# Italian translation of isodumper.
# Copyright (C) 2013 THE isodumper'S COPYRIGHT HOLDER
# This file is distributed under the same license as the isodumper package.
#
# Translators:
# killer1987 <marcello.anni@alice.it>, 2013
# killer1987 <marcello.anni@alice.it>, 2013-2014
# killer1987 <marcello.anni@alice.it>, 2013
msgid ""
msgstr ""
"Project-Id-Version: isodumper\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2016-04-10 11:46+0200\n"
"PO-Revision-Date: 2014-09-09 15:41+0000\n"
"Last-Translator: killer1987 <marcello.anni@alice.it>\n"
"Language-Team: Italian (http://www.transifex.com/projects/p/mageia/language/"
"it/)\n"
"Language: it\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#: lib/isodumper.py:123
#, python-format
msgid "%r not known to UDisks2"
msgstr ""

#: lib/isodumper.py:189
msgid "Mb"
msgstr "Mb"

#: lib/isodumper.py:209
msgid "Target Device: "
msgstr "Dispositivo target: "

#: lib/isodumper.py:231
msgid "Backup to: "
msgstr "Crea una copia di sicurezza in:"

#: lib/isodumper.py:235
msgid "Formatting confirmation"
msgstr ""

#: lib/isodumper.py:240
msgid "The device was formatted successfully."
msgstr "Il dispositivo è stato formattato con successo."

#: lib/isodumper.py:244
msgid "An error occurred while creating a partition."
msgstr "Si è verificato un errore durante la creazione di una partizione."

#: lib/isodumper.py:248
msgid "Authentication error."
msgstr "Errore di autenticazione."

#: lib/isodumper.py:252
msgid "An error occurred."
msgstr "Si è verificato un errore."

#: lib/isodumper.py:289
msgid "Backup confirmation"
msgstr ""

#: lib/isodumper.py:289
msgid "Do you want to overwrite the file?"
msgstr ""

#: lib/isodumper.py:297
#, python-format
msgid ""
"The destination directory is too small to receive the backup (%s Mb needed)"
msgstr ""

#: lib/isodumper.py:303 lib/isodumper.py:652
msgid "Backup to:"
msgstr "Copia di sicurezza in:"

#: lib/isodumper.py:323
msgid "The device is too small to contain the ISO file."
msgstr "Il dispositivo è troppo piccolo per contenere il file ISO."

#: lib/isodumper.py:327
msgid "Writing confirmation"
msgstr ""

#: lib/isodumper.py:330
msgid "The device is bigger than 32 Gbytes. Are you sure you want use it?"
msgstr "Il dispositivo è più grande di 32 Gbytes. Sei sicuro di volerlo usare?"

#: lib/isodumper.py:330 lib/isodumper.py:507
msgid "Warning"
msgstr ""

#: lib/isodumper.py:355
msgid "Unmounting all partitions of "
msgstr "Smontaggio delle partizioni di "

#: lib/isodumper.py:357
msgid "Trying to unmount "
msgstr "Smontaggio in corso "

#: lib/isodumper.py:361
#, python-format
msgid "Partition %s is busy"
msgstr ""

#: lib/isodumper.py:365
msgid " was terminated by signal "
msgstr " è stato terminato con il segnale "

#: lib/isodumper.py:365 lib/isodumper.py:371
msgid "Error, umount "
msgstr "Errrore, smontaggio "

#: lib/isodumper.py:369
msgid " successfully unmounted"
msgstr " smontato con successo"

#: lib/isodumper.py:371
msgid " returned "
msgstr " ha restituito "

#: lib/isodumper.py:375
msgid "Execution failed: "
msgstr "Esecuzione fallita: "

#: lib/isodumper.py:384
msgid "Could not read mtab !"
msgstr "Impossibile leggere mtab!"

#: lib/isodumper.py:394 lib/isodumper.py:421
msgid "Reading error."
msgstr "Errore di lettura."

