From b9823d00c9c83cfc704f6bebb6757b7c506cd2de Mon Sep 17 00:00:00 2001 From: filip Date: Wed, 1 Jul 2015 21:04:27 +0200 Subject: Adding an upload date to the EN MCC --- mcc/5/en/content/MageiaUpdate.html | 2 +- mcc/5/en/content/XFdrake.html | 2 +- mcc/5/en/content/diskdrake--dav.html | 2 +- mcc/5/en/content/diskdrake--fileshare.html | 2 +- mcc/5/en/content/diskdrake--nfs.html | 2 +- mcc/5/en/content/diskdrake--removable.html | 2 +- mcc/5/en/content/diskdrake--smb.html | 2 +- mcc/5/en/content/drak3d.html | 2 +- mcc/5/en/content/drakauth.html | 2 +- mcc/5/en/content/drakboot--boot.html | 2 +- mcc/5/en/content/drakboot.html | 2 +- mcc/5/en/content/drakbug.html | 2 +- mcc/5/en/content/drakbug_report.html | 2 +- mcc/5/en/content/drakclock.html | 2 +- mcc/5/en/content/drakconnect--del.html | 2 +- mcc/5/en/content/drakconnect.html | 2 +- mcc/5/en/content/drakconsole.html | 2 +- mcc/5/en/content/drakdisk.html | 2 +- mcc/5/en/content/drakedm.html | 2 +- mcc/5/en/content/drakfirewall.html | 2 +- mcc/5/en/content/drakfont.html | 2 +- mcc/5/en/content/drakguard.html | 2 +- mcc/5/en/content/drakgw.html | 2 +- mcc/5/en/content/drakhosts.html | 2 +- mcc/5/en/content/drakinvictus.html | 2 +- mcc/5/en/content/draknetcenter.html | 2 +- mcc/5/en/content/draknetprofile.html | 2 +- mcc/5/en/content/draknfs.html | 2 +- mcc/5/en/content/drakproxy.html | 2 +- mcc/5/en/content/drakrpm-edit-media.html | 2 +- mcc/5/en/content/draksambashare.html | 2 +- mcc/5/en/content/draksec.html | 2 +- mcc/5/en/content/draksnapshot-config.html | 2 +- mcc/5/en/content/draksound.html | 2 +- mcc/5/en/content/drakups.html | 2 +- mcc/5/en/content/drakvpn.html | 2 +- mcc/5/en/content/drakwizard_apache2.html | 2 +- mcc/5/en/content/drakwizard_bind.html | 2 +- mcc/5/en/content/drakwizard_dhcp.html | 2 +- mcc/5/en/content/drakwizard_ntp.html | 2 +- mcc/5/en/content/drakwizard_proftpd.html | 2 +- mcc/5/en/content/drakwizard_squid.html | 2 +- mcc/5/en/content/drakwizard_sshd.html | 2 +- mcc/5/en/content/drakxservices.html | 2 +- mcc/5/en/content/harddrake2.html | 2 +- mcc/5/en/content/index.html | 2 +- mcc/5/en/content/keyboarddrake.html | 2 +- mcc/5/en/content/localedrake.html | 2 +- mcc/5/en/content/logdrake.html | 2 +- mcc/5/en/content/lsnetdrake.html | 2 +- mcc/5/en/content/lspcidrake.html | 2 +- mcc/5/en/content/mcc-boot.html | 2 +- mcc/5/en/content/mcc-hardware.html | 2 +- mcc/5/en/content/mcc-intro.html | 2 +- mcc/5/en/content/mcc-localdisks.html | 2 +- mcc/5/en/content/mcc-network.html | 2 +- mcc/5/en/content/mcc-networkservices.html | 2 +- mcc/5/en/content/mcc-networksharing.html | 2 +- mcc/5/en/content/mcc-security.html | 2 +- mcc/5/en/content/mcc-sharing.html | 2 +- mcc/5/en/content/mcc-system.html | 2 +- mcc/5/en/content/mgaapplet-config.html | 2 +- mcc/5/en/content/mousedrake.html | 2 +- mcc/5/en/content/msecgui.html | 2 +- mcc/5/en/content/otherMageiaTools.html | 2 +- mcc/5/en/content/rpmdrake.html | 2 +- mcc/5/en/content/scannerdrake.html | 2 +- mcc/5/en/content/software-management.html | 2 +- mcc/5/en/content/system-config-printer.html | 2 +- mcc/5/en/content/transfugdrake.html | 2 +- mcc/5/en/content/userdrake.html | 2 +- 71 files changed, 71 insertions(+), 71 deletions(-) (limited to 'mcc/5') diff --git a/mcc/5/en/content/MageiaUpdate.html b/mcc/5/en/content/MageiaUpdate.html index f10e29b8..507198f3 100644 --- a/mcc/5/en/content/MageiaUpdate.html +++ b/mcc/5/en/content/MageiaUpdate.html @@ -43,7 +43,7 @@ half of the window. The print > before a title means you can click to drop down a text.

