Updat po files

1 files changed, 392 insertions, 297 deletions

diff --git a/po/et.po b/po/et.po
index 83ae142..58bc5ee 100644
--- a/po/et.po
+++ b/po/et.po
@@ -10,7 +10,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: isodumper\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-03-08 09:28+0100\n"
+"POT-Creation-Date: 2016-04-10 10:50+0200\n"
 "PO-Revision-Date: 2015-01-26 13:42+0000\n"
 "Last-Translator: Marek Laane <bald@smail.ee>\n"
 "Language-Team: Estonian (http://www.transifex.com/projects/p/mageia/language/"
@@ -21,441 +21,536 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 
-#: lib/isodumper.py:103
+#: lib/isodumper.py:123
 #, python-format
 msgid "%r not known to UDisks2"
 msgstr "UDisks2 ei tunne %r"
 
-#: lib/isodumper.py:263
-msgid "UDisks2 is not available on your system"
-msgstr "UDisks2 ei ole Teie süsteemis saadaval"
-
-#: lib/isodumper.py:284
+#: lib/isodumper.py:189
 msgid "Mb"
 msgstr "Mb"
 
-#: lib/isodumper.py:300 lib/isodumper.py:466
+#: lib/isodumper.py:209
 msgid "Target Device: "
 msgstr "Sihtseade: "
 
-#: lib/isodumper.py:324
+#: lib/isodumper.py:231
 msgid "Backup to: "
 msgstr "Varukoopia:"
 
-#: lib/isodumper.py:362 lib/isodumper.py:504
+#: lib/isodumper.py:235
+msgid "Formatting confirmation"
+msgstr ""
+
+#: lib/isodumper.py:240
 msgid "The device was formatted successfully."
 msgstr "Seade vormindati edukalt."
 
-#: lib/isodumper.py:366 lib/isodumper.py:496
+#: lib/isodumper.py:244
 msgid "An error occurred while creating a partition."
 msgstr "Partitsiooni loomisel tekkis tõrge."
 
-#: lib/isodumper.py:370 lib/isodumper.py:500
+#: lib/isodumper.py:248
 msgid "Authentication error."
 msgstr "Tõrge autentimisel."
 
-#: lib/isodumper.py:374 lib/isodumper.py:540
+#: lib/isodumper.py:252
 msgid "An error occurred."
 msgstr "Tekkis tõrge."
 
-#: lib/isodumper.py:438
+#: lib/isodumper.py:289
+msgid "Backup confirmation"
+msgstr ""
+
+#: lib/isodumper.py:289
+msgid "Do you want to overwrite the file?"
+msgstr "Kas kirjutada fail üle?"
+
+#: lib/isodumper.py:297
 #, python-format
 msgid ""
 "The destination directory is too small to receive the backup (%s Mb needed)"
 msgstr "Sihtkataloog on varukoopia jaoks liiga väike (vajalik on %s Mb)"
 
-#: lib/isodumper.py:443 share/isodumper/isodumper.glade.h:52
+#: lib/isodumper.py:303 lib/isodumper.py:652
 msgid "Backup to:"
 msgstr "Varukoopia:"
 
-#: lib/isodumper.py:469
+#: lib/isodumper.py:323
 msgid "The device is too small to contain the ISO file."
 msgstr "Seade on ISO-tõmmise mahutamiseks liiga väike."
 
-#: lib/isodumper.py:476
+#: lib/isodumper.py:327
+msgid "Writing confirmation"
+msgstr ""
+
+#: lib/isodumper.py:330
 msgid "The device is bigger than 32 Gbytes. Are you sure you want use it?"
 msgstr "Seadme maht on üle 32 gigabaidi. Kas tõesti soovite seda kasutada?"
 
-#: lib/isodumper.py:519 lib/isodumper.py:537
-#, python-format
-msgid "Error mounting the partition %s"
-msgstr "Tõrge partitsiooni %s haakimisel"
-
-#: lib/isodumper.py:523
-msgid "Mounted in: "
-msgstr "Haakimise asukoht: "
-
-#: lib/isodumper.py:533
-msgid "Error copying files"
-msgstr "Tõrge failide kopeerimisel"
+#: lib/isodumper.py:330 lib/isodumper.py:507
+msgid "Warning"
+msgstr ""
 
-#: lib/isodumper.py:565
+#: lib/isodumper.py:355
 msgid "Unmounting all partitions of "
 msgstr "Haagitakse lahti kõik partitsioonid seadmes "
 
-#: lib/isodumper.py:567
+#: lib/isodumper.py:357
 msgid "Trying to unmount "
 msgstr "Proovitakse lahti haakida "
 
-#: lib/isodumper.py:573
+#: lib/isodumper.py:361
+#, python-format
+msgid "Partition %s is busy"
+msgstr ""
+
+#: lib/isodumper.py:365
 msgid " was terminated by signal "
 msgstr " lahtihaakimine katkestati signaaliga "
 
