From 1c7281219503b8f727fd4288ed67f6bc6baf6913 Mon Sep 17 00:00:00 2001
From: daviddavid <geiger.david68210@gmail.com>
Date: Tue, 26 May 2020 07:18:14 +0200
Subject: Update po files

---
 po/sv.po | 450 +++++++++++++++++++++++++++++++++++++++++----------------------
 1 file changed, 294 insertions(+), 156 deletions(-)

(limited to 'po/sv.po')

diff --git a/po/sv.po b/po/sv.po
index 67b2a2a..03d2ec5 100644
--- a/po/sv.po
+++ b/po/sv.po
@@ -13,7 +13,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Mageia\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-08-15 17:59+0200\n"
+"POT-Creation-Date: 2020-05-26 07:11+0200\n"
 "PO-Revision-Date: 2019-10-15 20:25+0000\n"
 "Last-Translator: Michael Eklund <willard@null.net>\n"
 "Language-Team: Swedish (http://www.transifex.com/MageiaLinux/mageia/language/"
@@ -24,211 +24,232 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 
-#: backend/raw_write.py:49 backend/raw_write.py:78
+#: backend/raw_write.py:51 backend/raw_write.py:81
 msgid "Reading error."
 msgstr "Läsfel."
 
-#: backend/raw_write.py:58
+#: backend/raw_write.py:61
 msgid "You don't have permission to write to the device {}"
 msgstr "Du har inte rättigheter att skriva till enhet {}"
 
-#: backend/raw_write.py:87 backend/raw_write.py:100 backend/raw_write.py:108
+#: backend/raw_write.py:90 backend/raw_write.py:104 backend/raw_write.py:113
 msgid "Writing error."
 msgstr "Skrivfel."
 
-#: backend/raw_write.py:117 lib/isodumper.py:368
-msgid "Success"
-msgstr "Lyckades"
-
 #: backend/raw_write.py:122
+msgid "Writing terminated"
+msgstr ""
+
+#: backend/raw_write.py:129
 msgid "No partition is mounted."
 msgstr "Inga partitioner är monterade."
 
-#: backend/raw_write.py:128
+#: backend/raw_write.py:135
 msgid "Could not read mtab ! {} {}"
 msgstr "Kunde inte läsa mtab ! {} {}"
 
-#: backend/raw_write.py:131
+#: backend/raw_write.py:138
 msgid "Unmounting all partitions of  {}:\n"
 msgstr "Avmonterar alla partitioner på  {}:\n"
 
-#: backend/raw_write.py:134
+#: backend/raw_write.py:141
 msgid "Trying to unmount {}...\n"
 msgstr "Försöker att avmontera {}...\n"
 
-#: backend/raw_write.py:138
+#: backend/raw_write.py:145
 msgid "Partition {} is busy"
 msgstr "Partitionen {} är upptagen"
 
-#: backend/raw_write.py:140
+#: backend/raw_write.py:147
 msgid "Error, umount {} was terminated by signal {}"
 msgstr "Fel, umount {} avbröts med signalen {}"
 
-#: backend/raw_write.py:142
+#: backend/raw_write.py:149
 msgid "{} successfully unmounted"
 msgstr "{} avmonteringen lyckades"
 
-#: backend/raw_write.py:144
+#: backend/raw_write.py:151
 msgid "Error, umount returned {}"
 msgstr "Fel, umount returnerade {}"
 
-#: backend/raw_write.py:146
+#: backend/raw_write.py:153
 msgid "Execution failed: {}"
 msgstr "Utförandet misslyckades: {}"
 
-#: backend/raw_write.py:171
+#: backend/raw_write.py:181
 msgid "Signature file {} not found\n"
 msgstr "Signatur-filen {} hittades inte\n"
 
-#: backend/raw_write.py:179
-msgid "Sum SHA512 file {} not found\n"
-msgstr "SHA512-filen {} hittades inte\n"
+#: backend/raw_write.py:189
+msgid "Sum file {} not found\n"
+msgstr ""
 
