From 3712c21c6d5e5c37bed83b6d856098d833c1a336 Mon Sep 17 00:00:00 2001 From: Papoteur Date: Sun, 11 Jun 2023 15:20:08 +0200 Subject: Adding or refreshing installer in pl --- installer/9/pl/content/Select-and-use-ISOs.html | 116 ++++ installer/9/pl/content/acceptLicense.html | 40 ++ installer/9/pl/content/addUser.html | 56 ++ installer/9/pl/content/configureServices.html | 36 ++ installer/9/pl/content/diskPartitioning.html | 114 ++++ installer/9/pl/content/draft.png | Bin 0 -> 16150 bytes installer/9/pl/content/exitInstall.html | 38 ++ installer/9/pl/content/firewall.html | 54 ++ installer/9/pl/content/graphicalConfiguration.html | 82 +++ installer/9/pl/content/images/Fdisk.png | Bin 0 -> 22864 bytes installer/9/pl/content/images/Md5sum.png | Bin 0 -> 4219 bytes installer/9/pl/content/images/Root.png | Bin 0 -> 2673 bytes installer/9/pl/content/images/dx-welcome.png | Bin 0 -> 201864 bytes installer/9/pl/content/images/dx-welcome2.png | Bin 0 -> 202729 bytes .../content/images/dx2-add_supplemental_media.png | Bin 0 -> 40259 bytes .../9/pl/content/images/dx2-chooseDesktop.png | Bin 0 -> 52679 bytes .../9/pl/content/images/dx2-chooseMountpoints.png | Bin 0 -> 35046 bytes .../pl/content/images/dx2-choosePackageGroups.png | Bin 0 -> 55248 bytes .../9/pl/content/images/dx2-choosePackagesTree.png | Bin 0 -> 55876 bytes .../9/pl/content/images/dx2-configureServices.png | Bin 0 -> 44862 bytes .../pl/content/images/dx2-configureTimezoneUTC.png | Bin 0 -> 39942 bytes .../pl/content/images/dx2-configureX_card_list.png | Bin 0 -> 44051 bytes .../9/pl/content/images/dx2-configureX_monitor.png | Bin 0 -> 47187 bytes installer/9/pl/content/images/dx2-diskdrake.png | Bin 0 -> 48544 bytes .../9/pl/content/images/dx2-doPartitionDisks.png | Bin 0 -> 114566 bytes installer/9/pl/content/images/dx2-exitInstall.png | Bin 0 -> 39542 bytes .../9/pl/content/images/dx2-formatPartitions.png | Bin 0 -> 36093 bytes .../9/pl/content/images/dx2-installUpdates.png | Bin 0 -> 39412 bytes installer/9/pl/content/images/dx2-license.png | Bin 0 -> 59163 bytes .../9/pl/content/images/dx2-media_selection.png | Bin 0 -> 38205 bytes .../9/pl/content/images/dx2-minimal-install.png | Bin 0 -> 36824 bytes .../9/pl/content/images/dx2-selectCountry.png | Bin 0 -> 43410 bytes .../9/pl/content/images/dx2-selectInstallClass.png | Bin 0 -> 33058 bytes .../9/pl/content/images/dx2-selectLanguage.png | Bin 0 -> 43087 bytes installer/9/pl/content/images/dx2-selectMouse.png | Bin 0 -> 36350 bytes .../9/pl/content/images/dx2-setRootPassword.png | Bin 0 -> 39919 bytes .../9/pl/content/images/dx2-setupBootloader.png | Bin 0 -> 45863 bytes installer/9/pl/content/images/dx2-setupSCSI.png | Bin 0 -> 152924 bytes installer/9/pl/content/images/dx2-soundConfig.png | Bin 0 -> 39122 bytes .../9/pl/content/images/dx2-summaryBottom.png | Bin 0 -> 51677 bytes installer/9/pl/content/index.html | 38 ++ installer/9/pl/content/installUpdates.html | 36 ++ installer/9/pl/content/installer.html | 78 +++ installer/9/pl/content/locale.html | 50 ++ installer/9/pl/content/loupe.svg | 22 + installer/9/pl/content/main.js | 255 +++++++++ installer/9/pl/content/misc-params.html | 68 +++ installer/9/pl/content/nwSearchFnt.js | 608 +++++++++++++++++++++ installer/9/pl/content/search/default.props | 1 + installer/9/pl/content/search/en-us.props | 45 ++ installer/9/pl/content/search/es-es.props | 179 ++++++ installer/9/pl/content/search/htmlFileInfoList.js | 23 + installer/9/pl/content/search/htmlFileList.js | 24 + installer/9/pl/content/search/index-1.js | 487 +++++++++++++++++ installer/9/pl/content/search/index-2.js | 486 ++++++++++++++++ installer/9/pl/content/search/index-3.js | 482 ++++++++++++++++ installer/9/pl/content/search/ja-jp.props | 1 + installer/9/pl/content/search/nwSearchFnt.js | 513 +++++++++++++++++ installer/9/pl/content/search/punctuation.props | 31 ++ .../9/pl/content/search/stemmers/de_stemmer.js | 247 +++++++++ .../9/pl/content/search/stemmers/en_stemmer.js | 187 +++++++ .../9/pl/content/search/stemmers/fr_stemmer.js | 299 ++++++++++ installer/9/pl/content/securityLevel.html | 42 ++ installer/9/pl/content/selectInstallClass.html | 45 ++ installer/9/pl/content/selectKeyboard.html | 47 ++ installer/9/pl/content/selectLanguage.html | 47 ++ installer/9/pl/content/selectMouse.html | 38 ++ installer/9/pl/content/setupBootloader.html | 73 +++ installer/9/pl/content/setupSCSI.html | 38 ++ installer/9/pl/content/software.html | 88 +++ installer/9/pl/content/soundConfig.html | 42 ++ installer/9/pl/content/uninstall-Mageia.html | 48 ++ installer/9/pl/content/webhelp-custom.css | 369 +++++++++++++ installer/9/pl/content/webhelp-default.css | 92 ++++ installer/9/pl/index.html | 15 + 75 files changed, 5680 insertions(+) create mode 100644 installer/9/pl/content/Select-and-use-ISOs.html create mode 100644 installer/9/pl/content/acceptLicense.html create mode 100644 installer/9/pl/content/addUser.html create mode 100644 installer/9/pl/content/configureServices.html create mode 100644 installer/9/pl/content/diskPartitioning.html create mode 100644 installer/9/pl/content/draft.png create mode 100644 installer/9/pl/content/exitInstall.html create mode 100644 installer/9/pl/content/firewall.html create mode 100644 installer/9/pl/content/graphicalConfiguration.html create mode 100644 installer/9/pl/content/images/Fdisk.png create mode 100644 installer/9/pl/content/images/Md5sum.png create mode 100644 installer/9/pl/content/images/Root.png create mode 100644 installer/9/pl/content/images/dx-welcome.png create mode 100644 installer/9/pl/content/images/dx-welcome2.png create mode 100644 installer/9/pl/content/images/dx2-add_supplemental_media.png create mode 100644 installer/9/pl/content/images/dx2-chooseDesktop.png create mode 100644 installer/9/pl/content/images/dx2-chooseMountpoints.png create mode 100644 installer/9/pl/content/images/dx2-choosePackageGroups.png create mode 100644 installer/9/pl/content/images/dx2-choosePackagesTree.png create mode 100644 installer/9/pl/content/images/dx2-configureServices.png create mode 100644 installer/9/pl/content/images/dx2-configureTimezoneUTC.png create mode 100644 installer/9/pl/content/images/dx2-configureX_card_list.png create mode 100644 installer/9/pl/content/images/dx2-configureX_monitor.png create mode 100644 installer/9/pl/content/images/dx2-diskdrake.png create mode 100644 installer/9/pl/content/images/dx2-doPartitionDisks.png create mode 100644 installer/9/pl/content/images/dx2-exitInstall.png create mode 100644 installer/9/pl/content/images/dx2-formatPartitions.png create mode 100644 installer/9/pl/content/images/dx2-installUpdates.png create mode 100644 installer/9/pl/content/images/dx2-license.png create mode 100644 installer/9/pl/content/images/dx2-media_selection.png create mode 100644 installer/9/pl/content/images/dx2-minimal-install.png create mode 100644 installer/9/pl/content/images/dx2-selectCountry.png create mode 100644 installer/9/pl/content/images/dx2-selectInstallClass.png create mode 100644 installer/9/pl/content/images/dx2-selectLanguage.png create mode 100644 installer/9/pl/content/images/dx2-selectMouse.png create mode 100644 installer/9/pl/content/images/dx2-setRootPassword.png create mode 100644 installer/9/pl/content/images/dx2-setupBootloader.png create mode 100644 installer/9/pl/content/images/dx2-setupSCSI.png create mode 100644 installer/9/pl/content/images/dx2-soundConfig.png create mode 100644 installer/9/pl/content/images/dx2-summaryBottom.png create mode 100644 installer/9/pl/content/index.html create mode 100644 installer/9/pl/content/installUpdates.html create mode 100644 installer/9/pl/content/installer.html create mode 100644 installer/9/pl/content/locale.html create mode 100644 installer/9/pl/content/loupe.svg create mode 100644 installer/9/pl/content/main.js create mode 100644 installer/9/pl/content/misc-params.html create mode 100644 installer/9/pl/content/nwSearchFnt.js create mode 100644 installer/9/pl/content/search/default.props create mode 100644 installer/9/pl/content/search/en-us.props create mode 100644 installer/9/pl/content/search/es-es.props create mode 100644 installer/9/pl/content/search/htmlFileInfoList.js create mode 100644 installer/9/pl/content/search/htmlFileList.js create mode 100644 installer/9/pl/content/search/index-1.js create mode 100644 installer/9/pl/content/search/index-2.js create mode 100644 installer/9/pl/content/search/index-3.js create mode 100644 installer/9/pl/content/search/ja-jp.props create mode 100644 installer/9/pl/content/search/nwSearchFnt.js create mode 100644 installer/9/pl/content/search/punctuation.props create mode 100644 installer/9/pl/content/search/stemmers/de_stemmer.js create mode 100644 installer/9/pl/content/search/stemmers/en_stemmer.js create mode 100644 installer/9/pl/content/search/stemmers/fr_stemmer.js create mode 100644 installer/9/pl/content/securityLevel.html create mode 100644 installer/9/pl/content/selectInstallClass.html create mode 100644 installer/9/pl/content/selectKeyboard.html create mode 100644 installer/9/pl/content/selectLanguage.html create mode 100644 installer/9/pl/content/selectMouse.html create mode 100644 installer/9/pl/content/setupBootloader.html create mode 100644 installer/9/pl/content/setupSCSI.html create mode 100644 installer/9/pl/content/software.html create mode 100644 installer/9/pl/content/soundConfig.html create mode 100644 installer/9/pl/content/uninstall-Mageia.html create mode 100644 installer/9/pl/content/webhelp-custom.css create mode 100644 installer/9/pl/content/webhelp-default.css create mode 100644 installer/9/pl/index.html (limited to 'installer/9') diff --git a/installer/9/pl/content/Select-and-use-ISOs.html b/installer/9/pl/content/Select-and-use-ISOs.html new file mode 100644 index 00000000..5d61bf51 --- /dev/null +++ b/installer/9/pl/content/Select-and-use-ISOs.html @@ -0,0 +1,116 @@ + + + + + Wybierz i użyj obrazu ISOghost

