no_comment

5 files changed, 31 insertions, 24 deletions

diff --git a/docs/TODO b/docs/TODO
index 85c08fcee..eab20a2c2 100644
--- a/docs/TODO
+++ b/docs/TODO
@@ -29,9 +29,9 @@ try to figure why?
 (7.1 or later) clean SCSI CDROM autoboot.
 (7.1) sparc ehancement, avoid V7+ machine target (div and mul not in v7 standard)
 
-(7.1) improve printerdrake to at least same functionalities of printtool.
+(7.1) improve printerdrake to at least have the same functionalities as printtool.
 
-(7.1)better help for partitioning in newbie, keyboard shortcut.
+(7.1)better help for partitioning in newbie
 
 (7.1 or later?)help in some configuration files.
 
@@ -68,8 +68,6 @@ error handling (like reading hdlist)
 Tree -> CTree, ``all'' branch with all packages
 show the value associated (100->a must, 90->great, 80->nice, ... 10->useless, 0->do not install)
 
-(7.1)sound config, although very simple, no dedicated steps and only PCI (or maybe ISA-PNP if time left ?)
-
 (7.1?)grub, chos, gag
 
 (?)enable the testing of the mouse type (under X) (wheel)
@@ -82,11 +80,14 @@ possibility to specify the mouse
 (7.1 or later)widget for displaying fdisk (dindinx)
 (see above)add fdisk using the zvt widget (taken in gnome-libs)
 
-
 (done,pix,7.1)manage a lot of language (ergonomic issue as it already exists)
 
 (done,pix,7.1)tree for choosing things like timezone, monitors, graphic cards, modules, mice, keyboard? ...
 
+(done,pix,7.1)sound config, although very simple, no dedicated steps and only PCI (or maybe ISA-PNP if time left ?)
+
+(done,pix,7.1)partitioning, keyboard shortcut.
+
 ----
 paride in stage1
 
diff --git a/perl-install/ChangeLog b/perl-install/ChangeLog
index c4f4418f7..88a96d74e 100644
--- a/perl-install/ChangeLog
+++ b/perl-install/ChangeLog
@@ -1,5 +1,18 @@
 2000-02-23  Pixel  <pixel@mandrakesoft.com>
 
+	* install2.pm (%suggestedPartitions): remove any /boot entries
+	* install2.pm (selectInstallClass): removed the special code to
+	/boot entries from suggestedPartitions for on non-intel (and it
+	was buggy :)
+	* fsedit.pm (@suggestions): remove the /boot entry
+	* fsedit.pm (check_mntpoint): remove the 1024 cylinder check	
+	* fsedit.pm (suggest_part): remove the 1024 cylinder special case
+
+	* install_steps_interactive.pm (setupLILO): replace linear option
+	by lba32
+
+	* lilo.pm (suggest): add lba32 by default
+
 	* install_steps_interactive.pm (load_thiskind): moved the HPT
 	stuff to install_any::ultra66 and call it.
 	Add sound card configuration (3 lines :)
diff --git a/perl-install/fsedit.pm b/perl-install/fsedit.pm
index fee66e427..7e8fcf862 100644
--- a/perl-install/fsedit.pm
+++ b/perl-install/fsedit.pm
@@ -24,9 +24,6 @@ arch() =~ /^sparc/ ? (
   { mntpoint => "/",        size =>  50 << 11, type => 0x83, ratio => 1, maxsize => 1000 << 11 },
   { mntpoint => "swap",     size =>  30 << 11, type => 0x82, ratio => 1, maxsize => 500 << 11 },
 ) : (
-arch() =~ /^i386/ ? (
-  { mntpoint => "/boot",    size =>  16 << 11, type => 0x83, maxsize =>  30 << 11 },
-) : (),
   { mntpoint => "/",        size =>  50 << 11, type => 0x83, ratio => 1, maxsize => 300 << 11 },
   { mntpoint => "swap",     size =>  30 << 11, type => 0x82, ratio => 1, maxsize => 250 << 11 },
 ),
@@ -180,11 +177,11 @@ sub suggest_part($$$;$) {
       grep { !$part->{type} || $part->{type} == $_->{type} }
 	@$suggestions or return;
 
-    if (arch() =~ /^i386/) {
-	$best = $second if
-	  $best->{mntpoint} eq '/boot' &&
-	  $part->{start} + $best->{size} > 1024 * $hd->cylinder_size(); #- if the empty slot is beyond the 1024th cylinder, no use having /boot
-    }
+#-    if (arch() =~ /^i386/) {
+#-	  $best = $second if
+#-	    $best->{mntpoint} eq '/boot' &&
+#-	    $part->{start} + $best->{size} > 1024 * $hd->cylinder_size(); #- if the empty slot is beyond the 1024th cylinder, no use having /boot
+#-    }
 
     defined $best or return; #- sorry no suggestion :(
 
@@ -238,10 +235,10 @@ sub check_mntpoint {
 
     has_mntpoint($mntpoint, $hds) and die _("There is already a partition with mount point %s", $mntpoint);
 
