From 2d18db751a6705f05fcb98ec12efe8401ede7cf1 Mon Sep 17 00:00:00 2001 From: Papoteur Date: Thu, 11 Mar 2021 19:04:49 +0100 Subject: Adding or refreshing netinstall in nl --- netinstall/8/nl/content/ar01s01.html | 59 +++ netinstall/8/nl/content/ar01s02.html | 78 +++ netinstall/8/nl/content/draft.png | Bin 0 -> 16150 bytes netinstall/8/nl/content/images/dx-help.png | Bin 0 -> 11451 bytes .../content/images/dx2-add_supplemental_media.png | Bin 0 -> 40258 bytes .../8/nl/content/images/dx2-chooseDesktop.png | Bin 0 -> 47820 bytes .../8/nl/content/images/dx2-chooseMountpoints.png | Bin 0 -> 38353 bytes .../nl/content/images/dx2-choosePackageGroups.png | Bin 0 -> 57061 bytes .../8/nl/content/images/dx2-choosePackagesTree.png | Bin 0 -> 52917 bytes .../8/nl/content/images/dx2-configureServices.png | Bin 0 -> 42939 bytes .../nl/content/images/dx2-configureTimezoneUTC.png | Bin 0 -> 39025 bytes .../nl/content/images/dx2-configureX_card_list.png | Bin 0 -> 43946 bytes .../8/nl/content/images/dx2-configureX_chooser.png | Bin 0 -> 37463 bytes .../8/nl/content/images/dx2-configureX_monitor.png | Bin 0 -> 42478 bytes netinstall/8/nl/content/images/dx2-diskdrake.png | Bin 0 -> 51919 bytes .../8/nl/content/images/dx2-doPartitionDisks.png | Bin 0 -> 110935 bytes netinstall/8/nl/content/images/dx2-exitInstall.png | Bin 0 -> 41061 bytes .../8/nl/content/images/dx2-formatPartitions.png | Bin 0 -> 35962 bytes .../8/nl/content/images/dx2-installUpdates.png | Bin 0 -> 40240 bytes netinstall/8/nl/content/images/dx2-license.png | Bin 0 -> 55401 bytes .../8/nl/content/images/dx2-media_selection.png | Bin 0 -> 38050 bytes .../8/nl/content/images/dx2-minimal-install.png | Bin 0 -> 36379 bytes .../8/nl/content/images/dx2-securityLevel.png | Bin 0 -> 45750 bytes .../8/nl/content/images/dx2-selectCountry.png | Bin 0 -> 35459 bytes .../8/nl/content/images/dx2-selectInstallClass.png | Bin 0 -> 35321 bytes .../8/nl/content/images/dx2-selectKeyboard.png | Bin 0 -> 41517 bytes .../8/nl/content/images/dx2-selectLanguage.png | Bin 0 -> 43908 bytes netinstall/8/nl/content/images/dx2-selectMouse.png | Bin 0 -> 36864 bytes .../8/nl/content/images/dx2-setRootPassword.png | Bin 0 -> 42892 bytes .../8/nl/content/images/dx2-setupBootloader.png | Bin 0 -> 45213 bytes netinstall/8/nl/content/images/dx2-setupSCSI.png | Bin 0 -> 150731 bytes netinstall/8/nl/content/images/dx2-soundConfig.png | Bin 0 -> 41629 bytes .../8/nl/content/images/dx2-summaryBottom.png | Bin 0 -> 53196 bytes .../8/nl/content/images/dx2-takeOverHdConfirm.png | Bin 0 -> 34301 bytes netinstall/8/nl/content/images/net-welcome2.png | Bin 0 -> 189362 bytes netinstall/8/nl/content/images/netInstall-01.png | Bin 0 -> 1061 bytes netinstall/8/nl/content/images/netInstall-02.png | Bin 0 -> 21870 bytes netinstall/8/nl/content/images/netInstall-03.png | Bin 0 -> 1214 bytes netinstall/8/nl/content/images/netInstall-04.png | Bin 0 -> 3200 bytes netinstall/8/nl/content/images/netInstall-05.png | Bin 0 -> 3329 bytes netinstall/8/nl/content/images/netInstall-06.png | Bin 0 -> 18781 bytes netinstall/8/nl/content/images/netInstall-07.png | Bin 0 -> 19091 bytes netinstall/8/nl/content/images/netInstall-08.png | Bin 0 -> 3210 bytes netinstall/8/nl/content/images/netInstall-09.png | Bin 0 -> 2661 bytes netinstall/8/nl/content/images/netInstall-10.png | Bin 0 -> 2331 bytes netinstall/8/nl/content/images/netInstall-11.png | Bin 0 -> 4596 bytes netinstall/8/nl/content/images/netInstall-12.png | Bin 0 -> 3359 bytes netinstall/8/nl/content/images/netInstall-13.png | Bin 0 -> 2485 bytes netinstall/8/nl/content/images/netInstall-14.png | Bin 0 -> 5263 bytes netinstall/8/nl/content/images/netInstall-15.png | Bin 0 -> 3998 bytes netinstall/8/nl/content/images/netInstall-16.png | Bin 0 -> 4182 bytes netinstall/8/nl/content/images/netInstall-17.png | Bin 0 -> 5182 bytes netinstall/8/nl/content/index.html | 39 ++ netinstall/8/nl/content/main.js | 179 +++++++ netinstall/8/nl/content/netStageTwo.html | 446 ++++++++++++++++++ netinstall/8/nl/content/nwSearchFnt.js | 524 +++++++++++++++++++++ netinstall/8/nl/content/search/default.props | 1 + netinstall/8/nl/content/search/en-us.props | 45 ++ netinstall/8/nl/content/search/es-es.props | 179 +++++++ netinstall/8/nl/content/search/htmlFileInfoList.js | 4 + netinstall/8/nl/content/search/htmlFileList.js | 5 + netinstall/8/nl/content/search/index-1.js | 516 ++++++++++++++++++++ netinstall/8/nl/content/search/index-2.js | 515 ++++++++++++++++++++ netinstall/8/nl/content/search/index-3.js | 511 ++++++++++++++++++++ netinstall/8/nl/content/search/ja-jp.props | 1 + netinstall/8/nl/content/search/nwSearchFnt.js | 513 ++++++++++++++++++++ netinstall/8/nl/content/search/punctuation.props | 31 ++ .../8/nl/content/search/stemmers/de_stemmer.js | 247 ++++++++++ .../8/nl/content/search/stemmers/en_stemmer.js | 187 ++++++++ .../8/nl/content/search/stemmers/fr_stemmer.js | 299 ++++++++++++ netinstall/8/nl/content/webhelp-custom.css | 229 +++++++++ netinstall/8/nl/content/webhelp-default.css | 92 ++++ netinstall/8/nl/index.html | 15 + 73 files changed, 4715 insertions(+) create mode 100644 netinstall/8/nl/content/ar01s01.html create mode 100644 netinstall/8/nl/content/ar01s02.html create mode 100644 netinstall/8/nl/content/draft.png create mode 100644 netinstall/8/nl/content/images/dx-help.png create mode 100644 netinstall/8/nl/content/images/dx2-add_supplemental_media.png create mode 100644 netinstall/8/nl/content/images/dx2-chooseDesktop.png create mode 100644 netinstall/8/nl/content/images/dx2-chooseMountpoints.png create mode 100644 netinstall/8/nl/content/images/dx2-choosePackageGroups.png create mode 100644 netinstall/8/nl/content/images/dx2-choosePackagesTree.png create mode 100644 netinstall/8/nl/content/images/dx2-configureServices.png create mode 100644 netinstall/8/nl/content/images/dx2-configureTimezoneUTC.png create mode 100644 netinstall/8/nl/content/images/dx2-configureX_card_list.png create mode 100644 netinstall/8/nl/content/images/dx2-configureX_chooser.png create mode 100644 netinstall/8/nl/content/images/dx2-configureX_monitor.png create mode 100644 netinstall/8/nl/content/images/dx2-diskdrake.png create mode 100644 netinstall/8/nl/content/images/dx2-doPartitionDisks.png create mode 100644 netinstall/8/nl/content/images/dx2-exitInstall.png create mode 100644 netinstall/8/nl/content/images/dx2-formatPartitions.png create mode 100644 netinstall/8/nl/content/images/dx2-installUpdates.png create mode 100644 netinstall/8/nl/content/images/dx2-license.png create mode 100644 netinstall/8/nl/content/images/dx2-media_selection.png create mode 100644 netinstall/8/nl/content/images/dx2-minimal-install.png create mode 100644 netinstall/8/nl/content/images/dx2-securityLevel.png create mode 100644 netinstall/8/nl/content/images/dx2-selectCountry.png create mode 100644 netinstall/8/nl/content/images/dx2-selectInstallClass.png create mode 100644 netinstall/8/nl/content/images/dx2-selectKeyboard.png create mode 100644 netinstall/8/nl/content/images/dx2-selectLanguage.png create mode 100644 netinstall/8/nl/content/images/dx2-selectMouse.png create mode 100644 netinstall/8/nl/content/images/dx2-setRootPassword.png create mode 100644 netinstall/8/nl/content/images/dx2-setupBootloader.png create mode 100644 netinstall/8/nl/content/images/dx2-setupSCSI.png create mode 100644 netinstall/8/nl/content/images/dx2-soundConfig.png create mode 100644 netinstall/8/nl/content/images/dx2-summaryBottom.png create mode 100644 netinstall/8/nl/content/images/dx2-takeOverHdConfirm.png create mode 100644 netinstall/8/nl/content/images/net-welcome2.png create mode 100644 netinstall/8/nl/content/images/netInstall-01.png create mode 100644 netinstall/8/nl/content/images/netInstall-02.png create mode 100644 netinstall/8/nl/content/images/netInstall-03.png create mode 100644 netinstall/8/nl/content/images/netInstall-04.png create mode 100644 netinstall/8/nl/content/images/netInstall-05.png create mode 100644 netinstall/8/nl/content/images/netInstall-06.png create mode 100644 netinstall/8/nl/content/images/netInstall-07.png create mode 100644 netinstall/8/nl/content/images/netInstall-08.png create mode 100644 netinstall/8/nl/content/images/netInstall-09.png create mode 100644 netinstall/8/nl/content/images/netInstall-10.png create mode 100644 netinstall/8/nl/content/images/netInstall-11.png create mode 100644 netinstall/8/nl/content/images/netInstall-12.png create mode 100644 netinstall/8/nl/content/images/netInstall-13.png create mode 100644 netinstall/8/nl/content/images/netInstall-14.png create mode 100644 netinstall/8/nl/content/images/netInstall-15.png create mode 100644 netinstall/8/nl/content/images/netInstall-16.png create mode 100644 netinstall/8/nl/content/images/netInstall-17.png create mode 100644 netinstall/8/nl/content/index.html create mode 100644 netinstall/8/nl/content/main.js create mode 100644 netinstall/8/nl/content/netStageTwo.html create mode 100644 netinstall/8/nl/content/nwSearchFnt.js create mode 100644 netinstall/8/nl/content/search/default.props create mode 100644 netinstall/8/nl/content/search/en-us.props create mode 100644 netinstall/8/nl/content/search/es-es.props create mode 100644 netinstall/8/nl/content/search/htmlFileInfoList.js create mode 100644 netinstall/8/nl/content/search/htmlFileList.js create mode 100644 netinstall/8/nl/content/search/index-1.js create mode 100644 netinstall/8/nl/content/search/index-2.js create mode 100644 netinstall/8/nl/content/search/index-3.js create mode 100644 netinstall/8/nl/content/search/ja-jp.props create mode 100644 netinstall/8/nl/content/search/nwSearchFnt.js create mode 100644 netinstall/8/nl/content/search/punctuation.props create mode 100644 netinstall/8/nl/content/search/stemmers/de_stemmer.js create mode 100644 netinstall/8/nl/content/search/stemmers/en_stemmer.js create mode 100644 netinstall/8/nl/content/search/stemmers/fr_stemmer.js create mode 100644 netinstall/8/nl/content/webhelp-custom.css create mode 100644 netinstall/8/nl/content/webhelp-default.css create mode 100644 netinstall/8/nl/index.html (limited to 'netinstall') diff --git a/netinstall/8/nl/content/ar01s01.html b/netinstall/8/nl/content/ar01s01.html new file mode 100644 index 00000000..d407d15f --- /dev/null +++ b/netinstall/8/nl/content/ar01s01.html @@ -0,0 +1,59 @@ + + + + + Introductie

