# translation of DrakX.po to Arabic
# Amr Fathy <amr10@menanet.net>, 2001.
# Mohammed Gamal <f2c2001@yahoo.com>, 2002.
# Youcef Rabah Rahal <rahal@arabeyes.org>, 2004.
# Ossama M. Khayat <okhayat@yahoo.com>, 2004, 2005.
# Munzir Taha <munzir@kacst.edu.sa>, 2004.
# Abdulaziz Al-Arfaj <alarfaj@arabeyes.org>, 2005.
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2013-08-04 18:39+EEST\n"
"PO-Revision-Date: 2005-03-03 01:06+0300\n"
"Last-Translator: Ossama M. Khayat <okhayat@yahoo.com>\n"
"Language-Team: Arabic <support@arabeyes.org>\n"
"Language: ar\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.9.1\n"
"Plural-Forms: nplurals=4; plural=n==1 ? 0 : n==2 ? 1 : n>=3 && n<=10 ? 2 : "
"3\n"

#: ../src/msec/config.py:46
msgid "Modified system files"
msgstr ""

#: ../src/msec/config.py:47
#, fuzzy
msgid "No changes in system files"
msgstr "قم بتقرير الملفات الغير مملوكة"

#: ../src/msec/config.py:60 ../src/msec/tools.py:36
msgid "Disabled"
msgstr ""

#: ../src/msec/config.py:211 ../src/msec/config.py:423
msgid "Unable to load configuration file %s: %s"
msgstr ""

#: ../src/msec/config.py:225 ../src/msec/config.py:334
#: ../src/msec/config.py:442
#, fuzzy
msgid "Bad config option: %s"
msgstr "إعدادات الصوت"

#: ../src/msec/config.py:260 ../src/msec/config.py:373
#: ../src/msec/config.py:468
msgid "Unable to save %s: %s"
msgstr ""

#: ../src/msec/config.py:319
msgid "loading exceptions file %s: %s"
msgstr ""

#: ../src/msec/config.py:320
#, fuzzy
msgid "No exceptions loaded"
msgstr "خيارات"

#: ../src/msec/help.py:14
#, fuzzy
msgid ""
"Allow local users to connect to X server. Accepted arguments: yes (all "
"connections are allowed), local (only local connection), no (no connection)."
msgstr ""
"سماح/منع اتّصالات X:\n"
"\n"
"- ALL (كل الاتّصالات مسموحة),\n"
"\n"
"- LOCAL (فقط الاتّصالات من الجهاز المحلّي),\n"
"\n"
"- NONE (لا اتصال)."

#: ../src/msec/help.py:16
#, fuzzy
msgid "Enable checking for files/directories writable by everybody."
msgstr "تحقّق من الملفّات/الأدلّة التي يمكن الكتابة عليها بواسطة الكلّ"

#: ../src/msec/help.py:18
#, fuzzy
msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))."
msgstr "تحقق من وجود كلمة مرور فارغة في /etc/shadow."

#: ../src/msec/help.py:20
msgid "Log syslog messages on console terminal 12."
msgstr ""

#: ../src/msec/help.py:22
msgid "Send mail reports even if no changes were detected."
msgstr ""

#: ../src/msec/help.py:24
msgid ""
"Defines the base security level, on top of which the current configuration "
"is based."
msgstr ""

#: ../src/msec/help.py:26
#, fuzzy
msgid "Accept broadcasted ICMP echo."
msgstr "قبول broadcasted icmp echo"

#: ../src/msec/help.py:28
msgid ""
"Enable verification for changes in the installed RPM packages. This will "
"notify you when new packages are installed or removed."
msgstr ""

#: ../src/msec/help.py:30
msgid "Enable periodic permission checking for files specified in msec policy."
msgstr ""

#: ../src/msec/help.py:32
msgid "Ignore changes in process IDs when checking for open network ports."
msgstr ""

#: ../src/msec/help.py:34
msgid "Allow X server to accept connections from network on tcp port 6000."
msgstr ""

#: ../src/msec/help.py:36
msgid "Enable checking for known rootkits using chkrootkit."
msgstr ""

#: ../src/msec/help.py:38
msgid ""
"Enable msec to enforce file permissions to the values specified in the msec "
"security policy."
msgstr ""

#: ../src/msec/help.py:40
msgid ""
"Enable sectools checks. This check will run all sectool checks for a "
"security level configuration. The security level to be used during this test "
"is determined by the CHECK_SECTOOL_LEVELS variable."
msgstr ""

#: ../src/msec/help.py:42
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr "تحديد حجم تاريخ أوامر الصّدفة. القيمة -1 تعني غير محدود."

#: ../src/msec/help.py:44
#, fuzzy
msgid "Allow system reboot and shutdown to local users."
msgstr "سماح/منع إعادة التّشغيل بواسطة مستخدم الشّاشة الطّرفيّة."

#: ../src/msec/help.py:46
#, fuzzy
msgid "Enable checking for changes in firewall settings."
msgstr "قم بتقرير الملفات الغير مملوكة"

#: ../src/msec/help.py:48
#, fuzzy
msgid "Enable checking for additions/removals of suid root files."
msgstr "تحقّق من الإضافات/الإزالات لملفّات suid الجذريّة"

#: ../src/msec/help.py:50
msgid "Include current directory into user PATH by default"
msgstr ""

#: ../src/msec/help.py:52
#, fuzzy
msgid ""
"Enable crontab and at for users. Put allowed users in /etc/cron.allow and /"
"etc/at.allow (see man at(1) and crontab(1))."
msgstr ""
"تمكين/تعطيل crontab و at للمستخدمين.\n"
"\n"
"ضع المستخدمين المُخوّلين في /etc/cron.allow و /etc/at.allow (راجع man at(1)\n"
"و crontab(1))."

#: ../src/msec/help.py:54
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr "تحديد وقت انتهاء الصّدفة. القيم صفر تعني لا وقت انتهاء."

#: ../src/msec/help.py:56
msgid ""
"Enable password-related checks, such as empty passwords and strange super-"
"user accounts."
msgstr ""

#: ../src/msec/help.py:58
#, fuzzy
msgid ""
"Set the password history length to prevent password reuse. This is not "
"supported by pam_tcb."
msgstr "تحديد طول تاريخ كلمة المرور لمنع إعادة استخدامها."

