# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the isodumper package. # # Translators: # Rémi Verschelde , 2013 # Automatically generated, 2013 # Christian Ruesch , 2013 # latte, 2013 # psyca, 2014-2016 # Marc Lattemann, 2013-2014 # Oliver Grawert , 2008 # psyca, 2014 # psyca, 2014 # Rémi Verschelde , 2013 # Christian Ruesch , 2013 # user7 , 2014 # user7 , 2014 msgid "" msgstr "" "Project-Id-Version: Mageia\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2016-07-18 11:44+0200\n" "PO-Revision-Date: 2016-07-18 21:48+0000\n" "Last-Translator: psyca\n" "Language-Team: German (http://www.transifex.com/MageiaLinux/mageia/language/" "de/)\n" "Language: de\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: lib/isodumper.py:123 #, python-format msgid "%r not known to UDisks2" msgstr "%r ist UDisks2 unbekannt" #: lib/isodumper.py:190 msgid "Mb" msgstr "Mb" #: lib/isodumper.py:210 msgid "Target Device: " msgstr "Ziel Gerät: " #: lib/isodumper.py:232 msgid "Backup to: " msgstr "Sichern nach:" #: lib/isodumper.py:236 msgid "Formatting confirmation" msgstr "" #: lib/isodumper.py:241 msgid "The device was formatted successfully." msgstr "Das Gerät wurde erfolgreich formatiert." #: lib/isodumper.py:245 msgid "An error occurred while creating a partition." msgstr "Ein Fehler ist beim erstellen der Partition aufgetreten." #: lib/isodumper.py:249 msgid "Authentication error." msgstr "Authentifizierungsfehler." #: lib/isodumper.py:253 msgid "An error occurred." msgstr "Ein Fehler ist aufgetreten." #: lib/isodumper.py:290 msgid "Backup confirmation" msgstr "" #: lib/isodumper.py:290 msgid "Do you want to overwrite the file?" msgstr "Möchten Sie die Datei überschreiben?" #: lib/isodumper.py:298 #, python-format msgid "" "The destination directory is too small to receive the backup (%s Mb needed)" msgstr "" "Das Zielverzeichnis ist zu klein um die Sicherung zu erhalten (%s MB " "benötigt)" #: lib/isodumper.py:304 lib/isodumper.py:666 msgid "Backup to:" msgstr "Sichern nach:" #: lib/isodumper.py:324 msgid "The device is too small to contain the ISO file." msgstr "Dieses Gerät ist zu kein, um die ISO-Datei zu beinhalten." #: lib/isodumper.py:328 msgid "Writing confirmation" msgstr "" #: lib/isodumper.py:331 msgid "The device is bigger than 32 Gbytes. Are you sure you want use it?" msgstr "" "Dieses Gerät ist größer als 32 Gbytes. Wollen Sie dieses wirklich verwenden?" #: lib/isodumper.py:331 lib/isodumper.py:508 msgid "Warning" msgstr "Warnung" #: lib/isodumper.py:356 msgid "Unmounting all partitions of " msgstr "Aushängen aller Partitionen von " #: lib/isodumper.py:358 msgid "Trying to unmount " msgstr "Versuche aushängen von " #: lib/isodumper.py:362 #, python-format msgid "Partition %s is busy" msgstr "Die Partition %s ist gerade beschäftigt" #: lib/isodumper.py:366 msgid " was terminated by signal " msgstr " wurde beendet mit Signal " #: lib/isodumper.py:366 lib/isodumper.py:372 msgid "Error, umount " msgstr "Fehler, Aushängen von " #: lib/isodumper.py:370 msgid " successfully unmounted" msgstr " erfolgreich ausgehängt" #: lib/isodumper.py:372 msgid " returned " msgstr " hatte Rückgabewert " #: lib/isodumper.py:376 msgid "Execution failed: " msgstr "Ausführen fehlgeschlagen: " #: lib/isodumper.py:385 msgid "Could not read mtab !" msgstr "Konnte mtab nicht lesen !" #: lib/isodumper.py:395 lib/isodumper.py:422 msgid "Reading error." msgstr "Lesefehler." #: lib/isodumper.py:403 msgid "You don't have permission to write to the device" msgstr "Sie haben nicht die Rechte, um auf dieses Gerät zu schreiben." #: lib/isodumper.py:408 lib/isodumper.py:409 msgid " to " msgstr " auf " #: lib/isodumper.py:408 msgid "Writing " msgstr "Schreibe " #: lib/isodumper.py:409 msgid "Executing copy from " msgstr "Ausführen der Kopie von" #: lib/isodumper.py:429 lib/isodumper.py:443 lib/isodumper.py:453 msgid "Writing error." msgstr "Schreibfehler." #: lib/isodumper.py:436 msgid "Wrote: " msgstr "Geschrieben: " #: lib/isodumper.py:448 msgid " successfully written to " msgstr " erfolgreich geschrieben nach" #: lib/isodumper.py:448 lib/isodumper.py:567 msgid "Image " msgstr "Abbild " #: lib/isodumper.py:449 msgid "Bytes written: " msgstr "Bytes geschrieben:" #: lib/isodumper.py:461 msgid "Checking " msgstr "Überprüfe " #: lib/isodumper.py:486 msgid "SHA1 sum: " msgstr "SHA1 Summe:" #: lib/isodumper.py:487 msgid "MD5 sum: " msgstr "MD5 Summe:" #: lib/isodumper.py:496 msgid "Success" msgstr "Erfolg" #: lib/isodumper.py:496 msgid "" "The operation completed successfully.\n" " You are free to unplug it now, a logfile \n" "(/home/-user- or /root)/.isodumper/isodumper.log will be saved when\n" " you close the application." msgstr "" "Der Vorgang wurde ordnungsgemäß durchgeführt.\n" "Sie können das Gerät nun entfernen. \n" "Eine Log-Datei des Vorgangs wird in (/homedir/ oder /root)/.isodumper/" "isodumper.log gespeichert, sobald Sie die Anwendung schließen." #: lib/isodumper.py:508 msgid "" "Writing is in progress. Exiting during writing \n" " will make the device or the backup unusable.\n" " Are you sure you want to quit during writing?" msgstr "" "Der Schreibvorgang ist am Laufen. Durch das Beenden\n" "während des Schreibvorgangs wird das Gerät oder das Backup unbenutzbar.\n" "Sind Sie sicher, dass Sie den Vorgang während des Schreibens auf das Gerät " "beenden wollen?" #: lib/isodumper.py:520 msgid "Error" msgstr "Fehler" #: lib/isodumper.py:571 lib/isodumper.py:625 msgid "IsoDumper" msgstr "IsoDumper" #: lib/isodumper.py:571 msgid "" "Mageia IsoDumper
----------------
This GUI program is primarily " "for safely writing a bootable ISO image to a USB flash drive, an operation " "devious & potentially hazardous when done by hand. As a bonus, it can also " "back up theentire previous
contents of the flash drive onto the hard " "disc, and restore the flash drive to its previous state subsequently.
It gives also a feature for formatting the USB device.

IsoDumper " "can be launched either from the menus, or a user or root console with the " "command 'isodumper'.
For normal users, the root password is solicited; " "this is necessary for the program's operation.
The flash drive can be " "inserted beforehand or once the program is started. In the latter case, a " "dialogue will say that there is no flash drive inserted, and allow a 'retry' " "to find it once it is.
(You may have to close any automatically opened " "File Manager window).

The fields of the main window are as " "follows:
- Device to work on: the device of the USB flash drive, a drop-" "down list to choose from.
- Write Image: to choose the source ISO image " "*.iso (or flash drive backup file *.img) to write out.
- Write to " "device: This button launches the operation - with a prior warning dialogue. " "
The operation is shown in the progress bar beneath.
- Backup to: " "define the name and placement of the backup image file. The current flash " "drive will be backed up to a disc file. Note that the entire flash drive is " "preserved, regardless of its actual contents; ensure that you have the " "necessary free disc space (the same size as the USB device). This backup " "file can be used later to restore the flash drive by selecting it as the " "source *.img file to write out.
