# SOME DESCRIPTIVE TITLE # Copyright (C) YEAR Mageia # This file is distributed under the same license as the Mageia Installer Help package. # # Translators: # Kristoffer Grundström , 2013 # Kristoffer Grundström , 2013 # Kristoffer Grundström , 2013,2019 # Kristoffer Grundström , 2013-2016,2018 # Kristoffer Grundström , 2021 # Michael Eklund , 2014-2017,2019 # Yuri Chornoivan , 2016 msgid "" msgstr "" "Project-Id-Version: Mageia\n" "Report-Msgid-Bugs-To: doc-discuss@ml.mageia.org\n" "POT-Creation-Date: 2023-05-08 17:18+0300\n" "PO-Revision-Date: 2021-11-08 23:46+0000\n" "Last-Translator: Kristoffer Grundström \n" "Language-Team: Swedish (http://www.transifex.com/MageiaLinux/mageia/language/" "sv/)\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #. type: Content of:
#: en/acceptLicense.xml:31 msgid "License and Release Notes" msgstr "Anteckningar för licens och utgåvan" #. type: Content of: <section><mediaobject> #: en/acceptLicense.xml:35 msgid "" "<imageobject condition=\"classical\"> <imagedata format=\"PNG\" xml:id=" "\"acceptLicense-im1\" fileref=\"dx2-license.png\" align=\"center\" revision=" "\"4\"/> </imageobject> <imageobject> <imagedata format=\"PNG\" fileref=" "\"live-license.png\" xml:id=\"acceptLicense-im2\" revision=\"5\" align=" "\"center\" condition=\"live\"/> </imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata format=\"PNG\" xml:id=" "\"acceptLicense-im1\" fileref=\"dx2-license.png\" align=\"center\" revision=" "\"4\"/> </imageobject> <imageobject> <imagedata format=\"PNG\" fileref=" "\"live-license.png\" xml:id=\"acceptLicense-im2\" revision=\"5\" align=" "\"center\" condition=\"live\"/> </imageobject>" #. type: Content of: <section><section><info><title> #: en/acceptLicense.xml:46 msgid "License Agreement" msgstr "Licensavtal" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/acceptLicense.xml:51 msgid "" "Before installing Mageia, please read the license terms and conditions " "carefully." msgstr "Läs igenom licensvillkoren ordentligt innan du installerar Mageia." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/acceptLicense.xml:56 msgid "" "These terms and conditions apply to the entire Mageia distribution and must " "be accepted before you can continue." msgstr "" "Villkoren gäller hela Mageias distribution, och måste accepteras innan du " "kan fortsätta." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/acceptLicense.xml:61 msgid "" "To proceed, simply select <emphasis>Accept</emphasis> and then click on " "<emphasis>Next</emphasis>" msgstr "" "Vänligen välj <emphasis>Acceptera</emphasis> och klicka sedan på " "<emphasis>Nästa</emphasis> för att fortsätta" #. type: Content of: <section><section><para> #: en/acceptLicense.xml:66 msgid "" "If you decide not to accept these conditions, then we thank you for your " "interest in Mageia. Clicking <emphasis>Quit</emphasis> will reboot your " "computer." msgstr "" "Om du beslutar dig för att inte acceptera de här villkoren så tackar vi dig " "för ditt intresse för Mageia. Att klicka på <emphasis>Avsluta</emphasis> " "kommer att starta om din dator." #. type: Content of: <section><section><info><title> #: en/acceptLicense.xml:76 msgid "Release Notes" msgstr "Versionsinformation" #. type: Content of: <section><section><para> #: en/acceptLicense.xml:83 msgid "" "Important information about this particular Mageia release can be viewed by " "clicking on the <emphasis>Release Notes</emphasis> button." msgstr "" #. type: Content of: <section><info><title> #: en/add_supplemental_media.xml:3 msgid "Supplemental Installation Media" msgstr "Kompletterande installationsmedia" #. papoteur 2013-04-13 - created #. marja 2013-04-16 added screenshot and expanded title (because is was the same as for media_selection #. marja 2013-04-16 s/a optical/an optcal/ s/support/disc/ s/or or/or/ s/at/during/ as suggested by Tristan Campbell #. 2018/02/10 apb: Text and typgraphy. #. 2018/02/16 apb: Update dx2-add_supplemental_media.png to Mga6 #. type: Content of: <section><mediaobject> #: en/add_supplemental_media.xml:18 msgid "" "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-add_supplemental_media." "png\" xml:id=\"dx2-add_supplemental_media-im1\" align=\"center\" revision=" "\"1\"/> </imageobject>" msgstr "" "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-add_supplemental_media." "png\" xml:id=\"dx2-add_supplemental_media-im1\" align=\"center\" revision=" "\"1\"/> </imageobject>" #. type: Content of: <section><para> #: en/add_supplemental_media.xml:23 msgid "" "This screen shows you the list of already recognised repositories. You can " "add other sources for packages, like an optical-disc or a remote source. " "The source selection determines which packages will be available during the " "subsequent steps." msgstr "" #. type: Content of: <section><para> #: en/add_supplemental_media.xml:28 msgid "For a network source, there are two steps to follow:" msgstr "För en nätverkskälla så finns det två steg att följa:" #. type: Content of: <section><orderedlist><listitem><para> #: en/add_supplemental_media.xml:32 msgid "Choosing and activating the network, if not already up." msgstr "Väljer och aktiverar nätverket om det inte redan är uppe." #. type: Content of: <section><orderedlist><listitem><para> #: en/add_supplemental_media.xml:36 msgid "" "Selecting a mirror or specifying a URL (very first entry). By selecting a " "mirror, you have access to the selection of all repositories managed by " "Mageia, like the <emphasis>Nonfree</emphasis>, the <emphasis>Tainted</" "emphasis> repositories and the <emphasis>Updates</emphasis>. With the URL, " "you can designate a specific repository or your own NFS installation." msgstr "" #. type: Content of: <section><note><para> #: en/add_supplemental_media.xml:46 msgid "" "If you are updating a 64-bit installation which may contain some 32-bit " "packages, it is advised to use this screen to add an online mirror by " "selecting one of the Network protocols here. The 64-bit DVD ISO only " "contains 64-bit and <emphasis>noarch</emphasis> packages, it will not be " "able to update the 32-bit packages. However, after adding an online mirror, " "the installer will find the needed 32-bit packages there." msgstr "" #. type: Content of: <section><info><title> #: en/addUser.xml:9 msgid "User Management" msgstr "Användarhantering" #. Lebarhon: 20170210 updated for Mageia 6 (umask) #. 2018/02/12 apb: Text and Typography. #. 2018/02/19 apb: Update dx2-setRootPassword.png to Mga6. #. 2018/02/21 apb: Changed title from 'User and Superuser Management' to 'User Management'. Docteam approved (plus, the SC title is User Management). #. Also changed 'Advanced User Management' to 'User Management (advanced)'. #. 2018/02/24 apb: Changed list style. #. 2019/08/10 apb: Added missing 'condition' profile for live-user1.png. #. 2019/08/11 apb: [1] Reword 1.1 (including Note) [2] Reword 1.2 Password text. #. type: Content of: <section><mediaobject> #: en/addUser.xml:28 msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-setRootPassword.png\" format=\"PNG\" revision=\"1\" xml:id=" "\"setRootPassword-im1\"/> </imageobject> <imageobject condition=\"live\"> " "<imagedata fileref=\"live-user1.png\" format=\"PNG\"/> </imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-setRootPassword.png\" format=\"PNG\" revision=\"1\" xml:id=" "\"setRootPassword-im1\"/> </imageobject> <imageobject condition=\"live\"> " "<imagedata fileref=\"live-user1.png\" format=\"PNG\"/> </imageobject>" #. type: Content of: <section><section><info><title> #: en/addUser.xml:40 msgid "Set Administrator (root) Password:" msgstr "Ställ in ett administratörs (root) -lösenord:" #. type: Content of: <section><section><para> #: en/addUser.xml:44 msgid "" "It is advisable for all Mageia installations to set a <literal>superuser</" "literal> (Administrator) password, usually called the <emphasis>root </" "emphasis>password in Linux. You need to repeat the same password in the box " "underneath, to check that the first entry was not mistyped." msgstr "" #. type: Content of: <section><section><note><para> #: en/addUser.xml:51 msgid "" "As you type a password into the top box a shield will change from red-to-" "yellow-to-green depending on the strength of the password. A green shield " "shows you are using a strong password." msgstr "" #. type: Content of: <section><section><note><para> #: en/addUser.xml:55 msgid "" "All passwords are case-sensitive. It is best to use a mixture of letters " "(upper and lower case), numbers and other characters in a password." msgstr "" #. type: Content of: <section><section><info><title> #: en/addUser.xml:63 msgid "Enter a user" msgstr "Lägg till en användare" #. type: Content of: <section><section><para> #: en/addUser.xml:66 msgid "" "Add a User here. A regular user has fewer privileges than the " "<literal>superuser</literal> (root), but enough to use the Internet, office " "applications or play games and anything else the average user might use a " "computer for." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:73 msgid "<emphasis role=\"bold\">Icon</emphasis>" msgstr "<emphasis role=\"bold\">Ikon</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:75 msgid "Click on this button if you want to change the user's icon" msgstr "Klicka på den här knappen om du vill ändra på användarens ikon" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:80 msgid "<emphasis role=\"bold\">Real Name</emphasis>" msgstr "<emphasis role=\"bold\">Fullständigt namn</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:82 msgid "Insert the user's real name into this text box" msgstr "Klistra in användarens riktiga namn i den här textrutan" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:86 msgid "<emphasis role=\"bold\">Login Name</emphasis>" msgstr "<emphasis role=\"bold\">Inloggningsnamn</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:88 msgid "" "Enter the user login name or let DrakX use a version of the user's real " "name. <emphasis role=\"bold\">The login name is case-sensitive.</emphasis>" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><caution><simpara> #: en/addUser.xml:93 msgid "" "The login entered here should be different to any login currently in use for " "your <filename>/home</filename> directory. Some user parameters will be " "written in the user space, and some can overwrite actual data such as " "Firefox, Thunderbird or Kmail data..." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/addUser.xml:102 en/setupBootloader.xml:135 msgid "<emphasis role=\"bold\">Password</emphasis>" msgstr "<emphasis role=\"bold\">Lösenord</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:104 msgid "Type in the user password (remembering the advice in the Note above)." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:107 msgid "" "<emphasis role=\"bold\">Password (again):</emphasis> Retype the user " "password. DrakX will check that you have not mistyped the password." msgstr "" #. type: Content of: <section><section><note><para> #: en/addUser.xml:114 msgid "" "Any users added while installing Mageia, will have a home directory that is " "both read and write protected (umask=0027)" msgstr "" #. type: Content of: <section><section><note><para> #: en/addUser.xml:117 msgid "" "You can add any extra needed users in the <emphasis>Configuration - Summary</" "emphasis> step during the install. Choose <emphasis>User management</" "emphasis>." msgstr "" #. type: Content of: <section><section><note><para> #: en/addUser.xml:121 msgid "The access permissions can also be changed after the install." msgstr "Rättigheterna för åtkomst kan också ändras efter installationen." #. type: Content of: <section><section><info><title> #: en/addUser.xml:128 msgid "User Management (advanced)" msgstr "Användarhantering (avancerad)" #. type: Content of: <section><section><para> #: en/addUser.xml:131 msgid "" "The <emphasis>Advanced</emphasis> option allows you to edit further settings " "for the user you are adding." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:136 msgid "" "<emphasis>Shell</emphasis>: This drop-down list allows you to change the " "shell available to any user you added in the previous screen. Options are " "<literal>Bash</literal>, <literal>Dash</literal> and <literal>Sh</literal>" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:143 msgid "" "<emphasis>User ID</emphasis>: Here you can set the user ID for any user you " "added in the previous screen. If you are unsure what the purpose of this is, " "then leave it blank." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:149 msgid "" "<emphasis>Group ID</emphasis>: This lets you set the group ID. Again, if " "unsure, leave it blank." msgstr "" #. type: Content of: <section><info><title> #: en/ask_mntpoint_s.xml:10 msgid "Choose the mount points" msgstr "Välj monteringspunkter" #. Made by marja on 2012 03 28 #. NEEDS TO BE REVIEWED! #. SimonNZG 2012-04-03 has taken a look but needs to come back #. removed para xml:id's, marja, 20120409 #. barjac 14/04/2012 Minor edit to improve grammar and replaced "at least ONE" #. with "a", as I can't imagine having more than one root partition ;) #. Lebarhon : I put [] where it seems having mistakes #. Marja: you're right, in English English it is "its type", however, the Americans #. write "it's type". And you're right about the redundant part, too, I removed it #. And JohnR says the Americans are WRONG! :-)) #. 2012-04-19 Language proofreading done #. 2018/02/12 apb: Text and typography. #. 2019/01/04 apb: Typo & minor reword on custom mount-points. #. type: Content of: <section><mediaobject> #: en/ask_mntpoint_s.xml:38 msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-chooseMountpoints.png\" format=\"PNG\" revision=\"1\" xml:id=" "\"chooseMountPoints-im1\"/> </imageobject> <imageobject condition=\"live\"> " "<imagedata align=\"center\" fileref=\"live-chooseMountpoints.png\" format=" "\"PNG\" revision=\"1\" xml:id=\"live-chooseMountPoints-im1\"/> </imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-chooseMountpoints.png\" format=\"PNG\" revision=\"1\" xml:id=" "\"chooseMountPoints-im1\"/> </imageobject> <imageobject condition=\"live\"> " "<imagedata align=\"center\" fileref=\"live-chooseMountpoints.png\" format=" "\"PNG\" revision=\"1\" xml:id=\"live-chooseMountPoints-im1\"/> </imageobject>" #. type: Content of: <section><para> #: en/ask_mntpoint_s.xml:49 msgid "" "Here you see the Linux partitions that have been found on your computer. If " "you don't agree with the DrakX suggestions, you can change the mount points " "yourself." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/ask_mntpoint_s.xml:55 msgid "" "To the left of the drop-down menus is a list of available partitions. For " "example: <filename>sda</filename> is a hard drive - and <filename>5</" "filename> is a <emphasis>partition number</emphasis>, followed by " "the<emphasis> (capacity, mount point, filesystem type)</emphasis> of the " "partition." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/ask_mntpoint_s.xml:63 msgid "" "If you have several partitions, you can choose various different " "<emphasis>mount points</emphasis> from the drop down menu, such as " "<filename>/</filename>, <filename>/home</filename> and <filename>/var</" "filename>. You can even make your own mount points, for instance <filename>/" "video</filename> for a partition where you want to store your films, or " "perhaps <filename>/Data</filename> for all your data files." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/ask_mntpoint_s.xml:73 msgid "" "For any partitions that you don't need to make use of, you can leave the " "mount point field blank." msgstr "" #. type: Content of: <section><warning><para> #: en/ask_mntpoint_s.xml:79 msgid "" "If you make any changes here, ensure you still have a <filename>/</filename> " "(root) partition." msgstr "" "Om du gör några ändringar här, försäkra dig om att du fortfarande har en " "<filename>/</filename> (root)-partition." #. type: Content of: <section><tip><para> #: en/ask_mntpoint_s.xml:84 msgid "" "If you are not sure what to choose, click <emphasis>Previous</emphasis> to " "go back and then tick <emphasis>Custom disk partitioning</emphasis>, where " "you can click on a partition to see its type and size." msgstr "" #. type: Content of: <section><para> #: en/ask_mntpoint_s.xml:90 msgid "" "If you are sure the mount points are correct, click on <emphasis>Next</" "emphasis>, and choose whether you only want to format the partition " "suggested by DrakX, or more." msgstr "" #. type: Content of: <section><info><title> #: en/bestTime.xml:5 msgid "Clock Settings" msgstr "Inställningar för klocka" #. type: Content of: <section><mediaobject> #: en/bestTime.xml:8 msgid "" "<imageobject> <imagedata format=\"PNG\" align=\"center\" fileref=\"live-" "bestTime.png\" revision=\"1\" xml:id=\"bestTime-im1\"/> </imageobject>" msgstr "" "<imageobject> <imagedata format=\"PNG\" align=\"center\" fileref=\"live-" "bestTime.png\" revision=\"1\" xml:id=\"bestTime-im1\"/> </imageobject>" #. type: Content of: <section><para> #: en/bestTime.xml:12 msgid "" "Here, you can select whether your computer internal clock is set to local " "time or UTC time." msgstr "" "Här kan du välja om din dators interna klocka är inställd på lokal tid eller " "UTC-tid." #. type: Content of: <section><para> #: en/bestTime.xml:14 msgid "" "In the <emphasis>Advanced</emphasis> tab, you can enable automatic time " "synchronization and specify an NTP server." msgstr "" #. type: Content of: <section><info><title> #: en/bootLive.xml:10 msgid "Boot Mageia as Live system" msgstr "Starta Mageia som ett Live-system" #. type: Content of: <section><section><info><title> #: en/bootLive.xml:14 msgid "Booting the medium" msgstr "Startar upp mediat" #. type: Content of: <section><section><para> #: en/bootLive.xml:16 msgid "" "You can boot directly from a Live DVD or USB. Usually, you just need to plug " "the USB device in or place the DVD in the drive and restart the computer." msgstr "" #. type: Content of: <section><section><para> #: en/bootLive.xml:19 msgid "" "If the computer does not automatically boot from the USB or DVD you may need " "to reconfigure your BIOS Boot Disk priority. Alternatively, you might try " "accessing the boot device menu to select a device from which the computer " "will boot." msgstr "" #. type: Content of: <section><section><tip><para> #: en/bootLive.xml:24 msgid "" "To access the BIOS or boot menu when the computer is starting, you can try " "pressing either <keycap>F2</keycap>, <keycap>Del</keycap> or <keycap>Esc</" "keycap> for the BIOS, or <keycap>Esc</keycap>, <keycap>F8</keycap>, " "<keycap>F10</keycap> or <keycap>F11</keycap> for the boot device menu. These " "(fairly common) keys are just a selection of possible options though." msgstr "" "För att komma åt BIOS eller uppstartsmenyn när datorn startar så kan du " "trycka antingen <keycap>F2</keycap>, <keycap>Del</keycap> eller <keycap>Esc</" "keycap> för BIOS, eller <keycap>Esc</keycap>, <keycap>F8</keycap>, " "<keycap>F10</keycap> eller <keycap>F11</keycap> för enhetens uppstartsmeny. " "Dessa (vanligt förekommande) tangenter är dock bara ett urval av möjliga " "alternativ." #. type: Content of: <section><section><note><para> #: en/bootLive.xml:32 msgid "" "The actual screen that you will first see when booting from the Live media " "will depend on whether your computer motherboard is of the Legacy (BIOS) or " "UEFI type." msgstr "" #. type: Content of: <section><section><info><title> #: en/bootLive.xml:39 msgid "In BIOS/CSM/Legacy mode" msgstr "I BIOS/CSM/Legacy-läge" #. type: Content of: <section><section><mediaobject> #: en/bootLive.xml:42 msgid "" "<imageobject> <imagedata fileref=\"../live-bootCSM.png\" align=\"center\"/> " "</imageobject>" msgstr "" "<imageobject> <imagedata fileref=\"../live-bootCSM.png\" align=\"center\"/> " "</imageobject>" #. type: Content of: <section><section><mediaobject><caption><para> #: en/bootLive.xml:46 msgid "First screen while booting in BIOS mode" msgstr "Den första skärmen när du startar i BIOS-läge" #. type: Content of: <section><section><section><itemizedlist><title> #: en/bootLive.xml:50 en/bootLive.xml:104 en/installer.xml:108 #: en/installer.xml:156 msgid "Menu" msgstr "Meny" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:52 en/bootLive.xml:106 msgid "<emphasis role=\"bold\">Boot Mageia</emphasis>" msgstr "<emphasis role=\"bold\">Starta Mageia</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:53 msgid "" "This option will boot the Mageia Live system from the connected DVD/USB " "media (expect a very slow system compared to an installed OS)." