# translation of DrakX-sc.po to Sardu
# Copyright (C) 2005 Free Software Foundation, Inc.
# Antoni Pistis <antonio.pistis@virgilio.it>, 2005.
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX-sc\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2010-04-30 09:51+BRT\n"
"PO-Revision-Date: 2005-09-14 11:29+0100\n"
"Last-Translator: Antoni Pistis <antonio.pistis@virgilio.it>\n"
"Language-Team: Sardu\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.3\n"

#: ../src/msec/config.py:46
msgid "Modified system files"
msgstr ""

#: ../src/msec/config.py:47
msgid "No changes in system files"
msgstr ""

#: ../src/msec/config.py:60
msgid "Disabled"
msgstr ""

#: ../src/msec/config.py:211 ../src/msec/config.py:423
msgid "Unable to load configuration file %s: %s"
msgstr ""

#: ../src/msec/config.py:225 ../src/msec/config.py:334
#: ../src/msec/config.py:442
#, fuzzy
msgid "Bad config option: %s"
msgstr "Assètiu de su Sonu"

#: ../src/msec/config.py:260 ../src/msec/config.py:373
#: ../src/msec/config.py:468
msgid "Unable to save %s: %s"
msgstr ""

#: ../src/msec/config.py:319
msgid "loading exceptions file %s: %s"
msgstr ""

#: ../src/msec/config.py:320
#, fuzzy
msgid "No exceptions loaded"
msgstr "Sceras"

#: ../src/msec/help.py:14
msgid ""
"Allow local users to connect to X server. Accepted arguments: yes (all "
"connections are allowed), local (only local connection), no (no connection)."
msgstr ""

#: ../src/msec/help.py:16
msgid "Enable checking for files/directories writable by everybody."
msgstr ""

#: ../src/msec/help.py:18
msgid "Log syslog messages on console terminal 12."
msgstr ""

#: ../src/msec/help.py:20
msgid "Send mail reports even if no changes were detected."
msgstr ""

#: ../src/msec/help.py:22
msgid ""
"Defines the base security level, on top of which the current configuration "
"is based."
msgstr ""

#: ../src/msec/help.py:24
msgid "Accept broadcasted ICMP echo."
msgstr ""

#: ../src/msec/help.py:26
msgid ""
"Enable verification for changes in the installed RPM packages. This will "
"notify you when new packages are installed or removed."
msgstr ""

#: ../src/msec/help.py:28
msgid "Enable periodic permission checking for files specified in msec policy."
msgstr ""

#: ../src/msec/help.py:30
msgid "Ignore changes in process IDs when checking for open network ports."
msgstr ""

#: ../src/msec/help.py:32
msgid "Allow X server to accept connections from network on tcp port 6000."
msgstr ""

#: ../src/msec/help.py:34
msgid "Enable checking for known rootkits using chkrootkit."
msgstr ""

#: ../src/msec/help.py:36
msgid ""
"Enable msec to enforce file permissions to the values specified in the msec "
"security policy."
msgstr ""

#: ../src/msec/help.py:38
msgid ""
"Enable sectools checks. This check will run all sectool checks for a "
"security level configuration. The security level to be used during this test "
"is determined by the CHECK_SECTOOL_LEVELS variable."
msgstr ""

#: ../src/msec/help.py:40
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""

#: ../src/msec/help.py:42
msgid "Allow system reboot and shutdown to local users."
msgstr ""

#: ../src/msec/help.py:44
msgid "Enable checking for changes in firewall settings."
msgstr ""

#: ../src/msec/help.py:46
msgid "Enable checking for additions/removals of suid root files."
msgstr ""

#: ../src/msec/help.py:48
msgid "Enables logging of periodic checks to system log."
msgstr ""

#: ../src/msec/help.py:50
msgid ""
"Enable crontab and at for users. Put allowed users in /etc/cron.allow and /"
"etc/at.allow (see man at(1) and crontab(1))."
msgstr ""

#: ../src/msec/help.py:52
msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
msgstr ""

#: ../src/msec/help.py:54
msgid ""
"Enable password-related checks, such as empty passwords and strange super-"
"user accounts."
msgstr ""

#: ../src/msec/help.py:56
msgid ""
"Set the password history length to prevent password reuse. This is not "
"supported by pam_tcb."
msgstr ""

#: ../src/msec/help.py:58
msgid "Enable checksum verification for suid files."
msgstr ""

#: ../src/msec/help.py:60
msgid ""
"Use secure location for temporary files. If this parameter is set to 'yes', "
"user home directory will be used for temporary files. Otherwise, /tmp will "
"be used."
msgstr ""

#: ../src/msec/help.py:62
msgid "User email to receive security notifications."
msgstr ""

#: ../src/msec/help.py:64
msgid "Set the user umask."
msgstr ""

#: ../src/msec/help.py:66
msgid "Allow only users in wheel group to su to root."
msgstr ""

