diff options
| author | Daniel Tartavel <contact@librepc.com> | 2019-09-29 06:50:44 +0200 |
|---|---|---|
| committer | Daniel Tartavel <contact@librepc.com> | 2019-09-29 06:50:44 +0200 |
| commit | 2a82e889e8fc50d72be705ded4a50292c02b38b0 (patch) | |
| tree | e6cd9365a439db56f8f69fc107243185be48a49d /platforms/rpi1/brcmfmac43430-sdio.txt | |
| parent | 22115e7251b4526913948ab0b8780c8419cb6682 (diff) | |
| download | mageia4arm-2a82e889e8fc50d72be705ded4a50292c02b38b0.tar mageia4arm-2a82e889e8fc50d72be705ded4a50292c02b38b0.tar.gz mageia4arm-2a82e889e8fc50d72be705ded4a50292c02b38b0.tar.bz2 mageia4arm-2a82e889e8fc50d72be705ded4a50292c02b38b0.tar.xz mageia4arm-2a82e889e8fc50d72be705ded4a50292c02b38b0.zip | |
added platform dir
Diffstat (limited to 'platforms/rpi1/brcmfmac43430-sdio.txt')
| -rw-r--r-- | platforms/rpi1/brcmfmac43430-sdio.txt | 66 |
1 files changed, 66 insertions, 0 deletions
diff --git a/platforms/rpi1/brcmfmac43430-sdio.txt b/platforms/rpi1/brcmfmac43430-sdio.txt new file mode 100644 index 0000000..ea4f648 --- /dev/null +++ b/platforms/rpi1/brcmfmac43430-sdio.txt @@ -0,0 +1,66 @@ +# NVRAM file for BCM943430WLPTH +# 2.4 GHz, 20 MHz BW mode + +# The following parameter values are just placeholders, need to be updated. +manfid=0x2d0 +prodid=0x0727 +vendid=0x14e4 +devid=0x43e2 +boardtype=0x0727 +boardrev=0x1101 +boardnum=22 +macaddr=00:90:4c:c5:12:38 +sromrev=11 +boardflags=0x00404201 +boardflags3=0x08000000 +xtalfreq=37400 +nocrc=1 +ag0=255 +aa2g=1 +ccode=ALL + +pa0itssit=0x20 +extpagain2g=0 +#PA parameters for 2.4GHz, measured at CHIP OUTPUT +pa2ga0=-168,7161,-820 +AvVmid_c0=0x0,0xc8 +cckpwroffset0=5 + +# PPR params +maxp2ga0=84 +txpwrbckof=6 +cckbw202gpo=0 +legofdmbw202gpo=0x66111111 +mcsbw202gpo=0x77711111 +propbw202gpo=0xdd + +# OFDM IIR : +ofdmdigfilttype=18 +ofdmdigfilttypebe=18 +# PAPD mode: +papdmode=1 +papdvalidtest=1 +pacalidx2g=42 +papdepsoffset=-22 +papdendidx=58 + +# LTECX flags +ltecxmux=0 +ltecxpadnum=0x0102 +ltecxfnsel=0x44 +ltecxgcigpio=0x01 + +il0macaddr=00:90:4c:c5:12:38 +wl0id=0x431b + +deadman_to=0xffffffff +# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG +muxenab=0x1 +# CLDO PWM voltage settings - 0x4 - 1.1 volt +#cldo_pwm=0x4 + +#VCO freq 326.4MHz +spurconfig=0x3 + +edonthd20l=-75 +edoffthd20ul=-80 |