Wybierz i użyj obrazu ISO

Wprowadzenie

Mageia is distributed via ISO images. This page will help you to choose +which image best suits your needs.

There are three types of installation media:

  • Classical installer: Booting with this +media provides you with the maximum flexibility when choosing what to +install, and for configuring your system. In particular, you have a choice +of which Desktop environment to install.

  • LIVE media: This option allows you to try +out Mageia without having to actually install it, or make any changes to +your computer. However, the Live media also includes an Installer, which can +be started when booting the media, or after booting into the Live operating +system itself.

    Notatka

    The Live Installer is simpler compared to the Classical Installer - but you +have fewer configuration options.

    WAŻNE

    Live ISOs can only be used to create „clean” installations, +they cannot be used to upgrade previously installed Mageia releases.

  • Net Install: These are minimal ISO's +containing no more than that which is needed to start the DrakX installer +and find DrakX-installer-stage2 and other packages that +are needed to continue and complete the install. These packages may be on +the PC hard disk, on a local drive, on a local network or on the Internet.

    These media are very light (less than 100 MB) and are convenient if +bandwidth is too low to download a full DVD, or if you have a PC without a +DVD drive or is unable to boot from a USB stick.

More details are given in the next sections.

Nośnik

Definicja

Here, a medium (plural: media) is an ISO image file that allows you to +install and/or update Mageia and, by extension, any physical medium (DVD, +USB stick, ...) the ISO file is copied to.

You can find Mageia ISO's here.

Klasyczne medium instalacji

Powszechne możliwości

  • These ISOs use the Classical installer called DrakX

  • They are used for performing clean installs or to upgrade a previously +installed version of Mageia

  • Different media for 32 and 64-bit architectures

  • Some tools are available in the Installer „Welcome” screen: +Rescue System, Memory Test, and Hardware +Detection Tool

  • Each DVD contains many available desktop environments and languages

  • You'll be given the choice during the installation to add non-free software

Nośniki live

Powszechne możliwości

  • Can be used to preview the Mageia operating system without having to install +it

  • The Live media also includes an Installer.

  • Each ISO contains only one desktop environment (Plasma, GNOME or Xfce)

  • Different media for 32 and 64-bit architectures

  • They contain non-free software

Live DVD Plasma

  • Plasma desktop environment only

  • All available languages are present

  • 64-bit architecture only

Live DVD GNOME

  • GNOME desktop environment only

  • All available languages are present

  • 64-bit architecture only

Live DVD Xfce

  • Xfce desktop environment only

  • All available languages are present

  • 32 or 64-bit architectures

Net install media

Powszechne możliwości

  • Different media for 32 and 64-bit architectures

  • First steps are English language only

netinstall.iso

  • Contains only free software, for those who prefer to not use non-free +software

netinstall-nonfree.iso

  • Contains non-free software (mostly drivers, codecs...) for those who need it

Pobieranie i Sprawdzanie Mediów

Pobieranie

Once you have chosen your ISO file, you can download it using either http or +BitTorrent. In both cases, you are provided with some information, such as +the mirror in use and an option to switch to an alternative if the bandwidth +is too low.