#: ../src/msec/help.py:68
msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))."
msgstr ""

#: ../src/msec/help.py:70
#, fuzzy
msgid "Allow autologin."
msgstr "Autologin"

#: ../src/msec/help.py:72
msgid "Enable checking for changes in system users."
msgstr ""

#: ../src/msec/help.py:74
msgid "Enable checking for unowned files."
msgstr ""

#: ../src/msec/help.py:76
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""

#: ../src/msec/help.py:78
msgid "Allow display managers (kdm and gdm) to display list of local users."
msgstr ""

#: ../src/msec/help.py:80
msgid "Enable name resolution spoofing protection."
msgstr ""

#: ../src/msec/help.py:82
msgid ""
"Enforce MSEC file directory permissions on system startup. If this parameter "
"is set to 'enforce', system permissions will be enforced automatically, "
"according to system security settings."
msgstr ""

#: ../src/msec/help.py:84
msgid "Include current directory into user PATH by default"
msgstr ""

#: ../src/msec/help.py:86
msgid ""
"Enable permission checking on users' files that should not be owned by "
"someone else, or writable."
msgstr ""

#: ../src/msec/help.py:88
msgid ""
"Creates the symlink /etc/security/msec/server to point to /etc/security/msec/"
"server.SERVER_LEVEL. The /etc/security/msec/server is used by chkconfig --"
"add to decide to add a service if it is present in the file during the "
"installation of packages. By default, two presets are provided: local (which "
"only enables local services) and remote (which also enables some remote "
"services considered safe). Note that the allowed services must be placed "
"manually into the server.SERVER_LEVEL files when necessary."
msgstr ""

#: ../src/msec/help.py:90
msgid ""
"Use password to authenticate users. Take EXTREME care when disabling "
"passwords, as it will leave the machine vulnerable."
msgstr ""

#: ../src/msec/help.py:92
msgid "Show security notifications in system tray using libnotify."
msgstr ""

#: ../src/msec/help.py:94
msgid ""
"Set umask option for mounting vfat and ntfs partitions. If umask is '-1', "
"default system umask is used."
msgstr ""

#: ../src/msec/help.py:96
msgid "Enable checking for open network ports."
msgstr ""

#: ../src/msec/help.py:98
msgid "Allow direct root login on terminal."
msgstr ""

#: ../src/msec/help.py:100
msgid "Run security checks when machine is running on battery power."
msgstr ""

#: ../src/msec/help.py:102
msgid "Enable checking for changes in system groups."
msgstr ""

#: ../src/msec/help.py:104
msgid ""
"Allow remote root login via sshd. If yes, login is allowed. If without-"
"password, only public-key authentication logins are allowed. See sshd_config"
"(5) man page for more information."
msgstr ""

#: ../src/msec/help.py:106
msgid "Enable logging of strange network packets."
msgstr ""

#: ../src/msec/help.py:108
msgid ""
"Define the default retention period for logs, in weeks. Some countries "
"require that the log files should be kept for 12 months, other do not have "
"such strict requirements. This variable defines the number of past log files "
"that should be kept by logrotate on the system."
msgstr ""

#: ../src/msec/help.py:110
msgid "Ask for root password when going to single user level (man sulogin(8))."
msgstr ""

#: ../src/msec/help.py:112
msgid "Enable IP spoofing protection."
msgstr ""

#: ../src/msec/help.py:114
msgid "Allow root access without password for the members of the wheel group."
msgstr ""

#: ../src/msec/help.py:116
msgid "Fix owner and group of unowned files to use nobody/nogroup."
msgstr ""

#: ../src/msec/help.py:118
msgid "Send security check results by email."
msgstr ""

#: ../src/msec/help.py:120
msgid ""
"Allow to export display when passing from the root account to the other "
"users. See pam_xauth(8) for more details."
msgstr ""

#: ../src/msec/help.py:122
msgid ""
"Defines the sectool level to use during the periodic security check. You may "
"use the sectool-gui application to select individual tests for each level. "
"If this variable is not defined, the default level defined in sectool "
"configuration will be used."
msgstr ""

#: ../src/msec/help.py:124
msgid "Enable daily security checks."
msgstr ""

#: ../src/msec/help.py:126
msgid "Accept ICMP echo."
msgstr ""

#: ../src/msec/help.py:128
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters, using length,ndigits,nupper format."
msgstr ""

#: ../src/msec/help.py:130
msgid ""
"Allow full access to network services controlled by tcp_wrapper (see hosts."
"deny(5)). If yes, all services are allowed. If local, only connections to "
"local services are authorized. If no, the services must be authorized "
"manually in /etc/hosts.allow (see hosts.allow(5))."
msgstr ""

#: ../src/msec/help.py:132
msgid ""
"Enable verification of integrity of installed RPM packages. This will notify "
"you if checksums of the installed files were changed, showing separate "
"results for binary and configuration files."
msgstr ""

