# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the isodumper package.
#
# Translators:
# Rémi Verschelde <akien@mageia.org>, 2013
# Automatically generated, 2013
# Christian Ruesch <cr@rt.fm>, 2013
# latte, 2013
# psyca, 2014-2020
# Marc Lattemann, 2013-2014
# Oliver Grawert <ogra@ubuntu.com>, 2008
# psyca, 2014
# psyca, 2014
# Rémi Verschelde <akien@mageia.org>, 2013
# Christian Ruesch <cr@rt.fm>, 2013
# user7 <wassipaul@gmx.at>, 2014
# Walter Marek <wm6369@gmx.net>, 2018
# user7 <wassipaul@gmx.at>, 2014
# Yves Brungard, 2016
msgid ""
msgstr ""
"Project-Id-Version: Mageia\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-01-21 08:44+0100\n"
"PO-Revision-Date: 2020-01-22 21:56+0000\n"
"Last-Translator: psyca\n"
"Language-Team: German (http://www.transifex.com/MageiaLinux/mageia/language/"
"de/)\n"
"Language: de\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#: backend/raw_write.py:51 backend/raw_write.py:81
msgid "Reading error."
msgstr "Lesefehler."

#: backend/raw_write.py:61
msgid "You don't have permission to write to the device {}"
msgstr "Sie haben nicht die Rechte, um auf das Gerät {} zu schreiben"

#: backend/raw_write.py:90 backend/raw_write.py:104 backend/raw_write.py:113
msgid "Writing error."
msgstr "Schreibfehler."

#: backend/raw_write.py:122
msgid "Writing terminated"
msgstr ""

#: backend/raw_write.py:129
msgid "No partition is mounted."
msgstr "Keine Partition eingehangen."

#: backend/raw_write.py:135
msgid "Could not read mtab ! {} {}"
msgstr "Konnte mtab nicht lesen ! {} {}"

#: backend/raw_write.py:138
msgid "Unmounting all partitions of  {}:\n"
msgstr "Aushängen aller Partition von {}:\n"

#: backend/raw_write.py:141
msgid "Trying to unmount {}...\n"
msgstr "Versuche {} auszuhängen...\n"

#: backend/raw_write.py:145
msgid "Partition {} is busy"
msgstr "Partition {} ist gerade beschäftigt"

#: backend/raw_write.py:147
msgid "Error, umount {} was terminated by signal {}"
msgstr "Fehler, umount {} wurde durch das Signal {} beendet"

#: backend/raw_write.py:149
msgid "{} successfully unmounted"
msgstr "{} erfolgreich ausgehängt"

#: backend/raw_write.py:151
msgid "Error, umount returned {}"
msgstr "Umount Fehler {}"

#: backend/raw_write.py:153
msgid "Execution failed: {}"
msgstr "Durchführung fehlgeschlagen:  {}"

#: backend/raw_write.py:179
msgid "Signature file {} not found\n"
msgstr "Signaturdatei {} nicht gefunden\n"

#: backend/raw_write.py:187
msgid "Sum SHA512 file {} not found\n"
msgstr "SHA512-Prüfsummen-Datei {} nicht gefunden\n"

#: backend/raw_write.py:216
#, python-format
msgid "Invalid signature for %s.sha512"
msgstr "Ungültige Signatur für %s.sha512"

#: backend/raw_write.py:218
msgid "SHA512 sum: {}"
msgstr "SHA512 Summe: {}"

#: backend/raw_write.py:222
msgid "The sha512 sum check is OK and the sum is signed"
msgstr "Die sha512 Summenprüfung ist OK und die Summe wurde signiert"

#: backend/raw_write.py:224
msgid "The sha512 sum check is OK but the signature can't be found"
msgstr ""
"Die sha512 Summenprüfung ist OK, aber die Signatur wurde nicht gefunden"

#: backend/raw_write.py:226
msgid "/!\\The computed and stored sums don't match"
msgstr "/!\\Die berechneten und gespeicherten Prüfsummen stimmen nicht überein"

#: backend/raw_write.py:251 backend/raw_write.py:274 backend/raw_write.py:296
#: backend/raw_write.py:315 backend/raw_write.py:334 backend/raw_write.py:353
msgid "Error while doing persistent partition: "
msgstr "Fehler beim erstellen der persistenten Partition:"

#: backend/raw_write.py:271 backend/raw_write.py:357
msgid "Persistent partition done"
msgstr "Persistente Partition fertiggestellt"

#: lib/isodumper.py:157
msgid "Target Device: "
msgstr "Zielgerät: "

