-* Wrapper function of \phpbb\request\request::variable which exists for backwards compatability.

-* See {@link \phpbb\request\request_interface::variable \phpbb\request\request_interface::variable} for

-* documentation of this function's use.

-*

-* @deprecated

-* @param mixed $var_name The form variable's name from which data shall be retrieved.

-* If the value is an array this may be an array of indizes which will give

-* direct access to a value at any depth. E.g. if the value of "var" is array(1 => "a")

-* then specifying array("var", 1) as the name will return "a".

-* If you pass an instance of {@link \phpbb\request\request_interface phpbb_request_interface}

-* as this parameter it will overwrite the current request class instance. If you do

-* not do so, it will create its own instance (but leave superglobals enabled).

-* @param mixed $default A default value that is returned if the variable was not set.

-* This function will always return a value of the same type as the default.

-* @param bool $multibyte If $default is a string this paramater has to be true if the variable may contain any UTF-8 characters

-* Default is false, causing all bytes outside the ASCII range (0-127) to be replaced with question marks

-* @param bool $cookie This param is mapped to \phpbb\request\request_interface::COOKIE as the last param for

-* \phpbb\request\request_interface::variable for backwards compatability reasons.

-* @param \phpbb\request\request_interface|null|false If an instance of \phpbb\request\request_interface is given the instance is stored in

-* a static variable and used for all further calls where this parameters is null. Until

-* the function is called with an instance it automatically creates a new \phpbb\request\request

-* instance on every call. By passing false this per-call instantiation can be restored

-* after having passed in a \phpbb\request\request_interface instance.

-*

-* @return mixed The value of $_REQUEST[$var_name] run through {@link set_var set_var} to ensure that the type is the

-* the same as that of $default. If the variable is not set $default is returned.

-*/

-function request_var($var_name, $default, $multibyte = false, $cookie = false, $request = null)

-{

- // This is all just an ugly hack to add "Dependency Injection" to a function

- // the only real code is the function call which maps this function to a method.

- static $static_request = null;

-

- if ($request instanceof \phpbb\request\request_interface)

- {

- $static_request = $request;

-

- if (empty($var_name))

- {

- return;

- }

- }

- else if ($request === false)

- {

- $static_request = null;

-

- if (empty($var_name))

- {

- return;

- }

- }

-

- $tmp_request = $static_request;

-

- // no request class set, create a temporary one ourselves to keep backwards compatability

- if ($tmp_request === null)

- {

- // false param: enable super globals, so the created request class does not

- // make super globals inaccessible everywhere outside this function.

- $tmp_request = new \phpbb\request\request(new \phpbb\request\type_cast_helper(), false);

- }

-

- return $tmp_request->variable($var_name, $default, $multibyte, ($cookie) ? \phpbb\request\request_interface::COOKIE : \phpbb\request\request_interface::REQUEST);

-}

-

-/**

-* Sets a configuration option's value.

-*

-* Please note that this function does not update the is_dynamic value for

-* an already existing config option.

-*

-* @param string $config_name The configuration option's name

-* @param string $config_value New configuration value

-* @param bool $is_dynamic Whether this variable should be cached (false) or

-* if it changes too frequently (true) to be

-* efficiently cached.

-*

-* @return null

-*

-* @deprecated

-*/

-function set_config($config_name, $config_value, $is_dynamic = false, \phpbb\config\config $set_config = null)

-{

- static $config = null;

-

- if ($set_config !== null)

- {

- $config = $set_config;

-

- if (empty($config_name))

- {

- return;

- }

- }

-

- $config->set($config_name, $config_value, !$is_dynamic);

-}

-

-/**

-* Increments an integer config value directly in the database.

-*

-* @param string $config_name The configuration option's name

-* @param int $increment Amount to increment by

-* @param bool $is_dynamic Whether this variable should be cached (false) or

-* if it changes too frequently (true) to be

-* efficiently cached.