#: ../src/msec/help.py:60
#, fuzzy
msgid "Set the user umask."
msgstr "تحديد umask الخاص بالمستخدم."

#: ../src/msec/help.py:62
msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
msgstr ""

#: ../src/msec/help.py:64
#, fuzzy
msgid "User email to receive security notifications."
msgstr "الرجاء الانتظار، تعيين خيارات الأمن..."

#: ../src/msec/help.py:66
#, fuzzy
msgid "Allow autologin."
msgstr "سماح/منع الدخول التلقائي"

#: ../src/msec/help.py:68
msgid "Allow only users in wheel group to su to root."
msgstr ""

#: ../src/msec/help.py:70
#, fuzzy
msgid "Enable daily security checks."
msgstr "تشغيل الاختبارات الأمنية اليومية"

#: ../src/msec/help.py:72
msgid ""
"Use secure location for temporary files. If this parameter is set to 'yes', "
"user home directory will be used for temporary files. Otherwise, /tmp will "
"be used."
msgstr ""

#: ../src/msec/help.py:74
#, fuzzy
msgid "Allow direct root login on terminal."
msgstr "سماح/منع دخول المسخدم root المباشر."

#: ../src/msec/help.py:76
#, fuzzy
msgid "Enable checking for changes in system users."
msgstr "قم بتقرير الملفات الغير مملوكة"

#: ../src/msec/help.py:78
#, fuzzy
msgid "Enable checking for unowned files."
msgstr "قم بتقرير الملفات الغير مملوكة"

#: ../src/msec/help.py:80
#, fuzzy
msgid "Enable IP spoofing protection."
msgstr "تمكين الحماية من خداع IP"

#: ../src/msec/help.py:82
msgid "Allow display managers (kdm and gdm) to display list of local users."
msgstr ""

#: ../src/msec/help.py:84
#, fuzzy
msgid "Enable name resolution spoofing protection."
msgstr "الحماية من خداع حلّ الاسم"

#: ../src/msec/help.py:86
msgid ""
"Enforce MSEC file directory permissions on system startup. If this parameter "
"is set to 'enforce', system permissions will be enforced automatically, "
"according to system security settings."
msgstr ""

#: ../src/msec/help.py:88
msgid "Enables logging of periodic checks to system log."
msgstr ""

#: ../src/msec/help.py:90
msgid ""
"Enable permission checking on users' files that should not be owned by "
"someone else, or writable."
msgstr ""

#: ../src/msec/help.py:92
msgid ""
"Creates the symlink /etc/security/msec/server to point to /etc/security/msec/"
"server.SERVER_LEVEL. The /etc/security/msec/server is used by chkconfig --"
"add to decide to add a service if it is present in the file during the "
"installation of packages. By default, two presets are provided: local (which "
"only enables local services) and remote (which also enables some remote "
"services considered safe). Note that the allowed services must be placed "
"manually into the server.SERVER_LEVEL files when necessary."
msgstr ""

#: ../src/msec/help.py:94
msgid ""
"Use password to authenticate users. Take EXTREME care when disabling "
"passwords, as it will leave the machine vulnerable."
msgstr ""

#: ../src/msec/help.py:96
#, fuzzy
msgid "Enable checking for changes in system groups."
msgstr "قم بتقرير الملفات الغير مملوكة"

#: ../src/msec/help.py:98
msgid ""
"Set umask option for mounting vfat and ntfs partitions. If umask is '-1', "
"default system umask is used."
msgstr ""

#: ../src/msec/help.py:100
msgid "Show security notifications in system tray using libnotify."
msgstr ""

#: ../src/msec/help.py:102
msgid "Enable checking for open network ports."
msgstr ""

#: ../src/msec/help.py:104
msgid "Run security checks when machine is running on battery power."
msgstr ""

#: ../src/msec/help.py:106
msgid "Perform hourly security check for changes in system configuration."
msgstr ""

#: ../src/msec/help.py:108
msgid ""
"Allow remote root login via sshd. If yes, login is allowed. If without-"
"password, only public-key authentication logins are allowed. See "
"sshd_config(5) man page for more information."
msgstr ""

#: ../src/msec/help.py:110
#, fuzzy
msgid "Enable logging of strange network packets."
msgstr "تمكين تسجيل حزم IPv4 الغريبة"

#: ../src/msec/help.py:112
msgid ""
"Define the default retention period for logs, in weeks. Some countries "
"require that the log files should be kept for 12 months, other do not have "
"such strict requirements. This variable defines the number of past log files "
"that should be kept by logrotate on the system."
msgstr ""

#: ../src/msec/help.py:114
msgid "Ask for root password when going to single user level (man sulogin(8))."
msgstr ""

#: ../src/msec/help.py:116
msgid "Allow root access without password for the members of the wheel group."
msgstr ""

#: ../src/msec/help.py:118
msgid "Fix owner and group of unowned files to use nobody/nogroup."
msgstr ""

#: ../src/msec/help.py:120
#, fuzzy
msgid "Send security check results by email."
msgstr "أرسل تقرير نتيجة الفحص بالبريد"

#: ../src/msec/help.py:122
#, fuzzy
msgid ""
"Allow to export display when passing from the root account to the other "
"users. See pam_xauth(8) for more details."
msgstr ""
"سماح/منع تصدير العرض عند\n"
"المرور من حساب المستخدم الجذر إلى المستخدمين الآخرين.\n"
"\n"
"راجع pam_xauth(8) للمزيد من التّفاصيل."

#: ../src/msec/help.py:124
msgid ""
"Allow users in wheel group to use sudo. If this option is set to 'yes', the "
"users in wheel group are allowed to use sudo and run commands as root by "
"using their passwords. If this option to set to 'without-password', the "
"users can use sudo without being asked for their password. WARNING: using "
"sudo without any password makes your system very vulnerable, and you should "
"only use this setting if you know what you are doing!"
msgstr ""

#: ../src/msec/help.py:126
msgid "Enable checksum verification for suid files."
msgstr ""

#: ../src/msec/help.py:128
#, fuzzy
msgid "Accept ICMP echo."
msgstr "قبول صدى icmp"

#: ../src/msec/help.py:130
#, fuzzy
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters, using length,ndigits,nupper format."
msgstr "تحديد طول كلمة المرور الأدنى وأقل عدد أرقام وأقل عدد أحرف استهلاليّة."