#. I18N these are units for files size
#: lib/isodumper.py:165
msgid "B"
msgstr "B"

#: lib/isodumper.py:165
msgid "GiB"
msgstr "GiB"

#: lib/isodumper.py:165
msgid "KiB"
msgstr "KiB"

#: lib/isodumper.py:165
msgid "MiB"
msgstr "MiB"

#: lib/isodumper.py:165 lib/isodumper.py:169
msgid "TiB"
msgstr "TiB"

#: lib/isodumper.py:183
msgid "Formatting confirmation"
msgstr "Formatieren bestätigen"

#: lib/isodumper.py:188
msgid "The device was formatted successfully."
msgstr "Das Gerät wurde erfolgreich formatiert."

#: lib/isodumper.py:192
msgid "An error occurred while creating a partition."
msgstr "Ein Fehler ist beim erstellen der Partition aufgetreten."

#: lib/isodumper.py:196
msgid "Authentication error."
msgstr "Authentifizierungsfehler."

#: lib/isodumper.py:200
msgid "An error occurred."
msgstr "Ein Fehler ist aufgetreten."

#: lib/isodumper.py:221
msgid "Wrote: {}% "
msgstr "Geschrieben:  {}%"

#: lib/isodumper.py:247
msgid "Backup confirmation"
msgstr "Datensicherung bestätigen"

#: lib/isodumper.py:247
msgid "Do you want to overwrite the file?"
msgstr "Möchten Sie die Datei überschreiben?"

#: lib/isodumper.py:255
#, python-format
msgid ""
"The destination directory is too small to receive the backup (%s Mb needed)"
msgstr ""
"Das Zielverzeichnis ist zu klein um die Sicherung zu erhalten (%s MB "
"benötigt)"

#: lib/isodumper.py:261 lib/isodumper.py:556 lib/isodumper.py:732
msgid "Backup to:"
msgstr "Sichern nach:"

#: lib/isodumper.py:274
#, python-brace-format
msgid "{source} successfully written to {target}"
msgstr "{source} erfolgreich auf {target} geschrieben"

#: lib/isodumper.py:296
msgid "The device is too small to contain the ISO file."
msgstr "Dieses Gerät ist zu kein, um die ISO-Datei zu beinhalten."

#: lib/isodumper.py:300
msgid "Writing confirmation"
msgstr "Schreiben bestätigen"

#: lib/isodumper.py:303
msgid "The device is bigger than 32 Gbytes. Are you sure you want use it?"
msgstr ""
"Dieses Gerät ist größer als 32 Gbytes. Wollen Sie dieses wirklich verwenden?"

#: lib/isodumper.py:303 lib/isodumper.py:386
msgid "Warning"
msgstr "Warnung"

#: lib/isodumper.py:310
#, python-brace-format
msgid "Writing {source} to {target}"
msgstr "Schreibe {source} auf {target}"

#: lib/isodumper.py:311
msgid " to "
msgstr " auf "

#: lib/isodumper.py:311
msgid "Executing copy from "
msgstr "Ausführen der Kopie von"

#: lib/isodumper.py:327
#, python-brace-format
msgid "Image {source} successfully written to {target}"
msgstr "Abbild {source} erfolgreich auf {target} geschrieben"

#: lib/isodumper.py:328
msgid "Bytes written: "
msgstr "Bytes geschrieben:"

#: lib/isodumper.py:329
msgid "Checking "
msgstr "Überprüfe "

#: lib/isodumper.py:347
msgid "Adding persistent partition"
msgstr "Füge persistente Partition hinzu"

#: lib/isodumper.py:350
msgid "No key for encrypted partition provided. Adding the partition aborted."
msgstr ""

#: lib/isodumper.py:354
msgid "Added encrypted persistent partition"
msgstr "Verschlüsselte persistente Partition hinzugefügt"

#: lib/isodumper.py:359
msgid "Added persistent partition"
msgstr "Persistente Partition hinzugefügt"

#: lib/isodumper.py:374
msgid "Success"
msgstr "Erfolg"

#: lib/isodumper.py:374
msgid ""
"The operation completed successfully.\n"
" You are free to unplug it now, a logfile \n"
"(/home/-user- or /root)/.isodumper/isodumper.log will be saved when\n"
" you close the application."
msgstr ""
"Der Vorgang wurde erfolgreich durchgeführt.\n"
"Sie können das Gerät nun entfernen. Eine Protokoll-Datei wird unter\n"
"(/home/-Benutzer- oder /root)/.isodumper/isodumper.log gespeichert,\n"
"sobald Sie die Anwendung schließen."