Introductie

Netinstallatie-media

Beschrijving

Deze minimale ISO's bevatten:

  • minder dan 100 MB en zijn handig als de internetbandbreedte te laag is om +een volledige DVD te downloaden, of als je een PC hebt zonder DVD-drive of +niet kan opstarten vanaf een USB-stick.

  • niet meer dan wat nodig is om a) het +DrakX-installatieprogramma te starten en b) het vinden +van het DrakX-installer-stage2 en andere pakketten die +nodig zijn om de installatie voort te zetten en te voltooien.

De benodigde bronpakketten kunnen op de harde schijf van een PC, een lokaal +station, een lokaal netwerk of op het internet staan.

Opmerking

Installatie via versleutelde wifi of bluetooth wordt niet ondersteund.

Beschikbaarheid

Er zijn twee versies van de NetInstall media:

  • netinstall.iso Voor degenen die liever geen +niet-vrije software gebruiken, bevat deze ISO alleen vrije software.

  • netinstall-nonfree.iso Deze ISO bevat +aanvullende gepatenteerde stuurprogramma's, die mogelijk nodig zijn voor uw +netwerkapparaat, schijfbeheerder, enz.

Beide versies zijn beschikbaar in de vorm van afzonderlijke 32-bit en 64-bit +ISO's. U kunt ze hier vinden: https://www.mageia.org/downloads/

Voorbereiding

Na het downloaden van het beeldbestand, brand het op een CD/DVD of, als u +het liever op een USB-stick wilt zetten, volg de instructies hier: https://wiki.mageia.org/en/Installation_Media#Dump_Mageia_ISOs_on_an_USB_stick

Installatie fasen

De installatie wordt uitgevoerd in twee fasen:

  • Fase 1 Dit is de fase voorafgaand aan de +installatie. U moet de methode en de details voor de toegang tot het medium +met de bestanden die voor de installatie moeten worden gebruikt opgeven. Als +de methode een server betreft, dan wordt de netwerkverbinding geactiveerd.

  • Fase 2 Dit is de werkelijke +installatiefase, die automatisch zal beginnen zodra een verbinding met de +installatiebestanden tot stand is gebracht.

Opmerking

Tijdens fase 1, zal er niets geschreven worden op uw harde schijf, dus het +is veilig om op elk gewenst moment te stoppen. U kunt dit doen door +Ctrl+Alt+Del in te drukken.

Tip

U kunt Alt+F3 +indrukken om het logboek te lezen en Alt+F1 om weer terug te keren naar het +installatiescherm.

Waarschuwing

In tegenstelling tot het installeren via DVD of LiveCD, wordt tijdens het +eerste deel van de installatie (Fase 1), u +gevraagd om dingen te typen. Tijdens deze fase, zal uw toetsenbord werken +als een Amerikaans +toetsenbord. Dit kan erg verwarrend zijn wanneer u namen en paden +moet typen.

© Mageia
CC BY-SA 3.0
Uploaded on 11/03/2021
Terug   Volgende
 Begin 
loading table of contents...
diff --git a/netinstall/8/nl/content/ar01s02.html b/netinstall/8/nl/content/ar01s02.html new file mode 100644 index 00000000..8420ecd5 --- /dev/null +++ b/netinstall/8/nl/content/ar01s02.html @@ -0,0 +1,78 @@ + + + + + Fase 1 (Voorafgaand aan de installatie)

Fase 1 (Voorafgaand aan de installatie)

Opstarten

Het specifieke welkomstscherm dat u zult zien wanneer u +opstart met de NetInstall-media, hangt af van of u opstart op een BIOS- of +UEFI-systeem. Zie de volgende twee schermafbeeldingen:

Figuur 1. BIOS Welkomscherm

BIOS Welkomscherm

Bij het opstarten, kunt u ervoor kiezen om de geavanceerde hulp te lezen +door op F2 te drukken en u kunt terugkeren naar het +installatiescherm door op F1 te drukken. Anders zal het +opstarten verder gaan aan de hand van de standaardinstellingen.

Figuur 2. UEFI Welkomscherm

UEFI Welkomscherm

  • Gebruik de pijltoetsen om Start Mageia Installatie te +markeren en druk vervolgens op Enter.

Voor zowel BIOS- als UEFI-systemen ziet u dan een pop-upmelding waarin staat +dat USB-apparaten worden gedetecteerd:

Installatiemethode

U kunt nu een installatiemethode kiezen via CDROM/HDD of Server (NFS, FTP of +HTTP).

U hebt ook de mogelijkheid om op dit punt modules van derden te laden.

  • Ga met de pijltoetsen omhoog of omlaag in de lijst totdat de juiste +installatiemethode is gemarkeerd.

  • Druk op de Tab-toets totdat Oke is +gemarkeerd en druk vervolgens op Enter.

Server

  • Als u niet weet wat u moet kiezen voor een Netwerkinstallatie, kies dan +FTP-server.

  • Op een bedrijfsnetwerk, kan FTP en rsync worden geblokkeerd, dus het +gebruiken van een HTTP-server is een goede keuze in dit +geval.

Na het kiezen van een van de serveropties gaat u automatisch verder met het +Network Connection gedeelte.

CDROM/HDD

Als u ervoor kiest om te installeren vanaf een cd-rom of harde schijf (of +USB-stick), zal een scan voor opslagapparaten worden uitgevoerd:

  • Selecteer eerst de relevante harde schijf (of USB-stick)

  • Gevolgd door de relevante partitie

  • Geef vervolgens de map of de bestandsnaam van de ISO op

Het open laten staan van deze map, of het gebruik van de map is +gemakkelijker, omdat het installatieprogramma u dan een lijst met mappen en +bestanden presenteert waaruit u uw keuze kunt maken door met de pijlen +omhoog en omlaag te navigeren, zoals u kunt zien in de tweede afbeelding van +de volgende afbeeldingen.

Zodra de informatie is verstrekt voor de locatie van de ISO, hetzij op +cd-rom of op de harde schijf, gaat u automatisch verder met Stage 2 (de werkelijke installatiefase).

Modules van derde partijen laden

Als u modules van derden wilt laden, wordt u gevraagd +naar de locatie van de map met de modules:

Netwerkverbinding

Verbindingsapparaat

Als u bij de stap Installatiemethode een van de +serveropties hebt gekozen, wordt u vervolgens gevraagd een netwerkapparaat +te kiezen:

Verbindingstype

Nu moet u kiezen of het netwerkapparaat een DHCP-, Statische of +ADSL-verbinding zal gebruiken:

Als u niet zeker weet welke optie geschikt is, dan is het waarschijnlijk het +beste de standaardoptie te accepteren (DHCP).

Host/Domeinnamen

Indien nodig kunt u nu uw host- en domeinnamen opgeven:

  • Als u niet zeker weet wat dit betekent, kunt u de velden gewoon leeg laten, +Ok markeren en vervolgens op Enter +drukken om door te gaan. De netwerkverbinding wordt nu geactiveerd.

Als u gebruik maakt van FTP of HTTP, gaat u automatisch verder met het +Mirrors gedeelte

Als u NFS gebruikt, wordt u gevraagd om de naam van de NFS-server en de map +met de Mageia-distributie:

Na het invoeren van de NFS-gegevens, gaat u automatisch verder met +Stage 2 (de werkelijke +installatiefase).

