From 1be510f9529cb082f802408b472a77d074b394c0 Mon Sep 17 00:00:00 2001 From: Nicolas Vigier Date: Sun, 14 Apr 2013 13:46:12 +0000 Subject: Add zarb MLs html archives --- zarb-ml/mageia-discuss/20110911/005217.html | 182 ++++++++++++++++++++++++++++ 1 file changed, 182 insertions(+) create mode 100644 zarb-ml/mageia-discuss/20110911/005217.html (limited to 'zarb-ml/mageia-discuss/20110911/005217.html') diff --git a/zarb-ml/mageia-discuss/20110911/005217.html b/zarb-ml/mageia-discuss/20110911/005217.html new file mode 100644 index 000000000..655fcc8d8 --- /dev/null +++ b/zarb-ml/mageia-discuss/20110911/005217.html @@ -0,0 +1,182 @@ + + + + [Mageia-discuss] [Mageia-dev] hplip update in progress - feedback needed + + + + + + + + + +

[Mageia-discuss] [Mageia-dev] hplip update in progress - feedback needed

+ Doug Lytle + support at drdos.info +
+ Sun Sep 11 14:53:11 CEST 2011 +

+
+ +
+Florian Hubold wrote:
+> How did it fail and what were the exact error messages? 
+
+Okay,
+
+I had time this morning to go over this.  I started out with a urpmi 
+--auto --auto-select --auto-update
+
+After it pulled down an additional 115 packages,I reboot.
+
+I plugged in the LaserJet P1006 and and the printer loaded it's 
+firmware, got the following log entries:
+
+Sep 11 08:40:32 laptop kernel: usb 2-1.3: new high speed USB device 
+number 5 using ehci_hcd
+Sep 11 08:40:32 laptop mtp-probe: checking bus 2, device 5: 
+"/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3"
+Sep 11 08:40:32 laptop kernel: usb 2-1.3: New USB device found, 
+idVendor=03f0, idProduct=3e17
+Sep 11 08:40:32 laptop kernel: usb 2-1.3: New USB device strings: Mfr=1, 
+Product=2, SerialNumber=3
+Sep 11 08:40:32 laptop kernel: usb 2-1.3: Product: HP LaserJet P1006
+Sep 11 08:40:32 laptop kernel: usb 2-1.3: Manufacturer: Hewlett-Packard
+Sep 11 08:40:32 laptop kernel: usb 2-1.3: SerialNumber: AC2A46G
+Sep 11 08:40:32 laptop mtp-probe: bus: 2, device: 5 was not an MTP device
+Sep 11 08:40:32 laptop logger: loading hp_laserjet_p1006 firmware 002 005
+Sep 11 08:40:33 laptop udev-configure-printer: add 
+/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0
+Sep 11 08:40:33 laptop udev-configure-printer: device devpath is 
+/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3
+Sep 11 08:40:33 laptop udev-configure-printer: Device vendor/product is 
+03F0:3E17
+Sep 11 08:40:33 laptop udev-configure-printer: MFG:Hewlett-Packard 
+MDL:HP LaserJet P1006 SERN:- serial:AC2A46G
+Sep 11 08:40:33 laptop udev-configure-printer: CheckAndInstallDrivers()
+Sep 11 08:40:33 laptop hp-firmware: hp-firmware[4420]: warning: No 
+display found.
+Sep 11 08:40:33 laptop hp-firmware: hp-firmware[4420]: error: 
+hp-firmware -u/--gui requires Qt4 GUI support. Entering interactive mode.
+Sep 11 08:40:33 laptop udev-configure-printer: CheckInstalledDrivers()
+Sep 11 08:40:34 laptop udev-configure-printer: SERN field matches USB 
+serial number
+Sep 11 08:40:34 laptop udev-configure-printer: URI match: 
+hp:/usb/HP_LaserJet_P1006?serial=AC2A46G
+Sep 11 08:40:34 laptop udev-configure-printer: URI contains USB serial 
+number
+Sep 11 08:40:34 laptop udev-configure-printer: URI match: 
+usb://HP/LaserJet%20P1006?serial=AC2A46G
+Sep 11 08:40:34 laptop udev-configure-printer: URI of print queue: 
+hp:/usb/HP_LaserJet_P1006?serial=AC2A46G, normalized: laserjet p1006 
+serial ac2a46g
+Sep 11 08:40:34 laptop udev-configure-printer: URI of detected printer: 
+hp:/usb/HP_LaserJet_P1006?serial=AC2A46G, normalized: laserjet p1006 
+serial ac2a46g
+Sep 11 08:40:34 laptop udev-configure-printer: Queue 
+ipp://localhost/printers/HP_LaserJet_P1006 has matching device URI
+Sep 11 08:40:34 laptop udev-configure-printer: URI of detected printer: 
+usb://HP/LaserJet%20P1006?serial=AC2A46G, normalized: laserjet p1006 
+serial ac2a46g
+Sep 11 08:40:34 laptop udev-configure-printer: Queue 
+ipp://localhost/printers/HP_LaserJet_P1006 has matching device URI
+
+
+Then I went into the HP Device manager and selected Print Test page and 
+got the following:
+
+Sep 11 08:43:29 laptop kernel: hpcups[4954]: segfault at 38 ip 0804f9bd 
+sp bf91c010 error 6 in hpcups[8048000+2b000]
+Sep 11 08:43:30 laptop hp[4955]: prnt/backend/hp.c 371: read new pjl 
+status: 10023
+Sep 11 08:43:30 laptop hp[4955]: prnt/backend/hp.c 371: read new pjl 
+status: 10001
+Sep 11 08:43:30 laptop hp[4955]: prnt/backend/hp.c 373: read pjl job_end: 0
+
+
+The contents of my /etc/cups/printers.conf
+
+# Printer configuration file for CUPS v1.4.6
+# Written by cupsd on 2011-09-08 20:28
+# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
+<Printer HP_LaserJet_P1006>
+Info
+Location
+MakeModel HP LaserJet p1006, hpcups 3.11.7, requires proprietary plugin
+DeviceURI hp:/usb/HP_LaserJet_P1006?serial=AC2A46G
+State Idle
+StateTime 1315528083
+Type 36876
+Filter application/vnd.cups-raw 0 -
+Filter application/vnd.cups-raster 0 hpcups
+Accepting Yes
+Shared Yes
+JobSheets none none
+QuotaPeriod 0
+PageLimit 0
+KLimit 0
+OpPolicy default
+ErrorPolicy stop-printer
+</Printer>
+
+And I have a PPD file called:
+
+-rw-r--r-- 1 root sys 14643 Sep  8 20:27 HP_LaserJet_P1006.ppd
+
+
+Doug
+
+
+
+
+-- 
+Ben Franklin quote:
+
+"Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety."
+
+
+ + + + + + + + + + + + + +
+

+ +
+More information about the Mageia-discuss +mailing list
+ -- cgit v1.2.1