From c5b4562d152d5bdf9fb80f4f62404d69744f7f72 Mon Sep 17 00:00:00 2001 From: Papoteur Date: Sun, 11 Jun 2023 15:20:06 +0200 Subject: Adding or refreshing installer in hr --- installer/9/hr/content/Select-and-use-ISOs.html | 116 ++++ installer/9/hr/content/acceptLicense.html | 40 ++ installer/9/hr/content/addUser.html | 56 ++ installer/9/hr/content/configureServices.html | 36 ++ installer/9/hr/content/diskPartitioning.html | 115 ++++ installer/9/hr/content/draft.png | Bin 0 -> 16150 bytes installer/9/hr/content/exitInstall.html | 38 ++ installer/9/hr/content/firewall.html | 54 ++ installer/9/hr/content/graphicalConfiguration.html | 82 +++ installer/9/hr/content/images/Fdisk.png | Bin 0 -> 22864 bytes installer/9/hr/content/images/Md5sum.png | Bin 0 -> 4219 bytes installer/9/hr/content/images/Root.png | Bin 0 -> 2673 bytes installer/9/hr/content/images/dx-welcome.png | Bin 0 -> 201864 bytes installer/9/hr/content/images/dx-welcome2.png | Bin 0 -> 202729 bytes .../content/images/dx2-add_supplemental_media.png | Bin 0 -> 41691 bytes .../9/hr/content/images/dx2-chooseDesktop.png | Bin 0 -> 47725 bytes .../9/hr/content/images/dx2-chooseMountpoints.png | Bin 0 -> 42494 bytes .../hr/content/images/dx2-choosePackageGroups.png | Bin 0 -> 55812 bytes .../9/hr/content/images/dx2-choosePackagesTree.png | Bin 0 -> 50218 bytes .../9/hr/content/images/dx2-configureServices.png | Bin 0 -> 42261 bytes .../hr/content/images/dx2-configureTimezoneUTC.png | Bin 0 -> 40923 bytes .../hr/content/images/dx2-configureX_card_list.png | Bin 0 -> 44451 bytes .../9/hr/content/images/dx2-configureX_chooser.png | Bin 0 -> 37140 bytes .../9/hr/content/images/dx2-configureX_monitor.png | Bin 0 -> 43802 bytes installer/9/hr/content/images/dx2-diskdrake.png | Bin 0 -> 53322 bytes .../9/hr/content/images/dx2-doPartitionDisks.png | Bin 0 -> 110248 bytes installer/9/hr/content/images/dx2-exitInstall.png | Bin 0 -> 87602 bytes .../9/hr/content/images/dx2-formatPartitions.png | Bin 0 -> 36591 bytes .../9/hr/content/images/dx2-installUpdates.png | Bin 0 -> 39575 bytes installer/9/hr/content/images/dx2-license.png | Bin 0 -> 56520 bytes .../9/hr/content/images/dx2-media_selection.png | Bin 0 -> 37830 bytes .../9/hr/content/images/dx2-minimal-install.png | Bin 0 -> 37066 bytes .../9/hr/content/images/dx2-securityLevel.png | Bin 0 -> 45813 bytes .../9/hr/content/images/dx2-selectCountry.png | Bin 0 -> 41492 bytes .../9/hr/content/images/dx2-selectInstallClass.png | Bin 0 -> 38365 bytes .../9/hr/content/images/dx2-selectKeyboard.png | Bin 0 -> 43298 bytes .../9/hr/content/images/dx2-selectLanguage.png | Bin 0 -> 43870 bytes installer/9/hr/content/images/dx2-selectMouse.png | Bin 0 -> 37569 bytes .../9/hr/content/images/dx2-setRootPassword.png | Bin 0 -> 40944 bytes .../9/hr/content/images/dx2-setupBootloader.png | Bin 0 -> 44812 bytes installer/9/hr/content/images/dx2-setupSCSI.png | Bin 0 -> 53034 bytes installer/9/hr/content/images/dx2-soundConfig.png | Bin 0 -> 86355 bytes .../9/hr/content/images/dx2-summaryBottom.png | Bin 0 -> 52715 bytes .../9/hr/content/images/dx2-takeOverHdConfirm.png | Bin 0 -> 34358 bytes installer/9/hr/content/index.html | 38 ++ installer/9/hr/content/installUpdates.html | 36 ++ installer/9/hr/content/installer.html | 78 +++ installer/9/hr/content/locale.html | 50 ++ installer/9/hr/content/loupe.svg | 22 + installer/9/hr/content/main.js | 255 +++++++++ installer/9/hr/content/misc-params.html | 68 +++ installer/9/hr/content/nwSearchFnt.js | 608 +++++++++++++++++++++ installer/9/hr/content/search/default.props | 1 + installer/9/hr/content/search/en-us.props | 45 ++ installer/9/hr/content/search/es-es.props | 179 ++++++ installer/9/hr/content/search/htmlFileInfoList.js | 23 + installer/9/hr/content/search/htmlFileList.js | 24 + installer/9/hr/content/search/index-1.js | 437 +++++++++++++++ installer/9/hr/content/search/index-2.js | 436 +++++++++++++++ installer/9/hr/content/search/index-3.js | 433 +++++++++++++++ installer/9/hr/content/search/ja-jp.props | 1 + installer/9/hr/content/search/nwSearchFnt.js | 513 +++++++++++++++++ installer/9/hr/content/search/punctuation.props | 31 ++ .../9/hr/content/search/stemmers/de_stemmer.js | 247 +++++++++ .../9/hr/content/search/stemmers/en_stemmer.js | 187 +++++++ .../9/hr/content/search/stemmers/fr_stemmer.js | 299 ++++++++++ installer/9/hr/content/securityLevel.html | 42 ++ installer/9/hr/content/selectInstallClass.html | 45 ++ installer/9/hr/content/selectKeyboard.html | 46 ++ installer/9/hr/content/selectLanguage.html | 47 ++ installer/9/hr/content/selectMouse.html | 38 ++ installer/9/hr/content/setupBootloader.html | 73 +++ installer/9/hr/content/setupSCSI.html | 38 ++ installer/9/hr/content/software.html | 88 +++ installer/9/hr/content/soundConfig.html | 42 ++ installer/9/hr/content/uninstall-Mageia.html | 48 ++ installer/9/hr/content/webhelp-custom.css | 369 +++++++++++++ installer/9/hr/content/webhelp-default.css | 92 ++++ installer/9/hr/index.html | 15 + 79 files changed, 5531 insertions(+) create mode 100644 installer/9/hr/content/Select-and-use-ISOs.html create mode 100644 installer/9/hr/content/acceptLicense.html create mode 100644 installer/9/hr/content/addUser.html create mode 100644 installer/9/hr/content/configureServices.html create mode 100644 installer/9/hr/content/diskPartitioning.html create mode 100644 installer/9/hr/content/draft.png create mode 100644 installer/9/hr/content/exitInstall.html create mode 100644 installer/9/hr/content/firewall.html create mode 100644 installer/9/hr/content/graphicalConfiguration.html create mode 100644 installer/9/hr/content/images/Fdisk.png create mode 100644 installer/9/hr/content/images/Md5sum.png create mode 100644 installer/9/hr/content/images/Root.png create mode 100644 installer/9/hr/content/images/dx-welcome.png create mode 100644 installer/9/hr/content/images/dx-welcome2.png create mode 100644 installer/9/hr/content/images/dx2-add_supplemental_media.png create mode 100644 installer/9/hr/content/images/dx2-chooseDesktop.png create mode 100644 installer/9/hr/content/images/dx2-chooseMountpoints.png create mode 100644 installer/9/hr/content/images/dx2-choosePackageGroups.png create mode 100644 installer/9/hr/content/images/dx2-choosePackagesTree.png create mode 100644 installer/9/hr/content/images/dx2-configureServices.png create mode 100644 installer/9/hr/content/images/dx2-configureTimezoneUTC.png create mode 100644 installer/9/hr/content/images/dx2-configureX_card_list.png create mode 100644 installer/9/hr/content/images/dx2-configureX_chooser.png create mode 100644 installer/9/hr/content/images/dx2-configureX_monitor.png create mode 100644 installer/9/hr/content/images/dx2-diskdrake.png create mode 100644 installer/9/hr/content/images/dx2-doPartitionDisks.png create mode 100644 installer/9/hr/content/images/dx2-exitInstall.png create mode 100644 installer/9/hr/content/images/dx2-formatPartitions.png create mode 100644 installer/9/hr/content/images/dx2-installUpdates.png create mode 100644 installer/9/hr/content/images/dx2-license.png create mode 100644 installer/9/hr/content/images/dx2-media_selection.png create mode 100644 installer/9/hr/content/images/dx2-minimal-install.png create mode 100644 installer/9/hr/content/images/dx2-securityLevel.png create mode 100644 installer/9/hr/content/images/dx2-selectCountry.png create mode 100644 installer/9/hr/content/images/dx2-selectInstallClass.png create mode 100644 installer/9/hr/content/images/dx2-selectKeyboard.png create mode 100644 installer/9/hr/content/images/dx2-selectLanguage.png create mode 100644 installer/9/hr/content/images/dx2-selectMouse.png create mode 100644 installer/9/hr/content/images/dx2-setRootPassword.png create mode 100644 installer/9/hr/content/images/dx2-setupBootloader.png create mode 100644 installer/9/hr/content/images/dx2-setupSCSI.png create mode 100644 installer/9/hr/content/images/dx2-soundConfig.png create mode 100644 installer/9/hr/content/images/dx2-summaryBottom.png create mode 100644 installer/9/hr/content/images/dx2-takeOverHdConfirm.png create mode 100644 installer/9/hr/content/index.html create mode 100644 installer/9/hr/content/installUpdates.html create mode 100644 installer/9/hr/content/installer.html create mode 100644 installer/9/hr/content/locale.html create mode 100644 installer/9/hr/content/loupe.svg create mode 100644 installer/9/hr/content/main.js create mode 100644 installer/9/hr/content/misc-params.html create mode 100644 installer/9/hr/content/nwSearchFnt.js create mode 100644 installer/9/hr/content/search/default.props create mode 100644 installer/9/hr/content/search/en-us.props create mode 100644 installer/9/hr/content/search/es-es.props create mode 100644 installer/9/hr/content/search/htmlFileInfoList.js create mode 100644 installer/9/hr/content/search/htmlFileList.js create mode 100644 installer/9/hr/content/search/index-1.js create mode 100644 installer/9/hr/content/search/index-2.js create mode 100644 installer/9/hr/content/search/index-3.js create mode 100644 installer/9/hr/content/search/ja-jp.props create mode 100644 installer/9/hr/content/search/nwSearchFnt.js create mode 100644 installer/9/hr/content/search/punctuation.props create mode 100644 installer/9/hr/content/search/stemmers/de_stemmer.js create mode 100644 installer/9/hr/content/search/stemmers/en_stemmer.js create mode 100644 installer/9/hr/content/search/stemmers/fr_stemmer.js create mode 100644 installer/9/hr/content/securityLevel.html create mode 100644 installer/9/hr/content/selectInstallClass.html create mode 100644 installer/9/hr/content/selectKeyboard.html create mode 100644 installer/9/hr/content/selectLanguage.html create mode 100644 installer/9/hr/content/selectMouse.html create mode 100644 installer/9/hr/content/setupBootloader.html create mode 100644 installer/9/hr/content/setupSCSI.html create mode 100644 installer/9/hr/content/software.html create mode 100644 installer/9/hr/content/soundConfig.html create mode 100644 installer/9/hr/content/uninstall-Mageia.html create mode 100644 installer/9/hr/content/webhelp-custom.css create mode 100644 installer/9/hr/content/webhelp-default.css create mode 100644 installer/9/hr/index.html (limited to 'installer/9') diff --git a/installer/9/hr/content/Select-and-use-ISOs.html b/installer/9/hr/content/Select-and-use-ISOs.html new file mode 100644 index 00000000..d5f438a4 --- /dev/null +++ b/installer/9/hr/content/Select-and-use-ISOs.html @@ -0,0 +1,116 @@ + + + + + Select and use ISOsghost

