From 0545a2ccb5b787c0ee161d290ff0821992f7685f Mon Sep 17 00:00:00 2001 From: Papoteur Date: Thu, 11 Mar 2021 19:05:38 +0100 Subject: Adding or refreshing draklive in en --- draklive/8/en/content/ar01s02.html | 66 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 draklive/8/en/content/ar01s02.html (limited to 'draklive/8/en/content/ar01s02.html') diff --git a/draklive/8/en/content/ar01s02.html b/draklive/8/en/content/ar01s02.html new file mode 100644 index 00000000..c1606b68 --- /dev/null +++ b/draklive/8/en/content/ar01s02.html @@ -0,0 +1,66 @@ + + + + + Boot Mageia as Live system

Boot Mageia as Live system

Booting the medium

You can boot directly from a Live DVD or USB. Usually, you just need + to plug the USB device in or place the DVD in the drive and restart the + computer.

If the computer does not automatically boot from the USB or DVD you + may need to reconfigure your BIOS Boot Disk priority. Alternatively, you + might try accessing the boot device menu to select a device from which the + computer will boot.

Tip

To access the BIOS or boot menu when the computer is starting, you + can try pressing either F2, Del or + Esc for the BIOS, or Esc, + F8, F10 or F11 for + the boot device menu. These (fairly common) keys are just a selection of + possible options though.

Note

The actual screen that you will first see when booting from the + Live media will depend on whether your computer motherboard is of the + Legacy (BIOS) or UEFI type.

In BIOS/CSM/Legacy mode

First screen while booting in BIOS mode

Menu

  • Boot Mageia

    This option will boot the Mageia Live system from the connected + DVD/USB media (expect a very slow system compared to an installed + OS).

    Once the boot is done, you can proceed to the + installation.

    • + use non-free video drivers (slower + to boot)

      Boot the Mageia Live system using non-free video + drivers

  • Install Mageia

    This option will install Mageia to a hard disk.

    • + use non-free video drivers (slower + to boot)

      Install Mageia using non-free video drivers

  • Memory Test

    Test the installed RAM by performing multiple read and write + operations. Reboot to end the test.

  • F2 Language

    Press F2 to have the installer use a specific + language during the installation. Use the arrow keys to select the + language then press Enter.

In UEFI mode

First screen while booting in UEFI mode

Menu

  • Boot Mageia

    This option will boot the Mageia Live system from the connected + DVD/USB media (expect a very slow system compared to an installed OS). + Once the boot is done, you can proceed to the installation

  • Install Mageia

    This option will install Mageia to a hard disk.

  • F2 Language

    Press F2 to have the installer use a specific + language during the installation. Use the arrow keys to select the + language then press Enter.

Note

If you booted from a USB stick, you will see the above menu + options duplicated, and in this case, you should choose from the menu + pair that will be suffixed with "USB".

© Mageia
CC BY-SA 3.0
Uploaded on 11/03/2021
Prev   Next
 Home 
-- cgit v1.2.1