# translation of DrakX-af21-09.po to Afrikaans
# translation of DrakX-af.po to Afrikaans
# KTranslator Generated File
# KTranslator Generated File
# Copyright (C) 2000,2003, 2004 Free Software Foundation, Inc.
# Schalk W. Cronjé <schalkc@ntaba.co.za>, 2000.
# Dirk van der Walt <mandrake@webmail.co.za>, 2003.
# Dirk van der Walt <dirkvanderwalt@webmail.co.za>, 2004.
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX-af\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-02-05 12:43+BRST\n"
"PO-Revision-Date: 2005-04-21 17:33+0200\n"
"Last-Translator: Dirk van der Walt <dirkvanderwalt@webmail.co.za>\n"
"Language-Team: Afrikaans\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.0.2\n"

#: ../src/msec/help.py:15
msgid "Enable name resolution spoofing protection."
msgstr ""

#: ../src/msec/help.py:17
msgid "Send mail reports even if no changes were detected."
msgstr ""

#: ../src/msec/help.py:19
msgid "Accept broadcasted ICMP echo."
msgstr ""

#: ../src/msec/help.py:21
msgid ""
"Allow users to authenticate with their passwords for sudo. If this parameter "
"is set to 'wheel', users must belong to the 'wheel' group to be able to use "
"sudo"
msgstr ""

#: ../src/msec/help.py:23
msgid "Allow X server to accept connections from network on tcp port 6000."
msgstr ""

#: ../src/msec/help.py:25
msgid "Enable checking for known rootkits using chkrootkit."
msgstr ""

#: ../src/msec/help.py:27
msgid "Enable checking for additions/removals of suid root files."
msgstr ""

#: ../src/msec/help.py:29
msgid ""
"Enable crontab and at for users. Put allowed users in /etc/cron.allow and /"
"etc/at.allow (see man at(1) and crontab(1))."
msgstr ""

#: ../src/msec/help.py:31
#, fuzzy
msgid "Accept bogus IPv4 error messages."
msgstr "Aanvaar snert IPv4 foutboodskappe"

#: ../src/msec/help.py:33
msgid "Enable checksum verification for suid files."
msgstr ""

#: ../src/msec/help.py:35
msgid "User email to receive security notifications."
msgstr ""

#: ../src/msec/help.py:37
#, fuzzy
msgid "Allow autologin."
msgstr "Laat toe/Verbied outo-inteken."

#: ../src/msec/help.py:39
msgid "Allow only users in wheel grup to su to root."
msgstr ""

#: ../src/msec/help.py:41
msgid ""
"Creates the symlink /etc/security/msec/server to point to /etc/security/msec/"
"server.SERVER_LEVEL. The /etc/security/msec/server is used by chkconfig --"
"add to decide to add a service if it is present in the file during the "
"installation of packages."
msgstr ""

#: ../src/msec/help.py:43
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr "Voorsien die tydsbeperking van die dop. Indien geen, maak dit Zero"

#: ../src/msec/help.py:45
msgid ""
"Enable permission checking on users' files that should not be owned by "
"someone else, or writable."
msgstr ""

#: ../src/msec/help.py:47
msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))."
msgstr ""

#: ../src/msec/help.py:49
msgid ""
"Use password to authenticate users. Take EXTREMELY care when disabling "
"passwords, as it will leave the machine vulnerable."
msgstr ""

#: ../src/msec/help.py:51
msgid ""
"Set umask option for mounting vfat and ntfs partitions. If umask is '0', "
"default system umask is used."
msgstr ""

#: ../src/msec/help.py:53
msgid "Enable checking for open network ports."
msgstr ""

#: ../src/msec/help.py:55
msgid "Enable logging of strange network packets."
msgstr ""

#: ../src/msec/help.py:57
msgid "Enable verification of installed RPM packages."
msgstr ""

#: ../src/msec/help.py:59
msgid "Allow root access without password for the members of the wheel group."
msgstr ""