If http is chosen you will also see some information regarding checksums.

md5sum, sha1sum and +sha512sum (the most secure) are tools to check the ISO +integrity. Copy one of the checksums (string of alphanumeric characters) for +use in the next section.

In the meantime, a window to download the actual ISO will open:

Click on Save File, then click OK.

Checking the integrity of the downloaded media

The checksums referred to earlier, are digital fingerprints generated by an +algorithm from the file to be downloaded. You may compare the checksum of +your downloaded ISO against that of the original source ISO. If the +checksums do not match, it means that the actual data on the ISO's do not +match, and if that is the case, then you should retry the download or +attempt a repair using BitTorrent.

To generate the checksum for your downloaded ISO, open a console, (no need +to be root), and:

  • To use the md5sum, type: md5sum +path/to/the/image/file.iso

  • To use the sha1sum, type: sha1sum +path/to/the/image/file.iso

  • To use the sha512sum, type: sha512sum +path/to/the/image/file.iso

Example:

then compare the result (you may have to wait for a while) with the ISO +checksum provided by Mageia.

Wypal lub zrzuć obraz ISO

The verified ISO can now be burned to a CD/DVD or „dumped” to a +USB stick. This is not a standard copy operation, as a bootable medium will +actually be created.

Wypalenie obrazu ISO na CD/DVD

Whichever software you use, ensure that the option to burn an +image is used. Burn data or +files is NOT correct. See the the Mageia +wiki for more information.

Zrzuć obraz ISO na pamięci USB

All Mageia ISOs are hybrids, which means you can dump them to a USB stick +and then use that to boot and install the system.

Ostrzeżenie

Dumping an image onto a flash device destroys any previous file-system on +the device and all existing data will be lost.

Notatka

Also, the only partition on the flash device will then just be the Mageia +ISO partition.

So, if an ISO of about 4GB is written to an 8GB USB stick, the stick will +then only show up as 4GB. This is because the remaining 4GB is no longer +formatted - hence not currently available for use. To recover the original +capacity, you must reformat and repartition the USB stick.

Używanie graficznych narzędzi w Magei

You can use a graphical tool like IsoDumper

Używanie graficznych narzędzi w Windows

Powinieneś spróbować:

Using the Command line within a GNU/Linux system

Ostrzeżenie

It is potentially *dangerous* to do this by hand. You risk overwriting +potentially valuable existing data if you specify the wrong target device.

  1. Otwórz konsolę

  2. Become a root (Administrator) user with the command +su - (don't forget the - )

  3. Plug in your USB stick - but do not mount it (this also means do not open +any application or file manager that could access or read it)

  4. Enter the command fdisk -l

  5. Find the device name for your USB stick (by its size), for example +/dev/sdb in the screenshot above, is an 8GB USB stick.

    Alternatively, you can find the device name with the command +dmesg. Towards the end of the following example, you can +see the device name starting with sd, and in this case, +sdd is the actual device. You can also see that its +size is 2GB:

    [72594.604531] usb 1-1: new high-speed USB device number 27 using xhci_hcd
+[72594.770528] usb 1-1: New USB device found, idVendor=8564, idProduct=1000
+[72594.770533] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[72594.770536] usb 1-1: Product: Mass Storage Device
+[72594.770537] usb 1-1: Manufacturer: JetFlash
+[72594.770539] usb 1-1: SerialNumber: 18MJTWLMPUCC3SSB
+[72594.770713] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
+[72594.770719] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
+[72594.771122] usb-storage 1-1:1.0: USB Mass Storage device detected
+[72594.772447] scsi host8: usb-storage 1-1:1.0
+[72595.963238] scsi 8:0:0:0: Direct-Access     JetFlash Transcend 2GB    1100 PQ: 0 ANSI: 4
+[72595.963626] sd 8:0:0:0: [sdd] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
+[72595.964104] sd 8:0:0:0: [sdd] Write Protect is off
+[72595.964108] sd 8:0:0:0: [sdd] Mode Sense: 43 00 00 00
+[72595.965025] sd 8:0:0:0: [sdd] No Caching mode page found
+[72595.965031] sd 8:0:0:0: [sdd] Assuming drive cache: write through
+[72595.967251]  sdd: sdd1
+[72595.969446] sd 8:0:0:0: [sdd] Attached SCSI removable disk

  6. Enter the command: dd if=path/to/the/ISO/file +of=/dev/sdX bs=1M

    Where X=your device name eg: +/dev/sdd

    Example: dd if=/home/user/Downloads/Mageia-6-x86_64-DVD.iso +of=/dev/sdd bs=1M

    Podpowiedź

    It might be helpful to know that if stands +for input file and of stands +for output file

  7. Enter the command: sync

  8. This is the end of the process, and you may now unplug your USB stick.

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Poprzedni   Następny
 Spis treści 
loading table of contents...
diff --git a/installer/9/pl/content/acceptLicense.html b/installer/9/pl/content/acceptLicense.html new file mode 100644 index 00000000..09b7ef30 --- /dev/null +++ b/installer/9/pl/content/acceptLicense.html @@ -0,0 +1,40 @@ + + + + + Licencja oraz informacje o wydaniughost

Licencja oraz informacje o wydaniu

Umowa Licencyjna

  • Before installing Mageia, please read the license terms and conditions +carefully.

  • These terms and conditions apply to the entire Mageia distribution and must +be accepted before you can continue.

  • To proceed, simply select Accept and then click on +Next

If you decide not to accept these conditions, then we thank you for your +interest in Mageia. Clicking Quit will reboot your +computer.

Informacje o Wydaniu

Important information about this particular Mageia release can be viewed by +clicking on the Release Notes button.

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Poprzedni   Następny
 Spis treści 
loading table of contents...
diff --git a/installer/9/pl/content/addUser.html b/installer/9/pl/content/addUser.html new file mode 100644 index 00000000..93bd1b56 --- /dev/null +++ b/installer/9/pl/content/addUser.html @@ -0,0 +1,56 @@ + + + + + User Managementghost

User Management

Ustawienie hasła administratora (root):

It is advisable for all Mageia installations to set a +superuser (Administrator) password, usually called the +root password in Linux. As you type a password into the +top box a shield will change from red-to-yellow-to-green depending on the +strength of the password. A green shield shows you are using a strong +password. You need to repeat the same password in the box underneath, to +check that the first entry was not mistyped.

Notatka

All passwords are case-sensitive. It is best to use a mixture of letters +(upper and lower case), numbers and other characters in a password.

Dodaj użytkownika

Add a User here. A regular user has fewer privileges than the +superuser (root), but enough to use the Internet, office +applications or play games and anything else the average user might use a +computer for.

  • Icon

    Click on this button if you want to change the user's icon

  • Real Name

    Insert the user's real name into this text box

  • Login Name

    Enter the user login name or let DrakX use a version of the user's real +name. The login name is case-sensitive.

  • Password

    Type in the user password. There is a shield at the end of the text box that +indicates the strength of the password. (See also Notatka)

    Password (again): Retype the user +password. DrakX will check that you have not mistyped the password.

