# Polish translation for isodumper package.
# Copyright (C) 2013 THE isodumper'S COPYRIGHT HOLDER
# This file is distributed under the same license as the isodumper package.
#
# Translators:
# Automatically generated, 2013
# Daniel Napora <napcok@gmail.com>, 2013-2015
# FIRST AUTHOR <EMAIL@ADDRESS>, 2008
# Tatsunoko <violamade@gmail.com>, 2014
# Tatsunoko <violamade@gmail.com>, 2014
msgid ""
msgstr ""
"Project-Id-Version: isodumper\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2016-07-18 11:44+0200\n"
"PO-Revision-Date: 2015-05-01 10:33+0000\n"
"Last-Translator: Daniel Napora <napcok@gmail.com>\n"
"Language-Team: Polish (http://www.transifex.com/projects/p/mageia/language/"
"pl/)\n"
"Language: pl\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
"|| n%100>=20) ? 1 : 2);\n"

#: lib/isodumper.py:123
#, python-format
msgid "%r not known to UDisks2"
msgstr ""

#: lib/isodumper.py:190
msgid "Mb"
msgstr "Mb"

#: lib/isodumper.py:210
msgid "Target Device: "
msgstr "Docelowe urządzenie: "

#: lib/isodumper.py:232
msgid "Backup to: "
msgstr ""

#: lib/isodumper.py:236
msgid "Formatting confirmation"
msgstr ""

#: lib/isodumper.py:241
msgid "The device was formatted successfully."
msgstr "Sukces. Urządzenie zostało sformatowane."

#: lib/isodumper.py:245
msgid "An error occurred while creating a partition."
msgstr "Wystąpił błąd podczas tworzenia partycji."

#: lib/isodumper.py:249
msgid "Authentication error."
msgstr "Błąd uwierzytelniania."

#: lib/isodumper.py:253
msgid "An error occurred."
msgstr "Wystąpił błąd."

#: lib/isodumper.py:290
msgid "Backup confirmation"
msgstr ""

#: lib/isodumper.py:290
msgid "Do you want to overwrite the file?"
msgstr "Czy chcesz nadpisać plik?"

#: lib/isodumper.py:298
#, python-format
msgid ""
"The destination directory is too small to receive the backup (%s Mb needed)"
msgstr ""
"Brak miejsca na wykonanie kopii zapasowej w katalogu docelowym (potrzebne %s "
"Mb)"

#: lib/isodumper.py:304 lib/isodumper.py:666
msgid "Backup to:"
msgstr ""

#: lib/isodumper.py:324
msgid "The device is too small to contain the ISO file."
msgstr "Urządzenie jest za małe aby pomieścić obraz ISO."

#: lib/isodumper.py:328
msgid "Writing confirmation"
msgstr ""

#: lib/isodumper.py:331
msgid "The device is bigger than 32 Gbytes. Are you sure you want use it?"
msgstr "Urządzenie jest większe niż 32 Gb. Czy na pewno chcesz go użyć?"

#: lib/isodumper.py:331 lib/isodumper.py:508
msgid "Warning"
msgstr ""

#: lib/isodumper.py:356
msgid "Unmounting all partitions of "
msgstr "Odmontowywanie wszystkich partycji na "

#: lib/isodumper.py:358
msgid "Trying to unmount "
msgstr "Próba odmontowania "

#: lib/isodumper.py:362
#, python-format
msgid "Partition %s is busy"
msgstr ""

#: lib/isodumper.py:366
msgid " was terminated by signal "
msgstr " został przerwany przez sygnał "

#: lib/isodumper.py:366 lib/isodumper.py:372
msgid "Error, umount "
msgstr "Błąd odmontowywnia "

#: lib/isodumper.py:370
msgid " successfully unmounted"
msgstr " odmontowanie pomyślne"

#: lib/isodumper.py:372
msgid " returned "
msgstr " zwrócił "

#: lib/isodumper.py:376
msgid "Execution failed: "
msgstr "Wykonanie nie powiodło się: : "

#: lib/isodumper.py:385
msgid "Could not read mtab !"
msgstr "Błąd odczytu mtab!"

