# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the msec package.
#
# Translators:
# Arno Fleming, 2006
# Dennis Holierhoek <dennis.hh@hotmail.com>, 2016
# dragnadh, 2016-2017
# dragnadh, 2020
# Frederik Himpe <fhimpe@telenet.be>, 2009
# Jeroen ten Berge <j.ten.berge@twinbit.nl>, 2002
# Marcel Pol <marcel@timelord.nl>, 2021
# Marja van Waes, 2021
# Marja van Waes <marja@mageia.org>, 2014
# Niels Gras <niels.gras@wanadoo.nl>, 2000
# Rodolfo_Jadon, 2014
# Peter Bosch <peter.bosch@hccnet.nl>, 2002
# Rob Teng <mandrake.tips@free.fr>, 2005,2008
msgid ""
msgstr ""
"Project-Id-Version: Mageia\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-06-15 22:29+0200\n"
"PO-Revision-Date: 2021-06-09 23:04+0000\n"
"Last-Translator: Marcel Pol <marcel@timelord.nl>\n"
"Language-Team: Dutch (http://www.transifex.com/MageiaLinux/mageia/language/"
"nl/)\n"
"Language: nl\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#: ../src/msec/msec.py:87 ../src/msec/msecperms.py:96
#, python-format
msgid "Invalid security level '%s'."
msgstr "Ongeldig beveiligingsniveau ‘%s’."

#: ../src/msec/msec.py:114 ../src/msec/msecperms.py:121
#, python-format
msgid "Msec: Mageia Security Center (%s)\n"
msgstr "Msec: Mageia Beveiligingscentrum (%s)\n"

#: ../src/msec/msec.py:115 ../src/msec/msecperms.py:122
msgid "Error: This application must be executed by root!"
msgstr "Fout: Deze toepassing moet als root worden uitgevoerd!"

#: ../src/msec/msec.py:116 ../src/msec/msecperms.py:123
msgid "Run with --help to get help."
msgstr "Start met --help om hulp te krijgen."

#: ../src/msec/msec.py:142
#, python-format
msgid "Level '%s' not found, aborting."
msgstr "Niveau ‘%s’ niet gevonden, voortijdig afgebroken."

#: ../src/msec/msec.py:144
#, python-format
msgid "Switching to '%s' level."
msgstr "Overgaan naar niveau ‘%s’."

#: ../src/msec/msec.py:151
#, python-format
msgid "No custom file permissions for level '%s'."
msgstr "Geen standaard bestandstoegangsrechten voor niveau '%s'."

#: ../src/msec/msec.py:152
#, python-format
msgid "Saving file permissions to '%s' level."
msgstr "Bestandstoegangsrechten worden aangepast aan niveau '%s'."

#: ../src/msec/msec.py:192 ../src/msec/msecperms.py:166
msgid "Unable to save config!"
msgstr "Configuratie opslaan is onmogelijk!"

#: ../src/msec/msec.py:194
msgid "Unable to save file system permissions!"
msgstr "Bestandssysteemrechten opslaan is onmogelijk"

#: ../src/msec/help.py:14
msgid ""
"Defines the base security level, on top of which the current configuration "
"is based."
msgstr ""
"Definieert het basisbeveiligingsniveau waarop de huidige configuratie is "
"gebaseerd."

#: ../src/msec/help.py:16
msgid ""
"Enable sectools checks. This check will run all sectool checks for a "
"security level configuration. The security level to be used during this test "
"is determined by the CHECK_SECTOOL_LEVELS variable."
msgstr ""
"Sta sectools-checks toe. Hierdoor zullen alle sectoolchecks volgens de "
"beveiligingsniveauconfiguratie gedaan worden. Het gebruikte "
"beveiligingsniveau wordt bepaald door de CHECK_SECTOOL_LEVELS variabele."

#: ../src/msec/help.py:18
msgid ""
"Defines the sectool level to use during the periodic security check. You may "
"use the sectool-gui application to select individual tests for each level. "
"If this variable is not defined, the default level defined in sectool "
"configuration will be used."
msgstr ""
"Bepaalt het sectoolniveau voor gebruik tijdens de periodieke beveiligings-"
"controle. U kunt de \"sectool-gui\"-toepassing gebruiken om individuele "
"tests te selecteren voor elk niveau. Als deze variabele niet gedefinieerd "
"is, wordt het ingestelde standaardsectoolconfiguratieniveau gebruikt."

#: ../src/msec/help.py:20
msgid "Accept bogus IPv4 error messages."
msgstr "IPv4-onzinfoutmeldingen accepteren."

#: ../src/msec/help.py:22
msgid "Accept broadcasted ICMP echo."
msgstr "Uitgezonden ICMP-echo accepteren."

#: ../src/msec/help.py:24
msgid "Accept ICMP echo."
msgstr "ICMP-echo accepteren."

#: ../src/msec/help.py:26
msgid ""
"Allow remote root login via sshd. If yes, login is allowed. If without-"
"password, only public-key authentication logins are allowed. See "
"sshd_config(5) man page for more information."
msgstr ""
"Op afstand aanmelden als root via sshd toelaten. Het aanmelden wordt "
"toegelaten wanneer \"ja\" is ingesteld. Indien \"without-password\" is "
"gekozen, wordt enkel aanmelden als root met publieke sleutels toegelaten. "
"Zie de sshd_config(5) handleiding voor meer informatie."

#: ../src/msec/help.py:28
msgid "Enable IP spoofing protection."
msgstr "Bescherming tegen vervalste IP's."

#: ../src/msec/help.py:30
msgid "Enable logging of strange network packets."
msgstr "In logboek bijhouden van vreemde netwerkpakketten."

#: ../src/msec/help.py:32
msgid "Enable periodic permission checking for files specified in msec policy."
msgstr ""
"Laat de rechten van de bestanden die in de msec-policy opgegeven zijn "
"regelmatig controleren"

#: ../src/msec/help.py:34
msgid ""
"Enable msec to enforce file permissions to the values specified in the msec "
"security policy."
msgstr ""
"Sta msec toe bestandsrechten te wijzigen in de waarden die in de msec-"
"beveiligingspolicy opgegeven zijn."

#: ../src/msec/help.py:36
msgid ""
"Patterns to exclude from disk checks. This parameter is parsed as a regex "
"(7), so you may use complex expressions."
msgstr ""
"Patronen om uit te sluiten van schijfcontroles. Deze parameter wordt ontleed "
"als een regex (7), dus u kunt complexe expressies gebruiken."

#: ../src/msec/help.py:38
msgid ""
"Enable permission checking on users' files that should not be owned by "
"someone else, or writable."
msgstr ""
"Nakijken van toegangsrechten op gebruikersbestanden die niemand anders als "
"eigenaar mogen hebben of schrijfbaar mogen zijn."

#: ../src/msec/help.py:40
msgid "Enable checking for additions/removals of suid root files."
msgstr "Toevoegingen/verdwijningen van suid root-bestanden controleren."

#: ../src/msec/help.py:42
msgid "Enable checksum verification for suid files."
msgstr "Controlegetalverificatie voor suid-bestanden inschakelen."

#: ../src/msec/help.py:44
msgid "Enable checking for additions/removals of sgid files."
msgstr "Nagaan van toegevoegde/verwijderde sgid-bestanden."

#: ../src/msec/help.py:46
msgid "Enable checking for files/directories writable by everybody."
msgstr "Controleren op bestanden/mappen die voor iedereen beschrijfbaar zijn."

#: ../src/msec/help.py:48
msgid "Enable checking for unowned files."
msgstr "Controleren op bestanden zonder eigenaar."

#: ../src/msec/help.py:50
msgid "Fix owner and group of unowned files to use nobody/nogroup."
msgstr ""
"Herstel eigenaar en groep van onteigende bestanden door nobody/nogroup te "
"gebruiken."

#: ../src/msec/help.py:52
msgid "Activate ethernet cards promiscuity check."
msgstr "Controleren op afluistermodus van ethernetkaarten."

#: ../src/msec/help.py:54
msgid "Enable checking for open network ports."
msgstr "Controleren op openstaande netwerkpoorten."

#: ../src/msec/help.py:56
msgid "Ignore changes in process IDs when checking for open network ports."
msgstr ""
"Negeer proces-ID-veranderingen bij het controleren op openstaande "
"netwerkpoorten."

#: ../src/msec/help.py:58
msgid "Enable checking for changes in firewall settings."
msgstr "Sta controleren op firewallinstellingsveranderingen toe."

#: ../src/msec/help.py:60
msgid ""
"Enable password-related checks, such as empty passwords and strange super-"
"user accounts."
msgstr ""
"Wachtwoordgerelateerde controles doen, zoals controle op lege wachtwoorden "
"en vreemde super-user accounts."

#: ../src/msec/help.py:62
msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))."
msgstr ""
"Controleren op leeg wachtwoord in /etc/shadow (zie man-pagina shadow(5))."

#: ../src/msec/help.py:64
msgid "Enable checking for known rootkits using chkrootkit."
msgstr "Zoeken naar rootkits met chkrootkit."

