# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the isodumper package.
#
# Translators:
# Jiří Vírava <appukonrad@gmail.com>, 2013
# Automatically generated, 2013
# FIRST AUTHOR <EMAIL@ADDRESS>, 2008
# fri, 2014
# fri, 2014
# Jiří Vírava <appukonrad@gmail.com>, 2013-2014
# Jiří Vírava <appukonrad@gmail.com>, 2013
# Luděk Janča <joelp@email.cz>, 2016,2018-2020
# fri, 2014-2016,2019
msgid ""
msgstr ""
"Project-Id-Version: Mageia\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-01-21 08:44+0100\n"
"PO-Revision-Date: 2020-05-09 08:26+0000\n"
"Last-Translator: Luděk Janča <joelp@email.cz>\n"
"Language-Team: Czech (http://www.transifex.com/MageiaLinux/mageia/language/"
"cs/)\n"
"Language: cs\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=4; plural=(n == 1 && n % 1 == 0) ? 0 : (n >= 2 && n "
"<= 4 && n % 1 == 0) ? 1: (n % 1 != 0 ) ? 2 : 3;\n"

#: backend/raw_write.py:51 backend/raw_write.py:81
msgid "Reading error."
msgstr "Chyba při čtení."

#: backend/raw_write.py:61
msgid "You don't have permission to write to the device {}"
msgstr "Nemáte oprávnění pro zápis na zařízení {}"

#: backend/raw_write.py:90 backend/raw_write.py:104 backend/raw_write.py:113
msgid "Writing error."
msgstr "Chyba při zápisu."

#: backend/raw_write.py:122
msgid "Writing terminated"
msgstr "Zapisování zrušeno"

#: backend/raw_write.py:129
msgid "No partition is mounted."
msgstr "Není připojen žádný diskový oddíl."

#: backend/raw_write.py:135
msgid "Could not read mtab ! {} {}"
msgstr "Nelze přečíst mtab!  {} {}"

#: backend/raw_write.py:138
msgid "Unmounting all partitions of  {}:\n"
msgstr "Odpojování všech diskových oddílů {}:\n"

#: backend/raw_write.py:141
msgid "Trying to unmount {}...\n"
msgstr "Pokus o odpojení {} ...\n"

#: backend/raw_write.py:145
msgid "Partition {} is busy"
msgstr "Diskový oddíl {} je zaneprázdněn"

#: backend/raw_write.py:147
msgid "Error, umount {} was terminated by signal {}"
msgstr "Chyba, odpojení {} bylo ukončeno signálem {}"

#: backend/raw_write.py:149
msgid "{} successfully unmounted"
msgstr "{} úspěšně odpojeno"

#: backend/raw_write.py:151
msgid "Error, umount returned {}"
msgstr "Chyba, odpojení vrátilo {}"

#: backend/raw_write.py:153
msgid "Execution failed: {}"
msgstr "Spuštění selhalo: {}"

#: backend/raw_write.py:179
msgid "Signature file {} not found\n"
msgstr "Soubor s podpisem {} nenalezen\n"

#: backend/raw_write.py:187
msgid "Sum SHA512 file {} not found\n"
msgstr "Kontrolní součet SHA512 souboru {} nenalezen\n"

#: backend/raw_write.py:216
#, python-format
msgid "Invalid signature for %s.sha512"
msgstr "Chybný podpis pro %s.sha512"

#: backend/raw_write.py:218
msgid "SHA512 sum: {}"
msgstr "Kontrolní součet SHA512: {}"

#: backend/raw_write.py:222
msgid "The sha512 sum check is OK and the sum is signed"
msgstr "Kontrolní součet sha512 je v pořádku a je podepsán"

#: backend/raw_write.py:224
msgid "The sha512 sum check is OK but the signature can't be found"
msgstr "Kontrolní součet sha512 je v pořádku, ale podpis nebyl nalezen"

#: backend/raw_write.py:226
msgid "/!\\The computed and stored sums don't match"
msgstr "/!\\Spočítaný a uložený kontrolní součet neodpovídají"

#: backend/raw_write.py:251 backend/raw_write.py:274 backend/raw_write.py:296
#: backend/raw_write.py:315 backend/raw_write.py:334 backend/raw_write.py:353
msgid "Error while doing persistent partition: "
msgstr ""

#: backend/raw_write.py:271 backend/raw_write.py:357
msgid "Persistent partition done"
msgstr ""