-    if ($part->{start} + $part->{size} > 1024 * $hd->cylinder_size() && arch() =~ /i386/) {
-	die "/boot ending on cylinder > 1024" if $mntpoint eq "/boot";
-#	die     "/ ending on cylinder > 1024" if $mntpoint eq "/" && !has_mntpoint("/boot", $hds);
-    }
+#-    if ($part->{start} + $part->{size} > 1024 * $hd->cylinder_size() && arch() =~ /i386/) {
+#-	  die "/boot ending on cylinder > 1024" if $mntpoint eq "/boot";
+#-	  die     "/ ending on cylinder > 1024" if $mntpoint eq "/" && !has_mntpoint("/boot", $hds);
+#-    }
 }
 
 sub add($$$;$) {
diff --git a/perl-install/install2.pm b/perl-install/install2.pm
index cfb40c913..23478df31 100644
--- a/perl-install/install2.pm
+++ b/perl-install/install2.pm
@@ -111,20 +111,17 @@ arch() =~ /^sparc/ ? (
   ],
 ) : (
   normal => [
-    { mntpoint => "/boot", size =>  10 << 11, type => 0x83, maxsize => 30 << 11 },
     { mntpoint => "/",     size => 300 << 11, type => 0x83, ratio => 5, maxsize => 2500 << 11 },
     { mntpoint => "swap",  size =>  64 << 11, type => 0x82, ratio => 1, maxsize => 250 << 11 },
     { mntpoint => "/home", size => 300 << 11, type => 0x83, ratio => 2 },
   ],
   developer => [
-    { mntpoint => "/boot", size =>  10 << 11, type => 0x83, maxsize => 30 << 11 },
     { mntpoint => "swap",  size =>  64 << 11, type => 0x82, ratio => 1, maxsize => 250 << 11 },
     { mntpoint => "/",     size => 150 << 11, type => 0x83, ratio => 1, maxsize => 300 << 11 },
     { mntpoint => "/usr",  size => 300 << 11, type => 0x83, ratio => 4, maxsize =>1500 << 11 },
     { mntpoint => "/home", size => 100 << 11, type => 0x83, ratio => 5 },
   ],
   server => [
-    { mntpoint => "/boot", size =>  10 << 11, type => 0x83, maxsize => 30 << 11 },
     { mntpoint => "swap",  size =>  64 << 11, type => 0x82, ratio => 2, maxsize => 400 << 11 },
     { mntpoint => "/",     size => 150 << 11, type => 0x83, ratio => 1, maxsize => 250 << 11 },
     { mntpoint => "/usr",  size => 300 << 11, type => 0x83, ratio => 3, maxsize =>1500 << 11 },
@@ -141,7 +138,7 @@ arch() =~ /^sparc/ ? (
 #-the variable $default)
 #-#######################################################################################
 $o = $::o = {
-#    bootloader => { linear => 0, message => 1, timeout => 5, restricted => 0 },
+#    bootloader => { linear => 0, lba32 => 1, message => 1, timeout => 5, restricted => 0 },
     autoSCSI   => 0,
     mkbootdisk => 1, #- no mkbootdisk if 0 or undef, find a floppy with 1, or fd1
 #-    packages   => [ qw() ],
@@ -267,8 +264,7 @@ sub selectPath {
 sub selectInstallClass {
     $o->selectInstallClass(@install_classes);
    
-    $o->{partitions} ||= 
-      [ grep { arch() =~ /i386/ && $_->{mntpoint} ne "/boot" } @{$suggestedPartitions{$o->{installClass}}} ];
+    $o->{partitions} ||= $suggestedPartitions{$o->{installClass}};
 
     if ($o->{steps}{choosePackages}{entered} >= 1 && !$o->{steps}{doInstallStep}{done}) {
         $o->setPackages(\@install_classes);
diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm
index 78b5f68c3..93add6ea7 100644
--- a/perl-install/install_steps_interactive.pm
+++ b/perl-install/install_steps_interactive.pm
@@ -718,7 +718,7 @@ sub setupLILO {
 
 	my @l = (
 _("Boot device") => { val => \$b->{boot}, list => [ map { "/dev/$_" } (map { $_->{device} } @{$o->{hds}}, @{$o->{fstab}}), detect_devices::floppies ], not_edit => !$::expert },
-_("Linear (needed for some SCSI drives)") => { val => \$b->{linear}, type => "bool", text => _("linear") },
+_("LBA (doesn't work on old BIOSes)") => { val => \$b->{lba32}, type => "bool", text => "lba" },
 _("Compact") => { val => \$b->{compact}, type => "bool", text => _("compact") },
 _("Delay before booting default image") => \$b->{timeout},
 _("Video mode") => { val => \$b->{vga}, list => [ keys %lilo::vga_modes ], not_edit => $::beginner },