# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"POT-Creation-Date: 2009-06-26 16:31+BRT\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: ENCODING\n"
"Generated-By: pygettext.py 1.5\n"


#: ../src/msec/help.py:14
msgid "Enable checking for firewall settings ports."
msgstr ""

#: ../src/msec/help.py:16
msgid "Enable IP spoofing protection."
msgstr ""

#: ../src/msec/help.py:18
msgid "Send mail reports even if no changes were detected."
msgstr ""

#: ../src/msec/help.py:20
msgid "Accept broadcasted ICMP echo."
msgstr ""

#: ../src/msec/help.py:22
msgid "Allow users to authenticate with their passwords for sudo. If this parameter is set to 'wheel', users must belong to the 'wheel' group to be able to use sudo"
msgstr ""

#: ../src/msec/help.py:24
msgid "Allow X server to accept connections from network on tcp port 6000."
msgstr ""

#: ../src/msec/help.py:26
msgid "Enable checking for known rootkits using chkrootkit."
msgstr ""

#: ../src/msec/help.py:28
msgid "Enable checking for additions/removals of suid root files."
msgstr ""

#: ../src/msec/help.py:30
msgid "Enable crontab and at for users. Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1) and crontab(1))."
msgstr ""

#: ../src/msec/help.py:32
msgid "Accept bogus IPv4 error messages."
msgstr ""

#: ../src/msec/help.py:34
msgid "Enable checksum verification for suid files."
msgstr ""

#: ../src/msec/help.py:36
msgid "User email to receive security notifications."
msgstr ""

#: ../src/msec/help.py:38
msgid "Allow autologin."
msgstr ""

#: ../src/msec/help.py:40
msgid "Allow only users in wheel group to su to root."
msgstr ""

#: ../src/msec/help.py:42
msgid "Creates the symlink /etc/security/msec/server to point to /etc/security/msec/server.SERVER_LEVEL. The /etc/security/msec/server is used by chkconfig --add to decide to add a service if it is present in the file during the installation of packages. By default, two presets are provided: local (which only enables local services) and remote (which also enables some remote services considered safe). Note that the allowed services must be placed manually into the server.SERVER_LEVEL files when necessary."
msgstr ""

#: ../src/msec/help.py:44
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""

#: ../src/msec/help.py:46
msgid "Enable permission checking on users' files that should not be owned by someone else, or writable."
msgstr ""

#: ../src/msec/help.py:48
msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))."
msgstr ""

#: ../src/msec/help.py:50
msgid "Use password to authenticate users. Take EXTREME care when disabling passwords, as it will leave the machine vulnerable."
msgstr ""

#: ../src/msec/help.py:52
msgid "Set umask option for mounting vfat and ntfs partitions. If umask is '-1', default system umask is used."
msgstr ""

#: ../src/msec/help.py:54
msgid "Enable checking for open network ports."
msgstr ""

#: ../src/msec/help.py:56
msgid "Enable logging of strange network packets."
msgstr ""

#: ../src/msec/help.py:58
msgid "Allow root access without password for the members of the wheel group."
msgstr ""

#: ../src/msec/help.py:60
msgid "Fix owner and group of unowned files to use nobody/nogroup."
msgstr ""

#: ../src/msec/help.py:62
msgid "Send security check results by email."
msgstr ""

#: ../src/msec/help.py:64
msgid "Set the password minimum length and minimum number of digit and minimum number of capitalized letters, using length,ndigits,nupper format."
msgstr ""

#: ../src/msec/help.py:66
msgid "Set the root umask."
msgstr ""

#: ../src/msec/help.py:68
msgid "Enable checking for additions/removals of sgid files."
msgstr ""

#: ../src/msec/help.py:70
msgid "Enable verification of integrity of installed RPM packages. This will notify you if checksums of the installed files were changed, showing separate results for binary and configuration files."
msgstr ""

#: ../src/msec/help.py:72
msgid "Enable AppArmor security framework on boot"
msgstr ""

