# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the isodumper package.
#
# Translators:
# Automatically generated, 2013
# Filip Komar <filip.komar@guest.arnes.si>, 2013
# Filip Komar <filip.komar@guest.arnes.si>, 2013-2016,2018
# Filip Komar <filip.komar@guest.arnes.si>, 2018-2020
# FIRST AUTHOR <EMAIL@ADDRESS>, 2009
msgid ""
msgstr ""
"Project-Id-Version: Mageia\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-06-29 11:20+0200\n"
"PO-Revision-Date: 2020-07-05 01:21+0000\n"
"Last-Translator: Filip Komar <filip.komar@guest.arnes.si>\n"
"Language-Team: Slovenian (http://www.transifex.com/MageiaLinux/mageia/"
"language/sl/)\n"
"Language: sl\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=4; plural=(n%100==1 ? 0 : n%100==2 ? 1 : n%100==3 || n"
"%100==4 ? 2 : 3);\n"

#: backend/raw_write.py:51 backend/raw_write.py:81
msgid "Reading error."
msgstr "Napaka branja."

#: backend/raw_write.py:61
msgid "You don't have permission to write to the device {}"
msgstr "Za pisanje na napravo nimate pravic {}"

#: backend/raw_write.py:90 backend/raw_write.py:104 backend/raw_write.py:113
msgid "Writing error."
msgstr "Napaka pisanja."

#: backend/raw_write.py:122
msgid "Writing terminated"
msgstr "Zapisovanje prekinjeno"

#: backend/raw_write.py:129
msgid "No partition is mounted."
msgstr "Noben razdelek ni priklopljen."

#: backend/raw_write.py:135
msgid "Could not read mtab ! {} {}"
msgstr "Branje datoteke mtab ni možno! {} {}"

#: backend/raw_write.py:138
msgid "Unmounting all partitions of  {}:\n"
msgstr "Odklopi vse razdelke od {}:\n"

#: backend/raw_write.py:141
msgid "Trying to unmount {}...\n"
msgstr "Poskus odklopa {}...\n"

#: backend/raw_write.py:145
msgid "Partition {} is busy"
msgstr "Razdelek {} je zaseden"

#: backend/raw_write.py:147
msgid "Error, umount {} was terminated by signal {}"
msgstr "Napaka, odklop {} je bil prekinjen s signalom {}"

#: backend/raw_write.py:149
msgid "{} successfully unmounted"
msgstr "{} uspešno odklopljen"

#: backend/raw_write.py:151
msgid "Error, umount returned {}"
msgstr "Napaka, odklapljanje je vrnilo {}"

#: backend/raw_write.py:153
msgid "Execution failed: {}"
msgstr "Izvedba spodletela: {}"

#: backend/raw_write.py:181
msgid "Signature file {} not found\n"
msgstr "Datoteka s podpisom {} ni bila najdena\n"

#: backend/raw_write.py:189
msgid "Sum file {} not found\n"
msgstr "Datoteka s podpisom {} ni bila najdena\n"

#: backend/raw_write.py:218 backend/raw_write.py:223
msgid "SHA3 sum: {}"
msgstr "Vsota SHA3: {}"

#: backend/raw_write.py:221
#, python-format
msgid "Invalid signature for %s"
msgstr "Neveljaven podpis za %s"

#: backend/raw_write.py:228
msgid "The {} sum check is OK and the sum is signed"
msgstr "Vsota {} je pravilna in podpisana"

#: backend/raw_write.py:231
msgid "The signature of the sum is false !"
msgstr "Podpis vsote ni pravilen!"

