path: root/rpmdrake.spec

##################################################################
#
#
# !!!!!!!! WARNING => THIS HAS TO BE EDITED IN THE CVS !!!!!!!!!!!
#
#
##################################################################

%define name rpmdrake
%define version 2.1.1
%define release 2mdk

Name: %{name}
Version: %{version}
Release: %{release}
License: GPL
Source0: %name-%version.tar.bz2
Summary: Mandrake Linux graphical front end for choosing packages for installion/removal
Requires: perl-MDK-Common >= 1.0.4-13mdk urpmi >= 4.4.1 gurpmi >= 4.4.1 perl-URPM >= 0.90-7mdk drakxtools > 9.2-5mdk rpmtools >= 4.5
Requires: perl-Gtk2 >= 0.90-6mdk perl-Locale-gettext >= 1.01-7mdk
BuildRequires: curl-devel >= 7.10.3-2mdk gettext openssl-devel perl-devel
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-buildroot
Group: System/Configuration/Packaging
URL: http://cvs.mandrakesoft.com/cgi-bin/cvsweb.cgi/soft/rpmdrake/
Obsoletes: MandrakeUpdate
Conflicts: perl-URPM < 0.84

%description
rpmdrake is a simple graphical frontend to manage software packages on a
Mandrake Linux system; it has 3 different modes:
- software packages installation;
- software packages removal;
- Mandrake Update (software packages updates).

A fourth program manages the media (add, remove, edit).

%prep
rm -rf $RPM_BUILD_ROOT

%setup -q

%build
make OPTIMIZE="$RPM_OPT_FLAGS -Wall" PREFIX=%{_prefix} INSTALLDIRS=vendor

%install
make install PREFIX=$RPM_BUILD_ROOT/%{_prefix} BINDIR=$RPM_BUILD_ROOT/%{_bindir} SBINDIR=$RPM_BUILD_ROOT/%{_sbindir}
mkdir -p $RPM_BUILD_ROOT/%{perl_vendorlib}
install -m 644 rpmdrake.pm $RPM_BUILD_ROOT/%{perl_vendorlib}

%find_lang rpmdrake

mkdir -p $RPM_BUILD_ROOT%{_menudir}
cat > $RPM_BUILD_ROOT%{_menudir}/%{name} << EOF
?package(%{name}): command="/usr/sbin/rpmdrake" needs="x11" section="Configuration/Packaging" icon="rpmdrake.png" \
title="Browse Available Software" longtitle="A graphical front end for browsing available packages for installation (no root password needed)"
?package(%{name}): command="/usr/sbin/rpmdrake --root" needs="x11" section="Configuration/Packaging" icon="rpmdrake.png" \
title="Install Software" longtitle="A graphical front end for installing packages"
?package(%{name}): command="/usr/sbin/rpmdrake-remove --root" needs="x11" section="Configuration/Packaging" icon="rpmdrake-remove.png" \
title="Remove Software" longtitle="A graphical front end for removing packages"
?package(%{name}): command="/usr/sbin/MandrakeUpdate" needs="x11" section="Configuration/Packaging" icon="mandrakeupdate.png" \
title="Mandrake Update" longtitle="A graphical front end for software updates"
?package(%{name}): command="/usr/sbin/edit-urpm-media" needs="x11" section="Configuration/Packaging" icon="edit-urpm-sources.png" \
title="Software Media Manager" longtitle="A graphical front end to add/remove/edit media for installing packages"
EOF

mkdir -p $RPM_BUILD_ROOT{%{_miconsdir},%{_liconsdir}}
for i in rpmdrake rpmdrake-remove mandrakeupdate edit-urpm-sources; do
  cp pixmaps/${i}16.png $RPM_BUILD_ROOT%{_miconsdir}/${i}.png
  cp pixmaps/${i}32.png $RPM_BUILD_ROOT%{_iconsdir}/${i}.png
  cp pixmaps/${i}48.png $RPM_BUILD_ROOT%{_liconsdir}/${i}.png
done