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:56 msgid "Once the boot is done, you can proceed to the installation." msgstr "När uppstarten är gjord så kan du fortsätta med installationen." #. type: Content of: <section><section><itemizedlist><listitem><itemizedlist><listitem><para> #: en/bootLive.xml:60 en/bootLive.xml:72 msgid "" "<emphasis role=\"bold\">+ use non-free video drivers (slower to boot)</" "emphasis>" msgstr "" "<emphasis role=\"bold\">+ använd icke-fria grafik-drivrutiner (startar " "långsammare)</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><itemizedlist><listitem><para> #: en/bootLive.xml:62 msgid "Boot the Mageia Live system using non-free video drivers" msgstr "Starta Mageia Live-systemet med icke-fria grafik-drivrutiner" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/bootLive.xml:68 en/bootLive.xml:112 en/installer.xml:111 msgid "<emphasis role=\"bold\">Install Mageia</emphasis>" msgstr "<emphasis role=\"bold\">Installera Mageia</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:69 en/bootLive.xml:113 msgid "This option will install Mageia to a hard disk." msgstr "Det här alternativet kommer att installera Mageia till en hårddisk." #. type: Content of: <section><section><itemizedlist><listitem><itemizedlist><listitem><para> #: en/bootLive.xml:74 msgid "Install Mageia using non-free video drivers" msgstr "Installera Mageia med icke-fria grafik-drivrutiner" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/bootLive.xml:79 en/installer.xml:127 msgid "<emphasis role=\"bold\">Memory Test</emphasis>" msgstr "<emphasis role=\"bold\">Minnestest</emphasis>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/bootLive.xml:80 en/installer.xml:129 msgid "" "Test the installed RAM by performing multiple read and write operations. " "Reboot to end the test." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:84 en/bootLive.xml:116 msgid "<emphasis role=\"bold\"> F2 Language</emphasis>" msgstr "<emphasis role=\"bold\"> F2 Språk</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:85 en/bootLive.xml:117 msgid "" "Press <keycap>F2</keycap> to have the installer use a specific language " "during the installation. Use the arrow keys to select the language then " "press <keycap>Enter</keycap>." msgstr "" #. type: Content of: <section><section><info><title> #: en/bootLive.xml:93 msgid "In UEFI mode" msgstr "I UEFI-läge" #. type: Content of: <section><section><mediaobject> #: en/bootLive.xml:96 msgid "" "<imageobject> <imagedata format=\"PNG\" fileref=\"../live-bootUEFI.png\" " "align=\"center\" xml:id=\"bootUEFI-im1\" revision=\"1\"/> </imageobject>" msgstr "" "<imageobject> <imagedata format=\"PNG\" fileref=\"../live-bootUEFI.png\" " "align=\"center\" xml:id=\"bootUEFI-im1\" revision=\"1\"/> </imageobject>" #. type: Content of: <section><section><mediaobject><caption><para> #: en/bootLive.xml:100 msgid "First screen while booting in UEFI mode" msgstr "Första skärmen när du startar upp i UEFI-läge" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:107 msgid "" "This option will boot the Mageia Live system from the connected DVD/USB " "media (expect a very slow system compared to an installed OS). Once the " "boot is done, you can proceed to the installation" msgstr "" #. type: Content of: <section><section><note><para> #: en/bootLive.xml:123 msgid "" "If you booted from a USB stick, you will see the above menu options " "duplicated, and in this case, you should choose from the menu pair that will " "be suffixed with \"USB\"." msgstr "" #. type: Content of: <section><info><title> #: en/chooseDesktop.xml:16 msgid "Desktop Selection" msgstr "Val av skrivbordsmiljö" #. type: Content of: <section><para> #: en/chooseDesktop.xml:23 msgid "Some choices made here will open other screens with related options." msgstr "" #. type: Content of: <section><para> #: en/chooseDesktop.xml:26 msgid "" "After the selection step(s), you will see a slideshow during the " "installation of required packages. The slideshow can be disabled by pressing " "the <emphasis>Details</emphasis> button." msgstr "" #. type: Content of: <section><mediaobject> #: en/chooseDesktop.xml:31 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-chooseDesktop.png\" " "format=\"PNG\"/> </imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-chooseDesktop.png\" " "format=\"PNG\"/> </imageobject>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/chooseDesktop.xml:38 msgid "" "Choose whether you prefer to use the KDE Plasma or GNOME desktop " "environment. Both come with a full set of useful applications and tools." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/chooseDesktop.xml:44 msgid "" "Select <emphasis>Custom</emphasis> if you do not wish to use either (or, " "actually use both) of these, or if you want to modify the default software " "choices for these desktop environments. The LXDE desktop, for instance, is " "lighter than the previous two, sporting less eye candy and having fewer " "packages installed by default." msgstr "" #. type: Attribute 'xreflabel' of: <section> #: en/choosePackageGroups.xml:1 #, fuzzy msgid "Choose Package Groups" msgstr "Välj individuella paket" #. type: Content of: <section><info><title> #: en/choosePackageGroups.xml:3 msgid "Package Group Selection" msgstr "Val av paketgrupp" #. Lebarhon 20170209 Updated SC #. 2018/02/25 apb: add xreflabel to this section. #. type: Content of: <section><mediaobject> #: en/choosePackageGroups.xml:11 msgid "" "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-choosePackageGroups.png" "\" align=\"center\"/> </imageobject>" msgstr "" "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-choosePackageGroups.png" "\" align=\"center\"/> </imageobject>" #. type: Content of: <section><para> #: en/choosePackageGroups.xml:16 msgid "" "Packages are arranged into common groups, to make choosing what you need on " "your system a lot easier. The groups are fairly self explanatory, however " "more information about the content of each is available in tool-tips which " "become visible as the mouse is hovered over them." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:23 msgid "<emphasis role=\"bold\">Workstation</emphasis>" msgstr "<emphasis role=\"bold\">Arbetsstation</emphasis>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:27 msgid "<emphasis role=\"bold\">Server</emphasis>" msgstr "<emphasis role=\"bold\">Server</emphasis>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:31 msgid "<emphasis role=\"bold\">Graphical Environment</emphasis>" msgstr "<emphasis role=\"bold\">Grafisk miljö</emphasis>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:35 msgid "" "<emphasis role=\"bold\">Individual Package Selection</emphasis>: you can use " "this option to manually add or remove packages" msgstr "" #. type: Content of: <section><para> #: en/choosePackageGroups.xml:40 msgid "" "See <xref linkend=\"minimal-install\"/> for instructions on how to do a " "minimal install (without or with X & IceWM)." msgstr "" "Läs <xref linkend=\"minimal-install\"/> för instruktioner om hur man gör en " "minimal installation (utan eller med X & IceWM)." #. type: Attribute 'xreflabel' of: <section> #: en/choosePackagesTree.xml:1 #, fuzzy msgid "Choose Packages Tree" msgstr "Välj individuella paket" #. type: Content of: <section><info><title> #: en/choosePackagesTree.xml:3 msgid "Choose Individual Packages" msgstr "Välj individuella paket" #. 2012-12-26 marja - exported this section from choosePackages.xml to start a new page #. 2018/02/15 apb: Text and typography. #. 2018/02/25 apb: add xreflabel to this section. #. type: Content of: <section><mediaobject> #: en/choosePackagesTree.xml:13 msgid "" "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-choosePackagesTree.png" "\" align=\"center\"/> </imageobject>" msgstr "" "<imageobject><imagedata format=\"PNG\" fileref=\"dx2-choosePackagesTree.png" "\" align=\"center\"/></imageobject>" #. type: Content of: <section><para> #: en/choosePackagesTree.xml:18 msgid "" "Here you can add or remove any extra packages to customize your installation." msgstr "" "Här kan du lägga till eller ta bort alla extra-paket för att anpassa din " "installation." #. type: Content of: <section><para> #: en/choosePackagesTree.xml:21 msgid "" "After having made your choice, you can click on the <emphasis>floppy</" "emphasis> icon at the bottom of the page to save your choice of packages " "(saving to a USB key works, too). You can then use this file to install the " "same packages on another system, by pressing the same button during install " "and choosing to load it." msgstr "" #. type: Attribute 'xreflabel' of: <section> #: en/configureServices.xml:1 #, fuzzy msgid "Configure Services" msgstr "Konfigurera dina tjänster" #. type: Content of: <section><info><title> #: en/configureServices.xml:3 msgid "Configure your Services" msgstr "Konfigurera dina tjänster" #. 2012-12-25 marja - moved this section out of misc-params.xml #. 2013-05-05 marja - added screenshot #. 2018/02/16 apb: Minor text adjustment. #. 2018/02/25 apb: a) add xreflabel for this section. b) Added some bullets to the text. #. type: Content of: <section><mediaobject> #: en/configureServices.xml:15 msgid "" "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-configureServices.png" "\" xml:id=\"configureServices-im1\" align=\"center\" revision=\"1\"/> </" "imageobject>" msgstr "" "<imageobject><imagedata format=\"PNG\" fileref=\"dx2-configureServices.png\" " "xml:id=\"configureServices-im1\" align=\"center\" revision=\"1\"/></" "imageobject>" #. type: Content of: <section><para> #: en/configureServices.xml:20 msgid "" "Here you can choose which services should start when you boot your system." msgstr "" "Här kan du välja vilka tjänster som ska startas när du startar upp ditt " "system." #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureServices.xml:25 msgid "" "Click on a triangle to expand a group to all the relevant services. The " "settings DrakX chose are usually good." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureServices.xml:31 msgid "" "If you highlight a service, some information about it is shown in the info " "box below." msgstr "Om du markerar en tjänst så visas viss information i inforutan nedan." #. type: Content of: <section><para> #: en/configureServices.xml:37 msgid "Only change things when you know very well what you are doing." msgstr "Ändra bara på saker när du vet mycket väl vad du gör." #. type: Attribute 'xreflabel' of: <section> #: en/configureTimezoneUTC.xml:1 #, fuzzy msgid "Configure Timezone" msgstr "Ställ in din tidszon" #. type: Content of: <section><info><title> #: en/configureTimezoneUTC.xml:3 msgid "Configure your Timezone" msgstr "Ställ in din tidszon" #. 2012-12-25 marja - moved this part out of misc-params.xml #. 2013-05-05 marja - added screenshot #. 2018/02/13 apb: Minor text adjustment. #. 2018/02/25 apb: Added xreflabel to this section. #. type: Content of: <section><mediaobject> #: en/configureTimezoneUTC.xml:15 msgid "" "<imageobject condition=\"classical\"> <imagedata format=\"PNG\" xml:id=" "\"configureTimezoneUTC-im1\" align=\"center\" fileref=\"dx2-" "configureTimezoneUTC.png\" revision=\"1\"/> </imageobject> <imageobject " "condition=\"live\"> <imagedata format=\"png\" fileref=\"live-timeZone.png\" " "align=\"center\"/> </imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata format=\"PNG\" xml:id=" "\"configureTimezoneUTC-im1\" align=\"center\" fileref=\"dx2-" "configureTimezoneUTC.png\" revision=\"1\"/> </imageobject> <imageobject " "condition=\"live\"> <imagedata format=\"png\" fileref=\"live-timeZone.png\" " "align=\"center\"/> </imageobject>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureTimezoneUTC.xml:26 msgid "" "Choose your timezone by choosing your country, or a city close to you in the " "same timezone." msgstr "" "Välj din tidszon genom att välja ditt land eller en stad nära dig i samma " "tidszon." #. type: Content of: <section><para> #: en/configureTimezoneUTC.xml:32 msgid "" "In the next screen you can choose to set your hardware clock to local time " "or to GMT, also known as UTC." msgstr "" "På nästa skärm så kan du välja att ställa in din hårdvaruklocka till lokal " "tid eller till GMT, också känd som UTC." #. type: Content of: <section><note><para> #: en/configureTimezoneUTC.xml:37 msgid "" "If you have more than one operating system on your computer, make sure they " "are all set to local time, or all to UTC/GMT." msgstr "" "Om du har mer än ett operativsystem i din dator så se till att de är " "inställda på lokal tid eller till UTC/GMT." #. type: Content of: <section><info><title> #: en/configureX_card_list.xml:3 en/configureX_card_list.xml:27 msgid "Choose an X Server (Configure your Graphic Card)" msgstr "Välj en X-server (konfigurera ditt grafikkort)" #. type: Content of: <section><mediaobject> #: en/configureX_card_list.xml:32 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_card_list." "png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_card_list-im1\"/> </" "imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_card_list." "png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_card_list-im1\"/> </" "imageobject>" #. type: Content of: <section><para> #: en/configureX_card_list.xml:38 msgid "" "DrakX has a very comprehensive database of video cards and will usually " "correctly identify your video device." msgstr "" "DrakX har en väldigt omfattande databas av grafikkort och identifierar " "oftast ditt nuvarande grafikkort korrekt." #. type: Content of: <section><para> #: en/configureX_card_list.xml:41 msgid "" "If the installer has not correctly detected your graphic card and you know " "which one you have, you can select it from the tree by:" msgstr "" "Om installationen inte har upptäckt ditt grafikkort korrekt och du vet " "vilket du har så kan du välja det från trädet genom:" #. type: Content of: <section><variablelist><varlistentry><term> #: en/configureX_card_list.xml:44 en/configureX_monitor.xml:78 msgid "Vendor" msgstr "Tillverkare" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/configureX_card_list.xml:48 msgid "then the make of your card" msgstr "sedan kortets tillverkare" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/configureX_card_list.xml:52 msgid "and the model of card" msgstr "och kortets modell" #. type: Content of: <section><para> #: en/configureX_card_list.xml:56 msgid "" "If you cannot find your card in the vendor lists (because it's not yet in " "the database or it's an older card) you may find a suitable driver in the " "<emphasis>Xorg</emphasis> category, which provides more than 40 generic and " "open source video card drivers. If you still can't find a specific driver " "for your card there is the option of using the VESA driver which provides " "basic capabilities." msgstr "" #. type: Content of: <section><caution><para> #: en/configureX_card_list.xml:64 msgid "" "Be aware that if you select an incompatible driver you may only have access " "to the <emphasis>Command Line Interface</emphasis>" msgstr "" #. type: Content of: <section><para> #: en/configureX_card_list.xml:68 msgid "" "Some video card manufacturers provide proprietary drivers for Linux which " "may only be available in the <emphasis>Nonfree</emphasis> repository and in " "some cases only from the card manufacturers' websites. The " "<emphasis>Nonfree</emphasis> repository needs to be explicitly enabled to " "access them. If you didn't enable it previously, you should do this after " "your first reboot." msgstr "" #. type: Content of: <section><info><title> #: en/configureX_chooser.xml:2 en/configureX_chooser.xml:23 msgid "Graphics Card and Monitor Configuration" msgstr "" #. type: Content of: <section><mediaobject> #: en/configureX_chooser.xml:28 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_chooser." "png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_chooser-im1\"/> </" "imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_chooser." "png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_chooser-im1\"/> </" "imageobject>" #. type: Content of: <section><para> #: en/configureX_chooser.xml:34 msgid "" "No matter which graphical environment (also known as desktop environment) " "you chose for this install of Mageia, they are all based on a graphical user " "interface system called <literal>X Window System</literal>, or simply " "<quote>X</quote>. So in order for KDE Plasma, GNOME, LXDE or any other " "graphical environment to work well, the following <quote>X</quote> settings " "need to be correct." msgstr "" #. type: Content of: <section><para> #: en/configureX_chooser.xml:41 msgid "" "Choose the appropriate settings manually if you think the details are " "incorrect, or if none are shown." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:46 msgid "<emphasis role=\"bold\">Graphics Card</emphasis>" msgstr "<emphasis role=\"bold\">Grafikkort</emphasis>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:49 msgid "" "If you need to, you can select a specific card from this expandable list. " "See <xref linkend=\"configureX_card_list\"/>." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:54 msgid "<emphasis role=\"bold\">Monitor</emphasis>" msgstr "<emphasis role=\"bold\">Skärm</emphasis>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:57 msgid "" "You can choose Plug 'n Play, if applicable, or choose your monitor from the " "<emphasis>Vendor</emphasis> or <emphasis>Generic</emphasis> lists. Choose " "<emphasis>Custom</emphasis> if you prefer to manually set the horizontal and " "vertical refresh rates of your monitor. See <xref linkend=" "\"configureX_monitor\"/>." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:65 msgid "<emphasis role=\"bold\">Resolution</emphasis>" msgstr "<emphasis role=\"bold\">Upplösning</emphasis>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:68 msgid "The resolution and color depth of your monitor can be set here." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:73 msgid "<emphasis role=\"bold\">Test</emphasis>" msgstr "<emphasis role=\"bold\">Prova</emphasis>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:76 msgid "" "The test button does not always appear during install. If the option is " "there, and you test your settings, you should be asked to confirm that your " "settings are correct. If you answer <emphasis>Yes</emphasis>, the settings " "will be kept. If you don't see anything, you'll return to the configuration " "screen and be able to reconfigure everything until the test result is " "satisfactory. If the test option is not available, then make sure your " "settings are on the safe side." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:87 msgid "<emphasis role=\"bold\">Options</emphasis>" msgstr "<emphasis role=\"bold\">Alternativ</emphasis>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:90 msgid "Here you can choose to enable or disable various options." msgstr "Här kan du välja att aktivera eller inaktivera olika alternativ." #. type: Content of: <section><warning><para> #: en/configureX_chooser.xml:95 msgid "" "There is a risk of damaging a monitor if you choose refresh rates that are " "outside the frequency range of that monitor. This applies to older CRT " "displays: modern monitors will reject an unsupported frequency and normally " "enter standby mode." msgstr "" #. type: Content of: <section><info><title> #: en/configureX_monitor.xml:2 en/configureX_monitor.xml:26 msgid "Choosing your Monitor" msgstr "Att välja din bildskärm" #. type: Content of: <section><para> #: en/configureX_monitor.xml:29 msgid "" "DrakX has a very comprehensive database of monitors and will usually " "correctly identify yours." msgstr "" "DrakX har en väldigt omfattande databas av grafikkort och kommer oftast att " "identifiera ditt nuvarande grafikkort rätt." #. type: Content of: <section><warning><para> #: en/configureX_monitor.xml:34 msgid "" "<emphasis role=\"bold\">Selecting a monitor with different characteristics " "could damage your monitor or video hardware. Please don't try something " "without knowing what you are doing.</emphasis> If in doubt you should " "consult your monitor documentation." msgstr "" #. type: Content of: <section><mediaobject> #: en/configureX_monitor.xml:42 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_monitor." "png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_monitor-im1\"/> </" "imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_monitor." "png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_monitor-im1\"/> </" "imageobject>" #. type: Content of: <section><variablelist><varlistentry><term> #: en/configureX_monitor.xml:50 msgid "Custom" msgstr "Anpassad" #. type: Content of: <section><variablelist><varlistentry><listitem><para> #: en/configureX_monitor.xml:53 msgid "" "This option allows you to set two critical parameters: the vertical refresh " "rate and the horizontal sync rate. Vertical refresh determines how often the " "screen is refreshed and horizontal sync is the rate at which scan lines are " "displayed." msgstr "" #. type: Content of: <section><variablelist><varlistentry><listitem><para> #: en/configureX_monitor.xml:59 msgid "" "It is <emphasis>VERY IMPORTANT</emphasis> that you do not specify a monitor " "type with a sync range that is beyond the capabilities of your monitor: you " "may damage your monitor. If in doubt, choose a conservative setting and " "consult your monitor documentation." msgstr "" "Det är <emphasis>VÄLDIGT VIKTIGT</emphasis> att du inte anger en skärmtyp " "med ett synkroniseringsintervall som är över kapaciteten för din bildskärm, " "då kan du skada den. Om du är osäker så välj en försiktig inställning och " "läs dokumentationen för din bildskärm." #. type: Content of: <section><variablelist><varlistentry><term> #: en/configureX_monitor.xml:68 msgid "Plug'n Play" msgstr "Plug'n Play" #. type: Content of: <section><variablelist><varlistentry><listitem><para> #: en/configureX_monitor.xml:71 msgid "" "This is the default option and automatically tries to determine the monitor " "type from the monitor database." msgstr "" #. type: Content of: <section><variablelist><varlistentry><listitem><para> #: en/configureX_monitor.xml:81 msgid "" "If the installer has not correctly detected your monitor and you know which " "one you have, you can choose it from the options by selecting:" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_monitor.xml:90 msgid "Manufacturer" msgstr "Tillverkare" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_monitor.xml:94 msgid "Monitor model" msgstr "" #. type: Content of: <section><variablelist><varlistentry><term> #: en/configureX_monitor.xml:100 msgid "Generic" msgstr "Allmänna" #. type: Content of: <section><variablelist><varlistentry><listitem><para> #: en/configureX_monitor.xml:103 msgid "" "Selecting this group will list approximately 30 display configurations such " "as 1024x768 @ 60Hz and includes flat-panel displays as used in laptops. " "This is often a good monitor selection group if you need to use the VESA " "card driver when your video hardware cannot be determined automatically. " "Once again, it may be wise to be conservative in your selections." msgstr "" #. type: Attribute 'xreflabel' of: <section> #: en/diskdrake.xml:2 msgid "DiskDrake" msgstr "" #. type: Content of: <section><info><title> #: en/diskdrake.xml:24 msgid "Custom Disk Partitioning with DiskDrake" msgstr "Anpassad diskpartitionering med DiskDrake" #. type: Content of: <section><mediaobject> #: en/diskdrake.xml:29 msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-diskdrake.png\"/> </imageobject> <imageobject condition=\"live\"> " "<imagedata align=\"center\" fileref=\"live-diskdrake.png\"/> </imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-diskdrake.png\"/> </imageobject> <imageobject condition=\"live\"> " "<imagedata align=\"center\" fileref=\"live-diskdrake.png\"/> </imageobject>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/diskdrake.xml:40 msgid "" "Modify the layout of your disk(s) here. You can remove or create partitions, " "change the filesystem or size of a partition and even view their details " "before you start." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/diskdrake.xml:47 msgid "" "There is a tab at the top for every detected hard disk (or other storage " "device, like a USB key), for example: <filename>sda</filename>, " "<filename>sdb</filename>, <filename>sdc</filename> etc." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/diskdrake.xml:54 msgid "" "For all other actions: click on the desired partition first. Then view it, " "or choose a filesystem and a mount point, resize it or wipe it. " "<emphasis>Expert mode</emphasis> provides more options such as to label " "(name) a partition, or to choose a partition type." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/diskdrake.xml:62 msgid "" "Continue until you have adjusted everything to your satisfaction, then click " "<emphasis>Done</emphasis> when you're ready." msgstr "" #. type: Content of: <section><warning><orderedlist><listitem><para> #: en/diskdrake.xml:71 msgid "" "Take care with the <emphasis>Clear all</emphasis> option, use it only if you " "are sure you want to wipe all partitions on the selected storage device." msgstr "" #. type: Content of: <section><warning><orderedlist><listitem><para> #: en/diskdrake.xml:77 msgid "" "If you wish to use encryption on your <filename>/</filename> partition you " "must ensure that you have a separate <filename>/boot</filename> partition. " "The encryption option for the <filename>/boot</filename> partition must NOT " "be set, otherwise your system will be unbootable." msgstr "" #. type: Content of: <section><important><itemizedlist><listitem><para> #: en/diskdrake.xml:89 msgid "" "If you are installing Mageia on a UEFI system, check that an ESP (EFI System " "Partition) is present and correctly mounted on <filename>/boot/EFI</" "filename>. See Figure 1 below." msgstr "" #. type: Content of: <section><important><itemizedlist><listitem><para> #: en/diskdrake.xml:95 msgid "" "If you are installing Mageia on a Legacy/GPT system, check that a BIOS boot " "partition is present and of the correct type. See Figure 2 below." msgstr "" #. type: Content of: <section><figure><title> #: en/diskdrake.xml:103 msgid "EFI System Partition" msgstr "EFI systempartition" #. type: Content of: <section><figure><mediaobject> #: en/diskdrake.xml:106 msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-diskdrake2.png\"/> </imageobject> <imageobject condition=\"live\"> " "<imagedata align=\"center\" fileref=\"live-diskdrake2.png\"/> </imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-diskdrake2.png\"/> </imageobject> <imageobject condition=\"live\"> " "<imagedata align=\"center\" fileref=\"live-diskdrake2.png\"/> </imageobject>" #. type: Content of: <section><figure> #: en/diskdrake.xml:105 en/diskdrake.xml:119 msgid "<placeholder type=\"mediaobject\" id=\"0\"/>" msgstr "<placeholder type=\"mediaobject\" id=\"0\"/>" #. type: Content of: <section><figure><title> #: en/diskdrake.xml:117 msgid "BIOS boot partition" msgstr "" #. type: Content of: <section><mediaobject> #: en/diskdrake.xml:120 en/doPartitionDisks.xml:206 msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=\"live" "\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks3.png\"/> </" "imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=\"live" "\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks3.png\"/> </" "imageobject>" #. type: Content of: <section><title> #: en/diskPartitioning.xml:1 en/diskPartitioning.xml:4 msgid "Partitioning" msgstr "Partitionering" #. type: Attribute 'xml:lang' of: <section> #: en/diskPartitioning.xml:1 msgid "en" msgstr "sv" #. type: Content of: <section><info><title> #: en/doPartitionDisks.xml:31 msgid "Suggested Partitioning" msgstr "Föreslagen partitionering" #. type: Content of: <section><para> #: en/doPartitionDisks.xml:34 msgid "" "In this screen you can see the content of your hard drive(s) along with the " "DrakX partitioning proposals for where to install Mageia." msgstr "" #. type: Content of: <section><para> #: en/doPartitionDisks.xml:38 msgid "" "The actual options available from those shown below will vary according to " "the layout and content of your particular hard drive(s)." msgstr "" #. type: Content of: <section><mediaobject> #: en/doPartitionDisks.xml:43 msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-doPartitionDisks.png\"/> </imageobject> <imageobject condition=\"live" "\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks.png\"/> </" "imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-doPartitionDisks.png\"/> </imageobject> <imageobject condition=\"live" "\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks.png\"/> </" "imageobject>" #. type: Content of: <section><itemizedlist><title> #: en/doPartitionDisks.xml:53 msgid "Main Options" msgstr "Huvudsakliga alternativ" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:56 msgid "<emphasis role=\"bold\">Use Existing Partitions</emphasis>" msgstr "<emphasis role=\"bold\">Använd befintliga partitioner</emphasis>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:59 msgid "" "If this option is available, then existing Linux compatible partitions have " "been found and may be used for the installation." msgstr "" "Om det här alternativet är tillgängligt så har kompatibla Linux-partitioner " "hittats och kan användas för installation." #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:65 msgid "<emphasis role=\"bold\">Use Free Space</emphasis>" msgstr "<emphasis role=\"bold\">Använd oanvänt utrymme</emphasis>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:68 msgid "" "If you have unused space on your hard drive then this option will use it for " "your new Mageia installation." msgstr "" "Om du har ledigt utrymme på din hårddisk kommer det här alternativet att " "använda det för att installera Mageia." #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:74 msgid "" "<emphasis role=\"bold\">Use Free Space on a Windows Partition</emphasis>" msgstr "" "<emphasis role=\"bold\">Använd oanvänt utrymme i en Windows-partition</" "emphasis>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:77 msgid "" "If you have unused space on an existing Windows partition, the installer may " "offer to use it. This can be a useful way of making room for your new Mageia " "installation but see the warning below." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para><mediaobject> #: en/doPartitionDisks.xml:87 msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-doPartitionDisks2.png\"/> </imageobject> <imageobject condition=\"live" "\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks2.png\"/> </" "imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-doPartitionDisks2.png\"/> </imageobject> <imageobject condition=\"live" "\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks2.png\"/> </" "imageobject>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:82 msgid "" "With this option, the installer displays the remaining Windows partition in " "light blue and the proposed Mageia partition in dark blue with their " "intended sizes just underneath. You have the option to modify these sizes by " "clicking and dragging the gap between both partitions. See the following " "screenshot:<placeholder type=\"mediaobject\" id=\"0\"/>" msgstr "" #. type: Content of: <section><itemizedlist><listitem><warning><para> #: en/doPartitionDisks.xml:97 msgid "" "This involves shrinking the size of the Windows partition, and therefore is " "a risky operation, so you should make sure you have backed up all important " "files before proceeding." msgstr "" #. type: Content of: <section><itemizedlist><listitem><important><para> #: en/doPartitionDisks.xml:103 msgid "" "The partition must be \"clean\", meaning that Windows must have closed down " "correctly the last time it was used. It must also have been defragmented, " "although this is not a guarantee that all files in the partition have been " "moved out of the area that is about to be used for Mageia." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:112 msgid "<emphasis role=\"bold\">Erase and use Entire Disk</emphasis>" msgstr "<emphasis role=\"bold\">Radera och använd hela hårddisken</emphasis>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:115 msgid "This option will allocate the entire drive for Mageia" msgstr "Det här alternativet kommer att allokera hela disken för Mageia" #. type: Content of: <section><itemizedlist><listitem><warning><para> #: en/doPartitionDisks.xml:119 msgid "" "This will erase ALL data on the selected hard drive. Take care! If you " "intend to use part of the disk for something else, or you already have data " "on the drive that you are not prepared to lose, then do not use this option." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:127 msgid "<emphasis role=\"bold\">Custom Disk Partitioning</emphasis>" msgstr "<emphasis role=\"bold\">Anpassad diskpartitionering</emphasis>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:130 msgid "" "This gives you complete control over the placing of the installation on your " "hard drive(s)." msgstr "" "Detta ger dig fullständig kontroll över placeringen av installationen på din/" "a disk/ar." #. type: Content of: <section><para> #: en/doPartitionDisks.xml:136 msgid "" "If you are not using the <emphasis>Custom disk partitioning</emphasis> " "option, then the installer will allocate the available space according to " "the following rules:" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:142 msgid "" "If the total available space is less than 50 GB, then only one partition is " "created. This will be the <filename>/</filename> (root) partition." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:148 msgid "" "If the total available space is greater than 50 GB, then three partitions " "are created" msgstr "" "Om det totala tillgängliga utrymmet är större än 50 GB så skapas tre " "partitioner" #. type: Content of: <section><itemizedlist><listitem><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:153 msgid "" "6/19 of the total available place is allocated to <filename>/</filename> " "with a maximum of 50 GB" msgstr "" #. type: Content of: <section><itemizedlist><listitem><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:158 msgid "1/19 is allocated to <filename>swap</filename> with a maximum of 4 GB" msgstr "1/19 är allokerat till <filename>swap</filename>med maximalt 4 GB" #. type: Content of: <section><itemizedlist><listitem><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:163 msgid "the rest (at least 12/19) is allocated to <filename>/home</filename>" msgstr "" #. type: Content of: <section><para> #: en/doPartitionDisks.xml:170 msgid "" "This means that from 160 GB or greater available space, the installer will " "create three partitions:" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:175 msgid "50 GB for <filename>/</filename>" msgstr "50 GB för <filename>/</filename>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:179 msgid "4 GB for <filename>swap</filename>" msgstr "4 GB för <filename>swap</filename>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:183 msgid "and the remainder for <filename>/home</filename>" msgstr "och det som återstår till <filename>/home</filename>" #. type: Content of: <section><note><para> #: en/doPartitionDisks.xml:188 msgid "" "If you are using a UEFI system, the ESP (EFI System Partition) will be " "automatically detected - or created if it does not exist yet - and mounted " "on <filename>/boot/EFI</filename>. The <emphasis>Custom disk partitioning</" "emphasis> option is the only one that allows to check it has been correctly " "done." msgstr "" #. type: Content of: <section><note><para> #: en/doPartitionDisks.xml:194 msgid "" "If you are using a Legacy (also known as BIOS) system with a GPT partitioned " "disk, you need to create a BIOS boot partition if it doesn't already exist. " "It should be about 1 MiB with no mount point. It can be created with the " "Installer, under <emphasis>Custom disk partitioning</emphasis>, like any " "other partition. Be sure to select <quote>BIOS boot partition</quote> for " "filesystem type." msgstr "" #. type: Content of: <section><note><para> #: en/doPartitionDisks.xml:201 msgid "See <xref linkend=\"diskdrake\"/> for information on how to proceed." msgstr "Se <xref linkend=\"diskdrake\"/> för information om hur du fortsätter." #. type: Content of: <section><mediaobject> #: en/doPartitionDisks.xml:216 msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-doPartitionDisks4.png\"/> </imageobject> <imageobject condition=\"live" "\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks4.png\"/> </" "imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-doPartitionDisks4.png\"/> </imageobject> <imageobject condition=\"live" "\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks4.png\"/> </" "imageobject>" #. type: Content of: <section><important><para> #: en/doPartitionDisks.xml:226 msgid "" "Some newer drives are now using 4096 byte logical sectors, instead of the " "previous standard of 512. Due to lack of available hardware, the " "partitioning tool used in the installer has not been tested with such a " "drive." msgstr "" #. type: Content of: <section><important><para> #: en/doPartitionDisks.xml:231 msgid "" "Some SSD devices now use an erase block size over 1 MB. If you have such a " "device we suggest that you partition the drive in advance, using an " "alternative partitioning tool like gparted, and to use the following " "settings:" msgstr "" #. type: Content of: <section><important><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:238 msgid "<emphasis>Align to</emphasis> = MiB" msgstr "<emphasis>Justera till</emphasis> = MiB" #. type: Content of: <section><important><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:242 msgid "<emphasis>Free space preceding (MiB)</emphasis> = 2" msgstr "" #. type: Content of: <section><important><para> #: en/doPartitionDisks.xml:246 msgid "" "Also make sure all partitions are created using an even number of megabytes." msgstr "" #. type: Content of: <article><info><title> #: en/DrakLive-cover.xml:5 en/DrakLive-cover.xml:31 en/DrakLive.xml:18 msgid "Installation from LIVE medium" msgstr "Installation från ett LIVE-media" #. type: Content of: <book><info> #: en/DrakLive-cover.xml:6 en/DrakX-cover.xml:4 msgid "<publisher> <publishername>Mageia.org</publishername> </publisher>" msgstr "<publisher> <publishername>Mageia.org</publishername> </publisher>" #. type: Content of: <book><info><revhistory><revision><date> #: en/DrakLive-cover.xml:11 en/DrakX-cover.xml:9 msgid "05 December 2020" msgstr "05 December 2020" #. type: Content of: <book><info><revhistory><revision><revremark> #: en/DrakLive-cover.xml:12 en/DrakX-cover.xml:10 msgid "Mageia 8" msgstr "Mageia 8" #. type: Content of: <book><info><cover><para> #: en/DrakLive-cover.xml:16 en/DrakX-cover.xml:14 msgid "The Official Documentation for Mageia" msgstr "Mageias officiella dokumentation" #. type: Content of: <book><info><cover><mediaobject> #: en/DrakLive-cover.xml:18 en/DrakX-cover.xml:16 msgid "" "<imageobject> <imagedata fileref=\"../mageia-2013.png\"/> </imageobject>" msgstr "<imageobject><imagedata fileref=\"../mageia-2013.png\"/></imageobject>" #. type: Content of: <article><info><cover><para> #: en/DrakLive-cover.xml:22 en/DrakLive.xml:27 en/DrakX-cover.xml:20 #: en/DrakX-inline.xml:12 en/DrakX.xml:45 msgid "" "The texts and screenshots in this manual are available under the CC BY-SA " "3.0 license <link ns6:href=\"http://creativecommons.org/licenses/by-sa/3.0/" "\">http://creativecommons.org/licenses/by-sa/3.0/</link>." msgstr "" "Texter och skärmdumpar i denna manual finns under CC BY-SA 3.0 licensen " "<link ns6:href=\"http://creativecommons.org/licenses/by-sa/3.0/\">http://" "creativecommons.org/licenses/by-sa/3.0/</link>" #. type: Content of: <article><info><cover><para> #: en/DrakLive-cover.xml:24 en/DrakLive.xml:31 en/DrakX-cover.xml:22 #: en/DrakX-inline.xml:15 en/DrakX.xml:49 msgid "" "This manual was produced with the help of the <link ns6:href=\"http://www." "calenco.com\">Calenco CMS</link> developed by <link ns6:href=\"http://www." "neodoc.biz\">NeoDoc</link>." msgstr "" "Denna manual är producerad med hjälp av <link ns6:href=\"http://www.calenco." "com\">Calenco CMS</link> utvecklad av <link ns6:href=\"http://www.neodoc.biz" "\">NeoDoc</link>" #. type: Content of: <article><info><cover><para> #: en/DrakLive-cover.xml:25 en/DrakX-cover.xml:23 en/DrakX-inline.xml:17 #: en/DrakX.xml:53 msgid "" "It was written by volunteers in their free time. Please contact <link ns6:" "href=\"https://wiki.mageia.org/en/Documentation_team\">Documentation Team</" "link>, if you would like to help improve this manual." msgstr "" "Den är skriven av frivilliga på deras fritid. Kontakta <link ns6:href=" "\"https://wiki.mageia.org/en/Documentation_team\">Dokumentations-teamet</" "link> om du vill hjälpa till och förbättra den här manualen." #. type: Content of: <section><itemizedlist><listitem><para><note> #: en/DrakLive-cover.xml:32 en/DrakLive.xml:21 en/DrakX-cover.xml:36 #: en/DrakX-inline.xml:6 en/DrakX.xml:39 en/selectKeyboard.xml:49 msgid "<note>" msgstr "<note>" #. type: Content of: <article><info><cover><para><note><para> #: en/DrakLive-cover.xml:32 en/DrakLive.xml:22 en/DrakX-cover.xml:36 #: en/DrakX-inline.xml:7 en/DrakX.xml:40 msgid "" "No one will see all the installer screens that you see in this manual. Which " "screens you will see, depends on your hardware and the choices you make " "while installing." msgstr "" "Ingen kommer att se alla installerarens skärmbilder som du ser i den här " "handboken. Vilka skärmbilder som just du kommer att se beror på din hårdvara " "och vilka val du gör under installationen." #. type: Content of: <section><itemizedlist><listitem><para> #: en/DrakLive-cover.xml:34 en/DrakLive.xml:25 en/DrakX-cover.xml:38 #: en/DrakX-inline.xml:10 en/DrakX.xml:43 en/selectKeyboard.xml:56 msgid "</note>" msgstr "</note>" #. type: Content of: <article><info><cover><para> #: en/DrakLive.xml:35 msgid "" "It was written by volunteers in their free time. Please contact the <link " "ns6:href=\"https://wiki.mageia.org/en/Documentation_team\">Documentation " "Team</link>, if you would like to help improve this manual." msgstr "" "Den skrevs av frivilliga. Kontakta Dokumentations-teamet om du vill \n" "vill hjälpa till att förbättra manualen." #. type: Content of: <article><info><title> #: en/DrakX-cover.xml:3 en/DrakX-cover.xml:35 en/DrakX-inline.xml:3 #: en/DrakX.xml:36 msgid "Installation with DrakX" msgstr "Installation med DrakX" #. type: Content of: <section><info><title> #: en/exitInstall.xml:3 msgid "Congratulations" msgstr "Grattis" #. Lebarhon 20170209 updated SC #. 2018/02/12 apb: Text and typography. #. 