Notatka

Any users added while installing Mageia, will have a home directory that is +both read and write protected (umask=0027)

You can add any extra needed users in the Configuration - +Summary step during the install. Choose User +management.

Ustawienia dostępu mogą być również zmienione po instalacji.

User Management (advanced)

The Advanced option allows you to edit further settings +for the user you are adding.

  • Shell: This drop-down list allows you to change the +shell available to any user you added in the previous screen. Options are +Bash, Dash and Sh

  • User ID: Here you can set the user ID for any user you +added in the previous screen. If you are unsure what the purpose of this is, +then leave it blank.

  • Group ID: This lets you set the group ID. Again, if +unsure, leave it blank.

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Poprzedni   Następny
 Spis treści 
loading table of contents...
diff --git a/installer/9/pl/content/configureServices.html b/installer/9/pl/content/configureServices.html new file mode 100644 index 00000000..a668d355 --- /dev/null +++ b/installer/9/pl/content/configureServices.html @@ -0,0 +1,36 @@ + + + + + Konfiguracja usługghost

Konfiguracja usług

Here you can choose which services should start when you boot your system.

  • Click on a triangle to expand a group to all the relevant services. The +settings DrakX chose are usually good.

  • Jeżeli zaznaczysz usługę, niektóre informacje o niej pokażą w okienku +poniżej.

Zmień to tylko i wyłącznie wtedy, kiedy wiesz co robisz.

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Poprzedni   Następny
 Spis treści 
loading table of contents...
diff --git a/installer/9/pl/content/diskPartitioning.html b/installer/9/pl/content/diskPartitioning.html new file mode 100644 index 00000000..01dfa7af --- /dev/null +++ b/installer/9/pl/content/diskPartitioning.html @@ -0,0 +1,114 @@ + + + + + Partitioningghost

Partitioning

Suggested Partitioning

In this screen you can see the content of your hard drive(s) along with the +DrakX partitioning proposals for where to install Mageia.

The actual options available from those shown below will vary according to +the layout and content of your particular hard drive(s).

Main Options

  • Use Existing Partitions

    Jeśli dostępna jest ta opcja, oznacza to że zostały znalezione partycje +linuksowe i mogą być użyte do instalacji.

  • Use Free Space

    Jeśli posiadasz nieużywane miejsce na dysku (niesformatowane), może być ono +wykorzystane do instalacji Magei.

  • Use Free Space on a Windows Partition

    If you have unused space on an existing Windows partition, the installer may +offer to use it. This can be a useful way of making room for your new Mageia +installation, but is a risky operation so you should make sure you have +backed up all important files!

    With this option, the installer displays the remaining Windows partition in +light blue and the proposed Mageia partition in dark blue with their +intended sizes just underneath. You have the option to modify these sizes by +clicking and dragging the gap between both partitions. See the following +screenshot:

  • Erase and use Entire Disk

    This option will allocate the entire drive for Mageia

    Ostrzeżenie

    This will erase ALL data on the selected hard drive. Take care! If you +intend to use part of the disk for something else, or you already have data +on the drive that you are not prepared to lose, then do not use this option.

    WAŻNE

    Zauważ, że ta metoda spowoduje zmniejszenie rozmiaru partycji +Windows. Partycja musi być "czysta", co oznacza, że Windows musi być +poprawnie zamknięty za ostatnim razem gdy był używany. Musi być także +zdefragmentowany, choć to nie daje pewności że wszystkie pliki zostały +przesunięte poza obszar dysku, który zostanie użyty. Dlatego też bardzo +wskazane jest zrobienie kopii zapasowej ważnych plików.

  • Custom Disk Partitioning

    Ta opcja daje Ci całkowitą kontrolę nad sposobem przeprowadzenia instalacji.

If you are not using the Custom disk partitioning +option, then the installer will allocate the available space according to +the following rules:

  • If the total available space is less than 50 GB, then only one partition is +created. This will be the / (root) partition.

  • If the total available space is greater than 50 GB, then three partitions +are created

    • 6/19 of the total available place is allocated to / +with a maximum of 50 GB

    • 1/19 is allocated to swap with a maximum of 4 GB

    • the rest (at least 12/19) is allocated to /home

This means that from 160 GB or greater available space, the installer will +create three partitions:

  • 50 GB for /

  • 4 GB for swap

  • and the remainder for /home

Notatka

If you are using a UEFI system, the ESP (EFI System Partition) will be +automatically detected - or created if it does not exist yet - and mounted +on /boot/EFI. The Custom disk +partitioning option is the only one that allows to check it has +been correctly done.

If you are using a Legacy (also known as BIOS) system with a GPT partitioned +disk, you need to create a BIOS boot partition if it doesn't already +exist. It should be about 1 MiB with no mount point. It can be created with +the Installer, under Custom disk partitioning, like any +other partition. Be sure to select „BIOS boot partition” for +filesystem type.

See DiskDrake for information on how to proceed.

WAŻNE

Some newer drives are now using 4096 byte logical sectors, instead of the +previous standard of 512. Due to lack of available hardware, the +partitioning tool used in the installer has not been tested with such a +drive.

Some SSD devices now use an erase block size over 1 MB. If you have such a +device we suggest that you partition the drive in advance, using an +alternative partitioning tool like gparted, and to use the following +settings:

  • Align to = MiB

  • Free space preceding (MiB) = 2

Also make sure all partitions are created using an even number of megabytes.

Wybierz punkty montowania

Here you see the Linux partitions that have been found on your computer. If +you don't agree with the DrakX suggestions, you can change the mount points +yourself.

  • To the left of the drop-down menus is a list of available partitions. For +example: sda is a hard drive - and +5 is a partition number, followed +by the (capacity, mount point, filesystem type) of the +partition.

  • If you have several partitions, you can choose various different +mount points from the drop down menu, such as +/, /home and +/var. You can even make your own mount points, for +instance /video for a partition where you want to store +your films, or perhaps /Data for all your data files.

  • For any partitions that you don't need to make use of, you can leave the +mount point field blank.

Ostrzeżenie

If you make any changes here, ensure you still have a / +(root) partition.

Podpowiedź

If you are not sure what to choose, click Previous to +go back and then tick Custom disk partitioning, where +you can click on a partition to see its type and size.

If you are sure the mount points are correct, click on +Next, and choose whether you only want to format the +partition suggested by DrakX, or more.

Formatowanie twardego dysku

  • Click on Previous if you are at all unsure about your +choice.

  • Click on Next to proceed if you are sure that it is OK +to erase every partition, every operating system and all +data that might be on that hard disk.

Custom Disk Partitioning with DiskDrake

  • Modify the layout of your disk(s) here. You can remove or create partitions, +change the filesystem or size of a partition and even view their details +before you start.

  • There is a tab at the top for every detected hard disk (or other storage +device, like a USB key). In the screenshot above there are two available +devices: sda and sdb.

  • For all other actions: click on the desired partition first. Then view it, +or choose a filesystem and a mount point, resize it or wipe +it. Expert mode provides more options such as to label +(name) a partition, or to choose a partition type.

  • Continue until you have adjusted everything to your satisfaction, then click +Done when you're ready.

Ostrzeżenie

  1. Take care with the Clear all option, use it only if you +are sure you want to wipe all partitions on the selected storage device.

