# translation of DrakX-gl.po to Galician
# Jesús Bravo Álvarez (mdk) <jba@pobox.com>, 2001
# Leandro Regueiro <unho@gulo.org>, 2004
#
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX-gl\n"
"POT-Creation-Date: 2005-02-24 14:10+0100\n"
"PO-Revision-Date: 2005-01-13 19:01+0100\n"
"Last-Translator: Leandro Regueiro <unho@gulo.org>\n"
"Language-Team: Galician <gpul-traduccion@ceu.fi.udc.es>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.0.1\n"
"X-Poedit-Language: Gallegan\n"
#: ../move/move.pm:292
#, c-format
msgid "Which USB key do you want to format?"
msgstr "Que memoria USB desexa formatar?"
#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""
"Está a piques de formatar un dispositivo USB \"%s\". Isto eliminará tódolos "
"datos que hai nel.\n"
"Asegúrese de que o dispositivo seleccionado é a memoria USB que quere "
"formatar. \n"
"Aconsellámoslle que desenchufe tódolos outros dispositivos de almacenamento "
"USB mentres fai esta operación."
#: ../move/move.pm:448 ../move/move.pm:460
#, c-format
msgid "Key is not writable"
msgstr "Non se pode escribir na memoria"
#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""
"Semella ser que a memoria USB ten activada a protección de escritura.\n"
"Desenchúfea, desactive a protección de escritura, e volva enchufala."
#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "Reintentar"
#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr "Continuar sen a memoria USB"
#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandrake Move again."
msgstr ""
"Semella ser que a memoria USB ten activada a protección de escritura, pero\n"
"non se pode desenchufar de maneira segura.\n"
"\n"
"\n"
"Clique no botón para reiniciar a máquina, desenchúfea, desactive a "
"protección\n"
"de escritura, enchufe a memoria outra vez, e execute Mandrake Move outra vez."
#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1317
#, c-format
msgid "Reboot"
msgstr "Reiniciar"
#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""
"A súa memoria USB non ten ningunha partición Windows (FAT)\n"
"válida. Cómpre unha para continuar (ademais, é máis estándar así\n"
"que poderá mover e acceder ós seus ficheiros dende máquinas\n"
"que executen Windows). Enchufe unha memoria USB que\n"
"conteña unha partición Windows.\n"
"\n"
"\n"
"Tamén pode continuar sen unha memoria USB - ainda\n"
"poderá usar Mandrake Move coma un Sistema Operativo\n"
"Mandrake live normal."
#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandrake Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""
#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr "Cómpre unha memoria para gardar os seus datos"
#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr "Detectar a memoria USB outra vez"
#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr ""
#: ../move/move.pm:517
#, fuzzy, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr "Establecendo o nivel de seguridade"
#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""
#: ../move/move.pm:556
#, c-format
msgid "Auto configuration"
msgstr "Auto configuración"
#: ../move/move.pm:556
#, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "Por favor agarde. detectando e configurando os dispositivos..."
#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:393
#: diskdrake/interactive.pm:411 diskdrake/interactive.pm:541
#: diskdrake/interactive.pm:546 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:183
#: install_any.pm:1564 install_any.pm:1587 install_steps.pm:82
#: install_steps_interactive.pm:38 interactive/http.pm:117
#: interactive/http.pm:118 network/netconnect.pm:1037
#: network/netconnect.pm:1041 network/netconnect.pm:1046
#: network/netconnect.pm:1072 network/netconnect.pm:1141
#: network/netconnect.pm:1145 network/netconnect.pm:1283
#: network/netconnect.pm:1288 network/netconnect.pm:1306
#: network/netconnect.pm:1491 printer/printerdrake.pm:238
#: printer/printerdrake.pm:245 printer/printerdrake.pm:270
#: printer/printerdrake.pm:416 printer/printerdrake.pm:421
#: printer/printerdrake.pm:434 printer/printerdrake.pm:444
#: printer/printerdrake.pm:508 printer/printerdrake.pm:635
#: printer/printerdrake.pm:1288 printer/printerdrake.pm:1335
#: printer/printerdrake.pm:1372 printer/printerdrake.pm:1416
#: printer/printerdrake.pm:1420 printer/printerdrake.pm:1434
#: printer/printerdrake.pm:1524 printer/printerdrake.pm:1605
#: printer/printerdrake.pm:1609 printer/printerdrake.pm:1613
#: printer/printerdrake.pm:1662 printer/printerdrake.pm:1719
#: printer/printerdrake.pm:1723 printer/printerdrake.pm:1737
#: printer/printerdrake.pm:1848 printer/printerdrake.pm:1852
#: printer/printerdrake.pm:1889 printer/printerdrake.pm:1957
#: printer/printerdrake.pm:1975 printer/printerdrake.pm:1984
#: printer/printerdrake.pm:1993 printer/printerdrake.pm:2004
#: printer/printerdrake.pm:2066 printer/printerdrake.pm:2159
#: printer/printerdrake.pm:2678 printer/printerdrake.pm:2949
#: printer/printerdrake.pm:2955 printer/printerdrake.pm:3501
#: printer/printerdrake.pm:3505 printer/printerdrake.pm:3509
#: printer/printerdrake.pm:3965 printer/printerdrake.pm:4205
#: printer/printerdrake.pm:4225 printer/printerdrake.pm:4301
#: printer/printerdrake.pm:4366 printer/printerdrake.pm:4483
#: standalone/drakTermServ:392 standalone/drakTermServ:753
#: standalone/drakTermServ:760 standalone/drakTermServ:779
#: standalone/drakTermServ:998 standalone/drakTermServ:1478
#: standalone/drakTermServ:1483 standalone/drakTermServ:1490
#: standalone/drakTermServ:1502 standalone/drakTermServ:1523
#: standalone/drakauth:35 standalone/drakbackup:511 standalone/drakbackup:625
#: standalone/drakbackup:1127 standalone/drakbackup:1160
#: standalone/drakbackup:1671 standalone/drakbackup:1827
#: standalone/drakbackup:2421 standalone/drakbackup:4110
#: standalone/drakbackup:4330 standalone/drakbug:191 standalone/drakclock:124
#: standalone/drakconnect:649 standalone/drakconnect:652
#: standalone/drakconnect:671 standalone/drakfloppy:297
#: standalone/drakfloppy:300 standalone/drakfloppy:306 standalone/drakfont:209
#: standalone/drakfont:222 standalone/drakfont:258 standalone/drakfont:604
#: standalone/draksplash:21 standalone/draksplash:501 standalone/drakxtv:107
#: standalone/finish-install:39 standalone/logdrake:169
#: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59
#: standalone/scannerdrake:202 standalone/scannerdrake:261
#: standalone/scannerdrake:715 standalone/scannerdrake:726
#: standalone/scannerdrake:865 standalone/scannerdrake:876
#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "Erro"
#: ../move/move.pm:605 install_steps.pm:83
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Ocorreu un erro, e o programa non sabe como manexalo de\n"
"maneira limpa. Continúe baixo a súa propia responsabilidade."
#: ../move/move.pm:660 install_steps_interactive.pm:38
#, c-format
msgid "An error occurred"
msgstr "Ocorreu un erro"
#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandrake Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""
#: ../move/move.pm:681
#, c-format
msgid "Remove system config files"
msgstr "Eliminando os ficheiros de configuración do sistema"
#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr ""
#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr ""
#: ../move/tree/mdk_totem:71
#, fuzzy, c-format
msgid "Kill those programs"
msgstr "Programa de debuxo"
#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr "Sen soporte para CDROM"
#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
#: diskdrake/interactive.pm:1020 diskdrake/interactive.pm:1030
#: diskdrake/interactive.pm:1083
#, c-format
msgid "Read carefully!"
msgstr "¡Lea con moita atención!"
#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
"Non pode usar outro CDROM cando se estean executando os seguintes "
"programas: \n"
"%s"
#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr "Copiando á memoria para permitir a extracción do CDROM"
#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 KB"
#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 KB"
#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 MB"
#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 MB"
#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 MB"
#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 MB"
#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 MB"
#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 MB"
#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 MB ou máis"
#: Xconfig/card.pm:159
#, c-format
msgid "X server"
msgstr "Servidor X"
#: Xconfig/card.pm:160
#, c-format
msgid "Choose an X server"
msgstr "Elixa un servidor X"
#: Xconfig/card.pm:192
#, fuzzy, c-format
msgid "Multi-head configuration"
msgstr "lendo a configuración"
#: Xconfig/card.pm:193
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
#: Xconfig/card.pm:262
#, c-format
msgid "Can not install Xorg package: %s"
msgstr "Non se puido instala-lo paquete Xorg: %s"
#: Xconfig/card.pm:272
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Seleccione a cantidade de memoria da súa tarxeta gráfica"
#: Xconfig/card.pm:349
#, c-format
msgid "Xorg configuration"
msgstr "Configuración de Xorg"
#: Xconfig/card.pm:351
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "¿Que configuración de Xorg quere usar?"
#: Xconfig/card.pm:384
#, c-format
msgid "Configure all heads independently"
msgstr ""
#: Xconfig/card.pm:385
#, fuzzy, c-format
msgid "Use Xinerama extension"
msgstr "Usar detección automática"
#: Xconfig/card.pm:390
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Configurar só a tarxeta \"%s\"%s"
#: Xconfig/card.pm:402 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"
#: Xconfig/card.pm:409 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "Xorg %s con aceleración 3D por hardware"
#: Xconfig/card.pm:411
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr ""
"A súa tarxeta pode ter soporte de aceleración 3D por hardware con Xorg %s."
#: Xconfig/card.pm:417
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "Xorg %s con aceleración 3D por hardware EXPERIMENTAL"
#: Xconfig/card.pm:419
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"A súa tarxeta pode ter soporte de aceleración 3D por hardware, pero só con\n"
"Xorg %s, TEÑA EN CONTA QUE ESTE SOPORTE É EXPERIMENTAL E PODE COLGAR O "
"SISTEMA."
#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:117 any.pm:914
#, c-format
msgid "Custom"
msgstr "Personalizado"
#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:86 printer/printerdrake.pm:737
#: printer/printerdrake.pm:4296 printer/printerdrake.pm:4742
#: standalone/draksplash:120 standalone/logdrake:174 standalone/net_applet:183
#: standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "Saír"
#: Xconfig/main.pm:117
#, c-format
msgid "Graphic Card"
msgstr "Tarxeta Gráfica"
#: Xconfig/main.pm:120 Xconfig/monitor.pm:111
#, c-format
msgid "Monitor"
msgstr "Monitor"
#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:221
#, c-format
msgid "Resolution"
msgstr "Resolución"
#: Xconfig/main.pm:128
#, c-format
msgid "Test"
msgstr "Proba"
#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:437
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
#: standalone/drakfont:493 standalone/drakfont:555
#, c-format
msgid "Options"
msgstr "Opcións"
#: Xconfig/main.pm:168
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr ""
#: Xconfig/main.pm:186
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"¿Manter os cambios?\n"
"A configuración actual é:\n"
"\n"
"%s"
#: Xconfig/monitor.pm:112
#, fuzzy, c-format
msgid "Choose a monitor for head #%d"
msgstr "Escolla un monitor"
#: Xconfig/monitor.pm:112
#, c-format
msgid "Choose a monitor"
msgstr "Escolla un monitor"
#: Xconfig/monitor.pm:118
#, c-format
msgid "Plug'n Play"
msgstr "Plug'n Play"
#: Xconfig/monitor.pm:119 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "Xenérico"
#: Xconfig/monitor.pm:120 standalone/drakconnect:569 standalone/harddrake2:52
#: standalone/harddrake2:86
#, c-format
msgid "Vendor"
msgstr "Vendedor"
#: Xconfig/monitor.pm:130
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr ""
#: Xconfig/monitor.pm:135
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Os dous parámetros críticos son a taxa de actualización vertical, que\n"
"indica a frecuencia ca que se actualiza a pantalla completa, e máis\n"
"importante aínda é a taxa de sincronismo horizontal, que é a\n"
"frecuencia ca que se mostran as liñas de barrido horizontal.\n"
"\n"
"É MOI IMPORTANTE que non especifique un tipo de monitor cun intervalo\n"
"de frecuencias de sincronismo superior á capacidade real do seu monitor,\n"
"xa que pode danalo.\n"
"No caso de dúbida, escolla unha configuración conservadora."
#: Xconfig/monitor.pm:142
#, c-format
msgid "Horizontal refresh rate"
msgstr "Frecuencia de actualización horizontal"
#: Xconfig/monitor.pm:143
#, c-format
msgid "Vertical refresh rate"
msgstr "Frecuencia de actualización vertical"
#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 cores (8 bits)"
#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 mil cores (15 bits)"
#: Xconfig/resolution_and_depth.pm:14
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 mil cores (16 bits)"
#: Xconfig/resolution_and_depth.pm:15
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 millóns de cores (24 bits)"
#: Xconfig/resolution_and_depth.pm:133
#, c-format
msgid "Resolutions"
msgstr "Resolucións"
#: Xconfig/resolution_and_depth.pm:270
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "Escolla a resolución e a profundidade de cor"
#: Xconfig/resolution_and_depth.pm:271
#, c-format
msgid "Graphics card: %s"
msgstr "Tarxeta gráfica: %s"
#: Xconfig/resolution_and_depth.pm:285 interactive.pm:424
#: interactive/gtk.pm:768 interactive/http.pm:103 interactive/http.pm:156
#: interactive/newt.pm:317 interactive/newt.pm:419 interactive/stdio.pm:39
#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
#: standalone/drakTermServ:199 standalone/drakTermServ:490
#: standalone/drakbackup:3967 standalone/drakbackup:4027
#: standalone/drakbackup:4071 standalone/drakconnect:165
#: standalone/drakconnect:849 standalone/drakconnect:936
#: standalone/drakconnect:1035 standalone/drakfont:576 standalone/drakroam:388
#: standalone/drakups:208 standalone/net_monitor:344 ugtk2.pm:409 ugtk2.pm:506
#: ugtk2.pm:900 ugtk2.pm:923
#, c-format
msgid "Ok"
msgstr "Aceptar"
#: Xconfig/resolution_and_depth.pm:285 diskdrake/smbnfs_gtk.pm:81 help.pm:89
#: help.pm:444 install_steps_gtk.pm:480 install_steps_interactive.pm:422
#: install_steps_interactive.pm:826 interactive.pm:425 interactive/gtk.pm:772
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:316
#: interactive/newt.pm:423 interactive/stdio.pm:39 interactive/stdio.pm:142
#: interactive/stdio.pm:176 printer/printerdrake.pm:3579
#: standalone/drakautoinst:217 standalone/drakbackup:3893
#: standalone/drakbackup:3897 standalone/drakbackup:3955
#: standalone/drakconnect:164 standalone/drakconnect:934
#: standalone/drakconnect:1034 standalone/drakfont:668 standalone/drakfont:745
#: standalone/drakups:215 standalone/logdrake:174 standalone/net_monitor:343
#: ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513 ugtk2.pm:900
#, c-format
msgid "Cancel"
msgstr "Cancelar"
#: Xconfig/resolution_and_depth.pm:285 diskdrake/hd_gtk.pm:153
#: install_steps_gtk.pm:228 install_steps_gtk.pm:629 interactive.pm:519
#: interactive/gtk.pm:638 interactive/gtk.pm:640 standalone/drakTermServ:284
#: standalone/drakbackup:3889 standalone/drakbug:104
#: standalone/drakconnect:160 standalone/drakconnect:245
#: standalone/drakfont:511 standalone/drakperm:134 standalone/draksec:336
#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
#: ugtk2.pm:1031 ugtk2.pm:1032
#, c-format
msgid "Help"
msgstr "Axuda"
#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "Proba da configuración"
#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "¿Desexa proba-la configuración?"