Mirrors

Als u gebruik maakt van FTP of HTTP, moet u nu een mirror opgeven om te +gebruiken. Dit kan handmatig worden gedaan of door te kiezen uit een lijst

Handmatig opgeven

Een lijst van alle beschikbare mirrors vindt u hier: http://mirrors.mageia.org/

Welke mirror u ook kiest, hij moet dezelfde boomachtige structuur gebruiken +als "mageia" (of "Mageia") zoals gebruikt door de officiële +Mageia-mirrors. Dat betekent dus +.../mageia/distrib/<version>/<arch>

Een juiste invoer (bij gebruik van een officiële mirror) in het hieronder +getoonde veld Mageia map, zou kunnen zijn:

pub/linux/mageia/distrib/cauldron/i586

Een ander voorbeeld (voor Mageia 6 x86_64) zou zijn:

pub/Mirrors/Mageia/distrib/6/x86_64

Andere mirrors hebben mogelijk een verschillend padstructuur en de +onderstaande schermafbeeldingen tonen dergelijke voorbeelden:

Als u gebruik maakt van een FTP server:

Als u gebruik maakt van een HTTP server:

Zodra deze informatie is verstrekt, gaat u automatisch verder met +Stage 2 (de werkelijke +installatiefase).

Selecteer uit een lijst

Als u een heleboel ontbrekende afhankelijkheidsfouten later in de +installatie te zien krijgt, start dan opnieuw op en probeer een andere +spiegelserver.

Na het kiezen van een FTP-server, krijgt u een scherm te zien waar u +eventueel een loginnaam en wachtwoord kunt toevoegen indien dit nodig is.

Zodra deze informatie is verstrekt, gaat u automatisch verder met +Stage 2 (de werkelijke +installatiefase).

© Mageia
CC BY-SA 3.0
Uploaded on 11/03/2021
Terug   Volgende
 Begin 
loading table of contents...
diff --git a/netinstall/8/nl/content/draft.png b/netinstall/8/nl/content/draft.png new file mode 100644 index 00000000..59673fe1 Binary files /dev/null and b/netinstall/8/nl/content/draft.png differ diff --git a/netinstall/8/nl/content/images/dx-help.png b/netinstall/8/nl/content/images/dx-help.png new file mode 100644 index 00000000..32824349 Binary files /dev/null and b/netinstall/8/nl/content/images/dx-help.png differ diff --git a/netinstall/8/nl/content/images/dx2-add_supplemental_media.png b/netinstall/8/nl/content/images/dx2-add_supplemental_media.png new file mode 100644 index 00000000..8bff5269 Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-add_supplemental_media.png differ diff --git a/netinstall/8/nl/content/images/dx2-chooseDesktop.png b/netinstall/8/nl/content/images/dx2-chooseDesktop.png new file mode 100644 index 00000000..d2daf494 Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-chooseDesktop.png differ diff --git a/netinstall/8/nl/content/images/dx2-chooseMountpoints.png b/netinstall/8/nl/content/images/dx2-chooseMountpoints.png new file mode 100644 index 00000000..e1c2b359 Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-chooseMountpoints.png differ diff --git a/netinstall/8/nl/content/images/dx2-choosePackageGroups.png b/netinstall/8/nl/content/images/dx2-choosePackageGroups.png new file mode 100644 index 00000000..8c1cca9d Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-choosePackageGroups.png differ diff --git a/netinstall/8/nl/content/images/dx2-choosePackagesTree.png b/netinstall/8/nl/content/images/dx2-choosePackagesTree.png new file mode 100644 index 00000000..1d4036ec Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-choosePackagesTree.png differ diff --git a/netinstall/8/nl/content/images/dx2-configureServices.png b/netinstall/8/nl/content/images/dx2-configureServices.png new file mode 100644 index 00000000..c67dbe35 Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-configureServices.png differ diff --git a/netinstall/8/nl/content/images/dx2-configureTimezoneUTC.png b/netinstall/8/nl/content/images/dx2-configureTimezoneUTC.png new file mode 100644 index 00000000..f0516388 Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-configureTimezoneUTC.png differ diff --git a/netinstall/8/nl/content/images/dx2-configureX_card_list.png b/netinstall/8/nl/content/images/dx2-configureX_card_list.png new file mode 100644 index 00000000..c9cfcdbf Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-configureX_card_list.png differ diff --git a/netinstall/8/nl/content/images/dx2-configureX_chooser.png b/netinstall/8/nl/content/images/dx2-configureX_chooser.png new file mode 100644 index 00000000..8a0379bb Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-configureX_chooser.png differ diff --git a/netinstall/8/nl/content/images/dx2-configureX_monitor.png b/netinstall/8/nl/content/images/dx2-configureX_monitor.png new file mode 100644 index 00000000..b6457841 Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-configureX_monitor.png differ diff --git a/netinstall/8/nl/content/images/dx2-diskdrake.png b/netinstall/8/nl/content/images/dx2-diskdrake.png new file mode 100644 index 00000000..84592310 Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-diskdrake.png differ diff --git a/netinstall/8/nl/content/images/dx2-doPartitionDisks.png b/netinstall/8/nl/content/images/dx2-doPartitionDisks.png new file mode 100644 index 00000000..0a89fe7b Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-doPartitionDisks.png differ diff --git a/netinstall/8/nl/content/images/dx2-exitInstall.png b/netinstall/8/nl/content/images/dx2-exitInstall.png new file mode 100644 index 00000000..8a4155d1 Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-exitInstall.png differ diff --git a/netinstall/8/nl/content/images/dx2-formatPartitions.png b/netinstall/8/nl/content/images/dx2-formatPartitions.png new file mode 100644 index 00000000..5c3faa55 Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-formatPartitions.png differ diff --git a/netinstall/8/nl/content/images/dx2-installUpdates.png b/netinstall/8/nl/content/images/dx2-installUpdates.png new file mode 100644 index 00000000..efef63e9 Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-installUpdates.png differ diff --git a/netinstall/8/nl/content/images/dx2-license.png b/netinstall/8/nl/content/images/dx2-license.png new file mode 100644 index 00000000..80f72c14 Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-license.png differ diff --git a/netinstall/8/nl/content/images/dx2-media_selection.png b/netinstall/8/nl/content/images/dx2-media_selection.png new file mode 100644 index 00000000..d050b1ed Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-media_selection.png differ diff --git a/netinstall/8/nl/content/images/dx2-minimal-install.png b/netinstall/8/nl/content/images/dx2-minimal-install.png new file mode 100644 index 00000000..8bf6b751 Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-minimal-install.png differ diff --git a/netinstall/8/nl/content/images/dx2-securityLevel.png b/netinstall/8/nl/content/images/dx2-securityLevel.png new file mode 100644 index 00000000..2b8178a5 Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-securityLevel.png differ diff --git a/netinstall/8/nl/content/images/dx2-selectCountry.png b/netinstall/8/nl/content/images/dx2-selectCountry.png new file mode 100644 index 00000000..9e7114c3 Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-selectCountry.png differ diff --git a/netinstall/8/nl/content/images/dx2-selectInstallClass.png b/netinstall/8/nl/content/images/dx2-selectInstallClass.png new file mode 100644 index 00000000..cefd898e Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-selectInstallClass.png differ diff --git a/netinstall/8/nl/content/images/dx2-selectKeyboard.png b/netinstall/8/nl/content/images/dx2-selectKeyboard.png new file mode 100644 index 00000000..e44aa147 Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-selectKeyboard.png differ diff --git a/netinstall/8/nl/content/images/dx2-selectLanguage.png b/netinstall/8/nl/content/images/dx2-selectLanguage.png new file mode 100644 index 00000000..3e86d68f Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-selectLanguage.png differ diff --git a/netinstall/8/nl/content/images/dx2-selectMouse.png b/netinstall/8/nl/content/images/dx2-selectMouse.png new file mode 100644 index 00000000..a9a1e05b Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-selectMouse.png differ diff --git a/netinstall/8/nl/content/images/dx2-setRootPassword.png b/netinstall/8/nl/content/images/dx2-setRootPassword.png new file mode 100644 index 00000000..863495a9 Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-setRootPassword.png differ diff --git a/netinstall/8/nl/content/images/dx2-setupBootloader.png b/netinstall/8/nl/content/images/dx2-setupBootloader.png new file mode 100644 index 00000000..70d9c1d5 Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-setupBootloader.png differ diff --git a/netinstall/8/nl/content/images/dx2-setupSCSI.png b/netinstall/8/nl/content/images/dx2-setupSCSI.png new file mode 100644 index 00000000..18c071c1 Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-setupSCSI.png differ diff --git a/netinstall/8/nl/content/images/dx2-soundConfig.png b/netinstall/8/nl/content/images/dx2-soundConfig.png new file mode 100644 index 00000000..fcef839f Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-soundConfig.png differ diff --git a/netinstall/8/nl/content/images/dx2-summaryBottom.png b/netinstall/8/nl/content/images/dx2-summaryBottom.png new file mode 100644 index 00000000..9db7544f Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-summaryBottom.png differ diff --git a/netinstall/8/nl/content/images/dx2-takeOverHdConfirm.png b/netinstall/8/nl/content/images/dx2-takeOverHdConfirm.png new file mode 100644 index 00000000..5099e5bd Binary files /dev/null and b/netinstall/8/nl/content/images/dx2-takeOverHdConfirm.png differ diff --git a/netinstall/8/nl/content/images/net-welcome2.png b/netinstall/8/nl/content/images/net-welcome2.png new file mode 100644 index 00000000..1a93c197 Binary files /dev/null and b/netinstall/8/nl/content/images/net-welcome2.png differ diff --git a/netinstall/8/nl/content/images/netInstall-01.png b/netinstall/8/nl/content/images/netInstall-01.png new file mode 100644 index 00000000..80f89173 Binary files /dev/null and b/netinstall/8/nl/content/images/netInstall-01.png differ diff --git a/netinstall/8/nl/content/images/netInstall-02.png b/netinstall/8/nl/content/images/netInstall-02.png new file mode 100644 index 00000000..5f1b0c73 Binary files /dev/null and b/netinstall/8/nl/content/images/netInstall-02.png differ diff --git a/netinstall/8/nl/content/images/netInstall-03.png b/netinstall/8/nl/content/images/netInstall-03.png new file mode 100644 index 00000000..b10ca3f2 Binary files /dev/null and b/netinstall/8/nl/content/images/netInstall-03.png differ diff --git a/netinstall/8/nl/content/images/netInstall-04.png b/netinstall/8/nl/content/images/netInstall-04.png new file mode 100644 index 00000000..1f4e476f Binary files /dev/null and b/netinstall/8/nl/content/images/netInstall-04.png differ diff --git a/netinstall/8/nl/content/images/netInstall-05.png b/netinstall/8/nl/content/images/netInstall-05.png new file mode 100644 index 00000000..11ba28d2 Binary files /dev/null and b/netinstall/8/nl/content/images/netInstall-05.png differ diff --git a/netinstall/8/nl/content/images/netInstall-06.png b/netinstall/8/nl/content/images/netInstall-06.png new file mode 100644 index 00000000..3abde05c Binary files /dev/null and b/netinstall/8/nl/content/images/netInstall-06.png differ diff --git a/netinstall/8/nl/content/images/netInstall-07.png b/netinstall/8/nl/content/images/netInstall-07.png new file mode 100644 index 00000000..9d9d73e7 Binary files /dev/null and b/netinstall/8/nl/content/images/netInstall-07.png differ diff --git a/netinstall/8/nl/content/images/netInstall-08.png b/netinstall/8/nl/content/images/netInstall-08.png new file mode 100644 index 00000000..e8fffa12 Binary files /dev/null and b/netinstall/8/nl/content/images/netInstall-08.png differ diff --git a/netinstall/8/nl/content/images/netInstall-09.png b/netinstall/8/nl/content/images/netInstall-09.png new file mode 100644 index 00000000..113e33f9 Binary files /dev/null and b/netinstall/8/nl/content/images/netInstall-09.png differ diff --git a/netinstall/8/nl/content/images/netInstall-10.png b/netinstall/8/nl/content/images/netInstall-10.png new file mode 100644 index 00000000..0a6b2c33 Binary files /dev/null and b/netinstall/8/nl/content/images/netInstall-10.png differ diff --git a/netinstall/8/nl/content/images/netInstall-11.png b/netinstall/8/nl/content/images/netInstall-11.png new file mode 100644 index 00000000..a840692f Binary files /dev/null and b/netinstall/8/nl/content/images/netInstall-11.png differ diff --git a/netinstall/8/nl/content/images/netInstall-12.png b/netinstall/8/nl/content/images/netInstall-12.png new file mode 100644 index 00000000..414380c9 Binary files /dev/null and b/netinstall/8/nl/content/images/netInstall-12.png differ diff --git a/netinstall/8/nl/content/images/netInstall-13.png b/netinstall/8/nl/content/images/netInstall-13.png new file mode 100644 index 00000000..2d510812 Binary files /dev/null and b/netinstall/8/nl/content/images/netInstall-13.png differ diff --git a/netinstall/8/nl/content/images/netInstall-14.png b/netinstall/8/nl/content/images/netInstall-14.png new file mode 100644 index 00000000..e02aead8 Binary files /dev/null and b/netinstall/8/nl/content/images/netInstall-14.png differ diff --git a/netinstall/8/nl/content/images/netInstall-15.png b/netinstall/8/nl/content/images/netInstall-15.png new file mode 100644 index 00000000..f3fb7b9e Binary files /dev/null and b/netinstall/8/nl/content/images/netInstall-15.png differ diff --git a/netinstall/8/nl/content/images/netInstall-16.png b/netinstall/8/nl/content/images/netInstall-16.png new file mode 100644 index 00000000..f8071eeb Binary files /dev/null and b/netinstall/8/nl/content/images/netInstall-16.png differ diff --git a/netinstall/8/nl/content/images/netInstall-17.png b/netinstall/8/nl/content/images/netInstall-17.png new file mode 100644 index 00000000..b444b8a1 Binary files /dev/null and b/netinstall/8/nl/content/images/netInstall-17.png differ diff --git a/netinstall/8/nl/content/index.html b/netinstall/8/nl/content/index.html new file mode 100644 index 00000000..9344a713 --- /dev/null +++ b/netinstall/8/nl/content/index.html @@ -0,0 +1,39 @@ + + + + + Mageia Netinstallatie

