 +1467,7 @@ msgstr "Rato"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Detección de discos duros"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/he.po b/perl-install/install/share/po/he.po
index f54817e54..f2500fa36 100644
--- a/perl-install/install/share/po/he.po
+++ b/perl-install/install/share/po/he.po
@@ -1435,7 +1435,7 @@ msgstr "עכבר"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "זיהוי כונן קשיח"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/hi.po b/perl-install/install/share/po/hi.po
index 14f3a2e76..740f2ad14 100644
--- a/perl-install/install/share/po/hi.po
+++ b/perl-install/install/share/po/hi.po
@@ -1427,7 +1427,7 @@ msgstr "माउस"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "हार्ड ड्राइव खोज"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/hr.po b/perl-install/install/share/po/hr.po
index f6802d3fd..6186b3851 100644
--- a/perl-install/install/share/po/hr.po
+++ b/perl-install/install/share/po/hr.po
@@ -1428,7 +1428,7 @@ msgstr "Miš"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Otkrivanje hard diskova"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/hu.po b/perl-install/install/share/po/hu.po
index b30440ac7..9a7e89dae 100644
--- a/perl-install/install/share/po/hu.po
+++ b/perl-install/install/share/po/hu.po
@@ -1484,7 +1484,7 @@ msgstr "Egér"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Merevlemez keresése"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/id.po b/perl-install/install/share/po/id.po
index 6ecf7fc18..1228c2b6d 100644
--- a/perl-install/install/share/po/id.po
+++ b/perl-install/install/share/po/id.po
@@ -1455,7 +1455,7 @@ msgstr "Mouse"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Deteksi hard disk"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/is.po b/perl-install/install/share/po/is.po
index 0d7c7f191..057402e0c 100644
--- a/perl-install/install/share/po/is.po
+++ b/perl-install/install/share/po/is.po
@@ -1456,7 +1456,7 @@ msgstr "Mús"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Leita að disk(um)"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/it.po b/perl-install/install/share/po/it.po
index cbc17df2c..c142fe80b 100644
--- a/perl-install/install/share/po/it.po
+++ b/perl-install/install/share/po/it.po
@@ -1468,7 +1468,7 @@ msgstr "Mouse"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Rilevamento disco fisso"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/ja.po b/perl-install/install/share/po/ja.po
index def63beed..0967329d2 100644
--- a/perl-install/install/share/po/ja.po
+++ b/perl-install/install/share/po/ja.po
@@ -1449,7 +1449,7 @@ msgstr "マウス"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "ハードドライブを検出"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/ko.po b/perl-install/install/share/po/ko.po
index c0f0677aa..a14039f5f 100644
--- a/perl-install/install/share/po/ko.po
+++ b/perl-install/install/share/po/ko.po
@@ -1439,7 +1439,7 @@ msgstr "마우스"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "하드 디스크 선택"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/ky.po b/perl-install/install/share/po/ky.po
index 3ef5926fc..aa6791197 100644
--- a/perl-install/install/share/po/ky.po
+++ b/perl-install/install/share/po/ky.po
@@ -1466,7 +1466,7 @@ msgstr "Чычкан"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Таш дискти аныктоо"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/lt.po b/perl-install/install/share/po/lt.po
index ca940ae31..c3c2a4e1f 100644
--- a/perl-install/install/share/po/lt.po
+++ b/perl-install/install/share/po/lt.po
@@ -1404,7 +1404,7 @@ msgstr "Pelė"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Kieto disko nustatymas"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/ltg.po b/perl-install/install/share/po/ltg.po
index d6e0b0157..ad5aef559 100644
--- a/perl-install/install/share/po/ltg.po
+++ b/perl-install/install/share/po/ltg.po
@@ -1450,7 +1450,7 @@ msgstr "Pele"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Cītuo diska nūteikšona"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/lv.po b/perl-install/install/share/po/lv.po
index 9662a5a28..05a3d4763 100644
--- a/perl-install/install/share/po/lv.po
+++ b/perl-install/install/share/po/lv.po
@@ -1430,7 +1430,7 @@ msgstr "Pele"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Cietā diska noteikšana"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/mk.po b/perl-install/install/share/po/mk.po
index 2ca2fffc4..0eae7faa1 100644
--- a/perl-install/install/share/po/mk.po
+++ b/perl-install/install/share/po/mk.po
@@ -1458,7 +1458,7 @@ msgstr "Глушец"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Детекција на хард дискот"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/mn.po b/perl-install/install/share/po/mn.po
index a92dd925c..1da130bcc 100644
--- a/perl-install/install/share/po/mn.po
+++ b/perl-install/install/share/po/mn.po
@@ -1374,7 +1374,7 @@ msgstr "Хулгана"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Хатуу диск хөтлөгч танилт"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/ms.po b/perl-install/install/share/po/ms.po