#: lib/isodumper.py:157
msgid "Target Device: "
msgstr "Cílové zařízení: "

#. I18N these are units for files size
#: lib/isodumper.py:165
msgid "B"
msgstr "B"

#: lib/isodumper.py:165
msgid "GiB"
msgstr "GiB"

#: lib/isodumper.py:165
msgid "KiB"
msgstr "KiB"

#: lib/isodumper.py:165
msgid "MiB"
msgstr "MiB"

#: lib/isodumper.py:165 lib/isodumper.py:169
msgid "TiB"
msgstr "TiB"

#: lib/isodumper.py:183
msgid "Formatting confirmation"
msgstr "Potvrzení formátování"

#: lib/isodumper.py:188
msgid "The device was formatted successfully."
msgstr "Zařízení bylo úspěšně naformátováno."

#: lib/isodumper.py:192
msgid "An error occurred while creating a partition."
msgstr "Při vytváření diskového oddílu se vyskytla chyba."

#: lib/isodumper.py:196
msgid "Authentication error."
msgstr "Chyba při ověření."

#: lib/isodumper.py:200
msgid "An error occurred."
msgstr "Stala se chyba."

#: lib/isodumper.py:221
msgid "Wrote: {}% "
msgstr "Zapsáno: {}% "

#: lib/isodumper.py:247
msgid "Backup confirmation"
msgstr "Potvrzení zálohování"

#: lib/isodumper.py:247
msgid "Do you want to overwrite the file?"
msgstr "Chcete soubor přepsat?"

#: lib/isodumper.py:255
#, python-format
msgid ""
"The destination directory is too small to receive the backup (%s Mb needed)"
msgstr "Cílový adresář je na přijetí zálohy příliš malý (potřeba %s MB)"

#: lib/isodumper.py:261 lib/isodumper.py:556 lib/isodumper.py:732
msgid "Backup to:"
msgstr "Zálohovat do: "

#: lib/isodumper.py:274
#, python-brace-format
msgid "{source} successfully written to {target}"
msgstr "{source} úspěšně zapsáno na {target}"

#: lib/isodumper.py:296
msgid "The device is too small to contain the ISO file."
msgstr "Zařízení je příliš malé, aby mohlo obsahovat soubor ISO."

#: lib/isodumper.py:300
msgid "Writing confirmation"
msgstr "Potvrzení zápisu"

#: lib/isodumper.py:303
msgid "The device is bigger than 32 Gbytes. Are you sure you want use it?"
msgstr ""
"Zařízení je větší než 32 GB. Jste si jisti, že ho chcete opravdu použít?"

#: lib/isodumper.py:303 lib/isodumper.py:386
msgid "Warning"
msgstr "Varování"

#: lib/isodumper.py:310
#, python-brace-format
msgid "Writing {source} to {target}"
msgstr "Zapisování {source} na {target}"

#: lib/isodumper.py:311
msgid " to "
msgstr " na "

#: lib/isodumper.py:311
msgid "Executing copy from "
msgstr "Kopíruje se z "

#: lib/isodumper.py:327
#, python-brace-format
msgid "Image {source} successfully written to {target}"
msgstr "Obraz {source} byl úspěšně zapsán na {target}"

#: lib/isodumper.py:328
msgid "Bytes written: "
msgstr "Zapsáno bytů: "

#: lib/isodumper.py:329
msgid "Checking "
msgstr "Ověřuje se "

#: lib/isodumper.py:347
msgid "Adding persistent partition"
msgstr "Přidávání trvalého oddílu"

#: lib/isodumper.py:350
msgid "No key for encrypted partition provided. Adding the partition aborted."
msgstr ""
"Nebyl vložen šifrovací klíč pro diskový oddíl. Přidání diskového oddílu bylo "
"zrušeno."

#: lib/isodumper.py:354
msgid "Added encrypted persistent partition"
msgstr "Přidán šifrovaný diskový oddíl"

#: lib/isodumper.py:359
msgid "Added persistent partition"
msgstr "Přidán trvalý oddíl"

#: lib/isodumper.py:374
msgid "Success"
msgstr "Úspěch"

#: lib/isodumper.py:374
msgid ""
"The operation completed successfully.\n"
" You are free to unplug it now, a logfile \n"
"(/home/-user- or /root)/.isodumper/isodumper.log will be saved when\n"
" you close the application."
msgstr ""
" Operace byla úspěšně provedena.\n"
" Můžete jej nyní bezpečně odebrat. Záznam bude uložen v\n"
"(/home/uživatel nebo /root)/.isodumper/isodumper.log\n"
" až po zavření aplikace"

#: lib/isodumper.py:386
msgid ""
"Writing is in progress. Exiting during writing \n"
"            will make the device or the backup unusable.\n"
"            Are you sure you want to quit during writing?"
msgstr ""
"Právě probíhá zápis. Ukončením během zápisu\n"
"se může stát, že zařízení nebo záloha bude nepoužitelná.\n"
"Jste si jisti, že chcete skončit během zápisu na zařízení?"

