From fe64576f1dca9f8f728cd7063d49d274fb7d5ab3 Mon Sep 17 00:00:00 2001 From: filip Date: Fri, 14 Jul 2017 20:32:19 +0200 Subject: Adding or refreshing mcc in sq --- mcc/6/sq/content/MageiaUpdate.html | 47 ++ mcc/6/sq/content/XFdrake.html | 78 ++ mcc/6/sq/content/diskdrake--dav.html | 58 ++ mcc/6/sq/content/diskdrake--fileshare.html | 61 ++ mcc/6/sq/content/diskdrake--nfs.html | 50 ++ mcc/6/sq/content/diskdrake--removable.html | 45 ++ mcc/6/sq/content/diskdrake--smb.html | 53 ++ mcc/6/sq/content/draft.png | Bin 0 -> 16150 bytes mcc/6/sq/content/drak3d.html | 56 ++ mcc/6/sq/content/drakauth.html | 39 + mcc/6/sq/content/drakautologin.html | 49 ++ mcc/6/sq/content/drakboot.html | 96 +++ mcc/6/sq/content/drakbug.html | 43 ++ mcc/6/sq/content/drakbug_report.html | 47 ++ mcc/6/sq/content/drakclock.html | 54 ++ mcc/6/sq/content/drakconnect--del.html | 38 + mcc/6/sq/content/drakconnect.html | 137 ++++ mcc/6/sq/content/drakconsole.html | 38 + mcc/6/sq/content/drakdisk.html | 56 ++ mcc/6/sq/content/drakedm.html | 40 + mcc/6/sq/content/drakfirewall.html | 60 ++ mcc/6/sq/content/drakfont.html | 48 ++ mcc/6/sq/content/drakguard.html | 70 ++ mcc/6/sq/content/drakgw.html | 67 ++ mcc/6/sq/content/drakhosts.html | 43 ++ mcc/6/sq/content/drakinvictus.html | 38 + mcc/6/sq/content/draknetcenter.html | 87 +++ mcc/6/sq/content/draknetprofile.html | 38 + mcc/6/sq/content/draknfs.html | 68 ++ mcc/6/sq/content/drakproxy.html | 45 ++ mcc/6/sq/content/drakrpm-edit-media.html | 95 +++ mcc/6/sq/content/draksambashare.html | 65 ++ mcc/6/sq/content/draksec.html | 42 ++ mcc/6/sq/content/draksnapshot-config.html | 54 ++ mcc/6/sq/content/draksound.html | 47 ++ mcc/6/sq/content/drakups.html | 38 + mcc/6/sq/content/drakvpn.html | 47 ++ mcc/6/sq/content/drakwizard_apache2.html | 60 ++ mcc/6/sq/content/drakwizard_bind.html | 38 + mcc/6/sq/content/drakwizard_dhcp.html | 52 ++ mcc/6/sq/content/drakwizard_ntp.html | 51 ++ mcc/6/sq/content/drakwizard_proftpd.html | 60 ++ mcc/6/sq/content/drakwizard_squid.html | 50 ++ mcc/6/sq/content/drakwizard_sshd.html | 72 ++ mcc/6/sq/content/drakxservices.html | 38 + mcc/6/sq/content/favicon.png | Bin 0 -> 1184 bytes mcc/6/sq/content/harddrake2.html | 52 ++ mcc/6/sq/content/images/drakgw-net.png | Bin 0 -> 63848 bytes .../content/images/draknetcenterEthernet-off.png | Bin 0 -> 1468 bytes .../sq/content/images/draknetcenterEthernet-on.png | Bin 0 -> 1396 bytes .../content/images/draknetcenterWireless-off.png | Bin 0 -> 922 bytes .../sq/content/images/draknetcenterWireless-on.png | Bin 0 -> 934 bytes mcc/6/sq/content/images/rpmdrake2.png | Bin 0 -> 1008 bytes mcc/6/sq/content/images/rpmdrake3.png | Bin 0 -> 893 bytes mcc/6/sq/content/images/rpmdrake4.png | Bin 0 -> 869 bytes mcc/6/sq/content/images/rpmdrake5.png | Bin 0 -> 1298 bytes mcc/6/sq/content/images/rpmdrake6.png | Bin 0 -> 974 bytes mcc/6/sq/content/index.html | 39 + mcc/6/sq/content/keyboarddrake.html | 43 ++ mcc/6/sq/content/localedrake.html | 49 ++ mcc/6/sq/content/logdrake.html | 61 ++ mcc/6/sq/content/lsnetdrake.html | 40 + mcc/6/sq/content/lspcidrake.html | 40 + mcc/6/sq/content/mageia-2013-200p.png | Bin 0 -> 6473 bytes mcc/6/sq/content/main.js | 179 +++++ mcc/6/sq/content/mcc-boot.html | 35 + mcc/6/sq/content/mcc-hardware.html | 38 + mcc/6/sq/content/mcc-intro.html | 40 + mcc/6/sq/content/mcc-localdisks.html | 35 + mcc/6/sq/content/mcc-network.html | 35 + mcc/6/sq/content/mcc-networkservices.html | 37 + mcc/6/sq/content/mcc-networksharing.html | 36 + mcc/6/sq/content/mcc-security.html | 36 + mcc/6/sq/content/mcc-sharing.html | 37 + mcc/6/sq/content/mcc-system.html | 36 + mcc/6/sq/content/mgaapplet-config.html | 42 ++ mcc/6/sq/content/mousedrake.html | 41 + mcc/6/sq/content/msecgui.html | 148 ++++ mcc/6/sq/content/nwSearchFnt.js | 524 +++++++++++++ mcc/6/sq/content/otherMageiaTools.html | 37 + mcc/6/sq/content/rpmdrake.html | 90 +++ mcc/6/sq/content/scannerdrake.html | 83 +++ mcc/6/sq/content/search/default.props | 1 + mcc/6/sq/content/search/en-us.props | 45 ++ mcc/6/sq/content/search/es-es.props | 179 +++++ mcc/6/sq/content/search/htmlFileInfoList.js | 71 ++ mcc/6/sq/content/search/htmlFileList.js | 72 ++ mcc/6/sq/content/search/index-1.js | 828 +++++++++++++++++++++ mcc/6/sq/content/search/index-2.js | 827 ++++++++++++++++++++ mcc/6/sq/content/search/index-3.js | 823 ++++++++++++++++++++ mcc/6/sq/content/search/ja-jp.props | 1 + mcc/6/sq/content/search/nwSearchFnt.js | 513 +++++++++++++ mcc/6/sq/content/search/punctuation.props | 31 + mcc/6/sq/content/search/stemmers/de_stemmer.js | 247 ++++++ mcc/6/sq/content/search/stemmers/en_stemmer.js | 187 +++++ mcc/6/sq/content/search/stemmers/fr_stemmer.js | 299 ++++++++ mcc/6/sq/content/software-management.html | 37 + mcc/6/sq/content/system-config-printer.html | 146 ++++ mcc/6/sq/content/transfugdrake.html | 65 ++ mcc/6/sq/content/userdrake.html | 72 ++ mcc/6/sq/content/webhelp-custom.css | 229 ++++++ mcc/6/sq/content/webhelp-default.css | 92 +++ mcc/6/sq/index.html | 15 + 103 files changed, 9071 insertions(+) create mode 100644 mcc/6/sq/content/MageiaUpdate.html create mode 100644 mcc/6/sq/content/XFdrake.html create mode 100644 mcc/6/sq/content/diskdrake--dav.html create mode 100644 mcc/6/sq/content/diskdrake--fileshare.html create mode 100644 mcc/6/sq/content/diskdrake--nfs.html create mode 100644 mcc/6/sq/content/diskdrake--removable.html create mode 100644 mcc/6/sq/content/diskdrake--smb.html create mode 100644 mcc/6/sq/content/draft.png create mode 100644 mcc/6/sq/content/drak3d.html create mode 100644 mcc/6/sq/content/drakauth.html create mode 100644 mcc/6/sq/content/drakautologin.html create mode 100644 mcc/6/sq/content/drakboot.html create mode 100644 mcc/6/sq/content/drakbug.html create mode 100644 mcc/6/sq/content/drakbug_report.html create mode 100644 mcc/6/sq/content/drakclock.html create mode 100644 mcc/6/sq/content/drakconnect--del.html create mode 100644 mcc/6/sq/content/drakconnect.html create mode 100644 mcc/6/sq/content/drakconsole.html create mode 100644 mcc/6/sq/content/drakdisk.html create mode 100644 mcc/6/sq/content/drakedm.html create mode 100644 mcc/6/sq/content/drakfirewall.html create mode 100644 mcc/6/sq/content/drakfont.html create mode 100644 mcc/6/sq/content/drakguard.html create mode 100644 mcc/6/sq/content/drakgw.html create mode 100644 mcc/6/sq/content/drakhosts.html create mode 100644 mcc/6/sq/content/drakinvictus.html create mode 100644 mcc/6/sq/content/draknetcenter.html create mode 100644 mcc/6/sq/content/draknetprofile.html create mode 100644 mcc/6/sq/content/draknfs.html create mode 100644 mcc/6/sq/content/drakproxy.html create mode 100644 mcc/6/sq/content/drakrpm-edit-media.html create mode 100644 mcc/6/sq/content/draksambashare.html create mode 100644 mcc/6/sq/content/draksec.html create mode 100644 mcc/6/sq/content/draksnapshot-config.html create mode 100644 mcc/6/sq/content/draksound.html create mode 100644 mcc/6/sq/content/drakups.html create mode 100644 mcc/6/sq/content/drakvpn.html create mode 100644 mcc/6/sq/content/drakwizard_apache2.html create mode 100644 mcc/6/sq/content/drakwizard_bind.html create mode 100644 mcc/6/sq/content/drakwizard_dhcp.html create mode 100644 mcc/6/sq/content/drakwizard_ntp.html create mode 100644 mcc/6/sq/content/drakwizard_proftpd.html create mode 100644 mcc/6/sq/content/drakwizard_squid.html create mode 100644 mcc/6/sq/content/drakwizard_sshd.html create mode 100644 mcc/6/sq/content/drakxservices.html create mode 100644 mcc/6/sq/content/favicon.png create mode 100644 mcc/6/sq/content/harddrake2.html create mode 100644 mcc/6/sq/content/images/drakgw-net.png create mode 100644 mcc/6/sq/content/images/draknetcenterEthernet-off.png create mode 100644 mcc/6/sq/content/images/draknetcenterEthernet-on.png create mode 100644 mcc/6/sq/content/images/draknetcenterWireless-off.png create mode 100644 mcc/6/sq/content/images/draknetcenterWireless-on.png create mode 100644 mcc/6/sq/content/images/rpmdrake2.png create mode 100644 mcc/6/sq/content/images/rpmdrake3.png create mode 100644 mcc/6/sq/content/images/rpmdrake4.png create mode 100644 mcc/6/sq/content/images/rpmdrake5.png create mode 100644 mcc/6/sq/content/images/rpmdrake6.png create mode 100644 mcc/6/sq/content/index.html create mode 100644 mcc/6/sq/content/keyboarddrake.html create mode 100644 mcc/6/sq/content/localedrake.html create mode 100644 mcc/6/sq/content/logdrake.html create mode 100644 mcc/6/sq/content/lsnetdrake.html create mode 100644 mcc/6/sq/content/lspcidrake.html create mode 100644 mcc/6/sq/content/mageia-2013-200p.png create mode 100644 mcc/6/sq/content/main.js create mode 100644 mcc/6/sq/content/mcc-boot.html create mode 100644 mcc/6/sq/content/mcc-hardware.html create mode 100644 mcc/6/sq/content/mcc-intro.html create mode 100644 mcc/6/sq/content/mcc-localdisks.html create mode 100644 mcc/6/sq/content/mcc-network.html create mode 100644 mcc/6/sq/content/mcc-networkservices.html create mode 100644 mcc/6/sq/content/mcc-networksharing.html create mode 100644 mcc/6/sq/content/mcc-security.html create mode 100644 mcc/6/sq/content/mcc-sharing.html create mode 100644 mcc/6/sq/content/mcc-system.html create mode 100644 mcc/6/sq/content/mgaapplet-config.html create mode 100644 mcc/6/sq/content/mousedrake.html create mode 100644 mcc/6/sq/content/msecgui.html create mode 100644 mcc/6/sq/content/nwSearchFnt.js create mode 100644 mcc/6/sq/content/otherMageiaTools.html create mode 100644 mcc/6/sq/content/rpmdrake.html create mode 100644 mcc/6/sq/content/scannerdrake.html create mode 100644 mcc/6/sq/content/search/default.props create mode 100644 mcc/6/sq/content/search/en-us.props create mode 100644 mcc/6/sq/content/search/es-es.props create mode 100644 mcc/6/sq/content/search/htmlFileInfoList.js create mode 100644 mcc/6/sq/content/search/htmlFileList.js create mode 100644 mcc/6/sq/content/search/index-1.js create mode 100644 mcc/6/sq/content/search/index-2.js create mode 100644 mcc/6/sq/content/search/index-3.js create mode 100644 mcc/6/sq/content/search/ja-jp.props create mode 100644 mcc/6/sq/content/search/nwSearchFnt.js create mode 100644 mcc/6/sq/content/search/punctuation.props create mode 100644 mcc/6/sq/content/search/stemmers/de_stemmer.js create mode 100644 mcc/6/sq/content/search/stemmers/en_stemmer.js create mode 100644 mcc/6/sq/content/search/stemmers/fr_stemmer.js create mode 100644 mcc/6/sq/content/software-management.html create mode 100644 mcc/6/sq/content/system-config-printer.html create mode 100644 mcc/6/sq/content/transfugdrake.html create mode 100644 mcc/6/sq/content/userdrake.html create mode 100644 mcc/6/sq/content/webhelp-custom.css create mode 100644 mcc/6/sq/content/webhelp-default.css create mode 100644 mcc/6/sq/index.html (limited to 'mcc/6') diff --git a/mcc/6/sq/content/MageiaUpdate.html b/mcc/6/sq/content/MageiaUpdate.html new file mode 100644 index 00000000..792d103c --- /dev/null +++ b/mcc/6/sq/content/MageiaUpdate.html @@ -0,0 +1,47 @@ + + + + + Software Packages Update

Software Packages Update

MageiaUpdate or drakrpm-update

This tool[2] is present in the Mageia +Control Center under the tab Software +management.

Shënim

To work, MageiaUpdate needs the repositories to be configured with +drakrpm-editmedia with some media checked as updates. If they are not, you +are prompted to do so.

As soon as this tool is launched, it scans the installed packages and lists +those with an update available in the repositories. They are all selected by +default to be automatically downloaded and installed. Click on the +Update button to start the process.

By clicking on a package, more information is displayed in the lower half of +the window. The print > before a title +means you can click to drop down a text.

Shënim

When updates are available, an applet in the system tray warns you by +displaying this red icon +. Just click and enter the user password to update the system alike.


[2] You can start this tool from the command line, by typing MageiaUpdate or drakrpm-update as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/XFdrake.html b/mcc/6/sq/content/XFdrake.html new file mode 100644 index 00000000..7e0e0732 --- /dev/null +++ b/mcc/6/sq/content/XFdrake.html @@ -0,0 +1,78 @@ + + + + + Ndërto grafikën e serverit

Ndërto grafikën e serverit

XFdrake

This tool is present in the Mageia Control Center under the tab Hardware. Select Set up the +graphical server. [14]

Butonat ju lejojnë për të ndryshuar konfigurimin grafik.

Karta grafike:

Karta grafike zbuluar aktualisht shfaqet dhe përputhet me serverin e +konfiguruar. Kliko në këtë buton për të ndryshuar në një tjetër server, për +shembull një me një drejtues të pronarit.

The available servers are sorted under Vendor by +manufacturer in alphabetical order and then by model also in alphabetical +order. The free drivers are sorted by alphabetical order under +Xorg.

Shënim

In case of problems, Xorg - Vesa will work with most +graphic cards and give you time to find and install the right driver while +in your Desktop Environment.

If even Vesa doesn't work, choose Xorg - +fbdev, which is used while installing +Mageia, but doesn't allow you to change resolution or refresh rates.

If you made your choice for a free driver, you may be asked if you want to +use a proprietary driver instead with more features (3D effects for +example).

Monitor:

In the same way as above, the monitor currently detected is displayed and +you can click on the button to change to another one. If the desired monitor +isn't in the Vendor list, choose in the +Generic list a monitor with the same features.

Rezolucion:

Ky buton mundëson zgjedhjen e rezolucionit (numrin e pixels) dhe thellësinë +ngjyra (numri i ngjyrave). Ajo tregon këtë në ekran:

When you change the color depth, a +multi-colored bar will appear next to the second button and show a preview +of what the selected color depth looks like.

Butoni i parë tregon aktualisht rezolucionin, klikoni për të ndryshuar për +një tjetër. Lista jep të gjitha zgjedhjet e mundshme në bazë të kartës +grafike dhe monitorit, është e mundur për të klikoni mbi +Tjerë për të vendosur rezolucione të tjera, por të keni +parasysh se ju mund të dëmtoni monitoruar tuaj ose të zgjidhni një mjedis të +pakëndshme.

