# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"POT-Creation-Date: 2010-02-04 11:31+BRST\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: ENCODING\n"
"Generated-By: pygettext.py 1.5\n"


#: ../src/msec/config.py:45
msgid "Modified system files"
msgstr ""

#: ../src/msec/config.py:46
msgid "No changes in system files"
msgstr ""

#: ../src/msec/config.py:59
msgid "Disabled"
msgstr ""

#: ../src/msec/config.py:195 ../src/msec/config.py:290
#: ../src/msec/config.py:393
msgid "Unable to load configuration file %s: %s"
msgstr ""

#: ../src/msec/config.py:209 ../src/msec/config.py:304
#: ../src/msec/config.py:415
msgid "Bad config option: %s"
msgstr ""

#: ../src/msec/config.py:244 ../src/msec/config.py:343
#: ../src/msec/config.py:441
msgid "Unable to save %s: %s"
msgstr ""

#: ../src/msec/help.py:14
msgid "Allow local users to connect to X server. Accepted arguments: yes (all connections are allowed), local (only local connection), no (no connection)."
msgstr ""

#: ../src/msec/help.py:16
msgid "Enable checking for files/directories writable by everybody."
msgstr ""

#: ../src/msec/help.py:18
msgid "Log syslog messages on console terminal 12."
msgstr ""

#: ../src/msec/help.py:20
msgid "Send mail reports even if no changes were detected."
msgstr ""

#: ../src/msec/help.py:22
msgid "Defines the base security level, on top of which the current configuration is based."
msgstr ""

#: ../src/msec/help.py:24
msgid "Accept broadcasted ICMP echo."
msgstr ""

#: ../src/msec/help.py:26
msgid "Enable msec to enforce file permissions to the values specified in the msec security policy."
msgstr ""

#: ../src/msec/help.py:28
msgid "Enable periodic permission checking for files specified in msec policy."
msgstr ""

#: ../src/msec/help.py:30
msgid "Allow X server to accept connections from network on tcp port 6000."
msgstr ""

#: ../src/msec/help.py:32
msgid "Enable checking for known rootkits using chkrootkit."
msgstr ""

#: ../src/msec/help.py:34
msgid "Enable verification for changes in the installed RPM packages. This will notify you when new packages are installed or removed."
msgstr ""

#: ../src/msec/help.py:36
msgid "Enable sectools checks. This check will run all sectool checks for a security level configuration. The security level to be used during this test is determined by the CHECK_SECTOOL_LEVELS variable."
msgstr ""

#: ../src/msec/help.py:38
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""

#: ../src/msec/help.py:40
msgid "Allow system reboot and shutdown to local users."
msgstr ""

#: ../src/msec/help.py:42
msgid "Enable checking for changes in firewall settings."
msgstr ""

#: ../src/msec/help.py:44
msgid "Enable checking for additions/removals of suid root files."
msgstr ""

#: ../src/msec/help.py:46
msgid "Enables logging of periodic checks to system log."
msgstr ""

#: ../src/msec/help.py:48
msgid "Enable crontab and at for users. Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1) and crontab(1))."
msgstr ""

#: ../src/msec/help.py:50
msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
msgstr ""

#: ../src/msec/help.py:52
msgid "Enable password-related checks, such as empty passwords and strange super-user accounts."
msgstr ""

#: ../src/msec/help.py:54
msgid "Set the password history length to prevent password reuse. This is not supported by pam_tcb."
msgstr ""

#: ../src/msec/help.py:56
msgid "Enable checksum verification for suid files."
msgstr ""

#: ../src/msec/help.py:58
msgid "Use secure location for temporary files. If this parameter is set to 'yes', user home directory will be used for temporary files. Otherwise, /tmp will be used."
msgstr ""

#: ../src/msec/help.py:60
msgid "User email to receive security notifications."
msgstr ""

#: ../src/msec/help.py:62
msgid "Set the user umask."
msgstr ""

#: ../src/msec/help.py:64
msgid "Allow only users in wheel group to su to root."
msgstr ""

#: ../src/msec/help.py:66
msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))."
msgstr ""

#: ../src/msec/help.py:68
msgid "Allow autologin."
msgstr ""

#: ../src/msec/help.py:70
msgid "Enable checking for changes in system users."
msgstr ""

