# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the isodumper package.
#
# Translators:
# Jiří Vírava <appukonrad@gmail.com>, 2013
# Automatically generated, 2013
# FIRST AUTHOR <EMAIL@ADDRESS>, 2008
# fri, 2014
# fri, 2014
# Jiří Vírava <appukonrad@gmail.com>, 2013-2014
# Jiří Vírava <appukonrad@gmail.com>, 2013
# Luděk Janča <joelp@email.cz>, 2016
# fri, 2014-2015
msgid ""
msgstr ""
"Project-Id-Version: Mageia\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2016-07-18 11:44+0200\n"
"PO-Revision-Date: 2016-07-18 07:29+0000\n"
"Last-Translator: Yves Brungard\n"
"Language-Team: Czech (http://www.transifex.com/MageiaLinux/mageia/language/"
"cs/)\n"
"Language: cs\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"

#: lib/isodumper.py:123
#, python-format
msgid "%r not known to UDisks2"
msgstr "%r neznámé UDisks2"

#: lib/isodumper.py:190
msgid "Mb"
msgstr "Mb"

#: lib/isodumper.py:210
msgid "Target Device: "
msgstr "Cílové zařízení: "

#: lib/isodumper.py:232
msgid "Backup to: "
msgstr ""

#: lib/isodumper.py:236
msgid "Formatting confirmation"
msgstr ""

#: lib/isodumper.py:241
msgid "The device was formatted successfully."
msgstr "Zařízení bylo úspěšně naformátováno."

#: lib/isodumper.py:245
msgid "An error occurred while creating a partition."
msgstr "Při vytváření diskového oddílu se vyskytla chyba."

#: lib/isodumper.py:249
msgid "Authentication error."
msgstr "Chyba při ověření."

#: lib/isodumper.py:253
msgid "An error occurred."
msgstr "Stala se chyba."

#: lib/isodumper.py:290
msgid "Backup confirmation"
msgstr ""

#: lib/isodumper.py:290
msgid "Do you want to overwrite the file?"
msgstr "Chcete soubor přepsat?"

#: lib/isodumper.py:298
#, python-format
msgid ""
"The destination directory is too small to receive the backup (%s Mb needed)"
msgstr "Cílový adresář je na přijetí zálohy příliš malý (potřeba %s MB)"

#: lib/isodumper.py:304 lib/isodumper.py:666
msgid "Backup to:"
msgstr ""

#: lib/isodumper.py:324
msgid "The device is too small to contain the ISO file."
msgstr "Zařízení je příliš malé, aby mohlo obsahovat soubor ISO."

#: lib/isodumper.py:328
msgid "Writing confirmation"
msgstr ""

#: lib/isodumper.py:331
msgid "The device is bigger than 32 Gbytes. Are you sure you want use it?"
msgstr ""
"Zařízení je větší než 32 GB. Jste si jisti, že ho chcete opravdu použít?"

#: lib/isodumper.py:331 lib/isodumper.py:508
msgid "Warning"
msgstr "Varování"

#: lib/isodumper.py:356
msgid "Unmounting all partitions of "
msgstr "Odpojují se všechny oddíly "

#: lib/isodumper.py:358
msgid "Trying to unmount "
msgstr "Pokouší se odpojit "

#: lib/isodumper.py:362
#, python-format
msgid "Partition %s is busy"
msgstr "Oddíl %s je zaneprázdněn"

#: lib/isodumper.py:366
msgid " was terminated by signal "
msgstr " bylo přerušeno signálem "

#: lib/isodumper.py:366 lib/isodumper.py:372
msgid "Error, umount "
msgstr "Chyba, odpojení "

#: lib/isodumper.py:370
msgid " successfully unmounted"
msgstr " úspěšně odpojen"

#: lib/isodumper.py:372
msgid " returned "
msgstr " vrátilo "

#: lib/isodumper.py:376
msgid "Execution failed: "
msgstr "Spuštění selhalo: "

#: lib/isodumper.py:385
msgid "Could not read mtab !"
msgstr "Nelze přečíst mtab!"

#: lib/isodumper.py:395 lib/isodumper.py:422
msgid "Reading error."
msgstr "Chyba při čtení."

#: lib/isodumper.py:403
msgid "You don't have permission to write to the device"
msgstr ""

#: lib/isodumper.py:408 lib/isodumper.py:409
msgid " to "
msgstr "na"

#: lib/isodumper.py:408
msgid "Writing "
msgstr "Zapisuje se "

#: lib/isodumper.py:409
msgid "Executing copy from "
msgstr "Kopíruje se z "

#: lib/isodumper.py:429 lib/isodumper.py:443 lib/isodumper.py:453
msgid "Writing error."
msgstr "Chyba při zápisu."

#: lib/isodumper.py:436
msgid "Wrote: "
msgstr "Zapsáno: "

#: lib/isodumper.py:448
msgid " successfully written to "
msgstr " byl úspěšně zapsán do "

#: lib/isodumper.py:448 lib/isodumper.py:567
msgid "Image "
msgstr "Obraz "

#: lib/isodumper.py:449
msgid "Bytes written: "
msgstr "Zapsáno bytů: "

#: lib/isodumper.py:461
msgid "Checking "
msgstr "Ověřuje se"

#: lib/isodumper.py:486
msgid "SHA1 sum: "
msgstr "Kontrolní součet SHA1: "

#: lib/isodumper.py:487
msgid "MD5  sum: "
msgstr "Kontrolní součet MD5: "

#: lib/isodumper.py:496
msgid "Success"
msgstr "Úspěch"