#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "Advertencia: probar esta tarxeta gráfica pode colgar o ordenador"
#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"Ocorreu un erro:\n"
"%s\n"
"Inténteo trocando algún parámetro"
#: Xconfig/test.pm:129
#, fuzzy, c-format
msgid "Leaving in %d seconds"
msgstr "%d segundos"
#: Xconfig/test.pm:129
#, c-format
msgid "Is this the correct setting?"
msgstr "É isto correcto?"
#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Disposición do teclado: %s\n"
#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "Tipo de rato: %s\n"
#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "Dispositivo do rato: %s\n"
#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "Monitor: %s\n"
#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Frecuencia horizontal do monitor: %s\n"
#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Frecuencia vertical do monitor: %s\n"
#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "Tarxeta gráfica: %s\n"
#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Memoria da tarxeta gráfica: %s KB\n"
#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "Profundidade de cor: %s\n"
#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "Resolución: %s\n"
#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "Controlador de Xorg: %s\n"
#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "Lanzar a interface gráfica ó arrincar"
#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"Pódese configurar o seu ordenador para que entre automaticamente\n"
"en a interface gráfica ó arrincar.\n"
"¿Desexa que se execute X ó reiniciar?"
#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
#: Xconfig/various.pm:99
#, fuzzy, c-format
msgid "What norm is your TV using?"
msgstr "¿Que tipo de conexión RDSI ten?"
#: Xconfig/xfree.pm:571
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr ""
#: any.pm:140 harddrake/sound.pm:191 install_any.pm:652 interactive.pm:462
#: standalone/drakconnect:167 standalone/drakconnect:613 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:231
#: standalone/service_harddrake:204
#, c-format
msgid "Please wait"
msgstr "Por favor, agarde"
#: any.pm:140
#, c-format
msgid "Bootloader installation in progress"
msgstr "Instalando o cargador de arrinque"
#: any.pm:151
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s. However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""
#: any.pm:162
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr "A instalación do cargador de arrinque fallou. Ocorreu o seguinte erro:"
#: any.pm:168
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader. If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
#: any.pm:206
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"Decidiu instala-lo cargador de arrinque nunha partición.\n"
"Isto implica que xa ten un cargador de arrinque no disco duro que está "
"arrincando (p.ex.: System Commander).\n"
"\n"
"¿Dende qué unidade está arrincando?"
#: any.pm:229 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "Primeiro sector do disco (MBR)"
#: any.pm:230
#, c-format
msgid "First sector of the root partition"
msgstr "Primeiro sector da partición raiz"
#: any.pm:232
#, c-format
msgid "On Floppy"
msgstr "Nun Disquete"
#: any.pm:234 help.pm:739 printer/printerdrake.pm:3962
#, c-format
msgid "Skip"
msgstr "Omitir"
#: any.pm:238
#, c-format
msgid "LILO/grub Installation"
msgstr "Instalación do LILO/grub"
#: any.pm:239
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "¿Onde quere instala-lo cargador de arrinque?"
#: any.pm:264 standalone/drakboot:307
#, c-format
msgid "Boot Style Configuration"
msgstr "Configuración do Estilo de Arrinque"
#: any.pm:266 any.pm:298
#, c-format
msgid "Bootloader main options"
msgstr "Opcións principais do cargador de arrinque"
#: any.pm:270
#, c-format
msgid "Give the ram size in MB"
msgstr "Indique o tamaño da memoria RAM en MB"
#: any.pm:272
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"A opción ``Restrinxir opcións da liña de comandos'' non ten sentido sen "
"contrasinal"
#: any.pm:273 any.pm:606 authentication.pm:176
#, c-format
msgid "The passwords do not match"
msgstr "Os contrasinais non coinciden"
#: any.pm:273 any.pm:606 authentication.pm:176 diskdrake/interactive.pm:1270
#, c-format
msgid "Please try again"
msgstr "Por favor, inténteo de novo"
#: any.pm:278 any.pm:301
#, c-format
msgid "Bootloader to use"
msgstr "Cargador de arrinque que se usará"
#: any.pm:280 any.pm:303
#, c-format
msgid "Boot device"
msgstr "Dispositivo de arrinque"
#: any.pm:282
#, c-format
msgid "Delay before booting default image"
msgstr "Retardo antes de arrinca-la imaxe por omisión"
#: any.pm:283
#, c-format
msgid "Enable ACPI"
msgstr "Activar ACPI"
#: any.pm:285
#, c-format
msgid "Force no APIC"
msgstr ""
#: any.pm:287
#, c-format
msgid "Force No Local APIC"
msgstr ""
#: any.pm:289 any.pm:633 authentication.pm:181 diskdrake/smbnfs_gtk.pm:180
#: network/netconnect.pm:633 printer/printerdrake.pm:1596
#: printer/printerdrake.pm:1716 standalone/drakbackup:1653
#: standalone/drakbackup:3495 standalone/drakups:295
#, c-format
msgid "Password"
msgstr "Contrasinal"
#: any.pm:290 any.pm:634 authentication.pm:182
#, c-format
msgid "Password (again)"
msgstr "Contrasinal (de novo)"
#: any.pm:291
#, c-format
msgid "Restrict command line options"
msgstr "Restrinxir opcións da liña de comandos"
#: any.pm:291
#, c-format
msgid "restrict"
msgstr "restrinxir"
#: any.pm:293
#, c-format
msgid "Clean /tmp at each boot"
msgstr "Baleirar /tmp en cada arrinque"
#: any.pm:294
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Tamaño exacto da memoria RAM se for necesario (atopáronse %d MB)"
#: any.pm:302
#, c-format
msgid "Init Message"
msgstr "Mensaxe Inicial"
#: any.pm:304
#, c-format
msgid "Open Firmware Delay"
msgstr ""
#: any.pm:305
#, c-format
msgid "Kernel Boot Timeout"
msgstr ""
#: any.pm:306
#, c-format
msgid "Enable CD Boot?"
msgstr "¿Permiti-lo arrinque dende un CD?"
#: any.pm:307
#, c-format
msgid "Enable OF Boot?"
msgstr ""
#: any.pm:308
#, c-format
msgid "Default OS?"
msgstr "¿S.O. por omisión?"
#: any.pm:361
#, c-format
msgid "Image"
msgstr "Imaxe"
#: any.pm:362 any.pm:372
#, c-format
msgid "Root"
msgstr "Raíz"
#: any.pm:363 any.pm:385
#, c-format
msgid "Append"
msgstr "Agregar"
#: any.pm:365 standalone/drakboot:309 standalone/drakboot:313
#, c-format
msgid "Video mode"
msgstr "Modo de video"
#: any.pm:367
#, c-format
msgid "Initrd"
msgstr "Initrd"
#: any.pm:368
#, c-format
msgid "Network profile"
msgstr "Perfil de rede"
#: any.pm:377 any.pm:382 any.pm:384
#, c-format
msgid "Label"
msgstr "Etiqueta"
#: any.pm:379 any.pm:389 harddrake/v4l.pm:275 standalone/drakfloppy:84
#: standalone/drakfloppy:90 standalone/draksec:52
#, c-format
msgid "Default"
msgstr "Por omisión"
#: any.pm:386
#, c-format
msgid "Initrd-size"
msgstr ""
#: any.pm:388
#, c-format
msgid "NoVideo"
msgstr ""
#: any.pm:399
#, c-format
msgid "Empty label not allowed"
msgstr "Etiqueta baleira non permitida"
#: any.pm:400
#, c-format
msgid "You must specify a kernel image"
msgstr "Debe especificar unha imaxe do kernel"
#: any.pm:400
#, c-format
msgid "You must specify a root partition"
msgstr "Debe especificar unha partición raíz"
#: any.pm:401
#, c-format
msgid "This label is already used"
msgstr "Esta etiqueta xa se está usando"
#: any.pm:415
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "¿Qué tipo de entrada desexa engadir?"
#: any.pm:416
#, c-format
msgid "Linux"
msgstr "Linux"
#: any.pm:416
#, c-format
msgid "Other OS (SunOS...)"
msgstr "Outros S.O. (SunOS...)"
#: any.pm:417
#, c-format
msgid "Other OS (MacOS...)"
msgstr "Outros S.O. (MacOS...)"
#: any.pm:417
#, c-format
msgid "Other OS (Windows...)"
msgstr "Outros S.O. (Windows...)"
#: any.pm:445
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"Estas son as diferentes entradas.\n"
"Pode engadir algunhas máis ou cambia-las que xa existen."
#: any.pm:592
#, c-format
msgid "access to X programs"
msgstr "acceso ós programas X"
#: any.pm:593
#, c-format
msgid "access to rpm tools"
msgstr "acceso ás ferramentas rpm"
#: any.pm:594
#, c-format
msgid "allow \"su\""
msgstr "permitir \"su\""
#: any.pm:595
#, c-format
msgid "access to administrative files"
msgstr "acceso ós ficheiros de administración"
#: any.pm:596
#, c-format
msgid "access to network tools"
msgstr "acceso ás ferramentas de rede"
#: any.pm:597
#, c-format
msgid "access to compilation tools"
msgstr "acceso ás ferramentas de compilación"
#: any.pm:602
#, c-format
msgid "(already added %s)"
msgstr "(%s xa foi engadido)"
#: any.pm:607
#, c-format
msgid "This password is too simple"
msgstr "Este contrasinal é demasiado simple"
#: any.pm:608
#, c-format
msgid "Please give a user name"
msgstr "Por favor, indique un nome de usuario"
#: any.pm:609
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
"O nome de usuario (login) só pode conter letras minúsculas, números, '-' e "
"'_'"
#: any.pm:610
#, c-format
msgid "The user name is too long"
msgstr "O nome de usuario é moi longo"
#: any.pm:611
#, c-format
msgid "This user name has already been added"
msgstr "Este nome de usuario xa está engadido"
#: any.pm:615
#, c-format
msgid "Add user"
msgstr "Engadir usuario"
#: any.pm:616
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Introduza un usuario\n"
"%s"
#: any.pm:619 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:191
#: printer/printerdrake.pm:376 printer/printerdrake.pm:4742
#: standalone/drakbackup:2708 standalone/scannerdrake:668
#: standalone/scannerdrake:818
#, c-format
msgid "Done"
msgstr "Feito"
#: any.pm:620 help.pm:51
#, c-format
msgid "Accept user"
msgstr "Aceptar usuario"
#: any.pm:631
#, c-format
msgid "Real name"
msgstr "Nome real"
#: any.pm:632 standalone/drakbackup:1648
#, c-format
msgid "Login name"
msgstr "Nome de usuario"
#: any.pm:635
#, c-format
msgid "Shell"
msgstr "Shell"
#: any.pm:637
#, c-format
msgid "Icon"
msgstr "Icona"
#: any.pm:684 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "Login automático"
#: any.pm:685
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr ""
"Pódese configurar o ordenador para que entre automáticamente\n"
"un usuario determinado."
#: any.pm:686 help.pm:51
#, c-format
msgid "Do you want to use this feature?"
msgstr "Desexa usar esta funcionalidade?"
#: any.pm:687
#, c-format
msgid "Choose the default user:"
msgstr "Escolla o usuario por defecto:"
#: any.pm:688
#, c-format
msgid "Choose the window manager to run:"
msgstr "Escolla o xestor de fiestras que se executará:"
#: any.pm:700
#, c-format
msgid "Please choose a language to use."
msgstr "Por favor, escolla a lingua que desexe usar."
#: any.pm:701
#, c-format
msgid "Language choice"
msgstr "Selección da Lingua"
#: any.pm:727
#, c-format
msgid ""
"Mandrakelinux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
"Mandrakelinux pode soportar múltiples linguas. Seleccione\n"
"as linguas que desexa instalar. Esta linguas estarán dispoñibles\n"
"cando a instalación estea completa e reinicie o seu sistema."
#: any.pm:746 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr "Usar Unicode por omisión"
#: any.pm:747 help.pm:647
#, c-format
msgid "All languages"
msgstr "Tódalas linguas"
#: any.pm:786 help.pm:566 help.pm:855 install_steps_interactive.pm:946
#, c-format
msgid "Country / Region"
msgstr "País"
#: any.pm:787
#, c-format
msgid "Please choose your country."
msgstr "Por favor, escolla o seu país."