#: ../src/msec/help.py:132
#, fuzzy
msgid ""
"Allow full access to network services controlled by tcp_wrapper (see hosts."
"deny(5)). If yes, all services are allowed. If local, only connections to "
"local services are authorized. If no, the services must be authorized "
"manually in /etc/hosts.allow (see hosts.allow(5))."
msgstr ""
"تمكين الصلاحية:\n"
"\n"
"- لكل الخدمات التي يتم التحكم بها عن طريق tcp_wrappers (انظر صقحة دليل hosts."
"deny(5) )إذا تم التعيين إلى \"ALL\"،\n"
"\n"
"- الملفات المحلية فقط إذا تم التعيين إلى \"LOCAL\"\n"
"\n"
"- لا شئ إذا تم التعيين إلى \"NONE\".\n"
"\n"
"لتمكين صالحية الخدمات التي تريدها، استخدم ملف /etc/hosts.allow (انظر hosts."
"allow(5))."

#: ../src/msec/help.py:134
msgid ""
"Enable verification of integrity of installed RPM packages. This will notify "
"you if checksums of the installed files were changed, showing separate "
"results for binary and configuration files."
msgstr ""

#: ../src/msec/help.py:136
msgid ""
"Patterns to exclude from disk checks. This parameter is parsed as a regex "
"(7), so you may use complex expressions."
msgstr ""

#: ../src/msec/help.py:138
msgid ""
"Defines the sectool level to use during the periodic security check. You may "
"use the sectool-gui application to select individual tests for each level. "
"If this variable is not defined, the default level defined in sectool "
"configuration will be used."
msgstr ""

#: ../src/msec/help.py:140
#, fuzzy
msgid "Set the root umask."
msgstr "تعيين umask الخاص بالمستخدم الجذر"

#: ../src/msec/help.py:142
msgid "Enforce MSEC settings on system startup"
msgstr ""

#: ../src/msec/help.py:144
msgid "Enable periodic security check results to terminal."
msgstr ""

#: ../src/msec/help.py:146
#, fuzzy
msgid "Accept bogus IPv4 error messages."
msgstr "قبول رسائل خطأ IPv4 الوهمية"

#: ../src/msec/help.py:148
#, fuzzy
msgid "Enable checking for additions/removals of sgid files."
msgstr "تحقق من اضافات/حذف ملفات sgid"

#: ../src/msec/help.py:150
#, fuzzy
msgid "Activate ethernet cards promiscuity check."
msgstr "تنشيط/تعطيل التحقّق من وضع عدم شرعيّة بطاقات ethernet."

#: ../src/msec/libmsec.py:265
msgid "%s modified so launched command: %s"
msgstr ""

#: ../src/msec/libmsec.py:274
msgid "%s modified so should have run command: %s"
msgstr ""

#: ../src/msec/libmsec.py:376 ../src/msec/libmsec.py:408
#, fuzzy
msgid "deleted %s"
msgstr "حذف"

#: ../src/msec/libmsec.py:394
#, fuzzy
msgid "touched file %s"
msgstr "لا ملف كذلك"

#: ../src/msec/libmsec.py:414
#, fuzzy
msgid "made symbolic link from %s to %s"
msgstr "جاري التغيير من ext2 إلى ext3"

#: ../src/msec/libmsec.py:417
msgid "moved file %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:467 ../src/msec/libmsec.py:483
msgid "set variable %s to %s in %s"
msgstr ""

#: ../src/msec/libmsec.py:685
msgid "Error loading plugin '%s' from %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:702
msgid "Invalid callback: %s"
msgstr ""

#: ../src/msec/libmsec.py:711
msgid "Plugin %s not found"
msgstr ""

#: ../src/msec/libmsec.py:718
msgid "Not supported function '%s' in '%s'"
msgstr ""

#: ../src/msec/libmsec.py:725 ../src/msec/libmsec.py:855
msgid "In check-only mode, nothing is written back to disk."
msgstr ""

#: ../src/msec/libmsec.py:752
msgid "Invalid parameter for %s: '%s'. Valid parameters: '%s'."
msgstr ""

#: ../src/msec/libmsec.py:785
#, fuzzy
msgid "user name %s not found"
msgstr "اسم المستخدم طويل جداً"

#: ../src/msec/libmsec.py:797
msgid "user name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:809
msgid "group name %s not found"
msgstr ""

#: ../src/msec/libmsec.py:821
msgid "group name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:831
msgid "Unable to check /proc/mounts. Assuming all file systems are local."
msgstr ""

#: ../src/msec/libmsec.py:870
#, fuzzy
msgid "Forcing ownership of %s to %s"
msgstr "جاري التغيير من ext2 إلى ext3"

#: ../src/msec/libmsec.py:874
#, fuzzy
msgid "Error changing user on %s: %s"
msgstr "خطأ في فكّ %s: %s"

#: ../src/msec/libmsec.py:876
msgid "Wrong owner of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:879
#, fuzzy
msgid "Enforcing group on %s to %s"
msgstr "جاري التغيير من ext2 إلى ext3"

#: ../src/msec/libmsec.py:883
#, fuzzy
msgid "Error changing group on %s: %s"
msgstr "خطأ في فكّ %s: %s"

#: ../src/msec/libmsec.py:885
msgid "Wrong group of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:890
msgid "Enforcing permissions on %s to %o"
msgstr ""

#: ../src/msec/libmsec.py:894
msgid "Error changing permissions on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:896
msgid "Wrong permissions of %s: should be %o"
msgstr ""

#: ../src/msec/libmsec.py:900
#, fuzzy
msgid "Enforcing acl on %s"
msgstr "جاري التغيير من ext2 إلى ext3"

#: ../src/msec/libmsec.py:914
msgid "Unable to add filesystem-specific ACL %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:916
#, fuzzy
msgid "Error changing acl on %s: %s"
msgstr "خطأ في فكّ %s: %s"