  2. If you wish to use encryption on your / partition you +must ensure that you have a separate /boot +partition. The encryption option for the /boot +partition must NOT be set, otherwise your system will be unbootable.

WAŻNE

  • If you are installing Mageia on a UEFI system, check that an ESP (EFI System +Partition) is present and correctly mounted on +/boot/EFI. See Figure 1 below.

  • If you are installing Mageia on a Legacy/GPT system, check that a BIOS boot +partition is present and of the correct type. See Figure 2 below.

Rysunek 1. EFI System Partition

EFI System Partition

Rysunek 2. BIOS boot partition

BIOS boot partition

Formatowanie

Here you can choose which partition(s) you wish to format. Any data on +partitions not marked for formatting will be preserved.

Usually, at least the partitions that DrakX selected need to be formatted.

Click on Advanced to choose the partitions you want to +check for so-called bad blocks

Podpowiedź

If you're not sure you have made the right choice, you can click on +Previous, again on Previous and +then on Custom to get back to the main screen, where +you can choose to view details of your partitions.

When you are confident about the selections, click on +Next to continue.

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Poprzedni   Następny
 Spis treści 
loading table of contents...
diff --git a/installer/9/pl/content/draft.png b/installer/9/pl/content/draft.png new file mode 100644 index 00000000..59673fe1 Binary files /dev/null and b/installer/9/pl/content/draft.png differ diff --git a/installer/9/pl/content/exitInstall.html b/installer/9/pl/content/exitInstall.html new file mode 100644 index 00000000..4f96b28e --- /dev/null +++ b/installer/9/pl/content/exitInstall.html @@ -0,0 +1,38 @@ + + + + + Gratulacjeghost

Gratulacje

You have finished installing and configuring Mageia and it is now safe to +remove the installation medium and reboot your computer.

After rebooting, you can use the bootloader screen to choose which operating +system to start (if there are more than one on your computer).

If you didn't adjust the settings for the bootloader, your Mageia install +will be automatically selected and started.

Enjoy!

Visit www.mageia.org/en/ +if you have any questions or want to contribute to Mageia

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Poprzedni   Następny
 Spis treści 
loading table of contents...
diff --git a/installer/9/pl/content/firewall.html b/installer/9/pl/content/firewall.html new file mode 100644 index 00000000..da127473 --- /dev/null +++ b/installer/9/pl/content/firewall.html @@ -0,0 +1,54 @@ + + + + + Firewallghost

Firewall

This section allows you to configure some simple firewall rules: they +determine which type of message from the Internet will be accepted by the +target system. This, in turn, allows the corresponding services on the +system to be accessible from the Internet.

In the default setting (no button is checked), no service of the system is +accessible from the network. The Everything (no +firewall) option enables access to all services of the machine - +an option that does not make much sense in the context of the installer +since it would create a totally unprotected system. Its veritable use is in +the context of the Mageia Control Center (which uses the same GUI layout) +for temporarily disabling the entire set of firewall rules for testing and +debugging purposes.

All other options are more or less self-explanatory. As an example, you will +enable the CUPS server if you want printers on your machine to be accessible +from the network.

Advanced

The Advanced option opens a window where you can enable +a series of services by typing a list of „couples” (blank +separated)

<port-number>/<protocol>

- <port-number> is the value of the port assigned to +the service you want to enable (e.g. 873 for the RSYNC service) as defined +in RFC-433;
- <protocol> is one of TCP or +UDP - the internet protocol that is used by the +service.

For instance, the entry for enabling access to the RSYNC service therefore +is 873/tcp.

In case a service is implemented to use both protocols, you specify 2 +couples for the same port.

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Poprzedni   Następny
 Spis treści 
loading table of contents...
diff --git a/installer/9/pl/content/graphicalConfiguration.html b/installer/9/pl/content/graphicalConfiguration.html new file mode 100644 index 00000000..8f90ebbb --- /dev/null +++ b/installer/9/pl/content/graphicalConfiguration.html @@ -0,0 +1,82 @@ + + + + + Graphical Configurationghost

Graphical Configuration

Konfiguracja Karty Graficznej i Monitora

No matter which graphical environment (also known as desktop environment) +you chose for this install of Mageia, they are all based on a graphical user +interface system called X Window System, or simply +„X”. So in order for KDE Plasma, GNOME, LXDE or any other +graphical environment to work well, the following „X” settings +need to be correct.

Choose the appropriate settings manually if you think the details are +incorrect, or if none are shown.

  • Graphic Card

    If you need to, you can select a specific card from this expandable +list. See „Wybierz System Graficzny (Skonfiguruj swoją Kartę Graficzną)”.

  • Monitor

    You can choose Plug 'n Play, if applicable, or choose your monitor from the +Vendor or Generic lists. Choose +Custom if you prefer to manually set the horizontal and +vertical refresh rates of your monitor. See „Wybór monitora”.

  • Resolution

    The resolution and color depth of your monitor can be set here.

  • Test

    The test button does not always appear during install. If the option is +there, and you test your settings, you should be asked to confirm that your +settings are correct. If you answer Yes, the settings +will be kept. If you don't see anything, you'll return to the configuration +screen and be able to reconfigure everything until the test result is +satisfactory. If the test option is not available, then make sure your +settings are on the safe side.

  • Options

    Here you can choose to enable or disable various options.

Ostrzeżenie

There is a risk of damaging a monitor if you choose refresh rates that are +outside the frequency range of that monitor. This applies to older CRT +displays: modern monitors will reject an unsupported frequency and normally +enter standby mode.

Wybierz System Graficzny (Skonfiguruj swoją Kartę Graficzną)

DrakX posiada bardzo szeroką bazę danych kart wideo, oraz zwykle +zidentyfikuje twoje urządzenie wideo poprawnie.

Jeżeli instalator nie wykrył twojej karty graficznej poprawnie i wiesz, jaką +kartę posiadasz, możesz wybrać jedną za pomocą:

  • Vendor

  • then the make of your card

  • and the model of card

If you cannot find your card in the vendor lists (because it's not yet in +the database or it's an older card) you may find a suitable driver in the +Xorg category, which provides more than 40 generic and +open source video card drivers. If you still can't find a specific driver +for your card there is the option of using the VESA driver which provides +basic capabilities.

Uwaga!

Be aware that if you select an incompatible driver you may only have access +to the Command Line Interface

Some video card manufacturers provide proprietary drivers for Linux which +may only be available in the Nonfree repository and in +some cases only from the card manufacturers' websites. The +Nonfree repository needs to be explicitly enabled to +access them. If you didn't enable it previously, you should do this after +your first reboot.

Wybór monitora

DrakX has a very comprehensive database of monitors and will usually +correctly identify yours.

Ostrzeżenie

Selecting a monitor with different characteristics +could damage your monitor or video hardware. Please don't try something +without knowing what you are doing. If in doubt you should +consult your monitor documentation.

Własne

This option allows you to set two critical parameters: the vertical refresh +rate and the horizontal sync rate. Vertical refresh determines how often the +screen is refreshed and horizontal sync is the rate at which scan lines are +displayed.

It is VERY IMPORTANT that you do not specify a monitor +type with a sync range that is beyond the capabilities of your monitor: you +may damage your monitor. If in doubt, choose a conservative setting and +consult your monitor documentation.