#: ../src/msec/help.py:61
msgid "Send security check results by email."
msgstr ""

#: ../src/msec/help.py:63
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters, using length,ndigits,nupper format."
msgstr ""

#: ../src/msec/help.py:65
msgid "Set the root umask."
msgstr ""

#: ../src/msec/help.py:67
msgid "Enable checking for additions/removals of sgid files."
msgstr ""

#: ../src/msec/help.py:69
#, fuzzy
msgid "Activate ethernet cards promiscuity check."
msgstr "Aktiveer/Versper ethernetkaarte 'promoscuity' toets."

#: ../src/msec/help.py:71
msgid "Enable AppArmor security framework on boot"
msgstr ""

#: ../src/msec/help.py:73
msgid ""
"Allow local users to connect to X server. Accepted arguments: yes (all "
"connections are allowed), local (only local connection), no (no connection)."
msgstr ""

#: ../src/msec/help.py:75
msgid "Enable checking for files/directories writable by everybody."
msgstr ""

#: ../src/msec/help.py:77
msgid "Log syslog messages on console terminal 12."
msgstr ""

#: ../src/msec/help.py:79
#, fuzzy
msgid "Enable IP spoofing protection."
msgstr "Ontsper flous-naamresolusie-beskerming"

#: ../src/msec/help.py:81
msgid ""
"Defines the base security level, on top of which the current configuration "
"is based."
msgstr ""

#: ../src/msec/help.py:83
msgid "Enable periodic permission checking for system files."
msgstr ""

#: ../src/msec/help.py:85
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr "Stel instruksiedop se geskiedenisgrootte. '-1' beteken oneindig groot."

#: ../src/msec/help.py:87
msgid "Allow system reboot and shutdown to local users."
msgstr ""

#: ../src/msec/help.py:89
msgid "Enables logging of periodic checks to system log."
msgstr ""

#: ../src/msec/help.py:91
msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
msgstr ""

#: ../src/msec/help.py:93
msgid ""
"Enable password-related checks, such as empty passwords and strange super-"
"user accounts."
msgstr ""

#: ../src/msec/help.py:95
msgid ""
"Set the password history length to prevent password reuse. This is not "
"supported by pam_tcb."
msgstr ""

#: ../src/msec/help.py:97
msgid "Enable daily security checks."
msgstr ""

#: ../src/msec/help.py:99
msgid "Allow direct root login on terminal."
msgstr ""

#: ../src/msec/help.py:101
msgid "Enable checking for unowned files."
msgstr ""

#: ../src/msec/help.py:103
msgid "Allow display managers (kdm and gdm) to display list of local users."
msgstr ""

#: ../src/msec/help.py:105
msgid "Show security notifications in system tray using libnotify."
msgstr ""

#: ../src/msec/help.py:107
msgid ""
"Allow remote root login via sshd. If yes, login is allowed. If without-"
"password, only public-key authentication logins are allowed. See sshd_config"
"(5) man page for more information."
msgstr ""

#: ../src/msec/help.py:109
msgid "Perform hourly security check for changes in system configuration."
msgstr ""

#: ../src/msec/help.py:111
msgid "Ask for root password when going to single user level (man sulogin(8))."
msgstr ""

#: ../src/msec/help.py:113
msgid ""
"Allow to export display when passing from the root account to the other "
"users. See pam_xauth(8) for more details."
msgstr ""

#: ../src/msec/help.py:115
msgid "Set the user umask."
msgstr ""

#: ../src/msec/help.py:117
msgid "Accept ICMP echo."
msgstr ""

#: ../src/msec/help.py:119
msgid ""
"Allow full access to network services controlled by tcp_wrapper (see hosts."
"deny(5)). If yes, all services are allowed. If local, only connections to "
"local services are authorized. If no, the services must be authorized "
"manually in /etc/hosts.allow (see hosts.allow(5))."
msgstr ""