-*

-* @return null

-*

-* @deprecated

-*/

-function set_config_count($config_name, $increment, $is_dynamic = false, \phpbb\config\config $set_config = null)

-{

- static $config = null;

-

- if ($set_config !== null)

- {

- $config = $set_config;

-

- if (empty($config_name))

- {

- return;

- }

- }

-

- $config->increment($config_name, $increment, !$is_dynamic);

-}

-

-/**

-* @param string $extra additional entropy

-function unique_id($extra = 'c')

- static $dss_seeded = false;

- global $config;

-

- $val = $config['rand_seed'] . microtime();

- $val = md5($val);

- $config['rand_seed'] = md5($config['rand_seed'] . $val . $extra);

-

- if ($dss_seeded !== true && ($config['rand_seed_last_update'] < time() - rand(1,10)))

- {

- set_config('rand_seed_last_update', time(), true);

- set_config('rand_seed', $config['rand_seed'], true);

- $dss_seeded = true;

- }

-

- return substr($val, 4, 16);

- $time = explode(' ', microtime());

- $current_time = $time[0] + $time[1];

-/**

-* Global function for chmodding directories and files for internal use

-*

-* This function determines owner and group whom the file belongs to and user and group of PHP and then set safest possible file permissions.

-* The function determines owner and group from common.php file and sets the same to the provided file.

-* The function uses bit fields to build the permissions.

-* The function sets the appropiate execute bit on directories.

-*

-* Supported constants representing bit fields are:

-*

-* CHMOD_ALL - all permissions (7)

-* CHMOD_READ - read permission (4)

-* CHMOD_WRITE - write permission (2)

-* CHMOD_EXECUTE - execute permission (1)

-*

-* NOTE: The function uses POSIX extension and fileowner()/filegroup() functions. If any of them is disabled, this function tries to build proper permissions, by calling is_readable() and is_writable() functions.

-*

-* @param string $filename The file/directory to be chmodded

-* @param int $perms Permissions to set

-*

-* @return bool true on success, otherwise false

-*/

-function phpbb_chmod($filename, $perms = CHMOD_READ)

-{

- static $_chmod_info;

-

- // Return if the file no longer exists.

- if (!file_exists($filename))

- {

- return false;

- }

-

- // Determine some common vars

- if (empty($_chmod_info))

- {

- if (!function_exists('fileowner') || !function_exists('filegroup'))

- {

- // No need to further determine owner/group - it is unknown

- $_chmod_info['process'] = false;

- }

- else

- {

- global $phpbb_root_path, $phpEx;

-

- // Determine owner/group of common.php file and the filename we want to change here

- $common_php_owner = @fileowner($phpbb_root_path . 'common.' . $phpEx);

- $common_php_group = @filegroup($phpbb_root_path . 'common.' . $phpEx);

-

- // And the owner and the groups PHP is running under.

- $php_uid = (function_exists('posix_getuid')) ? @posix_getuid() : false;

- $php_gids = (function_exists('posix_getgroups')) ? @posix_getgroups() : false;

-

- // If we are unable to get owner/group, then do not try to set them by guessing

- if (!$php_uid || empty($php_gids) || !$common_php_owner || !$common_php_group)

- {

- $_chmod_info['process'] = false;

- }

- else

- {

- $_chmod_info = array(

- 'process' => true,

- 'common_owner' => $common_php_owner,

- 'common_group' => $common_php_group,

- 'php_uid' => $php_uid,

- 'php_gids' => $php_gids,

- );

- }

- }

- }

-

- if ($_chmod_info['process'])

- {

- $file_uid = @fileowner($filename);

- $file_gid = @filegroup($filename);

-

- // Change owner

- if (@chown($filename, $_chmod_info['common_owner']))

- {

- clearstatcache();

- $file_uid = @fileowner($filename);

- }

-

- // Change group

- if (@chgrp($filename, $_chmod_info['common_group']))

- {

- clearstatcache();

- $file_gid = @filegroup($filename);

- }

-

- // If the file_uid/gid now match the one from common.php we can process further, else we are not able to change something

- if ($file_uid != $_chmod_info['common_owner'] || $file_gid != $_chmod_info['common_group'])

- {

- $_chmod_info['process'] = false;

- }

- }

-

- // Still able to process?