#: lib/isodumper.py:496
msgid ""
"The operation completed successfully.\n"
" You are free to unplug it now, a logfile \n"
"(/home/-user- or /root)/.isodumper/isodumper.log will be saved when\n"
" you close the application."
msgstr ""

#: lib/isodumper.py:508
msgid ""
"Writing is in progress. Exiting during writing \n"
"            will make the device or the backup unusable.\n"
"            Are you sure you want to quit during writing?"
msgstr ""

#: lib/isodumper.py:520
msgid "Error"
msgstr "Chyba"

#: lib/isodumper.py:571 lib/isodumper.py:625
msgid "IsoDumper"
msgstr "IsoDumper"

#: lib/isodumper.py:571
msgid ""
"Mageia IsoDumper<BR />----------------<BR />This GUI program is primarily "
"for safely writing a bootable ISO image to a USB flash drive, an operation "
"devious & potentially hazardous when done by hand. As a bonus, it can also "
"back up theentire previous<BR />contents of the flash drive onto the hard "
"disc, and restore the flash drive to its previous state subsequently.<BR /"
">It gives also a feature for formatting the USB device.<BR /><BR />IsoDumper "
"can be launched either from the menus, or a user or root console with the "
"command 'isodumper'.<BR />For normal users, the root password is solicited; "
"this is necessary for the program's operation. <BR />The flash drive can be "
"inserted beforehand or once the program is started. In the latter case, a "
"dialogue will say that there is no flash drive inserted, and allow a 'retry' "
"to find it once it is. <BR />(You may have to close any automatically opened "
"File Manager window).<BR /><BR />The fields of the main window are as "
"follows:<BR />- Device to work on: the device of the USB flash drive, a drop-"
"down list to choose from.<BR />- Write Image: to choose the source ISO image "
"*.iso (or flash drive backup file *.img) to write out.<BR />- Write to "
"device: This button launches the operation - with a prior warning dialogue. "
"<BR />The operation is shown in the progress bar beneath.<BR />- Backup to: "
"define the name and placement of the backup image file. The current flash "
"drive will be backed up to a disc file. Note that the entire flash drive is "
"preserved, regardless of its actual contents; ensure that you have the "
"necessary free disc space (the same size as the USB device). This backup "
"file can be used later to restore the flash drive by selecting it as the "
"source *.img file to write out.<BR />- Backup the device: launch the backup "
"operation.<BR />- Format the device:  create an unique partition on the "
"entire volume in the specified format in FAT, NTFS or ext. You can specify a "
"volume name and the format in a new dialog box.<BR />"
msgstr ""

#: lib/isodumper.py:617
msgid "Choose an image"
msgstr ""

#: lib/isodumper.py:618
msgid ""
"Warning\n"
"This will destroy all data on the target device,\n"
"        are you sure you want to proceed?\n"
"        If you say ok here, please <b>do not unplug</b>        the device "
"during the following operation."
msgstr ""

#: lib/isodumper.py:653
msgid "Device to work on:"
msgstr "Zařízení, na kterém se má pracovat:"

#: lib/isodumper.py:657
msgid "Write Image:"
msgstr "Zapsat obraz:"

#: lib/isodumper.py:663
msgid "&Write to device"
msgstr ""

#: lib/isodumper.py:672
msgid "&Backup the device"
msgstr ""

#: lib/isodumper.py:676
msgid "Format the device in FAT, NTFS or ext:"
msgstr "Formátovat zařízení na FAT, NTFS nebo ext:"

#: lib/isodumper.py:678
msgid "&Format the device"
msgstr ""

#: lib/isodumper.py:682
msgid "Progress"
msgstr ""

#: lib/isodumper.py:686
msgid "Report"
msgstr "Hlášení"

#: lib/isodumper.py:691 lib/isodumper.py:799
msgid "&Refresh"
msgstr "&Obnovit"

#: lib/isodumper.py:693
msgid "&About"
msgstr "O programu"

#: lib/isodumper.py:695
msgid "&Help"
msgstr "&Nápověda"

#: lib/isodumper.py:697
msgid "&Quit"
msgstr "U&končit"

#: lib/isodumper.py:703
msgid "UDisks2 is not available on your system"
msgstr "UDisks2 není ve vašem systému dostupný"

#: lib/isodumper.py:722
msgid "Label for the device:"
msgstr "Popisek pro zařízení:"

#: lib/isodumper.py:726
msgid "FAT 32 (Windows)"
msgstr "FAT 32 (Windows)"

#: lib/isodumper.py:728
msgid "NTFS (Windows)"
msgstr "NTFS (Windows)"

#: lib/isodumper.py:730
msgid "ext4 (Linux)"
msgstr "ext4 (Linux)"

#: lib/isodumper.py:732
msgid "Execute"
msgstr "Provést"

#: lib/isodumper.py:733 lib/isodumper.py:800
msgid "Cancel"
msgstr "Storno"

#: lib/isodumper.py:790
msgid "A tool for writing ISO images to  a device"
msgstr ""

#: lib/isodumper.py:798
msgid ""
"Warning\n"
"No target devices were found.\n"
"You need to plug in a USB Key to which the image can be written."
msgstr ""

#: polkit/org.mageia.isodumper.policy.in.h:1
msgid "Run Isodumper"
msgstr "Spustit Isodumper"

#: polkit/org.mageia.isodumper.policy.in.h:2
msgid "Authentication is required to run Isodumper"
msgstr "Ke spuštění Isodumper je vyžadováno ověření"

#: share/applications/isodumper.desktop.in.h:1
msgid "A GUI tool to write .img and .iso files to USB sticks"
msgstr ""