#: ../src/msec/help.py:72
msgid "Enable checking for unowned files."
msgstr ""

#: ../src/msec/help.py:74
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""

#: ../src/msec/help.py:76
msgid "Allow display managers (kdm and gdm) to display list of local users."
msgstr ""

#: ../src/msec/help.py:78
msgid "Enable name resolution spoofing protection."
msgstr ""

#: ../src/msec/help.py:80
msgid "Enforce MSEC file directory permissions on system startup. If this parameter is set to 'enforce', system permissions will be enforced automatically, according to system security settings."
msgstr ""

#: ../src/msec/help.py:82
msgid "Include current directory into user PATH by default"
msgstr ""

#: ../src/msec/help.py:84
msgid "Enable permission checking on users' files that should not be owned by someone else, or writable."
msgstr ""

#: ../src/msec/help.py:86
msgid "Creates the symlink /etc/security/msec/server to point to /etc/security/msec/server.SERVER_LEVEL. The /etc/security/msec/server is used by chkconfig --add to decide to add a service if it is present in the file during the installation of packages. By default, two presets are provided: local (which only enables local services) and remote (which also enables some remote services considered safe). Note that the allowed services must be placed manually into the server.SERVER_LEVEL files when necessary."
msgstr ""

#: ../src/msec/help.py:88
msgid "Use password to authenticate users. Take EXTREME care when disabling passwords, as it will leave the machine vulnerable."
msgstr ""

#: ../src/msec/help.py:90
msgid "Show security notifications in system tray using libnotify."
msgstr ""

#: ../src/msec/help.py:92
msgid "Set umask option for mounting vfat and ntfs partitions. If umask is '-1', default system umask is used."
msgstr ""

#: ../src/msec/help.py:94
msgid "Enable checking for open network ports."
msgstr ""

#: ../src/msec/help.py:96
msgid "Allow direct root login on terminal."
msgstr ""

#: ../src/msec/help.py:98
msgid "Run security checks when machine is running on battery power."
msgstr ""

#: ../src/msec/help.py:100
msgid "Enable checking for changes in system groups."
msgstr ""

#: ../src/msec/help.py:102
msgid "Allow remote root login via sshd. If yes, login is allowed. If without-password, only public-key authentication logins are allowed. See sshd_config(5) man page for more information."
msgstr ""

#: ../src/msec/help.py:104
msgid "Enable logging of strange network packets."
msgstr ""

#: ../src/msec/help.py:106
msgid "Ask for root password when going to single user level (man sulogin(8))."
msgstr ""

#: ../src/msec/help.py:108
msgid "Enable IP spoofing protection."
msgstr ""

#: ../src/msec/help.py:110
msgid "Allow root access without password for the members of the wheel group."
msgstr ""

#: ../src/msec/help.py:112
msgid "Fix owner and group of unowned files to use nobody/nogroup."
msgstr ""

#: ../src/msec/help.py:114
msgid "Send security check results by email."
msgstr ""

#: ../src/msec/help.py:116
msgid "Allow to export display when passing from the root account to the other users. See pam_xauth(8) for more details."
msgstr ""

#: ../src/msec/help.py:118
msgid "Defines the sectool level to use during the periodic security check. You may use the sectool-gui application to select individual tests for each level. If this variable is not defined, the default level defined in sectool configuration will be used."
msgstr ""

#: ../src/msec/help.py:120
msgid "Enable daily security checks."
msgstr ""

#: ../src/msec/help.py:122
msgid "Accept ICMP echo."
msgstr ""

#: ../src/msec/help.py:124
msgid "Set the password minimum length and minimum number of digit and minimum number of capitalized letters, using length,ndigits,nupper format."
msgstr ""

#: ../src/msec/help.py:126
msgid "Allow full access to network services controlled by tcp_wrapper (see hosts.deny(5)). If yes, all services are allowed. If local, only connections to local services are authorized. If no, the services must be authorized manually in /etc/hosts.allow (see hosts.allow(5))."
msgstr ""

#: ../src/msec/help.py:128
msgid "Enable verification of integrity of installed RPM packages. This will notify you if checksums of the installed files were changed, showing separate results for binary and configuration files."
msgstr ""