-#: lib/isodumper.py:573 lib/isodumper.py:579
+#: lib/isodumper.py:365 lib/isodumper.py:371
 msgid "Error, umount "
 msgstr "Tõrge, "
 
-#: lib/isodumper.py:577
+#: lib/isodumper.py:369
 msgid " successfully unmounted"
 msgstr " haagiti edukalt lahti"
 
-#: lib/isodumper.py:579
+#: lib/isodumper.py:371
 msgid " returned "
 msgstr " lahtihaakimine tagastas koodi "
 
-#: lib/isodumper.py:582
+#: lib/isodumper.py:375
 msgid "Execution failed: "
 msgstr "Täitmine nurjus: "
 
-#: lib/isodumper.py:590
+#: lib/isodumper.py:384
 msgid "Could not read mtab !"
 msgstr "Mtab-i lugemine nurjus!"
 
-#: lib/isodumper.py:600 lib/isodumper.py:629
+#: lib/isodumper.py:394 lib/isodumper.py:421
 msgid "Reading error."
 msgstr "Tõrge lugemisel."
 
-#: lib/isodumper.py:607
+#: lib/isodumper.py:402
 msgid "You don't have permission to write to the device"
 msgstr "Teil pole seadmes kirjutamisõigust."
 
-#: lib/isodumper.py:613 lib/isodumper.py:614 lib/isodumper.py:726
-#: lib/isodumper.py:727
+#: lib/isodumper.py:407 lib/isodumper.py:408
 msgid " to "
 msgstr " asukohta "
 
-#: lib/isodumper.py:613 lib/isodumper.py:726
+#: lib/isodumper.py:407
 msgid "Writing "
 msgstr "Kirjutatakse "
 
-#: lib/isodumper.py:614 lib/isodumper.py:727
+#: lib/isodumper.py:408
 msgid "Executing copy from "
 msgstr "Kopeeritakse asukohast "
 
-#: lib/isodumper.py:635 lib/isodumper.py:651 lib/isodumper.py:661
+#: lib/isodumper.py:428 lib/isodumper.py:442 lib/isodumper.py:452
 msgid "Writing error."
 msgstr "Tõrge kirjutamisel."
 
-#: lib/isodumper.py:641
+#: lib/isodumper.py:435
 msgid "Wrote: "
 msgstr "Kirjutati: "
 
-#: lib/isodumper.py:656 lib/isodumper.py:766
+#: lib/isodumper.py:447
 msgid " successfully written to "
 msgstr " kirjutati edukalt asukohta "
 
-#: lib/isodumper.py:656 lib/isodumper.py:766 lib/isodumper.py:854
+#: lib/isodumper.py:447 lib/isodumper.py:566
 msgid "Image "
 msgstr "Tõmmis "
 
-#: lib/isodumper.py:657
+#: lib/isodumper.py:448
 msgid "Bytes written: "
 msgstr "Baite kirjutati: "
 
-#: lib/isodumper.py:670
+#: lib/isodumper.py:460
 msgid "Checking "
 msgstr "Kontrollitakse "
 
-#: lib/isodumper.py:697
+#: lib/isodumper.py:485
 msgid "SHA1 sum: "
 msgstr "SHA1 summa: "
 
-#: lib/isodumper.py:698
+#: lib/isodumper.py:486
 msgid "MD5  sum: "
 msgstr "MD5  summa: "
 
-#: lib/isodumper.py:723
-msgid "ISO image mounted in "
-msgstr "ISO-tõmmis on haagitud kataloogis "
+#: lib/isodumper.py:495
+msgid "Success"
+msgstr ""
 
-#: lib/isodumper.py:731
-#, python-format
-msgid "%s file(s) to copy."
-msgstr "%s fail(i) kopeerida."
+#: lib/isodumper.py:495
+msgid ""
+"The operation completed successfully.<BR /> You are free to unplug it now, a "
+"log isodumper.log<BR /> of the operation will be saved in your homedir/."
+"isodumper/ when<BR /> you close the application."
+msgstr ""
 
-#: polkit/org.mageia.isodumper.policy.in.h:1
-msgid "Run Isodumper"
-msgstr "IsoDumperi käivitamine"
+#: lib/isodumper.py:507
+msgid ""
+"Writing is in progress. Exiting during writing <BR />            will make "
+"the device or the backup unusable.<BR />            Are you sure you want to "
+"quit during writing?"
+msgstr ""
 
-#: polkit/org.mageia.isodumper.policy.in.h:2
-msgid "Authentication is required to run Isodumper"
-msgstr "IsoDumperi käivitamine nõuab autentimist"
+#: lib/isodumper.py:519
+msgid "Error"
+msgstr ""
 