#: lib/isodumper.py:402
msgid "You don't have permission to write to the device"
msgstr "Non hai i permessi per scrivere nel dispositivo"

#: lib/isodumper.py:407 lib/isodumper.py:408
msgid " to "
msgstr " su "

#: lib/isodumper.py:407
msgid "Writing "
msgstr "Scrittura "

#: lib/isodumper.py:408
msgid "Executing copy from "
msgstr "Esecuzione della copia da "

#: lib/isodumper.py:428 lib/isodumper.py:442 lib/isodumper.py:452
msgid "Writing error."
msgstr "Errore di scrittura."

#: lib/isodumper.py:435
msgid "Wrote: "
msgstr "Scritto: "

#: lib/isodumper.py:447
msgid " successfully written to "
msgstr " scritto con successo su "

#: lib/isodumper.py:447 lib/isodumper.py:566
msgid "Image "
msgstr "Immagine "

#: lib/isodumper.py:448
msgid "Bytes written: "
msgstr "Bytes scritti: "

#: lib/isodumper.py:460
msgid "Checking "
msgstr ""

#: lib/isodumper.py:485
msgid "SHA1 sum: "
msgstr ""

#: lib/isodumper.py:486
msgid "MD5  sum: "
msgstr ""

#: lib/isodumper.py:495
msgid "Success"
msgstr ""

#: lib/isodumper.py:495
msgid ""
"The operation completed successfully.\n"
" You are free to unplug it now, a log isodumper.log\n"
" of the operation will be saved in your homedir/.isodumper/ when\n"
" you close the application."
msgstr ""

#: lib/isodumper.py:507
msgid ""
"Writing is in progress. Exiting during writing \n"
"            will make the device or the backup unusable.\n"
"            Are you sure you want to quit during writing?"
msgstr ""

#: lib/isodumper.py:519
msgid "Error"
msgstr ""

#: lib/isodumper.py:570 lib/isodumper.py:611
msgid "IsoDumper"
msgstr "IsoDumper"

#: lib/isodumper.py:570
msgid ""
"Mageia IsoDumper<BR />----------------<BR />This GUI program is primarily "
"for safely writing a bootable ISO image to a USB flash drive, <BR />an "
"operation devious & potentially hazardous when done by hand. As a bonus, it "
"can also back up the entire previous<BR />contents of the flash drive onto "
"the hard disc, and restore the flash drive to its previous state "
"subsequently.<BR /> It gives also a feature for formatting the USB device."
"<BR /><BR />IsoDumper can be launched either from the menus, or a user or "
"root console with the command 'isodumper'.<BR />For normal users, the root "
"password is solicited; this is necessary for the program's operation. <BR /"
">The flash drive can be inserted beforehand or once the program is started. "
"In the latter case, a dialogue will say <BR />that there is no flash drive "
"inserted, and allow a 'retry' to find it once it is. <BR />(You may have to "
"close any automatically opened File Manager window).<BR /><BR />The fields "
"of the main window are as follows:<BR />- Device to work on: the device of "
"the USB flash drive, a drop-down list to choose from.<BR />- Write Image: to "
"choose the source ISO image *.iso (or flash drive backup file *.img) to "
"write out.<BR />- Write to device: This button launches the operation - with "
"a prior warning dialogue. <BR />The operation is shown in the progress bar "
"beneath.<BR />- Backup to: define the name and placement of the backup image "
"file. The current flash <BR />drive will be backed up to a disc file. Note "
"that the entire flash drive is preserved, regardless of its actual contents;"
"<BR /> ensure that you have the necessary free disc space (the same size as "
"the USB device). <BR />This backup file can be used later to restore the "
"flash drive by selecting it as the source *.img file to write out.<BR />- "
"Backup the device: launch the backup operation.<BR />- Format the device:  "
"create an unique partition on the entire volume in the specified format in "
"FAT, <BR />NTFS or ext. You can specify a volume name and the format in a "
"new dialog box.<BR />"
msgstr ""