# bloody RPM..
mkdir -p $RPM_BUILD_ROOT/var/lib/urpmi
touch $RPM_BUILD_ROOT/var/lib/urpmi/compssUsers.flat

%clean
rm -rf $RPM_BUILD_ROOT

%post 
%update_menus

%postun
%clean_menus

%files -f rpmdrake.lang
%defattr(-, root, root)
%doc COPYING AUTHORS
%{_sbindir}/rpmdrake*
%{_sbindir}/MandrakeUpdate
%{_sbindir}/edit-urpm-*
%{_bindir}/*
%{_datadir}/%{name}
%{perl_vendorlib}/*.pm
%{_menudir}/%{name}
%{_iconsdir}/*.png
%{_miconsdir}/*.png
%{_liconsdir}/*.png
%ghost /var/lib/urpmi/compssUsers.flat
%{perl_vendorarch}/auto/*
%{perl_vendorarch}/*.pm

%changelog
* Wed Jan 14 2004 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1.1-2mdk
- fix wrongly using unavailable sorting method in remove mode after
  save in install mode
- fix big performance penalty on long filelists since 2.1-36mdk
  allowing correct display of filenames in RTL languages (#6865)
 
* Mon Jan 12 2004 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1.1-1mdk
- add ability to cancel packages downloads (#6317)
- save sorting method at exit of rpmdrake for Lord Titi (#6051)
- together with changes in 2.1-36mdk deserve a subsubversion change
- remove unecessary provides perl(rpmdrake)

* Fri Jan 09 2004 Warly <warly@mandrakesoft.com> 2.1-37mdk
- add provides perl(rpmdrake)

* Tue Dec 23 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-36mdk
- provide drak* names as well
- fix filelist wrongly displayed in RTL language, thx titi (#6581)
- remove info on last selected package after install (#4648)
- MandrakeUpdate: add ability to select all (#6576 and others)

* Fri Sep  5 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-35mdk
- fix invalid-build-requires libcurl2-devel
- fix garbled UTF8 in "summary" and "description" of pkgs when i18n'ed
- use new urpmi API to verify signatures, so that we don't miss
  signatures problems when key of package is not in urpmi allowed pool
- fix "Reset the selection" that didn't really reset it for urpmi :/

* Tue Sep  2 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-34mdk
- s/9.1/9.2/ (#5201)
- help:
  - use --id
  - launch the good sub-chapter
  - add an help button to the Media Editor
- edit-urpm-media: fix not reporting any error when updating of
  media fail (#5212)

* Tue Sep 02 2003 David Baudens <baudens@mandrakesoft.com> 2.1-33mdk
- Update banners

* Mon Aug 18 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-32mdk
- edit-urpm-media:
  - handle modality in parallel and key editors
  - fix #4914 (program crashes when trying to add a medium)
- MandrakeUpdate: handle subdirectory in "updates" for special
  Mandrake issues such as corporate/clustering/etc
- rpmdrake: focus in the find entry on startup (#5021)

* Wed Aug 13 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-31mdk
- require root capability when run "Install Sofware" and add a new
  menu entry reading "Browse Available Software"
- s/Medias/Media/ in the program name of the menu entry
- fixes interactive_packtables dialogs initially much too small
  because titi replaced ->size_request by ->get_size_request
  (such dialog is for example "more information on packages")
- don't display a too high message when there are many packages
  with signatures problems (#4335)
- when updating media, if url is too long, don't display it because
  it enlarges much the dialog; better display only the basename
  and the medium name (#4338)
- edit-urpm-media/add:
  - right-align left labels
  - use a checkbutton for "hdlist" so that user better understands
    it's optional (and say in a tooltip that it is)
  - fix browsing for adding a security update (port gtk2-perl-xs
    not complete)
- edit-urpm-media: add ability to manage media keys

* Mon Aug  4 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-30mdk
- revert "use checkboxes instead of icons"

* Fri Jul 25 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 2.1-29mdk
- use checkboxes instead of icons
- fix mouse selection