- if ($_chmod_info['process'])

- {

- if ($file_uid == $_chmod_info['php_uid'])

- {

- $php = 'owner';

- }

- else if (in_array($file_gid, $_chmod_info['php_gids']))

- {

- $php = 'group';

- }

- else

- {

- // Since we are setting the everyone bit anyway, no need to do expensive operations

- $_chmod_info['process'] = false;

- }

- }

-

- // We are not able to determine or change something

- if (!$_chmod_info['process'])

- {

- $php = 'other';

- }

-

- // Owner always has read/write permission

- $owner = CHMOD_READ | CHMOD_WRITE;

- if (is_dir($filename))

- {

- $owner |= CHMOD_EXECUTE;

-

- // Only add execute bit to the permission if the dir needs to be readable

- if ($perms & CHMOD_READ)

- {

- $perms |= CHMOD_EXECUTE;

- }

- }

-

- switch ($php)

- {

- case 'owner':

- $result = @chmod($filename, ($owner << 6) + (0 << 3) + (0 << 0));

-

- clearstatcache();

-

- if (is_readable($filename) && phpbb_is_writable($filename))

- {

- break;

- }

-

- case 'group':

- $result = @chmod($filename, ($owner << 6) + ($perms << 3) + (0 << 0));

-

- clearstatcache();

-

- if ((!($perms & CHMOD_READ) || is_readable($filename)) && (!($perms & CHMOD_WRITE) || phpbb_is_writable($filename)))

- {

- break;

- }

-

- case 'other':

- $result = @chmod($filename, ($owner << 6) + ($perms << 3) + ($perms << 0));

-

- clearstatcache();

-

- if ((!($perms & CHMOD_READ) || is_readable($filename)) && (!($perms & CHMOD_WRITE) || phpbb_is_writable($filename)))

- {

- break;

- }

-

- default:

- return false;

- break;

- }

-

- return $result;

-}

-

-/**

-* Test if a file/directory is writable

-*

-* This function calls the native is_writable() when not running under

-* Windows and it is not disabled.

-*

-* @param string $file Path to perform write test on

-* @return bool True when the path is writable, otherwise false.

-*/

-function phpbb_is_writable($file)

-{

- if (strtolower(substr(PHP_OS, 0, 3)) === 'win' || !function_exists('is_writable'))

- {

- if (file_exists($file))

- {

- // Canonicalise path to absolute path

- $file = phpbb_realpath($file);

-

- if (is_dir($file))

- {

- // Test directory by creating a file inside the directory

- $result = @tempnam($file, 'i_w');

-

- if (is_string($result) && file_exists($result))

- {

- unlink($result);

-

- // Ensure the file is actually in the directory (returned realpathed)

- return (strpos($result, $file) === 0) ? true : false;

- }

- }

- else

- {

- $handle = @fopen($file, 'r+');

-

- if (is_resource($handle))

- {

- fclose($handle);

- return true;

- }

- }

- }

- else

- {

- // file does not exist test if we can write to the directory

- $dir = dirname($file);

-

- if (file_exists($dir) && is_dir($dir) && phpbb_is_writable($dir))

- {

- return true;

- }

- }

-

- return false;

- }

- else

- {

- return is_writable($file);

- }

-}

-

-/**

-* Checks if a path ($path) is absolute or relative

-*

-* @param string $path Path to check absoluteness of

-* @return boolean

-*/

-function phpbb_is_absolute($path)

-{

- return (isset($path[0]) && $path[0] == '/' || preg_match('#^[a-z]:[/\\\]#i', $path)) ? true : false;

-}

-

-/**

-* @author Chris Smith <chris@project-minerva.org>

-* @copyright 2006 Project Minerva Team

-* @param string $path The path which we should attempt to resolve.

-* @return mixed

-*/

-function phpbb_own_realpath($path)

-{

- global $request;

-

- // Now to perform funky shizzle

-

- // Switch to use UNIX slashes

- $path = str_replace(DIRECTORY_SEPARATOR, '/', $path);

- $path_prefix = '';

-

- // Determine what sort of path we have

- if (phpbb_is_absolute($path))

- {

- $absolute = true;

-

- if ($path[0] == '/')

- {

- // Absolute path, *NIX style

- $path_prefix = '';

- }

- else

- {

- // Absolute path, Windows style

- // Remove the drive letter and colon

- $path_prefix = $path[0] . ':';

- $path = substr($path, 2);

- }

- }

- else

- {

- // Relative Path

- // Prepend the current working directory

- if (function_exists('getcwd'))

- {

- // This is the best method, hopefully it is enabled!

- $path = str_replace(DIRECTORY_SEPARATOR, '/', getcwd()) . '/' . $path;

- $absolute = true;

- if (preg_match('#^[a-z]:#i', $path))

- {

- $path_prefix = $path[0] . ':';

- $path = substr($path, 2);

- }

- else

- {

- $path_prefix = '';

- }

- }

- else if ($request->server('SCRIPT_FILENAME'))

- {

- // Warning: If chdir() has been used this will lie!