#: lib/isodumper.py:603
msgid "Choose an image"
msgstr ""

#: lib/isodumper.py:604
msgid ""
"Warning\n"
"This will destroy all data on the target device,\n"
"        are you sure you want to proceed?\n"
"        If you say ok here, please <b>do not unplug</b>        the device "
"during the following operation."
msgstr ""

#: lib/isodumper.py:639
msgid "Device to work on:"
msgstr "Dispositivo sul quale scrivere:"

#: lib/isodumper.py:643
msgid "Write Image:"
msgstr "Scrivi immagine:"

#: lib/isodumper.py:649
msgid "&Write to device"
msgstr "Scrivi sul dispositivo"

#: lib/isodumper.py:658
msgid "&Backup the device"
msgstr ""

#: lib/isodumper.py:662
msgid "Format the device in FAT, NTFS or ext:"
msgstr ""

#: lib/isodumper.py:664
msgid "&Format the device"
msgstr "Formatta il dispositivo"

#: lib/isodumper.py:677 lib/isodumper.py:785
msgid "&Refresh"
msgstr ""

#: lib/isodumper.py:679
msgid "&About"
msgstr ""

#: lib/isodumper.py:681
msgid "&Help"
msgstr ""

#: lib/isodumper.py:683
msgid "&Quit"
msgstr ""

#: lib/isodumper.py:689
msgid "UDisks2 is not available on your system"
msgstr ""

#: lib/isodumper.py:708
msgid "Label for the device:"
msgstr "Etichetta per il dispositivo:"

#: lib/isodumper.py:712
msgid "FAT 32 (Windows)"
msgstr "FAT 32 (Windows)"

#: lib/isodumper.py:714
msgid "NTFS (Windows)"
msgstr "NTFS (Windows)"

#: lib/isodumper.py:716
msgid "ext4 (Linux)"
msgstr "ext4 (Linux)"

#: lib/isodumper.py:718
msgid "Execute"
msgstr ""

#: lib/isodumper.py:719 lib/isodumper.py:786
msgid "Cancel"
msgstr ""

#: lib/isodumper.py:776
msgid "A tool for writing ISO images to  a device"
msgstr ""

#: lib/isodumper.py:784
msgid ""
"Warning\n"
"No target devices were found.\n"
"You need to plug in a USB Key to which the image can be written."
msgstr ""

#: polkit/org.mageia.isodumper.policy.in.h:1
msgid "Run Isodumper"
msgstr "Esegui Isodumper"

#: polkit/org.mageia.isodumper.policy.in.h:2
msgid "Authentication is required to run Isodumper"
msgstr "È richiesta l'autenticazione per eseguire Isodumper"

#: share/applications/isodumper.desktop.in.h:1
msgid "A GUI tool to write .img and .iso files to USB sticks"
msgstr ""
"Uno strumento con interfaccia grafica per scrivere file .img e .iso in una "
"chiavetta USB"

#~ msgid ""
#~ "Writing is in progress. Exiting during writing will make the device or "
#~ "the backup unusable.\n"
#~ "Are you sure you want to quit during writing?"
#~ msgstr ""
#~ "La scrittura è in corso. L'uscita durante la scrittura renderà "
#~ "inutilizzabile il dispositivo o la copia di sicurezza.\n"
#~ "Sei sicuro di voler uscire durante la scrittura?"

#~ msgid ""
#~ "A tool for writing ISO images on a USB stick. It's a fork of usb-"
#~ "imagewriter."
#~ msgstr ""
#~ "Uno strumento per scrivere immagini ISO in una chiavetta USB. È un fork "
#~ "di usb-imagewriter."

