# translation of DrakX-hi.po to हिन्दी, भारत (Hindi, India)
# Copyright (C) 2003,2004 Free Software Foundation, Inc.
# धनञ्जय शर्मा (Dhananjaya Sharma) <dysxhi@yahoo.co.in>, 2003, 2004.
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX-hi\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2010-02-04 11:31+BRST\n"
"PO-Revision-Date: 2004-04-04 21:54+0530\n"
"Last-Translator: धनञ्जय शर्मा (Dhananjaya Sharma) <dysxhi@yahoo.co.in>\n"
"Language-Team: हिन्दी (Hindi) <dysxhi@yahoo.co.in>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.3\n"

#: ../src/msec/config.py:45
msgid "Modified system files"
msgstr ""

#: ../src/msec/config.py:46
#, fuzzy
msgid "No changes in system files"
msgstr "बिना स्वामित्व वाली संचिकाओं के बारे में बतायें"

#: ../src/msec/config.py:59
msgid "Disabled"
msgstr ""

#: ../src/msec/config.py:195 ../src/msec/config.py:290
#: ../src/msec/config.py:393
msgid "Unable to load configuration file %s: %s"
msgstr ""

#: ../src/msec/config.py:209 ../src/msec/config.py:304
#: ../src/msec/config.py:415
#, fuzzy
msgid "Bad config option: %s"
msgstr "सांउड संरचना"

#: ../src/msec/config.py:244 ../src/msec/config.py:343
#: ../src/msec/config.py:441
msgid "Unable to save %s: %s"
msgstr ""

#: ../src/msec/help.py:14
#, fuzzy
msgid ""
"Allow local users to connect to X server. Accepted arguments: yes (all "
"connections are allowed), local (only local connection), no (no connection)."
msgstr ""
"एक्स संबंधों को अनुमति/निषेधाज्ञा:\n"
"\n"
"- ALL (सभी संबंध को अनुमति है),\n"
"\n"
"- LOCAL (सिर्फ़ स्थानीय कम्प्य़ूटर से संबंध),\n"
"\n"
"- NONE (कोई संबंध नहीं)."

#: ../src/msec/help.py:16
#, fuzzy
msgid "Enable checking for files/directories writable by everybody."
msgstr "सभी के द्वारा लेखन-योग्य संचिकाओं/निर्देशिकाओं की जाँच करें"

#: ../src/msec/help.py:18
msgid "Log syslog messages on console terminal 12."
msgstr ""

#: ../src/msec/help.py:20
msgid "Send mail reports even if no changes were detected."
msgstr ""

#: ../src/msec/help.py:22
msgid ""
"Defines the base security level, on top of which the current configuration "
"is based."
msgstr ""

#: ../src/msec/help.py:24
#, fuzzy
msgid "Accept broadcasted ICMP echo."
msgstr "घोषणा किये जा चुकी आईसीएमपी प्रतिध्वनि को स्वीकार करना"

#: ../src/msec/help.py:26
msgid ""
"Enable msec to enforce file permissions to the values specified in the msec "
"security policy."
msgstr ""

#: ../src/msec/help.py:28
msgid "Enable periodic permission checking for files specified in msec policy."
msgstr ""

#: ../src/msec/help.py:30
msgid "Allow X server to accept connections from network on tcp port 6000."
msgstr ""

#: ../src/msec/help.py:32
msgid "Enable checking for known rootkits using chkrootkit."
msgstr ""

#: ../src/msec/help.py:34
msgid ""
"Enable verification for changes in the installed RPM packages. This will "
"notify you when new packages are installed or removed."
msgstr ""

#: ../src/msec/help.py:36
msgid ""
"Enable sectools checks. This check will run all sectool checks for a "
"security level configuration. The security level to be used during this test "
"is determined by the CHECK_SECTOOL_LEVELS variable."
msgstr ""

#: ../src/msec/help.py:38
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""
"कोश निर्देशों के इतिहास के आकार को निर्धारित करें । एक -१ मूल्य का अर्थ असीमित है । "

#: ../src/msec/help.py:40
#, fuzzy
msgid "Allow system reboot and shutdown to local users."
msgstr "कन्सोल उपयोगकर्ता द्वारा रीबूट की अनुमति/निषेधाज्ञा । "

#: ../src/msec/help.py:42
#, fuzzy
msgid "Enable checking for changes in firewall settings."
msgstr "बिना स्वामित्व वाली संचिकाओं के बारे में बतायें"

#: ../src/msec/help.py:44
#, fuzzy
msgid "Enable checking for additions/removals of suid root files."
msgstr "एसयूआईडी वाली रूट संचिकाओं के जोड़ने/हटाने की जाँच करें"

#: ../src/msec/help.py:46
msgid "Enables logging of periodic checks to system log."
msgstr ""

#: ../src/msec/help.py:48
msgid ""
"Enable crontab and at for users. Put allowed users in /etc/cron.allow and /"
"etc/at.allow (see man at(1) and crontab(1))."
msgstr ""

#: ../src/msec/help.py:50
msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
msgstr ""

#: ../src/msec/help.py:52
msgid ""
"Enable password-related checks, such as empty passwords and strange super-"
"user accounts."
msgstr ""

#: ../src/msec/help.py:54
#, fuzzy
msgid ""
"Set the password history length to prevent password reuse. This is not "
"supported by pam_tcb."
msgstr "कूट-शब्द के पुन: उपयोग को रोकने के लिए कूटशब्द इतिहास सीमा निर्धारित करें ।"

#: ../src/msec/help.py:56
msgid "Enable checksum verification for suid files."
msgstr ""

#: ../src/msec/help.py:58
msgid ""
"Use secure location for temporary files. If this parameter is set to 'yes', "
"user home directory will be used for temporary files. Otherwise, /tmp will "
"be used."
msgstr ""

#: ../src/msec/help.py:60
#, fuzzy
msgid "User email to receive security notifications."
msgstr "कृपया प्रतिक्षा करें, सुरक्षा विकल्पों को स्थापित किया जा रहा है..."