Opmerking

U zult niet alle installatieschermen zien die in deze handleiding besproken +worden. Welke schermen u krijgt hangt af van uw systeem en van de keuzes die +u tijdens het installeren maakt.

De teksten en de screenshots in deze handleiding zijn beschikbaar onder de +CC BY-SA 3.0 licentie http://creativecommons.org/licenses/by-sa/3.0/

Deze handleiding werd geproduceerd met behulp van het Calenco CMS, ontwikkeld door NeoDoc

Het is geschreven door vrijwilligers in hun vrije tijd. Neem contact op met +het Documentatieteam +als je mee wil helpen deze handleiding te verbeteren

Inhoud

Introductie
Netinstallatie-media
Installatie fasen
Fase 1 (Voorafgaand aan de installatie)
Opstarten
Installatiemethode
Netwerkverbinding
Mirrors
Fase 2 (installatie fase)
Taalkeuze
Licentie en uitgave-opmerkingen
Harde schijf detectie
Installeren of opwaarderen
Toetsenbord
Partitioning
Software
Gebruikersbeheer
Graphical Configuration
Bootloader
Configuration Summary
Locale
Configureer uw diensten
Muiskeuze
Geluidsconfiguratie
Beveiligingsniveau
Firewall
Updates
Gefeliciteerd
Mageia deïnstalleren
© Mageia
CC BY-SA 3.0
Uploaded on 11/03/2021
   Volgende
loading table of contents...
diff --git a/netinstall/8/nl/content/main.js b/netinstall/8/nl/content/main.js new file mode 100644 index 00000000..011818d1 --- /dev/null +++ b/netinstall/8/nl/content/main.js @@ -0,0 +1,179 @@ +/** + * Miscellaneous js functions for WebHelp + * Kasun Gajasinghe, http://kasunbg.blogspot.com + * David Cramer, http://www.thingbag.net + * + */ + +$(document).ready(function() { + // $("#showHideHighlight").button(); //add jquery button styling to 'Go' button + //Generate tabs in nav-pane with JQuery + $(function() { + $("#tabs").tabs({ + cookie: { + // store cookie for 2 days. + expires: 2 + } + }); + }); + + //Generate the tree + $("#ulTreeDiv").css("display","block"); + $("#tree").treeview({ + collapsed: true, + animated: "medium", + control: "#sidetreecontrol", + persist: "cookie" + }); + + //after toc fully styled, display it. Until loading, a 'loading' image will be displayed + $("#tocLoading").css("display", "none"); + //$("#ulTreeDiv").attr("style","display:block;"); + + //.searchButton is the css class applied to 'Go' button + $(function() { + $("button", ".searchButton").button(); + + $("button", ".searchButton").click(function() {return false;}); + }); + + //'ui-tabs-1' is the cookie name which is used for the persistence of the tabs.(Content/Search tab) + if ($.cookie('ui-tabs-1') === '1') { //search tab is visible + if ($.cookie('textToSearch') != undefined && $.cookie('textToSearch').length > 0) { + document.getElementById('textToSearch').value = $.cookie('textToSearch'); + Verifie('diaSearch_Form'); + searchHighlight($.cookie('textToSearch')); + //$("#showHideHighlight").css("display","block"); + } + } + + syncToc(); //Synchronize the toc tree with the content pane, when loading the page. + //$("#doSearch").button(); //add jquery button styling to 'Go' button +}); + +/** + * Synchronize with the tableOfContents + */ +function syncToc(){ + var a = document.getElementById("webhelp-currentid"); + if (a != undefined) { + var b = a.getElementsByTagName("span")[0]; + + + if (b != undefined) { + //Setting the background for selected node. + //b.setAttribute("style", "color: white; background-color: #a7a9ac;"); + b.style.color = "#FFFFFF"; + b.style.backgroundColor = "#a7a9ac"; + } + + //shows the node related to current content. + //goes a recursive call from current node to ancestor nodes, displaying all of them. + while (a.parentNode && a.parentNode.nodeName) { + var parentNode = a.parentNode; + var nodeName = parentNode.nodeName; + + if (nodeName.toLowerCase() == "ul") { + parentNode.style.display = "block"; + + // Expand the current entry + var u = a.getElementsByTagName("ul")[0]; + if (u) { + u.style.display = "block"; + } + } else if (nodeName.toLocaleLowerCase() == "li") { + parentNode.setAttribute("class", "collapsable"); + parentNode.firstChild.setAttribute("class", "hitarea collapsable-hitarea "); + } + a = parentNode; + } + + if (b != undefined) { + b.scrollIntoView(); + } + } +} + +/** + * Code for Show/Hide TOC + * + */ +function showHideToc() { + var showHideButton = $("#showHideButton"); + var leftNavigation = $("#leftnavigation"); + var content = $("#content"); + + if (showHideButton != undefined && showHideButton.hasClass("pointLeft")) { + //Hide TOC + showHideButton.removeClass('pointLeft').addClass('pointRight'); + content.css("margin", "0 0 0 0"); + leftNavigation.css("display","none"); + showHideButton.attr("title", "Show table of contents"); + } else { + //Show the TOC + showHideButton.removeClass('pointRight').addClass('pointLeft'); + content.css("margin", "0 0 0 315px"); + leftNavigation.css("display","block"); + showHideButton.attr("title", "Hide table of contents"); + } +} + +/** + * Code for searh highlighting + */ +var highlightOn = true; +function searchHighlight(searchText) { + highlightOn = true; + if (searchText != undefined) { + var wList; + var sList = new Array(); //stem list + //Highlight the search terms + searchText = searchText.toLowerCase().replace(/<\//g, "_st_").replace(/\$_/g, "_di_").replace(/\.|%2C|%3B|%21|%3A|@|\/|\*/g, " ").replace(/(%20)+/g, " ").replace(/_st_/g, " + + + + Fase 2 (installatie fase)

Fase 2 (installatie fase)

Er is op dit moment nog niets naar uw harde schijf geschreven. Als u daarom +besluit om niet verder te gaan met de daadwerkelijke installatie, kunt u nu +veilig opnieuw opstarten: ga naar tty2 met Ctrl+Alt+F2 +en druk Ctrl+Alt+Del (of Ctrl+Alt+F7 om terug te gaan als u +van gedachten verandert).