#~ msgid "Select"
#~ msgstr "Seleziona"

#~ msgid ""
#~ "<b>Warning</b>\n"
#~ " This will <b>destroy all data</b> on the target\n"
#~ " device, are you sure you want to proceed ?\n"
#~ "\n"
#~ " If you say ok here, please <b>do not unplug</b>\n"
#~ " the device during the following operation."
#~ msgstr ""
#~ "<b>Attenzione</b>\n"
#~ " Quest'azione <b>distruggera' tutti i dati</b> nel dispositivo\n"
#~ " target, sei sicuro di voler procedere?\n"
#~ "\n"
#~ " Se dai la conferma qua, per favore <b>non rimuovere</b>\n"
#~ " il dispositivo durante la seguente operazione."

#~ msgid ""
#~ "<b>Error</b>\n"
#~ " Something went wrong, please see the details\n"
#~ " window for the exact error.\n"
#~ "\n"
#~ " The application will be closed with this window, and a logfile\n"
#~ " isodumper.log  will be saved in your homedir/.isodumper "
#~ msgstr ""
#~ "<b>Errore</b>\n"
#~ " Qualcosa è andato storto. Vedi la finestra dei dettagli per scoprire "
#~ "l'errore esatto.\n"
#~ "\n"
#~ " L'applicazione verrà chiusa con questa finestra e un file di log "
#~ "isodumper.log\n"
#~ "verrà salvato nella tua cartellahome/.isodumper "

#~ msgid "The standard. The size of files are limited to 4Gb"
#~ msgstr "Lo standard. La dimensione dei file è limitata a 4Gb"

#~ msgid "To handle files bigger than 4Gb"
#~ msgstr "Per gestire file più grandi di 4Gb"

#~ msgid "Only for Linux systems"
#~ msgstr "Solo per sistemi Linux"

#~ msgid "Select target device to write the image to"
#~ msgstr "Seleziona il dispositivo target nel quale vuoi scrivere l'immagine"

#~ msgid "Select an image file to be written to the device"
#~ msgstr "Seleziona un file immagine da scrivere nel dispositivo"

#~ msgid "Select Image"
#~ msgstr "Seleziona immagine"

#~ msgid "Create a backup of the device as image to restore it later"
#~ msgstr ""
#~ "Crea una copia di sicurezza del dispositivo come immagine per il "
#~ "ripristino successivo"

#~ msgid "(None)"
#~ msgstr "(Nessuno)"

#~ msgid "Select a folder in which to write the backup image"
#~ msgstr ""
#~ "Seleziona una cartella nella quale scrivere l'immagine della copia di "
#~ "sicurezza"

#~ msgid "Backup the device"
#~ msgstr "Fai la copia del dispositivo"

#~ msgid "Format the device as FAT, NTFS or ext:"
#~ msgstr "Formatta il dispositivo in FAT, NTFS o ext:"

#~ msgid "Choose the format. The device will be formatted as one partition"
#~ msgstr ""
#~ "Scegli la formattazione. Il dispositivo verrà formattato in una "
#~ "partizione "

#~ msgid "Details"
#~ msgstr "Dettagli"

#~ msgid ""
#~ "<b>Warning</b>\n"
#~ " No target devices were found. \n"
#~ "\n"
#~ " You need to plug in a USB Key\n"
#~ " to which the image can be written."
#~ msgstr ""
#~ "<b>Avviso</b>\n"
#~ " Non è stato trovato nessun dispositivo target.\n"
#~ "\n"
#~ " Devi inserire una chiavetta USB dove\n"
#~ " l'immagine possa essere scritta."

#~ msgid ""
#~ "<b>Success</b>\n"
#~ " The operation completed successfully.\n"
#~ " \n"
#~ " You are free to unplug it now, a log isodumper.log \n"
#~ " of the operation will be saved in your homedir/.isodumper/ when\n"
#~ " you close the application."
#~ msgstr ""
#~ "<b>Successo</b>\n"
#~ " L'operazione è stata completata con successo.\n"
#~ " \n"
#~ " Sei libero di scollegarlo adesso, il file di log dell'operazione\n"
#~ " isodumper.log verrà salvato nella tua cartellautente/.isodumper/ "
#~ "quando \n"
#~ " chiuderai l'applicazione."