#: ../src/msec/help.py:62
#, fuzzy
msgid "Set the user umask."
msgstr "उपयोगकर्ता यूमास्क को स्थापित करें"

#: ../src/msec/help.py:64
msgid "Allow only users in wheel group to su to root."
msgstr ""

#: ../src/msec/help.py:66
#, fuzzy
msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))."
msgstr "/etc/shadow में शुन्य कूट-शब्द की जाँच करें"

#: ../src/msec/help.py:68
#, fuzzy
msgid "Allow autologin."
msgstr "स्वतः सत्रारम्भ को अनुमति/निषेधज्ञा"

#: ../src/msec/help.py:70
#, fuzzy
msgid "Enable checking for changes in system users."
msgstr "बिना स्वामित्व वाली संचिकाओं के बारे में बतायें"

#: ../src/msec/help.py:72
#, fuzzy
msgid "Enable checking for unowned files."
msgstr "बिना स्वामित्व वाली संचिकाओं के बारे में बतायें"

#: ../src/msec/help.py:74
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr "कोश की समय-सीमा निर्धारित करें । एक शून्य मूल्य का अर्थ कोई समय-सीमा नहीं है ।"

#: ../src/msec/help.py:76
msgid "Allow display managers (kdm and gdm) to display list of local users."
msgstr ""

#: ../src/msec/help.py:78
#, fuzzy
msgid "Enable name resolution spoofing protection."
msgstr "नाम रेजयुलेशन स्पूफ़िंग सुरक्षा"

#: ../src/msec/help.py:80
msgid ""
"Enforce MSEC file directory permissions on system startup. If this parameter "
"is set to 'enforce', system permissions will be enforced automatically, "
"according to system security settings."
msgstr ""

#: ../src/msec/help.py:82
msgid "Include current directory into user PATH by default"
msgstr ""

#: ../src/msec/help.py:84
msgid ""
"Enable permission checking on users' files that should not be owned by "
"someone else, or writable."
msgstr ""

#: ../src/msec/help.py:86
msgid ""
"Creates the symlink /etc/security/msec/server to point to /etc/security/msec/"
"server.SERVER_LEVEL. The /etc/security/msec/server is used by chkconfig --"
"add to decide to add a service if it is present in the file during the "
"installation of packages. By default, two presets are provided: local (which "
"only enables local services) and remote (which also enables some remote "
"services considered safe). Note that the allowed services must be placed "
"manually into the server.SERVER_LEVEL files when necessary."
msgstr ""

#: ../src/msec/help.py:88
msgid ""
"Use password to authenticate users. Take EXTREME care when disabling "
"passwords, as it will leave the machine vulnerable."
msgstr ""

#: ../src/msec/help.py:90
msgid "Show security notifications in system tray using libnotify."
msgstr ""

#: ../src/msec/help.py:92
msgid ""
"Set umask option for mounting vfat and ntfs partitions. If umask is '-1', "
"default system umask is used."
msgstr ""

#: ../src/msec/help.py:94
msgid "Enable checking for open network ports."
msgstr ""

#: ../src/msec/help.py:96
#, fuzzy
msgid "Allow direct root login on terminal."
msgstr "सीधे रूट संत्र-आरम्भ की अनुमति/निषेधाज्ञा ।"

#: ../src/msec/help.py:98
msgid "Run security checks when machine is running on battery power."
msgstr ""

#: ../src/msec/help.py:100
#, fuzzy
msgid "Enable checking for changes in system groups."
msgstr "बिना स्वामित्व वाली संचिकाओं के बारे में बतायें"

#: ../src/msec/help.py:102
msgid ""
"Allow remote root login via sshd. If yes, login is allowed. If without-"
"password, only public-key authentication logins are allowed. See sshd_config"
"(5) man page for more information."
msgstr ""

#: ../src/msec/help.py:104
#, fuzzy
msgid "Enable logging of strange network packets."
msgstr "आईपी संस्मरण-४ के विचित्र पैकेटों की लॉग-इन को सक्रिय करना"

#: ../src/msec/help.py:106
msgid "Ask for root password when going to single user level (man sulogin(8))."
msgstr ""

#: ../src/msec/help.py:108
#, fuzzy
msgid "Enable IP spoofing protection."
msgstr "आईपी स्पूफ़िंग सुरक्षा सक्रिय"

#: ../src/msec/help.py:110
msgid "Allow root access without password for the members of the wheel group."
msgstr ""

#: ../src/msec/help.py:112
msgid "Fix owner and group of unowned files to use nobody/nogroup."
msgstr ""