-#: backend/raw_write.py:207
+#: backend/raw_write.py:219
 #, python-format
-msgid "Invalid signature for %s.sha512"
-msgstr "Ogiltigt signatur för %s.sha512"
+msgid "Invalid signature for %s"
+msgstr ""
 
-#: backend/raw_write.py:209
-msgid "SHA512 sum: {}"
-msgstr "SHA512 summa: {}"
+#: backend/raw_write.py:221
+msgid "SHA3 sum: {}"
+msgstr ""
 
-#: backend/raw_write.py:213
-msgid "The sha512 sum check is OK and the sum is signed"
-msgstr "Kontrollen av sha512-summan är okej och signerad"
+#: backend/raw_write.py:226
+msgid "The {} sum check is OK and the sum is signed"
+msgstr ""
 
-#: backend/raw_write.py:215
-msgid "The sha512 sum check is OK but the signature can't be found"
-msgstr "Kontrollen av sha512-summan är okej men signatur-filen hittades inte"
+#: backend/raw_write.py:229
+msgid "The {} sum check is OK but the signature can't be found"
+msgstr ""
 
-#: backend/raw_write.py:217
+#: backend/raw_write.py:231
 msgid "/!\\The computed and stored sums don't match"
 msgstr "/!\\De uträknade och lagrade summorna stämmer inte överens"
 
-#: lib/isodumper.py:166
+#: backend/raw_write.py:256 backend/raw_write.py:279 backend/raw_write.py:301
+#: backend/raw_write.py:320 backend/raw_write.py:339 backend/raw_write.py:358
+msgid "Error while doing persistent partition: "
+msgstr ""
+
+#: backend/raw_write.py:276 backend/raw_write.py:362
+msgid "Persistent partition done"
+msgstr ""
+
+#: lib/isodumper.py:157
 msgid "Target Device: "
 msgstr "Målenhet: "
 
 #. I18N these are units for files size
-#: lib/isodumper.py:174
+#: lib/isodumper.py:165
 msgid "B"
 msgstr "B"
 
-#: lib/isodumper.py:174
+#: lib/isodumper.py:165
 msgid "GiB"
 msgstr "GiB"
 
-#: lib/isodumper.py:174
+#: lib/isodumper.py:165
 msgid "KiB"
 msgstr "KiB"
 
-#: lib/isodumper.py:174
+#: lib/isodumper.py:165
 msgid "MiB"
 msgstr "MiB"
 
-#: lib/isodumper.py:174 lib/isodumper.py:178
+#: lib/isodumper.py:165 lib/isodumper.py:169
 msgid "TiB"
 msgstr "TiB"
 
-#: lib/isodumper.py:192
+#: lib/isodumper.py:183
 msgid "Formatting confirmation"
 msgstr "Bekräfta formatering"
 
-#: lib/isodumper.py:197
+#: lib/isodumper.py:188
 msgid "The device was formatted successfully."
 msgstr "Formateringen lyckades"
 
-#: lib/isodumper.py:201
+#: lib/isodumper.py:192
 msgid "An error occurred while creating a partition."
 msgstr "Ett fel inträffade när en partition skapades."
 
-#: lib/isodumper.py:205
+#: lib/isodumper.py:196
 msgid "Authentication error."
 msgstr "Autentiseringsfel."
 
-#: lib/isodumper.py:209
+#: lib/isodumper.py:200
 msgid "An error occurred."
 msgstr "Ett fel inträffade."
 
-#: lib/isodumper.py:226
+#: lib/isodumper.py:221
 msgid "Wrote: {}% "
 msgstr "Skrev: {}% "
 
-#: lib/isodumper.py:252
+#: lib/isodumper.py:247
 msgid "Backup confirmation"
 msgstr "Bekräfta säkerhetskopiering"
 
-#: lib/isodumper.py:252
+#: lib/isodumper.py:247
 msgid "Do you want to overwrite the file?"
 msgstr "Vill du skriva över filen?"
 
