diff options
| -rwxr-xr-x | platforms/rpi-aarch64/boot/EFI/BOOT/bootaa64.efi | bin | 0 -> 1382256 bytes | |||
| -rwxr-xr-x | platforms/rpi-aarch64/boot/EFI/BOOT/grub.cfg | 4 | ||||
| -rwxr-xr-x | platforms/rpi-aarch64/boot/config.txt | 71 | ||||
| -rwxr-xr-x | platforms/rpi-aarch64/boot/startup.nsh | 1 | ||||
| -rwxr-xr-x | platforms/rpi-aarch64/boot/ubootconfig.txt | 2 | ||||
| -rw-r--r-- | platforms/rpi-aarch64/mageia4arm.cfg | 91 | ||||
| -rw-r--r-- | platforms/rpi-aarch64/second_stage_install.sh | 47 | ||||
| -rwxr-xr-x | platforms/rpi-aarch64/specialFunctions.sh | 69 |
8 files changed, 285 insertions, 0 deletions
diff --git a/platforms/rpi-aarch64/boot/EFI/BOOT/bootaa64.efi b/platforms/rpi-aarch64/boot/EFI/BOOT/bootaa64.efi Binary files differnew file mode 100755 index 0000000..b04f373 --- /dev/null +++ b/platforms/rpi-aarch64/boot/EFI/BOOT/bootaa64.efi diff --git a/platforms/rpi-aarch64/boot/EFI/BOOT/grub.cfg b/platforms/rpi-aarch64/boot/EFI/BOOT/grub.cfg new file mode 100755 index 0000000..a72d635 --- /dev/null +++ b/platforms/rpi-aarch64/boot/EFI/BOOT/grub.cfg @@ -0,0 +1,4 @@ +set btrfs_relative_path="yes" +search --file --set=root /boot/grub2/grub.cfg +set prefix=($root)/boot/grub2 +configfile ($root)/boot/grub2/grub.cfg diff --git a/platforms/rpi-aarch64/boot/config.txt b/platforms/rpi-aarch64/boot/config.txt new file mode 100755 index 0000000..9ba1d14 --- /dev/null +++ b/platforms/rpi-aarch64/boot/config.txt @@ -0,0 +1,71 @@ +# Get more options/information on http://elinux.org/RPiconfig +# or on https://www.raspberrypi.org/documentation/configuration/config-txt.md +# +# !!!!! This file will get overwritten by updates. Please use !!!!! +# !!!!! extraconfig.txt if you want to set additional !!!!! +# !!!!! configuration options or add dt overlays. !!!!! + +# Our kernels are located on a Linux partition. Chainload U-Boot to load them. +kernel=u-boot.bin + +# Use 32 MB for GPU for all RPis (Min 16 - Max 192 MB) +# We don't need that much memory reserved for it, because we drive most hardware +# from Linux, not the VPU OS +gpu_mem=32 + +# Turbo mode: 0 = enable dynamic freq/voltage - 1 = always max +force_turbo=0 +# Start in turbo mode for 30 seconds or until cpufreq sets a frequency +initial_turbo=30 + +# DO NOT overvoltage manually to not void warranty! +over_voltage=0 + +# Fix mini UART input frequency, and setup/enable up the UART. +enable_uart=1 + +# Disable warning overlays as they don't work well together with linux's graphical output +avoid_warnings=1 + +# This overlay fixes divergences between the RPi device tree and what +# upstream provides +dtoverlay=upstream + +# overscan is only needed on old TV sets and if analog gear is in the chain (e.g. DPI) +disable_overscan=1 + +# u-boot expects RPi's UART to have a compatible string not supported anymore in +# linux upstream, while this is fixed, make sure the name shows up in the +# device-tree. This is only needed for RPi, RPi2 and RPi0, but applied +# generally so as to avoid complexity. +dtoverlay=uboot-bcm2835-pl011 + +[pi1] + +# Max ARM freq (default 700 MHz) +arm_freq=840 + +# Max core (GPU) freq (default 250 MHz) +core_freq=375 + +# SDRAM freq (default 400) +sdram_freq=400 + +[pi3] + +# These are not applied automatically? Needed to use respective upstream drivers. +dtoverlay=vc4-kms-v3d,cma-default +dtoverlay=dwc2 + +[pi4] + +dtoverlay=disable-vc4 + +[all] + +# Allow u-boot to set arm_control +include ubootconfig.txt + +# Allow user overrides of config options +include extraconfig.txt + diff --git a/platforms/rpi-aarch64/boot/startup.nsh b/platforms/rpi-aarch64/boot/startup.nsh new file mode 100755 index 0000000..f4db51f --- /dev/null +++ b/platforms/rpi-aarch64/boot/startup.nsh @@ -0,0 +1 @@ +bootaa64 diff --git a/platforms/rpi-aarch64/boot/ubootconfig.txt b/platforms/rpi-aarch64/boot/ubootconfig.txt new file mode 100755 index 0000000..9770251 --- /dev/null +++ b/platforms/rpi-aarch64/boot/ubootconfig.txt @@ -0,0 +1,2 @@ +# Boot in AArch64 mode +arm_64bit=1 diff --git a/platforms/rpi-aarch64/mageia4arm.cfg b/platforms/rpi-aarch64/mageia4arm.cfg new file mode 100644 index 0000000..b862020 --- /dev/null +++ b/platforms/rpi-aarch64/mageia4arm.cfg @@ -0,0 +1,91 @@ + +# Copyright (C) 2017-2018 Daniel Tartavel-jeannot <contact@librepc.com> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + + +MAGEIA_VERSION="cauldron" +ARM_VERSION="aarch64" + +#target plateform (xu3-4 or rpi) +TARGET="rpi-aarch64" + +# URL of the Mageia mirror used to install ( see mirrors.mageia.org ) +MIRROR="http://ftp.free.fr/mirrors/mageia.org/distrib/${MAGEIA_VERSION}/${ARM_VERSION}" +#MIRROR="/mnt/STOCK/mageia/distrib/$MAGEIA_VERSION/$ARM_VERSION" + +#Default user +# ID_USER="pi" +# PASSWORD="raspberry" + +#root password +# ROOT_PWD="piroot" + +#Hostname +HOSTNAME="${TARGET}" + +#Filesystem of boot partitions (default ext4 raspberry pi need vfat) +SEPARATE_BOOT_PARTITION=1 +BOOTFS="vfat" + +#The arguments for the Kernel +BOOT_ARGS='dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 rootwait fsck.repair=1 8250.nr_uarts=1 elevator=deadline cma=256M\@512M audit=0' + +#Path where the raspberry pi firmware is/will be installed +FIRMWARE_PATH="$INSTALL_PATH" +INFORMATION=" +https://elinux.org/RPi_Software +https://www.raspberrypi.org/documentation/configuration/config-txt/boot.md + +https://github.com/raspberrypi/firmware/blob/master/boot/bootcode.bin +https://github.com/raspberrypi/firmware/blob/master/boot/bcm2710-rpi-3-b-plus.dtb + +https://github.com/raspberrypi/firmware/blob/master/boot/fixup.dat +https://github.com/raspberrypi/firmware/blob/master/boot/start.elf +https://github.com/raspberrypi/firmware/blob/master/boot/fixup4.dat #Rpi4 +https://github.com/raspberrypi/firmware/blob/master/boot/start4.elf #Rpi4 + +#Debug (implicitly used with start_debug=1) +https://github.com/raspberrypi/firmware/blob/master/boot/fixup_db.dat +https://github.com/raspberrypi/firmware/blob/master/boot/start_db.elf +https://github.com/raspberrypi/firmware/blob/master/boot/start4db.elf #Rpi4 +https://github.com/raspberrypi/firmware/blob/master/boot/fixup4db.dat #Rpi4 + +#Low GPU Memory (=16MB) +https://github.com/raspberrypi/firmware/blob/master/boot/fixup_cd.dat +https://github.com/raspberrypi/firmware/blob/master/boot/start_cd.elf +https://github.com/raspberrypi/firmware/blob/master/boot/start4cd.elf #Rpi4 +https://github.com/raspberrypi/firmware/blob/master/boot/fixup4cd.dat #Rpi4 + +#Testing versions (eXtra features) (like camera module) (implicitly used with start_x=1 ) : +https://github.com/raspberrypi/firmware/blob/master/boot/fixup_x.dat +https://github.com/raspberrypi/firmware/blob/master/boot/start_x.elf +https://github.com/raspberrypi/firmware/blob/master/boot/start4x.elf #Rpi4 +https://github.com/raspberrypi/firmware/blob/master/boot/fixup4x.dat #Rpi4 +" + +U_BOOT="rpi_arm64" + +DTB="bcm2837-rpi-3-b.dtb bcm2837-rpi-3-a-plus.dtb bcm2837-rpi-3-b.dtb bcm2837-rpi-3-b-plus.dtb bcm2711-rpi-4-b.dtb bcm2837-rpi-cm3-io3.dtb" + +FIRMWARE_DOWNLOAD_URL="https://github.com/raspberrypi/firmware/raw/master/boot/bootcode.bin +https://github.com/raspberrypi/firmware/raw/master/boot/fixup.dat +https://github.com/raspberrypi/firmware/raw/master/boot/fixup4.dat +https://github.com/raspberrypi/firmware/raw/master/boot/start.elf +https://github.com/raspberrypi/firmware/raw/master/boot/start4.elf +https://github.com/raspberrypi/firmware/raw/master/boot/fixup_x.dat +https://github.com/raspberrypi/firmware/raw/master/boot/start_x.elf +https://github.com/raspberrypi/firmware/raw/master/boot/fixup4x.dat +https://github.com/raspberrypi/firmware/raw/master/boot/start4x.elf +" diff --git a/platforms/rpi-aarch64/second_stage_install.sh b/platforms/rpi-aarch64/second_stage_install.sh new file mode 100644 index 0000000..8f6a73f --- /dev/null +++ b/platforms/rpi-aarch64/second_stage_install.sh @@ -0,0 +1,47 @@ +#!