#: ../src/msec/help.py:114
#, fuzzy
msgid "Send security check results by email."
msgstr "जाँच परिणामों को विपत्र द्वारा प्रेषित करें"

#: ../src/msec/help.py:116
msgid ""
"Allow to export display when passing from the root account to the other "
"users. See pam_xauth(8) for more details."
msgstr ""

#: ../src/msec/help.py:118
msgid ""
"Defines the sectool level to use during the periodic security check. You may "
"use the sectool-gui application to select individual tests for each level. "
"If this variable is not defined, the default level defined in sectool "
"configuration will be used."
msgstr ""

#: ../src/msec/help.py:120
#, fuzzy
msgid "Enable daily security checks."
msgstr "नित्य सुरक्षा जाँचों को चलायें"

#: ../src/msec/help.py:122
#, fuzzy
msgid "Accept ICMP echo."
msgstr "आईसीएमपी पराध्वनि को स्वीकार करें"

#: ../src/msec/help.py:124
#, fuzzy
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters, using length,ndigits,nupper format."
msgstr ""
"कूट-शब्द की लघुत्तम लंबाई और अंकों की लघुत्तम संख्या और बड़ें (कैप्टलाईय़ज) अक्षरों  की संख्या "
"निर्धारित करें ।"

#: ../src/msec/help.py:126
msgid ""
"Allow full access to network services controlled by tcp_wrapper (see hosts."
"deny(5)). If yes, all services are allowed. If local, only connections to "
"local services are authorized. If no, the services must be authorized "
"manually in /etc/hosts.allow (see hosts.allow(5))."
msgstr ""

#: ../src/msec/help.py:128
msgid ""
"Enable verification of integrity of installed RPM packages. This will notify "
"you if checksums of the installed files were changed, showing separate "
"results for binary and configuration files."
msgstr ""

#: ../src/msec/help.py:130
#, fuzzy
msgid "Set the root umask."
msgstr "रूट यूमास्क (umask) को स्थापित करें ।"

#: ../src/msec/help.py:132
msgid "Perform hourly security check for changes in system configuration."
msgstr ""

#: ../src/msec/help.py:134
msgid "Enforce MSEC settings on system startup"
msgstr ""

#: ../src/msec/help.py:136
msgid "Enable periodic security check results to terminal."
msgstr ""

#: ../src/msec/help.py:138
#, fuzzy
msgid "Accept bogus IPv4 error messages."
msgstr "बकवास आईपी संस्मरण-४ त्रुटि संदेशों को स्वीकार करें"

#: ../src/msec/help.py:140
#, fuzzy
msgid "Enable checking for additions/removals of sgid files."
msgstr "एसजीआईडी संचिकाओं का जोड़ना/हटाना को चेक करो"

#: ../src/msec/help.py:142
#, fuzzy
msgid "Activate ethernet cards promiscuity check."
msgstr "ईथरनेट कार्डों की अभेदता जाँच सक्रिय/निष्क्रिय ।"

#: ../src/msec/libmsec.py:266
msgid "%s modified so launched command: %s"
msgstr ""

#: ../src/msec/libmsec.py:275
msgid "%s modified so should have run command: %s"
msgstr ""

#: ../src/msec/libmsec.py:377 ../src/msec/libmsec.py:409
#, fuzzy
msgid "deleted %s"
msgstr "मिटायें"

#: ../src/msec/libmsec.py:395
#, fuzzy
msgid "touched file %s"
msgstr "ऐसी कोई फ़ाइल नहीं '%s'\n"

#: ../src/msec/libmsec.py:415
#, fuzzy
msgid "made symbolic link from %s to %s"
msgstr "ईएक्सटी-२ से ईएक्सटी-३ ले जाया जा रहा है"

#: ../src/msec/libmsec.py:418
msgid "moved file %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:468 ../src/msec/libmsec.py:484
msgid "set variable %s to %s in %s"
msgstr ""

#: ../src/msec/libmsec.py:686
msgid "Error loading plugin '%s' from %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:703
msgid "Invalid callback: %s"
msgstr ""

#: ../src/msec/libmsec.py:712
msgid "Plugin %s not found"
msgstr ""

#: ../src/msec/libmsec.py:719
msgid "Not supported function '%s' in '%s'"
msgstr ""

#: ../src/msec/libmsec.py:726 ../src/msec/libmsec.py:856
msgid "In check-only mode, nothing is written back to disk."
msgstr ""

#: ../src/msec/libmsec.py:753
msgid "Invalid parameter for %s: '%s'. Valid parameters: '%s'."
msgstr ""

#: ../src/msec/libmsec.py:786
#, fuzzy
msgid "user name %s not found"
msgstr "उपयोगकर्ता नाम काफ़ी लंबा है"

#: ../src/msec/libmsec.py:798
msgid "user name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:810
msgid "group name %s not found"
msgstr ""

#: ../src/msec/libmsec.py:822
msgid "group name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:832
msgid "Unable to check /proc/mounts. Assuming all file systems are local."
msgstr ""

#: ../src/msec/libmsec.py:871
#, fuzzy
msgid "Forcing ownership of %s to %s"
msgstr "ईएक्सटी-२ से ईएक्सटी-३ ले जाया जा रहा है"

#: ../src/msec/libmsec.py:875
#, fuzzy
msgid "Error changing user on %s: %s"
msgstr "%s को अवरोहण करने में त्रुटि: %s"