#: ../src/msec/help.py:134
msgid ""
"Patterns to exclude from disk checks. This parameter is parsed as a regex "
"(7), so you may use complex expressions."
msgstr ""

#: ../src/msec/help.py:136
msgid ""
"Allow users in wheel group to use sudo. If this option is set to 'yes', the "
"users in wheel group are allowed to use sudo and run commands as root by "
"using their passwords. If this option to set to 'without-password', the "
"users can use sudo without being asked for their password. WARNING: using "
"sudo without any password makes your system very vulnerable, and you should "
"only use this setting if you know what you are doing!"
msgstr ""

#: ../src/msec/help.py:138
msgid "Set the root umask."
msgstr ""

#: ../src/msec/help.py:140
msgid "Perform hourly security check for changes in system configuration."
msgstr ""

#: ../src/msec/help.py:142
msgid "Enforce MSEC settings on system startup"
msgstr ""

#: ../src/msec/help.py:144
msgid "Enable periodic security check results to terminal."
msgstr ""

#: ../src/msec/help.py:146
msgid "Accept bogus IPv4 error messages."
msgstr ""

#: ../src/msec/help.py:148
msgid "Enable checking for additions/removals of sgid files."
msgstr ""

#: ../src/msec/help.py:150
msgid "Activate ethernet cards promiscuity check."
msgstr ""

#: ../src/msec/libmsec.py:266
msgid "%s modified so launched command: %s"
msgstr ""

#: ../src/msec/libmsec.py:275
msgid "%s modified so should have run command: %s"
msgstr ""

#: ../src/msec/libmsec.py:377 ../src/msec/libmsec.py:409
#, fuzzy
msgid "deleted %s"
msgstr "Burra"

#: ../src/msec/libmsec.py:395
#, fuzzy
msgid "touched file %s"
msgstr "Nisçunu file de aici"

#: ../src/msec/libmsec.py:415
#, fuzzy
msgid "made symbolic link from %s to %s"
msgstr "Mudai de ext2 a ext3"

#: ../src/msec/libmsec.py:418
msgid "moved file %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:468 ../src/msec/libmsec.py:484
msgid "set variable %s to %s in %s"
msgstr ""

#: ../src/msec/libmsec.py:686
msgid "Error loading plugin '%s' from %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:703
msgid "Invalid callback: %s"
msgstr ""

#: ../src/msec/libmsec.py:712
msgid "Plugin %s not found"
msgstr ""

#: ../src/msec/libmsec.py:719
msgid "Not supported function '%s' in '%s'"
msgstr ""

#: ../src/msec/libmsec.py:726 ../src/msec/libmsec.py:856
msgid "In check-only mode, nothing is written back to disk."
msgstr ""

#: ../src/msec/libmsec.py:753
msgid "Invalid parameter for %s: '%s'. Valid parameters: '%s'."
msgstr ""

#: ../src/msec/libmsec.py:786
#, fuzzy
msgid "user name %s not found"
msgstr "Nòmini umperadori tropu longu"

#: ../src/msec/libmsec.py:798
msgid "user name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:810
msgid "group name %s not found"
msgstr ""

#: ../src/msec/libmsec.py:822
msgid "group name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:832
msgid "Unable to check /proc/mounts. Assuming all file systems are local."
msgstr ""

#: ../src/msec/libmsec.py:871
#, fuzzy
msgid "Forcing ownership of %s to %s"
msgstr "Mudai de ext2 a ext3"

#: ../src/msec/libmsec.py:875
#, fuzzy
msgid "Error changing user on %s: %s"
msgstr "faddina de scàrrigu %s: %s"

#: ../src/msec/libmsec.py:877
msgid "Wrong owner of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:880
#, fuzzy
msgid "Enforcing group on %s to %s"
msgstr "Mudai de ext2 a ext3"

#: ../src/msec/libmsec.py:884
#, fuzzy
msgid "Error changing group on %s: %s"
msgstr "faddina de scàrrigu %s: %s"

#: ../src/msec/libmsec.py:886
msgid "Wrong group of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:891
msgid "Enforcing permissions on %s to %o"
msgstr ""

#: ../src/msec/libmsec.py:895
msgid "Error changing permissions on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:897
msgid "Wrong permissions of %s: should be %o"
msgstr ""

#: ../src/msec/libmsec.py:901
#, fuzzy
msgid "Enforcing acl on %s"
msgstr "Mudai de ext2 a ext3"

#: ../src/msec/libmsec.py:915
msgid "Unable to add filesystem-specific ACL %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:917
#, fuzzy
msgid "Error changing acl on %s: %s"
msgstr "faddina de scàrrigu %s: %s"

#: ../src/msec/libmsec.py:919
msgid "Wrong acl of %s"
msgstr ""