index 3452d7e55..1e7557caf 100644
--- a/perl-install/install/share/po/ms.po
+++ b/perl-install/install/share/po/ms.po
@@ -1392,7 +1392,7 @@ msgstr "Tetikus"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Pengesanan cakera keras"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/mt.po b/perl-install/install/share/po/mt.po
index fa5b9303c..b1493f9ef 100644
--- a/perl-install/install/share/po/mt.po
+++ b/perl-install/install/share/po/mt.po
@@ -1435,7 +1435,7 @@ msgstr "Maws"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Għarfien tal-ħard disk"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/nb.po b/perl-install/install/share/po/nb.po
index b7a53aa3d..8c7bddc16 100644
--- a/perl-install/install/share/po/nb.po
+++ b/perl-install/install/share/po/nb.po
@@ -1475,7 +1475,7 @@ msgstr "Mus"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Oppdaging av harddisk"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/nl.po b/perl-install/install/share/po/nl.po
index 1f1926113..4d39b50a3 100644
--- a/perl-install/install/share/po/nl.po
+++ b/perl-install/install/share/po/nl.po
@@ -1470,7 +1470,7 @@ msgstr "Muis"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Harde schijf-detectie"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/nn.po b/perl-install/install/share/po/nn.po
index 7c668beb2..818a65824 100644
--- a/perl-install/install/share/po/nn.po
+++ b/perl-install/install/share/po/nn.po
@@ -1452,7 +1452,7 @@ msgstr "Mus"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Harddiskoppdaging"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/pa_IN.po b/perl-install/install/share/po/pa_IN.po
index 8603cebf1..16199a272 100644
--- a/perl-install/install/share/po/pa_IN.po
+++ b/perl-install/install/share/po/pa_IN.po
@@ -1410,7 +1410,7 @@ msgstr "ਮਾਊਸ"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "ਹਾਰਡ ਡਰਾਈਵ ਖੋਜ"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/pl.po b/perl-install/install/share/po/pl.po
index 4ad2e2082..fcce99f9e 100644
--- a/perl-install/install/share/po/pl.po
+++ b/perl-install/install/share/po/pl.po
@@ -1470,7 +1470,7 @@ msgstr "Mysz"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Wykrywanie dysków"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/pt.po b/perl-install/install/share/po/pt.po
index c15d57d44..17d1aeecc 100644
--- a/perl-install/install/share/po/pt.po
+++ b/perl-install/install/share/po/pt.po
@@ -1476,7 +1476,7 @@ msgstr "Rato"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Detecção de discos rígidos"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/pt_BR.po b/perl-install/install/share/po/pt_BR.po
index 06af84169..01dc2ff1e 100644
--- a/perl-install/install/share/po/pt_BR.po
+++ b/perl-install/install/share/po/pt_BR.po
@@ -1477,7 +1477,7 @@ msgstr "Mouse"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Detecção de discos rígidos"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/ro.po b/perl-install/install/share/po/ro.po
index 3d5680de1..5f5639e7d 100644
--- a/perl-install/install/share/po/ro.po
+++ b/perl-install/install/share/po/ro.po
@@ -1505,7 +1505,7 @@ msgstr "Maus"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Detectarea discului dur"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/ru.po b/perl-install/install/share/po/ru.po
index f151ff92b..c21f85c02 100644
--- a/perl-install/install/share/po/ru.po
+++ b/perl-install/install/share/po/ru.po
@@ -1470,7 +1470,7 @@ msgstr "Мышь"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Поиск жёсткого диска"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/sc.po b/perl-install/install/share/po/sc.po
index 541c70648..b1a81e5ea 100644
--- a/perl-install/install/share/po/sc.po
+++ b/perl-install/install/share/po/sc.po
@@ -1379,7 +1379,7 @@ msgstr "Sòrixi"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Controllu de su discu tostau"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/sk.po b/perl-install/install/share/po/sk.po
index 86abaae97..0b25ac721 100644
--- a/perl-install/install/share/po/sk.po
+++ b/perl-install/install/share/po/sk.po
@@ -1435,7 +1435,7 @@ msgstr "Myš"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Detekcia pevného disku"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/sl.po b/perl-install/install/share/po/sl.po
index e9f6c8240..e8580fdd1 100644
--- a/perl-install/install/share/po/sl.po
+++ b/perl-install/install/share/po/sl.po
@@ -1464,7 +1464,7 @@ msgstr "Miška"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Zaznava trdega diska"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/sq.po b/perl-install/install/share/po/sq.po
index 8d5af0e40..b3db24990 100644
--- a/perl-install/install/share/po/sq.po
+++ b/perl-install/install/share/po/sq.po
@@ -1435,8 +1435,8 @@ msgstr "Mini"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
-msgstr "Zbulim i Diskut të Fortë (Hard drive)"
+"Hard disk drive detection"
+msgstr "Zbulim i Diskut të Fortë (Hard disk drive)"
 
 #: steps_list.pm:21 steps_list.pm:22
 #, c-format