#: backend/raw_write.py:234
msgid "The {} sum check is OK but the signature can't be found"
msgstr "Vsota {} je pravilna, a podpisa ni bilo moč najti"

#: backend/raw_write.py:236
msgid "/!\\The computed and stored sums don't match"
msgstr "/!\\Izračunana in shranjena vsota se ne ujemata"

#: backend/raw_write.py:261 backend/raw_write.py:284 backend/raw_write.py:306
#: backend/raw_write.py:325 backend/raw_write.py:344 backend/raw_write.py:363
msgid "Error while doing persistent partition: "
msgstr "Napaka pri ustvarjanju razdelka za obdržanje sprememb:"

#: backend/raw_write.py:281 backend/raw_write.py:367
msgid "Persistent partition done"
msgstr "Dodan razdelek za obdržanje sprememb"

#: lib/isodumper.py:161
msgid "Target Device: "
msgstr "Ciljna naprava: "

#. I18N these are units for files size
#: lib/isodumper.py:169
msgid "B"
msgstr "B"

#: lib/isodumper.py:169
msgid "GiB"
msgstr "GiB"

#: lib/isodumper.py:169
msgid "KiB"
msgstr "KiB"

#: lib/isodumper.py:169
msgid "MiB"
msgstr "MiB"

#: lib/isodumper.py:169 lib/isodumper.py:173
msgid "TiB"
msgstr "TiB"

#: lib/isodumper.py:187
msgid "Formatting confirmation"
msgstr "Potrditev formatiranja"

#: lib/isodumper.py:192
msgid "The device was formatted successfully."
msgstr "Naprava je bila uspešno formatirana."

#: lib/isodumper.py:196
msgid "An error occurred while creating a partition."
msgstr "Med ustvarjanjem razdelka je prišlo do napake."

#: lib/isodumper.py:200
msgid "Authentication error."
msgstr "Napaka overjanja."

#: lib/isodumper.py:204
msgid "An error occurred."
msgstr "Prišlo je do napake."

#: lib/isodumper.py:225
msgid "Wrote: {}% "
msgstr "Zapisano: {}% "

#: lib/isodumper.py:251
msgid "Backup confirmation"
msgstr "Potrditev varnostnega kopiranja"

#: lib/isodumper.py:251
msgid "Do you want to overwrite the file?"
msgstr "Ali želite prepisati datoteko?"

#: lib/isodumper.py:259
#, python-format
msgid ""
"The destination directory is too small to receive the backup (%s Mb needed)"
msgstr ""
"Ciljna mapa nima dovolj prostora za varnostno kopiranje (potrebno je %s MB)"

#: lib/isodumper.py:265 lib/isodumper.py:560 lib/isodumper.py:736
msgid "Backup to:"
msgstr "Varnostno kopiranje na:"

#: lib/isodumper.py:278
#, python-brace-format
msgid "{source} successfully written to {target}"
msgstr "{source} je bil uspešno zapisan na/v {target}"

#: lib/isodumper.py:300
msgid "The device is too small to contain the ISO file."
msgstr "Izbrana naprava nima dovolj prostora za datoteko odtisa diska."

#: lib/isodumper.py:304
msgid "Writing confirmation"
msgstr "Potrditev pisanja"

#: lib/isodumper.py:307
msgid "The device is bigger than 32 Gbytes. Are you sure you want use it?"
msgstr ""
"Izbrana naprava ima kapaciteto večjo od 32 gigabajtov. Ali jo res želite "
"uporabiti?"

#: lib/isodumper.py:307 lib/isodumper.py:390
msgid "Warning"
msgstr "Opozorilo"

#: lib/isodumper.py:314
#, python-brace-format
msgid "Writing {source} to {target}"
msgstr "Pisanje {source} v/na {target}"

#: lib/isodumper.py:315
msgid " to "
msgstr " na/v "

#: lib/isodumper.py:315
msgid "Executing copy from "
msgstr "Izvajanje kopiranja z "

#: lib/isodumper.py:331
#, python-brace-format
msgid "Image {source} successfully written to {target}"
msgstr "Odtis diska {source} je bil uspešno zapisan na/v {target}"

#: lib/isodumper.py:332
msgid "Bytes written: "
msgstr "Zapisano zlogov: "

#: lib/isodumper.py:333
msgid "Checking "
msgstr "Preverjanje "

#: lib/isodumper.py:351
msgid "Adding persistent partition"
msgstr "Dodajanje razdelka za obdržanje sprememb"

#: lib/isodumper.py:354
msgid "No key for encrypted partition provided. Adding the partition aborted."
msgstr ""
"Ključ za šifriran razdelek ni bil dodan. Dodajanje razdelka je preklicano."

