use lower case 'i' in iwconfig/iwpriv/iwspy (#18031)

73 files changed, 577 insertions, 577 deletions

diff --git a/perl-install/network/netconnect.pm b/perl-install/network/netconnect.pm
index 3c4ac84d9..19db78127 100644
--- a/perl-install/network/netconnect.pm
+++ b/perl-install/network/netconnect.pm
@@ -1030,7 +1030,7 @@ packet size disable the scheme. You may also set this parameter to auto, fixed
 or off.")
                              },
                              { label => N("Fragmentation"), val => \$ethntf->{WIRELESS_FRAG}, advanced => 1 },
-                             { label => N("Iwconfig command extra arguments"), val => \$ethntf->{WIRELESS_IWCONFIG}, advanced => 1,
+                             { label => N("iwconfig command extra arguments"), val => \$ethntf->{WIRELESS_IWCONFIG}, advanced => 1,
                                help => N("Here, one can configure some extra wireless parameters such as:
 ap, channel, commit, enc, power, retry, sens, txpower (nick is already set as the hostname).
 
@@ -1038,8 +1038,8 @@ See iwconfig(8) man page for further information."),
                              },
                              { label =>
                                #-PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-                               N("Iwspy command extra arguments"), val => \$ethntf->{WIRELESS_IWSPY}, advanced => 1,
-                               help => N("Iwspy is used to set a list of addresses in a wireless network
+                               N("iwspy command extra arguments"), val => \$ethntf->{WIRELESS_IWSPY}, advanced => 1,
+                               help => N("iwspy is used to set a list of addresses in a wireless network
 interface and to read back quality of link information for each of those.
 
 This information is the same as the one available in /proc/net/wireless :
@@ -1048,11 +1048,11 @@ quality of the link, signal strength and noise level.
 See iwpspy(8) man page for further information."),
  },
                              if_(!$need_rt2x00_iwpriv,
-                                 { label => N("Iwpriv command extra arguments"), val => \$ethntf->{WIRELESS_IWPRIV}, advanced => 1,
-                                   help => N("Iwpriv enable to set up optionals (private) parameters of a wireless network
+                                 { label => N("iwpriv command extra arguments"), val => \$ethntf->{WIRELESS_IWPRIV}, advanced => 1,
+                                   help => N("iwpriv enable to set up optionals (private) parameters of a wireless network
 interface.
 
-Iwpriv deals with parameters and setting specific to each driver (as opposed to
+iwpriv deals with parameters and setting specific to each driver (as opposed to
 iwconfig which deals with generic ones).
 
 In theory, the documentation of each device driver should indicate how to use
diff --git a/perl-install/share/po/DrakX.pot b/perl-install/share/po/DrakX.pot
index 3358ef262..9a5ffd6b9 100644
--- a/perl-install/share/po/DrakX.pot
+++ b/perl-install/share/po/DrakX.pot
@@ -9242,7 +9242,7 @@ msgstr ""
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9257,13 +9257,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9274,16 +9274,16 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless network\n"
+"iwpriv enable to set up optionals (private) parameters of a wireless network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed to\n"
+"iwpriv deals with parameters and setting specific to each driver (as opposed to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
 "In theory, the documentation of each device driver should indicate how to use\n"
diff --git a/perl-install/share/po/af.po b/perl-install/share/po/af.po
index ebe591f84..b1cd9b08c 100644
--- a/perl-install/share/po/af.po
+++ b/perl-install/share/po/af.po
@@ -10837,8 +10837,8 @@ msgstr "Fragmentasie"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Iwconfig program se ekstra argumente"
+msgid "iwconfig command extra arguments"
+msgstr "iwconfig program se ekstra argumente"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -10857,13 +10857,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Iwspy program se ekstra argumente"
+msgid "iwspy command extra arguments"
+msgstr "iwspy program se ekstra argumente"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10871,7 +10871,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy word gebruik om 'n lys op te stel van adresse in 'n draadlose\n"
+"iwspy word gebruik om 'n lys op te stel van adresse in 'n draadlose\n"
 "netwerk asook om die gehalte van elke koppeling van elk te lees.\n"
 "\n"
 "Hierdie inligting kan ook bekom word in /proc/net/wireless :\n"
@@ -10881,17 +10881,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Iwpriv program se ekstra argumente"
+msgid "iwpriv command extra arguments"
+msgstr "iwpriv program se ekstra argumente"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -10901,10 +10901,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv stel u in staat om privaatheidsverstellings aan\n"
+"iwpriv stel u in staat om privaatheidsverstellings aan\n"
 "die draadlose netwerkkoppelvlak aan te bring.\n"
 "\n"
-"Iwpriv maak verstellings aan die spesifieke drywers (in teenstelling met "
+"iwpriv maak verstellings aan die spesifieke drywers (in teenstelling met "
 "iwconfig wat generiese verstellings doen)\n"
 "\n"
 "In teorie, behoort u al die nodige inligting vanaf die drywer\n"
@@ -28254,7 +28254,7 @@ msgstr "Installasie het gefaal!"
 #~ "Bv. ``io=0x300 irq-7''"
 