+#: lib/isodumper.py:570 lib/isodumper.py:611
 #: share/applications/isodumper.desktop.in.h:1
-#: share/isodumper/isodumper.glade.h:1
 msgid "IsoDumper"
 msgstr "IsoDumper"
 
-#: share/applications/isodumper.desktop.in.h:2
-msgid "A GUI tool to write .img and .iso files to USB sticks"
-msgstr "Rakendus .img- ja .iso-failide kirjutamiseks USB-pulgale"
-
-#: share/isodumper/isodumper.glade.h:2
+#: lib/isodumper.py:570
 msgid ""
-"Writing is in progress. Exiting during writing will make the device or "
-"the backup unusable.\n"
-"Are you sure you want to quit during writing?"
+"Mageia IsoDumper<BR />----------------<BR />This GUI program is primarily "
+"for safely writing a bootable ISO image to a USB flash drive, <BR />an "
+"operation devious & potentially hazardous when done by hand. As a bonus, it "
+"can also back up the entire previous<BR />contents of the flash drive onto "
+"the hard disc, and restore the flash drive to its previous state "
+"subsequently.<BR /> It gives also a feature for formatting the USB device."
+"<BR /><BR />IsoDumper can be launched either from the menus, or a user or "
+"root console with the command 'isodumper'.<BR />For normal users, the root "
+"password is solicited; this is necessary for the program's operation. <BR /"
+">The flash drive can be inserted beforehand or once the program is started. "
+"In the latter case, a dialogue will say <BR />that there is no flash drive "
+"inserted, and allow a 'retry' to find it once it is. <BR />(You may have to "
+"close any automatically opened File Manager window).<BR /><BR />The fields "
+"of the main window are as follows:<BR />- Device to work on: the device of "
+"the USB flash drive, a drop-down list to choose from.<BR />- Write Image: to "
+"choose the source ISO image *.iso (or flash drive backup file *.img) to "
+"write out.<BR />- Write to device: This button launches the operation - with "
+"a prior warning dialogue. <BR />The operation is shown in the progress bar "
+"beneath.<BR />- Backup to: define the name and placement of the backup image "
+"file. The current flash <BR />drive will be backed up to a disc file. Note "
+"that the entire flash drive is preserved, regardless of its actual contents;"
+"<BR /> ensure that you have the necessary free disc space (the same size as "
+"the USB device). <BR />This backup file can be used later to restore the "
+"flash drive by selecting it as the source *.img file to write out.<BR />- "
+"Backup the device: launch the backup operation.<BR />- Format the device:  "
+"create an unique partition on the entire volume in the specified format in "
+"FAT, <BR />NTFS or ext. You can specify a volume name and the format in a "
+"new dialog box.<BR />"
 msgstr ""
-"Kirjutamine käib. Väljumise korral kirjutamise ajal võib seade või "
-"varukoopia muutuda kasutamiskõlbmatuks.\n"
-"Kas tõesti väljuda kirjutamise ajal?"
 
-#: share/isodumper/isodumper.glade.h:4
-msgid ""
-"A tool for writing ISO images on a USB stick. It's a fork of usb-imagewriter."
+#: lib/isodumper.py:603
+msgid "Choose an image"
 msgstr ""
-"Tööriist ISO-tõmmiste kirjutamiseks USB-pulgale. See on programmi usb-"
-"imagewriter edasiarendus."
-
-#: share/isodumper/isodumper.glade.h:5
-msgid "Select"
-msgstr "Vali"
 
-#: share/isodumper/isodumper.glade.h:6
+#: lib/isodumper.py:604
 msgid ""
-"<b>Warning</b>\n"
-" This will <b>destroy all data</b> on the target\n"
-" device, are you sure you want to proceed ?\n"
-"\n"
-" If you say ok here, please <b>do not unplug</b>\n"
-" the device during the following operation."
+"Warning<BR />This will destroy all data on the target device,<BR />        "
+"are you sure you want to proceed?<BR />        If you say ok here, please "
+"<b>do not unplug</b>        the device during the following operation."
 msgstr ""
-"<b>Hoiatus</b>\n"
-" See <b>hävitab kõik andmed</b> sihtseadmes,\n"
-" kas tõesti jätkata?\n"
-"\n"
-" Kui olete kindel, palun <b>ärge lahutage</b>\n"
-" seadet selle operatsiooni jooksul."
-
-#: share/isodumper/isodumper.glade.h:12
-msgid "Do you want to overwrite the file?"
-msgstr "Kas kirjutada fail üle?"
-
-#: share/isodumper/isodumper.glade.h:13
-msgid ""
-"<b>Error</b>\n"
-" Something went wrong, please see the details\n"
-" window for the exact error.\n"
-"\n"
-" The application will be closed with this window, and a logfile\n"
-" isodumper.log  will be saved in your homedir/.isodumper "
-msgstr ""
-"<b>Tõrge</b>\n"
-" Midagi läks valesti. Palun vaadake üksikasju \n"
-" täpse veateate aknast.\n"
-" \n"
-"Rakendus suletakse ning logifail \n"
-"isodumper.log salvestatakse kodukataloogi \n"
-"alamkataloogis .isodumper."
-
-#: share/isodumper/isodumper.glade.h:19
-msgid "Label for the device:"
-msgstr "Seadme nimi:"
 
