Update po files with the yui branch

1 files changed, 326 insertions, 237 deletions

diff --git a/po/zh_TW.po b/po/zh_TW.po
index 1209c5f..fb8541c 100644
--- a/po/zh_TW.po
+++ b/po/zh_TW.po
@@ -10,7 +10,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: isodumper\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-10-06 08:24+0200\n"
+"POT-Creation-Date: 2016-07-18 08:59+0200\n"
 "PO-Revision-Date: 2014-10-31 06:00+0800\n"
 "Last-Translator: You-Cheng Hsieh <yochenhsieh@gmail.com>\n"
 "Language-Team: Chinese (Taiwan) (http://www.transifex.com/projects/p/mageia/"
@@ -21,371 +21,460 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
 
-#: lib/isodumper.py:91
+#: lib/isodumper.py:123
 #, python-format
 msgid "%r not known to UDisks2"
 msgstr ""
 
-#: lib/isodumper.py:210
-msgid "UDisks2 is not available on your system"
-msgstr ""
-
-#: lib/isodumper.py:231
+#: lib/isodumper.py:190
 msgid "Mb"
 msgstr "Mb"
 
-#: lib/isodumper.py:247 lib/isodumper.py:410
+#: lib/isodumper.py:210
 msgid "Target Device: "
 msgstr "目標裝置： "
 
-#: lib/isodumper.py:271
-msgid "Backup in: "
-msgstr "備份在："
+#: lib/isodumper.py:232
+msgid "Backup to: "
+msgstr ""
+
+#: lib/isodumper.py:236
+msgid "Formatting confirmation"
+msgstr ""
 
-#: lib/isodumper.py:309
+#: lib/isodumper.py:241
 msgid "The device was formatted successfully."
 msgstr "裝置已經成功格式化了。"
 
-#: lib/isodumper.py:313
+#: lib/isodumper.py:245
 msgid "An error occurred while creating a partition."
 msgstr "建立磁碟區時發生了一個錯誤。"
 
-#: lib/isodumper.py:317
+#: lib/isodumper.py:249
 msgid "Authentication error."
 msgstr "認證錯誤。"
 
-#: lib/isodumper.py:321
+#: lib/isodumper.py:253
 msgid "An error occurred."
 msgstr "發生一個錯誤。"
 
-#: lib/isodumper.py:385
+#: lib/isodumper.py:290
+msgid "Backup confirmation"
+msgstr ""
+
+#: lib/isodumper.py:290
+msgid "Do you want to overwrite the file?"
+msgstr "您想要覆寫檔案嗎？"
+
+#: lib/isodumper.py:298
 #, python-format
 msgid ""
 "The destination directory is too small to receive the backup (%s Mb needed)"
 msgstr ""
 
-#: lib/isodumper.py:390 share/isodumper/isodumper.glade.h:50
-msgid "Backup in:"
-msgstr "備份在："
+#: lib/isodumper.py:304 lib/isodumper.py:666
+msgid "Backup to:"
+msgstr ""
 
-#: lib/isodumper.py:413
+#: lib/isodumper.py:324
 msgid "The device is too small to contain the ISO file."
 msgstr "這個裝置太小而放不下 ISO 檔案。"
 
-#: lib/isodumper.py:420
+#: lib/isodumper.py:328
+msgid "Writing confirmation"
+msgstr ""
+
+#: lib/isodumper.py:331
 msgid "The device is bigger than 32 Gbytes. Are you sure you want use it?"
 msgstr "這個裝置超過 32 GB。您確定要使用它嗎？"
 
-#: lib/isodumper.py:454
+#: lib/isodumper.py:331 lib/isodumper.py:508
+msgid "Warning"
+msgstr ""
+
+#: lib/isodumper.py:356
 msgid "Unmounting all partitions of "
 msgstr "卸載以下裝置的所有分區 "
 
-#: lib/isodumper.py:456
+#: lib/isodumper.py:358
 msgid "Trying to unmount "
 msgstr "嘗試卸載分區 "
 
-#: lib/isodumper.py:462
+#: lib/isodumper.py:362
+#, python-format
+msgid "Partition %s is busy"
+msgstr ""
+
+#: lib/isodumper.py:366
 msgid " was terminated by signal "
 msgstr " 被信號終止 "
 
-#: lib/isodumper.py:462 lib/isodumper.py:468
+#: lib/isodumper.py:366 lib/isodumper.py:372
 msgid "Error, umount "
 msgstr "出錯，卸載分區 "
 