* Wed Jul 23 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 2.1-28mdk
- fix #4248 (crash when asking for more infos in rpmdrake-remove)

* Tue Jul 22 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 2.1-27mdk
- let selected packages be visible

* Tue Jul 22 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 2.1-26mdk
- keep rpmdrake wait messages centered
- fix search

* Wed Jul 16 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 2.1-25mdk
- switch to gtk2-perl-xs

* Wed Jun 18 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-24mdk
- new ugtk2.pm API
- use urpmi reporting reasons for impossibility to select some
  packages, and for needing to remove some
- fix sorting of translated stuff in the treeview (will need
  drakxtools > 9.2-0.7mdk to work properly though)
- split translation of groups to ease i18n job
- fix some missing translations for compssUsers ("Mandrake Choices")
- scroll to the search results

* Fri Jun  6 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-23mdk
- rpmdrake: at install time, when some local files are impossible
  to find, list which one (asked by Gerard Delafond <gerard at
  delafond.org>)
- rpmdrake: new perl-URPM api

* Fri May 30 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-22mdk
- fix media/medias by medium/media
- edit-medias:
  - add ability to edit parallel urpmi
  - add ability to update a medium or regenerate its hdlist through
    right-click on the medium name

* Wed May 28 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-21mdk
- let medias be reorderable in the medias editor (drag and drop the list)
- add ability to list leaves (sorted by installation date) in remove mode
- add ability to run the rpmdrake suite as a user (you can browse
  packages but can't modify the system)
- edit-medias: remove weird looking Save&Quit / Quit buttons, use Ok only
- adding an update source: fix sorting according to tz
- let rpm groups be translatable (exhausts many invalid groups...)
- fix some distlint DIRM

* Fri May 16 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-20mdk
- perl-URPM API change: gives architecture in ask_remove
- fix "packages have bad signature dialog": really display a yes/no
  question! :)
- fix not removing gurpm dialog when exiting package installation with
  an error
- fix #3908 (garbage chars displayed as date in changelog entries in
  removal mode)
- substitute references to "sources" by now talking about "medias",
  should be more understandable and more consistent with urpmi

* Mon May 12 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-19mdk
- obsolete grpmi by gurpm.pm (from urpmi) sharing code between gurpmi
  and rpmdrake
- fix percent completed shown as "speed" in some situations, thx
  David Walser

* Thu Apr 17 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-18mdk
- fix problem shown by #3768: correctly handle case when there
  are already update source(s), but they are all disabled
- report more urpmi errors in the GUI

* Wed Apr 16 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-17mdk
- fix drakhelp zombie process (thx titi)
- More infos -> More info thx David Walser
- fix /me sux breaking the "sorry this package can't be selected"
  in -16mdk, when trying to select a package that conflicts with
  a previously selected
- add urpmi reasons when "sorry this package can't be selected"
- show download progress of update medias when starting
  MandrakeUpdate

* Tue Apr 15 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-16mdk
- update for urpmi-4.3 (skipped packages should be better handled
  now: they will appear in package selection and searches, but
  not in "Upgradable" under "sort by update availability", as one
  would expect)
- MandrakeUpdate: UI change to follow David Walser's suggestions and
  patches from #3610, e.g. don't use two paned windows anymore

* Tue Apr  8 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-15mdk
- rpmdrake: small UI change to follow #3610, e.g. in
  "maximum information" mode, have the source and currently installed
  version closer to the top
- grpmi: fix yet again an UTF8 problem (#3676)

* Wed Mar 26 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-14mdk
- grpmi/curl_download: fixes for MandrakeClub:
  - don't verify peer's certificate (-k option of commandline curl)
  - allow following locations (allow HTTP redirections)
  - don't check for hostname before sending authentication (allow HTTP
    redirection needing authentication to another host)
- grpmi/curl_download: add missing recent curl error codes

* Wed Mar 12 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-13mdk
- update share/icons from mcc new icons

* Tue Mar 11 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-12mdk
- new icons
- latest po's