 #~ msgid ""
-#~ "Iwspy is used to set a list of addresses in a wireless network\n"
+#~ "iwspy is used to set a list of addresses in a wireless network\n"
 #~ "interface and to read back quality of link information for each of "
 #~ "those.\n"
 #~ "\n"
@@ -28263,7 +28263,7 @@ msgstr "Installasie het gefaal!"
 #~ "\n"
 #~ "See iwpspy(8) man page for further information."
 #~ msgstr ""
-#~ "Iwspy word gebruik om 'n lys op te stel van adresse in 'n draadlose\n"
+#~ "iwspy word gebruik om 'n lys op te stel van adresse in 'n draadlose\n"
 #~ "netwerk asook om die gehalte van elke koppeling van elk te lees.\n"
 #~ "\n"
 #~ "Hierdie inligting kan ook bekom word in /proc/net/wireless :\n"
diff --git a/perl-install/share/po/am.po b/perl-install/share/po/am.po
index 4af65be87..c1a964714 100644
--- a/perl-install/share/po/am.po
+++ b/perl-install/share/po/am.po
@@ -9616,7 +9616,7 @@ msgstr ""
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9632,13 +9632,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9649,17 +9649,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/ar.po b/perl-install/share/po/ar.po
index 3038b9586..f4373ba53 100644
--- a/perl-install/share/po/ar.po
+++ b/perl-install/share/po/ar.po
@@ -10995,8 +10995,8 @@ msgstr "مستوى التّجزّء"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "المُعطيات الإضافية لأمر Iwconfig"
+msgid "iwconfig command extra arguments"
+msgstr "المُعطيات الإضافية لأمر iwconfig"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11016,13 +11016,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "المُعطيات الإضافيّة لأمر Iwspy"
+msgid "iwspy command extra arguments"
+msgstr "المُعطيات الإضافيّة لأمر iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11040,17 +11040,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "المُعطيات الإضافيّة لأمر Iwpriv"
+msgid "iwpriv command extra arguments"
+msgstr "المُعطيات الإضافيّة لأمر iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11060,10 +11060,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"يمكنك Iwpriv من إعداد المُعطيات الاختياريّة (الخاصّة) لواجهة الشّبكة\n"
+"يمكنك iwpriv من إعداد المُعطيات الاختياريّة (الخاصّة) لواجهة الشّبكة\n"
 "اللّاسلكيّة.\n"
 "\n"
-"يتعامل Iwpriv مع المُعطيات وتحديد الخواصّ لكل مشغّل (بعكس\n"
+"يتعامل iwpriv مع المُعطيات وتحديد الخواصّ لكل مشغّل (بعكس\n"
 "iwconfig والذي يتعامل مع الأشياء العامّة).\n"
 "\n"
 "نظريّاً، يجب أن يُبيّن مواثقة كلّ مشغّل جهاز كيفيّة استخدام\n"
diff --git a/perl-install/share/po/az.po b/perl-install/share/po/az.po
index 08119bcc6..58c1a2ef6 100644
--- a/perl-install/share/po/az.po
+++ b/perl-install/share/po/az.po
@@ -10965,8 +10965,8 @@ msgstr "Fraqmentasiya"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Iwconfig əmri əlavə arqumentləri"
+msgid "iwconfig command extra arguments"
+msgstr "iwconfig əmri əlavə arqumentləri"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -10981,13 +10981,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Iwspy əmri əlavə arqumentləri"
+msgid "iwspy command extra arguments"
+msgstr "iwspy əmri əlavə arqumentləri"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10998,17 +10998,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Iwpriv əmri əlavə arqumentləri"
+msgid "iwpriv command extra arguments"
+msgstr "iwpriv əmri əlavə arqumentləri"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/be.po b/perl-install/share/po/be.po
index 475a821d0..bcc20e386 100644
--- a/perl-install/share/po/be.po
+++ b/perl-install/share/po/be.po
@@ -9720,7 +9720,7 @@ msgstr "Аўтэнтыфікацыя"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9736,13 +9736,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9753,17 +9753,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/bg.po b/perl-install/share/po/bg.po
index b6e475851..62e84b53a 100644
--- a/perl-install/share/po/bg.po
+++ b/perl-install/share/po/bg.po
@@ -10567,7 +10567,7 @@ msgstr "Игрална станция"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10583,13 +10583,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10600,17 +10600,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/bn.po b/perl-install/share/po/bn.po
index 7a356a31a..8136da312 100644
--- a/perl-install/share/po/bn.po
+++ b/perl-install/share/po/bn.po
@@ -10567,7 +10567,7 @@ msgstr "ফ্রাগমেন্টেশন"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Iwকন্‌ফিগ কমান্ড অতিরিক্ত আর্গুমেন্ট"
 
 #: network/netconnect.pm:1034
@@ -10589,13 +10589,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Iwস্পাই কমান্ড অতিরিক্ত আর্গুমেন্ট"
 
 #: network/netconnect.pm:1042
 #, fuzzy, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10603,23 +10603,23 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy  ব্যবহার করা হয় ওয়্যারলেস নেটওয়ার্ক ইন্টারফেসে একটি ঠিকানার\n"
+"iwspy  ব্যবহার করা হয় ওয়্যারলেস নেটওয়ার্ক ইন্টারফেসে একটি ঠিকানার\n"
 "তালিকা সেট করা এবং তার প্রতিটির সংযোগ এর মান সংক্রান্ত তথ্য পড়ার জন্য।\n"
 "\n"
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Iwpriv কমান্ড অতিরিক্ত আর্গুমেন্ট"
+msgid "iwpriv command extra arguments"
+msgstr "iwpriv কমান্ড অতিরিক্ত আর্গুমেন্ট"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/br.po b/perl-install/share/po/br.po
index c82fdcc65..d55833b9b 100644
--- a/perl-install/share/po/br.po
+++ b/perl-install/share/po/br.po
@@ -9779,7 +9779,7 @@ msgstr ""
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9795,13 +9795,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9812,17 +9812,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/bs.po b/perl-install/share/po/bs.po
index 24670c30d..c7c305256 100644
--- a/perl-install/share/po/bs.po
+++ b/perl-install/share/po/bs.po
@@ -11114,7 +11114,7 @@ msgstr "Fragmentacija"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Dodatni parametri naredbe iwconfig"
 