#: ../src/msec/help.py:121
msgid "Enable periodic security check results to terminal."
msgstr ""

#: ../src/msec/help.py:123
msgid "Enable PolicyKit security framework"
msgstr ""

#: ../src/msec/libmsec.py:322
msgid "%s modified so launched command: %s"
msgstr ""

#: ../src/msec/libmsec.py:331
msgid "%s modified so should have run command: %s"
msgstr ""

#: ../src/msec/libmsec.py:433 ../src/msec/libmsec.py:465
msgid "deleted %s"
msgstr ""

#: ../src/msec/libmsec.py:451
msgid "touched file %s"
msgstr ""

#: ../src/msec/libmsec.py:471
msgid "made symbolic link from %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:474
msgid "moved file %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:524 ../src/msec/libmsec.py:540
msgid "set variable %s to %s in %s"
msgstr ""

#: ../src/msec/libmsec.py:741
msgid "Invalid callback: %s"
msgstr ""

#: ../src/msec/libmsec.py:751
msgid "Plugin %s not found"
msgstr ""

#: ../src/msec/libmsec.py:758
msgid "Not supported function '%s' in '%s'"
msgstr ""

#: ../src/msec/libmsec.py:765 ../src/msec/libmsec.py:1705
msgid "In check-only mode, nothing is written back to disk."
msgstr ""

#: ../src/msec/libmsec.py:782
msgid "'%s' is not available in this version"
msgstr ""

#: ../src/msec/libmsec.py:792
msgid "Invalid parameter for %s: '%s'. Valid parameters: '%s'."
msgstr ""

#: ../src/msec/libmsec.py:807
msgid "Allowing unrestricted chkconfig for packages"
msgstr ""

#: ../src/msec/libmsec.py:812
msgid "Restricting chkconfig for packages according to \"%s\" profile"
msgstr ""

#: ../src/msec/libmsec.py:822
msgid "Setting root umask to %s"
msgstr ""

#: ../src/msec/libmsec.py:832
msgid "Setting users umask to %s"
msgstr ""

#: ../src/msec/libmsec.py:853
msgid "Allowing users to connect X server from everywhere"
msgstr ""

#: ../src/msec/libmsec.py:856
msgid "Allowing users to connect X server from localhost"
msgstr ""

#: ../src/msec/libmsec.py:859
msgid "Restricting X server connection to the console user"
msgstr ""

#: ../src/msec/libmsec.py:862
msgid "invalid allow_x_connections arg: %s"
msgstr ""

#: ../src/msec/libmsec.py:885
msgid "Allowing the X server to listen to tcp connections"
msgstr ""

#: ../src/msec/libmsec.py:896
msgid "Forbidding the X server to listen to tcp connection"
msgstr ""

#: ../src/msec/libmsec.py:912
msgid "Invalid shell timeout \"%s\""
msgstr ""

#: ../src/msec/libmsec.py:920
msgid "Setting shell timeout to %s"
msgstr ""

#: ../src/msec/libmsec.py:928
msgid "Invalid shell history size \"%s\""
msgstr ""

#: ../src/msec/libmsec.py:939
msgid "Setting shell history size to %s"
msgstr ""

#: ../src/msec/libmsec.py:943
msgid "Removing limit on shell history size"
msgstr ""

#: ../src/msec/libmsec.py:982
msgid "Allowing reboot and shutdown to the console user"
msgstr ""

#: ../src/msec/libmsec.py:989
msgid "Allowing SysRq key to the console user"
msgstr ""

#: ../src/msec/libmsec.py:992
msgid "Allowing Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/libmsec.py:996
msgid "Allowing Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/libmsec.py:999
msgid "Allowing Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/libmsec.py:1003
msgid "Forbidding reboot and shutdown to the console user"
msgstr ""

#: ../src/msec/libmsec.py:1011
msgid "Forbidding SysRq key to the console user"
msgstr ""