#: ../src/msec/libmsec.py:918
msgid "Wrong acl of %s"
msgstr ""

#: ../src/msec/libmsec.py:935
msgid "bad permissions for '%s': '%s'"
msgstr ""

#: ../src/msec/libmsec.py:960
msgid "Non local file: \"%s\". Nothing changed."
msgstr ""

#: ../src/msec/libmsec.py:1005
#, fuzzy
msgid "Checking paths: %s"
msgstr "جاري التأكد من %s"

#: ../src/msec/msec.py:87 ../src/msec/msecperms.py:96
#, fuzzy
msgid "Invalid security level '%s'."
msgstr "مستوى الأمن"

#: ../src/msec/msec.py:114 ../src/msec/msecperms.py:121
msgid "Msec: Mandriva Security Center (%s)\n"
msgstr ""

#: ../src/msec/msec.py:115 ../src/msec/msecperms.py:122
msgid "Error: This application must be executed by root!"
msgstr ""

#: ../src/msec/msec.py:116 ../src/msec/msecperms.py:123
msgid "Run with --help to get help."
msgstr ""

#: ../src/msec/msec.py:142
msgid "Level '%s' not found, aborting."
msgstr ""

#: ../src/msec/msec.py:144
#, fuzzy
msgid "Switching to '%s' level."
msgstr "جاري التغيير من ext2 إلى ext3"

#: ../src/msec/msec.py:151
msgid "No custom file permissions for level '%s'."
msgstr ""

#: ../src/msec/msec.py:152
#, fuzzy
msgid "Saving file permissions to '%s' level."
msgstr "جاري التغيير من ext2 إلى ext3"

#: ../src/msec/msec.py:192 ../src/msec/msecperms.py:166
msgid "Unable to save config!"
msgstr ""

#: ../src/msec/msec.py:194
msgid "Unable to save file system permissions!"
msgstr ""

#: ../src/msec/msecgui.py:55
msgid ""
"<big><b>Choose security level</b></big>\n"
"This application allows you to configure your system security. If you wish\n"
"to activate it, choose the appropriate security level: "
msgstr ""

#: ../src/msec/msecgui.py:61
msgid ""
"This profile configures a reasonably safe set of security features. It is "
"the suggested level for Desktop. If unsure which profile to use, use this "
"one."
msgstr ""

#: ../src/msec/msecgui.py:62
msgid ""
"This profile is focused on netbooks, laptops or low-end devices, which are "
"only accessed by local users and run on batteries."
msgstr ""

#: ../src/msec/msecgui.py:64
msgid ""
"This profile is configured to provide maximum security, even at the cost of "
"limiting the remote access to the system. This level is suggested for "
"security-concerned systems and servers. "
msgstr ""

#: ../src/msec/msecgui.py:66
msgid ""
"This profile is targeted on local network servers, which do not receive "
"accesses from unauthorized Internet users."
msgstr ""

#: ../src/msec/msecgui.py:68
msgid ""
"This profile is provided for servers which are intended to be accessed by "
"unauthorized Internet users."
msgstr ""

#: ../src/msec/msecgui.py:69
msgid ""
"This profile is intended for the users who do not rely on msec to change "
"system settings, and use it for periodic checks only. It configures all "
"periodic checks to run once a day."
msgstr ""

#: ../src/msec/msecgui.py:70
msgid ""
"This profile is similar to the 'audit_daily' profile, but it runs all checks "
"weekly."
msgstr ""

#: ../src/msec/msecgui.py:77
#, fuzzy
msgid "Custom security level."
msgstr "الأمن"

#: ../src/msec/msecgui.py:80
msgid ""
"<big><b>System security options</b></big>\n"
"These options control the local security configuration, such as the login "
"restrictions,\n"
"password configurations, integration with other security tools, and default "
"file creation\n"
"permissions.  "
msgstr ""

#: ../src/msec/msecgui.py:85
msgid ""
"<big><b>Network security options</b></big>\n"
"These options define the network security against remote threats, "
"unauthorized accesses,\n"
"and breakin attempts.  "
msgstr ""

#: ../src/msec/msecgui.py:89
msgid ""
"<big><b>Periodic security checks</b></big>\n"
"These options configure the security checks that should be executed "
"periodically.  "
msgstr ""

#: ../src/msec/msecgui.py:92
msgid ""
"<big><b>Exceptions</b></big>\n"
"Here you can configure the allowed exceptions for msec periodic security\n"
"checks. For each supported test, you may add as many exceptions as you want\n"
"for each check. Note that each exception is parsed as a regexp."
msgstr ""

#: ../src/msec/msecgui.py:97
msgid ""
"<big><b>File permissions</b></big>\n"
"These options allow to fine-tune system permissions for important files and "
"directories.\n"
"The following permissions are checked periodically, and any change to the "
"owner, group,\n"
"or current permission is reported. The permissions can be enforced, "
"automatically\n"
"changing them to the specified values when a change is detected.  "
msgstr ""

#: ../src/msec/msecgui.py:103
#, fuzzy
msgid "Save and apply new configuration?"
msgstr "يرجى الإنتظار... جاري تطبيق التهيئة"

#: ../src/msec/msecgui.py:154
msgid "Unable to load configuration for level '%s'"
msgstr ""

#: ../src/msec/msecgui.py:160
msgid "Unable to load permissions for level '%s'"
msgstr ""

#: ../src/msec/msecgui.py:193
#, fuzzy
msgid "_File"
msgstr "تشيلي"

#: ../src/msec/msecgui.py:195
#, fuzzy
msgid "_Save configuration"
msgstr "إعدادات الصوت"

#: ../src/msec/msecgui.py:200
#, fuzzy
msgid "_Quit"
msgstr "خروج"

#: ../src/msec/msecgui.py:202 ../src/msec/msecgui.py:204
#, fuzzy
msgid "_Help"
msgstr "مساعدة"

#: ../src/msec/msecgui.py:205
#, fuzzy
msgid "_About"
msgstr "حَوْل"

#: ../src/msec/msecgui.py:232
#, fuzzy
msgid "MSEC: System Security and Audit"
msgstr "إعدادات النّظام"