#: ../src/msec/help.py:130
msgid "Set the root umask."
msgstr ""

#: ../src/msec/help.py:132
msgid "Perform hourly security check for changes in system configuration."
msgstr ""

#: ../src/msec/help.py:134
msgid "Enforce MSEC settings on system startup"
msgstr ""

#: ../src/msec/help.py:136
msgid "Enable periodic security check results to terminal."
msgstr ""

#: ../src/msec/help.py:138
msgid "Accept bogus IPv4 error messages."
msgstr ""

#: ../src/msec/help.py:140
msgid "Enable checking for additions/removals of sgid files."
msgstr ""

#: ../src/msec/help.py:142
msgid "Activate ethernet cards promiscuity check."
msgstr ""

#: ../src/msec/libmsec.py:266
msgid "%s modified so launched command: %s"
msgstr ""

#: ../src/msec/libmsec.py:275
msgid "%s modified so should have run command: %s"
msgstr ""

#: ../src/msec/libmsec.py:377 ../src/msec/libmsec.py:409
msgid "deleted %s"
msgstr ""

#: ../src/msec/libmsec.py:395
msgid "touched file %s"
msgstr ""

#: ../src/msec/libmsec.py:415
msgid "made symbolic link from %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:418
msgid "moved file %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:468 ../src/msec/libmsec.py:484
msgid "set variable %s to %s in %s"
msgstr ""

#: ../src/msec/libmsec.py:686
msgid "Error loading plugin '%s' from %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:703
msgid "Invalid callback: %s"
msgstr ""

#: ../src/msec/libmsec.py:712
msgid "Plugin %s not found"
msgstr ""

#: ../src/msec/libmsec.py:719
msgid "Not supported function '%s' in '%s'"
msgstr ""

#: ../src/msec/libmsec.py:726 ../src/msec/libmsec.py:856
msgid "In check-only mode, nothing is written back to disk."
msgstr ""

#: ../src/msec/libmsec.py:753
msgid "Invalid parameter for %s: '%s'. Valid parameters: '%s'."
msgstr ""

#: ../src/msec/libmsec.py:786
msgid "user name %s not found"
msgstr ""

#: ../src/msec/libmsec.py:798
msgid "user name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:810
msgid "group name %s not found"
msgstr ""

#: ../src/msec/libmsec.py:822
msgid "group name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:832
msgid "Unable to check /proc/mounts. Assuming all file systems are local."
msgstr ""

#: ../src/msec/libmsec.py:871
msgid "Forcing ownership of %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:875
msgid "Error changing user on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:877
msgid "Wrong owner of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:880
msgid "Enforcing group on %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:884
msgid "Error changing group on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:886
msgid "Wrong group of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:891
msgid "Enforcing permissions on %s to %o"
msgstr ""

#: ../src/msec/libmsec.py:895
msgid "Error changing permissions on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:897
msgid "Wrong permissions of %s: should be %o"
msgstr ""

#: ../src/msec/libmsec.py:914
msgid "bad permissions for '%s': '%s'"
msgstr ""

#: ../src/msec/libmsec.py:939
msgid "Non local file: \"%s\". Nothing changed."
msgstr ""

#: ../src/msec/libmsec.py:981
msgid "Checking paths: %s"
msgstr ""

#: ../src/msec/msec.py:87 ../src/msec/msecperms.py:96
msgid "Invalid security level '%s'."
msgstr ""

#: ../src/msec/msec.py:114 ../src/msec/msecperms.py:121
msgid ""
"Msec: Mandriva Security Center (%s)\n"
msgstr ""

#: ../src/msec/msec.py:115 ../src/msec/msecperms.py:122
msgid "Error: This application must be executed by root!"
msgstr ""

#: ../src/msec/msec.py:116 ../src/msec/msecperms.py:123
msgid "Run with --help to get help."
msgstr ""

#: ../src/msec/msec.py:142
msgid "Level '%s' not found, aborting."
msgstr ""

#: ../src/msec/msec.py:144
msgid "Switching to '%s' level."
msgstr ""

#: ../src/msec/msec.py:151
msgid "No custom file permissions for level '%s'."
msgstr ""

#: ../src/msec/msec.py:152
msgid "Saving file permissions to '%s' level."
msgstr ""