#: ../src/msec/libmsec.py:877
msgid "Wrong owner of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:880
#, fuzzy
msgid "Enforcing group on %s to %s"
msgstr "ईएक्सटी-२ से ईएक्सटी-३ ले जाया जा रहा है"

#: ../src/msec/libmsec.py:884
#, fuzzy
msgid "Error changing group on %s: %s"
msgstr "%s को अवरोहण करने में त्रुटि: %s"

#: ../src/msec/libmsec.py:886
msgid "Wrong group of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:891
msgid "Enforcing permissions on %s to %o"
msgstr ""

#: ../src/msec/libmsec.py:895
msgid "Error changing permissions on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:897
msgid "Wrong permissions of %s: should be %o"
msgstr ""

#: ../src/msec/libmsec.py:914
msgid "bad permissions for '%s': '%s'"
msgstr ""

#: ../src/msec/libmsec.py:939
msgid "Non local file: \"%s\". Nothing changed."
msgstr ""

#: ../src/msec/libmsec.py:981
#, fuzzy
msgid "Checking paths: %s"
msgstr "%s की जाँच हो रही है"

#: ../src/msec/msec.py:87 ../src/msec/msecperms.py:96
#, fuzzy
msgid "Invalid security level '%s'."
msgstr "सुरक्षा स्तर"

#: ../src/msec/msec.py:114 ../src/msec/msecperms.py:121
msgid "Msec: Mandriva Security Center (%s)\n"
msgstr ""

#: ../src/msec/msec.py:115 ../src/msec/msecperms.py:122
msgid "Error: This application must be executed by root!"
msgstr ""

#: ../src/msec/msec.py:116 ../src/msec/msecperms.py:123
msgid "Run with --help to get help."
msgstr ""

#: ../src/msec/msec.py:142
msgid "Level '%s' not found, aborting."
msgstr ""

#: ../src/msec/msec.py:144
#, fuzzy
msgid "Switching to '%s' level."
msgstr "ईएक्सटी-२ से ईएक्सटी-३ ले जाया जा रहा है"

#: ../src/msec/msec.py:151
msgid "No custom file permissions for level '%s'."
msgstr ""

#: ../src/msec/msec.py:152
#, fuzzy
msgid "Saving file permissions to '%s' level."
msgstr "ईएक्सटी-२ से ईएक्सटी-३ ले जाया जा रहा है"

#: ../src/msec/msec.py:192 ../src/msec/msecperms.py:160
msgid "Unable to save config!"
msgstr ""

#: ../src/msec/msec.py:194
msgid "Unable to save file system permissions!"
msgstr ""

#: ../src/msec/msecgui.py:51
msgid ""
"<big><b>Choose security level</b></big>\n"
"This application allows you to configure your system security. If you wish\n"
"to activate it, choose the appropriate security level: "
msgstr ""

#: ../src/msec/msecgui.py:55
msgid ""
"This profile configures a reasonably safe set of security features. It "
"activates several non-intrusive periodic system checks. This is the "
"suggested level for Desktop."
msgstr ""

#: ../src/msec/msecgui.py:57
msgid ""
"This profile is configured to provide maximum security, even at the cost of "
"limiting the remote access to the system. It also runs a wider set of "
"periodic checks. This level is suggested for Servers and security-concerned "
"systems . "
msgstr ""

#: ../src/msec/msecgui.py:60
msgid ""
"<big><b>System security options</b></big>\n"
"These options control the local security configuration, such as the login "
"restrictions,\n"
"password configurations, integration with other security tools, and default "
"file creation\n"
"permissions.  "
msgstr ""

#: ../src/msec/msecgui.py:65
msgid ""
"<big><b>Network security options</b></big>\n"
"These options define the network security against remote threats, "
"unauthorized accesses,\n"
"and breakin attempts.  "
msgstr ""

#: ../src/msec/msecgui.py:69
msgid ""
"<big><b>Periodic security checks</b></big>\n"
"These options configure the security checks that should be executed "
"periodically.  "
msgstr ""

#: ../src/msec/msecgui.py:72
msgid ""
"<big><b>Exceptions</b></big>\n"
"Here you can configure the allowed exceptions for msec periodic security\n"
"checks. For each supported test, you may add as many exceptions as you want\n"
"for each check. Note that each exception is parsed as a regexp."
msgstr ""

#: ../src/msec/msecgui.py:77
msgid ""
"<big><b>File permissions</b></big>\n"
"These options allow to fine-tune system permissions for important files and "
"directories.\n"
"The following permissions are checked periodically, and any change to the "
"owner, group,\n"
"or current permission is reported. The permissions can be enforced, "
"automatically\n"
"changing them to the specified values when a change is detected.  "
msgstr ""

#: ../src/msec/msecgui.py:83
#, fuzzy
msgid "Save and apply new configuration?"
msgstr "कृपया प्रतीक्षा करें... संरचना को लागू करें"

#: ../src/msec/msecgui.py:151
#, fuzzy
msgid "_File"
msgstr "चीली"

#: ../src/msec/msecgui.py:153
#, fuzzy
msgid "_Save configuration"
msgstr "सांउड संरचना"

#: ../src/msec/msecgui.py:158
#, fuzzy
msgid "_Quit"
msgstr "निकास"

#: ../src/msec/msecgui.py:160 ../src/msec/msecgui.py:162
#, fuzzy
msgid "_Help"
msgstr "सहायता"

#: ../src/msec/msecgui.py:163
#, fuzzy
msgid "_About"
msgstr "के बारे में"

#: ../src/msec/msecgui.py:190
#, fuzzy
msgid "MSEC: System Security and Audit"
msgstr "तंत्र समायोजनायें"

#: ../src/msec/msecgui.py:208
#, fuzzy
msgid "Basic security"
msgstr "नित्य सुरक्षा जाँच"

#: ../src/msec/msecgui.py:209
#, fuzzy
msgid "System security"
msgstr "सुरक्षा"

#: ../src/msec/msecgui.py:210
#, fuzzy
msgid "Network security"
msgstr "नयी प्रोफ़ाइल..."