* Wed Mar  5 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-11mdk
- rpmdrake: when installation fails because some files are missing,
  display any encountered urpmi error
- choose a mirror dialog: larger default size so that the
  scrollbars don't appear
- latest po's

* Mon Mar  3 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-10mdk
- grpmi: fix error reporting (of gpg, rpm, curl) broken in non english

* Fri Feb 28 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-9mdk
- add help support thx to drakhelp

* Fri Feb 28 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-8mdk
- finish using urpmi callbacks when updating sources

* Fri Feb 21 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-7mdk
- fix bug that prevented from having all the translations in
  the PO (#1233)
- rpmdrake:
  - fix locking of CD after installation (#1311)
- add download progress when updating distant sources (still needs
  improvement in messages, work in progress with urpmi)
- some code cleanup thx to titi & perl checker

* Thu Feb 13 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-6mdk
- grpmi: if there was an error during installation, propose to
  remove the cached/downloaded packages or not (partially follows
  a nice suggestion by Jeff Martin <jeffm at tampabay.rr.com>)

* Tue Feb 11 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-5mdk
- rpmdrake:
  - mark version as 9.1
  - fixes error "source not selected" (#966 and its army of duplicates)

* Thu Jan 23 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-4mdk
- edit-urpm-sources:
  - fix wrong display of medium as "enabled", after adding a medium
    that has problems and is hence automatically disabled (#995)
  - fix crashing when managing to call Remove or Edit with nothing
    selected (#970)
- add a dependency to a recent drakxtools to fix #1030
- fix problems of characters display in non-latin1 locales
- fix wait messages breakage when using perl-GTK2 >= 0.0.cvs.2003.01.27.1
- a sources editor fix thx to titi
- select the right program among console-helper and kdesu to become root,
  thx to titi

* Tue Jan 21 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-3mdk
- rpmdrake:
  - fix "update sources" dialog which didn't update the asked mediums
- edit-urpm-sources:
  - fix many errors originating from not being able to access toggle
    buttons and entries after the dialog is finished (empty source
    name, impossible to add mediums without hdlists, etc)

* Fri Jan 10 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-2mdk
- grpmi:
  - verify all signatures at the end of all downloads
  - allow to say "yes to all" to the signatures questions
  - allow to retry downloads
- rpmdrake:
  - don't reset selection list when no package was installed/removed
  - try to have a more sensible default size for the rpmnew dialog
  - fix "Can't call method set_sensitive on an undefined value"
    stopping the program after resolving a rpmnew
  - add the possibility to view more infos on each package, when
    presenting a list of deps
- br*tn*y release :)

* Wed Jan  8 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 2.1-1mdk
- gtk2 (possibly contains important breakages, use with care)
- other fixes:
  - report errors when removing packages errored out!
  - rpmdrake-remove: fix absence of packages that are alternatives to basesystem

* Mon Sep 16 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-27mdk
- fix not finding grpmi in sudo mode
- fix unclickable "not finding grpmi" dialog

* Thu Sep 12 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-26mdk
- fixes not parsing descriptions file when MU adds itself the
  security source
- fixes all packages are displayed when "normal" updates are
  selected, even "security" and "bugfix" packages

* Wed Sep 11 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-25mdk
- when installing packages, set urpm->{fatal} so that I can intercept
  when "cancel" is clicked for the change of CD's -> we no more exit
  the program anymore

* Tue Sep 10 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-24mdk
- when starting rpmdrake as user, usermode restes some env vars, thus
  the locale seen might be fr_FR when it was fr; thus, for the title
  images, we need to load also ^(..)_.+ when the first try fails

* Mon Sep  9 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-23mdk
- in removal mode, fix misleading presence of "update sources"; fix
  behaviour of "reset selection"

* Fri Sep  6 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-22mdk
- don't display passwords in clear text for Lord Beranger
- set /etc/urpmi/proxy.cfg as 0600 when saving it
- add --changelog-first commandline option to display changelog before
  filelist in the description window
- add --merge-all-rpmnew commandline option to ask for merging all
  .rpmnew/.rpmsave files of the system
- fix impossibility of install packages after user refuses one
  time to remove some packages to allow others to be upgraded