#: ../src/msec/msec.py:192 ../src/msec/msecperms.py:160
msgid "Unable to save config!"
msgstr ""

#: ../src/msec/msec.py:194
msgid "Unable to save file system permissions!"
msgstr ""

#: ../src/msec/msecgui.py:51
msgid ""
"<big><b>Choose security level</b></big>\n"
"This application allows you to configure your system security. If you wish\n"
"to activate it, choose the appropriate security level: "
msgstr ""

#: ../src/msec/msecgui.py:55
msgid "This profile configures a reasonably safe set of security features. It activates several non-intrusive periodic system checks. This is the suggested level for Desktop."
msgstr ""

#: ../src/msec/msecgui.py:57
msgid "This profile is configured to provide maximum security, even at the cost of limiting the remote access to the system. It also runs a wider set of periodic checks. This level is suggested for Servers and security-concerned systems . "
msgstr ""

#: ../src/msec/msecgui.py:60
msgid ""
"<big><b>System security options</b></big>\n"
"These options control the local security configuration, such as the login restrictions,\n"
"password configurations, integration with other security tools, and default file creation\n"
"permissions.  "
msgstr ""

#: ../src/msec/msecgui.py:65
msgid ""
"<big><b>Network security options</b></big>\n"
"These options define the network security against remote threats, unauthorized accesses,\n"
"and breakin attempts.  "
msgstr ""

#: ../src/msec/msecgui.py:69
msgid ""
"<big><b>Periodic security checks</b></big>\n"
"These options configure the security checks that should be executed periodically.  "
msgstr ""

#: ../src/msec/msecgui.py:72
msgid ""
"<big><b>Exceptions</b></big>\n"
"Here you can configure the allowed exceptions for msec periodic security\n"
"checks. For each supported test, you may add as many exceptions as you want\n"
"for each check. Note that each exception is parsed as a regexp."
msgstr ""

#: ../src/msec/msecgui.py:77
msgid ""
"<big><b>File permissions</b></big>\n"
"These options allow to fine-tune system permissions for important files and directories.\n"
"The following permissions are checked periodically, and any change to the owner, group,\n"
"or current permission is reported. The permissions can be enforced, automatically\n"
"changing them to the specified values when a change is detected.  "
msgstr ""

#: ../src/msec/msecgui.py:83
msgid "Save and apply new configuration?"
msgstr ""

#: ../src/msec/msecgui.py:151
msgid "_File"
msgstr ""

#: ../src/msec/msecgui.py:153
msgid "_Save configuration"
msgstr ""

#: ../src/msec/msecgui.py:158
msgid "_Quit"
msgstr ""

#: ../src/msec/msecgui.py:160 ../src/msec/msecgui.py:162
msgid "_Help"
msgstr ""

#: ../src/msec/msecgui.py:163
msgid "_About"
msgstr ""

#: ../src/msec/msecgui.py:190
msgid "MSEC: System Security and Audit"
msgstr ""

#: ../src/msec/msecgui.py:208
msgid "Basic security"
msgstr ""

#: ../src/msec/msecgui.py:209
msgid "System security"
msgstr ""

#: ../src/msec/msecgui.py:210
msgid "Network security"
msgstr ""

#: ../src/msec/msecgui.py:211
msgid "Periodic checks"
msgstr ""

#: ../src/msec/msecgui.py:212
msgid "Exceptions"
msgstr ""

#: ../src/msec/msecgui.py:213 ../src/msec/msecgui.py:890
msgid "Permissions"
msgstr ""

#: ../src/msec/msecgui.py:246
msgid "MSEC option changes"
msgstr ""

#: ../src/msec/msecgui.py:246
msgid "option"
msgstr ""

#: ../src/msec/msecgui.py:247
msgid "System permissions changes"
msgstr ""

#: ../src/msec/msecgui.py:247
msgid "permission check"
msgstr ""

#: ../src/msec/msecgui.py:257
msgid "changed %s <b>%s</b> (%s -> %s)"
msgstr ""

#: ../src/msec/msecgui.py:262
msgid "added %s <b>%s</b> (%s)"
msgstr ""

#: ../src/msec/msecgui.py:267
msgid "removed %s <b>%s</b>"
msgstr ""