-#: lib/isodumper.py:260
+#: lib/isodumper.py:255
 #, python-format
 msgid ""
 "The destination directory is too small to receive the backup (%s Mb needed)"
 msgstr "Målmappen är för liten för att ta lagra säkerhetskopian (%s Mb behövs)"
 
-#: lib/isodumper.py:266 lib/isodumper.py:541 lib/isodumper.py:698
+#: lib/isodumper.py:261 lib/isodumper.py:556 lib/isodumper.py:732
 msgid "Backup to:"
 msgstr "Säkerhetskopiera till:"
 
-#: lib/isodumper.py:279
+#: lib/isodumper.py:274
 #, python-brace-format
 msgid "{source} successfully written to {target}"
 msgstr "{source} skrevs till {target}"
 
-#: lib/isodumper.py:301
+#: lib/isodumper.py:296
 msgid "The device is too small to contain the ISO file."
 msgstr "Enheten är för liten för att rymma ISO-filen."
 
-#: lib/isodumper.py:305
+#: lib/isodumper.py:300
 msgid "Writing confirmation"
 msgstr "Bekräfta skrivning"
 
-#: lib/isodumper.py:308
+#: lib/isodumper.py:303
 msgid "The device is bigger than 32 Gbytes. Are you sure you want use it?"
 msgstr ""
 "Enheten är större än 32 Gbytes. Är du säker på att du vill använda den?"
 
-#: lib/isodumper.py:308 lib/isodumper.py:380
+#: lib/isodumper.py:303 lib/isodumper.py:386
 msgid "Warning"
 msgstr "Varning"
 
-#: lib/isodumper.py:315
+#: lib/isodumper.py:310
 #, python-brace-format
 msgid "Writing {source} to {target}"
 msgstr "Skriver {source} till {target}"
 
-#: lib/isodumper.py:316
+#: lib/isodumper.py:311
 msgid " to "
 msgstr " till "
 
-#: lib/isodumper.py:316
+#: lib/isodumper.py:311
 msgid "Executing copy from "
 msgstr "Kör kopia från"
 
-#: lib/isodumper.py:333
+#: lib/isodumper.py:327
 #, python-brace-format
 msgid "Image {source} successfully written to {target}"
 msgstr "Avbilden {source} skrevs framgångsrikt till {target}"
 
-#: lib/isodumper.py:334
+#: lib/isodumper.py:328
 msgid "Bytes written: "
 msgstr "Bytes skrivna:"
 
-#: lib/isodumper.py:335
+#: lib/isodumper.py:329
 msgid "Checking "
 msgstr "Kontrollerar"
 
-#: lib/isodumper.py:353
+#: lib/isodumper.py:347
 msgid "Adding persistent partition"
 msgstr "Lägger till permanent partition"
 
-#: lib/isodumper.py:355
+#: lib/isodumper.py:350
+msgid "No key for encrypted partition provided. Adding the partition aborted."
+msgstr ""
+
+#: lib/isodumper.py:354
+msgid "Added encrypted persistent partition"
+msgstr ""
+
+#: lib/isodumper.py:359
 msgid "Added persistent partition"
 msgstr "Lade till permanent partition"
 
-#: lib/isodumper.py:368
+#: lib/isodumper.py:374
+msgid "Success"
+msgstr "Lyckades"
+
+#: lib/isodumper.py:374
 msgid ""
 "The operation completed successfully.\n"
 " You are free to unplug it now, a logfile \n"
@@ -240,7 +261,7 @@ msgstr ""
 "(/home/-user- eller root)/.isodumper/isodumper.log kommer att sparas när du "
 "stänger programmet."
 