#: ../src/msec/help.py:66
msgid ""
"Enable verification for changes in the installed RPM packages. This will "
"notify you when new packages are installed or removed."
msgstr ""
"Sta het controleren op veranderingen in de geïnstalleerde RPM-pakketten toe. "
"Hierdoor zult u een bericht ontvangen als nieuwe pakketten worden "
"geïnstalleerd of verwijderd."

#: ../src/msec/help.py:68
msgid ""
"Enable verification of integrity of installed RPM packages. This will notify "
"you if checksums of the installed files were changed, showing separate "
"results for binary and configuration files."
msgstr ""
"Sta integriteitsverificatie van geïnstalleerde RPM-pakketten toe. Dit zal u, "
"apart voor binaries en voor configuratiebestanden, waarschuwen als de "
"checksums van geïnstalleerde bestanden werden veranderd."

#: ../src/msec/help.py:70
msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
msgstr ""
"Controleren op gevaarlijke opties in de bestanden .rhosts en .shosts van "
"gebruikers."

#: ../src/msec/help.py:72
msgid "Enable checking for changes in system users."
msgstr "Sta controleren op verandering in systeemgebruikers toe."

#: ../src/msec/help.py:74
msgid "Enable checking for changes in system groups."
msgstr "Sta controle op veranderingen in systeemgroepen toe."

#: ../src/msec/help.py:76
msgid "Enable periodic security check results to terminal."
msgstr ""
"Toestaan periodieke-beveiligingscontroleresultaten in terminal te tonen."

#: ../src/msec/help.py:78
msgid "Send security check results by email."
msgstr "Resultaten van beveiligingscontrole via e-mail versturen."

#: ../src/msec/help.py:80
msgid "User email to receive security notifications."
msgstr "E-mailadres waar beveiligingsmeldingen naartoe worden gestuurd."

#: ../src/msec/help.py:82
msgid "Send mail reports even if no changes were detected."
msgstr ""
"E-mailrapporten versturen zelfs als er geen wijzigingen werden gedetecteerd."

#: ../src/msec/help.py:84
msgid "Enables logging of periodic checks to system log."
msgstr "Periodieke controles loggen in het systeemlogboek."

#: ../src/msec/help.py:86
msgid "Show security notifications in system tray using libnotify."
msgstr "Beveiligingsmeldingen in het systeemvak tonen met libnotify."

#: ../src/msec/help.py:88
msgid "Enable daily security checks."
msgstr "Dagelijkse beveiligingscontroles uitvoeren."

#: ../src/msec/help.py:90
msgid "Run security checks when machine is running on battery power."
msgstr "Start beveiligingschecks als de machine op de accu draait."

#: ../src/msec/help.py:92
msgid "Set the user umask."
msgstr "Instellen van de umask voor gebruikers."

#: ../src/msec/help.py:94
msgid "Set the root umask."
msgstr "Instellen van de umask voor root."

#: ../src/msec/help.py:96
msgid "Include current directory into user PATH by default"
msgstr "Voeg de huidige map standaard toe aan het gebruiker-PATH"

#: ../src/msec/help.py:98
msgid ""
"Set umask option for mounting vfat and ntfs partitions. If umask is '-1', "
"default system umask is used."
msgstr ""
"De umask-optie voor het aankoppelen van VFAT- en NTFS-partities instellen. "
"Als de umask '-1' is, wordt de standaard systeem-umask gebruikt."

#: ../src/msec/help.py:100
msgid "Allow autologin."
msgstr "Automatisch aanmelden toestaan."

#: ../src/msec/help.py:102
msgid "Allow system reboot and shutdown to local users."
msgstr "Toestaan dat lokale gebruikers het systeem herstarten of afsluiten."

#: ../src/msec/help.py:104
msgid "Allow direct root login on terminal."
msgstr "Directe aanmelding van root op de terminal toestaan."

#: ../src/msec/help.py:106
msgid "Allow display managers (sddm and gdm) to display list of local users."
msgstr ""
"Grafische aanmeldbeheerders (sddm en gdm) toestaan om een lijst van "
"gebruikers weer te geven."

#: ../src/msec/help.py:108
msgid ""
"Allow local users to connect to X server. Accepted arguments: yes (all "
"connections are allowed), local (only local connection), no (no connection)."
msgstr ""
"Lokale gebruikers toelaten te verbinden met de X-server. Mogelijke waarden: "
"‘ja’ (alle verbindingen worden toegestaan), ‘local’ (enkel lokale "
"verbindingen), ‘no’ (geen verbindingen)."

#: ../src/msec/help.py:110
msgid ""
"Allow to export display when passing from the root account to the other "
"users. See pam_xauth(8) for more details."
msgstr ""
"Exporteren van de grafische omgeving toestaan wanneer van het root-account "
"naar andere gebruiker wordt overgeschakeld. Zie de man-pagina pam_xauth (8) "
"voor meer details."

#: ../src/msec/help.py:112
msgid "Allow X server to accept connections from network on tcp port 6000."
msgstr "De X-server netwerkconnecties laten accepteren via TCP poort 6000."

#: ../src/msec/help.py:114
msgid ""
"Allow full access to network services controlled by tcp_wrapper (see hosts."
"deny(5)). If yes, all services are allowed. If local, only connections to "
"local services are authorized. If no, the services must be authorized "
"manually in /etc/hosts.allow (see hosts.allow(5))."
msgstr ""
"Volledige toegang tot netwerkdiensten gecontrolleerd door tcp_wrapper "
"toestaan (zie hosts.deny(5)). Indien \"ja\", worden alle diensten toegeaan. "
"Indien \"lokaal\", worden enkel lokale verbindingen toegestaan. Indien \"nee"
"\", moeten de systeemdiensten handmatig toegevoegd worden aan /etc/hosts."
"allow (zie hosts.allow(5))."

#: ../src/msec/help.py:116
msgid ""
"Creates the symlink /etc/security/msec/server to point to /etc/security/msec/"
"server.SERVER_LEVEL. The /etc/security/msec/server is used by chkconfig --"
"add to decide to add a service if it is present in the file during the "
"installation of packages. By default, two presets are provided: local (which "
"only enables local services) and remote (which also enables some remote "
"services considered safe). Note that the allowed services must be placed "
"manually into the server.SERVER_LEVEL files when necessary."
msgstr ""
"Een symbolische verwijzing /etc/security/msec/server maken die verwijst "
"naar /etc/security/msec/server.SERVER_LEVEL. /etc/security/msec/server wordt "
"gebruikt door chkconfig --add om te beslissen of een systeemdienst "
"toegevoegd moet worden bij de installatie van een pakket wanneer deze "
"aanwezig is in het bestand. Er worden standaard twee instellingen voorzien: "
"lokaal (waarbij enkel lokale systeemdiensten worden geactiveerd) en op "
"afstand (waarbij ook enkele als veilig beschouwde systeemdiensten die ook "
"via netwerk beschikbaar zijn, worden geactiveerd). Merk op dat waar nodig de "
"toegelaten systeemdiensten handmatig in de server.SERVER_LEVEL bestanden "
"moeten geplaatst worden."

#: ../src/msec/help.py:118
msgid ""
"Enable crontab and at for users. Put allowed users in /etc/cron.allow and /"
"etc/at.allow (see man at(1) and crontab(1))."
msgstr ""
"crontab en at inschakelen voor gebruikers. Zet toegestane gebruikers in /etc/"
"cron.allow en /etc/at.allow (zie de man-pagina van at(1) en crontab(1))."

#: ../src/msec/help.py:120
msgid "Log journal messages on console terminal 12."
msgstr "Berichten uit het logboek bijhouden in console terminal 12."

#: ../src/msec/help.py:122
msgid "Perform hourly security check for changes in system configuration."
msgstr ""
"Elk uur een beveiligingscontrole op veranderingen in de systeemconfiguratie."

#: ../src/msec/help.py:124
msgid "Ask for root password when going to single user level (man sulogin(8))."
msgstr ""
"Root-wachtwoord vragen wanneer naar single user level wordt gegaan (zie man-"
"pagina sulogin(8))."

#: ../src/msec/help.py:126
msgid ""
"Use secure location for temporary files. If this parameter is set to 'yes', "
"user home directory will be used for temporary files. Otherwise, /tmp will "
"be used."
msgstr ""
"Gebruik een veilige locatie voor tijdelijke bestanden. Als hier 'ja' staat, "
"zullen tijdelijke bestanden in de homemap van de gebruiker opgeslagen worden "
"en bij 'nee' in /tmp."

#: ../src/msec/help.py:128
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""
"Grootte van opdrachtgeheugen van shell instellen. Een waarde van -1 betekent "
"ongelimiteerd."

#: ../src/msec/help.py:130
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""
"De maximale shell-wachttijd instellen. Een waarde van nul betekent geen "
"maximale wachttijd."