#: ../src/msec/help.py:74
msgid "Allow local users to connect to X server. Accepted arguments: yes (all connections are allowed), local (only local connection), no (no connection)."
msgstr ""

#: ../src/msec/help.py:76
msgid "Enable checking for files/directories writable by everybody."
msgstr ""

#: ../src/msec/help.py:78
msgid "Log syslog messages on console terminal 12."
msgstr ""

#: ../src/msec/help.py:80
msgid "Enable name resolution spoofing protection."
msgstr ""

#: ../src/msec/help.py:82
msgid "Defines the base security level, on top of which the current configuration is based."
msgstr ""

#: ../src/msec/help.py:84
msgid "Enable periodic permission checking for system files."
msgstr ""

#: ../src/msec/help.py:86
msgid "Enable verification for changes in the installed RPM packages. This will notify you when new packages are installed or removed."
msgstr ""

#: ../src/msec/help.py:88
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""

#: ../src/msec/help.py:90
msgid "Allow system reboot and shutdown to local users."
msgstr ""

#: ../src/msec/help.py:92
msgid "Enables logging of periodic checks to system log."
msgstr ""

#: ../src/msec/help.py:94
msgid "Enable checking for changes in system groups."
msgstr ""

#: ../src/msec/help.py:96
msgid "Enable password-related checks, such as empty passwords and strange super-user accounts."
msgstr ""

#: ../src/msec/help.py:98
msgid "Set the password history length to prevent password reuse. This is not supported by pam_tcb."
msgstr ""

#: ../src/msec/help.py:100
msgid "Enable daily security checks."
msgstr ""

#: ../src/msec/help.py:102
msgid "Allow direct root login on terminal."
msgstr ""

#: ../src/msec/help.py:104
msgid "Enable checking for changes in system users."
msgstr ""

#: ../src/msec/help.py:106
msgid "Enable checking for unowned files."
msgstr ""

#: ../src/msec/help.py:108
msgid "Allow display managers (kdm and gdm) to display list of local users."
msgstr ""

#: ../src/msec/help.py:110
msgid "Enforce MSEC file directory permissions on system startup. If this parameter is set to 'enforce', system permissions will be enforced automatically, according to system security settings."
msgstr ""

#: ../src/msec/help.py:112
msgid "Show security notifications in system tray using libnotify."
msgstr ""

#: ../src/msec/help.py:114
msgid "Allow remote root login via sshd. If yes, login is allowed. If without-password, only public-key authentication logins are allowed. See sshd_config(5) man page for more information."
msgstr ""

#: ../src/msec/help.py:116
msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
msgstr ""

#: ../src/msec/help.py:118
msgid "Ask for root password when going to single user level (man sulogin(8))."
msgstr ""

#: ../src/msec/help.py:120
msgid "Allow to export display when passing from the root account to the other users. See pam_xauth(8) for more details."
msgstr ""

#: ../src/msec/help.py:122
msgid "Set the user umask."
msgstr ""

#: ../src/msec/help.py:124
msgid "Accept ICMP echo."
msgstr ""

#: ../src/msec/help.py:126
msgid "Allow full access to network services controlled by tcp_wrapper (see hosts.deny(5)). If yes, all services are allowed. If local, only connections to local services are authorized. If no, the services must be authorized manually in /etc/hosts.allow (see hosts.allow(5))."
msgstr ""

#: ../src/msec/help.py:128
msgid "Activate ethernet cards promiscuity check."
msgstr ""

#: ../src/msec/help.py:130
msgid "Perform hourly security check for changes in system configuration."
msgstr ""

#: ../src/msec/help.py:132
msgid "Enforce MSEC settings on system startup"
msgstr ""

#: ../src/msec/help.py:134
msgid "Enable periodic security check results to terminal."
msgstr ""

#: ../src/msec/help.py:136
msgid "Enable PolicyKit security framework for all users. If this option is not enabled, only users in wheel group may change advanced PolicyKit permissions and settings"
msgstr ""