#: ../src/msec/msecgui.py:245
msgid "Overview"
msgstr ""

#: ../src/msec/msecgui.py:246
#, fuzzy
msgid "Security settings"
msgstr "حدد الخيارات"

#: ../src/msec/msecgui.py:255
#, fuzzy
msgid "Basic security"
msgstr "مراقبة أمنية يومية"

#: ../src/msec/msecgui.py:256
#, fuzzy
msgid "System security"
msgstr "الأمن"

#: ../src/msec/msecgui.py:257
#, fuzzy
msgid "Network security"
msgstr "سجلّ إعداد الشبكة "

#: ../src/msec/msecgui.py:258 ../src/msec/msecgui.py:649
#, fuzzy
msgid "Periodic checks"
msgstr "تحقّق دَوْري"

#: ../src/msec/msecgui.py:259
#, fuzzy
msgid "Exceptions"
msgstr "خيارات"

#: ../src/msec/msecgui.py:260 ../src/msec/msecgui.py:1250
msgid "Permissions"
msgstr "التصاريح"

#: ../src/msec/msecgui.py:300
msgid "MSEC option changes"
msgstr ""

#: ../src/msec/msecgui.py:300
#, fuzzy
msgid "option"
msgstr "خيارات"

#: ../src/msec/msecgui.py:301
#, fuzzy
msgid "System permissions changes"
msgstr "خيارات النظام"

#: ../src/msec/msecgui.py:301
#, fuzzy
msgid "permission check"
msgstr "التصاريح"

#: ../src/msec/msecgui.py:311
msgid "changed %s <b>%s</b> (%s -> %s)"
msgstr ""

#: ../src/msec/msecgui.py:316
msgid "added %s <b>%s</b> (%s)"
msgstr ""

#: ../src/msec/msecgui.py:321
msgid "removed %s <b>%s</b>"
msgstr ""

#: ../src/msec/msecgui.py:325
#, fuzzy
msgid "no changes"
msgstr "لا مشاركة"

#: ../src/msec/msecgui.py:338 ../src/msec/msecgui.py:345
#, fuzzy
msgid "Saving changes.."
msgstr "حذف الحزم..."

#: ../src/msec/msecgui.py:341
msgid "Ignore and quit"
msgstr ""

#: ../src/msec/msecgui.py:379
msgid "<b>%s:</b> <i>%s</i>\n"
msgstr ""

#: ../src/msec/msecgui.py:386
msgid "<b>MSEC test run results:</b> <i>%s</i>"
msgstr ""

#: ../src/msec/msecgui.py:394
msgid "Details"
msgstr "تفاصيل"

#: ../src/msec/msecgui.py:400
msgid "MSEC messages (%s): %d"
msgstr ""

#: ../src/msec/msecgui.py:414
msgid "Details (%d changes).."
msgstr ""

#: ../src/msec/msecgui.py:467
msgid "No base msec level specified, using '%s'"
msgstr ""

#: ../src/msec/msecgui.py:470
msgid "Detected base msec level '%s'"
msgstr ""

#: ../src/msec/msecgui.py:498
#, fuzzy
msgid "Security Option"
msgstr "حدد الخيارات"

#: ../src/msec/msecgui.py:508 ../src/msec/msecgui.py:846
#, fuzzy
msgid "Description"
msgstr "حدد الخيارات"

#: ../src/msec/msecgui.py:513
#, fuzzy
msgid "Value"
msgstr "بالاو"

#: ../src/msec/msecgui.py:523
#, fuzzy
msgid "Invalid option '%s'!"
msgstr "الخيارات الأساسية"

#: ../src/msec/msecgui.py:593
msgid "Firewall"
msgstr ""

#: ../src/msec/msecgui.py:600 ../src/msec/msecgui.py:642
msgid "Configure"
msgstr ""

#: ../src/msec/msecgui.py:608
msgid "Updates"
msgstr ""

#: ../src/msec/msecgui.py:614
msgid "Update now"
msgstr ""

#: ../src/msec/msecgui.py:621
#, fuzzy
msgid "Security"
msgstr "تحقّق دَوْري"

#: ../src/msec/msecgui.py:624
msgid "Msec is disabled"
msgstr ""

#: ../src/msec/msecgui.py:627
msgid "Msec is enabled"
msgstr ""

#: ../src/msec/msecgui.py:628
#, fuzzy
msgid "Base security level: '%s'"
msgstr "مستوى الأمن"

#: ../src/msec/msecgui.py:636
msgid "Custom settings: %d"
msgstr ""

#: ../src/msec/msecgui.py:657
msgid "Never"
msgstr ""

#: ../src/msec/msecgui.py:658
msgid "Check: %s. Last run: %s"
msgstr ""

#: ../src/msec/msecgui.py:663
msgid "Show results"
msgstr ""

#: ../src/msec/msecgui.py:669
msgid "Run now"
msgstr ""

#: ../src/msec/msecgui.py:690
msgid "Unable to read log file: %s"
msgstr ""

#: ../src/msec/msecgui.py:691
#, fuzzy
msgid "Periodic check results"
msgstr "تحقّق دَوْري"

#: ../src/msec/msecgui.py:723
msgid ""
"Do you want to run the <b>%s</b> periodic check? Please note that it could "
"take a considerable time to finish."
msgstr ""

#: ../src/msec/msecgui.py:731 ../src/msec/msecgui.py:739
msgid "Please wait, running checks..."
msgstr ""

#: ../src/msec/msecgui.py:742
msgid "Please wait, this might take a few minutes."
msgstr ""

#: ../src/msec/msecgui.py:771
msgid "Periodic check was executed successfully!"
msgstr ""

#: ../src/msec/msecgui.py:774
msgid "An error occurred while running periodic check."
msgstr ""

#: ../src/msec/msecgui.py:806
#, fuzzy
msgid "Enable MSEC tool"
msgstr "تمكين الإقلاع من القرص المدمج؟"

#: ../src/msec/msecgui.py:813
#, fuzzy
msgid "Select the base security level"
msgstr "الرجاء اختيار مستوى الأمن الذي تريده"

#: ../src/msec/msecgui.py:836
msgid "Level name"
msgstr ""