#: any.pm:789
#, c-format
msgid "Here is the full list of available countries"
msgstr "Esta é a lista completa dos paises dispoñibles"
#: any.pm:790
#, c-format
msgid "Other Countries"
msgstr "Outros Paises"
#: any.pm:798
#, c-format
msgid "Input method:"
msgstr ""
#: any.pm:799 install_any.pm:388 network/netconnect.pm:323
#: network/netconnect.pm:328 printer/printerdrake.pm:99
#: printer/printerdrake.pm:2111
#, c-format
msgid "None"
msgstr "Ningún"
#: any.pm:914
#, c-format
msgid "No sharing"
msgstr "Non compartir"
#: any.pm:914
#, c-format
msgid "Allow all users"
msgstr "Permitirlle a tódolos usuarios"
#: any.pm:918
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
#: any.pm:930
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""
"NFS: o sistema tradicional de compartición de ficheiros de Unix, con menos "
"soporte en Mac e Windows."
#: any.pm:933
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""
"SMB: un sistema de compartición de ficheiros que se usa en sistemas Windows, "
"Mac OS X e varios Linux modernos."
#: any.pm:941
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr "Pode exportar usando NFS ou SMB. Por favor, escolla cal quere usar."
#: any.pm:966
#, c-format
msgid "Launch userdrake"
msgstr "Executar userdrake"
#: any.pm:966 printer/printerdrake.pm:3802 printer/printerdrake.pm:3805
#: printer/printerdrake.pm:3806 printer/printerdrake.pm:3807
#: printer/printerdrake.pm:5036 standalone/drakTermServ:294
#: standalone/drakbackup:4089 standalone/drakbug:126 standalone/drakfont:499
#: standalone/drakfont:595 standalone/net_monitor:123
#: standalone/printerdrake:547
#, c-format
msgid "Close"
msgstr "Pechar"
#: any.pm:968
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
#: authentication.pm:16
#, c-format
msgid "Local file"
msgstr "Ficheiro local"
#: authentication.pm:17
#, c-format
msgid "LDAP"
msgstr "LDAP"
#: authentication.pm:18
#, c-format
msgid "NIS"
msgstr "NIS"
#: authentication.pm:19
#, c-format
msgid "Smart Card"
msgstr "Tarxeta Smart"
#: authentication.pm:20 authentication.pm:148
#, c-format
msgid "Windows Domain"
msgstr "Dominio Windows"
#: authentication.pm:21
#, c-format
msgid "Active Directory with SFU"
msgstr "Directorio Activo con SFU"
#: authentication.pm:22
#, c-format
msgid "Active Directory with Winbind"
msgstr "Directorio Activo con Winbind"
#: authentication.pm:51
#, c-format
msgid "Local file:"
msgstr "Ficheiro local:"
#: authentication.pm:51
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr ""
#: authentication.pm:52
#, c-format
msgid "LDAP:"
msgstr "LDAP:"
#: authentication.pm:52
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""
#: authentication.pm:53
#, c-format
msgid "NIS:"
msgstr "NIS:"
#: authentication.pm:53
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""
#: authentication.pm:54
#, c-format
msgid "Windows Domain:"
msgstr "Dominio Windows:"
#: authentication.pm:54
#, c-format
msgid ""
"Winbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""
#: authentication.pm:55
#, c-format
msgid "Active Directory with SFU:"
msgstr "Directorio Activo con SFU:"
#: authentication.pm:55 authentication.pm:56
#, c-format
msgid ""
"Kerberos is a secure system for providing network authentication services."
msgstr ""
"Kerberos é un sistema seguro que proporciona servicios de autenticación por "
"rede."
#: authentication.pm:56
#, c-format
msgid "Active Directory with Winbind:"
msgstr "Directorio Activo con Winbind:"
#: authentication.pm:81
#, c-format
msgid "Authentication LDAP"
msgstr "Autenticación LDAP"
#: authentication.pm:82
#, c-format
msgid "LDAP Base dn"
msgstr ""
#: authentication.pm:83 share/compssUsers.pl:101
#, c-format
msgid "LDAP Server"
msgstr "Servidor LDAP"
#: authentication.pm:96 fsedit.pm:21
#, c-format
msgid "simple"
msgstr "simple"
#: authentication.pm:97
#, c-format
msgid "TLS"
msgstr "TLS"
#: authentication.pm:98
#, c-format
msgid "SSL"
msgstr "SSL"
#: authentication.pm:99
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr ""
#: authentication.pm:106 authentication.pm:144
#, fuzzy, c-format
msgid "Authentication Active Directory"
msgstr "Autenticación"
#: authentication.pm:107 authentication.pm:146 diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "Dominio"
#: authentication.pm:109 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:135 share/compssUsers.pl:81
#: standalone/drakTermServ:269
#, c-format
msgid "Server"
msgstr "Servidor"
#: authentication.pm:110
#, c-format
msgid "LDAP users database"
msgstr "Base de datos de usuarios LDAP"
#: authentication.pm:111
#, c-format
msgid "Use Anonymous BIND "
msgstr "Usar BIND anónimo"
#: authentication.pm:112
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr ""
#: authentication.pm:113
#, c-format
msgid "Password for user"
msgstr "Contrasinal para o usuario"
#: authentication.pm:114
#, c-format
msgid "Encryption"
msgstr "Cifrado"
#: authentication.pm:125
#, c-format
msgid "Authentication NIS"
msgstr "Autenticación NIS"
#: authentication.pm:126
#, c-format
msgid "NIS Domain"
msgstr "Dominio NIS"
#: authentication.pm:127
#, c-format
msgid "NIS Server"
msgstr "Servidor NIS"
#: authentication.pm:132
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
#: authentication.pm:144
#, fuzzy, c-format
msgid "Authentication Windows Domain"
msgstr "Autenticación"
#: authentication.pm:149
#, c-format
msgid "Domain Admin User Name"
msgstr "Nome de Usuario do Administrador do Dominio"
#: authentication.pm:150
#, c-format
msgid "Domain Admin Password"
msgstr "Contrasinal do Administrador do Dominio"
#: authentication.pm:151
#, c-format
msgid "Use Idmap for store UID/SID "
msgstr ""
#: authentication.pm:152
#, fuzzy, c-format
msgid "Default Idmap "
msgstr "Escritorio por omisión"
#: authentication.pm:165
#, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr ""
#: authentication.pm:166
#, c-format
msgid "Set administrator (root) password"
msgstr "Estableza o contrasinal do administrador (root)"
#: authentication.pm:167 standalone/drakvpn:1125
#, c-format
msgid "Authentication method"
msgstr "Método de autenticación"
#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:172 help.pm:722
#, c-format
msgid "No password"
msgstr "Sen contrasinal"
#: authentication.pm:178
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr ""
"Este contrasinal é demasiado simple (ten que ter polo menos %d caracteres)"
#: authentication.pm:183 network/netconnect.pm:328 network/netconnect.pm:634
#: standalone/drakauth:23 standalone/drakauth:25 standalone/drakconnect:459
#, c-format
msgid "Authentication"
msgstr "Autenticación"
#: authentication.pm:296
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr ""
# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:728
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
"Benvido o selector de sistema operativo!\n"
"\n"
"Escolla un sistema operativo na lista de enriba, ou\n"
"agarde a que arrinque o sistema por defecto.\n"
"\n"
#: bootloader.pm:815
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO con menú gráfico"
#: bootloader.pm:816
#, c-format
msgid "LILO with text menu"
msgstr "LILO con menú de texto"
#: bootloader.pm:817
#, c-format
msgid "Grub"
msgstr "Grub"
#: bootloader.pm:818
#, c-format
msgid "Yaboot"
msgstr "Yaboot"
#: bootloader.pm:881
#, c-format
msgid "not enough room in /boot"
msgstr "non hai espacio dabondo en /boot"
#: bootloader.pm:1295
#, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "Non se pode instala-lo cargador de arrinque nunha partición %s\n"
#: bootloader.pm:1340
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""
"A configuración do seu cargador de arrinque ten que actualizarse porque "
"cambiou o número da partición"
#: bootloader.pm:1355
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""
#: bootloader.pm:1356
#, c-format
msgid "Re-install Boot Loader"
msgstr "Reinstala-lo Cargador de Arrinque"
#: common.pm:125
#, c-format
msgid "KB"
msgstr "KB"
#: common.pm:125
#, c-format
msgid "MB"
msgstr "MB"
#: common.pm:125
#, c-format
msgid "GB"
msgstr "GB"
#: common.pm:133
#, c-format
msgid "TB"
msgstr "TB"
#: common.pm:141
#, c-format
msgid "%d minutes"
msgstr "%d minutos"
#: common.pm:143
#, c-format
msgid "1 minute"
msgstr "1 minuto"
#: common.pm:145
#, c-format
msgid "%d seconds"
msgstr "%d segundos"
#: common.pm:240
#, c-format
msgid "kdesu missing"
msgstr "falla o kdesu"
#: common.pm:243
#, c-format
msgid "consolehelper missing"
msgstr ""
#: crypto.pm:14 crypto.pm:43 lang.pm:202 network/adsl_consts.pm:50
#: network/adsl_consts.pm:58 network/adsl_consts.pm:66
#, c-format
msgid "Austria"
msgstr "Austria"
#: crypto.pm:15 crypto.pm:34 lang.pm:209 network/adsl_consts.pm:74
#: network/adsl_consts.pm:82 network/adsl_consts.pm:93
#: network/adsl_consts.pm:101 network/netconnect.pm:50
#, c-format
msgid "Belgium"
msgstr "Bélxica"
#: crypto.pm:16 lang.pm:230 network/adsl_consts.pm:780
#: network/adsl_consts.pm:788 network/adsl_consts.pm:798
#, c-format
msgid "Switzerland"
msgstr "Suíza"
#: crypto.pm:17 lang.pm:237
#, c-format
msgid "Costa Rica"
msgstr "Costa Rica"
#: crypto.pm:18 crypto.pm:35 lang.pm:243 network/adsl_consts.pm:319
#, c-format
msgid "Czech Republic"
msgstr "República Checa"
#: crypto.pm:19 crypto.pm:36 lang.pm:244 network/adsl_consts.pm:437
#: network/adsl_consts.pm:445
#, c-format
msgid "Germany"
msgstr "Alemaña"
#: crypto.pm:20 crypto.pm:33 lang.pm:262 network/adsl_consts.pm:343
#: network/adsl_consts.pm:354 network/adsl_consts.pm:365
#: network/adsl_consts.pm:375 network/adsl_consts.pm:385
#: network/adsl_consts.pm:396 network/adsl_consts.pm:407
#: network/adsl_consts.pm:417 network/adsl_consts.pm:427
#: network/netconnect.pm:47
#, c-format
msgid "France"
msgstr "Francia"
#: crypto.pm:21 crypto.pm:37 lang.pm:275 network/adsl_consts.pm:455
#, c-format
msgid "Greece"
msgstr "Grecia"
#: crypto.pm:22 lang.pm:286 network/adsl_consts.pm:463
#, c-format
msgid "Hungary"
msgstr "Hungría"
#: crypto.pm:23 crypto.pm:42 lang.pm:295 network/adsl_consts.pm:489
#: network/adsl_consts.pm:499 network/adsl_consts.pm:509
#: network/adsl_consts.pm:517 network/netconnect.pm:49 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "Italia"
#: crypto.pm:24 crypto.pm:41 lang.pm:347 network/adsl_consts.pm:545
#: network/adsl_consts.pm:553 network/adsl_consts.pm:561
#: network/adsl_consts.pm:569 network/netconnect.pm:48
#, c-format
msgid "Netherlands"
msgstr "Países Baixos"
#: crypto.pm:25 crypto.pm:38 lang.pm:348 network/adsl_consts.pm:577
#: network/adsl_consts.pm:582 network/adsl_consts.pm:587
#: network/adsl_consts.pm:592 network/adsl_consts.pm:597
#: network/adsl_consts.pm:602 network/adsl_consts.pm:607
#, c-format
msgid "Norway"
msgstr "Noruega"
#: crypto.pm:26 lang.pm:360 network/adsl_consts.pm:614
#: network/adsl_consts.pm:624
#, c-format
msgid "Poland"
msgstr "Polonia"
#: crypto.pm:27 crypto.pm:39 lang.pm:377 network/adsl_consts.pm:772
#, c-format
msgid "Sweden"
msgstr "Suecia"
#: crypto.pm:28 lang.pm:382
#, c-format
msgid "Slovakia"
msgstr "Eslovaquia"
#: crypto.pm:29 lang.pm:406
#, c-format
msgid "Taiwan"
msgstr "Taiwán"
#: crypto.pm:40 crypto.pm:75 lang.pm:411 network/netconnect.pm:51
#, c-format
msgid "United States"
msgstr "Estados Unidos"
#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "Novo"
#: diskdrake/dav.pm:61 diskdrake/interactive.pm:443 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Unmount"
msgstr "Desmontar"
#: diskdrake/dav.pm:62 diskdrake/interactive.pm:440 diskdrake/smbnfs_gtk.pm:76
#, c-format
msgid "Mount"
msgstr "Montar"
#: diskdrake/dav.pm:64 diskdrake/interactive.pm:435
#: diskdrake/interactive.pm:653 diskdrake/interactive.pm:672
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
#, c-format
msgid "Mount point"
msgstr "Punto de montaxe"
#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "Por favor, introduza a URL do servidor WebDAV"
#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "A URL debe comezar con http:// ou https://"
#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "Servidor: "
#: diskdrake/dav.pm:110 diskdrake/interactive.pm:504
#: diskdrake/interactive.pm:1166 diskdrake/interactive.pm:1241
#, c-format
msgid "Mount point: "
msgstr "Punto de montaxe: "
#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1248
#, c-format
msgid "Options: %s"
msgstr "Opcións: %s"
#: diskdrake/hd_gtk.pm:95
#, c-format
msgid "Please make a backup of your data first"
msgstr "Faga primeiro unha copia de seguridade dos seus datos"
#: diskdrake/hd_gtk.pm:98
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Se ten pensado usar aboot, teña coidado de deixar un espacio libre (2048\n"
"sectores abondan) no comezo do disco"
#: diskdrake/hd_gtk.pm:155 help.pm:530
#, c-format
msgid "Wizard"
msgstr "Asistente"
#: diskdrake/hd_gtk.pm:188
#, c-format
msgid "Choose action"
msgstr "Escolla unha acción"
#: diskdrake/hd_gtk.pm:192
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Ten unha partición grande con Microsoft Windows.\n"
"Aconséllase que primeiro a redimensione\n"
"(clique nela, e logo en \"Redimensionar\")"
#: diskdrake/hd_gtk.pm:194
#, c-format
msgid "Please click on a partition"
msgstr "Por favor, clique nunha partición"
#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:482
#: standalone/drakbackup:2943 standalone/drakbackup:3003
#, c-format
msgid "Details"
msgstr "Detalles"
#: diskdrake/hd_gtk.pm:254
#, c-format
msgid "No hard drives found"
msgstr "Non se atoparon unidades de disco duro"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Ext2"
msgstr "Ext2"
#: diskdrake/hd_gtk.pm:338
#, fuzzy, c-format
msgid "Journalised FS"
msgstr "mount fallou"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Swap"
msgstr "Intercambio"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "SunOS"
msgstr "SunOS"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "HFS"
msgstr "HFS"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Windows"
msgstr "Windows"
#: diskdrake/hd_gtk.pm:339 install_steps_gtk.pm:284 mouse.pm:168
#: services.pm:162 standalone/drakbackup:1609 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "Outros"
#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1181
#, c-format
msgid "Empty"
msgstr "Baleiro"
#: diskdrake/hd_gtk.pm:343
#, c-format
msgid "Filesystem types:"
msgstr "Tipos de sistemas de ficheiros:"
#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
#, c-format
msgid "Use ``%s'' instead"
msgstr "Usar ``%s'' no seu lugar"
#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:459
#, c-format
msgid "Create"
msgstr "Crear"
#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
#: diskdrake/interactive.pm:436 diskdrake/interactive.pm:606
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:106 standalone/harddrake2:115
#, c-format
msgid "Type"
msgstr "Tipo"
#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:444
#: standalone/drakperm:124 standalone/printerdrake:235
#, c-format
msgid "Delete"
msgstr "Eliminar"
#: diskdrake/hd_gtk.pm:368
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Usar ``Desmontar'' primeiro"
#: diskdrake/interactive.pm:191
#, c-format
msgid "Choose another partition"
msgstr "Escolla outra partición"
#: diskdrake/interactive.pm:191
#, c-format
msgid "Choose a partition"
msgstr "Escolla unha partición"
#: diskdrake/interactive.pm:220
#, c-format
msgid "Exit"
msgstr "Sair"
#: diskdrake/interactive.pm:253 help.pm:530
#, c-format
msgid "Undo"
msgstr "Refacer"
#: diskdrake/interactive.pm:253
#, c-format
msgid "Toggle to normal mode"
msgstr "Cambiar a modo normal"
#: diskdrake/interactive.pm:253
#, c-format
msgid "Toggle to expert mode"
msgstr "Cambiar a modo experto"
#: diskdrake/interactive.pm:272
#, c-format
msgid "Continue anyway?"
