From a28821c8f1fd2153bdb0261f49b7e8a7aad15955 Mon Sep 17 00:00:00 2001
From: Daniel Tartavel <contact@librepc.com>
Date: Sat, 4 Aug 2018 08:37:59 +0200
Subject: First commit

---
 common/etc/sysconfig/network |  3 +++
 rpi/boot.cmd                 |  5 +++++
 rpi/u-boot.config            | 11 +++++++++++
 3 files changed, 19 insertions(+)
 create mode 100644 common/etc/sysconfig/network
 create mode 100644 rpi/boot.cmd
 create mode 100644 rpi/u-boot.config

diff --git a/common/etc/sysconfig/network b/common/etc/sysconfig/network
new file mode 100644
index 0000000..9f685fd
--- /dev/null
+++ b/common/etc/sysconfig/network
@@ -0,0 +1,3 @@
+HOSTNAME=raspberry.pi
+NETWORKING=yes
+CRDA_DOMAIN=US
diff --git a/rpi/boot.cmd b/rpi/boot.cmd
new file mode 100644
index 0000000..4d2f4c2
--- /dev/null
+++ b/rpi/boot.cmd
@@ -0,0 +1,5 @@
+fatload mmc 0:1 ${kernel_addr_r} zImage
+fatload mmc 0:1 ${fdt_addr_r} bcm2710-rpi-3-b.dtb
+fatload mmc 0:1 ${ramdisk_addr_r} uInitrd
+setenv bootargs console=ttyAMA0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait panic=10
+bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
diff --git a/rpi/u-boot.config b/rpi/u-boot.config
new file mode 100644
index 0000000..b8ca6e7
--- /dev/null
+++ b/rpi/u-boot.config
@@ -0,0 +1,11 @@
+# swarren's branch already sets this automatically, so you can skip this
+# Mainline U-Boot will set the following automatically soon
+setenv fdtfile bcm2835-rpi-b.dtb
+
+mmc dev 0
+fatload mmc 0:1 ${kernel_addr_r} zImage
+# IMPORTANT NOTE: On mainline u-boot, the correct variable to use here is ${fdt_addr} and NOT ${fdt_addr_r}
+fatload mmc 0:1 ${fdt_addr_r} ${fdtfile}
+setenv bootargs earlyprintk console=tty0 console=ttyAMA0 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait noinitrd
+# IMPORTANT NOTE: On mainline u-boot, the correct variable to use here is ${fdt_addr} and NOT ${fdt_addr_r}
+bootz ${kernel_addr_r} - ${fdt_addr_r}
-- 
cgit v1.2.1