 #: network/netconnect.pm:1034
@@ -11135,13 +11135,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Dodatni parametri naredbe iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11159,17 +11159,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "Dodatni parametri naredbe iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11179,10 +11179,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv omogućuje podešavanje opcionalnih (privatnih) parametara bežičnog\n"
+"iwpriv omogućuje podešavanje opcionalnih (privatnih) parametara bežičnog\n"
 "mrežnog interfejsa.\n"
 "\n"
-"Iwpriv se bavi parametrima i postavkama specifičnim za svaki drajver (za "
+"iwpriv se bavi parametrima i postavkama specifičnim za svaki drajver (za "
 "razliku\n"
 "od iwconfig koji se bavi opštim parametrima).\n"
 "\n"
diff --git a/perl-install/share/po/ca.po b/perl-install/share/po/ca.po
index 3fb27600d..fd3ef84bb 100644
--- a/perl-install/share/po/ca.po
+++ b/perl-install/share/po/ca.po
@@ -11206,7 +11206,7 @@ msgstr "Fragmentació"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Arguments extra per a lwconfig"
 
 #: network/netconnect.pm:1034
@@ -11222,13 +11222,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Arguments extra per a lwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11239,17 +11239,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "Arguments extra per a lwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/cs.po b/perl-install/share/po/cs.po
index 37a26b5e7..427007b1c 100644
--- a/perl-install/share/po/cs.po
+++ b/perl-install/share/po/cs.po
@@ -11110,8 +11110,8 @@ msgstr "Fragmentace"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "dodatečné parametry příkazu Iwconfig"
+msgid "iwconfig command extra arguments"
+msgstr "dodatečné parametry příkazu iwconfig"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11131,13 +11131,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "dodatečné parametry příkazu lwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11155,17 +11155,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "dodatečné parametry příkazu lwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/cy.po b/perl-install/share/po/cy.po
index 44e39d109..bc6f90b40 100644
--- a/perl-install/share/po/cy.po
+++ b/perl-install/share/po/cy.po
@@ -11066,8 +11066,8 @@ msgstr "Darniad"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "ymresymiadau ychwanegol gorchymyn Iwconfig"
+msgid "iwconfig command extra arguments"
+msgstr "ymresymiadau ychwanegol gorchymyn iwconfig"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11087,13 +11087,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "ymresymiadau ychwanegol gorchymyn lwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11111,17 +11111,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "ymresymiadau ychwanegol gorchymyn Iwpriv"
+msgid "iwpriv command extra arguments"
+msgstr "ymresymiadau ychwanegol gorchymyn iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/da.po b/perl-install/share/po/da.po
index 318e7c486..a85519cac 100644
--- a/perl-install/share/po/da.po
+++ b/perl-install/share/po/da.po
@@ -11026,8 +11026,8 @@ msgstr "Fragmentation"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "ekstra argumenter til Iwconfig kommando"
+msgid "iwconfig command extra arguments"
+msgstr "ekstra argumenter til iwconfig kommando"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11047,13 +11047,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "ekstra argumenter til Iwspy-kommando"
+msgid "iwspy command extra arguments"
+msgstr "ekstra argumenter til iwspy-kommando"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11061,7 +11061,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy bliver brugt til at sætte en liste med adresser i en trådløs "
+"iwspy bliver brugt til at sætte en liste med adresser i en trådløs "
 "netværksgrænseflade\n"
 "og for at læse tilbage kvalitet på en link for hver af dem.\n"
 "\n"
@@ -11073,17 +11073,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "ekstra argumenter til Iwpriv-kommando"
+msgid "iwpriv command extra arguments"
+msgstr "ekstra argumenter til iwpriv-kommando"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11093,10 +11093,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv gør det muligt at opsætte valgfrie (private) parametre for en trådløs "
+"iwpriv gør det muligt at opsætte valgfrie (private) parametre for en trådløs "
 "netværksgrænseflade.\n"
 "\n"
-"Iwpriv hånderer parametre og opsætning specifikt for hver driver (i "
+"iwpriv hånderer parametre og opsætning specifikt for hver driver (i "
 "modsætning til\n"
 "iwconfig som håndterer generelle).\n"
 "\n"
@@ -28629,7 +28629,7 @@ msgstr "Installation mislykkedes"
 #~ "F.eks., ``io=0x300 irq=7''"
 