-#: lib/isodumper.py:466
+#: lib/isodumper.py:370
 msgid " successfully unmounted"
 msgstr " 成功卸載裝置"
 
-#: lib/isodumper.py:468
+#: lib/isodumper.py:372
 msgid " returned "
 msgstr " 已返回 "
 
-#: lib/isodumper.py:471
+#: lib/isodumper.py:376
 msgid "Execution failed: "
 msgstr "執行失敗： "
 
-#: lib/isodumper.py:479
+#: lib/isodumper.py:385
 msgid "Could not read mtab !"
 msgstr "無法讀取 mtab！"
 
-#: lib/isodumper.py:489 lib/isodumper.py:518
+#: lib/isodumper.py:395 lib/isodumper.py:422
 msgid "Reading error."
 msgstr "讀取錯誤。"
 
-#: lib/isodumper.py:496
-msgid "You have not the rights for writing on the device"
-msgstr "您沒有權限寫入這個裝置"
+#: lib/isodumper.py:403
+msgid "You don't have permission to write to the device"
+msgstr ""
 
-#: lib/isodumper.py:502 lib/isodumper.py:503
+#: lib/isodumper.py:408 lib/isodumper.py:409
 msgid " to "
 msgstr " 至 "
 
-#: lib/isodumper.py:502
+#: lib/isodumper.py:408
 msgid "Writing "
 msgstr "正在寫入 "
 
-#: lib/isodumper.py:503
+#: lib/isodumper.py:409
 msgid "Executing copy from "
 msgstr "正在從這個來源複製"
 
-#: lib/isodumper.py:524 lib/isodumper.py:540 lib/isodumper.py:550
+#: lib/isodumper.py:429 lib/isodumper.py:443 lib/isodumper.py:453
 msgid "Writing error."
 msgstr "寫入錯誤。"
 
-#: lib/isodumper.py:530
+#: lib/isodumper.py:436
 msgid "Wrote: "
 msgstr "已寫入： "
 
-#: lib/isodumper.py:545
+#: lib/isodumper.py:448
 msgid " successfully written to "
 msgstr " 成功寫入到 "
 
-#: lib/isodumper.py:545 lib/isodumper.py:674
+#: lib/isodumper.py:448 lib/isodumper.py:567
 msgid "Image "
 msgstr "映像 "
 
-#: lib/isodumper.py:546
+#: lib/isodumper.py:449
 msgid "Bytes written: "
 msgstr "寫入位元組："
 
-#: lib/isodumper.py:559
+#: lib/isodumper.py:461
 msgid "Checking "
 msgstr ""
 
-#: lib/isodumper.py:586
+#: lib/isodumper.py:486
 msgid "SHA1 sum: "
 msgstr ""
 
-#: lib/isodumper.py:587
+#: lib/isodumper.py:487
 msgid "MD5  sum: "
 msgstr ""
 
-#: polkit/org.mageia.isodumper.policy.in.h:1
-msgid "Run Isodumper"
-msgstr "執行 Isodumper"
+#: lib/isodumper.py:496
+msgid "Success"
+msgstr ""
 
-#: polkit/org.mageia.isodumper.policy.in.h:2
-msgid "Authentication is required to run Isodumper"
-msgstr "執行 Isodumper 需要認證"
+#: lib/isodumper.py:496
+msgid ""
+"The operation completed successfully.\n"
+" You are free to unplug it now, a logfile \n"
+"(/home/-user- or /root)/.isodumper/isodumper.log will be saved when\n"
+" you close the application."
+msgstr ""
 
-#: share/applications/isodumper.desktop.in.h:1
-#: share/isodumper/isodumper.glade.h:1
+#: lib/isodumper.py:508
+msgid ""
+"Writing is in progress. Exiting during writing \n"
+"            will make the device or the backup unusable.\n"
+"            Are you sure you want to quit during writing?"
+msgstr ""
+
+#: lib/isodumper.py:520
+msgid "Error"
+msgstr ""
+
+#: lib/isodumper.py:571 lib/isodumper.py:625
 msgid "IsoDumper"
 msgstr "IsoDumper"
 