Select and use ISOs

Uvod

Mageia is distributed via ISO images. This page will help you to choose +which image best suits your needs.

There are three types of installation media:

  • Classical installer: Booting with this +media provides you with the maximum flexibility when choosing what to +install, and for configuring your system. In particular, you have a choice +of which Desktop environment to install.

  • LIVE media: This option allows you to try +out Mageia without having to actually install it, or make any changes to +your computer. However, the Live media also includes an Installer, which can +be started when booting the media, or after booting into the Live operating +system itself.

    Bilješka

    The Live Installer is simpler compared to the Classical Installer - but you +have fewer configuration options.

    Važno

    Live ISOs can only be used to create „clean“ installations, +they cannot be used to upgrade previously installed Mageia releases.

  • Net Install: These are minimal ISO's +containing no more than that which is needed to start the DrakX installer +and find DrakX-installer-stage2 and other packages that +are needed to continue and complete the install. These packages may be on +the PC hard disk, on a local drive, on a local network or on the Internet.

    These media are very light (less than 100 MB) and are convenient if +bandwidth is too low to download a full DVD, or if you have a PC without a +DVD drive or is unable to boot from a USB stick.

More details are given in the next sections.

Media

Definition

Here, a medium (plural: media) is an ISO image file that allows you to +install and/or update Mageia and, by extension, any physical medium (DVD, +USB stick, ...) the ISO file is copied to.

You can find Mageia ISO's here.

Classical installation media

Common features

  • These ISOs use the Classical installer called DrakX

  • They are used for performing clean installs or to upgrade a previously +installed version of Mageia

  • Different media for 32 and 64-bit architectures

  • Some tools are available in the Installer „Welcome“ screen: +Rescue System, Memory Test, and Hardware +Detection Tool

  • Each DVD contains many available desktop environments and languages

  • You'll be given the choice during the installation to add non-free software

Live media

Common features

  • Can be used to preview the Mageia operating system without having to install +it

  • The Live media also includes an Installer.