#: ../src/msec/libmsec.py:338
msgid "%s modified so launched command: %s"
msgstr ""

#: ../src/msec/libmsec.py:347
msgid "%s modified so should have run command: %s"
msgstr ""

#: ../src/msec/libmsec.py:449 ../src/msec/libmsec.py:481
msgid "deleted %s"
msgstr ""

#: ../src/msec/libmsec.py:467
msgid "touched file %s"
msgstr ""

#: ../src/msec/libmsec.py:487
msgid "made symbolic link from %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:490
msgid "moved file %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:540 ../src/msec/libmsec.py:556
msgid "set variable %s to %s in %s"
msgstr ""

#: ../src/msec/libmsec.py:767
msgid "Error loading plugin '%s' from %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:781
msgid "Invalid callback: %s"
msgstr ""

#: ../src/msec/libmsec.py:790
msgid "Plugin %s not found"
msgstr ""

#: ../src/msec/libmsec.py:797
msgid "Not supported function '%s' in '%s'"
msgstr ""

#: ../src/msec/libmsec.py:804 ../src/msec/libmsec.py:1611
msgid "In check-only mode, nothing is written back to disk."
msgstr ""

#: ../src/msec/libmsec.py:821
msgid "'%s' is not available in this version"
msgstr ""

#: ../src/msec/libmsec.py:831
msgid "Invalid parameter for %s: '%s'. Valid parameters: '%s'."
msgstr ""

#: ../src/msec/libmsec.py:846
msgid "Allowing unrestricted chkconfig for packages"
msgstr ""

#: ../src/msec/libmsec.py:851
msgid "Restricting chkconfig for packages according to \"%s\" profile"
msgstr ""

#: ../src/msec/libmsec.py:861
msgid "Setting root umask to %s"
msgstr ""

#: ../src/msec/libmsec.py:871
msgid "Setting users umask to %s"
msgstr ""

#: ../src/msec/libmsec.py:892
msgid "Allowing users to connect X server from everywhere"
msgstr ""

#: ../src/msec/libmsec.py:895
msgid "Allowing users to connect X server from localhost"
msgstr ""

#: ../src/msec/libmsec.py:898
msgid "Restricting X server connection to the console user"
msgstr ""

#: ../src/msec/libmsec.py:901
msgid "invalid allow_x_connections arg: %s"
msgstr ""

#: ../src/msec/libmsec.py:924
msgid "Allowing the X server to listen to tcp connections"
msgstr ""

#: ../src/msec/libmsec.py:935
msgid "Forbidding the X server to listen to tcp connection"
msgstr ""

#: ../src/msec/libmsec.py:951
msgid "Invalid shell timeout \"%s\""
msgstr ""

#: ../src/msec/libmsec.py:959
msgid "Setting shell timeout to %s"
msgstr ""

#: ../src/msec/libmsec.py:967
msgid "Invalid shell history size \"%s\""
msgstr ""

#: ../src/msec/libmsec.py:978
msgid "Setting shell history size to %s"
msgstr ""

#: ../src/msec/libmsec.py:982
msgid "Removing limit on shell history size"
msgstr ""

#: ../src/msec/libmsec.py:991
msgid "Invalid file system umask \"%s\""
msgstr ""

#: ../src/msec/libmsec.py:1025
msgid "Allowing reboot and shutdown to the console user"
msgstr ""

#: ../src/msec/libmsec.py:1032
msgid "Allowing SysRq key to the console user"
msgstr ""

#: ../src/msec/libmsec.py:1035
msgid "Allowing Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/libmsec.py:1039
msgid "Allowing Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/libmsec.py:1042
msgid "Allowing Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/libmsec.py:1046
msgid "Forbidding reboot and shutdown to the console user"
msgstr ""

#: ../src/msec/libmsec.py:1054
msgid "Forbidding SysRq key to the console user"
msgstr ""