* Thu Sep  5 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-21mdk
- add "search in files" in rpmdrake-remove
- when grpmi detects conflicts, don't aask for force, but abort
- when groups are partially selected, clicking on the group means
  unselection, not selection (because some members of groups are
  not selectable)
- have an expert right-click menu on the left treeview, for:
  - reset selection
  - reload lists
  - update sources

* Wed Sep  4 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-20mdk
- maximum information also provides info about currently installed
  package(s)
- add option "--no-verify-rpm" to not verify packages signatures
- have an icon in the top banner, and also have nice looking pre
  rendered (png) i18n's titles for iso8859-15? compatible po's

* Tue Sep  3 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-19mdk
- fix should not report "everything installed successfully" when not
- colorize the .rpmnew/.rpmsave diff
- colorize a bit the package description textfield
- use a fake modality to prevent user from clicking on "install"
  button while current installation is not yet finished
- fix error message when in console mode or XFree not available
- consolehelper should startup faster (when rpmdrake isexecuted
  as user)

* Mon Sep  2 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-18mdk
- rpmdrake:
  - fix displaying of dependencies: sometimes, when some packages
    can't be selected, it didn't correctly display the
    dependencies
  - add symlinks in /usr/bin so that user has the binaries in his path
  - add a warning message when it seems the user will install too much

* Fri Aug 30 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-17mdk
- rpmdrake:
  - support proxies using /etc/urpmi/proxy.cfg
- edit-urpm-sources:
  - add a proxy configuration editor

* Fri Aug 30 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-16mdk
- when a small amount of .rpmnew, don't have a scrolledwindow; when a
  very large amount, don't create a window higher than the screen
- have the changelogs extracted from the hdlist header: quicker, and
  good for distant sources (thx houpla)

* Thu Aug 29 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-15mdk
- fix program exiting when in "maximum informations" in rpmdrake-remove
- fix english typo, "informations" with an "s" doesn't english
- when searching in "by selection" or "by update availability" modes,
  instead of limiting search results, categorize search results

* Thu Aug 29 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-14mdk
- meuh, forgot to upload the change in drakxtools necessary for -13mdk

* Wed Aug 28 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-13mdk
- rpmdrake: right-click on the descriptions of a package to get more
  informations (source name, filelist, changelog when available)

* Tue Aug 27 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-12mdk
- rpmdrake
  - fix displaying of .rpmnew dialog when no .rpmnew files
  - have a static list of files for which we ignore the .rpmnew's
  - support .rpmsave files as well

* Tue Aug 27 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-11mdk
- edit-urpm-sources
  - when editing a removable medium, warn we need the medium in
    drive
  - some questions were only presentend with an "Ok" button
- rpmdrake
  - after installing packages, the "size selected" was not reset to 0
  - import compssUsers translations from drakx, take them for mandrake
    choices tree form
  - provide a nice interface to choose to keep or remove .rpmnew files

* Tue Aug 27 2002 David BAUDENS <baudens@mandrakesoft.com> 2.0-10mdk
- Update icons

* Mon Aug 26 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-9mdk
- grpmi: don't display successful end message when installing packages
  so that we have back the old behaviour and it's better for programs
  requesting several packages installation in a row (standalone apps);
  the successful message is still here in rpmdrake, it's displayed
  by rpmdrake itself
- rpmdrake: when choosing between packages, add the ability to have
  information about each package choice (one button per package)

* Mon Aug 26 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-8mdk
- rpmdrake-remove: don't show basesystem packages so that it
  becomes possible to select whole categories in "Mandrake
  Choices" mode (Development/Development for example)
- rpmdrake-remove: API of urpm.pm has changed (fixes "/" not an ARRAY
  reference)