  • Each ISO contains only one desktop environment (Plasma, GNOME or Xfce)

  • Different media for 32 and 64-bit architectures

  • They contain non-free software

Live DVD Plasma

  • Plasma desktop environment only

  • All available languages are present

  • 64-bit architecture only

Live DVD GNOME

  • GNOME desktop environment only

  • All available languages are present

  • 64-bit architecture only

Live DVD Xfce

  • Xfce desktop environment only

  • All available languages are present

  • 32 or 64-bit architectures

Net install media

Common features

  • Different media for 32 and 64-bit architectures

  • First steps are English language only

netinstall.iso

  • Contains only free software, for those who prefer to not use non-free +software

netinstall-nonfree.iso

  • Contains non-free software (mostly drivers, codecs...) for those who need it

Downloading and Checking Media

Downloading

Once you have chosen your ISO file, you can download it using either http or +BitTorrent. In both cases, you are provided with some information, such as +the mirror in use and an option to switch to an alternative if the bandwidth +is too low.

If http is chosen you will also see some information regarding checksums.

md5sum, sha1sum and +sha512sum (the most secure) are tools to check the ISO +integrity. Copy one of the checksums (string of alphanumeric characters) for +use in the next section.

In the meantime, a window to download the actual ISO will open:

Click on Save File, then click OK.

Checking the integrity of the downloaded media

The checksums referred to earlier, are digital fingerprints generated by an +algorithm from the file to be downloaded. You may compare the checksum of +your downloaded ISO against that of the original source ISO. If the +checksums do not match, it means that the actual data on the ISO's do not +match, and if that is the case, then you should retry the download or +attempt a repair using BitTorrent.

To generate the checksum for your downloaded ISO, open a console, (no need +to be root), and:

  • To use the md5sum, type: md5sum +path/to/the/image/file.iso

  • To use the sha1sum, type: sha1sum +path/to/the/image/file.iso

  • To use the sha512sum, type: sha512sum +path/to/the/image/file.iso

Example:

then compare the result (you may have to wait for a while) with the ISO +checksum provided by Mageia.

Burn or dump the ISO

The verified ISO can now be burned to a CD/DVD or „dumped“ to a +USB stick. This is not a standard copy operation, as a bootable medium will +actually be created.

Burning the ISO to a CD/DVD

Whichever software you use, ensure that the option to burn an +image is used. Burn data or +files is NOT correct. See the the Mageia +wiki for more information.

Dump the ISO to a USB stick

All Mageia ISOs are hybrids, which means you can dump them to a USB stick +and then use that to boot and install the system.

Upozorenje

Dumping an image onto a flash device destroys any previous file-system on +the device and all existing data will be lost.

Bilješka

Also, the only partition on the flash device will then just be the Mageia +ISO partition.

So, if an ISO of about 4GB is written to an 8GB USB stick, the stick will +then only show up as 4GB. This is because the remaining 4GB is no longer +formatted - hence not currently available for use. To recover the original +capacity, you must reformat and repartition the USB stick.

Using a graphical tool within Mageia

You can use a graphical tool like IsoDumper

Using a graphical tool within Windows

You could try:

Using the Command line within a GNU/Linux system

Upozorenje

It is potentially *dangerous* to do this by hand. You risk overwriting +potentially valuable existing data if you specify the wrong target device.

  1. Open a console

  2. Become a root (Administrator) user with the command +su - (don't forget the - )

  3. Plug in your USB stick - but do not mount it (this also means do not open +any application or file manager that could access or read it)

  4. Enter the command fdisk -l

  5. Find the device name for your USB stick (by its size), for example +/dev/sdb in the screenshot above, is an 8GB USB stick.

    Alternatively, you can find the device name with the command +dmesg. Towards the end of the following example, you can +see the device name starting with sd, and in this case, +sdd is the actual device. You can also see that its +size is 2GB:

    [72594.604531] usb 1-1: new high-speed USB device number 27 using xhci_hcd
+[72594.770528] usb 1-1: New USB device found, idVendor=8564, idProduct=1000
+[72594.770533] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[72594.770536] usb 1-1: Product: Mass Storage Device
+[72594.770537] usb 1-1: Manufacturer: JetFlash
+[72594.770539] usb 1-1: SerialNumber: 18MJTWLMPUCC3SSB
+[72594.770713] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
+[72594.770719] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
+[72594.771122] usb-storage 1-1:1.0: USB Mass Storage device detected
+[72594.772447] scsi host8: usb-storage 1-1:1.0
+[72595.963238] scsi 8:0:0:0: Direct-Access     JetFlash Transcend 2GB    1100 PQ: 0 ANSI: 4
+[72595.963626] sd 8:0:0:0: [sdd] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
+[72595.964104] sd 8:0:0:0: [sdd] Write Protect is off
+[72595.964108] sd 8:0:0:0: [sdd] Mode Sense: 43 00 00 00
+[72595.965025] sd 8:0:0:0: [sdd] No Caching mode page found
+[72595.965031] sd 8:0:0:0: [sdd] Assuming drive cache: write through
+[72595.967251]  sdd: sdd1
+[72595.969446] sd 8:0:0:0: [sdd] Attached SCSI removable disk

  6. Enter the command: dd if=path/to/the/ISO/file +of=/dev/sdX bs=1M

    Where X=your device name eg: +/dev/sdd

    Example: dd if=/home/user/Downloads/Mageia-6-x86_64-DVD.iso +of=/dev/sdd bs=1M

    Savjet

    It might be helpful to know that if stands +for input file and of stands +for output file

  7. Enter the command: sync

  8. This is the end of the process, and you may now unplug your USB stick.

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Natrag   Naprijed
 Početak 
loading table of contents...
diff --git a/installer/9/hr/content/acceptLicense.html b/installer/9/hr/content/acceptLicense.html new file mode 100644 index 00000000..701d3494 --- /dev/null +++ b/installer/9/hr/content/acceptLicense.html @@ -0,0 +1,40 @@ + + + + + Licenca i bilješka o izdanjughost

Licenca i bilješka o izdanju

Ugovor o licenci

  • Before installing Mageia, please read the license terms and conditions +carefully.

  • These terms and conditions apply to the entire Mageia distribution and must +be accepted before you can continue.

  • To proceed, simply select Accept and then click on +Next

If you decide not to accept these conditions, then we thank you for your +interest in Mageia. Clicking Quit will reboot your +computer.

Bilješke o izdanju

Important information about this particular Mageia release can be viewed by +clicking on the Release Notes button.

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Natrag   Naprijed
 Početak 
loading table of contents...
diff --git a/installer/9/hr/content/addUser.html b/installer/9/hr/content/addUser.html new file mode 100644 index 00000000..4e6a80f5 --- /dev/null +++ b/installer/9/hr/content/addUser.html @@ -0,0 +1,56 @@ + + + + + User Managementghost

User Management

Poostavi administratorsku (root) lozinku:

It is advisable for all Mageia installations to set a +superuser (Administrator) password, usually called the +root password in Linux. As you type a password into the +top box a shield will change from red-to-yellow-to-green depending on the +strength of the password. A green shield shows you are using a strong +password. You need to repeat the same password in the box underneath, to +check that the first entry was not mistyped.

Bilješka

All passwords are case-sensitive. It is best to use a mixture of letters +(upper and lower case), numbers and other characters in a password.

Unesite korisnika

Add a User here. A regular user has fewer privileges than the +superuser (root), but enough to use the Internet, office +applications or play games and anything else the average user might use a +computer for.

  • Icon

    Click on this button if you want to change the user's icon

  • Real Name

    Insert the user's real name into this text box

  • Login Name

    Enter the user login name or let DrakX use a version of the user's real +name. The login name is case-sensitive.