msgstr "¿Continuar de calquera xeito?"
#: diskdrake/interactive.pm:275
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""
#: diskdrake/interactive.pm:282
#, c-format
msgid "Quit without saving"
msgstr "Sair sen gardar"
#: diskdrake/interactive.pm:282
#, c-format
msgid "Quit without writing the partition table?"
msgstr "¿Saír do programa sen garda-la táboa de particións?"
#: diskdrake/interactive.pm:287
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "¿Desexa garda-las modificacións de /etc/fstab?"
#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
"Necesita reinicia-lo equipo para que a modificación da táboa\n"
"de particións se tome en conta"
#: diskdrake/interactive.pm:307 help.pm:530
#, c-format
msgid "Clear all"
msgstr "Borrar todas"
#: diskdrake/interactive.pm:308 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "Asignación automática"
#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:122
#, c-format
msgid "More"
msgstr "Máis"
#: diskdrake/interactive.pm:314
#, c-format
msgid "Hard drive information"
msgstr "Información da unidade de disco duro"
#: diskdrake/interactive.pm:346
#, c-format
msgid "All primary partitions are used"
msgstr "Estanse usando tódalas particións primarias"
#: diskdrake/interactive.pm:347
#, c-format
msgid "I can not add any more partitions"
msgstr "Non é posible engadir máis particións"
#: diskdrake/interactive.pm:348
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Para ter máis particións, borre unha para poder crear unha partición "
"extendida"
#: diskdrake/interactive.pm:359 help.pm:530
#, c-format
msgid "Save partition table"
msgstr "Garda-la táboa de particións"
#: diskdrake/interactive.pm:360 help.pm:530
#, c-format
msgid "Restore partition table"
msgstr "Restaura-la táboa de particións"
#: diskdrake/interactive.pm:361 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "Recupera-la táboa de particións"
#: diskdrake/interactive.pm:363 help.pm:530
#, c-format
msgid "Reload partition table"
msgstr "Recarga-la táboa de particións"
#: diskdrake/interactive.pm:365
#, c-format
msgid "Removable media automounting"
msgstr "Montar automáticamente os soportes extraíbles"
#: diskdrake/interactive.pm:376 diskdrake/interactive.pm:402
#, c-format
msgid "Select file"
msgstr "Seleccione un ficheiro"
#: diskdrake/interactive.pm:388
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"A táboa de particións de rescate non ten o\n"
"mesmo tamaño. ¿Continuar de tódolos xeitos?"
#: diskdrake/interactive.pm:417
#, c-format
msgid "Trying to rescue partition table"
msgstr "Intentando recupera-la táboa de particións"
#: diskdrake/interactive.pm:423
#, c-format
msgid "Detailed information"
msgstr "Información detallada"
#: diskdrake/interactive.pm:438 diskdrake/interactive.pm:743
#, c-format
msgid "Resize"
msgstr "Redimensionar"
#: diskdrake/interactive.pm:439
#, c-format
msgid "Format"
msgstr "Formatar"
#: diskdrake/interactive.pm:441
#, c-format
msgid "Add to RAID"
msgstr "Engadir ó RAID"
#: diskdrake/interactive.pm:442
#, c-format
msgid "Add to LVM"
msgstr "Engadir ó LVM"
#: diskdrake/interactive.pm:445
#, c-format
msgid "Remove from RAID"
msgstr "Quitar do RAID"
#: diskdrake/interactive.pm:446
#, c-format
msgid "Remove from LVM"
msgstr "Quitar do LVM"
#: diskdrake/interactive.pm:447
#, c-format
msgid "Modify RAID"
msgstr "Modifica-lo RAID"
#: diskdrake/interactive.pm:448
#, c-format
msgid "Use for loopback"
msgstr "Usar para loopback"
#: diskdrake/interactive.pm:497
#, c-format
msgid "Create a new partition"
msgstr "Crear unha nova partición"
#: diskdrake/interactive.pm:500
#, c-format
msgid "Start sector: "
msgstr "Sector inicial: "
#: diskdrake/interactive.pm:502 diskdrake/interactive.pm:899
#, c-format
msgid "Size in MB: "
msgstr "Tamaño en MB: "
#: diskdrake/interactive.pm:503 diskdrake/interactive.pm:900
#, c-format
msgid "Filesystem type: "
msgstr "Tipo de sistema de ficheiros: "
#: diskdrake/interactive.pm:508
#, c-format
msgid "Preference: "
msgstr "Preferencia: "
#: diskdrake/interactive.pm:511
#, c-format
msgid "Logical volume name "
msgstr "Nome do volume lóxico "
#: diskdrake/interactive.pm:541
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"Non pode crear unha nova partición\n"
"(xa que alcanzou o número máximo de particións primarias).\n"
"Elimine primeiro unha partición primaria e cree unha partición extendida."
#: diskdrake/interactive.pm:571
#, c-format
msgid "Remove the loopback file?"
msgstr "Eliminar o ficheiro de loopback?"
#: diskdrake/interactive.pm:590
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Ó cambia-lo tipo de partición %s, perderanse tódolos datos da partición"
#: diskdrake/interactive.pm:602
#, c-format
msgid "Change partition type"
msgstr "Cambia-lo tipo de partición"
#: diskdrake/interactive.pm:603 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "¿Qué sistema de ficheiros desexa?"
#: diskdrake/interactive.pm:611
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "Cambiando de ext2 a ext3"
#: diskdrake/interactive.pm:640
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "Onde desexa monta-lo ficheiro de loopback %s?"
#: diskdrake/interactive.pm:641
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "¿Onde desexa monta-lo dispositivo %s?"
#: diskdrake/interactive.pm:646
#, fuzzy, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Non se pode quita-lo punto de montaxe porque esta partición estase a\n"
"usar para loopback.\n"
"Quite primeiro o loopback"
#: diskdrake/interactive.pm:671
#, c-format
msgid "Where do you want to mount %s?"
msgstr "¿Onde desexa montar %s?"
#: diskdrake/interactive.pm:695 diskdrake/interactive.pm:774
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "Redimensionando"
#: diskdrake/interactive.pm:695
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "Calculando os límites do sistema de ficheiros FAT"
#: diskdrake/interactive.pm:731
#, c-format
msgid "This partition is not resizeable"
msgstr "Esta partición non se pode redimensionar"
#: diskdrake/interactive.pm:736
#, c-format
msgid "All data on this partition should be backed-up"
msgstr ""
"Debería facer unha copia de seguridade de tódolos datos desta partición"
#: diskdrake/interactive.pm:738
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "Ó redimensiona-la partición %s, perderanse tódolos datos da partición"
#: diskdrake/interactive.pm:743
#, c-format
msgid "Choose the new size"
msgstr "Escolla o novo tamaño"
#: diskdrake/interactive.pm:744
#, c-format
msgid "New size in MB: "
msgstr "Novo tamaño en MB: "
#: diskdrake/interactive.pm:787 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
"Para asegurar a integridade dos datos despois de redimensionar a(s) partición"
"(s), \n"
"executaranse unhas verificacións do sistema de ficheiros a próxima vez que "
"arrinque Windows(TM)"
#: diskdrake/interactive.pm:825
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "Escolla un dos RAID para engadirlla"
#: diskdrake/interactive.pm:827 diskdrake/interactive.pm:844
#, c-format
msgid "new"
msgstr "novo"
#: diskdrake/interactive.pm:842
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "Escolla un dos LVM para engadirlla"
#: diskdrake/interactive.pm:848
#, c-format
msgid "LVM name?"
msgstr "¿Nome do LVM?"
#: diskdrake/interactive.pm:884
#, c-format
msgid "This partition can not be used for loopback"
msgstr "Esta partición non pode usarse para loopback"
#: diskdrake/interactive.pm:897
#, c-format
msgid "Loopback"
msgstr "Loopback"
#: diskdrake/interactive.pm:898
#, c-format
msgid "Loopback file name: "
msgstr "Nome do ficheiro loopback: "
#: diskdrake/interactive.pm:903
#, c-format
msgid "Give a file name"
msgstr "Introduza un nome de ficheiro"
#: diskdrake/interactive.pm:906
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "O ficheiro xa está a ser usado por outro loopback, escolla outro"
#: diskdrake/interactive.pm:907
#, c-format
msgid "File already exists. Use it?"
msgstr "O ficheiro xa existe. ¿Quere usalo?"
#: diskdrake/interactive.pm:930
#, c-format
msgid "Mount options"
msgstr "Opcións de montaxe"
#: diskdrake/interactive.pm:937
#, c-format
msgid "Various"
msgstr ""
#: diskdrake/interactive.pm:1002
#, c-format
msgid "device"
msgstr "dispositivo"
#: diskdrake/interactive.pm:1003
#, c-format
msgid "level"
msgstr "nivel"
#: diskdrake/interactive.pm:1004
#, fuzzy, c-format
msgid "chunk size in KiB"
msgstr "tamaño do bloque de datos"
#: diskdrake/interactive.pm:1021
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "Teña coidado: esta operación é perigosa."
#: diskdrake/interactive.pm:1036
#, c-format
msgid "What type of partitioning?"
msgstr "¿Qué tipo de particionamento quere?"
#: diskdrake/interactive.pm:1074
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr ""
"Necesitará reiniciar o equipo para que a modificación sexa tomada en conta"
#: diskdrake/interactive.pm:1083
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "¡Escribirase no disco a táboa de particións da unidade %s!"