* Fri Aug 23 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-7mdk
- rpmdrake: when a choice has to be made involving locales,
  autochoose the package requiring the locales already installed
  on the machine, or the package requiring an already selected
  locale
- rpmdrake: when user does a multiple selection of packages to
  install, if some packages require a new locale to install and
  they look like i18n packages (eg they contain the same locale
  name in their name), don't select them; it should fix the
  selection of all the locales when user selects "KDE
  Workstation" or "Gnome Workstation"; of course, still possible
  to select these packages one by one
- in by_presence and by_selection modes, limit search results to
  upgradable packages and to selected packages

* Thu Aug 22 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-6mdk
- edit-urpm-sources: toggle the ignore flag only when the button
  press was really done in an existing col/row
- rpmdrake: definitively fix the compssUsers.flat missing problem
  by having a "default" file for fallbacking on it when the DrakX
  generated one is missing
- grpmi: add an rcfile and the "noclearcache" option so that
  /var/lib/urpmi/cache/rpms/ is not cleared after trying to install
  the packages
- rpmdrake: use the width of current font to set the maximum size
  of the packages column, rather than pure hardcoding
- rpmdrake.pm: since timezone::read doesn't give a hash anymore but
  a hashref I need to reflect that in my code (pixel sux)
- grpmi: don't forget to unlink the tmpfile even when the
  signature is not correct
- grpmi: use my_gtk::exit so that mouse cursor gets fixed when
  exiting
- rpmdrake: keep up the main window when installing/removing
  packages, "it looks more professional"
- rpmdrake: fix exiting program when an hdlist seems corrupted to
  packdrake
- rpmdrake: add "search in descriptions", have an optionmenu to
  select the search type, have a progressbar and a stop button
  because it can be take a long time
- rpmdrake: have it possible to cancel a selection when user is not
  happy of the dependencies of the selection
- rpmdrake: use some hackery in my_gtk and in rpmdrake to really
  have a [+] in front of parent categories even if they are not
  really populated
- MandrakeUpdate: when user cancels the initial choose of mirror,
  explain that she can selects a manual mirror from the sources
  manager
- (fcrozat) provide .desktop files to have rpmdrake stuff in
  Nautilus when rpmdrake package is installed
- MandrakeUpdate: don't only use "update_source" as an update
  source, but all the sources marked as update by urpmi (fixes
  not taking into account the update source defined during
  install, if any)

* Mon Aug  5 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-5mdk
- when searching in files, limit search results to listed
  packages or the program might crash
- when searching in files, do it case sensitive
- in MandrakeUpdate mode, display a nice explanation message when
  the list of updates is void, and also put "(none)" in the list
  instead of seeing nothing and wondering if something is broken
  or not
- don't quit when validation was not ok (e.g. when user doesn't
  like the "these packages need to be removed for others to be
  upgraded", don't quit)
- handle case when use entered ftp location with a leading ftp://
- edit-urpm-sources: don't strictly require that all the fields be
  filled since urpmi can make guesses or build the hdlist itself;
  in removable and local modes, give the probe_with_hdlist option
  when the hdlist field is void

* Mon Aug  5 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-4mdk
- grpmi: provide information about the number of current download and
  number of overall downloads, same with installation of packages
- have compssUsers.flat a ghost file, so that rpm doesn't remove it
  when upgrading from rpmdrake-1.5 series
- substitute popuping Menu to get more sort methods by OptionMenu in
  one of the Radio, it should be easier for users to find them here
- don't exit at the end of the action, but restart
- add "update..." button in edit-urpm-sources to update the desired
  media
- when a search didn't get any results, tell it
- add searching in files facility (decision is made upon the presence
  of a / in the search field)
- try harder to really honour ignored media when trying to guess
  in which medium is a package
- don't die when a header could not be extracted

* Fri Aug  2 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-3mdk
- fix mouse cursor problem by calling my_gtk::exit instead of perl's
- fix grpmi exiting on illegal division by zero when curl reports a
  download of zero size
- allow user to cancel on medium changes

* Fri Aug  2 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-2mdk
- workaround packdrake segfault when hdlist is not available for
  a source (by file testing if the hdlist is readable)

* Thu Aug  1 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 2.0-1mdk
- c'mon rpmdrake, strike back in Perl!