Plug'n Play

This is the default option and automatically tries to determine the monitor +type from the monitor database.

Vendor

If the installer has not correctly detected your monitor and you know which +one you have, you can select it from the tree by selecting:

  • Manufacturer

  • Monitor model

Generic

Selecting this group will list nearly 30 display configurations such as +1024x768 @ 60Hz and includes flat-panel displays as used in laptops. This is +often a good monitor selection group if you need to use the VESA card driver +when your video hardware cannot be determined automatically. Once again it +may be wise to be conservative in your selections.

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Poprzedni   Następny
 Spis treści 
loading table of contents...
diff --git a/installer/9/pl/content/images/Fdisk.png b/installer/9/pl/content/images/Fdisk.png new file mode 100644 index 00000000..dd85a476 Binary files /dev/null and b/installer/9/pl/content/images/Fdisk.png differ diff --git a/installer/9/pl/content/images/Md5sum.png b/installer/9/pl/content/images/Md5sum.png new file mode 100644 index 00000000..093e047f Binary files /dev/null and b/installer/9/pl/content/images/Md5sum.png differ diff --git a/installer/9/pl/content/images/Root.png b/installer/9/pl/content/images/Root.png new file mode 100644 index 00000000..4e42b5cb Binary files /dev/null and b/installer/9/pl/content/images/Root.png differ diff --git a/installer/9/pl/content/images/dx-welcome.png b/installer/9/pl/content/images/dx-welcome.png new file mode 100644 index 00000000..78a0c8a1 Binary files /dev/null and b/installer/9/pl/content/images/dx-welcome.png differ diff --git a/installer/9/pl/content/images/dx-welcome2.png b/installer/9/pl/content/images/dx-welcome2.png new file mode 100644 index 00000000..65651d04 Binary files /dev/null and b/installer/9/pl/content/images/dx-welcome2.png differ diff --git a/installer/9/pl/content/images/dx2-add_supplemental_media.png b/installer/9/pl/content/images/dx2-add_supplemental_media.png new file mode 100644 index 00000000..0f4d9cc4 Binary files /dev/null and b/installer/9/pl/content/images/dx2-add_supplemental_media.png differ diff --git a/installer/9/pl/content/images/dx2-chooseDesktop.png b/installer/9/pl/content/images/dx2-chooseDesktop.png new file mode 100644 index 00000000..09f90690 Binary files /dev/null and b/installer/9/pl/content/images/dx2-chooseDesktop.png differ diff --git a/installer/9/pl/content/images/dx2-chooseMountpoints.png b/installer/9/pl/content/images/dx2-chooseMountpoints.png new file mode 100644 index 00000000..b41061ae Binary files /dev/null and b/installer/9/pl/content/images/dx2-chooseMountpoints.png differ diff --git a/installer/9/pl/content/images/dx2-choosePackageGroups.png b/installer/9/pl/content/images/dx2-choosePackageGroups.png new file mode 100644 index 00000000..6fdba58f Binary files /dev/null and b/installer/9/pl/content/images/dx2-choosePackageGroups.png differ diff --git a/installer/9/pl/content/images/dx2-choosePackagesTree.png b/installer/9/pl/content/images/dx2-choosePackagesTree.png new file mode 100644 index 00000000..fc0c04ec Binary files /dev/null and b/installer/9/pl/content/images/dx2-choosePackagesTree.png differ diff --git a/installer/9/pl/content/images/dx2-configureServices.png b/installer/9/pl/content/images/dx2-configureServices.png new file mode 100644 index 00000000..6b37022e Binary files /dev/null and b/installer/9/pl/content/images/dx2-configureServices.png differ diff --git a/installer/9/pl/content/images/dx2-configureTimezoneUTC.png b/installer/9/pl/content/images/dx2-configureTimezoneUTC.png new file mode 100644 index 00000000..500f84d0 Binary files /dev/null and b/installer/9/pl/content/images/dx2-configureTimezoneUTC.png differ diff --git a/installer/9/pl/content/images/dx2-configureX_card_list.png b/installer/9/pl/content/images/dx2-configureX_card_list.png new file mode 100644 index 00000000..aa18b12f Binary files /dev/null and b/installer/9/pl/content/images/dx2-configureX_card_list.png differ diff --git a/installer/9/pl/content/images/dx2-configureX_monitor.png b/installer/9/pl/content/images/dx2-configureX_monitor.png new file mode 100644 index 00000000..fc9ea7d8 Binary files /dev/null and b/installer/9/pl/content/images/dx2-configureX_monitor.png differ diff --git a/installer/9/pl/content/images/dx2-diskdrake.png b/installer/9/pl/content/images/dx2-diskdrake.png new file mode 100644 index 00000000..3dfbe510 Binary files /dev/null and b/installer/9/pl/content/images/dx2-diskdrake.png differ diff --git a/installer/9/pl/content/images/dx2-doPartitionDisks.png b/installer/9/pl/content/images/dx2-doPartitionDisks.png new file mode 100644 index 00000000..dd5cdf9e Binary files /dev/null and b/installer/9/pl/content/images/dx2-doPartitionDisks.png differ diff --git a/installer/9/pl/content/images/dx2-exitInstall.png b/installer/9/pl/content/images/dx2-exitInstall.png new file mode 100644 index 00000000..70bbf1f3 Binary files /dev/null and b/installer/9/pl/content/images/dx2-exitInstall.png differ diff --git a/installer/9/pl/content/images/dx2-formatPartitions.png b/installer/9/pl/content/images/dx2-formatPartitions.png new file mode 100644 index 00000000..93f2147f Binary files /dev/null and b/installer/9/pl/content/images/dx2-formatPartitions.png differ diff --git a/installer/9/pl/content/images/dx2-installUpdates.png b/installer/9/pl/content/images/dx2-installUpdates.png new file mode 100644 index 00000000..2407a6cb Binary files /dev/null and b/installer/9/pl/content/images/dx2-installUpdates.png differ diff --git a/installer/9/pl/content/images/dx2-license.png b/installer/9/pl/content/images/dx2-license.png new file mode 100644 index 00000000..131a8c59 Binary files /dev/null and b/installer/9/pl/content/images/dx2-license.png differ diff --git a/installer/9/pl/content/images/dx2-media_selection.png b/installer/9/pl/content/images/dx2-media_selection.png new file mode 100644 index 00000000..5df08507 Binary files /dev/null and b/installer/9/pl/content/images/dx2-media_selection.png differ diff --git a/installer/9/pl/content/images/dx2-minimal-install.png b/installer/9/pl/content/images/dx2-minimal-install.png new file mode 100644 index 00000000..268fb99b Binary files /dev/null and b/installer/9/pl/content/images/dx2-minimal-install.png differ diff --git a/installer/9/pl/content/images/dx2-selectCountry.png b/installer/9/pl/content/images/dx2-selectCountry.png new file mode 100644 index 00000000..995918db Binary files /dev/null and b/installer/9/pl/content/images/dx2-selectCountry.png differ diff --git a/installer/9/pl/content/images/dx2-selectInstallClass.png b/installer/9/pl/content/images/dx2-selectInstallClass.png new file mode 100644 index 00000000..e40691a5 Binary files /dev/null and b/installer/9/pl/content/images/dx2-selectInstallClass.png differ diff --git a/installer/9/pl/content/images/dx2-selectLanguage.png b/installer/9/pl/content/images/dx2-selectLanguage.png new file mode 100644 index 00000000..b5304d3d Binary files /dev/null and b/installer/9/pl/content/images/dx2-selectLanguage.png differ diff --git a/installer/9/pl/content/images/dx2-selectMouse.png b/installer/9/pl/content/images/dx2-selectMouse.png new file mode 100644 index 00000000..22eeac12 Binary files /dev/null and b/installer/9/pl/content/images/dx2-selectMouse.png differ diff --git a/installer/9/pl/content/images/dx2-setRootPassword.png b/installer/9/pl/content/images/dx2-setRootPassword.png new file mode 100644 index 00000000..00a69439 Binary files /dev/null and b/installer/9/pl/content/images/dx2-setRootPassword.png differ diff --git a/installer/9/pl/content/images/dx2-setupBootloader.png b/installer/9/pl/content/images/dx2-setupBootloader.png new file mode 100644 index 00000000..b4f874f4 Binary files /dev/null and b/installer/9/pl/content/images/dx2-setupBootloader.png differ diff --git a/installer/9/pl/content/images/dx2-setupSCSI.png b/installer/9/pl/content/images/dx2-setupSCSI.png new file mode 100644 index 00000000..8e688044 Binary files /dev/null and b/installer/9/pl/content/images/dx2-setupSCSI.png differ diff --git a/installer/9/pl/content/images/dx2-soundConfig.png b/installer/9/pl/content/images/dx2-soundConfig.png new file mode 100644 index 00000000..d9293252 Binary files /dev/null and b/installer/9/pl/content/images/dx2-soundConfig.png differ diff --git a/installer/9/pl/content/images/dx2-summaryBottom.png b/installer/9/pl/content/images/dx2-summaryBottom.png new file mode 100644 index 00000000..3fa49259 Binary files /dev/null and b/installer/9/pl/content/images/dx2-summaryBottom.png differ diff --git a/installer/9/pl/content/index.html b/installer/9/pl/content/index.html new file mode 100644 index 00000000..4be1e495 --- /dev/null +++ b/installer/9/pl/content/index.html @@ -0,0 +1,38 @@ + + + + + Instalacja za pomocą DrakXghost