Note

When updates are available, an applet in the system tray warns you by displaying this red icon . Just click and enter the user password to - update the system alike.


[2] You can start this tool from the command line, by typing MageiaUpdate or drakrpm-update as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...


[2] You can start this tool from the command line, by typing MageiaUpdate or drakrpm-update as root.

© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...

[39] You can start this tool from the command line, by - typing diskdrake --dav as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...

From now on each user belonging to the fileshare group can select in his/her file manager the directories to be shared, although not all file - managers have this facility.


[42] You can start this tool from the command line, by typing diskdrake --fileshare as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 
loading table of contents...

[37] You can start this tool from the command line, by typing - diskdrake --nfs as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...

Options

Many mount options can be chosen here either directly in the list or via the Advanced submenu. The main are:

user/nouser

user allows an ordinary user (not root) to mount the removable disk, this option involves noexec, nosuid and nodev. The user who - mounted the disk is the only one who can umount it.


[41] You can start this tool from the command line, by typing diskdrake --removable as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 
loading table of contents...

[35] You can start this tool from the command line, by typing - diskdrake --smb as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...

[13] You can start this tool from the command line, by typing - drak3d as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 

Authentication

drakauth

This tool[26] enables you to modify the manner in which you can be recognized as user of the machine or on the net.

By default, information for your authentication is stored in a file on your computer. Modify it only if your network administrator invites you - to do so and give information about that.


[26] You can start this tool from the command line, by typing drakauth as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 

Mageia Bug Report Tool

drakbug

Usually, this tool[50] starts automatically when a Mageia tool crashes. However, it is also possible that, after filing a bug report, you are asked to start this tool to check some of the information it gives, and then provide that in that existing bug report.

If a new bug report needs to be filed and you are not used to doing that, then please read How to report a bug report properly before clicking on the "Report" button.

In case the bug has already been filed by someone else (the error message that drakbug gave will be the same, then), it is useful to add a comment to that existing report that you saw the bug, too.


[50] You can start this tool from the command line, by typing drakbug.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 

Mageia Bug Report Tool

drakbug

Usually, this tool[50] starts automatically when a Mageia tool crashes. However, it is also possible that, after filing a bug report, you are asked to start this tool to check some of the information it gives, and then provide that in that existing bug report.

If a new bug report needs to be filed and you are not used to doing that, then please read How to report a bug report properly before clicking on the "Report" button.

In case the bug has already been filed by someone else (the error message that drakbug gave will be the same, then), it is useful to add a comment to that existing report that you saw the bug, too.


[50] You can start this tool from the command line, by typing drakbug.

© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 
loading table of contents...

This command collects the followi instead with: journalctl -a | tail -n5000 > journalctl5000.txt.


[51] You can start this tool from the command line, by typing drakbug_report as - root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 

Remove a connection

drakconnect --del

Here, you can delete a network interface[21].

Click on the drop down menu, choose the one you want to remove and then click next.

You'll see a message that the network interface has been deleted successfully.


[21] You can also start this tool from the -command line, by typing drakconnect --del as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...

