From f535cbd2007c85e15870b5f0089205f4883bcdf8 Mon Sep 17 00:00:00 2001 From: Eugeni Dodonov Date: Thu, 29 Jan 2009 20:15:14 +0000 Subject: Initial version of pt_BR translation. --- po/pt_BR.po | 1040 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1040 insertions(+) create mode 100644 po/pt_BR.po (limited to 'po') diff --git a/po/pt_BR.po b/po/pt_BR.po new file mode 100644 index 0000000..a00a7b0 --- /dev/null +++ b/po/pt_BR.po @@ -0,0 +1,1040 @@ +# msec pt_BR PO file +# Copyright (C) 2009, Mandriva +# Eugeni Dodonov , 2009 +# +msgid "" +msgstr "" +"Project-Id-Version: pt_BR\n" +"POT-Creation-Date: 2009-01-29 18:02+BRST\n" +"PO-Revision-Date: 2009-01-29 18:12-0300\n" +"Last-Translator: Eugeni Dodonov \n" +"Language-Team: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=utf-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Generated-By: pygettext.py 1.5\n" + +#: ../src/msec/help.py:15 +msgid "Enable name resolution spoofing protection." +msgstr "" + +#: ../src/msec/help.py:17 +msgid "Send mail reports even if no changes were detected." +msgstr "" + +#: ../src/msec/help.py:19 +msgid "Accept broadcasted ICMP echo." +msgstr "Aceitar mensagens ICMP enviadas por broadcast" + +#: ../src/msec/help.py:21 +msgid "Allow users to authenticate with their passwords for sudo. If this parameter is set to 'wheel', users must belong to the 'wheel' group to be able to use sudo" +msgstr "" + +#: ../src/msec/help.py:23 +msgid "Allow X server to accept connections from network on tcp port 6000." +msgstr "" + +#: ../src/msec/help.py:25 +msgid "Enable checking for known rootkits using chkrootkit." +msgstr "" + +#: ../src/msec/help.py:27 +msgid "Enable checking for additions/removals of suid root files." +msgstr "" + +#: ../src/msec/help.py:29 +msgid "Enable crontab and at for users. Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1) and crontab(1))." +msgstr "" + +#: ../src/msec/help.py:31 +msgid "Accept bogus IPv4 error messages." +msgstr "" + +#: ../src/msec/help.py:33 +msgid "Enable checksum verification for suid files." +msgstr "" + +#: ../src/msec/help.py:35 +msgid "User email to receive security notifications." +msgstr "" + +#: ../src/msec/help.py:37 +msgid "Allow autologin." +msgstr "" + +#: ../src/msec/help.py:39 +msgid "Allow only users in whell grup to su to root." +msgstr "" + +#: ../src/msec/help.py:41 +msgid "Creates the symlink /etc/security/msec/server to point to /etc/security/msec/server.SERVER_LEVEL. The /etc/security/msec/server is used by chkconfig --add to decide to add a service if it is present in the file during the installation of packages." +msgstr "" + +#: ../src/msec/help.py:43 +msgid "Set the shell timeout. A value of zero means no timeout." +msgstr "" + +#: ../src/msec/help.py:45 +msgid "Enable permission checking on users' files that should not be owned by someone else, or writable." +msgstr "" + +#: ../src/msec/help.py:47 +msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))." +msgstr "" + +#: ../src/msec/help.py:49 +msgid "Use password to authenticate users. Take EXTREMELY care when disabling passwords, as it will leave the machine vulnerable." +msgstr "" + +#: ../src/msec/help.py:51 +msgid "Set umask option for mounting vfat and ntfs partitions. If umask is '0', default