-#: share/isodumper/isodumper.glade.h:20
-msgid "FAT 32 (Windows)"
-msgstr "FAT 32 (Windows)"
-
-#: share/isodumper/isodumper.glade.h:21
-msgid "The standard. The size of files are limited to 4Gb"
-msgstr "Standardne. Failide suuruseks on kuni 4 Gb."
-
-#: share/isodumper/isodumper.glade.h:22
-msgid "NTFS (Windows)"
-msgstr "NTFS (Windows)"
-
-#: share/isodumper/isodumper.glade.h:23
-msgid "To handle files bigger than 4Gb"
-msgstr "Suurematele kui 4 Gb failidele."
-
-#: share/isodumper/isodumper.glade.h:24
-msgid "ext4 (Linux)"
-msgstr "ext4 (Linux)"
-
-#: share/isodumper/isodumper.glade.h:25
-msgid "Only for Linux systems"
-msgstr "Ainult Linuxi süsteemidele."
-
-#: share/isodumper/isodumper.glade.h:26
-msgid "Isodumper - Help"
-msgstr "Isodumper - Abi"
-
-#: share/isodumper/isodumper.glade.h:27
-msgid ""
-"Mageia IsoDumper\n"
-"----------------\n"
-"This GUI program is primarily for safely writing a bootable ISO image to a "
-"USB flash drive, an operation devious & potentially hazardous when done by "
-"hand. As a bonus, it can also back up the entire previous contents of the "
-"flash drive onto the hard disc, and restore the flash drive to its previous "
-"state subsequently. It gives also a feature for formatting the USB device.\n"
-"\n"
-"IsoDumper can be launched either from the menus, or a user or root console "
-"with the command 'isodumper'. For normal users, the root password is "
-"solicited; this is necessary for the program's operation. The flash drive "
-"can be inserted beforehand or once the program is started. In the latter "
-"case, a dialogue will say that there is no flash drive inserted, and allow a "
-"'retry' to find it once it is. (You may have to close any automatically "
-"opened File Manager window).\n"
-"\n"
-"The fields of the main window are as follows:\n"
-"- Device to work on: the device of the USB flash drive, a drop-down list to "
-"choose from.\n"
-"- Write Image: to choose the source ISO image *.iso (or flash drive backup "
-"file *.img) to write out.\n"
-"- Write to device: This button launches the operation - with a prior warning "
-"dialogue. If a flash drive backup was requested, this is done first. Then "
-"(or only) the image file write. Each operation is shown in the progress bar "
-"beneath.\n"
-"- Backup to: define the name and placement of the backup image file. The "
-"current flash drive will be backed up to a disc file. Note that the entire "
-"flash drive is preserved, regardless of its actual contents; ensure that you "
-"have the necessary free disc space (the same size as the USB device). This "
-"backup file can be used later to restore the flash drive by selecting it as "
-"the source *.img file to write out.\n"
-"- Backup the device: launch the backup operation.\n"
-"- Format the device:  create an unique partition on the entire volume in the "
-"specified format in FAT, NTFS or ext. You can specify a volume name and the "
-"format in a new dialog box.\n"
-"- Details: this button shows detailed log information.\n"
-"\n"
-msgstr ""
-"Mageia IsoDumper\n"
-"----------------\n"
-"See graafiline rakendus on eelkõige mõeldud alglaadimiseks sobiva ISO-"
-"tõmmise turvaliseks kirjutamiseks USB-pulgale, mis käsitsi tehes võib olla "
-"isegi ohtlik tegevus. Lisaks on võimalik teha kogu USB-pulga varasemast "
-"sisust varukoopia kõvakettale ning hiljem taastada pulga algne olek. Samuti "
-"saab USB-seadet vormindada.\n"
-"\n"
-"IsoDumperi võib käivitada kas menüüst või kasutaja või administraatori "
-"õigustes konsoolis käsuga 'isodumper'. Tavalise kasutaja korral nõutakse "
-"administraatori parooli: see on vajalik rakenduse korralikuks töötamiseks. "
-"USB-pulga võib sisestada nii enne kui ka pärast rakenduse käivitamist. "
-"Viimasel juhul teatab dialoog, et USB-pulka pole sisestatud, ja pakutakse "
-"võimalust seda leida, niipea kui pulk on sisestatud. (Võib olla küll vajalik "
-"sulgeda kõik automaatselt avatud failihalduri aknad.)\n"
-"\n"
-"Peaakna väljad on järgmised:\n"
-"- Kasutatav seade: USB-pulk, mille saab valida hüpikmenüüst.\n"
-"- Tõmmise kirjutamine: ISO-tõmmise *.iso (või pulga varukoopiafaili *.img) "
-"valimine, mida hakatakse kirjutama.\n"
-"- Kirjuta seadmele: selle nupuga saab käivitada kirjutamise (eelneb ka "
-"hoiatav teade). Kui sooviti pulgast teha varukoopia, käivitatakse see "
-"operatsioon esimesena. Seejärel kirjutatakse tõmmis. Iga operatsiooni kulgu "
-"näidatakse all asuval edenemisribal.\n"
-"- Varukoopia: siin saab määrata varukoopiafaili nime ja asukoha. Aktiivne "
-"USB-pulk varundatakse kõvakettale. Pange tähele, et varundatakse kogu pulk "
-"sõltumata selle sisust, mistõttu peab kettal olema piisavalt vaba ruumi "
-"(sama palju kui USB-pulgal). Varukoopiafaili abil saab hiljem pulga algse "
-"sisu taastada, kui valida vastav *img-fail tõmmise kirjutamise väljal.\n"
-"- Varunda seade: see käivitab varundamise.\n"
-"- Vorminda seade:  sellega saab luua unikaalse partitsiooni kogu seadme "
-"ulatuses ettemääratud vormingus: FAT, NTFS või ext. Dialoogis saab määrata "
-"seadme nime ja vormingu.\n"
-"- Üksikasjad: sellele klõpsates näeb üksikasjalikku logiteavet.\n"
-"\n"
-
-#: share/isodumper/isodumper.glade.h:43
+#: lib/isodumper.py:639
 msgid "Device to work on:"
 msgstr "Kasutatav seade:"
 