-#: share/applications/isodumper.desktop.in.h:2
-msgid "A GUI tool to write .img and .iso files to USB Keys"
-msgstr "一個寫入 .img 和 .iso 檔案到 USB 隨身碟的 GUI 工具"
-
-#: share/isodumper/isodumper.glade.h:2
+#: lib/isodumper.py:571
 msgid ""
-"Writing is in progress. Exiting during writing will occur that the device or "
-"the backup will be unusable.\n"
-"Are you sure you want to quit during writing?"
+"Mageia IsoDumper<BR />----------------<BR />This GUI program is primarily "
+"for safely writing a bootable ISO image to a USB flash drive, an operation "
+"devious & potentially hazardous when done by hand. As a bonus, it can also "
+"back up theentire previous<BR />contents of the flash drive onto the hard "
+"disc, and restore the flash drive to its previous state subsequently.<BR /"
+">It gives also a feature for formatting the USB device.<BR /><BR />IsoDumper "
+"can be launched either from the menus, or a user or root console with the "
+"command 'isodumper'.<BR />For normal users, the root password is solicited; "
+"this is necessary for the program's operation. <BR />The flash drive can be "
+"inserted beforehand or once the program is started. In the latter case, a "
+"dialogue will say that there is no flash drive inserted, and allow a 'retry' "
+"to find it once it is. <BR />(You may have to close any automatically opened "
+"File Manager window).<BR /><BR />The fields of the main window are as "
+"follows:<BR />- Device to work on: the device of the USB flash drive, a drop-"
+"down list to choose from.<BR />- Write Image: to choose the source ISO image "
+"*.iso (or flash drive backup file *.img) to write out.<BR />- Write to "
+"device: This button launches the operation - with a prior warning dialogue. "
+"<BR />The operation is shown in the progress bar beneath.<BR />- Backup to: "
+"define the name and placement of the backup image file. The current flash "
+"drive will be backed up to a disc file. Note that the entire flash drive is "
+"preserved, regardless of its actual contents; ensure that you have the "
+"necessary free disc space (the same size as the USB device). This backup "
+"file can be used later to restore the flash drive by selecting it as the "
+"source *.img file to write out.<BR />- Backup the device: launch the backup "
+"operation.<BR />- Format the device:  create an unique partition on the "
+"entire volume in the specified format in FAT, NTFS or ext. You can specify a "
+"volume name and the format in a new dialog box.<BR />"
 msgstr ""
-"寫入正在進行中。 在寫入中退出會導致該裝置或備份無法使用。\n"
-"您確定您想要在寫入時退出嗎?"
 
-#: share/isodumper/isodumper.glade.h:4
-msgid ""
-"A tool for writing ISO images on a USB stick. It's a fork of usb-imagewriter."
+#: lib/isodumper.py:617
+msgid "Choose an image"
 msgstr ""
-"一個將 ISO 映像檔寫到 USB 隨身碟上的工具。它是一個 usb-imagewriter 的分支版"
-"本。"
-
-#: share/isodumper/isodumper.glade.h:5
-msgid "Select"
-msgstr "選取"
 
-#: share/isodumper/isodumper.glade.h:6
+#: lib/isodumper.py:618
 msgid ""
-"<b>Warning</b>\n"
-" This will <b>destroy all data</b> on the target\n"
-" device, are you sure you want to proceed ?\n"
-"\n"
-" If you say ok here, please <b>do not unplug</b>\n"
-" the device during the following operation."
-msgstr ""
-"<b>警告</b>\n"
-" 這樣將會造成目標裝置上的<b>資料損壞</b>\n"
-" 確認要繼續嗎？\n"
-"\n"
-" 如果您回答是，請在執行下述操作時\n"
-" <b>不要移除裝置</b>"
-
-#: share/isodumper/isodumper.glade.h:12
-msgid "Do you want to overwrite the file?"
-msgstr "您想要覆寫檔案嗎？"
+"Warning\n"
+"This will destroy all data on the target device,\n"
+"        are you sure you want to proceed?\n"
+"        If you say ok here, please <b>do not unplug</b>        the device "
+"during the following operation."
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:13
-msgid ""
-"<b>Error</b>\n"
-" Something went wrong, please see the details\n"
-" window for the exact error.\n"
-"\n"
-" The application will be closed with this window, and a logfile\n"
-" (/home/-user- or /root)/.isodumper/isodumper.log will be saved."
-msgstr ""
-"<b>Error</b>\n"
-" 發生問題了，詳細錯誤請查看細節視窗。\n"
-"\n"
-" 應用程式將會關閉這個視窗，在您的家目錄/.isodumper 中\n"
-" 會有一個紀錄檔 isodumper.log "
-
-#: share/isodumper/isodumper.glade.h:19
-msgid "Label for the device:"
-msgstr "裝置的標籤:"
+#: lib/isodumper.py:653
+msgid "Device to work on:"
+msgstr "工作的裝置:"
 