#: ../src/msec/msecgui.py:211
#, fuzzy
msgid "Periodic checks"
msgstr "समय-समय पर की जाने वाली जाँचें"

#: ../src/msec/msecgui.py:212
#, fuzzy
msgid "Exceptions"
msgstr "विकल्पों"

#: ../src/msec/msecgui.py:213 ../src/msec/msecgui.py:890
msgid "Permissions"
msgstr "अनुमतियां"

#: ../src/msec/msecgui.py:246
msgid "MSEC option changes"
msgstr ""

#: ../src/msec/msecgui.py:246
#, fuzzy
msgid "option"
msgstr "विकल्पों"

#: ../src/msec/msecgui.py:247
#, fuzzy
msgid "System permissions changes"
msgstr "तंत्र के विकल्प"

#: ../src/msec/msecgui.py:247
#, fuzzy
msgid "permission check"
msgstr "अनुमतियां"

#: ../src/msec/msecgui.py:257
msgid "changed %s <b>%s</b> (%s -> %s)"
msgstr ""

#: ../src/msec/msecgui.py:262
msgid "added %s <b>%s</b> (%s)"
msgstr ""

#: ../src/msec/msecgui.py:267
msgid "removed %s <b>%s</b>"
msgstr ""

#: ../src/msec/msecgui.py:271
#, fuzzy
msgid "no changes"
msgstr "कोई सहभाजिता नहीं"

#: ../src/msec/msecgui.py:283
#, fuzzy
msgid "Saving changes.."
msgstr "पैकेजों को हटाया जा रहा है ..."

#: ../src/msec/msecgui.py:317
msgid "<b>%s:</b> <i>%s</i>\n"
msgstr ""

#: ../src/msec/msecgui.py:324
msgid "<b>MSEC test run results:</b> <i>%s</i>"
msgstr ""

#: ../src/msec/msecgui.py:332
msgid "Details"
msgstr "विस्तृत विवरण"

#: ../src/msec/msecgui.py:338
msgid "MSEC messages (%s): %d"
msgstr ""

#: ../src/msec/msecgui.py:352
msgid "Details (%d changes).."
msgstr ""

#: ../src/msec/msecgui.py:405
msgid "No base msec level specified, using '%s'"
msgstr ""

#: ../src/msec/msecgui.py:408
msgid "Detected base msec level '%s'"
msgstr ""

#: ../src/msec/msecgui.py:413
msgid "Custom base config level '%s' found. Will default to '%s'"
msgstr ""

#: ../src/msec/msecgui.py:441
#, fuzzy
msgid "Security Option"
msgstr "विकल्पों को बतायें"

#: ../src/msec/msecgui.py:451
#, fuzzy
msgid "Description"
msgstr "विकल्पों को बतायें"

#: ../src/msec/msecgui.py:456
#, fuzzy
msgid "Value"
msgstr "Palau"

#: ../src/msec/msecgui.py:466
#, fuzzy
msgid "Invalid option '%s'!"
msgstr "आधार-भूत विकल्प"

#: ../src/msec/msecgui.py:516
#, fuzzy
msgid "Enable MSEC tool"
msgstr "सीडीबूट को सक्रिय किया जायें?"

#: ../src/msec/msecgui.py:523
#, fuzzy
msgid "Select the base security level"
msgstr "कृपया इच्छित सुरक्षा स्तर का चयन करें"

#: ../src/msec/msecgui.py:527
msgid "Standard"
msgstr "सामान्य"

#: ../src/msec/msecgui.py:536
#, fuzzy
msgid "Secure"
msgstr "सुरक्षा"

#: ../src/msec/msecgui.py:549
#, fuzzy
msgid "Send security alerts by email"
msgstr "सुरक्षा चेतावनियां:"

#: ../src/msec/msecgui.py:556
#, fuzzy
msgid "System administrator email address:"
msgstr "महा-उपयोगकर्ता कूट-शब्द को निर्धारित करें"

#: ../src/msec/msecgui.py:575
msgid "Display security alerts on desktop"
msgstr ""

#: ../src/msec/msecgui.py:739
#, fuzzy
msgid "Enable periodic security checks"
msgstr "प्रत्येक घंटे पर एमसेक्क सुरक्षा जाँच को सक्रिय करें"

#: ../src/msec/msecgui.py:801
#, fuzzy
msgid "Security check"
msgstr "समय-समय पर की जाने वाली जाँचें"

#: ../src/msec/msecgui.py:807
#, fuzzy
msgid "Exception"
msgstr "विकल्पों"