-#: lib/isodumper.py:380
+#: lib/isodumper.py:386
 msgid ""
 "Writing is in progress. Exiting during writing \n"
 "            will make the device or the backup unusable.\n"
@@ -250,86 +271,111 @@ msgstr ""
 "kommer att göra enheten eller säkerhetskopian oanvändbar.\n"
 "Är du säker på att du vill avbryta skrivningen?"
 
-#: lib/isodumper.py:392 lib/isodumper.py:476
+#: lib/isodumper.py:398 lib/isodumper.py:482
 msgid "Error"
 msgstr "Fel"
 
-#: lib/isodumper.py:432
+#: lib/isodumper.py:438
 msgid "Image "
 msgstr "Avbild"
 
-#: lib/isodumper.py:436 lib/isodumper.py:498
+#: lib/isodumper.py:442 lib/isodumper.py:504
 msgid "IsoDumper"
 msgstr "IsoDumper"
 
-#: lib/isodumper.py:436
+#: lib/isodumper.py:442
+msgid "Mageia IsoDumper"
+msgstr ""
+
+#: lib/isodumper.py:444
 msgid ""
-"Mageia IsoDumper<BR />----------------<BR />This GUI program is primarily "
-"for safely writing a bootable ISO image to a USB flash drive, an operation "
-"devious & potentially hazardous when done by hand. As a bonus, it can also "
-"back up theentire previous<BR />contents of the flash drive onto the hard "
-"disc, and restore the flash drive to its previous state subsequently.<BR /"
-">It gives also a feature for formatting the USB device.<BR /><BR />IsoDumper "
-"can be launched either from the menus, or a user or root console with the "
-"command 'isodumper'.<BR />For normal users, the root password is solicited; "
-"this is necessary for the program's operation. <BR />The flash drive can be "
-"inserted beforehand or once the program is started. In the latter case, a "
-"dialogue will say that there is no flash drive inserted, and allow a 'retry' "
-"to find it once it is. <BR />(You may have to close any automatically opened "
-"File Manager window).<BR /><BR />The fields of the main window are as "
-"follows:<BR />- Device to work on: the device of the USB flash drive, a drop-"
-"down list to choose from.<BR />- Write Image: to choose the source ISO image "
-"*.iso (or flash drive backup file *.img) to write out.<BR />- Write to "
-"device: This button launches the operation - with a prior warning dialogue. "
-"<BR />The operation is shown in the progress bar beneath.<BR />- Backup to: "
-"define the name and placement of the backup image file. The current flash "
-"drive will be backed up to a disc file. Note that the entire flash drive is "
-"preserved, regardless of its actual contents; ensure that you have the "
-"necessary free disc space (the same size as the USB device). This backup "
-"file can be used later to restore the flash drive by selecting it as the "
-"source *.img file to write out.<BR />- Backup the device: launch the backup "
-"operation.<BR />- Format the device:  create an unique partition on the "
-"entire volume in the specified format in FAT, NTFS or ext. You can specify a "
-"volume name and the format in a new dialog box.<BR />"
-msgstr ""
-"Mageia IsoDumper <BR />----------------<BR /> Det här grafiska programmet är "
-"först och främst till för att säkert skriva en startbar ISO-fil till ett USB-"
-"minne, något som är jobbigt och eventuellt farligt när det görs för hand. "
-"Som en bonus kan det även säkerhetskopiera allt tidigare innehåll på USB-"
-"minnet till en hårddisk, och därefter återställa det till sitt ursprungliga "
-"tillstånd. Det kan även formatera USB-enheten. IsoDumper kan startas "
-"antingen från menyerna eller från en konsol av en vanlig användare eller som "
-"root med kommandot 'isodumper'. För vanliga användare krävs root-lösenordet, "
-"detta för att programmet ska fungera korrekt. USB-enheten kan anslutas i "
-"förväg eller när programmet har startats. I det senare fallet visas en "
-"dialogruta om att det inte finns någon enhet ansluten, men du kan försöka "
-"att hitta den igen när enheten är ansluten (du behöver kanske stänga "
-"eventuella filhanterare som har öppnats automatiskt). Alternativen i "
-"huvudfönstret är följande: - Enhet att arbeta med: En USB-enhet som visas i "