Butoni i dytë tregon thellësinë aktuale të ngjyrave, klikoni për të +ndryshuar këtë për një tjetër.

Shënim

Në varësi të rezolucionet së zgjedhur, ajo mund të jetë e nevojshme për të +dal dhe rifilluar mjedisin grafik për cilësimet të hyjnë në fuqi.

Test:

Pasi konfigurimi është bërë, ajo është e rekomanduar për të bërë një test +para se të klikoni mbi DAKORD sepse është më e lehtë të modifikon cilësimet +tani sesa më vonë në qoftë se mjedisi grafik nuk punon.

Shënim

In case of a non working graphical environment, type Alt+Ctrl+F2 to open a +text environment, connect as root and type XFdrake (with the caps) to to use +XFdrake's text version.

Nëse testi dështon, thjesht prisni deri në fund, nëse punon por nuk +deshironi të ndryshoni, kliko në Jo, nëse gjithçka +është mirë, kliko në OK.

Opsione:

  1. Global options: If Disable +Ctrl-Alt-Backspace is checked, it will no longer be possible to +restart X server using Ctrl+Alt+Backspace keys.

  2. Graphic card options: Allows you to enable or disable +three specific features depending on the graphic card.

  3. Graphical interface at startup: Most of the time, +Automatically start the graphical interface (Xorg) upon +booting is checked to make the boot switch to graphical mode, it +may be unchecked for a server.

Pasi të klikoni në butonin Dil, sistemi do ju kërkoj +ta konfirmoni. Ka ende kohë për të anuluar çdo gjë dhe për të mbajtur +konfigurimin e mëparshëm, ose për të pranuar. Në këtë rast, ju duhet të +shkëputeni dhe rilidheni për të aktivizuar konfigurimin e ri.


[14] You can start this tool from the command line, by typing +XFdrake as normal user or drakx11 +as root. Mind the capital letters.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/diskdrake--dav.html b/mcc/6/sq/content/diskdrake--dav.html new file mode 100644 index 00000000..d9f5a94d --- /dev/null +++ b/mcc/6/sq/content/diskdrake--dav.html @@ -0,0 +1,58 @@ + + + + + Hyrje në shpërndarjen e drejtuesve dhe skedarëve WebDAV

Hyrje në shpërndarjen e drejtuesve dhe skedarëve WebDAV

diskdrake --dav

This tool[39] is found in the Mageia +Control Center, under the Network Sharing tab, labeled Configure +WebDAV shares.

Paraqitje

WebDAV është +një protokoll që lejon për të montuar skedarin e një web serveri në nivel +lokal, në mënyrë që të duket si një skedarë lokale. Është e nevojshme që +kompjuteri në distance të fillojnjë server WebDAV. Ky nuk është qëllimi i +kësaj vegle për të konfiguruar server WebDAV.

Krijimi një hyrjes të re

Ekran i parë i mjetit tregon shënimet hyrëse të konfiguruara tashmë, nëse +ka, dhe një E Re buton. Përdorini për të krijuar një +hyrje të re. Vendos server URL në fushën e ekranit të ri.

Pastaj ju merrni një ekran me butonat e radios për të zgjedhur disa +veprime. Vazhdo me veprimin Pikë montuese duke +klikuar Dakord pas zgjedhjes butonit radio, si +Server është konfiguruar tashmë. Ju mund megjithatë +të korrigjoni atë, nëse është e nevojshme.

Përmbajtja e skedarit në distancë do të jetë i mundshëm përmes kësaj pike +montimi.

Në hapin e ardhshëm, jepni emrin tuaj të përdoruesit dhe fjalëkalimin. Nëse +keni nevojë për disa opsione të tjera, ju mund të jepni atyre në ekranin +avancuar.

The option Mount allows you to mount immediately the +access.

After you accepted the configuration with the radio button +Done, the first screen is displayed again and your +new mount point is listed. After you choose Quit, you +are asked whether or not to save the modifications in +/etc/fstab. Choose this option if you want that the +remote directory is available at each boot. If your configuration is for +one-time usage, do not save it.


[39] You can start this tool from the command line, by typing diskdrake --dav as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/diskdrake--fileshare.html b/mcc/6/sq/content/diskdrake--fileshare.html new file mode 100644 index 00000000..7d5888f2 --- /dev/null +++ b/mcc/6/sq/content/diskdrake--fileshare.html @@ -0,0 +1,61 @@ + + + + + Shpërndaj ndarjet e hardiskut tuaj

Shpërndaj ndarjet e hardiskut tuaj

diskdrake --fileshare

This simple tool[42] allows you, the +administrator, to allow users to share parts of their own /home +subdirectories with other users of a same local network which may have +computers running either Linux or Windows operating system.

It is found in the Mageia Control Center, under the Local Disk tab, labelled +"Share your hard disk partitions".

First, answer the question : "Would you like to allow users to +share some of their directories ?", click on No +sharing if the answer is no for all users, click on +Allow all users for all users and click on +Custom if the answer is no for some users and yes for +the others. In this last case, the users that are authorised to share their +directories must belong to the fileshare group, which is automatically +created by the system. You will be asked about this later.

Click on OK, a second screen appears which asks you +choose between NFS or SMB. +Check NFS if Linux is the only operating system on +the network, check SMB if the network includes both +Linux and Windows machines and then click on OK. Any +required packages will be installed if necessary.

The configuration is now complete unless the Custom option was chosen. In +this case, an extra screen prompts you to open Userdrake. This tool allows +you to add users authorised to share their directories to the fileshare +group. In the User tab, click on the user to add to the fileshare group, +then on Edit, In the Groups tab. Check the +fileshare group and click on OK. For more information +about Userdrake, see seksioni i quajtur “Përdoruesit dhe grupet”

Shënim

When adding a new user to the fileshare group, you have to disconnect and +reconnect the network for the modifications to be taken into account.

From now on each user belonging to the fileshare group can select in his/her +file manager the directories to be shared, although not all file managers +have this facility.


[42] Ju mund të filloni këtë mjet nga vija e komandës, duke shtypur diskdrake --shpërndaj-dokument si root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/diskdrake--nfs.html b/mcc/6/sq/content/diskdrake--nfs.html new file mode 100644 index 00000000..e81f1184 --- /dev/null +++ b/mcc/6/sq/content/diskdrake--nfs.html @@ -0,0 +1,50 @@ + + + + + Hyrje e shpërndarjes drejtuese dhe skedarëve të NFS

Hyrje e shpërndarjes drejtuese dhe skedarëve të NFS

diskdrake --nfs

.

Paraqitje

This tool[37] allows you to declare some +shared directories to be accessible to all users on the machine. The +protocol used for this is NFS which is available on most Linux or Unix +systems. The shared directory will be thus available directly at +boot. Shared directories can be also accessible directly in a single session +for a user with tools such as file browsers.

Procedurë

Select search servers to obtain a list of servers +which share directories.

Click on the > symbol before the server name to display the list of the +shared directories and select the directory you want to access.

The button Mount point will be available and you have +to specify where to mount the directory.

After choosing the mount point, You can mount it. You can also verify and +change some options with the Options button. After +mounting the directory, you can unmount it with the same button.

On accepting the configuration with the Done button, +a message will displayed, asking "Do you want to save the /etc/fstab +modifications". This will make the directory available at each boot, if the +network is accessible. The new directory is then available in your file +browser, for example in Dolphin.


[37] You can start this tool from the command line, by typing diskdrake --nfs as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/diskdrake--removable.html b/mcc/6/sq/content/diskdrake--removable.html new file mode 100644 index 00000000..37de903c --- /dev/null +++ b/mcc/6/sq/content/diskdrake--removable.html @@ -0,0 +1,45 @@ + + + + + Gdhendësi CD/DVD

Gdhendësi CD/DVD

diskdrake --lëvizshëm

This tool [41]is found under the tab Local +disks in the Mageia Control Center labelled accordingly with your removable +hardware (CD/DVD players and burners and floppy drives only).

Qëllimi i saj është të përcaktojë mënyrën diskun tuaj të lëvizshëm është +ngritur.

At the top of the window there is a short description of your hardware and +the chosen options to mount it. Use the menu on the bottom to change +them. Check the item to be changed and then on the OK +button.

Pikë montuese

Check this box to change the mount point. The default one is /media/cdrom.

Opsione

Many mount options can be chosen here either directly in the list or via the +Advanced submenu. The main are:

përdorues/jopërdorues

user allows an ordinary user (not root) to mount the removable disk, this +option involves noexec, nosuid and nodev. The user who mounted the disk is +the only one who can umount it.


[41] You can start this tool from the command line, by typing diskdrake --removable as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/diskdrake--smb.html b/mcc/6/sq/content/diskdrake--smb.html new file mode 100644 index 00000000..9d1bfcfb --- /dev/null +++ b/mcc/6/sq/content/diskdrake--smb.html @@ -0,0 +1,53 @@ + + + + + Hyrje në shpërndarjen e drejtuesve dhe skedarëve Windows (SMB)

Hyrje në shpërndarjen e drejtuesve dhe skedarëve Windows (SMB)

diskdrake --smb

Paraqitje

This tool[35] allows you to declare which +shared directories to be accessible to all users on the machine. The +protocol used for this is SMB which has been popularized on Windows(R) +systems. The shared directory will be available directly at boot. Shared +directories can be also accessed directly in a single session by a user with +tools such as file browsers.

Before starting the tool, it is a good idea to declare the names of +available servers, for example with seksioni i quajtur “Përcaktimi i pritësit”

Procedurë

Select search servers to obtain a list of servers who +share directories.

Click on the server name and on > before the server name to display the +list of the shared directories and select the directory you want to access.

The Mount point button will become available, you +have to specify where to mount the directory.

After choosing the mount point, it can be mounted with the Mount +button. You can also verify and change some options with the +Options button.

In options, you can specify the user name and the password of those able to +connect to the SMB server. After mounting the directory, you can unmount it +with the same button.

After accepting the configuration with the Done button, a message will ask +"Do you want to save the /etc/fstab modifications". Saving, will allow +directory to made available at each boot, if the network is accessible. The +new directory is then available in your file browser, for example in +dolphin.


[35] You can start this tool from the command line, by typing diskdrake --smb as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/draft.png b/mcc/6/sq/content/draft.png new file mode 100644 index 00000000..59673fe1 Binary files /dev/null and b/mcc/6/sq/content/draft.png differ diff --git a/mcc/6/sq/content/drak3d.html b/mcc/6/sq/content/drak3d.html new file mode 100644 index 00000000..ccf20718 --- /dev/null +++ b/mcc/6/sq/content/drak3d.html @@ -0,0 +1,56 @@ + + + + + 3D Desktop Effects

3D Desktop Effects

drak3d

Paraqitje

This tool[13] lets you manage the 3D +desktop effects on your operating system. 3D effects are turned off by +default.

Si T'ia Fillojmë

To use this tool, you need to have the glxinfo package installed. If the +package is not installed, you will be prompted to do so before drak3d can +start.

After starting drak3d, you will be presented with a menu window. Here you +can choose either No 3D Desktop Effects or +Compiz Fusion. Compiz Fusion is part of a +composite/window manager, which includes hardware-accelerated special +effects for your desktop. Choose Compiz Fusion to turn +it on.

If this is your first time using this program after a clean installation of +Mageia, you will get a warning message telling you which packages need to be +installed in order to use Compiz Fusion. Click on the +Ok button to continue.

Pasi paketat e duhura janë instaluar, ju do të vini re se Compiz Fusion +është zgjedhur në menynë drak3d, por ju duhet të dilni dhe të hyni përsëri +në të qër ndryshimet të hyjnë në fuqi.

After logging back in, Compiz Fusion will be activated. To configure Compiz +Fusion, see the page for the ccsm (CompizConfig Settings Manager) tool.

Zgjidhjeproblemi

Can't See Desktop after Logging in

If after turning on Compiz Fusion you attempt to log back into your desktop +but can't see anything, restart your computer to get back to the log in +screen. Once there, click on the Desktop icon and select drak3d.

When you log in, if your account is listed as an administrator, you will be +prompted for your password again. Otherwise, use the administrator login +with his/her account. Then you can undo any changes that may have caused the +log in problem.


[13] You can start this tool from the command line, by typing drak3d as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakauth.html b/mcc/6/sq/content/drakauth.html new file mode 100644 index 00000000..a96790ca --- /dev/null +++ b/mcc/6/sq/content/drakauth.html @@ -0,0 +1,39 @@ + + + + + Vërtetimi

Vërtetimi

drakauth

This tool[26] enables you to modify the +manner in which you can be recognized as user of the machine or on the net.

By default, information for your authentication is stored in a file on your +computer. Modify it only if your network administrator invites you to do so +and give information about that.


[26] You can start this tool from the command line, by typing drakauth as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakautologin.html b/mcc/6/sq/content/drakautologin.html new file mode 100644 index 00000000..7fb192c9 --- /dev/null +++ b/mcc/6/sq/content/drakautologin.html @@ -0,0 +1,49 @@ + + + + + Konfiguro hyrje automatike për të hyrë automatikisht

Konfiguro hyrje automatike për të hyrë automatikisht

drakautologin

This tool[47] allows you to automatically +login the same user, in her/his desktop environment, without asking for any +password. It's called autologin. This is generally a good idea when there +is only one user like to be using the machine.

It is found under the Boot tab in the +Mageia Control Center labelled "Set up autologin to automatically log in".

Butonat ndërfaqes janë mjaft të dukshme:

Check Launch the graphical environment when your system +starts, if you want X Window System to be executed after the +boot. If not, the system will start in text mode. Nevertheless, it will be +possible to launch the graphic interface manually. This can be done by +launching the command 'startx' or 'systemctl start dm'.

If the first box is checked, two other options are available, check either +No, I don't want autologin, if you want the system to +continue to ask for which user to connect (and password) or check +Yes, I want autologin with this (user, desktop), if +needed. In this case, you also need to supply the Default +username and the Default desktop.


[47] You can start this tool from the command line, by typing drakautologin as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakboot.html b/mcc/6/sq/content/drakboot.html new file mode 100644 index 00000000..7acbb2dc --- /dev/null +++ b/mcc/6/sq/content/drakboot.html @@ -0,0 +1,96 @@ + + + + + Ndërto ndezjen e sistemit

Ndërto ndezjen e sistemit

drakboot

If you are using a UEFI system instead of BIOS, the user interface is +slightly different as the boot device is obviously the EFI system Partition +(ESP).

This tool[48] allows you to configure the +boot options (choice of the bootloader, set a password, the default boot, +etc.)

It is found under the Boot tab in the Mageia Control Center labeled "Set up +boot system".

Paralajmërim

Don't use this tool if you don't know exactly what you are doing. Changing +some settings may prevent your machine from booting again !

In the first part, called Bootloader, it is possible if +using BIOS, to choose which Bootloader to use, Grub, +Grub2 or Lilo, and with a graphical or a text menu. It is just a question +of taste, there are no other consequences. You can also set the +Boot device, don't change anything here unless you +are an expert. The boot device is where the bootloader is installed and any +modification can prevent your machine from booting.

In a UEFI system, the bootloader is Grub2-efi and is +installed in /boot/EFI partition. This FAT32 formatted partition is common +to all operating systems installed.

In the second part, called Main options, you can set +the Delay before booting default image, in +seconds. During this delay, Grub or Lilo will display the list of available +operating systems, prompting you to make your choice. If no selection is +made, the bootloader will boot the default one once the delay elapses.

In the third and last part, called Security, it is +possible to set a password for the bootloader. This means a username and +password will be asked at the boot time to select a booting entry or change +settings. The username is "root" and the password is the one chosen here.

The Advanced button gives some extra options.

Mundëso ACPI:

ACPI (Advanced Configuration and Power Interface) is a standard for the +power management. It can save energy by stopping unused devices, this was +the method used before APM. Check this box if your hardware is ACPI +compatible.

Mundëso SMP:

SMP stands for Symmetric Multi Processors, it's an architecture for +multicore processors.

Shënim

If you have a processor with HyperThreading, Mageia will see it as a dual +processor and enable SMP.

Mundëso APIC dhe Mundëso APIC +lokal:

APIC stands for Advanced Programmable Interrupt Controller. There are two +components in the Intel APIC system, the local APIC (LAPIC) and the I/O +APIC. The latter one routes the interrupts it receives from peripheral buses +to one or more local APICs that are in the processor. It is really useful +for multi-processor systems. Some computers have problems with the APIC +system which can cause freezes or incorrect device detection (error message +"spurious 8259A interrupt: IRQ7"). In this case, disable APIC and/or Local +APIC.

The Next screen differs depending on which boot +loader you chose.

  • You have Grub Legacy or Lilo:

    In this case, you can see the list of all the available entries at boot +time. The default one is asterisked. To change the order of the menu +entries, click on the up or down arrows to move the selected item. If you +click on the Add or Modify +buttons, a new window appears to add a new entry in the bootloader menu or +to modify an existing one. You need to be familiar with Lilo or Grub to be +able to use these tools.

    The Label field is freeform, write here what you want +to be displayed in the menu. It matches the Grub command "title". For +example: Mageia3.

    The Image field contains the kernel name. It matches +the Grub command "kernel". For example /boot/vmlinuz.

    The Root field contains the device name where the +kernel is stored. It matches the Grub command "root". For example (hd0,1).