#: ../src/msec/msecgui.py:271
msgid "no changes"
msgstr ""

#: ../src/msec/msecgui.py:283
msgid "Saving changes.."
msgstr ""

#: ../src/msec/msecgui.py:317
msgid ""
"<b>%s:</b> <i>%s</i>\n"
msgstr ""

#: ../src/msec/msecgui.py:324
msgid "<b>MSEC test run results:</b> <i>%s</i>"
msgstr ""

#: ../src/msec/msecgui.py:332
msgid "Details"
msgstr ""

#: ../src/msec/msecgui.py:338
msgid "MSEC messages (%s): %d"
msgstr ""

#: ../src/msec/msecgui.py:352
msgid "Details (%d changes).."
msgstr ""

#: ../src/msec/msecgui.py:405
msgid "No base msec level specified, using '%s'"
msgstr ""

#: ../src/msec/msecgui.py:408
msgid "Detected base msec level '%s'"
msgstr ""

#: ../src/msec/msecgui.py:413
msgid "Custom base config level '%s' found. Will default to '%s'"
msgstr ""

#: ../src/msec/msecgui.py:441
msgid "Security Option"
msgstr ""

#: ../src/msec/msecgui.py:451
msgid "Description"
msgstr ""

#: ../src/msec/msecgui.py:456
msgid "Value"
msgstr ""

#: ../src/msec/msecgui.py:466
msgid "Invalid option '%s'!"
msgstr ""

#: ../src/msec/msecgui.py:516
msgid "Enable MSEC tool"
msgstr ""

#: ../src/msec/msecgui.py:523
msgid "Select the base security level"
msgstr ""

#: ../src/msec/msecgui.py:527
msgid "Standard"
msgstr ""

#: ../src/msec/msecgui.py:536
msgid "Secure"
msgstr ""

#: ../src/msec/msecgui.py:549
msgid "Send security alerts by email"
msgstr ""

#: ../src/msec/msecgui.py:556
msgid "System administrator email address:"
msgstr ""

#: ../src/msec/msecgui.py:575
msgid "Display security alerts on desktop"
msgstr ""

#: ../src/msec/msecgui.py:739
msgid "Enable periodic security checks"
msgstr ""

#: ../src/msec/msecgui.py:801
msgid "Security check"
msgstr ""

#: ../src/msec/msecgui.py:807
msgid "Exception"
msgstr ""

#: ../src/msec/msecgui.py:828 ../src/msec/msecgui.py:947
msgid "Add a rule"
msgstr ""

#: ../src/msec/msecgui.py:833 ../src/msec/msecgui.py:952
msgid "Delete"
msgstr ""

#: ../src/msec/msecgui.py:872
msgid "Path"
msgstr ""

#: ../src/msec/msecgui.py:878
msgid "User"
msgstr ""

#: ../src/msec/msecgui.py:884
msgid "Group"
msgstr ""

#: ../src/msec/msecgui.py:898
msgid "Enforce"
msgstr ""

#: ../src/msec/msecgui.py:1051
msgid "Editing exception"
msgstr ""

#: ../src/msec/msecgui.py:1056
msgid "Adding new exception"
msgstr ""

#: ../src/msec/msecgui.py:1063
msgid ""
"Editing exception. Please select the correspondent msec check and exception value\n"
msgstr ""

#: ../src/msec/msecgui.py:1070
msgid "Check: "
msgstr ""

#: ../src/msec/msecgui.py:1085
msgid "Exception: "
msgstr ""

#: ../src/msec/msecgui.py:1120
msgid "Changing permissions for %s"
msgstr ""

#: ../src/msec/msecgui.py:1127
msgid "Adding new permission check"
msgstr ""

#: ../src/msec/msecgui.py:1139
msgid ""
"Changing permissions on <b>%s</b>\n"
"Please specify new permissions, or use 'current' to keep current permissions.\n"
msgstr ""

#: ../src/msec/msecgui.py:1139
msgid "new file"
msgstr ""

#: ../src/msec/msecgui.py:1147
msgid "File: "
msgstr ""

#: ../src/msec/msecgui.py:1155
msgid "User: "
msgstr ""

#: ../src/msec/msecgui.py:1163
msgid "Group: "
msgstr ""