-"en rullgardinsmeny där du kan välja. - Skriv avbild: Välj en ISO-fil som "
-"källa *.iso (eller en flash-avbild *.img) att skriva från. - Skriv till "
-"enhet: Den här knappen startar operationen med en förvarnande dialogruta. Om "
-"du valt att säkerhetskopiera enheten kommer detta att utföras först. Sedan "
-"(eller enbart) blir ISO-filen skriven. Varje steg visas i förloppsindikatorn "
-"nedan. - Säkerhetskopiera till: Välj namn och plats för backup-filen. "
-"Aktuell enhet kommer att kopieras till en disk-avbild. Observera att hela "
-"enheten är bevarad oavsett innehåll. Se till att du har tillräckligt med "
-"ledigt utrymme (samma storlek som själva enheten). Denna backup kan sedan "
-"användas för att återställa enheten genom att välja den som käll-fil *.img "
-"vid skrivning. - Säkerhetskopiera enheten: Starta säkerhetskopieringen. - "
-"Formatera enheten: Skapa en unik partition på hela enheten i valt filsystem, "
-"FAT, NTFS eller ext. Du kan välja volymnamn och filsystem i en dialogruta. - "
-"Detaljer: Den här knappen visar logginformation."
-
-#: lib/isodumper.py:476
+"This GUI program is primarily for safely writing a bootable ISO image to a "
+"USB flash drive, an operation devious & potentially hazardous when done by "
+"hand. As a bonus, it can also back up the entire previous contents of the "
+"flash drive onto the hard disc, and restore the flash drive to its previous "
+"state subsequently."
+msgstr ""
+
+#: lib/isodumper.py:448
+msgid "It gives also a feature for formatting the USB device."
+msgstr ""
+
+#: lib/isodumper.py:449
+msgid ""
+"IsoDumper can be launched either from the menus, or a user console with the "
+"command 'isodumper'."
+msgstr ""
+
+#: lib/isodumper.py:450
+msgid ""
+"The root password is solicited when this is necessary for the program's "
+"operation."
+msgstr ""
+
+#: lib/isodumper.py:451
+msgid ""
+"The flash drive can be inserted beforehand or once the program is started. "
+"In the latter case, a dialogue will say that there is no flash drive "
+"inserted, and allow a 'retry' to find it once it is. <BR />(You may have to "
+"close any automatically opened File Manager window)."
+msgstr ""
+
+#: lib/isodumper.py:454
+msgid ""
+"The fields of the main window are as follows:<BR />- Device to work on: the "
+"device of the USB flash drive, a drop-down list to choose from.<BR />- Write "
+"Image: to choose the source ISO image *.iso (or flash drive backup file *."
+"img) to write out.<BR />- Write to device: This button launches the "
+"operation - with a prior warning dialogue."
+msgstr ""
+
+#: lib/isodumper.py:458
+msgid ""
+"- Add a persistent partition: the remaining space will be used in a new "
+"partition where data from the Live system can be written and recovered "
+"between sessions."
+msgstr ""
+
+#: lib/isodumper.py:459
+msgid ""
+"- Encrypt: the persistent partition will be encrypted with the key provided "
+"in <i>Key</i> field."
+msgstr ""
+
+#: lib/isodumper.py:460
+msgid "The operation is shown in the progress bar beneath."
+msgstr ""
+
+#: lib/isodumper.py:461
+msgid ""
+"- Backup to: define the name and placement of the backup image file. The "
+"current flash drive will be backed up to a disc file. Note that the entire "
+"flash drive is preserved, regardless of its actual contents; ensure that you "
+"have the necessary free disc space (the same size as the USB device). This "
+"backup file can be used later to restore the flash drive by selecting it as "
+"the source *.img file to write out."
+msgstr ""
+
+#: lib/isodumper.py:465
+msgid "- Backup the device: launch the backup operation."
+msgstr ""
+
+#: lib/isodumper.py:466
+msgid ""
+"- Format the device: create an unique partition on the entire volume in the "
+"specified format in FAT, exFAT, NTFS or ext. You can specify a volume name "
+"and the format in a new dialog box."
+msgstr ""
+
+#: lib/isodumper.py:482
 msgid "There is another instance of Isodumper already running."
 msgstr "Det finns redan en annan instans av isodumer som redan körs."
 