#: diskdrake/interactive.pm:1096
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "Ó formata-la partición %s, perderanse tódolos datos da partición"
#: diskdrake/interactive.pm:1112
#, c-format
msgid "Move files to the new partition"
msgstr "Despraza-los ficheiros á nova partición"
#: diskdrake/interactive.pm:1112
#, c-format
msgid "Hide files"
msgstr "Agocha-los ficheiros"
#: diskdrake/interactive.pm:1113
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"O directorio %s xa contén datos\n"
"(%s)"
#: diskdrake/interactive.pm:1124
#, c-format
msgid "Moving files to the new partition"
msgstr "Desprazando os ficheiros á nova partición"
#: diskdrake/interactive.pm:1128
#, c-format
msgid "Copying %s"
msgstr "Copiando %s"
#: diskdrake/interactive.pm:1132
#, c-format
msgid "Removing %s"
msgstr "Eliminando %s"
#: diskdrake/interactive.pm:1146
#, c-format
msgid "partition %s is now known as %s"
msgstr "o nome da partición %s é %s"
#: diskdrake/interactive.pm:1147
#, c-format
msgid "Partitions have been renumbered: "
msgstr ""
#: diskdrake/interactive.pm:1167 diskdrake/interactive.pm:1226
#, c-format
msgid "Device: "
msgstr "Dispositivo: "
#: diskdrake/interactive.pm:1168
#, c-format
msgid "Devfs name: "
msgstr "Nome devfs: "
#: diskdrake/interactive.pm:1169
#, c-format
msgid "Volume label: "
msgstr "Etiqueta de volume:"
#: diskdrake/interactive.pm:1170
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "Letra de unidade DOS: %s (aproximación)\n"
#: diskdrake/interactive.pm:1174 diskdrake/interactive.pm:1183
#: diskdrake/interactive.pm:1244
#, c-format
msgid "Type: "
msgstr "Tipo: "
#: diskdrake/interactive.pm:1178 install_steps_gtk.pm:296
#, c-format
msgid "Name: "
msgstr "Nome: "
#: diskdrake/interactive.pm:1185
#, c-format
msgid "Start: sector %s\n"
msgstr "Inicio: sector %s\n"
#: diskdrake/interactive.pm:1186
#, c-format
msgid "Size: %s"
msgstr "Tamaño: %s"
#: diskdrake/interactive.pm:1188
#, c-format
msgid ", %s sectors"
msgstr ", %s sectores"
#: diskdrake/interactive.pm:1190
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "Cilindros %d a %d\n"
#: diskdrake/interactive.pm:1191
#, c-format
msgid "Number of logical extents: %d"
msgstr ""
#: diskdrake/interactive.pm:1192
#, c-format
msgid "Formatted\n"
msgstr "Formatado\n"
#: diskdrake/interactive.pm:1193
#, c-format
msgid "Not formatted\n"
msgstr "Non formatado\n"
#: diskdrake/interactive.pm:1194
#, c-format
msgid "Mounted\n"
msgstr "Montado\n"
#: diskdrake/interactive.pm:1195
#, c-format
msgid "RAID %s\n"
msgstr "RAID %s\n"
#: diskdrake/interactive.pm:1197
#, c-format
msgid ""
"Loopback file(s):\n"
" %s\n"
msgstr ""
"Ficheiro(s) de loopback:\n"
" %s\n"
#: diskdrake/interactive.pm:1198
#, c-format
msgid ""
"Partition booted by default\n"
" (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Partición de arrinque por omisión\n"
" (para arrincar en MS-DOS, non para lilo)\n"
#: diskdrake/interactive.pm:1200
#, c-format
msgid "Level %s\n"
msgstr "Nivel %s\n"
#: diskdrake/interactive.pm:1201
#, fuzzy, c-format
msgid "Chunk size %d KiB\n"
msgstr "Tamaño do bloque de datos %s\n"
#: diskdrake/interactive.pm:1202
#, c-format
msgid "RAID-disks %s\n"
msgstr "Discos RAID %s\n"
#: diskdrake/interactive.pm:1204
#, c-format
msgid "Loopback file name: %s"
msgstr "Nome do ficheiro loopback: %s"
#: diskdrake/interactive.pm:1207
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
#: diskdrake/interactive.pm:1210
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
#: diskdrake/interactive.pm:1227
#, c-format
msgid "Read-only"
msgstr "Só Lectura"
#: diskdrake/interactive.pm:1228
#, c-format
msgid "Size: %s\n"
msgstr "Tamaño: %s\n"
#: diskdrake/interactive.pm:1229
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Xeometría: %s cilindros, %s cabezas, %s sectores\n"
#: diskdrake/interactive.pm:1230
#, c-format
msgid "Info: "
msgstr "Información: "
#: diskdrake/interactive.pm:1231
#, c-format
msgid "LVM-disks %s\n"
msgstr "Discos LVM %s\n"
#: diskdrake/interactive.pm:1232
#, c-format
msgid "Partition table type: %s\n"
msgstr "Tipo de táboa de particións: %s\n"
#: diskdrake/interactive.pm:1233
#, fuzzy, c-format
msgid "on channel %d id %d\n"
msgstr "no bus %d id %d\n"
#: diskdrake/interactive.pm:1265
#, c-format
msgid "Filesystem encryption key"
msgstr "Clave de cifrado do sistema de ficheiros"
#: diskdrake/interactive.pm:1266
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "Escolla a clave de cifrado do seu sistema de ficheiros"
#: diskdrake/interactive.pm:1269
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
"Esta clave de cifrado é moi sinxela (ten que ter polo menos %d caracteres)"
#: diskdrake/interactive.pm:1270
#, c-format
msgid "The encryption keys do not match"
msgstr "As claves de cifrado non coinciden"
#: diskdrake/interactive.pm:1273 network/netconnect.pm:1136
#: standalone/drakconnect:397
#, c-format
msgid "Encryption key"
msgstr "Clave de cifrado"
#: diskdrake/interactive.pm:1274
#, c-format
msgid "Encryption key (again)"
msgstr "Clave de cifrado (outra vez)"
#: diskdrake/removable.pm:46
#, c-format
msgid "Change type"
msgstr "Cambia-lo tipo"
#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can not login using username %s (bad password?)"
msgstr ""
"Non se puido entrar usando o nome de usuario %s (¿era o contrasinal "
"correcto?)"
#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, fuzzy, c-format
msgid "Domain Authentication Required"
msgstr "Autenticación"
#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Which username"
msgstr "Qué nome de usuario"
#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Another one"
msgstr "Outro"
#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
"Por favor introduza o seu nome de usuario, contrasinal e nome de dominio "
"para acceder a este servidor."
#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3494
#, c-format
msgid "Username"
msgstr "Nome de usuario"
#: diskdrake/smbnfs_gtk.pm:205
#, c-format
msgid "Search servers"
msgstr "Buscar servidores"
#: diskdrake/smbnfs_gtk.pm:210
#, c-format
msgid "Search new servers"
msgstr "Buscar novos servidores"
#: do_pkgs.pm:16 do_pkgs.pm:31
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Necesitase instala-lo paquete %s. ¿Desexa instalalo?"
#: do_pkgs.pm:21 do_pkgs.pm:36
#, c-format
msgid "Mandatory package %s is missing"
msgstr ""
#: do_pkgs.pm:172
#, c-format
msgid "Installing packages..."
msgstr "Instalando paquetes..."
#: do_pkgs.pm:217
#, c-format
msgid "Removing packages..."
msgstr "Eliminando paquetes..."
#: fs.pm:487 fs.pm:536
#, c-format
msgid "Mounting partition %s"
msgstr "Montando a partición %s"
#: fs.pm:488 fs.pm:537
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "fallo ó monta-la partición %s no directorio %s"
#: fs.pm:508 fs.pm:515
#, c-format
msgid "Checking %s"
msgstr "Comprobando %s"
#: fs.pm:553 partition_table.pm:391
#, c-format
msgid "error unmounting %s: %s"
msgstr "erro desmontando %s: %s"
#: fs.pm:585
#, c-format
msgid "Enabling swap partition %s"
msgstr "Activando a partición de intercambio %s"
#: fs/format.pm:44 fs/format.pm:51
#, c-format
msgid "Formatting partition %s"
msgstr "Formatando a partición %s"
#: fs/format.pm:48
#, c-format
msgid "Creating and formatting file %s"
msgstr "Creando e formatando o ficheiro %s"
#: fs/format.pm:83
#, c-format
msgid "I do not know how to format %s in type %s"
msgstr "Descoñécese o xeito de formatar %s de tipo %s"
#: fs/format.pm:88 fs/format.pm:90
#, c-format
msgid "%s formatting of %s failed"
msgstr "O formato %s de %s fallou"
#: fs/mount_options.pm:112
#, fuzzy, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""
"Non actualizar as horas de acceso ó inodos neste sistema de ficheiros\n"
"(p.ex, para un acceso máis rápido on the news spool to speed up news "
"servers)."
#: fs/mount_options.pm:115
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""
#: fs/mount_options.pm:118
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""
#: fs/mount_options.pm:120
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""
"Non permitir a execución de binarios no sistema de ficheiros que\n"
"se montou. Esta opción pode ser útil para un servidor que ten sistemas de "
"ficheiros\n"
"que conteñen binarios para arquitecturas diferentes da súa."
#: fs/mount_options.pm:124
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""
#: fs/mount_options.pm:128
#, c-format
msgid "Mount the file system read-only."
msgstr "Monta-lo sistema de ficheiros coma de só lectura."
#: fs/mount_options.pm:130
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr ""
#: fs/mount_options.pm:134
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""
#: fs/mount_options.pm:142
#, c-format
msgid "Give write access to ordinary users"
msgstr "Darlle acceso de escritura ós usuarios normais"
#: fs/mount_options.pm:144
#, c-format
msgid "Give read-only access to ordinary users"
msgstr "Darlle acceso de só lectura ós usuarios normais"
#: fs/type.pm:370
#, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr "Non pode usar JFS para particións máis pequenas de 16MB"
#: fs/type.pm:371
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr "Non pode usar ReiserFS para particións máis pequenas de 32MB"
#: fsedit.pm:25
#, c-format
msgid "with /usr"
msgstr "con /usr"
#: fsedit.pm:30
#, c-format
msgid "server"
msgstr "servidor"
#: fsedit.pm:184
#, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :"
"(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"Non se pode le-la táboa de particións do dispositivo %s, está demasiado "
"deteriorada :(\n"
"Pódese probar baleirando as particións erróneas (¡Perderanse TODOLOS "
"datos!).\n"
"A outra solución é impedir que o DrakX modifique a táboa de particións.\n"
"(o erro é %s)\n"
"\n"
"¿Está de acordo ca perda de tódalas particións?\n"
#: fsedit.pm:401
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "Os puntos de montaxe deben comezar por /"
#: fsedit.pm:402
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "Os puntos de montaxe só poden conter caracteres alfanuméricos"
#: fsedit.pm:403
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Xa existe unha partición co punto de montaxe %s\n"
#: fsedit.pm:405
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"Seleccionou unha partición RAID por software coma raíz (/).\n"
"Non hai ningún cargador de arrinque capaz de manexar isto\n"
"sen unha partición /boot.\n"
"Asegúrese de engadir unha partición /boot"
#: fsedit.pm:408
#, c-format
msgid "You can not use a LVM Logical Volume for mount point %s"
msgstr "Non pode usar un Volume Lóxico LVM para o punto de montaxe %s"
#: fsedit.pm:410
#, c-format
msgid ""
"You've selected a LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"Seleccionou un Volume Lóxico LVM coma raíz (/).\n"
"O cargador de arrinque non é capaz de manexar isto sen unha\n"
"partición /boot.\n"
"Asegúrese de engadir unha partición /boot"
#: fsedit.pm:413
#, c-format
msgid ""
"You may not be able to install lilo (since lilo does not handle a LV on "
"multiple PVs)"
msgstr ""
#: fsedit.pm:416 fsedit.pm:418
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "Este directorio debería permanecer dentro do sistema de ficheiros raíz"
#: fsedit.pm:420 fsedit.pm:422
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"Necesita un sistema de ficheiros real (ext2/ext3, reiserfs, xfs, ou jfs) "
"para este punto de montaxe\n"
#: fsedit.pm:424
#, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr ""
"Non pode usar un sistema de ficheiros cifrado para o punto de montaxe %s"
#: fsedit.pm:485
#, fuzzy, c-format
msgid "Not enough free space for auto-allocating"
msgstr "Non hai espacio libre dabondo para asignar novas particións"
#: fsedit.pm:487
#, c-format
msgid "Nothing to do"
msgstr "Nada que facer"
#: harddrake/data.pm:61 install_any.pm:1505
#, c-format
msgid "Floppy"
msgstr "Disquete"
#: harddrake/data.pm:71
#, c-format
msgid "Zip"
msgstr "Zip"
#: harddrake/data.pm:81 install_any.pm:1506
#, c-format
msgid "Hard Disk"
msgstr "Disco"
#: harddrake/data.pm:90 install_any.pm:1507
#, c-format
msgid "CDROM"
msgstr "CDROM"
#: harddrake/data.pm:100
#, c-format
msgid "CD/DVD burners"
msgstr "Gravadoras de CD/DVD"
#: harddrake/data.pm:110
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"
#: harddrake/data.pm:120 standalone/drakbackup:2051
#, c-format
msgid "Tape"
msgstr "Cinta"
#: harddrake/data.pm:129
#, c-format
msgid "Videocard"
msgstr "Tarxeta de Video"
#: harddrake/data.pm:139
#, c-format
msgid "Tvcard"
msgstr "Tarxeta de TV"
#: harddrake/data.pm:148
#, c-format
msgid "Other MultiMedia devices"
msgstr "Outros dispositivos MultiMedia"
#: harddrake/data.pm:157
#, c-format
msgid "Soundcard"
msgstr "Tarxeta de Son"
#: harddrake/data.pm:166
#, c-format
msgid "Webcam"
msgstr "Webcam"
#: harddrake/data.pm:180
#, c-format
msgid "Processors"
msgstr "Procesadores"
#: harddrake/data.pm:190
#, c-format
msgid "ISDN adapters"
msgstr "Adaptadores RDSI"
#: harddrake/data.pm:200
#, c-format
msgid "Ethernetcard"
msgstr "Tarxeta Ethernet"
#: harddrake/data.pm:218 network/netconnect.pm:518
#, c-format
msgid "Modem"
msgstr "Módem"
#: harddrake/data.pm:228
#, c-format
msgid "ADSL adapters"
msgstr "Adaptadores ADSL"
#: harddrake/data.pm:242
#, c-format
msgid "Memory"
msgstr "Memoria"
#: harddrake/data.pm:251
#, c-format
msgid "AGP controllers"
msgstr "Controladoras AGP"
#: harddrake/data.pm:260 help.pm:186 help.pm:855
#: install_steps_interactive.pm:978
#, c-format
msgid "Printer"
msgstr "Impresora"
#: harddrake/data.pm:270
#, c-format
msgid "Joystick"
msgstr "Joystick"
#: harddrake/data.pm:280
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "Controladoras (E)IDE/ATA"
#: harddrake/data.pm:289
#, c-format
msgid "SATA controllers"
msgstr "Controladores SATA"
#: harddrake/data.pm:298
#, c-format
msgid "Firewire controllers"
msgstr "Controladoras Firewire"
#: harddrake/data.pm:307
#, c-format
msgid "PCMCIA controllers"
msgstr "Controladoras PCMCIA"
#: harddrake/data.pm:316
#, c-format
msgid "SCSI controllers"
msgstr "Controladoras SCSI"
#: harddrake/data.pm:325
#, c-format
msgid "USB controllers"
msgstr "Controladoras USB"
#: harddrake/data.pm:334
#, c-format
msgid "USB ports"
msgstr "Portos USB"
#: harddrake/data.pm:343
#, c-format
msgid "SMBus controllers"
msgstr "Controladores SMBus"
#: harddrake/data.pm:352
#, c-format
msgid "Bridges and system controllers"
msgstr ""
#: harddrake/data.pm:361
#, c-format
msgid "UPS"
msgstr "SAI"
#: harddrake/data.pm:370 help.pm:855 install_steps_interactive.pm:118
#: install_steps_interactive.pm:938 standalone/keyboarddrake:28
#, c-format
msgid "Keyboard"
msgstr "Teclado"
#: harddrake/data.pm:383 help.pm:855 install_steps_interactive.pm:971
#, c-format
msgid "Mouse"
msgstr "Rato"
#: harddrake/data.pm:397
#, c-format
msgid "Scanner"
msgstr "Escáner"
#: harddrake/data.pm:407 standalone/harddrake2:439
#, c-format
msgid "Unknown/Others"
msgstr "Descoñecidos/Outros"
#: harddrake/data.pm:435
#, c-format
msgid "cpu # "
msgstr "cpu # "
#: harddrake/sound.pm:191 standalone/drakconnect:169
#: standalone/drakconnect:615
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "Por Favor, Agarde... Aplicando a configuración"
#: harddrake/sound.pm:227
#, c-format
msgid "No alternative driver"
msgstr "Non hai driver alternativo"
#: harddrake/sound.pm:228
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
#: harddrake/sound.pm:234
#, c-format
msgid "Sound configuration"
msgstr "Configuración do son"
#: harddrake/sound.pm:236
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
"Aquí pode seleccionar un driver alternativo (tanto OSS coma ALSA) para a súa "
"tarxeta de son (%s)."