With the advanced button, you can specify:

The last step allows you to specify if the connection is to start immediately or not.


[20] You can start this tool from the command line, by typing - drakconnect as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 

Open a console as administrator

drakconsole

This tool[31] gives you access to a console which is directly opened as - root. We do not think that you need more information about that.


[31] You can start this tool from the command line, by typing drakconsole as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...
Block Programs Tab

Block Defined Applications: Enables the use of ACL to restrict access to specific applications. Insert the path to the applications you wish to block.

Unblock Users list: Users listed on the - right hand side will not be subject to acl blocking.


[46] You can start this tool from the command line, by typing drakguard as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...

Stop connection sharing

If you want to stop sharing the connection on the Mageia computer, launch the tool. It will offer to reconfigure the connection or to stop the sharing.


[23] You can start this tool from the command line, by typing - drakgw as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 

Advanced setup for network interfaces and firewall

drakinvictus

This page hasn't been written yet for lack of resources. If you think you can write this help, please contact the Doc team. Thanking you in advance.

You can start this tool from the command line, by typing drakinvictus as - root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...

The Advanced Settings button

This section hasn't been written yet for lack of resources. If you think you can write this help, please contact the Doc - team. Thanking you in advance.


[19] You can start this tool from the command line, by typing draknetcenter as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...

[19] You can start this tool from the command line, by typing draknetcenter as root.

© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 

Manage different network profiles

draknetprofile

This page hasn't been written yet for lack of resources. If you think you can write this help, please contact the Doc team. Thanking you in advance.

You can start this tool from the command line, by typing draknetprofile as - root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 

Menu entries

So far the list has at least one entry.

File|Write conf

Save the current configuration.

NFS Server|Restart

The server is stopped and restarted with the current configuration files.

NFS Server|Reload

The configuration displayed is reloaded from the current configuration files.


[38] You can start this tool from the command line, by typing - draknfs as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 
loading table of contents...

[4] You can start this tool from the command line, by typing drakrpm-edit-media as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...

[4] You can start this tool from the command line, by typing drakrpm-edit-media as root.

© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 
loading table of contents...

Printers share

Samba also allows you to share printers.

Samba users

In this tab, you can add users who are allowed to access the shared resources when authentication is required. You can add users from


[36] You can start this tool from the command line, by - typing draksambashare as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...

[45] You can start this tool from the command line, by typing draksec as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 

Set up a UPS for power monitoring

drakups

This page hasn't been written yet for lack of resources. If you think you can write this help, please contact the Doc team. Thanking you in advance.

You can start this tool from the command line, by typing drakups as - root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...

[24] You can start this tool from the command line, by typing - drakvpn as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 

[6] You can start this tool from the command line, by typing drakwizard apache2 as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 

[6] You can start this tool from the command line, by typing drakwizard apache2 as root.

© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 

Configure DNS

drakwizard bind

This page hasn't been written yet for lack of resources. If you think you can write this help, please contact the Doc team. Thanking you in advance.

You can start this tool from the command line, by typing drakwizard bind as - root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...

[7] You can start this tool from the command line, by typing drakwizard dhcp as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 
loading table of contents...

[9] You can start this tool from the command line, by typing drakwizard ntp as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 

[5] You can start this tool from the command line, by typing drakwizard proftpd as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 

[5] You can start this tool from the command line, by typing drakwizard proftpd as root.

© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 
loading table of contents...

[8] You can start this tool from the command line, by typing drakwizard squid as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 

[10] You can start this tool from the command line, by typing drakwizard sshd as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 

[10] You can start this tool from the command line, by typing drakwizard sshd as root.

© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 

Manage system services by enabling or disabling them

drakxservices

This page hasn't been written yet for lack of resources. If you think you can write this help, please contact the Doc team. Thanking you in advance.

You can start this tool from the command line, by typing drakxservices as - root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...

[11] You can start this tool from the command line, by typing harddrake2 as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
   Next
loading table of contents...