#: ../src/msec/libmsec.py:936
msgid "bad permissions for '%s': '%s'"
msgstr ""

#: ../src/msec/libmsec.py:961
msgid "Non local file: \"%s\". Nothing changed."
msgstr ""

#: ../src/msec/libmsec.py:1006
#, fuzzy
msgid "Checking paths: %s"
msgstr "Controllu %s"

#: ../src/msec/msec.py:87 ../src/msec/msecperms.py:96
msgid "Invalid security level '%s'."
msgstr ""

#: ../src/msec/msec.py:114 ../src/msec/msecperms.py:121
msgid "Msec: Mandriva Security Center (%s)\n"
msgstr ""

#: ../src/msec/msec.py:115 ../src/msec/msecperms.py:122
msgid "Error: This application must be executed by root!"
msgstr ""

#: ../src/msec/msec.py:116 ../src/msec/msecperms.py:123
msgid "Run with --help to get help."
msgstr ""

#: ../src/msec/msec.py:142
msgid "Level '%s' not found, aborting."
msgstr ""

#: ../src/msec/msec.py:144
#, fuzzy
msgid "Switching to '%s' level."
msgstr "Mudai de ext2 a ext3"

#: ../src/msec/msec.py:151
msgid "No custom file permissions for level '%s'."
msgstr ""

#: ../src/msec/msec.py:152
#, fuzzy
msgid "Saving file permissions to '%s' level."
msgstr "Mudai de ext2 a ext3"

#: ../src/msec/msec.py:192 ../src/msec/msecperms.py:166
msgid "Unable to save config!"
msgstr ""

#: ../src/msec/msec.py:194
msgid "Unable to save file system permissions!"
msgstr ""

#: ../src/msec/msecgui.py:55
msgid ""
"<big><b>Choose security level</b></big>\n"
"This application allows you to configure your system security. If you wish\n"
"to activate it, choose the appropriate security level: "
msgstr ""

#: ../src/msec/msecgui.py:61
msgid ""
"This profile configures a reasonably safe set of security features. It is "
"the suggested level for Desktop. If unsure which profile to use, use this "
"one."
msgstr ""

#: ../src/msec/msecgui.py:62
msgid ""
"This profile is focused on netbooks, laptops or low-end devices, which are "
"only accessed by local users and run on batteries."
msgstr ""

#: ../src/msec/msecgui.py:64
msgid ""
"This profile is configured to provide maximum security, even at the cost of "
"limiting the remote access to the system. This level is suggested for "
"security-concerned systems and servers. "
msgstr ""

#: ../src/msec/msecgui.py:66
msgid ""
"This profile is targeted on local network servers, which do not receive "
"accesses from unauthorized Internet users."
msgstr ""

#: ../src/msec/msecgui.py:68
msgid ""
"This profile is provided for servers which are intended to be accessed by "
"unauthorized Internet users."
msgstr ""

#: ../src/msec/msecgui.py:69
msgid ""
"This profile is intended for the users who do not rely on msec to change "
"system settings, and use it for periodic checks only. It configures all "
"periodic checks to run once a day."
msgstr ""

#: ../src/msec/msecgui.py:70
msgid ""
"This profile is similar to the 'audit_daily' profile, but it runs all checks "
"weekly."
msgstr ""

#: ../src/msec/msecgui.py:77
#, fuzzy
msgid "Custom security level."
msgstr "Siguresa"

#: ../src/msec/msecgui.py:80
msgid ""
"<big><b>System security options</b></big>\n"
"These options control the local security configuration, such as the login "
"restrictions,\n"
"password configurations, integration with other security tools, and default "
"file creation\n"
"permissions.  "
msgstr ""

#: ../src/msec/msecgui.py:85
msgid ""
"<big><b>Network security options</b></big>\n"
"These options define the network security against remote threats, "
"unauthorized accesses,\n"
"and breakin attempts.  "
msgstr ""

#: ../src/msec/msecgui.py:89
msgid ""
"<big><b>Periodic security checks</b></big>\n"
"These options configure the security checks that should be executed "
"periodically.  "
msgstr ""

#: ../src/msec/msecgui.py:92
msgid ""
"<big><b>Exceptions</b></big>\n"
"Here you can configure the allowed exceptions for msec periodic security\n"
"checks. For each supported test, you may add as many exceptions as you want\n"
"for each check. Note that each exception is parsed as a regexp."
msgstr ""

#: ../src/msec/msecgui.py:97
msgid ""
"<big><b>File permissions</b></big>\n"
"These options allow to fine-tune system permissions for important files and "
"directories.\n"
"The following permissions are checked periodically, and any change to the "
"owner, group,\n"
"or current permission is reported. The permissions can be enforced, "
"automatically\n"
"changing them to the specified values when a change is detected.  "
msgstr ""

#: ../src/msec/msecgui.py:103
#, fuzzy
msgid "Save and apply new configuration?"
msgstr "Abeta... Àprigu s'assètiu"