-#: share/isodumper/isodumper.glade.h:44
-msgid "Select target device to write the image to"
-msgstr "Valige sihtseade, kuhu tõmmis kirjutada"
-
-#: share/isodumper/isodumper.glade.h:45
+#: lib/isodumper.py:643
 msgid "Write Image:"
 msgstr "Tõmmise kirjutamine:"
 
-#: share/isodumper/isodumper.glade.h:46
-msgid "Select an image file to be written to the device"
-msgstr "Valige seadmele kirjutatav tõmmis"
+#: lib/isodumper.py:649
+msgid "&Write to device"
+msgstr "Kirjuta seadmele"
 
-#: share/isodumper/isodumper.glade.h:47
-msgid "Select Image"
-msgstr "Vali tõmmis"
+#: lib/isodumper.py:658
+msgid "&Backup the device"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:48
-msgid "For UEFI boot"
-msgstr "UEFI alglaadimiseks"
+#: lib/isodumper.py:662
+msgid "Format the device in FAT, NTFS or ext:"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:49
-msgid "Use FAT32 format with MGALIVE as volume name."
-msgstr "FAT32 vormingu kasutamine MGALIVE-l seadmenimena."
+#: lib/isodumper.py:664
+msgid "&Format the device"
+msgstr "Vorminda seade"
 
-#: share/isodumper/isodumper.glade.h:50
-msgid "&Write to device"
-msgstr "Kirjuta seadmele"
+#: lib/isodumper.py:677 lib/isodumper.py:785
+msgid "&Refresh"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:51
-msgid "Create a backup of the device as image to restore it later"
-msgstr "Seadme varukoopia loomine tõmmisena hilisemaks taastamiseks"
+#: lib/isodumper.py:679
+msgid "&About"
+msgstr ""
+
+#: lib/isodumper.py:681
+msgid "&Help"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:54
-msgid "(None)"
-msgstr "(Puudub)"
+#: lib/isodumper.py:683
+msgid "&Quit"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:55
-msgid "Select a folder in which to write the backup image"
-msgstr "Valige kataloog, kuhu kirjutada varutõmmis"
+#: lib/isodumper.py:689
+msgid "UDisks2 is not available on your system"
+msgstr "UDisks2 ei ole Teie süsteemis saadaval"
 
-#: share/isodumper/isodumper.glade.h:56
-msgid "Backup the device"
-msgstr "Varunda seade"
+#: lib/isodumper.py:708
+msgid "Label for the device:"
+msgstr "Seadme nimi:"
 
-#: share/isodumper/isodumper.glade.h:57
-msgid "Format the device as FAT, NTFS or ext:"
-msgstr "Seadme vormindamine FAT-, NTFS- või ext-vormingus:"
+#: lib/isodumper.py:712
+msgid "FAT 32 (Windows)"
+msgstr "FAT 32 (Windows)"
 