#: lib/isodumper.py:358
msgid "Added encrypted persistent partition"
msgstr "Dodan šifriran razdelek za obdržanje sprememb"

#: lib/isodumper.py:363
msgid "Added persistent partition"
msgstr "Dodan razdelek za obdržanje sprememb"

#: lib/isodumper.py:378
msgid "Success"
msgstr "Uspeh"

#: lib/isodumper.py:378
msgid ""
"The operation completed successfully.\n"
" You are free to unplug it now, a logfile \n"
"(/home/-user- or /root)/.isodumper/isodumper.log will be saved when\n"
" you close the application."
msgstr ""
"Opravilo na ciljni napravi se je uspešno zaključilo.\n"
"Sedaj jo lahko odstranite.\n"
"Ob zaprtju programa se bo v mapo .isodumper v vaši domači\n"
"ali skrbnikovi mapi (/home/uporabnik/ ali /root/ ) zapisala\n"
"dnevniška datoteka isodumper.log."

#: lib/isodumper.py:390
msgid ""
"Writing is in progress. Exiting during writing \n"
"            will make the device or the backup unusable.\n"
"            Are you sure you want to quit during writing?"
msgstr ""
"Trenutno poteka zapisovanje. Takojšen izhod bo\n"
"napravo ali varnostno kopijo pustil v neuporabnem\n"
"stanju. Ali res želite takoj prekiniti pisanje?"

#: lib/isodumper.py:402 lib/isodumper.py:486
msgid "Error"
msgstr "Napaka"

#: lib/isodumper.py:442
msgid "Image "
msgstr "Odtis diska "

#: lib/isodumper.py:446 lib/isodumper.py:508
msgid "IsoDumper"
msgstr "IsoDumper"

#: lib/isodumper.py:446
msgid "Mageia IsoDumper"
msgstr "Mageia IsoDumper"

#: lib/isodumper.py:448
msgid ""
"This GUI program is primarily for safely writing a bootable ISO image to a "
"USB flash drive, an operation devious & potentially hazardous when done by "
"hand. As a bonus, it can also back up the entire previous contents of the "
"flash drive onto the hard disc, and restore the flash drive to its previous "
"state subsequently."
msgstr ""
"Namen program z grafičnim vmesnikom je predvsem varen zapis zagonskih "
"odtisov diskov na napravo USB, kar je z uporabo programa v ukazni vrstici "
"negotovo ali lahko celo nevarno. Dodatno lahko shrani arhiv celotne prejšnje "
"vsebine na trdi disk in ga po potrebi povrne nazaj na napravo."

#: lib/isodumper.py:452
msgid "It gives also a feature for formatting the USB device."
msgstr "Ponuja tudi možnost formatiranja naprave USB."

#: lib/isodumper.py:453
msgid ""
"IsoDumper can be launched either from the menus, or a user console with the "
"command 'isodumper'."
msgstr ""
"Program IsoDumper je možno zagnati tako iz menija kot iz ukazne vrstice z "
"ukazom »isodumper«."

#: lib/isodumper.py:454
msgid ""
"The root password is solicited when this is necessary for the program's "
"operation."
msgstr ""
"Poziv za korensko geslo se pojavi samo takrat, kadar ga kako programsko "
"opravilo potrebuje."

#: lib/isodumper.py:455
msgid ""
"The flash drive can be inserted beforehand or once the program is started. "
"In the latter case, a dialogue will say that there is no flash drive "
"inserted, and allow a 'retry' to find it once it is. <BR />(You may have to "
"close any automatically opened File Manager window)."
msgstr ""
"Bliskovna pomnilniška naprava je lahko vstavljena pred ali po zagonu "
"programa. V drugem primeru se bo pojavilo pogovorno okno z obvestilom, da "
"pomnilniška naprava ni bila zaznana ter možnost ponovne detekcije. <BR /"
">(Mogoče bo treba zapreti kako samodejno odprto okno upravitelja datotek)"

#: lib/isodumper.py:458
msgid ""
"The fields of the main window are as follows:<BR />- Device to work on: the "
"device of the USB flash drive, a drop-down list to choose from.<BR />- Write "
"Image: to choose the source ISO image *.iso (or flash drive backup file *."
"img) to write out.<BR />- Write to device: This button launches the "
"operation - with a prior warning dialogue."
msgstr ""
"Polja glavnega okno sledijo:<BR />- Ciljna naprava: izbrana bliskovna "
"pomnilniška naprava USB s spustnim seznamom za izbiro.<BR />- Zapis odtisa "
"diska: izbira izvornega odtisa diska formata ISO *.iso (ali arhivski odtis "
"bliskovne pomnilniške naprave *.img) za zapis.<BR />- Pisanje na napravo: Ta "
"gumb sproži proces - s predhodnim opozorilnim oknom."