#: ../src/msec/msecgui.py:154
msgid "Unable to load configuration for level '%s'"
msgstr ""

#: ../src/msec/msecgui.py:160
msgid "Unable to load permissions for level '%s'"
msgstr ""

#: ../src/msec/msecgui.py:193
#, fuzzy
msgid "_File"
msgstr "Cili"

#: ../src/msec/msecgui.py:195
#, fuzzy
msgid "_Save configuration"
msgstr "Assètiu de su Sonu"

#: ../src/msec/msecgui.py:200
#, fuzzy
msgid "_Quit"
msgstr "Bessi"

#: ../src/msec/msecgui.py:202 ../src/msec/msecgui.py:204
#, fuzzy
msgid "_Help"
msgstr "Ajudu"

#: ../src/msec/msecgui.py:205
#, fuzzy
msgid "_About"
msgstr "Apitzus de"

#: ../src/msec/msecgui.py:232
msgid "MSEC: System Security and Audit"
msgstr ""

#: ../src/msec/msecgui.py:245
msgid "Overview"
msgstr ""

#: ../src/msec/msecgui.py:246
#, fuzzy
msgid "Security settings"
msgstr "Siguresa"

#: ../src/msec/msecgui.py:255
#, fuzzy
msgid "Basic security"
msgstr "Siguresa"

#: ../src/msec/msecgui.py:256
#, fuzzy
msgid "System security"
msgstr "Siguresa"

#: ../src/msec/msecgui.py:257
#, fuzzy
msgid "Network security"
msgstr "Profilu de arretza"

#: ../src/msec/msecgui.py:258 ../src/msec/msecgui.py:649
msgid "Periodic checks"
msgstr ""

#: ../src/msec/msecgui.py:259
#, fuzzy
msgid "Exceptions"
msgstr "Sceras"

#: ../src/msec/msecgui.py:260 ../src/msec/msecgui.py:1250
msgid "Permissions"
msgstr "Permissus"

#: ../src/msec/msecgui.py:300
msgid "MSEC option changes"
msgstr ""

#: ../src/msec/msecgui.py:300
#, fuzzy
msgid "option"
msgstr "Sceras"

#: ../src/msec/msecgui.py:301
msgid "System permissions changes"
msgstr ""

#: ../src/msec/msecgui.py:301
#, fuzzy
msgid "permission check"
msgstr "Permissus"

#: ../src/msec/msecgui.py:311
msgid "changed %s <b>%s</b> (%s -> %s)"
msgstr ""

#: ../src/msec/msecgui.py:316
msgid "added %s <b>%s</b> (%s)"
msgstr ""

#: ../src/msec/msecgui.py:321
msgid "removed %s <b>%s</b>"
msgstr ""

#: ../src/msec/msecgui.py:325
#, fuzzy
msgid "no changes"
msgstr "Nisçunu acomunu"

#: ../src/msec/msecgui.py:338 ../src/msec/msecgui.py:345
#, fuzzy
msgid "Saving changes.."
msgstr "Srèxinu is pakitus..."

#: ../src/msec/msecgui.py:341
msgid "Ignore and quit"
msgstr ""

#: ../src/msec/msecgui.py:379
msgid "<b>%s:</b> <i>%s</i>\n"
msgstr ""

#: ../src/msec/msecgui.py:386
msgid "<b>MSEC test run results:</b> <i>%s</i>"
msgstr ""

#: ../src/msec/msecgui.py:394
msgid "Details"
msgstr "A minudu"

#: ../src/msec/msecgui.py:400
msgid "MSEC messages (%s): %d"
msgstr ""

#: ../src/msec/msecgui.py:414
msgid "Details (%d changes).."
msgstr ""

#: ../src/msec/msecgui.py:467
msgid "No base msec level specified, using '%s'"
msgstr ""

#: ../src/msec/msecgui.py:470
msgid "Detected base msec level '%s'"
msgstr ""

#: ../src/msec/msecgui.py:498
#, fuzzy
msgid "Security Option"
msgstr "Siguresa"

#: ../src/msec/msecgui.py:508 ../src/msec/msecgui.py:846
msgid "Description"
msgstr "Descriidura"

#: ../src/msec/msecgui.py:513
#, fuzzy
msgid "Value"
msgstr "Palau"

#: ../src/msec/msecgui.py:523
msgid "Invalid option '%s'!"
msgstr ""

#: ../src/msec/msecgui.py:593
msgid "Firewall"
msgstr ""

#: ../src/msec/msecgui.py:600 ../src/msec/msecgui.py:642
msgid "Configure"
msgstr ""

#: ../src/msec/msecgui.py:608
msgid "Updates"
msgstr ""

#: ../src/msec/msecgui.py:614
msgid "Update now"
msgstr ""

#: ../src/msec/msecgui.py:621
#, fuzzy
msgid "Security"
msgstr "Siguresa"