system umask is used." +msgstr "" + +#: ../src/msec/help.py:53 +msgid "Enable checking for open network ports." +msgstr "" + +#: ../src/msec/help.py:55 +msgid "Enable logging of strange network packets." +msgstr "" + +#: ../src/msec/help.py:57 +msgid "Enable verification of installed RPM packages." +msgstr "" + +#: ../src/msec/help.py:59 +msgid "Allow root access without password for the members of the wheel group." +msgstr "" + +#: ../src/msec/help.py:61 +msgid "Send security check results by email." +msgstr "" + +#: ../src/msec/help.py:63 +msgid "Set the password minimum length and minimum number of digit and minimum number of capitalized letters, using length,ndigits,nupper format." +msgstr "" + +#: ../src/msec/help.py:65 +msgid "Set the root umask." +msgstr "" + +#: ../src/msec/help.py:67 +msgid "Enable checking for additions/removals of sgid files." +msgstr "" + +#: ../src/msec/help.py:69 +msgid "Activate ethernet cards promiscuity check." +msgstr "" + +#: ../src/msec/help.py:71 +msgid "Enable AppArmor security framework on boot" +msgstr "" + +#: ../src/msec/help.py:73 +msgid "Allow local users to connect to X server. Accepted arguments: yes (all connections are allowed), local (only local connection), no (no connection)." +msgstr "" + +#: ../src/msec/help.py:75 +msgid "Enable checking for files/directories writable by everybody." +msgstr "" + +#: ../src/msec/help.py:77 +msgid "Log syslog messages on console terminal 12." +msgstr "" + +#: ../src/msec/help.py:79 +msgid "Enable IP spoofing protection." +msgstr "" + +#: ../src/msec/help.py:81 +msgid "Defines the base security level, on top of which the current configuration is based." +msgstr "" + +#: ../src/msec/help.py:83 +msgid "Enable periodic permission checking for system files." +msgstr "" + +#: ../src/msec/help.py:85 +msgid "Set shell commands history size. A value of -1 means unlimited." +msgstr "" + +#: ../src/msec/help.py:87 +msgid "Allow system reboot and shutdown to local users." +msgstr "" + +#: ../src/msec/help.py:89 +msgid "Enables logging of periodic checks to system log." +msgstr "" + +#: ../src/msec/help.py:91 +msgid "Enable checking for dangerous options in users' .rhosts/.shosts files." +msgstr "" + +#: ../src/msec/help.py:93 +msgid "Enable password-related checks, such as empty passwords and strange super-user accounts." +msgstr "" + +#: ../src/msec/help.py:95 +msgid "Set the password history length to prevent password reuse. This is not supported by pam_tcb." +msgstr "" + +#: ../src/msec/help.py:97 +msgid "Enable daily security checks." +msgstr "" + +#: ../src/msec/help.py:99 +msgid "Allow direct root login on terminal." +msgstr "" + +#: ../src/msec/help.py:101 +msgid "Enable checking for unowned files." +msgstr "" + +#: ../src/msec/help.py:103 +msgid "Allow display managers (kdm and gdm) to display list of local users." +msgstr "" + +#: ../src/msec/help.py:105 +msgid "Show security notifications in system tray using libnotify." +msgstr "" + +#: ../src/msec/help.py:107 +msgid "Allow remote root login via sshd. If yes, login is allowed. If without-password, only public-key authentication logins are allowed. See sshd_config(5) man page for more information." +msgstr "" + +#: ../src/msec/help.py:109 +msgid "Perform hourly