Taalkeuze

  • Select your preferred language, by first expanding the list for your +continent. Mageia will use this selection during the installation and for +your installed system.

  • If it is likely that you (or others) will require several languages to be +installed on your system, then you should use the Multiple +languages option to add them now. It will be difficult to add +extra language support after installation.

Belangrijk

Even if you choose more than one language, you must first choose one as your +preferred language from the main list of languages. It will also be marked +as chosen in the Multiple languages screen.

  • If your keyboard language is not the same as your preferred language, then +it is advisable to install the required language for your keyboard as well

  • Mageia uses UTF-8 (Unicode) support by default. This may be disabled in the +Multiple languages screen if you know that it is +inappropriate for your language. Disabling UTF-8 applies to all installed +languages.

  • You can change the language for your system post-installation in the +Mageia Control Center → System → localization for your +system.

Licentie en uitgave-opmerkingen

Licentie-overeenkomst

  • Lees de voorwaarden van de licentie-overeenkomst a.u.b. aandachtig door, +voordat u Mageia installeert.

  • Deze voorwaarden hebben betrekking op de gehele Mageia-distributie en moeten +aanvaard worden voordat u verder kunt gaan.

  • Om verder te gaan, selecteer Accepteren en klik +vervolgens op Volgende.

Als u de licentievoorwaarden niet wenst te accepteren, dan danken we u voor +uw interesse in Mageia. Wanneer u op Weigeren klikt zal +uw computer opnieuw opstarten.

Uitgave-opmerkingen

Belangrijke informatie over deze specifieke Mageia-uitgave kunt u zien door +op de Uitgave-opmerkingen-knop te klikken.

Harde schijf detectie

DrakX will normally detect hard disks correctly. However, with some older +SCSI controllers it may be unable to determine the correct drivers to use +and subsequently fail to recognise the drive.

If your device is not recognised, you will need to manually tell DrakX which +SCSI drive(s) you have. DrakX should then be able to configure the drive(s) +correctly.

Installeren of opwaarderen

  • Install

    Use this option to perform a fresh installation of Mageia. This will format +the root partition (/), but can +preserve a pre-existing /home partition (a dedicated +/home partition, rather than being incorporated within the root (/) +partition itself).

  • Upgrade

    Use this option to upgrade an existing installation of Mageia.

Belangrijk

Only upgrading from a previous Mageia version that was still +supported when this Installer's version was released, has been +thoroughly tested. If you want to upgrade a Mageia version that has reached +its “End Of Life” then it is better to do a +“clean” install instead, while preserving your +/home partition.

Tip

If you have discovered that you forgot to select an additional language, you +can return from the Install or Upgrade screen to the +language choice screen by pressing Ctrl+Alt+Home. Do NOT do this later in the install.

Toetsenbord

DrakX selecteert een geschikte toetsenbord-indeling voor uw taal, maar als +dat niet lukt zal hij uitgaan van een VS-toetsenbordindeling (US QWERTY).

  • Verzekert u zich er van dat de gekozen selectie juist is. Als u niet weet +wat voor indeling uw toetsenbord heeft, kijk dan in de specificaties die +meegeleverd werden of vraag het aan de leverancier. Er kan zelfs een label +aan het toetsenbord zitten dat de indeling identificeert. U kunt ook hier +kijken: en.wikipedia.org/wiki/Keyboard_layout +(Engelstalig)

  • If your keyboard isn't in the list shown, click on More +to get a fuller list, and select your keyboard there.

    Opmerking

    After choosing a keyboard from the More dialogue, +you'll return to the first keyboard choice dialogue and it will seem as +though a keyboard from that screen was chosen. You can safely ignore this +and continue the installation: the keyboard chosen from the full list will +be applied.

  • If you choose a keyboard based on non-Latin characters, you will see an +extra dialogue screen asking how you would prefer to switch between the +Latin and non-Latin keyboard layouts

Partitioning

Suggested Partitioning

In this screen you can see the content of your hard drive(s) along with the +DrakX partitioning proposals for where to install Mageia.

The actual options available from those shown below will vary according to +the layout and content of your particular hard drive(s).

Main Options

  • Use Existing Partitions

    Als deze optie beschikbaar is, werden bestaande Linux compatibele partities +gevonden die gebruikt kunnen worden voor het installeren.

  • Use Free Space

    Als u ongebruikte ruimte op uw harde schijf heeft die u voor uw nieuwe +Mageia-installatie wilt gebruiken, kies dan deze optie.

  • Use Free Space on a Windows Partition

    If you have unused space on an existing Windows partition, the installer may +offer to use it. This can be a useful way of making room for your new Mageia +installation, but is a risky operation so you should make sure you have +backed up all important files!

    With this option, the installer displays the remaining Windows partition in +light blue and the proposed Mageia partition in dark blue with their +intended sizes just underneath. You have the option to modify these sizes by +clicking and dragging the gap between both partitions. See the following +screenshot:

  • Erase and use Entire Disk

    This option will allocate the entire drive for Mageia

    Waarschuwing

    This will erase ALL data on the selected hard drive. Take care! If you +intend to use part of the disk for something else, or you already have data +on the drive that you are not prepared to lose, then do not use this option.

    Belangrijk

    Merk op dat de Windows partitie hiervoor kleiner gemaakt moet worden, wat +niet zonder enig risico is. De partitie moet "schoon" zijn, wat inhoudt dat +Windows correct afgesloten moet zijn toen het voor het laatst gebruikt werd +en dat het gedefragmenteerd moet zijn. Dit is echter geen garantie dat alle +bestanden op de partitie uit het gebied gehaald zijn dat op het punt staat +gebruikt te worden. Het wordt sterk aanbevolen om vooraf een kopie van uw +persoonlijke bestanden te maken op een andere schijf of lokatie.

  • Custom Disk Partitioning

    Hiermee krijgt u volledige controle over het plaatsen van de installatie op +uw harde schijf of schijven.

If you are not using the Custom disk partitioning +option, then the installer will allocate the available space according to +the following rules:

  • If the total available space is less than 50 GB, then only one partition is +created. This will be the / (root) partition.

  • If the total available space is greater than 50 GB, then three partitions +are created

    • 6/19 of the total available place is allocated to / +with a maximum of 50 GB

    • 1/19 is allocated to swap with a maximum of 4 GB

    • the rest (at least 12/19) is allocated to /home

This means that from 160 GB or greater available space, the installer will +create three partitions:

  • 50 GB for /

  • 4 GB for swap

  • and the remainder for /home

Opmerking

If you are using a UEFI system, the ESP (EFI System Partition) will be +automatically detected - or created if it does not exist yet - and mounted +on /boot/EFI. The Custom disk +partitioning option is the only one that allows to check it has +been correctly done.

If you are using a Legacy (also known as BIOS) system with a GPT partitioned +disk, you need to create a BIOS boot partition if it doesn't already +exist. It should be about 1 MiB with no mount point. It can be created with +the Installer, under Custom disk partitioning, like any +other partition. Be sure to select “BIOS boot partition” for +filesystem type.

See DiskDrake for information on how to proceed.

Belangrijk

Some newer drives are now using 4096 byte logical sectors, instead of the +previous standard of 512. Due to lack of available hardware, the +partitioning tool used in the installer has not been tested with such a +drive.

Some SSD devices now use an erase block size over 1 MB. If you have such a +device we suggest that you partition the drive in advance, using an +alternative partitioning tool like gparted, and to use the following +settings:

  • Align to = MiB

  • Free space preceding (MiB) = 2

Also make sure all partitions are created using an even number of megabytes.

Kies de koppelpunten

Hier ziet u de Linux-partities die op de computer gevonden zijn. Als u het +niet eens bent met de koppelpunten die DrakX voorstelt, kunt u ze +veranderen.

  • Links van de keuzevelden staan de beschikbare partities. Bijvoorbeeld: +sda is een harde schijf en 5 is +een partitienummer, gevolgd door (grootte, +koppelpunt, bestandssysteemtype) van de partitie.

  • Als u meerdere partities heeft, kunt u verscheidene +koppelpunten kiezen uit de uitvouwlijsten, zoals +/, /home en +/var. U kunt zelfs uw eigen koppelpunten maken, +bijvoorbeeld /video voor een partitie waarop u uw films +wilt bewaren, of /Data voor al uw gegevensbestanden.

  • U kunt het koppelpuntveld leeg laten voor partities waarvan u geen gebruik +hoeft te maken.

Waarschuwing

Als u veranderingen aanbrengt, zorg dan dat u tenminste een +/ (root)partitie houdt.

Tip

If you are not sure what to choose, click Previous to +go back and then tick Custom disk partitioning, where +you can click on a partition to see its type and size.

Als u zeker bent dat de koppelpunten goed zijn, klik dan op +Volgende en kies of u enkel de partities wilt +formatteren die DrakX voorstelt, of meer.