#: ../src/msec/msecgui.py:624
msgid "Msec is disabled"
msgstr ""

#: ../src/msec/msecgui.py:627
msgid "Msec is enabled"
msgstr ""

#: ../src/msec/msecgui.py:628
#, fuzzy
msgid "Base security level: '%s'"
msgstr "Siguresa"

#: ../src/msec/msecgui.py:636
msgid "Custom settings: %d"
msgstr ""

#: ../src/msec/msecgui.py:657
msgid "Never"
msgstr ""

#: ../src/msec/msecgui.py:658
msgid "Check: %s. Last run: %s"
msgstr ""

#: ../src/msec/msecgui.py:663
msgid "Show results"
msgstr ""

#: ../src/msec/msecgui.py:669
msgid "Run now"
msgstr ""

#: ../src/msec/msecgui.py:690
msgid "Unable to read log file: %s"
msgstr ""

#: ../src/msec/msecgui.py:691
msgid "Periodic check results"
msgstr ""

#: ../src/msec/msecgui.py:723
msgid ""
"Do you want to run the <b>%s</b> periodic check? Please note that it could "
"take a considerable time to finish."
msgstr ""

#: ../src/msec/msecgui.py:731 ../src/msec/msecgui.py:739
msgid "Please wait, running checks..."
msgstr ""

#: ../src/msec/msecgui.py:742
msgid "Please wait, this might take a few minutes."
msgstr ""

#: ../src/msec/msecgui.py:771
msgid "Periodic check was executed successfully!"
msgstr ""

#: ../src/msec/msecgui.py:774
msgid "An error occurred while running periodic check."
msgstr ""

#: ../src/msec/msecgui.py:806
#, fuzzy
msgid "Enable MSEC tool"
msgstr "Abivu alluidura de CD?"

#: ../src/msec/msecgui.py:813
msgid "Select the base security level"
msgstr ""

#: ../src/msec/msecgui.py:836
msgid "Level name"
msgstr ""

#: ../src/msec/msecgui.py:892
msgid "Send security alerts by email to:"
msgstr ""

#: ../src/msec/msecgui.py:914
msgid "Display security alerts on desktop"
msgstr ""

#: ../src/msec/msecgui.py:1098
msgid "Enable periodic security checks"
msgstr ""

#: ../src/msec/msecgui.py:1160
#, fuzzy
msgid "Security check"
msgstr "Siguresa"

#: ../src/msec/msecgui.py:1166
#, fuzzy
msgid "Exception"
msgstr "Sceras"

#: ../src/msec/msecgui.py:1187 ../src/msec/msecgui.py:1314
#, fuzzy
msgid "Add a rule"
msgstr "Açungi umperadori"

#: ../src/msec/msecgui.py:1192 ../src/msec/msecgui.py:1319
msgid "Delete"
msgstr "Burra"

#: ../src/msec/msecgui.py:1232
msgid "Path"
msgstr "Mori"

#: ../src/msec/msecgui.py:1238
#, fuzzy
msgid "User"
msgstr "ID umperadori"

#: ../src/msec/msecgui.py:1244
#, fuzzy
msgid "Group"
msgstr "IP Grupu"

#: ../src/msec/msecgui.py:1258
msgid "Enforce"
msgstr ""

#: ../src/msec/msecgui.py:1266
msgid "Acl"
msgstr ""

#: ../src/msec/msecgui.py:1419
msgid "Editing exception"
msgstr ""

#: ../src/msec/msecgui.py:1424
msgid "Adding new exception"
msgstr ""

#: ../src/msec/msecgui.py:1431
msgid ""
"Editing exception. Please select the correspondent msec check and exception "
"value\n"
msgstr ""

#: ../src/msec/msecgui.py:1438
msgid "Check: "
msgstr ""

#: ../src/msec/msecgui.py:1453
msgid "Exception: "
msgstr ""

#: ../src/msec/msecgui.py:1489
msgid "Changing permissions for %s"
msgstr ""

#: ../src/msec/msecgui.py:1497
msgid "Adding new permission check"
msgstr ""

#: ../src/msec/msecgui.py:1509
msgid "Changing permissions on <b>%s</b>"
msgstr ""

#: ../src/msec/msecgui.py:1509
msgid "new file"
msgstr ""

#: ../src/msec/msecgui.py:1521
#, fuzzy
msgid "File: "
msgstr "/_File"

#: ../src/msec/msecgui.py:1530
msgid ""
"Please specify new file owner and permissions, or use 'current' to keep "
"current settings."
msgstr ""

#: ../src/msec/msecgui.py:1537
#, fuzzy
msgid "User: "
msgstr "ID umperadori"

#: ../src/msec/msecgui.py:1548
#, fuzzy
msgid "Group: "
msgstr "IP Grupu"