 #~ msgid ""
-#~ "Iwspy is used to set a list of addresses in a wireless network\n"
+#~ "iwspy is used to set a list of addresses in a wireless network\n"
 #~ "interface and to read back quality of link information for each of "
 #~ "those.\n"
 #~ "\n"
@@ -28638,7 +28638,7 @@ msgstr "Installation mislykkedes"
 #~ "\n"
 #~ "See iwpspy(8) man page for further information."
 #~ msgstr ""
-#~ "Iwspy bliver brugt til at sætte en liste med adresser i en trådløs "
+#~ "iwspy bliver brugt til at sætte en liste med adresser i en trådløs "
 #~ "netværksgrænseflade\n"
 #~ "og for at læse tilbage kvalitet på en link for hver af dem.\n"
 #~ "\n"
diff --git a/perl-install/share/po/de.po b/perl-install/share/po/de.po
index 239754d3f..2557ffa7b 100644
--- a/perl-install/share/po/de.po
+++ b/perl-install/share/po/de.po
@@ -11252,7 +11252,7 @@ msgstr "Fragmentierung"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Zusätzlche Schalter für den Befehl lwconfig"
 
 #: network/netconnect.pm:1034
@@ -11272,13 +11272,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Zusätzliche Schalter für den Befehl lwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11296,17 +11296,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "Extra-Schalter für den Befehl lwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/el.po b/perl-install/share/po/el.po
index fadb5d98d..7b25e0bd7 100644
--- a/perl-install/share/po/el.po
+++ b/perl-install/share/po/el.po
@@ -10789,7 +10789,7 @@ msgstr "Σταθμός παιχνιδιών"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10805,13 +10805,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10822,17 +10822,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/eo.po b/perl-install/share/po/eo.po
index a7173beeb..73a926629 100644
--- a/perl-install/share/po/eo.po
+++ b/perl-install/share/po/eo.po
@@ -9985,7 +9985,7 @@ msgstr "Dokumentaro"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10001,13 +10001,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10018,17 +10018,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/es.po b/perl-install/share/po/es.po
index 781b86d86..b6f6dabbd 100644
--- a/perl-install/share/po/es.po
+++ b/perl-install/share/po/es.po
@@ -11259,7 +11259,7 @@ msgstr "Fragmentación"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Argumentos extra del comando lwconfig"
 
 #: network/netconnect.pm:1034
@@ -11280,13 +11280,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "argumentos extra para el comando lwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11294,7 +11294,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy se usa para ajustar una lista de direcciones en una interfaz de red\n"
+"iwspy se usa para ajustar una lista de direcciones en una interfaz de red\n"
 "inalámbrica y para leer la calidad del vínculo de información para cada una "
 "de ellas.\n"
 "\n"
@@ -11305,17 +11305,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "argumentos extra para el comando Iwpriv"
+msgid "iwpriv command extra arguments"
+msgstr "argumentos extra para el comando iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11325,11 +11325,11 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv permite configurar parámetros (privados) opcionales de una interfaz "
+"iwpriv permite configurar parámetros (privados) opcionales de una interfaz "
 "de red\n"
 "inalámbrica.\n"
 "\n"
-"Iwpriv maneja los parámetros y ajustes específicos para cada controlador (a "
+"iwpriv maneja los parámetros y ajustes específicos para cada controlador (a "
 "diferencia de\n"
 "iwconfig que maneja los parámetros genéricos).\n"
 "\n"
diff --git a/perl-install/share/po/et.po b/perl-install/share/po/et.po
index d83c46c1e..dc18b86f9 100644
--- a/perl-install/share/po/et.po
+++ b/perl-install/share/po/et.po
@@ -11092,7 +11092,7 @@ msgstr "Killustus"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Käsu iwconfig lisaargumendid"
 
 #: network/netconnect.pm:1034
@@ -11113,13 +11113,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Käsu iwspy lisaargumendid"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11137,17 +11137,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "Käsu iwpriv lisaargumendid"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11157,9 +11157,9 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv lubab määrata traadita võrgu liidesele (privaatsed) lisaparameetrid.\n"
+"iwpriv lubab määrata traadita võrgu liidesele (privaatsed) lisaparameetrid.\n"
 "\n"
-"Iwpriv tegeleb iga draiveri parameetrite ja seadistustega eraldi (erinevalt\n"
+"iwpriv tegeleb iga draiveri parameetrite ja seadistustega eraldi (erinevalt\n"
 "iwconfig-ist, mis tegeleb üldiste parameetritega).\n"
 "\n"
 "Teoreetiliselt peaks iga seadmedraiveri dokumentatsioon selgitama liidese\n"
diff --git a/perl-install/share/po/eu.po b/perl-install/share/po/eu.po
index e0fe2571c..c2263569f 100644
--- a/perl-install/share/po/eu.po
+++ b/perl-install/share/po/eu.po
@@ -11163,8 +11163,8 @@ msgstr "Fragmentazioa"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Iwconfig komandoko argumentu estrak"
+msgid "iwconfig command extra arguments"
+msgstr "iwconfig komandoko argumentu estrak"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11184,13 +11184,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Iwspy komandoko argumentu estrak"
+msgid "iwspy command extra arguments"
+msgstr "iwspy komandoko argumentu estrak"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11198,7 +11198,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy erabiltzen da helbide-zerrenda bat ezartzeko haririk gabeko\n"
+"iwspy erabiltzen da helbide-zerrenda bat ezartzeko haririk gabeko\n"
 "sare-interfazean eta horietako bakoitzaren esteka-informazioaren \n"
 "kalitatea irakurtzeko.\n"
 "\n"
@@ -11209,17 +11209,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Iwpriv komandoko argumentu estrak"
+msgid "iwpriv command extra arguments"
+msgstr "iwpriv komandoko argumentu estrak"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11229,11 +11229,11 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv-ek haririk gabeko sare-interfaze batean aukerako parametroak "
+"iwpriv-ek haririk gabeko sare-interfaze batean aukerako parametroak "
 "(pribatuak)\n"
 "ezartzeko aukera ematen du.\n"
 "\n"
-"Iwpriv-ek kontrolatzaile bakoitzaren parametro eta ezarpen espezifikoak "
+"iwpriv-ek kontrolatzaile bakoitzaren parametro eta ezarpen espezifikoak "
 "kudeatzen\n"
 "ditu (iwconfig-ek generikoak kudeatzen dituen bitartean).\n"
 "\n"
diff --git a/perl-install/share/po/fa.po b/perl-install/share/po/fa.po
index 4f40e8529..053860d54 100644
--- a/perl-install/share/po/fa.po
+++ b/perl-install/share/po/fa.po
@@ -11051,7 +11051,7 @@ msgstr "درهم‌ریختگی"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "آرگومان‌های اضافی فرمان iwconfig"
 