    The Append field contains the options to be given to +the kernel at boot time.

    If the box Default is checked, Grub will boot this +entry by default.

    In the extra screen called Advanced, it is possible to +choose the Video mode, an initrd +file and a network profile, see seksioni i quajtur “Menaxho profile të ndryshme rrjetit”, in the drop-down lists.

  • You have Grub2 or Grub2-efi (boot loaders used by default respectively in +Legacy mode and UEFI mode):

    In this case, the drop-down list labelled Default +displays all the available entries; click on the one wanted as the default +one.

    The Append field contains the options to be given to +the kernel at boot time.

    If you have other operating systems installed, Mageia attempts to add them +to your Mageia boot menu. If you don't want this behaviour, uncheck the box +Probe Foreign OS

    In the extra screen called Advanced, it is possible to +choose the Video mode. If you don't want a bootable +Mageia, but to chain load it from another OS, check the box Do not +touch ESP or MBR and accept the warning.

    Paralajmërim

    Not installing on ESP or MBR means that the installation is not bootable +unless chain loaded from another OS.

    To set many other parameters, you can use the tool named Grub +Customizer, available in the Mageia repositories (see below).


[48] You can start this tool from the command line, by typing drakboot as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakbug.html b/mcc/6/sq/content/drakbug.html new file mode 100644 index 00000000..cb1765bd --- /dev/null +++ b/mcc/6/sq/content/drakbug.html @@ -0,0 +1,43 @@ + + + + + Mageia Bug Report Tool

Mageia Bug Report Tool

drakbug

Usually, this tool[50] starts automatically +when a Mageia tool crashes. However, it is also possible that, after filing +a bug report, you are asked to start this tool to check some of the +information it gives, and then provide that in that existing bug report.

If a new bug report needs to be filed and you are not used to doing that, +then please read How to +report a bug report properly before clicking on the "Report" button.

In case the bug has already been filed by someone else (the error message +that drakbug gave will be the same, then), it is useful to add a comment to +that existing report that you saw the bug, too.


[50] You can start this tool from the command line, by typing drakbug.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakbug_report.html b/mcc/6/sq/content/drakbug_report.html new file mode 100644 index 00000000..87758e95 --- /dev/null +++ b/mcc/6/sq/content/drakbug_report.html @@ -0,0 +1,47 @@ + + + + + Collect Logs and System Information for Bug Reports

Collect Logs and System Information for Bug Reports

drakbug_report

This tool[51] can only be started and used +on the command line.

It is advised to write the output of this command to a file, for instance by +doing drakbug_report > drakbugreport.txt, +but make sure you have enough disk space first: the file can easily be +several GBs large.

Shënim

The output is far too large to attach to a bug report without first removing +the unneeded parts.

This command collects the following information on your system:

  • lspci

  • pci_devices

  • dmidecode

  • fdisk

  • scsi

  • /sys/bus/scsi/devices

  • lsmod

  • cmdline

  • pcmcia: stab

  • usb

  • Ndarjet

  • cpuinfo

  • syslog

  • Xorg.log

  • monitor_full_edid

  • stage1.log

  • ddebug.log

  • install.log

  • fstab

  • modprobe.conf

  • lilo.conf

  • grub: menu.lst

  • grub: install.sh

  • grub: device.map

  • xorg.conf

  • urpmi.cfg

  • modprobe.preload

  • sysconfig/i18n

  • /proc/iomem

  • /proc/ioport

  • version mageia

  • rpm -qa

  • df

Shënim

At the time this help page was written, the "syslog" part of this command's +output was empty, because this tool had not yet been adjusted to our switch +to systemd. If it is still empty, you can retrieve the "syslog" by doing (as +root) journalctl -a > journalctl.txt. If +you don't have a lot of diskspace, you can, for instance, take the last 5000 +lines of the log instead with: journalctl -a | tail +-n5000 > journalctl5000.txt.


[51] You can start this tool from the command line, by typing drakbug_report as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakclock.html b/mcc/6/sq/content/drakclock.html new file mode 100644 index 00000000..dc5602e0 --- /dev/null +++ b/mcc/6/sq/content/drakclock.html @@ -0,0 +1,54 @@ + + + + + Menaxho datën dhe kohën

Menaxho datën dhe kohën

drakclock

This tool[28] is found under the tab System +in the Mageia Control Center labelled "Manage date and +time". In some desktop environments it is also available by a +right click / Adjust date and Time ... on the clock in the system tray.

It's a very simple tool.

On the upper left part, is the calendar. On +the screenshot above, the date is September (on the upper left), 2012 (on +the upper right), the 2nd (in blue) and it is a Sunday. Select the month +(or year) by clicking on the little arrows on each side of September (or +2012). Select the day by clicking on its number.

On the bottom left is the Network Time +Protocol synchronising, it is possible to have a clock always on +time by synchronising it with a server. Check Enable Network Time +Protocol and choose the closest server.

On the right part is the clock. It's +useless to set the clock if NTP is enabled. Three boxes display hours, +minutes and seconds (15, 28 and 22 on the screenshot). Use the little arrows +to set the clock to the correct time. The format can't be changed here, see +your desktop environment settings for that.

At least, on the bottom right, select your time zone by clicking on the +Change Time Zone button and choosing in the list the +nearest town.

Shënim

Even if it isn't possible to choose a date or time format in this tool, they +will be displayed on your desktop in accordance with the localisation +settings.


[28] You can start this tool from the command line, by typing drakclock as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakconnect--del.html b/mcc/6/sq/content/drakconnect--del.html new file mode 100644 index 00000000..1fd44b3e --- /dev/null +++ b/mcc/6/sq/content/drakconnect--del.html @@ -0,0 +1,38 @@ + + + + + Hiq një Lidhje

Hiq një Lidhje

drakconnect --del

Here, you can delete a network interface[21].

Click on the drop down menu, choose the one you want to remove and then +click next.

You'll see a message that the network interface has been deleted +successfully.


[21] You can also start this tool from the command line, by typing drakconnect --del as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakconnect.html b/mcc/6/sq/content/drakconnect.html new file mode 100644 index 00000000..c8e6afc0 --- /dev/null +++ b/mcc/6/sq/content/drakconnect.html @@ -0,0 +1,137 @@ + + + + + Ndërto një ndërfaqe rrjeti (LAN, ISDN, ADSL, ...)

Ndërto një ndërfaqe rrjeti (LAN, ISDN, ADSL, ...)

drakconnect

Paraqitje

This tool[20] allows to configure much of +local network or Internet access. You have to know some information from +your access provider or your network administrator.

Select the type of connection you want to set, according to which hardware +and provider you have.

A new Wired connection (Ethernet)

  1. The first window lists the interfaces which are available. Select the one +to configure.

  2. At this point, the choice is given between an automatic or a manual IP +address.

  3. IP Automatike

    1. Ethernet/IP settings: you have to select if DNS servers +are declared by the DHCP server or are manually specified, as explained +below. In the last case, the IP address of DNS servers has to be set. The +HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, +the name localhost.localdomain is attributed by default. +The Hostname can also be provided by the DHCP server with the option +Assign host name from DHCP server. Not all DHCP servers +have such a function and if you're setting up your PC to get an IP address +from a domestic ADSL router, it is unlikely.

    2. The advanced button give the opportunity to specify:

      • Search domain (not accessible, as provided by the DHCP server)

      • Klienti DHCP

      • DHCP timeout

      • Get YP server from DHCP (checked by default): specify the NIS server

      • Get NTPD server from DHCP (synchronisation of clocks)

      • the HOSTNAME required by DHCP. Only use this option if the DHCP server +requires the client to specify a hostname before receiving an IP +address. This option is not dealt by some DHCP servers.

    3. After accepting, the last steps which are common to all connection +configurations are explained: seksioni i quajtur “Përfundimi i konfigurimit”

  4. Konfigurimi manual

    1. Ethernet/IP settings: you need to declare what DNS +servers to use. The HOSTNAME of the computer can be specified here. If no +HOSTNAME is specified, the name localhost.localdomain is +attributed by default.

      For a residential network, the IP address usually looks like +192.168.x.x, Netmask is +255.255.255.0, and the Gateway and DNS servers are +available from your service provider's website.

      In advanced settings, you can specified a Search +domain. It would usually be your home domain, i.e. if your +computer is called "splash", and it's full domain name is +"splash.boatanchor.net", the Search Domain would be "boatanchor.net". Unless +you specifically need it, it's ok not to define this setting. Again, +domestic ADSL would not need this setting.

    2. The next steps are exposed at seksioni i quajtur “Përfundimi i konfigurimit”

Një lidhje e re Satelitore (DVB)

This section hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

Një lidhje e re me Kabull modem

  1. The first window lists the interfaces which are available. Select the one +to configure.

  2. At this point, the choice is given between an automatic or a manual IP +address.

  3. You have to specify a authentication method:

    • Asnjë

    • BPALogin (necessary for Telstra). In this case you have to provide User name +and password.

  4. IP Automatike

    1. Cable/IP settings: you have to select if DNS servers +are declared by the DHCP server or are manually specified, as explained +below. In the last case, the IP address of DNS servers has to be set. The +HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, +the name localhost.localdomain is attributed by default. +The Hostname can also be provided by the DHCP server with the option +Assign host name from DHCP server. Not all DHCP servers +have such a function and if you're setting up your PC to get an IP address +from a domestic ADSL router, it is unlikely.

    2. The advanced button give the opportunity to specify:

      • Search domain (not accessible, as provided by the DHCP server)

      • Klienti DHCP

      • DHCP timeout

      • Get YP server from DHCP (checked by default): specify the NIS server

      • Get NTPD server from DHCP (synchronisation of clocks)

      • the HOSTNAME required by DHCP. Only use this option if the DHCP server +requires the client to specify a hostname before receiving an IP +address. This option is not dealt by some DHCP servers.

    3. After accepting, the last steps which are common to all connection +configurations are explained: seksioni i quajtur “Përfundimi i konfigurimit”

  5. Konfigurimi manual

    1. Cable/IP settings: you need to declare what DNS servers +to use. The HOSTNAME of the computer can be specified here. If no HOSTNAME +is specified, the name localhost.localdomain is +attributed by default.

      For a residential network, the IP address usually looks like +192.168.x.x, Netmask is +255.255.255.0, and the Gateway and DNS servers are +available from your service provider's website.

      In advanced settings, you can specified a Search +domain. It would usually be your home domain, i.e. if your +computer is called "splash", and it's full domain name is +"splash.boatanchor.net", the Search Domain would be "boatanchor.net". Unless +you specifically need it, it's ok not to define this setting. Again, +domestic connection would not need this setting.

    2. The next steps are exposed at seksioni i quajtur “Përfundimi i konfigurimit”

A new DSL connection

  1. If the tool detects network interfaces, it offers to select one and to +configure it.

  2. A list of providers is proposed, classified by countries. Select your +provider. If it is not listed, select the option +Unlisted and then enter the options your provider gave.

  3. Select one of the protocols available:

    • DHCP

    • Konfigurimi manual TCP/IP

    • PPP mbi ADSL (PPPoA)

    • PPP mbi Ethernet (PPPoE)

    • Protokolli tunel Pikë për Pikë (PPTP)

  4. Cilësime hyrëse

    • Hyrje Llogarie (emri përdoruesit)

    • Fjalëkalimi llogarisë

    • (Avancuar) Shtegu Virtual ID (VPI)

    • (Avancuar) Qarku Virtual ID (VCI)

  5. The next steps are exposed at seksioni i quajtur “Përfundimi i konfigurimit”

Lidhja e re ISDN

  1. Udhëzuesi pyet cilën pajisje të konfiguroj:

    • Zgjedhje manuale (kartë e brendshme ISDN)

    • Modemi i jashtëm ISDN

  2. Një listë e pjesëve-elektronike propozohet, klasifikuar sipas kategorisë dhe +prodhues. Zgjidhni kartën tuaj.

  3. Select one of the protocols available:

    • Protokolli për pjesën tjetër të botës, me përjashtim të Evropës (DHCP)

    • Protokolli për Evropën (EDSS1)

  4. A list of providers is then offered, classified by countries. Select your +provider. If it is not listed, select the option +Unlisted and then enter the options your provider gave +you. Then it is asked for parameters:

    • Emri i lidhjes

    • Numri i telefonit

    • ID Hyrëse

    • Fjalëkalimi llogarisë

    • Metodë vërtetimi

  5. Pas kësaj, ju duhet të zgjidhni nëse ju merrni adresën IP nga metoda +automatike apo manuale. Në rastin e fundit, specifikoni adresën IP dhe +subnet mask.

  6. Hapi i ardhshëm është që të zgjidhni se si adresa DNS serverët janë të +marra, me metodën automatike apo manuale. Në rastin e konfigurimit manual, +ju duhet të vini:

    • Emri pronës

    • First and second DNS Server

    • Select if the hostname is set from IP. This option is to select only if you +are sure that your provider is configured to accept it.

  7. The next step is to choose how the gateway address is obtained, by automatic +or manual method. In the case of manual configuration, you have to enter the +IP address.

  8. The next steps are exposed at seksioni i quajtur “Përfundimi i konfigurimit”

A new Wireless connection (WiFi)

  1. A first window lists the interfaces which are available and an entry for +Windows driver (ndiswrapper). Select the one to configure. Use ndiswrapper +only if the other configuration methods did not work.

  2. At this step, the choice is given between the different access points that +the card has detected.

  3. Specific parameter for the wireless card are to provide:

    • Operating mode:

      Menaxhuar

      To access to an existing access point (the most frequent).

      Ad-Hoc

      Për të konfiguruar lidhje të drejtpërdrejtë ndërmjet kompjuterëve.

    • Network Name (ESSID)

    • Encryption mode: it depends of how the access point is configured.

      WPA/WPA2

      This encryption mode is to prefer if your hardware allows it.

      WEP

      Some old hardware deals only this encryption method.

    • Çelës enkriptues

      It is generally provided with the hardware which give the access point.

  4. At this step, the choice is given between an automatic IP address or a +manual IP address.

  5. IP Automatike

    1. IP settings: you have to select if DNS servers are +declared by the DHCP server or are manually specified, as explained +below. In the last case, IP address of DNS servers has to be set. The +HOSTNAME of the computer can be specified here. If no HOSTNAME is +specified, the name localhost.localdomain is attributed by default. The +Hostname can also be provided by the DHCP server with the option +Assign host name from DHCP server

    2. The advanced button give the opportunity to specify:

      • Search domain (not accessible, as provided by the DHCP server)

      • Klienti DHCP

      • DHCP timeout

      • Get YP server from DHCP (checked by default): specify the NIS servers

      • Get NTPD server from DHCP (synchronisation of clocks)

      • the HOSTNAME required by DHCP. Only use this option if the DHCP server +requires the client to specify a hostname before receiving an IP +address. This option is not dealt by some DHCP servers.

    3. After accepting the configuration the step, which is common to all +connection configurations, is explained: seksioni i quajtur “Përfundimi i konfigurimit”

  6. Konfigurimi manual

    1. IP settings: you have to declare DNS servers. The +HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, +the name localhost.localdomain is attributed by default.

      For a residential network, the IP address always looks like +192.168.x.x, Netmask is +255.255.255.0, and the Gateway and DNS servers are +available from your providers website.

      In advanced settings, you can specified a Search +domain. It must seem to your hostname without the first name, +before the period.

    2. The next steps are exposed at seksioni i quajtur “Përfundimi i konfigurimit”

A new GPRS/Edge/3G connection

  1. If the tool detects wireless interfaces, it offers to select one and to +configure it.

  2. The PIN is asked. Leave empty if the PIN is not required.

  3. The wizard asks for network. If it is not detected, select the option +Unlisted.

  4. A list of providers is proposed, classified by countries. Select your +provider. If it is not listed, select the option +Unlisted and then enter the options your provider gave.

  5. Provide access settings

    • Access Point Name

    • Hyrje Llogarie (emri përdoruesit)

    • Fjalëkalimi llogarisë

  6. The next steps are exposed at seksioni i quajtur “Përfundimi i konfigurimit”

A new Bluetooth Dial-Up Networking connection

This section hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

A new Analog telephone modem connection (POTS)

  1. Udhëzuesi pyet cilën pajisje të konfiguroj:

    • Zgjedhja manuale

    • Detected hardware, if any.

  2. A list of ports is proposed. Select your port.

  3. If not yet installed, it will be suggested that you install the package +kppp-provider.

  4. A list of providers is proposed, classified by countries. Select your +provider. If it is not listed, select the option +Unlisted and then enter the options your provider +gave. Then it is asked for Dialup options:

    • Emri lidhjes

    • Numri telefonit

    • ID Hyrëse

    • Fjalëkalimi

    • Vërtetimi, zgjedhin midis:

      • PAP/CHAP

      • Skript-bazë

      • PAP

      • Terminali-bazuar

      • CHAP

  5. The next steps are exposed at seksioni i quajtur “Përfundimi i konfigurimit”

Përfundimi i konfigurimit

Në hapin tjetër, ju mund të specifikoni:

  • Lejo përdoruesit për të menaxhuar lidhjen

  • Fillo lidhjen në ndezje

  • Mundëso llogaritjen trafikut

  • Lejo ndërfaqen të kontrollohet nga Menaxheri Rrjetit

  • In the case of a wireless connection, a supplemental box is Allow +access point roaming which give the possibility to switch +automatically between access point according to the signal strength.