-#: lib/isodumper.py:490
+#: lib/isodumper.py:496
 msgid "Choose an image"
 msgstr "Välj en avbild"
 
-#: lib/isodumper.py:491
+#: lib/isodumper.py:497
 msgid ""
 "Warning\n"
 "This will destroy all data on the target device,\n"
@@ -342,107 +388,119 @@ msgstr ""
 "Är du säker på att du vill fortsätta?\n"
 "Om du väljer ok här så <b>koppla inte ur</b> enheten under operationen."
 
-#: lib/isodumper.py:525
+#: lib/isodumper.py:531
 msgid "Device to work on:"
 msgstr "Enhet att arbeta på:"
 
-#: lib/isodumper.py:529
+#: lib/isodumper.py:535
 msgid "Write Image:"
 msgstr "Skriv avbild:"
 
-#: lib/isodumper.py:535
+#: lib/isodumper.py:541
 msgid "&Write to device"
 msgstr "&Skriv till enheten"
 
-#: lib/isodumper.py:538
+#: lib/isodumper.py:546
 msgid "Add a persistent partition in the remaining space"
 msgstr "Lägg till en permanent partition i det lediga utrymmet."
 
-#: lib/isodumper.py:547
+#: lib/isodumper.py:548
+msgid "Encrypt partition"
+msgstr ""
+
+#: lib/isodumper.py:549
+msgid "Key:"
+msgstr ""
+
+#: lib/isodumper.py:562
 msgid "Backup the device"
 msgstr "Säkerhetskopiera enheten"
 
-#: lib/isodumper.py:550
-msgid "Format the device in FAT, NTFS or ext:"
-msgstr "Formatera enheten som FAT, NTFS eller ext:"
+#: lib/isodumper.py:565
+msgid "Format the device in FAT, exFAT, NTFS or ext:"
+msgstr ""
 
-#: lib/isodumper.py:552
+#: lib/isodumper.py:567
 msgid "Format the device"
 msgstr "Formatera enheten"
 
-#: lib/isodumper.py:555
+#: lib/isodumper.py:570
 msgid "Progress"
 msgstr "Förlopp"
 
-#: lib/isodumper.py:559
+#: lib/isodumper.py:574
 msgid "Report"
 msgstr "Rapport"
 
-#: lib/isodumper.py:562 lib/isodumper.py:666
+#: lib/isodumper.py:577 lib/isodumper.py:687
 msgid "Refresh"
 msgstr "Uppdatera"
 
-#: lib/isodumper.py:564
+#: lib/isodumper.py:579
 msgid "About"
 msgstr "Om"
 
-#: lib/isodumper.py:566
+#: lib/isodumper.py:581
 msgid "Help"
 msgstr "Hjälp"
 
-#: lib/isodumper.py:568
+#: lib/isodumper.py:583
 msgid "Quit"
 msgstr "Avsluta"
 
-#: lib/isodumper.py:574
+#: lib/isodumper.py:589
 msgid "UDisks2 is not available on your system"
 msgstr "UDisk2 är inte tillgängligt i ditt system"
 
-#: lib/isodumper.py:590
+#: lib/isodumper.py:605
 msgid "Label for the device:"
 msgstr "Enhetens etikett:"
 
-#: lib/isodumper.py:594
+#: lib/isodumper.py:609
 msgid "FAT 32 (Windows)"
 msgstr "FAT 32 (Windows)"
 