2018/02/25 apb: Added clickable link to mageia.org #. type: Content of: <section><mediaobject> #: en/exitInstall.xml:13 msgid "" "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-exitInstall.png\" " "align=\"center\" revision=\"1\" xml:id=\"exitInstall-im1\"/> </imageobject>" msgstr "" "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-exitInstall.png\" " "align=\"center\" revision=\"1\" xml:id=\"exitInstall-im1\"/> </imageobject>" #. type: Content of: <section><para> #: en/exitInstall.xml:18 msgid "" "You have finished installing and configuring Mageia and it is now safe to " "remove the installation medium and reboot your computer." msgstr "" #. type: Content of: <section><para> #: en/exitInstall.xml:22 msgid "" "After rebooting, you can use the bootloader screen to choose which operating " "system to start (if there are more than one on your computer)." msgstr "" #. type: Content of: <section><para> #: en/exitInstall.xml:26 msgid "" "If you didn't adjust the settings for the bootloader, your Mageia install " "will be automatically selected and started." msgstr "" "Om du inte ändrade inställningarna för starthanteraren så kommer Mageia att " "väljas och starta automatiskt." #. type: Content of: <section><para> #: en/exitInstall.xml:30 msgid "Enjoy!" msgstr "Njut!" #. type: Content of: <section><para> #: en/exitInstall.xml:32 msgid "" "Visit <link ns4:href=\"http://www.mageia.org/en/\">www.mageia.org/en/</link> " "if you have any questions or want to contribute to Mageia" msgstr "" #. type: Content of: <section><info><title> #: en/firewall.xml:2 en/firewall.xml:16 msgid "Firewall" msgstr "Brandvägg" #. type: Content of: <section><para> #: en/firewall.xml:19 msgid "" "This section allows you to configure some simple firewall rules: they " "determine which type of message from the Internet will be accepted by the " "target system. This, in turn, allows the corresponding services on the " "system to be accessible from the Internet." msgstr "" #. type: Content of: <section><mediaobject> #: en/firewall.xml:26 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-firewall.png\"/> </" "imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-firewall.png\"/> </" "imageobject>" #. type: Content of: <section><para> #: en/firewall.xml:31 msgid "" "In the default setting (no button is checked), no service of the system is " "accessible from the network. The <emphasis>Everything (no firewall)</" "emphasis> option enables access to all services of the machine - an option " "that does not make much sense in the context of the installer since it would " "create a totally unprotected system. Its veritable use is in the context of " "the Mageia Control Center (which uses the same GUI layout) for temporarily " "disabling the entire set of firewall rules for testing and debugging " "purposes." msgstr "" #. type: Content of: <section><para> #: en/firewall.xml:40 msgid "" "All other options are more or less self-explanatory. As an example, you will " "enable the CUPS server if you want printers on your machine to be accessible " "from the network." msgstr "" #. type: Content of: <section><para> #: en/firewall.xml:44 msgid "<emphasis role=\"bold\">Advanced</emphasis>" msgstr "<emphasis role=\"bold\">Avancerat</emphasis>" #. type: Content of: <section><para> #: en/firewall.xml:46 msgid "" "The <emphasis>Advanced</emphasis> option opens a window where you can enable " "a series of services by typing a list of <quote>couples</quote> (blank " "separated)" msgstr "" #. type: Content of: <section><para> #: en/firewall.xml:50 msgid "<emphasis><port-number>/<protocol></emphasis>" msgstr "" #. type: Content of: <section><simplelist><member> #: en/firewall.xml:53 msgid "" "- <emphasis><port-number></emphasis> is the value of the port assigned " "to the service you want to enable (e.g. 873 for the RSYNC service) as " "defined in <emphasis>RFC-433</emphasis>;" msgstr "" #. type: Content of: <section><simplelist><member> #: en/firewall.xml:57 msgid "" "- <emphasis><protocol></emphasis> is one of <emphasis>TCP</emphasis> " "or <emphasis>UDP</emphasis> - the internet protocol that is used by the " "service." msgstr "" #. type: Content of: <section><para> #: en/firewall.xml:62 msgid "" "For instance, the entry for enabling access to the RSYNC service therefore " "is <emphasis>873/tcp</emphasis>." msgstr "" #. type: Content of: <section><para> #: en/firewall.xml:65 msgid "" "In case a service is implemented to use both protocols, you specify 2 " "couples for the same port." msgstr "" #. type: Content of: <section><info><title> #: en/formatPartitions.xml:10 msgid "Formatting" msgstr "Formatering" #. Made by marja on 2012 03 29 #. NEEDS TO BE REVIEWED! #. marja 2012-04-24 added screenshot #. marja 2012-04-24 added emphasis tags in formatPartitions-pa1 #. 2018/02/10 apb: Text and typography. #. type: Content of: <section><mediaobject> #: en/formatPartitions.xml:24 msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-formatPartitions.png\" format=\"PNG\" revision=\"1\" xml:id=" "\"formatPartitions-im1\"/> </imageobject> <imageobject condition=\"live\"> " "<imagedata align=\"center\" fileref=\"live-formatPartitions.png\" format=" "\"PNG\" revision=\"1\" xml:id=\"live-formatPartitions-im1\"/> </imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-formatPartitions.png\" format=\"PNG\" revision=\"1\" xml:id=" "\"formatPartitions-im1\"/> </imageobject> <imageobject condition=\"live\"> " "<imagedata align=\"center\" fileref=\"live-formatPartitions.png\" format=" "\"PNG\" revision=\"1\" xml:id=\"live-formatPartitions-im1\"/> </imageobject>" #. type: Content of: <section><para> #: en/formatPartitions.xml:35 msgid "" "Here you can choose which partition(s) you wish to format. Any data on " "partitions <emphasis>not</emphasis> marked for formatting will be preserved." msgstr "" #. type: Content of: <section><para> #: en/formatPartitions.xml:39 msgid "" "Usually, at least the partitions that DrakX selected need to be formatted." msgstr "" #. type: Content of: <section><para> #: en/formatPartitions.xml:42 msgid "" "Click on <emphasis>Advanced</emphasis> to choose the partitions you want to " "check for so-called <emphasis>bad blocks</emphasis>" msgstr "" #. type: Content of: <section><tip><para> #: en/formatPartitions.xml:47 msgid "" "If you're not sure you have made the right choice, you can click on " "<emphasis>Previous</emphasis>, again on <emphasis>Previous</emphasis> and " "then on <emphasis>Custom</emphasis> to get back to the main screen, where " "you can choose to view details of your partitions." msgstr "" #. type: Content of: <section><para> #: en/formatPartitions.xml:54 msgid "" "When you are confident about the selections, click on <emphasis>Next</" "emphasis> to continue." msgstr "" #. type: Content of: <section><info><title> #: en/graphicalConfiguration.xml:13 msgid "Graphical Configuration" msgstr "Grafisk konfiguration" #. type: Content of: <section><info><title> #: en/installer.xml:34 msgid "DrakX, the Mageia Installer" msgstr "DrakX, Mageias installerare" #. type: Content of: <section><para> #: en/installer.xml:37 msgid "" "Whether you are new to GNU-Linux or an experienced user, the Mageia " "Installer is designed to help make your installation or upgrade as easy as " "possible." msgstr "" "Oavsett om du är ny på GNU-Linux eller en erfaren användare så är Mageias " "installerare utformad för att göra din installation eller uppgradering så " "enkel som möjligt." #. type: Content of: <section><section><title> #: en/installer.xml:42 msgid "The installation steps" msgstr "Installationsstegen" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/installer.xml:46 msgid "" "The install process is divided into a number of steps - the status of which " "is indicated in a panel to the left of the screen." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/installer.xml:52 msgid "" "Each step has one or more screens, which may also have <emphasis>Advanced</" "emphasis> sections with extra, less commonly required options." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/installer.xml:58 msgid "" "Most screens have <emphasis>Help</emphasis> buttons for further details " "about the particular step." msgstr "" #. type: Content of: <section><section><caution><para> #: en/installer.xml:64 msgid "" "If at some point during the install you decide to abort the installation, it " "is possible to reboot, but please think twice before you do this. Once a " "partition has been formatted or updates have started to be installed, your " "computer is no longer in the same state and rebooting it could very well " "leave you with an unusable system." msgstr "" #. type: Content of: <section><section><caution><para> #: en/installer.xml:70 msgid "" "If, in spite of this, you are very sure rebooting is what you want, go to a " "text terminal by pressing the keys <keycombo> <keycap>Ctrl</keycap> " "<keycap>Alt</keycap> <keycap>F2</keycap> </keycombo> together. After that, " "press <keycombo> <keycap>Ctrl</keycap> <keycap>Alt</keycap> <keycap>Delete</" "keycap> </keycombo> together to reboot." msgstr "" #. type: Content of: <section><section><title> #: en/installer.xml:88 msgid "Installation Welcome Screen" msgstr "Välkomstskärm för installationen" #. type: Content of: <section><section><para> #: en/installer.xml:90 msgid "" "The particular screen that you will first see when booting from the " "Installation media will depend on whether your computer motherboard is of " "the Legacy (BIOS) or UEFI type." msgstr "" #. type: Content of: <section><section><para> #: en/installer.xml:94 msgid "" "The welcome menu screen has various options, however the default option will " "start the installer, and is normally all that you will need." msgstr "" #. type: Content of: <section><section><section><title> #: en/installer.xml:99 msgid "Legacy (BIOS) Systems" msgstr "Äldre (BIOS)-system" #. type: Content of: <section><section><section><mediaobject> #: en/installer.xml:102 #, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"../dx-welcome.png\"/> </" "imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"dx-welcome.png\"/> </" "imageobject>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:113 msgid "" "Install Mageia to a hard disk. This is the default option, and will " "automatically start after a short while unless another option is selected." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:119 msgid "<emphasis role=\"bold\">Rescue System</emphasis>" msgstr "<emphasis role=\"bold\">Räddningssytem</emphasis>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:121 msgid "" "This option allows you to either re-install the bootloader for an existing " "Mageia installation or you can use it to restore a Windows bootloader." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:134 msgid "<emphasis role=\"bold\">F2: Language</emphasis>" msgstr "<emphasis role=\"bold\">F2: Språk</emphasis>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:136 msgid "Press F2 for alternative languages." msgstr "Tryck F2 för alternativa språk." #. type: Content of: <section><section><section><title> #: en/installer.xml:142 msgid "UEFI Systems" msgstr "UEFI-system" #. type: Content of: <section><section><section><para> #: en/installer.xml:144 msgid "" "From this screen, you can access options by pressing <keycap>e</keycap> to " "enter the edit mode. To come back to this screen, press <keycap>Esc</keycap> " "to quit without saving or press <keycap>F10</keycap> to save and quit." msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/installer.xml:150 #, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"../dx-welcome2.png\"/> </" "imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"dx-welcome2.png\"/> </" "imageobject>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:159 msgid "<emphasis role=\"bold\">Install:</emphasis> Start the Install process" msgstr "" "<emphasis role=\"bold\">Installera:</emphasis> Påbörja installationsprocessen" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:164 msgid "" "<emphasis role=\"bold\">Rescue:</emphasis> This option allows you to either " "re-install the bootloader for an existing Mageia installation or you can use " "it to restore a Windows bootloader." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:171 msgid "" "<emphasis role=\"bold\">F2: Language:</emphasis> Press <keycap>F2</keycap> " "for alternative languages." msgstr "" "<emphasis role=\"bold\">F2: Språk:</emphasis> Tryck <keycap>F2</keycap> för " "alternativa språk." #. type: Content of: <section><section><section><para> #: en/installer.xml:176 msgid "" "If you booted from a USB stick, you will see the above options duplicated, " "and in this case, you should use the set that will be suffixed with \"USB\"." msgstr "" #. type: Content of: <section><section><title> #: en/installer.xml:183 msgid "Installation Problems and Possible Solutions" msgstr "Installationsproblem och möjliga lösningar" #. type: Content of: <section><section><section><title> #: en/installer.xml:186 msgid "No Graphical Interface" msgstr "Inget grafiskt gränssnitt" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:190 msgid "" "After the initial screen you did not progress to the <emphasis>Language " "Selection</emphasis> screen. This can happen with some graphic cards and " "older systems. Try using low resolution by typing <command>vgalo</command> " "at the prompt." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:197 msgid "" "If the hardware is very old, a graphical installation may not be possible. " "In this case it is worth trying a text-mode installation. To use this press " "<keycap>Esc</keycap> at the <emphasis>Welcome</emphasis> screen and confirm " "with <keycap>ENTER</keycap>. You will be presented with a black screen with " "a <prompt>boot:</prompt> prompt. Type <command>text</command> and press " "<keycap>ENTER</keycap> to continue with the installation in text mode." msgstr "" #. type: Content of: <section><section><section><title> #: en/installer.xml:210 msgid "The Install Freezes" msgstr "Installationen hänger sig" #. type: Content of: <section><section><section><para> #: en/installer.xml:212 msgid "" "If the system appeared to freeze during the installation, this may be a " "problem with hardware detection. In this case the automatic hardware " "detection may be bypassed and dealt with later. To try this, type " "<command>noauto</command> at the prompt. This option may also be combined " "with other parameters as necessary." msgstr "" #. type: Content of: <section><section><section><title> #: en/installer.xml:220 msgid "RAM problem" msgstr "RAM-problem" #. type: Content of: <section><section><section><para> #: en/installer.xml:222 msgid "" "This will rarely be needed, but in some cases the hardware may report the " "available RAM incorrectly. To specify this manually, you can use the " "<literal>mem=<replaceable>xxx</replaceable>M</literal> parameter, where " "<replaceable>xxx</replaceable> is the correct amount of RAM. e.g. " "<literal>mem=256M</literal> would specify 256MB of RAM." msgstr "" #. type: Content of: <section><section><section><title> #: en/installer.xml:230 msgid "Dynamic partitions" msgstr "Dynamiska partitioner" #. type: Content of: <section><section><section><para> #: en/installer.xml:232 msgid "" "If you converted your hard disk from <literal>Basic</literal> format to " "<literal>Dynamic</literal> format in Microsoft Windows, then it is not " "possible to install Mageia on this disc. To revert to a <literal>Basic</" "literal> disk, see the Microsoft documentation: <link ns2:href=\"http://msdn." "microsoft.com/en-us/library/cc776315.aspx\">http://msdn.microsoft.com/en-us/" "library/cc776315.aspx</link>." msgstr "" #. type: Content of: <section><info><title> #: en/installUpdates.xml:25 msgid "Updates" msgstr "Uppdateringar" #. type: Content of: <section><mediaobject> #: en/installUpdates.xml:29 msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-installUpdates.png\" format=\"png\" revision=\"1\" xml:id=" "\"installUpdates-im1\"/> </imageobject> <imageobject condition=\"live\"> " "<imagedata align=\"center\" fileref=\"live-installUpdates.png\" format=\"png" "\"/> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/installUpdates.xml:39 msgid "" "Since this version of Mageia was released, some packages will have been " "updated or improved." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installUpdates.xml:44 msgid "" "Select <emphasis>Yes</emphasis> if you wish to download and install them" msgstr "Välj <emphasis>Ja</emphasis> om du önskar ladda ner och installera dem" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installUpdates.xml:49 msgid "" "Select <emphasis>No</emphasis> if you don't want to do this now, or if you " "aren't connected to the Internet" msgstr "" "Välj <emphasis>Nej</emphasis>om du inte vill göra det här nu eller om du " "inte är ansluten till internet" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installUpdates.xml:54 msgid "Press <emphasis>Next</emphasis> to continue" msgstr "<emphasis>Tryck Nästa</emphasis> för att fortsätta" #. type: Content of: <section><title> #: en/locale.xml:9 msgid "Locale" msgstr "" #. type: Content of: <section><info><title> #: en/login.xml:4 msgid "Login Screen" msgstr "Inloggningsskärm" #. type: Content of: <section><mediaobject> #: en/login.xml:7 msgid "" "<imageobject> <imagedata format=\"PNG\" xml:id=\"login-im1\" fileref=\"live-" "login.png\" align=\"center\" revision=\"1\"/> </imageobject>" msgstr "" "<imageobject> <imagedata format=\"PNG\" xml:id=\"login-im1\" fileref=\"live-" "login.png\" align=\"center\" revision=\"1\"/> </imageobject>" #. type: Content of: <section><mediaobject><caption><para> #: en/login.xml:11 msgid "SDDM login screen" msgstr "Inloggningsskärm för SDDM" #. type: Content of: <section><para> #: en/login.xml:14 msgid "Finally, you will come to the desktop login screen." msgstr "" #. type: Content of: <section><para> #: en/login.xml:15 msgid "" "Enter your user name and user password, and in a few seconds you will find " "yourself with a loaded KDE Plasma or GNOME desktop, depending on which live " "medium you used. You can now start using and enjoying your Mageia " "installation." msgstr "" #. type: Content of: <section><para> #: en/login.xml:16 msgid "" "You can find further documentation in <link ns6:href=\"https://wiki.mageia." "org/en/Main_Page\">the Mageia wiki</link>." msgstr "" #. type: Content of: <section><info><title> #: en/media_selection.xml:10 msgid "Available Media" msgstr "Tillgängligt media" #. papoteur 2013-04-11 - created #. marja 2013-04-16 added screenshot + made title longer (because it was the same as for add_supplemental_media) #. marja 2013-04-16 s/in/during/ as suggested by Tristan Campbell #. marja 2013-04-17 s/xml:id="media-selection"/xml:id="media_selection"/ (html filename was wrong) #. 2019.01.05 apb: Changed Ati to AMD in Nonfree para. #. 2019.01.16 apb: Changed title to Available Media. #. type: Content of: <section><mediaobject> #: en/media_selection.xml:26 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-media_selection.png" "\" format=\"PNG\" revision=\"1\" xml:id=\"media_selection-im1\"/> </" "imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-media_selection.png" "\" format=\"PNG\" revision=\"1\" xml:id=\"media_selection-im1\"/> </" "imageobject>" #. type: Content of: <section><para> #: en/media_selection.xml:32 msgid "" "Here you have the list of available repositories. Not all repositories are " "available, according to which media you use for installing. The repositories " "selection determines which packages will be available for selection during " "the next steps." msgstr "" "Här har du en lista över tillgängliga arkiv. Alla arkiv är inte tillgängliga " "beroende på vilket media du använder för att installera. Valet av arkiv " "bestämmer vilka paket som kommer att vara tillgängliga för val i " "nästkommande steg." #. type: Content of: <section><itemizedlist><listitem><para> #: en/media_selection.xml:39 msgid "" "The <emphasis>Core</emphasis> repository cannot be disabled as it contains " "the base of the distribution." msgstr "" "<emphasis>Core</emphasis>-arkivet kan inte inaktiveras eftersom det " "innehåller basen för distributionen." #. type: Content of: <section><itemizedlist><listitem><para> #: en/media_selection.xml:44 msgid "" "The <emphasis>Nonfree</emphasis> repository includes packages that are free-" "of-charge, i.e. Mageia may redistribute them, but they contain closed-source " "software (hence the name - Nonfree). For example this repository includes " "nVidia and AMD graphics card proprietary drivers, firmware for various WiFi " "cards, etc." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/media_selection.xml:52 msgid "" "The <emphasis>Tainted</emphasis> repository includes packages released under " "a free license. The main criteria for placing packages in this repository is " "that they may infringe patents and copyright laws in some countries, e.g. " "multimedia codecs needed to play various audio/video files; packages needed " "to play commercial video DVD's, etc." msgstr "" "Filförrådet <emphasis>Tainted</emphasis> inkluderar paket som släpps under " "en Fri licens. Huvudkriteriet för att placera paket i det här filförrådet är " "att de kan göra intrång i patent och upphovsrättslagar i en del länder, t.ex " "multimedia-kodekar som behövs för att spela upp olika ljud/video-filer; " "paketen behövs för att spela upp kommersiella DVD:er, osv." #. type: Content of: <section><info><title> #: en/minimal-install.xml:1 en/minimal-install.xml:3 msgid "Minimal Install" msgstr "Minimal installation" #. type: Content of: <section><para> #: en/minimal-install.xml:17 msgid "" "Minimal Installation is intended for those with specific uses in mind for " "Mageia, such as a server or a specialised workstation. You will probably use " "this option combined with the <emphasis>Individual package selection</" "emphasis> option to fine-tune your installation. See <xref linkend=" "\"choosePackagesTree\"/>." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/minimal-install.xml:24 msgid "" "You can choose a <emphasis>Minimal Installation</emphasis> by de-selecting " "everything in the <emphasis>Package Group Selection</emphasis> screen, see " "<xref linkend=\"choosePackageGroups\"/>." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/minimal-install.xml:28 msgid "" "If desired, you can additionally tick the <emphasis>Individual package " "selection</emphasis> option in the same screen." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/minimal-install.xml:33 msgid "" "If you choose this installation method, then the relevant screen (see " "screenshot below) will offer you a few useful extras to install, such as " "documentation and <quote>X</quote>." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/minimal-install.xml:37 msgid "" "If the <emphasis>With X</emphasis> option is selected, then IceWM (a " "lightweight desktop environment) will also be included." msgstr "" #. type: Content of: <section><para> #: en/minimal-install.xml:42 msgid "" "The basic documentation is provided in the form of <quote>man</quote> and " "<quote>info</quote> pages. It contains the man pages from the <link xlink:" "href=\"http://www.tldp.org/manpages/man.html\">Linux Documentation Project</" "link> and the <link xlink:href=\"http://www.gnu.org/software/coreutils/" "manual/\">GNU coreutils</link> info pages." msgstr "" #. type: Content of: <section><mediaobject> #: en/minimal-install.xml:48 msgid "" "<imageobject> <imagedata format=\"PNG\" xml:id=\"minimal-install-im1\" align=" "\"center\" fileref=\"dx2-minimal-install.png\" revision=\"1\"/> </" "imageobject>" msgstr "" "<imageobject> <imagedata format=\"PNG\" xml:id=\"minimal-install-im1\" align=" "\"center\" fileref=\"dx2-minimal-install.png\" revision=\"1\"/> </" "imageobject>" #. type: Content of: <section><info><title> #: en/misc-params.xml:3 msgid "Configuration Summary" msgstr "" #. Lebarhon 2016 12 16 updated for Mageia 6. 20170209 updated SC #. 2018/02/09 apb: Changed title to Configuration Summary (as agreed). Also, text and typography. #. 2018/02/22 apb: Changed list styles. #. 2018/02/23 apb: Updated dx2-summaryBottom.png #. 2018/02/24 apb: Changed list style #. 2018/02/24 apb: Centre-align dx2-summaryTop.png #. type: Content of: <section><mediaobject> #: en/misc-params.xml:19 msgid "" "<imageobject> <imagedata fileref=\"dx2-summaryTop.png\" align=\"center\"/> </" "imageobject>" msgstr "" "<imageobject> <imagedata fileref=\"dx2-summaryTop.png\" align=\"center\"/> </" "imageobject>" #. type: Content of: <section><para> #: en/misc-params.xml:24 msgid "" "DrakX presents a proposal for the configuration of your system depending on " "the choices you made and on the hardware detected. You can check the " "settings here and change them if you want by pressing <emphasis>Configure</" "emphasis>." msgstr "" #. type: Content of: <section><note><para> #: en/misc-params.xml:30 msgid "" "As a general rule, it is recommended that you accept the default settings " "unless:" msgstr "" #. type: Content of: <section><note><para><itemizedlist><listitem><para> #: en/misc-params.xml:33 msgid "there are known issues with a default setting" msgstr "det finns kända problem med standardinställning" #. type: Content of: <section><note><para><itemizedlist><listitem><para> #: en/misc-params.xml:37 msgid "the default setting has already been tried and it fails" msgstr "standardinställningen har redan provats men misslyckades" #. type: Content of: <section><note><para><itemizedlist><listitem><para> #: en/misc-params.xml:41 msgid "some other factor mentioned in the detailed sections below is an issue" msgstr "" #. type: Content of: <section><section><info><title> #: en/misc-params.xml:49 msgid "System parameters" msgstr "Systemparametrar" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:54 msgid "<emphasis role=\"bold\">Timezone</emphasis>" msgstr "<emphasis role=\"bold\">Tidszon</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:56 msgid "" "DrakX selects a timezone for you, depending on your preferred language. You " "can change it if needed. See also <xref linkend=\"configureTimezoneUTC\"/>" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:62 msgid "<emphasis role=\"bold\">Country / Region</emphasis>" msgstr "<emphasis role=\"bold\">Land/Region</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:64 msgid "" "If the selected country is wrong, it is very important that you correct the " "setting. See <xref linkend=\"selectCountry\"/>" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:70 msgid "<emphasis role=\"bold\">Bootloader</emphasis>" msgstr "<emphasis role=\"bold\">Uppstartshanterare</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:72 msgid "DrakX proposal for the bootloader setting" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:75 msgid "" "Do not change anything, unless you know how to configure GRUB2. For more " "information, see <xref linkend=\"setupBootloader\"/>" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:83 msgid "<emphasis role=\"bold\">User management</emphasis>" msgstr "<emphasis role=\"bold\">Användarhantering</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:85 msgid "" "You can add extra users here. They will each be allocated their own " "<filename>/home</filename> directories." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:91 msgid "<emphasis role=\"bold\">Services</emphasis>" msgstr "<emphasis role=\"bold\">Tjänster</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:93 msgid "" "System services refer to those small programs which run in the background " "(daemons). This tool allows you to enable or disable certain processes." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:97 msgid "" "You should check carefully before changing anything here - a mistake may " "prevent your computer from operating correctly. For more information, see " "<xref linkend=\"configureServices\"/>" msgstr "" #. type: Content of: <section><section><info><title> #: en/misc-params.xml:106 msgid "Hardware parameters" msgstr "Hårdvaruparametrar" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:111 msgid "<emphasis role=\"bold\">Keyboard</emphasis>" msgstr "<emphasis role=\"bold\">Tangentbord</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:113 msgid "" "Configure your keyboard layout according to your location, language and type " "of keyboard." msgstr "" "Ställ in ditt tangentbords layout baserat på din plats, ditt språk och typ " "av tangentbord." #. type: Content of: <section><section><itemizedlist><listitem><note><para> #: en/misc-params.xml:118 msgid "" "If you notice a wrong keyboard layout and want to change it, keep in mind " "that your passwords are going to change too." msgstr "" "Tänk på att om du har en felaktig tangentbordslayout och vill ändra den så " "kommer lösenorden också att ändras." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:124 msgid "<emphasis role=\"bold\">Mouse</emphasis>" msgstr "<emphasis role=\"bold\">Mus</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:126 msgid "" "Here you can add or configure other pointing devices, tablets, trackballs " "etc." msgstr "" "Här kan du lägga till eller konfigurera andra pekdon, pekplattor, styrkulor " "etc." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:131 msgid "<emphasis role=\"bold\">Sound card</emphasis>" msgstr "<emphasis role=\"bold\">Ljudkort</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:133 msgid "The installer will use the default driver if one is available." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:136 msgid "" "If there is no actual default driver for your sound card, there may be other " "possible alternative drivers available to choose from. If this is the case, " "but you think the installer has not made the most appropriate choice, you " "can click on <emphasis>Advanced</emphasis> to manually specify a driver." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:144 msgid "<emphasis role=\"bold\">Graphical interface</emphasis>" msgstr "<emphasis role=\"bold\">Grafiskt gränssnitt</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:146 msgid "" "This section allows you to configure your graphics card(s) and displays. For " "more information, see <xref linkend=\"configureX_chooser\"/>" msgstr "" #. type: Content of: <section><section><mediaobject> #: en/misc-params.xml:155 msgid "" "<imageobject> <imagedata format=\"PNG\" xml:id=\"summaryBottom-im1\" align=" "\"center\" fileref=\"dx2-summaryBottom.png\" revision=\"1\"/> </imageobject>" msgstr "" "<imageobject> <imagedata format=\"PNG\" xml:id=\"summaryBottom-im1\" align=" "\"center\" fileref=\"dx2-summaryBottom.png\" revision=\"1\"/> </imageobject>" #. type: Content of: <section><section><info><title> #: en/misc-params.xml:163 msgid "Network and Internet parameters" msgstr "Nätverk och Internetparametrar" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:169 msgid "<emphasis role=\"bold\">Network</emphasis>" msgstr "<emphasis role=\"bold\">Nätverk</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:171 msgid "" "You can configure your network here, but for network cards with non-free " "drivers it is better to do that after reboot, using the Mageia Control " "Center, if you have not yet enabled the <emphasis>Nonfree</emphasis> media " "repositories." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><warning><para> #: en/misc-params.xml:178 msgid "" "When you add a network card, do not forget to set your firewall to monitor " "that interface as well." msgstr "" "När du lägger till ett nätverkskort, glöm inte att ställa in din brandvägg " "att även övervaka det gränssnittet också." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:185 msgid "<emphasis role=\"bold\">Proxies</emphasis>" msgstr "<emphasis role=\"bold\">Proxy-servrar</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:187 msgid "" "A Proxy Server acts as an intermediary between your computer and the wider " "Internet. This section allows you to configure your computer to utilize a " "proxy service." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:192 msgid "" "You may need to consult your systems administrator to obtain the parameters " "you need to enter here." msgstr "" #. type: Content of: <section><section><info><title> #: en/misc-params.xml:201 msgid "Security" msgstr "Säkerhet" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:206 msgid "<emphasis role=\"bold\">Security Level</emphasis>" msgstr "<emphasis role=\"bold\">Säkerhetsnivå</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:208 msgid "" "The Security level for your computer, in most cases the default setting " "(Standard) is adequate for general use. Select the option which best suits " "your usage." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:215 msgid "<emphasis role=\"bold\">Firewall</emphasis>" msgstr "<emphasis role=\"bold\">Brandvägg</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:217 msgid "" "The firewall allows you to manage which network connections are allowed on " "your computer. The safe and secure default is to allow ZERO inbound " "connections. This does not stop you connecting outbound and using your " "computer normally." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:223 msgid "" "Please be aware that the Internet is a high risk network where there are " "continuous attempts to probe and attack systems. Even seemingly <quote>safe</" "quote> connections such as ICMP (for ping) have been used as covert data " "channels for exfiltrating data by malicious persons." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:229 msgid "For more information, see <xref linkend=\"firewall\"/>." msgstr "Se <xref linkend=\"firewall\"/> för mer information." #. type: Content of: <section><section><itemizedlist><listitem><warning><para> #: en/misc-params.xml:232 msgid "" "Bear in mind that allowing <emphasis>everything</emphasis> (no firewall) may " "be very risky." msgstr "" #. type: Content of: <section><section><title> #: en/netInstall-intro.xml:4 en/SelectAndUseISOs2.xml:18 msgid "Introduction" msgstr "Presentation" #. type: Content of: <section><section><title> #: en/netInstall-intro.xml:6 #, fuzzy msgid "NetInstall Media" msgstr "Installationsmedia via nätverk" #. type: Content of: <section><section><section><title> #: en/netInstall-intro.xml:8 #, fuzzy msgid "Description" msgstr "Definition" #. type: Content of: <section><section><section><para> #: en/netInstall-intro.xml:9 msgid "These minimal ISO's contain:" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/netInstall-intro.xml:12 msgid "" "less than 120 MB and are convenient if bandwidth is too low to download a " "full DVD, or if you have a PC without a DVD drive or unable to boot from a " "USB stick." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/netInstall-intro.xml:17 msgid "" "no more than that which is needed to (a) start the <literal>DrakX</literal> " "installer and (b) find <literal>DrakX-installer-stage2</literal> and other " "packages that are needed to continue and complete the install." msgstr "" #. type: Content of: <section><section><section><para> #: en/netInstall-intro.xml:23 msgid "" "The required source packages may be on a PC hard disk, a local drive, a " "local network or on the Internet." msgstr "" #. type: Content of: <section><section><section><title> #: en/netInstall-intro.xml:27 #, fuzzy msgid "Availability" msgstr "Tillgängligt media" #. type: Content of: <section><section><section><para> #: en/netInstall-intro.xml:28 #, fuzzy msgid "There are two versions of the NetInstall media:" msgstr "Det finns tre sorters installationsmedier:" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/netInstall-intro.xml:31 msgid "" "<emphasis role=\"bold\">netinstall.iso</emphasis> For those who prefer not " "to use non-free software, this ISO contains only free software." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/netInstall-intro.xml:36 msgid "" "<emphasis role=\"bold\">netinstall-nonfree.iso</emphasis> This ISO " "additionally includes proprietary device drivers, which may be required for " "your network device, disk controller, etc." msgstr "" #. type: Content of: <section><section><section><para> #: en/netInstall-intro.xml:41 msgid "" "Both versions are available in the form of separate 32-bit and 64-bit ISO's. " "See here: <link xlink:href=\"https://www.mageia.org/downloads/\">https://www." "mageia.org/downloads/</link>" msgstr "" #. type: Content of: <section><section><section><title> #: en/netInstall-intro.xml:45 #, fuzzy msgid "Preparation" msgstr "Partitionering" #. type: Content of: <section><section><section><para> #: en/netInstall-intro.xml:46 msgid "" "After downloading the image, burn it to a CD/DVD or, if you prefer to put it " "on a USB stick, follow the instructions here: <link xlink:href=\"https://" "wiki.mageia.org/en/Installation_Media#Dump_Mageia_ISOs_on_an_USB_stick" "\">https://wiki.mageia.org/en/" "Installation_Media#Dump_Mageia_ISOs_on_an_USB_stick</link>" msgstr "" #. type: Content of: <section><section><title> #: en/netInstall-intro.xml:51 #, fuzzy msgid "Installation Stages" msgstr "Installationsstegen" #. type: Content of: <section><section><para> #: en/netInstall-intro.xml:52 #, fuzzy msgid "The installation is carried out in two stages:" msgstr "Installationsstegen" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/netInstall-intro.xml:55 msgid "" "<emphasis role=\"bold\">Stage 1</emphasis> This is the pre-Installation " "stage. You will need to provide the method and details for accessing the " "medium containing the files to be used for the installation. If the method " "involves a server, then the network connection will be activated. This " "network can be a WiFi connection with WEP or WPA2 encryption (though please " "be mindful of the Warning below regarding keyboard input)." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/netInstall-intro.xml:64 msgid "" "<emphasis role=\"bold\">Stage 2</emphasis> This is the actual Installation " "stage, which will automatically commence once a connection to the installer " "files has been established." msgstr "" #. type: Content of: <section><section><note><para> #: en/netInstall-intro.xml:70 msgid "" "During Stage 1, nothing will be written to your Hard Disk, so it is safe to " "quit at any point during Stage 1 if you wish. You can do so by pressing " "<keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>Del</keycap></" "keycombo>." msgstr "" #. type: Content of: <section><section><tip><para> #: en/netInstall-intro.xml:75 msgid "" "You can use <keycombo><keycap>Alt</keycap><keycap>F3</keycap></keycombo> to " "read the logs and <keycombo><keycap>Alt</keycap><keycap>F1</keycap></" "keycombo> to return to the installer screen." msgstr "" #. type: Content of: <section><section><warning><para> #: en/netInstall-intro.xml:78 msgid "" "Unlike when installing from DVD or LiveCD, you will be asked to type things " "during the first part of a Network installation (<emphasis role=\"bold" "\">Stage 1</emphasis>). Throughout this stage, however, your keyboard will " "operate as per an <link xlink:href=\"https://en.wikipedia.org/wiki/" "Keyboard_layout#United_States\">American keyboard</link> layout. Please bear " "this in mind to avoid confusion when entering things like names and paths " "etc." msgstr "" #. type: Content of: <section><info><title> #: en/reboot.xml:3 msgid "Reboot" msgstr "Starta om" #. type: Content of: <section><para> #: en/reboot.xml:7 msgid "" "Once the bootloader has been installed, you will be prompted to halt your " "computer, remove the live DVD/USB stick and restart the computer." msgstr "" #. type: Content of: <section><important><simpara> #: en/reboot.xml:9 msgid "" "Ensure that you follow these shut-down and restart instruction steps in the " "<emphasis role=\"bold\">same</emphasis> order." msgstr "" #. type: Content of: <section><mediaobject> #: en/reboot.xml:12 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"live-reboot2.png\"/> </" "imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"live-reboot2.png\"/> </" "imageobject>" #. type: Content of: <section><simpara> #: en/reboot.xml:16 msgid "When you are ready, press <emphasis>Finish</emphasis>." msgstr "Tryck på <emphasis>Avsluta</emphasis> när du är redo." #. type: Content of: <section><simpara> #: en/reboot.xml:17 msgid "" "When you restart, you will see a succession of download progress bars. These " "indicate that the software media lists are being downloaded (see " "<emphasis>Software Management</emphasis>)." msgstr "" #. type: Content of: <section><mediaobject> #: en/reboot.xml:19 msgid "" "<imageobject> <imagedata format=\"PNG\" xml:id=\"reboot-im1\" fileref=\"live-" "reboot.png\" align=\"center\" revision=\"1\"/> </imageobject>" msgstr "" "<imageobject> <imagedata format=\"PNG\" xml:id=\"reboot-im1\" fileref=\"live-" "reboot.png\" align=\"center\" revision=\"1\"/> </imageobject>" #. type: Content of: <section><info><title> #: en/resizeFATChoose.xml:16 msgid "" "Resize <application>Windows<superscript>®</superscript></application> " "partition" msgstr "" "Ändra storlek på <application>Windows<superscript>®</superscript></" "application>-partitionen" #. type: Content of: <section><para> #: en/resizeFATChoose.xml:20 msgid "" "You have more than one <application>Windows<superscript>®</superscript></" "application> partition. Choose which one should be made smaller to make " "space for installing <application>Mageia</application>." msgstr "" "Du har mer än en <application>Windows<superscript>®</superscript></" "application>-partition. Välj vilken som ska göras mindre för att frigöra " "utrymme så att <application>Mageia</application> kan installeras." #. type: Content of: <section><info><title> #: en/securityLevel.xml:10 msgid "Security Level" msgstr "Säkerhetsnivå" #. 2012-12-25 marja - moved this part out of misc-params.xml" #. 2013-05-05 marja - added screenshot #. 2018/02/12 apb: Minor wording. #. type: Content of: <section><mediaobject> #: en/securityLevel.xml:20 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-securityLevel.png\" " "format=\"PNG\" revision=\"1\" xml:id=\"securityLevel-im1\"/> </imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-securityLevel.png\" " "format=\"PNG\" revision=\"1\" xml:id=\"securityLevel-im1\"/> </imageobject>" #. type: Content of: <section><para> #: en/securityLevel.xml:26 msgid "" "<emphasis role=\"bold\">Please choose the desired security level</emphasis>" msgstr "" "<emphasis role=\"bold\">Vänligen välj den önskade säkerhetsnivån</emphasis>" #. type: Content of: <section><para> #: en/securityLevel.xml:29 msgid "" "<emphasis>Standard</emphasis> is the default, and recommended setting for " "the average user." msgstr "" #. type: Content of: <section><para> #: en/securityLevel.xml:32 msgid "" "<emphasis>Secure</emphasis> will create a highly protected system - for " "instance if the system is to be used as a public server." msgstr "" #. type: Content of: <section><para> #: en/securityLevel.xml:36 msgid "<emphasis role=\"bold\">Security Administrator</emphasis>" msgstr "<emphasis role=\"bold\">Säkerhetsadministratör</emphasis>" #. type: Content of: <section><para> #: en/securityLevel.xml:38 msgid "" "This item allows you to configure an email address to which the system will " "send <emphasis>security alert messages</emphasis> when it detects situations " "which require notification to a system administrator." msgstr "" #. type: Content of: <section><para> #: en/securityLevel.xml:43 msgid "" "A good, and easy-to-implement, choice is to enter <user>@localhost - " "where <user> is the login name of the user to receive these messages." msgstr "" #. type: Content of: <section><note><para> #: en/securityLevel.xml:48 msgid "" "The system sends such messages as <emphasis role=\"bold\">Unix Mailspool " "messages</emphasis>, not as \"ordinary\" SMTP mail: this user must therefore " "be configured for receiving such mail!" msgstr "" #. type: Content of: <section><para> #: en/securityLevel.xml:53 msgid "" "It will always be possible to adjust your security settings post-install in " "the <emphasis>Security</emphasis> section of the Mageia Control Center." msgstr "" #. type: Content of: <section><info><title> #: en/SelectAndUseISOs2.xml:15 msgid "Select and use ISOs" msgstr "Välj och använd ISO-filer" #. type: Content of: <section><section><para> #: en/SelectAndUseISOs2.xml:19 msgid "" "Mageia is distributed via ISO images. This page will help you to choose " "which image best suits your needs." msgstr "" "Mageia distribueras via ISO-avbilder. Den här sidan kommer att hjälpa dig " "att välja vilken avbild som bäst passar dina behov." #. type: Content of: <section><section><para> #: en/SelectAndUseISOs2.xml:21 msgid "There are three types of installation media:" msgstr "Det finns tre sorters installationsmedier:" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:24 msgid "" "<emphasis role=\"bold\">Classical installer:</emphasis> Booting with this " "media provides you with the maximum flexibility when choosing what to " "install, and for configuring your system. In particular, you have a choice " "of which Desktop environment to install." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:31 msgid "" "<emphasis role=\"bold\">LIVE media:</emphasis> This option allows you to try " "out Mageia without having to actually install it, or make any changes to " "your computer. However, the Live media also includes an Installer, which can " "be started when booting the media, or after booting into the Live operating " "system itself." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><note><para> #: en/SelectAndUseISOs2.xml:37 msgid "" "The Live Installer is simpler compared to the Classical Installer - but you " "have fewer configuration options." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><important><para> #: en/SelectAndUseISOs2.xml:41 msgid "" "Live ISOs can only be used to create <quote>clean</quote> installations, " "they cannot be used to upgrade previously installed Mageia releases." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:47 msgid "" "<emphasis role=\"bold\">Net Install</emphasis>: These are minimal ISO's " "containing no more than that which is needed to start the DrakX installer " "and find <literal>DrakX-installer-stage2</literal> and other packages that " "are needed to continue and complete the install. These packages may be on " "the PC hard disk, on a local drive, on a local network or on the Internet." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:53 msgid "" "These media are very light (less than 100 MB) and are convenient if " "bandwidth is too low to download a full DVD, or if you have a PC without a " "DVD drive or is unable to boot from a USB stick." msgstr "" #. type: Content of: <section><section><para> #: en/SelectAndUseISOs2.xml:58 msgid "More details are given in the next sections." msgstr "" #. type: Content of: <section><section><title> #: en/SelectAndUseISOs2.xml:61 msgid "Media" msgstr "Media" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:63 msgid "Definition" msgstr "Definition" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:64 msgid "" "Here, a medium (plural: media) is an ISO image file that allows you to " "install and/or update Mageia and, by extension, any physical medium (DVD, " "USB stick, ...) the ISO file is copied to." msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:67 msgid "" "You can find Mageia ISO's <link ns4:href=\"http://www.mageia.org/en/" "downloads/\">here</link>." msgstr "" "Du kan hitta ISO-filer för Mageia <link ns4:href=\"http://www.mageia.org/en/" "downloads/\">här</link>." #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:70 msgid "Classical installation media" msgstr "Klassiska installtionsmedier" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:72 en/SelectAndUseISOs2.xml:104 #: en/SelectAndUseISOs2.xml:171 msgid "Common features" msgstr "Vanliga funktioner" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:75 msgid "These ISOs use the Classical installer called DrakX" msgstr "" "De här ISO-filerna använder den klassiska installeraren som kallas DrakX" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:78 msgid "" "They are used for performing clean installs or to upgrade a previously " "installed version of Mageia" msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:82 en/SelectAndUseISOs2.xml:118 #: en/SelectAndUseISOs2.xml:174 msgid "Different media for 32 and 64-bit architectures" msgstr "Olika media för 32 och 64-bitars arkitekturer" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:85 msgid "" "Some tools are available in the Installer <quote>Welcome</quote> screen: " "<emphasis>Rescue System, Memory Test, </emphasis>and <emphasis>Hardware " "Detection Tool</emphasis>" msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:91 msgid "Each DVD contains many available desktop environments and languages" msgstr "Varje DVD innehåller många tillgängliga skrivbordsmiljöer och språk" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:95 msgid "" "You'll be given the choice during the installation to add non-free software" msgstr "" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:102 msgid "Live media" msgstr "Live media" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:107 msgid "" "Can be used to preview the Mageia operating system without having to install " "it" msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:111 msgid "The Live media also includes an Installer." msgstr "Live-mediet inkluderar också en installerare." #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:114 msgid "Each ISO contains only one desktop environment (Plasma, GNOME or Xfce)" msgstr "" "Varje ISO innehåller endast en skrivbordsmiljö (Plasma, GNOME eller Xfce)" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:121 msgid "They contain non-free software" msgstr "De innehåller icke-fri mjukvara" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:126 msgid "Live DVD Plasma" msgstr "Live DVD Plasma" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:129 msgid "Plasma desktop environment only" msgstr "Endast skrivbordsmiljön Plasma" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:132 en/SelectAndUseISOs2.xml:146 #: en/SelectAndUseISOs2.xml:160 msgid "All available languages are present" msgstr "Alla tillgängliga språk är närvarande" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:135 en/SelectAndUseISOs2.xml:149 msgid "64-bit architecture only" msgstr "endast 64-bitars arkitektur" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:140 msgid "Live DVD GNOME" msgstr "Live DVD GNOME" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:143 msgid "GNOME desktop environment only" msgstr "endast skrivbordsmiljön GNOME" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:154 msgid "Live DVD Xfce" msgstr "Live DVD Xfce" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:157 msgid "Xfce desktop environment only" msgstr "endast skrivbordsmiljön Xfce" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:163 msgid "32 or 64-bit architectures" msgstr "32 eller 64-bitars arkitekturer" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:169 msgid "Net install media" msgstr "Installationsmedia via nätverk" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:177 msgid "First steps are English language only" msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:182 msgid "netinstall.iso" msgstr "netinstall.iso" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:185 msgid "" "Contains only free software, for those who prefer to not use non-free " "software" msgstr "" "Innehåller endast fri mjukvara, för de som föredrar att inte använda icke-" "fri mjukvara" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:191 msgid "netinstall-nonfree.iso" msgstr "netinstall-nonfree.iso" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:194 msgid "" "Contains non-free software (mostly drivers, codecs...) for those who need it" msgstr "" "Innehåller icke-fri mjukvara (mestadels drivrutiner, kodekar...) för de som " "behöver det" #. type: Content of: <section><section><title> #: en/SelectAndUseISOs2.xml:202 msgid "Downloading and Checking Media" msgstr "Laddar ner och kontrollerar media" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:204 msgid "Downloading" msgstr "Hämtar" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:205 msgid "" "Once you have chosen your ISO file, you can download it using either http or " "BitTorrent. In both cases, you are provided with some information, such as " "the mirror in use and an option to switch to an alternative if the bandwidth " "is too low." msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:209 msgid "" "If http is chosen you will also see some information regarding checksums." msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:212 msgid "" "<literal>md5sum</literal>, <literal>sha1sum</literal> and " "<literal>sha512sum</literal> (the most secure) are tools to check the ISO " "integrity. Copy one of the checksums (string of alphanumeric characters) for " "use in the next section." msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/SelectAndUseISOs2.xml:217 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"Checking.png\"/> </" "imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"Checking.png\"/> </" "imageobject>" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:222 msgid "In the meantime, a window to download the actual ISO will open:" msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/SelectAndUseISOs2.xml:225 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"Download.png\"/> </" "imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"Download.png\"/> </" "imageobject>" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:229 msgid "" "Click on <emphasis>Save File</emphasis>, then click <emphasis>OK</emphasis>." msgstr "" "Klicka på <emphasis>Spara fil</emphasis>, klicka sen på <emphasis>OK</" "emphasis>." #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:233 msgid "Checking the integrity of the downloaded media" msgstr "Kontrollerar integriteten på nerladdad media" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:235 msgid "" "The checksums referred to earlier, are digital fingerprints generated by an " "algorithm from the file to be downloaded. You may compare the checksum of " "your downloaded ISO against that of the original source ISO. If the " "checksums do not match, it means that the actual data on the ISO's do not " "match, and if that is the case, then you should retry the download or " "attempt a repair using BitTorrent." msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:241 msgid "" "To generate the checksum for your downloaded ISO, open a console, (no need " "to be root), and:" msgstr "" "Öppna en konsol för att generera kontrollsumman för din nerladdade ISO " "(inget behov av att vara root), och:" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:245 msgid "" "To use the md5sum, type: <command>md5sum path/to/the/image/file.iso</command>" msgstr "" "För att använda md5-summan, skriv: <command>md5sum genvägen/till/din/avbild." "iso</command>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:249 msgid "" "To use the sha1sum, type: <command>sha1sum path/to/the/image/file.iso</" "command>" msgstr "" "För att använda sha1-summan, skriv: <command>sha1sum genväg/till/avbild.iso</" "command>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:254 msgid "" "To use the sha512sum, type: <command>sha512sum path/to/the/image/file.iso</" "command>" msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:258 msgid "Example:" msgstr "Exempel:" #. type: Content of: <section><section><section><mediaobject> #: en/SelectAndUseISOs2.xml:260 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"Md5sum.png\"/> </" "imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"Md5sum.png\"/> </" "imageobject>" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:265 msgid "" "then compare the result (you may have to wait for a while) with the ISO " "checksum provided by Mageia." msgstr "" #. type: Content of: <section><section><title> #: en/SelectAndUseISOs2.xml:270 msgid "Burn or dump the ISO" msgstr "Bränn eller dumpa ISO-filen." #. type: Content of: <section><section><para> #: en/SelectAndUseISOs2.xml:271 msgid "" "The verified ISO can now be burned to a CD/DVD or <quote>dumped</quote> to a " "USB stick. This is not a standard copy operation, as a bootable medium will " "actually be created." msgstr "" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:275 msgid "Burning the ISO to a CD/DVD" msgstr "Att bränna ISO-filen till en CD/DVD" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:276 msgid "" "Whichever software you use, ensure that the option to burn an<emphasis> " "image</emphasis> is used. Burn <emphasis>data</emphasis> or <emphasis>files</" "emphasis> is NOT correct. See the <link ns4:href=\"https://wiki.mageia.org/" "en/Writing_CD_and_DVD_images\">the Mageia wiki</link> for more information." msgstr "" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:282 msgid "Dump the ISO to a USB stick" msgstr "Dumpa ISOn till ett USB-minne" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:283 msgid "" "All Mageia ISOs are hybrids, which means you can dump them to a USB stick " "and then use that to boot and install the system." msgstr "" #. type: Content of: <section><section><section><warning><para> #: en/SelectAndUseISOs2.xml:286 msgid "" "Dumping an image onto a flash device destroys any previous file-system on " "the device and all existing data will be lost." msgstr "" #. type: Content of: <section><section><section><note><para> #: en/SelectAndUseISOs2.xml:290 msgid "" "Also, the only partition on the flash device will then just be the Mageia " "ISO partition." msgstr "" #. type: Content of: <section><section><section><note><para> #: en/SelectAndUseISOs2.xml:292 msgid "" "So, if an ISO of about 4GB is written to an 8GB USB stick, the stick will " "then only show up as 4GB. This is because the remaining 4GB is no longer " "formatted - hence not currently available for use. To recover the original " "capacity, you must reformat and repartition the USB stick." msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:299 msgid "Using a graphical tool within Mageia" msgstr "Använda ett grafiskt verktyg i Mageia" #. type: Content of: <section><section><section><section><para> #: en/SelectAndUseISOs2.xml:300 msgid "" "You can use a graphical tool like <link ns4:href=\"https://wiki.mageia.org/" "en/IsoDumper_Writing_ISO_images_on_USB_sticks\">IsoDumper</link>" msgstr "" "Du kan använda ett grafiskt verktyg som t. ex. <link ns4:href=\"https://wiki." "mageia.org/en/IsoDumper_Writing_ISO_images_on_USB_sticks\">IsoDumper</link>" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:303 msgid "Using a graphical tool within Windows" msgstr "Använda ett grafiskt verktyg i Windows" #. type: Content of: <section><section><section><section><para> #: en/SelectAndUseISOs2.xml:304 msgid "You could try:" msgstr "Du kan prova:" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:307 msgid "" "<link ns4:href=\"http://rufus.akeo.ie/?locale=en_US\">Rufus</link> using the " "\"ISO image\" option" msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:311 msgid "" "<link ns4:href=\"http://sourceforge.net/projects/win32diskimager\">Win32 " "Disk Imager</link>" msgstr "" "<link ns4:href=\"http://sourceforge.net/projects/win32diskimager\">Win32-" "diskavbildaren</link>" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:317 msgid "Using the Command line within a GNU/Linux system" msgstr "" #. type: Content of: <section><section><section><section><warning><para> #: en/SelectAndUseISOs2.xml:319 msgid "" "It is potentially *dangerous* to do this by hand. You risk overwriting " "potentially valuable existing data if you specify the wrong target device." msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:325 msgid "Open a console" msgstr "Öppna en konsol" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:328 msgid "" "Become a <emphasis>root</emphasis> (Administrator) user with the command " "<command>su -</command> (don't forget the <command>-</command> )" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><mediaobject> #: en/SelectAndUseISOs2.xml:332 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"Root.png\"/> </" "imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"Root.png\"/> </" "imageobject>" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:338 msgid "" "Plug in your USB stick - but do not mount it (this also means do not open " "any application or file manager that could access or read it)" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:343 msgid "Enter the command <command>fdisk -l</command>" msgstr "Skriv kommandot <command>fdisk -l</command>" #. type: Content of: <section><section><section><section><orderedlist><listitem><mediaobject> #: en/SelectAndUseISOs2.xml:345 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"Fdisk.png\"/> </" "imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"Fdisk.png\"/> </" "imageobject>" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:351 msgid "" "Find the device name for your USB stick (by its size), for example " "<filename>/dev/sdb</filename> in the screenshot above, is an 8GB USB stick." msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:354 msgid "" "Alternatively, you can find the device name with the command <command>dmesg</" "command>. Towards the end of the following example, you can see the device " "name starting with <filename>sd</filename>, and in this case, <filename>sdd</" "filename> is the actual device. You can also see that its size is 2GB:" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para><screen> #: en/SelectAndUseISOs2.xml:360 #, no-wrap msgid "" "[72594.604531] usb 1-1: new high-speed USB device number 27 using xhci_hcd\n" "[72594.770528] usb 1-1: New USB device found, idVendor=8564, idProduct=1000\n" "[72594.770533] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3\n" "[72594.770536] usb 1-1: Product: Mass Storage Device\n" "[72594.770537] usb 1-1: Manufacturer: JetFlash\n" "[72594.770539] usb 1-1: SerialNumber: 18MJTWLMPUCC3SSB\n" "[72594.770713] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes\n" "[72594.770719] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes\n" "[72594.771122] usb-storage 1-1:1.0: USB Mass Storage device detected\n" "[72594.772447] scsi host8: usb-storage 1-1:1.0\n" "[72595.963238] scsi 8:0:0:0: Direct-Access JetFlash Transcend 2GB 1100 PQ: 0 ANSI: 4\n" "[72595.963626] sd 8:0:0:0: [sdd] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)\n" "[72595.964104] sd 8:0:0:0: [sdd] Write Protect is off\n" "[72595.964108] sd 8:0:0:0: [sdd] Mode Sense: 43 00 00 00\n" "[72595.965025] sd 8:0:0:0: [sdd] No Caching mode page found\n" "[72595.965031] sd 8:0:0:0: [sdd] Assuming drive cache: write through\n" "[72595.967251] <emphasis>sdd</emphasis>: sdd1\n" "[72595.969446] sd 8:0:0:0: [sdd] Attached SCSI removable disk" msgstr "" "[72594.604531] usb 1-1: new high-speed USB device number 27 using xhci_hcd\n" "[72594.770528] usb 1-1: New USB device found, idVendor=8564, idProduct=1000\n" "[72594.770533] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3\n" "[72594.770536] usb 1-1: Product: Mass Storage Device\n" "[72594.770537] usb 1-1: Manufacturer: JetFlash\n" "[72594.770539] usb 1-1: SerialNumber: 18MJTWLMPUCC3SSB\n" "[72594.770713] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes\n" "[72594.770719] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes\n" "[72594.771122] usb-storage 1-1:1.0: USB Mass Storage device detected\n" "[72594.772447] scsi host8: usb-storage 1-1:1.0\n" "[72595.963238] scsi 8:0:0:0: Direct-Access JetFlash Transcend 2GB 1100 PQ: 0 ANSI: 4\n" "[72595.963626] sd 8:0:0:0: [sdd] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)\n" "[72595.964104] sd 8:0:0:0: [sdd] Write Protect is off\n" "[72595.964108] sd 8:0:0:0: [sdd] Mode Sense: 43 00 00 00\n" "[72595.965025] sd 8:0:0:0: [sdd] No Caching mode page found\n" "[72595.965031] sd 8:0:0:0: [sdd] Assuming drive cache: write through\n" "[72595.967251] <emphasis>sdd</emphasis>: sdd1\n" "[72595.969446] sd 8:0:0:0: [sdd] Attached SCSI removable disk" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:360 msgid "<placeholder type=\"screen\" id=\"0\"/>" msgstr "<placeholder type=\"screen\" id=\"0\"/>" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:380 msgid "" "Enter the command: <command>dd if=path/to/the/ISO/file of=/dev/" "sd<replaceable>X</replaceable> bs=1M</command>" msgstr "" "Skriv kommandot: <command>dd if=genväg/till/ISO of=/dev/sd<replaceable>X</" "replaceable> bs=1M</command>" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:382 msgid "" "Where <replaceable>X</replaceable>=your device name eg: <filename>/dev/sdd</" "filename>" msgstr "" "Där <replaceable>X</replaceable>=namnet på din enhet t.ex: <filename>/dev/" "sdd</filename>" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:384 msgid "" "Example:<literal> dd if=/home/user/Downloads/Mageia-6-x86_64-DVD.iso of=/dev/" "sdd bs=1M</literal>" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><tip><para> #: en/SelectAndUseISOs2.xml:388 msgid "" "It might be helpful to know that <emphasis role=\"bold\">if</emphasis> " "stands for <emphasis role=\"bold\">i</emphasis>nput <emphasis role=\"bold" "\">f</emphasis>ile and <emphasis role=\"bold\">of</emphasis> stands for " "<emphasis role=\"bold\">o</emphasis>utput <emphasis role=\"bold\">f</" "emphasis>ile" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:392 msgid "Enter the command: <command>sync</command>" msgstr "Skriv kommandot: <command>sync</command>" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:395 msgid "This is the end of the process, and you may now unplug your USB stick." msgstr "Det här är slutet av processen, och du kan nu dra ut din USB-sticka." #. type: Attribute 'xreflabel' of: <section> #: en/selectCountry.xml:1 #, fuzzy msgid "Select Country" msgstr "Välj mus" #. type: Content of: <section><info><title> #: en/selectCountry.xml:3 msgid "Select your Country / Region" msgstr "Välj ditt land / region" #. Lebarhon 2016 12 16 updated for Mageia 6 #. 