#: ../src/msec/libmsec.py:1014
msgid "Forbidding Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/libmsec.py:1018
msgid "Forbidding Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/libmsec.py:1021
msgid "Forbidding Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/libmsec.py:1035
msgid "Allowing list of users in KDM"
msgstr ""

#: ../src/msec/libmsec.py:1039
msgid "Allowing list of users in GDM"
msgstr ""

#: ../src/msec/libmsec.py:1044
msgid "Forbidding list of users in KDM"
msgstr ""

#: ../src/msec/libmsec.py:1048
msgid "Forbidding list of users in GDM"
msgstr ""

#: ../src/msec/libmsec.py:1074
msgid "Allowing direct root login"
msgstr ""

#: ../src/msec/libmsec.py:1091
msgid "Forbidding direct root login"
msgstr ""

#: ../src/msec/libmsec.py:1115
msgid "Allowing remote root login"
msgstr ""

#: ../src/msec/libmsec.py:1119
msgid "Forbidding remote root login"
msgstr ""

#: ../src/msec/libmsec.py:1123
msgid "Allowing remote root login only by passphrase"
msgstr ""

#: ../src/msec/libmsec.py:1135
msgid "Allowing su only from wheel group members"
msgstr ""

#: ../src/msec/libmsec.py:1139
msgid "no wheel group"
msgstr ""

#: ../src/msec/libmsec.py:1143
msgid "wheel group is empty"
msgstr ""

#: ../src/msec/libmsec.py:1151
msgid "Allowing su for all"
msgstr ""

#: ../src/msec/libmsec.py:1170
msgid "Allowing transparent root access for wheel group members"
msgstr ""

#: ../src/msec/libmsec.py:1178
msgid "Disabling transparent root access for wheel group members"
msgstr ""

#: ../src/msec/libmsec.py:1192
msgid "Allowing autologin"
msgstr ""

#: ../src/msec/libmsec.py:1195
msgid "Forbidding autologin"
msgstr ""

#: ../src/msec/libmsec.py:1200
msgid "Activating password in boot loader"
msgstr ""

#: ../src/msec/libmsec.py:1214
msgid "Removing password in boot loader"
msgstr ""

#: ../src/msec/libmsec.py:1229
msgid "Enabling log on console"
msgstr ""

#: ../src/msec/libmsec.py:1233
msgid "Disabling log on console"
msgstr ""

#: ../src/msec/libmsec.py:1245
msgid "Activating daily security check"
msgstr ""

#: ../src/msec/libmsec.py:1249
msgid "Disabling daily security check"
msgstr ""

#: ../src/msec/libmsec.py:1266
msgid "Authorizing all services"
msgstr ""

#: ../src/msec/libmsec.py:1270
msgid "Disabling all services"
msgstr ""

#: ../src/msec/libmsec.py:1274
msgid "Disabling non local services"
msgstr ""

#: ../src/msec/libmsec.py:1307
msgid "Enabling name resolution spoofing protection"
msgstr ""

#: ../src/msec/libmsec.py:1312
msgid "Disabling name resolution spoofing protection"
msgstr ""

#: ../src/msec/libmsec.py:1341
msgid ""
"Invalid password length \"%s\". Use \"length,ndigits,nupper\" as parameter"
msgstr ""

#: ../src/msec/libmsec.py:1362
msgid "Setting minimum password length %d"
msgstr ""

#: ../src/msec/libmsec.py:1386
msgid "Using password to authenticate users"
msgstr ""

#: ../src/msec/libmsec.py:1390
msgid "Don't use password to authenticate users"
msgstr ""

#: ../src/msec/libmsec.py:1401
msgid "Password history not supported with pam_tcb."
msgstr ""

#: ../src/msec/libmsec.py:1409
msgid "Invalid maximum password history length: \"%s\""
msgstr ""

#: ../src/msec/libmsec.py:1424
msgid "Setting password history to %d."
msgstr ""

#: ../src/msec/libmsec.py:1430
msgid "Disabling password history"
msgstr ""