#: ../src/msec/msecgui.py:892
#, fuzzy
msgid "Send security alerts by email to:"
msgstr "تنبيهات أمنية:"

#: ../src/msec/msecgui.py:914
msgid "Display security alerts on desktop"
msgstr ""

#: ../src/msec/msecgui.py:1098
#, fuzzy
msgid "Enable periodic security checks"
msgstr "تمكين اختبارات msec الأمنية كل ساعة"

#: ../src/msec/msecgui.py:1160
#, fuzzy
msgid "Security check"
msgstr "تحقّق دَوْري"

#: ../src/msec/msecgui.py:1166
#, fuzzy
msgid "Exception"
msgstr "خيارات"

#: ../src/msec/msecgui.py:1187 ../src/msec/msecgui.py:1314
#, fuzzy
msgid "Add a rule"
msgstr "إضافة مستخدم"

#: ../src/msec/msecgui.py:1192 ../src/msec/msecgui.py:1319
msgid "Delete"
msgstr "حذف"

#: ../src/msec/msecgui.py:1232
msgid "Path"
msgstr "المسار"

#: ../src/msec/msecgui.py:1238
#, fuzzy
msgid "User"
msgstr "هوية المستخدم"

#: ../src/msec/msecgui.py:1244
#, fuzzy
msgid "Group"
msgstr "هوية المجموعة"

#: ../src/msec/msecgui.py:1258
#, fuzzy
msgid "Enforce"
msgstr "تجاهل"

#: ../src/msec/msecgui.py:1266
msgid "Acl"
msgstr ""

#: ../src/msec/msecgui.py:1419
msgid "Editing exception"
msgstr ""

#: ../src/msec/msecgui.py:1424
msgid "Adding new exception"
msgstr ""

#: ../src/msec/msecgui.py:1431
msgid ""
"Editing exception. Please select the correspondent msec check and exception "
"value\n"
msgstr ""

#: ../src/msec/msecgui.py:1438
msgid "Check: "
msgstr ""

#: ../src/msec/msecgui.py:1453
msgid "Exception: "
msgstr ""

#: ../src/msec/msecgui.py:1489
msgid "Changing permissions for %s"
msgstr ""

#: ../src/msec/msecgui.py:1497
msgid "Adding new permission check"
msgstr ""

#: ../src/msec/msecgui.py:1509
msgid "Changing permissions on <b>%s</b>"
msgstr ""

#: ../src/msec/msecgui.py:1509
msgid "new file"
msgstr ""

#: ../src/msec/msecgui.py:1521
#, fuzzy
msgid "File: "
msgstr "/_ملف"

#: ../src/msec/msecgui.py:1530
msgid ""
"Please specify new file owner and permissions, or use 'current' to keep "
"current settings."
msgstr ""

#: ../src/msec/msecgui.py:1537
#, fuzzy
msgid "User: "
msgstr "هوية المستخدم"

#: ../src/msec/msecgui.py:1548
#, fuzzy
msgid "Group: "
msgstr "هوية المجموعة"

#: ../src/msec/msecgui.py:1559
#, fuzzy
msgid "Permissions: "
msgstr "التصاريح"

#: ../src/msec/msecgui.py:1568
msgid ""
"To enforce additional ACL (Access Control List) on file, specify them in the "
"following format:\n"
"user1:acl,user2:acl\n"
"Refer to 'man setfacl' for details."
msgstr ""

#: ../src/msec/msecgui.py:1575
msgid "ACL: "
msgstr ""

#: ../src/msec/msecgui.py:1642
#, fuzzy
msgid "Select new value for %s"
msgstr "اختيار ملفّ البرمجيات المضمنة لـ%s"

#: ../src/msec/msecgui.py:1651
msgid ""
"<i>%s</i>\n"
"\n"
"\tCurrent value:\t\t\t<i>%s</i>\n"
"\t%sDefault level value:\t<i>%s</i>%s\n"
msgstr ""

#: ../src/msec/msecgui.py:1661
#, fuzzy
msgid "New value:"
msgstr "نيوكاليدونيا"

#: ../src/msec/plugins/log.py:45
#, fuzzy
msgid "Invalid retention period: \"%s\""
msgstr "انتهاء وقت shell"

#: ../src/msec/plugins/log.py:53
msgid "Setting log retention period to %d weeks"
msgstr ""

#: ../src/msec/plugins/msec.py:150
msgid "Allowing unrestricted chkconfig for packages"
msgstr ""

#: ../src/msec/plugins/msec.py:155
msgid "Restricting chkconfig for packages according to \"%s\" profile"
msgstr ""

#: ../src/msec/plugins/msec.py:165
#, fuzzy
msgid "Setting root umask to %s"
msgstr "جاري التغيير من ext2 إلى ext3"

#: ../src/msec/plugins/msec.py:175
#, fuzzy
msgid "Setting users umask to %s"
msgstr "جاري التغيير من ext2 إلى ext3"

#: ../src/msec/plugins/msec.py:196
msgid "Allowing users to connect X server from everywhere"
msgstr ""

#: ../src/msec/plugins/msec.py:199
msgid "Allowing users to connect X server from localhost"
msgstr ""

#: ../src/msec/plugins/msec.py:202
msgid "Restricting X server connection to the console user"
msgstr ""

#: ../src/msec/plugins/msec.py:205
msgid "invalid allow_x_connections arg: %s"
msgstr ""

#: ../src/msec/plugins/msec.py:228
#, fuzzy
msgid "Allowing the X server to listen to tcp connections"
msgstr "السماح باتّصالات نافذة X"

#: ../src/msec/plugins/msec.py:239
msgid "Forbidding the X server to listen to tcp connection"
msgstr ""

#: ../src/msec/plugins/msec.py:255
#, fuzzy
msgid "Invalid shell timeout \"%s\""
msgstr "انتهاء وقت shell"

#: ../src/msec/plugins/msec.py:263
#, fuzzy
msgid "Setting shell timeout to %s"
msgstr "انتهاء وقت shell"

#: ../src/msec/plugins/msec.py:271
#, fuzzy
msgid "Invalid shell history size \"%s\""
msgstr "حجم سجلّ shell"

#: ../src/msec/plugins/msec.py:282
#, fuzzy
msgid "Setting shell history size to %s"
msgstr "حجم سجلّ shell"

#: ../src/msec/plugins/msec.py:286
#, fuzzy
msgid "Removing limit on shell history size"
msgstr "حجم سجلّ shell"

#: ../src/msec/plugins/msec.py:295
#, fuzzy
msgid "Invalid file system umask \"%s\""
msgstr "انتهاء وقت shell"

#: ../src/msec/plugins/msec.py:331
#, fuzzy
msgid "Allowing reboot and shutdown to the console user"
msgstr "سماح/منع إعادة التّشغيل بواسطة مستخدم الشّاشة الطّرفيّة."