With the advanced button, you can specify:

  • Metrit (10 nga parazgjedhja)

  • MTU

  • Rrjet i Prizuar

  • Mundëso tunelin IPv6 në IPv4

The last step allows you to specify if the connection is to start +immediately or not.


[20] You can start this tool from the command line, by typing drakconnect as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakconsole.html b/mcc/6/sq/content/drakconsole.html new file mode 100644 index 00000000..0185a124 --- /dev/null +++ b/mcc/6/sq/content/drakconsole.html @@ -0,0 +1,38 @@ + + + + + Hap panel komandimi si administrator

Hap panel komandimi si administrator

drakconsole

This tool[31] gives you access to a console +which is directly opened as root. We do not think that you need more +information about that.


[31] You can start this tool from the command line, by typing drakconsole as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakdisk.html b/mcc/6/sq/content/drakdisk.html new file mode 100644 index 00000000..a6e89495 --- /dev/null +++ b/mcc/6/sq/content/drakdisk.html @@ -0,0 +1,56 @@ + + + + + Menaxho ndarjet e hardiskut

Menaxho ndarjet e hardiskut

drakdisk or diskdrake

Paralajmërim

This tool[40] is very powerful, a tiny +error or a cat jumping on your keyboard can lead to losing all data on a +partition or even to erasing the entire hard disk. For that reason, you'll +see the screen above on top of the tool screen. Click on +Exit if you're not sure you want to continue.

If you have more than one hard disk, you can switch to the hard disk you +want to work on by selecting the correct tab (sda, sdb, sdc etc).

You can choose from many actions to adjust your hard disk to your +preferences. Wiping an entire hard disk, splitting or merging partitions, +resizing them or changing the filesystem, formatting or viewing what is in a +partition: it is all possible. The Clear +all button at the bottom is to erase the complete +disk, the other buttons become visible on the right after you click on a +partition.

Shënim

If you have an UEFI system, you can see a small partition called "EFI System +Partition" and mounted on /boot/EFI. Never delete it, because it contains +all your different operating systems bootloaders.

Nëse ndarja e zgjedhur është montuar, si në shembullin e mëposhtëm, ju nuk +mund të ndryshoni përmasat , formatoni ose fshini. Për të qenë në gjendje të +bëni atë ndarja duhet të jetë e pa-montuara së pari.

It is only possible to resize a partition on its right side

To change a partition type (change ext3 to ext4 for example) you have to +delete the partition and then re-create it with the new type. The button +Create appears when a disk empty part is +selected

Ju mund të zgjidhni një pikë montimi që nuk ekziston, ajo do të krijohet.

Selecting Toggle to expert mode +gives some extra available actions, like labeling the partition, as can be +seen in the screenshot below.


[40] You can start this tool from the command line, by typing drakdisk or diskdrake as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakedm.html b/mcc/6/sq/content/drakedm.html new file mode 100644 index 00000000..21b83ece --- /dev/null +++ b/mcc/6/sq/content/drakedm.html @@ -0,0 +1,40 @@ + + + + + Ndërto menaxhuesin e ekranit

Ndërto menaxhuesin e ekranit

drakedm

Here[49] you can choose which display +manager to use to log into your desktop environment. Only the ones available +on your system will be shown.

Most users will only notice that the provided login screens look +different. However, there are differences in supported features, too. LXDM +is a lightweight display manager, SDDM and GDM have more extras.


[49] You can start this tool from the command line, by typing drakedm as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakfirewall.html b/mcc/6/sq/content/drakfirewall.html new file mode 100644 index 00000000..c43cce93 --- /dev/null +++ b/mcc/6/sq/content/drakfirewall.html @@ -0,0 +1,60 @@ + + + + + Ndërto murin-mbrojtës tuaj personal

Ndërto murin-mbrojtës tuaj personal

drakfirewall

This tool[44] is found under the Security +tab in the Mageia Control Center labelled "Set up your personal +firewall". It is the same tool in the first tab of "Configure system +security, permissions and audit".

A basic firewall is installed by default with Mageia. All the incoming +connections from the outside are blocked if they aren't authorised. In the +first screen above, you can select the services for which outside connection +attempts are accepted. For your security, uncheck the first box - +Everything (no firewall) - unless you want to disable +the firewall, and only check the needed services.

It is possible to manually enter the port numbers to open. Click on +Advanced and a new window is opened. In the field +Other ports, enter the needed ports following these +examples :

80/tcp : hap portin 80 tcp protokoll

24000:24010/udp : hap të gjithë portat nga 24000 në 24010 udp protokoll

Portet e listuara duhet të jenë të ndara nga një hapësirë​​.

If the box Log firewall messages in system logs is +checked, the firewall messages will be saved in system logs

Shënim

If you don't host specific services (web or mail server, file sharing, ...) +it is completely possible to have nothing checked at all, it is even +recommended, it won't prevent you from connecting to the internet.

The next screen deals with the Interactive Firewall options. These feature +allow you to be warned of connection attempts if at least the first box +Use Interactive Firewall is checked. Check the second +box to be warned if the ports are scanned (in order to find a failure +somewhere and enter your machine). Each box from the third one onwards +corresponds to a port you opened in the two first screens; in the screenshot +below, there are two such boxes: SSH server and 80:150/tcp. Check them to be +warned each time a connection is attempted on those ports.

These warning are given by alert popups through the network applet.

Në ekran e fundit, zgjidh cilat ndërfaqe rrjeti janë të lidhur në internet +dhe duhet të mbrohen. Pasi butonin Dakord është klikuar, paketat e nevojshme +janë shkarkuar.

Propozim

If you don't know what to choose, have a look in MCC tab Network & +Internet, icon Set up a new network interface.


[44] You can start this tool from the command line, by typing drakfirewall as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakfont.html b/mcc/6/sq/content/drakfont.html new file mode 100644 index 00000000..06388f5d --- /dev/null +++ b/mcc/6/sq/content/drakfont.html @@ -0,0 +1,48 @@ + + + + + Menaxho, shto dhe hiq fontet. Importo fontet Windows(TM)

Menaxho, shto dhe hiq fontet. Importo fontet Windows(TM)

drakfont

This tool[27] is present in the Mageia +Control Center under the System tab. It +allows you to manage the fonts available on the computer. The main screen +above shows:

  • the installed font names, styles and sizes.

  • a preview of the selected font.

  • disa butona shpjegohen këtu më vonë.

Get Windows Fonts:

Ky buton automatikisht shton fontet gjetur në ndarjen Windows. Ju duhet të +keni të instaluar Microsoft Windows.

Opsione:

Kjo ju lejon të specifikoni aplikacionet aso pajisjet (printerë kryesisht) +të aftë për të përdorur fonte.

Ç'instaloi:

This button is to remove installed fonts and possibly save some place. Be +careful when removing fonts because it may have serious consequences on the +documents that use them.

Import:

Allows you to add fonts from a third party (CD, internet, ...). The +supported formats are ttf, pfa, pfb, pcf, pfm and gsf. Click on the +Import button and then on Add, a file manager pops up where you can select the +fonts to install, click on Install when +done. They are installed in the folder /usr/share/fonts.

If the newly installed (or removed) fonts doesn't appear in the Drakfont +main screen, close and re open it to see the modifications.


[27] Ju mund të filloni këtë mjet nga vija e komandës, duke shtypur drakfontë si root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakguard.html b/mcc/6/sq/content/drakguard.html new file mode 100644 index 00000000..d1940908 --- /dev/null +++ b/mcc/6/sq/content/drakguard.html @@ -0,0 +1,70 @@ + + + + + Kontrolli Prindëror

Kontrolli Prindëror

drakguard

This tool[46] is found in the Mageia +Control Center, under the Security tab, labelled Parental +Control. If you don't see this label, you have to install the +drakguard package (not installed by default).

Prezantim

Drakguard is an easy way to set up parental controls on your computer to +restrict who can do what, and at which times of day. Drakguard has three +useful capabilities:

  • It restricts web access to named users to set times of day. It does this by +controlling the shorewall firewall built into Mageia.

  • It blocks execution of particular commands by named users so these users can +only execute what you accept them to execute.

  • It restricts access to websites, both manually defined through +blacklists/whitelists, but also dynamically based on the content of the +website. To achieve this Drakguard uses the leading opensource parental +control blocker DansGuardian.

Configuring Parental controls

Paralajmërim

If your computer contains hard drive partitions that are formatted in Ext2, +Ext3, or ReiserFS format you will see a pop up offering to configure ACL on +your partitions. ACL stands for Access Control Lists, and is a Linux kernel +feature that allows access to individual files to be restricted to named +users. ACL is built into Ext4 and Btrfs file systems, but must be enabled by +an option in Ext2, Ext3, or Reiserfs partitions. If you select 'Yes' to this +prompt drakguard will configure all your partitions to support ACL, and will +then suggest you reboot.

Enable parental control: If checked, the parental +control is enabled and the access to Block programs tab +is opened.

Block all network traffic: If checked, all the +websites are blocked, except the ones in the whitelist tab. Otherwise, all +the websites are allowed, except the ones in the blacklist tab.

User access: Users on the left hand side will have +their access restricted according to the rules you define. Users on the +right hand side have unrestricted access so adult users of the computer are +not inconvenienced. Select a user in the left hand side and click on +Add to add him/her as an allowed user. Select an +user in the right hand side and click on Remove to +remove him/her from the allowed users.

Time control: If checked, internet access is allowed +with restrictions between the Start time and +End time. It is totally blocked outside these time +window.

Blacklist/Whitelist tab

Enter the website URL in the first field at the top and click on the +Add button.

Block Programs Tab

Block Defined Applications: Enables the use of ACL to +restrict access to specific applications. Insert the path to the +applications you wish to block.

Unblock Users list: Users listed on the right hand +side will not be subject to acl blocking.


[46] You can start this tool from the command line, by typing drakguard as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakgw.html b/mcc/6/sq/content/drakgw.html new file mode 100644 index 00000000..4cc78fd9 --- /dev/null +++ b/mcc/6/sq/content/drakgw.html @@ -0,0 +1,67 @@ + + + + + Ndaj linjën e internetit me kompjuterët e tjerë vendas

Ndaj linjën e internetit me kompjuterët e tjerë vendas

drakgw

Parimet

This is useful when you have a +computer (3) which has Internet (2) access and is connected also to a local +network (1). You can use computer (3) as a gateway to give that access to +other workstations (5) and (6) in the local network (1). For this, the +gateway must have two interfaces; the first one such as an ethernet card +must be connected to the local network, and the second one (4) connected to +the Internet (2).

The first step is to verify that the network and the access to Internet are +set up, as documented in seksioni i quajtur “Qendra Rrjetit”.

Gateway wizard

The wizard[23] offers successive steps +which are shown below:

  • Nëse udhëzuesi nuk ka zbuluar të paktën dy ndërfaqe, ai paralajmëron për +këtë dhe kërkon për të ndaluar rrjetin dhe konfiguro pajisjet-elektronike.

  • specifiko ndërfaqen përdorur për lidhjen e internetit. Udhëzuesi +automatikisht sugjeron një nga ndërfaqet, por ju duhet të verifikoni se ajo +që është propozuar është e saktë.

  • përcakto se cila ndërfaqe është përdorur për hyrjen Lan. Udhëzuesi +gjithashtu propozon një, kontrolloni se kjo është e saktë.

  • Udhëzuesi propozon parametrat për rrjetin Lan, të tilla si adresa IP, maskë +dhe emrin e domain. Kontrolloni se këto parametra janë në përputhje me +konfigurimin aktual. Është e rekomanduar që ju të pranoni këto vlera.

  • specify if the computer has to be used as a DNS server. If yes, the wizard +will check that bind is installed. Otherwise, you have to +specify the address of a DNS server.

  • specify if the computer is to be used as a DHCP server. If yes, the wizard +will check that dhcp-server is installed and offer to configure +it, with start and end addresses in the DHCP range.

  • specify if the computer is to be used as a proxy server. If yes, the wizard +will check that squid is installed and offer to configure it, +with the address of the administrator (admin@mydomain.com), name of the +proxy (myfirewall@mydomaincom), the port (3128) and the cache size (100 Mb).

  • The last step allows you to check if the gateway machine is connected to +printers and to share them.

Ju do të paralajmëroheni në lidhje me nevojën për të kontrolluar nëse +muri-mbrojtës është aktiv.

Konfiguro klientin

If you have configured the gateway machine with DHCP, you only need to +specify in the network configuration tool that you get an address +automatically (using DHCP). The parameters will be obtained when connecting +to the network. This method is valid whatever operating system the client is +using.

If you must manually specify the network parameters, you must in particular +specify the gateway by entering the IP-address of the machine acting as the +gateway.

Stop connection sharing

If you want to stop sharing the connection on the Mageia computer, launch +the tool. It will offer to reconfigure the connection or to stop the +sharing.


[23] You can start this tool from the command line, by typing drakgw as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakhosts.html b/mcc/6/sq/content/drakhosts.html new file mode 100644 index 00000000..1e36787a --- /dev/null +++ b/mcc/6/sq/content/drakhosts.html @@ -0,0 +1,43 @@ + + + + + Përcaktimi i pritësit

Përcaktimi i pritësit

drakhosts

If some systems on your network grant you services, and have fixed +IP-addresses, this tool[25] allows to +specify a name to access them more easily. Then you can use that name +instead of the IP-address.

Shto

Me këtë buton, ju shtoni emrin për një sistem të ri. Ju do të merrni një +dritare për të specifikuar IP-adresën, emrin pritës për sistemin, dhe +opsionalisht një pseudonim që mund të përdoret në të njëjtën mënyrë që emri +është.

Modifiko

Ju mund të hyni në parametrat e një hyrje të përcaktuar më parë. Ju merrni +të njëjtën dritare.


[25] You can start this tool from the command line, by typing drakhosts as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakinvictus.html b/mcc/6/sq/content/drakinvictus.html new file mode 100644 index 00000000..e84005bd --- /dev/null +++ b/mcc/6/sq/content/drakinvictus.html @@ -0,0 +1,38 @@ + + + + + Ndërtim i avancuar për ndërfaqen e rrjetit dhe muri-mbrojtës

Ndërtim i avancuar për ndërfaqen e rrjetit dhe muri-mbrojtës

drakinvictus

This page hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

You can start this tool from the command line, by typing drakinvictus as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/draknetcenter.html b/mcc/6/sq/content/draknetcenter.html new file mode 100644 index 00000000..e86e454c --- /dev/null +++ b/mcc/6/sq/content/draknetcenter.html @@ -0,0 +1,87 @@ + + + + + Qendra Rrjetit

Qendra Rrjetit

draknetcenter

This tool[19] is found under the Network +& Internet tab in the Mageia Control Center labelled "Network Center"

Paraqitje

When this tool is launched, a window opens listing all the networks +configured on the computer, whatever their type (wired, wireless, satellite, +etc.). When clicking on one of them, three or four buttons appear, depending +on the network type, to allow you to look after the network, change its +settings or connect/disconnect. This tool isn't intended to create a +network, for this see Set up a new network interface (LAN, ISDN, +ADSL, ...) in the same MCC tab.

In the screenshot below, given as example, we can see two networks, the +first one is wired and connected, recognizable by this icon (this one is not connected ) and the second section shows wireless +networks, not connected recognizable by this icon and this one if connected. For the other network types, +the colour code is always the same, green if connected and red if not +connected.

In the wireless part of the screen, you can also see all the detected +networks, with the SSID, the Signal +strengh, if they are encrypted (in red) or not (in green), and +the Operating mode. Click on the chosen one and then +either on Monitor, Configure +or Connect. It is possible here to go from a network +to another one. If a private network is selected, the Network Settings +window (see below) will open and ask you for extra settings ( an encryption +key in particular).

Click on Refresh to update the screen.

The Monitor button

This button allows you to watch the network activity, downloads (toward the +PC, in red) and uploads (toward the Internet, in green). The same screen is +available by right clicking on the Internet icon in the system tray +-> Monitor Network.

There is a tab for each network (here eth0 is the wired network, lo the +local loopback and wlan0 the wireless network) and a tab connection which +gives details about connection status.

Shënim

At the bottom of the window is a title Traffic +accounting, we will look at that in the next section.

Butoni i konfigurimit

A - Për një rrjet përcjellës

It is possible to change all the settings given during network +creation. Most of the time, checking Automatic IP +(BOOTP/DHCP) will do, but in case of problems, manual +configuration may give better results.

For a residential network, the IP address always looks +like 192.168.0.x, Netmask is 255.255.255.0, and the +Gateway and DNS servers are +available from your providers website.

Enable traffic accounting if checked this will count +the traffic on a hourly, daily or monthly basis. The results are visible in +the Network monitor detailed in the previous section. Once enabled, you may +have to reconnect to the network.

Lejo ndërfaqen të kontrollohet nga Menaxheri +Rrjetit:

This section hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

Butoni Avancimeve:

This section hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

B - Për një rrjeti Wireless

Vetëm sendet që nuk shihen më lart janë shpjeguar.