#: ../src/msec/msecgui.py:1171
msgid "Permissions: "
msgstr ""

#: ../src/msec/msecgui.py:1232
msgid "Select new value for %s"
msgstr ""

#: ../src/msec/msecgui.py:1241
msgid ""
"<i>%s</i>\n"
"\n"
"\tCurrent value:\t\t\t<i>%s</i>\n"
"\t%sStandard level value:\t<i>%s</i>%s\n"
"\t%sSecure level value:\t\t<i>%s</i>%s\n"
msgstr ""

#: ../src/msec/msecgui.py:1252
msgid "New value:"
msgstr ""

#: ../src/msec/msecgui.py:1314
msgid "Save your changes?"
msgstr ""

#: ../src/msec/msecgui.py:1316
msgid "_Cancel"
msgstr ""

#: ../src/msec/msecgui.py:1317
msgid "_Ignore"
msgstr ""

#: ../src/msec/msecgui.py:1318
msgid "_Save"
msgstr ""

#: ../src/msec/msecgui.py:1320
msgid "Do you want to save changes before closing?"
msgstr ""

#: ../src/msec/plugins/msec.py:149
msgid "Allowing unrestricted chkconfig for packages"
msgstr ""

#: ../src/msec/plugins/msec.py:154
msgid "Restricting chkconfig for packages according to \"%s\" profile"
msgstr ""

#: ../src/msec/plugins/msec.py:164
msgid "Setting root umask to %s"
msgstr ""

#: ../src/msec/plugins/msec.py:174
msgid "Setting users umask to %s"
msgstr ""

#: ../src/msec/plugins/msec.py:195
msgid "Allowing users to connect X server from everywhere"
msgstr ""

#: ../src/msec/plugins/msec.py:198
msgid "Allowing users to connect X server from localhost"
msgstr ""

#: ../src/msec/plugins/msec.py:201
msgid "Restricting X server connection to the console user"
msgstr ""

#: ../src/msec/plugins/msec.py:204
msgid "invalid allow_x_connections arg: %s"
msgstr ""

#: ../src/msec/plugins/msec.py:227
msgid "Allowing the X server to listen to tcp connections"
msgstr ""

#: ../src/msec/plugins/msec.py:238
msgid "Forbidding the X server to listen to tcp connection"
msgstr ""

#: ../src/msec/plugins/msec.py:254
msgid "Invalid shell timeout \"%s\""
msgstr ""

#: ../src/msec/plugins/msec.py:262
msgid "Setting shell timeout to %s"
msgstr ""

#: ../src/msec/plugins/msec.py:270
msgid "Invalid shell history size \"%s\""
msgstr ""

#: ../src/msec/plugins/msec.py:281
msgid "Setting shell history size to %s"
msgstr ""

#: ../src/msec/plugins/msec.py:285
msgid "Removing limit on shell history size"
msgstr ""

#: ../src/msec/plugins/msec.py:294
msgid "Invalid file system umask \"%s\""
msgstr ""

#: ../src/msec/plugins/msec.py:328
msgid "Allowing reboot and shutdown to the console user"
msgstr ""

#: ../src/msec/plugins/msec.py:335
msgid "Allowing SysRq key to the console user"
msgstr ""

#: ../src/msec/plugins/msec.py:338
msgid "Allowing Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:342
msgid "Allowing Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:345
msgid "Allowing Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/plugins/msec.py:349
msgid "Forbidding reboot and shutdown to the console user"
msgstr ""

#: ../src/msec/plugins/msec.py:357
msgid "Forbidding SysRq key to the console user"
msgstr ""

#: ../src/msec/plugins/msec.py:360
msgid "Forbidding Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:364
msgid "Forbidding Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:367
msgid "Forbidding Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/plugins/msec.py:381
msgid "Allowing list of users in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:385
msgid "Allowing list of users in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:390
msgid "Forbidding list of users in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:394
msgid "Forbidding list of users in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:405
msgid "Allowing autologin"
msgstr ""

#: ../src/msec/plugins/msec.py:408
msgid "Forbidding autologin"
msgstr ""

#: ../src/msec/plugins/msec.py:413
msgid "Activating password in boot loader"
msgstr ""