#: lib/isodumper.py:395 lib/isodumper.py:422
msgid "Reading error."
msgstr "Błąd odczytu."

#: lib/isodumper.py:403
msgid "You don't have permission to write to the device"
msgstr ""

#: lib/isodumper.py:408 lib/isodumper.py:409
msgid " to "
msgstr " do "

#: lib/isodumper.py:408
msgid "Writing "
msgstr "Zapisywanie "

#: lib/isodumper.py:409
msgid "Executing copy from "
msgstr "Wykonywanie kopii z "

#: lib/isodumper.py:429 lib/isodumper.py:443 lib/isodumper.py:453
msgid "Writing error."
msgstr "Błąd zapisu."

#: lib/isodumper.py:436
msgid "Wrote: "
msgstr "Zapisano: "

#: lib/isodumper.py:448
msgid " successfully written to "
msgstr " zapisany z powodzeniem do "

#: lib/isodumper.py:448 lib/isodumper.py:567
msgid "Image "
msgstr "Obraz "

#: lib/isodumper.py:449
msgid "Bytes written: "
msgstr "Zapisane bity: "

#: lib/isodumper.py:461
msgid "Checking "
msgstr "Sprawdzanie"

#: lib/isodumper.py:486
msgid "SHA1 sum: "
msgstr "Suma SHA1:"

#: lib/isodumper.py:487
msgid "MD5  sum: "
msgstr "Suma MD5:"

#: lib/isodumper.py:496
msgid "Success"
msgstr ""

#: lib/isodumper.py:496
msgid ""
"The operation completed successfully.\n"
" You are free to unplug it now, a logfile \n"
"(/home/-user- or /root)/.isodumper/isodumper.log will be saved when\n"
" you close the application."
msgstr ""

#: lib/isodumper.py:508
msgid ""
"Writing is in progress. Exiting during writing \n"
"            will make the device or the backup unusable.\n"
"            Are you sure you want to quit during writing?"
msgstr ""

#: lib/isodumper.py:520
msgid "Error"
msgstr ""

#: lib/isodumper.py:571 lib/isodumper.py:625
msgid "IsoDumper"
msgstr "IsoDumper"

#: lib/isodumper.py:571
msgid ""
"Mageia IsoDumper<BR />----------------<BR />This GUI program is primarily "
"for safely writing a bootable ISO image to a USB flash drive, an operation "
"devious & potentially hazardous when done by hand. As a bonus, it can also "
"back up theentire previous<BR />contents of the flash drive onto the hard "
"disc, and restore the flash drive to its previous state subsequently.<BR /"
">It gives also a feature for formatting the USB device.<BR /><BR />IsoDumper "
"can be launched either from the menus, or a user or root console with the "
"command 'isodumper'.<BR />For normal users, the root password is solicited; "
"this is necessary for the program's operation. <BR />The flash drive can be "
"inserted beforehand or once the program is started. In the latter case, a "
"dialogue will say that there is no flash drive inserted, and allow a 'retry' "
"to find it once it is. <BR />(You may have to close any automatically opened "
"File Manager window).<BR /><BR />The fields of the main window are as "
"follows:<BR />- Device to work on: the device of the USB flash drive, a drop-"
"down list to choose from.<BR />- Write Image: to choose the source ISO image "
"*.iso (or flash drive backup file *.img) to write out.<BR />- Write to "
"device: This button launches the operation - with a prior warning dialogue. "
"<BR />The operation is shown in the progress bar beneath.<BR />- Backup to: "
"define the name and placement of the backup image file. The current flash "
"drive will be backed up to a disc file. Note that the entire flash drive is "
"preserved, regardless of its actual contents; ensure that you have the "
"necessary free disc space (the same size as the USB device). This backup "
"file can be used later to restore the flash drive by selecting it as the "
"source *.img file to write out.<BR />- Backup the device: launch the backup "
"operation.<BR />- Format the device:  create an unique partition on the "
"entire volume in the specified format in FAT, NTFS or ext. You can specify a "
"volume name and the format in a new dialog box.<BR />"
msgstr ""

#: lib/isodumper.py:617
msgid "Choose an image"
msgstr ""

