From 8ccedf9de3cef232e82e5b5fce699266a8f1a5ce Mon Sep 17 00:00:00 2001 From: Papoteur Date: Sun, 2 Oct 2016 20:55:29 +0200 Subject: Adding draklive in sl --- draklive/5/sl/content/setupBootloader.html | 65 ++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) create mode 100644 draklive/5/sl/content/setupBootloader.html (limited to 'draklive/5/sl/content/setupBootloader.html') diff --git a/draklive/5/sl/content/setupBootloader.html b/draklive/5/sl/content/setupBootloader.html new file mode 100644 index 00000000..fbf42d58 --- /dev/null +++ b/draklive/5/sl/content/setupBootloader.html @@ -0,0 +1,65 @@ + + + + + Glavne možnosti zagonskega nalagalnika

Glavne možnosti zagonskega nalagalnika

With a Bios system

If you prefer different bootloader settings to those chosen automatically by +the installer, you can change them here.

You may already have another operating system on your machine, in which case +you need to decide whether to add Mageia to your existing bootloader, or +allow Mageia to create a new one.

Namig

The Mageia graphical menus are nice :

Using a Mageia bootloader

By default, Mageia writes a new GRUB (legacy) bootloader into the MBR +(Master Boot Record) of your first hard drive. If you already have other +operating systems installed, Mageia attempts to add them to your new Mageia +boot menu.

Mageia now also offers GRUB2 as an optional bootloader in addition to GRUB +legacy and Lilo.

Pozor

Linux systems which use the GRUB2 bootloader are not currently supported by +GRUB (legacy) and will not be recognized if the default GRUB bootloader is +used.

The best solution here is to use the GRUB2 bootloader which is available at +the Summary page during installation.

Using an existing bootloader

If you decide to use an existing bootloader then you will need to remember +to STOP at the summary page during the installation and click the Bootloader +Configure button, which will allow you to change the +bootloader install location.

Do not select a device e.g."sda", or you will overwrite your existing +MBR. You must select the root partition that you chose during the +partitioning phase earlier, e.g. sda7.

To be clear, sda is a device, sda7 is a partition on that device.

Namig

Go to tty2 with Ctrl+Alt+F2 and type df to check where +your / (root) partition is. Ctrl+Alt+F7 takes you back to +the installer screen.

The exact procedure for adding your Mageia system to an existing bootloader +is beyond the scope of this help, however in most cases it will involve +running the relevant bootloader installation program which should detect and +add it automatically. See the documentation for the operating system in +question.

Napredne možnosti zagonskega nalagalnika

If you have very limited disk space for the / partition +that contains /tmp, click on +Advanced and check the box for Clean /tmp +at each boot. This helps to maintain some free space.

With an UEFI system

With an UEFI system, the user interface is slightly different as you cannot +choose the boot loader since only Grub2-efi is available.

If Mageia is the first system installed on your computer, the installer +created an ESP (EFI System Partition) to receive the bootloader +(Grub2-efi). If there was already UEFI operating systems previously +installed on your computer (Windows 8 for example), the Mageia installer +detected the existing ESP created by Windows and added grub2-efi. Although +it is possible to have several ESPs, only one is advised and enough whatever +the number of operating systems you have.

Don't modify the "Boot Device" unless really knowing what you do.

© Mageia
CC BY-SA 3.0
Uploaded on 02/10/2016
Nazaj   Naprej
 Domov 
-- cgit v1.2.1