#: ../src/msec/msecgui.py:1559
#, fuzzy
msgid "Permissions: "
msgstr "Permissus"

#: ../src/msec/msecgui.py:1568
msgid ""
"To enforce additional ACL (Access Control List) on file, specify them in the "
"following format:\n"
"user1:acl,user2:acl\n"
"Refer to 'man setfacl' for details."
msgstr ""

#: ../src/msec/msecgui.py:1575
msgid "ACL: "
msgstr ""

#: ../src/msec/msecgui.py:1642
msgid "Select new value for %s"
msgstr ""

#: ../src/msec/msecgui.py:1651
msgid ""
"<i>%s</i>\n"
"\n"
"\tCurrent value:\t\t\t<i>%s</i>\n"
"\t%sDefault level value:\t<i>%s</i>%s\n"
msgstr ""

#: ../src/msec/msecgui.py:1661
#, fuzzy
msgid "New value:"
msgstr "Caledònia Noa"

#: ../src/msec/plugins/msec.py:149
msgid "Allowing unrestricted chkconfig for packages"
msgstr ""

#: ../src/msec/plugins/msec.py:154
msgid "Restricting chkconfig for packages according to \"%s\" profile"
msgstr ""

#: ../src/msec/plugins/msec.py:164
#, fuzzy
msgid "Setting root umask to %s"
msgstr "Mudai de ext2 a ext3"

#: ../src/msec/plugins/msec.py:174
#, fuzzy
msgid "Setting users umask to %s"
msgstr "Mudai de ext2 a ext3"

#: ../src/msec/plugins/msec.py:195
msgid "Allowing users to connect X server from everywhere"
msgstr ""

#: ../src/msec/plugins/msec.py:198
msgid "Allowing users to connect X server from localhost"
msgstr ""

#: ../src/msec/plugins/msec.py:201
msgid "Restricting X server connection to the console user"
msgstr ""

#: ../src/msec/plugins/msec.py:204
msgid "invalid allow_x_connections arg: %s"
msgstr ""

#: ../src/msec/plugins/msec.py:227
msgid "Allowing the X server to listen to tcp connections"
msgstr ""

#: ../src/msec/plugins/msec.py:238
msgid "Forbidding the X server to listen to tcp connection"
msgstr ""

#: ../src/msec/plugins/msec.py:254
msgid "Invalid shell timeout \"%s\""
msgstr ""

#: ../src/msec/plugins/msec.py:262
msgid "Setting shell timeout to %s"
msgstr ""

#: ../src/msec/plugins/msec.py:270
msgid "Invalid shell history size \"%s\""
msgstr ""

#: ../src/msec/plugins/msec.py:281
msgid "Setting shell history size to %s"
msgstr ""

#: ../src/msec/plugins/msec.py:285
msgid "Removing limit on shell history size"
msgstr ""

#: ../src/msec/plugins/msec.py:294
msgid "Invalid file system umask \"%s\""
msgstr ""

#: ../src/msec/plugins/msec.py:328
msgid "Allowing reboot and shutdown to the console user"
msgstr ""

#: ../src/msec/plugins/msec.py:335
msgid "Allowing SysRq key to the console user"
msgstr ""

#: ../src/msec/plugins/msec.py:338
msgid "Allowing Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:342
msgid "Allowing Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:345
msgid "Allowing Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/plugins/msec.py:349
msgid "Forbidding reboot and shutdown to the console user"
msgstr ""

#: ../src/msec/plugins/msec.py:357
msgid "Forbidding SysRq key to the console user"
msgstr ""

#: ../src/msec/plugins/msec.py:360
msgid "Forbidding Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:364
msgid "Forbidding Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:367
msgid "Forbidding Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/plugins/msec.py:381
msgid "Allowing list of users in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:385
msgid "Allowing list of users in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:390
msgid "Forbidding list of users in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:394
msgid "Forbidding list of users in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:405
#, fuzzy
msgid "Allowing autologin"
msgstr "Autologin"

#: ../src/msec/plugins/msec.py:408
#, fuzzy
msgid "Forbidding autologin"
msgstr "Autologin"

#: ../src/msec/plugins/msec.py:413
msgid "Activating password in boot loader"
msgstr ""

#: ../src/msec/plugins/msec.py:427
msgid "Removing password in boot loader"
msgstr ""

#: ../src/msec/plugins/msec.py:442
msgid "Enabling log on console"
msgstr ""

#: ../src/msec/plugins/msec.py:446
msgid "Disabling log on console"
msgstr ""

#: ../src/msec/plugins/msec.py:463
msgid "Authorizing all services"
msgstr ""

#: ../src/msec/plugins/msec.py:467
msgid "Disabling all services"
msgstr ""

#: ../src/msec/plugins/msec.py:471
#, fuzzy
msgid "Disabling non local services"
msgstr "Cumoni de scannidoras innoi"

#: ../src/msec/plugins/msec.py:483
msgid "Enabling sulogin in single user runlevel"
msgstr ""