-#: share/isodumper/isodumper.glade.h:58
-msgid "Choose the format. The device will be formatted as one partition"
-msgstr "Valige vorming. Seade vormindatakse ühe partitsioonina"
+#: lib/isodumper.py:714
+msgid "NTFS (Windows)"
+msgstr "NTFS (Windows)"
 
-#: share/isodumper/isodumper.glade.h:59
-msgid "&Format the device"
-msgstr "Vorminda seade"
+#: lib/isodumper.py:716
+msgid "ext4 (Linux)"
+msgstr "ext4 (Linux)"
 
-#: share/isodumper/isodumper.glade.h:60
-msgid "Details"
-msgstr "Üksikasjad"
+#: lib/isodumper.py:718
+msgid "Execute"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:61
-msgid ""
-"<b>Warning</b>\n"
-" No target devices were found. \n"
-"\n"
-" You need to plug in a USB Key\n"
-" to which the image can be written."
+#: lib/isodumper.py:719 lib/isodumper.py:786
+msgid "Cancel"
 msgstr ""
-"<b>Hoiatus</b>\n"
-" Ühtegi sihtseadet ei leitud. \n"
-"\n"
-" Teil tuleb ühendada USB-pulk,\n"
-" millele saab tõmmise kirjutada."
 
-#: share/isodumper/isodumper.glade.h:66
+#: lib/isodumper.py:784
 msgid ""
-"<b>Success</b>\n"
-" The operation completed successfully.\n"
-" \n"
-" You are free to unplug it now, a log isodumper.log \n"
-" of the operation will be saved in your homedir/.isodumper/ when\n"
-" you close the application."
+"Warning<BR />No target devices were found.<BR />You need to plug in a USB "
+"Key to which the image can be written."
 msgstr ""
-"<b>Kordaminek</b> \n"
-" Operatsioon lõppes edukalt..\n"
-" \n"
-"Võite nüüd USB-pulga eemaldada. Operatsiooni logifail\n"
-"isodumper.log salvestatakse kodukataloogi alamkataloogi\n"
-".isodumper pärast rakenduse sulgemist."
+
+#: polkit/org.mageia.isodumper.policy.in.h:1
+msgid "Run Isodumper"
+msgstr "IsoDumperi käivitamine"
+
+#: polkit/org.mageia.isodumper.policy.in.h:2
+msgid "Authentication is required to run Isodumper"
+msgstr "IsoDumperi käivitamine nõuab autentimist"
+
+#: share/applications/isodumper.desktop.in.h:2
+msgid "A GUI tool to write .img and .iso files to USB sticks"
+msgstr "Rakendus .img- ja .iso-failide kirjutamiseks USB-pulgale"
+
+#~ msgid ""
+#~ "<b>Success</b>\n"
+#~ " The operation completed successfully.\n"
+#~ " \n"
+#~ " You are free to unplug it now, a log isodumper.log \n"
+#~ " of the operation will be saved in your homedir/.isodumper/ when\n"
+#~ " you close the application."
+#~ msgstr ""
+#~ "<b>Kordaminek</b> \n"
+#~ " Operatsioon lõppes edukalt..\n"
+#~ " \n"
+#~ "Võite nüüd USB-pulga eemaldada. Operatsiooni logifail\n"
+#~ "isodumper.log salvestatakse kodukataloogi alamkataloogi\n"
+#~ ".isodumper pärast rakenduse sulgemist."
+
+#~ msgid ""
+#~ "<b>Warning</b>\n"
+#~ " No target devices were found. \n"
+#~ "\n"
+#~ " You need to plug in a USB Key\n"
+#~ " to which the image can be written."
+#~ msgstr ""
+#~ "<b>Hoiatus</b>\n"
+#~ " Ühtegi sihtseadet ei leitud. \n"
+#~ "\n"
+#~ " Teil tuleb ühendada USB-pulk,\n"
+#~ " millele saab tõmmise kirjutada."
+
+#~ msgid "Details"
+#~ msgstr "Üksikasjad"
+
+#~ msgid "Choose the format. The device will be formatted as one partition"
+#~ msgstr "Valige vorming. Seade vormindatakse ühe partitsioonina"
+
+#~ msgid "Format the device as FAT, NTFS or ext:"
+#~ msgstr "Seadme vormindamine FAT-, NTFS- või ext-vormingus:"
+
+#~ msgid "Backup the device"
+#~ msgstr "Varunda seade"
+
+#~ msgid "Select a folder in which to write the backup image"
+#~ msgstr "Valige kataloog, kuhu kirjutada varutõmmis"
+
+#~ msgid "(None)"
+#~ msgstr "(Puudub)"
+
+#~ msgid "Create a backup of the device as image to restore it later"
+#~ msgstr "Seadme varukoopia loomine tõmmisena hilisemaks taastamiseks"
+
+#~ msgid "Use FAT32 format with MGALIVE as volume name."