#: ../src/msec/msecgui.py:828 ../src/msec/msecgui.py:947
#, fuzzy
msgid "Add a rule"
msgstr "उपयोगकर्ता जोड़ें"

#: ../src/msec/msecgui.py:833 ../src/msec/msecgui.py:952
msgid "Delete"
msgstr "मिटायें"

#: ../src/msec/msecgui.py:872
msgid "Path"
msgstr "पथ"

#: ../src/msec/msecgui.py:878
#, fuzzy
msgid "User"
msgstr "उपयोग-कर्ता पहचान संख्या"

#: ../src/msec/msecgui.py:884
#, fuzzy
msgid "Group"
msgstr "समूह पहचान संख्या"

#: ../src/msec/msecgui.py:898
#, fuzzy
msgid "Enforce"
msgstr "ध्यान ना दें"

#: ../src/msec/msecgui.py:1051
msgid "Editing exception"
msgstr ""

#: ../src/msec/msecgui.py:1056
msgid "Adding new exception"
msgstr ""

#: ../src/msec/msecgui.py:1063
msgid ""
"Editing exception. Please select the correspondent msec check and exception "
"value\n"
msgstr ""

#: ../src/msec/msecgui.py:1070
msgid "Check: "
msgstr ""

#: ../src/msec/msecgui.py:1085
msgid "Exception: "
msgstr ""

#: ../src/msec/msecgui.py:1120
msgid "Changing permissions for %s"
msgstr ""

#: ../src/msec/msecgui.py:1127
msgid "Adding new permission check"
msgstr ""

#: ../src/msec/msecgui.py:1139
msgid ""
"Changing permissions on <b>%s</b>\n"
"Please specify new permissions, or use 'current' to keep current "
"permissions.\n"
msgstr ""

#: ../src/msec/msecgui.py:1139
msgid "new file"
msgstr ""

#: ../src/msec/msecgui.py:1147
#, fuzzy
msgid "File: "
msgstr "/संचिका (_F)"

#: ../src/msec/msecgui.py:1155
#, fuzzy
msgid "User: "
msgstr "उपयोग-कर्ता पहचान संख्या"

#: ../src/msec/msecgui.py:1163
#, fuzzy
msgid "Group: "
msgstr "समूह पहचान संख्या"

#: ../src/msec/msecgui.py:1171
#, fuzzy
msgid "Permissions: "
msgstr "अनुमतियां"

#: ../src/msec/msecgui.py:1232
#, fuzzy
msgid "Select new value for %s"
msgstr "%s के लिए फ़र्मवेयर संचिका का चयन करें"

#: ../src/msec/msecgui.py:1241
msgid ""
"<i>%s</i>\n"
"\n"
"\tCurrent value:\t\t\t<i>%s</i>\n"
"\t%sStandard level value:\t<i>%s</i>%s\n"
"\t%sSecure level value:\t\t<i>%s</i>%s\n"
msgstr ""

#: ../src/msec/msecgui.py:1252
#, fuzzy
msgid "New value:"
msgstr "New Caledonia"

#: ../src/msec/msecgui.py:1314
msgid "Save your changes?"
msgstr ""

#: ../src/msec/msecgui.py:1316
#, fuzzy
msgid "_Cancel"
msgstr "निरस्त"

#: ../src/msec/msecgui.py:1317
#, fuzzy
msgid "_Ignore"
msgstr "ध्यान ना दें"

#: ../src/msec/msecgui.py:1318
#, fuzzy
msgid "_Save"
msgstr "सुरक्षित"

#: ../src/msec/msecgui.py:1320
#, fuzzy
msgid "Do you want to save changes before closing?"
msgstr "क्या आप /etc/fstab परिवर्तनों को सुरक्षित करना चाहते है"

#: ../src/msec/plugins/msec.py:149
msgid "Allowing unrestricted chkconfig for packages"
msgstr ""

#: ../src/msec/plugins/msec.py:154
msgid "Restricting chkconfig for packages according to \"%s\" profile"
msgstr ""

#: ../src/msec/plugins/msec.py:164
#, fuzzy
msgid "Setting root umask to %s"
msgstr "ईएक्सटी-२ से ईएक्सटी-३ ले जाया जा रहा है"

#: ../src/msec/plugins/msec.py:174
#, fuzzy
msgid "Setting users umask to %s"
msgstr "ईएक्सटी-२ से ईएक्सटी-३ ले जाया जा रहा है"

#: ../src/msec/plugins/msec.py:195
msgid "Allowing users to connect X server from everywhere"
msgstr ""

#: ../src/msec/plugins/msec.py:198
msgid "Allowing users to connect X server from localhost"
msgstr ""

#: ../src/msec/plugins/msec.py:201
msgid "Restricting X server connection to the console user"
msgstr ""

#: ../src/msec/plugins/msec.py:204
msgid "invalid allow_x_connections arg: %s"
msgstr ""

#: ../src/msec/plugins/msec.py:227
#, fuzzy
msgid "Allowing the X server to listen to tcp connections"
msgstr "एक्स विण्डो संबंधों को अनुमति"

#: ../src/msec/plugins/msec.py:238
msgid "Forbidding the X server to listen to tcp connection"
msgstr ""

#: ../src/msec/plugins/msec.py:254
#, fuzzy
msgid "Invalid shell timeout \"%s\""
msgstr "कोश की समय-सीमा समाप्त"