#: ../src/msec/help.py:132
msgid "Enforce MSEC settings on system startup"
msgstr "MSEC-instellingen afdwingen bij systeemopstart"

#: ../src/msec/help.py:134
msgid ""
"Enforce MSEC file directory permissions on system startup. If this parameter "
"is set to 'enforce', system permissions will be enforced automatically, "
"according to system security settings."
msgstr ""
"MSEC-toegangsrechten op mappen afdwingen bij het opstarten van het systeem. "
"Als deze optie is ingesteld op \"afdwingen\", zullen de toegangsrechten "
"automatisch worden afgedwongen volgens de beveiligingsinstellingen van het "
"systeem."

#: ../src/msec/help.py:136
msgid ""
"Define the default retention period for logs, in weeks. Some countries "
"require that the log files should be kept for 12 months, other do not have "
"such strict requirements. This variable defines the number of past log files "
"that should be kept by logrotate on the system."
msgstr ""
"Stel de standaard bewaarperiode voor logbestanden in, in weken. Sommige "
"landen eisen dat de logbestanden 12 maanden bewaard worden, andere hebben "
"niet zulke strenge eisen. Deze variable bepaalt het aantal oude logbestanden "
"dat door logrotate op het systeem bewaard wordt."

#: ../src/msec/help.py:138
msgid ""
"Allow users in wheel group to use sudo. If this option is set to 'yes', the "
"users in wheel group are allowed to use sudo and run commands as root by "
"using their passwords. If this option to set to 'without-password', the "
"users can use sudo without being asked for their password. WARNING: using "
"sudo without any password makes your system very vulnerable, and you should "
"only use this setting if you know what you are doing!"
msgstr ""
"Sta gebruikers in de wheelgroup toe sudo te gebruiken. Als deze optie op "
"'ja' gezet is, kunnen de gebruikers in de wheelgroep sudo gebruiken en als "
"root commando's starten na het invoeren van hun wachtwoord. Als de optie is "
"ingesteld als 'zonder-wachtwoord', dan kunnen de gebruikers sudo gebruiken "
"zonder wachtwoord in te voeren. WAARSCHUWING: sudo zonder wachtwoord "
"gebruiken maakt uw systeem erg kwetsbaar. U zou deze instelling alleen "
"moeten gebruiken als u weet wat u doet!"

#: ../src/msec/help.py:140
msgid "Allow only users in wheel group to su to root."
msgstr ""
"Enkel gebruikers die lid zijn van de groep wheel toelaten om root te worden."

#: ../src/msec/help.py:142
msgid "Allow root access without password for the members of the wheel group."
msgstr "Root-toegang zonder wachtwoord toelaten voor leden van de groep wheel."

#: ../src/msec/help.py:144
msgid ""
"Use password to authenticate users. Take EXTREME care when disabling "
"passwords, as it will leave the machine vulnerable."
msgstr ""
"Gebruik wachtwoorden voor gebruikersauthenticatie. Wees EXTREEM voorzichtig "
"wanneer u wachtwoorden uitschakelt, want dit maakt het systeem kwetsbaar."

#: ../src/msec/help.py:146
msgid ""
"Set the password history length to prevent password reuse. This is not "
"supported by pam_tcb."
msgstr ""
"De lengte van de wachtwoordgeschiedenis instellen om hergebruik van "
"wachtwoorden te voorkomen. Dit wordt niet ondersteund door pam_tcb."

#: ../src/msec/help.py:148
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters, using length,ndigits,nupper format."
msgstr ""
"Instellen van de minimumlengte van het wachtwoord en minimum aantal cijfers "
"en hoofdletters, volgens het formaat lengte,aantal-cijfers,aantal-"
"hoofdletters."

#: ../src/msec/msecgui.py:57
msgid ""
"<big><b>Choose security level</b></big>\n"
"This application allows you to configure your system security. If you wish\n"
"to activate it, choose the appropriate security level: "
msgstr ""
"<big><b>Kies het beveiligingsniveau</b></big>\n"
"Deze toepassing maakt het mogelijk om de systeembeveiliging te "
"configureren.\n"
"Als u dit wenst te activeren, kies dan het gepaste beveiligingsniveau: "

#: ../src/msec/msecgui.py:63
msgid ""
"This profile configures a reasonably safe set of security features. It is "
"the suggested level for Desktop. If unsure which profile to use, use this "
"one."
msgstr ""
"Dit profiel stelt een redelijk goede set beveiligingsopties in. Het is het "
"voorgestelde niveau voor een werkstation. Als u twijfelt welk profiel te "
"kiezen, gebruik dan dit profiel."

#: ../src/msec/msecgui.py:64
msgid ""
"This profile is focused on netbooks, laptops or low-end devices, which are "
"only accessed by local users and run on batteries."
msgstr ""
"Dit profiel is bedoeld voor netbooks, laptops of low-end apparaten, die "
"enkel lokaal gebruikt worden en op een accu draaien."

#: ../src/msec/msecgui.py:66
msgid ""
"This profile is configured to provide maximum security, even at the cost of "
"limiting the remote access to the system. This level is suggested for "
"security-concerned systems and servers. "
msgstr ""
"Dit profiel is geconfigureerd om maximale beveiliging te bieden. Het "
"bemoeilijkt zelfs toegang op afstand tot het systeem. Dit niveau wordt "
"aanbevolen voor systemen en servers die meer bescherming behoeven."

#: ../src/msec/msecgui.py:68
msgid ""
"This profile is targeted on local network servers, which do not receive "
"accesses from unauthorized Internet users."
msgstr ""
"Dit profiel is bedoeld voor lokale netwerkservers, die niet via internet "
"door onbevoegden benaderd worden."

#: ../src/msec/msecgui.py:70
msgid ""
"This profile is provided for servers which are intended to be accessed by "
"unauthorized Internet users."
msgstr ""
"Dit profiel is bedoeld voor servers die voor iedereen via internet "
"toegankelijk zijn."

#: ../src/msec/msecgui.py:71
msgid ""
"This profile is intended for the users who do not rely on msec to change "
"system settings, and use it for periodic checks only. It configures all "
"periodic checks to run once a day."
msgstr ""
"Dit profiel is bedoeld voor gebruikers die niet vertrouwen op msec om "
"systeeminstellingen te veranderen, en het enkel voor periodieke checks "
"gebruiken. Het laat alle periodieke checks eens per dag uitvoeren."

#: ../src/msec/msecgui.py:72
msgid ""
"This profile is similar to the 'audit_daily' profile, but it runs all checks "
"weekly."
msgstr ""
"Dit profiel lijkt op het 'audit_daily'-profiel, maar voert alle checks "
"wekelijks uit."

#: ../src/msec/msecgui.py:79
msgid "Custom security level."
msgstr "Aangepast beveiligingsniveau."

#: ../src/msec/msecgui.py:82
msgid ""
"<big><b>System security options</b></big>\n"
"These options control the local security configuration, such as the login "
"restrictions,\n"
"password configurations, integration with other security tools, and default "
"file creation\n"
"permissions.  "
msgstr ""
"<big><b>Systeembeveiligingsopties</b></big>\n"
"Deze opties controleren de lokale beveiligingsconfiguratie, zoals de "
"aanmeldbeperkingen,\n"
"wachtwoordconfiguratie, integratie met andere beveiligingshulpmidddelen en\n"
"standaardtoegangsrechten bij het aanmaken van bestanden.  "

#: ../src/msec/msecgui.py:87
msgid ""
"<big><b>Network security options</b></big>\n"
"These options define the network security against remote threats, "
"unauthorized accesses,\n"
"and breakin attempts.  "
msgstr ""
"<big><b>Netwerkbeveiligingsopties</b></big>\n"
"Deze opties bepalen de netwerkbeveiliging tegen bedreigingen van op afstand, "
"ongeoorloofde\n"
"toegang en pogingen tot inbraak.  "

#: ../src/msec/msecgui.py:91
msgid ""
"<big><b>Periodic security checks</b></big>\n"
"These options configure the security checks that should be executed "
"periodically.  "
msgstr ""
"<big><b>Periodieke beveiligingscontroles</b></big>\n"
"Deze opties configureren de beveiligingscontroles die regelmatig moeten "
"worden uitgevoerd."

#: ../src/msec/msecgui.py:94
msgid ""
"<big><b>Exceptions</b></big>\n"
"Here you can configure the allowed exceptions for msec periodic security\n"
"checks. For each supported test, you may add as many exceptions as you want\n"
"for each check. Note that each exception is parsed as a regexp."
msgstr ""
"<big><b>Uitzonderingen</b></big>\n"
"Hier kunt u de toegestane uitzonderingen voor periodieke msecbeveiligings-\n"
"checks instellen. Voor elke ondersteunde test mag u zoveel uitzonderingen\n"
"toevoegen als u wilt. Let wel: iedere uitzondering wordt als regexp ontleed."