#: ../src/msec/plugins/msec.py:338
#, fuzzy
msgid "Allowing SysRq key to the console user"
msgstr "سماح/منع إعادة التّشغيل بواسطة مستخدم الشّاشة الطّرفيّة."

#: ../src/msec/plugins/msec.py:341
msgid "Allowing Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:350
msgid "Allowing Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:353
msgid "Allowing Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/plugins/msec.py:357
#, fuzzy
msgid "Forbidding reboot and shutdown to the console user"
msgstr "سماح/منع إعادة التّشغيل بواسطة مستخدم الشّاشة الطّرفيّة."

#: ../src/msec/plugins/msec.py:365
#, fuzzy
msgid "Forbidding SysRq key to the console user"
msgstr "إعادة الإقلاع بطرفية المستخدم"

#: ../src/msec/plugins/msec.py:368
msgid "Forbidding Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:377
msgid "Forbidding Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:380
msgid "Forbidding Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/plugins/msec.py:395
msgid "Allowing list of users in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:402
msgid "Allowing list of users in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:407
msgid "Forbidding list of users in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:414
msgid "Forbidding list of users in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:425
#, fuzzy
msgid "Allowing autologin"
msgstr "سماح/منع الدخول التلقائي"

#: ../src/msec/plugins/msec.py:428
#, fuzzy
msgid "Forbidding autologin"
msgstr "سماح/منع الدخول التلقائي"

#: ../src/msec/plugins/msec.py:433
msgid "Activating password in boot loader"
msgstr ""

#: ../src/msec/plugins/msec.py:447
#, fuzzy
msgid "Removing password in boot loader"
msgstr "بدون تحديد عُمْر لكلمة المرور لـ"

#: ../src/msec/plugins/msec.py:462
#, fuzzy
msgid "Enabling log on console"
msgstr "تمكين/تعطيل تقارير syslog إلى الشّاشة الطّرفيّة 12"

#: ../src/msec/plugins/msec.py:466
#, fuzzy
msgid "Disabling log on console"
msgstr "إظهار الشعار في سطر الأوامر"

#: ../src/msec/plugins/msec.py:483
msgid "Authorizing all services"
msgstr ""

#: ../src/msec/plugins/msec.py:487
msgid "Disabling all services"
msgstr ""

#: ../src/msec/plugins/msec.py:491
#, fuzzy
msgid "Disabling non local services"
msgstr "مشاركة الماسحات الضوئية المحلية"

#: ../src/msec/plugins/msec.py:503
#, fuzzy
msgid "Enabling sulogin in single user runlevel"
msgstr "تمكين/تعطيل sulogin(8) في مستوى المستخدم الفردي."

#: ../src/msec/plugins/msec.py:507
#, fuzzy
msgid "Disabling sulogin in single user runlevel"
msgstr "تمكين/تعطيل sulogin(8) في مستوى المستخدم الفردي."

#: ../src/msec/plugins/msec.py:518
#, fuzzy
msgid "Enabling msec periodic runs"
msgstr "جاري تمكين تجزيء التبديل %s"

#: ../src/msec/plugins/msec.py:522
msgid "Disabling msec periodic runs"
msgstr ""

#: ../src/msec/plugins/msec.py:535
#, fuzzy
msgid "Enabling crontab and at"
msgstr "تمكين \"crontab\" و \"at\" للمستخدمين"

#: ../src/msec/plugins/msec.py:542
#, fuzzy
msgid "Disabling crontab and at"
msgstr "تمكين \"crontab\" و \"at\" للمستخدمين"

#: ../src/msec/plugins/msec.py:554
msgid "Allowing export display from root"
msgstr ""

#: ../src/msec/plugins/msec.py:558
msgid "Forbidding export display from root"
msgstr ""

#: ../src/msec/plugins/msec.py:585
#, fuzzy
msgid "Allowing direct root login"
msgstr "سماح/منع دخول المسخدم root المباشر."

#: ../src/msec/plugins/msec.py:608
#, fuzzy
msgid "Forbidding direct root login"
msgstr "سماح/منع دخول المسخدم root المباشر."

#: ../src/msec/plugins/msec.py:630
msgid "Using secure location for temporary files"
msgstr ""

#: ../src/msec/plugins/msec.py:632
msgid "Not using secure location for temporary files"
msgstr ""

#: ../src/msec/plugins/msec.py:652
msgid "Allowing including current directory in path"
msgstr ""

#: ../src/msec/plugins/msec.py:655
msgid "Not allowing including current directory in path"
msgstr ""

#: ../src/msec/plugins/network.py:134
#, fuzzy
msgid "Allowing remote root login"
msgstr "السماح بدخول المستخدم الجذر من بعيد"

#: ../src/msec/plugins/network.py:138
#, fuzzy
msgid "Forbidding remote root login"
msgstr "سماح/منع دخول المستخدم الجذر من بعيد."