Mënyra operative:

Select Managed if the connection is via an access +point, there is an ESSID detected. Select +Ad-hoc if it is a peer to peer network. Select +Master if your network card is used as the +access point, your network card needs to support this mode.

Encryption mode and Encryption key:

Në është një rrjet privat, ju duhet të dini këto cilësime.

WEP uses a password and is weaker than WPA which uses a +passphrase. WPA Pre-Shared Key is also called WPA +personal or WPA home. WPA Enterprise is not often used +in private networks.

Allow access point roaming:

Roaming is a technology which enables allows computer to change its access +point while remaining connected to the network.

Butoni Avancimeve:

This page hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

The Advanced Settings button

This section hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.


[19] You can start this tool from the command line, by typing draknetcenter as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/draknetprofile.html b/mcc/6/sq/content/draknetprofile.html new file mode 100644 index 00000000..872ece3c --- /dev/null +++ b/mcc/6/sq/content/draknetprofile.html @@ -0,0 +1,38 @@ + + + + + Menaxho profile të ndryshme rrjetit

Menaxho profile të ndryshme rrjetit

draknetprofile

This page hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

You can start this tool from the command line, by typing draknetprofile as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/draknfs.html b/mcc/6/sq/content/draknfs.html new file mode 100644 index 00000000..836452dc --- /dev/null +++ b/mcc/6/sq/content/draknfs.html @@ -0,0 +1,68 @@ + + + + + Shpërndaj drejtuesit dhe skedat duke përdorur NFS

Shpërndaj drejtuesit dhe skedat duke përdorur NFS

draknfs

Parakushtet

When the wizard[38] is launched for the +first time, it may display the following message:

The package nfs-utils needs to be installed. Do you want to install it?

Pas përfundimit të instalimit, një dritare me një listë të zbrazët shfaqet.

Dritarja kryesore

A list of directories which are shared is displayed. At this step, the list +is empty. The Add button gives access to a +configuration tool.

Modifiko hyrjen

Mjeti konfigurimit është emërtuar "Modifiko hyrjen". Ajo mund të jetë nisur +edhe me butonin Modifiko. Parametrat e mëposhtme janë +të disponueshme.

Skedari NFS

Këtu ju mund të specifikoni cili skedarë është që të ndahet. Butoni +Skedari jep hyrje në një shfletues për të zgjedhur +atë.

Host access

Here you can specify the hosts that are authorized to access the shared +directory.

NFS clients may be specified in a number of ways:

single host: a host either by an abbreviated name +recognized be the resolver, fully qualified domain name, or an IP address

netgroups: NIS netgroups may be given as @group.

wildcards: machine names may contain the wildcard +characters * and ?. For instance: *.cs.foo.edu matches all hosts in the +domain cs.foo.edu.

IP networks: you can also export directories to all +hosts on an IP (sub-)network simultaneously. For example, either +`/255.255.252.0' or `/22' appended to the network base address.

User ID Mapping

map root user as anonymous: maps requests from uid/gid +0 to the anonymous uid/gid (root_squash). The root user from the client +cannot read or write to the files on the server which are created by root on +the server itself.

allow real remote root access: turn off root +squashing. This option is mainly useful for diskless clients +(no_root_squash).

map all users to anonymous user: maps all uids and gids +to the anonymous user (all_squash). Useful for NFS-exported public FTP +directories, news spool directories, etc. The opposite option is no user UID +mapping (no_all_squash), which is the default setting.

anonuid and anongid: explicitly set the uid and gid of +the anonymous account.

Opsione avancuara

Secured Connection: this option requires that requests +originate on an internet port less than IPPORT_RESERVED (1024). This option +is on by default.

Read-Only share: allow either only read or both read +and write requests on this NFS volume. The default is to disallow any +request which changes the filesystem. This can also be made explicit by +using this option.

Synchronous access: prevents the NFS server from +violating the NFS protocol and to reply to requests before any changes made +by these requests have been committed to stable storage (e.g. disc drive).

Subtree checking: enable subtree checking which can +help improve security in some cases, but can decrease reliability. See +exports(5) man page for more details.

Hyrja menysë

Deri tani lista ka të paktën një hyrje.

File|Write conf

Save the current configuration.

NFS Server|Restart

Server është ndalur dhe rifilluar me skedarët aktuale konfigurimit.

NFS Server|Reload

The configuration displayed is reloaded from the current configuration +files.


[38] You can start this tool from the command line, by typing draknfs as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakproxy.html b/mcc/6/sq/content/drakproxy.html new file mode 100644 index 00000000..6bd52b48 --- /dev/null +++ b/mcc/6/sq/content/drakproxy.html @@ -0,0 +1,45 @@ + + + + + Proxy

Proxy

drakproxy

If you have to use a proxy server to access to the internet, you can use +this tool[22] to configure it. Your net +administrator will give you the information you need. You can also specify +some services which can be accessed without the proxy by exception.

From Wikipedia, on 2012-09-24, article Proxy server: In computer networks, a +proxy server is a server (a computer system or an application) that acts as +an intermediary for requests from clients seeking resources from other +servers. A client connects to the proxy server, requesting some service, +such as a file, connection, web page, or other resource available from a +different server. The proxy server evaluates the request as a way to +simplify and control their complexity.


[22] You can start this tool from the command line, by typing drakproxy as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakrpm-edit-media.html b/mcc/6/sq/content/drakrpm-edit-media.html new file mode 100644 index 00000000..b2cfec01 --- /dev/null +++ b/mcc/6/sq/content/drakrpm-edit-media.html @@ -0,0 +1,95 @@ + + + + + Configure Media

Configure Media

drakrpm-edit-media

Me rëndësi

First thing to do after an install is to add software sources (also known as +repositories, media, mirrors). That means you must select the media sources +to be used to install and update packages and applications. (see Add button +below).

Shënim

If you install (or upgrade) Mageia using an optical media (DVD or CD) or a +USB device, there will be a software source configured to the optical media +used. To avoid being asked to insert the media when you install new +packages, you should disable (or delete) this media.  (It will have the +media type CD-Rom).

Shënim

Your system is running under an architecture which may be 32-bit (called +i586), or 64-bit (called x86_64). Some packages are independent of whether +your system is 32-bit or 64-bit; these are called noarch packages. They +don't have their own noarch directories on the mirrors, but are all in both +the i586 and the x86_64 media.

This tool is present in the Mageia Control Center under the tab Software management.[4]

kolonat

Mundëso Kolonat:

The checked media will be used to install new packages. Be cautious with +some media such as Testing and Debug, they could make your system unusable.

Përditësime Kolonat:

The checked media will be used to update packages, it must be enabled. Only +media with "Update" in its name should be selected. For security reasons, +this column isn't modifiable in this tool, you must open a console as root +and type drakrpm-edit-media --expert.

Column medium:

Display the medium name. Mageia official repositories for final release +versions contain at least:

  • Core which contains most programs available +supported by Mageia.

  • Jofalas e cila përmban disa programe të +cilët nuk janë falas

  • Tainted free software for which there might +be patent claims in some countries.

    Each medium has 4 sub-sections:

  • Release the packages as of the day the this +version of Mageia was released.

  • Updates the packages updated since release +due to security or bug concerns. Everyone should have this medium enabled, +even with a very slow internet connection.

  • Backports some packages of new versions +backported from Cauldron (the next version under development).

  • Testing which is used for temporary tests +of new updates, to allow the bug reporters and the QA team to validate the +corrections.

The buttons on the right

Hiq:

Për të hequr një mjete, klikoni mbi të dhe pastaj në këtë buton. Kjo është e +mençur për të hequr mjete që përdoren për instalim (CD ose DVD për shembull) +që të gjitha paketat që ai përmban janë në mjetin zyrtarë të lëshimit +Bërthamë.

Redakto:

Allows you to modify the selected medium settings, (URL, downloader and +proxy).

Add:

Add the official repositories available on the Internet. These repositories +contain only safe and well tested software. Clicking on the "Add" button +adds the mirrorlist to your configuration, it is designed to make sure that +you install and update from a mirror close to you. If you prefer to choose a +specific mirror, then add it by choosing "Add a specific media mirror" from +the drop-down "File" menu.

Up and down arrows:

Change the list order. When Drakrpm looks for a package, it reads the list +in the displayed order and will install the first package found for the same +release number - in the event of a version mismatch, the latest release will +be installed. So if possible, put the fastest repositories at the top.

Menyja

File -> Update:

A window pops up with the media list. Select the ones you want to update and +click on the Update button.

File -> Add a specific media mirror:

Suppose you aren't happy with the actual mirror, because for example it's +too slow or often unavailable, you can choose another mirror. Select all the +actual media and click on Remove to take them +out. Click on File -> Add a specific media mirror, choose +between update only or the full set (if you do not know, choose the +Full set of sources) and accept the contact by +clicking on Yes. This window opens:

You can see, on the left, a list of countries, choose yours or one very +close by clicking on the > symbol, this will display all the available +mirrors in that country. Select one and click on OK.

File -> Add a custom medium:

It is possible to install a new media (from a third party for example) that +isn't supported by Mageia. A new window appears:

Select the medium type, find a smart +name that well define the medium and give the URL (or the path, according to +the medium type)

Opsione -> Opsione Globale:

This item allows you to choose when to "Verify RPMs to be installed" (always +or never), the download program (curl, wget or aria2) and to define the +download policy for information about the packages (on demand -by default-, +update only, always or never).

Opsione -> Menaxho çelësat:

To guarantee a high level of security, digital keys are used to authenticate +the media. It is possible for each medium to allow or disallow a key. In the +window that appear, select a medium and then click on +Add to allow a new key or to select a key and click +on Remove to disallow that key.

Paralajmërim

Do this with care, as with all security-related questions

Opsione -> Proxi:

If you need to use a proxy server for internet access, you can configure it +here. You only need to give the Proxy hostname and if +necessary a Username and Password.

For more information about configuring the media, see the Mageia Wiki +page.


[4] You can start this tool from the command line, by typing drakrpm-edit-media as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/draksambashare.html b/mcc/6/sq/content/draksambashare.html new file mode 100644 index 00000000..5652df81 --- /dev/null +++ b/mcc/6/sq/content/draksambashare.html @@ -0,0 +1,65 @@ + + + + + Share directories and drives with Samba

Share directories and drives with Samba

draksambashare

Paraqitje

Samba is a protocol used in different Operating Systems to share some +resources like directories or printers. This tool allows you to configure +the machine as a Samba server using the protocol SMB/CIFS. This protocol is +also used by Windows(R) and workstations with this OS can access the +resources of the Samba server.

Përgatitje

To be accessed from other workstations, the server has to have a fixed IP +address. This can be specified directly on the server, for example with +, or at the DHCP server which identifies +the station with its MAC-address and give it always the same address. The +firewall has also to allow the incoming requests to the Samba server.

Wizard - Standalone server

At the first run, the tools [36] checks if +needed packages are installed and proposes to install them if they are not +yet present. Then the wizard to configure the Samba server is launched.

In the next window the Standalone server configuration option is already +selected.

Then specify the name of the workgroup. This name should be the same for the +access to the shared resources.

The netbios name is the name which will be used to designate the server on +the network.

Choose the security mode:

  • user: the client must be authorized to access the +resource

  • share: the client authenticates itself separately for +each share

You can specify which hosts are allowed to access the resources, with IP +address or host name.

Specify the server banner. The banner is the way this server will be +described in the Windows workstations.

The place where Samba can log information can be specified at the next step.

The wizard displays a list of the chosen parameters before you accept the +configuration. When accepted, the configuration will be written in +/etc/samba/smb.conf.

Wizard - Primary domain controller

If the "Primary domain controller" +option is selected, the wizard asks for indication if Wins is to support or +not and to provide admin users names. The following steps are then the same +as for standalone server, except you can choose also the security mode:

  • domain: provides a mechanism for storing all user and +group accounts in a central, shared, account repository. The centralized +account repository is shared between (security) controllers.

Declare a directory to share

With the Add button, we get:

A new entry is thus added. It can be modified with the +Modify button. Options can be edited, such as whether +the directory is visible to the public, writable or browseable. The share +name can not be modified.

Hyrja menysë

When the list has at least one entry, menu entries can be used.

File|Write conf. Save the current configuration in /etc/samba/smb.conf.

Samba server|Konfiguro. The wizard can be run again with this command.

Samba server|Rifillo. Server është ndalur dhe rifilluar me skedarët aktuale konfigurimit.

Samba Server|Ngarko. The configuration displayed is reloaded from the current configuration +files.

Printers share

Samba also allows you to share printers.

Përdoruesit samba

In this tab, you can add users who are allowed to access the shared +resources when authentication is required. You can add users from


[36] You can start this tool from the command line, by typing draksambashare as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/draksec.html b/mcc/6/sq/content/draksec.html new file mode 100644 index 00000000..eed1b133 --- /dev/null +++ b/mcc/6/sq/content/draksec.html @@ -0,0 +1,42 @@ + + + + + Konfiguro vërtetimin për veglat Mageia

Konfiguro vërtetimin për veglat Mageia

draksec

This tool[45]is present in the Mageia +Control Center under the tab Security

It allows to give the regular users the needed rights to accomplish tasks +usually done by the administrator.

Click on the little arrow before the item you want to drop down: +

Most of the tools available in the Mageia Control Center are displayed in +the left side of the window (see the screenshot above) and for each tool, a +drop down list on the right side gives the choice between:

  • Default: The launch mode depends on the chosen security level. See in the +same MCC tab, the tool "Configure system security, permissions and audit".

  • User password: The user password is asked before the tool launching.

  • Administrator password: The root password is asked before the tool launching

  • No password: The tool is launched without asking any password.


[45] You can start this tool from the command line, by typing draksec as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/draksnapshot-config.html b/mcc/6/sq/content/draksnapshot-config.html new file mode 100644 index 00000000..7281f4e7 --- /dev/null +++ b/mcc/6/sq/content/draksnapshot-config.html @@ -0,0 +1,54 @@ + + + + + Foto-çasti

Foto-çasti

draksnapshot-config

This tool[34] is available in MCC's +System tab, in the Administration +tools section.

When you start this tool in MCC for the first time, you will see a message +about installing draksnapshot. Click on Install to +proceed. Draksnapshot and some other packages it needs will be installed.

Click again on Snapshots, you will see the +Settings screen. Tick Enable +Backups and, if you want to backup the whole system, +Backup the whole system.

If you only want to backup part of your directories, then choose +Advanced. You will see a little pop-up screen. Use the +Add and Remove buttons next to +the Backup list to include or exclude directories and +files from the backup. Use the same buttons next to the +Exclude list to remove subdirectories and/or files from +the chosen directories, that should not be +included in the backup. Click on Close when you are +done.

Now give the path to Where to backup, or choose the +Browse button to select the correct path. Any mounted +USB-key or external HD can be found in /run/media/your_user_name/. +

Click on Apply to make the snapshot.


[34] You can start this tool from the command line, by typing draksnapshot-config as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/draksound.html b/mcc/6/sq/content/draksound.html new file mode 100644 index 00000000..dcd7109e --- /dev/null +++ b/mcc/6/sq/content/draksound.html @@ -0,0 +1,47 @@ + + + + + Konfigurimi zërit

Konfigurimi zërit

draksound

This tool[12] is present in the Mageia +Control Center under the tab Hardware.

Draksound deals with the sound configuration, PulseAudio options and +troubleshooting. It will help you if you experience sound problems or if you +change the sound card.

PulseAudio is a sound server. It receives all the sound +inputs, mixes them according to the user preferences and sends the resulting +sound to the output. See Menu ->Sound and video -> PulseAudio +volume control to set these preferences.

PulseAudio is the default sound server and it is recommended to leave it +enabled.

Glitch-Free improves PulseAudio with some programs. It +is also recommended to leave it enabled.

The Troubleshooting button gives assistance with +fixing any problems you may have. You will find it helpful to try this +before asking the community for help.

The Advanced button displays a new window with an +obvious button.


[12] You can start this tool from the command line, by typing draksound as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakups.html b/mcc/6/sq/content/drakups.html new file mode 100644 index 00000000..6e7b36ab --- /dev/null +++ b/mcc/6/sq/content/drakups.html @@ -0,0 +1,38 @@ + + + + + Vendos një UPS për monitorimin e energjisë

Vendos një UPS për monitorimin e energjisë

drakups

This page hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

You can start this tool from the command line, by typing drakups as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakvpn.html b/mcc/6/sq/content/drakvpn.html new file mode 100644 index 00000000..64b96f1c --- /dev/null +++ b/mcc/6/sq/content/drakvpn.html @@ -0,0 +1,47 @@ + + + + + Configure VPN Connection to secure network access

Configure VPN Connection to secure network access

drakvpn

Paraqitje

This tool[24] allows to configure secure +access to a remote network establishing a tunnel between the local +workstation and the remote network. We discuss here only of the +configuration on the workstation side. We assume that the remote network is +already in operation, and that you have the connection information from the +network administrator, like a .pcf configuration file .

Konfigurimi

Së pari, zgjidhni ose Cisco VPN flotacion ose OpenVPN, në varësi protokollit +që është përdorur për rrjetin tuaj privat virtual.

Pastaj jepni lidhjen tuaj një emër.

Në ekran tjetër, jepni të dhënat për lidhjen tuaj VPN.

  • Për Cisco VPN

  • For openvpn. The openvpn package and its dependencies will be installed the +first time the tool is used.