#: ../src/msec/msecgui.py:99
msgid ""
"<big><b>File permissions</b></big>\n"
"These options allow to fine-tune system permissions for important files and "
"directories.\n"
"The following permissions are checked periodically, and any change to the "
"owner, group,\n"
"or current permission is reported. The permissions can be enforced, "
"automatically\n"
"changing them to the specified values when a change is detected.  "
msgstr ""
"<big><b>Bestandstoegangsrechten</b></big>\n"
"Deze opties maken het mogelijk om de toegangsrechten op belangrijke "
"bestanden en mappen\n"
"in te stellen. De volgende toegangsrechten worden regelmatig gecontroleerd "
"en elke\n"
"wijziging van eigenaar, groep of toegangsrechten worden gerapporteerd. De "
"toegangs-\n"
"rechten kunnen worden afgedwongen door ze naar vooraf gedefinieerde waardes "
"te\n"
"wijzigen wanneer een aanpassing wordt gedetecteerd."

#: ../src/msec/msecgui.py:105
msgid "Save and apply new configuration?"
msgstr "Nieuwe configuratie opslaan en toepassen?"

#: ../src/msec/msecgui.py:156
#, python-format
msgid "Unable to load configuration for level '%s'"
msgstr "Kan de instellingen voor niveau '%s' niet laden"

#: ../src/msec/msecgui.py:162
#, python-format
msgid "Unable to load permissions for level '%s'"
msgstr "Kan geen rechten laden voor niveau ‘%s’"

#: ../src/msec/msecgui.py:195
msgid "_File"
msgstr "_Bestand"

#: ../src/msec/msecgui.py:197
msgid "_Save configuration"
msgstr "Configuratie Op_slaan"

#: ../src/msec/msecgui.py:202
msgid "_Quit"
msgstr "_Afsluiten"

#: ../src/msec/msecgui.py:204 ../src/msec/msecgui.py:206
msgid "_Help"
msgstr "_Hulp"

#: ../src/msec/msecgui.py:207
msgid "_About"
msgstr "_Info"

#: ../src/msec/msecgui.py:235
msgid "MSEC: System Security and Audit"
msgstr "MSEC: Systeembeveiliging en audit"

#: ../src/msec/msecgui.py:248
msgid "Overview"
msgstr "Overzicht"

#: ../src/msec/msecgui.py:249
msgid "Security settings"
msgstr "Beveiligingsinstellingen"

#: ../src/msec/msecgui.py:258
msgid "Basic security"
msgstr "Basisbeveiliging"

#: ../src/msec/msecgui.py:259
msgid "System security"
msgstr "Systeembeveiliging"

#: ../src/msec/msecgui.py:260
msgid "Network security"
msgstr "Netwerkbeveiliging"

#: ../src/msec/msecgui.py:261 ../src/msec/msecgui.py:653
msgid "Periodic checks"
msgstr "Periodieke controles"

#: ../src/msec/msecgui.py:262
msgid "Exceptions"
msgstr "Uitzonderingen"

#: ../src/msec/msecgui.py:263 ../src/msec/msecgui.py:1255
msgid "Permissions"
msgstr "Toegangsrechten"

#: ../src/msec/msecgui.py:303
msgid "MSEC option changes"
msgstr "MSEC aanpassingen aan opties"

#: ../src/msec/msecgui.py:303
msgid "option"
msgstr "optie"

#: ../src/msec/msecgui.py:304
msgid "System permissions changes"
msgstr "Aanpassingen systeemtoegangsrechten"

#: ../src/msec/msecgui.py:304
msgid "permission check"
msgstr "controle toegangsrechten"

#: ../src/msec/msecgui.py:314
#, python-format
msgid "changed %s <b>%s</b> (%s -> %s)"
msgstr "%s aangepast <b>%s</b> (%s -> %s)"

#: ../src/msec/msecgui.py:319
#, python-format
msgid "added %s <b>%s</b> (%s)"
msgstr "%s toegevoegd <b>%s</b> (%s)"

#: ../src/msec/msecgui.py:324
#, python-format
msgid "removed %s <b>%s</b>"
msgstr "%s verwijderd <b>%s</b>"

#: ../src/msec/msecgui.py:328
msgid "no changes"
msgstr "geen veranderingen"

#: ../src/msec/msecgui.py:341 ../src/msec/msecgui.py:348
msgid "Saving changes.."
msgstr "Wijzigingen opslaan…"

#: ../src/msec/msecgui.py:344
msgid "Ignore and quit"
msgstr "Negeren en stoppen"

#: ../src/msec/msecgui.py:382
#, python-format
msgid "<b>%s:</b> <i>%s</i>\n"
msgstr "<b>%s:</b> <i>%s</i>\n"

#: ../src/msec/msecgui.py:389
#, python-format
msgid "<b>MSEC test run results:</b> <i>%s</i>"
msgstr "<b>Resultaten van MSEC testproces:</b> <i>%s</i>"

#: ../src/msec/msecgui.py:397
msgid "Details"
msgstr "Details"

#: ../src/msec/msecgui.py:403
#, python-format
msgid "MSEC messages (%s): %d"
msgstr "MSEC boodschappen (%s): %d"

#: ../src/msec/msecgui.py:417
#, python-format
msgid "Details (%d changes).."
msgstr "Details (%d aanpassingen)."

#: ../src/msec/msecgui.py:470
#, python-format
msgid "No base msec level specified, using '%s'"
msgstr "Geen msec-basisniveau gedefinieerd, ‘%s’ gebruiken"

#: ../src/msec/msecgui.py:473
#, python-format
msgid "Detected base msec level '%s'"
msgstr "Msec-basisniveau ‘%s’ gevonden"

#: ../src/msec/msecgui.py:501
msgid "Security Option"
msgstr "Beveiligingsoptie"

#: ../src/msec/msecgui.py:511 ../src/msec/msecgui.py:850
msgid "Description"
msgstr "Beschrijving"

#: ../src/msec/msecgui.py:517
msgid "Value"
msgstr "Waarde"

#: ../src/msec/msecgui.py:527
#, python-format
msgid "Invalid option '%s'!"
msgstr "Ongeldige optie \"%s\"!"

#: ../src/msec/msecgui.py:597
msgid "Firewall"
msgstr "Firewall"

#: ../src/msec/msecgui.py:604 ../src/msec/msecgui.py:646
msgid "Configure"
msgstr "Configureren"

#: ../src/msec/msecgui.py:612
msgid "Updates"
msgstr "Updates"

#: ../src/msec/msecgui.py:618
msgid "Update now"
msgstr "Nu bijwerken"

#: ../src/msec/msecgui.py:625
msgid "Security"
msgstr "Beveiliging"

#: ../src/msec/msecgui.py:628
msgid "Msec is disabled"
msgstr "Msec is uitgeschakeld"

#: ../src/msec/msecgui.py:631
msgid "Msec is enabled"
msgstr "Msec is ingeschakeld"

#: ../src/msec/msecgui.py:632
#, python-format
msgid "Base security level: '%s'"
msgstr "Basis beveiligingsniveau ‘%s’."

#: ../src/msec/msecgui.py:640
#, python-format
msgid "Custom settings: %d"
msgstr "Aangepaste instellingen: %d"

#: ../src/msec/msecgui.py:661
msgid "Never"
msgstr "Nooit"

#: ../src/msec/msecgui.py:662
#, python-format
msgid "Check: %s. Last run: %s"
msgstr "Check: %s. Voor het laatst uitgevoerd: %s"

#: ../src/msec/msecgui.py:667
msgid "Show results"
msgstr "Laat de resultaten zien"

#: ../src/msec/msecgui.py:673
msgid "Run now"
msgstr "Voer nu uit"

#: ../src/msec/msecgui.py:694
#, python-format
msgid "Unable to read log file: %s"
msgstr "Kan het logbestand niet lezen: %s"

#: ../src/msec/msecgui.py:695
msgid "Periodic check results"
msgstr "Periodieke-controleresultaten"

#: ../src/msec/msecgui.py:727
#, python-format
msgid ""
"Do you want to run the <b>%s</b> periodic check? Please note that it could "
"take a considerable time to finish."
msgstr ""
"Wilt u de <b>%s</b> periodieke controle uitvoeren? Let wel: het kan erg lang "
"duren voor de controle beëindigd is."

#: ../src/msec/msecgui.py:735 ../src/msec/msecgui.py:743
msgid "Please wait, running checks..."
msgstr "Wacht a.u.b, bezig controles uit te voeren..."

#: ../src/msec/msecgui.py:746
msgid "Please wait, this might take a few minutes."
msgstr "Wacht a.u.b, dit kan enige minuten duren."

#: ../src/msec/msecgui.py:775
msgid "Periodic check was executed successfully!"
msgstr "Periodieke controle werd met succes uitgevoerd!"

#: ../src/msec/msecgui.py:778
msgid "An error occurred while running periodic check."
msgstr "Een fout trad op tijdens de periodieke check."