#: lib/isodumper.py:386
msgid ""
"Writing is in progress. Exiting during writing \n"
"            will make the device or the backup unusable.\n"
"            Are you sure you want to quit during writing?"
msgstr ""
"Der Schreibvorgang ist am Laufen. Durch das Beenden\n"
"während des Schreibvorgangs wird das Gerät oder das Backup unbenutzbar.\n"
"Sind Sie sicher, dass Sie den Vorgang während des Schreibens auf das Gerät "
"beenden wollen?"

#: lib/isodumper.py:398 lib/isodumper.py:482
msgid "Error"
msgstr "Fehler"

#: lib/isodumper.py:438
msgid "Image "
msgstr "Abbild "

#: lib/isodumper.py:442 lib/isodumper.py:504
msgid "IsoDumper"
msgstr "IsoDumper"

#: lib/isodumper.py:442
msgid "Mageia IsoDumper"
msgstr "Mageia IsoDumper"

#: lib/isodumper.py:444
msgid ""
"This GUI program is primarily for safely writing a bootable ISO image to a "
"USB flash drive, an operation devious & potentially hazardous when done by "
"hand. As a bonus, it can also back up the entire previous contents of the "
"flash drive onto the hard disc, and restore the flash drive to its previous "
"state subsequently."
msgstr ""

#: lib/isodumper.py:448
msgid "It gives also a feature for formatting the USB device."
msgstr "Es bietet auch die Möglichkeit, dass USB-Gerät zu formatieren."

#: lib/isodumper.py:449
msgid ""
"IsoDumper can be launched either from the menus, or a user console with the "
"command 'isodumper'."
msgstr ""
"IsoDumper kann entweder über die Menüs oder einer Benutzerkonsole mit dem "
"Befehl 'isodumper' gestartet werden."

#: lib/isodumper.py:450
msgid ""
"The root password is solicited when this is necessary for the program's "
"operation."
msgstr ""

#: lib/isodumper.py:451
msgid ""
"The flash drive can be inserted beforehand or once the program is started. "
"In the latter case, a dialogue will say that there is no flash drive "
"inserted, and allow a 'retry' to find it once it is. <BR />(You may have to "
"close any automatically opened File Manager window)."
msgstr ""

#: lib/isodumper.py:454
msgid ""
"The fields of the main window are as follows:<BR />- Device to work on: the "
"device of the USB flash drive, a drop-down list to choose from.<BR />- Write "
"Image: to choose the source ISO image *.iso (or flash drive backup file *."
"img) to write out.<BR />- Write to device: This button launches the "
"operation - with a prior warning dialogue."
msgstr ""

#: lib/isodumper.py:458
msgid ""
"- Add a persistent partition: the remaining space will be used in a new "
"partition where data from the Live system can be written and recovered "
"between sessions."
msgstr ""

#: lib/isodumper.py:459
msgid ""
"- Encrypt: the persistent partition will be encrypted with the key provided "
"in <i>Key</i> field."
msgstr ""

#: lib/isodumper.py:460
msgid "The operation is shown in the progress bar beneath."
msgstr ""

#: lib/isodumper.py:461
msgid ""
"- Backup to: define the name and placement of the backup image file. The "
"current flash drive will be backed up to a disc file. Note that the entire "
"flash drive is preserved, regardless of its actual contents; ensure that you "
"have the necessary free disc space (the same size as the USB device). This "
"backup file can be used later to restore the flash drive by selecting it as "
"the source *.img file to write out."
msgstr ""

#: lib/isodumper.py:465
msgid "- Backup the device: launch the backup operation."
msgstr ""

#: lib/isodumper.py:466
msgid ""
"- Format the device: create an unique partition on the entire volume in the "
"specified format in FAT, NTFS or ext. You can specify a volume name and the "
"format in a new dialog box."
msgstr ""

#: lib/isodumper.py:482
msgid "There is another instance of Isodumper already running."
msgstr "Es wir bereits eine Instanz von Isodumper ausgeführt."

#: lib/isodumper.py:496
msgid "Choose an image"
msgstr "Wähle ein Abbild aus"

#: lib/isodumper.py:497
msgid ""
"Warning\n"
"This will destroy all data on the target device,\n"
"        are you sure you want to proceed?\n"
"        If you say ok here, please <b>do not unplug</b>        the device "
"during the following operation."
msgstr ""
"Warnung:\n"
"Dies wird alle Daten auf dem Zielgerät zerstören,\n"
"sind Sie sicher, dass Sie fortfahren wollen? \n"
"Wenn Sie diesen Vorgang bestätigen, <b>entfernen Sie nicht</b> das Gerät, "
"während die folgende Aktion durchgeführt wird."