- // Warning: This has some problems sometime (CLI can create them easily)

- $filename = htmlspecialchars_decode($request->server('SCRIPT_FILENAME'));

- $path = str_replace(DIRECTORY_SEPARATOR, '/', dirname($filename)) . '/' . $path;

- $absolute = true;

- $path_prefix = '';

- }

- else

- {

- // We have no way of getting the absolute path, just run on using relative ones.

- $absolute = false;

- $path_prefix = '.';

- }

- }

-

- // Remove any repeated slashes

- $path = preg_replace('#/{2,}#', '/', $path);

-

- // Remove the slashes from the start and end of the path

- $path = trim($path, '/');

-

- // Break the string into little bits for us to nibble on

- $bits = explode('/', $path);

-

- // Remove any . in the path, renumber array for the loop below

- $bits = array_values(array_diff($bits, array('.')));

-

- // Lets get looping, run over and resolve any .. (up directory)

- for ($i = 0, $max = sizeof($bits); $i < $max; $i++)

- {

- // @todo Optimise

- if ($bits[$i] == '..' )

- {

- if (isset($bits[$i - 1]))

- {

- if ($bits[$i - 1] != '..')

- {

- // We found a .. and we are able to traverse upwards, lets do it!

- unset($bits[$i]);

- unset($bits[$i - 1]);

- $i -= 2;

- $max -= 2;

- $bits = array_values($bits);

- }

- }

- else if ($absolute) // ie. !isset($bits[$i - 1]) && $absolute

- {

- // We have an absolute path trying to descend above the root of the filesystem

- // ... Error!

- return false;

- }

- }

- }

-

- // Prepend the path prefix

- array_unshift($bits, $path_prefix);

-

- $resolved = '';

-

- $max = sizeof($bits) - 1;

-

- // Check if we are able to resolve symlinks, Windows cannot.

- $symlink_resolve = (function_exists('readlink')) ? true : false;

-

- foreach ($bits as $i => $bit)

- {

- if (@is_dir("$resolved/$bit") || ($i == $max && @is_file("$resolved/$bit")))

- {

- // Path Exists

- if ($symlink_resolve && is_link("$resolved/$bit") && ($link = readlink("$resolved/$bit")))

- {

- // Resolved a symlink.

- $resolved = $link . (($i == $max) ? '' : '/');

- continue;

- }

- }

- else

- {

- // Something doesn't exist here!

- // This is correct realpath() behaviour but sadly open_basedir and safe_mode make this problematic

- // return false;

- }

- $resolved .= $bit . (($i == $max) ? '' : '/');

- }

-

- // @todo If the file exists fine and open_basedir only has one path we should be able to prepend it

- // because we must be inside that basedir, the question is where...

- // @internal The slash in is_dir() gets around an open_basedir restriction

- if (!@file_exists($resolved) || (!@is_dir($resolved . '/') && !is_file($resolved)))

- {

- return false;

- }

-

- // Put the slashes back to the native operating systems slashes

- $resolved = str_replace('/', DIRECTORY_SEPARATOR, $resolved);

-

- // Check for DIRECTORY_SEPARATOR at the end (and remove it!)

- if (substr($resolved, -1) == DIRECTORY_SEPARATOR)

- {

- return substr($resolved, 0, -1);

- }

-

- return $resolved; // We got here, in the end!

-}

-

-if (!function_exists('realpath'))

-{

- /**

- * A wrapper for realpath

- * @ignore

- */

- function phpbb_realpath($path)

- {

- return phpbb_own_realpath($path);

- }

-}

-else

-{

- /**

- * A wrapper for realpath

- */

- function phpbb_realpath($path)

- {

- $realpath = realpath($path);

-

- // Strangely there are provider not disabling realpath but returning strange values. :o

- // We at least try to cope with them.

- if ($realpath === $path || $realpath === false)

- {

- return phpbb_own_realpath($path);

- }

-

- // Check for DIRECTORY_SEPARATOR at the end (and remove it!)