#: lib/isodumper.py:462
msgid ""
"- Add a persistent partition: the remaining space will be used in a new "
"partition where data from the Live system can be written and recovered "
"between sessions."
msgstr ""
"- Dodajanje razdelka za obdržanje sprememb: preostanek prostora bo "
"uporabljen v novem razdelku, kjer se bodo podatki iz živega sistema lahko "
"zapisali in se ohranili med sejami."

#: lib/isodumper.py:463
msgid ""
"- Encrypt: the persistent partition will be encrypted with the key provided "
"in <i>Key</i> field."
msgstr ""
"- Šifriranje: razdelek za obdržanje sprememb bo šifriran s ključem iz polja "
"<i>Ključ</i>."

#: lib/isodumper.py:464
msgid "The operation is shown in the progress bar beneath."
msgstr "Vrstica napredka in opravilo sta vidna spodaj."

#: lib/isodumper.py:465
msgid ""
"- Backup to: define the name and placement of the backup image file. The "
"current flash drive will be backed up to a disc file. Note that the entire "
"flash drive is preserved, regardless of its actual contents; ensure that you "
"have the necessary free disc space (the same size as the USB device). This "
"backup file can be used later to restore the flash drive by selecting it as "
"the source *.img file to write out."
msgstr ""
"- Arhiviranje na: določanje imena in mesta shranjevanja datoteke arhivskega "
"odtisa. Trenutna bliskovna pomnilniška naprava bo arhivirana v to datoteko. "
"Pomembno: ne glede na dejansko vsebino bo arhiv obsegal celotno velikost "
"bliskovne pomnilniške naprave; poskrbite za dovolj prostora na ciljni "
"napravi (trdi disk, ...) . Ta arhiv bo lahko kasneje uporabljen za povrnitev "
"v prejšnje stanje bliskovne pomnilniške naprave z izbiro izvorne datoteke *."
"img file za zapis."

#: lib/isodumper.py:469
msgid "- Backup the device: launch the backup operation."
msgstr "- Arhiviranje vsebine naprave: zagon opravila arhiviranja"

#: lib/isodumper.py:470
msgid ""
"- Format the device: create an unique partition on the entire volume in the "
"specified format in FAT, exFAT, NTFS or ext. You can specify a volume name "
"and the format in a new dialog box."
msgstr ""
"- Formatiranje naprave: ustvarjanje unikatnega razdelka na napravi v "
"izbranem tipu FAT, exFAT, NTFS ali ext. Ime in tip razdelka je možno "
"določiti v novem pogovornem oknu."

#: lib/isodumper.py:486
msgid "There is another instance of Isodumper already running."
msgstr "Okno programa Isodumper je že aktivno."

#: lib/isodumper.py:500
msgid "Choose an image"
msgstr "Izbor odtisa diska"

#: lib/isodumper.py:501
msgid ""
"Warning\n"
"This will destroy all data on the target device,\n"
"        are you sure you want to proceed?\n"
"        If you say ok here, please <b>do not unplug</b>        the device "
"during the following operation."
msgstr ""
"Opozorilo!\n"
"To bo uničilo vse podatke na ciljni napravi.\n"
"Želite vseeno nadaljevati ?\n"
"Če boste potrdili, <b>ne odstranjujte</b>\n"
"naprave med naslednjim opravilom."