#. -PO: here the first %s is either "OSS" or "ALSA",
#. -PO: the second %s is the name of the current driver
#. -PO: and the third %s is the name of the default driver
#: harddrake/sound.pm:241
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"A tarxeta está usando o driver %s\"%s\" (o driver predeterminado da tarxeta "
"é \"%s\")"
#: harddrake/sound.pm:243
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
#, c-format
msgid "Driver:"
msgstr "Driver:"
#: harddrake/sound.pm:262
#, c-format
msgid "Trouble shooting"
msgstr ""
#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1039
#: network/netconnect.pm:504 printer/printerdrake.pm:1142
#: printer/printerdrake.pm:2142 printer/printerdrake.pm:2228
#: printer/printerdrake.pm:2274 printer/printerdrake.pm:2341
#: printer/printerdrake.pm:2376 printer/printerdrake.pm:2684
#: printer/printerdrake.pm:2691 printer/printerdrake.pm:3643
#: printer/printerdrake.pm:3970 printer/printerdrake.pm:4092
#: printer/printerdrake.pm:5183 standalone/drakTermServ:325
#: standalone/drakTermServ:1111 standalone/drakTermServ:1172
#: standalone/drakTermServ:1821 standalone/drakbackup:510
#: standalone/drakbackup:609 standalone/drakboot:165 standalone/drakclock:224
#: standalone/drakconnect:971 standalone/drakfloppy:291 standalone/drakups:27
#: standalone/scannerdrake:51 standalone/scannerdrake:940
#, c-format
msgid "Warning"
msgstr "Advertencia"
#: harddrake/sound.pm:270
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""
#: harddrake/sound.pm:278
#, c-format
msgid "No open source driver"
msgstr "Non hai un driver de código aberto"
#: harddrake/sound.pm:279
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"Non hai un driver libre para a súa tarxeta de son (%s), pero hai un driver "
"propietario en \"%s\"."
#: harddrake/sound.pm:282
#, c-format
msgid "No known driver"
msgstr "Driver descoñecido"
#: harddrake/sound.pm:283
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "Non hai ningún driver coñecido para a súa tarxeta de son (%s)"
#: harddrake/sound.pm:287
#, c-format
msgid "Unknown driver"
msgstr "Driver descoñecido"
#: harddrake/sound.pm:288
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr ""
#: harddrake/sound.pm:302
#, c-format
msgid "Sound trouble shooting"
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:305
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
#: harddrake/sound.pm:331
#, c-format
msgid "Let me pick any driver"
msgstr "Déixeme escoller un driver calquera"
#: harddrake/sound.pm:334
#, c-format
msgid "Choosing an arbitrary driver"
msgstr "Escolleando un driver ó chou"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:337
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
"Se sabe cal driver é o axeitado para a súa tarxeta\n"
"pode escollelo na lista de enriba.\n"
"\n"
"O driver actual para a súa tarxeta de son \"%s\" é \"%s\" "
#: harddrake/v4l.pm:14
#, c-format
msgid "Auto-detect"
msgstr "Detección automática"
#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
#, c-format
msgid "Unknown|Generic"
msgstr "Descoñecido|Xenérico"
#: harddrake/v4l.pm:105
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr ""
#: harddrake/v4l.pm:106
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr ""
#: harddrake/v4l.pm:309
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
#: harddrake/v4l.pm:312
#, c-format
msgid "Card model:"
msgstr "Modelo de tarxeta:"
#: harddrake/v4l.pm:313
#, fuzzy, c-format
msgid "Tuner type:"
msgstr "Mudar o tipo de partición"
#: harddrake/v4l.pm:314
#, c-format
msgid "Number of capture buffers:"
msgstr ""
#: harddrake/v4l.pm:314
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr ""
#: harddrake/v4l.pm:316
#, fuzzy, c-format
msgid "PLL setting:"
msgstr "Formatando"
#: harddrake/v4l.pm:317
#, c-format
msgid "Radio support:"
msgstr ""
#: harddrake/v4l.pm:317
#, c-format
msgid "enable radio support"
msgstr ""
#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandrakelinux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""
"Antes de continuar, debe ler con coidado os termos da licenza. Esta\n"
"licenza cobre toda a distribución Mandrakelinux. Se está de acordo\n"
"con tódolos termos que contén, marque o cadro \"%s\". Se non o está,\n"
"prema no botón \"%s\" e reiniciarase o seu ordenador."
#: help.pm:14 install_steps_gtk.pm:552 install_steps_interactive.pm:92
#: install_steps_interactive.pm:731 standalone/drakautoinst:216
#, c-format
msgid "Accept"
msgstr "Aceptar"
#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be "
"authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"GNU/Linux é un sistema multiusuario o que significa que cada usuario pode\n"
"ter as súas propias preferencias, os seus propios ficheiros, etc. Pero a\n"
"diferencia de \"root\", que é o administrador do sistema, os usuarios que\n"
"engada agora non estarán autorizados para cambiar nada agás os seus\n"
"propios ficheiros e as súas propias configuracións, protexendo o sistema de\n"
"cambios involuntarios ou malintencionados que poderían afectar a todo o\n"
"sistema. Terá que crear como mínimo un usuario normal para vostede -- esta\n"
"é a conta que usará para o uso cotián e rutineiro. Ainda que é moi sinxelo\n"
"entrar no sistema coma \"root\" para facer calquera cousa, pode ser moi\n"
"perigoso! Un pequeno erro pode significar que o seu sistema non volva\n"
"funcionar nunca máis. Se un usuario normal comete un erro moi grave, o\n"
"peor que pode suceder é que perda algunha información, pero non\n"
"afectará a todo o sistema.\n"
"\n"
"O primeiro campo pregúntalle un nome real. Dende logo, isto non é\n"
"obrigatorio -- actualmente pode introducir o que queira. DrakX collerá a\n"
"primeira palabra que introduza neste campo e copiaraa ó campo\n"
"\"%s\", que é o nome que o usuario introducirá para entrar no\n"
"sistema. Se o desexa, pode non facer caso do predeterminado e cambiar\n"
"o nome de usuario. O seguinte paso é introducir un contrasinal. Dende\n"
"o punto de vista da seguridade, o contrasinal dun usuario sen\n"
"privilexios (normal) non é tan crucial coma o contrasinal de \"root\", pero\n"
"esa non é razón para descoidarse deixándoa en branco ou poñendo\n"
"unha moi fácil: despois de todo, os nosos ficheiros poden estar en perigo.\n"
"\n"
"Unha vez que clique en \"%s\", poderá engadir máis usuarios.\n"
"Engada un usuario para cada un dos seus amigos, o seu pai, a súa\n"
"irmá, etc. Prema \"%s\" cando remate de engadir os usuarios.\n"
"\n"
"Se preme o botón \"%s\" poderá cambiar a \"shell\" predeteminada\n"
"para ese usuario (bash por defecto).\n"
"\n"
"Cando remate de engadir os usuarios, diráselle que elixa o usuario que\n"
"entrará automáticamente no sistema cando se arrinca o ordenador. Se\n"
"lle interesa esta funcionalidade (e non lle preocupa moito a seguridade\n"
"local), elixa o usuario e o xestor de ventás que desexe, e despois clique\n"
"en \"%s\". Se non está interesado nesta funcionalidade,\n"
"desmarque o cadro \"%s\"."
#: help.pm:51 printer/printerdrake.pm:1595 printer/printerdrake.pm:1715
#, c-format
msgid "User name"
msgstr "Nome de usuario"
#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:233
#: install_steps_gtk.pm:689 interactive.pm:424 interactive/newt.pm:317
#: network/netconnect.pm:278 network/tools.pm:182 printer/printerdrake.pm:3581
#: standalone/drakTermServ:382 standalone/drakbackup:3946
#: standalone/drakbackup:4040 standalone/drakbackup:4057
#: standalone/drakbackup:4075 ugtk2.pm:506
#, c-format
msgid "Next"
msgstr "Seguinte"
#: help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:385
#, c-format
msgid "Advanced"
msgstr "Avanzado"
#: help.pm:54
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
#: help.pm:85
#, c-format
msgid ""
"The Mandrakelinux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""
"A instalación de Mandrakelinux distribúese en varios CDs. Se un\n"
"paquete dos seleccionados está noutro CD, o DrakX expulsará o CD\n"
"actual e diralle que insira o CD requirido. Se non ten o CD requirido a "
"man,\n"
"prema en \"%s\", e os paquetes correspondentes non se instalarán."
#: help.pm:92
#, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandrakelinux, and to make it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandrakelinux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
" Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""
#: help.pm:146 share/compssUsers.pl:23
#, c-format
msgid "Workstation"
msgstr "Estación de traballo"
#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
#: share/compssUsers.pl:164
#, c-format
msgid "Development"
msgstr "Desenvolvemento"
#: help.pm:146 share/compssUsers.pl:144
#, c-format
msgid "Graphical Environment"
msgstr "Entorno Gráfico"
#: help.pm:146 install_steps_gtk.pm:231 install_steps_interactive.pm:642
#, c-format
msgid "Individual package selection"
msgstr "Selección individual de paquetes"
#: help.pm:146 help.pm:588
#, c-format
msgid "Upgrade"
msgstr "Actualizar"
#: help.pm:146 install_steps_interactive.pm:600
#, c-format
msgid "With X"
msgstr "Con X"
#: help.pm:146
#, c-format
msgid "With basic documentation"
msgstr "Con documentación básica"
#: help.pm:146
#, c-format
msgid "Truly minimal install"
msgstr "Instalación minima de verdade"
#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandrakelinux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandrakelinux was\n"
"finalized. If you do not know what a particular service is supposed to do "
"or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""
#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:792
#: interactive.pm:149 modules/interactive.pm:71 standalone/drakbackup:2508
#: standalone/draksec:54 standalone/harddrake2:306 standalone/net_applet:255
#: ugtk2.pm:899 wizards.pm:156
#, c-format
msgid "No"
msgstr "Non"
#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:792 interactive.pm:149
#: modules/interactive.pm:71 printer/printerdrake.pm:736
#: standalone/drakbackup:2508 standalone/drakgw:287 standalone/drakgw:288
#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
#: standalone/harddrake2:305 standalone/net_applet:259 ugtk2.pm:899
#: wizards.pm:156
#, c-format
msgid "Yes"
msgstr "Si"
#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr ""
#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""
"\"%s\": premendo no botón \"%s\" abrirase o asistente de configuración de\n"
"impresoras. Consulte o capitulo correspondente da ``Guía de Inicio'' para "
"obter\n"
"máis información acerca de como configurar unha nova impresora. A interface\n"
"presente no manual é semellante á que se usa durante a instalación."
#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:607
#: standalone/drakbackup:2333 standalone/drakbackup:2337
#: standalone/drakbackup:2341 standalone/drakbackup:2345
#, c-format
msgid "Configure"
msgstr "Configurar"
#: help.pm:189
#, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not "
"need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""
"Este diálogo úsase para seleccionar que servicios quere que arrinquen ó\n"
"iniciar o sistema.\n"
"\n"
"DrakX listará tódolos servicios dispoñibles na instalación actual. Examine\n"
"cada un deles coidadosamente e desmarque aqueles que non son\n"
"necesarios ó iniciar o sistema.\n"
"\n"
"Cando seleccione un servicio amosarase un pequeno texto explicatorio\n"
"sobre o servicio. Sen embargo, se non está seguro sobre se un servicio\n"
"é útil ou non, é mellor deixalo como estea.\n"
"\n"
"¡¡ Sexa especialmente coidadoso neste paso se pretende utiliza-la súa\n"
"máquina coma un servidor: probablemente non quererá arrincar servicios que\n"
"non precisa. Lembre que algúns servicios poden ser perigosos se están\n"
"activados nun servidor. En xeral, seleccione só aqueles servicios que\n"
"necesite de verdade !!"
#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""
#: help.pm:217 install_steps_interactive.pm:873
#, c-format
msgid "Hardware clock set to GMT"
msgstr "O reloxo interno do ordenador usa a hora GMT"
#: help.pm:217
#, c-format
msgid "Automatic time synchronization"
msgstr "Sincronización automática da hora"
#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""
"Tarxeta Gráfica\n"
"\n"
" Normalmente o instalador detecta automáticamente detecta e configura\n"
"a tarxeta gráfica instalada no ordenador. Se non é a correcta, pode elixir\n"
"nesta lista a tarxeta gráfica que está conectada ó ordenador.\n"
"\n"
" Se hai varios servidores dispoñibles para a súa tarxeta, con ou sen\n"
"aceleración 3D, terá que elixir o servidor que se axusta mellor ás súas "
"necesidades."
#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrakelinux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
" Depending on your hardware, this entry might not appear.\n"
"\n"
" The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
" This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""
"Monitor\n"
"\n"
" O instalador normalmente detecta automáticamente detecta e configura o\n"
"monitor conectado ó seu ordenador. Se non é o correcto, pode elixir nesta\n"
"lista o monitor que ten conectado ó seu ordenador."
