# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the isodumper package. # # Translators: msgid "" msgstr "" "Project-Id-Version: Mageia\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2019-08-15 17:59+0200\n" "PO-Revision-Date: 2019-01-29 07:13+0000\n" "Last-Translator: Yuri Chornoivan \n" "Language-Team: Bosnian (http://www.transifex.com/MageiaLinux/mageia/language/" "bs/)\n" "Language: bs\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" "%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n" #: backend/raw_write.py:49 backend/raw_write.py:78 msgid "Reading error." msgstr "" #: backend/raw_write.py:58 msgid "You don't have permission to write to the device {}" msgstr "" #: backend/raw_write.py:87 backend/raw_write.py:100 backend/raw_write.py:108 msgid "Writing error." msgstr "" #: backend/raw_write.py:117 lib/isodumper.py:368 msgid "Success" msgstr "" #: backend/raw_write.py:122 msgid "No partition is mounted." msgstr "" #: backend/raw_write.py:128 msgid "Could not read mtab ! {} {}" msgstr "" #: backend/raw_write.py:131 msgid "Unmounting all partitions of {}:\n" msgstr "" #: backend/raw_write.py:134 msgid "Trying to unmount {}...\n" msgstr "" #: backend/raw_write.py:138 msgid "Partition {} is busy" msgstr "" #: backend/raw_write.py:140 msgid "Error, umount {} was terminated by signal {}" msgstr "" #: backend/raw_write.py:142 msgid "{} successfully unmounted" msgstr "" #: backend/raw_write.py:144 msgid "Error, umount returned {}" msgstr "" #: backend/raw_write.py:146 msgid "Execution failed: {}" msgstr "" #: backend/raw_write.py:171 msgid "Signature file {} not found\n" msgstr "" #: backend/raw_write.py:179 msgid "Sum SHA512 file {} not found\n" msgstr "" #: backend/raw_write.py:207 #, python-format msgid "Invalid signature for %s.sha512" msgstr "" #: backend/raw_write.py:209 msgid "SHA512 sum: {}" msgstr "" #: backend/raw_write.py:213 msgid "The sha512 sum check is OK and the sum is signed" msgstr "" #: backend/raw_write.py:215 msgid "The sha512 sum check is OK but the signature can't be found" msgstr "" #: backend/raw_write.py:217 msgid "/!\\The computed and stored sums don't match" msgstr "" #: lib/isodumper.py:166 msgid "Target Device: " msgstr "" #. I18N these are units for files size #: lib/isodumper.py:174 msgid "B" msgstr "" #: lib/isodumper.py:174 msgid "GiB" msgstr "" #: lib/isodumper.py:174 msgid "KiB" msgstr "" #: lib/isodumper.py:174 msgid "MiB" msgstr "" #: lib/isodumper.py:174 lib/isodumper.py:178 msgid "TiB" msgstr "" #: lib/isodumper.py:192 msgid "Formatting confirmation" msgstr "" #: lib/isodumper.py:197 msgid "The device was formatted successfully." msgstr "" #: lib/isodumper.py:201 msgid "An error occurred while creating a partition." msgstr "" #: lib/isodumper.py:205 msgid "Authentication error." msgstr "" #: lib/isodumper.py:209 msgid "An error occurred." msgstr "" #: lib/isodumper.py:226 msgid "Wrote: {}% " msgstr "" #: lib/isodumper.py:252 msgid "Backup confirmation" msgstr "" #: lib/isodumper.py:252 msgid "Do you want to overwrite the file?" msgstr "" #: lib/isodumper.py:260 #, python-format msgid "" "The destination directory is too small to receive the backup (%s Mb needed)" msgstr "" #: lib/isodumper.py:266 lib/isodumper.py:541 lib/isodumper.py:698 msgid "Backup to:" msgstr "" #: lib/isodumper.py:279 #, python-brace-format msgid "{source} successfully written to {target}" msgstr "" #: lib/isodumper.py:301 msgid "The device is too small to contain the ISO file." msgstr "" #: lib/isodumper.py:305 msgid "Writing confirmation" msgstr "" #: lib/isodumper.py:308 msgid "The device is bigger than 32 Gbytes. Are you sure you want use it?" msgstr "" #: lib/isodumper.py:308 lib/isodumper.py:380 msgid "Warning" msgstr "Upozorenje" #: lib/isodumper.py:315 #, python-brace-format msgid "Writing {source} to {target}" msgstr "" #: lib/isodumper.py:316 msgid " to " msgstr "" #: lib/isodumper.py:316 msgid "Executing copy from " msgstr "" #: lib/isodumper.py:333 #, python-brace-format msgid "Image {source} successfully written to {target}" msgstr "" #: lib/isodumper.py:334 msgid "Bytes written: " msgstr "" #: lib/isodumper.py:335 msgid "Checking " msgstr "" #: lib/isodumper.py:353 msgid "Adding persistent partition" msgstr "" #: lib/isodumper.py:355 msgid "Added persistent partition" msgstr "" #: lib/isodumper.py:368 msgid "" "The operation completed successfully.\n" " You are free to unplug it now, a logfile \n" "(/home/-user- or /root)/.isodumper/isodumper.log will be saved when\n" " you close the application." msgstr "" #: lib/isodumper.py:380 msgid "" "Writing is in progress. Exiting during writing \n" " will make the device or the backup unusable.\n" " Are you sure you want to quit during writing?" msgstr "" #: lib/isodumper.py:392 lib/isodumper.py:476 msgid "Error" msgstr "Greška" #: lib/isodumper.py:432 msgid "Image " msgstr "" #: lib/isodumper.py:436 lib/isodumper.py:498 msgid "IsoDumper" msgstr "" #: lib/isodumper.py:436 msgid "" "Mageia IsoDumper
----------------
This GUI program is primarily " "for safely writing a bootable ISO image to a USB flash drive, an operation " "devious & potentially hazardous when done by hand. As a bonus, it can also " "back up theentire previous
contents of the flash drive onto the hard " "disc, and restore the flash drive to its previous state subsequently.