#: lib/isodumper.py:618
msgid ""
"Warning\n"
"This will destroy all data on the target device,\n"
"        are you sure you want to proceed?\n"
"        If you say ok here, please <b>do not unplug</b>        the device "
"during the following operation."
msgstr ""

#: lib/isodumper.py:653
msgid "Device to work on:"
msgstr "Urządzenie:"

#: lib/isodumper.py:657
msgid "Write Image:"
msgstr "Obraz do zapisu:"

#: lib/isodumper.py:663
msgid "&Write to device"
msgstr ""

#: lib/isodumper.py:672
msgid "&Backup the device"
msgstr ""

#: lib/isodumper.py:676
msgid "Format the device in FAT, NTFS or ext:"
msgstr "Formatuj urządzenie jako FAT, NTFS lub ext:"

#: lib/isodumper.py:678
msgid "&Format the device"
msgstr ""

#: lib/isodumper.py:682
msgid "Progress"
msgstr ""

#: lib/isodumper.py:686
msgid "Report"
msgstr ""

#: lib/isodumper.py:691 lib/isodumper.py:799
msgid "&Refresh"
msgstr ""

#: lib/isodumper.py:693
msgid "&About"
msgstr ""

#: lib/isodumper.py:695
msgid "&Help"
msgstr ""

#: lib/isodumper.py:697
msgid "&Quit"
msgstr ""

#: lib/isodumper.py:703
msgid "UDisks2 is not available on your system"
msgstr "UDisks2 nie jest dostępny w twoim systemie"

#: lib/isodumper.py:722
msgid "Label for the device:"
msgstr "Etykieta dla urządzenia:"

#: lib/isodumper.py:726
msgid "FAT 32 (Windows)"
msgstr "FAT 32 (Windows)"

#: lib/isodumper.py:728
msgid "NTFS (Windows)"
msgstr "NTFS (Windows)"

#: lib/isodumper.py:730
msgid "ext4 (Linux)"
msgstr "ext4 (Linux)"

#: lib/isodumper.py:732
msgid "Execute"
msgstr ""

#: lib/isodumper.py:733 lib/isodumper.py:800
msgid "Cancel"
msgstr ""

#: lib/isodumper.py:790
msgid "A tool for writing ISO images to  a device"
msgstr ""

#: lib/isodumper.py:798
msgid ""
"Warning\n"
"No target devices were found.\n"
"You need to plug in a USB Key to which the image can be written."
msgstr ""

#: polkit/org.mageia.isodumper.policy.in.h:1
msgid "Run Isodumper"
msgstr "Uruchom Isodumper"

#: polkit/org.mageia.isodumper.policy.in.h:2
msgid "Authentication is required to run Isodumper"
msgstr "Isodumper - wymagane uwierzytelnianie"

#: share/applications/isodumper.desktop.in.h:1
msgid "A GUI tool to write .img and .iso files to USB sticks"
msgstr ""

#~ msgid ""
#~ "<b>Success</b>\n"
#~ " The operation was successfully performed.\n"
#~ " \n"
#~ " You are free to unplug it now, a logfile\n"
#~ " (/home/-user- or /root)/.isodumper/isodumper.log will be saved when\n"
#~ " you close the application."
#~ msgstr ""
#~ "<b>Sukces</b>\n"
#~ " Operacja została zakończona powodzeniem.\n"
#~ " \n"
#~ " Teraz możesz odłączyć urządzenie, plik logu isodumper.log \n"
#~ " zostanie zapisany w twoim katalogu domowym ~/.isodumper/."

#~ msgid ""
#~ "<b>Warning</b>\n"
#~ " No target devices were found. \n"
#~ "\n"
#~ " You need to plug in a USB Key\n"
#~ " to which the image can be written."
#~ msgstr ""
#~ "<b>Ostrzeżenie</b>\n"
#~ " Nie znaleziono docelowego urządzenia. \n"
#~ "\n"
#~ " Podłącz klucz USB\n"
#~ " na którym chcesz zapisać obraz."