Notatka

Nikt nie zobaczy wszystkich zrzutów ekranu zaprezentowanych w tym +manualu. To które ekrany zobaczysz zależy od tego jaki posiadasz sprzęt oraz +jakich wyborów dokonasz podczas instalacji.

Tekst oraz zrzuty ekranu są dostępne na licencji CC BY-SA 3.0 http://creativecommons.org/licenses/by-sa/3.0/.

Ten dokument został stworzony przy pomocy Calenco CMS rozwijanego przez NeoDoc.

Dokumentacja została napisana przez wolontariuszy w ich wolnym czasie. Jeśli +chcesz pomóc poprawić dokumentację skontaktuj się z Zespołem +Dokumentacji,

Zawartości

Wybierz i użyj obrazu ISO
Wprowadzenie
Nośnik
Pobieranie i Sprawdzanie Mediów
Wypal lub zrzuć obraz ISO
DrakX instalator Mageia
Etapy instalacji
Ekran powitalny instalatora
Problemy z instalacją oraz możliwe rozwiązania
Wybór języka
Licencja oraz informacje o wydaniu
Umowa Licencyjna
Informacje o Wydaniu
Wykrywanie SCSI
Instalacja czy uaktualnienie
Klawiatura
Partitioning
Suggested Partitioning
Wybierz punkty montowania
Formatowanie twardego dysku
Custom Disk Partitioning with DiskDrake
Formatowanie
Software
Media Selection
Wybór pulpitu
Wybór grup pakietów
Minimalna instalacja
Samodzielny wybór pakietów
User Management
Ustawienie hasła administratora (root):
Dodaj użytkownika
User Management (advanced)
Graphical Configuration
Konfiguracja Karty Graficznej i Monitora
Wybierz System Graficzny (Skonfiguruj swoją Kartę Graficzną)
Wybór monitora
Bootloader
Grub2
Bootloader Setup
Other Options
Configuration Summary
Parametry systemu
Parametry sprzętu
Network and Internet parameters
Bezpieczeństwo
Locale
Konfiguruj strefę czasową
Wybierz twój Kraj / Region
Konfiguracja usług
Wybierz mysz
Konfiguracja dźwięku
Zaawansowane
Poziom bezpieczeństwa
Firewall
Aktualizacje
Gratulacje
Usuwanie Magei
© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
   Następny
loading table of contents...
diff --git a/installer/9/pl/content/installUpdates.html b/installer/9/pl/content/installUpdates.html new file mode 100644 index 00000000..5bd6a2d4 --- /dev/null +++ b/installer/9/pl/content/installUpdates.html @@ -0,0 +1,36 @@ + + + + + Aktualizacjeghost

Aktualizacje

Since this version of Mageia was released, some packages will have been +updated or improved.

  • Select Yes if you wish to download and install them

  • Select No if you don't want to do this now, or if you +aren't connected to the Internet

  • Press Next to continue

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Poprzedni   Następny
 Spis treści 
loading table of contents...
diff --git a/installer/9/pl/content/installer.html b/installer/9/pl/content/installer.html new file mode 100644 index 00000000..94ba2d82 --- /dev/null +++ b/installer/9/pl/content/installer.html @@ -0,0 +1,78 @@ + + + + + DrakX instalator Mageiaghost

DrakX instalator Mageia

Niezależnie czy jesteś początkującym, czy zaawansowanym użytkownikiem +GNU-Linuxa, instalator Magei jest zaprojektowany tak, aby uczynić instalację +lub aktualizację łatwą i przyjemną.

Etapy instalacji

  • The install process is divided into a number of steps - the status of which +is indicated in a panel to the left of the screen.

  • Each step has one or more screens, which may also have +Advanced sections with extra, less commonly required +options.

  • Most screens have Help buttons for further details +about the particular step.

Uwaga!

If at some point during the install you decide to abort the installation, it +is possible to reboot, but please think twice before you do this. Once a +partition has been formatted or updates have started to be installed, your +computer is no longer in the same state and rebooting it could very well +leave you with an unusable system.

If, in spite of this, you are very sure rebooting is what you want, go to a +text terminal by pressing the keys Ctrl+Alt+F2 together. After that, +press Ctrl+Alt+Delete together to reboot.

Ekran powitalny instalatora

The particular screen that you will first see when booting from the +Installation media will depend on whether your computer motherboard is of +the Legacy (BIOS) or UEFI type.

The welcome menu screen has various options, however the default option will +start the installer, and is normally all that you will need.

Legacy (BIOS) Systems

Menu

  • Install Mageia

    Install Mageia to a hard disk. This is the default option, and will +automatically start after a short while unless another option is selected.

  • Rescue System

    This option allows you to either re-install the bootloader for an existing +Mageia installation or you can use it to restore a Windows bootloader.

  • Memory Test

    Test the installed RAM by performing multiple read and write +operations. Reboot to end the test.

  • F2: Language

    Press F2 for alternative languages.