-#: share/isodumper/isodumper.glade.h:20
-msgid "FAT 32 (Windows)"
-msgstr "FAT 32 (Windows)"
+#: lib/isodumper.py:657
+msgid "Write Image:"
+msgstr "寫入映像："
 
-#: share/isodumper/isodumper.glade.h:21
-msgid "The standard. The size of files are limited to 4Gb"
-msgstr "標準格式。檔案大小限制為 4GB"
+#: lib/isodumper.py:663
+msgid "&Write to device"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:22
-msgid "NTFS (Windows)"
-msgstr "NTFS (Windows)"
+#: lib/isodumper.py:672
+msgid "&Backup the device"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:23
-msgid "To handle files bigger than 4Gb"
-msgstr "可存放大於 4GB 的檔案"
+#: lib/isodumper.py:676
+msgid "Format the device in FAT, NTFS or ext:"
+msgstr "格式化裝置成 FAT, NTFS 或 ext:"
 
-#: share/isodumper/isodumper.glade.h:24
-msgid "ext4 (Linux)"
-msgstr "ext4 (Linux)"
+#: lib/isodumper.py:678
+msgid "&Format the device"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:25
-msgid "Only for Linux systems"
-msgstr "只能給 Linux 系統"
+#: lib/isodumper.py:682
+msgid "Progression"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:26
-msgid "Isodumper - Help"
+#: lib/isodumper.py:686
+msgid "Report"
 msgstr ""
 
-#: share/isodumper/isodumper.glade.h:27
-msgid ""
-"Mageia IsoDumper\n"
-"----------------\n"
-"This GUI program is primarily for safely writing a bootable ISO image to a "
-"USB flash drive, an operation devious & potentially hazardous when done by "
-"hand. As a bonus, it can also back up the entire previous contents of the "
-"flash drive onto the hard disc, and restore the flash drive to its previous "
-"state subsequently. It gives also a feature for formatting the USB device.\n"
-"\n"
-"IsoDumper can be launched either from the menus, or a user or root console "
-"with the command 'isodumper'. For normal users, the root password is "
-"solicited; this is necessary for the program's operation. The flash drive "
-"can be inserted beforehand or once the program is started. In the latter "
-"case, a dialogue will say that there is no flash drive inserted, and allow a "
-"'retry' to find it once it is. (You may have to close any automatically "
-"opened File Manager window).\n"
-"\n"
-"The fields of the main window are as follows:\n"
-"- Device to work on: the device of the USB flash drive, a drop-down list to "
-"choose from.\n"
-"- Write Image: to choose the source ISO image *.iso (or flash drive backup "
-"file *.img) to write out.\n"
-"- Write to device: This button launches the operation - with a prior warning "
-"dialogue. If a flash drive backup was requested, this is done first. Then "
-"(or only) the image file write. Each operation is shown in the progress bar "
-"beneath.\n"
-"- Backup in: define the name and placement of the backup image file. The "
-"current flash drive will be backed up to a disc file. Note that the entire "
-"flash drive is preserved, regardless of its actual contents; ensure that you "
-"have the necessary free disc space (the same size as the USB device). This "
-"backup file can be used later to restore the flash drive by selecting it as "
-"the source *.img file to write out.\n"
-"- Backup the device: launch the backup operation.\n"
-"- Format the device:  create an unique partition on the entire volume in the "
-"specified format in FAT, NTFS or ext. You can specify a volume name and the "
-"format in a new dialog box.\n"
-"- Details: this button shows detailed log information.\n"
-"\n"
-msgstr ""
-
-#: share/isodumper/isodumper.glade.h:43
-msgid "Device to work on:"
-msgstr "工作的裝置:"
+#: lib/isodumper.py:691 lib/isodumper.py:799
+msgid "&Refresh"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:44
-msgid "Select target device to write the image to"
-msgstr "選擇要寫入映像的目標裝置"
+#: lib/isodumper.py:693
+msgid "&About"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:45
-msgid "Write Image:"
-msgstr "寫入映像："
+#: lib/isodumper.py:695
+msgid "&Help"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:46
-msgid "Select an image file to be written to the device"
-msgstr "選擇一個要寫入到裝置的映像檔"
+#: lib/isodumper.py:697
+msgid "&Quit"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:47
-msgid "Select Image"
-msgstr "選擇映像"
+#: lib/isodumper.py:703
+msgid "UDisks2 is not available on your system"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:48
-msgid "Write to device"
-msgstr "寫入到裝置"
+#: lib/isodumper.py:722
+msgid "Label for the device:"
+msgstr "裝置的標籤:"
 