    Select the files that you received +from the network administrator.

    Parametrat avancuara:

    The next screen asks for IP-address of the gateway.

When the parameters are set, you have the option of starting the VPN +connection.

This VPN connection can be set to start automatically with a network +connection. To do this, reconfigure the network connection to always connect +to this VPN.


[24] You can start this tool from the command line, by typing drakvpn as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakwizard_apache2.html b/mcc/6/sq/content/drakwizard_apache2.html new file mode 100644 index 00000000..8ec6eaf1 --- /dev/null +++ b/mcc/6/sq/content/drakwizard_apache2.html @@ -0,0 +1,60 @@ + + + + + Configure webserver

Configure webserver

drakwizard apache2

This tool[6] can help you to set up a web +server. +

What is a web server?

+ Web server is the software that helps to deliver web content that can be +accessed through the Internet. (From Wikipedia) +

Setting up a web server with drakwizard apache2

+ Welcome to the web server wizard. +

  1. Paraqitje

    + The first page is just an introduction, click Next. +

  2. Selecting Server Exposer: Local Net and/or World

    + Exposing the web server to the Internet has it's risks. Be ready for bad +things. +

  3. Server User Module

    + Allows users to create their own sites. +

  4. User web directory name

    + The user needs to create and populate this directory, then the server will +display it. +

  5. Server Document Root

    + Allows you to configure the path to the web servers default documents. +

  6. Përmbledhje

    + Take a second to check these options, then click +Next. +

  7. Përfundo

    + You're done! Click Finish. +


[6] You can start this tool from the command line, by typing drakwizard apache2 as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakwizard_bind.html b/mcc/6/sq/content/drakwizard_bind.html new file mode 100644 index 00000000..d1d2fddf --- /dev/null +++ b/mcc/6/sq/content/drakwizard_bind.html @@ -0,0 +1,38 @@ + + + + + Konfiguro DNS

Konfiguro DNS

drakwizard bind

This page hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

You can start this tool from the command line, by typing drakwizard bind as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakwizard_dhcp.html b/mcc/6/sq/content/drakwizard_dhcp.html new file mode 100644 index 00000000..a8f72454 --- /dev/null +++ b/mcc/6/sq/content/drakwizard_dhcp.html @@ -0,0 +1,52 @@ + + + + + Konfiguro DHCP

Konfiguro DHCP

drakwizard dhcp

Shënim

This tool is broken in Mageia 4 because of new naming scheme for the Net +interfaces

This tool[7] can help you to set up a +DHCP server. It is a component of drakwizard which should +be installed before you can access to it.

What is DHCP?

The Dynamic Host Configuration Protocol (DHCP) is a +standardized networking protocol used on IP networks that dynamically +configures IP addresses and other information that is needed for Internet +communication. (From Wikipedia)

Setting up a DHCP server with drakwizard dhcp

Welcome to the DHCP server wizard.

  1. Paraqitje

    The first page is just an introduction, click Next.

  2. Selecting Adaptor

    Choose the network interface, which is connected to the subnet, and for +which DHCP will assign IP addresses, and then click +Next.

  3. Select IP range

    Select the beginning and ending IP addresses of the range of IPs you want +the server to offer, along with the IP of the gateway machine connecting to +some place outside the local network, hopefully close to the Internet, then +click Next.

  4. Përmbledhje

    Take a second to check these options, then click +Next.

  5. Hold on...

    This can be fixed. Click Previous a few times and +change things around.

  6. Hours later...

What is done

  • Installing the package dhcp-server if needed;

  • Saving /etc/dhcpd.conf in /etc/dhcpd.conf.orig;

  • Creating a new dhcpd.conf starting from +/usr/share/wizards/dhcp_wizard/scripts/dhcpd.conf.default and +adding the new parameters:

    • hname

    • dns

    • net

    • ip

    • mask

    • rng1

    • rng2

    • dname

    • gateway

    • tftpserverip

    • dhcpd_interface

  • Also modifying Webmin configuration file +/etc/webmin/dhcpd/config

  • Restarting dhcpd.


[7] You can start this tool from the command line, by typing drakwizard dhcp as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakwizard_ntp.html b/mcc/6/sq/content/drakwizard_ntp.html new file mode 100644 index 00000000..79fb2e3e --- /dev/null +++ b/mcc/6/sq/content/drakwizard_ntp.html @@ -0,0 +1,51 @@ + + + + + Konfiguro orën

Konfiguro orën

drakwizard ntp

This tool[9] purpose is to set the time of +your server synchronised with an external server. It isn't installed by +default and you have to also install the drakwizard and drakwizard-base +packages.

Setup a NTP server with drakwizard ntp

  1. After a welcome screen (see above), the second one ask you to choose three +time servers in the drop down lists and suggests to use pool.ntp.org twice +because this server always points to available time servers.

  2. The following screens allows to choose the region and the city and then, you +arrive on a summary. If something is wrong, you can obviously change it +using the Previousbutton. If everything is right, +click on the Next button to proceed to the test. It +may take a while and you finally get this screen below:

  3. Kliko në butonin Fund për të mbyllur mjetin

What is done

This tool executes the following steps:

  • Installing the package ntp if needed

  • Saving the files /etc/sysconfig/clock to +/etc/sysconfig/clock.orig and +/etc/ntp/step-tickers to +/etc/ntp/step-tickers.orig;

  • Writing a new file /etc/ntp/step-tickers with the list of +servers;

  • Modifying the file /etc/ntp.conf by inserting the first server +name;

  • Stopping and starting crond, atd and +ntpd services;

  • Setting the hardware clock to the current system time with UTC reference.


[9] You can start this tool from the command line, by typing drakwizard ntp as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakwizard_proftpd.html b/mcc/6/sq/content/drakwizard_proftpd.html new file mode 100644 index 00000000..4d148a30 --- /dev/null +++ b/mcc/6/sq/content/drakwizard_proftpd.html @@ -0,0 +1,60 @@ + + + + + Konfiguro FTP

Konfiguro FTP

drakwizard proftpd

This tool[5] can help you to set up an +FTP server. +

Çfarë është FTP?

+ File Transfer Protocol (FTP) is a standard network +protocol used to transfer files from one host to another host over a +TCP-based network, such as the Internet. (From Wikipedia) +

Setting up an FTP server with drakwizard proftpd

+ Welcome to the FTP wizard. Buckle up. +

  1. Paraqitje

    + The first page is just an introduction, click Next. +

  2. Selecting Server Exposer: Local Net and/or World

    + Exposing the FTP server to the Internet has it's risks. Be ready for bad +things. +

  3. Server Informacion

    + Enter name the sever will use to introduce itself, someone to email +complaints too and whether to allow root login access. +

  4. Server Opsione

    + Set listening port, jailed user, allow resumes and/or FXP +(File eXchange Protocol) +

  5. Përmbledhje

    + Take a second to check these options, then click +Next. +

  6. Përfundo

    + You're done! Click Finish. +


[5] You can start this tool from the command line, by typing drakwizard proftpd as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakwizard_squid.html b/mcc/6/sq/content/drakwizard_squid.html new file mode 100644 index 00000000..2d7c1ab8 --- /dev/null +++ b/mcc/6/sq/content/drakwizard_squid.html @@ -0,0 +1,50 @@ + + + + + Konfiguro proxy

Konfiguro proxy

drakwizard squid

This tool[8] can help you to set up a +proxy server. It is a component of drakwizard which should be installed +before you can access to it.

What is a proxy server?

A proxy server is a server (a computer system or an application) that acts +as an intermediary for requests from clients seeking resources from other +servers. A client connects to the proxy server, requesting some service, +such as a file, connection, web page, or other resource available from a +different server and the proxy server evaluates the request as a way to +simplify and control its complexity. (From Wikipedia)

Setting up a proxy server with drakwizard squid

Welcome to the proxy server wizard.

  1. Paraqitje

    The first page is just an introduction, click Next.

  2. Selecting the proxy port

    Select the proxy port browsers will connect through, then click +Next.

  3. Set Memory and Disk Usage

    Set memory and disk cache limits, then click Next.

  4. Select Network Access Control

    Set visibility to local network or world, then click +Next.

  5. Grant Network Access

    Grant access to local networks, then click Next.

  6. Use Upper Level Proxy Server?

    Cascade through another proxy server? If no, skip next step.

  7. Upper Level Proxy URL and Port

    Provide upper level proxy hostname and port, then click +Next.

  8. Përmbledhje

    Take a second to check these options, then click +Next.

  9. Start during boot?

    Choose if the proxy server should be started during the boot time, then +click Next.

  10. Përfundo

    You're done! Click Finish.

What is done

  • Installing the package squid if needed;

  • Saving /etc/squid/squid.conf in +/etc/squid/squid.conf.orig;

  • Creating a new squid.conf starting from +squid.conf.default and adding the new parameters:

    • cache_dir

    • localnet

    • cache_mem

    • http_port

    • level 1, 2 or 3 and http_access according to level

    • cache_peer

    • visible_hostname

  • Restarting squid.


[8] You can start this tool from the command line, by typing drakwizard squid as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakwizard_sshd.html b/mcc/6/sq/content/drakwizard_sshd.html new file mode 100644 index 00000000..6b84476e --- /dev/null +++ b/mcc/6/sq/content/drakwizard_sshd.html @@ -0,0 +1,72 @@ + + + + + Konfigurimi demonin OpenSSH

Konfigurimi demonin OpenSSH

drakwizard sshd

This tool[10] can help you to set up an +SSH daemon. +

What is SSH?

+ Secure Shell (SSH) is a cryptographic network protocol for secure data +communication, remote command-line login, remote command execution, and +other secure network services between two networked computers that connects, +via a secure channel over an insecure network, a server and a client +(running SSH server and SSH client programs, +respectively). (From Wikipedia) +

Setting up an SSH daemon with drakwizard sshd

+ Welcome to the Open SSH wizard. +

  1. Select Type of Configure Options

    + Choose Expert for all options or +Newbie to skip steps 3-7, click +Next. +

  2. General Options

    + Sets visibility and root access options. Port 22 is the standard +SSH port. +

  3. Authentication Methods

    + Allow a variety of authentication methods users can use while connecting, +then click Next. +

  4. Logging

    + Choose logging facility and level of output, then click +Next. +

  5. Login Options

    + Configure per-login settings, then click Next. +

  6. User Login Options

    + Configure the user access settings, then click Next. +

  7. Compression and Forwarding

    + Configure X11 forwarding and compression during transfer, then click +Next. +

  8. Përmbledhje

    + Take a second to check these options, then click +Next. +

  9. Përfundo

    + You're done! Click Finish. +


[10] You can start this tool from the command line, by typing drakwizard sshd as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/drakxservices.html b/mcc/6/sq/content/drakxservices.html new file mode 100644 index 00000000..c4bb884f --- /dev/null +++ b/mcc/6/sq/content/drakxservices.html @@ -0,0 +1,38 @@ + + + + + Menaxho shërbimet e sistemit duke mundësuar ose gjymtuar ato

Menaxho shërbimet e sistemit duke mundësuar ose gjymtuar ato

drakxservices

This page hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

You can start this tool from the command line, by typing drakxservices as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/favicon.png b/mcc/6/sq/content/favicon.png new file mode 100644 index 00000000..5868d96b Binary files /dev/null and b/mcc/6/sq/content/favicon.png differ diff --git a/mcc/6/sq/content/harddrake2.html b/mcc/6/sq/content/harddrake2.html new file mode 100644 index 00000000..1b96a469 --- /dev/null +++ b/mcc/6/sq/content/harddrake2.html @@ -0,0 +1,52 @@ + + + + + Hardware configuration

Hardware configuration

harddrake2

This tool[11] gives a general view of the +hardware of your computer. When the tool is launched, it executes a job to +look for every element of the hardware. For that, it uses the command +ldetect which refers to a list of hardware in +ldetect-lst package.

Dritarja

Dritarja është e ndarë në dy kolona.

Kolonën e majtë përmban një listë të pajisjeve-elektronike të +zbuluara. Pajisjet janë të grupuara sipas kategorive. Kliko në> për të +zgjeruar përmbajtjen e një kategorie. Çdo pajisje mund të përzgjidhet në +këtë kolonë.

The right column displays information about the selected device. The +Help -> Fields description gives some information +about the content of the fields.

According to which type of device is selected, either one or two buttons are +available at the bottom of the right column:

  • Set current driver options: this can be used to +parameterize the module which is used in relation to the device. This must +used by experts only.

  • Run config tool: access to the tool which can +configure the device. The tool can often be accessed directly from the MCC.

Menyja

Opsione

The options menu gives the opportunity to check boxes to +enable automatic detection:

  • modemi

  • Pajisje jaz

  • Zip parallel devices

By default these detections are not enabled, because they are slow. Check +the appropriate box(es) if you have this hardware connected. Detection will +be operational the next time this tool is started.


[11] You can start this tool from the command line, by typing harddrake2 as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/images/drakgw-net.png b/mcc/6/sq/content/images/drakgw-net.png new file mode 100644 index 00000000..5867d56e Binary files /dev/null and b/mcc/6/sq/content/images/drakgw-net.png differ diff --git a/mcc/6/sq/content/images/draknetcenterEthernet-off.png b/mcc/6/sq/content/images/draknetcenterEthernet-off.png new file mode 100644 index 00000000..ca156174 Binary files /dev/null and b/mcc/6/sq/content/images/draknetcenterEthernet-off.png differ diff --git a/mcc/6/sq/content/images/draknetcenterEthernet-on.png b/mcc/6/sq/content/images/draknetcenterEthernet-on.png new file mode 100644 index 00000000..0e3ddda6 Binary files /dev/null and b/mcc/6/sq/content/images/draknetcenterEthernet-on.png differ diff --git a/mcc/6/sq/content/images/draknetcenterWireless-off.png b/mcc/6/sq/content/images/draknetcenterWireless-off.png new file mode 100644 index 00000000..bda3b94f Binary files /dev/null and b/mcc/6/sq/content/images/draknetcenterWireless-off.png differ diff --git a/mcc/6/sq/content/images/draknetcenterWireless-on.png b/mcc/6/sq/content/images/draknetcenterWireless-on.png new file mode 100644 index 00000000..e9bfacdc Binary files /dev/null and b/mcc/6/sq/content/images/draknetcenterWireless-on.png differ diff --git a/mcc/6/sq/content/images/rpmdrake2.png b/mcc/6/sq/content/images/rpmdrake2.png new file mode 100644 index 00000000..cf0777cc Binary files /dev/null and b/mcc/6/sq/content/images/rpmdrake2.png differ diff --git a/mcc/6/sq/content/images/rpmdrake3.png b/mcc/6/sq/content/images/rpmdrake3.png new file mode 100644 index 00000000..cd302f31 Binary files /dev/null and b/mcc/6/sq/content/images/rpmdrake3.png differ diff --git a/mcc/6/sq/content/images/rpmdrake4.png b/mcc/6/sq/content/images/rpmdrake4.png new file mode 100644 index 00000000..8cfea7fb Binary files /dev/null and b/mcc/6/sq/content/images/rpmdrake4.png differ diff --git a/mcc/6/sq/content/images/rpmdrake5.png b/mcc/6/sq/content/images/rpmdrake5.png new file mode 100644 index 00000000..3b4dd1eb Binary files /dev/null and b/mcc/6/sq/content/images/rpmdrake5.png differ diff --git a/mcc/6/sq/content/images/rpmdrake6.png b/mcc/6/sq/content/images/rpmdrake6.png new file mode 100644 index 00000000..47643240 Binary files /dev/null and b/mcc/6/sq/content/images/rpmdrake6.png differ diff --git a/mcc/6/sq/content/index.html b/mcc/6/sq/content/index.html new file mode 100644 index 00000000..60e5c91f --- /dev/null +++ b/mcc/6/sq/content/index.html @@ -0,0 +1,39 @@ + + + + + Mageia Control Center

The texts and screenshots in this manual are available under the CC BY-SA +3.0 license http://creativecommons.org/licenses/by-sa/3.0/. +

Ky manual është prodhuar me ndihmën e Calenco CMS zhvilluar nga NeoDoc. +

Është shkruar nga vullnetarë në kohën e tyre të lirë. Ju lutem kontaktoni +Ekipi +Dokumentaciont, nëse dëshironi të përmirësoni këtë manual.