 #: network/netconnect.pm:1034
@@ -11072,13 +11072,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "آرگومان‌های اضافی فرمان iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11086,7 +11086,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy برای گذاشتن لیستی از نشانی‌ها در واسط شبکه‌ی بی‌سیم و برای بازخوانی\n"
+"iwspy برای گذاشتن لیستی از نشانی‌ها در واسط شبکه‌ی بی‌سیم و برای بازخوانی\n"
 "کیفیت اطلاعات پیوند هر یک از آنها استفاده می‌شود.\n"
 "\n"
 "این اطلاعات همان است که در /proc/net/wireless وجود دارد :\n"
@@ -11096,17 +11096,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "آرگومان‌های اضافی فرمان Iwpriv"
+msgid "iwpriv command extra arguments"
+msgstr "آرگومان‌های اضافی فرمان iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11116,10 +11116,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv برپاسازی پارامترهای اختیاری (خصوصی) یک واسط شبکه‌ی بی‌سیم را قادر "
+"iwpriv برپاسازی پارامترهای اختیاری (خصوصی) یک واسط شبکه‌ی بی‌سیم را قادر "
 "می‌سازد.\n"
 "\n"
-"Iwpriv با پارامترها و تنظیم مخصوص به هر راه‌انداز سر و کار دارد (در مقابله "
+"iwpriv با پارامترها و تنظیم مخصوص به هر راه‌انداز سر و کار دارد (در مقابله "
 "با \n"
 "iwconfig که با عمومی آنها سر و کار دارد).\n"
 "\n"
diff --git a/perl-install/share/po/fi.po b/perl-install/share/po/fi.po
index 4b6a1414a..dcf3f2d71 100644
--- a/perl-install/share/po/fi.po
+++ b/perl-install/share/po/fi.po
@@ -11223,8 +11223,8 @@ msgstr "Pirstoutuminen"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Komennon Iwconfig ylimääräiset parametrit"
+msgid "iwconfig command extra arguments"
+msgstr "Komennon iwconfig ylimääräiset parametrit"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11244,13 +11244,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Komennon Iwspy ylimääräiset parametrit"
+msgid "iwspy command extra arguments"
+msgstr "Komennon iwspy ylimääräiset parametrit"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11258,7 +11258,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy käytetään asettamaan lista osoitteita langattomaan verkkoliitäntään\n"
+"iwspy käytetään asettamaan lista osoitteita langattomaan verkkoliitäntään\n"
 "ja tarkistamaan jokaisesta yhteyden laatu.\n"
 "\n"
 "Nämä tiedot ovat samat jotka löytyvät /proc/net/wireless:\n"
@@ -11268,17 +11268,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Komennon Iwpriv ylimääräiset parametrit"
+msgid "iwpriv command extra arguments"
+msgstr "Komennon iwpriv ylimääräiset parametrit"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11288,10 +11288,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv mahdollistaa langattoman verkkoliitännän lisäasetusten (private)\n"
+"iwpriv mahdollistaa langattoman verkkoliitännän lisäasetusten (private)\n"
 "asettamisen.\n"
 "\n"
-"Iwpriv käsittelee kullekin ajurille ominaiset parametrit ja asetukset\n"
+"iwpriv käsittelee kullekin ajurille ominaiset parametrit ja asetukset\n"
 "(toisin kuin iwconfig joka käsittelee yleiset asetukset).\n"
 "\n"
 "Teoriassa kunkin laiteajurin dokumentaation tulisi kertoa kuinka käyttää\n"
diff --git a/perl-install/share/po/fr.po b/perl-install/share/po/fr.po
index 8f0d56813..cdb674c3b 100644
--- a/perl-install/share/po/fr.po
+++ b/perl-install/share/po/fr.po
@@ -11317,7 +11317,7 @@ msgstr "Fragmentation"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 "Arguments supplémentaires\n"
 "pour la commande iwconfig"
@@ -11341,7 +11341,7 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 "Arguments supplémentaires\n"
 "pour la commande iwspy"
@@ -11349,7 +11349,7 @@ msgstr ""
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11357,7 +11357,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy est utilisé pour définir une liste d'adresses au niveau d'une\n"
+"iwspy est utilisé pour définir une liste d'adresses au niveau d'une\n"
 "interface réseau sans fil afin d'obtenir la qualité du signal pour\n"
 "chacune d'entre elles.\n"
 "\n"
@@ -11368,7 +11368,7 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 "Arguments supplémentaires\n"
 "pour la commande iwpriv"
@@ -11376,11 +11376,11 @@ msgstr ""
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11390,7 +11390,7 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv permet de spécifier des paramètres optionnels (et privés) d'une "
+"iwpriv permet de spécifier des paramètres optionnels (et privés) d'une "
 "interface réseau sans fil.\n"
 "\n"
 "Impriv permet de manipuler les paramètres et réglages spécifiques à\n"
diff --git a/perl-install/share/po/fur.po b/perl-install/share/po/fur.po
index d7697cec4..2bd793f30 100644
--- a/perl-install/share/po/fur.po
+++ b/perl-install/share/po/fur.po
@@ -9644,7 +9644,7 @@ msgstr ""
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9660,13 +9660,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9677,17 +9677,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/ga.po b/perl-install/share/po/ga.po
index ed6d26124..1bb867a0f 100644
--- a/perl-install/share/po/ga.po
+++ b/perl-install/share/po/ga.po
@@ -9684,7 +9684,7 @@ msgstr "Stáisiún Cluichí"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9700,13 +9700,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9717,17 +9717,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/gl.po b/perl-install/share/po/gl.po
index 202885043..c7e5df03a 100644
--- a/perl-install/share/po/gl.po
+++ b/perl-install/share/po/gl.po
@@ -10882,7 +10882,7 @@ msgstr "Fragmentación"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Argumentos extra do comando iwconfig"
 