-#: lib/isodumper.py:596
+#: lib/isodumper.py:611
+msgid "exFAT (Windows)"
+msgstr ""
+
+#: lib/isodumper.py:613
 msgid "NTFS (Windows)"
 msgstr "NTFS (Windows)"
 
-#: lib/isodumper.py:598
+#: lib/isodumper.py:615
 msgid "ext4 (Linux)"
 msgstr "ext4 (Linux)"
 
-#: lib/isodumper.py:600
+#: lib/isodumper.py:617
 msgid "Execute"
 msgstr "Kör"
 
-#: lib/isodumper.py:601 lib/isodumper.py:667
+#: lib/isodumper.py:618 lib/isodumper.py:688
 msgid "Cancel"
 msgstr "Avbryt"
 
-#: lib/isodumper.py:638
+#: lib/isodumper.py:659
 msgid "OK"
 msgstr "OK"
 
-#: lib/isodumper.py:648
+#: lib/isodumper.py:669
 msgid "Yes"
 msgstr "Ja"
 
-#: lib/isodumper.py:649
+#: lib/isodumper.py:670
 msgid "No"
 msgstr "Nej"
 
-#: lib/isodumper.py:657
+#: lib/isodumper.py:678
 msgid "A tool for writing ISO images to  a device"
 msgstr "Ett verktyg för att skriva ISO-filer till en enhet"
 
-#: lib/isodumper.py:657
+#: lib/isodumper.py:678
 msgid "Oliver Grawert<BR />Papoteur<BR />Pictures : Timothée Giet"
 msgstr "Oliver Grawert<BR />Papoteur<BR />Bilder : Timothée Giet"
 