#: lib/isodumper.py:531
msgid "Device to work on:"
msgstr "Gerät, mit dem gearbeitet wird:"

#: lib/isodumper.py:535
msgid "Write Image:"
msgstr "Schreibe Abbild:"

#: lib/isodumper.py:541
msgid "&Write to device"
msgstr "&Schreibvorgang starten"

#: lib/isodumper.py:546
msgid "Add a persistent partition in the remaining space"
msgstr "Persistente Partition dem freien Speicher hinzufügen"

#: lib/isodumper.py:548
msgid "Encrypt partition"
msgstr "Partition verschlüsseln"

#: lib/isodumper.py:549
msgid "Key:"
msgstr ""

#: lib/isodumper.py:562
msgid "Backup the device"
msgstr "Das Gerät sichern"

#: lib/isodumper.py:565
msgid "Format the device in FAT, NTFS or ext:"
msgstr "Formatiere das Gerät in FAT, NTFS oder ext:"

#: lib/isodumper.py:567
msgid "Format the device"
msgstr "Das Gerät formatieren"

#: lib/isodumper.py:570
msgid "Progress"
msgstr "Fortschritt"

#: lib/isodumper.py:574
msgid "Report"
msgstr "Bericht"

#: lib/isodumper.py:577 lib/isodumper.py:687
msgid "Refresh"
msgstr "Aktualisieren"

#: lib/isodumper.py:579
msgid "About"
msgstr "Über"

#: lib/isodumper.py:581
msgid "Help"
msgstr "Hilfe"

#: lib/isodumper.py:583
msgid "Quit"
msgstr "Beenden"

#: lib/isodumper.py:589
msgid "UDisks2 is not available on your system"
msgstr "UDisk2 ist nicht auf Ihrem System verfügbar"

#: lib/isodumper.py:605
msgid "Label for the device:"
msgstr "Bezeichnung für das Gerät:"

#: lib/isodumper.py:609
msgid "FAT 32 (Windows)"
msgstr "FAT 32 (Windows)"

#: lib/isodumper.py:611
msgid "exFAT (Windows)"
msgstr "exFAT (Windows)"

#: lib/isodumper.py:613
msgid "NTFS (Windows)"
msgstr "NTFS (Windows)"

#: lib/isodumper.py:615
msgid "ext4 (Linux)"
msgstr "ext4 (Linux)"

#: lib/isodumper.py:617
msgid "Execute"
msgstr "Ausführen"

#: lib/isodumper.py:618 lib/isodumper.py:688
msgid "Cancel"
msgstr "Abbrechen"

#: lib/isodumper.py:659
msgid "OK"
msgstr "OK"

#: lib/isodumper.py:669
msgid "Yes"
msgstr "Ja"

#: lib/isodumper.py:670
msgid "No"
msgstr "Nein"

#: lib/isodumper.py:678
msgid "A tool for writing ISO images to  a device"
msgstr "Ein Werkzeug um ISO-Abbilder auf ein Gerät zu schreiben"

#: lib/isodumper.py:678
msgid "Oliver Grawert<BR />Papoteur<BR />Pictures : Timothée Giet"
msgstr "Oliver Grawert<BR />Papoteur<BR />Bilder : Timothée Giet"

#: lib/isodumper.py:686
msgid ""
"Warning\n"
"No target devices were found.\n"
"You need to plug in a USB Key to which the image can be written."
msgstr ""
"Warnung:\n"
"Kein Zielgerät gefunden.\n"
"Sie müssen einen USB-Stick einstecken, auf welchem das \n"
"Abbild geschrieben werden kann."

#: polkit/org.mageia.isodumper.policy.in.h:1
msgid "Isodumper requesting write access"
msgstr "Isodumper fordert Schreibzugriff an"

#: polkit/org.mageia.isodumper.policy.in.h:2
msgid "Manatools requesting write access"
msgstr "Manatools fordert Schreibzugriff an"

#: share/applications/format-usb.desktop.in.h:1
msgid "A GUI tool to format USB sticks"
msgstr ""
"Eine Anwendung mit grafischer Benutzeroberfläche um USB-Sticks zu formatieren"

#: share/applications/isodumper.desktop.in.h:1
msgid "A GUI tool to write .img and .iso files to USB sticks"
msgstr ""
"Eine graphische Oberfläche, um .img oder .iso Abbilder auf USB-Sticks zu "
"schreiben"