 #: network/netconnect.pm:1034
@@ -10903,13 +10903,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Argumentos extra do comando iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10920,17 +10920,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "Argumentos extra do comando iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/he.po b/perl-install/share/po/he.po
index 7d5971878..7af78203c 100644
--- a/perl-install/share/po/he.po
+++ b/perl-install/share/po/he.po
@@ -10432,7 +10432,7 @@ msgstr "פיצוליות"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "משתנים נוספים עבור פקודת lwconfig"
 
 #: network/netconnect.pm:1034
@@ -10453,13 +10453,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "משתנים נוספים עבור פקודת lwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10467,7 +10467,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"הפקודה Iwspyמשמשת להגדרת טווח כתובות ברשת אלחוטית\n"
+"הפקודה iwspyמשמשת להגדרת טווח כתובות ברשת אלחוטית\n"
 "לצורך בדיקת איכות החיבור לכל אחת מכתובות אלו.\n"
 "\n"
 "מידע זה זמין גם ב /proc/net/wireless :\n"
@@ -10477,17 +10477,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "משתנים נוספים עבור פקודת lwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -10497,9 +10497,9 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"הפקודה Iwpriv מאפשרת להגדיר משתנים (פרטיים) של רשת אלחוטית\n"
+"הפקודה iwpriv מאפשרת להגדיר משתנים (פרטיים) של רשת אלחוטית\n"
 "\n"
-"הפקודה Iwpriv מאפשרת להגדיר משתנים ומאפיינים ייחודיים לכל מנהל התקן\n"
+"הפקודה iwpriv מאפשרת להגדיר משתנים ומאפיינים ייחודיים לכל מנהל התקן\n"
 "(בניגוד ל-iwconfig שמגדירה את המאפיינים המשותפים).\n"
 "\n"
 "בתיאוריה, התיעוד של כל מנהל התקן אמור להסביר למה כל משתנה מיועד\n"
diff --git a/perl-install/share/po/hi.po b/perl-install/share/po/hi.po
index cc0d8d152..1de667e73 100644
--- a/perl-install/share/po/hi.po
+++ b/perl-install/share/po/hi.po
@@ -10543,7 +10543,7 @@ msgstr "विखंडीकरण"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "एलडब्लूकॉन्फ़िग कॉमाण्ड के अतिरिक्त प्राचर (आरगूमेन्ट)"
 
 #: network/netconnect.pm:1034
@@ -10564,13 +10564,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "एलडब्लूस्पाई कॉमाण्ड के अतिरिक्त प्राचर"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10588,17 +10588,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "एलडब्लूप्रिव कॉमाण्ड के अतिरिक्त प्राचर"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -10608,11 +10608,11 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"एलडब्लूप्रिव (Iwpriv) एक बेतार नेटवर्क इन्टरफ़ेस के वैकल्पिक (व्यक्तिगत) पैरामीटरों की "
+"एलडब्लूप्रिव (iwpriv) एक बेतार नेटवर्क इन्टरफ़ेस के वैकल्पिक (व्यक्तिगत) पैरामीटरों की "
 "स्थापना को सक्रिय\n"
 "करता है।\n"
 "\n"
-"एलडब्लूप्रिव (Iwpriv) पैरामीटरों के साथ व्यवहार करता है और प्रत्येक चालक के लिए विशिष्ट "
+"एलडब्लूप्रिव (iwpriv) पैरामीटरों के साथ व्यवहार करता है और प्रत्येक चालक के लिए विशिष्ट "
 "समायोजनों को करता है\n"
 "(ना कि आईडब्लूकॉन्फ़िग के जैसे जो कि सामान्य जैसों के साथ व्यवहार करता है।\n"
 "\n"
@@ -27002,7 +27002,7 @@ msgstr "संसाधन असफ़ल"
 #~ "जैसे कि, ``io=0x300 irq=7''"
 