#: lib/isodumper.py:398 lib/isodumper.py:482
msgid "Error"
msgstr "Chyba"

#: lib/isodumper.py:438
msgid "Image "
msgstr "Obraz "

#: lib/isodumper.py:442 lib/isodumper.py:504
msgid "IsoDumper"
msgstr "IsoDumper"

#: lib/isodumper.py:442
msgid "Mageia IsoDumper"
msgstr "Mageia IsoDumper"

#: lib/isodumper.py:444
msgid ""
"This GUI program is primarily for safely writing a bootable ISO image to a "
"USB flash drive, an operation devious & potentially hazardous when done by "
"hand. As a bonus, it can also back up the entire previous contents of the "
"flash drive onto the hard disc, and restore the flash drive to its previous "
"state subsequently."
msgstr ""

#: lib/isodumper.py:448
msgid "It gives also a feature for formatting the USB device."
msgstr "Přidává také možnost formátování USB zařízení."

#: lib/isodumper.py:449
msgid ""
"IsoDumper can be launched either from the menus, or a user console with the "
"command 'isodumper'."
msgstr ""

#: lib/isodumper.py:450
msgid ""
"The root password is solicited when this is necessary for the program's "
"operation."
msgstr ""

#: lib/isodumper.py:451
msgid ""
"The flash drive can be inserted beforehand or once the program is started. "
"In the latter case, a dialogue will say that there is no flash drive "
"inserted, and allow a 'retry' to find it once it is. <BR />(You may have to "
"close any automatically opened File Manager window)."
msgstr ""

#: lib/isodumper.py:454
msgid ""
"The fields of the main window are as follows:<BR />- Device to work on: the "
"device of the USB flash drive, a drop-down list to choose from.<BR />- Write "
"Image: to choose the source ISO image *.iso (or flash drive backup file *."
"img) to write out.<BR />- Write to device: This button launches the "
"operation - with a prior warning dialogue."
msgstr ""

#: lib/isodumper.py:458
msgid ""
"- Add a persistent partition: the remaining space will be used in a new "
"partition where data from the Live system can be written and recovered "
"between sessions."
msgstr ""

#: lib/isodumper.py:459
msgid ""
"- Encrypt: the persistent partition will be encrypted with the key provided "
"in <i>Key</i> field."
msgstr ""

#: lib/isodumper.py:460
msgid "The operation is shown in the progress bar beneath."
msgstr "Operace je zobrazena v ukazateli průběhu níže."

#: lib/isodumper.py:461
msgid ""
"- Backup to: define the name and placement of the backup image file. The "
"current flash drive will be backed up to a disc file. Note that the entire "
"flash drive is preserved, regardless of its actual contents; ensure that you "
"have the necessary free disc space (the same size as the USB device). This "
"backup file can be used later to restore the flash drive by selecting it as "
"the source *.img file to write out."
msgstr ""

#: lib/isodumper.py:465
msgid "- Backup the device: launch the backup operation."
msgstr ""

#: lib/isodumper.py:466
msgid ""
"- Format the device: create an unique partition on the entire volume in the "
"specified format in FAT, NTFS or ext. You can specify a volume name and the "
"format in a new dialog box."
msgstr ""

#: lib/isodumper.py:482
msgid "There is another instance of Isodumper already running."
msgstr "Isodumper již běží v jiném okně."

#: lib/isodumper.py:496
msgid "Choose an image"
msgstr "Vyberte obraz"

#: lib/isodumper.py:497
msgid ""
"Warning\n"
"This will destroy all data on the target device,\n"
"        are you sure you want to proceed?\n"
"        If you say ok here, please <b>do not unplug</b>        the device "
"during the following operation."
msgstr ""
"<b>Varování</b>\n"
" Toto zničí všechna data na cílovém\n"
" zařízení, opravdu chcete pokračovat?\n"
"\n"
" Pokud budete pokračovat, prosím <b>neodpojujte</b>\n"
" zařízení během příštích operací."