- if (substr($realpath, -1) == DIRECTORY_SEPARATOR)

- {

- $realpath = substr($realpath, 0, -1);

- }

-

- return $realpath;

- }

-}

-

-

- $phpbb_notifications->mark_notifications_read(array(

- $phpbb_notifications->mark_notifications_read_by_parent(array(

- $phpbb_notifications->mark_notifications_read_by_parent(array(

- $phpbb_notifications->mark_notifications_read(array(

- $phpbb_notifications->mark_notifications_read_by_parent(array(

- $tracking['t'][$topic_id36] = base_convert($post_time - $config['board_startdate'], 10, 36);

- global $config, $user;

- global $config, $db, $user;

- $tracking_topics = request_var($config['cookie_name'] . '_track', '', false, true);

- global $db, $tracking_topics, $user, $config, $auth, $request, $phpbb_container;

- $row = false;

-

- global $db, $cache, $config, $user, $phpbb_root_path, $phpbb_filesystem, $phpbb_path_helper, $phpEx, $phpbb_dispatcher;

-

- $failover_flag = false;

- if (empty($user->lang))

- // Malformed url, redirect to current page...

- $url = generate_board_url() . '/' . $user->page['page'];

- $user_id = request_var('confirm_uid', 0);

- $session_id = request_var('sess', '');

- $confirm_key = request_var('confirm_key', '');

- if (request_var('confirm_key', ''))

- global $db, $user, $template, $auth, $phpEx, $phpbb_root_path, $config;

- global $request, $phpbb_container, $phpbb_dispatcher;

- if (empty($user->lang))

- add_log('admin', 'LOG_ADMIN_AUTH_FAIL');

- $credential = request_var('credential', '');

- add_log('admin', 'LOG_ADMIN_AUTH_FAIL');

- $username = request_var('username', '', true);

- add_log('admin', 'LOG_ADMIN_AUTH_FAIL');

- add_log('admin', 'LOG_ADMIN_AUTH_SUCCESS');

- add_log('admin', 'LOG_ADMIN_AUTH_FAIL');

- $redirect = request_var('redirect', "{$phpbb_root_path}index.$phpEx");

-* Add log entry

-*

-* @param string $mode The mode defines which log_type is used and from which log the entry is retrieved

-* @param int $forum_id Mode 'mod' ONLY: forum id of the related item, NOT INCLUDED otherwise

-* @param int $topic_id Mode 'mod' ONLY: topic id of the related item, NOT INCLUDED otherwise

-* @param int $reportee_id Mode 'user' ONLY: user id of the reportee, NOT INCLUDED otherwise

-* @param string $log_operation Name of the operation

-* @param array $additional_data More arguments can be added, depending on the log_type

-*

-* @return int|bool Returns the log_id, if the entry was added to the database, false otherwise.

-*

-* @deprecated Use $phpbb_log->add() instead

-*/

-function add_log()

-{

- global $phpbb_log, $user;

-

- $args = func_get_args();

- $mode = array_shift($args);

-

- // This looks kind of dirty, but add_log has some additional data before the log_operation

- $additional_data = array();

- switch ($mode)

- {

- case 'admin':

- case 'critical':

- break;

- case 'mod':

- $additional_data['forum_id'] = array_shift($args);

- $additional_data['topic_id'] = array_shift($args);

- break;

- case 'user':

- $additional_data['reportee_id'] = array_shift($args);

- break;

- }

-

- $log_operation = array_shift($args);

- $additional_data = array_merge($additional_data, $args);

-

- $user_id = (empty($user->data)) ? ANONYMOUS : $user->data['user_id'];

- $user_ip = (empty($user->ip)) ? '' : $user->ip;

-

- return $phpbb_log->add($mode, $user_id, $user_ip, $log_operation, time(), $additional_data);

-}

-

-/**

-* @param bool $use_unicode whether or not to take advantage of PCRE supporting unicode

-function get_censor_preg_expression($word, $use_unicode = true)

- if ($use_unicode && phpbb_pcre_utf8_support())

- {

- // Replace asterisk(s) inside the pattern, at the start and at the end of it with regexes

- $word = preg_replace(array('#(?<=[\p{Nd}\p{L}_])\*+(?=[\p{Nd}\p{L}_])#iu', '#^\*+#', '#\*+$#'), array('([\x20]*?|[\p{Nd}\p{L}_-]*?)', '[\p{Nd}\p{L}_-]*?', '[\p{Nd}\p{L}_-]*?'), $word);

-

- // Generate the final substitution

- $preg_expr = '#(?<![\p{Nd}\p{L}_-])(' . $word . ')(?![\p{Nd}\p{L}_-])#iu';