#: ../src/msec/libmsec.py:1441
msgid "Enabling sulogin in single user runlevel"
msgstr ""

#: ../src/msec/libmsec.py:1445
msgid "Disabling sulogin in single user runlevel"
msgstr ""

#: ../src/msec/libmsec.py:1456
msgid "Enabling msec periodic runs"
msgstr ""

#: ../src/msec/libmsec.py:1460
msgid "Disabling msec periodic runs"
msgstr ""

#: ../src/msec/libmsec.py:1473
msgid "Enabling crontab and at"
msgstr ""

#: ../src/msec/libmsec.py:1480
msgid "Disabling crontab and at"
msgstr ""

#: ../src/msec/libmsec.py:1492
msgid "Allowing export display from root"
msgstr ""

#: ../src/msec/libmsec.py:1496
msgid "Forbidding export display from root"
msgstr ""

#: ../src/msec/libmsec.py:1507
msgid "Activating periodic promiscuity check"
msgstr ""

#: ../src/msec/libmsec.py:1511
msgid "Disabling periodic promiscuity check"
msgstr ""

#: ../src/msec/libmsec.py:1635
msgid "user name %s not found"
msgstr ""

#: ../src/msec/libmsec.py:1647
msgid "user name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:1659
msgid "group name %s not found"
msgstr ""

#: ../src/msec/libmsec.py:1671
msgid "group name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:1681
msgid "Unable to check /proc/mounts. Assuming all file systems are local."
msgstr ""

#: ../src/msec/libmsec.py:1720
msgid "Enforcing user on %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:1724
msgid "Error changing user on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:1726
msgid "Wrong owner of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:1729
msgid "Enforcing group on %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:1733
msgid "Error changing group on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:1735
msgid "Wrong group of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:1740
msgid "Enforcing permissions on %s to %o"
msgstr ""

#: ../src/msec/libmsec.py:1744
msgid "Error changing permissions on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:1746
msgid "Wrong permissions of %s: should be %o"
msgstr ""

#: ../src/msec/libmsec.py:1763
msgid "bad permissions for '%s': '%s'"
msgstr ""

#: ../src/msec/libmsec.py:1788
msgid "Non local file: \"%s\". Nothing changed."
msgstr ""

#: ../src/msec/libmsec.py:1830
msgid "Checking paths: %s"
msgstr ""

#: ../src/msec/msec.py:84 ../src/msec/msecperms.py:95
msgid "Invalid security level '%s'."
msgstr ""

#: ../src/msec/msec.py:105 ../src/msec/msecperms.py:119
msgid "Msec: Mandriva Security Center (%s)\n"
msgstr ""

#: ../src/msec/msec.py:106 ../src/msec/msecperms.py:120
msgid "Error: This application must be executed by root!"
msgstr ""

#: ../src/msec/msec.py:107 ../src/msec/msecperms.py:121
msgid "Run with --help to get help."
msgstr ""

#: ../src/msec/msec.py:129 ../src/msec/msecperms.py:142
msgid "Level '%s' not found, aborting."
msgstr ""

#: ../src/msec/msec.py:131 ../src/msec/msecperms.py:144
msgid "Switching to '%s' level."
msgstr ""

#: ../src/msec/msec.py:147 ../src/msec/msecperms.py:161
msgid "Unable to save config!"
msgstr ""

#: ../src/msec/msecgui.py:49
msgid ""
"<big><b>Choose security level</b></big>\n"
"\n"
"This application allows you to configure your system security. If you wish\n"
"to activate it, choose the appropriate security level:\n"
msgstr ""

#: ../src/msec/msecgui.py:55
msgid ""
"This profile configures a reasonably safe set of security features. It "
"activates several non-intrusive periodic system checks. This is the "
"suggested level for Desktop."
msgstr ""

#: ../src/msec/msecgui.py:57
msgid ""
"This profile is configured to provide maximum security, even at the cost of "
"limiting the remote access to the system. It also runs a wider set of "
"periodic checks, enforces the local password settings, and periodically "
"checks if the system security settings, configured here, were modified. "
msgstr ""