security check for changes in system configuration." +msgstr "" + +#: ../src/msec/help.py:111 +msgid "Ask for root password when going to single user level (man sulogin(8))." +msgstr "" + +#: ../src/msec/help.py:113 +msgid "Allow to export display when passing from the root account to the other users. See pam_xauth(8) for more details." +msgstr "" + +#: ../src/msec/help.py:115 +msgid "Set the user umask." +msgstr "" + +#: ../src/msec/help.py:117 +msgid "Accept ICMP echo." +msgstr "" + +#: ../src/msec/help.py:119 +msgid "Allow full access to network services controlled by tcp_wrapper (see hosts.deny(5)). If yes, all services are allowed. If local, only connections to local services are authorized. If no, the services must be authorized manually in /etc/hosts.allow (see hosts.allow(5))." +msgstr "" + +#: ../src/msec/help.py:121 +msgid "Enable periodic security check results to terminal." +msgstr "" + +#: ../src/msec/help.py:123 +msgid "Enable PolicyKit security framework" +msgstr "" + +#: ../src/msec/libmsec.py:328 +msgid "%s modified so launched command: %s" +msgstr "" + +#: ../src/msec/libmsec.py:337 +msgid "%s modified so should have run command: %s" +msgstr "" + +#: ../src/msec/libmsec.py:439 +#: ../src/msec/libmsec.py:471 +msgid "deleted %s" +msgstr "" + +#: ../src/msec/libmsec.py:457 +msgid "touched file %s" +msgstr "" + +#: ../src/msec/libmsec.py:477 +msgid "made symbolic link from %s to %s" +msgstr "" + +#: ../src/msec/libmsec.py:480 +msgid "moved file %s to %s" +msgstr "" + +#: ../src/msec/libmsec.py:530 +#: ../src/msec/libmsec.py:546 +msgid "set variable %s to %s in %s" +msgstr "" + +#: ../src/msec/libmsec.py:534 +msgid "WARNING: never found regexp %s in %s, not writing changes" +msgstr "" + +#: ../src/msec/libmsec.py:628 +msgid "" +"replaced in %s the line %d:\n" +"%s\n" +"with the line:\n" +"%s" +msgstr "" + +#: ../src/msec/libmsec.py:636 +#: ../src/msec/libmsec.py:660 +msgid "" +"appended in %s the line:\n" +"%s" +msgstr "" + +#: ../src/msec/libmsec.py:653 +msgid "" +"inserted in %s after the line %d:\n" +"%s\n" +"the line:\n" +"%s" +msgstr "" + +#: ../src/msec/libmsec.py:674 +msgid "" +"inserted in %s before the line %d:\n" +"%s\n" +"the line:\n" +"%s" +msgstr "" + +#: ../src/msec/libmsec.py:681 +msgid "" +"inserted at the top of %s the line:\n" +"%s" +msgstr "" + +#: ../src/msec/libmsec.py:691 +msgid "" +"inserted in %s at the line %d:\n" +"%s" +msgstr "" + +#: ../src/msec/libmsec.py:704 +msgid "" +"removing in %s the line %d:\n" +"%s" +msgstr "" + +#: ../src/msec/libmsec.py:749 +#: ../src/msec/libmsec.py:1690 +msgid "In check-only mode, nothing is written back to disk." +msgstr "" + +#: ../src/msec/libmsec.py:766 +msgid "'%s' is not available in this version" +msgstr "" + +#: ../src/msec/libmsec.py:776 +msgid "Invalid parameter for %s: '%s'. Valid parameters: '%s'." +msgstr "" + +#: ../src/msec/libmsec.py:791 +msgid "Allowing unrestricted chkconfig for packages" +msgstr "" + +#: ../src/msec/libmsec.py:796 +msgid "Restricting chkconfig for packages according to \"%s\" profile" +msgstr "" + +#: ../src/msec/libmsec.py:806 +msgid "Setting root umask to %s" +msgstr "" + +#: ../src/msec/libmsec.py:816 +msgid "Setting users umask to %s" +msgstr "" + +#: ../src/msec/libmsec.py:837 +msgid "Allowing users to connect X server from everywhere" +msgstr "" + +#: ../src/msec/libmsec.py:840 +msgid "Allowing users to connect X server from localhost" +msgstr "" + +#: ../src/msec/libmsec.py:843 +msgid "Restricting X server connection to the console user" +msgstr "" + +#: ../src/msec/libmsec.py:846 +msgid "invalid allow_x_connections arg: %s" +msgstr "" + +#: ../src/msec/libmsec.py:869 +msgid "Allowing the X server to listen to tcp connections" +msgstr "" + +#: ../src/msec/libmsec.py:880 +msgid "Forbidding the X server to listen to tcp connection" +msgstr "" + +#: ../src/msec/libmsec.py:896 +msgid "Invalid shell timeout \"%s\"" +msgstr "" + +#: ../src/msec/libmsec.py:904 +msgid "Setting shell timeout to %s" +msgstr "" + +#: ../src/msec/libmsec.py:912 +msgid "Invalid shell history size \"%s\"" +msgstr "" + +#: ../src/msec/libmsec.py:923 +msgid "Setting shell history size to %s" +msgstr "" + +#: ../src/msec/libmsec.py:927 +msgid "Removing limit on shell history size" +msgstr "" + +#: ../src/msec/libmsec.py:966 +msgid "Allowing reboot and shutdown to the console user" +msgstr "" + +#: ../src/msec/libmsec.py:973 +msgid "Allowing SysRq key to the console user" +msgstr "" + +#: ../src/msec/libmsec.py:976 +msgid "Allowing Shutdown/Reboot in GDM" +msgstr "" + +#: ../src/msec/libmsec.py:980 +msgid "Allowing Shutdown/Reboot in KDM" +msgstr "" + +#: ../src/msec/libmsec.py:983 +msgid "Allowing Ctrl-Alt-Del from console" +msgstr "" + +#: ../src/msec/libmsec.py:987 +msgid "Forbidding reboot and shutdown to the console user" +msgstr "" + +#: ../src/msec/libmsec.py:995 +msgid "Forbidding SysRq key to the console user" +msgstr "" + +#: ../src/msec/libmsec.py:998 +msgid "Forbidding Shutdown/Reboot in GDM" +msgstr "" + +#: ../src/msec/libmsec.py:1002 +msgid "Forbidding Shutdown/Reboot in KDM" +msgstr "" + +#: ../src/msec/libmsec.py:1005 +msgid "Forbidding Ctrl-Alt-Del from console" +msgstr "" + +#: ../src/msec/libmsec.py:1019 +msgid "Allowing list of users in KDM" +msgstr "" + +#: ../src/msec/libmsec.py:1023 +msgid "Allowing list of users in GDM" +msgstr "" + +#: ../src/msec/libmsec.py:1028 +msgid "Forbidding list of users in KDM" +msgstr "" + +#: ../src/msec/libmsec.py:1032 +msgid "Forbidding list of users in GDM" +msgstr "" + +#: ../src/msec/libmsec.py:1058 +msgid "Allowing direct root login" +msgstr "" + +#: ../src/msec/libmsec.py:1075 +msgid "Forbidding direct root login" +msgstr "" + +#: ../src/msec/libmsec.py:1099 +msgid "Allowing remote root login" +msgstr "" + +#: ../src/msec/libmsec.py:1103 +msgid "Forbidding remote root login" +msgstr "" + +#: ../src/msec/libmsec.py:1107 +msgid "Allowing remote root login only by passphrase" +msgstr "" + +#: ../src/msec/libmsec.py:1119 +msgid "Allowing su only from wheel group members" +msgstr "" + +#: ../src/msec/libmsec.py:1123 +msgid "no wheel group" +msgstr "" + +#: ../src/msec/libmsec.py:1127 +msgid "wheel group is empty" +msgstr "" + +#: ../src/msec/libmsec.py:1135 +msgid "Allowing su for all" +msgstr "" + +#: ../src/msec/libmsec.py:1154 +msgid "Allowing transparent root access for wheel group members" +msgstr "" + +#: ../src/msec/libmsec.py:1162 +msgid "Disabling transparent root access for wheel group members" +msgstr "" + +#: ../src/msec/libmsec.py:1176 +msgid "Allowing autologin" +msgstr "" + +#: ../src/msec/libmsec.py:1179 +msgid "Forbidding autologin" +msgstr "" + +#: ../src/msec/libmsec.py:1184 +msgid "Activating password in boot loader" +msgstr "" + +#: ../src/msec/libmsec.py:1198 +msgid "Removing password in boot loader" +msgstr "" + +#: ../src/msec/libmsec.py:1213 +msgid "Enabling log on console" +msgstr "" + +#: ../src/msec/libmsec.py:1217 +msgid "Disabling log on console" +msgstr "" + +#: ../src/msec/libmsec.py:1229 +msgid "Activating daily security check" +msgstr "" + +#: ../src/msec/libmsec.py:1233 +msgid "Disabling daily security check" +msgstr "" + +#: ../src/msec/libmsec.py:1250 +msgid "Authorizing all services" +msgstr "" + +#: ../src/msec/libmsec.py:1254 +msgid "Disabling all services" +msgstr "" + +#: ../src/msec/libmsec.py:1258 +msgid "Disabling non local services" +msgstr "" + +#: ../src/msec/libmsec.py:1291 +msgid "Enabling name resolution spoofing protection" +msgstr "" + +#: ../src/msec/libmsec.py:1296 +msgid "Disabling name resolution spoofing protection" +msgstr "" + +#: ../src/msec/libmsec.py:1325 +msgid "Invalid password length \"%s\". Use \"length,ndigits,nupper\" as parameter" +msgstr "" + +#: ../src/msec/libmsec.py:1346 +msgid "Setting minimum password length %d" +msgstr "" + +#: ../src/msec/libmsec.py:1370 +msgid "Using password to authenticate users" +msgstr "" + +#: ../src/msec/libmsec.py:1374 +msgid "Don't use password to authenticate users" +msgstr "" + +#: ../src/msec/libmsec.py:1385 +msgid "Password history not supported with pam_tcb." +msgstr "" + +#: ../src/msec/libmsec.py:1393 +msgid "Invalid maximum password history length: \"%s\"" +msgstr "" + +#: ../src/msec/libmsec.py:1408 +msgid "Setting password history to %d." +msgstr "" + +#: ../src/msec/libmsec.py:1414 +msgid "Disabling password history" +msgstr "" + +#: ../src/msec/libmsec.py:1425 +msgid "Enabling sulogin in single user runlevel" +msgstr "" + +#: ../src/msec/libmsec.py:1429 +msgid "Disabling sulogin in single user runlevel" +msgstr "" + +#: ../src/msec/libmsec.py:1441 +msgid "Enabling msec periodic runs" +msgstr "" + +#: ../src/msec/libmsec.py:1445 +msgid "Disabling msec periodic runs" +msgstr "" + +#: ../src/msec/libmsec.py:1458 +msgid "Enabling crontab and at" +msgstr "" + +#: ../src/msec/libmsec.py:1465 +msgid "Disabling crontab and at" +msgstr "" + +#: ../src/msec/libmsec.py:1477 +msgid "Allowing export display from root" +msgstr "" + +#: ../src/msec/libmsec.py:1481 +msgid "Forbidding export display from root" +msgstr "" + +#: ../src/msec/libmsec.py:1492 +msgid "Activating periodic promiscuity check" +msgstr "" + +#: ../src/msec/libmsec.py:1496 +msgid "Disabling periodic promiscuity check" +msgstr "" + +#: ../src/msec/libmsec.py:1620 +msgid "user name %s not found" +msgstr "" + +#: ../src/msec/libmsec.py:1632 +msgid "user name not found for id %d" +msgstr "" + +#: ../src/msec/libmsec.py:1644 +msgid "group name %s not found" +msgstr "" + +#: ../src/msec/libmsec.py:1656 +msgid "group name not found for id %d" +msgstr "" + +#: ../src/msec/libmsec.py:1666 +msgid "Unable to check /proc/mounts. Assuming all file systems are local." +msgstr "" + +#: ../src/msec/libmsec.py:1705 +msgid "Enforcing user on %s to %s" +msgstr "" + +#: ../src/msec/libmsec.py:1709 +msgid "Error changing user on %s: %s" +msgstr "" + +#: ../src/msec/libmsec.py:1711 +msgid "Wrong owner of %s: should be %s" +msgstr "" + +#: ../src/msec/libmsec.py:1714 +msgid "Enforcing group on %s to %s" +msgstr "" + +#: ../src/msec/libmsec.py:1718 +msgid "Error changing group on %s: %s" +msgstr "" + +#: ../src/msec/libmsec.py:1720 +msgid "Wrong group of %s: should be %s" +msgstr "" + +#: ../src/msec/libmsec.py:1725 +msgid "Enforcing permissions on %s to %o" +msgstr "" + +#: ../src/msec/libmsec.py:1729 +msgid "Error changing permissions on %s: %s" +msgstr "" + +#: ../src/msec/libmsec.py:1731 +msgid "Wrong permissions of %s: should be %o" +msgstr "" + +#: ../src/msec/libmsec.py:1748 +msgid "bad permissions for '%s': '%s'" +msgstr "" + +#: ../src/msec/libmsec.py:1773 +msgid "Non local file: \"%s\". Nothing changed." +msgstr "" + +#: ../src/msec/libmsec.py:1815 +msgid "Checking paths: %s" +msgstr "" + +#: ../src/msec/msec.py:82 +#: ../src/msec/msecperms.py:95 +msgid "Invalid security level '%s'." +msgstr "" + +#: ../src/msec/msec.py:100 +#: ../src/msec/msecperms.py:119 +msgid "Msec: Mandriva Security Center (%s)\n" +msgstr "Msec: Centro de Segurança de Mandriva (%s)\n" + +#: ../src/msec/msec.py:101 +#: ../src/msec/msecperms.py:120 +msgid "Error: This application must be executed by root!" +msgstr "" + +#: ../src/msec/msec.py:102 +#: ../src/msec/msecperms.py:121 +msgid "Run with --help to get help." +msgstr "" + +#: ../src/msec/msec.py:124 +#: ../src/msec/msecperms.py:142 +msgid "Level '%s' not found, aborting." +msgstr "" + +#: ../src/msec/msec.py:126 +#: ../src/msec/msecperms.py:144 +msgid "Switching to '%s' level." +msgstr "" + +#: ../src/msec/msec.py:142 +#: ../src/msec/msecperms.py:161 +msgid "Unable to save config!" +msgstr "" + +#: ../src/msec/msecgui.py:50 +msgid "" +"Choose security level\n" +"\n" +"This application allows you to configure your system security. If you wish\n" +"to activate it, choose the appropriate security level:\n" +msgstr "" + +#: ../src/msec/msecgui.py:56 +msgid "This profile configures a reasonably safe set of security features. It activates several non-intrusive periodic system checks. This is the suggested level for Desktop." +msgstr "" + +#: ../src/msec/msecgui.py:58 +msgid "This profile is configured to provide maximum security, even at the cost of limiting the remote access to the system. It also runs a wider set of periodic checks, enforces the local password settings, and periodically checks if the system security settings, configured here, were modified. " +msgstr "" + +#: ../src/msec/msecgui.py:61 +msgid "" +"System security options.\n" +"\n" +"These options control the local security configuration, such as the login restrictions,\n" +"password configurations, integration with other security tools, and default file creation\n" +"permissions.\n" +msgstr "" + +#: ../src/msec/msecgui.py:68 +msgid "" +"Network security options.\n" +"\n" +"These options define the network security agains remote treats, unauthorized accesses,\n" +"and breakin attempts.\n" +msgstr "" + +#: ../src/msec/msecgui.py:74 +msgid "" +"Periodic security checks.\n" +"\n" +"These options configure the security checks that should be executed periodically.\n" +msgstr "" + +#: ../src/msec/msecgui.py:79 +msgid "" +"File permissions.