Banana Pro SBC ========== Short ----- * [Board Informations](#SBC_INFO) * [U-Boot](#UBOOT_INFO) * [Kernel](#KERNEL_INFO) # About the Banana Pro SBC from LeMaker ## External links http://wiki.lemaker.org/BananaPro/Pi:Building_u-boot,_script.bin_and_linux-kernel#Building_the_kernel http://wiki.lemaker.org/BananaPro/Pi:Setting_up_the_bootable_SD_card https://sites.google.com/site/manisbutareed/bringing-my-beagles-to-heel/selected-annotated-u-boot-commands https://linux-sunxi.org/Mainline_Kernel_Howto https://linux-sunxi.org/Manual_build_howto#Setting_up_the_boot_partition https://stackoverflow.com/questions/28891221/uenv-txt-vs-boot-scr https://github.com/linux-sunxi/u-boot-sunxi/wiki ## LeMaker BPS (board package support) git clone --recursive https://github.com/LeMaker/lemaker-bsp.git ./fex2bin ../sunxi-boards/sys_config/a20/BananaPro.fex ../../mageia4arm/bananaPro/script.bin # About U-Boot The mainline U-Boot is used for this port. ## Mainline ``` CONFIG_PATH=~/workspaces/mageia4arm/platforms/bananaPro git clone https://gitlab.denx.de/u-boot/u-boot cd u-boot make CROSS_COMPILE=arm-linux-gnu- Bananapro_defconfig cp ${CONFIG_PATH}/UBOOT.config ./.config #Just modify few unimportant things, like prompt, name, ... make ARCH=arm CROSS_COMPILE=arm-linux-gnu- -j8 make ARCH=arm CROSS_COMPILE=arm-linux-gnu- #cp ./u-boot.dtb ${CONFIG_PATH}/sun7i-a20-bananapro.dtb cp -f ./u-boot.dtb ${CONFIG_PATH}/u-boot.dtb cp -f ./arch/arm/dts/sun7i-a20-bananapro.dtb ${CONFIG_PATH}/sun7i-a20-bananapro.dtb cp -f ./u-boot-sunxi-with-spl.bin ${CONFIG_PATH}/u-boot-sunxi-with-spl.bin #Inside "specialFunctions.sh" #dd if=${CONFIG_PATH}/u-boot-sunxi-with-spl.bin of=${DEVICE} bs=1024 seek=8 echo ' setenv KERNEL_FILE /boot/vmlinuz setenv INIT_FILE /boot/initrd.img #setenv DTB_FILE /boot/sun7i-a20-bananapro.dtb setenv DTB_FILE /boot/u-boot.dtb setenv KERNEL_ADDR 0x40008000 #setenv INIT_ADDR 0x45000000 setenv INIT_ADDR - setenv DTB_ADDR 0x48000000 ext4load mmc 0:1 ${KERNEL_ADDR} ${KERNEL_FILE} #ext4load mmc 0:1 ${INIT_ADDR} ${INIT_FILE} ext4load mmc 0:1 ${DTB_ADDR} ${DTB_FILE} setenv bootargs console=ttyS0,115200 disp.screen0_output_mode=EDID:1024x768p50 hdmi.audio=EDID:0 root=/dev/mmcblk0p1 rootfstype=ext4 elevator=deadline rootwait #printenv bootz ${KERNEL_ADDR} ${INIT_ADDR} ${DTB_ADDR} #Compile boot.scr : mkimage -C none -A arm -T script -d "${CONFIG_PATH}/boot.cmd" "${CONFIG_PATH}/boot.scr" ' >${CONFIG_PATH}/boot.cmd ``` mkimage -C none -A arm -T script -d ${CONFIG_PATH}/boot.cmd ${CONFIG_PATH}/boot.scr ## UBoot Sunxi From LeMaker Obsolet, see 'LeMaker BPS (board package support)'. ## UBoot Sunxi Generic u-boot for sunxi ``` git clone https://github.com/linux-sunxi/u-boot-sunxi make CROSS_COMPILE=arm-linux-gnu- Bananapro_config make CROSS_COMPILE=arm-linux-gnu- -j8 make CROSS_COMPILE=arm-linux-gnu- #Need network support to give the MAC address. #Do not activate boot timing. #Default conf use bootz and dtb tree. ``` ## Default LeMaker script ``` setenv bootargs console=ttyS0,115200 noinitrd disp.screen0_output_mode=EDID:1280x720p50 init=/init root=/dev/mmcblk0p2 rootwait panic=10 ${extra} fatload mmc 0 0x43000000 script.bin fatload mmc 0 0x48000000 uImage bootm 0x48000000 ``` ## DTB from Linux Mainline ``` git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git --depth=1 make ARCH=arm CROSS_COMPILE=arm-linux-gnu- sunxi_defconfig ARCH=arm CROSS_COMPILE=arm-linux-gnu- make -j8 dtbs cp ./arch/arm/boot/dts/sun7i-a20-bananapro.dtb ./sun7i-a20-bananapro.dtb ``` # About the Kernel Not Written. ## Generate symlink ``` #Generating a symbolic relative link to the "last" kernel : ln -r -s ./vmlinuz-5.2.13-desktop-2.mga7 ./vmlinuz rm -f ./vmlinuz && ln -r -s ./vmlinuz-5.3.1-desktop-2.mga7 ./vmlinuz ``` ## Commands used : ./create_arm_image.sh --clean --config bananaPro --build-path ./build ./create_arm_image.sh --all --target bananaPro --size 2 --tainted --nonfree --build-path ./build --config bananaPro 2>&1 | tee -a ./log/creation.log dd if=./build/Mageia-7-bananaPro1.img | pv | dd of=/dev/mmcblk0 ; sync