2018/02/13 apb: Minor wording + typography. #. 2018/02/25 apb: a) add xreflabel to this section. b) make some text bulleted. #. type: Content of: <section><mediaobject> #: en/selectCountry.xml:13 msgid "" "<imageobject> <imagedata format=\"PNG\" xml:id=\"selectCountry-im1\" align=" "\"center\" fileref=\"dx2-selectCountry.png\" revision=\"1\"/> </imageobject>" msgstr "" "<imageobject> <imagedata format=\"PNG\" xml:id=\"selectCountry-im1\" align=" "\"center\" fileref=\"dx2-selectCountry.png\" revision=\"1\"/> </imageobject>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectCountry.xml:20 msgid "" "Select your country or region. This is important for all kinds of settings, " "like the currency and wireless regulatory domain. Setting the wrong country " "can lead to being unable to use a Wireless network." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectCountry.xml:27 msgid "" "If your country isn't in the list, click the <emphasis>Other Countries</" "emphasis> option and choose your country / region there." msgstr "" #. type: Content of: <section><note><para> #: en/selectCountry.xml:34 msgid "" "If your country is only in the <emphasis>Other Countries</emphasis> list, " "after clicking <emphasis>OK</emphasis> it may seem that a country from the " "main list was chosen. Despite this, DrakX will actually apply your choice." msgstr "" #. type: Content of: <section><section><info><title> #: en/selectCountry.xml:42 msgid "Input method" msgstr "Inmatningsmetod" #. type: Content of: <section><section><para> #: en/selectCountry.xml:45 msgid "" "In the <emphasis>Other Countries</emphasis> screen you can also select an " "input method (at the bottom of the list). Input methods allow users to input " "multilingual characters (Chinese, Japanese, Korean, etc). IBus is the " "default input method, so users should not need to configure it manually. " "Other input methods (SCIM, GCIN, HIME, etc) also provide similar functions " "and can be installed if you added HTTP/FTP media before package selection." msgstr "" #. type: Content of: <section><section><note><para> #: en/selectCountry.xml:54 msgid "" "If you missed the input method setup during installation, you can access it " "post-install via <menuchoice> <guimenu>Configure your Computer</guimenu> " "<guimenuitem>System</guimenuitem> </menuchoice>, or by running " "<command>localedrake</command> as <emphasis>root</emphasis>." msgstr "" #. type: Content of: <section><info><title> #: en/selectInstallClass.xml:29 msgid "Install or Upgrade" msgstr "Installation eller uppgradering" #. type: Content of: <section><mediaobject> #: en/selectInstallClass.xml:33 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectInstallClass." "png\" format=\"PNG\"/> </imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectInstallClass." "png\" format=\"PNG\"/> </imageobject>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:41 msgid "<emphasis role=\"bold\">Install</emphasis>" msgstr "<emphasis role=\"bold\">Installation</emphasis>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:43 msgid "" "Use this option to perform a fresh installation of Mageia. This will format " "the <literal>root</literal> partition (<filename>/</filename>), but can " "preserve a pre-existing <filename>/home</filename> partition (a dedicated /" "home partition, rather than being incorporated within the root (/) partition " "itself)." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:50 msgid "<emphasis role=\"bold\">Upgrade</emphasis>" msgstr "<emphasis role=\"bold\">Uppgradering</emphasis>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:52 msgid "Use this option to upgrade an existing installation of Mageia." msgstr "" "Använd det här alternativet för att uppgradera en befintlig installation av " "Mageia." #. type: Content of: <section><important><para> #: en/selectInstallClass.xml:58 msgid "" "Only upgrading from a previous Mageia version that was <emphasis>still " "supported</emphasis> when this Installer's version was released, has been " "thoroughly tested. If you want to upgrade a Mageia version that has reached " "its <quote>End Of Life</quote> then it is better to do a <quote>clean</" "quote> install instead, while preserving your <filename>/home</filename> " "partition." msgstr "" #. type: Content of: <section><tip><para> #: en/selectInstallClass.xml:67 msgid "" "If you have discovered that you forgot to select an additional language, you " "can return from the <emphasis>Install or Upgrade</emphasis> screen to the " "language choice screen by pressing <keycombo> <keycap>Ctrl</keycap> " "<keycap>Alt</keycap> <keycap>Home</keycap> </keycombo>. Do<emphasis role=" "\"bold\"> NOT</emphasis> do this later in the install." msgstr "" #. type: Content of: <section><info><title> #: en/selectKeyboardLive.xml:14 msgid "Select Keyboard" msgstr "Välj tangentbord" #. type: Content of: <section><mediaobject> #: en/selectKeyboardLive.xml:18 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"live-selectKeyboard.png" "\" format=\"PNG\" revision=\"1\" xml:id=\"selectKeyboardLive-im1\"/> </" "imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"live-selectKeyboard.png" "\" format=\"PNG\" revision=\"1\" xml:id=\"selectKeyboardLive-im1\"/> </" "imageobject>" #. type: Content of: <section><para> #: en/selectKeyboardLive.xml:24 msgid "Here you can set the keyboard layout you wish to use with Mageia​​." msgstr "" #. type: Content of: <section><para> #: en/selectKeyboardLive.xml:27 msgid "" "A suggested keyboard layout (highlighted), has been chosen for you based " "upon your previously selected language and timezone choices." msgstr "" #. type: Content of: <section><info><title> #: en/selectKeyboard.xml:20 msgid "Keyboard" msgstr "Tangentbord" #. type: Content of: <section><para> #: en/selectKeyboard.xml:23 msgid "" "DrakX selects an appropriate keyboard for your language. If no suitable " "keyboard is found it will default to a US keyboard layout." msgstr "" "DrakX väljer ett passande tangentbord för ditt språk. Om inget hittas så " "väljer den ett tangentbord med amerikansk layout." #. type: Content of: <section><mediaobject> #: en/selectKeyboard.xml:28 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png\"/" "> </imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png\"/" "> </imageobject>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectKeyboard.xml:35 msgid "" "Make sure that the selection is correct or choose another keyboard layout. " "If you don't know which layout your keyboard has, look in the specifications " "that came with your system, or ask the computer vendor. There may even be a " "label on the keyboard that identifies the layout. You can also look here: " "<link xlink:href=\"http://en.wikipedia.org/wiki/Keyboard_layout\">en." "wikipedia.org/wiki/Keyboard_layout</link>" msgstr "" "Försäkra dig om att valet är korrekt eller välj en annan tangenbordslayout. " "Om du inte vet vilken layout ditt tangentbord har, kontrollera " "specifikationen som följde med ditt system eller kontakta en " "datorleverantör. Det kan även finnas en etikett på tangentbordet som talar " "om vilken layout det har. Du kan även ta en titt här: <link xlink:href=" "\"http://en.wikipedia.org/wiki/Keyboard_layout\">en.wikipedia.org/wiki/" "Keyboard_layout</link>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectKeyboard.xml:45 msgid "" "If your keyboard isn't in the list shown, click on <emphasis>More</emphasis> " "to get a fuller list, and select your keyboard there." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para><note><para> #: en/selectKeyboard.xml:50 msgid "" "After choosing a keyboard from the <emphasis>More</emphasis> dialogue, " "you'll return to the first keyboard choice dialogue and it will seem as " "though a keyboard from that screen was chosen. You can safely ignore this " "and continue the installation: the keyboard chosen from the full list will " "be applied." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectKeyboard.xml:60 msgid "" "If you choose a keyboard based on non-Latin characters, you will see an " "extra dialogue screen asking how you would prefer to switch between the " "Latin and non-Latin keyboard layouts" msgstr "" #. type: Content of: <section><info><title> #: en/selectLanguage.xml:34 msgid "Please choose a language to use" msgstr "Välj språk" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:39 msgid "" "Select your preferred language, by first expanding the list for your " "continent. Mageia will use this selection during the installation and for " "your installed system." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:45 msgid "" "Select your preferred language. Mageia will use this selection during the " "installation and for your installed system." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:50 msgid "" "If it is likely that you (or others) will require several languages to be " "installed on your system, then you should use the <emphasis>Multiple " "languages</emphasis> option to add them now. It will be difficult to add " "extra language support after installation." msgstr "" #. type: Content of: <section><mediaobject> #: en/selectLanguage.xml:58 msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-selectLanguage.png\" format=\"PNG\"/> </imageobject> <imageobject " "condition=\"live\"> <imagedata align=\"center\" fileref=\"live-language.png" "\" format=\"PNG\"/> </imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-selectLanguage.png\" format=\"PNG\"/> </imageobject> <imageobject " "condition=\"live\"> <imagedata align=\"center\" fileref=\"live-language.png" "\" format=\"PNG\"/> </imageobject>" #. type: Content of: <section><important><para> #: en/selectLanguage.xml:68 msgid "" "Even if you choose more than one language, you must first choose one as your " "preferred language from the main list of languages. It will also be marked " "as chosen in the <emphasis>Multiple languages</emphasis> screen." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:76 msgid "" "If your keyboard language is not the same as your preferred language, then " "it is advisable to install the required language for your keyboard as well" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:82 msgid "" "Mageia uses UTF-8 (Unicode) support by default. This may be disabled in the " "<emphasis>Multiple languages</emphasis> screen if you know that it is " "inappropriate for your language. Disabling UTF-8 applies to all installed " "languages." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:89 msgid "" "You can change the language for your system post-installation in the " "<menuchoice> <guimenu>Mageia Control Center</guimenu> <guimenuitem>System</" "guimenuitem> <guimenuitem>localization for your system</guimenuitem> </" "menuchoice>." msgstr "" #. type: Content of: <section><info><title> #: en/selectMouse.xml:10 msgid "Select mouse" msgstr "Välj mus" #. Made by marja on 2012 04 11 #. NEEDS TO BE REVIEWED! #. adding some "real" text now that we know the page shows up in the right place #. marja 2012-04-24 adding screenshot #. 2018/02/15 apb: Text and typography. #. type: Content of: <section><mediaobject> #: en/selectMouse.xml:24 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectMouse.png\" " "format=\"PNG\"/> </imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectMouse.png\" " "format=\"PNG\"/> </imageobject>" #. type: Content of: <section><para> #: en/selectMouse.xml:29 msgid "" "If you are not happy with how your mouse responds, you can select a " "different one here." msgstr "" "Om du inte är nöjd med hur din mus svarar så kan du välja en annan här." #. type: Content of: <section><para> #: en/selectMouse.xml:32 msgid "" "Usually, <menuchoice> <guimenu>Universal</guimenu> <guimenuitem>Any PS/2 and " "USB mice</guimenuitem> </menuchoice> is a good choice." msgstr "" #. type: Content of: <section><para> #: en/selectMouse.xml:38 msgid "" "Select <menuchoice> <guimenu>Universal</guimenu> <guimenuitem>Force evdev</" "guimenuitem> </menuchoice> to configure the buttons that do not work on a " "mouse with six or more buttons." msgstr "" #. type: Content of: <section><info><title> #: en/setupBootloaderAddEntry.xml:7 msgid "Add or Modify a Boot Menu Entry" msgstr "Lägg till eller ändra en post i bootmenyn" #. type: Content of: <section><para> #: en/setupBootloaderAddEntry.xml:11 msgid "" "To do this you need to manually edit /boot/grub2/custom.cfg or use the " "software <emphasis role=\"bold\">grub-customizer</emphasis> tool instead " "(available in the Mageia repositories)." msgstr "" #. type: Content of: <section><note><para> #: en/setupBootloaderAddEntry.xml:16 msgid "" "For more information, see: <link ns2:href=\"https://wiki.mageia.org/en/Grub2-" "efi_and_Mageia\">https://wiki.mageia.org/en/Grub2-efi_and_Mageia</link>" msgstr "" #. type: Content of: <section><info><title> #: en/setupBootloader.xml:1 en/setupBootloader.xml:15 msgid "Bootloader" msgstr "Starthanterare" #. type: Content of: <section><section><title> #: en/setupBootloader.xml:18 msgid "Available Bootloaders" msgstr "" #. type: Content of: <section><section><section><title> #: en/setupBootloader.xml:20 msgid "Grub2" msgstr "Grub2" #. type: Content of: <section><section><section><itemizedlist><para> #: en/setupBootloader.xml:22 msgid "<emphasis role=\"bold\">Grub2 on Legacy MBR/GPT systems</emphasis>" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:25 msgid "" "GRUB2 (with or without graphical menu) will be used exclusively as the " "bootloader for a Legacy/MBR or Legacy/GPT system." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:30 msgid "" "By default, a new bootloader will be written into either the MBR (Master " "Boot Record) of your first hard drive or in the BIOS boot partition." msgstr "" #. type: Content of: <section><section><section><itemizedlist><para> #: en/setupBootloader.xml:36 msgid "<emphasis role=\"bold\">Grub2-efi on UEFI systems</emphasis>" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:39 msgid "GRUB2-efi or rEFInd may be used as the bootloader for a UEFI system." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:43 msgid "" "By default, a new bootloader (Grub2-efi) will be written into the ESP (EFI " "System Partition)." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:45 msgid "" "If there are already UEFI-based operating systems installed on your computer " "(Windows 8 for example), the Mageia installer will detect the existing ESP " "created by Windows and add grub2-efi to it. If no ESP exists, then one will " "be created. Although it is possible to have several ESPs, only one is " "required, whatever the number of operating systems you have." msgstr "" #. type: Content of: <section><section><section><title> #: en/setupBootloader.xml:55 msgid "rEFInd" msgstr "" #. type: Content of: <section><section><section><itemizedlist><para> #: en/setupBootloader.xml:57 msgid "<emphasis role=\"bold\">rEFInd on UEFI systems</emphasis>" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:59 msgid "" "rEFInd has a nice graphical set of options, and can auto-detect installed " "EFI bootloaders. See: http://www.rodsbooks.com/refind/" msgstr "" #. type: Content of: <section><section><section><note><para> #: en/setupBootloader.xml:65 msgid "" "Please note that in order to be able to use the <literal>rEFInd</literal> " "option, an installed EFI System Partition must match your system " "architecture: if you have a 32bit EFI System Partition installed on a 64bit " "machine for instance, then the rEFInd option will not be displayed/available " "to you." msgstr "" #. type: Content of: <section><section><info><title> #: en/setupBootloader.xml:75 msgid "Bootloader Setup" msgstr "" #. type: Content of: <section><section><section><title> #: en/setupBootloader.xml:78 msgid "Bootloader main options" msgstr "Huvudalternativ för startshanteraren" #. type: Content of: <section><section><section><mediaobject> #: en/setupBootloader.xml:80 msgid "" "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" "setupBootloader.png\" align=\"center\"/> </imageobject> <imageobject " "condition=\"live\"> <imagedata xml:id=\"setupBootloader-im1\" fileref=\"live-" "setupBootloader.png\"/> </imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" "setupBootloader.png\" align=\"center\"/> </imageobject> <imageobject " "condition=\"live\"> <imagedata xml:id=\"setupBootloader-im1\" fileref=\"live-" "setupBootloader.png\"/> </imageobject>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:89 msgid "<emphasis role=\"bold\">Bootloader to use</emphasis>" msgstr "<emphasis role=\"bold\">Uppstartshanterare att använda</emphasis>" #. type: Content of: <section><section><section><itemizedlist><listitem><itemizedlist><listitem><para> #: en/setupBootloader.xml:92 msgid "" "<guimenuitem>GRUB2</guimenuitem> (with either a graphical or a text menu), " "can be chosen for both <literal>Legacy MBR/BIOS</literal> systems and " "<literal>UEFI</literal> systems." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><itemizedlist><listitem><para> #: en/setupBootloader.xml:98 msgid "" "<guimenuitem>rEFInd</guimenuitem> (with a graphical menu) is an alternative " "option solely for use with <literal>UEFI</literal> systems." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:105 msgid "<emphasis role=\"bold\">Boot device</emphasis>" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><warning><para> #: en/setupBootloader.xml:107 msgid "Don't change this unless you really know what you are doing." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><note><para> #: en/setupBootloader.xml:111 msgid "" "There is no option to write GRUB to the boot sector of a partition (e.g: " "<filename>sda1</filename>), as this method is considered unreliable." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:115 msgid "" "When using UEFI mode, then the <guilabel>Boot device</guilabel> will be " "listed as <guimenuitem>EFI System Partition</guimenuitem>." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:120 msgid "" "<emphasis role=\"bold\">Delay before booting the default image</emphasis>" msgstr "" "<emphasis role=\"bold\">Fördröj innan standard-avbilden startas</emphasis>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:122 msgid "" "This text box lets you set a delay, in seconds, before the default operating " "system is started up." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:126 msgid "<emphasis role=\"bold\">Security</emphasis>" msgstr "<emphasis role=\"bold\">Säkerhet</emphasis>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:127 msgid "" "This allows you to set a password for the bootloader. This means a username " "and password will be required when booting in order to select a booting " "entry or change settings. This is optional, and most people are not likely " "to have a need for it. The username is <literal>root</literal> and the " "password is the one chosen hereafter." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:136 msgid "Choose a password for the bootloader (optional)" msgstr "Välj ett lösenord för uppstartshanteraren (valfritt)" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:139 msgid "<emphasis role=\"bold\">Password (again)</emphasis>" msgstr "<emphasis role=\"bold\">Lösenordet (igen)</emphasis>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:140 msgid "" "Retype the password and DrakX will check that it matches with the one set " "above" msgstr "" #. type: Content of: <section><section><section><para> #: en/setupBootloader.xml:144 en/setupBootloader.xml:250 msgid "<emphasis>Advanced</emphasis>" msgstr "<emphasis>Avancerad</emphasis>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:147 msgid "<emphasis>Enable ACPI</emphasis>" msgstr "<emphasis>Aktivera ACPI</emphasis>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:148 msgid "" "ACPI (Advanced Configuration and Power Interface) is a standard for power " "management. It can save energy by stopping unused devices. Deselecting it " "could be useful if, for example, your computer does not support ACPI or if " "you think the ACPI implementation might cause some problems (for instance " "random reboots or system lockups)." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:156 msgid "<emphasis>Enable SMP</emphasis>" msgstr "<emphasis>Aktivera SMP</emphasis>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:157 msgid "" "This option enables/disables symmetric multiprocessing for multi-core " "processors" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:161 msgid "<emphasis>Enable APIC</emphasis>" msgstr "<emphasis>Aktivera APIC</emphasis>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:162 msgid "" "Enabling this gives the operating system access to the Advanced Programmable " "Interrupt Controller. APIC devices permit more complex priority models, and " "Advanced IRQ (Interrupt Request) management." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:168 msgid "<emphasis>Enable Local APIC</emphasis>" msgstr "<emphasis>Aktivera Lokal APIC</emphasis>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:169 msgid "" "Here you can set Local APIC, which manages all external interrupts for a " "specific processor in an SMP system" msgstr "" #. type: Content of: <section><section><section><title> #: en/setupBootloader.xml:175 msgid "Bootloader Configuration" msgstr "Konfiguration av starthanterare" #. type: Content of: <section><section><section><para> #: en/setupBootloader.xml:176 msgid "" "If, in the previous section you selected <literal>rEFInd</literal> as the " "bootloader to use, you would then be presented with the options shown in the " "screenshot directly below. Otherwise, please instead move on to the " "subsequent screenshot for your options." msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/setupBootloader.xml:181 msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"rEFIndLoaderConfig.png\"/> </imageobject> <imageobject condition=\"live\"> " "<imagedata align=\"center\" fileref=\"live-rEFIndLoaderConfig.png\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><section><section><para> #: en/setupBootloader.xml:188 msgid "Your rEFInd configuration options:" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:191 msgid "" "<emphasis role=\"bold\">Install or update rEFInd in the EFI system partition." "</emphasis>" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:195 msgid "<emphasis role=\"bold\">Install in /EFI/BOOT.</emphasis>" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:196 en/setupBootloader.xml:239 msgid "" "This option installs the bootloader in the /EFI/BOOT directory of the ESP " "(EFI System Partition). This can be useful when:" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:198 en/setupBootloader.xml:241 msgid "" "(a) Installing onto a removable drive (e.g. a USB stick) that can be removed " "and plugged into a different machine. If the bootloader is stored in /EFI/" "BOOT, UEFI BIOS's will detect it and allow you to boot from that drive." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:202 en/setupBootloader.xml:245 msgid "" "(b) As a workaround where, due to a buggy UEFI BIOS, the newly written " "bootloader for Mageia will not be recognized at end of the installation." msgstr "" #. type: Content of: <section><section><section><para> #: en/setupBootloader.xml:207 msgid "" "If you did not select rEFInd as the bootloader to use in the previous " "section, then your bootloader configuration options are shown below:" msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/setupBootloader.xml:211 msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-setupBootloader3.png\"/> </imageobject> <imageobject condition=\"live" "\"> <imagedata fileref=\"live-setupBootloader3.png\" align=\"center\"/> </" "imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-setupBootloader3.png\"/> </imageobject> <imageobject condition=\"live" "\"> <imagedata fileref=\"live-setupBootloader3.png\" align=\"center\"/> </" "imageobject>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:220 msgid "<emphasis role=\"bold\">Default</emphasis>" msgstr "<emphasis role=\"bold\">Standard</emphasis>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:221 msgid "The operating system to be started up by default." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:224 msgid "<emphasis role=\"bold\">Append</emphasis>" msgstr "<emphasis role=\"bold\">Fäst</emphasis>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:225 msgid "" "This option lets you pass information to the kernel or tell the kernel to " "give you more information as it boots." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:229 msgid "<emphasis role=\"bold\">Probe foreign OS</emphasis>" msgstr "<emphasis role=\"bold\">Undersök främmande OS</emphasis>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:230 msgid "" "If you already have other operating systems installed, Mageia attempts to " "add them to your new Mageia boot menu. If you don't want this behaviour, " "then untick the <guimenuitem>Probe Foreign OS</guimenuitem> option." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:236 msgid "" "<emphasis role=\"bold\">Install in /EFI/BOOT. </emphasis>(Note: this menu " "option only becomes available where the installer detects that a machine is " "in UEFI mode)." msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/setupBootloader.xml:252 msgid "" "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" "setupBootloader4.png\" align=\"center\"/> </imageobject> <imageobject " "condition=\"live\"> <imagedata fileref=\"live-setupBootloader4.png\" align=" "\"center\"/> </imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" "setupBootloader4.png\" align=\"center\"/> </imageobject> <imageobject " "condition=\"live\"> <imagedata fileref=\"live-setupBootloader4.png\" align=" "\"center\"/> </imageobject>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:261 msgid "<emphasis>Video mode</emphasis>" msgstr "<emphasis>Grafikläge</emphasis>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:262 msgid "" "This sets the screen size and colour depth to be used by the boot menu. If " "you click the down-triangle you will be offered other size and colour depth " "options." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:267 msgid "<emphasis>Do not touch ESP or MBR</emphasis>" msgstr "<emphasis>Rör inte ESP eller MBR</emphasis>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:268 msgid "" "Select this option if you don't want a bootable Mageia, but would rather " "chain-load it from another OS. You will get a warning that the bootloader is " "missing. Click <guimenuitem>Ok </guimenuitem>only if you are sure you " "understand the implications, and wish to proceed." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><warning><para> #: en/setupBootloader.xml:274 msgid "" "Chain-loading via legacy bootloaders (GRUB Legacy and LiLo) is no longer " "supported by Mageia as it is likely to fail when attempting to boot this " "resulting installation of Mageia. If you use anything other than GRUB2 or " "rEFInd for this purpose, then you do so at your own risk!" msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/setupBootloader.xml:283 msgid "" "<imageobject> <imagedata fileref=\"live-setupBootloader5.png\" align=\"center" "\"/> </imageobject>" msgstr "" #. type: Content of: <section><section><title> #: en/setupBootloader.xml:290 msgid "Other Options" msgstr "Fler alternativ" #. type: Content of: <section><section><section><title> #: en/setupBootloader.xml:292 msgid "Using an existing bootloader" msgstr "Använder en befintlig startshanterare" #. type: Content of: <section><section><section><para> #: en/setupBootloader.xml:293 msgid "" "The exact procedure for adding Mageia to an existing bootloader is beyond " "the scope of this documentation. However, in most cases it will involve " "running the relevant bootloader installation program, which should detect " "Mageia and automatically add an entry for it in the bootloader menu. See the " "documentation for the relevant operating system." msgstr "" #. type: Content of: <section><section><section><title> #: en/setupBootloader.xml:296 msgid "Installing Without a Bootloader" msgstr "Installera utan en uppstartshanterare" #. type: Content of: <section><section><section><para> #: en/setupBootloader.xml:297 msgid "" "While you can opt to install Mageia without a bootloader (see section 2.1 " "Advanced), this is not recommended unless you absolutely know what you are " "doing, as without some form of bootloader your operating system will be " "unable to start." msgstr "" #. type: Content of: <section><info><title> #: en/setupSCSI.xml:10 msgid "Setup SCSI" msgstr "Ställ in SCSI" #. Made by marja on 2012 04 02 #. NEEDS TO BE REVIEWED! #. JohnR - edited 2012-03-03 #. SimonNZG has reviewed 2012-04-03 (changed editted to edited in JohnR's comment ;-) #. barjac has re-reviewed and made some minor tweaks. Revisions incremented. #. marja 2012-04-24 added screenshot #. marja 2012-04-25 replacing John's version 1.6 because that one was based on the #. Mdv doc instead of on our setupSCSI file #. 2018/02/15 apb: Text and typography. #. 2018/0217 apb: Merge 2nd/3rd paras and reword. #. type: Content of: <section><mediaobject> #: en/setupSCSI.xml:33 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-setupSCSI.png\" " "format=\"PNG\" revision=\"1\" xml:id=\"setupSCSI-im1\"/> </imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-setupSCSI.png\" " "format=\"PNG\" revision=\"1\" xml:id=\"setupSCSI-im1\"/> </imageobject>" #. type: Content of: <section><para> #: en/setupSCSI.xml:39 msgid "" "DrakX will normally detect hard disks correctly. However, with some older " "SCSI controllers it may be unable to determine the correct drivers to use " "and subsequently fail to recognise the drive." msgstr "" #. type: Content of: <section><para> #: en/setupSCSI.xml:44 msgid "" "If your device is not recognised, you will need to manually tell DrakX which " "SCSI drive(s) you have. DrakX should then be able to configure the drive(s) " "correctly." msgstr "" #. type: Content of: <section><title> #: en/software.xml:1 en/software.xml:4 msgid "Software" msgstr "Mjukvara" #. type: Content of: <section><section><title> #: en/software.xml:7 msgid "Media Selection" msgstr "Val av media" #. type: Content of: <section><info><title> #: en/soundConfig.xml:3 msgid "Sound Configuration" msgstr "Ljudkonfiguration" #. Lebarhon 20170209 updated SC #. type: Content of: <section><mediaobject> #: en/soundConfig.xml:7 #, fuzzy msgid "" "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-soundConfig.png\" xml:" "id=\"soundConfig-im1\" revision=\"1\"/> </imageobject>" msgstr "" "<imageobject><imagedata format=\"PNG\" fileref=\"dx2-configureServices.png\" " "xml:id=\"configureServices-im1\" align=\"center\" revision=\"1\"/></" "imageobject>" #. type: Content of: <section><para> #: en/soundConfig.xml:11 msgid "" "In this screen the name of the driver that the installer chose for your " "sound card is given, which will be the default driver if one exists." msgstr "" #. type: Content of: <section><para> #: en/soundConfig.xml:14 msgid "" "The default driver should work without problems. However, if after install " "you do encounter problems, then run <command>draksound</command> or start " "this tool via MCC (Mageia Control Center), by choosing the " "<guilabel>Hardware</guilabel> tab and clicking on <guilabel>Sound " "Configuration</guilabel> at the top right of the screen." msgstr "" #. type: Content of: <section><para> #: en/soundConfig.xml:19 msgid "" "With this tool, you can choose which backend will become the sound server, " "so manage the sound. You have the choice between pulseaudio and pipewire. " "For the second, you can choose a session manager <literal>Wireplumber</" "literal> or <literal>Pipewire Media Session</literal>. After applying the " "new configuration, the needed packages will be installed and services " "configured." msgstr "" #. type: Content of: <section><section><info><title> #: en/soundConfig.xml:22 msgid "Advanced" msgstr "Avancerat" #. type: Content of: <section><section><para> #: en/soundConfig.xml:24 msgid "" "Clicking <emphasis role=\"bold\"><guibutton>Advanced</guibutton></emphasis> " "in this screen, you will have the choice to reset the sound mixer " "configuration to default values." msgstr "" #. type: Content of: <section><info><title> #: en/takeOverHdConfirm.xml:10 msgid "Confirm hard disk to be formatted" msgstr "Bekräfta hårddisken som ska formateras" #. Made by marja on 2012 04 03 #. test comment - johnr #. 2012-04-24 marja - replaced "if you are not sure you selected the correct #. hard disk." with "if you are not sure about your choice", because I'm sure I #. saw this help screen when I had only one HD #. 2013-05-05 marja added screenshot #. 2018/02/15 apb: Text and typography #. 2018/02/20 apb: Change the 2 paras to itemized listitems. #. type: Content of: <section><mediaobject> #: en/takeOverHdConfirm.xml:29 msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-takeOverHdConfirm.png\" format=\"PNG\"/> </imageobject> <imageobject " "condition=\"live\"> <imagedata align=\"center\" fileref=\"live-" "takeOverHdConfirm.png\" format=\"PNG\"/> </imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-takeOverHdConfirm.png\" format=\"PNG\"/> </imageobject> <imageobject " "condition=\"live\"> <imagedata align=\"center\" fileref=\"live-" "takeOverHdConfirm.png\" format=\"PNG\"/> </imageobject>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/takeOverHdConfirm.xml:42 msgid "" "Click on <emphasis>Previous</emphasis> if you are at all unsure about your " "choice." msgstr "Klicka på <emphasis>Föregående</emphasis> om du är osäker på ditt val." #. type: Content of: <section><itemizedlist><listitem><para> #: en/takeOverHdConfirm.xml:48 msgid "" "Click on <emphasis>Next</emphasis> to proceed if you are sure that it is OK " "to erase <emphasis role=\"bold\">every</emphasis> partition, <emphasis role=" "\"bold\">every</emphasis> operating system and <emphasis role=\"bold\">all " "data</emphasis> that might be on that hard disk." msgstr "" #. type: Content of: <section><info><title> #: en/testing.xml:11 msgid "Testing Mageia as Live system" msgstr "Testar Mageia som ett Live-system" #. type: Content of: <section><section><info><title> #: en/testing.xml:16 msgid "Live mode" msgstr "Live-läge" #. type: Content of: <section><section><para> #: en/testing.xml:19 msgid "" "This is the screen you will see if you selected the <emphasis role=\"bold" "\">Boot Mageia </emphasis>option from the Live media menu." msgstr "" #. type: Content of: <section><section><mediaobject> #: en/testing.xml:23 msgid "<imageobject> <imagedata fileref=\"live-liveMode.png\"/> </imageobject>" msgstr "" "<imageobject> <imagedata fileref=\"live-liveMode.png\"/> </imageobject>" #. type: Content of: <section><section><section><info><title> #: en/testing.xml:30 msgid "Testing hardware" msgstr "Testar hårdvara" #. type: Content of: <section><section><section><para> #: en/testing.xml:33 msgid "" "One of the aims of using the Live mode is to test that your hardware is " "correctly managed by Mageia. You can check if all devices have a driver in " "the Hardware section of the Mageia Control Center:" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:40 msgid "network interface: configure it with net_applet" msgstr "nätverksgränssnitt: konfigurera det med net_applet" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:44 msgid "graphics card: if you see the previous screen, it's already OK." msgstr "grafikkort: om du ser den föregående skärmen så är det redan OK." #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:49 msgid "sound: a jingle has already been played" msgstr "ljud: en jingel har redan spelats upp" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:53 msgid "printer: configure your printer/s and print a test page" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:57 msgid "scanner: scan a document from ..." msgstr "skanner: skanna ett dokument från ..." #. type: Content of: <section><section><section><para> #: en/testing.xml:61 msgid "" "If everything is satisfactory, you can proceed with the installation. If " "not, you can use the <emphasis>Quit</emphasis> button to exit." msgstr "" #. type: Content of: <section><section><section><note><para> #: en/testing.xml:66 msgid "" "The configuration settings you apply here are carried over if you decide to " "proceed with the installation." msgstr "" #. type: Content of: <section><section><section><info><title> #: en/testing.xml:73 msgid "Launch installation" msgstr "Påbörja installationen" #. type: Content of: <section><section><section><para> #: en/testing.xml:76 msgid "" "To launch the installation of the Live DVD to a hard disk or SSD drive, " "simply click the <emphasis>Install on Hard Disk</emphasis> icon on the Live " "desktop. You will then see this screen, followed by the <link linkend=" "\"doPartitionDisks\">Partitioning</link> step." msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/testing.xml:82 msgid "" "<imageobject> <imagedata fileref=\"live-liveMode-install.png\"/> </" "imageobject>" msgstr "" "<imageobject> <imagedata fileref=\"live-liveMode-install.png\"/> </" "imageobject>" #. type: Content of: <section><info><title> #: en/uninstall-Mageia.xml:10 msgid "Uninstalling Mageia" msgstr "Avinstallera Mageia" #. type: Content of: <section><para> #: en/uninstall-Mageia.xml:18 msgid "" "If Mageia didn't convince you or you can't install it correctly - in short " "you want get rid of it - that is your right and Mageia also gives you the " "possibility to uninstall. This is not true for every operating system." msgstr "" "Om Mageia inte övertygade dig eller om du inte kan installera det korrekt - " "kort sagt så vill du göra dig av med det - det är din rätt och Mageia ger " "dig också möjlighet att avinstallera. Så är det inte för varje " "operativsystem." #. type: Content of: <section><para> #: en/uninstall-Mageia.xml:23 msgid "" "After backing up your data, reboot your Mageia installation DVD and select " "<emphasis>Rescue system</emphasis>, then <emphasis>Restore Windows boot " "loader</emphasis>. At the next boot, you will only have Windows, with no " "option to choose your Mageia operating system." msgstr "" #. type: Content of: <section><para> #: en/uninstall-Mageia.xml:28 msgid "" "In Windows, to recover the space used by Mageia partitions: click on " "<menuchoice> <guimenu>Start</guimenu> <guimenuitem>Control Panel</" "guimenuitem> <guimenuitem>Administrative Tools</guimenuitem> " "<guimenuitem>Computer Management</guimenuitem> <guimenuitem>Storage</" "guimenuitem> <guimenuitem>Disk Management</guimenuitem> </menuchoice>. You " "will recognise a Mageia partition because they are labeled <literal>Unknown</" "literal>, and also by their size and place on the disk. Right-click on each " "of these partitions and select <emphasis>Delete</emphasis> to free up the " "space." msgstr "" #. type: Content of: <section><para> #: en/uninstall-Mageia.xml:46 msgid "" "If you are using Windows XP, you can create a new partition and format it " "(FAT32 or NTFS). It will then get a partition letter." msgstr "" #. type: Content of: <section><para> #: en/uninstall-Mageia.xml:49 msgid "" "If you have Vista or 7, you have one more possibility, you can extend the " "existing partition that is at the left of the freed space. There are other " "partitioning tools that can be used, such as <emphasis role=\"bold" "\">gparted</emphasis>, available for both Windows and Linux. As always, when " "changing partitions, be very careful to back up anything important to you." msgstr "" #. type: Content of: <section><info><title> #: en/unused.xml:3 msgid "Keep or delete unused material" msgstr "Behåll eller radera oanvänt material" #. 2018/03/03 apb: Adjusted text and updated SC's to Mga6. #. type: Content of: <section><mediaobject> #: en/unused.xml:9 msgid "" "<imageobject> <imagedata format=\"PNG\" xml:id=\"unused-im1\" fileref=\"live-" "unused.png\" align=\"center\" revision=\"1\"/> </imageobject>" msgstr "" "<imageobject> <imagedata format=\"PNG\" xml:id=\"unused-im1\" fileref=\"live-" "unused.png\" align=\"center\" revision=\"1\"/> </imageobject>" #. type: Content of: <section><para> #: en/unused.xml:14 msgid "" "In this step, the installer looks for unused locales packages and unused " "hardware packages and you are then given an opportunity to delete them." msgstr "" #. type: Content of: <section><para> #: en/unused.xml:18 msgid "" "If you do not foresee a case where your installation may need to run on " "different hardware, or that you might need additional localization files " "then you might wish to accept this proposal." msgstr "" #. type: Content of: <section><para> #: en/unused.xml:22 msgid "" "Clicking <emphasis>Advanced</emphasis> will list the unused hardware and " "localization files that will be removed if you proceed." msgstr "" #. type: Content of: <section><mediaobject> #: en/unused.xml:26 msgid "" "<imageobject> <imagedata fileref=\"../live-unused-InstallationProgress.png\"/" "> </imageobject>" msgstr "" "<imageobject> <imagedata fileref=\"../live-unused-InstallationProgress.png\"/" "> </imageobject>" #. type: Content of: <section><para> #: en/unused.xml:31 msgid "" "The next step is the copying of files to hard disk. This process should just " "take a little while to complete. When it is finishing you will briefly get a " "blank screen - this is normal." msgstr "" #~ msgid "" #~ "<imageobject> <imagedata align=\"center\" fileref=\"dx2-soundConfig.png\" " #~ "format=\"PNG\" revision=\"1\" xml:id=\"soundConfig-im1\"/> </imageobject>" #~ msgstr "" #~ "<imageobject> <imagedata align=\"center\" fileref=\"dx2-soundConfig.png\" " #~ "format=\"PNG\" revision=\"1\" xml:id=\"soundConfig-im1\"/> </imageobject>"