  • Password

    Type in the user password. There is a shield at the end of the text box that +indicates the strength of the password. (See also Bilješka)

    Password (again): Retype the user +password. DrakX will check that you have not mistyped the password.

Bilješka

Any users added while installing Mageia, will have a home directory that is +both read and write protected (umask=0027)

You can add any extra needed users in the Configuration - +Summary step during the install. Choose User +management.

Dozvole pristupa također se mogu promjeniti nakon instlacije.

User Management (advanced)

The Advanced option allows you to edit further settings +for the user you are adding.

  • Shell: This drop-down list allows you to change the +shell available to any user you added in the previous screen. Options are +Bash, Dash and Sh

  • User ID: Here you can set the user ID for any user you +added in the previous screen. If you are unsure what the purpose of this is, +then leave it blank.

  • Group ID: This lets you set the group ID. Again, if +unsure, leave it blank.

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Natrag   Naprijed
 Početak 
loading table of contents...
diff --git a/installer/9/hr/content/configureServices.html b/installer/9/hr/content/configureServices.html new file mode 100644 index 00000000..91af68a3 --- /dev/null +++ b/installer/9/hr/content/configureServices.html @@ -0,0 +1,36 @@ + + + + + Konfigurirajte vaše serviseghost

Konfigurirajte vaše servise

Here you can choose which services should start when you boot your system.

  • Click on a triangle to expand a group to all the relevant services. The +settings DrakX chose are usually good.

  • If you highlight a service, some information about it is shown in the info +box below.

Only change things when you know very well what you are doing.

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Natrag   Naprijed
 Početak 
loading table of contents...
diff --git a/installer/9/hr/content/diskPartitioning.html b/installer/9/hr/content/diskPartitioning.html new file mode 100644 index 00000000..4d4c7c42 --- /dev/null +++ b/installer/9/hr/content/diskPartitioning.html @@ -0,0 +1,115 @@ + + + + + Partitioningghost

Partitioning

Suggested Partitioning

In this screen you can see the content of your hard drive(s) along with the +DrakX partitioning proposals for where to install Mageia.

The actual options available from those shown below will vary according to +the layout and content of your particular hard drive(s).

Main Options

  • Use Existing Partitions

    If this option is available, then existing Linux compatible partitions have +been found and may be used for the installation.

  • Use Free Space

    If you have unused space on your hard drive then this option will use it for +your new Mageia installation.

  • Use Free Space on a Windows Partition

    If you have unused space on an existing Windows partition, the installer may +offer to use it. This can be a useful way of making room for your new Mageia +installation, but is a risky operation so you should make sure you have +backed up all important files!

    With this option, the installer displays the remaining Windows partition in +light blue and the proposed Mageia partition in dark blue with their +intended sizes just underneath. You have the option to modify these sizes by +clicking and dragging the gap between both partitions. See the following +screenshot:

  • Erase and use Entire Disk

    This option will allocate the entire drive for Mageia

    Upozorenje

    This will erase ALL data on the selected hard drive. Take care! If you +intend to use part of the disk for something else, or you already have data +on the drive that you are not prepared to lose, then do not use this option.

    Važno

    Note that this involves shrinking the size of the Windows partition. The +partition must be "clean", meaning that Windows must have closed down +correctly the last time it was used. It must also have been defragmented, +although this is not a guarantee that all files in the partition have been +moved out of the area that is about to be used. It is highly recommended to +back up your personal files.

  • Custom Disk Partitioning

    This gives you complete control over the placing of the installation on your +hard drive(s).

If you are not using the Custom disk partitioning +option, then the installer will allocate the available space according to +the following rules:

  • If the total available space is less than 50 GB, then only one partition is +created. This will be the / (root) partition.

  • If the total available space is greater than 50 GB, then three partitions +are created

    • 6/19 of the total available place is allocated to / +with a maximum of 50 GB

    • 1/19 is allocated to swap with a maximum of 4 GB

    • the rest (at least 12/19) is allocated to /home

This means that from 160 GB or greater available space, the installer will +create three partitions:

  • 50 GB for /

  • 4 GB for swap

  • and the remainder for /home

Bilješka

If you are using a UEFI system, the ESP (EFI System Partition) will be +automatically detected - or created if it does not exist yet - and mounted +on /boot/EFI. The Custom disk +partitioning option is the only one that allows to check it has +been correctly done.

If you are using a Legacy (also known as BIOS) system with a GPT partitioned +disk, you need to create a BIOS boot partition if it doesn't already +exist. It should be about 1 MiB with no mount point. It can be created with +the Installer, under Custom disk partitioning, like any +other partition. Be sure to select „BIOS boot partition“ for +filesystem type.

See DiskDrake for information on how to proceed.

Važno

Some newer drives are now using 4096 byte logical sectors, instead of the +previous standard of 512. Due to lack of available hardware, the +partitioning tool used in the installer has not been tested with such a +drive.

Some SSD devices now use an erase block size over 1 MB. If you have such a +device we suggest that you partition the drive in advance, using an +alternative partitioning tool like gparted, and to use the following +settings:

  • Align to = MiB

  • Free space preceding (MiB) = 2

Also make sure all partitions are created using an even number of megabytes.

Odaberite mjesta montiranja

Here you see the Linux partitions that have been found on your computer. If +you don't agree with the DrakX suggestions, you can change the mount points +yourself.

  • To the left of the drop-down menus is a list of available partitions. For +example: sda is a hard drive - and +5 is a partition number, followed +by the (capacity, mount point, filesystem type) of the +partition.

  • If you have several partitions, you can choose various different +mount points from the drop down menu, such as +/, /home and +/var. You can even make your own mount points, for +instance /video for a partition where you want to store +your films, or perhaps /Data for all your data files.

  • For any partitions that you don't need to make use of, you can leave the +mount point field blank.

Upozorenje

If you make any changes here, ensure you still have a / +(root) partition.

Savjet

If you are not sure what to choose, click Previous to +go back and then tick Custom disk partitioning, where +you can click on a partition to see its type and size.

If you are sure the mount points are correct, click on +Next, and choose whether you only want to format the +partition suggested by DrakX, or more.

Confirm hard disk to be formatted

  • Click on Previous if you are at all unsure about your +choice.

  • Click on Next to proceed if you are sure that it is OK +to erase every partition, every operating system and all +data that might be on that hard disk.

Custom Disk Partitioning with DiskDrake

  • Modify the layout of your disk(s) here. You can remove or create partitions, +change the filesystem or size of a partition and even view their details +before you start.

  • There is a tab at the top for every detected hard disk (or other storage +device, like a USB key). In the screenshot above there are two available +devices: sda and sdb.

  • For all other actions: click on the desired partition first. Then view it, +or choose a filesystem and a mount point, resize it or wipe +it. Expert mode provides more options such as to label +(name) a partition, or to choose a partition type.

  • Continue until you have adjusted everything to your satisfaction, then click +Done when you're ready.

Upozorenje

  1. Take care with the Clear all option, use it only if you +are sure you want to wipe all partitions on the selected storage device.

  2. If you wish to use encryption on your / partition you +must ensure that you have a separate /boot +partition. The encryption option for the /boot +partition must NOT be set, otherwise your system will be unbootable.