+#~ msgstr "FAT32 vormingu kasutamine MGALIVE-l seadmenimena."
+
+#~ msgid "For UEFI boot"
+#~ msgstr "UEFI alglaadimiseks"
+
+#~ msgid "Select Image"
+#~ msgstr "Vali tõmmis"
+
+#~ msgid "Select an image file to be written to the device"
+#~ msgstr "Valige seadmele kirjutatav tõmmis"
+
+#~ msgid "Select target device to write the image to"
+#~ msgstr "Valige sihtseade, kuhu tõmmis kirjutada"
+
+#~ msgid ""
+#~ "Mageia IsoDumper\n"
+#~ "----------------\n"
+#~ "This GUI program is primarily for safely writing a bootable ISO image to "
+#~ "a USB flash drive, an operation devious & potentially hazardous when done "
+#~ "by hand. As a bonus, it can also back up the entire previous contents of "
+#~ "the flash drive onto the hard disc, and restore the flash drive to its "
+#~ "previous state subsequently. It gives also a feature for formatting the "
+#~ "USB device.\n"
+#~ "\n"
+#~ "IsoDumper can be launched either from the menus, or a user or root "
+#~ "console with the command 'isodumper'. For normal users, the root password "
+#~ "is solicited; this is necessary for the program's operation. The flash "
+#~ "drive can be inserted beforehand or once the program is started. In the "
+#~ "latter case, a dialogue will say that there is no flash drive inserted, "
+#~ "and allow a 'retry' to find it once it is. (You may have to close any "
+#~ "automatically opened File Manager window).\n"
+#~ "\n"
+#~ "The fields of the main window are as follows:\n"
+#~ "- Device to work on: the device of the USB flash drive, a drop-down list "
+#~ "to choose from.\n"
+#~ "- Write Image: to choose the source ISO image *.iso (or flash drive "
+#~ "backup file *.img) to write out.\n"
+#~ "- Write to device: This button launches the operation - with a prior "
+#~ "warning dialogue. If a flash drive backup was requested, this is done "
+#~ "first. Then (or only) the image file write. Each operation is shown in "
+#~ "the progress bar beneath.\n"
+#~ "- Backup to: define the name and placement of the backup image file. The "
+#~ "current flash drive will be backed up to a disc file. Note that the "
+#~ "entire flash drive is preserved, regardless of its actual contents; "
+#~ "ensure that you have the necessary free disc space (the same size as the "
+#~ "USB device). This backup file can be used later to restore the flash "
+#~ "drive by selecting it as the source *.img file to write out.\n"
+#~ "- Backup the device: launch the backup operation.\n"
+#~ "- Format the device:  create an unique partition on the entire volume in "
+#~ "the specified format in FAT, NTFS or ext. You can specify a volume name "
+#~ "and the format in a new dialog box.\n"
+#~ "- Details: this button shows detailed log information.\n"
+#~ "\n"
+#~ msgstr ""
+#~ "Mageia IsoDumper\n"
+#~ "----------------\n"
+#~ "See graafiline rakendus on eelkõige mõeldud alglaadimiseks sobiva ISO-"
+#~ "tõmmise turvaliseks kirjutamiseks USB-pulgale, mis käsitsi tehes võib "
+#~ "olla isegi ohtlik tegevus. Lisaks on võimalik teha kogu USB-pulga "
+#~ "varasemast sisust varukoopia kõvakettale ning hiljem taastada pulga algne "
+#~ "olek. Samuti saab USB-seadet vormindada.\n"
+#~ "\n"
+#~ "IsoDumperi võib käivitada kas menüüst või kasutaja või administraatori "
+#~ "õigustes konsoolis käsuga 'isodumper'. Tavalise kasutaja korral nõutakse "
+#~ "administraatori parooli: see on vajalik rakenduse korralikuks "
+#~ "töötamiseks. USB-pulga võib sisestada nii enne kui ka pärast rakenduse "
+#~ "käivitamist. Viimasel juhul teatab dialoog, et USB-pulka pole sisestatud, "
+#~ "ja pakutakse võimalust seda leida, niipea kui pulk on sisestatud. (Võib "
+#~ "olla küll vajalik sulgeda kõik automaatselt avatud failihalduri aknad.)\n"