#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""
"Resolución\n"
"\n"
" Aquí pode escoller as resolucións e as profundidades de cor dispoñibles "
"para\n"
"o seu hardware gráfico. Escolla o que mellor se axuste ás súas necesidades\n"
"(poderá facer trocos despois da instalación). Amosarase un exemplo da\n"
"configuración elixida na pantalla."
#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""
"Se se da a situación na que hai diferentes servidores dispoñibles para a\n"
"súa tarxeta, con ou sen aceleración 3D, poderá elixir o servidor que mellor\n"
"cubra as súas necesidades."
#: help.pm:308
#, c-format
msgid ""
"Options\n"
"\n"
" This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"Opcións\n"
"\n"
" Estes pasos permítenlle escoller se a súa máquina debe iniciar\n"
"automáticamente unha interface gráfica ó arrincar ou non. Obviamente,\n"
"vostede pode querer desmarcar \"%s\" se a súa máquina vai actuar\n"
"coma un servidor, ou se non tivo éxito configurando o contorno gráfico."
#: help.pm:316
#, c-format
msgid ""
"You now need to decide where you want to install the Mandrakelinux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandrakelinux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandrakelinux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandrakelinux system, choose\n"
"this option. Be careful, because you will not be able to undo this "
"operation\n"
"after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
"Agora ten que decidir onde quere instalar o sistema operativo\n"
"Mandrakelinux no disco duro. Se o seu disco duro está baleiro, ou se\n"
"outro sistema operativo está usando todo o espacio dispoñible, terá que\n"
"particionalo. Básicamente, particionar un disco duro consiste en dividilo\n"
"lóxicamente para crear o espacio necesario para instalar o seu novo\n"
"sistema Mandrakelinux.\n"
"\n"
"Debido a que o proceso de particionamento é normalmente irreversible\n"
"e pode provocar perdas de datos, o particionamento pode intimidar e\n"
"resultar estresante para un usuario sen experiencia. Afortunadamente,\n"
"DrakX inclúe un asistente que simplifica este proceso. Antes de\n"
"continuar con este paso, lea toda esta sección e sobre todo, tómese\n"
"o seu tempo.\n"
"\n"
"Dependendo da configuración do seu disco duro, hai varias opcións\n"
"dispoñibles:\n"
"\n"
" * \"%s\". Esta opción levará a cabo un particionamento automático\n"
"da(s) súa(s) unidade(s) baleira(s). Se usa esta opción non haberá máis\n"
"avisos.\n"
"\n"
" * \"%s\". O asistente detectou que existen unha ou máis particións\n"
"Linux no seu disco duro. Se desexa usalas, elixa esta opción. Entón\n"
"diráselle que escolla os puntos de montaxe asociados con cada unha\n"
"das particións. Os puntos de montaxe herdados selecciónanse por\n"
"defecto, e para a maioría é boa idea mantelos.\n"
" \n"
" * \"%s\". Se Microsoft Windows está instalado no seu disco duro e\n"
"ocupa todo o espacio dispoñible nel, terá que crear espacio libre para\n"
"GNU/Linux. Para facelo, pode eliminar os datos e a partición Microsoft\n"
"Windows (mire a solución ``Borrar todo o disco'') ou redimensionar a\n"
"partición Microsoft Windows FAT ou NTFS. O redimensionamento\n"
"pode levarse a cabo sen a perda de ningún dato, con tal que\n"
"desfragmente previamente a partición Windows. É moi recomendable\n"
"que faga unha copia de seguridade dos seus datos. Recoméndase\n"
"usar esta opción se desexa usar Mandrakelinux e Microsoft\n"
"Windows no mesmo ordenador.\n"
"\n"
" Antes de escoller esta opción, debe comprender que despois deste\n"
"procedemento, o tamaño da súa partición Microsoft Windows será máis\n"
"pequeno do que é agora. Terá menos espacio libre en Microsoft Windows\n"
"para almacenar os seus datos ou para instalar novo software.\n"
"\n"
" * \"%s\". Se desexa eliminar tódolos datos e as particións presentes no\n"
"seu disco duro e remprazalas polo seu novo sistema Mandrakelinux, elixa\n"
"esta opción. Teña coidado, porque non poderá desfacer esta operación\n"
"despois de que confirme.\n"
"\n"
" !! Se elixe esta opción, eliminaranse tódolos datos do seu disco "
"duro. !!\n"
"\n"
" * \"%s\". Esta opción aparece cando Microsoft Windows colleu todo o\n"
"disco duro. Se elixe esta opción simplemente eliminarase toda a unidade\n"
"e comezarase de novo, particionando todo dende cero.\n"
"\n"
" !! Se elixe esta opción, perderanse tódolos datos do seu disco duro. !!\n"
"\n"
" * \"%s\". Elixa esta opción se desexa particionar a man o seu disco duro.\n"
"Teña tino -- é unha elección potente pero perigosa e pode perder moi\n"
"fácilmente tódolos seus datos. É por iso polo que só se recomenda esta\n"
"opción se fixo algo coma isto antes e ten algunha experiencia. Para máis\n"
"instruccións sobre como usar a utilidade DiskDrake, refírase á sección\n"
"``Administrando as súas Particións'' da ``Guía de Inicio''."
#: help.pm:374 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "Usar espacio libre"
#: help.pm:374
#, c-format
msgid "Use existing partition"
msgstr "Usar partición existente"
#: help.pm:374 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "Usa-lo espacio libre da partición de Windows"
#: help.pm:374 install_interactive.pm:213
#, c-format
msgid "Erase entire disk"
msgstr "Borra-lo disco enteiro"
#: help.pm:374
#, c-format
msgid "Remove Windows"
msgstr "Elimina-lo Windows"
#: help.pm:374 install_interactive.pm:228
#, c-format
msgid "Custom disk partitioning"
msgstr "Particionamento de disco personalizado"
#: help.pm:377
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
" Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
" * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
" * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
" This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""
#: help.pm:409
#, c-format
msgid "Generate auto-install floppy"
msgstr "Xerar un disquete de auto-instalación"
#: help.pm:409 install_steps_interactive.pm:1328
#, c-format
msgid "Replay"
msgstr "Reproducir"
#: help.pm:409 install_steps_interactive.pm:1328
#, c-format
msgid "Automated"
msgstr "Automatizada"
#: help.pm:409 install_steps_interactive.pm:1331
#, c-format
msgid "Save packages selection"
msgstr "Garda-la selección de paquetes"
#: help.pm:412
#, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
"reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"will not be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandrakelinux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""
#: help.pm:431 install_steps_gtk.pm:388 interactive.pm:425
#: interactive/newt.pm:316 printer/printerdrake.pm:3579
#: standalone/drakTermServ:361 standalone/drakbackup:3906
#: standalone/drakbackup:3945 standalone/drakbackup:4056
#: standalone/drakbackup:4071 ugtk2.pm:504
#, c-format
msgid "Previous"
msgstr "Anterior"
#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandrakelinux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""
#: help.pm:444 help.pm:588 install_steps_gtk.pm:387
#: install_steps_interactive.pm:156 standalone/drakbackup:4103
#, c-format
msgid "Install"
msgstr "Instalar"
#: help.pm:447
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandrakelinux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""
#: help.pm:458
#, c-format
msgid "Security Administrator"
msgstr "Administrador de Seguridade"
#: help.pm:461
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrakelinux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it does not always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
#: help.pm:530
#, c-format
msgid "Removable media auto-mounting"
msgstr "Montar automáticamente os soportes extraíbles"
#: help.pm:530
#, c-format
msgid "Toggle between normal/expert mode"
msgstr "Cambiar entre modo normal/experto"
#: help.pm:533
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandrakelinux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country is not in "
"the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""
"\"%s\": verifique a selección actual do país. Se non está nese país,\n"
"prema no botón \"%s\" e escolla o seu. Se o seu país non está na lista\n"
"que se amosa, prema no botón \"%s\" para obter a lista completa de paises."
#: help.pm:569
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandrakelinux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandrakelinux system. Your current partitioning\n"
"scheme and user data will not be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandrakelinux systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mandrakelinux version \"8.1\" is not recommended."
msgstr ""
#: help.pm:591
#, c-format
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
#: help.pm:609
#, c-format
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandrakelinux's use of UTF-8 will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""
#: help.pm:647
#, c-format
msgid "Espanol"
msgstr "Español"
#: help.pm:650
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
"Test the buttons and check that the mouse pointer moves on-screen as you\n"
"move your mouse about."
msgstr ""
#: help.pm:681
#, c-format
msgid "with Wheel emulation"
msgstr "con emulación da Roda"
#: help.pm:681
#, c-format
msgid "Universal | Any PS/2 & USB mice"
msgstr "Universal | Calquera rato PS/2 & USB"
#: help.pm:684
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"Seleccione o porto correcto. Por exemplo, o porto\n"
"\"COM1\" de Windows chámase \"ttyS0\" en GNU/Linux."
#: help.pm:688
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you must enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That's why you must choose a password which is difficult to\n"
"guess: DrakX will tell you if the password you chose is too simple. As you\n"
"can see, you're not forced to enter a password, but we strongly advise\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise your system.\n"
"\n"
"One caveat: do not make the password too long or too complicated because "
"you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it. To reduce the\n"
"chance of a blind typing error you'll need to enter the password twice. If\n"
"you do happen to make the same typing error twice, you'll have to use this\n"
"``incorrect'' password the first time you'll try to connect as \"root\".\n"
"\n"
"If you want an authentication server to control access to your computer,\n"
"click on the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, or if your\n"
"computer will never be connected to the Internet and you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
#: help.pm:722
#, c-format
msgid "authentication"
msgstr "autenticación"
#: help.pm:725
#, c-format
msgid ""
"A boot loader is a little program which is started by the computer at boot\n"
"time. It's responsible for starting up the whole system. Normally, the boot\n"
"loader installation is totally automated. DrakX will analyze the disk boot\n"
"sector and act according to what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
"OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
"\n"
"If DrakX can not determine where to place the boot sector, it'll ask you\n"
"where it should place it. Generally, the \"%s\" is the safest place.\n"
"Choosing \"%s\" will not install any boot loader. Use this option only if "
"you\n"
"know what you're doing."
msgstr ""
"Un cargador de arrinqueé un pequeno programa que inicia o ordenador ó\n"
"arrincar. É o responsable de arrincar o sistema enteiro. Normalmente, a\n"
"instalación do cargador de arrinque é totalmente automática. DrakX\n"
"analisará o sector de arrinque do disco e actuará de acordo co que atope\n"
"alí:\n"
"\n"
" * se atopa un sector de arrinque de Windows, remprazarao cun sector de\n"
"arrinque de GRUB/LILO. Deste xeito poderá arrincar GNU/Linux ou\n"
"calquera outro sistema operativo que teña instalado no seu ordenador.\n"
" * se atopa un sector de arrinque de GRUB ou LILO, remprazarao cun novo.\n"
"\n"
"Se DrakX non pode determinar onde debe situar o sector de arrinque, \n"
"preguntaralle onde o debe situar. Xeralmente, \"%s\" é o mellor lugar.\n"
"Se escolle \"%s\" non se instalará ningún cargador de arrinque. Use esta\n"
"opción só se sabe o que está facendo."
#: help.pm:742
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other\n"
"operating systems may offer you one, but Mandrakelinux offers two. Each of\n"
"the printing systems is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"within networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
"choice for printing to your local printer or to one halfway around the\n"
"planet. It's simple to configure and can act as a server or a client for\n"
"the ancient \"lpd\" printing system, so it's compatible with older\n"
"operating systems which may still need print services. While quite\n"
"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
"\"%s\" includes graphical front-ends for printing or choosing printer\n"
"options and for managing the printer.\n"
"\n"
"If you make a choice now, and later find that you do not like your printing\n"
"system you may change it by running PrinterDrake from the Mandrakelinux\n"
"Control Center and clicking on the \"%s\" button."
msgstr ""
#: help.pm:765
#, c-format
msgid "pdq"
msgstr "pdq"
#: help.pm:765 printer/cups.pm:115 printer/data.pm:118
#, c-format
msgid "CUPS"
msgstr "CUPS"
#: help.pm:765
#, c-format
msgid "Expert"
msgstr "Experto"
#: help.pm:768
#, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
#: help.pm:786
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver."
msgstr ""
"\"%s\": se se detecta unha tarxeta de son no seu sistema, amosarase\n"
"aquí. Se ve que a tarxeta de son non é a que ten posta no seu sistema,\n"
"pode clicar no botón e escoller un driver diferente."
#: help.pm:788 help.pm:855 install_steps_interactive.pm:1005
#: install_steps_interactive.pm:1022
#, c-format
msgid "Sound card"
msgstr "Tarxeta de son"
#: help.pm:791
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has gathered\n"
"about your system. Depending on the hardware installed on your machine, you\n"
"may have some or all of the following entries. Each entry is made up of the\n"
"hardware item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"%s\" button to make the change.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you're not in this\n"
"country, click on the \"%s\" button and choose another. If your country\n"
"is not in the list shown, click on the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": verify the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to set up a new printer. The interface\n"
"presented in our manual is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver.\n"
"\n"
" * \"%s\": if you have a TV card, this is where information about its\n"
"configuration will be displayed. If you have a TV card and it is not\n"
"detected, click on \"%s\" to try to configure it manually.\n"
"\n"
" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
"the card if you feel the configuration is wrong.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if you wish to configure your Internet or local network access,\n"
"you can do so now. Refer to the printed documentation or use the\n"
"Mandrakelinux Control Center after the installation has finished to benefit\n"
"from full in-line help.\n"
"\n"
" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
"you're installing on is to be located behind a proxy server.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click this\n"
"button. This should be reserved to advanced users. Refer to the printed\n"
"documentation or the in-line help about bootloader configuration in the\n"
"Mandrakelinux Control Center.\n"
"\n"
" * \"%s\": through this entry you can fine tune which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""
#: help.pm:855 install_steps_interactive.pm:964 standalone/drakclock:100
#, c-format
msgid "Timezone"
msgstr "Zona horaria"
#: help.pm:855 install_steps_interactive.pm:1038
#, c-format
msgid "TV card"
msgstr "Tarxeta de TV"
#: help.pm:855
#, c-format
msgid "ISDN card"
msgstr "Tarxeta RDSI"
#: help.pm:855
#, c-format
msgid "Graphical Interface"
msgstr "Interface Gráfica"
#: help.pm:855 install_any.pm:1528 install_steps_interactive.pm:1056
#: standalone/drakbackup:2036
#, c-format
msgid "Network"
msgstr "Rede"
#: help.pm:855 install_steps_interactive.pm:1071
#, c-format
msgid "Proxies"
msgstr "Proxys"
#: help.pm:855 install_steps_interactive.pm:1082
#, c-format
msgid "Security Level"
msgstr "Nivel de Seguridade"
#: help.pm:855 install_steps_interactive.pm:1096
#, c-format
msgid "Firewall"
msgstr "Cortalumes"
#: help.pm:855 install_steps_interactive.pm:1110
#, c-format
msgid "Bootloader"
msgstr "Cargador de Arrinque"
#: help.pm:855 install_steps_interactive.pm:1123 services.pm:193
#, c-format
msgid "Services"
msgstr "Servicios"
#: help.pm:858
#, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandrakelinux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
"Elixa o disco duro que desexa borrar para poder crear a súa nova partición\n"
"Mandrakelinux. Teña tino, porque se perderán tódolos datos da unidade e\n"
"non se poderán volver recuperar!"