#: ../src/msec/msecgui.py:810
msgid "Enable MSEC tool"
msgstr "MSEC inschakelen"

#: ../src/msec/msecgui.py:817
msgid "Select the base security level"
msgstr "Kies het basisbeveiligingsniveau"

#: ../src/msec/msecgui.py:840
msgid "Level name"
msgstr "Niveaunaam"

#: ../src/msec/msecgui.py:897
msgid "Send security alerts by email to:"
msgstr "Stuur beveiligingswaarschuwingen via e-mail naar:"

#: ../src/msec/msecgui.py:919
msgid "Display security alerts on desktop"
msgstr "Toon beveiligingswaarschuwingen op het bureaublad"

#: ../src/msec/msecgui.py:1103
msgid "Enable periodic security checks"
msgstr "Periodieke beveiligingscontroles inschakelen"

#: ../src/msec/msecgui.py:1165
msgid "Security check"
msgstr "Beveiligingscontrole"

#: ../src/msec/msecgui.py:1171
msgid "Exception"
msgstr "Uitzondering"

#: ../src/msec/msecgui.py:1192 ../src/msec/msecgui.py:1319
msgid "Add a rule"
msgstr "Voeg een regel toe"

#: ../src/msec/msecgui.py:1197 ../src/msec/msecgui.py:1324
msgid "Delete"
msgstr "Verwijderen"

#: ../src/msec/msecgui.py:1237
msgid "Path"
msgstr "Pad"

#: ../src/msec/msecgui.py:1243
msgid "User"
msgstr "Gebruiker"

#: ../src/msec/msecgui.py:1249
msgid "Group"
msgstr "Groep"

#: ../src/msec/msecgui.py:1263
msgid "Enforce"
msgstr "Afdwingen"

#: ../src/msec/msecgui.py:1271
msgid "Acl"
msgstr "Acl"

#: ../src/msec/msecgui.py:1424
msgid "Editing exception"
msgstr "Uitzondering bewerken"

#: ../src/msec/msecgui.py:1429
msgid "Adding new exception"
msgstr "Nieuwe uitzondering toevoegen"

#: ../src/msec/msecgui.py:1436
msgid ""
"Editing exception. Please select the correspondent msec check and exception "
"value\n"
msgstr ""
"Uitzondering bewerking. Kies a.u.b. de overeenkomstige msec-check en "
"uitzonderingswaarde\n"

#: ../src/msec/msecgui.py:1443
msgid "Check: "
msgstr "Check: "

#: ../src/msec/msecgui.py:1458
msgid "Exception: "
msgstr "Uitzondering: "

#: ../src/msec/msecgui.py:1494
#, python-format
msgid "Changing permissions for %s"
msgstr "Toegangsrechten voor %s aanpassen"

#: ../src/msec/msecgui.py:1502
msgid "Adding new permission check"
msgstr "Nieuwe toegangsrechtencontrole toevoegen"

#: ../src/msec/msecgui.py:1514
#, python-format
msgid "Changing permissions on <b>%s</b>"
msgstr "Toegangsrechten op <b>%s</b> aanpassen"

#: ../src/msec/msecgui.py:1514
msgid "new file"
msgstr "nieuw bestand"

#: ../src/msec/msecgui.py:1526
msgid "File: "
msgstr "Bestand:"

#: ../src/msec/msecgui.py:1535
msgid ""
"Please specify new file owner and permissions, or use 'current' to keep "
"current settings."
msgstr ""
"Definieer a.u.b. de nieuwe bestandseigenaar en toegangsrechten, of gebruik "
"'huidige' om de huidige instellingen te behouden."

#: ../src/msec/msecgui.py:1542
msgid "User: "
msgstr "Gebruiker:"

#: ../src/msec/msecgui.py:1553
msgid "Group: "
msgstr "Groep:"

#: ../src/msec/msecgui.py:1564
msgid "Permissions: "
msgstr "Toegangsrechten:"

#: ../src/msec/msecgui.py:1573
msgid ""
"To enforce additional ACL (Access Control List) on file, specify them in the "
"following format:\n"
"user1:acl,user2:acl\n"
"Refer to 'man setfacl' for details."
msgstr ""
"Om additionele ACL (Access Control List, \"Toegangscontrolelijst\") op het "
"bestand af te dwingen, specificeer deze in het volgende formaat:\n"
"gebruiker1:acl,gebruiker2:acl\n"
"Raadpleeg 'man setfacl' voor details."

#: ../src/msec/msecgui.py:1580
msgid "ACL: "
msgstr "ACL: "

#: ../src/msec/msecgui.py:1647
#, python-format
msgid "Select new value for %s"
msgstr "Nieuwe waarde voor %s selecteren"

#: ../src/msec/msecgui.py:1656
#, python-format
msgid ""
"<i>%s</i>\n"
"\n"
"\tCurrent value:\t\t\t<i>%s</i>\n"
"\t%sDefault level value:\t<i>%s</i>%s\n"
msgstr ""
"<i>%s</i>\n"
"\n"
"\tHuidige waarde:\t\t\t<i>%s</i>\n"
"\t%sStandaardniveau-waarde:\t<i>%s</i>%s\n"

#: ../src/msec/msecgui.py:1666
msgid "New value:"
msgstr "Nieuwe waarde:"

#: ../src/msec/libmsec.py:265
#, python-format
msgid "%s modified so launched command: %s"
msgstr "%s gewijzigd, dus opdracht gestart: %s"

#: ../src/msec/libmsec.py:274
#, python-format
msgid "%s modified so should have run command: %s"
msgstr "%s gewijzigd, dus opdracht zou moeten uitgevoerd zijn: %s"

#: ../src/msec/libmsec.py:376 ../src/msec/libmsec.py:408
#, python-format
msgid "deleted %s"
msgstr "%s verwijderd"

#: ../src/msec/libmsec.py:394
#, python-format
msgid "touched file %s"
msgstr "Tijd laatste wijziging bestand %s bijgewerkt"

#: ../src/msec/libmsec.py:414
#, python-format
msgid "made symbolic link from %s to %s"
msgstr "Symbolische verwijzing van %s naar %s aangemaakt"

#: ../src/msec/libmsec.py:417
#, python-format
msgid "moved file %s to %s"
msgstr "bestand %s naar %s verplaatst"

#: ../src/msec/libmsec.py:467 ../src/msec/libmsec.py:483
#, python-format
msgid "set variable %s to %s in %s"
msgstr "variabele %s ingesteld op %s in %s"

#: ../src/msec/libmsec.py:685
#, python-format
msgid "Error loading plugin '%s' from %s: %s"
msgstr "Fout bij het laden van plugin \"%s\" van %s: %s"

#: ../src/msec/libmsec.py:702
#, python-format
msgid "Invalid callback: %s"
msgstr "Foutieve aanroep: %s"

#: ../src/msec/libmsec.py:711
#, python-format
msgid "Plugin %s not found"
msgstr "Plugin %s niet gevonden"

#: ../src/msec/libmsec.py:718
#, python-format
msgid "Not supported function '%s' in '%s'"
msgstr "Niet-ondersteunde functie ‘%s’ in ‘%s’"

#: ../src/msec/libmsec.py:725 ../src/msec/libmsec.py:855
msgid "In check-only mode, nothing is written back to disk."
msgstr "Slechts in controlemodus, niets wordt weggeschreven naar de schijf."

#: ../src/msec/libmsec.py:752
#, python-format
msgid "Invalid parameter for %s: '%s'. Valid parameters: '%s'."
msgstr "Ongeldige parameter voor %s: ‘%s’. Geldige parameters: ‘%s’."

#: ../src/msec/libmsec.py:785
#, python-format
msgid "user name %s not found"
msgstr "gebruikersnaam %s niet gevonden"

#: ../src/msec/libmsec.py:797
#, python-format
msgid "user name not found for id %d"
msgstr "gebruikernaam voor id %d niet gevonden"

#: ../src/msec/libmsec.py:809
#, python-format
msgid "group name %s not found"
msgstr "Groepsnaam %s niet gevonden"

#: ../src/msec/libmsec.py:821
#, python-format
msgid "group name not found for id %d"
msgstr "groepsnaam voor id %d niet gevonden"

#: ../src/msec/libmsec.py:831
msgid "Unable to check /proc/mounts. Assuming all file systems are local."
msgstr ""
"Onmogelijk om /proc/mounts na te kijken. Veronderstellen dat alle "
"bestandssystemen lokaal zijn."