Važno

  • If you are installing Mageia on a UEFI system, check that an ESP (EFI System +Partition) is present and correctly mounted on +/boot/EFI. See Figure 1 below.

  • If you are installing Mageia on a Legacy/GPT system, check that a BIOS boot +partition is present and of the correct type. See Figure 2 below.

Slika 1. EFI System Partition

EFI System Partition

Slika 2. BIOS boot partition

BIOS boot partition

Formatiram

Here you can choose which partition(s) you wish to format. Any data on +partitions not marked for formatting will be preserved.

Usually, at least the partitions that DrakX selected need to be formatted.

Click on Advanced to choose the partitions you want to +check for so-called bad blocks

Savjet

If you're not sure you have made the right choice, you can click on +Previous, again on Previous and +then on Custom to get back to the main screen, where +you can choose to view details of your partitions.

When you are confident about the selections, click on +Next to continue.

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Natrag   Naprijed
 Početak 
loading table of contents...
diff --git a/installer/9/hr/content/draft.png b/installer/9/hr/content/draft.png new file mode 100644 index 00000000..59673fe1 Binary files /dev/null and b/installer/9/hr/content/draft.png differ diff --git a/installer/9/hr/content/exitInstall.html b/installer/9/hr/content/exitInstall.html new file mode 100644 index 00000000..294c3258 --- /dev/null +++ b/installer/9/hr/content/exitInstall.html @@ -0,0 +1,38 @@ + + + + + Čestitamoghost

Čestitamo

You have finished installing and configuring Mageia and it is now safe to +remove the installation medium and reboot your computer.

After rebooting, you can use the bootloader screen to choose which operating +system to start (if there are more than one on your computer).

If you didn't adjust the settings for the bootloader, your Mageia install +will be automatically selected and started.

Uživajte!

Visit www.mageia.org/en/ +if you have any questions or want to contribute to Mageia

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Natrag   Naprijed
 Početak 
loading table of contents...
diff --git a/installer/9/hr/content/firewall.html b/installer/9/hr/content/firewall.html new file mode 100644 index 00000000..234c44c2 --- /dev/null +++ b/installer/9/hr/content/firewall.html @@ -0,0 +1,54 @@ + + + + + Vatrozidghost

Vatrozid

This section allows you to configure some simple firewall rules: they +determine which type of message from the Internet will be accepted by the +target system. This, in turn, allows the corresponding services on the +system to be accessible from the Internet.

In the default setting (no button is checked), no service of the system is +accessible from the network. The Everything (no +firewall) option enables access to all services of the machine - +an option that does not make much sense in the context of the installer +since it would create a totally unprotected system. Its veritable use is in +the context of the Mageia Control Center (which uses the same GUI layout) +for temporarily disabling the entire set of firewall rules for testing and +debugging purposes.

All other options are more or less self-explanatory. As an example, you will +enable the CUPS server if you want printers on your machine to be accessible +from the network.

Advanced

The Advanced option opens a window where you can enable +a series of services by typing a list of „couples“ (blank +separated)

<port-number>/<protocol>

- <port-number> is the value of the port assigned to +the service you want to enable (e.g. 873 for the RSYNC service) as defined +in RFC-433;
- <protocol> is one of TCP or +UDP - the internet protocol that is used by the +service.

For instance, the entry for enabling access to the RSYNC service therefore +is 873/tcp.

In case a service is implemented to use both protocols, you specify 2 +couples for the same port.

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Natrag   Naprijed
 Početak 
loading table of contents...
diff --git a/installer/9/hr/content/graphicalConfiguration.html b/installer/9/hr/content/graphicalConfiguration.html new file mode 100644 index 00000000..e5911c89 --- /dev/null +++ b/installer/9/hr/content/graphicalConfiguration.html @@ -0,0 +1,82 @@ + + + + + Graphical Configurationghost

Graphical Configuration

Konfiguracija grafičke kartice i monitora

No matter which graphical environment (also known as desktop environment) +you chose for this install of Mageia, they are all based on a graphical user +interface system called X Window System, or simply +„X“. So in order for KDE Plasma, GNOME, LXDE or any other +graphical environment to work well, the following „X“ settings +need to be correct.

Choose the appropriate settings manually if you think the details are +incorrect, or if none are shown.

  • Graphic Card

    If you need to, you can select a specific card from this expandable +list. See the section called „Choose an X Server (Configure your Graphic Card)“.

  • Monitor

    You can choose Plug 'n Play, if applicable, or choose your monitor from the +Vendor or Generic lists. Choose +Custom if you prefer to manually set the horizontal and +vertical refresh rates of your monitor. See the section called „Izaberite vaš monitor“.

  • Resolution

    The resolution and color depth of your monitor can be set here.

  • Test

    The test button does not always appear during install. If the option is +there, and you test your settings, you should be asked to confirm that your +settings are correct. If you answer Yes, the settings +will be kept. If you don't see anything, you'll return to the configuration +screen and be able to reconfigure everything until the test result is +satisfactory. If the test option is not available, then make sure your +settings are on the safe side.

  • Options

    Here you can choose to enable or disable various options.

Upozorenje

There is a risk of damaging a monitor if you choose refresh rates that are +outside the frequency range of that monitor. This applies to older CRT +displays: modern monitors will reject an unsupported frequency and normally +enter standby mode.

Choose an X Server (Configure your Graphic Card)

DrakX has a very comprehensive database of video cards and will usually +correctly identify your video device.

If the installer has not correctly detected your graphic card and you know +which one you have, you can select it from the tree by:

  • Vendor

  • then the make of your card

  • and the model of card

If you cannot find your card in the vendor lists (because it's not yet in +the database or it's an older card) you may find a suitable driver in the +Xorg category, which provides more than 40 generic and +open source video card drivers. If you still can't find a specific driver +for your card there is the option of using the VESA driver which provides +basic capabilities.

Oprez

Be aware that if you select an incompatible driver you may only have access +to the Command Line Interface

Some video card manufacturers provide proprietary drivers for Linux which +may only be available in the Nonfree repository and in +some cases only from the card manufacturers' websites. The +Nonfree repository needs to be explicitly enabled to +access them. If you didn't enable it previously, you should do this after +your first reboot.

Izaberite vaš monitor

DrakX ima vrlo opsežnu bazu podataka monitora i obično će točno +identificirati vaš.

Upozorenje

Selecting a monitor with different characteristics +could damage your monitor or video hardware. Please don't try something +without knowing what you are doing. If in doubt you should +consult your monitor documentation.

Custom

This option allows you to set two critical parameters: the vertical refresh +rate and the horizontal sync rate. Vertical refresh determines how often the +screen is refreshed and horizontal sync is the rate at which scan lines are +displayed.

It is VERY IMPORTANT that you do not specify a monitor +type with a sync range that is beyond the capabilities of your monitor: you +may damage your monitor. If in doubt, choose a conservative setting and +consult your monitor documentation.

Plug'n Play

This is the default option and automatically tries to determine the monitor +type from the monitor database.

Vendor

If the installer has not correctly detected your monitor and you know which +one you have, you can select it from the tree by selecting:

  • Manufacturer

  • Monitor model

Generic

Selecting this group will list nearly 30 display configurations such as +1024x768 @ 60Hz and includes flat-panel displays as used in laptops. This is +often a good monitor selection group if you need to use the VESA card driver +when your video hardware cannot be determined automatically. Once again it +may be wise to be conservative in your selections.