- Backup the device: launch the backup " "operation.
- Format the device: create an unique partition on the " "entire volume in the specified format in FAT, NTFS or ext. You can specify a " "volume name and the format in a new dialog box.
" msgstr "" #: lib/isodumper.py:617 msgid "Choose an image" msgstr "Wähle ein Abbild aus" #: lib/isodumper.py:618 msgid "" "Warning\n" "This will destroy all data on the target device,\n" " are you sure you want to proceed?\n" " If you say ok here, please do not unplug the device " "during the following operation." msgstr "" "Warnung\n" "Dies wird alle Daten auf dem Zielgerät zerstören,\n" "sind Sie sicher, daß Sie fortfahren wollen? \n" "Wenn Sie Ok wählen, bitte das Gerät während der folgenden Aktionen nicht " "herausziehen." #: lib/isodumper.py:653 msgid "Device to work on:" msgstr "Gerät, mit dem gearbeitet wird:" #: lib/isodumper.py:657 msgid "Write Image:" msgstr "Schreibe Abbild:" #: lib/isodumper.py:663 msgid "&Write to device" msgstr "&Schreibvorgang starten" #: lib/isodumper.py:672 msgid "&Backup the device" msgstr "&Datensicherung starten" #: lib/isodumper.py:676 msgid "Format the device in FAT, NTFS or ext:" msgstr "Formatiere das Gerät in FAT, NTFS oder ext:" #: lib/isodumper.py:678 msgid "&Format the device" msgstr "&Formatierung starten" #: lib/isodumper.py:682 msgid "Progress" msgstr "Fortschritt" #: lib/isodumper.py:686 msgid "Report" msgstr "Bericht" #: lib/isodumper.py:691 lib/isodumper.py:799 msgid "&Refresh" msgstr "&Aktualisieren" #: lib/isodumper.py:693 msgid "&About" msgstr "&Über" #: lib/isodumper.py:695 msgid "&Help" msgstr "&Hilfe" #: lib/isodumper.py:697 msgid "&Quit" msgstr "&Beenden" #: lib/isodumper.py:703 msgid "UDisks2 is not available on your system" msgstr "UDisk2 ist nicht auf deinem System verfügbar" #: lib/isodumper.py:722 msgid "Label for the device:" msgstr "Bezeichnung für das Gerät:" #: lib/isodumper.py:726 msgid "FAT 32 (Windows)" msgstr "FAT 32 (Windows)" #: lib/isodumper.py:728 msgid "NTFS (Windows)" msgstr "NTFS (Windows)" #: lib/isodumper.py:730 msgid "ext4 (Linux)" msgstr "ext4 (Linux)" #: lib/isodumper.py:732 msgid "Execute" msgstr "Ausführen" #: lib/isodumper.py:733 lib/isodumper.py:800 msgid "Cancel" msgstr "Abbrechen" #: lib/isodumper.py:790 msgid "A tool for writing ISO images to a device" msgstr "Ein Werkzeug um ISO-Abbilder auf ein Gerät zu schreiben" #: lib/isodumper.py:798 msgid "" "Warning\n" "No target devices were found.\n" "You need to plug in a USB Key to which the image can be written." msgstr "" "Warnung\n" "Kein Zielgerät gefunden.\n" "Sie müssen einen USB-Stick einstecken, auf welchem das Abbild geschrieben " "werden kann." #: polkit/org.mageia.isodumper.policy.in.h:1 msgid "Run Isodumper" msgstr "Isodumper ausführen" #: polkit/org.mageia.isodumper.policy.in.h:2 msgid "Authentication is required to run Isodumper" msgstr "Eine Authentifizierung wird benötigt um die Isodumper zu starten" #: share/applications/isodumper.desktop.in.h:1 msgid "A GUI tool to write .img and .iso files to USB sticks" msgstr "" "Eine graphische Oberfläche, um .img oder .iso Abbilder auf USB-Sticks zu " "schreiben"