#: ../src/msec/libmsec.py:1057
msgid "Forbidding Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/libmsec.py:1061
msgid "Forbidding Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/libmsec.py:1064
msgid "Forbidding Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/libmsec.py:1078
msgid "Allowing list of users in KDM"
msgstr ""

#: ../src/msec/libmsec.py:1082
msgid "Allowing list of users in GDM"
msgstr ""

#: ../src/msec/libmsec.py:1087
msgid "Forbidding list of users in KDM"
msgstr ""

#: ../src/msec/libmsec.py:1091
msgid "Forbidding list of users in GDM"
msgstr ""

#: ../src/msec/libmsec.py:1105
msgid "Allowing remote root login"
msgstr ""

#: ../src/msec/libmsec.py:1109
msgid "Forbidding remote root login"
msgstr ""

#: ../src/msec/libmsec.py:1113
msgid "Allowing remote root login only by passphrase"
msgstr ""

#: ../src/msec/libmsec.py:1125
msgid "Allowing autologin"
msgstr ""

#: ../src/msec/libmsec.py:1128
msgid "Forbidding autologin"
msgstr ""

#: ../src/msec/libmsec.py:1133
msgid "Activating password in boot loader"
msgstr ""

#: ../src/msec/libmsec.py:1147
msgid "Removing password in boot loader"
msgstr ""

#: ../src/msec/libmsec.py:1162
msgid "Enabling log on console"
msgstr ""

#: ../src/msec/libmsec.py:1166
msgid "Disabling log on console"
msgstr ""

#: ../src/msec/libmsec.py:1178
msgid "Activating daily security check"
msgstr ""

#: ../src/msec/libmsec.py:1182
msgid "Disabling daily security check"
msgstr ""

#: ../src/msec/libmsec.py:1199
msgid "Authorizing all services"
msgstr ""

#: ../src/msec/libmsec.py:1203
msgid "Disabling all services"
msgstr ""

#: ../src/msec/libmsec.py:1207
msgid "Disabling non local services"
msgstr ""

#: ../src/msec/libmsec.py:1240
msgid "Enabling name resolution spoofing protection"
msgstr ""

#: ../src/msec/libmsec.py:1245
msgid "Disabling name resolution spoofing protection"
msgstr ""

#: ../src/msec/libmsec.py:1273
msgid "Enabling sulogin in single user runlevel"
msgstr ""

#: ../src/msec/libmsec.py:1277
msgid "Disabling sulogin in single user runlevel"
msgstr ""

#: ../src/msec/libmsec.py:1288
msgid "Enabling msec periodic runs"
msgstr ""

#: ../src/msec/libmsec.py:1292
msgid "Disabling msec periodic runs"
msgstr ""

#: ../src/msec/libmsec.py:1305
msgid "Enabling crontab and at"
msgstr ""

#: ../src/msec/libmsec.py:1312
msgid "Disabling crontab and at"
msgstr ""

#: ../src/msec/libmsec.py:1324
msgid "Allowing export display from root"
msgstr ""

#: ../src/msec/libmsec.py:1328
msgid "Forbidding export display from root"
msgstr ""

#: ../src/msec/libmsec.py:1339
msgid "Activating periodic promiscuity check"
msgstr ""

#: ../src/msec/libmsec.py:1343
msgid "Disabling periodic promiscuity check"
msgstr ""

#: ../src/msec/libmsec.py:1369
msgid "Allowing direct root login"
msgstr ""

#: ../src/msec/libmsec.py:1386
msgid "Forbidding direct root login"
msgstr ""

#: ../src/msec/libmsec.py:1541
msgid "user name %s not found"
msgstr ""

#: ../src/msec/libmsec.py:1553
msgid "user name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:1565
msgid "group name %s not found"
msgstr ""

#: ../src/msec/libmsec.py:1577
msgid "group name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:1587
msgid "Unable to check /proc/mounts. Assuming all file systems are local."
msgstr ""

