If you are using a UEFI system instead of BIOS, the user interface is slightly different as you cannot choose the boot loader (first drop down list) since only one is available.
This tool[48] allows you to configure the boot options (choice of the bootloader, set a password, the default boot, etc.)
It is found under the Boot tab in the Mageia Control Center labeled "Set up boot system".
Avís
No utilitzeu aquesta eina si no sabeu exactament el que esteu fent. La modificació d'alguns ajusts poden evitar que el vostre equip s'iniciï de nou!
In the first part, called Bootloader, it is possible if using BIOS, to choose which , Grub, Grub2 or Lilo, and with a graphical or a text menu. It is just a question of taste, there are no other consequences. You can also set the , don't change anything here unless you are an expert. The boot device is where the bootloader is installed and any modification can prevent your machine from booting.
In UEFI system, the bootloader is Grub2-efi and is installed in /boot/EFI partition. This FAT32 formatted partition is common to all operating systems installed.
In the second part, called Main options, you can set the , in seconds. During this delay, Grub or Lilo will display the list of available operating systems, prompting you to make your choice. If no selection is made, the bootloader will boot the default one once the delay elapses.
En la tercera i última part , anomenada , és possible establir una contrasenya.
El botó dóna algunes opcions addicionals.
ACPI (Advanced Configuration and Power Interface) és un estàndard per la gestió de l'energia. Es pot estalviar energia parant dispositius no utilitzats, aquest va ser el mètode abans de APM. Marqueu aquesta casella si el vostre maquinari funciona amb ACPI.
SMP stands for Symmetric Multi Processors, it's an architecture for multicore processors.
Nota
Si teniu un processador amb HyperThreading, Mageia ho veurà com un processador dual i habilitarà SMP.
and
APIC stands for Advanced Programmable Interrupt Controller. There are two components in the Intel APIC system, the local APIC (LAPIC) and the I/O APIC. The latter one routes the interrupts it receives from peripheral buses to one or more local APICs that are in the processor. It is really useful for multi-processor systems. Some computers have problems with the APIC system which can cause freezes or incorrect device detection (error message "spurious 8259A interrupt: IRQ7"). In this case, disable APIC and/or Local APIC.
The screen differs depending on whether you have an BIOS or UEFI system.
You have a BIOS system:
In this case, you can see the list of all the available entries at boot time. The default one is asterisked. To change the order of the menu entries, click on the up or down arrows to move the selected item. If you click on the or buttons, a new window appears to add a new entry in the bootloader menu or to modify an existing one. You need to be familiar with Lilo or Grub to be able to use these tools.
L'etiqueta és de forma lliure, escriviu aquí el que vulgueu que es mostri al menú. Coincideix amb l'ordre "title" del Grub. Per exemple: Mageia3.
La Imatge conté el nom del nucli. Coincideix amb l'ordre de Grub "kernel". Per exemple /boot/vmlinuz.
El Root conté el nom del dispositiu en el qual s'emmagatzemaran els nuclis. Coincideix amb l'ordre de Grub "root". Per exemple (hd0,1).
El camp Annexar conté les opcions que han de donar-se al nucli en l'arrencada.
Si la casella Defecte està marcada, Grub arrencarà aquesta entrada per defecte.
In the extra screen called Advanced, it is possible to choose the Video mode, an initrd file and a network profile, see “Administra diferents perfils de xarxa”, in the drop-down lists.
You have a UEFI system:
In this case, the drop-down list displays all the available entries; click on the one wanted as the default one.
El camp Annexar conté les opcions que han de donar-se al nucli en l'arrencada.
In the extra screen called Advanced, it is possible to choose the Video mode.
To set many other parameters, you can use Grub Customizer, available in the Mageia repositories (see below).