\n" +"\n" +"These options allow to fine-tune system permissions for important files and directores.\n" +"\n" +"The following permissions are checked periodically, and any change to the owner, group,\n" +"or current permission is reported. The permissions can be enforced, automatically\n" +"changing them to the specified values when a change is detected.\n" +msgstr "" + +#: ../src/msec/msecgui.py:88 +msgid "Save and apply new configuration?" +msgstr "Salvar e aplicar nova configuração?" + +#: ../src/msec/msecgui.py:153 +msgid "_File" +msgstr "_Arquivo" + +#: ../src/msec/msecgui.py:155 +msgid "_Save configuration" +msgstr "_Salvar configuração" + +#: ../src/msec/msecgui.py:157 +msgid "_Import configuration" +msgstr "_Importar configuração" + +#: ../src/msec/msecgui.py:158 +msgid "_Export configuration" +msgstr "_Exportar configuração" + +#: ../src/msec/msecgui.py:160 +msgid "_Quit" +msgstr "_Sair" + +#: ../src/msec/msecgui.py:162 +#: ../src/msec/msecgui.py:164 +msgid "_Help" +msgstr "_Ajuda" + +#: ../src/msec/msecgui.py:165 +msgid "_About" +msgstr "_Sobre" + +#: ../src/msec/msecgui.py:195 +msgid "Basic security" +msgstr "Segurança básica" + +#: ../src/msec/msecgui.py:196 +msgid "System security" +msgstr "Segurança do sistema" + +#: ../src/msec/msecgui.py:197 +msgid "Network security" +msgstr "Segurança de rede" + +#: ../src/msec/msecgui.py:198 +msgid "Periodic checks" +msgstr "Verificações periódicas" + +#: ../src/msec/msecgui.py:199 +#: ../src/msec/msecgui.py:827 +msgid "Permissions" +msgstr "Permissões" + +#: ../src/msec/msecgui.py:232 +msgid "MSEC option changes" +msgstr "Alterações nas opções do MSEC" + +#: ../src/msec/msecgui.py:232 +msgid "option" +msgstr "opção" + +#: ../src/msec/msecgui.py:233 +msgid "System permissions changes" +msgstr "Mudanças nas permisões do sistema" + +#: ../src/msec/msecgui.py:233 +msgid "permission check" +msgstr "verificação de permissões" + +#: ../src/msec/msecgui.py:243 +msgid "changed %s %s (%s -> %s)" +msgstr "alterado %s %s (%s -> %s)" + +#: ../src/msec/msecgui.py:248 +msgid "added %s %s (%s)" +msgstr "adicionado %s %s (%s)" + +#: ../src/msec/msecgui.py:253 +msgid "removed %s %s" +msgstr "removido %s %s" + +#: ../src/msec/msecgui.py:257 +msgid "no changes" +msgstr "nenhuma alteração" + +#: ../src/msec/msecgui.py:269 +msgid "Saving changes.." +msgstr "Salvando alterações.." + +#: ../src/msec/msecgui.py:302 +msgid "%s: %s\n" +msgstr "" + +#: ../src/msec/msecgui.py:309 +msgid "MSEC test run results: %s" +msgstr "" + +#: ../src/msec/msecgui.py:317 +msgid "Details" +msgstr "Detalhes" + +#: ../src/msec/msecgui.py:323 +msgid "MSEC messages (%s): %d" +msgstr "" + +#: ../src/msec/msecgui.py:337 +msgid "Details (%d changes).." +msgstr "Detalhes (%d mudanças)" + +#: ../src/msec/msecgui.py:382 +msgid "No base msec level specified, using '%s'" +msgstr "" + +#: ../src/msec/msecgui.py:385 +msgid "Detected base msec level '%s'" +msgstr "Encontrado nível de segurança '%s'" + +#: ../src/msec/msecgui.py:390 +msgid "Custom base config level found. Will default to '%s'" +msgstr "Nível de segurança customizado encontrada. Valores serão baseados em '%s'" + +#: ../src/msec/msecgui.py:418 +msgid "Security Option" +msgstr "Opção de segurança" + +#: ../src/msec/msecgui.py:428 +msgid "Description" +msgstr "Descrição" + +#: ../src/msec/msecgui.py:433 +msgid "Value" +msgstr "Valor" + +#: ../src/msec/msecgui.py:443 +msgid "Invalid option '%s'!" +msgstr "Opção inválida: '%s'!" + +#: ../src/msec/msecgui.py:493 +msgid "Enable MSEC tool" +msgstr "Habilitar ferramenta MSEC" + +#: ../src/msec/msecgui.py:500 +msgid "Select the base security level" +msgstr "Selecione o nível de segurança" + +#: ../src/msec/msecgui.py:504 +msgid "Default" +msgstr "Padrão" + +#: ../src/msec/msecgui.py:519 +msgid "SECURE" +msgstr "Seguro" + +#: ../src/msec/msecgui.py:538 +msgid "Send security alerts by email" +msgstr "Enviar notificações de segurança por email" + +#: ../src/msec/msecgui.py:545 +msgid "System administrator email address:" +msgstr "Endereço de email do administrador:" + +#: ../src/msec/msecgui.py:564 +msgid "Display security alerts on desktop" +msgstr "Mostrar notificações de segurança na área de trabalho" + +#: ../src/msec/msecgui.py:741 +msgid "Enable periodic security checks" +msgstr "Habilitar verificações periódicas de segurança" + +#: ../src/msec/msecgui.py:809 +msgid "Path" +msgstr "Caminho" + +#: ../src/msec/msecgui.py:815 +msgid "User" +msgstr "Usuário" + +#: ../src/msec/msecgui.py:821 +msgid "Group" +msgstr "Grupo" + +#: ../src/msec/msecgui.py:835 +msgid "Enforce" +msgstr "Reforçar" + +#: ../src/msec/msecgui.py:879 +msgid "Reset to default level permissions" +msgstr "Resetar para configurações sugeridas" + +#: ../src/msec/msecgui.py:884 +msgid "Add a rule" +msgstr "Adicionar nova regra" + +#: ../src/msec/msecgui.py:889 +msgid "Delete" +msgstr "Remover" + +#: ../src/msec/msecgui.py:972 +msgid "Changing permissions for %s" +msgstr "Alterando permissões para %s" + +#: ../src/msec/msecgui.py:979 +msgid "Adding new permission check" +msgstr "Adicionando nova verificação de permissões" + +#: ../src/msec/msecgui.py:991 +msgid "" +"Changing permissions on %s\n" +"Please specify new permissions, or use 'current' to keep current permissions.\n" +msgstr "" + +#: ../src/msec/msecgui.py:999 +msgid "File: " +msgstr "Arquivo:" + +#: ../src/msec/msecgui.py:1007 +msgid "User: " +msgstr "Usuário:" + +#: ../src/msec/msecgui.py:1015 +msgid "Group: " +msgstr "Grupo:" + +#: ../src/msec/msecgui.py:1023 +msgid "Permissions: " +msgstr "Permissões:" + +#: ../src/msec/msecgui.py:1084 +msgid "Select new value for %s" +msgstr "Selecione novo valor para %s" + +#: ../src/msec/msecgui.py:1093 +msgid "" +"%s\n" +"\n" +"\tCurrent value:\t\t\t%s\n" +"\t%sDefault level value:\t%s%s\n" +"\t%sSecure level value:\t\t%s%s\n" +msgstr "" +"%s\n" +"\n" +"\tValor atual:\t\t\t%s\n" +"\t%sValor sugerido para nível padrão:\t%s%s\n" +"\t%sValor sugerido para nível seguro:\t\t%s%s\n" + +#: ../src/msec/msecgui.py:1104 +msgid "New value:" +msgstr "Novo valor:" + +#: ../src/msec/msecgui.py:1166 +msgid "Save your changes?" +msgstr "Salvar alterações?" + +#: ../src/msec/msecgui.py:1168 +msgid "_Cancel" +msgstr "_Cancelar" + +#: ../src/msec/msecgui.py:1169 +msgid "_Ignore" +msgstr "_Ignorar" + +#: ../src/msec/msecgui.py:1170 +msgid "_Save" +msgstr "_Salvar" + +#: ../src/msec/msecgui.py:1172 +msgid "Do you want to save changes before closing?" +msgstr "Salvar alterações antes de fechar?" + -- cgit v1.2.1