#: ../src/msec/libmsec.py:1626
msgid "Forcing ownership of %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:1630
msgid "Error changing user on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:1632
msgid "Wrong owner of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:1635
msgid "Enforcing group on %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:1639
msgid "Error changing group on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:1641
msgid "Wrong group of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:1646
msgid "Enforcing permissions on %s to %o"
msgstr ""

#: ../src/msec/libmsec.py:1650
msgid "Error changing permissions on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:1652
msgid "Wrong permissions of %s: should be %o"
msgstr ""

#: ../src/msec/libmsec.py:1669
msgid "bad permissions for '%s': '%s'"
msgstr ""

#: ../src/msec/libmsec.py:1694
msgid "Non local file: \"%s\". Nothing changed."
msgstr ""

#: ../src/msec/libmsec.py:1736
msgid "Checking paths: %s"
msgstr ""

#: ../src/msec/msec.py:85 ../src/msec/msecperms.py:98
msgid "Invalid security level '%s'."
msgstr ""

#: ../src/msec/msec.py:108 ../src/msec/msecperms.py:127
msgid ""
"Msec: Mandriva Security Center (%s)\n"
msgstr ""

#: ../src/msec/msec.py:109 ../src/msec/msecperms.py:128
msgid "Error: This application must be executed by root!"
msgstr ""

#: ../src/msec/msec.py:110 ../src/msec/msecperms.py:129
msgid "Run with --help to get help."
msgstr ""

#: ../src/msec/msec.py:132 ../src/msec/msecperms.py:150
msgid "Level '%s' not found, aborting."
msgstr ""

#: ../src/msec/msec.py:134 ../src/msec/msecperms.py:152
msgid "Switching to '%s' level."
msgstr ""

#: ../src/msec/msec.py:150 ../src/msec/msecperms.py:169
msgid "Unable to save config!"
msgstr ""

#: ../src/msec/msecgui.py:50
msgid ""
"<big><b>Choose security level</b></big>\n"
"This application allows you to configure your system security. If you wish\n"
"to activate it, choose the appropriate security level: "
msgstr ""

#: ../src/msec/msecgui.py:54
msgid "This profile configures a reasonably safe set of security features. It activates several non-intrusive periodic system checks. This is the suggested level for Desktop."
msgstr ""

#: ../src/msec/msecgui.py:56
msgid "This profile is configured to provide maximum security, even at the cost of limiting the remote access to the system. It also runs a wider set of periodic checks. This level is suggested for Servers and security-concerned systems . "
msgstr ""

#: ../src/msec/msecgui.py:59
msgid ""
"<big><b>System security options</b></big>\n"
"These options control the local security configuration, such as the login restrictions,\n"
"password configurations, integration with other security tools, and default file creation\n"
"permissions.  "
msgstr ""

#: ../src/msec/msecgui.py:64
msgid ""
"<big><b>Network security options</b></big>\n"
"These options define the network security against remote threats, unauthorized accesses,\n"
"and breakin attempts.  "
msgstr ""

#: ../src/msec/msecgui.py:68
msgid ""
"<big><b>Periodic security checks</b></big>\n"
"These options configure the security checks that should be executed periodically.  "
msgstr ""

#: ../src/msec/msecgui.py:71
msgid ""
"<big><b>File permissions</b></big>\n"
"These options allow to fine-tune system permissions for important files and directories.\n"
"The following permissions are checked periodically, and any change to the owner, group,\n"
"or current permission is reported. The permissions can be enforced, automatically\n"
"changing them to the specified values when a change is detected.  "
msgstr ""

#: ../src/msec/msecgui.py:77
msgid "Save and apply new configuration?"
msgstr ""

#: ../src/msec/msecgui.py:143
msgid "_File"
msgstr ""

#: ../src/msec/msecgui.py:145
msgid "_Save configuration"
msgstr ""

#: ../src/msec/msecgui.py:147
msgid "_Import configuration"
msgstr ""