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Natrag   Naprijed
 Početak 
loading table of contents...
diff --git a/installer/9/hr/content/images/Fdisk.png b/installer/9/hr/content/images/Fdisk.png new file mode 100644 index 00000000..dd85a476 Binary files /dev/null and b/installer/9/hr/content/images/Fdisk.png differ diff --git a/installer/9/hr/content/images/Md5sum.png b/installer/9/hr/content/images/Md5sum.png new file mode 100644 index 00000000..093e047f Binary files /dev/null and b/installer/9/hr/content/images/Md5sum.png differ diff --git a/installer/9/hr/content/images/Root.png b/installer/9/hr/content/images/Root.png new file mode 100644 index 00000000..4e42b5cb Binary files /dev/null and b/installer/9/hr/content/images/Root.png differ diff --git a/installer/9/hr/content/images/dx-welcome.png b/installer/9/hr/content/images/dx-welcome.png new file mode 100644 index 00000000..78a0c8a1 Binary files /dev/null and b/installer/9/hr/content/images/dx-welcome.png differ diff --git a/installer/9/hr/content/images/dx-welcome2.png b/installer/9/hr/content/images/dx-welcome2.png new file mode 100644 index 00000000..65651d04 Binary files /dev/null and b/installer/9/hr/content/images/dx-welcome2.png differ diff --git a/installer/9/hr/content/images/dx2-add_supplemental_media.png b/installer/9/hr/content/images/dx2-add_supplemental_media.png new file mode 100644 index 00000000..6b214092 Binary files /dev/null and b/installer/9/hr/content/images/dx2-add_supplemental_media.png differ diff --git a/installer/9/hr/content/images/dx2-chooseDesktop.png b/installer/9/hr/content/images/dx2-chooseDesktop.png new file mode 100644 index 00000000..19d1ee26 Binary files /dev/null and b/installer/9/hr/content/images/dx2-chooseDesktop.png differ diff --git a/installer/9/hr/content/images/dx2-chooseMountpoints.png b/installer/9/hr/content/images/dx2-chooseMountpoints.png new file mode 100644 index 00000000..52aca429 Binary files /dev/null and b/installer/9/hr/content/images/dx2-chooseMountpoints.png differ diff --git a/installer/9/hr/content/images/dx2-choosePackageGroups.png b/installer/9/hr/content/images/dx2-choosePackageGroups.png new file mode 100644 index 00000000..904f2eb2 Binary files /dev/null and b/installer/9/hr/content/images/dx2-choosePackageGroups.png differ diff --git a/installer/9/hr/content/images/dx2-choosePackagesTree.png b/installer/9/hr/content/images/dx2-choosePackagesTree.png new file mode 100644 index 00000000..ff7a2a6a Binary files /dev/null and b/installer/9/hr/content/images/dx2-choosePackagesTree.png differ diff --git a/installer/9/hr/content/images/dx2-configureServices.png b/installer/9/hr/content/images/dx2-configureServices.png new file mode 100644 index 00000000..46589a7e Binary files /dev/null and b/installer/9/hr/content/images/dx2-configureServices.png differ diff --git a/installer/9/hr/content/images/dx2-configureTimezoneUTC.png b/installer/9/hr/content/images/dx2-configureTimezoneUTC.png new file mode 100644 index 00000000..861efeb5 Binary files /dev/null and b/installer/9/hr/content/images/dx2-configureTimezoneUTC.png differ diff --git a/installer/9/hr/content/images/dx2-configureX_card_list.png b/installer/9/hr/content/images/dx2-configureX_card_list.png new file mode 100644 index 00000000..9569d38d Binary files /dev/null and b/installer/9/hr/content/images/dx2-configureX_card_list.png differ diff --git a/installer/9/hr/content/images/dx2-configureX_chooser.png b/installer/9/hr/content/images/dx2-configureX_chooser.png new file mode 100644 index 00000000..e366fefa Binary files /dev/null and b/installer/9/hr/content/images/dx2-configureX_chooser.png differ diff --git a/installer/9/hr/content/images/dx2-configureX_monitor.png b/installer/9/hr/content/images/dx2-configureX_monitor.png new file mode 100644 index 00000000..2cc650a8 Binary files /dev/null and b/installer/9/hr/content/images/dx2-configureX_monitor.png differ diff --git a/installer/9/hr/content/images/dx2-diskdrake.png b/installer/9/hr/content/images/dx2-diskdrake.png new file mode 100644 index 00000000..709ad8e4 Binary files /dev/null and b/installer/9/hr/content/images/dx2-diskdrake.png differ diff --git a/installer/9/hr/content/images/dx2-doPartitionDisks.png b/installer/9/hr/content/images/dx2-doPartitionDisks.png new file mode 100644 index 00000000..664e4fd6 Binary files /dev/null and b/installer/9/hr/content/images/dx2-doPartitionDisks.png differ diff --git a/installer/9/hr/content/images/dx2-exitInstall.png b/installer/9/hr/content/images/dx2-exitInstall.png new file mode 100644 index 00000000..9522c602 Binary files /dev/null and b/installer/9/hr/content/images/dx2-exitInstall.png differ diff --git a/installer/9/hr/content/images/dx2-formatPartitions.png b/installer/9/hr/content/images/dx2-formatPartitions.png new file mode 100644 index 00000000..067c89e3 Binary files /dev/null and b/installer/9/hr/content/images/dx2-formatPartitions.png differ diff --git a/installer/9/hr/content/images/dx2-installUpdates.png b/installer/9/hr/content/images/dx2-installUpdates.png new file mode 100644 index 00000000..23ee8d76 Binary files /dev/null and b/installer/9/hr/content/images/dx2-installUpdates.png differ diff --git a/installer/9/hr/content/images/dx2-license.png b/installer/9/hr/content/images/dx2-license.png new file mode 100644 index 00000000..ffad65bd Binary files /dev/null and b/installer/9/hr/content/images/dx2-license.png differ diff --git a/installer/9/hr/content/images/dx2-media_selection.png b/installer/9/hr/content/images/dx2-media_selection.png new file mode 100644 index 00000000..fc0579b5 Binary files /dev/null and b/installer/9/hr/content/images/dx2-media_selection.png differ diff --git a/installer/9/hr/content/images/dx2-minimal-install.png b/installer/9/hr/content/images/dx2-minimal-install.png new file mode 100644 index 00000000..84b7a783 Binary files /dev/null and b/installer/9/hr/content/images/dx2-minimal-install.png differ diff --git a/installer/9/hr/content/images/dx2-securityLevel.png b/installer/9/hr/content/images/dx2-securityLevel.png new file mode 100644 index 00000000..140bd049 Binary files /dev/null and b/installer/9/hr/content/images/dx2-securityLevel.png differ diff --git a/installer/9/hr/content/images/dx2-selectCountry.png b/installer/9/hr/content/images/dx2-selectCountry.png new file mode 100644 index 00000000..fbd45caf Binary files /dev/null and b/installer/9/hr/content/images/dx2-selectCountry.png differ diff --git a/installer/9/hr/content/images/dx2-selectInstallClass.png b/installer/9/hr/content/images/dx2-selectInstallClass.png new file mode 100644 index 00000000..4aad9d6f Binary files /dev/null and b/installer/9/hr/content/images/dx2-selectInstallClass.png differ diff --git a/installer/9/hr/content/images/dx2-selectKeyboard.png b/installer/9/hr/content/images/dx2-selectKeyboard.png new file mode 100644 index 00000000..f31e8a8f Binary files /dev/null and b/installer/9/hr/content/images/dx2-selectKeyboard.png differ diff --git a/installer/9/hr/content/images/dx2-selectLanguage.png b/installer/9/hr/content/images/dx2-selectLanguage.png new file mode 100644 index 00000000..4c40b209 Binary files /dev/null and b/installer/9/hr/content/images/dx2-selectLanguage.png differ diff --git a/installer/9/hr/content/images/dx2-selectMouse.png b/installer/9/hr/content/images/dx2-selectMouse.png new file mode 100644 index 00000000..6a137d80 Binary files /dev/null and b/installer/9/hr/content/images/dx2-selectMouse.png differ diff --git a/installer/9/hr/content/images/dx2-setRootPassword.png b/installer/9/hr/content/images/dx2-setRootPassword.png new file mode 100644 index 00000000..f9b51756 Binary files /dev/null and b/installer/9/hr/content/images/dx2-setRootPassword.png differ diff --git a/installer/9/hr/content/images/dx2-setupBootloader.png b/installer/9/hr/content/images/dx2-setupBootloader.png new file mode 100644 index 00000000..7ea172cc Binary files /dev/null and b/installer/9/hr/content/images/dx2-setupBootloader.png differ diff --git a/installer/9/hr/content/images/dx2-setupSCSI.png b/installer/9/hr/content/images/dx2-setupSCSI.png new file mode 100644 index 00000000..48bdcb0a Binary files /dev/null and b/installer/9/hr/content/images/dx2-setupSCSI.png differ diff --git a/installer/9/hr/content/images/dx2-soundConfig.png b/installer/9/hr/content/images/dx2-soundConfig.png new file mode 100644 index 00000000..d953621c Binary files /dev/null and b/installer/9/hr/content/images/dx2-soundConfig.png differ diff --git a/installer/9/hr/content/images/dx2-summaryBottom.png b/installer/9/hr/content/images/dx2-summaryBottom.png new file mode 100644 index 00000000..56641f8f Binary files /dev/null and b/installer/9/hr/content/images/dx2-summaryBottom.png differ diff --git a/installer/9/hr/content/images/dx2-takeOverHdConfirm.png b/installer/9/hr/content/images/dx2-takeOverHdConfirm.png new file mode 100644 index 00000000..1f6f7e09 Binary files /dev/null and b/installer/9/hr/content/images/dx2-takeOverHdConfirm.png differ diff --git a/installer/9/hr/content/index.html b/installer/9/hr/content/index.html new file mode 100644 index 00000000..d37072a9 --- /dev/null +++ b/installer/9/hr/content/index.html @@ -0,0 +1,38 @@ + + + + + Instalacija pomoćughost