Keyboard Type

This menu lets you select the type of keyboard you are using. If you are unsure of which to choose, it is best to leave it as the default type.


[15] You can start this tool from the command line, by typing - keyboarddrake as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...

[29] You can also start this tool from the command line, by typing localedrake as root. -

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...

[30] You can start this tool from the command line, by typing logdrake as root.

© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Prev Up Next
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Prev Up 
 Home 
loading table of contents...
© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Prev Up 
 Home 

Boot

In this screen you can choose between several tools to configure your boot steps. Click on a link below to learn more.

Configure boot steps

  1. the section called “Set up autologin to automatically log - in”

  2. the section called “Set up boot system”

  3. the section called “Set up display manager”

© Mageia
CC BY-SA 3.0
Prev   Next
 Home 
loading table of contents...

  • Configure mouse and keyboard

    1. the section called “Set up the Keyboard Layout”

    2. the section called “Set up the pointer device (mouse, touchpad)”

  • Configure printing and scanning

    1. the section called “Install and configure a printer” = Set up the - printer(s), the print job queues, ...

    2. the section called “Set up scanner”

  • Others

    1. the section called “Set up a UPS for power monitoring”

    • © Mageia
    CC BY-SA 3.0
    Prev   Next
     Home 
    loading table of contents...
    © Mageia
    CC BY-SA 3.0
    Uploaded on 01/07/2015
    Prev   Next
     Home 
    loading table of contents...
    © Mageia
    CC BY-SA 3.0
    Prev   Next
     Home 

    Security

    In this screen you can choose between several security tools. Click on a link below to learn more.

    Security

    1. the section called “MSEC: System Security and Audit” = Configure system security, permissions and audit

    2. the section called “Set up your personal firewall”

    3. the section called “Configure authentication for Mageia - tools”

    4. the section called “Advanced setup for network interfaces and firewall”

    5. the section called “Parental Controls”

    © Mageia
    CC BY-SA 3.0
    Prev   Next
     Home 
    loading table of contents...
    © Mageia
    CC BY-SA 3.0
    Uploaded on 01/07/2015
    Prev   Next
     Home 
    loading table of contents...
    © Mageia
    CC BY-SA 3.0
    Prev Up Next
     Home 
    loading table of contents...
    © Mageia
    CC BY-SA 3.0
    Uploaded on 01/07/2015
    Prev Up Next
     Home 
    loading table of contents...
    © Mageia
    CC BY-SA 3.0
    Prev Up Next
     Home 

    [43] You can start this tool from the command - line, by typing msecgui as root.

    © Mageia
    CC BY-SA 3.0
    Prev Up Next
     Home 
    loading table of contents...
    © Mageia
    CC BY-SA 3.0
    Prev   Next
     Home 
    loading table of contents...

    [1] You can start this tool from the command line, by typing - rpmdrake as root.

    © Mageia
    CC BY-SA 3.0
    Prev Up Next
     Home 
    loading table of contents...

    [18] You can start this tool from the command line, by typing - scannerdrake as root.

    © Mageia
    CC BY-SA 3.0
    Prev Up Next
     Home 

    Software Management

    In this screen you can choose between several tools for software management. Click on a link below to learn more.

    Software Management

    1. the section called “Software Management (Install and Remove - Software)”

    2. the section called “Software Packages Update” = Update your system

    3. the section called “Configure updates frequency”

    4. the section called “Configure Media” = Configure media sources for install and update

    © Mageia
    CC BY-SA 3.0
    Prev   Next
     Home 
    loading table of contents...

    [17] You can start this tool from the command line, by typing system-config-printer. The root password will be - asked for.

    © Mageia
    CC BY-SA 3.0
    Prev Up Next
     Home 
    loading table of contents...
    © Mageia
    CC BY-SA 3.0
    Prev Up Next
     Home 
    loading table of contents...
    © Mageia
    CC BY-SA 3.0
    Uploaded on 01/07/2015
    Prev Up Next
     Home 
    loading table of contents...
    © Mageia
    CC BY-SA 3.0
    Prev Up Next
     Home