Përmbajtjet

Rreth Manualit për Qendrën e Kontrollit Mageia
Menaxhuesi Programeve
Software Management (Install and Remove Software)
Software Packages Update
Konfiguro frekuencën e përditësimeve
Configure Media
Shpërndaj
Konfiguro FTP
Configure webserver
Shërbimet e Rrjetit
Konfiguro DHCP
Konfiguro DNS
Konfiguro proxy
Konfiguro orën
Konfigurimi demonin OpenSSH
Pjesë-elektronike
Hardware configuration
Konfigurimi zërit
3D Desktop Effects
Ndërto grafikën e serverit
Set up the Keyboard Layout
Ndërto pajisjen tregues (miu, pjesë-prekës)
Instalo dhe konfiguro një printer
Konfiguro skanerin
Vendos një UPS për monitorimin e energjisë
Rrjeti dhe Interneti
Qendra Rrjetit
Ndërto një ndërfaqe rrjeti (LAN, ISDN, ADSL, ...)
Hiq një Lidhje
Proxy
Ndaj linjën e internetit me kompjuterët e tjerë vendas
Menaxho profile të ndryshme rrjetit
Configure VPN Connection to secure network access
Përcaktimi i pritësit
Sistemi
Vërtetimi
Menaxho shërbimet e sistemit duke mundësuar ose gjymtuar ato
Menaxho, shto dhe hiq fontet. Importo fontet Windows(TM)
Menaxho datën dhe kohën
Menaxho lokalizimin për sistemin tuaj
Shiko dhe kërko shënimet e sistemit
Hap panel komandimi si administrator
Përdoruesit dhe grupet
Importo Windows(TM) dokumente dhe konfigurime
Foto-çasti
Shpërndarës Rrjeti
Hyrje në shpërndarjen e drejtuesve dhe skedarëve Windows (SMB)
Share directories and drives with Samba
Hyrje e shpërndarjes drejtuese dhe skedarëve të NFS
Shpërndaj drejtuesit dhe skedat duke përdorur NFS
Hyrje në shpërndarjen e drejtuesve dhe skedarëve WebDAV
Hard Disqet Vendor
Menaxho ndarjet e hardiskut
Gdhendësi CD/DVD
Shpërndaj ndarjet e hardiskut tuaj
Siguria
MSEC: System Security and Audit
Ndërto murin-mbrojtës tuaj personal
Konfiguro vërtetimin për veglat Mageia
Ndërtim i avancuar për ndërfaqen e rrjetit dhe muri-mbrojtës
Kontrolli Prindëror
Ndezje
Konfiguro hyrje automatike për të hyrë automatikisht
Ndërto ndezjen e sistemit
Ndërto menaxhuesin e ekranit
Të tjera mjete Mageia
Mageia Bug Report Tool
Collect Logs and System Information for Bug Reports
Display Available NFS And SMB Shares
Display Your PCI, USB and PCMCIA Information
© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
   Vazhdo
loading table of contents...
diff --git a/mcc/6/sq/content/keyboarddrake.html b/mcc/6/sq/content/keyboarddrake.html new file mode 100644 index 00000000..2a36abf9 --- /dev/null +++ b/mcc/6/sq/content/keyboarddrake.html @@ -0,0 +1,43 @@ + + + + + Set up the Keyboard Layout

Set up the Keyboard Layout

tastieradrake

Paraqitje

The keyboarddrake tool[15] helps you +configure the basic layout for the keyboard that you wish to use on +Mageia. It affects the keyboard layout for all users on the system. It can +be found in the Hardware section of the Mageia Control Center (MCC) labelled +"Configure mouse and keyboard".

Keyboard Layout

Here you can select which keyboard layout you wish to use. The names (listed +in alphabetical order) describe the language, country, and/or ethnicity each +layout should be used for.

Keyboard Type

This menu lets you select the type of keyboard you are using. If you are +unsure of which to choose, it is best to leave it as the default type.


[15] You can start this tool from the command line, by typing keyboarddrake as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/localedrake.html b/mcc/6/sq/content/localedrake.html new file mode 100644 index 00000000..7462afbe --- /dev/null +++ b/mcc/6/sq/content/localedrake.html @@ -0,0 +1,49 @@ + + + + + Menaxho lokalizimin për sistemin tuaj

Menaxho lokalizimin për sistemin tuaj

localedrake

This tool[29] can be found in the System +section of the Mageia Control Center (MCC) labelled "Manage localization for +your system". It opens with a window in which you can choose your +language. The choice is adapted to languages selected during installation.

The Advanced button give access to activate +compatibility with old encoding (non UTF8).

The second window shows a list of countries according to the selected +language. The button Other Countries gives access to +countries not listed.

You have to restart your session after any modifications.

Metodë hyrëse

In the Other Countries screen you can also select an +input method (from the drop-down menu at the bottom of the list). Input +methods allow users to input multilingual characters (Chinese, Japanese, +Korean, etc).

For Asian and African locales, IBus will be set as default input method so +users should not need to configure it manually.

Other input methods (SCIM, GCIN, HIME, etc.) also provide similar functions +and can, if not available from the drop-down menu, be installed in another +part of the Mageia Control Center. See seksioni i quajtur “Software Management (Install and Remove Software)”.


[29] You can also start this tool from the command line, by typing localedrake as root. +

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/logdrake.html b/mcc/6/sq/content/logdrake.html new file mode 100644 index 00000000..8126fe4d --- /dev/null +++ b/mcc/6/sq/content/logdrake.html @@ -0,0 +1,61 @@ + + + + + Shiko dhe kërko shënimet e sistemit

Shiko dhe kërko shënimet e sistemit

logdrake

This tool[30] is found in the Mageia +Control Center System tab, labelled "View and search system +logs".

To do a search in the logs

First, enter the key string you want to look for in the Matching field and/or the key string you want to +do not wish to see amongst the answers in the field +but not matching. Then select the file(s) +to search in the Choose file field. Optionally, it is +possible to limit the search to only one day. Select it in the Calendar, using the little arrows on each side of the +month and year, and check "Show only for the selected +day". At last, click on the search button +to see the results in the window called Content of the +file. It is possible to save the results in the .txt format by +clicking on the Save button.

Shënim

The Mageia Tools Logs houses the logs from the Mageia +configuration tools such as the Mageia Control Center tools. These logs are +updated each time a configuration is modified.

To configure a mail alert

Mail alert automatically checks the system load and +the services every hour and if necessary sends an e-mail to the configured +address.

To configure this tool, click on the Mail +Alert button and then, in the next screen, on the +Configure the mail alert system drop down button. Here, all the +running services are displayed and you can choose which ones you want to +look watch. (See screenshot above).

The following services can be watched :

  • Shërbimi Webmin

  • Server i letrave Postfix

  • Server FTP

  • Apache World Wide Web Server

  • Server SSH

  • Server Samba

  • Shërbime Xinetd

  • BIND Domain Name Resolve

In the next screen, select the Load value you consider +unacceptable. The load represents the demand to a process, a high load slows +the system down and a very high load may indicate that a process has gone +out of control. The default value is 3. We recommend setting the load value +to 3 times the number of processors.

In the last screen, enter the Email address of the +person to be warned and the Email server to use (local +or on the Internet).


[30] You can start this tool from the command line, by typing logdrake as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/lsnetdrake.html b/mcc/6/sq/content/lsnetdrake.html new file mode 100644 index 00000000..4f9fdf2b --- /dev/null +++ b/mcc/6/sq/content/lsnetdrake.html @@ -0,0 +1,40 @@ + + + + + Display Available NFS And SMB Shares

Display Available NFS And SMB Shares

lsnetdrake

This tool [52] can only be started and used +on the command line.

This page hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Documentation +team. Thanking you in advance.


[52] You can start this tool from the command line, by typing lsnetdrake. +

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/lspcidrake.html b/mcc/6/sq/content/lspcidrake.html new file mode 100644 index 00000000..4cf825ac --- /dev/null +++ b/mcc/6/sq/content/lspcidrake.html @@ -0,0 +1,40 @@ + + + + + Display Your PCI, USB and PCMCIA Information

Display Your PCI, USB and PCMCIA Information

lspcidrake

This tool [53] can only be started and used +on the command line. It will give some more information if used under root.

lspcidrake gives the list of all the connected devices to the computer (USB, +PCI and PCMCIA) and the used drivers. It needs the ldetect and ldetect-lst +packages to work.

With the -v option, lspcidrake adds the vendor and device identifications.

lspcidrake often generates very long lists, so, to find an information, it +is often used in a pipeline with the grep command, like in these examples:

Information about the graphic card;

lspcidrake | grep VGA

Informacion në lidhje me rrjetin

lspcidrake | grep -i network

-i to ignore case distinctions.

In this screenshot below, you can see the action of the -v option for +lspcidrake and the -i option for grep.

There is another tool that gives information about the hardware, it is +called dmidecode (under root)


[53] You can start this tool from the command line, by typing lspcidrake.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër 
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/mageia-2013-200p.png b/mcc/6/sq/content/mageia-2013-200p.png new file mode 100644 index 00000000..a6846683 Binary files /dev/null and b/mcc/6/sq/content/mageia-2013-200p.png differ diff --git a/mcc/6/sq/content/main.js b/mcc/6/sq/content/main.js new file mode 100644 index 00000000..011818d1 --- /dev/null +++ b/mcc/6/sq/content/main.js @@ -0,0 +1,179 @@ +/** + * Miscellaneous js functions for WebHelp + * Kasun Gajasinghe, http://kasunbg.blogspot.com + * David Cramer, http://www.thingbag.net + * + */ + +$(document).ready(function() { + // $("#showHideHighlight").button(); //add jquery button styling to 'Go' button + //Generate tabs in nav-pane with JQuery + $(function() { + $("#tabs").tabs({ + cookie: { + // store cookie for 2 days. + expires: 2 + } + }); + }); + + //Generate the tree + $("#ulTreeDiv").css("display","block"); + $("#tree").treeview({ + collapsed: true, + animated: "medium", + control: "#sidetreecontrol", + persist: "cookie" + }); + + //after toc fully styled, display it. Until loading, a 'loading' image will be displayed + $("#tocLoading").css("display", "none"); + //$("#ulTreeDiv").attr("style","display:block;"); + + //.searchButton is the css class applied to 'Go' button + $(function() { + $("button", ".searchButton").button(); + + $("button", ".searchButton").click(function() {return false;}); + }); + + //'ui-tabs-1' is the cookie name which is used for the persistence of the tabs.(Content/Search tab) + if ($.cookie('ui-tabs-1') === '1') { //search tab is visible + if ($.cookie('textToSearch') != undefined && $.cookie('textToSearch').length > 0) { + document.getElementById('textToSearch').value = $.cookie('textToSearch'); + Verifie('diaSearch_Form'); + searchHighlight($.cookie('textToSearch')); + //$("#showHideHighlight").css("display","block"); + } + } + + syncToc(); //Synchronize the toc tree with the content pane, when loading the page. + //$("#doSearch").button(); //add jquery button styling to 'Go' button +}); + +/** + * Synchronize with the tableOfContents + */ +function syncToc(){ + var a = document.getElementById("webhelp-currentid"); + if (a != undefined) { + var b = a.getElementsByTagName("span")[0]; + + + if (b != undefined) { + //Setting the background for selected node. + //b.setAttribute("style", "color: white; background-color: #a7a9ac;"); + b.style.color = "#FFFFFF"; + b.style.backgroundColor = "#a7a9ac"; + } + + //shows the node related to current content. + //goes a recursive call from current node to ancestor nodes, displaying all of them. + while (a.parentNode && a.parentNode.nodeName) { + var parentNode = a.parentNode; + var nodeName = parentNode.nodeName; + + if (nodeName.toLowerCase() == "ul") { + parentNode.style.display = "block"; + + // Expand the current entry + var u = a.getElementsByTagName("ul")[0]; + if (u) { + u.style.display = "block"; + } + } else if (nodeName.toLocaleLowerCase() == "li") { + parentNode.setAttribute("class", "collapsable"); + parentNode.firstChild.setAttribute("class", "hitarea collapsable-hitarea "); + } + a = parentNode; + } + + if (b != undefined) { + b.scrollIntoView(); + } + } +} + +/** + * Code for Show/Hide TOC + * + */ +function showHideToc() { + var showHideButton = $("#showHideButton"); + var leftNavigation = $("#leftnavigation"); + var content = $("#content"); + + if (showHideButton != undefined && showHideButton.hasClass("pointLeft")) { + //Hide TOC + showHideButton.removeClass('pointLeft').addClass('pointRight'); + content.css("margin", "0 0 0 0"); + leftNavigation.css("display","none"); + showHideButton.attr("title", "Show table of contents"); + } else { + //Show the TOC + showHideButton.removeClass('pointRight').addClass('pointLeft'); + content.css("margin", "0 0 0 315px"); + leftNavigation.css("display","block"); + showHideButton.attr("title", "Hide table of contents"); + } +} + +/** + * Code for searh highlighting + */ +var highlightOn = true; +function searchHighlight(searchText) { + highlightOn = true; + if (searchText != undefined) { + var wList; + var sList = new Array(); //stem list + //Highlight the search terms + searchText = searchText.toLowerCase().replace(/<\//g, "_st_").replace(/\$_/g, "_di_").replace(/\.|%2C|%3B|%21|%3A|@|\/|\*/g, " ").replace(/(%20)+/g, " ").replace(/_st_/g, " + + + + Ndezje

Ndezje

In this screen you can choose between several tools to configure your boot +steps. Click on a link below to learn more.

Konfiguro hapat ndezës

  1. seksioni i quajtur “Konfiguro hyrje automatike për të hyrë automatikisht”

  2. seksioni i quajtur “Ndërto ndezjen e sistemit”

  3. seksioni i quajtur “Ndërto menaxhuesin e ekranit”

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa   Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/mcc-hardware.html b/mcc/6/sq/content/mcc-hardware.html new file mode 100644 index 00000000..e327fa5d --- /dev/null +++ b/mcc/6/sq/content/mcc-hardware.html @@ -0,0 +1,38 @@ + + + + + Pjesë-elektronike

Pjesë-elektronike

Në këtë ekran ju mund të zgjidhni midis disa mjeteve për konfigurimin +pjesët-elektronike tuaja. Klikoni mbi një lidhje më poshtë për të mësuar më +shumë.

  1. Menaxho pjesët-elektronike tuaja

    1. seksioni i quajtur “Hardware configuration” = Browse and configure +hardware

    2. seksioni i quajtur “Konfigurimi zërit”

  2. Konfiguro grafiken

    1. seksioni i quajtur “3D Desktop Effects” = Configure 3D Desktop effects

    2. seksioni i quajtur “Ndërto grafikën e serverit”

  3. Konfiguro miun dhe tastierën

    1. seksioni i quajtur “Set up the Keyboard Layout”

    2. seksioni i quajtur “Ndërto pajisjen tregues (miu, pjesë-prekës)”

  4. Konfiguro printim dhe skanim

    1. seksioni i quajtur “Instalo dhe konfiguro një printer” = Set up the printer(s), +the print job queues, ...

    2. seksioni i quajtur “Konfiguro skanerin”

  5. Të tjerët

    1. seksioni i quajtur “Vendos një UPS për monitorimin e energjisë”

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa   Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/mcc-intro.html b/mcc/6/sq/content/mcc-intro.html new file mode 100644 index 00000000..114cb956 --- /dev/null +++ b/mcc/6/sq/content/mcc-intro.html @@ -0,0 +1,40 @@ + + + + + Rreth Manualit për Qendrën e Kontrollit Mageia

Rreth Manualit për Qendrën e Kontrollit Mageia

Qendra e Kontrollit Mageia (MCC) ka tetë opsionet e ndryshme ose tabs për të +zgjedhur në kolonën e majtë, dhe madje edhe dhjetë nëse paketa drakwizard +është e instaluar. Secila prej këtyre skedave jep një grup të ndryshme të +mjeteve që mund të zgjidhen në panelin e madh të djathtë.

Dhjetë Kapitujt në vijim janë për ato dhjetë opsionet dhe mjetet ne lidhje +me to.

Kapitulli i fundit ka të bëjë me disa mjete të tjera Mageia, që nuk mund të +zgjidhen në ndonjë nga MCC-tabs.

Titujt e faqeve shpesh do të jenë të njëjtë si titujt e mjet në ekran.

Ka edhe një tabelë kërkimi në dispozicion, e cila ju mund të hyni duke +klikuar mbi tabelën "Kërko" në kolonën e majtë.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa   Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/mcc-localdisks.html b/mcc/6/sq/content/mcc-localdisks.html new file mode 100644 index 00000000..b1a3c9aa --- /dev/null +++ b/mcc/6/sq/content/mcc-localdisks.html @@ -0,0 +1,35 @@ + + + + + Hard Disqet Vendor

Hard Disqet Vendor

In this screen you can choose between several tools to manage or share your +local disks. Click on a link below to learn more.

Hard Disqet Vendor

  1. seksioni i quajtur “Menaxho ndarjet e hardiskut”

  2. seksioni i quajtur “Gdhendësi CD/DVD”

  3. seksioni i quajtur “Shpërndaj ndarjet e hardiskut tuaj”

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa   Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/mcc-network.html b/mcc/6/sq/content/mcc-network.html new file mode 100644 index 00000000..b8c3423c --- /dev/null +++ b/mcc/6/sq/content/mcc-network.html @@ -0,0 +1,35 @@ + + + + + Rrjeti dhe Interneti

Rrjeti dhe Interneti

Në këtë ekran ju mund të zgjidhni në mes të disa mjeteve të rrjetit. Klikoni +mbi një lidhje më poshtë për të mësuar më shumë.

  1. Menaxhoni pajisjet e rrjetit tuaj

    1. seksioni i quajtur “Qendra Rrjetit”

    2. seksioni i quajtur “Ndërto një ndërfaqe rrjeti (LAN, ISDN, ADSL, ...)”

