From 1be510f9529cb082f802408b472a77d074b394c0 Mon Sep 17 00:00:00 2001 From: Nicolas Vigier Date: Sun, 14 Apr 2013 13:46:12 +0000 Subject: Add zarb MLs html archives --- .../20120830/97e573a8/attachment-0001.html | 49 ++++++++++++++++++++++ .../attachments/20120830/97e573a8/attachment.html | 49 ++++++++++++++++++++++ 2 files changed, 98 insertions(+) create mode 100644 zarb-ml/mageia-dev/attachments/20120830/97e573a8/attachment-0001.html create mode 100644 zarb-ml/mageia-dev/attachments/20120830/97e573a8/attachment.html (limited to 'zarb-ml/mageia-dev/attachments/20120830/97e573a8') diff --git a/zarb-ml/mageia-dev/attachments/20120830/97e573a8/attachment-0001.html b/zarb-ml/mageia-dev/attachments/20120830/97e573a8/attachment-0001.html new file mode 100644 index 000000000..4eb3cf617 --- /dev/null +++ b/zarb-ml/mageia-dev/attachments/20120830/97e573a8/attachment-0001.html @@ -0,0 +1,49 @@ + + + + + +
On 08/30/2012 08:01 AM, Frank Griffin + wrote:
+
+
On + 08/30/2012 07:45 AM, Remco Rijnders wrote: +
+
+
+ Courtesy of wobo, this is what we used last weekend: +
+
+ - Add "init 3" to the boot parameters, this should take you to + text only login. +
+
+ - Run XFDrake to see what driver you are using and possibly + adjust it if needed. +
+
+
+ That will work fine, if you're lucky enough to have a driver/card + that works in text mode without firmware.   Unfortunately, the + older ATI ones don't. +
+
+ FWIW my laptop has an ATI Radeon Mobility 4250 and I do a fresh + cauldron install about every other week.  I do have initial issues + with the Radeon upon first boot; however, I always just login to run + level 3, (I add "ro 3" not "init 3", but get the same result.)  add + the non-free repo then install the needed drivers, firmware and + fglrx kernel mod.  Reboot to RL3 again.  Run the display setup + program. Adjust settings accordingly, then reboot to RL5 and proceed + normally.
+
+ Regards
+
+
--
+

"A mind that is stretched by a new + experience can never go back to its old dimensions."

+
~Oliver Wendell Holmes, Jr.
+
+ + diff --git a/zarb-ml/mageia-dev/attachments/20120830/97e573a8/attachment.html b/zarb-ml/mageia-dev/attachments/20120830/97e573a8/attachment.html new file mode 100644 index 000000000..4eb3cf617 --- /dev/null +++ b/zarb-ml/mageia-dev/attachments/20120830/97e573a8/attachment.html @@ -0,0 +1,49 @@ + + + + + +
On 08/30/2012 08:01 AM, Frank Griffin + wrote:
+
+
On + 08/30/2012 07:45 AM, Remco Rijnders wrote: +
+
+
+ Courtesy of wobo, this is what we used last weekend: +
+
+ - Add "init 3" to the boot parameters, this should take you to + text only login. +
+
+ - Run XFDrake to see what driver you are using and possibly + adjust it if needed. +
+
+
+ That will work fine, if you're lucky enough to have a driver/card + that works in text mode without firmware.   Unfortunately, the + older ATI ones don't. +
+
+ FWIW my laptop has an ATI Radeon Mobility 4250 and I do a fresh + cauldron install about every other week.  I do have initial issues + with the Radeon upon first boot; however, I always just login to run + level 3, (I add "ro 3" not "init 3", but get the same result.)  add + the non-free repo then install the needed drivers, firmware and + fglrx kernel mod.  Reboot to RL3 again.  Run the display setup + program. Adjust settings accordingly, then reboot to RL5 and proceed + normally.
+
+ Regards
+
+
--
+

"A mind that is stretched by a new + experience can never go back to its old dimensions."

+
~Oliver Wendell Holmes, Jr.
+
+ + -- cgit v1.2.1