/bin/bash + +# Copyright (C) 2017-2018 Daniel Tartavel-jeannot <contact@librepc.com> +# Copyright (C) 2019-2020 Jean-Baptiste Biernacki <j.biernacki@free.fr> +# + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +export ARCH=arm64 + +/usr/bin/chown :shadow /etc/shadow /etc/gshadow /etc/login.defs /etc/pam.d/chage-chfn-chsh /etc/pam.d/chpasswd-newusers /etc/pam.d/system-auth /etc/pam.d/user-group-mod /bin/passwd /bin/chage + +/usr/bin/chown :systemd-journal -R /var/log/journal + +#Install all packages you need +<INSTALL_EXEC> basesystem grub2-efi efibootmgr chrony polkit lockdev rng-tools man openssh-server rfkill wireless-tools bluez wpa_supplicant make rsync binutils ldetect usbutils kernel-desktop-latest u-boot + +#For the wifi : +/sbin/urpmi.update "Nonfree Release" +/sbin/urpmi.update "Nonfree Updates" +<INSTALL_EXEC> --media "Nonfree Release" kernel-firmware-nonfree +<INSTALL_EXEC> --media "Nonfree Updates" kernel-firmware-nonfree + +/usr/bin/sed -i -e 's/GRUB_CMDLINE_LINUX_DEFAULT="\(.*\)"/GRUB_CMDLINE_LINUX_DEFAULT="\1 audit=0"/' /etc/default/grub + +/usr/sbin/grub2-mkconfig -o /boot/grub2/grub.cfg +/usr/sbin/grub2-install --skip-fs-probe --target=arm64-efi --efi-directory=/boot/EFI --force --force-file-id + +/usr/bin/chown :chrony -R /etc/chrony.keys /var/log/chrony +/usr/bin/chown :daemon /etc/wpa_supplicant.conf +/usr/bin/chown :tty /bin/write /bin/wall +/usr/bin/chown :lock /sbin/lockdev +/usr/bin/chown :bin /sbin/traceroute +/usr/bin/chown polkitd /etc/polkit-1/rules.d + +## DO NOT EXIT THE SCRIPT. A second part is automatically added in this script during the process in order to create the default user and set root password. diff --git a/platforms/rpi-aarch64/specialFunctions.sh b/platforms/rpi-aarch64/specialFunctions.sh new file mode 100755 index 0000000..7cecb75 --- /dev/null +++ b/platforms/rpi-aarch64/specialFunctions.sh @@ -0,0 +1,69 @@ +#!/bin/bash + +# Copyright (C) 2017-2018 Daniel Tartavel-jeannot <contact@librepc.com> +# Copyright (C) 2019-2020 Jean-Baptiste Biernacki <j.biernacki@free.fr> +# + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +SFDISK_SCRIPT=",128M,c,*\n,,L,\nwrite\n" + +function preImgCreation() +{ + + title "Download binary blob for Rpi" + for i in ${FIRMWARE_DOWNLOAD_URL}; do + info "Download ${i}" + curl -L -O -J ${i} -s + done + + title "Creating Pi image" + title "Making raspberry pi image" + return 0 +} + +function postPrepareChroot() +{ + #Nothing to do. (Except replacing default function.) + return 0 +} + + +function bunrningBootloader() +{ + #Nothing to do. (Except replacing default function.) + return 0 +} + + +function copyingCustomSystem() +{ + info "copying firmware to ${ARM_BOOT}" + cp -v --preserve=mode "${FIRMWARE_PATH}/start"* "${BOOT}/" + cp -v --preserve=mode "${FIRMWARE_PATH}/fixup"* "${BOOT}/" + cp -v --preserve=mode "${FIRMWARE_PATH}/bootcode.bin"* "${BOOT}/" + + info "copying u-boot binary to ${ARM_BOOT}" + cp --preserve=mode "${BUILD_PATH}/usr/lib/u-boot/${U_BOOT}/u-boot.bin" "${BOOT}/" + + info "copying boot files to ${BOOT}" + cp -a ${CONFIG_PATH}/boot/* "${BOOT}/" + + info "copying dtb files to ${BOOT}" + for f in ${DTB}; do + cp --preserve=mode ${BUILD_PATH}/usr/lib64/linux-*/${f} "${BOOT}/" + done + + return 0 +} |