-#: share/isodumper/isodumper.glade.h:49
-msgid "Create a backup of the device as image to restore it later"
-msgstr "建立這個裝置的映像備份以便之後還原"
+#: lib/isodumper.py:726
+msgid "FAT 32 (Windows)"
+msgstr "FAT 32 (Windows)"
 
-#: share/isodumper/isodumper.glade.h:52
-msgid "(None)"
-msgstr "(無)"
+#: lib/isodumper.py:728
+msgid "NTFS (Windows)"
+msgstr "NTFS (Windows)"
 
-#: share/isodumper/isodumper.glade.h:53
-msgid "Select a folder in which to write the backup image"
-msgstr "選擇一個目錄以供寫入備份映像"
+#: lib/isodumper.py:730
+msgid "ext4 (Linux)"
+msgstr "ext4 (Linux)"
 
-#: share/isodumper/isodumper.glade.h:54
-msgid "Backup the device"
-msgstr "備份裝置"
+#: lib/isodumper.py:732
+msgid "Execute"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:55
-msgid "Format the device in FAT, NTFS or ext:"
-msgstr "格式化裝置成 FAT, NTFS 或 ext:"
+#: lib/isodumper.py:733 lib/isodumper.py:800
+msgid "Cancel"
+msgstr ""
+
+#: lib/isodumper.py:790
+msgid "A tool for writing ISO images to  a device"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:56
-msgid "Choose the format. The device will be formatted in one partition"
-msgstr "選擇格式。該裝置會被格式化成一個磁碟區"
+#: lib/isodumper.py:798
+msgid ""
+"Warning\n"
+"No target devices were found.\n"
+"You need to plug in a USB Key to which the image can be written."
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:57
-msgid "Format the device"
-msgstr "格式化裝置"
+#: polkit/org.mageia.isodumper.policy.in.h:1
+msgid "Run Isodumper"
+msgstr "執行 Isodumper"
 
-#: share/isodumper/isodumper.glade.h:58
-msgid "Details"
-msgstr "詳細資料"
+#: polkit/org.mageia.isodumper.policy.in.h:2
+msgid "Authentication is required to run Isodumper"
+msgstr "執行 Isodumper 需要認證"
 