#: help.pm:863
#, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""
"Prema en \"%s\" se desexa borrar tódolos datos e particións presentes\n"
"neste disco duro. Teña tino, despois de premer en \"%s\", non poderá\n"
"recuperar ningún dato ou partición presente neste disco duro, incluindo\n"
"calquera dato de Windows.\n"
"\n"
"Prema en \"%s\" para saír sen perder ningún dato ou partición presentes\n"
"neste disco duro."
#: help.pm:869
#, c-format
msgid "Next ->"
msgstr "Seguinte ->"
#: help.pm:869
#, c-format
msgid "<- Previous"
msgstr "<- Anterior"
#: install2.pm:117
#, c-format
msgid ""
"Can not access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""
#: install2.pm:167
#, c-format
msgid "You must also format %s"
msgstr "Tamén debe formatar %s"
#: install_any.pm:376
#, fuzzy, c-format
msgid "Do you have further supplementary media?"
msgstr "¿Ten algunha outra?"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:379
#, fuzzy, c-format
msgid ""
"The following media have been found and will be used during install: %s.\n"
"\n"
"\n"
"Do you have a supplementary installation media to configure?"
msgstr "¿Ten algunha interface %s?"
#: install_any.pm:388 printer/printerdrake.pm:2929
#: printer/printerdrake.pm:2936 standalone/scannerdrake:182
#: standalone/scannerdrake:190 standalone/scannerdrake:241
#: standalone/scannerdrake:248
#, c-format
msgid "CD-ROM"
msgstr "CD-ROM"
#: install_any.pm:388
#, c-format
msgid "Network (http)"
msgstr "Rede (http)"
#: install_any.pm:388
#, c-format
msgid "Network (ftp)"
msgstr "Rede (ftp)"
#: install_any.pm:436 standalone/drakbackup:112
#, c-format
msgid "No device found"
msgstr "Non se atoparon dispositivos"
#: install_any.pm:440
#, c-format
msgid "Insert the CD"
msgstr "Insira o CD"
#: install_any.pm:445
#, c-format
msgid "Unable to mount CD-ROM"
msgstr ""
#: install_any.pm:468
#, c-format
msgid "Insert the CD 1 again"
msgstr "Insira o CD 1 outra vez"
#: install_any.pm:478 install_any.pm:482
#, c-format
msgid "URL of the mirror?"
msgstr "URL do sitio espello?"
#: install_any.pm:515
#, c-format
msgid ""
"Can't find a package list file on this mirror. Make sure the location is "
"correct."
msgstr "Non se puido atopar o ficheiro hdlist neste sitio espello"
#: install_any.pm:633
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done."
msgstr ""
"Cambie o Cd-Rom!\n"
"Insira o Cd-Rom que teña a etiqueta \"%s\" na unidade e prema Aceptar."
#: install_any.pm:652
#, fuzzy, c-format
msgid "Copying in progress"
msgstr "Detectando"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:783
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They do not have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:806
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
"Eliminaranse os seguintes paquetes para poder actualiza-lo seu sistema: %s\n"
"\n"
"\n"
"¿Desexa eliminar estes paquetes?\n"
#: install_any.pm:1214 partition_table.pm:603
#, c-format
msgid "Error reading file %s"
msgstr "Erro ó le-lo ficheiro %s"
#: install_any.pm:1425
#, fuzzy, c-format
msgid "The following disk(s) were renamed:"
msgstr "- eliminouse %s\n"
#: install_any.pm:1427
#, c-format
msgid "%s (previously named as %s)"
msgstr ""
#: install_any.pm:1465
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"Ocorreu un erro - non se atopou ningún dispositivo válido para crear novos "
"sistemas de ficheiros. Verifique o seu equipo para atopa-la razón deste "
"problema"
#: install_any.pm:1509
#, c-format
msgid "HTTP"
msgstr "HTTP"
#: install_any.pm:1509
#, c-format
msgid "FTP"
msgstr "FTP"
#: install_any.pm:1509
#, c-format
msgid "NFS"
msgstr "SMB"
#: install_any.pm:1532
#, fuzzy, c-format
msgid "Please choose a media"
msgstr "Escolla"
#: install_any.pm:1564
#, fuzzy, c-format
msgid "Bad media %s"
msgstr "engadiuse o soporte %s"
#: install_any.pm:1576
#, fuzzy, c-format
msgid "File already exists. Overwrite it?"
msgstr "O ficheiro xa existe. ¿Quere usalo?"
#: install_any.pm:1627
#, c-format
msgid "Can not make screenshots before partitioning"
msgstr "Non se pode captura-la pantalla antes de face-las particións"
#: install_any.pm:1634
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr ""
"Pode escoller outras linguas que estarán dispoñibles trala instalación en %s"
#: install_gtk.pm:136
#, c-format
msgid "System installation"
msgstr "Instalación do sistema"
#: install_gtk.pm:139
#, c-format
msgid "System configuration"
msgstr "Configuración do sistema"
#: install_interactive.pm:22
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"Algún hardware do seu ordenador necesita drivers ``propietarios''\n"
"para funcionar. Pode atopar máis información sobre eles en: %s"
#: install_interactive.pm:62
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Ten que ter unha partición raíz.\n"
"Para iso, cree unha partición (ou clique nunha que xa exista).\n"
"Entón escolla a acción ``Punto de montaxe'', e asócieo a `/'"
#: install_interactive.pm:67
#, c-format
msgid ""
"You do not have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"Non ten unha partición de intercambio\n"
"\n"
"¿Desexa continuar de calquera xeito?"
#: install_interactive.pm:70 install_steps.pm:211
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "Debe ter unha partición FAT montada en /boot/efi"
#: install_interactive.pm:97
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "Non hai espacio libre dabondo para asignar novas particións"
#: install_interactive.pm:105
#, c-format
msgid "Use existing partitions"
msgstr "Usar particións existentes"
#: install_interactive.pm:107
#, c-format
msgid "There is no existing partition to use"
msgstr "Non hai ningunha partición existente para usar"
#: install_interactive.pm:114
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "Usar a partición de Windows para loopback"
#: install_interactive.pm:117
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "¿Que partición desexa usar para Linux4Win?"
#: install_interactive.pm:119
#, c-format
msgid "Choose the sizes"
msgstr "Escolla os tamaños"
#: install_interactive.pm:120
#, c-format
msgid "Root partition size in MB: "
msgstr "Tamaño da partición raíz en MB: "
#: install_interactive.pm:121
#, c-format
msgid "Swap partition size in MB: "
msgstr "Tamaño da partición de intercambio en MB: "
#: install_interactive.pm:130
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
"Non hai particións FAT para usar coma loopback (ou non hai espacio nelas)"
#: install_interactive.pm:139
#, c-format
msgid "Which partition do you want to resize?"
msgstr "¿Qué partición desexa redimensionar?"
#: install_interactive.pm:153
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occurred: %s"
msgstr ""
"O redimensionador de FAT non é capaz de manexa-la súa partición,\n"
"ocorreu o seguinte erro: %s"
#: install_interactive.pm:156
#, c-format
msgid "Computing the size of the Windows partition"
msgstr "Calculando o tamaño da partición de Windows"
#: install_interactive.pm:163
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandrakelinux "
"installation."
msgstr ""
"A partición de Windows está demasiado fragmentada. Por favor reinicie o seu "
"sistema con Windows, execute a utilidade ``defrag'', e despois reinicie a "
"instalación de Mandrakelinux."
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_interactive.pm:166
#, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"¡ADVERTENCIA!\n"
"\n"
"O DrakX vai redimensiona-la partición de Windows agora. Teña coidado:\n"
"esta operación é perigosa. Se aínda non o fixo, necesita sair da\n"
"instalación primeiro, executar \"chkdsk c:\" nun Intérprete de Comandos\n"
"en Windows (Teña coidado, executa-lo programa gráfico \"scandisk\")\n"
"non é dabondo, ¡asegúrese de usar \"chkdsk\" nun Intérprete de\n"
"Comandos!), e opcionalmente o defrag, e reinicia-la instalación.\n"
"Tamén é aconsellable facer unha copia de seguridade dos seus datos.\n"
"Cando estea seguro, prema Aceptar."
#: install_interactive.pm:178
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "¿Que tamaño desexa manter para o Windows en"
#: install_interactive.pm:179
#, c-format
msgid "partition %s"
msgstr "partición %s"
#: install_interactive.pm:188
#, c-format
msgid "Resizing Windows partition"
msgstr "Redimensionando a partición de Windows"
#: install_interactive.pm:193
#, c-format
msgid "FAT resizing failed: %s"
msgstr "O redimensionamento da FAT fallou: %s"
#: install_interactive.pm:208
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""
"Non hai particións FAT para redimensionar (ou non hai espacio libre dabondo)"
#: install_interactive.pm:213
#, c-format
msgid "Remove Windows(TM)"
msgstr "Elimina-lo Windows(TM)"
#: install_interactive.pm:215
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
"Ten máis dunha unidade de disco duro, ¿en cal delas desexa instalar linux?"
#: install_interactive.pm:219
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "Perderanse TODALAS particións existentes e os seus datos na unidade %s"
#: install_interactive.pm:232
#, c-format
msgid "Use fdisk"
msgstr "Usar fdisk"
#: install_interactive.pm:235
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, do not forget to save using `w'"
msgstr ""
"Agora pode particionar %s.\n"
"Cando remate, non esqueza gardar usando `w'"
#: install_interactive.pm:271
#, c-format
msgid "I can not find any room for installing"
msgstr "Non se pode atopar espacio para a instalación"
#: install_interactive.pm:275
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "O Asistente de Particionamento do DrakX atopou as seguintes solucións:"
#: install_interactive.pm:281
#, c-format
msgid "Partitioning failed: %s"
msgstr "O particionamento fallou: %s"
#: install_interactive.pm:288
#, c-format
msgid "Bringing up the network"
msgstr "Activando a rede"
#: install_interactive.pm:293
#, c-format
msgid "Bringing down the network"
msgstr "Desactivando a rede"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:10
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the "
"Mandrakelinux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrakelinux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and \n"
"Mandrakesoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License, you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"Mandrakesoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of the use or "
"inability to use the Software \n"
"Products, even if Mandrakesoft S.A. has been advised of the possibility or "
"occurrence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, Mandrakesoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of "
"downloading software components \n"
"from one of Mandrakelinux sites which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities. Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to Mandrakesoft.\n"
"The programs developed by Mandrakesoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by Mandrakesoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"Mandrakesoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrakelinux\" and associated logos are trademarks of "
"Mandrakesoft S.A. \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact Mandrakesoft S.A. \n"
msgstr ""
#: install_messages.pm:90
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:98
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer, duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
#: install_messages.pm:131
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of "
"Mandrakelinux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrakelinux User's Guide."
msgstr ""
"Noraboa, rematou a instalación.\n"
"Quite o disco de arrinque da unidade e prema Intro para reiniciar.\n"
"\n"
"\n"
"Para información sobre parches dispoñibles para esta versión\n"
"de Mandrakelinux, consulte as erratas dispoñibles en:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Para información sobre a configuración do seu sistema, despois\n"
"da instalación, hai un capítulo na Guía de Usuario Oficial de Mandrakelinux."
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:144
#, c-format
msgid "http://www.mandrakelinux.com/en/101errata.php3"
msgstr "http://www.mandrakelinux.com/en/101errata.php3"
#: install_steps.pm:246
#, c-format
msgid "Duplicate mount point %s"
msgstr "Punto de montaxe %s duplicado"
#: install_steps.pm:479
#, c-format
msgid ""
"Some important packages did not get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
"\"\n"
msgstr ""
"Algúns paquetes importantes non se instalaron correctamente.\n"
"A unidade de cdrom ou o cdrom están defectuosos.\n"
"Comprobe o cdrom nun ordenador xa instalado usando \"rpm -qpl media/main/*."
"rpm\"\n"
#: install_steps.pm:599
#, c-format
msgid "No floppy drive available"
msgstr "Non hai ningunha disqueteira dispoñible"
#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
#, c-format
msgid "Entering step `%s'\n"
msgstr "Entrando na etapa '%s'\n"
#: install_steps_gtk.pm:177
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandrakelinux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"O seu sistema ten poucos recursos. Pode que teña algún problema\n"
"ó instala-lo Mandrakelinux. Se iso acontece, pode intenta-la instalación\n"
"en modo texto. Para iso, prema 'F1' cando arrinque o CDROM, e escriba\n"
"'text'."
#: install_steps_gtk.pm:224 install_steps_interactive.pm:624
#, c-format
msgid "Package Group Selection"
msgstr "Selección dos Grupos de Paquetes"
#: install_steps_gtk.pm:250 install_steps_interactive.pm:567
|