Bilješka

No one will see all the installer screens that you see in this manual. Which +screens you will see, depends on your hardware and the choices you make +while installing.

The texts and screenshots in this manual are available under the CC BY-SA +3.0 license http://creativecommons.org/licenses/by-sa/3.0/.

This manual was produced with the help of the Calenco CMS developed by NeoDoc.

It was written by volunteers in their free time. Please contact Documentation +Team, if you would like to help improve this manual.

Sadržaj

Select and use ISOs
Uvod
Media
Downloading and Checking Media
Burn or dump the ISO
DrakX, Mageia instalacijski program
The installation steps
Instalacijski zaslon dobrodošlice
Installation Problems and Possible Solutions
Molim izaberite jezik koji želite koristiti
Licenca i bilješka o izdanju
Ugovor o licenci
Bilješke o izdanju
Setup SCSI
Install or Upgrade
Tipkovnica
Partitioning
Suggested Partitioning
Odaberite mjesta montiranja
Confirm hard disk to be formatted
Custom Disk Partitioning with DiskDrake
Formatiram
Software
Media Selection
Odabir radnog okruženja
Odabir grupe paketa
Minimal Install
Izaberi pojedinačne pakete
User Management
Poostavi administratorsku (root) lozinku:
Unesite korisnika
User Management (advanced)
Graphical Configuration
Konfiguracija grafičke kartice i monitora
Choose an X Server (Configure your Graphic Card)
Izaberite vaš monitor
Bootloader
Grub2
Bootloader Setup
Other Options
Configuration Summary
System parameters
Hardware parameters
Network and Internet parameters
Sigurnost
Locale
Konfigurirajte vremensku zonu
Select your Country / Region
Konfigurirajte vaše servise
Select mouse
Konfiguracija zvuka
Napredno
Sigurnosna Razina
Vatrozid
Nadogradnje
Čestitamo
Uninstalling Mageia
© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
   Naprijed
loading table of contents...
diff --git a/installer/9/hr/content/installUpdates.html b/installer/9/hr/content/installUpdates.html new file mode 100644 index 00000000..306ce4e6 --- /dev/null +++ b/installer/9/hr/content/installUpdates.html @@ -0,0 +1,36 @@ + + + + + Nadogradnjeghost

Nadogradnje

Since this version of Mageia was released, some packages will have been +updated or improved.

  • Select Yes if you wish to download and install them

  • Select No if you don't want to do this now, or if you +aren't connected to the Internet

  • Press Next to continue

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Natrag   Naprijed
 Početak 
loading table of contents...
diff --git a/installer/9/hr/content/installer.html b/installer/9/hr/content/installer.html new file mode 100644 index 00000000..5f7c6f33 --- /dev/null +++ b/installer/9/hr/content/installer.html @@ -0,0 +1,78 @@ + + + + + DrakX, Mageia instalacijski programghost

DrakX, Mageia instalacijski program

Whether you are new to GNU-Linux or an experienced user, the Mageia +Installer is designed to help make your installation or upgrade as easy as +possible.

The installation steps

  • The install process is divided into a number of steps - the status of which +is indicated in a panel to the left of the screen.

  • Each step has one or more screens, which may also have +Advanced sections with extra, less commonly required +options.

  • Most screens have Help buttons for further details +about the particular step.

Oprez

If at some point during the install you decide to abort the installation, it +is possible to reboot, but please think twice before you do this. Once a +partition has been formatted or updates have started to be installed, your +computer is no longer in the same state and rebooting it could very well +leave you with an unusable system.

If, in spite of this, you are very sure rebooting is what you want, go to a +text terminal by pressing the keys Ctrl+Alt+F2 together. After that, +press Ctrl+Alt+Delete together to reboot.

Instalacijski zaslon dobrodošlice

The particular screen that you will first see when booting from the +Installation media will depend on whether your computer motherboard is of +the Legacy (BIOS) or UEFI type.

The welcome menu screen has various options, however the default option will +start the installer, and is normally all that you will need.

Legacy (BIOS) Systems

Menu

  • Install Mageia

    Install Mageia to a hard disk. This is the default option, and will +automatically start after a short while unless another option is selected.

  • Rescue System

    This option allows you to either re-install the bootloader for an existing +Mageia installation or you can use it to restore a Windows bootloader.