#: ../src/msec/libmsec.py:870
#, python-format
msgid "Forcing ownership of %s to %s"
msgstr "Eigenaar wijzigen van %s naar %s"

#: ../src/msec/libmsec.py:874
#, python-format
msgid "Error changing user on %s: %s"
msgstr "Fout bij wijzigen van gebruiker op %s: %s"

#: ../src/msec/libmsec.py:876
#, python-format
msgid "Wrong owner of %s: should be %s"
msgstr "Verkeerde eigenaar van %s: zou %s moeten zijn"

#: ../src/msec/libmsec.py:879
#, python-format
msgid "Enforcing group on %s to %s"
msgstr "Groep van %s aanpassen naar %s"

#: ../src/msec/libmsec.py:883
#, python-format
msgid "Error changing group on %s: %s"
msgstr "Fout bij het veranderen van groep van %s: %s"

#: ../src/msec/libmsec.py:885
#, python-format
msgid "Wrong group of %s: should be %s"
msgstr "Verkeerde groep van %s: zou  %s moeten zijn"

#: ../src/msec/libmsec.py:890
#, python-format
msgid "Enforcing permissions on %s to %o"
msgstr "Toegangsrechten van %s naar %o wijzigen"

#: ../src/msec/libmsec.py:894
#, python-format
msgid "Error changing permissions on %s: %s"
msgstr "Fout bij het wijzigen van de toegangsrechten op %s: %s"

#: ../src/msec/libmsec.py:896
#, python-format
msgid "Wrong permissions of %s: should be %o"
msgstr "Verkeerde toegangsrechten op %s: zou moeten %o zijn"

#: ../src/msec/libmsec.py:900
#, python-format
msgid "Enforcing acl on %s"
msgstr "ACL wijzigen van %s"

#: ../src/msec/libmsec.py:914
#, python-format
msgid "Unable to add filesystem-specific ACL %s to %s"
msgstr "Bestandssysteem-specifieke ACL %s tot %s toevoegen is onmogelijk"

#: ../src/msec/libmsec.py:916
#, python-format
msgid "Error changing acl on %s: %s"
msgstr "Fout bij wijzigen van ACL op %s: %s"

#: ../src/msec/libmsec.py:918
#, python-format
msgid "Wrong acl of %s"
msgstr "Onjuiste ACL van %s"

#: ../src/msec/libmsec.py:935
#, python-format
msgid "bad permissions for '%s': '%s'"
msgstr "Verkeerde toegangsrechten voor ‘%s’: ‘%s’"

#: ../src/msec/libmsec.py:960
#, python-format
msgid "Non local file: \"%s\". Nothing changed."
msgstr "Geen lokaal bestand: \"%s\". Niets gewijzigd."

#: ../src/msec/libmsec.py:1005
#, python-format
msgid "Checking paths: %s"
msgstr "Paden controleren: %s"

#: ../src/msec/tools.py:33
#, python-format
msgid "Unable to parse firewall configuration: %s"
msgstr "Het is onmogelijk de firewallinstellingen te ontleden: %s"

#: ../src/msec/tools.py:36 ../src/msec/config.py:60
msgid "Disabled"
msgstr "Uitgeschakeld"

#: ../src/msec/tools.py:38
#, python-format
msgid "Enabled, with %d rules"
msgstr "Ingeschakeld, met %d regels"

#: ../src/msec/tools.py:48
#, python-format
msgid "Last updated: %s"
msgstr "Voor het laatst bijgewerkt: %s"

#: ../src/msec/tools.py:50
#, python-format
msgid "Unable to access %s: %s"
msgstr "Kan geen toegang krijgen tot %s: %s"

#: ../src/msec/tools.py:51
msgid "Unable to determine update status"
msgstr "Kan de bijwerkstatus niet bepalen"

#: ../src/msec/config.py:46
msgid "Modified system files"
msgstr "Aangepaste systeembestanden"

#: ../src/msec/config.py:47
msgid "No changes in system files"
msgstr "Geen veranderingen in systeembestanden."

#: ../src/msec/config.py:222 ../src/msec/config.py:436
#, python-format
msgid "Unable to load configuration file %s: %s"
msgstr "Het configuratiebestand %s: %s kon niet geladen worden"

#: ../src/msec/config.py:236 ../src/msec/config.py:346
#: ../src/msec/config.py:455
#, python-format
msgid "Bad config option: %s"
msgstr "Onjuiste configuratie-optie: %s"

#: ../src/msec/config.py:271 ../src/msec/config.py:385
#: ../src/msec/config.py:481
#, python-format
msgid "Unable to save %s: %s"
msgstr "Niet in staat %s: %s op te slaan"

#: ../src/msec/config.py:331
#, python-format
msgid "loading exceptions file %s: %s"
msgstr "uitzonderingenbestand %s: %s laden"

#: ../src/msec/config.py:332
msgid "No exceptions loaded"
msgstr "Geen uitzonderingen geladen"

#: ../src/msec/plugins/audit.py:207
msgid "Activating periodic promiscuity check"
msgstr "Periodieke vermengingscontrole activeren"

#: ../src/msec/plugins/audit.py:211
msgid "Disabling periodic promiscuity check"
msgstr "Periodieke vermengingscontrole uitzetten"

#: ../src/msec/plugins/audit.py:224
msgid "Activating daily security check"
msgstr "Dagelijkse beveiligingscontrole activeren"

#: ../src/msec/plugins/audit.py:230
msgid "Disabling daily security check"
msgstr "Dagelijkse beveiligingscontrole uitzetten"

#: ../src/msec/plugins/pam.py:68
msgid "Using password to authenticate users"
msgstr "Wachtwoord gebruiken voor aanmeldcontrole van gebruikers"

#: ../src/msec/plugins/pam.py:72
msgid "Don't use password to authenticate users"
msgstr "Geen wachtwoord gebruiken voor aanmeldcontrole van gebruikers"

#: ../src/msec/plugins/pam.py:83
msgid "Password history not supported with pam_tcb."
msgstr "Wachtwoordgeschiedenis wordt niet ondersteund door pam_tcb."

#: ../src/msec/plugins/pam.py:91
#, python-format
msgid "Invalid maximum password history length: \"%s\""
msgstr "Ongeldige maximum lengte wachtwoordgeschiedenis: ‘%s’"

#: ../src/msec/plugins/pam.py:106
#, python-format
msgid "Setting password history to %d."
msgstr "Wachtwoordgeschiedenis instellen op %d."

#: ../src/msec/plugins/pam.py:112
msgid "Disabling password history"
msgstr "Wachtwoordgeschiedenis uitschakelen"

#: ../src/msec/plugins/pam.py:124
#, python-format
msgid ""
"Invalid password length \"%s\". Use \"length,ndigits,nupper\" as parameter"
msgstr ""
"Ongeldige wachtwoordlengte \"%s\". Gebruik \"aantal-karakters,aantal-cijfers,"
"aantal-hoofdletters\" als parameter"

#: ../src/msec/plugins/pam.py:145
#, python-format
msgid "Setting minimum password length %d"
msgstr "Minimum wachtwoordlengte %d instellen"

#: ../src/msec/plugins/pam.py:169
msgid "Allowing su only from wheel group members"
msgstr "su slechts toelaten voor leden van de wheelgroep"

#: ../src/msec/plugins/pam.py:173
msgid "no wheel group"
msgstr "geen wheelgroep"

#: ../src/msec/plugins/pam.py:177
msgid ""
"Security configuration is defined to allow only members of the wheel group "
"to su to root, but this group is empty. Please add the allowed users into "
"the wheel group."
msgstr ""
"De beveiligingsinstellingen staan alleen leden van de wheelgroep toe su te "
"gebruiken om root te worden, maar deze groep is leeg. Voeg a.u.b. de "
"betreffende gebruikers to aan de wheelgroep."

#: ../src/msec/plugins/pam.py:185
msgid "Allowing su for all"
msgstr "Su toestaan voor iedereen"

#: ../src/msec/plugins/pam.py:204
msgid "Allowing transparent root access for wheel group members"
msgstr "Transparante root-toegang toestaan voor leden van de groep wheel"

#: ../src/msec/plugins/pam.py:211
msgid "Disabling transparent root access for wheel group members"
msgstr "Transparante root-toegang uitschakelen voor leden van de groep wheel"

#: ../src/msec/plugins/network.py:131
msgid "Allowing remote root login"
msgstr "Op afstand aanmelden als root toestaan"

#: ../src/msec/plugins/network.py:135
msgid "Forbidding remote root login"
msgstr "Op afstand aanmelden als root verbieden"

#: ../src/msec/plugins/network.py:139
msgid "Allowing remote root login only by passphrase"
msgstr "Op afstand aanmelden als root enkel toestaan met publieke sleutel"

#: ../src/msec/plugins/msec.py:149
msgid "Allowing unrestricted chkconfig for packages"
msgstr "Onbeperkte chkconfig voor pakketten toestaan"

#: ../src/msec/plugins/msec.py:154
#, python-format
msgid "Restricting chkconfig for packages according to \"%s\" profile"
msgstr "Chkconfig beperken tot pakketten volgens ‘%s’-profiel"

#: ../src/msec/plugins/msec.py:164
#, python-format
msgid "Setting root umask to %s"
msgstr "Umask voor root wordt gewzijgd naar %s"

#: ../src/msec/plugins/msec.py:174
#, python-format
msgid "Setting users umask to %s"
msgstr "Umask voor gebruikers wordt gewijzigd naar %s"

#: ../src/msec/plugins/msec.py:195
msgid "Allowing users to connect X server from everywhere"
msgstr "Gebruikers van overal toestaan om te verbinden met de X-server"

#: ../src/msec/plugins/msec.py:198
msgid "Allowing users to connect X server from localhost"
msgstr "Gebruikers van localhost toestaan om te verbinden met de X-server"

#: ../src/msec/plugins/msec.py:201
msgid "Restricting X server connection to the console user"
msgstr "X-serververbindingen beperken tot de consolegebruiker"

#: ../src/msec/plugins/msec.py:204
#, python-format
msgid "invalid allow_x_connections arg: %s"
msgstr "ongeldig allow_x_connections argument: %s"