UEFI Systems

From this screen, you can access options by pressing e to +enter the edit mode. To come back to this screen, press Esc +to quit without saving or press F10 to save and quit.

Menu

  • Install: Start the Install process

  • Rescue: This option allows you to either +re-install the bootloader for an existing Mageia installation or you can use +it to restore a Windows bootloader.

  • F2: Language: Press F2 for +alternative languages.

If you booted from a USB stick, you will see the above options duplicated, +and in this case, you should use the set that will be suffixed with "USB".

Problemy z instalacją oraz możliwe rozwiązania

Brak graficznego interfejsu

  • After the initial screen you did not progress to the Language +Selection screen. This can happen with some graphic cards and +older systems. Try using low resolution by typing vgalo +at the prompt.

  • If the hardware is very old, a graphical installation may not be +possible. In this case it is worth trying a text-mode installation. To use +this press Esc at the Welcome screen +and confirm with ENTER. You will be presented with a black +screen with a boot: prompt. Type text +and press ENTER to continue with the installation in text +mode.

Zawieszenie się instalacji

If the system appeared to freeze during the installation, this may be a +problem with hardware detection. In this case the automatic hardware +detection may be bypassed and dealt with later. To try this, type +noauto at the prompt. This option may also be combined +with other parameters as necessary.

Problem z pamięcią RAM

This will rarely be needed, but in some cases the hardware may report the +available RAM incorrectly. To specify this manually, you can use the +mem=xxxM parameter, where +xxx is the correct amount of +RAM. e.g. mem=256M would specify 256MB of RAM.

Dynamiczne partycje

If you converted your hard disk from Basic format to +Dynamic format in Microsoft Windows, then it is not +possible to install Mageia on this disc. To revert to a +Basic disk, see the Microsoft documentation: http://msdn.microsoft.com/en-us/library/cc776315.aspx.

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Poprzedni   Następny
 Spis treści 
loading table of contents...
diff --git a/installer/9/pl/content/locale.html b/installer/9/pl/content/locale.html new file mode 100644 index 00000000..a62df7b0 --- /dev/null +++ b/installer/9/pl/content/locale.html @@ -0,0 +1,50 @@ + + + + + Localeghost

Locale

Konfiguruj strefę czasową

  • Choose your timezone by choosing your country, or a city close to you in the +same timezone.

In the next screen you can choose to set your hardware clock to local time +or to GMT, also known as UTC.

Notatka

Jeżeli posiadasz więcej niż jeden system operacyjny na swoim komputerze +upewnij się, że wszystkie mają ustawiony czas lokalny, albo UTC/GMT.

Wybierz twój Kraj / Region

  • Select your country or region. This is important for all kinds of settings, +like the currency and wireless regulatory domain. Setting the wrong country +can lead to being unable to use a Wireless network.

  • If your country isn't in the list, click the Other +Countries option and choose your country / region there.

Notatka

If your country is only in the Other Countries list, +after clicking OK it may seem that a country from the +main list was chosen. Despite this, DrakX will actually apply your choice.

Metoda wejścia

In the Other Countries screen you can also select an +input method (at the bottom of the list). Input methods allow users to input +multilingual characters (Chinese, Japanese, Korean, etc). IBus is the +default input method, so users should not need to configure it +manually. Other input methods (SCIM, GCIN, HIME, etc) also provide similar +functions and can be installed if you added HTTP/FTP media before package +selection.

Notatka

If you missed the input method setup during installation, you can access it +post-install via Configure your Computer → System, or by running +localedrake as root.

© Mageia
CC BY-SA 3.0
Uploaded on 11/06/2023
Poprzedni   Następny
 Spis treści 
loading table of contents...
diff --git a/installer/9/pl/content/loupe.svg b/installer/9/pl/content/loupe.svg new file mode 100644 index 00000000..fc5c33ca --- /dev/null +++ b/installer/9/pl/content/loupe.svg @@ -0,0 +1,22 @@ + + + + + + + image/svg+xml + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/installer/9/pl/content/main.js b/installer/9/pl/content/main.js new file mode 100644 index 00000000..457dfe1a --- /dev/null +++ b/installer/9/pl/content/main.js @@ -0,0 +1,255 @@ +/* global stemmer */ + +/** + * Miscellaneous js functions for WebHelp + * Kasun Gajasinghe, http://kasunbg.blogspot.com + * David Cramer, http://www.thingbag.net + * + */ + +function adjust(){ + var headerHeight = $("#header").outerHeight( true ); + $("#leftnavigation").css('top' , headerHeight); + if(document.body.clientWidth >= 701) + $("#content").css('top' , headerHeight+'px'); + else + $("#content").css('top' , 0+'px'); +} + +$( window ).resize(function() { + adjust(); +}); + +$(document).ready(function() { + adjust(); + + var href = window.location.href; + var indexOfTermToSearch = href.indexOf('?search='); + if (indexOfTermToSearch !== -1) + { + var term = decodeURI(href.substring(indexOfTermToSearch+8)); + $('#textToSearch').val(term); + document.cookie='textToSearch='+term; + searchHighlight(term); + } + + $(function() { + $("#tabs").tabs({ + cookie: { + expires: 2 + } + }); + }); + + //Generate the tree + $("#ulTreeDiv").attr("style",""); + $("#tree").treeview({ + collapsed: true, + animated: "medium", + control: "#sidetreecontrol", + persist: "cookie" + }); + + //after toc fully styled, display it. Until loading, a 'loading' image will be displayed + $("#tocLoading").attr("style","display:none;"); + //$("#ulTreeDiv").attr("style","display:block;"); + + //.searchButton is the css class applied to 'Go' button + $(function() { + $("button", ".searchButton").button(); + + $("button", ".searchButton").click(function() {return false;}); + }); + + //'ui-tabs-1' is the cookie name which is used for the persistence of the tabs.(Content/Search tab) + if ($.cookie('ui-tabs-1') === '1') { //search tab is visible + let textToSearch = $.cookie('textToSearch') ; + if ( textToSearch !== undefined && textToSearch !== null && textToSearch.length > 0) { + document.getElementById('textToSearch').value = $.cookie('textToSearch'); + Verifie('diaSearch_Form'); + + var hcookie = selectTxtToHigh() ; + searchHighlight(hcookie); + } + } + + syncToc(); //Synchronize the toc tree with the content pane, when loading the page. + //$("#doSearch").button(); //add jquery button styling to 'Go' button +}); + +function selectTxtToHigh() { + var allCookies = document.cookie.split(";"); + var hcookie; + for (var iCookie = 0; iCookie < allCookies.length; iCookie++) { + var cookie = allCookies[iCookie]; + var indexOfEq = cookie.indexOf('='); + var key = cookie.substring(0, indexOfEq); + if (key.includes( "highlight")){ + hcookie = cookie.substring(indexOfEq + 1); + } + } + return hcookie; +} + + +/** + * Synchronize with the tableOfContents + */ + +function syncToc() { + var tocid = document.getElementById("zz_current-id").getAttribute("data-id"); + var a = document.getElementById(tocid); + + if (a !== undefined && a !== null ) { + //Expanding the child sections of the selected node. + var nodeClass = a.getAttribute("class"); + if (nodeClass !== null && !nodeClass.match(/collapsable/)) { + a.setAttribute("class", "collapsable"); + //remove display:none; css style from