  • Memory Test

    Test the installed RAM by performing multiple read and write +operations. Reboot to end the test.

  • F2: Language

    Press F2 for alternative languages.

UEFI Systems

From this screen, you can access options by pressing e to +enter the edit mode. To come back to this screen, press Esc +to quit without saving or press F10 to save and quit.

Menu

  • Install: Start the Install process

  • Rescue: This option allows you to either +re-install the bootloader for an existing Mageia installation or you can use +it to restore a Windows bootloader.

  • F2: Language: Press F2 for +alternative languages.

If you booted from a USB stick, you will see the above options duplicated, +and in this case, you should use the set that will be suffixed with "USB".

Installation Problems and Possible Solutions

No Graphical Interface

  • After the initial screen you did not progress to the Language +Selection screen. This can happen with some graphic cards and +older systems. Try using low resolution by typing vgalo +at the prompt.

  • If the hardware is very old, a graphical installation may not be +possible. In this case it is worth trying a text-mode installation. To use +this press Esc at the Welcome screen +and confirm with ENTER. You will be presented with a black +screen with a boot: prompt. Type text +and press ENTER to continue with the installation in text +mode.

The Install Freezes

If the system appeared to freeze during the installation, this may be a +problem with hardware detection. In this case the automatic hardware +detection may be bypassed and dealt with later. To try this, type +noauto at the prompt. This option may also be combined +with other parameters as necessary.

RAM problem

This will rarely be needed, but in some cases the hardware may report the +available RAM incorrectly. To specify this manually, you can use the +mem=xxxM parameter, where +xxx is the correct amount of +RAM. e.g. mem=256M would specify 256MB of RAM.

Dynamic partitions

If you converted your hard disk from Basic format to +Dynamic format in Microsoft Windows, then it is not +possible to install Mageia on this disc. To revert to a +Basic disk, see the Microsoft documentation: http://msdn.microsoft.com/en-us/library/cc776315.aspx.

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Natrag   Naprijed
 Početak 
loading table of contents...
diff --git a/installer/9/hr/content/locale.html b/installer/9/hr/content/locale.html new file mode 100644 index 00000000..ae8fdb3b --- /dev/null +++ b/installer/9/hr/content/locale.html @@ -0,0 +1,50 @@ + + + + + Localeghost

Locale

Konfigurirajte vremensku zonu

  • Choose your timezone by choosing your country, or a city close to you in the +same timezone.

In the next screen you can choose to set your hardware clock to local time +or to GMT, also known as UTC.

Bilješka

Ako imate više operativinih sustava na vašem računalu, budite sigurni da su +svi postavljeni na lokalno vrijeme ili na

Select your Country / Region

  • Select your country or region. This is important for all kinds of settings, +like the currency and wireless regulatory domain. Setting the wrong country +can lead to being unable to use a Wireless network.

  • If your country isn't in the list, click the Other +Countries option and choose your country / region there.

Bilješka

If your country is only in the Other Countries list, +after clicking OK it may seem that a country from the +main list was chosen. Despite this, DrakX will actually apply your choice.

Input method

In the Other Countries screen you can also select an +input method (at the bottom of the list). Input methods allow users to input +multilingual characters (Chinese, Japanese, Korean, etc). IBus is the +default input method, so users should not need to configure it +manually. Other input methods (SCIM, GCIN, HIME, etc) also provide similar +functions and can be installed if you added HTTP/FTP media before package +selection.

Bilješka

If you missed the input method setup during installation, you can access it +post-install via Configure your Computer → System, or by running +localedrake as root.

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Natrag   Naprijed
 Početak 
loading table of contents...
diff --git a/installer/9/hr/content/loupe.svg b/installer/9/hr/content/loupe.svg new file mode 100644 index 00000000..fc5c33ca --- /dev/null +++ b/installer/9/hr/content/loupe.svg @@ -0,0 +1,22 @@ + + + + + + + image/svg+xml + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/installer/9/hr/content/main.js b/installer/9/hr/content/main.js new file mode 100644 index 00000000..457dfe1a --- /dev/null +++ b/installer/9/hr/content/main.js @@ -0,0 +1,255 @@ +/* global stemmer */ + +/** + * Miscellaneous js functions for WebHelp + * Kasun Gajasinghe, http://kasunbg.blogspot.com + * David Cramer, http://www.thingbag.net + * + */ + +function adjust(){ + var headerHeight = $("#header").outerHeight( true ); + $("#leftnavigation").css('top' , headerHeight); + if(document.body.clientWidth >= 701) + $("#content").css('top' , headerHeight+'px'); + else + $("#content").css('top' , 0+'px'); +} + +$( window ).resize(function() { + adjust(); +}); + +$(document).ready(function() { + adjust(); + + var href = window.location.href; + var indexOfTermToSearch = href.indexOf('?search='); + if (indexOfTermToSearch !== -1) + { + var term = decodeURI(href.substring(indexOfTermToSearch+8)); + $('#textToSearch').val(term); + document.cookie='textToSearch='+term; + searchHighlight(term); + } + + $(function() { + $("#tabs").tabs({ + cookie: { + expires: 2 + } + }); + }); + + //Generate the tree + $("#ulTreeDiv").attr("style",""); + $("#tree").treeview({ + collapsed: true, + animated: "medium", + control: "#sidetreecontrol", + persist: "cookie" + }); + + //after toc fully styled, display it. Until loading, a 'loading' image will be displayed + $("#tocLoading").attr("style","display:none;"); + //$("#ulTreeDiv").attr("style","display:block;"); + + //.searchButton is the css class applied to 'Go' button + $(function() { + $("button", ".searchButton").button(); + + $("button", ".searchButton").click(function() {return false;}); + }); + + //'ui-tabs-1' is the cookie name which is used for the persistence of the tabs.(Content/Search tab) + if ($.cookie('ui-tabs-1') === '1') { //search tab is visible + let textToSearch = $.cookie('textToSearch') ; + if ( textToSearch !== undefined && textToSearch !== null && textToSearch.length > 0) { + document.getElementById('textToSearch').value = $.cookie('textToSearch'); + Verifie('diaSearch_Form'); + + var hcookie = selectTxtToHigh() ; + searchHighlight(hcookie); + } + } + + syncToc(); //Synchronize the toc tree with the content pane, when loading the page. + //$("#doSearch").button(); //add jquery button styling to 'Go' button +}); + +function selectTxtToHigh() { + var allCookies = document.cookie.split(";"); + var hcookie; + for (var iCookie = 0; iCookie < allCookies.length; iCookie++) { + var cookie = allCookies[iCookie]; + var indexOfEq = cookie.indexOf('='); + var key = cookie.substring(0, indexOfEq); + if (key.includes( "highlight")){ + hcookie = cookie.substring(indexOfEq + 1); + } + } + return hcookie; +} + + +/** + * Synchronize with the tableOfContents + */ + +function syncToc() { + var tocid = document.getElementById("zz_current-id").getAttribute("data-id"); + var a = document.getElementById(tocid); + + if (a !== undefined && a !== null ) { + //Expanding the child sections of the selected node. + var nodeClass = a.getAttribute("class"); + if (nodeClass !== null && !nodeClass.match(/collapsable/)) { + a.setAttribute("class", "collapsable"); + //remove display:none; css style from