#: lib/isodumper.py:531
msgid "Device to work on:"
msgstr "Zařízení, na kterém se má pracovat:"

#: lib/isodumper.py:535
msgid "Write Image:"
msgstr "Zapsat obraz:"

#: lib/isodumper.py:541
msgid "&Write to device"
msgstr "&Zapsat na zařízení"

#: lib/isodumper.py:546
msgid "Add a persistent partition in the remaining space"
msgstr "Přidat trvalý oddíl do zbývajícího místa"

#: lib/isodumper.py:548
msgid "Encrypt partition"
msgstr "Šifrovat oddíl"

#: lib/isodumper.py:549
msgid "Key:"
msgstr "Klíč:"

#: lib/isodumper.py:562
msgid "Backup the device"
msgstr "Zálohovat zařízení"

#: lib/isodumper.py:565
msgid "Format the device in FAT, NTFS or ext:"
msgstr "Formátovat zařízení na FAT, NTFS nebo ext:"

#: lib/isodumper.py:567
msgid "Format the device"
msgstr "Formátovat zařízení"

#: lib/isodumper.py:570
msgid "Progress"
msgstr "Postup"

#: lib/isodumper.py:574
msgid "Report"
msgstr "Hlášení"

#: lib/isodumper.py:577 lib/isodumper.py:687
msgid "Refresh"
msgstr "Obnovit"

#: lib/isodumper.py:579
msgid "About"
msgstr "O programu"

#: lib/isodumper.py:581
msgid "Help"
msgstr "Nápověda"

#: lib/isodumper.py:583
msgid "Quit"
msgstr "Ukončit"

#: lib/isodumper.py:589
msgid "UDisks2 is not available on your system"
msgstr "UDisks2 není ve vašem systému dostupný"

#: lib/isodumper.py:605
msgid "Label for the device:"
msgstr "Popisek pro zařízení:"

#: lib/isodumper.py:609
msgid "FAT 32 (Windows)"
msgstr "FAT 32 (Windows)"

#: lib/isodumper.py:611
msgid "exFAT (Windows)"
msgstr "exFAT (Windows)"

#: lib/isodumper.py:613
msgid "NTFS (Windows)"
msgstr "NTFS (Windows)"

#: lib/isodumper.py:615
msgid "ext4 (Linux)"
msgstr "ext4 (Linux)"

#: lib/isodumper.py:617
msgid "Execute"
msgstr "Provést"

#: lib/isodumper.py:618 lib/isodumper.py:688
msgid "Cancel"
msgstr "Storno"

#: lib/isodumper.py:659
msgid "OK"
msgstr "OK"

#: lib/isodumper.py:669
msgid "Yes"
msgstr "Ano"

#: lib/isodumper.py:670
msgid "No"
msgstr "Ne"

#: lib/isodumper.py:678
msgid "A tool for writing ISO images to  a device"
msgstr "Nástroj na zapisování obrazů ISO na zařízení"

#: lib/isodumper.py:678
msgid "Oliver Grawert<BR />Papoteur<BR />Pictures : Timothée Giet"
msgstr "Oliver Grawert<BR />Papoteur<BR />Obrázky: Timothée Giet"

#: lib/isodumper.py:686
msgid ""
"Warning\n"
"No target devices were found.\n"
"You need to plug in a USB Key to which the image can be written."
msgstr ""
"Varování\n"
"Nebyla nalezena žádná cílová zařízení.\n"
"Je potřeba, abyste zastrčili zařízení USB,\n"
"na které lze obraz zapsat."

#: polkit/org.mageia.isodumper.policy.in.h:1
msgid "Isodumper requesting write access"
msgstr "Isodumper požaduje právo zápisu"

#: polkit/org.mageia.isodumper.policy.in.h:2
msgid "Manatools requesting write access"
msgstr "Manatools požaduje právo zápisu"

#: share/applications/format-usb.desktop.in.h:1
msgid "A GUI tool to format USB sticks"
msgstr "Nástroj pro formátování USB disků s grafickým rozhraním"

#: share/applications/isodumper.desktop.in.h:1
msgid "A GUI tool to write .img and .iso files to USB sticks"
msgstr ""
"Nástroj s grafickým uživatelským rozhraním k zapsání souborů .img a .iso na "
"zařízení/klíčenku USB"