Bevestig het formatteren van de harde schijf

  • Click on Previous if you are at all unsure about your +choice.

  • Click on Next to proceed if you are sure that it is OK +to erase every partition, every operating system and all +data that might be on that hard disk.

Custom Disk Partitioning with DiskDrake

  • Modify the layout of your disk(s) here. You can remove or create partitions, +change the filesystem or size of a partition and even view their details +before you start.

  • There is a tab at the top for every detected hard disk (or other storage +device, like a USB key). In the screenshot above there are two available +devices: sda and sdb.

  • For all other actions: click on the desired partition first. Then view it, +or choose a filesystem and a mount point, resize it or wipe +it. Expert mode provides more options such as to label +(name) a partition, or to choose a partition type.

  • Continue until you have adjusted everything to your satisfaction, then click +Done when you're ready.

Waarschuwing

  1. Take care with the Clear all option, use it only if you +are sure you want to wipe all partitions on the selected storage device.

  2. If you wish to use encryption on your / partition you +must ensure that you have a separate /boot +partition. The encryption option for the /boot +partition must NOT be set, otherwise your system will be unbootable.

Belangrijk

  • If you are installing Mageia on a UEFI system, check that an ESP (EFI System +Partition) is present and correctly mounted on +/boot/EFI. See Figure 1 below.

  • If you are installing Mageia on a Legacy/GPT system, check that a BIOS boot +partition is present and of the correct type. See Figure 2 below.

Figuur 3. EFI System Partition

EFI System Partition

Figuur 4. BIOS boot partition

BIOS boot partition

Formatteren

Here you can choose which partition(s) you wish to format. Any data on +partitions not marked for formatting will be preserved.

Usually, at least the partitions that DrakX selected need to be formatted.

Click on Advanced to choose the partitions you want to +check for so-called bad blocks

Tip

If you're not sure you have made the right choice, you can click on +Previous, again on Previous and +then on Custom to get back to the main screen, where +you can choose to view details of your partitions.

When you are confident about the selections, click on +Next to continue.

Software

Media Selection

Aanvullende installatiebronnen

In dit scherm ziet u de lijst van reeds gevonden media. U kunt andere +pakketbronnen toevoegen, zoals een optische schijf of een netwerkbron. De +mediaselectie bepaalt welke pakketten in de volgende stappen beschikbaar +zullen zijn.

Voor een netwerkbron dienen twee stappen gevolgd te worden:

  1. Kiezen en activeren van het netwerk, tenzij reeds actief.

  2. Kiezen van een mirror of specificeren van een URL (de allereerste +keuze). Door een mirror te kiezen heeft u toegang tot alle bronnen die +beheerd worden door Mageia, zoals de Nonfree-, +Tainted- en Updatesbronnen. Met de +URL kunt u ook een specifieke bron opgeven of uw eigen NFS-installatie.

Opmerking

Als u een 64-bitsinstallatie die mogelijk enige 32-bitspakketten bevat, +opwaardeert, voeg dan hier een online mirror toe door één van de +netwerkprotocollen te selecteren. De 64-bits-dvd bevat enkel 64-bits- en +noarch-pakketten, hij kan geen 32-bitspakketten +opwaarderen. Dat kan echter wel als u een online mirror toevoegt, de +32-bitspakketten worden dan daar opgehaald.

Available Media

Hier vindt u de lijst van beschikbare bronnen. Niet alle bronnen zijn +beschikbaar, overeenkomstig de media die U gebruikt om van te +installeren. De selectie van bronnen bepaalt welke pakketten beschikbaar +zijn ter keuze in de volgende stappen.

  • De Core bron kan niet uitgeschakeld worden, want ze +bevat de basis van de distributie.

  • The Nonfree repository includes packages that are +free-of-charge, i.e. Mageia may redistribute them, but they contain +closed-source software (hence the name - Nonfree). For example this +repository includes nVidia and AMD graphics card proprietary drivers, +firmware for various WiFi cards, etc.

  • The Tainted repository includes packages released under +a free license. The main criteria for placing packages in this repository is +that they may infringe patents and copyright laws in some countries, +e.g. multimedia codecs needed to play various audio/video files; packages +needed to play commercial video DVD's, etc.

Werkomgevingselectie

Some choices made here will open other screens with related options.

After the selection step(s), you will see a slideshow during the +installation of required packages. The slideshow can be disabled by pressing +the Details button.

  • Choose whether you prefer to use the KDE Plasma or GNOME desktop +environment. Both come with a full set of useful applications and tools.

  • Select Custom if you do not wish to use either (or, +actually use both) of these, or if you want to modify the default software +choices for these desktop environments. The LXDE desktop, for instance, is +lighter than the previous two, sporting less eye candy and having fewer +packages installed by default.

Pakketgroepselectie

Packages are arranged into common groups, to make choosing what you need on +your system a lot easier. The groups are fairly self explanatory, however +more information about the content of each is available in tool-tips which +become visible as the mouse is hovered over them.

  • Workstation

  • Server

  • Graphical Environment

  • Individual Package Selection: you can use +this option to manually add or remove packages

See Minimal Install for instructions on how to do a +minimal install (without or with X & IceWM).

Minimale installatie

Minimal Installation is intended for those with specific uses in mind for +Mageia, such as a server or a specialised workstation. You will probably use +this option combined with the Individual package +selection option to fine-tune your installation. See Choose Packages Tree.

  • You can choose a Minimal Installation by de-selecting +everything in the Package Group Selection screen, see +Choose Package Groups.

    If desired, you can additionally tick the Individual package +selection option in the same screen.

  • If you choose this installation method, then the relevant screen (see +screenshot below) will offer you a few useful extras to install, such as +documentation and “X”.

    If the With X option is selected, then IceWM (a +lightweight desktop environment) will also be included.

The basic documentation is provided in the form of “man” and +“info” pages. It contains the man pages from the Linux Documentation +Project and the GNU +coreutils info pages.

Softwarebeheer

Here you can add or remove any extra packages to customize your +installation.

After having made your choice, you can click on the +floppy icon at the bottom of the page to save your +choice of packages (saving to a USB key works, too). You can then use this +file to install the same packages on another system, by pressing the same +button during install and choosing to load it.

Gebruikersbeheer

Beheerderswachtwoord (root) instellen:

Voor elke Mageia installatie wordt aanbevolen een +superuser-wachtwoord (beheerderswachtwoord) in te +stellen. In Linux heet dit gewoonlijk het +rootwachtwoord. Terwijl u een wachtwoord in het +bovenste tekstvak typt, zal het schildje ernaast van rood via geel in groen +verkleuren, afhankelijk van de sterkte van het wachtwoord. Een groen schild +betekent dat u een goed wachtwoord heeft. Herhaal het wachtwoord in het +volgende vak, ter controle om typefouten uit te sluiten.

Opmerking

Alle wachtwoorden zijn hoofdlettergevoelig. In een wachtwoord is het het +beste een mengeling te gebruiken van hoofdletters en kleine letters, cijfers +en andere tekens.

Voer een gebruiker in

Voeg hier een gebruiker toe. Een gebruiker heeft minder rechten dan de +superuser (root), maar genoeg om te internetten, +kantoortoepassingen te gebruiken, te gamen en al het andere te doen waar een +normaal mens zijn computer voor gebruikt.

  • Pictogram

    Klik op het pictogram van de gebruiker om het te veranderen.

  • Volledige naam

    Voer de volledige naam van de gebruiker in dit tekstvak in.

  • Aanmeldnaam

    Voer hier de inlognaam van de gebruiker in, of laat DrakX er een kiezen op +basis van de volledige naam. De inlognaam is +hoofdlettergevoelig.

  • Wachtwoord

    Typ het wachtwoord van de gebruiker. Aan het eind van het tekstvak is een +schild dat de sterkte van het wachtwoord weergeeft. (Zie ook Opmerking)

    Wachtwoord (nogmaals): Herhaal het +gebruikerswachtwoord. DrakX zal checken of beide wachtwoorden gelijk zijn.

Opmerking

Elke gebruiker die u toevoegt tijdens het installeren van Mageia, krijgt een +thuismap die beschermd is tegen zowel lezen als schrijven (umask=0027).

Verdere benodigde gebruikers kunt u toevoegen tijdens de installatiestap +Configuratie - Samenvatting. Kies +Gebruikersbeheer.

De toegangsrechten kunnen na het installeren ook nog veranderd worden.

Gebruikersbeheer (geavanceerd)

De optie Geavanceerd laat u verdere instellingen +bewerken voor de gebruiker die u toevoegt.

  • Shell: In deze uitvouwlijst kan de shell veranderd +worden voor de gebruiker die u in het vorige scherm +toevoegde. Bash, Dash en +Sh zijn de opties.

  • Gebruikers-ID: Hier kunt u het gebruikers-ID instellen +voor de gebruiker die u in het vorige scherm toegevoegde. Laat dit vak leeg +als u niet zeker weet waartoe het dient.

  • Groeps-ID: Hier kan de groeps-ID ingesteld +worden. Nogmaals, bij twijfel leeg laten.

Graphical Configuration

Configuratie van grafische kaart en monitor

No matter which graphical environment (also known as desktop environment) +you chose for this install of Mageia, they are all based on a graphical user +interface system called X Window System, or simply +“X”. So in order for KDE Plasma, GNOME, LXDE or any other +graphical environment to work well, the following “X” settings +need to be correct.

Choose the appropriate settings manually if you think the details are +incorrect, or if none are shown.

  • Graphic Card

    If you need to, you can select a specific card from this expandable +list. See de paragraaf “Kies een X-server (Configureer uw grafische kaart)”.

  • Monitor

    You can choose Plug 'n Play, if applicable, or choose your monitor from the +Vendor or Generic lists. Choose +Custom if you prefer to manually set the horizontal and +vertical refresh rates of your monitor. See de paragraaf “Beeldscherm (Selecteer een monitor)”.