 #~ msgid ""
-#~ "Iwspy is used to set a list of addresses in a wireless network\n"
+#~ "iwspy is used to set a list of addresses in a wireless network\n"
 #~ "interface and to read back quality of link information for each of "
 #~ "those.\n"
 #~ "\n"
diff --git a/perl-install/share/po/hr.po b/perl-install/share/po/hr.po
index cb8042317..8a0943f5f 100644
--- a/perl-install/share/po/hr.po
+++ b/perl-install/share/po/hr.po
@@ -10737,7 +10737,7 @@ msgstr "Igračka radna stanica"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10753,13 +10753,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10770,17 +10770,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/hu.po b/perl-install/share/po/hu.po
index 2eca925e8..b354cca51 100644
--- a/perl-install/share/po/hu.po
+++ b/perl-install/share/po/hu.po
@@ -11214,8 +11214,8 @@ msgstr "Töredezés"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Az Iwconfig program extra argumentumai"
+msgid "iwconfig command extra arguments"
+msgstr "Az iwconfig program extra argumentumai"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11235,13 +11235,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Az Iwspy program extra argumentumai"
+msgid "iwspy command extra arguments"
+msgstr "Az iwspy program extra argumentumai"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11249,7 +11249,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Az Iwspy program funkciója vezeték nélküli hálózati csatolók\n"
+"Az iwspy program funkciója vezeték nélküli hálózati csatolók\n"
 "címlistáinak beállítása és kapcsolatminőségi információk lekérdezése\n"
 "azoktól.\n"
 "\n"
@@ -11260,17 +11260,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Az Iwpriv program extra argumentumai"
+msgid "iwpriv command extra arguments"
+msgstr "Az iwpriv program extra argumentumai"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11280,11 +11280,11 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Az Iwpriv lehetővé teszi egy vezeték nélküli hálózati csatoló\n"
+"Az iwpriv lehetővé teszi egy vezeték nélküli hálózati csatoló\n"
 "opcionális paramétereinek beállítását.\n"
 "\n"
-"Az Iwpriv meghajtónként elkülönülten kezeli a paramétereket és\n"
-"beállításokat (szemben az Iwconfig programmal, amely általános\n"
+"Az iwpriv meghajtónként elkülönülten kezeli a paramétereket és\n"
+"beállításokat (szemben az iwconfig programmal, amely általános\n"
 "beállításokat kezel).\n"
 "\n"
 "Elméletileg az eszközmeghajtók dokumentációja információt tartalmaz\n"
diff --git a/perl-install/share/po/id.po b/perl-install/share/po/id.po
index 02fdc1b25..3bb967c2a 100644
--- a/perl-install/share/po/id.po
+++ b/perl-install/share/po/id.po
@@ -11348,8 +11348,8 @@ msgstr "Fragmentasi"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Argumen tambahan perintah Iwconfig"
+msgid "iwconfig command extra arguments"
+msgstr "Argumen tambahan perintah iwconfig"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11369,13 +11369,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Argumen tambahan perintah Iwspy"
+msgid "iwspy command extra arguments"
+msgstr "Argumen tambahan perintah iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11383,7 +11383,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy digunakan untuk menentukan daftar alamat pada antarmuka\n"
+"iwspy digunakan untuk menentukan daftar alamat pada antarmuka\n"
 "jaringan nirkabel dan membaca kualitas informasi link dari \n"
 "setiap alamat.\n"
 "\n"
@@ -11394,17 +11394,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Argumen tambahan perintah Iwpriv"
+msgid "iwpriv command extra arguments"
+msgstr "Argumen tambahan perintah iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11414,10 +11414,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv aktif untuk menentukan paramater opsional (privat) dari antarmuka\n"
+"iwpriv aktif untuk menentukan paramater opsional (privat) dari antarmuka\n"
 "jaringan nirkabel.\n"
 "\n"
-"Iwpriv berhubungan dengan parameter dan setting khusus untuk setiap driver\n"
+"iwpriv berhubungan dengan parameter dan setting khusus untuk setiap driver\n"
 "(kebalikan dengan iwconfig yang berhubungan dengan setting umum).\n"
 "\n"
 "Secara teori, dokumentasi untuk setiap driver divais harus mengindikasikan\n"
diff --git a/perl-install/share/po/is.po b/perl-install/share/po/is.po
index a638e7392..4f94030ce 100644
--- a/perl-install/share/po/is.po
+++ b/perl-install/share/po/is.po
@@ -11055,7 +11055,7 @@ msgstr "Slitnir-pakkar"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Aukaviðföng fyrir iwconfig"
 