#: ../src/msec/plugins/network.py:142
#, fuzzy
msgid "Allowing remote root login only by passphrase"
msgstr "السماح بدخول المستخدم الجذر من بعيد"

#: ../src/msec/plugins/network.py:175
#, fuzzy
msgid "Enabling name resolution spoofing protection"
msgstr "الحماية من خداع حلّ الاسم"

#: ../src/msec/plugins/network.py:180
#, fuzzy
msgid "Disabling name resolution spoofing protection"
msgstr "الحماية من خداع حلّ الاسم"

#: ../src/msec/plugins/pam.py:68
#, fuzzy
msgid "Using password to authenticate users"
msgstr "استخدم كلمة المرور للمصادقة على المستخدمين"

#: ../src/msec/plugins/pam.py:72
#, fuzzy
msgid "Don't use password to authenticate users"
msgstr "استخدم كلمة المرور للمصادقة على المستخدمين"

#: ../src/msec/plugins/pam.py:83
msgid "Password history not supported with pam_tcb."
msgstr ""

#: ../src/msec/plugins/pam.py:91
#, fuzzy
msgid "Invalid maximum password history length: \"%s\""
msgstr "سجلّ طول كلمة المرور"

#: ../src/msec/plugins/pam.py:106
#, fuzzy
msgid "Setting password history to %d."
msgstr "سجلّ طول كلمة المرور"

#: ../src/msec/plugins/pam.py:112
#, fuzzy
msgid "Disabling password history"
msgstr "سجلّ طول كلمة المرور"

#: ../src/msec/plugins/pam.py:124
msgid ""
"Invalid password length \"%s\". Use \"length,ndigits,nupper\" as parameter"
msgstr ""

#: ../src/msec/plugins/pam.py:145
msgid "Setting minimum password length %d"
msgstr ""

#: ../src/msec/plugins/pam.py:169
#, fuzzy
msgid "Allowing su only from wheel group members"
msgstr "تمكين استخدام su من قبل أعضاء مجموعة العجل أو لأيّ مستخدم"

#: ../src/msec/plugins/pam.py:173
msgid "no wheel group"
msgstr ""

#: ../src/msec/plugins/pam.py:177
msgid ""
"Security configuration is defined to allow only members of the wheel group "
"to su to root, but this group is empty. Please add the allowed users into "
"the wheel group."
msgstr ""

#: ../src/msec/plugins/pam.py:185
msgid "Allowing su for all"
msgstr ""

#: ../src/msec/plugins/pam.py:204
msgid "Allowing transparent root access for wheel group members"
msgstr ""

#: ../src/msec/plugins/pam.py:211
#, fuzzy
msgid "Disabling transparent root access for wheel group members"
msgstr "تمكين استخدام su من قبل أعضاء مجموعة العجل أو لأيّ مستخدم"

#: ../src/msec/plugins/sudo.py:49
#, fuzzy
msgid "Allowing users in wheel group to use sudo"
msgstr "تمكين استخدام su من قبل أعضاء مجموعة العجل أو لأيّ مستخدم"

#: ../src/msec/plugins/sudo.py:54
msgid "Allowing users in wheel group to use sudo without password"
msgstr ""

#: ../src/msec/plugins/sudo.py:57
#, fuzzy
msgid "Not allowing users in wheel group to use sudo"
msgstr "تمكين استخدام su من قبل أعضاء مجموعة العجل أو لأيّ مستخدم"

#: ../src/msec/tools.py:33
msgid "Unable to parse firewall configuration: %s"
msgstr ""

#: ../src/msec/tools.py:38
msgid "Enabled, with %d rules"
msgstr ""

#: ../src/msec/tools.py:48
msgid "Last updated: %s"
msgstr ""

#: ../src/msec/tools.py:50
msgid "Unable to access %s: %s"
msgstr ""

#: ../src/msec/tools.py:51
msgid "Unable to determine update status"
msgstr ""

# File: ../cron-sh/security.sh, line: 15
#, sh-format
msgid "Error: base level $BASE_LEVEL not found"
msgstr ""

#
# File: ../cron-sh/security.sh, line: 21
#, sh-format
msgid "/etc/security/msec/security.conf don't exist."
msgstr ""

#
# File: ../cron-sh/security.sh, line: 92
#, sh-format
msgid "MSEC: audit script $script failed"
msgstr ""

#
# File: ../cron-sh/security.sh, line: 127
#, sh-format
msgid ""
"MSEC has performed Security Check on ${REPORT_HOSTNAME} on ${REPORT_DATE}. "
"Detailed results are available in ${MAIL_LOG_TODAY}"
msgstr ""

#
# File: ../cron-sh/security.sh, line: 138
#, sh-format
msgid ""
"MSEC has performed Diff Check on ${REPORT_HOSTNAME} on ${REPORT_DATE}. "
"Changes in system security were detected and are available in "
"${SECURITY_LOG}."
msgstr ""

#~ msgid "Standard"
#~ msgstr "قياسي"

#, fuzzy
#~ msgid "Secure"
#~ msgstr "الأمن"

#, fuzzy
#~ msgid "System administrator email address:"
#~ msgstr "ضع كلمة مرور المستخدم الجذر"

#, fuzzy
#~ msgid "_Cancel"
#~ msgstr "إلغاء"

#, fuzzy
#~ msgid "_Ignore"
#~ msgstr "تجاهل"

#, fuzzy
#~ msgid "_Save"
#~ msgstr "حفظ"

#, fuzzy
#~ msgid "Do you want to save changes before closing?"
#~ msgstr "هل تريد حفظ تعديلات /etc/fstab"

#, fuzzy
#~ msgid "'%s' is not available in this version"
#~ msgstr "الـ%s غير مدعوم من قبل هذا الإصدار من %s."

#, fuzzy
#~ msgid "Activating daily security check"
#~ msgstr "تمكين/تعطيل التحقّق اليومي من الأمن."

#, fuzzy
#~ msgid "Disabling daily security check"
#~ msgstr "مراقبة أمنية يومية"

#, fuzzy
#~ msgid "Activating periodic promiscuity check"
#~ msgstr "تنشيط/تعطيل التحقّق من وضع عدم شرعيّة بطاقات ethernet."

#, fuzzy
#~ msgid "Disabling periodic promiscuity check"
#~ msgstr "التحقّق من عدم شرعيّة بطاقات ethernet"

#, fuzzy
#~ msgid "_Import configuration"
#~ msgstr "إعدادات الصوت"

#, fuzzy
#~ msgid "_Export configuration"
#~ msgstr "إعدادات الصوت"

#, fuzzy
#~ msgid "Save and apply current policy"
#~ msgstr "يرجى الإنتظار... جاري تطبيق التهيئة"

#, fuzzy
#~ msgid "Quit"
#~ msgstr "خروج"