#: ../src/msec/plugins/msec.py:262
#, fuzzy
msgid "Setting shell timeout to %s"
msgstr "कोश की समय-सीमा समाप्त"

#: ../src/msec/plugins/msec.py:270
#, fuzzy
msgid "Invalid shell history size \"%s\""
msgstr "कोश इतिहास आकार"

#: ../src/msec/plugins/msec.py:281
#, fuzzy
msgid "Setting shell history size to %s"
msgstr "कोश इतिहास आकार"

#: ../src/msec/plugins/msec.py:285
#, fuzzy
msgid "Removing limit on shell history size"
msgstr "कोश इतिहास आकार"

#: ../src/msec/plugins/msec.py:294
#, fuzzy
msgid "Invalid file system umask \"%s\""
msgstr "कोश की समय-सीमा समाप्त"

#: ../src/msec/plugins/msec.py:328
#, fuzzy
msgid "Allowing reboot and shutdown to the console user"
msgstr "कन्सोल उपयोगकर्ता द्वारा रीबूट की अनुमति/निषेधाज्ञा । "

#: ../src/msec/plugins/msec.py:335
#, fuzzy
msgid "Allowing SysRq key to the console user"
msgstr "कन्सोल उपयोगकर्ता द्वारा रीबूट की अनुमति/निषेधाज्ञा । "

#: ../src/msec/plugins/msec.py:338
msgid "Allowing Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:342
msgid "Allowing Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:345
msgid "Allowing Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/plugins/msec.py:349
#, fuzzy
msgid "Forbidding reboot and shutdown to the console user"
msgstr "कन्सोल उपयोगकर्ता द्वारा रीबूट की अनुमति/निषेधाज्ञा । "

#: ../src/msec/plugins/msec.py:357
#, fuzzy
msgid "Forbidding SysRq key to the console user"
msgstr "कन्सोल उपयोगकर्ता द्वारा रीबूट"

#: ../src/msec/plugins/msec.py:360
msgid "Forbidding Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:364
msgid "Forbidding Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:367
msgid "Forbidding Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/plugins/msec.py:381
msgid "Allowing list of users in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:385
msgid "Allowing list of users in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:390
msgid "Forbidding list of users in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:394
msgid "Forbidding list of users in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:405
#, fuzzy
msgid "Allowing autologin"
msgstr "स्वतः सत्रारम्भ को अनुमति/निषेधज्ञा"

#: ../src/msec/plugins/msec.py:408
#, fuzzy
msgid "Forbidding autologin"
msgstr "स्वतः सत्रारम्भ को अनुमति/निषेधज्ञा"

#: ../src/msec/plugins/msec.py:413
msgid "Activating password in boot loader"
msgstr ""

#: ../src/msec/plugins/msec.py:427
#, fuzzy
msgid "Removing password in boot loader"
msgstr "के लिए कोई कूटशब्द आयू-सीमा नहीं"

#: ../src/msec/plugins/msec.py:442
#, fuzzy
msgid "Enabling log on console"
msgstr "कन्सोल-१२ पर तंत्र लॉग रिपोर्ट को सक्रिय/निष्क्रिय"

#: ../src/msec/plugins/msec.py:446
#, fuzzy
msgid "Disabling log on console"
msgstr "पहचान-चिह्न का कन्सोल पर अवलोकन"

#: ../src/msec/plugins/msec.py:463
msgid "Authorizing all services"
msgstr ""

#: ../src/msec/plugins/msec.py:467
msgid "Disabling all services"
msgstr ""

#: ../src/msec/plugins/msec.py:471
#, fuzzy
msgid "Disabling non local services"
msgstr "स्थानीय स्कैनरों की सहभाजिता"

#: ../src/msec/plugins/msec.py:483
#, fuzzy
msgid "Enabling sulogin in single user runlevel"
msgstr "ऐकल उपयोगकर्ता स्तर में Sulogin(8)"

#: ../src/msec/plugins/msec.py:487
#, fuzzy
msgid "Disabling sulogin in single user runlevel"
msgstr "ऐकल उपयोगकर्ता स्तर में Sulogin(8)"

#: ../src/msec/plugins/msec.py:498
#, fuzzy
msgid "Enabling msec periodic runs"
msgstr "%s स्वैप विभाजन को सक्रिय किया जा रहा है"

#: ../src/msec/plugins/msec.py:502
msgid "Disabling msec periodic runs"
msgstr ""

#: ../src/msec/plugins/msec.py:515
#, fuzzy
msgid "Enabling crontab and at"
msgstr "\"crontab\" व \"at\" को उपयोगकर्ताओं के लिए सक्रिय करें"

#: ../src/msec/plugins/msec.py:522
#, fuzzy
msgid "Disabling crontab and at"
msgstr "\"crontab\" व \"at\" को उपयोगकर्ताओं के लिए सक्रिय करें"

#: ../src/msec/plugins/msec.py:534
msgid "Allowing export display from root"
msgstr ""

#: ../src/msec/plugins/msec.py:538
msgid "Forbidding export display from root"
msgstr ""

#: ../src/msec/plugins/msec.py:564
#, fuzzy
msgid "Allowing direct root login"
msgstr "सीधे रूट संत्र-आरम्भ की अनुमति/निषेधाज्ञा ।"