#: ../src/msec/plugins/msec.py:228
msgid "Allowing the X server to listen to tcp connections"
msgstr "De X-server toelaten om te luisteren naar TCP-verbindingen"

#: ../src/msec/plugins/msec.py:241
msgid "Forbidding the X server to listen to tcp connection"
msgstr "De X-server verbieden om te luisteren naar TCP-verbindingen"

#: ../src/msec/plugins/msec.py:257
#, python-format
msgid "Invalid shell timeout \"%s\""
msgstr "Ongeldige maximale shellwachttijd ‘%s’"

#: ../src/msec/plugins/msec.py:265
#, python-format
msgid "Setting shell timeout to %s"
msgstr "Maximale shellwachttijd wordt ingesteld op %s"

#: ../src/msec/plugins/msec.py:273
#, python-format
msgid "Invalid shell history size \"%s\""
msgstr "Ongeldige grootte shellgeschiedenis ‘%s’"

#: ../src/msec/plugins/msec.py:284
#, python-format
msgid "Setting shell history size to %s"
msgstr "Grootte van shellgeschiedenis wordt ingesteld op %s"

#: ../src/msec/plugins/msec.py:288
msgid "Removing limit on shell history size"
msgstr "Verwijderen limiet op de grootte van de shellgeschiedenis"

#: ../src/msec/plugins/msec.py:297
#, python-format
msgid "Invalid file system umask \"%s\""
msgstr "Ongeldige bestandssysteem-umask \"%s\""

#: ../src/msec/plugins/msec.py:331
msgid "Allowing reboot and shutdown to the console user"
msgstr "Herstarten en afsluiten door de consolegebruiker toestaan"

#: ../src/msec/plugins/msec.py:338
msgid "Allowing SysRq key to the console user"
msgstr "SysRq-toets toestaan aan de consolegebruiker."

#: ../src/msec/plugins/msec.py:341
msgid "Allowing Shutdown/Reboot in GDM"
msgstr "Afsluiten en herstarten van het systeem toelaten in GDM"

#: ../src/msec/plugins/msec.py:349
msgid "Allowing Ctrl-Alt-Del from console"
msgstr "Ctrl-Alt-Del vanop de console toestaan"

#: ../src/msec/plugins/msec.py:353
msgid "Forbidding reboot and shutdown to the console user"
msgstr "Herstarten en afsluiten verbieden aan de consolegebruiker"

#: ../src/msec/plugins/msec.py:361
msgid "Forbidding SysRq key to the console user"
msgstr "SysRq-toets verbieden aan de consolegebruiker"

#: ../src/msec/plugins/msec.py:364
msgid "Forbidding Shutdown/Reboot in GDM"
msgstr "Afsluiten en herstarten van het systeem verbieden in GDM"

#: ../src/msec/plugins/msec.py:372
msgid "Forbidding Ctrl-Alt-Del from console"
msgstr "Ctrl-Alt-Del van de console verbieden"

#: ../src/msec/plugins/msec.py:390 ../src/msec/plugins/msec.py:394
msgid "Allowing list of users in {}"
msgstr "Het toestaan van een gebruikerslijst in {}"

#: ../src/msec/plugins/msec.py:402
msgid "Forbidding list of users in {}"
msgstr "Het verbieden van een gebruikerslijst in {}"

#: ../src/msec/plugins/msec.py:406
msgid "Forbidding showing last user in {}"
msgstr "Verbied het tonen van de laatste gebruiker in {}"

#: ../src/msec/plugins/msec.py:417
msgid "Allowing autologin"
msgstr "Automatisch aanmelden toestaan"

#: ../src/msec/plugins/msec.py:420
msgid "Forbidding autologin"
msgstr "Automatisch aanmelden verbieden"

#: ../src/msec/plugins/msec.py:429
msgid "Enabling log on console"
msgstr "Systeemlogboekrapportage naar console inschakelen"

#: ../src/msec/plugins/msec.py:433
msgid "Disabling log on console"
msgstr "Systeemlogboekrapportage naar console uitschakelen"

#: ../src/msec/plugins/msec.py:451
msgid "Authorizing all services"
msgstr "Alle systeemdiensten toelaten"

#: ../src/msec/plugins/msec.py:455
msgid "Disabling all services"
msgstr "Alle systeemdiensten uitschakelen"

#: ../src/msec/plugins/msec.py:459
msgid "Disabling non local services"
msgstr "Uitschakelen van niet-lokale systeemdiensten"

#: ../src/msec/plugins/msec.py:471
msgid "Enabling sulogin in single user runlevel"
msgstr "sulogin inschakelen op \"single user\"-niveau"

#: ../src/msec/plugins/msec.py:475
msgid "Disabling sulogin in single user runlevel"
msgstr "sulogin uitschakelen op \"single user\"-niveau"

#: ../src/msec/plugins/msec.py:486
msgid "Enabling msec periodic runs"
msgstr "Activeren periodieke uitvoering van msec"

#: ../src/msec/plugins/msec.py:490
msgid "Disabling msec periodic runs"
msgstr "Periodieke controles van msec uitschakelen"

#: ../src/msec/plugins/msec.py:503
msgid "Enabling crontab and at"
msgstr "Crontab en at inschakelen"

#: ../src/msec/plugins/msec.py:510
msgid "Disabling crontab and at"
msgstr "crontab en at uitschakelen"

#: ../src/msec/plugins/msec.py:522
msgid "Allowing export display from root"
msgstr "Toestaan om de grafische omgeving van root te exporteren"

#: ../src/msec/plugins/msec.py:526
msgid "Forbidding export display from root"
msgstr "Verbieden om de grafische omgeving van root te exporteren"

#: ../src/msec/plugins/msec.py:553
msgid "Allowing direct root login"
msgstr "Directe aanmelding als root toestaan"

#: ../src/msec/plugins/msec.py:576
msgid "Forbidding direct root login"
msgstr "Directe aanmelding als root verbieden"

#: ../src/msec/plugins/msec.py:598
msgid "Using secure location for temporary files"
msgstr "Beveiligde locatie gebruiken voor tijdelijke bestanden"

#: ../src/msec/plugins/msec.py:600
msgid "Not using secure location for temporary files"
msgstr "Geen beveiligde locatie gebruiken voor tijdelijke bestanden"

#: ../src/msec/plugins/msec.py:620
msgid "Allowing including current directory in path"
msgstr "Toestaan huidige map in pad toe te voegen"

#: ../src/msec/plugins/msec.py:623
msgid "Not allowing including current directory in path"
msgstr "Niet toestaan huidige map in pad toe te voegen"

#: ../src/msec/plugins/sudo.py:49
msgid "Allowing users in wheel group to use sudo"
msgstr "Gebruikers in de wheelgroep toestaan sudo te gebruiken."

#: ../src/msec/plugins/sudo.py:54
msgid "Allowing users in wheel group to use sudo without password"
msgstr ""
"Gebruikers in de wheelgroep toestaan sudo te gebruiken zonder wachtwoord."

#: ../src/msec/plugins/sudo.py:57
msgid "Not allowing users in wheel group to use sudo"
msgstr "Gebruikers in de wheelgroep niet toestaan sudo te gebruiken."

#: ../src/msec/plugins/log.py:45
#, python-format
msgid "Invalid retention period: \"%s\""
msgstr "Ongeldige bewaartermijn: \"%s\""

#: ../src/msec/plugins/log.py:53
#, python-format
msgid "Setting log retention period to %d weeks"
msgstr "Logbewaartermijn installen op %d weken"

#: ../src/msec/man.py:234
msgid "NAME"
msgstr "NAAM"

#: ../src/msec/man.py:235
msgid "SYNOPSIS"
msgstr "SYNOPSIS"

#: ../src/msec/man.py:236
msgid "DESCRIPTION"
msgstr "OMSCHRIJVING"

#: ../src/msec/man.py:237
msgid "options"
msgstr "opties"

#: ../src/msec/man.py:238
msgid "Mageia Linux security tools"
msgstr ""

#: ../src/msec/man.py:239
msgid ""
"msec\n"
"is responsible to maintain system security in Mageia. It supports different "
"security\n"
"configurations, which can be organized into several security levels, stored "
"in\n"
"/etc/security/msec/level.LEVELNAME. Currently, three basic preconfigured "
"security levels are\n"
"provided with Mageia Linux:"
msgstr ""

#: ../src/msec/man.py:245
msgid ""
"this level disables all msec options. It should be used when you want to "
"manage\n"
"all aspects of system security on your own."
msgstr ""

#: ../src/msec/man.py:247
msgid ""
"this is the default security level, which configures a reasonably safe set "
"of security\n"
"features. It activates several periodic system checks, and sends the results "
"of their\n"
"execution by email (by default, the local 'root' account is used)."
msgstr ""

#: ../src/msec/man.py:255
msgid ""
"Besides those levels, different task-oriented security are also provided,\n"
"such as the 'fileserver', 'webserver' and 'netbook' levels. Such levels\n"
"attempt to pre-configure system security according to the most common use\n"
"cases."
msgstr ""