-#: lib/isodumper.py:665
+#: lib/isodumper.py:686
 msgid ""
 "Warning\n"
 "No target devices were found.\n"
@@ -468,3 +526,83 @@ msgstr "Ett grafiskt verktyg för att formatera USB-enheter"
 msgid "A GUI tool to write .img and .iso files to USB sticks"
 msgstr ""
 "Ett grafiskt verktyg för att skriva .img och .iso-filer till USB-enheter"
+
+#~ msgid "Format the device in FAT, NTFS or ext:"
+#~ msgstr "Formatera enheten som FAT, NTFS eller ext:"
+
+#~ msgid ""
+#~ "Mageia IsoDumper<BR />----------------<BR />This GUI program is primarily "
+#~ "for safely writing a bootable ISO image to a USB flash drive, an "
+#~ "operation devious & potentially hazardous when done by hand. As a bonus, "
+#~ "it can also back up theentire previous<BR />contents of the flash drive "
+#~ "onto the hard disc, and restore the flash drive to its previous state "
+#~ "subsequently.<BR />It gives also a feature for formatting the USB device."
+#~ "<BR /><BR />IsoDumper can be launched either from the menus, or a user or "
+#~ "root console with the command 'isodumper'.<BR />For normal users, the "
+#~ "root password is solicited; this is necessary for the program's "
+#~ "operation. <BR />The flash drive can be inserted beforehand or once the "
+#~ "program is started. In the latter case, a dialogue will say that there is "
+#~ "no flash drive inserted, and allow a 'retry' to find it once it is. <BR /"
+#~ ">(You may have to close any automatically opened File Manager window)."
+#~ "<BR /><BR />The fields of the main window are as follows:<BR />- Device "
+#~ "to work on: the device of the USB flash drive, a drop-down list to choose "
+#~ "from.<BR />- Write Image: to choose the source ISO image *.iso (or flash "
+#~ "drive backup file *.img) to write out.<BR />- Write to device: This "
+#~ "button launches the operation - with a prior warning dialogue. <BR />The "
+#~ "operation is shown in the progress bar beneath.<BR />- Backup to: define "
+#~ "the name and placement of the backup image file. The current flash drive "
+#~ "will be backed up to a disc file. Note that the entire flash drive is "
+#~ "preserved, regardless of its actual contents; ensure that you have the "
+#~ "necessary free disc space (the same size as the USB device). This backup "
+#~ "file can be used later to restore the flash drive by selecting it as the "
+#~ "source *.img file to write out.<BR />- Backup the device: launch the "
+#~ "backup operation.<BR />- Format the device:  create an unique partition "
+#~ "on the entire volume in the specified format in FAT, NTFS or ext. You can "
+#~ "specify a volume name and the format in a new dialog box.<BR />"
+#~ msgstr ""
+#~ "Mageia IsoDumper <BR />----------------<BR /> Det här grafiska programmet "
+#~ "är först och främst till för att säkert skriva en startbar ISO-fil till "
+#~ "ett USB-minne, något som är jobbigt och eventuellt farligt när det görs "
+#~ "för hand. Som en bonus kan det även säkerhetskopiera allt tidigare "
+#~ "innehåll på USB-minnet till en hårddisk, och därefter återställa det till "
+#~ "sitt ursprungliga tillstånd. Det kan även formatera USB-enheten. "
+#~ "IsoDumper kan startas antingen från menyerna eller från en konsol av en "
+#~ "vanlig användare eller som root med kommandot 'isodumper'. För vanliga "
+#~ "användare krävs root-lösenordet, detta för att programmet ska fungera "
+#~ "korrekt. USB-enheten kan anslutas i förväg eller när programmet har "
+#~ "startats. I det senare fallet visas en dialogruta om att det inte finns "
+#~ "någon enhet ansluten, men du kan försöka att hitta den igen när enheten "
+#~ "är ansluten (du behöver kanske stänga eventuella filhanterare som har "
+#~ "öppnats automatiskt). Alternativen i huvudfönstret är följande: - Enhet "
+#~ "att arbeta med: En USB-enhet som visas i en rullgardinsmeny där du kan "
+#~ "välja. - Skriv avbild: Välj en ISO-fil som källa *.iso (eller en flash-"
+#~ "avbild *.img) att skriva från. - Skriv till enhet: Den här knappen "
+#~ "startar operationen med en förvarnande dialogruta. Om du valt att "
+#~ "säkerhetskopiera enheten kommer detta att utföras först. Sedan (eller "
+#~ "enbart) blir ISO-filen skriven. Varje steg visas i förloppsindikatorn "
+#~ "nedan. - Säkerhetskopiera till: Välj namn och plats för backup-filen. "
+#~ "Aktuell enhet kommer att kopieras till en disk-avbild. Observera att hela "
+#~ "enheten är bevarad oavsett innehåll. Se till att du har tillräckligt med "
+#~ "ledigt utrymme (samma storlek som själva enheten). Denna backup kan sedan "
+#~ "användas för att återställa enheten genom att välja den som käll-fil *."
+#~ "img vid skrivning. - Säkerhetskopiera enheten: Starta "
+#~ "säkerhetskopieringen. - Formatera enheten: Skapa en unik partition på "
+#~ "hela enheten i valt filsystem, FAT, NTFS eller ext. Du kan välja "
+#~ "volymnamn och filsystem i en dialogruta. - Detaljer: Den här knappen "
+#~ "visar logginformation."
+
+#~ msgid "The sha512 sum check is OK but the signature can't be found"
+#~ msgstr ""
+#~ "Kontrollen av sha512-summan är okej men signatur-filen hittades inte"
+
+#~ msgid "The sha512 sum check is OK and the sum is signed"
+#~ msgstr "Kontrollen av sha512-summan är okej och signerad"
+
+#~ msgid "SHA512 sum: {}"
+#~ msgstr "SHA512 summa: {}"
+
+#~ msgid "Invalid signature for %s.sha512"
+#~ msgstr "Ogiltigt signatur för %s.sha512"
+
+#~ msgid "Sum SHA512 file {} not found\n"
+#~ msgstr "SHA512-filen {} hittades inte\n"
-- 
cgit v1.2.1