  • Resolution

    The resolution and color depth of your monitor can be set here.

  • Test

    The test button does not always appear during install. If the option is +there, and you test your settings, you should be asked to confirm that your +settings are correct. If you answer Yes, the settings +will be kept. If you don't see anything, you'll return to the configuration +screen and be able to reconfigure everything until the test result is +satisfactory. If the test option is not available, then make sure your +settings are on the safe side.

  • Options

    Here you can choose to enable or disable various options.

Waarschuwing

There is a risk of damaging a monitor if you choose refresh rates that are +outside the frequency range of that monitor. This applies to older CRT +displays: modern monitors will reject an unsupported frequency and normally +enter standby mode.

Kies een X-server (Configureer uw grafische kaart)

DrakX heeft een veelomvattende gegevensbank van videokaarten en zal uw +grafische kaart gewoonlijk juist identificeren.

Als het installatieprogramma uw videokaart niet correct gedetecteerd heeft +en u weet welke u heeft, kunt u deze in de boomstructuur selecteren via:

  • Vendor

  • then the make of your card

  • and the model of card

If you cannot find your card in the vendor lists (because it's not yet in +the database or it's an older card) you may find a suitable driver in the +Xorg category, which provides more than 40 generic and +open source video card drivers. If you still can't find a specific driver +for your card there is the option of using the VESA driver which provides +basic capabilities.

Let op

Be aware that if you select an incompatible driver you may only have access +to the Command Line Interface

Some video card manufacturers provide proprietary drivers for Linux which +may only be available in the Nonfree repository and in +some cases only from the card manufacturers' websites. The +Nonfree repository needs to be explicitly enabled to +access them. If you didn't enable it previously, you should do this after +your first reboot.

Beeldscherm (Selecteer een monitor)

DrakX heeft een uitgebreid gegevensbestand met monitors en zal de uwe +gewoonlijk correct identificeren.

Waarschuwing

Selecting a monitor with different characteristics +could damage your monitor or video hardware. Please don't try something +without knowing what you are doing. If in doubt you should +consult your monitor documentation.

Custom

This option allows you to set two critical parameters: the vertical refresh +rate and the horizontal sync rate. Vertical refresh determines how often the +screen is refreshed and horizontal sync is the rate at which scan lines are +displayed.

Het is ERG BELANGRIJK dat u geen beeldscherm instelt +met andere mogelijke verversingsfrequenties dan die van uw monitor: u zou uw +monitor kunnen beschadigen. Raadpleeg de handleiding van uw monitor en wees +terughoudend bij het instellen in geval van twijfel.

Plug'n Play

This is the default option and automatically tries to determine the monitor +type from the monitor database.

Vendor

Als DrakX uw beeldscherm niet goed herkent en u weet welke monitor u heeft, +kunt u deze als volgt in de boomstructuur kiezen:

  • Manufacturer

  • Monitor model

Generic

Selecting this group will list nearly 30 display configurations such as +1024x768 @ 60Hz and includes flat-panel displays as used in laptops. This is +often a good monitor selection group if you need to use the VESA card driver +when your video hardware cannot be determined automatically. Once again it +may be wise to be conservative in your selections.

Bootloader

Grub2

Grub2 on Legacy MBR/GPT systems

  • GRUB2 (with or without graphical menu) will be used exclusively as the +bootloader for a Legacy/MBR or Legacy/GPT system.

  • By default, a new bootloader will be written into either the MBR (Master +Boot Record) of your first hard drive or in the BIOS boot partition.

Grub2-efi on UEFI systems

  • GRUB2-efi will be used exclusively as the bootloader for a UEFI system.

  • By default, a new bootloader (Grub2-efi) will be written into the ESP (EFI +System Partition).

    If there are already UEFI-based operating systems installed on your computer +(Windows 8 for example), the Mageia installer will detect the existing ESP +created by Windows and add grub2-efi to it. If no ESP exists, then one will +be created. Although it is possible to have several ESPs, only one is +required, whatever the number of operating systems you have.

Bootloader Setup

Algemene opties voor de opstartlader

  • Bootloader to use

    This feature is only available to Legacy MBR/BIOS systems. Users of UEFI +systems will not see this option here.

  • Boot device

    Don't change this unless you really know what you are doing

  • Delay before booting the default image

    This text box lets you set a delay, in seconds, before the default operating +system is started up.

  • Security

    This allows you to set a password for the bootloader. This means a username +and password will be required when booting in order to select a booting +entry or change settings. This is optional, and most people are not likely +to have a need for it. The username is root and the +password is the one chosen hereafter.

  • Wachtwoord

    Choose a password for the bootloader (optional)

  • Password (again)

    Retype the password and DrakX will check that it matches with the one set +above

Advanced

  • Enable ACPI

    ACPI (Advanced Configuration and Power Interface) is a standard for power +management. It can save energy by stopping unused devices. Deselecting it +could be useful if, for example, your computer does not support ACPI or if +you think the ACPI implementation might cause some problems (for instance +random reboots or system lockups).

  • Enable SMP

    This option enables/disables symmetric multiprocessing for multi-core +processors

  • Enable APIC

    Enabling this gives the operating system access to the Advanced Programmable +Interrupt Controller. APIC devices permit more complex priority models, and +Advanced IRQ (Interrupt Request) management.

  • Enable Local APIC

    Here you can set Local APIC, which manages all external interrupts for a +specific processor in an SMP system

Bootloader Configuration

  • Default

    The operating system to be started up by default.

  • Append

    This option lets you pass information to the kernel or tell the kernel to +give you more information as it boots.

  • Probe foreign OS

    If you already have other operating systems installed, Mageia attempts to +add them to your new Mageia boot menu. If you don't want this behaviour, +then untick the Probe Foreign OS option.

Advanced

  • Video mode

    This sets the screen size and colour depth to be used by the boot menu. If +you click the down-triangle you will be offered other size and colour depth +options.

  • Do not touch ESP or MBR

    Select this option if you don't want a bootable Mageia, but would rather +chain-load it from another OS. You will get a warning that the bootloader is +missing. Click Ok if you are sure you understand the +implications, and wish to proceed.

Other Options

Een bestaande opstartlader gebruiken

The exact procedure for adding Mageia to an existing bootloader is beyond +the scope of this documentation. However in most cases it will involve +running the relevant bootloader installation program, which should detect +Mageia and automatically add an entry for it in the bootloader menu. See the +documentation for the relevant operating system.

Installing Without a Bootloader

While you can opt to install Mageia without a bootloader (see section 2.1 +Advanced), this is not recommended unless you absolutely know what you are +doing, as without some form of bootloader your operating system will be +unable to start.

Wijzig een opstartmenu-ingang of voeg er een toe

To do this you need to manually edit /boot/grub2/custom.cfg or use the +software grub-customizer tool instead +(available in the Mageia repositories).

Opmerking

For more information, see: https://wiki.mageia.org/en/Grub2-efi_and_Mageia

Configuration Summary

DrakX presents a proposal for the configuration of your system depending on +the choices you made and on the hardware detected. You can check the +settings here and change them if you want by pressing +Configure.

Opmerking

As a general rule, it is recommended that you accept the default settings +unless:

  • Het is bekend dat problemen kunnen optreden als u gebruikt maakt van de +standaardinstelling

  • de standaardinstelling is al geprobeerd en mislukt

  • some other factor mentioned in the detailed sections below is an issue

Systeeminstellingen

  • Timezone

    DrakX selects a timezone for you, depending on your preferred language. You +can change it if needed. See also Configure Timezone

  • Country / Region

    If the selected country is wrong, it is very important that you correct the +setting. See Select Country

  • Bootloader

    DrakX proposal for the bootloader setting

    Do not change anything, unless you know how to configure GRUB2. For more +information, see Bootloader

  • User management

    You can add extra users here. They will each be allocated their own +/home directories.

  • Services

    System services refer to those small programs which run in the background +(daemons). This tool allows you to enable or disable certain processes.

    You should check carefully before changing anything here - a mistake may +prevent your computer from operating correctly. For more information, see +Configure Services

Apparatuurinstellingen

  • Keyboard

    Configure your keyboard layout according to your location, language and type +of keyboard.

    Opmerking

    Als u merkt dat de toetsenbordindeling verkeerd is en u wilt dit veranderen, +hou dan in gedachten dat uw wachtwoorden ook veranderen.

  • Mouse

    Hier kunt u ook andere aanwijsapparaten toevoegen of configureren, zoals +trackballs and touchpads.

  • Sound card

    The installer will use the default driver if one is available.

    If there is no actual default driver for your sound card, there may be other +possible alternative drivers available to choose from. If this is the case, +but you think the installer has not made the most appropriate choice, you +can click on Advanced to manually specify a driver.

  • Graphical interface

    This section allows you to configure your graphics card(s) and displays. For +more information, see de paragraaf “Configuratie van grafische kaart en monitor”

Netwerk en internetinstellingen

  • Network

    You can configure your network here, but for network cards with non-free +drivers it is better to do that after reboot, using the Mageia Control +Center, if you have not yet enabled the Nonfree media +repositories.

    Waarschuwing

    When you add a network card, do not forget to set your firewall to monitor +that interface as well.

  • Proxies

    A Proxy Server acts as an intermediary between your computer and the wider +Internet. This section allows you to configure your computer to utilize a +proxy service.

    You may need to consult your systems administrator to obtain the parameters +you need to enter here.

Beveiliging

  • Security Level

    The Security level for your computer, in most cases the default setting +(Standard) is adequate for general use. Select the option which best suits +your usage.

  • Firewall

    The firewall allows you to manage which network connections are allowed on +your computer. The safe and secure default is to allow ZERO inbound +connections. This does not stop you connecting outbound and using your +computer normally.