- }

- else

- {

- // Replace the asterisk inside the pattern, at the start and at the end of it with regexes

- $word = preg_replace(array('#(?<=\S)\*+(?=\S)#iu', '#^\*+#', '#\*+$#'), array('(\x20*?\S*?)', '\S*?', '\S*?'), $word);

- // Generate the final substitution

- $preg_expr = '#(?<!\S)(' . $word . ')(?!\S)#iu';

- }

- // checkdnsrr() is available on Windows since PHP 5.3,

- // but until 5.3.3 it only works for MX records

- // See: http://bugs.php.net/bug.php?id=51844

-

- // Call checkdnsrr() if

- // we're looking for an MX record or

- // we're not on Windows or

- // we're running a PHP version where #51844 has been fixed

-

- // checkdnsrr() supports AAAA since 5.0.0

- // checkdnsrr() supports TXT since 5.2.4

- if (

- ($type == 'MX' || DIRECTORY_SEPARATOR != '\\' || version_compare(PHP_VERSION, '5.3.3', '>=')) &&

- ($type != 'AAAA' || version_compare(PHP_VERSION, '5.0.0', '>=')) &&

- ($type != 'TXT' || version_compare(PHP_VERSION, '5.2.4', '>=')) &&

- function_exists('checkdnsrr')

- )

- // dns_get_record() is available since PHP 5; since PHP 5.3 also on Windows,

- // but on Windows it does not work reliable for AAAA records before PHP 5.3.1

-

- // Call dns_get_record() if

- // we're not looking for an AAAA record or

- // we're not on Windows or

- // we're running a PHP version where AAAA lookups work reliable

- if (

- ($type != 'AAAA' || DIRECTORY_SEPARATOR != '\\' || version_compare(PHP_VERSION, '5.3.1', '>=')) &&

- function_exists('dns_get_record')

- )

- global $phpEx, $phpbb_root_path, $msg_title, $msg_long_text;

- if (!defined('E_DEPRECATED'))

- {

- define('E_DEPRECATED', 8192);

- }

-

- add_log('critical', 'LOG_IMAGE_GENERATION_ERROR', $errfile, $errline, $msg_text);

- if (!empty($user) && !empty($user->lang))

- add_log('critical', 'LOG_GENERAL_ERROR', $msg_title, $log_text);

- if (empty($user->lang))

- $root_path = phpbb_realpath(dirname(__FILE__) . '/../');

- if ($db->get_sql_layer() === 'sqlite' || $db->get_sql_layer() === 'sqlite3')

- global $db, $config, $user;

- $guests_online = $hidden_online = $l_online_users = $online_userlist = $visible_online = '';

-* Determine which plural form we should use.

-* For some languages this is not as simple as for English.

-*

-* @param $rule int ID of the plural rule we want to use, see http://wiki.phpbb.com/Plural_Rules#Plural_Rules

-* @param $number int|float The number we want to get the plural case for. Float numbers are floored.

-* @return int The plural-case we need to use for the number plural-rule combination

-*/

-function phpbb_get_plural_form($rule, $number)

-{

- $number = (int) $number;

-

- if ($rule > 15 || $rule < 0)

- {

- trigger_error('INVALID_PLURAL_RULE');

- }

-

- /**

- * The following plural rules are based on a list published by the Mozilla Developer Network

- * https://developer.mozilla.org/en/Localization_and_Plurals

- */

- switch ($rule)

- {

- case 0:

- /**

- * Families: Asian (Chinese, Japanese, Korean, Vietnamese), Persian, Turkic/Altaic (Turkish), Thai, Lao

- * 1 - everything: 0, 1, 2, ...

- */

- return 1;

-

- case 1:

- /**

- * Families: Germanic (Danish, Dutch, English, Faroese, Frisian, German, Norwegian, Swedish), Finno-Ugric (Estonian, Finnish, Hungarian), Language isolate (Basque), Latin/Greek (Greek), Semitic (Hebrew), Romanic (Italian, Portuguese, Spanish, Catalan)

- * 1 - 1

- * 2 - everything else: 0, 2, 3, ...

- */

- return ($number == 1) ? 1 : 2;

-

- case 2:

- /**

- * Families: Romanic (French, Brazilian Portuguese)

- * 1 - 0, 1

- * 2 - everything else: 2, 3, ...

