From 1be510f9529cb082f802408b472a77d074b394c0 Mon Sep 17 00:00:00 2001 From: Nicolas Vigier Date: Sun, 14 Apr 2013 13:46:12 +0000 Subject: Add zarb MLs html archives --- .../mageia-discuss/attachments/20110821/3f4f6e52/attachment-0001.html | 1 + zarb-ml/mageia-discuss/attachments/20110821/3f4f6e52/attachment.html | 1 + 2 files changed, 2 insertions(+) create mode 100644 zarb-ml/mageia-discuss/attachments/20110821/3f4f6e52/attachment-0001.html create mode 100644 zarb-ml/mageia-discuss/attachments/20110821/3f4f6e52/attachment.html (limited to 'zarb-ml/mageia-discuss/attachments/20110821/3f4f6e52') diff --git a/zarb-ml/mageia-discuss/attachments/20110821/3f4f6e52/attachment-0001.html b/zarb-ml/mageia-discuss/attachments/20110821/3f4f6e52/attachment-0001.html new file mode 100644 index 000000000..726f68901 --- /dev/null +++ b/zarb-ml/mageia-discuss/attachments/20110821/3f4f6e52/attachment-0001.html @@ -0,0 +1 @@ +

Envoyé depuis mon HTC

----- Reply message -----
De : "Gary Montalbine" <gmontalbine@cox.net>
Pour : "Mageia general discussions" <mageia-discuss@mageia.org>
Objet : [Mageia-discuss] Gimp printing
Date : sam., août 20, 2011 14:30





On 08/20/2011 07:35 AM, Gary Montalbine wrote:
>
> On 08/19/2011 11:09 PM, Balcaen John wrote:
>> Le Vendredi 19 Août 2011 22:59:39 Gary Montalbine a écrit :
>>> I mentioned previously that gimp and print assistant did not print the
>>> image as shown in gimp. It was redder and darker. I went back to
>>> ML2010.2 and colors match. When I reinstalled ML I was asked if I
>>> wanted to install a proprietary driver for my video card. I said yes.
>>> I don't remember seeing this in mageia. Would that make a difference
>>> in my print quality?
>> It should not make any difference to use a proprietary driver or not (but
>> you can of course install one on Mageia if you want.
>>
>> Regarding printing maybe it's related to a misconfiguration of the
>> printer (like a wrong color profile used )
>>
>> Regards,
>
> I am strictly a user. Any printer setup has to be program related. I use
> both MCC > printer and HP device manager to check it. I know nothing of
> color profiles. The install program needs to do what is necessary to
> make it work properly. At this point I am forced to stay with ML until I
> have at least finished my printing. One other related printer problem in
> Mageia is that when I turned the printer off the program tries to reboot
> and freezes up. I have to either remove the usb plug or close my open
> programs.
> Thanks, Gary

P.S. I noticed that the printed pictures in ML are slightly lighter that shown in Gimp. Is there some type of program that calibrates printer with monitor?
Thanks, Gary

\ No newline at end of file diff --git a/zarb-ml/mageia-discuss/attachments/20110821/3f4f6e52/attachment.html b/zarb-ml/mageia-discuss/attachments/20110821/3f4f6e52/attachment.html new file mode 100644 index 000000000..726f68901 --- /dev/null +++ b/zarb-ml/mageia-discuss/attachments/20110821/3f4f6e52/attachment.html @@ -0,0 +1 @@ +

Envoyé depuis mon HTC

----- Reply message -----
De : "Gary Montalbine" <gmontalbine@cox.net>
Pour : "Mageia general discussions" <mageia-discuss@mageia.org>
Objet : [Mageia-discuss] Gimp printing
Date : sam., août 20, 2011 14:30





On 08/20/2011 07:35 AM, Gary Montalbine wrote:
>
> On 08/19/2011 11:09 PM, Balcaen John wrote:
>> Le Vendredi 19 Août 2011 22:59:39 Gary Montalbine a écrit :
>>> I mentioned previously that gimp and print assistant did not print the
>>> image as shown in gimp. It was redder and darker. I went back to
>>> ML2010.2 and colors match. When I reinstalled ML I was asked if I
>>> wanted to install a proprietary driver for my video card. I said yes.
>>> I don't remember seeing this in mageia. Would that make a difference
>>> in my print quality?
>> It should not make any difference to use a proprietary driver or not (but
>> you can of course install one on Mageia if you want.
>>
>> Regarding printing maybe it's related to a misconfiguration of the
>> printer (like a wrong color profile used )
>>
>> Regards,
>
> I am strictly a user. Any printer setup has to be program related. I use
> both MCC > printer and HP device manager to check it. I know nothing of
> color profiles. The install program needs to do what is necessary to
> make it work properly. At this point I am forced to stay with ML until I
> have at least finished my printing. One other related printer problem in
> Mageia is that when I turned the printer off the program tries to reboot
> and freezes up. I have to either remove the usb plug or close my open
> programs.
> Thanks, Gary

P.S. I noticed that the printed pictures in ML are slightly lighter that shown in Gimp. Is there some type of program that calibrates printer with monitor?
Thanks, Gary

\ No newline at end of file -- cgit v1.2.1