#: ../src/msec/msecgui.py:148
msgid "_Export configuration"
msgstr ""

#: ../src/msec/msecgui.py:150
msgid "_Quit"
msgstr ""

#: ../src/msec/msecgui.py:152 ../src/msec/msecgui.py:154
msgid "_Help"
msgstr ""

#: ../src/msec/msecgui.py:155
msgid "_About"
msgstr ""

#: ../src/msec/msecgui.py:182
msgid "MSEC: System Security and Audit"
msgstr ""

#: ../src/msec/msecgui.py:200
msgid "Basic security"
msgstr ""

#: ../src/msec/msecgui.py:201
msgid "System security"
msgstr ""

#: ../src/msec/msecgui.py:202
msgid "Network security"
msgstr ""

#: ../src/msec/msecgui.py:203
msgid "Periodic checks"
msgstr ""

#: ../src/msec/msecgui.py:204 ../src/msec/msecgui.py:809
msgid "Permissions"
msgstr ""

#: ../src/msec/msecgui.py:237
msgid "MSEC option changes"
msgstr ""

#: ../src/msec/msecgui.py:237
msgid "option"
msgstr ""

#: ../src/msec/msecgui.py:238
msgid "System permissions changes"
msgstr ""

#: ../src/msec/msecgui.py:238
msgid "permission check"
msgstr ""

#: ../src/msec/msecgui.py:248
msgid "changed %s <b>%s</b> (%s -> %s)"
msgstr ""

#: ../src/msec/msecgui.py:253
msgid "added %s <b>%s</b> (%s)"
msgstr ""

#: ../src/msec/msecgui.py:258
msgid "removed %s <b>%s</b>"
msgstr ""

#: ../src/msec/msecgui.py:262
msgid "no changes"
msgstr ""

#: ../src/msec/msecgui.py:274
msgid "Saving changes.."
msgstr ""

#: ../src/msec/msecgui.py:308
msgid ""
"<b>%s:</b> <i>%s</i>\n"
msgstr ""

#: ../src/msec/msecgui.py:315
msgid "<b>MSEC test run results:</b> <i>%s</i>"
msgstr ""

#: ../src/msec/msecgui.py:323
msgid "Details"
msgstr ""

#: ../src/msec/msecgui.py:329
msgid "MSEC messages (%s): %d"
msgstr ""

#: ../src/msec/msecgui.py:343
msgid "Details (%d changes).."
msgstr ""

#: ../src/msec/msecgui.py:388
msgid "No base msec level specified, using '%s'"
msgstr ""

#: ../src/msec/msecgui.py:391
msgid "Detected base msec level '%s'"
msgstr ""

#: ../src/msec/msecgui.py:396
msgid "Custom base config level '%s' found. Will default to '%s'"
msgstr ""

#: ../src/msec/msecgui.py:424
msgid "Security Option"
msgstr ""

#: ../src/msec/msecgui.py:434
msgid "Description"
msgstr ""

#: ../src/msec/msecgui.py:439
msgid "Value"
msgstr ""

#: ../src/msec/msecgui.py:449
msgid "Invalid option '%s'!"
msgstr ""

#: ../src/msec/msecgui.py:499
msgid "Enable MSEC tool"
msgstr ""

#: ../src/msec/msecgui.py:506
msgid "Select the base security level"
msgstr ""

#: ../src/msec/msecgui.py:510
msgid "Standard"
msgstr ""

#: ../src/msec/msecgui.py:523
msgid "Secure"
msgstr ""

#: ../src/msec/msecgui.py:540
msgid "Send security alerts by email"
msgstr ""

#: ../src/msec/msecgui.py:547
msgid "System administrator email address:"
msgstr ""

#: ../src/msec/msecgui.py:566
msgid "Display security alerts on desktop"
msgstr ""

#: ../src/msec/msecgui.py:727
msgid "Enable periodic security checks"
msgstr ""