- */

- return (($number == 0) || ($number == 1)) ? 1 : 2;

-

- case 3:

- /**

- * Families: Baltic (Latvian)

- * 1 - 0

- * 2 - ends in 1, not 11: 1, 21, ... 101, 121, ...

- * 3 - everything else: 2, 3, ... 10, 11, 12, ... 20, 22, ...

- */

- return ($number == 0) ? 1 : ((($number % 10 == 1) && ($number % 100 != 11)) ? 2 : 3);

-

- case 4:

- /**

- * Families: Celtic (Scottish Gaelic)

- * 1 - is 1 or 11: 1, 11

- * 2 - is 2 or 12: 2, 12

- * 3 - others between 3 and 19: 3, 4, ... 10, 13, ... 18, 19

- * 4 - everything else: 0, 20, 21, ...

- */

- return ($number == 1 || $number == 11) ? 1 : (($number == 2 || $number == 12) ? 2 : (($number >= 3 && $number <= 19) ? 3 : 4));

-

- case 5:

- /**

- * Families: Romanic (Romanian)

- * 1 - 1

- * 2 - is 0 or ends in 01-19: 0, 2, 3, ... 19, 101, 102, ... 119, 201, ...

- * 3 - everything else: 20, 21, ...

- */

- return ($number == 1) ? 1 : ((($number == 0) || (($number % 100 > 0) && ($number % 100 < 20))) ? 2 : 3);

-

- case 6:

- /**

- * Families: Baltic (Lithuanian)

- * 1 - ends in 1, not 11: 1, 21, 31, ... 101, 121, ...

- * 2 - ends in 0 or ends in 10-20: 0, 10, 11, 12, ... 19, 20, 30, 40, ...

- * 3 - everything else: 2, 3, ... 8, 9, 22, 23, ... 29, 32, 33, ...

- */

- return (($number % 10 == 1) && ($number % 100 != 11)) ? 1 : ((($number % 10 < 2) || (($number % 100 >= 10) && ($number % 100 < 20))) ? 2 : 3);

-

- case 7:

- /**

- * Families: Slavic (Croatian, Serbian, Russian, Ukrainian)

- * 1 - ends in 1, not 11: 1, 21, 31, ... 101, 121, ...

- * 2 - ends in 2-4, not 12-14: 2, 3, 4, 22, 23, 24, 32, ...

- * 3 - everything else: 0, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 25, 26, ...

- */

- return (($number % 10 == 1) && ($number % 100 != 11)) ? 1 : ((($number % 10 >= 2) && ($number % 10 <= 4) && (($number % 100 < 10) || ($number % 100 >= 20))) ? 2 : 3);

-

- case 8:

- /**

- * Families: Slavic (Slovak, Czech)

- * 1 - 1

- * 2 - 2, 3, 4

- * 3 - everything else: 0, 5, 6, 7, ...

- */

- return ($number == 1) ? 1 : ((($number >= 2) && ($number <= 4)) ? 2 : 3);

-

- case 9:

- /**

- * Families: Slavic (Polish)

- * 1 - 1

- * 2 - ends in 2-4, not 12-14: 2, 3, 4, 22, 23, 24, 32, ... 104, 122, ...

- * 3 - everything else: 0, 5, 6, ... 11, 12, 13, 14, 15, ... 20, 21, 25, ...

- */

- return ($number == 1) ? 1 : ((($number % 10 >= 2) && ($number % 10 <= 4) && (($number % 100 < 12) || ($number % 100 > 14))) ? 2 : 3);

-

- case 10:

- /**

- * Families: Slavic (Slovenian, Sorbian)

- * 1 - ends in 01: 1, 101, 201, ...

- * 2 - ends in 02: 2, 102, 202, ...

- * 3 - ends in 03-04: 3, 4, 103, 104, 203, 204, ...

- * 4 - everything else: 0, 5, 6, 7, 8, 9, 10, 11, ...

- */

- return ($number % 100 == 1) ? 1 : (($number % 100 == 2) ? 2 : ((($number % 100 == 3) || ($number % 100 == 4)) ? 3 : 4));

-

- case 11:

- /**

- * Families: Celtic (Irish Gaeilge)

- * 1 - 1

- * 2 - 2

- * 3 - is 3-6: 3, 4, 5, 6

- * 4 - is 7-10: 7, 8, 9, 10

- * 5 - everything else: 0, 11, 12, ...

