From 1be510f9529cb082f802408b472a77d074b394c0 Mon Sep 17 00:00:00 2001 From: Nicolas Vigier Date: Sun, 14 Apr 2013 13:46:12 +0000 Subject: Add zarb MLs html archives --- zarb-ml/mageia-dev/2012-December/020970.html | 106 +++++++++++++++++++++++++++ 1 file changed, 106 insertions(+) create mode 100644 zarb-ml/mageia-dev/2012-December/020970.html (limited to 'zarb-ml/mageia-dev/2012-December/020970.html') diff --git a/zarb-ml/mageia-dev/2012-December/020970.html b/zarb-ml/mageia-dev/2012-December/020970.html new file mode 100644 index 000000000..b1ed9c122 --- /dev/null +++ b/zarb-ml/mageia-dev/2012-December/020970.html @@ -0,0 +1,106 @@ + + + + [Mageia-dev] RFC: dropping prebuilt broadcom-wl drivers + + + + + + + + + +

[Mageia-dev] RFC: dropping prebuilt broadcom-wl drivers

+ Thomas Backlund + tmb at mageia.org +
+ Thu Dec 27 15:45:09 CET 2012 +

+
+ +
Wolfgang Bornath skrev 27.12.2012 16:29:
+> 2012/12/27 Thomas Backlund <tmb at mageia.org>:
+>> Wolfgang Bornath skrev 27.12.2012 16:04:
+>>>
+>>> 2012/12/27 Thomas Backlund <tmb at mageia.org>:
+>>
+>>
+>>>> can you provide either "lspcidrake -v" or "lspci -vnn" for that device
+>>>
+>>>
+>>> # lspcidrake -v |grep Broadcom
+>>> wl   : Broadcom Corporation | BCN4312 802.11b/g LP-PHY [NETWORK_OTHER]
+>>> (vendor:14e4 device:4315 subv:14e4 subd:04b5) (rev 1)
+>>>
+>>> That's it
+>>>
+>>
+>> Thanks. that shows the subvendor/device ids.
+>> The 4312 ones are problematic iirc...
+>>
+>> Now for some tests...
+>
+> In which mode do you want me to do that ?
+>   - live mode
+
+This wont work as you need to reboot to make sure the hw is in "good
+state" , wich will make the "uninstall part" useless.
+
+>   - installed without net access (through additional cable)
+>   - installed with net access (through additional cable) ?
+>
+
+you dont need cable access for the first part (1-4) but need
+cable access (or beta1 install dvd) for second part (5-8)
+
+after configuration step you obviously need to disconnect the
+cable  to verify that it works with wireless.
+
+And you dont need to do a new install to test this,
+a current installed/updated cauldron system should be enough.
+
+--
+Thomas
+
+
+ + + + + + + + + +
+

+ +
+More information about the Mageia-dev +mailing list
+ -- cgit v1.2.1