#: ../src/msec/msecgui.py:60
msgid ""
"System security options.\n"
"\n"
"These options control the local security configuration, such as the login "
"restrictions,\n"
"password configurations, integration with other security tools, and default "
"file creation\n"
"permissions.\n"
msgstr ""

#: ../src/msec/msecgui.py:67
msgid ""
"Network security options.\n"
"\n"
"These options define the network security agains remote treats, unauthorized "
"accesses,\n"
"and breakin attempts.\n"
msgstr ""

#: ../src/msec/msecgui.py:73
msgid ""
"Periodic security checks.\n"
"\n"
"These options configure the security checks that should be executed "
"periodically.\n"
msgstr ""

#: ../src/msec/msecgui.py:78
msgid ""
"File permissions.\n"
"\n"
"These options allow to fine-tune system permissions for important files and "
"directores.\n"
"\n"
"The following permissions are checked periodically, and any change to the "
"owner, group,\n"
"or current permission is reported. The permissions can be enforced, "
"automatically\n"
"changing them to the specified values when a change is detected.\n"
msgstr ""

#: ../src/msec/msecgui.py:87
msgid "Save and apply new configuration?"
msgstr ""

#: ../src/msec/msecgui.py:152
msgid "_File"
msgstr ""

#: ../src/msec/msecgui.py:154
msgid "_Save configuration"
msgstr ""

#: ../src/msec/msecgui.py:156
msgid "_Import configuration"
msgstr ""

#: ../src/msec/msecgui.py:157
msgid "_Export configuration"
msgstr ""

#: ../src/msec/msecgui.py:159
msgid "_Quit"
msgstr ""

#: ../src/msec/msecgui.py:161 ../src/msec/msecgui.py:163
msgid "_Help"
msgstr ""

#: ../src/msec/msecgui.py:164
msgid "_About"
msgstr ""

#: ../src/msec/msecgui.py:194
msgid "Basic security"
msgstr ""

#: ../src/msec/msecgui.py:195
msgid "System security"
msgstr ""

#: ../src/msec/msecgui.py:196
msgid "Network security"
msgstr ""

#: ../src/msec/msecgui.py:197
msgid "Periodic checks"
msgstr ""

#: ../src/msec/msecgui.py:198 ../src/msec/msecgui.py:826
msgid "Permissions"
msgstr "Vergunnigs"

#: ../src/msec/msecgui.py:231
msgid "MSEC option changes"
msgstr ""

#: ../src/msec/msecgui.py:231
msgid "option"
msgstr ""

#: ../src/msec/msecgui.py:232
msgid "System permissions changes"
msgstr ""

#: ../src/msec/msecgui.py:232
msgid "permission check"
msgstr ""

#: ../src/msec/msecgui.py:242
msgid "changed %s <b>%s</b> (%s -> %s)"
msgstr ""

#: ../src/msec/msecgui.py:247
msgid "added %s <b>%s</b> (%s)"
msgstr ""

#: ../src/msec/msecgui.py:252
msgid "removed %s <b>%s</b>"
msgstr ""

#: ../src/msec/msecgui.py:256
msgid "no changes"
msgstr ""

#: ../src/msec/msecgui.py:268
msgid "Saving changes.."
msgstr ""

#: ../src/msec/msecgui.py:301
msgid "<b>%s:</b> <i>%s</i>\n"
msgstr ""

#: ../src/msec/msecgui.py:308
msgid "<b>MSEC test run results:</b> <i>%s</i>"
msgstr ""

#: ../src/msec/msecgui.py:316
msgid "Details"
msgstr "Detail"

#: ../src/msec/msecgui.py:322
msgid "MSEC messages (%s): %d"
msgstr ""

#: ../src/msec/msecgui.py:336
msgid "Details (%d changes).."
msgstr ""