#: ../src/msec/plugins/msec.py:427
msgid "Removing password in boot loader"
msgstr ""

#: ../src/msec/plugins/msec.py:442
msgid "Enabling log on console"
msgstr ""

#: ../src/msec/plugins/msec.py:446
msgid "Disabling log on console"
msgstr ""

#: ../src/msec/plugins/msec.py:463
msgid "Authorizing all services"
msgstr ""

#: ../src/msec/plugins/msec.py:467
msgid "Disabling all services"
msgstr ""

#: ../src/msec/plugins/msec.py:471
msgid "Disabling non local services"
msgstr ""

#: ../src/msec/plugins/msec.py:483
msgid "Enabling sulogin in single user runlevel"
msgstr ""

#: ../src/msec/plugins/msec.py:487
msgid "Disabling sulogin in single user runlevel"
msgstr ""

#: ../src/msec/plugins/msec.py:498
msgid "Enabling msec periodic runs"
msgstr ""

#: ../src/msec/plugins/msec.py:502
msgid "Disabling msec periodic runs"
msgstr ""

#: ../src/msec/plugins/msec.py:515
msgid "Enabling crontab and at"
msgstr ""

#: ../src/msec/plugins/msec.py:522
msgid "Disabling crontab and at"
msgstr ""

#: ../src/msec/plugins/msec.py:534
msgid "Allowing export display from root"
msgstr ""

#: ../src/msec/plugins/msec.py:538
msgid "Forbidding export display from root"
msgstr ""

#: ../src/msec/plugins/msec.py:564
msgid "Allowing direct root login"
msgstr ""

#: ../src/msec/plugins/msec.py:581
msgid "Forbidding direct root login"
msgstr ""

#: ../src/msec/plugins/msec.py:603
msgid "Using secure location for temporary files"
msgstr ""

#: ../src/msec/plugins/msec.py:605
msgid "Not using secure location for temporary files"
msgstr ""

#: ../src/msec/plugins/msec.py:625
msgid "Allowing including current directory in path"
msgstr ""

#: ../src/msec/plugins/msec.py:628
msgid "Not allowing including current directory in path"
msgstr ""

#: ../src/msec/plugins/network.py:134
msgid "Allowing remote root login"
msgstr ""

#: ../src/msec/plugins/network.py:138
msgid "Forbidding remote root login"
msgstr ""

#: ../src/msec/plugins/network.py:142
msgid "Allowing remote root login only by passphrase"
msgstr ""

#: ../src/msec/plugins/network.py:175
msgid "Enabling name resolution spoofing protection"
msgstr ""

#: ../src/msec/plugins/network.py:180
msgid "Disabling name resolution spoofing protection"
msgstr ""

#: ../src/msec/plugins/pam.py:67
msgid "Using password to authenticate users"
msgstr ""

#: ../src/msec/plugins/pam.py:71
msgid "Don't use password to authenticate users"
msgstr ""

#: ../src/msec/plugins/pam.py:82
msgid "Password history not supported with pam_tcb."
msgstr ""

#: ../src/msec/plugins/pam.py:90
msgid "Invalid maximum password history length: \"%s\""
msgstr ""

#: ../src/msec/plugins/pam.py:105
msgid "Setting password history to %d."
msgstr ""

#: ../src/msec/plugins/pam.py:111
msgid "Disabling password history"
msgstr ""

#: ../src/msec/plugins/pam.py:123
msgid "Invalid password length \"%s\". Use \"length,ndigits,nupper\" as parameter"
msgstr ""

#: ../src/msec/plugins/pam.py:144
msgid "Setting minimum password length %d"
msgstr ""

#: ../src/msec/plugins/pam.py:168
msgid "Allowing su only from wheel group members"
msgstr ""

#: ../src/msec/plugins/pam.py:172
msgid "no wheel group"
msgstr ""

#: ../src/msec/plugins/pam.py:176
msgid "wheel group is empty"
msgstr ""

#: ../src/msec/plugins/pam.py:184
msgid "Allowing su for all"
msgstr ""

#: ../src/msec/plugins/pam.py:203
msgid "Allowing transparent root access for wheel group members"
msgstr ""

#: ../src/msec/plugins/pam.py:210
msgid "Disabling transparent root access for wheel group members"
msgstr ""