Zavést Mageiu jako živý systém
Zavedení z datového nosiče
You can boot directly from a Live DVD or USB. Usually, you just need to plug
the USB device in or place the DVD in the drive and restart the computer.
If the computer does not automatically boot from the USB or DVD you may need
to reconfigure your BIOS Boot Disk priority. Alternatively, you might try
accessing the boot device menu to select a device from which the computer
will boot.
To access the BIOS or boot menu when the computer is starting, you can try
pressing either F2, Del or
Esc for the BIOS, or Esc,
F8, F10 or F11 for the
boot device menu. These (fairly common) keys are just a selection of
possible options though.
The actual screen that you will first see when booting from the Live media
will depend on whether your computer motherboard is of the Legacy (BIOS) or
UEFI type.
V zastaralém režimu BIOS/CSM
První obrazovka během spouštění v režimu BIOS
Nabídka
Zavést Mageiu
This option will boot the Mageia Live system from the connected DVD/USB
media (expect a very slow system compared to an installed OS).
Once the boot is done, you can proceed to the installation.
+ použít nesvobodné video ovladače (pomalejší
zavedení)
Boot the Mageia Live system using non-free video drivers
Install Mageia
This option will install Mageia to a hard disk.
+ použít nesvobodné video ovladače (pomalejší
zavedení)
Install Mageia using non-free video drivers
Test paměti
Test the installed RAM by performing multiple read and write
operations. Reboot to end the test.
F2 Jazyk
Press F2 to have the installer use a specific language
during the installation. Use the arrow keys to select the language then
press Enter.
V režimu UEFI
First screen while booting in UEFI mode
Nabídka
Zavést Mageiu
This option will boot the Mageia Live system from the connected DVD/USB
media (expect a very slow system compared to an installed OS). Once the
boot is done, you can proceed to the installation
Install Mageia
This option will install Mageia to a hard disk.
F2 Jazyk
Press F2 to have the installer use a specific language
during the installation. Use the arrow keys to select the language then
press Enter.
If you booted from a USB stick, you will see the above menu options
duplicated, and in this case, you should choose from the menu pair that will
be suffixed with "USB".