#: ../src/msec/msecgui.py:381
msgid "No base msec level specified, using '%s'"
msgstr ""

#: ../src/msec/msecgui.py:384
msgid "Detected base msec level '%s'"
msgstr ""

#: ../src/msec/msecgui.py:389
msgid "Custom base config level '%s' found. Will default to '%s'"
msgstr ""

#: ../src/msec/msecgui.py:417
msgid "Security Option"
msgstr ""

#: ../src/msec/msecgui.py:427
msgid "Description"
msgstr "Beskrywing"

#: ../src/msec/msecgui.py:432
msgid "Value"
msgstr ""

#: ../src/msec/msecgui.py:442
msgid "Invalid option '%s'!"
msgstr ""

#: ../src/msec/msecgui.py:492
msgid "Enable MSEC tool"
msgstr ""

#: ../src/msec/msecgui.py:499
msgid "Select the base security level"
msgstr ""

#: ../src/msec/msecgui.py:503
msgid "Standard"
msgstr "Standaard"

#: ../src/msec/msecgui.py:518
#, fuzzy
msgid "Secure"
msgstr "Sekuriteit"

#: ../src/msec/msecgui.py:537
msgid "Send security alerts by email"
msgstr ""

#: ../src/msec/msecgui.py:544
msgid "System administrator email address:"
msgstr ""

#: ../src/msec/msecgui.py:563
msgid "Display security alerts on desktop"
msgstr ""

#: ../src/msec/msecgui.py:740
msgid "Enable periodic security checks"
msgstr ""

#: ../src/msec/msecgui.py:808
msgid "Path"
msgstr "Roete"

#: ../src/msec/msecgui.py:814
msgid "User"
msgstr "Gebruiker"

#: ../src/msec/msecgui.py:820
msgid "Group"
msgstr "Groep:"

#: ../src/msec/msecgui.py:834
msgid "Enforce"
msgstr ""

#: ../src/msec/msecgui.py:878
msgid "Reset to default level permissions"
msgstr ""

#: ../src/msec/msecgui.py:883
msgid "Add a rule"
msgstr "Voeg 'n reel by"

#: ../src/msec/msecgui.py:888
msgid "Delete"
msgstr "Uitwis"

#: ../src/msec/msecgui.py:971
msgid "Changing permissions for %s"
msgstr ""

#: ../src/msec/msecgui.py:978
msgid "Adding new permission check"
msgstr ""

#: ../src/msec/msecgui.py:990
msgid ""
"Changing permissions on <b>%s</b>\n"
"Please specify new permissions, or use 'current' to keep current "
"permissions.\n"
msgstr ""

#: ../src/msec/msecgui.py:998
msgid "File: "
msgstr ""

#: ../src/msec/msecgui.py:1006
msgid "User: "
msgstr ""

#: ../src/msec/msecgui.py:1014
msgid "Group: "
msgstr ""

#: ../src/msec/msecgui.py:1022
msgid "Permissions: "
msgstr ""

#: ../src/msec/msecgui.py:1083
msgid "Select new value for %s"
msgstr ""

#: ../src/msec/msecgui.py:1092
msgid ""
"<i>%s</i>\n"
"\n"
"\tCurrent value:\t\t\t<i>%s</i>\n"
"\t%sStandard level value:\t<i>%s</i>%s\n"
"\t%sSecure level value:\t\t<i>%s</i>%s\n"
msgstr ""

#: ../src/msec/msecgui.py:1103
msgid "New value:"
msgstr ""

#: ../src/msec/msecgui.py:1165
msgid "Save your changes?"
msgstr ""

#: ../src/msec/msecgui.py:1167
msgid "_Cancel"
msgstr ""

#: ../src/msec/msecgui.py:1168
msgid "_Ignore"
msgstr ""

#: ../src/msec/msecgui.py:1169
msgid "_Save"
msgstr ""

#: ../src/msec/msecgui.py:1171
msgid "Do you want to save changes before closing?"
msgstr ""