#: ../src/msec/man.py:259
msgid ""
"Note that besides those levels you may create as many levels as necessary."
msgstr ""

#: ../src/msec/man.py:260
msgid ""
"The security settings are stored in \\fB/etc/security/msec/security.conf"
"\\fR\n"
"file, and default settings for each predefined level are stored in\n"
"\\fB/etc/security/msec/level.LEVEL\\fR.  Permissions for files and "
"directories\n"
"that should be enforced or checked for changes are stored in\n"
"\\fB/etc/security/msec/perms.conf\\fR, and default permissions for each\n"
"predefined level are stored in \\fB/etc/security/msec/perm.LEVEL\\fR.  Note\n"
"that user-modified parameters take precedence over default level settings. "
"For\n"
"example, when default level configuration forbids direct root logins, this\n"
"setting can be overridden by the user."
msgstr ""

#: ../src/msec/man.py:269
msgid "The following options are supported by msec applications:"
msgstr ""

#: ../src/msec/man.py:271
msgid ""
"This is the console version of msec. It is responsible for system security "
"configuration\n"
"and checking and transitions between security levels.\n"
"\n"
"When executed without parameters, msec will read the system configuration "
"file\n"
"(/etc/security/msec/security.conf), and enforce the specified security\n"
"settings. The operations are logged to \\fB/var/log/msec.log\\fP file, and "
"also\n"
"to syslog, using \\fBLOG_AUTHPRIV\\fR facility.  Please note that msec "
"should\n"
"by run as root."
msgstr ""

#: ../src/msec/man.py:279 ../src/msec/man.py:298
msgid "This option will display the list of supported command line options."
msgstr ""

#: ../src/msec/man.py:280 ../src/msec/man.py:299
msgid "List the default configuration for given security level."
msgstr ""

#: ../src/msec/man.py:281
msgid ""
"Apply the specified security level to the system, overwriting all local\n"
"changes in /etc/security/msec/security.conf. This usually should be "
"performed\n"
"either on first install, or when a transition to a different level is "
"required."
msgstr ""

#: ../src/msec/man.py:284
msgid "Enable debugging messages."
msgstr ""

#: ../src/msec/man.py:285
msgid ""
"Verify the actions that will be performed by msec, without actually\n"
"doing anything to the system. In this mode of operation, msec performs all "
"the\n"
"required tasks, except effectively writting data back to disk."
msgstr ""

#: ../src/msec/man.py:288
msgid "Use path as root. Can be used to perform msec actions in chroot."
msgstr ""

#: ../src/msec/man.py:289
msgid "Run quietly"
msgstr "Stil uitvoeren."

#: ../src/msec/man.py:290
msgid "Save current settings as a new security level."
msgstr ""

#: ../src/msec/man.py:291
msgid ""
"This application is responsible for system permission checking and "
"enforcements.\n"
"\n"
"When executed without parameters, msecperms will read the permissions\n"
"configuration file (/etc/security/msec/perms.conf), and enforce the "
"specified\n"
"security settings. The operations are logged to \\fB/var/log/msec.log\\fP "
"file,\n"
"and also to syslog, using \\fBLOG_AUTHPRIV\\fR facility.  Please note that "
"msecperms\n"
"should by run as root."
msgstr ""

#: ../src/msec/man.py:300
msgid "Enforce the default permissions on all files."
msgstr ""

#: ../src/msec/man.py:301
msgid ""
"This is the GTK version of msec. It acts as frontend to all msec "
"functionalities."
msgstr ""

#: ../src/msec/man.py:302
msgid "EXAMPLES"
msgstr "VOORBEELDEN"

#: ../src/msec/man.py:303
msgid ""
"Enforce system configuration according to /etc/security/msec/security.conf "
"file:"
msgstr ""

#: ../src/msec/man.py:304
msgid "Display system configuration changes without enforcing anything:"
msgstr ""

#: ../src/msec/man.py:305
msgid "Install predefined security level 'standard':"
msgstr ""

#: ../src/msec/man.py:306 ../src/msec/man.py:313
msgid "Preview changes inflicted by change to 'standard' level:"
msgstr ""

#: ../src/msec/man.py:307
msgid "Create a custom security level based on 'standard':"
msgstr ""

#: ../src/msec/man.py:308 ../src/msec/man.py:315
msgid ""
"Export current security settings to create a new security level named "
"'office':"
msgstr ""

#: ../src/msec/man.py:309
msgid "DEFINING EXCEPTIONS FOR PERIODIC CHECKS"
msgstr ""

#: ../src/msec/man.py:310
msgid ""
"Enforce system permissions according to /etc/security/msec/perms.conf file:"
msgstr ""

#: ../src/msec/man.py:311
msgid "Display permissions changes without enforcing anything:"
msgstr ""

#: ../src/msec/man.py:312
msgid "Install predefined permissions for level 'standard':"
msgstr ""

#: ../src/msec/man.py:314
msgid "Create a custom permissions level based on 'secure':"
msgstr ""

#: ../src/msec/man.py:316
msgid ""
"msec\n"
"is capable of excluding certain patterns from periodic check reports. For\n"
"this, it is possible to define the exceptions in\n"
"\\fB/etc/security/msec/exceptions\\fP file, for each supported check."
msgstr ""

#: ../src/msec/man.py:320
msgid ""
"For example, to exclude all items that match \\fB/mnt\\fP, Mageia-based\n"
"chrooted installations in \\fB/chroot\\fP and all backup files from the\n"
"results of the check for unowned files on the system, it is sufficient to\n"
"define the following entry in the exceptions file:"
msgstr ""

#: ../src/msec/man.py:324
msgid ""
"In a similar way, it is possible to exclude the results for the \\fBdeluge"
"\\fP application from the list of open ports as follows:"
msgstr ""

#: ../src/msec/man.py:325
msgid ""
"Each exception entry is a regular exception, and you might define as many "
"exceptions as necessary."
msgstr ""

#: ../src/msec/man.py:326
msgid ""
"In order to exclude a path from all msec checks, you may use * for the check "
"name. For example, the following would exclude /media/ from all msec checks:"
msgstr ""

#: ../src/msec/man.py:327
msgid "See below for all msec options that support this feature."
msgstr "Kijk hieronder voor alle msec-opties die deze functie ondersteunen."

#: ../src/msec/man.py:328
msgid "SECURITY OPTIONS"
msgstr "BEVEILIGINGSOPTIES"

#: ../src/msec/man.py:329
msgid "The following security options are supported by msec:"
msgstr "De volgende beveiligingsopties worden ondersteund door msec:"

#: ../src/msec/man.py:340
msgid "NOTES"
msgstr "OPMERKINGEN"

#: ../src/msec/man.py:341
msgid "Msec applications must be run by root."
msgstr "Msec-programma's moeten gebruikt worden als root."

#: ../src/msec/man.py:342
msgid "AUTHORS"
msgstr "AUTEURS"

#: ../src/msec/man.py:381
msgid "MSEC parameter:"
msgstr "MSEC-parameter:"

#: ../src/msec/man.py:381
msgid "Accepted values:"
msgstr "Geaccepteerde waardes:"

#: ../src/msec/man.py:384
#, python-format
msgid ""
"(This check supports exceptions via %s variable defined in \\fB/etc/security/"
"msec/exceptions\\fP file)"
msgstr ""
"(Dit controleert de ondersteunde uitzonderingen via %s variabele die "
"ingesteld is in het \\fB/etc/security/msec/exceptions\\fP bestand)"

# File: ../cron-sh/security.sh, line: 15
#, sh-format
msgid "Error: base level $BASE_LEVEL not found"
msgstr "Fout: basisniveau $BASE_LEVEL niet gevonden"

# File: ../cron-sh/security.sh, line: 21
#, sh-format
msgid "/etc/security/msec/security.conf don't exist."
msgstr "/etc/security/msec/security.conf bestaat niet."

# File: ../cron-sh/security.sh, line: 92
#, sh-format
msgid "MSEC: audit script $script failed"
msgstr "MSEC: auditscript $script faalde"

# File: ../cron-sh/security.sh, line: 128
#, sh-format
msgid ""
"MSEC has performed Security Check on ${REPORT_HOSTNAME} on ${REPORT_DATE}. "
"Detailed results are available in ${MAIL_LOG_TODAY}"
msgstr ""
"MSEC heeft een Beveiligingscheck uitgevoerd op ${REPORT_HOSTNAME} op "
"${REPORT_DATE}. Gedetailleerde resultaten vindt u in ${MAIL_LOG_TODAY}"

# File: ../cron-sh/security.sh, line: 139
#, sh-format
msgid ""
"MSEC has performed Diff Check on ${REPORT_HOSTNAME} on ${REPORT_DATE}. "
"Changes in system security were detected and are available in "
"${SECURITY_LOG}."
msgstr ""
"MSEC heeft een Diffcheck uitgevoerd op ${REPORT_HOSTNAME} op ${REPORT_DATE}. "
"Systeembeveiligingsveranderingen werden ontdekt en kunt u vinden in "
"${SECURITY_LOG}."