#: ../src/msec/plugins/msec.py:581
#, fuzzy
msgid "Forbidding direct root login"
msgstr "सीधे रूट संत्र-आरम्भ की अनुमति/निषेधाज्ञा ।"

#: ../src/msec/plugins/msec.py:603
msgid "Using secure location for temporary files"
msgstr ""

#: ../src/msec/plugins/msec.py:605
msgid "Not using secure location for temporary files"
msgstr ""

#: ../src/msec/plugins/msec.py:625
msgid "Allowing including current directory in path"
msgstr ""

#: ../src/msec/plugins/msec.py:628
msgid "Not allowing including current directory in path"
msgstr ""

#: ../src/msec/plugins/network.py:134
#, fuzzy
msgid "Allowing remote root login"
msgstr "सुदूर रूट संत्र-आरम्भ को अनुमति"

#: ../src/msec/plugins/network.py:138
#, fuzzy
msgid "Forbidding remote root login"
msgstr "सुदूर महा-उपयोगकर्ता संत्र-आरम्भ की अनुमति/निषेधाज्ञा ।"

#: ../src/msec/plugins/network.py:142
#, fuzzy
msgid "Allowing remote root login only by passphrase"
msgstr "सुदूर रूट संत्र-आरम्भ को अनुमति"

#: ../src/msec/plugins/network.py:175
#, fuzzy
msgid "Enabling name resolution spoofing protection"
msgstr "नाम रेजयुलेशन स्पूफ़िंग सुरक्षा"

#: ../src/msec/plugins/network.py:180
#, fuzzy
msgid "Disabling name resolution spoofing protection"
msgstr "नाम रेजयुलेशन स्पूफ़िंग सुरक्षा"

#: ../src/msec/plugins/pam.py:67
#, fuzzy
msgid "Using password to authenticate users"
msgstr "उपयोगकर्ताओं की प्रमाणिकता को जाँचने के लिए कूट-शब्द का उपयोग"

#: ../src/msec/plugins/pam.py:71
#, fuzzy
msgid "Don't use password to authenticate users"
msgstr "उपयोगकर्ताओं की प्रमाणिकता को जाँचने के लिए कूट-शब्द का उपयोग"

#: ../src/msec/plugins/pam.py:82
msgid "Password history not supported with pam_tcb."
msgstr ""

#: ../src/msec/plugins/pam.py:90
#, fuzzy
msgid "Invalid maximum password history length: \"%s\""
msgstr "कूटशब्द इतिहास की लंबाई"

#: ../src/msec/plugins/pam.py:105
#, fuzzy
msgid "Setting password history to %d."
msgstr "कूटशब्द इतिहास की लंबाई"

#: ../src/msec/plugins/pam.py:111
#, fuzzy
msgid "Disabling password history"
msgstr "कूटशब्द इतिहास की लंबाई"

#: ../src/msec/plugins/pam.py:123
msgid ""
"Invalid password length \"%s\". Use \"length,ndigits,nupper\" as parameter"
msgstr ""

#: ../src/msec/plugins/pam.py:144
msgid "Setting minimum password length %d"
msgstr ""

#: ../src/msec/plugins/pam.py:168
#, fuzzy
msgid "Allowing su only from wheel group members"
msgstr "व्हील समूह सदस्यों या किसी उपयोगकर्ता के लिए सिर्फ़ महा-उपयोगकर्ता को सक्रिय करें"

#: ../src/msec/plugins/pam.py:172
msgid "no wheel group"
msgstr ""

#: ../src/msec/plugins/pam.py:176
msgid "wheel group is empty"
msgstr ""

#: ../src/msec/plugins/pam.py:184
msgid "Allowing su for all"
msgstr ""

#: ../src/msec/plugins/pam.py:203
msgid "Allowing transparent root access for wheel group members"
msgstr ""

#: ../src/msec/plugins/pam.py:210
#, fuzzy
msgid "Disabling transparent root access for wheel group members"
msgstr "व्हील समूह सदस्यों या किसी उपयोगकर्ता के लिए सिर्फ़ महा-उपयोगकर्ता को सक्रिय करें"

#, fuzzy
#~ msgid "'%s' is not available in this version"
#~ msgstr "%s को %s के इस संस्मरण के द्वारा समर्थन नहीं प्राप्त है ।"

#, fuzzy
#~ msgid "Activating daily security check"
#~ msgstr "नित्य सुरक्षा जाँच को सक्रिय/निष्क्रिय करें ।"

#, fuzzy
#~ msgid "Disabling daily security check"
#~ msgstr "नित्य सुरक्षा जाँच"

#, fuzzy
#~ msgid "Activating periodic promiscuity check"
#~ msgstr "ईथरनेट कार्डों की अभेदता जाँच सक्रिय/निष्क्रिय ।"

#, fuzzy
#~ msgid "Disabling periodic promiscuity check"
#~ msgstr "ईथरनेट कार्डो की अभेद जाँच"

#, fuzzy
#~ msgid "_Import configuration"
#~ msgstr "सांउड संरचना"

#, fuzzy
#~ msgid "_Export configuration"
#~ msgstr "सांउड संरचना"

#, fuzzy
#~ msgid "Save and apply current policy"
#~ msgstr "कृपया प्रतीक्षा करें... संरचना को लागू करें"

#, fuzzy
#~ msgid "Quit"
#~ msgstr "निकास"