It gives also a feature for formatting the USB device.

IsoDumper " "can be launched either from the menus, or a user or root console with the " "command 'isodumper'.
For normal users, the root password is solicited; " "this is necessary for the program's operation.
The flash drive can be " "inserted beforehand or once the program is started. In the latter case, a " "dialogue will say that there is no flash drive inserted, and allow a 'retry' " "to find it once it is.
(You may have to close any automatically opened " "File Manager window).

The fields of the main window are as " "follows:
- Device to work on: the device of the USB flash drive, a drop-" "down list to choose from.
- Write Image: to choose the source ISO image " "*.iso (or flash drive backup file *.img) to write out.
- Write to " "device: This button launches the operation - with a prior warning dialogue. " "
The operation is shown in the progress bar beneath.
- Backup to: " "define the name and placement of the backup image file. The current flash " "drive will be backed up to a disc file. Note that the entire flash drive is " "preserved, regardless of its actual contents; ensure that you have the " "necessary free disc space (the same size as the USB device). This backup " "file can be used later to restore the flash drive by selecting it as the " "source *.img file to write out.
- Backup the device: launch the backup " "operation.
- Format the device: create an unique partition on the " "entire volume in the specified format in FAT, NTFS or ext. You can specify a " "volume name and the format in a new dialog box.
" msgstr "" #: lib/isodumper.py:476 msgid "There is another instance of Isodumper already running." msgstr "" #: lib/isodumper.py:490 msgid "Choose an image" msgstr "" #: lib/isodumper.py:491 msgid "" "Warning\n" "This will destroy all data on the target device,\n" " are you sure you want to proceed?\n" " If you say ok here, please do not unplug the device " "during the following operation." msgstr "" #: lib/isodumper.py:525 msgid "Device to work on:" msgstr "" #: lib/isodumper.py:529 msgid "Write Image:" msgstr "" #: lib/isodumper.py:535 msgid "&Write to device" msgstr "" #: lib/isodumper.py:538 msgid "Add a persistent partition in the remaining space" msgstr "" #: lib/isodumper.py:547 msgid "Backup the device" msgstr "" #: lib/isodumper.py:550 msgid "Format the device in FAT, NTFS or ext:" msgstr "" #: lib/isodumper.py:552 msgid "Format the device" msgstr "" #: lib/isodumper.py:555 msgid "Progress" msgstr "" #: lib/isodumper.py:559 msgid "Report" msgstr "Izvještaj" #: lib/isodumper.py:562 lib/isodumper.py:666 msgid "Refresh" msgstr "" #: lib/isodumper.py:564 msgid "About" msgstr "" #: lib/isodumper.py:566 msgid "Help" msgstr "" #: lib/isodumper.py:568 msgid "Quit" msgstr "" #: lib/isodumper.py:574 msgid "UDisks2 is not available on your system" msgstr "" #: lib/isodumper.py:590 msgid "Label for the device:" msgstr "" #: lib/isodumper.py:594 msgid "FAT 32 (Windows)" msgstr "" #: lib/isodumper.py:596 msgid "NTFS (Windows)" msgstr "" #: lib/isodumper.py:598 msgid "ext4 (Linux)" msgstr "" #: lib/isodumper.py:600 msgid "Execute" msgstr "Izvrši" #: lib/isodumper.py:601 lib/isodumper.py:667 msgid "Cancel" msgstr "Odustani" #: lib/isodumper.py:638 msgid "OK" msgstr "U redu" #: lib/isodumper.py:648 msgid "Yes" msgstr "Da" #: lib/isodumper.py:649 msgid "No" msgstr "Ne" #: lib/isodumper.py:657 msgid "A tool for writing ISO images to a device" msgstr "" #: lib/isodumper.py:657 msgid "Oliver Grawert
Papoteur
Pictures : Timothée Giet" msgstr "" #: lib/isodumper.py:665 msgid "" "Warning\n" "No target devices were found.\n" "You need to plug in a USB Key to which the image can be written." msgstr "" #: polkit/org.mageia.isodumper.policy.in.h:1 msgid "Isodumper requesting write access" msgstr "" #: polkit/org.mageia.isodumper.policy.in.h:2 msgid "Manatools requesting write access" msgstr "" #: share/applications/format-usb.desktop.in.h:1 msgid "A GUI tool to format USB sticks" msgstr "" #: share/applications/isodumper.desktop.in.h:1 msgid "A GUI tool to write .img and .iso files to USB sticks" msgstr ""