diff --git a/perl-install/install/share/po/sr.po b/perl-install/install/share/po/sr.po
index a242ed35b..a2dc1caf2 100644
--- a/perl-install/install/share/po/sr.po
+++ b/perl-install/install/share/po/sr.po
@@ -1449,7 +1449,7 @@ msgstr ""
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Детекција хард диска"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/sr@Latn.po b/perl-install/install/share/po/sr@Latn.po
index d14df9fc8..04105142c 100644
--- a/perl-install/install/share/po/sr@Latn.po
+++ b/perl-install/install/share/po/sr@Latn.po
@@ -1449,7 +1449,7 @@ msgstr "Miš"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Detekcija hard diska"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/sv.po b/perl-install/install/share/po/sv.po
index 4b94ad4df..5dc3898f2 100644
--- a/perl-install/install/share/po/sv.po
+++ b/perl-install/install/share/po/sv.po
@@ -1464,7 +1464,7 @@ msgstr "Mus"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Identifiering av hårddisk"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/ta.po b/perl-install/install/share/po/ta.po
index 9c7025176..c7e3e9055 100644
--- a/perl-install/install/share/po/ta.po
+++ b/perl-install/install/share/po/ta.po
@@ -1409,7 +1409,7 @@ msgstr "எலி"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "வன்தட்டு கண்டுபிடித்தல்"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/tg.po b/perl-install/install/share/po/tg.po
index 8d211129c..10a5c7afd 100644
--- a/perl-install/install/share/po/tg.po
+++ b/perl-install/install/share/po/tg.po
@@ -1458,7 +1458,7 @@ msgstr "Муш"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Муаяйн намудани ронандаи сахт"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/th.po b/perl-install/install/share/po/th.po
index 8e5c29a05..3fc1c0a8b 100644
--- a/perl-install/install/share/po/th.po
+++ b/perl-install/install/share/po/th.po
@@ -1387,7 +1387,7 @@ msgstr "Mouse"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "การตรวจหาฮาร์ดไดรว์"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/tl.po b/perl-install/install/share/po/tl.po
index 9a4761267..2657b0302 100644
--- a/perl-install/install/share/po/tl.po
+++ b/perl-install/install/share/po/tl.po
@@ -1444,7 +1444,7 @@ msgstr "Mouse"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Pagtitiktik ng hard disk drive"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/tr.po b/perl-install/install/share/po/tr.po
index 29db14426..d2d421d6f 100644
--- a/perl-install/install/share/po/tr.po
+++ b/perl-install/install/share/po/tr.po
@@ -1468,7 +1468,7 @@ msgstr "Fare"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Sabit disk algılaması"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/uk.po b/perl-install/install/share/po/uk.po
index 2da29ba49..e434b4c4e 100644
--- a/perl-install/install/share/po/uk.po
+++ b/perl-install/install/share/po/uk.po
@@ -1470,7 +1470,7 @@ msgstr "Миша"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Визначення твердого диску"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/uz.po b/perl-install/install/share/po/uz.po
index 5b5b8f436..572077e3a 100644
--- a/perl-install/install/share/po/uz.po
+++ b/perl-install/install/share/po/uz.po
@@ -1451,7 +1451,7 @@ msgstr "Sichqoncha"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Qattiq diskni aniqlash"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/uz@cyrillic.po b/perl-install/install/share/po/uz@cyrillic.po
index 568f40386..eadb5f8ca 100644
--- a/perl-install/install/share/po/uz@cyrillic.po
+++ b/perl-install/install/share/po/uz@cyrillic.po
@@ -1446,7 +1446,7 @@ msgstr "Сичқонча"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Қаттиқ дискни аниқлаш"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/vi.po b/perl-install/install/share/po/vi.po
index ab4c8e298..281ce1c2f 100644
--- a/perl-install/install/share/po/vi.po
+++ b/perl-install/install/share/po/vi.po
@@ -1432,7 +1432,7 @@ msgstr "Chuột"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Dò tìm đĩa cứng"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/wa.po b/perl-install/install/share/po/wa.po
index c1d5fdea2..a8c219feb 100644
--- a/perl-install/install/share/po/wa.po
+++ b/perl-install/install/share/po/wa.po
@@ -1461,7 +1461,7 @@ msgstr "Sori"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "Trover les deurès plakes"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/zh_CN.po b/perl-install/install/share/po/zh_CN.po
index c56bacfcb..41707fdb7 100644
--- a/perl-install/install/share/po/zh_CN.po
+++ b/perl-install/install/share/po/zh_CN.po
@@ -1424,7 +1424,7 @@ msgstr "鼠标"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "硬盘检测"
 
 #: steps_list.pm:21 steps_list.pm:22
diff --git a/perl-install/install/share/po/zh_TW.po b/perl-install/install/share/po/zh_TW.po
index 2a17024dc..95b591353 100644
--- a/perl-install/install/share/po/zh_TW.po
+++ b/perl-install/install/share/po/zh_TW.po
@@ -1441,7 +1441,7 @@ msgstr "滑鼠"
 #, c-format
 msgid ""
 "_: Keep these entry short\n"
-"Hard drive detection"
+"Hard disk drive detection"
 msgstr "硬碟偵測"
 
 #: steps_list.pm:21 steps_list.pm:22