#: ../src/msec/plugins/msec.py:487
msgid "Disabling sulogin in single user runlevel"
msgstr ""

#: ../src/msec/plugins/msec.py:498
#, fuzzy
msgid "Enabling msec periodic runs"
msgstr "Abivu pratzidura swap %s"

#: ../src/msec/plugins/msec.py:502
msgid "Disabling msec periodic runs"
msgstr ""

#: ../src/msec/plugins/msec.py:515
msgid "Enabling crontab and at"
msgstr ""

#: ../src/msec/plugins/msec.py:522
msgid "Disabling crontab and at"
msgstr ""

#: ../src/msec/plugins/msec.py:534
msgid "Allowing export display from root"
msgstr ""

#: ../src/msec/plugins/msec.py:538
msgid "Forbidding export display from root"
msgstr ""

#: ../src/msec/plugins/msec.py:564
#, fuzzy
msgid "Allowing direct root login"
msgstr "Autologin"

#: ../src/msec/plugins/msec.py:581
msgid "Forbidding direct root login"
msgstr ""

#: ../src/msec/plugins/msec.py:603
msgid "Using secure location for temporary files"
msgstr ""

#: ../src/msec/plugins/msec.py:605
msgid "Not using secure location for temporary files"
msgstr ""

#: ../src/msec/plugins/msec.py:625
msgid "Allowing including current directory in path"
msgstr ""

#: ../src/msec/plugins/msec.py:628
msgid "Not allowing including current directory in path"
msgstr ""

#: ../src/msec/plugins/network.py:134
#, fuzzy
msgid "Allowing remote root login"
msgstr "Autologin"

#: ../src/msec/plugins/network.py:138
msgid "Forbidding remote root login"
msgstr ""

#: ../src/msec/plugins/network.py:142
msgid "Allowing remote root login only by passphrase"
msgstr ""

#: ../src/msec/plugins/network.py:175
msgid "Enabling name resolution spoofing protection"
msgstr ""

#: ../src/msec/plugins/network.py:180
msgid "Disabling name resolution spoofing protection"
msgstr ""

#: ../src/msec/plugins/pam.py:68
msgid "Using password to authenticate users"
msgstr ""

#: ../src/msec/plugins/pam.py:72
msgid "Don't use password to authenticate users"
msgstr ""

#: ../src/msec/plugins/pam.py:83
msgid "Password history not supported with pam_tcb."
msgstr ""

#: ../src/msec/plugins/pam.py:91
msgid "Invalid maximum password history length: \"%s\""
msgstr ""

#: ../src/msec/plugins/pam.py:106
msgid "Setting password history to %d."
msgstr ""

#: ../src/msec/plugins/pam.py:112
msgid "Disabling password history"
msgstr ""

#: ../src/msec/plugins/pam.py:124
msgid ""
"Invalid password length \"%s\". Use \"length,ndigits,nupper\" as parameter"
msgstr ""

#: ../src/msec/plugins/pam.py:145
msgid "Setting minimum password length %d"
msgstr ""

#: ../src/msec/plugins/pam.py:169
msgid "Allowing su only from wheel group members"
msgstr ""

#: ../src/msec/plugins/pam.py:173
msgid "no wheel group"
msgstr ""

#: ../src/msec/plugins/pam.py:177
msgid ""
"Security configuration is defined to allow only members of the wheel group "
"to su to root, but this group is empty. Please add the allowed users into "
"the wheel group."
msgstr ""

#: ../src/msec/plugins/pam.py:185
msgid "Allowing su for all"
msgstr ""

#: ../src/msec/plugins/pam.py:204
msgid "Allowing transparent root access for wheel group members"
msgstr ""

#: ../src/msec/plugins/pam.py:211
msgid "Disabling transparent root access for wheel group members"
msgstr ""

#~ msgid "Standard"
#~ msgstr "Standard"

#, fuzzy
#~ msgid "Secure"
#~ msgstr "Siguresa"

#, fuzzy
#~ msgid "System administrator email address:"
#~ msgstr "Assètia sa password de s'aministradori (root)"

#, fuzzy
#~ msgid "_Cancel"
#~ msgstr "Annudda"

#, fuzzy
#~ msgid "_Save"
#~ msgstr "Sarva"

#, fuzzy
#~ msgid "Do you want to save changes before closing?"
#~ msgstr "Bolis sarvai is mudas de /etc/fstab"

#, fuzzy
#~ msgid "_Import configuration"
#~ msgstr "Assètiu de su Sonu"

#, fuzzy
#~ msgid "_Export configuration"
#~ msgstr "Assètiu de su Sonu"

#, fuzzy
#~ msgid "Save and apply current policy"
#~ msgstr "Abeta... Àprigu s'assètiu"

#, fuzzy
#~ msgid "Quit"
#~ msgstr "Bessi"