#~ msgid "Details"
#~ msgstr "Szczegóły"

#~ msgid "Format the device"
#~ msgstr "Formatuj urządzenie"

#~ msgid "Choose the format. The device will be formatted in one partition"
#~ msgstr ""
#~ "Wybierz format. Urządzenie zostanie sformatowane jako jedna partycja"

#~ msgid "Backup the device"
#~ msgstr "Utwórz kopię zapasową."

#~ msgid "Select a folder in which to write the backup image"
#~ msgstr "Wybierz katalog do zapisywania kopii zapasowych"

#~ msgid "(None)"
#~ msgstr "(Żaden)"

#~ msgid "Create a backup of the device as image to restore it later"
#~ msgstr "Utwórz kopię zapasową urządzenia jako obraz - by móc ją przywrócić"

#~ msgid "Write to device"
#~ msgstr "Zapisz na urządzeniu"

#~ msgid "Select Image"
#~ msgstr "Wybierz obraz"

#~ msgid "Select an image file to be written to the device"
#~ msgstr "Wybierz obraz do zapisu na urządzeniu"

#~ msgid "Select target device to write the image to"
#~ msgstr "Wybierz urządzenie docelowe"

#~ msgid "Isodumper - Help"
#~ msgstr "Isodumper - Pomoc"

#~ msgid "Only for Linux systems"
#~ msgstr "Tylko dla systemów Linux"

#~ msgid "To handle files bigger than 4Gb"
#~ msgstr "Do obsługi plików powyżej 4Gb"

#~ msgid "The standard. The size of files are limited to 4Gb"
#~ msgstr "Standard. Wielkość pliku ograniczona do 4Gb."

#~ msgid ""
#~ "<b>Error</b>\n"
#~ " Something went wrong, please see the details\n"
#~ " window for the exact error.\n"
#~ "\n"
#~ " The application will be closed with this window, and a logfile\n"
#~ " (/home/-user- or /root)/.isodumper/isodumper.log will be saved."
#~ msgstr ""
#~ "<b>Błąd</b>\n"
#~ "Coś poszło nie tak, sprawdź okno szczegółów, aby zobaczyć opis błędu.\n"
#~ "\n"
#~ " Program zostanie zamknięty, a plik logu isodumper.log zostanie zapisany "
#~ "w twoim katalogu domowym ~/.isodumper"

#~ msgid ""
#~ "<b>Warning</b>\n"
#~ " This will <b>destroy all data</b> on the target\n"
#~ " device, are you sure you want to proceed ?\n"
#~ "\n"
#~ " If you say ok here, please <b>do not unplug</b>\n"
#~ " the device during the following operation."
#~ msgstr ""
#~ "<b>Ostrzeżenie</b>\n"
#~ " Operacja <b>usunie wszystkie dane</b> na urządzeniu\n"
#~ " docelowym, Czy jesteś pewien że chcesz kontynuować ?\n"
#~ "\n"
#~ " Jeśli się zgodzisz, <b>nie odłączaj urządzenia</b>\n"
#~ " do ukończenia operacji."

#~ msgid "Select"
#~ msgstr "Wybierz"

#~ msgid ""
#~ "A tool for writing ISO images on a USB stick. It's a fork of usb-"
#~ "imagewriter."
#~ msgstr ""
#~ "Narzędzie do zapisu obrazów ISO na pamięć USB. Jest rozwidleniem usb-"
#~ "imagewritera."

#~ msgid ""
#~ "Writing is in progress. Exiting during writing will occur that the device "
#~ "or the backup will be unusable.\n"
#~ "Are you sure you want to quit during writing?"
#~ msgstr ""
#~ "Zapisywanie w toku. Przerwanie podczas zapisu może spowodować, że "
#~ "urządzenie lub kopia zapasowa nie będzie się nadawać do użytku.\n"
#~ "Czy na pewno chcesz przerwać?"

#~ msgid "A GUI tool to write .img and .iso files to USB Keys"
#~ msgstr "Narzędzie do zapisywania obrazów .img oraz .iso na USB"

#~ msgid "You have not the rights for writing on the device"
#~ msgstr "Nie posiadasz uprawnień do zapisu na urządzeniu."

#~ msgid "Backup in:"
#~ msgstr "Kopia zapasowa w:"

#~ msgid "Backup in: "
#~ msgstr "Kopia zapasowa w:"