#: ../src/msec/msecgui.py:791
msgid "Path"
msgstr ""

#: ../src/msec/msecgui.py:797
msgid "User"
msgstr ""

#: ../src/msec/msecgui.py:803
msgid "Group"
msgstr ""

#: ../src/msec/msecgui.py:817
msgid "Enforce"
msgstr ""

#: ../src/msec/msecgui.py:861
msgid "Reset to default level permissions"
msgstr ""

#: ../src/msec/msecgui.py:866
msgid "Add a rule"
msgstr ""

#: ../src/msec/msecgui.py:871
msgid "Delete"
msgstr ""

#: ../src/msec/msecgui.py:954
msgid "Changing permissions for %s"
msgstr ""

#: ../src/msec/msecgui.py:961
msgid "Adding new permission check"
msgstr ""

#: ../src/msec/msecgui.py:973
msgid ""
"Changing permissions on <b>%s</b>\n"
"Please specify new permissions, or use 'current' to keep current permissions.\n"
msgstr ""

#: ../src/msec/msecgui.py:981
msgid "File: "
msgstr ""

#: ../src/msec/msecgui.py:989
msgid "User: "
msgstr ""

#: ../src/msec/msecgui.py:997
msgid "Group: "
msgstr ""

#: ../src/msec/msecgui.py:1005
msgid "Permissions: "
msgstr ""

#: ../src/msec/msecgui.py:1066
msgid "Select new value for %s"
msgstr ""

#: ../src/msec/msecgui.py:1075
msgid ""
"<i>%s</i>\n"
"\n"
"\tCurrent value:\t\t\t<i>%s</i>\n"
"\t%sStandard level value:\t<i>%s</i>%s\n"
"\t%sSecure level value:\t\t<i>%s</i>%s\n"
msgstr ""

#: ../src/msec/msecgui.py:1086
msgid "New value:"
msgstr ""

#: ../src/msec/msecgui.py:1148
msgid "Save your changes?"
msgstr ""

#: ../src/msec/msecgui.py:1150
msgid "_Cancel"
msgstr ""

#: ../src/msec/msecgui.py:1151
msgid "_Ignore"
msgstr ""

#: ../src/msec/msecgui.py:1152
msgid "_Save"
msgstr ""

#: ../src/msec/msecgui.py:1154
msgid "Do you want to save changes before closing?"
msgstr ""

#: ../src/msec/plugins/pam.py:67
msgid "Using password to authenticate users"
msgstr ""

#: ../src/msec/plugins/pam.py:71
msgid "Don't use password to authenticate users"
msgstr ""

#: ../src/msec/plugins/pam.py:82
msgid "Password history not supported with pam_tcb."
msgstr ""

#: ../src/msec/plugins/pam.py:90
msgid "Invalid maximum password history length: \"%s\""
msgstr ""

#: ../src/msec/plugins/pam.py:105
msgid "Setting password history to %d."
msgstr ""

#: ../src/msec/plugins/pam.py:111
msgid "Disabling password history"
msgstr ""

#: ../src/msec/plugins/pam.py:123
msgid "Invalid password length \"%s\". Use \"length,ndigits,nupper\" as parameter"
msgstr ""

#: ../src/msec/plugins/pam.py:144
msgid "Setting minimum password length %d"
msgstr ""

#: ../src/msec/plugins/pam.py:168
msgid "Allowing su only from wheel group members"
msgstr ""

#: ../src/msec/plugins/pam.py:172
msgid "no wheel group"
msgstr ""

#: ../src/msec/plugins/pam.py:176
msgid "wheel group is empty"
msgstr ""

#: ../src/msec/plugins/pam.py:184
msgid "Allowing su for all"
msgstr ""

#: ../src/msec/plugins/pam.py:203
msgid "Allowing transparent root access for wheel group members"
msgstr ""

#: ../src/msec/plugins/pam.py:210
msgid "Disabling transparent root access for wheel group members"
msgstr ""