    Please be aware that the Internet is a high risk network where there are +continuous attempts to probe and attack systems. Even seemingly +“safe” connections such as ICMP (for ping) have been used as +covert data channels for exfiltrating data by malicious persons.

    For more information, see Firewall.

    Waarschuwing

    Bear in mind that allowing everything (no firewall) may +be very risky.

Locale

Configureer uw tijdzone

  • Choose your timezone by choosing your country, or a city close to you in the +same timezone.

In the next screen you can choose to set your hardware clock to local time +or to GMT, also known as UTC.

Opmerking

Als u meer dan één besturingssysteem op uw computer heeft, zorg dan dat ze +allemaal op lokale tijd ingesteld staan, of op UTC/GMT.

Selecteer uw land

  • Select your country or region. This is important for all kinds of settings, +like the currency and wireless regulatory domain. Setting the wrong country +can lead to being unable to use a Wireless network.

  • If your country isn't in the list, click the Other +Countries option and choose your country / region there.

Opmerking

If your country is only in the Other Countries list, +after clicking OK it may seem that a country from the +main list was chosen. Despite this, DrakX will actually apply your choice.

Invoermethode

In the Other Countries screen you can also select an +input method (at the bottom of the list). Input methods allow users to input +multilingual characters (Chinese, Japanese, Korean, etc). IBus is the +default input method, so users should not need to configure it +manually. Other input methods (SCIM, GCIN, HIME, etc) also provide similar +functions and can be installed if you added HTTP/FTP media before package +selection.

Opmerking

If you missed the input method setup during installation, you can access it +post-install via Configure your Computer → System, or by running +localedrake as root.

Configureer uw diensten

Here you can choose which services should start when you boot your system.

  • Click on a triangle to expand a group to all the relevant services. The +settings DrakX chose are usually good.

  • Als u op een service klikt, ziet u er wat informatie over in het info-vak +beneden.

Verander alleen iets als u heel goed weet wat u doet.

Muiskeuze

Als u niet gelukkig bent met hoe uw muis reageert, kunt u hier een andere +kiezen.

Usually, Universal → Any PS/2 and +USB mice is a good choice.

Select Universal → Force +evdev to configure the buttons that do not work +on a mouse with six or more buttons.

Geluidsconfiguratie

This screen shows the details of the sound card driver chosen for you by the +installer, and this driver should work without problems.

However, if you encounter any issues post-install, then run +draksound or start this tool via Mageia Control Center → Hardware → Sound Configuration. Then, in the +draksound or Sound Configuration +screen, click on Troubleshooting to find useful advice +about how to solve the problem.

Geavanceerd

If there is no actual default driver for your sound card, there may be other +possible alternative drivers available to choose from. If this is the case, +but you think the installer has not made the most appropriate choice, you +can click on Advanced to manually specify a driver.

Beveiligingsniveau

Please choose the desired security level

Standard is the default, and recommended setting for +the average user.

Secure will create a highly protected system - for +instance if the system is to be used as a public server.

Security Administrator

This item allows you to configure an email address to which the system will +send security alert messages when it detects situations +which require notification to a system administrator.

A good, and easy-to-implement, choice is to enter <user>@localhost - +where <user> is the login name of the user to receive these messages.

Opmerking

The system sends such messages as Unix Mailspool +messages, not as "ordinary" SMTP mail: this user must therefore +be configured for receiving such mail!

It will always be possible to adjust your security settings post-install in +the Security section of the Mageia Control Center.

Firewall

This section allows you to configure some simple firewall rules: they +determine which type of message from the Internet will be accepted by the +target system. This, in turn, allows the corresponding services on the +system to be accessible from the Internet.

In the default setting (no button is checked), no service of the system is +accessible from the network. The Everything (no +firewall) option enables access to all services of the machine - +an option that does not make much sense in the context of the installer +since it would create a totally unprotected system. Its veritable use is in +the context of the Mageia Control Center (which uses the same GUI layout) +for temporarily disabling the entire set of firewall rules for testing and +debugging purposes.

All other options are more or less self-explanatory. As an example, you will +enable the CUPS server if you want printers on your machine to be accessible +from the network.

Geavanceerd

The Advanced option opens a window where you can enable +a series of services by typing a list of “couples” (blank +separated)

<poort-nummer>/<protocol>

- <poort-nummer>Is de waarde van + de poort die is toegewezen aan de dienst die u wilt inschakelen +(bijvoorbeeld 873 voor de RSYNC-service) zoals gedefinieerd in +RFC-433;
- <protocol>is één van TCP of +UDP - Het internetprotocol dat door de dienst wordt +gebruikt.

Bijvoorbeeld, de vermelding voor het verlenen van toegang tot de +RSYNC-dienst is dus 873/tcp.

Als een dienst is geïmplementeerd om beide protocollen te gebruiken, dan +specificeert u 2 koppels voor dezelfde poort.

Updates

Since this version of Mageia was released, some packages will have been +updated or improved.

  • Select Yes if you wish to download and install them

  • Select No if you don't want to do this now, or if you +aren't connected to the Internet

  • Press Next to continue

Gefeliciteerd

You have finished installing and configuring Mageia and it is now safe to +remove the installation medium and reboot your computer.

After rebooting, you can use the bootloader screen to choose which operating +system to start (if there are more than one on your computer).

Als u de instellingen voor de opstartlader niet aangepast heeft, wordt +Mageia automatisch geselecteerd en gestart.

Veel plezier!

Visit www.mageia.org/en/ +if you have any questions or want to contribute to Mageia

Mageia deïnstalleren

If Mageia didn't convince you or you can't install it correctly - in short +you want get rid of it - that is your right and Mageia also gives you the +possibility to uninstall. This is not true for every operating system.

After backing up your data, reboot your Mageia installation DVD and select +Rescue system, then Restore Windows boot +loader. At the next boot, you will only have Windows, with no +option to choose your Mageia operating system.

In Windows, to recover the space used by Mageia partitions: click on +Start → Control +Panel → Administrative Tools → Computer Management → Storage → Disk +Management. You will recognise a Mageia +partition because they are labeled Unknown, and also by +their size and place on the disk. Right-click on each of these partitions +and select Delete to free up the space.

If you are using Windows XP, you can create a new partition and format it +(FAT32 or NTFS). It will then get a partition letter.

If you have Vista or 7, you have one more possibility, you can extend the +existing partition that is at the left of the freed space. There are other +partitioning tools that can be used, such as gparted, available for both Windows and Linux. As +always, when changing partitions, be very careful to back up anything +important to you.

© Mageia
CC BY-SA 3.0
Uploaded on 11/03/2021
Terug   
 Begin 
loading table of contents...
diff --git a/netinstall/8/nl/content/nwSearchFnt.js b/netinstall/8/nl/content/nwSearchFnt.js new file mode 100644 index 00000000..13327867 --- /dev/null +++ b/netinstall/8/nl/content/nwSearchFnt.js @@ -0,0 +1,524 @@ +/*---------------------------------------------------------------------------- + * JavaScript for webhelp search + *---------------------------------------------------------------------------- + This file is part of the webhelpsearch plugin for DocBook WebHelp + Copyright (c) 2007-2008 NexWave Solutions All Rights Reserved. + www.nexwave.biz Nadege Quaine + http://kasunbg.blogspot.com/ Kasun Gajasinghe + */ + +//string initialization +var htmlfileList = "htmlFileList.js"; +var htmlfileinfoList = "htmlFileInfoList.js"; +var useCJKTokenizing = false; + +/* Cette fonction verifie la validite de la recherche entrre par l utilisateur */ +function Verifie(ditaSearch_Form) { + + // Check browser compatibitily + if (navigator.userAgent.indexOf("Konquerer") > -1) { + + alert(txt_browser_not_supported); + return; + } + + + var expressionInput = document.ditaSearch_Form.textToSearch.value; + //Set a cookie to store the searched keywords + $.cookie('textToSearch', expressionInput); + + + if (expressionInput.length < 1) { + + // expression is invalid + alert(txt_enter_at_least_1_char); + // reactive la fenetre de search (utile car cadres) + document.ditaSearch_Form.textToSearch.focus(); + } + else { + + // Effectuer la recherche + Effectuer_recherche(expressionInput); + + // reactive la fenetre de search (utile car cadres) + document.ditaSearch_Form.textToSearch.focus(); + } +} + +var stemQueryMap = new Array(); // A hashtable which maps stems to query words + +/* This function parses the search expression, loads the indices and displays the results*/ +function Effectuer_recherche(expressionInput) { + + /* Display a waiting message */ + //DisplayWaitingMessage(); + + /*data initialisation*/ + var searchFor = ""; // expression en lowercase et sans les caracte res speciaux + //w = new Object(); // hashtable, key=word, value = list of the index of the html files + scriptLetterTab = new Scriptfirstchar(); // Array containing the first letter of each word to look for + var wordsList = new Array(); // Array with the words to look for + var finalWordsList = new Array(); // Array with the words to look for after removing spaces + var linkTab = new Array(); + var fileAndWordList = new Array(); + var txt_wordsnotfound = ""; + + + /*nqu: expressionInput, la recherche est lower cased, plus remplacement des char speciaux*/ + searchFor = expressionInput.toLowerCase().replace(/<\//g, "_st_").replace(/\$_/g, "_di_").replace(/\.|%2C|%3B|%21|%3A|@|\/|\*/g, " ").replace(/(%20)+/g, " ").replace(/_st_/g, "= 0; i--) { + if (fileAndWordList[i] != undefined) { + linkTab.push("

" + txt_results_for + " " + "" + fileAndWordList[i][0].motslisteDisplay + "" + "

"); + + linkTab.push(""); + } + } + } + + var results = ""; + if (linkTab.length > 0) { + /*writeln ("

" + txt_results_for + " " + "" + cleanwordsList + "" + "
"+"

");*/ + results = "

"; + //write("