+#~ "\n"
+#~ "Peaakna väljad on järgmised:\n"
+#~ "- Kasutatav seade: USB-pulk, mille saab valida hüpikmenüüst.\n"
+#~ "- Tõmmise kirjutamine: ISO-tõmmise *.iso (või pulga varukoopiafaili *."
+#~ "img) valimine, mida hakatakse kirjutama.\n"
+#~ "- Kirjuta seadmele: selle nupuga saab käivitada kirjutamise (eelneb ka "
+#~ "hoiatav teade). Kui sooviti pulgast teha varukoopia, käivitatakse see "
+#~ "operatsioon esimesena. Seejärel kirjutatakse tõmmis. Iga operatsiooni "
+#~ "kulgu näidatakse all asuval edenemisribal.\n"
+#~ "- Varukoopia: siin saab määrata varukoopiafaili nime ja asukoha. Aktiivne "
+#~ "USB-pulk varundatakse kõvakettale. Pange tähele, et varundatakse kogu "
+#~ "pulk sõltumata selle sisust, mistõttu peab kettal olema piisavalt vaba "
+#~ "ruumi (sama palju kui USB-pulgal). Varukoopiafaili abil saab hiljem pulga "
+#~ "algse sisu taastada, kui valida vastav *img-fail tõmmise kirjutamise "
+#~ "väljal.\n"
+#~ "- Varunda seade: see käivitab varundamise.\n"
+#~ "- Vorminda seade:  sellega saab luua unikaalse partitsiooni kogu seadme "
+#~ "ulatuses ettemääratud vormingus: FAT, NTFS või ext. Dialoogis saab "
+#~ "määrata seadme nime ja vormingu.\n"
+#~ "- Üksikasjad: sellele klõpsates näeb üksikasjalikku logiteavet.\n"
+#~ "\n"
+
+#~ msgid "Isodumper - Help"
+#~ msgstr "Isodumper - Abi"
+
+#~ msgid "Only for Linux systems"
+#~ msgstr "Ainult Linuxi süsteemidele."
+
+#~ msgid "To handle files bigger than 4Gb"
+#~ msgstr "Suurematele kui 4 Gb failidele."
+
+#~ msgid "The standard. The size of files are limited to 4Gb"
+#~ msgstr "Standardne. Failide suuruseks on kuni 4 Gb."
+
+#~ msgid ""
+#~ "<b>Error</b>\n"
+#~ " Something went wrong, please see the details\n"
+#~ " window for the exact error.\n"
+#~ "\n"
+#~ " The application will be closed with this window, and a logfile\n"
+#~ " isodumper.log  will be saved in your homedir/.isodumper "
+#~ msgstr ""
+#~ "<b>Tõrge</b>\n"
+#~ " Midagi läks valesti. Palun vaadake üksikasju \n"
+#~ " täpse veateate aknast.\n"
+#~ " \n"
+#~ "Rakendus suletakse ning logifail \n"
+#~ "isodumper.log salvestatakse kodukataloogi \n"
+#~ "alamkataloogis .isodumper."
+
+#~ msgid ""
+#~ "<b>Warning</b>\n"
+#~ " This will <b>destroy all data</b> on the target\n"
+#~ " device, are you sure you want to proceed ?\n"
+#~ "\n"
+#~ " If you say ok here, please <b>do not unplug</b>\n"
+#~ " the device during the following operation."
+#~ msgstr ""
+#~ "<b>Hoiatus</b>\n"
+#~ " See <b>hävitab kõik andmed</b> sihtseadmes,\n"
+#~ " kas tõesti jätkata?\n"
+#~ "\n"
+#~ " Kui olete kindel, palun <b>ärge lahutage</b>\n"
+#~ " seadet selle operatsiooni jooksul."
+
+#~ msgid "Select"
+#~ msgstr "Vali"
+
+#~ msgid ""
+#~ "A tool for writing ISO images on a USB stick. It's a fork of usb-"
+#~ "imagewriter."
+#~ msgstr ""
+#~ "Tööriist ISO-tõmmiste kirjutamiseks USB-pulgale. See on programmi usb-"
+#~ "imagewriter edasiarendus."
+
+#~ msgid ""
+#~ "Writing is in progress. Exiting during writing will make the device or "
+#~ "the backup unusable.\n"
+#~ "Are you sure you want to quit during writing?"
+#~ msgstr ""
+#~ "Kirjutamine käib. Väljumise korral kirjutamise ajal võib seade või "
+#~ "varukoopia muutuda kasutamiskõlbmatuks.\n"
+#~ "Kas tõesti väljuda kirjutamise ajal?"
+
+#~ msgid "%s file(s) to copy."
+#~ msgstr "%s fail(i) kopeerida."
+
+#~ msgid "ISO image mounted in "
+#~ msgstr "ISO-tõmmis on haagitud kataloogis "
+
+#~ msgid "Error copying files"
+#~ msgstr "Tõrge failide kopeerimisel"
+
+#~ msgid "Mounted in: "
+#~ msgstr "Haakimise asukoht: "
+
+#~ msgid "Error mounting the partition %s"
+#~ msgstr "Tõrge partitsiooni %s haakimisel"