    3. seksioni i quajtur “Hiq një Lidhje”

  2. Personalizoni dhe Siguroni rrjetin tuaj

    1. seksioni i quajtur “Proxy”

    2. seksioni i quajtur “Ndaj linjën e internetit me kompjuterët e tjerë vendas”

    3. seksioni i quajtur “Menaxho profile të ndryshme rrjetit”

    4. seksioni i quajtur “Configure VPN Connection to secure network access”

  3. Të tjerët

    1. seksioni i quajtur “Përcaktimi i pritësit”

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa   Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/mcc-networkservices.html b/mcc/6/sq/content/mcc-networkservices.html new file mode 100644 index 00000000..7980bf90 --- /dev/null +++ b/mcc/6/sq/content/mcc-networkservices.html @@ -0,0 +1,37 @@ + + + + + Shërbimet e Rrjetit

Shërbimet e Rrjetit

This screen and the one for Sharing are only visible if +the drakwizard package is installed. You can choose +between several tools to set up different servers. Click on a link below or +on seksioni i quajtur “Shpërndaj”to learn more.

Shërbimet e Rrjetit

  1. seksioni i quajtur “Konfiguro DHCP”

  2. seksioni i quajtur “Konfiguro DNS”

  3. seksioni i quajtur “Konfiguro proxy”

  4. seksioni i quajtur “Konfiguro orën”

  5. seksioni i quajtur “Konfigurimi demonin OpenSSH”

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa   Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/mcc-networksharing.html b/mcc/6/sq/content/mcc-networksharing.html new file mode 100644 index 00000000..e3f0576b --- /dev/null +++ b/mcc/6/sq/content/mcc-networksharing.html @@ -0,0 +1,36 @@ + + + + + Shpërndarës Rrjeti

Shpërndarës Rrjeti

Në këtë ekran ju mund të zgjidhni midis disa mjete për ndarjen drejtuesve +dhe skedarëve. Klikoni mbi një lidhje më poshtë për të mësuar më shumë.

  1. Konfiguro shpërndarësin Windows(R)

    1. seksioni i quajtur “Hyrje në shpërndarjen e drejtuesve dhe skedarëve Windows (SMB)”

    2. seksioni i quajtur “Share directories and drives with Samba” = Share drives and +directories with Windows (SMB) systems

  2. Konfigurimi shpërndarësve NFS

    1. seksioni i quajtur “Hyrje e shpërndarjes drejtuese dhe skedarëve të NFS”

    2. seksioni i quajtur “Shpërndaj drejtuesit dhe skedat duke përdorur NFS”

  3. Konfigurimi shpërndarësin WebDAV

    1. seksioni i quajtur “Hyrje në shpërndarjen e drejtuesve dhe skedarëve WebDAV”

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa   Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/mcc-security.html b/mcc/6/sq/content/mcc-security.html new file mode 100644 index 00000000..d7b3007c --- /dev/null +++ b/mcc/6/sq/content/mcc-security.html @@ -0,0 +1,36 @@ + + + + + Siguria

Siguria

Në këtë ekran ju mund të zgjidhni në mes të disa mjeteve të +sigurisë. Klikoni mbi një lidhje më poshtë për të mësuar më shumë.

Siguria

  1. seksioni i quajtur “MSEC: System Security and Audit” = Configure system security, permissions +and audit

  2. seksioni i quajtur “Ndërto murin-mbrojtës tuaj personal”

  3. seksioni i quajtur “Konfiguro vërtetimin për veglat Mageia”

  4. seksioni i quajtur “Ndërtim i avancuar për ndërfaqen e rrjetit dhe muri-mbrojtës”

  5. seksioni i quajtur “Kontrolli Prindëror”

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa   Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/mcc-sharing.html b/mcc/6/sq/content/mcc-sharing.html new file mode 100644 index 00000000..f16eb3a4 --- /dev/null +++ b/mcc/6/sq/content/mcc-sharing.html @@ -0,0 +1,37 @@ + + + + + Shpërndaj

Shpërndaj

This screen and the one for Network Services are only +visible if the drakwizard package is installed. You can +choose between several tools to set up different servers. Click on a link +below or on seksioni i quajtur “Shërbimet e Rrjetit”to learn more.

Shpërndaj

  1. seksioni i quajtur “Konfiguro FTP”

  2. seksioni i quajtur “Configure webserver”

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa   Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/mcc-system.html b/mcc/6/sq/content/mcc-system.html new file mode 100644 index 00000000..8e7d0182 --- /dev/null +++ b/mcc/6/sq/content/mcc-system.html @@ -0,0 +1,36 @@ + + + + + Sistemi

Sistemi

Në këtë ekran ju mund të zgjidhni në mes të disa sistemeve dhe mjeteve të +administrimit. Klikoni mbi një lidhje më poshtë për të mësuar më shumë.

  1. Menaxho shërbimet e sistemit

    1. seksioni i quajtur “Vërtetimi”

    2. seksioni i quajtur “Menaxho shërbimet e sistemit duke mundësuar ose gjymtuar ato”

    3. seksioni i quajtur “Menaxho, shto dhe hiq fontet. Importo fontet Windows(TM)”

  2. Vendndodhja

    1. seksioni i quajtur “Menaxho datën dhe kohën”

    2. seksioni i quajtur “Menaxho lokalizimin për sistemin tuaj”

  3. Mjetet e administrimit

    1. seksioni i quajtur “Shiko dhe kërko shënimet e sistemit”

    2. seksioni i quajtur “Hap panel komandimi si administrator”

    3. seksioni i quajtur “Përdoruesit dhe grupet” = Menaxho përdoruesit në +sistem

    4. seksioni i quajtur “Importo Windows(TM) dokumente dhe konfigurime”

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa   Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/mgaapplet-config.html b/mcc/6/sq/content/mgaapplet-config.html new file mode 100644 index 00000000..9c8fe7eb --- /dev/null +++ b/mcc/6/sq/content/mgaapplet-config.html @@ -0,0 +1,42 @@ + + + + + Konfiguro frekuencën e përditësimeve

Konfiguro frekuencën e përditësimeve

mgaapplet-config

This tool[3] is present in the Mageia +Control Center under the tab Software +management. It is also available by a right click / +Updates configuration on the red icon in the system tray.

The first slider allows you to change how frequently Mageia will check for +updates and the second the delay after booting before the first check. The +check box gives you the option to be warned when a new Mageia release is +out.


[3] You can start this tool from the command line, by typing mgaapplet-config as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/mousedrake.html b/mcc/6/sq/content/mousedrake.html new file mode 100644 index 00000000..36da95ea --- /dev/null +++ b/mcc/6/sq/content/mousedrake.html @@ -0,0 +1,41 @@ + + + + + Ndërto pajisjen tregues (miu, pjesë-prekës)

Ndërto pajisjen tregues (miu, pjesë-prekës)

mousedrake

This tool[16] is present in the Mageia +Control Center under the tab Hardware.

As you must have a mouse to install Mageia, that one is already installed by +Drakinstall. This tool allows installation of another mouse.

The mice are sorted by connection type and then by model. Select your mouse +and click on OK. Most of the time "Universal / Any +PS/2 & USB mice" is suitable for a recent mouse. The new mouse is +immediately taken into account.


[16] You can start this tool from the command line, by typing mousedrake as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/msecgui.html b/mcc/6/sq/content/msecgui.html new file mode 100644 index 00000000..3b01ff5e --- /dev/null +++ b/mcc/6/sq/content/msecgui.html @@ -0,0 +1,148 @@ + + + + + MSEC: System Security and Audit

MSEC: System Security and Audit

msecgui

Prezantim

msecgui[43] is a graphic user interface for +msec that allows to configure your system security according to two +approaches:

  • It sets the system behaviour, msec imposes modifications to the system to +make it more secure.

  • It carries on periodic checks automatically on the system in order to warn +you if something seems dangerous.

msec uses the concept of "security levels" which are intended to configure a +set of system permissions, which can be audited for changes or +enforcement. Several of them are proposed by Mageia, but you can define your +own customised security levels.

Overview tab

See the screenshot above

The first tab takes up the list of the different security tools with a +button on the right side to configure them:

  • Firewall, also found in the MCC / Security / Set up your personal firewall

  • Updates, also found in MCC / Software Management / Update your system

  • msec vetë me disa informacione:

    • enabled or not

    • the configured Base security level

    • the date of the last Periodic checks and a button to see a detailed report +and another button to execute the checks just now.

Security settings tab

A click on the second tab or on the Security +Configure button leads to the same screen shown +below.

Basic security tab

+ Nivele sigurie: +

After having checked the box Enable MSEC tool, this tab +allows you by a double click to choose the security level that appears then +in bold. If the box is not checked, the level « none » is applied. The +following levels are available:

  1. Level none. This level is intended if you +do not want to use msec to control system security, and prefer tuning it on +your own. It disables all security checks and puts no restrictions or +constraints on system configuration and settings. Please use this level only +if you are knowing what you are doing, as it would leave your system +vulnerable to attack.

  2. Level standard. This is the default +configuration when installed and is intended for casual users. It +constrains several system settings and executes daily security checks which +detect changes in system files, system accounts, and vulnerable directory +permissions. (This level is similar to levels 2 and 3 from past msec +versions).

  3. Level secure. This level is intended when +you want to ensure your system is secure, yet usable. It further restricts +system permissions and executes more periodic checks. Moreover, access to +the system is more restricted. (This level is similar to levels 4 (High) and +5 (Paranoid) from old msec versions).

  4. Besides those levels, different task-oriented security are also provided, +such as the fileserver , webserver and netbook levels. Such levels attempt to pre-configure +system security according to the most common use cases.

  5. The last two levels called audit_daily and +audit_weekly are not really security levels +but rather tools for periodic checks only.

These levels are saved in +etc/security/msec/level.<levelname>. You can define +your own customised security levels, saving them into specific files called +level.<levelname>, placed into the folder +etc/security/msec/. This function is intended for power +users which require a customised or more secure system configuration.

Kujdes

Keep in mind that user-modified parameters take precedence over default +level settings.

+ Alarme sigurie: +

If you check the box Send security alerts by email +to:, the security alerts generated by msec are going to be sent +by local e-mail to the security administrator named in the nearby field. You +can fill either a local user or a complete e-mail address (the local e-mail +and the e-mail manager must be set accordingly). At last, you can receive +the security alerts directly on your desktop. Check the relevant box to +enable it.

Me rëndësi

It is strongly advisable to enable the security alerts option in order to +immediately inform the security administrator of possible security +problems. If not, the administrator will have to regularly check the logs +files available in /var/log/security.

Security options:

Creating a customised level is not the only way to customise the computer +security, it is also possible to use the tabs presented here after to change +any option you want. Current configuration for msec is stored in +/etc/security/msec/security.conf. This file contains +the current security level name and the list of all the modifications done +to the options.

System security tab

This tab displays all the security options on the left side column, a +description in the centre column, and their current values on the right side +column.

To modify an option, double click on it and a new window appears (see +screenshot below). It displays the option name, a short description, the +actual and default values, and a drop down list where the new value can be +selected. Click on the OK button to validate the +choice.

Kujdes

Do not forget when leaving msecgui to save definitively your configuration +using the menu File -> Save the configuration. If you +have changed the settings, msecgui allows you to preview the changes before +saving them.

Siguria rrjetit

This tab displays all the network options and works like the previous tab

Periodic checks tab

Periodic checks aim to inform the security administrator by means of +security alerts of all situations msec thinks potentially dangerous.

This tab displays all the periodic checks done by msec and their frequency +if the box Enable periodic security checks is +checked. Changes are done like in the previous tabs.

Exceptions tab

Sometimes alert messages are due to well known and wanted situations. In +these cases they are useless and wasted time for the administrator. This tab +allows you to create as many exceptions as you want to avoid unwanted alert +messages. It is obviously empty at the first msec start. The screenshot +below shows four exceptions.

To create an exception, click on the Add a rule +button

Select the wanted periodic check in the drop down list called +Check and then, enter the +Exception in the text area. Adding an exception is +obviously not definitive, you can either delete it using the +Delete button of the Exceptions +tab or modify it with a double clicK.

Autorizimet

This tab is intended for file and directory permissions checking and +enforcement.

Like for the security, msec owns different permissions levels (standard, +secure, ..), they are enabled accordingly with the chosen security +level. You can create your own customised permissions levels, saving them +into specific files called perm.<levelname> placed +into the folder etc/security/msec/ . This function is +intended for power users which require a customised configuration. It is +also possible to use the tab presented here after to change any permission +you want. Current configuration is stored in +/etc/security/msec/perms.conf. This file contains the +list of all the modifications done to the permissions.

Default permissions are visible as a list of rules (a rule per line). You +can see on the left side, the file or folder concerned by the rule, then the +owner, then the group and then the permissions given by the rule. If, for a +given rule:

  • the box Enforce is not checked, msec only checks if the +defined permissions for this rule are respected and sends an alert message +if not, but does not change anything.

  • the box Enforce is checked, then msec will rule the +permissions respect at the first periodic check and overwrite the +permissions.

Me rëndësi

For this to work, the option CHECK_PERMS in the Periodic check tab must be configured accordingly.

To create a new rule, click on the Add a rule button +and fill the fields as shown in the example below. The joker * is allowed in +the File field. “current” means no modification.

Click on the OK button to validate the choice and do +not forget when leaving to save definitively your configuration using the +menu File -> Save the configuration. If you have changed +the settings, msecgui allows you to preview the changes before saving them.

Shënim

It is also possible to create or modify the rules by editing the +configuration file /etc/security/msec/perms.conf. +

Kujdes

Changes in the Permission tab (or directly +in the configuration file) are taken into account at the first periodic +check (see the option CHECK_PERMS in the Periodic +checks tab). If you want them to be taken immediately into +account, use the msecperms command in a console with root rights. You can +use before, the msecperms -p command to know the permissions that will be +changed by msecperms.

Kujdes

Do not forget that if you modify the permissions in a console or in a file +manager, for a file where the box Enforce is checked +in the Permissions tab , msecgui will write +the old permissions back after a while, accordingly to the configuration of +the options CHECK_PERMS and CHECK_PERMS_ENFORCE in the Periodic Checks tab .


[43] You can start this tool from the command line, by typing msecgui as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Mbrapa Sipër Vazhdo
 Fillimi 
loading table of contents...
diff --git a/mcc/6/sq/content/nwSearchFnt.js b/mcc/6/sq/content/nwSearchFnt.js new file mode 100644 index 00000000..13327867 --- /dev/null +++ b/mcc/6/sq/content/nwSearchFnt.js @@ -0,0 +1,524 @@ +/*---------------------------------------------------------------------------- + * JavaScript for webhelp search + *---------------------------------------------------------------------------- + This file is part of the webhelpsearch plugin for DocBook WebHelp + Copyright (c) 2007-2008 NexWave Solutions All Rights Reserved. + www.nexwave.biz Nadege Quaine + http://kasunbg.blogspot.com/ Kasun Gajasinghe + */ + +//string initialization +var htmlfileList = "htmlFileList.js"; +var htmlfileinfoList = "htmlFileInfoList.js"; +var useCJKTokenizing = false; + +/* Cette fonction verifie la validite de la recherche entrre par l utilisateur */ +function Verifie(ditaSearch_Form) { + + // Check browser compatibitily + if (navigator.userAgent.indexOf("Konquerer") > -1) { + + alert(txt_browser_not_supported); + return; + } + + + var expressionInput = document.ditaSearch_Form.textToSearch.value; + //Set a cookie to store the searched keywords + $.cookie('textToSearch', expressionInput); + + + if (expressionInput.length < 1) { + + // expression is invalid + alert(txt_enter_at_least_1_char); + // reactive la fenetre de search (utile car cadres) + document.ditaSearch_Form.textToSearch.focus(); + } + else { + + // Effectuer la recherche + Effectuer_recherche(expressionInput); + + // reactive la fenetre de search (utile car cadres) + document.ditaSearch_Form.textToSearch.focus(); + } +} + +var stemQueryMap = new Array(); // A hashtable which maps stems to query words + +/* This function parses the search expression, loads the indices and displays the results*/ +function Effectuer_recherche(expressionInput) { + + /* Display a waiting message */ + //DisplayWaitingMessage(); + + /*data initialisation*/ + var searchFor = ""; // expression en lowercase et sans les caracte res speciaux + //w = new Object(); // hashtable, key=word, value = list of the index of the html files + scriptLetterTab = new Scriptfirstchar(); // Array containing the first letter of each word to look for + var wordsList = new Array(); // Array with the words to look for + var finalWordsList = new Array(); // Array with the words to look for after removing spaces + var linkTab = new Array(); + var fileAndWordList = new Array(); + var txt_wordsnotfound = ""; + + + /*nqu: expressionInput, la recherche est lower cased, plus remplacement des char speciaux*/ + searchFor = expressionInput.toLowerCase().replace(/<\//g, "_st_").replace(/\$_/g, "_di_").replace(/\.|%2C|%3B|%21|%3A|@|\/|\*/g, " ").replace(/(%20)+/g, " ").replace(/_st_/g, "= 0; i--) { + if (fileAndWordList[i] != undefined) { + linkTab.push("

" + txt_results_for + " " + "" + fileAndWordList[i][0].motslisteDisplay + "" + "

"); + + linkTab.push(""); + } + } + } + + var results = ""; + if (linkTab.length > 0) { + /*writeln ("

" + txt_results_for + " " + "" + cleanwordsList + "" + "
"+"

");*/ + results = "

"; + //write("