From 026d9b7044943287881ebf7787864b9e4d833624 Mon Sep 17 00:00:00 2001 From: filip Date: Wed, 1 Jul 2015 22:34:42 +0200 Subject: adding the PL mga5 MCC and adding an upload date to it --- mcc/5/pl/content/drakgw.html | 66 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 mcc/5/pl/content/drakgw.html (limited to 'mcc/5/pl/content/drakgw.html') diff --git a/mcc/5/pl/content/drakgw.html b/mcc/5/pl/content/drakgw.html new file mode 100644 index 00000000..22b8f766 --- /dev/null +++ b/mcc/5/pl/content/drakgw.html @@ -0,0 +1,66 @@ + + + + + Udostępnianie połączenia internetowego innym komputerom w sieci

Udostępnianie połączenia internetowego innym komputerom w sieci

drakgw

Principles

This is useful when you have a +computer (3) which has Internet (2) access and is connected also to a local +network (1). You can use computer (3) as a gateway to give that access to +other workstations (5) and (6) in the local network (1). For this, the +gateway must have two interfaces; the first one such as an ethernet card +must be connected to the local network, and the second one (4) connected to +the Internet (2).

The first step is to verify that the network and the access to Internet are +set up, as documented in „Centrum konfiguracji sieci”.

Gateway wizard

The wizard[23] offers successive steps +which are shown below:

  • If the wizard does not detect at least two interfaces, it warns about this +and asks to stop the network and configure the hardware.

  • specify the interface used for the Internet connection. The wizard +automatically suggests one of the interfaces, but you should verify that +what is proposed is correct.

  • specify which interface is used for the Lan access. The wizard also proposes +one, check that this is correct.

  • The wizard proposes parameters for the Lan network, such as IP address, mask +and domain name. Check that these parameters are compatible with the actual +configuration. It is recommended that you accept these values.

  • specify if the computer has to be used as a DNS server. If yes, the wizard +will check that bind is installed. Otherwise, you have to +specify the address of a DNS server.

  • specify if the computer is to be used as a DHCP server. If yes, the wizard +will check that dhcp-server is installed and offer to configure +it, with start and end addresses in the DHCP range.

  • specify if the computer is to be used as a proxy server. If yes, the wizard +will check that squid is installed and offer to configure it, +with the address of the administrator (admin@mydomain.com), name of the +proxy (myfirewall@mydomaincom), the port (3128) and the cache size (100 Mb).

  • The last step allows you to check if the gateway machine is connected to +printers and to share them.

You will be warned about the need to check the firewall if it is active.

Configure the client

If you have configured the gateway machine with DHCP, you only need to +specify in the network configuration tool that you get an address +automatically (using DHCP). The parameters will be obtained when connecting +to the network. This method is valid whatever operating system the client is +using.

If you must manually specify the network parameters, you must in particular +specify the gateway by entering the IP-address of the machine acting as the +gateway.

Stop connection sharing

If you want to stop sharing the connection on the Mageia computer, launch +the tool. It will offer to reconfigure the connection or to stop the +sharing.


[23] You can start this tool from the command line, by typing drakgw as root.

© Mageia
CC BY-SA 3.0
Uploaded on 01/07/2015
Poprzedni Początek rozdziału Następny
 Spis treści 
loading table of contents...
-- cgit v1.2.1