#: lib/isodumper.py:535
msgid "Device to work on:"
msgstr "Izbrana naprava:"

#: lib/isodumper.py:539
msgid "Write Image:"
msgstr "Zapis odtisa diska:"

#: lib/isodumper.py:545
msgid "&Write to device"
msgstr "&Zapis na napravo"

#: lib/isodumper.py:550
msgid "Add a persistent partition in the remaining space"
msgstr "Dodajanje razdelka za obdržanje sprememb v preostalem prostoru"

#: lib/isodumper.py:552
msgid "Encrypt partition"
msgstr "Šifriraj razdelek"

#: lib/isodumper.py:553
msgid "Key:"
msgstr "Ključ:"

#: lib/isodumper.py:566
msgid "Backup the device"
msgstr "Arhiviranje vsebine naprave"

#: lib/isodumper.py:569
msgid "Format the device in FAT, exFAT, NTFS or ext:"
msgstr "Formatiranje naprave v datotečnem zapisu FAT, exFAT, NTFS ali ext:"

#: lib/isodumper.py:571
msgid "Format the device"
msgstr "Formatiranje naprave"

#: lib/isodumper.py:574
msgid "Progress"
msgstr "v delu ..."

#: lib/isodumper.py:578
msgid "Report"
msgstr "Poročilo"

#: lib/isodumper.py:581 lib/isodumper.py:691
msgid "Refresh"
msgstr "Osveževanje"

#: lib/isodumper.py:583
msgid "About"
msgstr "O programu"

#: lib/isodumper.py:585
msgid "Help"
msgstr "Pomoč"

#: lib/isodumper.py:587
msgid "Quit"
msgstr "Končaj"

#: lib/isodumper.py:593
msgid "UDisks2 is not available on your system"
msgstr "Storitev UDisks2 ni na voljo na vašem sistemu"

#: lib/isodumper.py:609
msgid "Label for the device:"
msgstr "Oznaka naprave:"

#: lib/isodumper.py:613
msgid "FAT 32 (Windows)"
msgstr "FAT 32 (Windows)"

#: lib/isodumper.py:615
msgid "exFAT (Windows)"
msgstr "exFAT (Windows)"

#: lib/isodumper.py:617
msgid "NTFS (Windows)"
msgstr "NTFS (Windows)"

#: lib/isodumper.py:619
msgid "ext4 (Linux)"
msgstr "ext4 (Linux)"

#: lib/isodumper.py:621
msgid "Execute"
msgstr "Izvajanje"

#: lib/isodumper.py:622 lib/isodumper.py:692
msgid "Cancel"
msgstr "Prekliči"

#: lib/isodumper.py:663
msgid "OK"
msgstr "V redu"

#: lib/isodumper.py:673
msgid "Yes"
msgstr "Da"

#: lib/isodumper.py:674
msgid "No"
msgstr "Ne"

#: lib/isodumper.py:682
msgid "A tool for writing ISO images to  a device"
msgstr "Orodje za zapis odtisov diskov na napravo"

#: lib/isodumper.py:682
msgid "Oliver Grawert<BR />Papoteur<BR />Pictures : Timothée Giet"
msgstr "Oliver Grawert<BR />Papoteur<BR />Slike : Timothée Giet"

#: lib/isodumper.py:690
msgid ""
"Warning\n"
"No target devices were found.\n"
"You need to plug in a USB Key to which the image can be written."
msgstr ""
"Opozorilo\n"
"Nobene ciljne naprave ni bilo mogoče najti.\n"
"Vstavite ključ USB, na katerega lahko zapišete odtis diska."

#: polkit/org.mageia.isodumper.policy.in.h:1
msgid "Isodumper requesting write access"
msgstr "Program Isodumper zahteva pisalni dostop"

#: polkit/org.mageia.isodumper.policy.in.h:2
msgid "Manatools requesting write access"
msgstr "Program Manatools zahteva pisalni dostop"

#: share/applications/format-usb.desktop.in.h:1
msgid "A GUI tool to format USB sticks"
msgstr "Orodje z grafičnim uporabniškim vmesnikom za formatiranje ključkov USB"

#: share/applications/isodumper.desktop.in.h:1
msgid "A GUI tool to write .img and .iso files to USB sticks"
msgstr ""
"Orodje z grafičnim uporabniškim vmesnikom za zapis datotek odtisa diska "
"npr.: .img in .iso na ključek USB"