- */

- return ($number == 1) ? 1 : (($number == 2) ? 2 : (($number >= 3 && $number <= 6) ? 3 : (($number >= 7 && $number <= 10) ? 4 : 5)));

-

- case 12:

- /**

- * Families: Semitic (Arabic)

- * 1 - 1

- * 2 - 2

- * 3 - ends in 03-10: 3, 4, ... 10, 103, 104, ... 110, 203, 204, ...

- * 4 - ends in 11-99: 11, ... 99, 111, 112, ...

- * 5 - everything else: 100, 101, 102, 200, 201, 202, ...

- * 6 - 0

- */

- return ($number == 1) ? 1 : (($number == 2) ? 2 : ((($number % 100 >= 3) && ($number % 100 <= 10)) ? 3 : ((($number % 100 >= 11) && ($number % 100 <= 99)) ? 4 : (($number != 0) ? 5 : 6))));

-

- case 13:

- /**

- * Families: Semitic (Maltese)

- * 1 - 1

- * 2 - is 0 or ends in 01-10: 0, 2, 3, ... 9, 10, 101, 102, ...

- * 3 - ends in 11-19: 11, 12, ... 18, 19, 111, 112, ...

- * 4 - everything else: 20, 21, ...

- */

- return ($number == 1) ? 1 : ((($number == 0) || (($number % 100 > 1) && ($number % 100 < 11))) ? 2 : ((($number % 100 > 10) && ($number % 100 < 20)) ? 3 : 4));

-

- case 14:

- /**

- * Families: Slavic (Macedonian)

- * 1 - ends in 1: 1, 11, 21, ...

- * 2 - ends in 2: 2, 12, 22, ...

- * 3 - everything else: 0, 3, 4, ... 10, 13, 14, ... 20, 23, ...

- */

- return ($number % 10 == 1) ? 1 : (($number % 10 == 2) ? 2 : 3);

-

- case 15:

- /**

- * Families: Icelandic

- * 1 - ends in 1, not 11: 1, 21, 31, ... 101, 121, 131, ...

- * 2 - everything else: 0, 2, 3, ... 10, 11, 12, ... 20, 22, ...

- */

- return (($number % 10 == 1) && ($number % 100 != 11)) ? 1 : 2;

- }

-}

-

-/**

- global $user, $config, $cache, $phpbb_root_path, $phpEx;

- global $request;

- set_config('record_online_users', $total_online_users, true);

- set_config('record_online_date', time(), true);

- $forum_id = request_var('f', 0);

- $topic_id = request_var('t', 0);

- if ($config['load_notifications'] && $user->data['user_id'] != ANONYMOUS && $user->data['user_type'] != USER_IGNORE)

- $notifications = $phpbb_notifications->load_notifications(array(

- 'S_NOTIFICATIONS_DISPLAY' => $config['load_notifications'],

- 'U_FAQ' => append_sid("{$phpbb_root_path}faq.$phpEx"),

- 'U_FEED' => generate_board_url() . "/feed.$phpEx",

- 'T_STYLESHEET_LANG_LINK' => "{$web_path}styles/" . rawurlencode($user->style['style_path']) . '/theme/' . $user->lang_name . '/stylesheet.css?assets_version=' . $config['assets_version'],

- $debug_info[] = sprintf('<abbr title="SQL time: %.3fs / PHP time: %.3fs">Time: %.3fs</abbr>', $db->get_sql_time(), ($totaltime - $db->get_sql_time()), $totaltime);

- $debug_info[] = sprintf('<abbr title="Cached: %d">Queries: %d</abbr>', $db->sql_num_queries(true), $db->sql_num_queries());

- global $db, $config, $template, $user, $auth, $cache, $starttime, $phpbb_root_path, $phpEx;

- global $phpbb_hook, $config;

-* Check if PCRE has UTF-8 support

-* PHP may not be linked with the bundled PCRE lib and instead with an older version

-*

-* @return bool Returns true if PCRE (the regular expressions library) supports UTF-8 encoding

-*/

-function phpbb_pcre_utf8_support()

-{

- static $utf8_pcre_properties = null;

- if (is_null($utf8_pcre_properties))

- {

- $utf8_pcre_properties = (@preg_match('/\p{L}/u', 'a') !== false);

- }

- return $utf8_pcre_properties;

-}

-

-/**