-#: share/isodumper/isodumper.glade.h:59
-msgid ""
-"<b>Warning</b>\n"
-" No target devices were found. \n"
-"\n"
-" You need to plug in a USB Key\n"
-" to which the image can be written."
-msgstr ""
-"<b>警告 </b>\n"
-" 找不到目標裝置。\n"
-"\n"
-" 您需要插入一個 USB 隨身碟\n"
-" 以便寫入映像檔。"
-
-#: share/isodumper/isodumper.glade.h:64
-msgid ""
-"<b>Success</b>\n"
-" The operation was successfully performed.\n"
-" \n"
-" You are free to unplug it now, a logfile\n"
-" (/home/-user- or /root)/.isodumper/isodumper.log will be saved when\n"
-" you close the application."
+#: share/applications/isodumper.desktop.in.h:1
+msgid "A GUI tool to write .img and .iso files to USB sticks"
 msgstr ""
-"<b>成功</b>\n"
-" 作業已經成功完成了。\n"
-" \n"
-" 您可以現在將它取出, 當您關閉程式的時候，一個檔案 isodumper.log 會被存在您的"
-"家目錄/.isodumper/"
+
+#~ msgid ""
+#~ "<b>Success</b>\n"
+#~ " The operation was successfully performed.\n"
+#~ " \n"
+#~ " You are free to unplug it now, a logfile\n"
+#~ " (/home/-user- or /root)/.isodumper/isodumper.log will be saved when\n"
+#~ " you close the application."
+#~ msgstr ""
+#~ "<b>成功</b>\n"
+#~ " 作業已經成功完成了。\n"
+#~ " \n"
+#~ " 您可以現在將它取出, 當您關閉程式的時候，一個檔案 isodumper.log 會被存在您"
+#~ "的家目錄/.isodumper/"
+
+#~ msgid ""
+#~ "<b>Warning</b>\n"
+#~ " No target devices were found. \n"
+#~ "\n"
+#~ " You need to plug in a USB Key\n"
+#~ " to which the image can be written."
+#~ msgstr ""
+#~ "<b>警告 </b>\n"
+#~ " 找不到目標裝置。\n"
+#~ "\n"
+#~ " 您需要插入一個 USB 隨身碟\n"
+#~ " 以便寫入映像檔。"
+
+#~ msgid "Details"
+#~ msgstr "詳細資料"
+
+#~ msgid "Format the device"
+#~ msgstr "格式化裝置"
+
+#~ msgid "Choose the format. The device will be formatted in one partition"
+#~ msgstr "選擇格式。該裝置會被格式化成一個磁碟區"
+
+#~ msgid "Backup the device"
+#~ msgstr "備份裝置"
+
+#~ msgid "Select a folder in which to write the backup image"
+#~ msgstr "選擇一個目錄以供寫入備份映像"
+
+#~ msgid "(None)"
+#~ msgstr "(無)"
+
+#~ msgid "Create a backup of the device as image to restore it later"
+#~ msgstr "建立這個裝置的映像備份以便之後還原"
+
+#~ msgid "Write to device"
+#~ msgstr "寫入到裝置"
+
+#~ msgid "Select Image"
+#~ msgstr "選擇映像"
+
+#~ msgid "Select an image file to be written to the device"
+#~ msgstr "選擇一個要寫入到裝置的映像檔"
+
+#~ msgid "Select target device to write the image to"
+#~ msgstr "選擇要寫入映像的目標裝置"
+
+#~ msgid "Only for Linux systems"
+#~ msgstr "只能給 Linux 系統"
+
+#~ msgid "To handle files bigger than 4Gb"
+#~ msgstr "可存放大於 4GB 的檔案"
+
+#~ msgid "The standard. The size of files are limited to 4Gb"
+#~ msgstr "標準格式。檔案大小限制為 4GB"
+
+#~ msgid ""
+#~ "<b>Error</b>\n"
+#~ " Something went wrong, please see the details\n"
+#~ " window for the exact error.\n"
+#~ "\n"
+#~ " The application will be closed with this window, and a logfile\n"
+#~ " (/home/-user- or /root)/.isodumper/isodumper.log will be saved."
+#~ msgstr ""
+#~ "<b>Error</b>\n"
+#~ " 發生問題了，詳細錯誤請查看細節視窗。\n"
+#~ "\n"
+#~ " 應用程式將會關閉這個視窗，在您的家目錄/.isodumper 中\n"
+#~ " 會有一個紀錄檔 isodumper.log "
+
+#~ msgid ""
+#~ "<b>Warning</b>\n"
+#~ " This will <b>destroy all data</b> on the target\n"
+#~ " device, are you sure you want to proceed ?\n"
+#~ "\n"
+#~ " If you say ok here, please <b>do not unplug</b>\n"
+#~ " the device during the following operation."
+#~ msgstr ""
+#~ "<b>警告</b>\n"
+#~ " 這樣將會造成目標裝置上的<b>資料損壞</b>\n"
+#~ " 確認要繼續嗎？\n"
+#~ "\n"
+#~ " 如果您回答是，請在執行下述操作時\n"
+#~ " <b>不要移除裝置</b>"
+
+#~ msgid "Select"
+#~ msgstr "選取"
+
+#~ msgid ""
+#~ "A tool for writing ISO images on a USB stick. It's a fork of usb-"
+#~ "imagewriter."
+#~ msgstr ""
+#~ "一個將 ISO 映像檔寫到 USB 隨身碟上的工具。它是一個 usb-imagewriter 的分支"
+#~ "版本。"
+
+#~ msgid ""
+#~ "Writing is in progress. Exiting during writing will occur that the device "
+#~ "or the backup will be unusable.\n"
+#~ "Are you sure you want to quit during writing?"
+#~ msgstr ""
+#~ "寫入正在進行中。 在寫入中退出會導致該裝置或備份無法使用。\n"
+#~ "您確定您想要在寫入時退出嗎?"
+
+#~ msgid "A GUI tool to write .img and .iso files to USB Keys"
+#~ msgstr "一個寫入 .img 和 .iso 檔案到 USB 隨身碟的 GUI 工具"
+
+#~ msgid "You have not the rights for writing on the device"
+#~ msgstr "您沒有權限寫入這個裝置"
+
+#~ msgid "Backup in:"
+#~ msgstr "備份在："
+
+#~ msgid "Backup in: "
+#~ msgstr "備份在："