 #: network/netconnect.pm:1034
@@ -11077,13 +11077,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Auka viðföng fyrir iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11091,7 +11091,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy er notað til að setja lista af addressum á þráðlausri nettengingu\n"
+"iwspy er notað til að setja lista af addressum á þráðlausri nettengingu\n"
 "og lesa síðan til baka gæði tengingar við hvern og einn.\n"
 "\n"
 "Þetta eru sömu upplýsingarnar og eru í /proc/net/wireless :\n"
@@ -11101,17 +11101,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Auka viðföng fyrir Iwpriv"
+msgid "iwpriv command extra arguments"
+msgstr "Auka viðföng fyrir iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11121,9 +11121,9 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv er notað til að setja aukaleg (prívat) viðföng á þráðlausu neti\n"
+"iwpriv er notað til að setja aukaleg (prívat) viðföng á þráðlausu neti\n"
 "\n"
-"Iwpriv sér um sérhæfð viðföng og stillingar fyrir hvern rekil (andstætt\n"
+"iwpriv sér um sérhæfð viðföng og stillingar fyrir hvern rekil (andstætt\n"
 "við iwconfig sem sér um þessa almennu).\n"
 "\n"
 "Samkvæmt bókinni ætti hver rekill að segja til um sín mismunandi vistföng,\n"
diff --git a/perl-install/share/po/it.po b/perl-install/share/po/it.po
index 5fadbe458..dc9c1f8b0 100644
--- a/perl-install/share/po/it.po
+++ b/perl-install/share/po/it.po
@@ -11232,7 +11232,7 @@ msgstr "Frammentazione"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 "Argomenti supplementari per il\n"
 "comando iwconfig"
@@ -11255,7 +11255,7 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 "Argomenti supplementari per il\n"
 "comando iwspy"
@@ -11263,7 +11263,7 @@ msgstr ""
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11271,7 +11271,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy è utilizzato per preparare un elenco di indirizzi di una interfaccia "
+"iwspy è utilizzato per preparare un elenco di indirizzi di una interfaccia "
 "di\n"
 "rete wireless e verificare la qualità del collegamento con ognuno di essi.\n"
 "\n"
@@ -11282,7 +11282,7 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 "Argomenti supplementari per\n"
 "il comando iwpriv"
@@ -11290,11 +11290,11 @@ msgstr ""
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11304,10 +11304,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv permette di impostare dei parametri opzionali (privati) per una\n"
+"iwpriv permette di impostare dei parametri opzionali (privati) per una\n"
 "interfaccia di rete wireless\n"
 "\n"
-"Iwpriv gestisce parametri e impostazioni specifici per ogni driver\n"
+"iwpriv gestisce parametri e impostazioni specifici per ogni driver\n"
 "(al contrario di iwconfig che gestisce quelli generali).\n"
 "In teoria, il relativo manuale dovrebbe indicare come utilizzare questi\n"
 "parametri specifici del dispositivo e il loro effetto.\n"
diff --git a/perl-install/share/po/ja.po b/perl-install/share/po/ja.po
index fa3dd15d9..a14678bf6 100644
--- a/perl-install/share/po/ja.po
+++ b/perl-install/share/po/ja.po
@@ -10914,7 +10914,7 @@ msgstr "フラグメンテーション"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "iwconfigコマンドの補助引数"
 
 #: network/netconnect.pm:1034
@@ -10935,13 +10935,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "iwspyコマンドの補助引数"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10959,17 +10959,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "iwprivコマンドの補助引数"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/ko.po b/perl-install/share/po/ko.po
index ac80bedd0..1f6db664c 100644
--- a/perl-install/share/po/ko.po
+++ b/perl-install/share/po/ko.po
@@ -10190,7 +10190,7 @@ msgstr "게임 스테이션"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10206,13 +10206,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10223,17 +10223,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/ky.po b/perl-install/share/po/ky.po
index c4ed8e3cb..3770bf2d0 100644
--- a/perl-install/share/po/ky.po
+++ b/perl-install/share/po/ky.po
@@ -10373,7 +10373,7 @@ msgstr ""
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10389,13 +10389,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10406,17 +10406,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/lt.po b/perl-install/share/po/lt.po
index e75667883..78ab86076 100644
--- a/perl-install/share/po/lt.po
+++ b/perl-install/share/po/lt.po
@@ -10106,7 +10106,7 @@ msgstr "Žaidimų stotis"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10122,13 +10122,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10139,17 +10139,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/ltg.po b/perl-install/share/po/ltg.po
index a9a1db367..9448b0e20 100644
--- a/perl-install/share/po/ltg.po
+++ b/perl-install/share/po/ltg.po
@@ -10292,7 +10292,7 @@ msgstr "Fragmentaceja"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10308,13 +10308,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10325,17 +10325,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/lv.po b/perl-install/share/po/lv.po
index c0325b688..1c75b9cfa 100644
--- a/perl-install/share/po/lv.po
+++ b/perl-install/share/po/lv.po
@@ -10228,7 +10228,7 @@ msgstr "Spēļu dators"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10244,13 +10244,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10261,17 +10261,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/mk.po b/perl-install/share/po/mk.po
index 272a8bd61..332117bbf 100644
--- a/perl-install/share/po/mk.po
+++ b/perl-install/share/po/mk.po
@@ -10925,7 +10925,7 @@ msgstr "Фрагментација"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10941,13 +10941,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10958,17 +10958,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/mn.po b/perl-install/share/po/mn.po
index 34ebc1474..aa19cc15c 100644
--- a/perl-install/share/po/mn.po
+++ b/perl-install/share/po/mn.po

path: root/INSTALL.md

Installation
=======
make install

Modules Requirements
==============
- sys
- imp
- yui
- time
- os
- re
- gettext
- subprocess 
- pydbus
- gi.repository
- hashlib
- gnupg
- threading
- logging
- parted

Reminders
======
Install magiback in /usr/bin
Install org.mageia.magiback.service in /usr/share/dbus-1/system-services/
Install org.mageia.Magiback.conf /etc/dbus-1/system.d/
Install polkit policy file  in /usr/share/polkit-1/actions/
Install raw_format.py in /usr/lib/isodumper as raw_format